## Issue Addressed
Closes#2052
## Proposed Changes
- Refactor the attester/proposer duties endpoints in the BN
- Performance improvements
- Fixes some potential inconsistencies with the dependent root fields.
- Removes `http_api::beacon_proposer_cache` and just uses the one on the `BeaconChain` instead.
- Move the code for the proposer/attester duties endpoints into separate files, for readability.
- Refactor the `DutiesService` in the VC
- Required to reduce the delay on broadcasting new blocks.
- Gets rid of the `ValidatorDuty` shim struct that came about when we adopted the standard API.
- Separate block/attestation duty tasks so that they don't block each other when one is slow.
- In the VC, use `PublicKeyBytes` to represent validators instead of `PublicKey`. `PublicKey` is a legit crypto object whilst `PublicKeyBytes` is just a byte-array, it's much faster to clone/hash `PublicKeyBytes` and this change has had a significant impact on runtimes.
- Unfortunately this has created lots of dust changes.
- In the BN, store `PublicKeyBytes` in the `beacon_proposer_cache` and allow access to them. The HTTP API always sends `PublicKeyBytes` over the wire and the conversion from `PublicKey` -> `PublickeyBytes` is non-trivial, especially when queries have 100s/1000s of validators (like Pyrmont).
- Add the `state_processing::state_advance` mod which dedups a lot of the "apply `n` skip slots to the state" code.
- This also fixes a bug with some functions which were failing to include a state root as per [this comment](072695284f/consensus/state_processing/src/state_advance.rs (L69-L74)). I couldn't find any instance of this bug that resulted in anything more severe than keying a shuffling cache by the wrong block root.
- Swap the VC block service to use `mpsc` from `tokio` instead of `futures`. This is consistent with the rest of the code base.
~~This PR *reduces* the size of the codebase 🎉~~ It *used* to reduce the size of the code base before I added more comments.
## Observations on Prymont
- Proposer duties times down from peaks of 450ms to consistent <1ms.
- Current epoch attester duties times down from >1s peaks to a consistent 20-30ms.
- Block production down from +600ms to 100-200ms.
## Additional Info
- ~~Blocked on #2241~~
- ~~Blocked on #2234~~
## TODO
- [x] ~~Refactor this into some smaller PRs?~~ Leaving this as-is for now.
- [x] Address `per_slot_processing` roots.
- [x] Investigate slow next epoch times. Not getting added to cache on block processing?
- [x] Consider [this](072695284f/beacon_node/store/src/hot_cold_store.rs (L811-L812)) in the scenario of replacing the state roots
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
While investigating an incorrect head + target vote for the epoch boundary block 708544, I noticed that the state advance failed to prime the proposer cache, as per these logs:
```
Mar 09 21:42:47.448 DEBG Subscribing to subnet target_slot: 708544, subnet: Y, service: attestation_service
Mar 09 21:49:08.063 DEBG Advanced head state one slot current_slot: 708543, state_slot: 708544, head_root: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: state_advance
Mar 09 21:49:08.063 DEBG Completed state advance initial_slot: 708543, advanced_slot: 708544, head_root: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: state_advance
Mar 09 21:49:14.787 DEBG Proposer shuffling cache miss block_slot: 708544, block_root: 0x9b14bf68667ab1d9c35e6fd2c95ff5d609aa9e8cf08e0071988ae4aa00b9f9fe, parent_slot: 708543, parent_root: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: beacon
Mar 09 21:49:14.800 DEBG Successfully processed gossip block root: 0x9b14bf68667ab1d9c35e6fd2c95ff5d609aa9e8cf08e0071988ae4aa00b9f9fe, slot: 708544, graffiti: , service: beacon
Mar 09 21:49:14.800 INFO New block received hash: 0x9b14…f9fe, slot: 708544
Mar 09 21:49:14.984 DEBG Head beacon block slot: 708544, root: 0x9b14…f9fe, finalized_epoch: 22140, finalized_root: 0x28ec…29a7, justified_epoch: 22141, justified_root: 0x59db…e451, service: beacon
Mar 09 21:49:15.055 INFO Unaggregated attestation validator: XXXXX, src: api, slot: 708544, epoch: 22142, delay_ms: 53, index: Y, head: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: val_mon
Mar 09 21:49:17.001 DEBG Slot timer sync_state: Synced, current_slot: 708544, head_slot: 708544, head_block: 0x9b14…f9fe, finalized_epoch: 22140, finalized_root: 0x28ec…29a7, peers: 55, service: slot_notifier
```
The reason for this is that the condition was backwards, so that whole block of code was unreachable.
Looking at the attestations for the block included in the block after, we can see that lots of validators missed it. Some of them may be Lighthouse v1.1.1-v1.2.0-rc.0, but it's probable that they would have missed even with the proposer cache primed, given how late the block 708544 arrived (the cache miss occurred 3.787s after the slot start): https://beaconcha.in/block/708545#attestations
This is a small PR which prevents unwanted bootnodes from being added to the DHT and being dialed when the `--disable-discovery` flag is set.
The main reason one would want to disable discovery is to connect to a fix set of peers. Currently, regardless of what the user does, Lighthouse will populate its DHT with previously known peers and also fill it with the spec's bootnodes. It will then dial the bootnodes that are capable of being dialed. This prevents testing with a fixed peer list.
This PR prevents these excess nodes from being added and dialed if the user has set `--disable-discovery`.
## Issue Addressed
NA
## Proposed Changes
- Use the pre-states from #2174 during block production.
- Running this on Pyrmont shows block production times dropping from ~550ms to ~150ms.
- Create `crit` and `warn` logs when a block is published to the API later than we expect.
- On mainnet we are issuing a warn if the block is published more than 1s later than the slot start and a crit for more than 3s.
- Rename some methods on the `SnapshotCache` for clarity.
- Add the ability to pass the state root to `BeaconChain::produce_block_on_state` to avoid computing a state root. This is a very common LH optimization.
- Add a metric that tracks how late we broadcast blocks received from the HTTP API. This is *technically* a duplicate of a `ValidatorMonitor` log, but I wanted to have it for the case where we aren't monitoring validators too.
## Issue Addressed
Closes#1787
## Proposed Changes
* Abstract the `ValidatorPubkeyCache` over a "backing" which is either a file (legacy), or the database.
* Implement a migration from schema v2 to schema v3, whereby the contents of the cache file are copied to the DB, and then the file is deleted. The next release to include this change must be a minor version bump, and we will need to warn users of the inability to downgrade (this is our first DB schema change since mainnet genesis).
* Move the schema migration code from the `store` crate into the `beacon_chain` crate so that it can access the datadir and the `ValidatorPubkeyCache`, etc. It gets injected back into the `store` via a closure (similar to what we do in fork choice).
## Issue Addressed
NA
## Problem this PR addresses
There's an issue where Lighthouse is banning a lot of peers due to the following sequence of events:
1. Gossip block 0xabc arrives ~200ms early
- It is propagated across the network, with respect to [`MAXIMUM_GOSSIP_CLOCK_DISPARITY`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/p2p-interface.md#why-is-there-maximum_gossip_clock_disparity-when-validating-slot-ranges-of-messages-in-gossip-subnets).
- However, it is not imported to our database since the block is early.
2. Attestations for 0xabc arrive, but the block was not imported.
- The peer that sent the attestation is down-voted.
- Each unknown-block attestation causes a score loss of 1, the peer is banned at -100.
- When the peer is on an attestation subnet there can be hundreds of attestations, so the peer is banned quickly (before the missed block can be obtained via rpc).
## Potential solutions
I can think of three solutions to this:
1. Wait for attestation-queuing (#635) to arrive and solve this.
- Easy
- Not immediate fix.
- Whilst this would work, I don't think it's a perfect solution for this particular issue, rather (3) is better.
1. Allow importing blocks with a tolerance of `MAXIMUM_GOSSIP_CLOCK_DISPARITY`.
- Easy
- ~~I have implemented this, for now.~~
1. If a block is verified for gossip propagation (i.e., signature verified) and it's within `MAXIMUM_GOSSIP_CLOCK_DISPARITY`, then queue it to be processed at the start of the appropriate slot.
- More difficult
- Feels like the best solution, I will try to implement this.
**This PR takes approach (3).**
## Changes included
- Implement the `block_delay_queue`, based upon a [`DelayQueue`](https://docs.rs/tokio-util/0.6.3/tokio_util/time/delay_queue/struct.DelayQueue.html) which can store blocks until it's time to import them.
- Add a new `DelayedImportBlock` variant to the `beacon_processor::WorkEvent` enum to handle this new event.
- In the `BeaconProcessor`, refactor a `tokio::select!` to a struct with an explicit `Stream` implementation. I experienced some issues with `tokio::select!` in the block delay queue and I also found it hard to debug. I think this explicit implementation is nicer and functionally equivalent (apart from the fact that `tokio::select!` randomly chooses futures to poll, whereas now we're deterministic).
- Add a testing framework to the `beacon_processor` module that tests this new block delay logic. I also tested a handful of other operations in the beacon processor (attns, slashings, exits) since it was super easy to copy-pasta the code from the `http_api` tester.
- To implement these tests I added the concept of an optional `work_journal_tx` to the `BeaconProcessor` which will spit out a log of events. I used this in the tests to ensure that things were happening as I expect.
- The tests are a little racey, but it's hard to avoid that when testing timing-based code. If we see CI failures I can revise. I haven't observed *any* failures due to races on my machine or on CI yet.
- To assist with testing I allowed for directly setting the time on the `ManualSlotClock`.
- I gave the `beacon_processor::Worker` a `Toolbox` for two reasons; (a) it avoids changing tons of function sigs when you want to pass a new object to the worker and (b) it seemed cute.
## Issue Addressed
- Resolves#2215
## Proposed Changes
Addresses a potential loop when the majority of peers indicate that we are contactable via an IPv6 address.
See https://github.com/sigp/discv5/pull/62 for further rationale.
## Additional Info
The alternative to this PR is to use `--disable-enr-auto-update` and then manually supply an `--enr-address` and `--enr-upd-port`. However, that requires the user to know their IP addresses in order for discovery to work properly. This might not be practical/achievable for some users, hence this hotfix.
The current implementation assumes the range offset of slots downloaded on a batch to equal zero. This conflicts with the condition to consider this chain as sync. For finalized sync, it results in one extra batch being downloaded which can't be processed.
CC @wemeetagain
## Issue Addressed
NA
## Proposed Changes
Add an optimization to perform `per_slot_processing` from the *leading-edge* of block processing to the *trailing-edge*. Ultimately, this allows us to import the block at slot `n` faster because we used the tail-end of slot `n - 1` to perform `per_slot_processing`.
Additionally, add a "block proposer cache" which allows us to cache the block proposer for some epoch. Since we're now doing trailing-edge `per_slot_processing`, we can prime this cache with the values for the next epoch before those blocks arrive (assuming those blocks don't have some weird forking).
There were several ancillary changes required to achieve this:
- Remove the `state_root` field of `BeaconSnapshot`, since there's no need to know it on a `pre_state` and in all other cases we can just read it from `block.state_root()`.
- This caused some "dust" changes of `snapshot.beacon_state_root` to `snapshot.beacon_state_root()`, where the `BeaconSnapshot::beacon_state_root()` func just reads the state root from the block.
- Rename `types::ShuffingId` to `AttestationShufflingId`. I originally did this because I added a `ProposerShufflingId` struct which turned out to be not so useful. I thought this new name was more descriptive so I kept it.
- Address https://github.com/ethereum/eth2.0-specs/pull/2196
- Add a debug log when we get a block with an unknown parent. There was previously no logging around this case.
- Add a function to `BeaconState` to compute all proposers for an epoch without re-computing the active indices for each slot.
## Additional Info
- ~~Blocked on #2173~~
- ~~Blocked on #2179~~ That PR was wrapped into this PR.
- There's potentially some places where we could avoid computing the proposer indices in `per_block_processing` but I haven't done this here. These would be an optimization beyond the issue at hand (improving block propagation times) and I think this PR is already doing enough. We can come back for that later.
## TODO
- [x] Tidy, improve comments.
- [x] ~~Try avoid computing proposer index in `per_block_processing`?~~
## Issue Addressed
NA
## Proposed Changes
Rust 1.50 has landed 🎉
The shiny new `clippy` peers down upon us mere mortals with disgust. Brutish peasants wrapping our `usize`s in superfluous `Option`s... tsk tsk.
I've performed the goat sacrifice and corrected our evil ways in this PR. Tonight we shall pray that Github Actions bestows the almighty green tick upon us.
## Additional Info
NA
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
resolves#2129resolves#2099
addresses some of #1712
unblocks #2076
unblocks #2153
## Proposed Changes
- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR.
- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.
- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue` --> PR in discv5: https://github.com/sigp/discv5/pull/58
## Additional Info
tokio 1.0 changes that required some changes in lighthouse:
- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Replaces use of `format!` in `slog` logging with it's special no-allocation `?` and `%` shortcuts. According to a `heaptrack` analysis today over about a period of an hour, this will reduce temporary allocations by at least 4%.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds some metrics to track delays regarding:
- LH processing of blocks
- delays receiving blocks from other nodes.
## Additional Info
NA
## Issue Addressed
- Resolves#2064
## Proposed Changes
Adds a `ValidatorMonitor` struct which provides additional logging and Grafana metrics for specific validators.
Use `lighthouse bn --validator-monitor` to automatically enable monitoring for any validator that hits the [subnet subscription](https://ethereum.github.io/eth2.0-APIs/#/Validator/prepareBeaconCommitteeSubnet) HTTP API endpoint.
Also, use `lighthouse bn --validator-monitor-pubkeys` to supply a list of validators which will always be monitored.
See the new docs included in this PR for more info.
## TODO
- [x] Track validator balance, `slashed` status, etc.
- [x] ~~Register slashings in current epoch, not offense epoch~~
- [ ] Publish Grafana dashboard, update TODO link in docs
- [x] ~~#2130 is merged into this branch, resolve that~~
## Issue Addressed
NA
## Proposed Changes
Fixes a bug that I missed during a review in #2163. I found this bug by observing that nodes were receiving far less attestations (~1/2 of previous).
I'm not certain on *exactly* how this mistake manifested in a reduction in attestations, but the mistake touches so much code that I think it's reasonable to declare that this it the cause of the observed issue (drop in attestations).
## Additional Info
NA
## Issue Addressed
The non-finality period on Pyrmont between epochs [`9114`](https://pyrmont.beaconcha.in/epoch/9114) and [`9182`](https://pyrmont.beaconcha.in/epoch/9182) was contributed to by all the `lighthouse_team` validators going down. The nodes saw excessive CPU and RAM usage, resulting in the system to kill the `lighthouse bn` process. The `Restart=on-failure` directive for `systemd` caused the process to bounce in ~10-30m intervals.
Diagnosis with `heaptrack` showed that the `BeaconChain::produce_unaggregated_attestation` function was calling `store::beacon_state::get_full_state` and sometimes resulting in a tree hash cache allocation. These allocations were approximately the size of the hosts physical memory and still allocated when `lighthouse bn` was killed by the OS.
There was no CPU analysis (e.g., `perf`), but the `BeaconChain::produce_unaggregated_attestation` is very CPU-heavy so it is reasonable to assume it is the cause of the excessive CPU usage, too.
## Proposed Changes
`BeaconChain::produce_unaggregated_attestation` has two paths:
1. Fast path: attesting to the head slot or later.
2. Slow path: attesting to a slot earlier than the head block.
Path (2) is the only path that calls `store::beacon_state::get_full_state`, therefore it is the path causing this excessive CPU/RAM usage.
This PR removes the current functionality of path (2) and replaces it with a static error (`BeaconChainError::AttestingPriorToHead`).
This change reduces the generality of `BeaconChain::produce_unaggregated_attestation` (and therefore [`/eth/v1/validator/attestation_data`](https://ethereum.github.io/eth2.0-APIs/#/Validator/produceAttestationData)), but I argue that this functionality is an edge-case and arguably a violation of the [Honest Validator spec](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/validator.md).
It's possible that a validator goes back to a prior slot to "catch up" and submit some missed attestations. This change would prevent such behaviour, returning an error. My concerns with this catch-up behaviour is that it is:
- Not specified as "honest validator" attesting behaviour.
- Is behaviour that is risky for slashing (although, all validator clients *should* have slashing protection and will eventually fail if they do not).
- It disguises clock-sync issues between a BN and VC.
## Additional Info
It's likely feasible to implement path (2) if we implement some sort of caching mechanism. This would be a multi-week task and this PR gets the issue patched in the short term. I haven't created an issue to add path (2), instead I think we should implement it if we get user-demand.
## Issue Addressed
NA
## Proposed Changes
Copied from #2083, changes the config milliseconds_per_slot to seconds_per_slot to avoid errors when slot duration is not a multiple of a second. To avoid deserializing old serialized data (with milliseconds instead of seconds) the Serialize and Deserialize derive got removed from the Spec struct (isn't currently used anyway).
This PR replaces #2083 for the purpose of fixing a merge conflict without requiring the input of @blacktemplar.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
NA
## Proposed Changes
As per #2100, uses derives from the sturm library to implement AsRef<str> and AsStaticRef to easily get str values from enums without creating new Strings. Furthermore unifies all attestation error counter into one IntCounterVec vector.
These works are originally by @blacktemplar, I've just created this PR so I can resolve some merge conflicts.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
`test_dht_persistence` failing
## Proposed Changes
Bind `NetworkService::start` to an underscore prefixed variable rather than `_`. `_` was causing it to be dropped immediately
This was failing 5/100 times before this update, but I haven't been able to get it to fail after updating it
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Fixes#2146
## Proposed Changes
Change ping timeout errors to return `LowToleranceErrors` so that we disconnect faster on internet failures/changes.
## Issue Addressed
`cargo audit` is failing because of a potential for an overflow in the version of `smallvec` we're using
## Proposed Changes
Update to the latest version of `smallvec`, which has the fix
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Fixes#2141
Remove [tempdir](https://docs.rs/tempdir/0.3.7/tempdir/) in favor of [tempfile](https://docs.rs/tempfile/3.1.0/tempfile/).
## Proposed Changes
`tempfile` has a slightly different api that makes creating temp folders with a name prefix a chore (`tempdir::TempDir::new("toto")` => `tempfile::Builder::new().prefix("toto").tempdir()`).
So I removed temp folder name prefix where I deemed it not useful.
Otherwise, the functionality is the same.
## Issue Addressed
Catching up to a recently merged API spec PR: https://github.com/ethereum/eth2.0-APIs/pull/119
## Proposed Changes
- Return an SSZ beacon state on `/eth/v1/debug/beacon/states/{stateId}` when passed this header: `accept: application/octet-stream`.
- requests to this endpoint with no `accept` header or an `accept` header and a value of `application/json` or `*/*` , or will result in a JSON response
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
None
## Proposed Changes
* Correct typo in one comment, elaborate some others.
* Add asserts to ensure comments match code.
* Eliminate one unnecessary `clone`.
## Additional Info
None
## Proposed Changes
<!-- Please list or describe the changes introduced by this PR. -->
Tweaked the error message for ease of investigation as `Failed to update eth1 cache` is used in multiple places. 😃
This is a little bit of a tip-of-the-iceberg PR. It houses a lot of code changes in the libp2p dependency.
This needs a bit of thorough testing before merging.
The primary code changes are:
- General libp2p dependency update
- Gossipsub refactor to shift compression into gossipsub providing performance improvements and improved API for handling compression
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
`@potuz` on the Eth R&D Discord observed that Lighthouse blocks on Pyrmont were always arriving at other nodes after at least 1 second. Part of this could be due to processing and slow propagation, but metrics also revealed that the Lighthouse nodes were usually taking 400-600ms to even just produce a block before broadcasting it.
I tracked the slowness down to the lack of a pre-built tree hash cache (THC) on the states being used for block production. This was due to using the head state for block production, which lacks a THC in order to keep fork choice fast (cloning a THC takes at least 30ms for 100k validators). This PR modifies block production to clone a state from the snapshot cache rather than the head, which speeds things up by 200-400ms by avoiding the tree hash cache rebuild. In practice this seems to have cut block production time down to 300ms or less. Ideally we could _remove_ the snapshot from the cache (and save the 30ms), but it is required for when we re-process the block after signing it with the validator client.
## Alternatives
I experimented with 2 alternatives to this approach, before deciding on it:
* Alternative 1: ensure the `head` has a tree hash cache. This is too slow, as it imposes a +30ms hit on fork choice, which currently takes ~5ms (with occasional spikes).
* Alternative 2: use `Arc<BeaconSnapshot>` in the snapshot cache and share snapshots between the cache and the `head`. This made fork choice blazing fast (1ms), and block production the same as in this PR, but had a negative impact on block processing which I don't think is worth it. It ended up being necessary to clone the full state from the snapshot cache during block production, imposing the +30ms penalty there _as well_ as in block production.
In contract, the approach in this PR should only impact block production, and it improves it! Yay for pareto improvements 🎉
## Additional Info
This commit (ac59dfa) is currently running on all the Lighthouse Pyrmont nodes, and I've added a dashboard to the Pyrmont grafana instance with the metrics.
