Add git to webapp base container.

Reviewed-on: cerc-io/stack-orchestrator#850

.gitea/workflows/fixturenet-eth-plugeth-arm-test.yml

@@ -0,0 +1,57 @@
+name: Fixturenet-Eth-Plugeth-Arm-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-arm-test'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'
+
+
+jobs:
+  test:
+    name: "Run an Ethereum plugeth fixturenet test"
+    runs-on: ubuntu-latest-arm
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth-plugeth/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/fixturenet-eth-plugeth-test.yml

@@ -6,10 +6,8 @@ on:
     paths:
       - '!**'
       - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'
-
-# Needed until we can incorporate docker startup into the executor container
-env:
-  DOCKER_HOST: unix:///var/run/dind.sock
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'
 
 
 jobs:
@@ -39,9 +37,21 @@ jobs:
         run: ./scripts/create_build_tag_file.sh
       - name: "Build local shiv package"
         run: ./scripts/build_shiv_package.sh
-      - name: Start dockerd # Also needed until we can incorporate into the executor
-        run: |
-          dockerd -H $DOCKER_HOST --userland-proxy=false &
-          sleep 5
       - name: "Run fixturenet-eth tests"
         run: ./tests/fixturenet-eth-plugeth/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/fixturenet-eth-test.yml

@@ -7,10 +7,6 @@ on:
       - '!**'
       - '.gitea/workflows/triggers/fixturenet-eth-test'
 
-# Needed until we can incorporate docker startup into the executor container
-env:
-  DOCKER_HOST: unix:///var/run/dind.sock
-
 
 jobs:
   test:
@@ -39,10 +35,21 @@ jobs:
         run: ./scripts/create_build_tag_file.sh
       - name: "Build local shiv package"
         run: ./scripts/build_shiv_package.sh
-      - name: Start dockerd # Also needed until we can incorporate into the executor
-        run: |
-          dockerd -H $DOCKER_HOST --userland-proxy=false &
-          sleep 5
       - name: "Run fixturenet-eth tests"
         run: ./tests/fixturenet-eth/run-test.sh
-
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/fixturenet-laconicd-test.yml

@@ -6,15 +6,12 @@ on:
     paths:
       - '!**'
       - '.gitea/workflows/triggers/fixturenet-laconicd-test'
-
-# Needed until we can incorporate docker startup into the executor container
-env:
-  DOCKER_HOST: unix:///var/run/dind.sock
-
+  schedule:
+    - cron: '1 13 * * *'
 
 jobs:
   test:
-    name: "Run an Laconicd fixturenet test"
+    name: "Run Laconicd fixturenet and Laconic CLI tests"
     runs-on: ubuntu-latest
     steps:
       - name: 'Update'
@@ -47,9 +44,23 @@ jobs:
         run: ./scripts/create_build_tag_file.sh
       - name: "Build local shiv package"
         run: ./scripts/build_shiv_package.sh
-      - name: Start dockerd # Also needed until we can incorporate into the executor
-        run: |
-          dockerd -H $DOCKER_HOST --userland-proxy=false &
-          sleep 5
       - name: "Run fixturenet-laconicd tests"
         run: ./tests/fixturenet-laconicd/run-test.sh
+      - name: "Run laconic CLI tests"
+        run: ./tests/fixturenet-laconicd/run-cli-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/lint.yml

@@ -0,0 +1,37 @@
+name: Lint Checks
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run linter"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name : "Run flake8"
+        uses: py-actions/flake8@v2
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/publish.yml

@@ -54,3 +54,19 @@ jobs:
           # Hack using endsWith to workaround Gitea sometimes sending "publish-test" vs "refs/heads/publish-test"
           draft: ${{ endsWith('publish-test', github.ref ) }}
           files: ./laconic-so
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/test-container-registry.yml

@@ -0,0 +1,69 @@
+name: Container Registry Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-container-registry'
+      - '.gitea/workflows/test-container-registry.yml'
+      - 'tests/container-registry/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '6 19 * * *'
+
+jobs:
+  test:
+    name: "Run contaier registry hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Install ed" # Only needed until we remove the need to edit the spec file
+        run: apt update && apt install -y ed
+      - name: "Run container registry deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/container-registry/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/test-database.yml

@@ -0,0 +1,67 @@
+name: Database Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-database'
+      - '.gitea/workflows/test-database.yml'
+      - 'tests/database/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '5 18 * * *'
+
+jobs:
+  test:
+    name: "Run database hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run database deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/database/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/test-deploy.yml

@@ -10,9 +10,6 @@ on:
     paths-ignore:
       - '.gitea/workflows/triggers/*'
 
-# Needed until we can incorporate docker startup into the executor container
-env:
-  DOCKER_HOST: unix:///var/run/dind.sock
 
 jobs:
   test:
@@ -41,9 +38,21 @@ jobs:
         run: ./scripts/create_build_tag_file.sh
       - name: "Build local shiv package"
         run: ./scripts/build_shiv_package.sh
-      - name: Start dockerd # Also needed until we can incorporate into the executor
-        run: |
-          dockerd -H $DOCKER_HOST --userland-proxy=false &
-          sleep 5
       - name: "Run deploy tests"
         run: ./tests/deploy/run-deploy-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/test-external-stack.yml

@@ -0,0 +1,58 @@
+name: External Stack Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-external-stack'
+      - '.gitea/workflows/test-external-stack.yml'
+      - 'tests/external-stack/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '8 19 * * *'
+
+jobs:
+  test:
+    name: "Run external stack test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run external stack tests"
+        run: ./tests/external-stack/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/test-k8s-deploy.yml

@@ -0,0 +1,69 @@
+name: K8s Deploy Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-k8s-deploy'
+      - '.gitea/workflows/test-k8s-deploy.yml'
+      - 'tests/k8s-deploy/run-deploy-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '3 15 * * *'
+
+jobs:
+  test:
+    name: "Run deploy test suite on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run k8s deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/k8s-deploy/run-deploy-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/test-webapp.yml

@@ -0,0 +1,59 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches:
+      - main
+      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Install wget" # 20240109 - Only needed until the executors are updated.
+        run: apt update && apt install -y wget
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/test.yml

@@ -10,9 +10,6 @@ on:
     paths-ignore:
       - '.gitea/workflows/triggers/*'
 
-# Needed until we can incorporate docker startup into the executor container
-env:
-  DOCKER_HOST: unix:///var/run/dind.sock
 
 jobs:
   test:
@@ -41,11 +38,21 @@ jobs:
         run: ./scripts/create_build_tag_file.sh
       - name: "Build local shiv package"
         run: ./scripts/build_shiv_package.sh
-      - name: Start dockerd # Also needed until we can incorporate into the executor
-        run: |
-          dockerd -H $DOCKER_HOST --userland-proxy=false &
-          sleep 5
       - name: "Run smoke tests"
         run: ./tests/smoke-test/run-smoke-test.sh
-
-
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/triggers/fixturenet-eth-plugeth-arm-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-plugeth-arm-test CI job
+

.gitea/workflows/triggers/fixturenet-eth-plugeth-test

@@ -1,2 +1,3 @@
 Change this file to trigger running the fixturenet-eth-plugeth-test CI job
 trigger
+trigger

.gitea/workflows/triggers/fixturenet-laconicd-test

@@ -1,2 +1,7 @@
 Change this file to trigger running the fixturenet-laconicd-test CI job
-
+Trigger
+Trigger
+Trigger
+Trigger
+Trigger
+Trigger

.gitea/workflows/triggers/test-container-registry

@@ -0,0 +1 @@
+Change this file to trigger running the test-container-registry CI job

.gitea/workflows/triggers/test-database

@@ -0,0 +1,2 @@
+Change this file to trigger running the test-database CI job
+Trigger test run

.gitea/workflows/triggers/test-external-stack

@@ -0,0 +1,2 @@
+Change this file to trigger running the external-stack CI job
+trigger

.gitea/workflows/triggers/test-k8s-deploy

@@ -0,0 +1,2 @@
+Change this file to trigger running the test-k8s-deploy CI job
+Trigger test on PR branch

.github/workflows/fixturenet-laconicd.yml

@@ -12,12 +12,6 @@ jobs:
     name: "Run fixturenet-laconicd test suite"
     runs-on: ubuntu-latest
     steps:
-      - name: 'Setup jq'
-        run: apt-get install jq -y
-      - name: 'Check jq'
-        run: |
-          which jq
-          jq --version 
       - name: "Clone project repository"
         uses: actions/checkout@v3
       - name: "Install Python"

.github/workflows/test-webapp.yml

@@ -0,0 +1,29 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh

.gitignore

@@ -6,5 +6,5 @@ laconic_stack_orchestrator.egg-info
 __pycache__
 *~
 package
-app/data/build_tag.txt
+stack_orchestrator/data/build_tag.txt
 /build

README.md

@@ -29,10 +29,10 @@ chmod +x ~/.docker/cli-plugins/docker-compose
 Next decide on a directory where you would like to put the stack-orchestrator program. Typically this would be 
 a "user" binary directory such as `~/bin` or perhaps `/usr/local/laconic` or possibly just the current working directory.
 