In future work we should optimise the attestation packing, which consumes around 30-60ms and is now a substantial contributor to the total.
## Issue Addressed
- Resolves#1883
## Proposed Changes
This follows on from @blacktemplar's work in #2018.
- Allows the VC to connect to multiple BN for redundancy.
- Update the simulator so some nodes always need to rely on their fallback.
- Adds some extra deprecation warnings for `--eth1-endpoint`
- Pass `SignatureBytes` as a reference instead of by value.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
N/A
## Proposed Changes
Fixes multiple issues related to discovering of subnet peers.
1. Subnet discovery retries after yielding no results
2. Metadata updates if peer send older metadata
3. peerdb stores the peer subscriptions from gossipsub
## Issue Addressed
NA
## Proposed Changes
Fixes problems with slot times below 1 second which got revealed by running the syncing simulator with the default speedup time.
## Issue Addressed
Closes#2048
## Proposed Changes
* Broadcast slashings when the `--slasher-broadcast` flag is provided.
* In the process of implementing this I refactored the slasher service into its own crate so that it could access the network code without creating a circular dependency. I moved the responsibility for putting slashings into the op pool into the service as well, as it makes sense for it to handle the whole slashing lifecycle.
## Issue Addressed
N/A
## Proposed Changes
There seemed to be confusion among discord users on the eth1 fallback logging
```
WARN Error connecting to eth1 node. Trying fallback ..., endpoint: http://127.0.0.1:8545/, service: eth1_rpc
```
The assumption users seem to be making here is that it is trying the fallback and fallback=endpoint in the log.
This PR improves the logging to be like
```
WARN Error connecting to eth1 node endpoint, endpoint: http://127.0.0.1:8545/, action: trying fallbacks, service: eth1_rpc
```
I think this is a bit more clear that the endpoint that failed is the one in the log.
## Issue Addressed
Related to #1891, The error is not in the spec yet (see ethereum/eth2.0-specs#2131)
## Proposed Changes
Implement the proposed error, banning peers that send it
## Additional Info
NA
## Proposed Changes
Run cargo update and bump version in prep for v1.0.4 release
## Additional Info
Planning to merge this commit to `unstable`, test on Pyrmont and canary nodes, then push to `stable`.
## Issue Addressed
Users are reporting errors for sending attestations to peers. If the clock sync is a little out or we receive attestations before blocks, peers are being too harshly penalized. They can get scored many times per missing block and we typically need these peers on subnets.
## Proposed Changes
This removes the penalization for missing blocks with attestations. The penalty should be handled when #635 gets built as it will allow us to group attestations per missing block and penalize once.
## Issue Addressed
Closes#2028
Replaces #2059
## Proposed Changes
If writing to the database fails while importing a block, revert fork choice to the last version stored on disk. This prevents fork choice from being ahead of the blocks on disk. Having fork choice ahead is particularly bad if it is later successfully written to disk, because it renders the database corrupt (see #2028).
## Additional Info
* This mitigation might fail if the head+fork choice haven't been persisted yet, which can only happen at first startup (see #2067)
* This relies on it being OK for the head tracker to be ahead of fork choice. I figure this is tolerable because blocks only get added to the head tracker after successfully being written on disk _and_ to fork choice, so even if fork choice reverts a little bit, when the pruning algorithm runs, those blocks will still be on disk and OK to prune. The pruning algorithm also doesn't rely on heads being unique, technically it's OK for multiple blocks from the same linear chain segment to be present in the head tracker. This begs the question of #1785 (i.e. things would be simpler with the head tracker out of the way). Alternatively, this PR could just revert the head tracker as well (I'll look into this tomorrow).
## Issue Addressed
Closes#1264
## Proposed Changes
* Milagro BLS: tweak the feature flags so that Milagro doesn't get compiled if we're using BLST. Profiling showed that it was consuming about 1 minute of CPU time out of 60 minutes of CPU time (real time ~15 mins). A 1.6% saving.
* Reduce monomorphization: compiling for 3 different `EthSpec` types causes a heck of a lot of generic functions to be instantiated (monomorphized). Removing 2 of 3 cuts the LLVM+linking step from around 250 seconds to 180 seconds, a saving of 70 seconds (real time!). This applies only to `make` and not the CI build, because we test with the minimal spec on CI.
* Update `web3` crate to v0.13. This is perhaps the most controversial change, because it requires axing some deposit contract tools from `lcli`. I suspect these tools weren't used much anyway, and could be maintained separately, but I'm also happy to revert this change. However, it does save us a lot of compile time. With #1839, we now have 3 versions of Tokio (and all of Tokio's deps). This change brings us down to 2 versions, but 1 should be achievable once web3 (and reqwest) move to Tokio 0.3.
* Remove `lcli` from the Docker image. It's a dev tool and can be built from the repo if required.
## Issue Addressed
#2046
## Proposed Changes
The log was originally intended to verify the correct logic and ordering of events when scoring peers. The queued tasks can be structured in such a way that peers can be banned after they are disconnected. Therefore the error log is now downgraded to debug log.
## Issue Addressed
#1992 and #1987, and also to be considered a continuation of #1751
## Proposed Changes
many changed files but most are renaming to align the code with the semantics of `--network`
- remove the `--network` default value (in clap) and instead set it after checking the `network` and `testnet-dir` flags
- move `eth2_testnet_config` crate to `eth2_network_config`
- move `Eth2TestnetConfig` to `Eth2NetworkConfig`
- move `DEFAULT_HARDCODED_TESTNET` to `DEFAULT_HARDCODED_NETWORK`
- `beacon_node`s `get_eth2_testnet_config` loads the `DEFAULT_HARDCODED_NETWORK` if there is no network nor testnet provided
- `boot_node`s config loads the config same as the `beacon_node`, it was using the configuration only for preconfigured networks (That code is ~1year old so I asume it was not intended)
- removed a one year old comment stating we should try to emulate `https://github.com/eth2-clients/eth2-testnets/tree/master/nimbus/testnet1` it looks outdated (?)
- remove `lighthouse`s `load_testnet_config` in favor of `get_eth2_network_config` to centralize that logic (It had differences)
- some spelling
## Additional Info
Both the command of #1992 and the scripts of #1987 seem to work fine, same as `bn` and `vc`
## Issue Addressed
NA
## Proposed Changes
This was mostly done to find the reason why LH was dropping peers from Nimbus. It proved to be useful so I think it's worth it. But there is also some functional stuff here
- Add metrics for rpc errors per client, error type and direction
- Add metrics for downscoring events per source type, client and penalty type
- Add metrics for gossip validation results per client for non-accepted messages
- Make the RPC handler return errors and requests/responses in the order we see them
- Allow a small burst for the Ping rate limit, from 1 every 5 seconds to 2 every 10 seconds
- Send rate limiting errors with a particular code and use that same code to identify them. I picked something different to 128 since that is most likely what other clients are using for their own errors
- Remove some unused code in the `PeerAction` and the rpc handler
- Remove the unused variant `RateLimited`. tTis was never produced directly, since the only way to get the request's protocol is via de handler. The handler upon receiving from LH a response with an error (rate limited in this case) emits this event with the missing info (It was always like this, just pointing out that we do downscore rate limiting errors regardless of the change)
Metrics for Nimbus looked like this:
Downscoring events: `increase(libp2p_peer_actions_per_client{client="Nimbus"}[5m])`
![image](https://user-images.githubusercontent.com/26765164/101210880-862bf280-3676-11eb-94c0-399f0bf5aa2e.png)
RPC Errors: `increase(libp2p_rpc_errors_per_client{client="Nimbus"}[5m])`
![image](https://user-images.githubusercontent.com/26765164/101210997-ba071800-3676-11eb-847a-f32405ede002.png)
Unaccepted gossip message: `increase(gossipsub_unaccepted_messages_per_client{client="Nimbus"}[5m])`
![image](https://user-images.githubusercontent.com/26765164/101211124-f470b500-3676-11eb-9459-132ecff058ec.png)
## Issue Addressed
NA
## Proposed Changes
Updates out of date dependencies.
## Additional Info
See also https://github.com/sigp/lighthouse/issues/1712 for a list of dependencies that are still out of date and the resasons.
## Issue Addressed
Closes#2042
## Proposed Changes
Pass blocks that fail gossip verification to the slasher. Blocks that are successfully verified are not passed immediately, but will be passed as part of full block verification.
## Issue
Some eth1 clients are missing deposit logs on mainnet for multiple reasons (not fully synced, eth1 client issues) because of which we are getting `FailedToInsertDeposit` errors.
Ideally, LH should pick up where it left off after pointing it to a nice eth1 client endpoint (which has all deposits).
However, I have seen instances where LH keeps getting `FailedToInsertDeposit` even after switching to a good endpoint. Only deleting the beacon directory (which also wipes the eth1 cache) and resyncing the eth1 caches seems to be the solution. This wouldn't be great for mainnet if you have to sync your beacon node again as well.
## Proposed Changes
Add a `--purge-eth1-db` option which just wipes the eth1 cache and doesn't touch the rest of the beacon db.
Still need to investigate if and why LH isn't picking up where it left off for the deposit logs sync, but I think it would be good to have an option to just delete eth1 caches regardless.
## Issue Addressed
Resolves#1434 (this is the last major feature in the standard spec. There are only a couple of places we may be off-spec due to recent spec changes or ongoing discussion)
Partly addresses #1669
## Proposed Changes
- remove the websocket server
- remove the `TeeEventHandler` and `NullEventHandler`
- add server sent events according to the eth2 API spec
## Additional Info
This is according to the currently unmerged PR here: https://github.com/ethereum/eth2.0-APIs/pull/117
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2035
## Proposed Changes
Update 405's to 400's for failures when we are parsing path params.
## Additional Info
Haven't updated the same for non-standard endpoints
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fixes a couple of low hanging fruits.
- Fixes#2037
- `validators-dir` and `secrets-dir` flags don't really need to depend upon each other
- Fixes#2006 and Fixes#1995
Adds a `--privacy` CLI flag to the beacon node that users may opt into.
This does two things:
- Removes client identifying information from the identify libp2p protocol
- Changes the default graffiti to "" if no graffiti is set.
## Issue Addressed
NA
## Proposed Changes
- Log about eth1 whilst waiting for genesis.
- For the block and deposit caches, update them after each download instead of when *all* downloads are complete.
- This prevents the case where a single timeout error can cause us to drop *all* previously download blocks/deposits.
- Set `max_log_requests_per_update` to avoid timeouts due to very large log counts in a response.
- Set `max_blocks_per_update` to prevent a single update of the block cache to download an unreasonable number of blocks.
- This shouldn't have any affect in normal use, it's just a safe-guard against bugs.
- Increase the timeout for eth1 calls from 15s to 60s, as per @pawanjay176's experience with Infura.
## Additional Info
NA
## Issue Addressed
Following slog's documentation, this should help a bit with string allocations. I left it run for two days and mem usage is lower. This is of course anecdotal, but shouldn't harm anyway
## Proposed Changes
remove `String` creation in logs when possible
## Issue Addressed
NA
## Proposed Changes
This was causing:
```
Nov 28 21:56:08.154 ERRO slog-async: logger dropped messages due to channel overflow, count: 44, service: libp2p
```
## Additional Info
NA
Update lighthouse to version `v1.0.2`.
There are two major updates in this version:
- Updates to the task executor to tokio 0.3 and all sub-dependencies relying on core execution, including libp2p
- Update BLST
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
part of #1883
## Proposed Changes
Adds a new cli argument `--eth1-endpoints` that can be used instead of `--eth1-endpoint` to specify a comma-separated list of endpoints. If the first endpoint returns an error for some request the other endpoints are tried in the given order.
## Additional Info
Currently if the first endpoint fails the fallbacks are used silently (except for `try_fallback_test_endpoint` that is used in `do_update` which logs a `WARN` for each endpoint that is not reachable). A question is if we should add more logs so that the user gets warned if his main endpoint is for example just slow and sometimes hits timeouts.
## Proposed Changes
A user on Discord reported build issues when trying to compile Lighthouse checked out to a path with spaces in it. I've fixed the issue upstream in `leveldb-sys` (https://github.com/skade/leveldb-sys/pull/22), but rather than waiting for a new release of the `leveldb` crate, we can also work around the issue by disabling Snappy in LevelDB, which we weren't using anyway.
This may also have the side-effect of slightly improving compilation times, as LevelDB+Snappy was found to be a substantial contributor to build time (although I'm not sure how much was LevelDB and how much was Snappy).
## Issue Addressed
- Add metrics to keep track of peer counts by sync type
- Add metric to keep track of the number of syncing chains in range
## Proposed Changes
Plugin to the network metrics update interval and update too the counts for peers wrt to their sync status with us
## Additional Info
For the peer counts
- By the way it is implemented the numbers won't always match to the total peer count in the `libp2p` metric.
- Updating the gauge with every change is messy because it requires to be updated on connection (in the `eth2_libp2p` crate, while metrics are defined in the `network` crate) on Goodbye sent (for an `IrrelevantPeer`) either in the `beacon_processor` or the `peer_manager`, and on disconnection. Since this is not a critical metric I think counting once every second is enough. If you think more accuracy is needed we can do it too, but it would be harder to maintain)
ATM those look like this
![image](https://user-images.githubusercontent.com/26765164/100275387-22137b00-2f60-11eb-93b9-94b0f265240c.png)
## Issue Addressed
NA
## Proposed Changes
- Adds a HTTP server to the VC which provides Prometheus metrics.
- Moves the health metrics into the `lighthouse_metrics` crate so it can be shared between BN/VC.
- Sprinkle some metrics around the VC.
- Update the book to indicate that we now have VC metrics.
- Shifts the "waiting for genesis" logic later in the `ProductionValidatorClient::new_from_cli`
- This is worth attention during the review.
## Additional Info
- ~~`clippy` has some new lints that are failing. I'll deal with that in another PR.~~
## Issue Addressed
Two issues related to empty batches
- Chain target's was not being advanced when the batch was successful, empty and the chain didn't have an optimistic batch
- Not switching finalized chains. We now switch finalized chains requiring a minimum work first
## Issue Addressed
Resolves#1890
## Proposed Changes
Change the slasher database schema to key indexed attestations by `(target_epoch, indexed_attestation_root)` instead of just `indexed_attestation_root`. This allows more straight-forward pruning (linear scan), that is also "re-entrant". By re-entrant, we mean that a pruning pass that gets stuck because of a `MapFull` error can attempt to commit midway, and be resumed later without issue. The previous pruning strategy for indexed attestations did not have this property. There was also a flaw in the previous pruning that could leave "zombie" indexed attestations in the database (ones not referenced by any attester record), which could build up and contribute to bloat (although in practice I think they occur quite infrequently).
## Additional Info
During testing I noticed that a `MapFull` error can still occur during the commit of the transaction itself, which is irritating, but not unbearable. This PR should at least reduce the frequency with which users need to manually resize their DB, and if the `MapFull` on commit rears its ugly head too often we could use a dynamic strategy (temporarily increase the size of the map until the transaction commits).
The extra bytes for the epoch make the database a bit heavier, so the size estimate docs have been updated to reflect this. This is also a breaking schema change, so anyone using a v0 database from a few hours ago will need to drop it and update 😅
This is an implementation of a slasher that lives inside the BN and can be enabled via `lighthouse bn --slasher`.
Features included in this PR:
- [x] Detection of attester slashing conditions (double votes, surrounds existing, surrounded by existing)
- [x] Integration into Lighthouse's attestation verification flow
- [x] Detection of proposer slashing conditions
- [x] Extraction of attestations from blocks as they are verified
- [x] Compression of chunks
- [x] Configurable history length
- [x] Pruning of old attestations and blocks
- [x] More tests
Future work:
* Focus on a slice of history separate from the most recent N epochs (e.g. epochs `current - K` to `current - M`)
* Run out-of-process
* Ingest attestations from the chain without a resync
Design notes are here https://hackmd.io/@sproul/HJSEklmPL
## Issue Addressed
- Resolves#1424
## Proposed Changes
Add a `GET lighthouse/staking` that returns 200 if the node is ready to stake (i.e., `--eth1` flag is present) or a 404 otherwise.
Whilst the VC is waiting for the genesis time to start (i.e., when the genesis state is known), check the `lighthouse/staking` endpoint and log an error if the node isn't configured for staking.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds the `--import-all-attestations` flag which tells the `network::AttestationService` to import/aggregate all attestations after verification (instead of only ones for subnets that are relevant to local validators).
This is useful for testing/debugging and also for creating back-up nodes that should be all cached up and ready for any validator.
## Additional Info
NA
## Issue Addressed
we have a log saying we add a peer to a chain, and an another one in case the chain is not syncing. To avoid needing to peer there two (and reduce log entries) simply log the chain's syncing state in the chain's KV
## Issue Addressed
Closes#1719
## Proposed Changes
Lift the internal `RwLock`s and `Mutex`es from the `Observed*` data structures to resolve the race conditions described in #1719.
Most of this work was done by @paulhauner on his `lift-locks` branch, I merely updated it for the current `master` and checked over it.
## Additional Info
I think it would be prudent to test this on a testnet or two before mainnet launch, just to be sure that the extra lock contention doesn't negatively impact performance.
## Issue Addressed
- Resolves#1945
## Proposed Changes
- As per #1945, fix a log message from the metrics server that was falsely claiming to be from the api server.
- Ensure successful api request logs are published to debug, not trace. This is something I've wanted to do for a while.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Caches later blocks than is required by `ETH1_FOLLOW_DISTANCE`.
- Adds logging to `warn` if the eth1 cache is insufficiently primed.
- Use `max_by_key` instead of `max_by` in `BeaconChain::Eth1Chain` since it's simpler.
- Rename `voting_period_start_timestamp` to `voting_target_timestamp` for accuracy.
## Additional Info
The reason for eating into the `ETH1_FOLLOW_DISTANCE` and caching blocks that are closer to the head is due to possibility for `SECONDS_PER_ETH1_BLOCK` to be incorrect (as is the case for the Pyrmont testnet on Goerli).
If `SECONDS_PER_ETH1_BLOCK` is too short, we'll skip back too far from the head and skip over blocks that would be valid [`is_candidate_block`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/validator.md#eth1-data) blocks. This was the case on the Pyrmont testnet and resulted in Lighthouse choosing blocks that were about 30 minutes older than is ideal.
## Issue Addressed
Resolves#1333
## Proposed Changes
- Remove `deposit_signature_set()` function
- Prevent deposits from being in `SignatureSets`
- User `Signature.verify()` to verify deposit signatures rather than a signature set which uses `fast_aggregate_verify()`
## Additional Info
n/a
## Issue Addressed
`BlocksByRange` requests were the main culprit of a series of timeouts to peer's requests in general because they produce build up in the router's processor. Those were moved to the blocking executor but a task is being spawned for each; also not ideal since the amount of resources we give to those is not controlled
## Proposed Changes
- Move `BlocksByRange` and `BlocksByRoots` to the `beacon_processor`. The processor crafts the responses and sends them.
- Move too the processing of `StatusMessage`s from other peers. This is a fast operation but it can also build up and won't scale if we keep it in the router (processing one at the time). These don't need to send an answer, so there is no harm in processing them "later" if that were to happen. Sending responses to status requests is still in the router, so we answer as soon as we see them.
- Some "extras" that are basically clean up:
- Split the `Worker` logic in sync methods (chain processing and rpc blocks), gossip methods (the majority of methods) and rpc methods (the new ones)
- Move the `status_message` function previously provided by the router's processor to a more central place since it is used by the router, sync, network_context and beacon_processor
- Some spelling
## Additional Info
What's left to decide/test more thoroughly is the length of the queues and the priority rules. @paulhauner suggested at some point to put status above attestations, and @AgeManning had described an importance of "protecting gossipsub" so my solution is leaving status requests in the router and RPC methods below attestations. Slashings and Exits are at the end.
## Issue Addressed
Catching up on a few eth2 spec updates:
## Proposed Changes
- adding query params to the `GET pool/attestations` endpoint
- allowing the `POST pool/attestations` endpoint to accept an array of attestations
- batching attestation submission
- moving `epoch` from a path param to a query param in the `committees` endpoint
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Removes most of the temporary string initializations in network metrics and replaces them by directly using `&str`. This further improves on PR https://github.com/sigp/lighthouse/pull/1895.
For the subnet id handling the current approach uses a build script to create a static map. This has the disadvantage that the build script hardcodes the number of subnets. If we want to use more than 64 subnets we need to adjust this in the build script.
## Additional Info
We still have some string initializations for the enum `PeerKind`. To also replace that by `&str` I created a PR in the libp2p dependency: https://github.com/sigp/rust-libp2p/pull/91. Either we wait with merging until this dependency PR is merged (and all conflicts with the newest libp2p version are resolved) or we just merge as is and I will create another PR when the dependency is ready.
## Issue Addressed
NA
## Proposed Changes
Users on Discord (and @protolambda) have experienced this error (or variants of it):
```
Failed to update eth1 cache: GetDepositLogsFailed("Eth1 node returned error: {\"code\":-32005,\"message\":\"query returned more than 10000 results\"}")
```
This PR allows users to reduce the span of blocks searched for deposit logs and therefore reduce the size of the return result. Hopefully experimentation with this flag can lead to finding a better default value.