-Now, having selected that directory, download the latest release from [this page](https://github.com/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
+Now, having selected that directory, download the latest release from [this page](https://git.vdb.to/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
 
 ```bash
-curl -L -o ~/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+curl -L -o ~/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 ```
 
 Give it execute permissions:
@@ -52,7 +52,7 @@ Version: 1.1.0-7a607c2-202304260513
 Save the distribution url to `~/.laconic-so/config.yml`:
 ```bash
 mkdir ~/.laconic-so
-echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml
+echo "distribution-url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so" >  ~/.laconic-so/config.yml
 ```
 
 ### Update
@@ -64,12 +64,12 @@ laconic-so update
 
 ## Usage
 
-The various [stacks](/app/data/stacks) each contain instructions for running different stacks based on your use case. For example:
+The various [stacks](/stack_orchestrator/data/stacks) each contain instructions for running different stacks based on your use case. For example:
 
-- [self-hosted Gitea](/app/data/stacks/build-support)
-- [an Optimism Fixturenet](/app/data/stacks/fixturenet-optimism)
-- [laconicd with console and CLI](app/data/stacks/fixturenet-laconic-loaded)
-- [kubo (IPFS)](app/data/stacks/kubo)
+- [self-hosted Gitea](/stack_orchestrator/data/stacks/build-support)
+- [an Optimism Fixturenet](/stack_orchestrator/data/stacks/fixturenet-optimism)
+- [laconicd with console and CLI](stack_orchestrator/data/stacks/fixturenet-laconic-loaded)
+- [kubo (IPFS)](stack_orchestrator/data/stacks/kubo)
 
 ## Contributing
 

app/build/build_containers.py

@@ -1,143 +0,0 @@
-# Copyright © 2022, 2023 Vulcanize
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-# Builds or pulls containers for the system components
-
-# env vars:
-# CERC_REPO_BASE_DIR defaults to ~/cerc
-
-# TODO: display the available list of containers; allow re-build of either all or specific containers
-
-import os
-import sys
-from decouple import config
-import subprocess
-import click
-import importlib.resources
-from pathlib import Path
-from app.util import include_exclude_check, get_parsed_stack_config
-from app.base import get_npm_registry_url
-
-# TODO: find a place for this
-#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
-
-
-@click.command()
-@click.option('--include', help="only build these containers")
-@click.option('--exclude', help="don\'t build these containers")
-@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
-@click.option("--extra-build-args", help="Supply extra arguments to build")
-@click.pass_context
-def command(ctx, include, exclude, force_rebuild, extra_build_args):
-    '''build the set of containers required for a complete stack'''
-
-    quiet = ctx.obj.quiet
-    verbose = ctx.obj.verbose
-    dry_run = ctx.obj.dry_run
-    debug = ctx.obj.debug
-    local_stack = ctx.obj.local_stack
-    stack = ctx.obj.stack
-    continue_on_error = ctx.obj.continue_on_error
-
-    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
-
-    if local_stack:
-        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
-    else:
-        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
-
-    if not quiet:
-        print(f'Dev Root is: {dev_root_path}')
-
-    if not os.path.isdir(dev_root_path):
-        print('Dev root directory doesn\'t exist, creating')
-
-    # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
-    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
-        all_containers = container_list_file.read().splitlines()
-
-    containers_in_scope = []
-    if stack:
-        stack_config = get_parsed_stack_config(stack)
-        containers_in_scope = stack_config['containers']
-    else:
-        containers_in_scope = all_containers
-
-    if verbose:
-        print(f'Containers: {containers_in_scope}')
-        if stack:
-            print(f"Stack: {stack}")
-
-    # TODO: make this configurable
-    container_build_env = {
-        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
-        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
-        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
-        "CERC_REPO_BASE_DIR": dev_root_path,
-        "CERC_CONTAINER_BASE_DIR": container_build_dir,
-        "CERC_HOST_UID": f"{os.getuid()}",
-        "CERC_HOST_GID": f"{os.getgid()}",
-        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
-    }
-    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
-    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
-    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
-    docker_host_env = os.getenv("DOCKER_HOST")
-    if docker_host_env:
-        container_build_env.update({"DOCKER_HOST": docker_host_env})
-
-    def process_container(container):
-        if not quiet:
-            print(f"Building: {container}")
-        build_dir = os.path.join(container_build_dir, container.replace("/", "-"))
-        build_script_filename = os.path.join(build_dir, "build.sh")
-        if verbose:
-            print(f"Build script filename: {build_script_filename}")
-        if os.path.exists(build_script_filename):
-            build_command = build_script_filename
-        else:
-            if verbose:
-                print(f"No script file found: {build_script_filename}, using default build script")
-            repo_dir = container.split('/')[1]
-            # TODO: make this less of a hack -- should be specified in some metadata somewhere
-            # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
-            repo_full_path = os.path.join(dev_root_path, repo_dir)
-            repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
-            build_command = os.path.join(container_build_dir, "default-build.sh") + f" {container}:local {repo_dir_or_build_dir}"
-        if not dry_run:
-            if verbose:
-                print(f"Executing: {build_command} with environment: {container_build_env}")
-            build_result = subprocess.run(build_command, shell=True, env=container_build_env)
-            if verbose:
-                print(f"Return code is: {build_result.returncode}")
-            if build_result.returncode != 0:
-                print(f"Error running build for {container}")
-                if not continue_on_error:
-                    print("FATAL Error: container build failed and --continue-on-error not set, exiting")
-                    sys.exit(1)
-                else:
-                    print("****** Container Build Error, continuing because --continue-on-error is set")
-        else:
-            print("Skipped")
-
-    for container in containers_in_scope:
-        if include_exclude_check(container, include, exclude):
-            process_container(container)
-        else:
-            if verbose:
-                print(f"Excluding: {container}")

app/data/compose/docker-compose-kubo.yml

@@ -1,13 +0,0 @@
-version: "3.2"
-# See: https://docs.ipfs.tech/install/run-ipfs-inside-docker/#set-up
-services:
-  ipfs:
-    image: ipfs/kubo:master-2023-02-20-714a968
-    restart: always
-    volumes:
-      - ./ipfs/import:/import
-      - ./ipfs/data:/data/ipfs
-    ports:
-      - "0.0.0.0:8080:8080"
-      - "0.0.0.0:4001:4001"
-      - "0.0.0.0:5001:5001"

app/data/compose/docker-compose-test.yml

@@ -1,14 +0,0 @@
-services:
-  test:
-    image: cerc/test-container:local
-    restart: always
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_TEST_PARAM_1: ${CERC_TEST_PARAM_1:-FAILED}
-    volumes:
-      - test-data:/data
-    ports:
-      - "80"
-
-volumes:
-  test-data:

app/data/compose/docker-compose-watcher-azimuth.yml

@@ -1,304 +0,0 @@
-version: '3.2'
-
-services:
-  # Starts the PostgreSQL database for watchers
-  watcher-db:
-    restart: unless-stopped
-    image: postgres:14-alpine
-    environment:
-      - POSTGRES_USER=vdbm
-      - POSTGRES_MULTIPLE_DATABASES=azimuth-watcher,azimuth-watcher-job-queue,censures-watcher,censures-watcher-job-queue,claims-watcher,claims-watcher-job-queue,conditional-star-release-watcher,conditional-star-release-watcher-job-queue,delegated-sending-watcher,delegated-sending-watcher-job-queue,ecliptic-watcher,ecliptic-watcher-job-queue,linear-star-release-watcher,linear-star-release-watcher-job-queue,polls-watcher,polls-watcher-job-queue
-      - POSTGRES_EXTENSION=azimuth-watcher-job-queue:pgcrypto,censures-watcher-job-queue:pgcrypto,claims-watcher-job-queue:pgcrypto,conditional-star-release-watcher-job-queue:pgcrypto,delegated-sending-watcher-job-queue:pgcrypto,ecliptic-watcher-job-queue:pgcrypto,linear-star-release-watcher-job-queue:pgcrypto,polls-watcher-job-queue:pgcrypto,
-      - POSTGRES_PASSWORD=password
-    volumes:
-      - ../config/postgresql/multiple-postgressql-databases.sh:/docker-entrypoint-initdb.d/multiple-postgressql-databases.sh
-      - watcher_db_data:/var/lib/postgresql/data
-    ports:
-      - "0.0.0.0:15432:5432"
-    healthcheck:
-      test: ["CMD", "nc", "-v", "localhost", "5432"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 10s
-
-  # Starts the azimuth-watcher server
-  azimuth-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/azimuth-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/azimuth-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/azimuth-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/azimuth-watcher/start-server.sh
-    ports:
-      - "3001"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3001"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the censures-watcher server
-  censures-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/censures-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/censures-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/censures-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/censures-watcher/start-server.sh
-    ports:
-      - "3002"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3002"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the claims-watcher server
-  claims-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/claims-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/claims-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/claims-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/claims-watcher/start-server.sh
-    ports:
-      - "3003"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3003"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the conditional-star-release-watcher server
-  conditional-star-release-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/conditional-star-release-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/conditional-star-release-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/conditional-star-release-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/conditional-star-release-watcher/start-server.sh
-    ports:
-      - "3004"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3004"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the delegated-sending-watcher server
-  delegated-sending-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/delegated-sending-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/delegated-sending-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/delegated-sending-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/delegated-sending-watcher/start-server.sh
-    ports:
-      - "3005"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3005"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the ecliptic-watcher server
-  ecliptic-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/ecliptic-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/ecliptic-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/ecliptic-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/ecliptic-watcher/start-server.sh