## Additional Info
NA
## Issue Addressed
*Should* address #1917
## Proposed Changes
Stops the `BackgroupMigrator` rx channel from backing up with big `BeaconState` messages.
Looking at some logs from my Medalla node, we can see a discrepancy between the head finalized epoch and the migrator finalized epoch:
```
Nov 17 16:50:21.606 DEBG Head beacon block slot: 129214, root: 0xbc7a…0b99, finalized_epoch: 4033, finalized_root: 0xf930…6562, justified_epoch: 4035, justified_root: 0x206b…9321, service: beacon
Nov 17 16:50:21.626 DEBG Batch processed service: sync, processed_blocks: 43, last_block_slot: 129214, chain: 8274002112260436595, first_block_slot: 129153, batch_epoch: 4036
Nov 17 16:50:21.626 DEBG Chain advanced processing_target: 4036, new_start: 4036, previous_start: 4034, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.162 DEBG Completed batch received awaiting_batches: 5, blocks: 47, epoch: 4048, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.162 DEBG Requesting batch start_slot: 129601, end_slot: 129664, downloaded: 0, processed: 0, state: Downloading(16Uiu2HAmG3C3t1McaseReECjAF694tjVVjkDoneZEbxNhWm1nZaT, 0 blocks, 1273), epoch: 4050, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.654 DEBG Database compaction complete service: beacon
Nov 17 16:50:22.655 INFO Starting database pruning new_finalized_epoch: 2193, old_finalized_epoch: 2192, service: beacon
```
I believe this indicates that the migrator rx has a backed-up queue of `MigrationNotification` items which each contain a `BeaconState`.
## TODO
- [x] Remove finalized state requirement for op-pool
## Proposed Changes
In an attempt to fix OOM issues and database consistency issues observed by some users after the introduction of compaction in v0.3.4, this PR makes the following changes:
* Run compaction less often: roughly every 1024 epochs, including after long periods of non-finality. I think the division check proposed by Paul is pretty solid, and ensures we don't miss any events where we should be compacting. LevelDB lacks an easy way to check the size of the DB, which would be another good trigger.
* Make it possible to disable the compaction on finalization using `--auto-compact-db=false`
* Make it possible to trigger a manual, single-threaded foreground compaction on start-up using `--compact-db`
* Downgrade the pruning log to `DEBUG`, as it's particularly noisy during sync
I would like to ship these changes to affected users ASAP, and will document them further in the Advanced Database section of the book if they prove effective.
## Issue Addressed
A peer might send a lot of requests that comply to the rate limit and the disconnect, this humongous pr makes sure we don't process them if the peer is not connected
This PR adds a number of improvements:
- Downgrade a warning log when we ignore blocks for gossipsub processing
- Revert a a correction to improve logging of peer score changes
- Shift syncing DB reads off the core-executor allowing parallel processing of large sync messages
- Correct the timeout logic of RPC chunk sends, giving more time before timing out RPC outbound messages.
## Issue Addressed
- RPC Errors were being logged twice: first in the peer manager and then again in the router, so leave just the peer manager's one
- The "reduce peer count" warn message gets thrown to the user for every missed chunk, so instead print it when the request times out and also do not include there info that is not relevant to the user
- The processor didn't have the service tag so add it
- Impl `KV` for status message
- Do not downscore peers if we are the ones that timed out
Other small improvements
## Issue Addressed
Resolves#1801
## Proposed Changes
Verify queries to `attestation_data` are for no later than `current_slot + 1`. If they are later than this, return a 400.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#1856
## Proposed Changes
- For clarity, the router's processor now only decides if a peer is compatible and it disconnects it or sends it to sync accordingly. No logic here regarding how useful is the peer.
- Update peer_sync_info's rules
- Add an `IrrelevantPeer` sync status to account for incompatible peers (maybe this should be "IncompatiblePeer" now that I think about it?) this state is update upon receiving an internal goodbye in the peer manager
- Misc code cleanups
- Reduce the need to create `StatusMessage`s (and thus, `Arc` accesses )
- Add missing calls to update the global sync state
The overall effect should be:
- More peers recognized as Behind, and less as Unknown
- Peers identified as incompatible
## Issue Addressed
- Asymmetric pings - Currently with symmetric ping intervals, lighthouse nodes race each other to ping often ending in simultaneous ping connections. This shifts the ping interval to be asymmetric based on inbound/outbound connections
- Correct inbound/outbound peer-db registering - It appears we were accounting inbound as outbound and vice versa in the peerdb, this has been corrected
- Improved logging
There is likely more to come - I'll leave this open as we investigate further testnets
## Issue Addressed
Using `heaptrack` I could see that ~75% of Lighthouse temporary allocations are caused by temporary string allocations here.
## Proposed Changes
Reduces temporary `String` allocations when updating metrics in the `network` crate. The solution isn't perfect since we rebuild our caches with each call, but it's a significant improvement.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Correctly handles peer state transitions on gossipsub changes + refactors handling of peer state transitions into one function used for lighthouse score changes and gossipsub score changes.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
Increases the target peers for a subnet, so that subnet queries are executed until we have at least the minimum required peers for a mesh (`MESH_N_LOW`). We keep the limit of `6` target peers for aggregated subnet discovery queries, therefore the size (and the time needed) for a query doesn't change.
## Issue Addressed
#1606
## Proposed Changes
Uses dynamic gossipsub scoring parameters depending on the number of active validators as specified in https://gist.github.com/blacktemplar/5c1862cb3f0e32a1a7fb0b25e79e6e2c.
## Additional Info
Although the parameters got tested on Medalla, extensive testing using simulations on larger networks is still to be done and we expect that we need to change the parameters, although this might only affect constants within the dynamic parameter framework.
## Issue Addressed
Resolves#1809Resolves#1824Resolves#1818Resolves#1828 (hopefully)
## Proposed Changes
- add `validator_index` to the proposer duties endpoint
- add the ability to query for historical proposer duties
- `StateId` deserialization now fails with a 400 warp rejection
- add the `validator_balances` endpoint
- update the `aggregate_and_proofs` endpoint to accept an array
- updates the attester duties endpoint from a `GET` to a `POST`
- reduces the number of times we query for proposer duties from once per slot per validator to only once per slot
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#1866
## Proposed Changes
* Compact the database on finalization. This removes the deleted states from disk completely. Because it happens in the background migrator, it doesn't block other database operations while it runs. On my Medalla node it took about 1 minute and shrank the database from 90GB to 9GB.
* Fix an inefficiency in the pruning algorithm where it would always use the genesis checkpoint as the `old_finalized_checkpoint` when running for the first time after start-up. This would result in loading lots of states one-at-a-time back to genesis, and storing a lot of block roots in memory. The new code stores the old finalized checkpoint on disk and only uses genesis if no checkpoint is already stored. This makes it both backwards compatible _and_ forwards compatible -- no schema change required!
* Introduce two new `INFO` logs to indicate when pruning has started and completed. Users seem to want to know this information without enabling debug logs!
Updates libp2p to the latest version.
This adds tokio 0.3 support and brings back yamux support.
This also updates some discv5 configuration parameters for leaner discovery queries
## Issue Addressed
NA
## Proposed Changes
Lets the networking behavior ignore messages of peers that are not connected. Furthermore, old peers are not removed from the peerdb based on score anymore but based on the disconnection time.
## Issue Addressed
- Related to #1691
## Proposed Changes
Adds the following API endpoints:
- `GET lighthouse/eth1/syncing`: status about how synced we are with Eth1.
- `GET lighthouse/eth1/block_cache`: all locally cached eth1 blocks.
- `GET lighthouse/eth1/deposit_cache`: all locally cached eth1 deposits.
Additionally:
- Moves some types from the `beacon_node/eth1` to the `common/eth2` crate, so they can be used in the API without duplication.
- Allow `update_deposit_cache` and `update_block_cache` to take an optional head block number to avoid duplicate requests.
## Additional Info
TBC
## Issue Addressed
Fixes head syncing
## Proposed Changes
- Get back to statusing peers after removing chain segments and making the peer manager deal with status according to the Sync status, preventing an old known deadlock
- Also a bug where a chain would get removed if the optimistic batch succeeds being empty
## Additional Info
Tested on Medalla and looking good
## Issue Addressed
NA
## Proposed Changes
As raised by @hermanjunge in a DM, the `http_api` tests have been observed taking 100+ minutes on debug. This PR:
- Moves the `http_api` tests to only run in release.
- Groups some `http_api` tests to reduce test-setup overhead.
## Additional Info
NA
## Issue Addressed
Michael's comment here: https://github.com/sigp/lighthouse/issues/1434#issuecomment-708834079Resolves#1808
## Proposed Changes
- Add query param `id` and `status` to the `validators` endpoint
- Add string serialization and deserialization for `ValidatorStatus`
- Drop `Epoch` from `ValidatorStatus` variants
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
Sync edge case when we get an empty optimistic batch that passes validation and is inside the download buffer. Eventually the chain would reach the batch and treat it as an ugly state.
## Proposed Changes
- Handle the edge case advancing the chain's target + code clarification
- Some largey changes for readability + ergonomics since rust has try ops
- Better handling of bad batch and chain states
## Issue Addressed
NA
## Proposed Changes
Currently a banned peer will remain banned indefinitely as long as update is called on the score struct regularly. This fixes this bug and the score decay starts after `BANNED_BEFORE_DECAY` seconds after banning.
## Issue Addressed
Closes#1504Closes#1505
Replaces #1703Closes#1707
## Proposed Changes
* Update BLST and Milagro to versions compatible with BLSv4 spec
* Update Lighthouse to spec v1.0.0-rc.0, and update EF test vectors
* Use the v1.0.0 constants for `MainnetEthSpec`.
* Rename `InteropEthSpec` -> `V012LegacyEthSpec`
* Change all constants to suit the mainnet `v0.12.3` specification (i.e., Medalla).
* Deprecate the `--spec` flag for the `lighthouse` binary
* This value is now obtained from the `config_name` field of the `YamlConfig`.
* Built in testnet YAML files have been updated.
* Ignore the `--spec` value, if supplied, log a warning that it will be deprecated
* `lcli` still has the spec flag, that's fine because it's dev tooling.
* Remove the `E: EthSpec` from `YamlConfig`
* This means we need to deser the genesis `BeaconState` on-demand, but this is fine.
* Swap the old "minimal", "mainnet" strings over to the new `EthSpecId` enum.
* Always require a `CONFIG_NAME` field in `YamlConfig` (it used to have a default).
## Additional Info
Lots of breaking changes, do not merge! ~~We will likely need a Lighthouse v0.4.0 branch, and possibly a long-term v0.3.0 branch to keep Medalla alive~~.
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#1825
## Proposed Changes
Since we penalize more blocks by range requests that have large steps, it is possible to get requests that will never be processed. We were not informing peers about this requests and also logging CRIT that is no longer relevant. Later we should check if more sophisticated handling for those requests is needed
## Issue Addressed
NA
## Proposed Changes
Fixes a bug which causes the node to reject valid eth1 nodes.
- Fix core bug: failure to apply `YamlConfig` values to `ChainSpec`.
- Add a test to prevent regression in this specific case.
- Fix an invalid log message
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Panic or return error if we overflow `usize` in SSZ decoding/encoding derive macros.
- I claim that the panics can only be triggered by a faulty type definition in lighthouse, they cannot be triggered externally on a validly defined struct.
- Use `Ordering` instead of some `if` statements, as demanded by clippy.
- Remove some old clippy `allow` that seem to no longer be required.
- Add comments to interesting clippy statements that we're going to continue to ignore.
- Create #1713
## Additional Info
NA
## Issue Addressed
- Related to #1691
## Proposed Changes
- Add `DEPOSIT_CHAIN_ID` and `DEPOSIT_NETWORK_ID` to `config.yaml`.
- Pass the `DEPOSIT_NETWORK_ID` to the `eth1::Service`.
- Remove the unused `MAX_EPOCHS_PER_CROSSLINK` from the `altona` and `medalla` configs (see [spec commit](2befe90032 (diff-efb845ac2ebd4aafbc23df40f47ce25699255064e99d36d0406d0a14ca7953ec))).
- Change from compressing the whole testnet directory, to only compressing the genesis state file. This is the only file we need to compress and *not* compressing the others makes them work nicely with git.
- We can modify the boot nodes, configs, etc. without incurring an eternal binary-blob cost on our git history.
- This change is backwards compatible (i.e., non-breaking).
## Additional Info
NA
## Issue Addressed
Further testing revealed another edge case where we attempt to unban a peer that can be in a disconnected start. Although this causes no real issue, it does log an error to the user.
This PR adds a check to prevent this edge case and prevents the error being logged to the user.
This PR prevents a user-facing error.
It prevents optimistically unbanning a peer and instead checks the state of the peer before requesting the peers state to be unbanned.
As @AgeManning mentioned the newest libp2p version had some problems and got downgraded again on lighthouse master. This is an intermediate version that makes no problems and only adds a small change of allowing only one topic per message.
## Description
This downgrades the recent libp2p upgrade.
There were issues with the RPC which prevented syncing of the chain and this upgrade needs to be further investigated.
## Overview
This updates lighthouse to discovery v5.1
Note: This makes lighthouse's discovery not compatible with any previous version. Lighthouse cannot discover peers or send/receive ENR's from any previous version. This is a breaking change.
This resolves#1605
## Description
This increases the logging of the underlying UPnP tasks to inform the user of UPnP error/success.
This also decreases the batch syncing size to two epochs per batch.
## Description
Updates to the latest libp2p and includes gossipsub updates.
Of particular note is the limitation of a single topic per gossipsub message.
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Closes#800Closes#1713
## Proposed Changes
Implement the temporary state storage algorithm described in #800. Specifically:
* Add `DBColumn::BeaconStateTemporary`, for storing 0-length temporary marker values.
* Store intermediate states immediately as they are created, marked temporary. Delete the temporary flag if the block is processed successfully.
* Add a garbage collection process to delete leftover temporary states on start-up.
* Bump the database schema version to 2 so that a DB with temporary states can't accidentally be used with older versions of the software. The auto-migration is a no-op, but puts in place some infra that we can use for future migrations (e.g. #1784)
## Additional Info
There are two known race conditions, one potentially causing permanent faults (hopefully rare), and the other insignificant.
### Race 1: Permanent state marked temporary
EDIT: this has been fixed by the addition of a lock around the relevant critical section
There are 2 threads that are trying to store 2 different blocks that share some intermediate states (e.g. they both skip some slots from the current head). Consider this sequence of events:
1. Thread 1 checks if state `s` already exists, and seeing that it doesn't, prepares an atomic commit of `(s, s_temporary_flag)`.
2. Thread 2 does the same, but also gets as far as committing the state txn, finishing the processing of its block, and _deleting_ the temporary flag.
3. Thread 1 is (finally) scheduled again, and marks `s` as temporary with its transaction.
4.
a) The process is killed, or thread 1's block fails verification and the temp flag is not deleted. This is a permanent failure! Any attempt to load state `s` will fail... hope it isn't on the main chain! Alternatively (4b) happens...
b) Thread 1 finishes, and re-deletes the temporary flag. In this case the failure is transient, state `s` will disappear temporarily, but will come back once thread 1 finishes running.
I _hope_ that steps 1-3 only happen very rarely, and 4a even more rarely. It's hard to know
This once again begs the question of why we're using LevelDB (#483), when it clearly doesn't care about atomicity! A ham-fisted fix would be to wrap the hot and cold DBs in locks, which would bring us closer to how other DBs handle read-write transactions. E.g. [LMDB only allows one R/W transaction at a time](https://docs.rs/lmdb/0.8.0/lmdb/struct.Environment.html#method.begin_rw_txn).
### Race 2: Temporary state returned from `get_state`
I don't think this race really matters, but in `load_hot_state`, if another thread stores a state between when we call `load_state_temporary_flag` and when we call `load_hot_state_summary`, then we could end up returning that state even though it's only a temporary state. I can't think of any case where this would be relevant, and I suspect if it did come up, it would be safe/recoverable (having data is safer than _not_ having data).
This could be fixed by using a LevelDB read snapshot, but that would require substantial changes to how we read all our values, so I don't think it's worth it right now.
## Issue Addressed
Potentially resolves#1647 and sync stalls.
## Proposed Changes
The handling of the state of banned peers was inadequate for the complex peerdb data structure. We store a limited number of disconnected and banned peers in the db. We were not tracking intermediate "disconnecting" states and the in some circumstances we were updating the peer state without informing the peerdb. This lead to a number of inconsistencies in the peer state.
Further, the peer manager could ban a peer changing a peer's state from being connected to banned. In this circumstance, if the peer then disconnected, we didn't inform the application layer, which lead to applications like sync not being informed of a peers disconnection. This could lead to sync stalling and having to require a lighthouse restart.
Improved handling for peer states and interactions with the peerdb is made in this PR.
## Issue Addressed
NA
## Proposed Changes
Adds a `lighthouse/beacon/states/:state_id/ssz` endpoint to allow us to pull the genesis state from the API.
## Additional Info
NA
## Issue Addressed
Closes#1769Closes#1708
## Proposed Changes
Tweaks the op pool pruning so that the attestation pool is pruned against the wall-clock epoch instead of the finalized state's epoch. This should reduce the unbounded growth that we've seen during periods without finality.
Also fixes up the voluntary exit pruning as raised in #1708.
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
`node` endpoints in #1434
## Proposed Changes
Implement these:
```
/eth/v1/node/health
/eth/v1/node/peers/{peer_id}
/eth/v1/node/peers
```
- Add an `Option<Enr>` to `PeerInfo`
- Finish implementation of `/eth/v1/node/identity`
## Additional Info
- should update the `peers` endpoints when #1764 is resolved
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#1548
## Proposed Changes
Optimizes attester slashing choice by choosing the ones that cover the most amount of validators slashed, with the highest effective balances
## Additional Info
Initial pass, need to write a test for it
check for advanced peers and the state of the chain wrt the clock slot to decide if a chain is or not synced /transitioning to a head sync. Also a fix that prevented getting the right state while syncing heads
## Issue Addressed
Resolves#1776
## Proposed Changes
The beacon chain builder was using the canonical head's state root for the `genesis_state_root` field.
## Additional Info
## Issue Addressed
Resolves#1792
## Proposed Changes
Use `chain.best_slot()` instead of the sync state's target slot in the `not_while_syncing_filter`
## Additional Info
N/A
## Issue Addressed
#1614 and a couple of sync-stalling problems, the most important is a cyclic dependency between the sync manager and the peer manager
## Issue Addressed
Closes#1557
## Proposed Changes
Modify the pruning algorithm so that it mutates the head-tracker _before_ committing the database transaction to disk, and _only if_ all the heads to be removed are still present in the head-tracker (i.e. no concurrent mutations).
In the process of writing and testing this I also had to make a few other changes:
* Use internal mutability for all `BeaconChainHarness` functions (namely the RNG and the graffiti), in order to enable parallel calls (see testing section below).
* Disable logging in harness tests unless the `test_logger` feature is turned on
And chose to make some clean-ups:
* Delete the `NullMigrator`
* Remove type-based configuration for the migrator in favour of runtime config (simpler, less duplicated code)
* Use the non-blocking migrator unless the blocking migrator is required. In the store tests we need the blocking migrator because some tests make asserts about the state of the DB after the migration has run.
* Rename `validators_keypairs` -> `validator_keypairs` in the `BeaconChainHarness`
## Testing
To confirm that the fix worked, I wrote a test using [Hiatus](https://crates.io/crates/hiatus), which can be found here:
https://github.com/michaelsproul/lighthouse/tree/hiatus-issue-1557
That test can't be merged because it inserts random breakpoints everywhere, but if you check out that branch you can run the test with:
```
$ cd beacon_node/beacon_chain
$ cargo test --release --test parallel_tests --features test_logger
```
It should pass, and the log output should show:
```
WARN Pruning deferred because of a concurrent mutation, message: this is expected only very rarely!
```
## Additional Info
This is a backwards-compatible change with no impact on consensus.
## Issue Addressed
NA
## Proposed Changes
Adds a direction field to `PeerConnectionStatus` that can be accessed by calling `is_outgoing` which will return `true` iff the peer is connected and the first connection was an outgoing one.
## Issue Addressed
#1729#1730
Which issue # does this PR address?
## Proposed Changes
1. Fixes a bug in the simulator where nodes can't find each other due to 0 udp ports in their enr.
2. Fixes bugs in attestation service where we are unsubscribing from a subnet prematurely.
More testing is needed for attestation service fixes.
## Proposed Changes
Adds a gossipsub topic filter that only allows subscribing and incoming subscriptions from valid ETH2 topics.
## Additional Info
Currently the preparation of the valid topic hashes uses only the current fork id but in the future it must also use all possible future fork ids for planned forks. This has to get added when hard coded forks get implemented.
DO NOT MERGE: We first need to merge the libp2p changes (see https://github.com/sigp/rust-libp2p/pull/70) so that we can refer from here to a commit hash inside the lighthouse branch.
## Proposed Changes
Implement the new message id function (see https://github.com/ethereum/eth2.0-specs/pull/2089) using an additional fast message id function for better performance + caching decompressed data.