-    ports:
-      - "3006"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3006"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the linear-star-release-watcher server
-  linear-star-release-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/linear-star-release-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/linear-star-release-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/linear-star-release-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/linear-star-release-watcher/start-server.sh
-    ports:
-      - "3007"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3007"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the polls-watcher server
-  polls-watcher-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    env_file:
-      - ../config/watcher-azimuth/watcher-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-    working_dir: /app/packages/polls-watcher
-    command: "./start-server.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/polls-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/polls-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-server.sh:/app/packages/polls-watcher/start-server.sh
-    ports:
-      - "3008"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "3008"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Starts the gateway-server for proxying queries
-  gateway-server:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      azimuth-watcher-server:
-        condition: service_healthy
-      censures-watcher-server:
-        condition: service_healthy
-      claims-watcher-server:
-        condition: service_healthy
-      conditional-star-release-watcher-server:
-        condition: service_healthy
-      delegated-sending-watcher-server:
-        condition: service_healthy
-      ecliptic-watcher-server:
-        condition: service_healthy
-      linear-star-release-watcher-server:
-        condition: service_healthy
-      polls-watcher-server:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-    working_dir: /app/packages/gateway-server
-    command: "yarn server"
-    volumes:
-      - ../config/watcher-azimuth/gateway-watchers.json:/app/packages/gateway-server/dist/watchers.json
-    ports:
-      - "0.0.0.0:4000:4000"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "4000"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-volumes:
-  watcher_db_data:

app/data/config/fixturenet-laconicd/create-fixturenet.sh

@@ -1,118 +0,0 @@
-#!/bin/bash
-
-# TODO: this file is now an unmodified copy of cerc-io/laconicd/init.sh
-# so we should have a mechanism to bundle it inside the container rather than link from here
-# at deploy time.
-
-KEY="mykey"
-CHAINID="laconic_9000-1"
-MONIKER="localtestnet"
-KEYRING="test"
-KEYALGO="eth_secp256k1"
-LOGLEVEL="info"
-# trace evm
-TRACE="--trace"
-# TRACE=""
-
-# validate dependencies are installed
-command -v jq > /dev/null 2>&1 || { echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"; exit 1; }
-
-# remove existing daemon and client
-rm -rf ~/.laconic*
-
-make install
-
-laconicd config keyring-backend $KEYRING
-laconicd config chain-id $CHAINID
-
-# if $KEY exists it should be deleted
-laconicd keys add $KEY --keyring-backend $KEYRING --algo $KEYALGO
-
-# Set moniker and chain-id for Ethermint (Moniker can be anything, chain-id must be an integer)
-laconicd init $MONIKER --chain-id $CHAINID
-
-# Change parameter token denominations to aphoton
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["staking"]["params"]["bond_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["crisis"]["constant_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["gov"]["deposit_params"]["min_deposit"][0]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["mint"]["params"]["mint_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-# Custom modules
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commit_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveal_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_minimum_bid"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-if [[ "$TEST_REGISTRY_EXPIRY" == "true" ]]; then
-  echo "Setting timers for expiry tests."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-if [[ "$TEST_AUCTION_ENABLED" == "true" ]]; then
-  echo "Enabling auction and setting timers."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_enabled"]=true' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="300s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-# increase block time (?)
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["time_iota_ms"]="1000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# Set gas limit in genesis
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["max_gas"]="10000000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# disable produce empty block
-if [[ "$OSTYPE" == "darwin"* ]]; then
-    sed -i '' 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-  else
-    sed -i 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-fi
-
-if [[ $1 == "pending" ]]; then
-  if [[ "$OSTYPE" == "darwin"* ]]; then
-      sed -i '' 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  else
-      sed -i 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  fi
-fi
-
-# Allocate genesis accounts (cosmos formatted addresses)
-laconicd add-genesis-account $KEY 100000000000000000000000000aphoton --keyring-backend $KEYRING
-
-# Sign genesis transaction
-laconicd gentx $KEY 1000000000000000000000aphoton --keyring-backend $KEYRING --chain-id $CHAINID
-
-# Collect genesis tx
-laconicd collect-gentxs
-
-# Run this to ensure everything worked and that the genesis file is setup correctly
-laconicd validate-genesis
-
-if [[ $1 == "pending" ]]; then
-  echo "pending mode is on, please wait for the first block committed."
-fi
-
-# Start the node (remove the --pruning=nothing flag if historical queries are not needed)
-laconicd start --pruning=nothing --evm.tracer=json $TRACE --log_level $LOGLEVEL --minimum-gas-prices=0.0001aphoton --json-rpc.api eth,txpool,personal,net,debug,web3,miner --api.enable --gql-server --gql-playground

app/data/config/fixturenet-optimism/generate-l2-config.sh

@@ -1,37 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Check existing config if it exists
-if [ -f /app/jwt.txt ] && [ -f /app/rollup.json ]; then
-  echo "Found existing L2 config, cross-checking with L1 deployment config"
-
-  SOURCE_L1_CONF=$(cat /contracts-bedrock/deploy-config/getting-started.json)
-  EXP_L1_BLOCKHASH=$(echo "$SOURCE_L1_CONF" | jq -r '.l1StartingBlockTag')
-  EXP_BATCHER=$(echo "$SOURCE_L1_CONF" | jq -r '.batchSenderAddress')
-
-  GEN_L2_CONF=$(cat /app/rollup.json)
-  GEN_L1_BLOCKHASH=$(echo "$GEN_L2_CONF" | jq -r '.genesis.l1.hash')
-  GEN_BATCHER=$(echo "$GEN_L2_CONF" | jq -r '.genesis.system_config.batcherAddr')
-
-  if [ "$EXP_L1_BLOCKHASH" = "$GEN_L1_BLOCKHASH" ] && [ "$EXP_BATCHER" = "$GEN_BATCHER" ]; then
-    echo "Config cross-checked, exiting"
-    exit 0
-  fi
-
-  echo "Existing L2 config doesn't match the L1 deployment config, please clear L2 config volume before starting"
-  exit 1
-fi
-
-op-node genesis l2 \
-  --deploy-config /contracts-bedrock/deploy-config/getting-started.json \
-  --deployment-dir /contracts-bedrock/deployments/getting-started/ \
-  --outfile.l2 /app/genesis.json \
-  --outfile.rollup /app/rollup.json \
-  --l1-rpc $CERC_L1_RPC
-
-openssl rand -hex 32 > /app/jwt.txt

app/data/config/fixturenet-optimism/optimism-contracts/run.sh

@@ -1,131 +0,0 @@
-#!/bin/bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_CHAIN_ID="${CERC_L1_CHAIN_ID:-${DEFAULT_CERC_L1_CHAIN_ID}}"
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-CERC_L1_ACCOUNTS_CSV_URL="${CERC_L1_ACCOUNTS_CSV_URL:-${DEFAULT_CERC_L1_ACCOUNTS_CSV_URL}}"
-
-echo "Using L1 RPC endpoint ${CERC_L1_RPC}"
-
-IMPORT_1="import './verify-contract-deployment'"
-IMPORT_2="import './rekey-json'"
-IMPORT_3="import './send-balance'"
-
-# Append mounted tasks to tasks/index.ts file if not present
-if ! grep -Fxq "$IMPORT_1" tasks/index.ts; then
-  echo "$IMPORT_1" >> tasks/index.ts
-  echo "$IMPORT_2" >> tasks/index.ts
-  echo "$IMPORT_3" >> tasks/index.ts
-fi
-
-# Update the chainId in the hardhat config
-sed -i "/getting-started/ {n; s/.*chainId.*/      chainId: $CERC_L1_CHAIN_ID,/}" hardhat.config.ts
-
-# Exit if a deployment already exists (on restarts)
-# Note: fixturenet-eth-geth currently starts fresh on a restart
-if [ -d "deployments/getting-started" ]; then
-  echo "Deployment directory deployments/getting-started found, checking SystemDictator deployment"
-
-  # Read JSON file into variable
-  SYSTEM_DICTATOR_DETAILS=$(cat deployments/getting-started/SystemDictator.json)
-
-  # Parse JSON into variables
-  SYSTEM_DICTATOR_ADDRESS=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.address')
-  SYSTEM_DICTATOR_TXHASH=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.transactionHash')
-
-  if yarn hardhat verify-contract-deployment --contract "${SYSTEM_DICTATOR_ADDRESS}" --transaction-hash "${SYSTEM_DICTATOR_TXHASH}"; then
-    echo "Deployment verfication successful, exiting"
-    exit 0
-  else
-    echo "Deployment verfication failed, please clear L1 deployment volume before starting"
-    exit 1
-  fi
-fi
-
-# Generate the L2 account addresses
-yarn hardhat rekey-json --output /l2-accounts/keys.json
-
-# Read JSON file into variable
-KEYS_JSON=$(cat /l2-accounts/keys.json)
-
-# Parse JSON into variables
-ADMIN_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Admin.address')
-ADMIN_PRIV_KEY=$(echo "$KEYS_JSON" | jq -r '.Admin.privateKey')
-PROPOSER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Proposer.address')
-BATCHER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Batcher.address')
-SEQUENCER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Sequencer.address')
-
-# Get the private keys of L1 accounts
-if [ -n "$CERC_L1_ACCOUNTS_CSV_URL" ] && \
-  l1_accounts_response=$(curl -L --write-out '%{http_code}' --silent --output /dev/null "$CERC_L1_ACCOUNTS_CSV_URL") && \
-  [ "$l1_accounts_response" -eq 200 ];
-then
-  echo "Fetching L1 account credentials using provided URL"
-  mkdir -p /geth-accounts
-  wget -O /geth-accounts/accounts.csv "$CERC_L1_ACCOUNTS_CSV_URL"
-
-  CERC_L1_ADDRESS=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 2)
-  CERC_L1_PRIV_KEY=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
-  CERC_L1_ADDRESS_2=$(awk -F, 'NR==2{print $(NF-1)}' /geth-accounts/accounts.csv)
-  CERC_L1_PRIV_KEY_2=$(awk -F, 'NR==2{print $NF}' /geth-accounts/accounts.csv)
-else
-  echo "Couldn't fetch L1 account credentials, using them from env"
-fi
-
-# Send balances to the above L2 addresses
-yarn hardhat send-balance --to "${ADMIN_ADDRESS}" --amount 2 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${PROPOSER_ADDRESS}" --amount 5 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${BATCHER_ADDRESS}" --amount 1000 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-
-echo "Balances sent to L2 accounts"
-
-# Select a finalized L1 block as the starting point for roll ups
-until FINALIZED_BLOCK=$(cast block finalized --rpc-url "$CERC_L1_RPC"); do
-    echo "Waiting for a finalized L1 block to exist, retrying after 10s"
-    sleep 10
-done
-
-L1_BLOCKNUMBER=$(echo "$FINALIZED_BLOCK" | awk '/number/{print $2}')
-L1_BLOCKHASH=$(echo "$FINALIZED_BLOCK" | awk '/hash/{print $2}')
-L1_BLOCKTIMESTAMP=$(echo "$FINALIZED_BLOCK" | awk '/timestamp/{print $2}')
-
-echo "Selected L1 block ${L1_BLOCKNUMBER} as the starting block for roll ups"
-
-# Update the deployment config
-sed -i 's/"l2OutputOracleStartingTimestamp": TIMESTAMP/"l2OutputOracleStartingTimestamp": '"$L1_BLOCKTIMESTAMP"'/g' deploy-config/getting-started.json