## Issue Addressed
N/A
## Proposed Changes
This PR limits the length of the stream received by the snappy decoder to be the maximum allowed size for the received rpc message type. Also adds further checks to ensure that the length specified in the rpc [encoding-dependent header](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/p2p-interface.md#encoding-strategies) is within the bounds for the rpc message type being decoded.
Squashed commit of the following:
commit f99373cbaec9adb2bdbae3f7e903284327962083
Author: Age Manning <Age@AgeManning.com>
Date: Mon Oct 5 18:44:09 2020 +1100
Clean up obsolute TODOs
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
* Initial rebase
* Remove old code
* Correct release tests
* Rebase commit
* Remove eth2-testnet dep on eth2libp2p
* Remove crates lost in rebase
* Remove unused dep
## Issue Addressed
Downgrade inconsistent chain segment states from `panic` to `crit`. I don't love this solution but since range can always bounce back from any of those, we don't panic.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
chain state inconsistencies
## Proposed Changes
- a batch can be fake-failed by Range if it needs to move a peer to another chain. The peer will still send blocks/ errors / produce timeouts for those requests, so check when we get a response from the RPC that the request id matches, instead of only the peer, since a re-request can be directed to the same peer.
- if an optimistic batch succeeds, store the attempt to avoid trying it again when quickly switching chains. Also, use it only if ahead of our current target, instead of the segment's start epoch
## Issue Addressed
NA
## Proposed Changes
Uses a `Drop` implementation to help ensure that `BeaconProcessor` workers are freed. This will help prevent against regression, if someone happens to add an early return and it will also help in the case of a panic.
## Additional Info
NA
## Issue Addressed
Downgrade inconsistent chain segment states from `panic` to `crit`. I don't love this solution but since range can always bounce back from any of those, we don't panic.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
chain state inconsistencies
## Proposed Changes
- a batch can be fake-failed by Range if it needs to move a peer to another chain. The peer will still send blocks/ errors / produce timeouts for those requests, so check when we get a response from the RPC that the request id matches, instead of only the peer, since a re-request can be directed to the same peer.
- if an optimistic batch succeeds, store the attempt to avoid trying it again when quickly switching chains. Also, use it only if ahead of our current target, instead of the segment's start epoch
## Issue Addressed
NA
## Proposed Changes
Uses a `Drop` implementation to help ensure that `BeaconProcessor` workers are freed. This will help prevent against regression, if someone happens to add an early return and it will also help in the case of a panic.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Addresses an interesting DoS vector raised by @protolambda by verifying that the head and target are consistent when processing aggregate attestations. This check prevents us from loading very old target blocks and doing lots of work to skip them to the current slot.
## Additional Info
NA
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
This commit was edited by Paul H when rebasing from master to
v0.3.0-staging.
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Addresses an interesting DoS vector raised by @protolambda by verifying that the head and target are consistent when processing aggregate attestations. This check prevents us from loading very old target blocks and doing lots of work to skip them to the current slot.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
## Issue Addressed
#927
## Proposed Changes
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
## Additional Info
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
## Proposed Changes
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
## Additional Info
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#673
## Proposed Changes
Store a schema version in the database so that future releases can check they're running against a compatible database version. This would also enable automatic migration on breaking database changes, but that's left as future work.
The database config is also stored in the database so that the `slots_per_restore_point` value can be checked for consistency, which closes#673
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1313
## Proposed Changes
Changes the way we start the validator client and beacon node to ensure that we cleanly drop the validator keystores (which therefore ensures we cleanup their lockfiles).
Previously we were holding the validator keystores in a tokio task that was being forcefully killed (i.e., without `Drop`). Now, we hold them in a task that can gracefully handle a shutdown.
Also, switches the `--strict-lockfiles` flag to `--delete-lockfiles`. This means two things:
1. We are now strict on lockfiles by default (before we weren't).
1. There's a simple way for people delete the lockfiles if they experience a crash.
## Additional Info
I've only given the option to ignore *and* delete lockfiles, not just ignore them. I can't see a strong need for ignore-only but could easily add it, if the need arises.
I've flagged this as `api-breaking` since users that have lockfiles lingering around will be required to supply `--delete-lockfiles` next time they run.
## Issue Addressed
Closes#1680
## Proposed Changes
This PR fixes a race condition in beacon node start-up whereby the pubkey cache could be created by the beacon chain builder before the `PersistedBeaconChain` was stored to disk. When the node restarted, it would find the persisted chain missing, and attempt to start from scratch, creating a new pubkey cache in the process. This call to `ValidatorPubkeyCache::new` would fail if the file already existed (which it did). I changed the behaviour so that pubkey cache initialization now doesn't care whether there's a file already in existence (it's only a cache after all). Instead it will truncate and recreate the file in the race scenario described.
## Issue Addressed
NA
## Proposed Changes
There are four new conditions introduced in v0.12.3:
1. _[REJECT]_ The attestation's epoch matches its target -- i.e. `attestation.data.target.epoch ==
compute_epoch_at_slot(attestation.data.slot)`
1. _[REJECT]_ The attestation's target block is an ancestor of the block named in the LMD vote -- i.e.
`get_ancestor(store, attestation.data.beacon_block_root, compute_start_slot_at_epoch(attestation.data.target.epoch)) == attestation.data.target.root`
1. _[REJECT]_ The committee index is within the expected range -- i.e. `data.index < get_committee_count_per_slot(state, data.target.epoch)`.
1. _[REJECT]_ The number of aggregation bits matches the committee size -- i.e.
`len(attestation.aggregation_bits) == len(get_beacon_committee(state, data.slot, data.index))`.
This PR implements new logic to suit (1) and (2). Tests are added for (3) and (4), although they were already implicitly enforced.
## Additional Info
- There's a bit of edge-case with target root verification that I raised here: https://github.com/ethereum/eth2.0-specs/pull/2001#issuecomment-699246659
- I've had to add an `--ignore` to `cargo audit` to get CI to pass. See https://github.com/sigp/lighthouse/issues/1669
## Issue Addressed
#629
## Proposed Changes
This removes banned peers from the DHT and informs discovery to block the node_id and the known source IP's associated with this node. It has the capabilities of un banning this peer after a period of time.
This also corrects the logic about banning specific IP addresses. We now use seen_ip addresses from libp2p rather than those sent to us via identify (which also include local addresses).
## Issue Addressed
In principle.. closes#1551 but in general are improvements for performance, maintainability and readability. The logic for the optimistic sync in actually simple
## Proposed Changes
There are miscellaneous things here:
- Remove unnecessary `BatchProcessResult::Partial` to simplify the batch validation logic
- Make batches a state machine. This is done to ensure batch state transitions respect our logic (this was previously done by moving batches between `Vec`s) and to ease the cognitive load of the `SyncingChain` struct
- Move most batch-related logic to the batch
- Remove `PendingBatches` in favor of a map of peers to their batches. This is to avoid duplicating peers inside the chain (peer_pool and pending_batches)
- Add `must_use` decoration to the `ProcessingResult` so that chains that request to be removed are handled accordingly. This also means that chains are now removed in more places than before to account for unhandled cases
- Store batches in a sorted map (`BTreeMap`) access is not O(1) but since the number of _active_ batches is bounded this should be fast, and saves performing hashing ops. Batches are indexed by the epoch they start. Sorted, to easily handle chain advancements (range logic)
- Produce the chain Id from the identifying fields: target root and target slot. This, to guarantee there can't be duplicated chains and be able to consistently search chains by either Id or checkpoint
- Fix chain_id not being present in all chain loggers
- Handle mega-edge case where the processor's work queue is full and the batch can't be sent. In this case the chain would lose the blocks, remain in a "syncing" state and waiting for a result that won't arrive, effectively stalling sync.
- When a batch imports blocks or the chain starts syncing with a local finalized epoch greater that the chain's start epoch, the chain is advanced instead of reset. This is to avoid losing download progress and validate batches faster. This also means that the old `start_epoch` now means "current first unvalidated batch", so it represents more accurately the progress of the chain.
- Batch status peers from the same chain to reduce Arc access.
- Handle a couple of cases where the retry counters for a batch were not updated/checked are now handled via the batch state machine. Basically now if we forget to do it, we will know.
- Do not send back the blocks from the processor to the batch. Instead register the attempt before sending the blocks (does not count as failed)
- When re-requesting a batch, try to avoid not only the last failed peer, but all previous failed peers.
- Optimize requesting batches ahead in the buffer by shuffling idle peers just once (this is just addressing a couple of old TODOs in the code)
- In chain_collection, store chains by their id in a map
- Include a mapping from request_ids to (chain, batch) that requested the batch to avoid the double O(n) search on block responses
- Other stuff:
- impl `slog::KV` for batches
- impl `slog::KV` for syncing chains
- PSA: when logging, we can use `%thing` if `thing` implements `Display`. Same for `?` and `Debug`
### Optimistic syncing:
Try first the batch that contains the current head, if the batch imports any block, advance the chain. If not, if this optimistic batch is inside the current processing window leave it there for future use, if not drop it. The tolerance for this block is the same for downloading, but just once for processing
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
N/A
## Proposed Changes
Prevent subscribing to core gossipsub topics until after we have achieved a full sync. This prevents us censoring gossipsub channels, getting penalised in gossipsub 1.1 scoring and saves us computation time in attempting to validate gossipsub messages which we will be unable to do with a non-sync'd chain.
## Issue Addressed
Closes#1472
## Proposed Changes
Add `--staking` ~~and`staking-with-eth1-endpoint`~~ flag to improve UX for stakers.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1080
## Proposed Changes
- Call `update_pubkey_cache` only in the `build_all_caches` method and `get_validator_index` method.
## Additional Info
This does reduce the number of places the cache is updated, making it simpler. But the `get_validator_index` method is used a couple times when we are iterating through the entire validator registry (or set of active validators). Before, we would only call `update_pubkey_cache` once before iterating through all validators. So I'm not _totally_ sure this change is worth it.
## Issue Addressed
- Resolves#1616
## Proposed Changes
If we look at the function which persists fork choice and the canonical head to disk:
1db8daae0c/beacon_node/beacon_chain/src/beacon_chain.rs (L234-L280)
There is a race-condition which might cause the canonical head and fork choice values to be out-of-sync.
I believe this is the cause of #1616. I managed to recreate the issue and produce a database that was unable to sync under the `master` branch but able to sync with this branch.
These new changes solve the issue by ignoring the persisted `canonical_head_block_root` value and instead getting fork choice to generate it. This ensures that the canonical head is in-sync with fork choice.
## Additional Info
This is hotfix method that leaves some crusty code hanging around. Once this PR is merged (to satisfy the v0.2.x users) we should later update and merge #1638 so we can have a clean fix for the v0.3.x versions.
## Issue Addressed
N/A
## Proposed Changes
Shifts the local `metadata` to `network_globals` making it accessible to the HTTP API and other areas of lighthouse.
## Additional Info
N/A
## Issue Addressed
N/A
## Proposed Changes
Adds the following check from the spec
> A reader SHOULD NOT read more than max_encoded_len(n) bytes after reading the SSZ length-prefix n from the header.
## Issue Addressed
- Resolves#1616
## Proposed Changes
Fixes a bug where we are unable to read the finalized block from fork choice.
## Detail
I had made an assumption that the finalized block always has a parent root of `None`:
e5fc6bab48/consensus/fork_choice/src/fork_choice.rs (L749-L752)
This was a faulty assumption, we don't set parent *roots* to `None`. Instead we *sometimes* set parent *indices* to `None`, depending if this pruning condition is satisfied:
e5fc6bab48/consensus/proto_array/src/proto_array.rs (L229-L232)
The bug manifested itself like this:
1. We attempt to get the finalized block from fork choice
1. We try to check that the block is descendant of the finalized block (note: they're the same block).
1. We expect the parent root to be `None`, but it's actually the parent root of the finalized root.
1. We therefore end up checking if the parent of the finalized root is a descendant of itself. (note: it's an *ancestor* not a *descendant*).
1. We therefore declare that the finalized block is not a descendant of (or eq to) the finalized block. Bad.
## Additional Info
In reflection, I made a poor assumption in the quest to obtain a probably negligible performance gain. The performance gain wasn't worth the risk and we got burnt.
## Issue Addressed
N/A
## Proposed Changes
This will consider all gossipsub messages that have either the `from`, `seqno` or `signature` field as invalid.
## Additional Info
We should not merge this until all other clients have been sending empty fields for a while.
See https://github.com/ethereum/eth2.0-specs/issues/1981 for reference
## Issue Addressed
https://github.com/ethereum/eth2.0-specs/pull/2044
## Proposed Changes
Shifts the gossipsub message id to use the first 8 bytes of the SHA256 hash of the gossipsub message data field.
## Additional Info
We should merge this in once the spec has been decided on. It will cause issues with gossipsub scoring and gossipsub propagation rates (as we won't receive IWANT) messages from clients that also haven't made this update.
## Issue Addressed
#1590
## Proposed Changes
This is a temporary workaround that prevents finalized chain sync from swapping chains. I'm merging this in now until the full solution is ready.
## Issue Addressed
Malicious users could request very large block ranges, more than we expect. Although technically legal, we are now quadraticaly weighting large step sizes in the filter. Therefore users may request large skips, but not a large number of blocks, to prevent requests forcing us to do long chain lookups.
## Proposed Changes
Weight the step parameter in the RPC filter and prevent any overflows that effect us in the step parameter.
## Additional Info
## Issue Addressed
Closes#1365
## Proposed Changes
Dial peers in the `cached_enrs` who aren't connected, aren't banned and satisfy the subnet predicate before making a subnet discovery query.
## Issue Addressed
Partly addresses #1547
## Proposed Changes
This fix addresses the missing attestations at slot 0 of an epoch (also sometimes slot 1 when slot 0 was skipped).
There are 2 cases:
1. BN receives the block for the attestation slot after 4 seconds (1/3rd of the slot).
2. No block is proposed for this slot.
In both cases, when we produce the attestation, we pass the head state to the
`produce_unaggregated_attestation_for_block` function here
9833eca024/beacon_node/beacon_chain/src/beacon_chain.rs (L845-L850)
Since we don't advance the state in this function, we set `attestation.data.source = state.current_justified_checkpoint` which is atleast 2 epochs lower than current_epoch(wall clock epoch).
This attestation is invalid and cannot be included in a block because of this assert from the spec:
```python
if data.target.epoch == get_current_epoch(state):
assert data.source == state.current_justified_checkpoint
state.current_epoch_attestations.append(pending_attestation)
```
https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/beacon-chain.md#attestations
This PR changes the `produce_unaggregated_attestation_for_block` function to ensure that it advances the state before producing the attestation at the new epoch.
Running this on my node, have missed 0 attestations across all 8 of my validators in a 100 epoch period 🎉
To compare, I was missing ~14 attestations across all 8 validators in the same 100 epoch period before the fix.
Will report missed attestations if any after running for another 100 epochs tomorrow.
## Issue Addressed
#1421
## Proposed Changes
Bounding the error_message that can be returned for RPC domain errors
Co-authored-by: Age Manning <Age@AgeManning.com>
Converts the graffiti binary data to string before printing to logs.
## Issue Addressed
#1566
## Proposed Changes
Rather than converting graffiti to a vector the binary data less the last character is passed to String::from_utf_lossy(). This then allows us to call the to_string() function directly to give us the string
## Additional Info
Rust skills are fairly weak
## Issue Addressed
N/A
## Proposed Changes
Adds extended metrics to get a better idea of what is happening at the gossipsub layer of lighthouse. This provides information about mesh statistics per topics, subscriptions and peer scores.
## Additional Info
## Issue Addressed
Fixes#1509
## Proposed Changes
Exit the beacon node if the eth1 endpoint points to an invalid eth1 network. Check the network id before every eth1 cache update and display an error log if the network id has changed to an invalid one.
## Issue Addressed
#1172
## Proposed Changes
* updates the libp2p dependency
* small adaptions based on changes in libp2p
* report not just valid messages but also invalid and distinguish between `IGNORE`d messages and `REJECT`ed messages
Co-authored-by: Age Manning <Age@AgeManning.com>
The PR:
* Adds the ability to generate a crucial test scenario that isn't possible with `BeaconChainHarness` (i.e. two blocks occupying the same slot; previously forks necessitated skipping slots):
![image](https://user-images.githubusercontent.com/165678/88195404-4bce3580-cc40-11ea-8c08-b48d2e1d5959.png)
* New testing API: Instead of repeatedly calling add_block(), you generate a sorted `Vec<Slot>` and leave it up to the framework to generate blocks at those slots.
* Jumping backwards to an earlier epoch is a hard error, so that tests necessarily generate blocks in a epoch-by-epoch manner.
* Configures the test logger so that output is printed on the console in case a test fails. The logger also plays well with `--nocapture`, contrary to the existing testing framework
* Rewrites existing fork pruning tests to use the new API
* Adds a tests that triggers finalization at a non epoch boundary slot
* Renamed `BeaconChainYoke` to `BeaconChainTestingRig` because the former has been too confusing
* Fixed multiple tests (e.g. `block_production_different_shuffling_long`, `delete_blocks_and_states`, `shuffling_compatible_simple_fork`) that relied on a weird (and accidental) feature of the old `BeaconChainHarness` that attestations aren't produced for epochs earlier than the current one, thus masking potential bugs in test cases.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#1488
## Proposed Changes
* Prevent the pruning algorithm from over-eagerly deleting states at skipped slots when they are shared with the canonical chain.
* Add `debug` logging to the pruning algorithm so we have so better chance of debugging future issues from logs.
* Modify the handling of the "finalized state" in the beacon chain, so that it's always the state at the first slot of the finalized epoch (previously it was the state at the finalized block). This gives database pruning a clearer and cleaner view of things, and will marginally impact the pruning of the op pool, observed proposers, etc (in ways that are safe as far as I can tell).
* Remove duplicated `RevertedFinalizedEpoch` check from `after_finalization`
* Delete useless and unused `max_finality_distance`
* Add tests that exercise pruning with shared states at skip slots
* Delete unnecessary `block_strategy` argument from `add_blocks` and friends in the test harness (will likely conflict with #1380 slightly, sorry @adaszko -- but we can fix that)
* Bonus: add a `BeaconChain::with_head` method. I didn't end up needing it, but it turned out quite nice, so I figured we could keep it?
## Additional Info
Any users who have experienced pruning errors on Medalla will need to resync after upgrading to a release including this change. This should end unbounded `chain_db` growth! 🎉
## Issue Addressed
NA
## Proposed Changes
Shift practically all HTTP endpoint handlers to the blocking executor (some very light tasks are left on the core executor).
## Additional Info
This PR covers the `rest_api` which will soon be refactored to suit the standard API. As such, I've cut a few corners and left some existing issues open in this patch. What I have done here should leave the API in state that is not necessary *exactly* the same, but good enough for us to run validators with. Specifically, the number of blocking workers that can be spawned is unbounded and I have not implemented a queue; this will need to be fixed when we implement the standard API.
## Issue Addressed
#1378
## Proposed Changes
Boot node reuses code from beacon_node to initialize network config. This also enables using the network directory to store/load the enr and the private key.
## Additional Info
Note that before this PR the port cli arguments were off (the argument was named `enr-port` but used as `boot-node-enr-port`).
Therefore as port always the cli port argument was used (for both enr and listening). Now the enr-port argument can be used to overwrite the listening port as the public port others should connect to.
Last but not least note, that this restructuring reuses `ethlibp2p::NetworkConfig` that has many more options than the ones used in the boot node. For example the network config has an own `discv5_config` field that gets never used in the boot node and instead another `Discv5Config` gets created later in the boot node process.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
#1283
## Proposed Changes
All peers with the same IP will be considered banned as long as there are more than 5 (constant) peers with this IP that have a score below the ban threshold. As soon as some of those 5 peers get unbanned (through decay) and if there are then less than 5 peers with a score below the threshold the IP will be considered not banned anymore.
## Issue Addressed
N/A
## Proposed Changes
Refactor attestation service to send out requests to find peers for subnets as soon as we get attestation duties.
Earlier, we had much more involved logic to send the discovery requests to the discovery service only 6 slots before the attestation slot. Now that discovery is much smarter with grouped queries, the complexity in attestation service can be reduced considerably.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
#1494
## Proposed Changes
- Give the TaskExecutor the sender side of a channel that a task can clone to request shutting down
- The receiver side of this channel is in environment and now we block until ctrl+c or an internal shutdown signal is received
- The swarm now informs when it has reached 0 listeners
- The network receives this message and requests the shutdown
## Issue Addressed
NA
## Proposed Changes
- Refactors the `BeaconProcessor` to remove some excessive nesting and file bloat
- Sorry about the noise from this, it's all contained in 4d3f8c5 though.
- Adds exits, proposer slashings, attester slashings to the `BeaconProcessor` so we don't get overwhelmed with large amounts of slashings (which happened a few hours ago).
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Sets the default max skips to 700 so that it can cover the 693 slot skip from `80894 - 80201`.
## Additional Info
NA
## Description
This PR improves some logging for the end-user.
It downgrades some warning logs and removes the slots per second sync speed if we are syncing and the speed is 0. This is likely because we are syncing from a finalised checkpoint and the head doesn't change.