-jq --arg chainid "$CERC_L1_CHAIN_ID" '.l1ChainID = ($chainid | tonumber)' deploy-config/getting-started.json > tmp.json && mv tmp.json deploy-config/getting-started.json
-
-node update-config.js deploy-config/getting-started.json "$ADMIN_ADDRESS" "$PROPOSER_ADDRESS" "$BATCHER_ADDRESS" "$SEQUENCER_ADDRESS" "$L1_BLOCKHASH"
-
-echo "Updated the deployment config"
-
-# Create a .env file
-echo "L1_RPC=$CERC_L1_RPC" > .env
-echo "PRIVATE_KEY_DEPLOYER=$ADMIN_PRIV_KEY" >> .env
-
-echo "Deploying the L1 smart contracts, this will take a while..."
-
-# Deploy the L1 smart contracts
-yarn hardhat deploy --network getting-started --tags l1
-
-echo "Deployed the L1 smart contracts"
-
-# Read Proxy contract's JSON and get the address
-PROXY_JSON=$(cat deployments/getting-started/Proxy__OVM_L1StandardBridge.json)
-PROXY_ADDRESS=$(echo "$PROXY_JSON" | jq -r '.address')
-
-# Send balance to the above Proxy contract in L1 for reflecting balance in L2
-# First account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-# Second account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY_2}" --network getting-started
-
-echo "Balance sent to Proxy L2 contract"
-echo "Use following accounts for transactions in L2:"
-echo "${CERC_L1_ADDRESS}"
-echo "${CERC_L1_ADDRESS_2}"
-echo "Done"

app/data/config/fixturenet-optimism/optimism-contracts/update-config.js

@@ -1,36 +0,0 @@
-const fs = require('fs')
-
-// Get the command-line argument
-const configFile = process.argv[2]
-const adminAddress = process.argv[3]
-const proposerAddress = process.argv[4]
-const batcherAddress = process.argv[5]
-const sequencerAddress = process.argv[6]
-const blockHash = process.argv[7]
-
-// Read the JSON file
-const configData = fs.readFileSync(configFile)
-const configObj = JSON.parse(configData)
-
-// Update the finalSystemOwner property with the ADMIN_ADDRESS value
-configObj.finalSystemOwner =
-  configObj.portalGuardian =
-  configObj.controller =
-  configObj.l2OutputOracleChallenger =
-  configObj.proxyAdminOwner =
-  configObj.baseFeeVaultRecipient =
-  configObj.l1FeeVaultRecipient =
-  configObj.sequencerFeeVaultRecipient =
-  configObj.governanceTokenOwner =
-    adminAddress
-
-configObj.l2OutputOracleProposer = proposerAddress
-
-configObj.batchSenderAddress = batcherAddress
-
-configObj.p2pSequencerAddress = sequencerAddress
-
-configObj.l1StartingBlockTag = blockHash
-
-// Write the updated JSON object back to the file
-fs.writeFileSync(configFile, JSON.stringify(configObj, null, 2))

app/data/config/fixturenet-optimism/run-op-geth.sh

@@ -1,90 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-# TODO: Add in container build or use other tool
-echo "Installing jq"
-apk update && apk add jq
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Initialize op-geth if datadir/geth not found
-if [ -f /op-node/jwt.txt ] && [ -d datadir/geth ]; then
-  echo "Found existing datadir, checking block signer key"
-
-  BLOCK_SIGNER_KEY=$(cat datadir/block-signer-key)
-
-  if [ "$SEQUENCER_KEY" = "$BLOCK_SIGNER_KEY" ]; then
-    echo "Sequencer and block signer keys match, skipping initialization"
-  else
-    echo "Sequencer and block signer keys don't match, please clear L2 geth data volume before starting"
-    exit 1
-  fi
-else
-  echo "Initializing op-geth"
-
-  mkdir -p datadir
-  echo "pwd" > datadir/password
-  echo $SEQUENCER_KEY > datadir/block-signer-key
-
-  geth account import --datadir=datadir --password=datadir/password datadir/block-signer-key
-
-  while [ ! -f "/op-node/jwt.txt" ]
-  do
-    echo "Config files not created. Checking after 5 seconds."
-    sleep 5
-  done
-
-  echo "Config files created by op-node, proceeding with the initialization..."
-
-  geth init --datadir=datadir /op-node/genesis.json
-  echo "Node Initialized"
-fi
-
-SEQUENCER_ADDRESS=$(jq -r '.Sequencer.address' /l2-accounts/keys.json | tr -d '"')
-echo "SEQUENCER_ADDRESS: ${SEQUENCER_ADDRESS}"
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${geth_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-geth
-geth \
-  --datadir ./datadir \
-  --http \
-  --http.corsdomain="*" \
-  --http.vhosts="*" \
-  --http.addr=0.0.0.0 \
-  --http.api=web3,debug,eth,txpool,net,engine \
-  --ws \
-  --ws.addr=0.0.0.0 \
-  --ws.port=8546 \
-  --ws.origins="*" \
-  --ws.api=debug,eth,txpool,net,engine \
-  --syncmode=full \
-  --gcmode=archive \
-  --nodiscover \
-  --maxpeers=0 \
-  --networkid=42069 \
-  --authrpc.vhosts="*" \
-  --authrpc.addr=0.0.0.0 \
-  --authrpc.port=8551 \
-  --authrpc.jwtsecret=/op-node/jwt.txt \
-  --rollup.disabletxpoolgossip=true \
-  --password=./datadir/password \
-  --allow-insecure-unlock \
-  --mine \
-  --miner.etherbase=$SEQUENCER_ADDRESS \
-  --unlock=$SEQUENCER_ADDRESS \
-  &
-
-geth_pid=$!
-wait $geth_pid

app/data/config/fixturenet-optimism/run-op-node.sh

@@ -1,26 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Run op-node
-op-node \
-  --l2=http://op-geth:8551 \
-  --l2.jwt-secret=/op-node-data/jwt.txt \
-  --sequencer.enabled \
-  --sequencer.l1-confs=3 \
-  --verifier.l1-confs=3 \
-  --rollup.config=/op-node-data/rollup.json \
-  --rpc.addr=0.0.0.0 \
-  --rpc.port=8547 \
-  --p2p.disable \
-  --rpc.enable-admin \
-  --p2p.sequencer.key=$SEQUENCER_KEY \
-  --l1=$CERC_L1_RPC \
-  --l1.rpckind=any

app/data/config/fixturenet-optimism/run-op-proposer.sh

@@ -1,36 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Read the L2OutputOracle contract address from the deployment
-L2OO_DEPLOYMENT=$(cat /contracts-bedrock/deployments/getting-started/L2OutputOracle.json)
-L2OO_ADDR=$(echo "$L2OO_DEPLOYMENT" | jq -r '.address')
-
-# Get Proposer key from keys.json
-PROPOSER_KEY=$(jq -r '.Proposer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${proposer_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-proposer
-op-proposer \
-  --poll-interval 12s \
-  --rpc.port 8560 \
-  --rollup-rpc http://op-node:8547 \
-  --l2oo-address $L2OO_ADDR \
-  --private-key $PROPOSER_KEY \
-  --l1-eth-rpc $CERC_L1_RPC \
-  &
-
-proposer_pid=$!
-wait $proposer_pid

app/data/config/watcher-azimuth/start-server.sh

@@ -1,27 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_IPLD_ETH_RPC="${CERC_IPLD_ETH_RPC:-${DEFAULT_CERC_IPLD_ETH_RPC}}"
-CERC_IPLD_ETH_GQL="${CERC_IPLD_ETH_GQL:-${DEFAULT_CERC_IPLD_ETH_GQL}}"
-
-echo "Using IPLD ETH RPC endpoint ${CERC_IPLD_ETH_RPC}"
-echo "Using IPLD GQL endpoint ${CERC_IPLD_ETH_GQL}"
-
-# Replace env variables in template TOML file
-# Read in the config template TOML file and modify it
-WATCHER_CONFIG_TEMPLATE=$(cat environments/watcher-config-template.toml)
-WATCHER_CONFIG=$(echo "$WATCHER_CONFIG_TEMPLATE" | \
-  sed -E "s|REPLACE_WITH_CERC_IPLD_ETH_RPC|${CERC_IPLD_ETH_RPC}|g; \
-          s|REPLACE_WITH_CERC_IPLD_ETH_GQL|${CERC_IPLD_ETH_GQL}| ")
-
-# Write the modified content to a new file
-echo "$WATCHER_CONFIG" > environments/watcher-config.toml
-
-# Merge SO watcher config with existing config file
-node merge-toml.js
-
-echo 'yarn server'
-yarn server

app/data/config/watcher-azimuth/watcher-config-template.toml

@@ -1,14 +0,0 @@
-[server]
-  host = "0.0.0.0"
-  maxSimultaneousRequests = -1
-
-[database]
-  host = "watcher-db"
-  port = 5432
-  username = "vdbm"
-  password = "password"
-
-[upstream]
-  [upstream.ethServer]
-    gqlApiEndpoint = "REPLACE_WITH_CERC_IPLD_ETH_GQL"
-    rpcProviderEndpoint = "REPLACE_WITH_CERC_IPLD_ETH_RPC"

app/data/config/watcher-azimuth/watcher-params.env

@@ -1,5 +0,0 @@
-# Defaults
-
-# ipld-eth-server endpoints
-DEFAULT_CERC_IPLD_ETH_RPC=
-DEFAULT_CERC_IPLD_ETH_GQL=

app/data/container-build/cerc-fixturenet-eth-genesis/Dockerfile

@@ -1,27 +0,0 @@
-FROM skylenet/ethereum-genesis-generator@sha256:210353ce7c898686bc5092f16c61220a76d357f51eff9c451e9ad1b9ad03d4d3 AS ethgen
-
-FROM golang:1.20-alpine as builder
-
-RUN apk add --no-cache python3 py3-pip
-
-COPY genesis /opt/genesis
-
-# Install ethereum-genesis-generator tools
-COPY --from=ethgen /usr/local/bin/eth2-testnet-genesis /usr/local/bin/
-COPY --from=ethgen /usr/local/bin/eth2-val-tools /usr/local/bin/
-COPY --from=ethgen /apps /apps
-RUN cd /apps/el-gen && pip3 install -r requirements.txt
-# web3==5.24.0 used by el-gen is broken on python 3.11
-RUN pip3 install --upgrade "web3==6.5.0"
-
-# Build genesis config
-RUN apk add --no-cache make bash envsubst jq
-RUN cd /opt/genesis && make genesis-el
-
-# Snag the genesis block info.
-RUN go install github.com/cerc-io/eth-dump-genblock@latest
-RUN eth-dump-genblock /opt/genesis/build/el/geth.json > /opt/genesis/build/el/genesis_block.json
-
-FROM alpine:latest
-
-COPY --from=builder /opt/genesis /opt/genesis

app/data/container-build/cerc-fixturenet-eth-genesis/genesis/el/build_el.sh

@@ -1,40 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# See: https://github.com/skylenet/ethereum-genesis-generator/blob/master/entrypoint.sh
-
-rm -rf ../build/el
-mkdir -p ../build/el
-
-tmp_dir=$(mktemp -d -t ci-XXXXXXXXXX)
-envsubst < el-config.yaml > $tmp_dir/genesis-config.yaml
-
-ttd=`cat $tmp_dir/genesis-config.yaml | grep terminal_total_difficulty | awk '{ print $2 }'`
-homestead_block=`cat $tmp_dir/genesis-config.yaml | grep homestead_block | awk '{ print $2 }'`
-eip150_block=`cat $tmp_dir/genesis-config.yaml | grep eip150_block | awk '{ print $2 }'`
-eip155_block=`cat $tmp_dir/genesis-config.yaml | grep eip155_block | awk '{ print $2 }'`
-eip158_block=`cat $tmp_dir/genesis-config.yaml | grep eip158_block | awk '{ print $2 }'`
-byzantium_block=`cat $tmp_dir/genesis-config.yaml | grep byzantium_block | awk '{ print $2 }'`
-constantinople_block=`cat $tmp_dir/genesis-config.yaml | grep constantinople_block | awk '{ print $2 }'`
-petersburg_block=`cat $tmp_dir/genesis-config.yaml | grep petersburg_block | awk '{ print $2 }'`
-istanbul_block=`cat $tmp_dir/genesis-config.yaml | grep istanbul_block | awk '{ print $2 }'`
-berlin_block=`cat $tmp_dir/genesis-config.yaml | grep berlin_block | awk '{ print $2 }'`
-london_block=`cat $tmp_dir/genesis-config.yaml | grep london_block | awk '{ print $2 }'`
-merge_fork_block=`cat $tmp_dir/genesis-config.yaml | grep merge_fork_block | awk '{ print $2 }'`
-
-python3 /apps/el-gen/genesis_geth.py $tmp_dir/genesis-config.yaml | \
-  jq ".config.terminalTotalDifficulty=$ttd" | \
-  jq ".config.homesteadBlock=$homestead_block" | \
-  jq ".config.eip150Block=$eip150_block" | \
-  jq ".config.eip155Block=$eip155_block" | \
-  jq ".config.eip158Block=$eip158_block" | \
-  jq ".config.byzantiumBlock=$byzantium_block" | \
-  jq ".config.constantinopleBlock=$constantinople_block" | \
-  jq ".config.petersburgBlock=$petersburg_block" | \
-  jq ".config.istanbulBlock=$istanbul_block" | \
-  jq ".config.berlinBlock=$berlin_block" | \
-  jq ".config.londonBlock=$london_block" | \
-  jq ".config.mergeForkBlock=$merge_fork_block" | \
-  jq ".config.mergeNetsplitBlock=$merge_fork_block" \
-  > ../build/el/geth.json
-python3 ../accounts/mnemonic_to_csv.py $tmp_dir/genesis-config.yaml > ../build/el/accounts.csv

app/data/container-build/cerc-laconic-console-host/config.yml

@@ -1,6 +0,0 @@
-# Config for laconic-console running in a fixturenet with laconicd
-
-services:
-  wns:
-    server: 'LACONIC_HOSTED_ENDPOINT:9473/api'
-    webui: 'LACONIC_HOSTED_ENDPOINT:9473/console'

app/data/container-build/cerc-lighthouse/Dockerfile

@@ -1,9 +0,0 @@
-ARG TAG_SUFFIX="-modern"
-FROM sigp/lighthouse:v4.3.0${TAG_SUFFIX}
-
-RUN apt-get update; apt-get install bash netcat curl less jq wget -y;
-
-WORKDIR /root/
-ADD start-lighthouse.sh .
-
-ENTRYPOINT [ "./start-lighthouse.sh" ]

app/data/container-build/cerc-test-container/run.sh

@@ -1,21 +0,0 @@
-#!/usr/bin/env bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-# Test if the container's filesystem is old (run previously) or new
-EXISTSFILENAME=/data/exists
-echo "Test container starting"
-if [[ -f "$EXISTSFILENAME" ]];
-then
-    TIMESTAMP=`cat $EXISTSFILENAME`