## Issue Addressed
NA
## Proposed Changes
- Fixes a mistake I made in #1530 which resulted us in *not* rejecting attestations that we intended to reject.
- Adds skip-slot checks for blocks earlier in import process, so it rejects gossip and RPC blocks.
## Additional Info
NA
## Description
There can be many head chains queued up to complete. Currently we try and process all of these to completion before we consider the node synced.
In a chaotic network, there can be many of these and processing them to completion can be very expensive and slow. This PR removes any non-syncing head chains from the queue, and re-status's the peers. If, after we have synced to head on one chain, there is still a valid head chain to download, it will be re-established once the status has been returned.
This should assist with getting nodes to sync on medalla faster.
## Overview
There are forked chains which get referenced by blocks and attestations on a network. Typically if these chains are very long, we stop looking up the chain and downvote the peer. In extreme circumstances, many peers are on many chains, the chains can be very deep and become time consuming performing lookups.
This PR adds a cache to known failed chain lookups. This prevents us from starting a parent-lookup (or stopping one half way through) if we have attempted the chain lookup in the past.
## Description
Currently lighthouse load-balances across peers a single finalized chain. The chain is selected via the most peers. Once synced to the latest finalized epoch Lighthouse creates chains amongst its peers and syncs them all in parallel amongst each peer (grouped by their current head block).
This is typically fast and relatively efficient under normal operations. However if the chain has not finalized in a long time, the head chains can grow quite long. Peer's head chains will update every slot as new blocks are added to the head. Syncing all head chains in parallel is a bottleneck and highly inefficient in block duplication leads to RPC timeouts when attempting to handle all new heads chains at once.
This PR limits the parallelism of head syncing chains to 2. We now sync at most two head chains at a time. This allows for the possiblity of sync progressing alongside a peer being slow and holding up one chain via RPC timeouts.
The changes are somewhat simple but should solve two issues:
- When quickly changing between chains once and a second time back again, batchIds would collide and cause havoc.
- If we got an out of range response from a peer, sync would remain in syncing but without advancing
Changes:
- remove the batch id. Identify each batch (inside a chain) by its starting epoch. Target epochs for downloading and processing now advance by EPOCHS_PER_BATCH
- for the same reason, move the "to_be_downloaded_id" to be an epoch
- remove a sneaky line that dropped an out of range batch without downloading it
- bonus: put the chain_id in the log given to the chain. This is why explicitly logging the chain_id is removed
## Proposed Changes
To mitigate the impact of minority forks on RAM and disk usage, this change rejects blocks whose parent lies more than 320 slots (10 epochs, ~1 hour) in the past. The behaviour is configurable via `lighthouse bn --max-skip-slots N`, and can be turned off entirely using `--max-skip-slots none`.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Moves beacon block processing over to the newly-added `GossipProcessor`. This moves the task off the core executor onto the blocking one.
## Additional Info
- With this PR, gossip blocks are being ignored during sync.
## Issue Addressed
NA
## Proposed Changes
- Adds a new function to allow getting a state with a bad state root history for attestation verification. This reduces unnecessary tree hashing during attestation processing, which accounted for 23% of memory allocations (by bytes) in a recent `heaptrack` observation.
- Don't clone caches on intermediate epoch-boundary states during block processing.
- Reject blocks that are known to fork choice earlier during gossip processing, instead of waiting until after state has been loaded (this only happens in edge-case).
- Avoid multiple re-allocations by creating a "forced" exact size iterator.
## Additional Info
NA
## Issue Addressed
There is currently an issue with yamux when connecting to prysm peers. The source of the issue is currently unknown.
This PR removes yamux support to force mplex negotation. We can add back yamux support once we have isolated and corrected the issue.
## Issue Addressed
Resolves#1489
## Proposed Changes
- Change starting metadata seq num to 0 according to the [spec](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/p2p-interface.md#metadata).
- Remove metadata field from `NetworkGlobals`
- Persist metadata to disk on every update
- Load metadata seq number from disk on restart
- Persist enr to disk on update to ensure enr sequence number increments are persisted as well.
## Additional info
Since we modified starting metadata seq num to 0 from 1, we might still see `Invalid Sequence number provided` like in #1489 from prysm nodes if they have our metadata cached.
## Issue Addressed
#1384
Only catch, as currently implemented, when dialing the multiaddr nodes, there is no way to ask the peer manager if they are already connected or dialing
## Discovery v5 update
In this update we remove the openssl dependency in favour of rust-crypto.
The update also removes a series of unnecessary async functions which may improve some of the issues we have been experiencing.
## Issue Addressed
- Resolves#1451
## Proposed Changes
- Restricts the `contains_block` and `contains_block` so they only indicate a block is present if it descends from the finalized root. This helps to ensure that fork choice never points to a block that has been pruned from the database.
- Resolves#1451
- Before importing a block, double-check that its parent is known and a descendant of the finalized root.
- Split a big, monolithic block verification test into smaller tests.
## Additional Notes
I suspect there would be a craftier way to do the `is_descendant_of_finalized` check, but we're a bit tight on time now and we can optimize later if it starts showing in benches.
## TODO
- [x] Tests
## Issue Addressed
N/A
## Proposed Changes
Introduces the `GossipProcessor`, a multi-threaded (multi-tasked?), non-blocking processor for some messages from the network which require verification and import into the `BeaconChain`.
Initial testing indicates that this massively improves system stability by (a) moving block tasks from the normal executor (b) spreading out attestation load.
## Additional Info
TBC
These started to appear when I `^C` `curl -N http://localhost:5052/beacon/fork/stream`: `Aug 12 13:00:01.539 ERRO Couldn't stream piece hyper::Error(ChannelClosed), service: http`
Something must have changed in hyper since SSE has been implemented because I'm sure I haven't seen those errors before.
This PR properly detects a closed SSE stream and cleans up.
## Issue Addressed
NA
## Proposed Changes
Adds support for using the [`cross`](https://github.com/rust-embedded/cross) project to produce cross-compiled binaries using Docker images.
Provides quite clean and simple cross-compiles cause all the complexity is hidden in Dockerfiles. It does require you to be in the `docker` group though.
## Details
- Adds shortcut commands to `Makefile`
- Ensures `reqwest` and `discv5` use vendored openssl libs (i.e., static not shared).
- Switches to a [commit](284f705964) of blst that has a renamed C function to avoid a collision with openssl (upstream issue: https://github.com/supranational/blst/issues/21).
- Updates `ring` to the latest satisfiable version, since an earlier version was causing issues with `cross`.
- Off-topic, but adds extra message about Windows support as suggested by Discord user.
## Additional Info
- ~~Blocked on #1495~~
- There are no tests in CI for this yet for a few reasons:
- I'm hesitant to add more long-running tasks.
- Short-term bitrot should be avoided since we'll use it each release.
- In the long term I think it would be good to automate binary creation on a release.
- I observed the binaries increase in size from 50mb to 52mb after these changes.
limit simultaneous outgoing connections attempts to a reasonable top as an extra layer of protection
also shift the keep alive logic of the rpc handler to avoid needing to update it by hand. I think In rare cases this could make shutting down a connection a bit faster.
## Issue Addressed
#1419
## Proposed Changes
Creates a `--graffiti` cli flag in the validator client. If the flag is set, it overrides graffiti in the beacon node.
## Additional Info
## Issue Addressed
#1483
## Proposed Changes
Upgrades the log to a critical if a listener fails. We are able to listen on many interfaces so a single instance is not critical. We should however gracefully shutdown the client if we have no listeners, although the client can still function solely on outgoing connections.
For now a critical is raised and I leave #1494 for more sophisticated handling of this.
This also updates discv5 to handle errors of binding to a UDP socket such that lighthouse is now able to handle them.
## Issue Addressed
Some nodes not following head, high CPU usage and HTTP API delays
## Proposed Changes
Patches gossipsub. Gossipsub was using an `lru_time_cache` to check for duplicates. This contained an `O(N)` lookup for every gossipsub message to update the time cache. This was causing high cpu usage and blocking network threads.
This PR introduces a custom cache without `O(N)` inserts.
This also adds built in safety mechanisms to prevent gossipsub from excessively retrying connections upon failure. A maximum limit is set after which we disconnect from the node from too many failed substream connections.
## Issue Addressed
Peers that connected after the peer limit may remain connected in some circumstances.
This ensures peers not in the peer manager's list get disconnected. Further logging is also added to track this behaviour.
## Issue Addressed
NA
## Proposed Changes
- When producing a block, go and ensure every attestation in the naive aggregation pool is included in the operation pool. This should help us increase the number of useful attestations in a block.
- Lift the `RwLock`s inside `NaiveAggregationPool` up into a single high-level lock. There were race conditions in the existing setup and it was hard to reason about.
## Additional Info
NA
## Issue Addressed
#1028
A bit late, but I think if `BlockError` had a kind (the current `BlockError` minus everything on the variants that comes directly from the block) and the original block, more clones could be removed
## Issue Addressed
NA
## Proposed Changes
- Moves the git-based versioning we were doing into the `lighthouse_version` crate in `common`.
- Removes the `beacon_node/version` crate, replacing it with `lighthouse_version`.
- Bumps the version to `v0.2.0`.
## Additional Info
There are now two types of version string:
1. `const VERSION: &str = Lighthouse/v0.2.0-1419501f2+`
1. `version_with_platform() = Lighthouse/v0.2.0-1419501f2+/x86_64-linux`
(1) is handy cause it's a `const` and shorter. (2) has platform info so it's more useful. Note that the plus-sign (`+`) indicates the the git commit is dirty (it used to be `(modified)` but I had to shorten it to fit into graffiti).
These version strings are now included on:
- `lighthouse --version`
- `lcli --version`
- `curl localhost:5052/node/version`
- p2p messages when we communicate our version
You can update the version by changing this constant (version is not related to a `Cargo.toml`):
b9ad7102d5/common/lighthouse_version/src/lib.rs (L4-L15)
## Issue Addressed
Sync was breaking occasionally. The root cause appears to be identify crashing as events we being sent to the protocol after nodes were banned. Have not been able to reproduce sync issues since this update.
## Proposed Changes
Only send messages to sub-behaviour protocols if the peer manager thinks the peer is connected. All other messages are dropped.
## Issue Addressed
The most recent gossipsub update had an issue where some privacy settings lead to not sending a sequence number with the message. Although Lighthouse treats these as valid (based on current configuration) other clients may not.
This corrects gossipsub to send sequence numbers where expected and based on the configuration settings.
## Issue Addressed
#1056
## Proposed Changes
- Add a rate limiter to the RPC behaviour. This also means the rate limiting occurs just before the door to the application level, so the number of connections a peer opens does not affect this (this would happen in the future if put on the handler)
- The algorithm used is the leaky bucket as a meter / token bucket implemented the GCRA way
- Each protocol has its own limit. Due to the way the algorithm works, the "small" protocols have a hard limit, while bbrange and bbroot allow [burstiness](https://www.wikiwand.com/en/Burstiness). This is so that a peer can't request hundreds of individual requests expecting only one block in a short period of time, it also allows a peer to send two half size requests instead of one with max if they want to without getting limited, and.. it also allows a peer to request a batch of the maximum size and then send _appropriately spaced_ requests of really small sizes. From what I've seen in sync this is plausible when reaching the target slot.
## Additional Info
Needs to be heavily tested
## Issue Addressed
NA
## Proposed Changes
Allows for multiple "hardcoded" testnets.
## Additional Info
This PR is incomplete.
## TODO
- [x] Add flag to CLI, integrate with rest of Lighthouse.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Recurring sync loop and invalid batch downloading
## Proposed Changes
Shifts the batches to include the first slot of each epoch. This ensures the finalized is always downloaded once a chain has completed syncing.
Also add in logic to prevent re-dialing disconnected peers. Non-performant peers get disconnected during sync, this prevents re-connection to these during sync.
## Additional Info
N/A
## Issue Addressed
N/A
## Proposed Changes
This provides a number of corrections and improvements to gossipsub. Specifically
- Enables options for greater privacy around the message author
- Provides greater flexibility on message validation
- Prevents unvalidated messages from being gossiped
- Shifts the duplicate cache to a time-based cache inside gossipsub
- Updates the message-id to handle bytes
- Bug fixes related to mesh maintenance and topic subscription. This should improve our attestation inclusion rate.
## Issue Addressed
#1388 partially (eth2_libp2p & network)
## Proposed Changes
TLDR at the end
- *Complex types* are 3 on the handlers/Behaviours but the types are `Poll<ComplexType>` where `ComplexType` comes from the traits of libp2p. Those, I don't thing are worth an alias. A couple more were from using tokio combinators and were removed writing things the async way and using [`BoxFuture`](https://docs.rs/futures/0.3.5/futures/future/type.BoxFuture.html)
- The *cognitive complexity*.. I tried to address those before (they come from the poll functions too) and tbh they are cognitively simpler to understand the way they are now. Moving separate parts to functions doesn't add much since that code is not repeated and they all do early returns. If moved those returns would now need to be wrapped in an Option, probably, and checked to be returned again. I would leave them like that but that's just preference.
- *Too many arguments*: They are not easily put together in a wrapping struct since the parameters don't relate semantically (Ex: fn new with a log, a reference to the chain, a peer, etc) but some may differ.
- *Needless returns* were indeed needless
## Additional Info
TLDR: removed needless return, used BoxFuture and async, left the rest untouched since those lgtm
## Issue Addressed
NA
## Proposed Changes
Adds a `valid_deposits` field to the logs whilst waiting for genesis:
```
Jul 25 11:02:25.631 INFO Waiting for more deposits valid_deposits: 3085, total_deposits: 3188, min_genesis_active_validators: 16384, service: beacon
```
In this example we can see there are `3188` deposits, but only `3085` have valid signatures.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Refactor the `bls` crate to support multiple BLS "backends" (e.g., milagro, blst, etc).
- Removes some duplicate, unused code in `common/rest_types/src/validator.rs`.
- Removes the old "upgrade legacy keypairs" functionality (these were unencrypted keys that haven't been supported for a few testnets, no one should be using them anymore).
## Additional Info
Most of the files changed are just inconsequential changes to function names.
## TODO
- [x] Optimization levels
- [x] Infinity point: https://github.com/supranational/blst/issues/11
- [x] Ensure milagro *and* blst are tested via CI
- [x] What to do with unsafe code?
- [x] Test infinity point in signature sets
## Issue Addressed
#1112
The logic is slightly different but still valid wrt to error handling.
- Inbound state is either Busy with a future that return the subtream (and info about the processing)
- The state machine works as follows:
- `Idle` with pending responses => `Busy`
- `Busy` => finished ? if so and there are new pending responses then `Busy`, if not then `Idle`
=> not finished remains `Busy`
- Add an `InboundInfo` for readability
- Other stuff:
- Close inbound substreams when all expected responses are sent
- Remove the error variants from `RPCCodedResponse` and use the codes instead
- Fix various spelling mistakes because I got sloppy last time
Sorry for the delay
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
N/A
## Proposed Changes
When parsing deposit logs, we were returning an error in case `PublicKeyBytes` or `SignatureBytes` didn't convert to valid bls `PublicKey` or `Signature` types. This would stall our import of deposit logs.
Fixes this by returning `signature_is_valid` as `false` in `DepositLog` if the bytes are invalid `PublicKey/Signature` types.
Tested this fix on the Onyx deposit contract where the bug was observed and it works correctly as expected.
## Issue Addressed
This PR makes the `Eth1Chain::use_dummy_backend` field private. I believe this could be good to ensure the consistency of a Eth1Chain instance. 💡
## Issue Addressed
https://github.com/sigp/lighthouse/issues/1177
## Proposed Changes
Add a command line option (`--http-allow-origin`) and a config item for configuring the `Access-Control-Allow-Origin` response header. This should unblock making XMLHttpRequests.
Downgrades libp2p and the gossipsub updates.
This looks to resolve the CPU usage issue we have been seeing.
The root cause is likely inside the latest gossipsub updates, which will be addressed in a later PR
## Issue Addressed
Closes#1319
## Proposed Changes
This issue:
1. Allows users to edit their Graffiti via the cli option `--graffiti`. If the graffiti is too long, lighthouse will not start and throw an error message. Otherwise, it will set the Graffiti to be the one provided by the user, right-padded with 0s.
2. Create a new `Graffiti` type and unify the code around it. With this type, everything is enforced at compile-time, and the code can be (I think...) panic-free! :)
## Additional info
Currently, only `&str` are supported, as this is the returned type by `.arg("graffiti")`.
Since this is user-input, I tried being as careful as I could. This is also why I created the `Graffiti` type, to make sure I could check as much as possible at compile time.
* Bake in Altona testnet (without genesis state)
* Add sig verification, without optimization
* Start integration with genesis service
* Update config.yml
* Fix eth2_testnet_config test
* Stop using default spec in genesis
* Fix lcli compile error
* Update min genesis time
* Fix typo
* Process exits and slashings off the network
* Fix rest_api tests
* Add op verification tests
* Add tests for pruning of slashings in the op pool
* Address Paul's review comments
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Add compute_subnet_for_attestation
* Replace CommitteeIndex topic with Attestation
* Fix warnings
* Fix attestation service tests
* fmt
* Appease clippy
* return error from validator_subscriptions
* move state out of loop
* Fix early break on error
* Get state from slot clock
* Fix beacon state in attestation tests
* Add failing test for lookahead > 1
* Minor change
* Address some review comments
* Add subnet verification to beacon chain
* Move subnet verification to processor
* Pass committee_count_at_slot to ValidatorDuty and ValidatorSubscription
* Pass subnet id for publishing attestations
* Fix attestation service tests
* Fix more tests
* Fix fork choice test
* Remove unused code
* Remove more unused and expensive code
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Make all features explicit
* Remove default feature and add missing newline to cargo.toml
* Fix compilation for --feature libp2p-websocket
Signed-off-by: pscott <scottpiriou@gmail.com>
* Remove 'with-arbitrary'
* Layer do_atomically() abstractions properly
* Reduce allocs and DRY get_key_for_col()
* Parameterize HotColdDB with hot and cold item stores
* -impl Store for MemoryStore
* Replace Store uses with HotColdDB
* Ditch Store trait
* cargo fmt
* Style fix
* Readd missing dep that broke the build
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Remove secio
* Remove ssz encoding for gossipsub
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Use ssz types for Request and error types
* Fix errors
* Constrain BlocksByRangeRequest count to MAX_REQUEST_BLOCKS
* Fix issues after rebasing
* Address review comments
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
* add retry logic to peer discovery and an expiration time for peers
* Restructure discovery
* Add mac build to CI
* Always return an error for Health when not linux
* Change macos workflow
* Rename macos tests
* Update DiscoverPeers messages to pass Instants. Implement PartialEq for AttServiceMessage
* update discover peer queueing to always check existing messages and extend min_ttl as necessary
* update method name and comment
* Correct merge issues
* Add subnet id check to partialeq, fix discover peer message dups
* fix discover peer message dups
* fix discover peer message dups for real this time
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* wip: mwake the request id optional
* make the request_id optional
* cleanup
* address clippy lints inside rpc
* WIP: Separate sent RPC events from received ones
* WIP: Separate sent RPC events from received ones
* cleanup
* Separate request ids from substream ids
* Make RPC's message handling independent of RequestIds
* Change behaviour RPC events to be more outside-crate friendly
* Propage changes across the network + router + processor
* Propage changes across the network + router + processor
* fmt
* "tiny" refactor
* more tiny refactors
* fmt eth2-libp2p
* wip: propagating changes
* wip: propagating changes
* cleaning up
* more cleanup
* fmt
* tests HOT fix
Co-authored-by: Age Manning <Age@AgeManning.com>
* Add logging on shutdown
* Replace tokio::spawn with handle.spawn
* Upgrade tokio
* Add a task executor
* Beacon chain tasks use task executor
* Validator client tasks use task executor
* Rename runtime_handle to executor
* Add duration histograms; minor fixes
* Cleanup
* Fix logs
* Fix tests
* Remove random file
* Get enr dependency instead of libp2p
* Address some review comments
* Libp2p takes a TaskExecutor
* Ugly fix libp2p tests
* Move TaskExecutor to own file
* Upgrade Dockerfile rust version
* Minor fixes
* Revert "Ugly fix libp2p tests"
This reverts commit 58d4bb690f52de28d893943b7504d2d0c6621429.