-    echo "Filesystem is old, created: $TIMESTAMP" 
-else
-    echo "Filesystem is fresh"
-    echo `date` > $EXISTSFILENAME
-fi
-if [ -n "$CERC_TEST_PARAM_1" ]; then
-  echo "Test-param-1: ${CERC_TEST_PARAM_1}"
-fi
-# Run nginx which will block here forever
-/usr/sbin/nginx -g "daemon off;"

app/data/container-build/cerc-watcher-azimuth/Dockerfile

@@ -1,13 +0,0 @@
-FROM node:18.16.0-alpine3.16
-
-RUN apk --update --no-cache add git python3 alpine-sdk
-
-WORKDIR /app
-
-COPY . .
-
-RUN echo "Building azimuth-watcher-ts" && \
-    yarn && yarn build
-
-RUN echo "Install toml-js to update watcher config files" && \
-    yarn add --dev --ignore-workspace-root-check toml-js

app/data/container-build/cerc-webapp-base/config.yml

@@ -1 +0,0 @@
-# Put config here.

app/data/container-build/cerc-webapp-base/start-serving-app.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-    set -x
-fi
-
-CERC_WEBAPP_FILES_DIR="${CERC_WEBAPP_FILES_DIR:-/data}"
-
-/scripts/apply-webapp-config.sh /config/config.yml ${CERC_WEBAPP_FILES_DIR}
-http-server -p 80 ${CERC_WEBAPP_FILES_DIR}

app/data/stacks/azimuth/README.md

@@ -1,72 +0,0 @@
-# Azimuth Watcher
-
-Instructions to setup and deploy Azimuth Watcher stack
-
-## Setup
-
-Prerequisite: `ipld-eth-server` RPC and GQL endpoints
-
-Clone required repositories:
-
-```bash
-laconic-so --stack azimuth setup-repositories
-```
-
-NOTE: If the repository already exists and checked out to a different version, `setup-repositories` command will throw an error.
-For getting around this, the `azimuth-watcher-ts` repository can be removed and then run the command.
-
-Checkout to the required versions and branches in repos
-
-```bash
-# azimuth-watcher-ts
-cd ~/cerc/azimuth-watcher-ts
-git checkout v0.1.0
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack azimuth build-containers
-```
-
-This should create the required docker images in the local image registry.
-
-### Configuration
-
-* Create and update an env file to be used in the next step:
-
-  ```bash
-  # External ipld-eth-server endpoints
-  CERC_IPLD_ETH_RPC=
-  CERC_IPLD_ETH_GQL=
-  ```
-
-* NOTE: If `ipld-eth-server` is running on the host machine, use `host.docker.internal` as the hostname to access host ports
-
-### Deploy the stack
-
-* Deploy the containers:
-
-  ```bash
-  laconic-so --stack azimuth deploy-system --env-file <PATH_TO_ENV_FILE> up
-  ```
-
-* List and check the health status of all the containers using `docker ps` and wait for them to be `healthy`
-
-## Clean up
-
-Stop all the services running in background:
-
-```bash
-laconic-so --stack azimuth deploy-system down
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*watcher_db_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*watcher_db_data")
-```

app/data/stacks/fixturenet-optimism/README.md

@@ -1,123 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy an end-to-end L1+L2 stack with [fixturenet-eth](../fixturenet-eth/) (L1) and [Optimism](https://stack.optimism.io) (L2)
-
-We support running just the L2 part of stack, given an external L1 endpoint. Follow the [L2 only doc](./l2-only.md) for the same.
-
-## Setup
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers
-
-# If redeploying with changes in the stack containers
-laconic-so --stack fixturenet-optimism build-containers --force-rebuild
-
-# If errors are thrown during build, old images used by this stack would have to be deleted
-```
-
-Note: this will take >10 mins depending on the specs of your machine, and **requires** 16GB of memory or greater.
-
-This should create the required docker images in the local image registry:
-* `cerc/go-ethereum`
-* `cerc/lighthouse`
-* `cerc/fixturenet-eth-geth`
-* `cerc/fixturenet-eth-lighthouse`
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy up
-```
-
-The `fixturenet-optimism-contracts` service takes a while to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-It may restart a few times after running into errors.
-
-To list and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-* If `op-geth` service aborts or is restarted, the following error might occur in the `op-node` service:
-
-  ```bash
-  WARN [02-16|21:22:02.868] Derivation process temporary error       attempts=14 err="stage 0 failed resetting: temp: failed to find the L2 Heads to start from: failed to fetch L2 block by hash 0x0000000000000000000000000000000000000000000000000000000000000000: failed to determine block-hash of hash 0x0000000000000000000000000000000000000000000000000000000000000000, could not get payload: not found"
-  ```
-
-* This means that the data directory that `op-geth` is using is corrupted and needs to be reinitialized; the containers `op-geth`, `op-node` and `op-batcher` need to be started afresh:
-
-  WARNING: This will reset the L2 chain; consequently, all the data on it will be lost
-
-  * Stop and remove the concerned containers:
-
-    ```bash
-    # List the containers
-    docker ps -f "name=op-geth|op-node|op-batcher"
-
-    # Force stop and remove the listed containers
-    docker rm -f $(docker ps -qf "name=op-geth|op-node|op-batcher")
-    ```
-
-  * Remove the concerned volume:
-
-    ```bash
-    # List the volume
-    docker volume ls -q --filter name=l2_geth_data
-
-    # Remove the listed volume
-    docker volume rm $(docker volume ls -q --filter name=l2_geth_data)
-    ```
-
-  * Re-run the deployment command used in [Deploy](#deploy) to restart the stopped containers
-
-## Known Issues
-
-* Resource requirements (memory + time) for building the `cerc/foundry` image are on the higher side
-  * `cerc/optimism-contracts` image is currently based on `cerc/foundry` (Optimism requires foundry installation)

app/data/stacks/fixturenet-optimism/l2-only.md

@@ -1,100 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy L2 fixturenet using [Optimism](https://stack.optimism.io)
-
-## Setup
-
-Prerequisite: An L1 Ethereum RPC endpoint
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories --exclude git.vdb.to/cerc-io/go-ethereum
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers --include cerc/foundry,cerc/optimism-contracts,cerc/optimism-op-node,cerc/optimism-l2geth,cerc/optimism-op-batcher,cerc/optimism-op-proposer
-```
-
-This should create the required docker images in the local image registry:
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Create and update an env file to be used in the next step ([defaults](../../config/fixturenet-optimism/l1-params.env)):
-
-  ```bash
-  # External L1 endpoint
-  CERC_L1_CHAIN_ID=
-  CERC_L1_RPC=
-  CERC_L1_HOST=
-  CERC_L1_PORT=
-
-  # URL to get CSV with credentials for accounts on L1
-  # that are used to send balance to Optimism Proxy contract
-  # (enables them to do transactions on L2)
-  CERC_L1_ACCOUNTS_CSV_URL=
-
-  # OR
-  # Specify the required account credentials
-  CERC_L1_ADDRESS=
-  CERC_L1_PRIV_KEY=
-  CERC_L1_ADDRESS_2=
-  CERC_L1_PRIV_KEY_2=
-  ```
-
-* NOTE: If L1 is running on the host machine, use `host.docker.internal` as the hostname to access the host port
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism --env-file <PATH_TO_ENV_FILE> up
-```
-
-The `fixturenet-optimism-contracts` service may take a while (`~15 mins`) to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-
-To list down and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-See [Troubleshooting](./README.md#troubleshooting)

app/deploy/compose/deploy_docker.py

@@ -1,67 +0,0 @@
-# Copyright © 2022, 2023 Vulcanize
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-from python_on_whales import DockerClient, DockerException
-from app.deploy.deployer import Deployer, DeployerException
-
-
-class DockerDeployer(Deployer):
-    name: str = "compose"
-
-    def __init__(self, compose_files, compose_project_name, compose_env_file) -> None:
-        self.docker = DockerClient(compose_files=compose_files, compose_project_name=compose_project_name,
-                                   compose_env_file=compose_env_file)
-
-    def up(self, detach, services):
-        try:
-            return self.docker.compose.up(detach=detach, services=services)
-        except DockerException as e:
-            raise DeployerException(e)
-
-    def down(self, timeout, volumes):
-        try:
-            return self.docker.compose.down(timeout=timeout, volumes=volumes)
-        except DockerException as e:
-            raise DeployerException(e)
-
-    def ps(self):
-        try:
-            return self.docker.compose.ps()
-        except DockerException as e:
-            raise DeployerException(e)
-
-    def port(self, service, private_port):
-        try:
-            return self.docker.compose.port(service=service, private_port=private_port)
-        except DockerException as e:
-            raise DeployerException(e)
-
-    def execute(self, service, command, envs):
-        try:
-            return self.docker.compose.execute(service=service, command=command, envs=envs)
-        except DockerException as e:
-            raise DeployerException(e)
-
-    def logs(self, services, tail, follow, stream):
-        try:
-            return self.docker.compose.logs(services=services, tail=tail, follow=follow, stream=stream)
-        except DockerException as e:
-            raise DeployerException(e)
-
-    def run(self, image, command, user, volumes, entrypoint=None):
-        try:
-            return self.docker.run(image=image, command=command, user=user, volumes=volumes, entrypoint=entrypoint)
-        except DockerException as e:
-            raise DeployerException(e)

app/deploy/k8s/deploy_k8s.py

@@ -1,46 +0,0 @@
-# Copyright © 2023 Vulcanize
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-from kubernetes import client, config
-from app.deploy.deployer import Deployer
-
-
-class K8sDeployer(Deployer):
-    name: str = "k8s"
-
-    def __init__(self, compose_files, compose_project_name, compose_env_file) -> None:
-        config.load_kube_config()
-        self.client = client.CoreV1Api()
-
-    def up(self, detach, services):
-        pass
-
-    def down(self, timeout, volumes):
-        pass
-
-    def ps(self):
-        pass
-
-    def port(self, service, private_port):
-        pass
-
-    def execute(self, service_name, command, envs):
-        pass
-
-    def logs(self, services, tail, follow, stream):
-        pass
-
-    def run(self, image, command, user, volumes, entrypoint=None):
-        pass

docs/CONTRIBUTING.md

@@ -26,7 +26,7 @@ In addition to the pre-requisites listed in the [README](/README.md), the follow
 
 1. Clone this repository:
    ```
-   $ git clone https://github.com/cerc-io/stack-orchestrator.git
+   $ git clone https://git.vdb.to/cerc-io/stack-orchestrator.git
    ```
 
 2. Enter the project directory:

docs/adding-a-new-stack.md

@@ -1,14 +1,14 @@
 # Adding a new stack
 
-See [this PR](https://github.com/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://github.com/cerc-io/stack-orchestrator/pull/435) is another good example.
+See [this PR](https://git.vdb.to/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://git.vdb.to/cerc-io/stack-orchestrator/pull/435) is another good example.
 
 For external developers, we recommend forking this repo and adding your stack directly to your fork. This initially requires running in "developer mode" as described [here](/docs/CONTRIBUTING.md). Check out the [Namada stack](https://github.com/vknowable/stack-orchestrator/blob/main/app/data/stacks/public-namada/digitalocean_quickstart.md) from Knowable to see how that is done.
 
-Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://github.com/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
+Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
 
 ## Example
 
-- in `app/data/stacks/my-new-stack/stack.yml` add:
+- in `stack_orchestrator/data/stacks/my-new-stack/stack.yml` add:
 