* Pretty fix libp2p tests
* Add spawn_without_exit; change Counter to Gauge
* Tidy
* Move log from RuntimeContext to TaskExecutor
* Fix errors
* Replace histogram with int_gauge for async tasks
* Fix todo
* Fix memory leak in test by exiting all spawned tasks at the end
* Update state processing for v0.12
* Fix EF test runners for v0.12
* Fix some tests
* Fix broken attestation verification test
* More test fixes
* Fix typo found in review
* Add mac build to CI
* Always return an error for Health when not linux
* Change macos workflow
* Rename macos tests
* Disable health API test on Mac
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* Remove redundant method
* Pull out a method out of a struct
* More precise db access abstractions
* Move fake trait method out of it
* cargo fmt
* Fix compilation error after refactoring
* Move another fake method out the Store trait
* Get rid of superfluous method
* Fix refactoring bug
* Rename: SimpleStoreItem -> StoreItem
* Get rid of the confusing DiskStore type alias
* Get rid of SimpleDiskStore type alias
* Correction: A method took both self and a ref to Self
* Start adding health endpoint
* Use psutil more
* Add get_health test
* Expose health to Prom
* Update comments
* Add /node/health to docs
* Update Prom naming
* expand NetworkBehaviour derive
* add handler placeholder
* add dummy custom handler wrapping the select
* cleanup behaviour's expanded impl of NetworkBehaviour
* cleanup behaviour with macro
* add missing function and clean with macros
* add custom InEvent for Behaviour's handler
* cleanup
* replace InboundProtocol with a "custom" one
* add a delegating handler to put the encapsulate the noice
* partially implement poll for handler
* partially implement poll for handler
* cleanup
* Remove warnings before merge
Co-authored-by: Age Manning <Age@AgeManning.com>
* Adds counter of received chunks to an OutboundSubstream. Ends the stream when the counter reaches the desired amount of chunks that where specified in a Request.
* Keeps track of remaining chunks for a stream, rather than expected ones and calculating the remainder on each received chunk
* WIP test, waiting for stable-futures to land in master
* Improve calculation for remaining chunks in response handler. Improve initial calculation for expected chunks in outbount substream
* Remove rebase artifact
* Fix compiler errors after rebasing on master
* Clone request to allow two accesses to it that move it when determining the amount of expected responses
* Correctly terminate the stream when all chunks have been received
* WIP: test that stream is terminated correctly
* Terminate stream with a termination response. Handle further received chunks in OutboundStream::Closing branch to return errors
* Remove request clone
* Report stream timeouts when closing
* Update rpc test
* Fix BlocksByRoot RPC test to request as many chunks as responses are expected
* Adds test for correctly termined BlocksByRoot rpc stream when all chunks have been received
Co-authored-by: Age Manning <Age@AgeManning.com>
* Port eth1 lib to use stable futures
* Port eth1_test_rig to stable futures
* Port eth1 tests to stable futures
* Port genesis service to stable futures
* Port genesis tests to stable futures
* Port beacon_chain to stable futures
* Port lcli to stable futures
* Fix eth1_test_rig (#1014)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Update hashmap hashset to stable futures
* Adds panic test to hashset delay
* Port remote_beacon_node to stable futures
* Fix lcli merge conflicts
* Non rpc stuff compiles
* protocol.rs compiles
* Port websockets, timer and notifier to stable futures (#1035)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Port remote_beacon_node to stable futures
* Partial eth2-libp2p stable future upgrade
* Finished first round of fighting RPC types
* Further progress towards porting eth2-libp2p adds caching to discovery
* Update behaviour
* RPC handler to stable futures
* Update RPC to master libp2p
* Network service additions
* Fix the fallback transport construction (#1102)
* Correct warning
* Remove hashmap delay
* Compiling version of eth2-libp2p
* Update all crates versions
* Fix conversion function and add tests (#1113)
* Port validator_client to stable futures (#1114)
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Revert "Update hashmap hashset to stable futures"
This reverts commit d432378a3cc5cd67fc29c0b15b96b886c1323554.
* Revert "Adds panic test to hashset delay"
This reverts commit 281502396fc5b90d9c421a309c2c056982c9525b.
* Ported attestation_service
* Ported duties_service
* Ported fork_service
* More ports
* Port block_service
* Minor fixes
* VC compiles
* Update TODOS
* Borrow self where possible
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Re-Fix attestation and duties service
* Minor fixes
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Network crate update to stable futures
* Port account_manager to stable futures (#1121)
* Port account_manager to stable futures
* Run async fns in tokio environment
* Port rest_api crate to stable futures (#1118)
* Port rest_api lib to stable futures
* Reduce tokio features
* Update notifier to stable futures
* Builder update
* Further updates
* Convert self referential async functions
* stable futures fixes (#1124)
* Fix eth1 update functions
* Fix genesis and client
* Fix beacon node lib
* Return appropriate runtimes from environment
* Fix test rig
* Refactor eth1 service update
* Upgrade simulator to stable futures
* Lighthouse compiles on stable futures
* Remove println debugging statement
* Update libp2p service, start rpc test upgrade
* Update network crate for new libp2p
* Update tokio::codec to futures_codec (#1128)
* Further work towards RPC corrections
* Correct http timeout and network service select
* Use tokio runtime for libp2p
* Revert "Update tokio::codec to futures_codec (#1128)"
This reverts commit e57aea924acf5cbabdcea18895ac07e38a425ed7.
* Upgrade RPC libp2p tests
* Upgrade secio fallback test
* Upgrade gossipsub examples
* Clean up RPC protocol
* Test fixes (#1133)
* Correct websocket timeout and run on os thread
* Fix network test
* Clean up PR
* Correct tokio tcp move attestation service tests
* Upgrade attestation service tests
* Correct network test
* Correct genesis test
* Test corrections
* Log info when block is received
* Modify logs and update attester service events
* Stable futures: fixes to vc, eth1 and account manager (#1142)
* Add local testnet scripts
* Remove whiteblock script
* Rename local testnet script
* Move spawns onto handle
* Fix VC panic
* Initial fix to block production issue
* Tidy block producer fix
* Tidy further
* Add local testnet clean script
* Run cargo fmt
* Tidy duties service
* Tidy fork service
* Tidy ForkService
* Tidy AttestationService
* Tidy notifier
* Ensure await is not suppressed in eth1
* Ensure await is not suppressed in account_manager
* Use .ok() instead of .unwrap_or(())
* RPC decoding test for proto
* Update discv5 and eth2-libp2p deps
* Fix lcli double runtime issue (#1144)
* Handle stream termination and dialing peer errors
* Correct peer_info variant types
* Remove unnecessary warnings
* Handle subnet unsubscription removal and improve logigng
* Add logs around ping
* Upgrade discv5 and improve logging
* Handle peer connection status for multiple connections
* Improve network service logging
* Improve logging around peer manager
* Upgrade swarm poll centralise peer management
* Identify clients on error
* Fix `remove_peer` in sync (#1150)
* remove_peer removes from all chains
* Remove logs
* Fix early return from loop
* Improved logging, fix panic
* Partially correct tests
* Stable futures: Vc sync (#1149)
* Improve syncing heuristic
* Add comments
* Use safer method for tolerance
* Fix tests
* Stable futures: Fix VC bug, update agg pool, add more metrics (#1151)
* Expose epoch processing summary
* Expose participation metrics to prometheus
* Switch to f64
* Reduce precision
* Change precision
* Expose observed attesters metrics
* Add metrics for agg/unagg attn counts
* Add metrics for gossip rx
* Add metrics for gossip tx
* Adds ignored attns to prom
* Add attestation timing
* Add timer for aggregation pool sig agg
* Add write lock timer for agg pool
* Add more metrics to agg pool
* Change map lock code
* Add extra metric to agg pool
* Change lock handling in agg pool
* Change .write() to .read()
* Add another agg pool timer
* Fix for is_aggregator
* Fix pruning bug
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Improve error handling in block iteration
* Introduce atomic DB operations
* Fix race condition
An invariant was violated: For every block hash in head_tracker, that
block is accessible from the store.
* Fix parallelism bug in exit processing
Also:
* Remove parallelism for all other operations except deposit merkle proofs
* Improve exit tests
* Fix broken attestation test
Closes#1090
* Allow for generating block/pre/post states from some unit tests (#1123)
* Add post-state checks, comments
* Add state_transition_vectors crate
* Integrate new testing crate with CI
* Add readme
* Add additional valid tests
* Remove ExitTests (they were moved to new crate)
* Small test fixes
* Delete incorrect saturating_sub in slash_validator
And clean-up the balance increase/decrease functions to look more like the spec.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Add cli flag and parse dns address
* Fail if enr udp port isn't set
* Improve docs and address parsing
* address review comments
* Remove debug statements
* Add requires condition for enr-address
* Return address in error
* track whether we have aggregate validator subscriptions to exact subnets, so we know whether or not to drop incoming attestations
* fix is aggregator check
* fix CI
Co-authored-by: Age Manning <Age@AgeManning.com>
* Prevent duplicate parent block lookups
* Updates logic for handling re-status'd peers
* Allow block lookup if the block is close to head
* Correct ordering of sync logs
* Remove comments in block processer, clean up sim
* Address compiler warning
* Prune abandoned fork choice forks
* New approach to pruning
* Wrap some block hashes in a newtype pattern
For increased type safety.
* Add Graphviz chain dump emitter for debugging
* Fix broken test case
* Make prunes_abandoned_forks use real DiskStore
* Mark finalized blocks in the GraphViz output
* Refine debug stringification of Slot and Epoch
Before this commit: print!("{:?}", Slot(123)) == "Slot(\n123\n)".
After this commit: print!("{:?", Slot(123)) == "Slot(123)".
* Simplify build_block()
* Rewrite test case using more composable test primitives
* Working rewritten test case
* Tighten fork prunning test checks
* Add another pruning test case
* Bugfix: Finalized blocks weren't always properly detected
* Pruning: Add pruning_does_not_touch_blocks_prior_to_finalization test case
* Tighten pruning tests: check if heads are tracked properly
* Add a failing test case for a buggy scenario
* Change name of function to a more accurate one
* Fix failing test case
* Test case: Were skipped slots' states pruned?
* Style fix: Simplify dereferencing
* Tighten pruning tests: check if abandoned states are deleted
* Towards atomicity of db ops
* Correct typo
* Prune also skipped slots' states
* New logic for handling skipped states
* Make skipped slots test pass
* Post conflict resolution fixes
* Formatting fixes
* Tests passing
* Block hashes in Graphviz node labels
* Removed unused changes
* Fix bug with states having < SlotsPerHistoricalRoot roots
* Consolidate State/BlockRootsIterator for pruning
* Address review feedback
* Fix a bug in pruning tests
* Detach prune_abandoned_forks() from its object
* Move migrate.rs from store to beacon_chain
* Move forks pruning onto a background thread
* Bugfix: Heads weren't pruned when prune set contained only the head
* Rename: freeze_to_state() -> process_finalization()
* Eliminate redundant function parameter
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* Add progress on new deposits
* Add deposited command to account manager
* Remove old lcli::helpers mod
* Clean clap_utils
* Refactor lcli deposit contract commands to use IPC
* Make testnet optional for environment
* Use dbg formatting for deploy address
* Add command to generate bootnode enr
* Ensure lcli returns with 1 on error
* Ensure account manager returns 1 on error
* Disallow deposits to the zero address
* Update web3 in eth1 crate
* Ensure correct lighthouse dir is created
* Reduce deposit gas requirement
* Update cargo.lock
* Add progress on new deposits
* Add deposited command to account manager
* Remove old lcli::helpers mod
* Clean clap_utils
* Refactor lcli deposit contract commands to use IPC
* Add command to generate bootnode enr
* Ensure lcli returns with 1 on error
* Ensure account manager returns 1 on error
* Update web3 in eth1 crate
* Update Cargo.lock
* Move lcli out of main install script
* Change --limit to --at-least
* Change --datadir to --validator-dir
* Remove duplication in docs
* notes from call
* should_forward function
* should_forward_block cleanup
* some cleanup and notes
* complete draft
* corrections
* some cleanup
* ran cargo fmt
* Revert "ran cargo fmt"
This reverts commit 464a5c4b62401c68fff7d36d3cd8069560a57713.
* ran cargo fmt after updating
* proposer index mods
* fmt
* new way of reading state
* fmt
* fmt
* compiles again
* fmt
* Correct stream timeout delay queue handling
* Correct small typo
* Support BlocksByRange step parameter
* Add initial docs to syncing
* Initial start of naive-attestation-aggregation
* Remove ping protocol
* Initial renaming of network services
* Correct rebasing relative to latest master
* Adds HashMapDelay struct to utils
* Initial network restructure
* Network restructure. Adds new types for v0.2.0
* Removes build artefacts
* Shift validation to beacon chain
* Temporarily remove gossip validation
This is to be updated to match current optimisation efforts.
* Adds AggregateAndProof
* Begin rebuilding pubsub encoding/decoding
* Temp commit
* Shift gossipsup decoding in eth2_libp2p
* Shifts block encoding/decoding into RPC
* Progress on attestation service
* Initial work on removing libp2p lock
* Add LRU caches to store (rollup)
* Update attestation validation for DB changes (WIP)
* Initial version of should_forward_block
* Scaffold
* Progress on attestation validation
Also, consolidate prod+testing slot clocks so that they share much
of the same implementation and can both handle sub-slot time changes.
* Removes lock from libp2p service
* Completed network lock removal
* Finish(?) attestation processing
* Correct network termination future
* Add slot check to block check
* Correct fmt issues
* Remove Drop implementation for network service
* Address reviewers suggestions
* Modification of validator for subscriptions
* Add slot signing to validator client
* Further progress on validation subscription
* Register SSZ snappy protocol messages
* Add initial idea of snappy compressed Codec by replacing the UVI codec with the snap library
* Fix matching against protocol string
* Adds TODOs for implementation work
* Implements check against max packet size before attempting to decode snappy compressed packages
* Add ssz_snappy codec
* Adds necessary validator subscription functionality
* Progress on snappy codec
* Clean up validator <-> beacon node http types
* Add aggregator status to ValidatorDuty
* clear buffer after decoding
* Impl Clone for manual slot clock
* Fix minor errors
* Further progress validator client subscription
* Initial subscription and aggregation handling
* Progress to modifying val client for attestation aggregation
* First draft of validator client upgrade for aggregate attestations
* Trying something
* Length prefix compressed data
* Fix gossipsub tests
* Working snappy frames with compressed length prefix
* Removes lock on a network channel
* Partially implement beacon node subscription http api
* Uncompressed length prefix working
* Cleanup
* Remove Testing request and response
* Return codec from match statement; reduce code duplication
* Fix unsafe unwrap in Outbound decode
* Add length checks
* All encode/decode functions use snappy frame format
* Add a `full` BeaconBlock method
* Add executable to test rpc against other impls
* Remove unused code; minor fixes
* Add PH & MS slot clock changes
* Account for genesis time
* Use checked mul
* Account for genesis slot
* Change API
* Refactor "duration to..." functions
* Re-merge updated block processing to v0.2.0 (#962)
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Disable/delete two outdated tests
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Remove decompressed member from pubkey bytes
* Add hashmap for indices lookup
* Add state cache, remove store cache
* Only build the head committee cache
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Tidy
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Tidy
* Fix todos
* Improve tests
* Fix compile error
* Fix compile error from merge
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Rename state_cache -> checkpoint_cache
* Rename Checkpoint -> Snapshot
* Tidy, add comments
* Tidy up find_head function
* Change some checkpoint -> snapshot
* Add tests
* Expose max_len
* Remove dead code
* Tidy
* Fix bug
* Add sync-speed metric
* Add first attempt at VerifiableBlock
* Start integrating into beacon chain
* Integrate VerifiableBlock
* Rename VerifableBlock -> PartialBlockVerification
* Add start of typed methods
* Add progress
* Add further progress
* Rename structs
* Add full block verification to block_processing.rs
* Further beacon chain integration
* Update checks for gossip
* Add todo
* Start adding segement verification
* Add passing chain segement test
* Initial integration with batch sync
* Minor changes
* Tidy, add more error checking
* Start adding chain_segment tests
* Finish invalid signature tests
* Include single and gossip verified blocks in tests
* Add gossip verification tests
* Start adding docs
* Finish adding comments to block_processing.rs
* Rename block_processing.rs -> block_verification
* Start removing old block processing code
* Fixes beacon_chain compilation
* Fix project-wide compile errors
* Remove old code
* Fix bug with beacon proposer index
* Fix shim for BlockProcessingError
* Only process one epoch at a time
* Fix loop in chain segment processing
* Add caching for state.eth1_data_votes
* Add BeaconChain::validator_pubkey
* Revert "Add caching for state.eth1_data_votes"
This reverts commit cd73dcd6434fb8d8e6bf30c5356355598ea7b78e.
* Add sync-speed metric (#898)
* Add PH & MS slot clock changes
* Account for genesis time
* Use checked mul
* Account for genesis slot
* Change API
* Allow for clock disparity
* Refactor "duration to..." functions
* Ensure errors are returned during batch processing
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Enr fork (#967)
* Start fixing enr-fork-id
* Fix time-until-next-fork logic
* Remove fork crate
* Update any references to beacon_chain.spec.milliseconds_per_slot to beacon_chain.slot_clock.slot_diration().as_nillis() in the attestation service. (#968)
* Process network attestations (#966)
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Disable/delete two outdated tests
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Remove decompressed member from pubkey bytes
* Add hashmap for indices lookup
* Add state cache, remove store cache
* Only build the head committee cache
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Tidy
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Tidy
* Fix todos
* Improve tests
* Fix compile error
* Fix compile error from merge
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Rename state_cache -> checkpoint_cache
* Rename Checkpoint -> Snapshot
* Tidy, add comments
* Tidy up find_head function
* Change some checkpoint -> snapshot
* Add tests
* Expose max_len
* Remove dead code
* Tidy
* Fix bug
* Add sync-speed metric
* Add first attempt at VerifiableBlock
* Start integrating into beacon chain
* Integrate VerifiableBlock
* Rename VerifableBlock -> PartialBlockVerification
* Add start of typed methods
* Add progress
* Add further progress
* Rename structs
* Add full block verification to block_processing.rs
* Further beacon chain integration
* Update checks for gossip
* Add todo
* Start adding segement verification
* Add passing chain segement test
* Initial integration with batch sync
* Minor changes
* Tidy, add more error checking
* Start adding chain_segment tests
* Finish invalid signature tests
* Include single and gossip verified blocks in tests
* Add gossip verification tests
* Start adding docs
* Finish adding comments to block_processing.rs
* Rename block_processing.rs -> block_verification
* Start removing old block processing code
* Fixes beacon_chain compilation
* Fix project-wide compile errors
* Remove old code
* Fix bug with beacon proposer index
* Fix shim for BlockProcessingError
* Only process one epoch at a time
* Fix loop in chain segment processing
* Add caching for state.eth1_data_votes
* Add BeaconChain::validator_pubkey
* Revert "Add caching for state.eth1_data_votes"
This reverts commit cd73dcd6434fb8d8e6bf30c5356355598ea7b78e.
* Allow for clock disparity
* Ensure errors are returned during batch processing
* Add block gossip verification
* Connect attestation processing to beacon chain
* Optimistically subscribe to subnets on the same slot
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Update /validator/subscribe (#969)
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Remove unused function
* Upgrade sim (#972)
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Add the no-eth1-sim, refactor sim
* Sends discovery for persistent subnets (#973)
* main takes cmdline arguments
* Add test script
* Fix errors
* snappy uses Uvi to encode/decode length prefix
* Add more comments
* Run fmt
Co-authored-by: Grant Wuerker <gwuerker@gmail.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: b-m-f <max@ehlers.berlin>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
* Connect sync logic to network globals
* Add further sync info to sync status
* Build new syncing HTTP API methods
* Fix bug in updating sync state
* Highest slot is current slot
* Update book for syncing API
* Minor log bumps
* Initial building of extended RPC methods
* Wire in extended RPC methods
* Merge initial peer management template
* Add a PeerDB and give the peer manager some basic functions
* Initial connection of peer manager
* Add peer manager to lighthouse
* Connect peer manager with new RPC methods
* Correct tests and metadata RPC
Co-authored-by: Diva <divma@protonmail.com>
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Disable/delete two outdated tests
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Remove decompressed member from pubkey bytes
* Add hashmap for indices lookup
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Tidy
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Tidy
* Fix todos
* Improve tests
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Add BeaconChain::validator_pubkey
* Use Option::filter
* Remove Box
* Comment out tests that fail due to hard-coded
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
* order of operations fix in the duration_to_next_slot calculation
* use slot_clock.duration_to_slot() to simplify the duration_to_subscribe calculation
* fix error message
* Move the codes that loads Eth2Config from config to environment
* Move the codes that setups Eth2Config for testnet
* Move the codes that creates a new ChainSpec
* Remove unused `mut`
* Reduce local variable number
* Remove unused outputs of config::get_configs()
* Change the method name from plural to singular
* DRY the const `ETH2_CONFIG_FILENAME`
* Add comments
* Remove unnecessary blank line
* cargo fmt
* Add tests for EnvironmentBuilder::setup_eth2_config()
* Remove the comment that have been fixed
* Reduce local variable
* Remove redundant local variable
* Remove prysm-specific codes
Now the spec is in the eth2-testnets repo
* Sends attestations to the attestation service for processing
* Adds 'attnets' field to local ENR
* Adds ENR bitfield modification logic
* Link attestation service to discovery
- Updates discv5
- Links discover events to discovery
- Support for ENRBitfield
* Adds discovery config params, correct warnings
* Rust fmt fixes
* Correct tests
* Refactor `Attestation` production
* Add constant
* Start refactor for aggregation
* Return early when no attesting validators
* Refactor into individual functions
* Tidy, add comments
* Add first draft of NaiveAggregationPool
* Further progress on naive aggregation pool
* Fix compile errors in VC
* Change locking logic for naive pool
* Introduce AttesationType
* Add pruning, comments
* Add MAX_ATTESTATIONS_PER_SLOT restriction
* Add pruning based on slot
* Update BN for new aggregation fns
* Fix test compile errors
* Fix failing rest_api test
* Move SignedAggregateAndProof into own file
* Update docs, fix warning
* Tidy some formatting in validator API
* Remove T::default_spec from signing
* Fix failing rest test
* Tidy
* Add test, fix bug
* Improve naive pool tests
* Add max attestations test
* Revert changes to the op_pool
* Refactor timer
* Merge #913
* Correct release tests
* Completed release test corrections
* Initial work on upgrading discovery
* Updates discovery to latest version
* Update ENR initialisation logic
* Remove debug statements
* Shifts timing units to slots
* Initial work
* Add initial fork versioning and EnrForkId
* Correct linking for EnrForkId
* Adds eth2 field to local ENR
* Initial work to eth2 field integration
* Integrate eth2 field into discovery
* temp commit
* Add a timer to adjust fork versions during a hard fork for the ENR
* Upgrade the parent lookup logic
* Apply reviewer suggestions
* move the parent lookup process to a dedicated thread
* move the logic of parent lookup and range syncing to a block processor
* review suggestions
* more review suggestions
* Add small logging changes
* Process parent lookups in reverse
Co-authored-by: Age Manning <Age@AgeManning.com>
* Remove ping protocol
* Initial renaming of network services
* Correct rebasing relative to latest master
* Start updating types
* Adds HashMapDelay struct to utils
* Initial network restructure
* Network restructure. Adds new types for v0.2.0
* Removes build artefacts
* Shift validation to beacon chain
* Temporarily remove gossip validation
This is to be updated to match current optimisation efforts.
* Adds AggregateAndProof
* Begin rebuilding pubsub encoding/decoding
* Signature hacking
* Shift gossipsup decoding into eth2_libp2p
* Existing EF tests passing with fake_crypto
* Shifts block encoding/decoding into RPC
* Delete outdated API spec
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Fast aggregate verify test
* Update REST API docs
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Progress on attestation service
* Address review comments; remove unused dependency
* Initial work on removing libp2p lock
* Add LRU caches to store (rollup)
* Update attestation validation for DB changes (WIP)
* Initial version of should_forward_block
* Scaffold
* Progress on attestation validation
Also, consolidate prod+testing slot clocks so that they share much
of the same implementation and can both handle sub-slot time changes.
* Removes lock from libp2p service
* Completed network lock removal
* Finish(?) attestation processing
* Correct network termination future
* Add slot check to block check
* Correct fmt issues
* Remove Drop implementation for network service
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Address reviewers suggestions
* Disable/delete two outdated tests
* Modification of validator for subscriptions
* Add slot signing to validator client
* Further progress on validation subscription
* Adds necessary validator subscription functionality
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Clean up validator <-> beacon node http types
* Add aggregator status to ValidatorDuty
* Impl Clone for manual slot clock
* Fix minor errors
* Further progress validator client subscription
* Initial subscription and aggregation handling
* Remove decompressed member from pubkey bytes
* Progress to modifying val client for attestation aggregation
* First draft of validator client upgrade for aggregate attestations
* Add hashmap for indices lookup
* Add state cache, remove store cache
* Only build the head committee cache
* Removes lock on a network channel
* Partially implement beacon node subscription http api
* Correct compilation issues
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Partial implementation of timer
* Adds timer, removes exit_future, http api to op pool
* Partial multiple aggregate attestation handling
* Permits bulk messages accross gossipsub network channel
* Correct compile issues
* Improve gosispsub messaging and correct rest api helpers
* Added global gossipsub subscriptions
* Update validator subscriptions data structs
* Tidy
* Re-structure validator subscriptions
* Initial handling of subscriptions
* Re-structure network service
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add HashSetDelay and introduce into attestation service
* Handles validator subscriptions
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Peer subnet discovery gets queued for future subscriptions
* Reorganise attestation service functions
* Initial wiring of attestation service
* First draft of attestation service timing logic
* Correct minor typos
* Tidy
* Fix todos
* Improve tests
* Add PeerInfo to connected peers mapping
* Fix compile error
* Fix compile error from merge
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Rename state_cache -> checkpoint_cache
* Rename Checkpoint -> Snapshot
* Tidy, add comments
* Tidy up find_head function
* Change some checkpoint -> snapshot
* Add tests
* Expose max_len
* Remove dead code
* Tidy
* Fix bug
* Add sync-speed metric
* Add first attempt at VerifiableBlock
* Start integrating into beacon chain
* Integrate VerifiableBlock
* Rename VerifableBlock -> PartialBlockVerification
* Add start of typed methods
* Add progress
* Add further progress
* Rename structs
* Add full block verification to block_processing.rs
* Further beacon chain integration
* Update checks for gossip
* Add todo
* Start adding segement verification
* Add passing chain segement test
* Initial integration with batch sync
* Minor changes
* Tidy, add more error checking
* Start adding chain_segment tests
* Finish invalid signature tests
* Include single and gossip verified blocks in tests
* Add gossip verification tests
* Start adding docs
* Finish adding comments to block_processing.rs
* Rename block_processing.rs -> block_verification
* Start removing old block processing code
* Fixes beacon_chain compilation
* Fix project-wide compile errors
* Remove old code
* Correct code to pass all tests
* Fix bug with beacon proposer index
* Fix shim for BlockProcessingError
* Only process one epoch at a time
* Fix loop in chain segment processing
* Correct tests from master merge
* Add caching for state.eth1_data_votes
* Add BeaconChain::validator_pubkey
* Revert "Add caching for state.eth1_data_votes"
This reverts commit cd73dcd6434fb8d8e6bf30c5356355598ea7b78e.
Co-authored-by: Grant Wuerker <gwuerker@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Unfinished progress
* Update more persistence code
* Start fixing tests
* Combine persist head and fork choice
* Persist head on reorg
* Gracefully handle op pool and eth1 cache missing
* Fix test failure
* Address Michael's comments
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Disable/delete two outdated tests
* Tidy
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Tidy
* Fix todos
* Add attestation processing tests
* Add another test
* Only run attestation tests in release
* Make attestation tests MainnetEthSpec
* Address Michael's comments
* Remove redundant check
* Fix warning
* Fix failing test
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Start adding interop genesis state to lcli
* Use more efficient method to generate genesis state
* Remove duplicate int_to_bytes32
* Add lcli command to change state genesis time
* Add option to allow VC to start with unsynced BN
* Set VC to do parallel key loading
* Don't default to dummy eth1 backend
* Add endpoint to dump operation pool
* Add metrics for op pool
* Remove state clone for slot notifier
* Add mem size approximation for tree hash cache
* Avoid cloning tree hash when getting head
* Avoid cloning tree hash when getting head
* Add working arena-based cached tree hash
* Add another benchmark
* Add pre-allocation for caches
* Make cache nullable
* Fix bugs in cache tree hash
* Add validator tree hash optimization
* Optimize hash_concat
* Make hash32_concat return fixed-len array
* Fix failing API tests
* Add new beacon state cache struct
* Add validator-specific cache
* Separate list and values arenas
* Add parallel validator registry hashing
* Remove MultiTreeHashCache
* Remove cached tree hash macro
* Fix failing tree hash test
* Address Michael's comments
* Add CachedTreeHash impl for ef tests
* Fix messy merge conflict
* Optimize attestation production
* Add first basic optimizations
* Fix SlotOutOfBounds error
* Resolved missed merge conflicts
* Fix another missed merge conflict
* Fix more merge conflict issues
* Add `StateSkipConfig`
* Fix test compile errors
* Add failing test
* Fix bug, make tests pass
* Add comment
* Delete unused function
* Replace deleted comment
* Add noise support with fallback to secio
* Add config parameter for noise support
* Add secio/noise compatibility test
* Cleanup
* Remove config parameter for noise support
* Modify test to work between a secio swarm and a noise libp2p service
* Minor fixes
* Remove deprecated api_spec.yaml
* add prototype for proposer slashing
* remove clippy warnings
* Add proposer_slashing API
* Prototype for attester slashing API call
* Fix logic error in operation pool
* Finish test for attester_slashing api call
* Clean proposer_slashing test
* Cargo fmt
* Remove useless to_string after format! macro
* Cargo fmt
* Update book with new api calls
* Re-enable proposer slashing verification
* Update book with appropriate test example
* Fix proposer_slashing test
* Update comments and tests for clearer code
* Remove extraneous comments
* Fix test
* Minor fix
* Address reviewer comments
Co-authored-by: pscott <30843220+pscott@users.noreply.github.com>
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Disable/delete two outdated tests
* Bump eth1 default vote warn to error
* Delete outdated eth1 test
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Add LRU caches to store
* Improvements to LRU caches
* Take state by value in `Store::put_state`
* Store blocks by value, configurable cache sizes
* Use a StateBatch to efficiently store skip states
* Fix store tests
* Add CloneConfig test, remove unused metrics
* Use Mutexes instead of RwLocks for LRU caches
* Start adding interop genesis state to lcli
* Use more efficient method to generate genesis state
* Remove duplicate int_to_bytes32
* Add lcli command to change state genesis time
* Add option to allow VC to start with unsynced BN
* Set VC to do parallel key loading
* Don't default to dummy eth1 backend
* Add endpoint to dump operation pool
* Add metrics for op pool
* Remove state clone for slot notifier
* Add mem size approximation for tree hash cache
* Avoid cloning tree hash when getting head
* Fix failing API tests
* Address Michael's comments
* Add HashMap::from_par_iter
* Store dht enrs on shutdown
* Load enrs on startup and add tests
* Remove enr_entries from behavior
* Move all dht persisting logic to `NetworkService`
* Move `PersistedDht` from eth2-libp2p to network crate
* Add test to confirm dht persistence
* Add logging
* Remove extra call to beacon_chain persist
* Expose only mutable `add_enr` method from behaviour
* Fix tests
* Fix merge errors
* Update op_pool to use proper rewards
* Fix missing use import for tests
* Address Michael's comments
* Revert to private ValidatorStatuses
* Rename variable for clearer code
* Fix update_cover function
* Remove expect
* Add WIP test for rewards
* Use aggregation_bits instead of earliest_attestation_validators
* Use earliest attestation in test and correct typo
* Fix op_pool test thanks to @michaelsproul 's help
* Change test name
This should reduce disk usage by 32x while keeping historical state queries to
less than 10s. If historical states are required quickly, the minimum SPRP of 32
can be set on the CLI.
* Sparse hot DB and block root tree
* Fix store_tests
* Ensure loads of hot states on boundaries are fast
* Milder error for unaligned finalized blocks
* Add TimeoutRwLock to BeaconChain
* Update network crate
* Update rest api
* Fix beacon chain tests
* Fix rest api tests
* Set test back to !debug_assertions
* Set random port when zero-port option is set
* Remove logic allowing lighthouse to update its own ENR
* Discovery address is set to localhost by default
* Return error if discovery-addr isn't explicit
* Add functions to get deposit_count and deposit_root from deposit cache
* Fetch deposit root and deposit count from cache
* Fix bugs
* Add test
* Compare deposit_count between the caching and http eth1 blocks
* Revert "Compare deposit_count between the caching and http eth1 blocks"
This reverts commit e3d0325ae6d1040976d37eddf35fcc7ff2333cb8.
* Fetch deposit cache using binary search instead of linear search
* BlockCache waits till DepositCache is in sync
* Truncate required_blocks in block_cache upto latest_processed_block in deposit cache
* Clean up
* Handled getting deposit count before deploying deposit contract
* More cleanup
* Remove calls to http get deposit/count
* Fix block cache tests
* Minor changes
* Fix bootnode ports
* Address some of Paul's comments
* Optimize `get_deposit_root` by caching `DepositDataTree`
* Fix comments and minor changes
* Change eth1 default config parameters
* Use `Vec` instead of `HashMap` to store `deposit_roots`
* Minor renaming
* add support for gzip
* Fix clippy warnings
* Fix additional clippy warnings and optimized get_deposits function
* Fix get_deposits function call
* Add simulator to CI
* Install ganache before running sim
* Apply clippy lints to beacon node
* Remove unnecessary logging and correct formatting
* Initial bones of load-balanced range-sync
* Port bump meshsup tests
* Further structure and network handling logic added
* Basic structure, ignoring error handling
* Correct max peers delay bug
* Clean up and re-write message processor and sync manager
* Restructure directory, correct type issues
* Fix compiler issues
* Completed first testing of new sync
* Correct merge issues
* Clean up warnings
* Push attestation processed log down to dbg
* Add state enc/dec benches
* Correct math error, downgraded logs
* Add example for flamegraph
* Use `PublicKeyBytes` for `Validator`
* Ripple PublicKeyBytes change through codebase
* Add RPC error handling and improved syncing code
* Add benches, optimizations to store BeaconState
* Store BeaconState in StorageContainer too
* Optimize StorageContainer with std::mem magic
* Add libp2p stream error handling and dropping of invalid peers
* Lower logs
* Update lcli to parse spec at boot, remove pycli
* Fix issues when starting with mainnet spec
* Set default spec to mainnet
* Fix lcli --spec param
* Add discovery tweak
* Ensure ETH1_FOLLOW_DISTANCE is in YamlConfig
* Set testnet ETH1_FOLLOW_DISTANCE to 16
* Fix rest_api tests
* Set testnet min validator count
* Update with new testnet dir
* Remove some dbg, println
* Add timeout when notifier waits for libp2p lock
* Add validator count CLI flag to lcli contract deploy
* Extend genesis delay time
* Correct libp2p service locking
* Update testnet dir
* Add basic block/state caching on beacon chain
* Add decimals display to notifier sync speed
* Try merge in change to reduce fork choice calls
* Remove fork choice from process block
* Minor log fix
* Check successes > 0
* Adds checkpoint cache
* Stop storing the tree hash cache in the db
* Handles peer disconnects for sync
* Fix failing beacon chain tests
* Change eth2_testnet_config tests to Mainnet
* Add logs downgrade discovery log
* Remove dedunant beacon state write
* Fix re-org warnings
* Use caching get methods in fork choice
* Fix mistake in prev commit
* Use caching state getting in state_by_slot
* Add state.cacheless_clone
* Less fork choice (#679)
* Try merge in change to reduce fork choice calls
* Remove fork choice from process block
* Minor log fix
* Check successes > 0
* Fix failing beacon chain tests
* Fix re-org warnings
* Fix mistake in prev commit
* Attempt to improve attestation processing times
* Introduce HeadInfo struct
* Used cache tree hash for block processing
* Use cached tree hash for block production too
* Range sync refactor
- Introduces `ChainCollection`
- Correct Disconnect node handling
- Removes duplicate code
* Add more logging for DB
* Various bug fixes
* Remove unnecessary logs
* Maintain syncing state in the transition from finalied to head
* Improved disconnect handling
* Add `Speedo` struct
* Fix bugs in speedo
* Fix bug in speedo
* Fix rounding bug in speedo
* Move code around, reduce speedo observation count
* Adds forwards block interator
* Fix inf NaN
* Add first draft of validator onboarding
* Update docs
* Add documentation link to main README
* Continue docs development
* Update book readme
* Update docs
* Allow vc to run without testnet subcommand
* Small change to onboarding docs
* Tidy CLI help messages
* Update docs
* Add check to val client see if beacon node is synced
* Attempt to fix NaN bug
* Fix compile bug
* Add notifier service to validator client
* Re-order onboarding steps
* Update deposit contract address
* Update testnet dir
* Add note about public eth1 node
* Fix installation link
* Set default eth1 endpoint to sigp
* Fix broken test
* Try fix eth1 cache locking
* Be more specific about eth1 endpoint
* Increase gas limit for deposit
* Fix default deposit amount
* Fix re-org log
* Add first draft of validator onboarding
* Update docs
* Add documentation link to main README
* Continue docs development
* Update book readme
* Update docs
* Allow vc to run without testnet subcommand
* Small change to onboarding docs
* Tidy CLI help messages
* Update docs
* Add check to val client see if beacon node is synced
* Add notifier service to validator client
* Re-order onboarding steps
* Update deposit contract address
* Update testnet dir
* Add note about public eth1 node
* Set default eth1 endpoint to sigp
* Fix broken test
* Try fix eth1 cache locking
* Be more specific about eth1 endpoint
* Increase gas limit for deposit
* Fix default deposit amount
* Update lcli to parse spec at boot, remove pycli
* Fix issues when starting with mainnet spec
* Set default spec to mainnet
* Ensure ETH1_FOLLOW_DISTANCE is in YamlConfig
* Set testnet ETH1_FOLLOW_DISTANCE to 16
* Set testnet min validator count
* Add validator count CLI flag to lcli contract deploy
* Extend genesis delay time
* Add basic block/state caching on beacon chain
* Adds checkpoint cache
* Stop storing the tree hash cache in the db
* Remove dedunant beacon state write
* Use caching get methods in fork choice
* Use caching state getting in state_by_slot
* Add state.cacheless_clone
* Attempt to improve attestation processing times
* Introduce HeadInfo struct
* Used cache tree hash for block processing
* Use cached tree hash for block production too
* Squish prev commits into a single atop master
* Enable http and ws during testing
* Checkout clobbered files from master
* Further un-clobber rest_api changes
* Tidy formatting
* Do rust-fmt's job for it :|
* Add state enc/dec benches
* Add example for flamegraph
* Use `PublicKeyBytes` for `Validator`
* Ripple PublicKeyBytes change through codebase
* Add benches, optimizations to store BeaconState
* Store BeaconState in StorageContainer too
* Optimize StorageContainer with std::mem magic
* Fix rest_api tests
* Draft of checkpoint freezer DB
* Fix bugs
* Adjust root iterators for checkpoint database
* Fix freezer state lookups with no slot hint
* Fix split comment
* Use "restore point" to refer to frozen states
* Resolve some FIXMEs
* Configurable slots per restore point
* Document new freezer DB functions
* Fix up StoreConfig
* Fix new test for merge
* Document SPRP default CLI flag, clarify tests
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Add `validator` changes from `validator-to-rest`
* Add initial (failing) REST api tests
* Fix signature parsing
* Add more tests
* Refactor http router
* Add working tests for publish beacon block
* Add validator duties tests
* Move account_manager under `lighthouse` binary
* Unify logfile handling in `environment` crate.
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Add `deposit_contract` crate
* Add progress on validator onboarding
* Add unfinished attesation code
* Update account manager CLI
* Write eth1 data file as hex string
* Integrate ValidatorDirectory with validator_client
* Move ValidatorDirectory into validator_client
* Clean up some FIXMEs
* Add beacon_chain_sim
* Fix a few docs/logs
* Expand `beacon_chain_sim`
* Fix spec for `beacon_chain_sim
* More testing for api
* Start work on attestation endpoint
* Reject empty attestations
* Allow attestations to genesis block
* Add working tests for `rest_api` validator endpoint
* Remove grpc from beacon_node
* Start heavy refactor of validator client
- Block production is working
* Prune old validator client files
* Start works on attestation service
* Add attestation service to validator client
* Use full pubkey for validator directories
* Add validator duties post endpoint
* Use par_iter for keypair generation
* Use bulk duties request in validator client
* Add version http endpoint tests
* Add interop keys and startup wait
* Ensure a prompt exit
* Add duties pruning
* Fix compile error in beacon node tests
* Add github workflow
* Modify rust.yaml
* Modify gitlab actions
* Add to CI file
* Add sudo to CI npm install
* Move cargo fmt to own job in tests
* Fix cargo fmt in CI
* Add rustup update before cargo fmt
* Change name of CI job
* Make other CI jobs require cargo fmt
* Add CI badge
* Remove gitlab and travis files
* Add different http timeout for debug
* Update docker file, use makefile in CI
* Use make in the dockerfile, skip the test
* Use the makefile for debug GI test
* Update book
* Tidy grpc and misc things
* Apply discv5 fixes
* Address other minor issues
* Fix warnings
* Attempt fix for addr parsing
* Tidy validator config, CLIs
* Tidy comments
* Tidy signing, reduce ForkService duplication
* Fail if skipping too many slots
* Set default recent genesis time to 0
* Add custom http timeout to validator
* Fix compile bug in node_test_rig
* Remove old bootstrap flag from val CLI
* Update docs
* Tidy val client
* Change val client log levels
* Add comments, more validity checks
* Fix compile error, add comments
* Undo changes to eth2-libp2p/src
* Reduce duplication of keypair generation
* Add more logging for validator duties
* Fix beacon_chain_sim, nitpicks
* Fix compile error, minor nits
* Update to use v0.9.2 version of deposit contract
* Add efforts to automate eth1 testnet deployment
* Fix lcli testnet deployer
* Modify bn CLI to parse eth2_testnet_dir
* Progress with account_manager deposit tools
* Make account manager submit deposits
* Add password option for submitting deposits
* Allow custom deposit amount
* Add long names to lcli clap
* Add password option to lcli deploy command
* Fix minor bugs whilst testing
* Address Michael's comments
* Add refund-deposit-contract to lcli
* Use time instead of skip count for denying long skips
* Improve logging for eth1
* Fix bug with validator services exiting on error
* Drop the block cache after genesis
* Modify eth1 testnet config
* Improve eth1 logging
* Make validator wait until genesis time
* Fix bug in eth1 voting
* Add more logging to eth1 voting
* Handle errors in eth1 http module
* Set SECONDS_PER_DAY to sensible minimum
* Shorten delay before testnet start
* Ensure eth1 block is produced without any votes
* Improve eth1 logging
* Fix broken tests in eth1
* Tidy code in rest_api
* Fix failing test in deposit_contract
* Make CLI args more consistent
* Change validator/duties endpoint
* Add time-based skip slot limiting
* Add new error type missed in previous commit
* Add log when waiting for genesis
* Refactor beacon node CLI
* Remove unused dep
* Add lcli eth1-genesis command
* Fix bug in master merge
* Apply clippy lints to beacon node
* Add support for YamlConfig in Eth2TestnetDir
* Upgrade tesnet deposit contract version
* Remove unnecessary logging and correct formatting
* Add a hardcoded eth2 testnet config
* Ensure http server flag works. Overwrite configs with flags.