 ```yaml
 version: "0.1"
@@ -21,7 +21,7 @@ pods:
   - my-new-stack
 ```
 
-- in `app/data/container-build/cerc-my-new-stack/build.sh` add:
+- in `stack_orchestrator/data/container-build/cerc-my-new-stack/build.sh` add:
 
 ```yaml
 #!/usr/bin/env bash
@@ -30,7 +30,7 @@ source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 docker build -t cerc/my-new-stack:local -f ${CERC_REPO_BASE_DIR}/my-new-stack/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/my-new-stack
 ```
 
-- in `app/data/compose/docker-compose-my-new-stack.yml` add:
+- in `stack_orchestrator/data/compose/docker-compose-my-new-stack.yml` add:
 
 ```yaml
 version: "3.2"
@@ -43,20 +43,20 @@ services:
       - "0.0.0.0:3000:3000"
 ```
 
-- in `app/data/repository-list.txt` add:
+- in `stack_orchestrator/data/repository-list.txt` add:
 
 ```bash
 github.com/my-org/my-new-stack
 ```
 whereby that repository contains your source code and a `Dockerfile`, and matches the `repos:` field in the `stack.yml`.
 
-- in `app/data/container-image-list.txt` add:
+- in `stack_orchestrator/data/container-image-list.txt` add:
 
 ```bash
 cerc/my-new-stack
 ```
 
-- in `app/data/pod-list.txt` add:
+- in `stack_orchestrator/data/pod-list.txt` add:
 
 ```bash
 my-new-stack

docs/fetching-containers.md

@@ -0,0 +1,9 @@
+# Fetching pre-built container images
+When Stack Orchestrator deploys a stack containing a suite of one or more containers it expects images for those containers to be on the local machine with a tag of the form `<image-name>:local` Images for these containers can be built from source (and optionally base container images from public registries) with the `build-containers` subcommand. 
+
+However, the task of building a large number of containers from source may consume considerable time and machine resources. This is where the `fetch-containers` subcommand steps in. It is designed to work exactly like `build-containers` but instead the images, pre-built, are fetched from an image registry then re-tagged for deployment. It can be used in place of `build-containers` for any stack provided the necessary containers, built for the local machine architecture (e.g. arm64 or x86-64) have already been published in an image registry.
+## Usage
+To use `fetch-containers`, provide an image registry path, a username and token/password with read access to the registry, and optionally specify `--force-local-overwrite`. If this argument is not specified, if there is already a locally built or previously fetched image for a stack container on the machine, it will not be overwritten and a warning issued.
+```
+$ laconic-so --stack mobymask-v3-demo fetch-containers --image-registry git.vdb.to/cerc-io --registry-username <registry-user> --registry-token <registry-token> --force-local-overwrite
+```

docs/laconicd-with-console.md

@@ -15,132 +15,139 @@ To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the
 16 GB Memory / 8 Intel vCPUs / 160 GB Disk.
 
 1. Login to the droplet as root (either by SSH key or password set in the DO console)
+    ```
+    ssh root@IP
+    ```
 
-```
-ssh root@IP
-```
+1. Get the install script, give it executable permissions, and run it:
 
-2. Get the install script, give it executable permissions, and run it:
+    ```
+    curl -o install.sh https://raw.githubusercontent.com/cerc-io/stack-orchestrator/main/scripts/quick-install-linux.sh
+    ```
+    ```
+    chmod +x install.sh
+    ```
+    ```
+    bash install.sh
+    ```
 
-```
-curl -o install.sh https://raw.githubusercontent.com/cerc-io/stack-orchestrator/main/scripts/quick-install-linux.sh
-```
-```
-chmod +x install.sh
-```
-```
-bash install.sh
-```
+1. Confirm docker was installed and activate the changes in `~/.profile`:
 
-3. Confirm docker was installed and activate the changes in `~/.profile`:
+    ```
+    docker run hello-world
+   ```
+   ```
+   source ~/.profile
+   ```
 
-```
-docker run hello-world
-```
-```
-source ~/.profile
-```
+1. Verify installation:
 
-4. Verify installation:
-
-```
-laconic-so version
-```
+    ```
+    laconic-so version
+    ```
 
 ## Setup the laconic fixturenet stack
 
 1. Get the repositories
 
-```
-laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
-```
+    ```
+    laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
+    ```
 
-2. Set this environment variable to the Laconic self-hosted Gitea instance:
+1. Build the containers:
 
-```
-export CERC_NPM_REGISTRY_URL=https://git.vdb.to/api/packages/cerc-io/npm/
-```
+    ```
+    laconic-so --stack fixturenet-laconic-loaded build-containers
+    ```
 
-3. Build the containers:
+    It's possible to run into an `ESOCKETTIMEDOUT` error, e.g., `error An unexpected error occurred: "https://registry.yarnpkg.com/@material-ui/icons/-/icons-4.11.3.tgz: ESOCKETTIMEDOUT"`. This may happen even if you have a great internet connection. In that case, re-run the `build-containers` command.
 
-```
-laconic-so --stack fixturenet-laconic-loaded build-containers
-```
 
-It's possible to run into an `ESOCKETTIMEDOUT` error, e.g., `error An unexpected error occurred: "https://registry.yarnpkg.com/@material-ui/icons/-/icons-4.11.3.tgz: ESOCKETTIMEDOUT"`. This may happen even if you have a great internet connection. In that case, re-run the `build-containers` command.
+1. Set this environment variable to your droplet's IP address or fully qualified DNS host name if it has one:
 
-4. Set this environment variable to your droplet's IP address:
+    ```
+    export BACKEND_ENDPOINT=http://<your-IP-or-hostname>:9473
+    ```
+    e.g.
+    ```
+    export BACKEND_ENDPOINT=http://my-test-server.example.com:9473
+    ```
 
-```
-export LACONIC_HOSTED_ENDPOINT=http://<your-IP>
-```
+1. Create a deployment directory for the stack:
+    ```
+    laconic-so --stack fixturenet-laconic-loaded deploy init --output laconic-loaded.spec --map-ports-to-host any-same --config LACONIC_HOSTED_ENDPOINT=$BACKEND_ENDPOINT
+    ```
+    ```
+    laconic-so --stack fixturenet-laconic-loaded deploy create --deployment-dir laconic-loaded-deployment --spec-file laconic-loaded.spec
+    ```
+2. Start the stack:
 
-5. Deploy the stack:
+    ```
+    laconic-so deployment --dir laconic-loaded-deployment start
+    ```
 
-```
-laconic-so --stack fixturenet-laconic-loaded deploy up
-```
+3. Check the logs:
 
-6. Check the logs:
+    ```
+    laconic-so deployment --dir laconic-loaded-deployment logs
+    ```
 
-```
-laconic-so --stack fixturenet-laconic-loaded deploy logs
-```
+    You'll see output from `laconicd` and the block height should be >1 to confirm it is running:
 