* Ensure boot nodes are loaded from testnet dir
* Fix account manager CLI bugs
* Fix bugs with beacon node cli
* Allow testnet dir without boot nodes
* Write genesis state as SSZ
* Remove ---/n from the start of testnet_dir files
* Set default libp2p address
* Tidy account manager CLI, add logging
* Add check to see if testnet dir exists
* Apply reviewers suggestions
* Add HeadTracker struct
* Add fork choice persistence
* Shorten slot time for simulator
* Add the /beacon/heads API endpoint
* Update hardcoded testnet
* Add tests for BeaconChain persistence + fix bugs
* Extend BeaconChain persistence testing
* Ensure chain is finalized b4 persistence tests
* Ensure boot_enr.yaml is include in binary
* Refactor beacon_chain_sim
* Move files about in beacon sim
* Update beacon_chain_sim
* Fix bug with deposit inclusion
* Increase log in genesis service, fix todo
* Tidy sim, fix broken rest_api tests
* Fix more broken tests
* Update testnet
* Fix broken rest api test
* Tidy account manager CLI
* Use tempdir for account manager
* Stop hardcoded testnet dir from creating dir
* Rename Eth2TestnetDir to Eth2TestnetConfig
* Change hardcoded -> hard_coded
* Tidy account manager
* Add log to account manager
* Tidy, ensure head tracker is loaded from disk
* Tidy beacon chain builder
* Tidy eth1_chain
* Adds log support for simulator
* Revert "Adds log support for simulator"
This reverts commit ec77c66a052350f551db145cf20f213823428dd3.
* Adds log support for simulator
* Tidy after self-review
* Change default log level
* Address Michael's delicious PR comments
* Fix off-by-one in tests
* Create libp2p instance
* Change logger to stdlog
* test_connection initial commit
* Add gossipsub test
* Delete tests in network crate
* Add test module
* Clean tests
* Remove dependency on discovery
* Working publish between 2 nodes
TODO: Publish should be called just once
* Working 2 peer gossipsub test with additional events
* Cleanup test
* Add rpc test
* Star topology discovery WIP
* build_nodes builds and connects n nodes. Increase nodes in gossipsub test
* Add unsubscribe method and expose reference to gossipsub object for gossipsub tests
* Add gossipsub message forwarding test
* Fix gossipsub forward test
* Test improvements
* Remove discovery tests
* Simplify gossipsub forward test topology
* Add helper functions for topology building
* Clean up tests
* Update naming to new network spec
* Correct ssz encoding of protocol names
* Further additions to network upgrade
* Initial network spec update WIP
* Temp commit
* Builds one side of the streamed RPC responses
* Temporary commit
* Propagates streaming changes up into message handler
* Intermediate network update
* Partial update in upgrading to the new network spec
* Update dependencies, remove redundant deps
* Correct sync manager for block stream handling
* Re-write of RPC handler, improves efficiency and corrects bugs
* Stream termination update
* Completed refactor of rpc handler
* Remove crates
* Correct compile issues associated with test merge
* Build basic tests and testing structure for eth2-libp2p
* Enhance RPC tests and add logging
* Complete RPC testing framework and STATUS test
* Decoding bug fixes, log improvements, stream test
* Clean up RPC handler logging
* Decoder bug fix, empty block stream test
* Add BlocksByRoot RPC test
* Add Goodbye RPC test
* Syncing and stream handling bug fixes and performance improvements
* Applies discv5 bug fixes
* Adds DHT IP filtering for lighthouse - currently disabled
* Adds randomized network propagation as a CLI arg
* Add disconnect functionality
* Adds attestation handling and parent lookup
* Adds RPC error handling for the sync manager
* Allow parent's blocks to be already processed
* Update github workflow
* Adds reviewer suggestions
* Implement freezer database for state vectors
* Improve BeaconState safe accessors
And fix a bug in the compact committees accessor.
* Banish dodgy type bounds back to gRPC
* Clean up
* Switch to exclusive end points in chunked vec
* Cleaning up and start of tests
* Randao fix, more tests
* Fix unsightly hack
* Resolve test FIXMEs
* Config file support
* More clean-ups, migrator beginnings
* Finish migrator, integrate into BeaconChain
* Fixups
* Fix store tests
* Fix BeaconChain tests
* Fix LMD GHOST tests
* Address review comments, delete 'static bounds
* Cargo format
* Address review comments
* Fix LMD ghost tests
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Clean up some FIXMEs
* Fix a few docs/logs
* Update for new builder paradigm, spec changes
* Freezer DB integration into BeaconNode
* Cleaning up
* This works, clean it up
* Cleanups
* Fix and improve store tests
* Refine store test
* Delete unused beacon_chain_builder.rs
* Fix CLI
* Store state at split slot in hot database
* Make fork choice lookup fast again
* Store freezer DB split slot in the database
* Handle potential div by 0 in chunked_vector
* Exclude committee caches from freezer DB
* Remove FIXME about long-running test
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Add `validator` changes from `validator-to-rest`
* Add initial (failing) REST api tests
* Fix signature parsing
* Add more tests
* Refactor http router
* Add working tests for publish beacon block
* Add validator duties tests
* Move account_manager under `lighthouse` binary
* Unify logfile handling in `environment` crate.
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Add `deposit_contract` crate
* Add progress on validator onboarding
* Add unfinished attesation code
* Update account manager CLI
* Write eth1 data file as hex string
* Integrate ValidatorDirectory with validator_client
* Move ValidatorDirectory into validator_client
* Clean up some FIXMEs
* Add beacon_chain_sim
* Fix a few docs/logs
* Expand `beacon_chain_sim`
* Fix spec for `beacon_chain_sim
* More testing for api
* Start work on attestation endpoint
* Reject empty attestations
* Allow attestations to genesis block
* Add working tests for `rest_api` validator endpoint
* Remove grpc from beacon_node
* Start heavy refactor of validator client
- Block production is working
* Prune old validator client files
* Start works on attestation service
* Add attestation service to validator client
* Use full pubkey for validator directories
* Add validator duties post endpoint
* Use par_iter for keypair generation
* Use bulk duties request in validator client
* Add version http endpoint tests
* Add interop keys and startup wait
* Ensure a prompt exit
* Add duties pruning
* Fix compile error in beacon node tests
* Add github workflow
* Modify rust.yaml
* Modify gitlab actions
* Add to CI file
* Add sudo to CI npm install
* Move cargo fmt to own job in tests
* Fix cargo fmt in CI
* Add rustup update before cargo fmt
* Change name of CI job
* Make other CI jobs require cargo fmt
* Add CI badge
* Remove gitlab and travis files
* Add different http timeout for debug
* Update docker file, use makefile in CI
* Use make in the dockerfile, skip the test
* Use the makefile for debug GI test
* Update book
* Tidy grpc and misc things
* Apply discv5 fixes
* Address other minor issues
* Fix warnings
* Attempt fix for addr parsing
* Tidy validator config, CLIs
* Tidy comments
* Tidy signing, reduce ForkService duplication
* Fail if skipping too many slots
* Set default recent genesis time to 0
* Add custom http timeout to validator
* Fix compile bug in node_test_rig
* Remove old bootstrap flag from val CLI
* Update docs
* Tidy val client
* Change val client log levels
* Add comments, more validity checks
* Fix compile error, add comments
* Undo changes to eth2-libp2p/src
* Reduce duplication of keypair generation
* Add more logging for validator duties
* Fix beacon_chain_sim, nitpicks
* Fix compile error, minor nits
* Address Michael's comments
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Clean up some FIXMEs
* Fix a few docs/logs
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Initial commit. web3 api working.
* Tidied up lib. Add function for fetching logs.
* Refactor with `Eth1DataFetcher` trait
* Add parsing for deposit contract logs and get_eth1_data function
* Add `get_eth1_votes` function
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Fix merge issue
* Refactor with `Config` struct. Remote `ContractConfig`
* Rename eth1_chain crate to eth1
* Rename files and read abi file using `fs::read`
* Move eth1 to lib
* Remove unnecessary mutability constraint
* Add `Web3Backend` for returning actual eth1 data
* Refactor `get_eth1_votes` to return a Result
* Delete `eth1_chain` crate
* Return `Result` from `get_deposits`
* Fix range of deposits to return to beacon chain
* Add `get_block_height_by_hash` trait function
* Add naive method for getting `previous_eth1_distance`
* Add eth1 config params to main config
* Add instructions for setting up eth1 testing environment
* Add build script to fetch deposit contract abi
* Contract ABI is part of compiled binary
* Fix minor bugs
* Move docs to lib
* Add timeout to config
* Remove print statements
* Change warn to error
* Fix typos
* Removed prints in test and get timeout value from config
* Fixed error types
* Added logging to web3_fetcher
* Refactor for modified web3 api
* Fix minor stuff
* Add build script
* Tidy, hide eth1 integration tests behind flag
* Add http crate
* Add first stages of eth1_test_rig
* Fix deposits on test rig
* Fix bug with deposit count method
* Add block hash getter to http eth1
* Clean eth1 http crate and tests
* Add script to start ganache
* Adds deposit tree to eth1-http
* Extend deposit tree tests
* Tidy tests in eth1-http
* Add more detail to get block request
* Add block cache to eth1-http
* Rename deposit tree to deposit cache
* Add inital updating to eth1-http
* Tidy updater
* Fix compile bugs in tests
* Adds an Eth1DataCache builder
* Reorg eth1-http files
* Add (failing) tests for eth1 updater
* Rename files, fix bug in eth1-http
* Ensure that ganache timestamps are increasing
* Fix bugs with getting eth1data ancestors
* Improve eth1 testing, fix bugs
* Add truncate method to block cache
* Add pruning to block cache update process
* Add tests for block pruning
* Allow for dropping an expired cache.
* Add more comments
* Add first compiling version of deposit updater
* Add common fn for getting range of required blocks
* Add passing deposit update test
* Improve tests
* Fix block pruning bug
* Add tests for running two updates at once
* Add updater services to eth1
* Add deposit collection to beacon chain
* Add incomplete builder experiments
* Add first working version of beacon chain builder
* Update test harness to new beacon chain type
* Rename builder file, tidy
* Add first working client builder
* Progress further on client builder
* Update becaon node binary to use client builder
* Ensure release tests compile
* Remove old eth1 crate
* Add first pass of new lighthouse binary
* Fix websocket server startup
* Remove old binary code from beacon_node crate
* Add first working beacon node tests
* Add genesis crate, new eth1 cache_2
* Add Serivce to Eth1Cache
* Refactor with general eth1 improvements
* Add passing genesis test
* Tidy, add comments
* Add more comments to eth1 service
* Add further eth1 progress
* Fix some bugs with genesis
* Fix eth1 bugs, make eth1 linking more efficient
* Shift logic in genesis service
* Add more comments to genesis service
* Add gzip, max request values, timeouts to http
* Update testnet parameters to suit goerli testnet
* Add ability to vary Fork, fix custom spec
* Be more explicit about deposit fork version
* Start adding beacon chain eth1 option
* Add more flexibility to prod client
* Further runtime refactoring
* Allow for starting from store
* Add bootstrapping to client config
* Add remote_beacon_node crate
* Update eth1 service for more configurability
* Update eth1 tests to use less runtimes
* Patch issues with tests using too many files
* Move dummy eth1 backend flag
* Ensure all tests pass
* Add ganache-cli to Dockerfile
* Use a special docker hub image for testing
* Appease clippy
* Move validator client into lighthouse binary
* Allow starting with dummy eth1 backend
* Improve logging
* Fix dummy eth1 backend from cli
* Add extra testnet command
* Ensure consistent spec in beacon node
* Update eth1 rig to work on goerli
* Tidy lcli, start adding support for yaml config
* Add incomplete YamlConfig struct
* Remove efforts at YamlConfig
* Add incomplete eth1 voting. Blocked on spec issues
* Add (untested) first pass at eth1 vote algo
* Add tests for winning vote
* Add more tests for eth1 chain
* Add more eth1 voting tests
* Added more eth1 voting testing
* Change test name
* Add more tests to eth1 chain
* Tidy eth1 generics, add more tests
* Improve comments
* Tidy beacon_node tests
* Tidy, rename JsonRpc.. to Caching..
* Tidy voting logic
* Tidy builder docs
* Add comments, tidy eth1
* Add more comments to eth1
* Fix bug with winning_vote
* Add doc comments to the `ClientBuilder`
* Remove commented-out code
* Improve `ClientBuilder` docs
* Add comments to client config
* Add decoding test for `ClientConfig`
* Remove unused `DepositSet` struct
* Tidy `block_cache`
* Remove commented out lines
* Remove unused code in `eth1` crate
* Remove old validator binary `main.rs`
* Tidy, fix tests compile error
* Add initial tests for get_deposits
* Remove dead code in eth1_test_rig
* Update TestingDepositBuilder
* Add testing for getting eth1 deposits
* Fix duplicate rand dep
* Remove dead code
* Remove accidentally-added files
* Fix comment in eth1_genesis_service
* Add .gitignore for eth1_test_rig
* Fix bug in eth1_genesis_service
* Remove dead code from eth2_config
* Fix tabs/spaces in root Cargo.toml
* Tidy eth1 crate
* Allow for re-use of eth1 service after genesis
* Update docs for new CLI
* Change README gif
* Tidy eth1 http module
* Tidy eth1 service
* Tidy environment crate
* Remove unused file
* Tidy, add comments
* Remove commented-out code
* Address majority of Michael's comments
* Address other PR comments
* Add link to issue alongside TODO
* Implement basic tree hash caching
* Use spaces to indent top-level Cargo.toml
* Optimize BLS tree hash by hashing bytes directly
* Implement tree hash caching for validator registry
* Persist BeaconState tree hash cache to disk
* Address Paul's review comments
* Prototype for far_right push
* Add push method and tests
* Modify beacon_chain_builder for interop to use push instead of create
* Add Push method to MerkleTree
* Cargo fmt
* Remove redundant tests
* Fix typo
* Rename push to push_leaf
* Fix clippy warnings
* Add DepthTooSmall enum variant
* Avoid cloning in MerkleTree::push_leaf
* Add quickcheck test for push_leaf
* Cargo fmt updated
* Return err instead of using unwrap()
* Use enumerate instead of hard indexing
* Use if let and return string on error
* Fix typo in deposit_leave
* Fix cargo fmt
* Prototype for far_right push
* Add push method and tests
* Modify beacon_chain_builder for interop to use push instead of create
* Add Push method to MerkleTree
* Cargo fmt
* Remove redundant tests
* Fix typo
* Rename push to push_leaf
* Fix clippy warnings
* Add DepthTooSmall enum variant
* Avoid cloning in MerkleTree::push_leaf
* Add quickcheck test for push_leaf
* Cargo fmt updated
* Return err instead of using unwrap()
* Use enumerate instead of hard indexing
* Use if let and return string on error
* Fix typo in deposit_leave
* Change into_iter to iter
* Fix clippy 'easy' warnings
* Clippy eth2/utils
* Add struct NetworkInfo
* Clippy for types, utils, and beacon_node/store/src/iters.rs
* Cargo fmt
* Change foo to my_foo
* Remove complex signature
* suppress clippy warning for unit_value in benches
* Use enumerate instead of iterating over range
* Allow trivially_copy_pass_by_ref in serde_utils
- A processing error of a validator's block or attestation should not prevent publishing. Now a 202 error is returned, to indicate that it has not been processed, but has still been published.
- Added a publish_attestation function to the API, handling POST requests for /beacon/validator/attestation.
- Removed all unused imports
- Fixed random compiler errors
- Removed all of the 'sucess_response' helpers.
- Enabled all of the API endpoints again, wrapping in 'into_boxfut'
- Tidied up /metrics endpoint
- Added a 'body_text' part to ResponseBuilder, mainly for the Prometheus /metrics endpoint
- Cleaned up the unnecessary helpers::* imports, to be more explicit.
- Wrapped endpoint functions in new into_boxfut function
- Undid changes to Network API service, now returning ApiResult again.
- Cleaning up of functions, and removal of success_response functions in updated endpoints.
- A bunch of other clean-ups.
- Adding try_future! macros where necessary
- Returning ApiResult and mapping it to future instead
- Upgrading POST publish block to return a future directly
- Added SSZ encode for HeadResponse
- Converted all of the /beacon/ endpoints to return BoxFut instead of ApiResult
- Wrapped all of the '?'s in a new macro try_future!()
- Copied the try macro to try_future, so that a boxed future can easily be returned.
- Replaced all of the response serializations to use the new success_response
- Cleaned up imports
- Moved ApiError and such to it's own error.rs
- Obsoleted 'success_response' in favour of new async regular and json only flavours
- Made ApiError work async and be derived from hyper errors
- Added a check to ensure an error is thrown if a non-json encoding is requested on a json-only function
- Made all the individual service functions return futures (only node and network for now)
- Added a /beacon/validators function, to list all validators active in a particular epoch
- Moved 'get_genesis_state' function, to align with router.
- Added content-type for error responses
- Tried adding a cache update call to fix issue getting validator duties (this is WIP)
- Fixed function re-names
- Updated the function which gets the beacon_chain from the request, and makes sure caches are updated.
- Updated this api-alignment branch with the new code from interop branch.
- Made /beacon/state return the current 'head' state when no parameters are provided.
- Added some of the YAML api spec stuff to the /beacon/state endpoint in the rest_api spec.
- Adding the validator routes into the main function.
- Fixing the setting of the aggregation bits, and handling errors correctly.
- Rust format fixes, and addressing compiler warnings.
Updates lighthouse to the latest networking spec
- Sync re-write (#496)
- Updates to the latest eth2 networking spec (#495)
- Libp2p updates and improvements
- Add correct string formatting when incorrect parameters provided.
- Fill /beacon/block and /beacon/block_root endpoints
- Add 500 error responses to endpoints as appropriate
* Add basic block processing benches
* Start reviving state processing benches
* Fix old block builders
* Add optimization for faster pubkey add
* Tidy benches, add another
* Add extra block processing bench
* Start working on faster BLS scheme
* Add partially complete sig verify optimization
* Add .gitignore to state processing
* Add progress on faster signature verification
* Fix SignatureSet for fake_crypto
* Tidy attester slashings sig set
* Tidy bulk signature verifier
* Refactor signature sets to be cleaner
* Start threading SignatureStrategy through code
* Add (empty) test dir
* Move BenchingBlockBuilder
* Add initial block signature verification tests
* Add tests for bulk signature verification
* Start threading SignatureStrategy in block proc.
* Refactor per_block_processing errors
* Use sig set tuples instead of lists of two
* Remove dead code
* Thread VerifySignatures through per_block_processing
* Add bulk signature verification
* Introduce parallel bulk signature verification
* Expand state processing benches
* Fix additional compile errors
* Fix issue where par iter chunks is 0
* Update milagro_bls dep
* Remove debugs, code fragment in beacon chain
* Tidy, add comments to block sig verifier
* Fix various PR comments
* Add block_root option to per_block_processing
* Fix comment in block signature verifier
* Fix comments from PR review
* Remove old comment
* Fix comment
- Added the /beacon/validator/block endpoint for GET (untested)
- Added the /beacon/fork endpoint for GET
- Cleaned up a bunch of unused imports & variables
- Removed '/network/block_discovery' endpoint
- Completed implementation of /beacon/head
- renamed 'latest_finalized_checkpoint' to 'current_finalized_checkpoint' for consistency
- Reorganised list of endpoints in both spec & router so that they match
- Fixed the content-type modifications for /metrics
- Added a new 'RFC' tag to the spec, to tag things that we have not implemented and aren't sure if it's useful.
- Moved 'deposit_contract' under /spec
- Adding some missing fields to structs
- Rearranged the endpoints in the rest_api router, and renamed, using an 'implementation_pending' function
- Added 'content-type' headers, to distinguish difference with /node/metrics
- Updated OpenAPI spec to v0.2.0
- Split /node/fork into /node/chain_id and /beacon/fork
- Moved /metrics to /node/metrics
- Added example to /node/metrics, since it's text/plain
- Moved /node/network to just /network
- Added lots of stubs for endpoints which exist in the router
- Reordered large parts of the OpenAPI spec
- Moved /chain/beacon/... to just /beacon/...