-You'll see output from `laconicd` and the block height should be >1 to confirm it is running:
+    ```
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:29PM INF indexed block exents height=12 module=txindex server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF Timed out dur=4976.960115 height=13 module=consensus round=0 server=node step=1
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received proposal module=consensus proposal={"Type":32,"block_id":{"hash":"D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4","parts":{"hash":"22411A20B7F14CDA33244420FBDDAF24450C0628C7A06034FF22DAC3699DDCC8","total":1}},"height":13,"pol_round":-1,"round":0,"signature":"DEuqnaQmvyYbUwckttJmgKdpRu6eVm9i+9rQ1pIrV2PidkMNdWRZBLdmNghkIrUzGbW8Xd7UVJxtLRmwRASgBg==","timestamp":"2023-04-18T21:30:01.49450663Z"} server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received complete proposal block hash=D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4 height=13 module=consensus server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF finalizing commit of block hash={} height=13 module=consensus num_txs=0 root=1A8CA1AF139CCC80EC007C6321D8A63A46A793386EE2EDF9A5CA0AB2C90728B7 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF minted coins from module account amount=2059730459416582643aphoton from=mint module=x/bank
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF executed block height=13 module=state num_invalid_txs=0 num_valid_txs=0 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF commit synced commit=436F6D6D697449447B5B363520313037203630203232372039352038352032303820313334203231392032303520313433203130372031343920313431203139203139322038362031323720362031383520323533203137362031333820313735203135392031383620323334203135382031323120313431203230342037335D3A447D
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF committed state app_hash=416B3CE35F55D086DBCD8F6B958D13C0567F06B9FDB08AAF9FBAEA9E798DCC49 height=13 module=state num_txs=0 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF indexed block exents height=13 module=txindex server=node
+    ```
 
-```
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:29PM INF indexed block exents height=12 module=txindex server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF Timed out dur=4976.960115 height=13 module=consensus round=0 server=node step=1
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received proposal module=consensus proposal={"Type":32,"block_id":{"hash":"D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4","parts":{"hash":"22411A20B7F14CDA33244420FBDDAF24450C0628C7A06034FF22DAC3699DDCC8","total":1}},"height":13,"pol_round":-1,"round":0,"signature":"DEuqnaQmvyYbUwckttJmgKdpRu6eVm9i+9rQ1pIrV2PidkMNdWRZBLdmNghkIrUzGbW8Xd7UVJxtLRmwRASgBg==","timestamp":"2023-04-18T21:30:01.49450663Z"} server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received complete proposal block hash=D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4 height=13 module=consensus server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF finalizing commit of block hash={} height=13 module=consensus num_txs=0 root=1A8CA1AF139CCC80EC007C6321D8A63A46A793386EE2EDF9A5CA0AB2C90728B7 server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF minted coins from module account amount=2059730459416582643aphoton from=mint module=x/bank
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF executed block height=13 module=state num_invalid_txs=0 num_valid_txs=0 server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF commit synced commit=436F6D6D697449447B5B363520313037203630203232372039352038352032303820313334203231392032303520313433203130372031343920313431203139203139322038362031323720362031383520323533203137362031333820313735203135392031383620323334203135382031323120313431203230342037335D3A447D
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF committed state app_hash=416B3CE35F55D086DBCD8F6B958D13C0567F06B9FDB08AAF9FBAEA9E798DCC49 height=13 module=state num_txs=0 server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF indexed block exents height=13 module=txindex server=node
-```
+4. Confirm operation of the registry CLI:
 
-7. Confirm operation of the registry CLI:
+   ```
+   laconic-so deployment --dir laconic-loaded-deployment exec cli "laconic cns status"
+   ```
 
-```
-laconic-so --stack fixturenet-laconic-loaded deploy exec cli "laconic cns status"
-```
-
-```
-{
-  "version": "0.3.0",
-  "node": {
-    "id": "4216af2ac9f68bda33a38803fc1b5c9559312c1d",
-    "network": "laconic_9000-1",
-    "moniker": "localtestnet"
-  },
-  "sync": {
-    "latest_block_hash": "1BDF4CB9AE2390DA65BCF997C83133C18014FCDDCAE03708488F0B56FCEEA429",
-    "latest_block_height": "5",
-    "latest_block_time": "2023-08-09 16:00:30.386903172 +0000 UTC",
-    "catching_up": false
-  },
-  "validator": {
-    "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
-    "voting_power": "1000000000000000"
-  },
-  "validators": [
-    {
-      "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
-      "voting_power": "1000000000000000",
-      "proposer_priority": "0"
-    }
-  ],
-  "num_peers": "0",
-  "peers": [],
-  "disk_usage": "292.0K"
-}
-```
+   ```
+   {
+     "version": "0.3.0",
+     "node": {
+       "id": "4216af2ac9f68bda33a38803fc1b5c9559312c1d",
+       "network": "laconic_9000-1",
+       "moniker": "localtestnet"
+     },
+     "sync": {
+       "latest_block_hash": "1BDF4CB9AE2390DA65BCF997C83133C18014FCDDCAE03708488F0B56FCEEA429",
+       "latest_block_height": "5",
+       "latest_block_time": "2023-08-09 16:00:30.386903172 +0000 UTC",
+       "catching_up": false
+     },
+     "validator": {
+       "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+       "voting_power": "1000000000000000"
+     },
+     "validators": [
+       {
+         "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+         "voting_power": "1000000000000000",
+         "proposer_priority": "0"
+       }
+     ],
+     "num_peers": "0",
+     "peers": [],
+     "disk_usage": "292.0K"
+   }
+   ```
 
 ## Configure Digital Ocean firewall
 
+(Note this step may not be necessary depending on the droplet image used)
+
 Let's open some ports.
 
 1. In the Digital Ocean web console, navigate to your droplet's main page. Select the "Networking" tab and scroll down to "Firewall".

docs/spec.md

@@ -1,6 +1,6 @@
 # Specification
 
-Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://github.com/cerc-io/stack-orchestrator/issues/315).
+Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315).
 
 ## Implementation
 

docs/webapp.md

@@ -0,0 +1,64 @@
+### Building and Running Webapps
+
+It is possible to build and run Next.js webapps using the `build-webapp` and `run-webapp` subcommands.
+
+To make it easier to build once and deploy into different environments and with different configuration,
+compilation and static page generation are separated in the `build-webapp` and `run-webapp` steps.
+
+This offers much more flexibilty than standard Next.js build methods, since any environment variables accessed
+via `process.env`, whether for pages or for API, will have values drawn from their runtime deployment environment,
+not their build environment. 
+
+## Building
+
+Building usually requires no additional configuration.  By default, the Next.js version specified in `package.json`
+is used, and either `yarn` or `npm` will be used automatically depending on which lock files are present.  These
+can be overidden with the build arguments `CERC_NEXT_VERSION` and `CERC_BUILD_TOOL` respectively.  For example: `--extra-build-args "--build-arg CERC_NEXT_VERSION=13.4.12"`
+
+**Example**:
+```
+$ cd ~/cerc
+$ git clone git@git.vdb.to:cerc-io/test-progressive-web-app.git
+$ laconic-so build-webapp --source-repo ~/cerc/test-progressive-web-app
+...
+
+Built host container for ~/cerc/test-progressive-web-app with tag:
+
+    cerc/test-progressive-web-app:local
+
+To test locally run:
+
+    laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment.env
+
+```
+
+## Running
+
+With `run-webapp` a new container will be launched on the local machine, with runtime configuration provided by `--env-file` (if specified) and published on an available port.  Multiple instances can be launched with different configuration.
+
+**Example**:
+```
+# Production env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/production.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 4c6e893bf436b3e91a2b92ce37e30e499685131705700bd92a90d2eb14eefd05
+URL: http://localhost:32768
+
+# Dev env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/dev.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 9ab96494f563aafb6c057d88df58f9eca81b90f8721a4e068493a289a976051c
+URL: http://localhost:32769
+```
+
+## Deploying
+
+Use the subcommand `deploy-webapp create` to make a deployment directory that can be subsequently deployed to a Kubernetes cluster.
+Example commands are shown below, assuming that the webapp container image `cerc/test-progressive-web-app:local` has already been built:
+```
+$ laconic-so deploy-webapp create --kube-config ~/kubectl/k8s-kubeconfig.yaml --image-registry registry.digitalocean.com/laconic-registry --deployment-dir webapp-k8s-deployment --image cerc/test-progressive-web-app:local --url https://test-pwa-app.hosting.laconic.com/ --env-file test-webapp.env
+$ laconic-so deployment --dir webapp-k8s-deployment push-images
+$ laconic-so deployment --dir webapp-k8s-deployment start
+```

requirements.txt

@@ -1,4 +1,5 @@
 python-decouple>=3.8
+python-dotenv==1.0.0
 GitPython>=3.1.32
 tqdm>=4.65.0
 python-on-whales>=0.64.0
@@ -9,3 +10,4 @@ pydantic==1.10.9
 tomli==2.0.1
 validators==0.22.0
 kubernetes>=28.1.0
+humanfriendly>=10.0

scripts/cloud-init-dev-mode-install.yaml

@@ -41,4 +41,4 @@ runcmd:
   - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
   - systemctl enable docker
   - systemctl start docker
-  - git clone https://github.com/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator
+  - git clone https://git.vdb.to/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator

scripts/cloud-init-user-mode-install.yaml

@@ -31,5 +31,5 @@ runcmd:
   - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
   - systemctl enable docker
   - systemctl start docker
-  - curl -L -o /usr/local/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+  - curl -L -o /usr/local/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
   - chmod +x /usr/local/bin/laconic-so

scripts/create_build_tag_file.sh

@@ -1,6 +1,6 @@
-build_tag_file_name=./app/data/build_tag.txt
+build_tag_file_name=./stack_orchestrator/data/build_tag.txt
 echo "# This file should be re-generated running: scripts/create_build_tag_file.sh script" > $build_tag_file_name
-product_version_string=$( tail -1 ./app/data/version.txt )
+product_version_string=$( tail -1 ./stack_orchestrator/data/version.txt )
 commit_string=$( git rev-parse --short HEAD )
 timestamp_string=$(date +'%Y%m%d%H%M')
 build_tag_string=${product_version_string}-${commit_string}-${timestamp_string}

scripts/quick-deploy-test.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+# Beginnings of a script to quickly spin up and test a deployment
+if [[ -n "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+if [[ -n "$1" ]]; then
+	stack_name=$1
+else
+	stack_name="test"
+fi
+spec_file_name="${stack_name}-spec.yml"
+deployment_dir_name="${stack_name}-deployment"
+rm -f ${spec_file_name}
+rm -rf ${deployment_dir_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose init --output ${spec_file_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose create --deployment-dir ${deployment_dir_name} --spec-file ${spec_file_name}
+#laconic-so deployment --dir ${deployment_dir_name} start
+#laconic-so deployment --dir ${deployment_dir_name} ps
+#laconic-so deployment --dir ${deployment_dir_name} stop

scripts/quick-install-linux.sh

@@ -137,7 +137,7 @@ fi
 echo "**************************************************************************************"
 echo "Installing laconic-so"
 # install latest `laconic-so`
-distribution_url=https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+distribution_url=https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 install_filename=${install_dir}/laconic-so
 mkdir -p  ${install_dir}
 curl -L -o ${install_filename} ${distribution_url}

setup.py

@@ -13,8 +13,8 @@ setup(
     description='Orchestrates deployment of the Laconic stack',
     long_description=long_description,
     long_description_content_type="text/markdown",
-    url='https://github.com/cerc-io/stack-orchestrator',
-    py_modules=['cli', 'app'],
+    url='https://git.vdb.to/cerc-io/stack-orchestrator',
+    py_modules=['stack_orchestrator'],
     packages=find_packages(),
     install_requires=[requirements],
     python_requires='>=3.7',
@@ -25,6 +25,6 @@ setup(
         "Operating System :: OS Independent",
     ],
     entry_points={
-        'console_scripts': ['laconic-so=cli:cli'],
+        'console_scripts': ['laconic-so=stack_orchestrator.main:cli'],
     }
 )

stack_orchestrator/base.py

@@ -15,7 +15,7 @@
 
 import os
 from abc import ABC, abstractmethod
-from app.deploy.deploy import get_stack_status
+from stack_orchestrator.deploy.deploy import get_stack_status
 from decouple import config
 
 

stack_orchestrator/build/build_containers.py

@@ -0,0 +1,183 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds or pulls containers for the system components
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+import sys
+from decouple import config
+import subprocess
+import click
+from pathlib import Path
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import include_exclude_check, stack_is_external, error_exit
+from stack_orchestrator.base import get_npm_registry_url
+from stack_orchestrator.build.build_types import BuildContext
+from stack_orchestrator.build.publish import publish_image
+from stack_orchestrator.build.build_util import get_containers_in_scope
+
+# TODO: find a place for this
+#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
+
+
+def make_container_build_env(dev_root_path: str,
+                             container_build_dir: str,
+                             debug: bool,
+                             force_rebuild: bool,
+                             extra_build_args: str):
+    container_build_env = {
+        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
+        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
+        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
+        "CERC_REPO_BASE_DIR": dev_root_path,
+        "CERC_CONTAINER_BASE_DIR": container_build_dir,
+        "CERC_HOST_UID": f"{os.getuid()}",
+        "CERC_HOST_GID": f"{os.getgid()}",
+        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
+    }
+    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
+    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
+    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
+    docker_host_env = os.getenv("DOCKER_HOST")
+    if docker_host_env:
+        container_build_env.update({"DOCKER_HOST": docker_host_env})
+
+    return container_build_env
+
+
+def process_container(build_context: BuildContext) -> bool:
+    if not opts.o.quiet:
+        print(f"Building: {build_context.container}")
+
+    default_container_tag = f"{build_context.container}:local"
+    build_context.container_build_env.update({"CERC_DEFAULT_CONTAINER_IMAGE_TAG": default_container_tag})
+
+    # Check if this is in an external stack
+    if stack_is_external(build_context.stack):
+        container_parent_dir = Path(build_context.stack).parent.parent.joinpath("container-build")
+        temp_build_dir = container_parent_dir.joinpath(build_context.container.replace("/", "-"))
+        temp_build_script_filename = temp_build_dir.joinpath("build.sh")
+        # Now check if the container exists in the external stack.
+        if not temp_build_script_filename.exists():
+            # If not, revert to building an internal container
+            container_parent_dir = build_context.container_build_dir
+    else:
+        container_parent_dir = build_context.container_build_dir
+
+    build_dir = container_parent_dir.joinpath(build_context.container.replace("/", "-"))
+    build_script_filename = build_dir.joinpath("build.sh")
+
+    if opts.o.verbose:
+        print(f"Build script filename: {build_script_filename}")
+    if os.path.exists(build_script_filename):
+        build_command = build_script_filename.as_posix()
+    else:
+        if opts.o.verbose:
+            print(f"No script file found: {build_script_filename}, using default build script")
+        repo_dir = build_context.container.split('/')[1]
+        # TODO: make this less of a hack -- should be specified in some metadata somewhere
+        # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
+        repo_full_path = os.path.join(build_context.dev_root_path, repo_dir)
+        repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
+        build_command = os.path.join(build_context.container_build_dir,
+                                     "default-build.sh") + f" {default_container_tag} {repo_dir_or_build_dir}"
+    if not opts.o.dry_run:
+        # No PATH at all causes failures with podman.
+        if "PATH" not in build_context.container_build_env:
+            build_context.container_build_env["PATH"] = os.environ["PATH"]
+        if opts.o.verbose:
+            print(f"Executing: {build_command} with environment: {build_context.container_build_env}")
+        build_result = subprocess.run(build_command, shell=True, env=build_context.container_build_env)
+        if opts.o.verbose:
+            print(f"Return code is: {build_result.returncode}")
+        if build_result.returncode != 0:
+            return False
+        else:
+            return True
+    else:
+        print("Skipped")
+        return True
+
+
+@click.command()
+@click.option('--include', help="only build these containers")
+@click.option('--exclude', help="don\'t build these containers")
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.option("--publish-images", is_flag=True, default=False, help="Publish the built images in the specified image registry")
+@click.option("--image-registry", help="Specify the image registry for --publish-images")
+@click.pass_context
+def command(ctx, include, exclude, force_rebuild, extra_build_args, publish_images, image_registry):
+    '''build the set of containers required for a complete stack'''
+
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not opts.o.quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not os.path.isdir(dev_root_path):
+        print('Dev root directory doesn\'t exist, creating')
+
+    if publish_images:
+        if not image_registry:
+            error_exit("--image-registry must be supplied with --publish-images")
+
+    containers_in_scope = get_containers_in_scope(stack)
+
+    container_build_env = make_container_build_env(dev_root_path,
+                                                   container_build_dir,
+                                                   opts.o.debug,
+                                                   force_rebuild,
+                                                   extra_build_args)
+
+    for container in containers_in_scope:
+        if include_exclude_check(container, include, exclude):
+
+            build_context = BuildContext(
+                stack,
+                container,
+                container_build_dir,
+                container_build_env,
+                dev_root_path
+            )
+            result = process_container(build_context)
+            if result:
+                if publish_images:
+                    publish_image(f"{container}:local", image_registry)
+            else:
+                print(f"Error running build for {build_context.container}")
+                if not opts.o.continue_on_error:
+                    error_exit("container build failed and --continue-on-error not set, exiting")
+                    sys.exit(1)
+                else:
+                    print("****** Container Build Error, continuing because --continue-on-error is set")
+        else:
+            if opts.o.verbose:
+                print(f"Excluding: {container}")

stack_orchestrator/build/build_npms.py

@@ -25,8 +25,8 @@ from decouple import config
 import click
 import importlib.resources
 from python_on_whales import docker, DockerException
-from app.base import get_stack
-from app.util import include_exclude_check, get_parsed_stack_config
+from stack_orchestrator.base import get_stack
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config
 
 builder_js_image_name = "cerc/builder-js:local"
 
@@ -83,7 +83,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
         os.makedirs(build_root_path)
 
     # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
+    from stack_orchestrator import data
     with importlib.resources.open_text(data, "npm-package-list.txt") as package_list_file:
         all_packages = package_list_file.read().splitlines()
 

stack_orchestrator/build/build_types.py

@@ -1,4 +1,4 @@
-# Copyright © 2022, 2023 Vulcanize
+# Copyright © 2024 Vulcanize
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License as published by
@@ -13,18 +13,17 @@
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <http:#www.gnu.org/licenses/>.
 
+
+from dataclasses import dataclass
 from pathlib import Path
-import typing
-from app.util import get_yaml
+from typing import Mapping
 
 
-class Spec:
+@dataclass
+class BuildContext:
+    stack: str
+    container: str
+    container_build_dir: Path
+    container_build_env: Mapping[str,str]
+    dev_root_path: str
 
-    obj: typing.Any
-
-    def __init__(self) -> None:
-        pass
-
-    def init_from_file(self, file_path: Path):
-        with file_path:
-            self.obj = get_yaml().load(open(file_path, "r"))

stack_orchestrator/build/build_util.py

@@ -0,0 +1,43 @@
+# Copyright © 2024 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+import importlib.resources
+
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import get_parsed_stack_config, warn_exit
+
+
+def get_containers_in_scope(stack: str):
+
+    # See: https://stackoverflow.com/a/20885799/1701505
+    from stack_orchestrator import data
+    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
+        all_containers = container_list_file.read().splitlines()
+
+    containers_in_scope = []
+    if stack:
+        stack_config = get_parsed_stack_config(stack)
+        if "containers" not in stack_config or stack_config["containers"] is None:
+            warn_exit(f"stack {stack} does not define any containers")
+        containers_in_scope = stack_config['containers']
+    else:
+        containers_in_scope = all_containers
+
+    if opts.o.verbose:
+        print(f'Containers: {containers_in_scope}')
+        if stack:
+            print(f"Stack: {stack}")
+
+    return containers_in_scope

stack_orchestrator/build/build_webapp.py

@@ -0,0 +1,117 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds webapp containers
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+import sys
+
+from decouple import config
+import click
+from pathlib import Path
+from stack_orchestrator.build import build_containers
+from stack_orchestrator.deploy.webapp.util import determine_base_container, TimedLogger
+from stack_orchestrator.build.build_types import BuildContext
+
+
+@click.command()
+@click.option('--base-container')
+@click.option('--source-repo', help="directory containing the webapp to build", required=True)
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.option("--tag", help="Container tag (default: cerc/<app_name>:local)")
+@click.pass_context
+def command(ctx, base_container, source_repo, force_rebuild, extra_build_args, tag):
+    '''build the specified webapp container'''
+    logger = TimedLogger()
+
+    quiet = ctx.obj.quiet
+    debug = ctx.obj.debug
+    verbose = ctx.obj.verbose
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        logger.log(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if verbose:
+        logger.log(f'Dev Root is: {dev_root_path}')
+
+    if not base_container:
+        base_container = determine_base_container(source_repo)
+
+    # First build the base container.
+    container_build_env = build_containers.make_container_build_env(dev_root_path, container_build_dir, debug,
+                                                                    force_rebuild, extra_build_args)
+
+    if verbose:
+        logger.log(f"Building base container: {base_container}")
+
+    build_context_1 = BuildContext(
+        stack,
+        base_container,
+        container_build_dir,
+        container_build_env,
+        dev_root_path,
+    )
+    ok = build_containers.process_container(build_context_1)
+    if not ok:
+        logger.log("ERROR: Build failed.")
+        sys.exit(1)
+
+    if verbose:
+        logger.log(f"Base container {base_container} build finished.")
+
+    # Now build the target webapp.  We use the same build script, but with a different Dockerfile and work dir.
+    container_build_env["CERC_WEBAPP_BUILD_RUNNING"] = "true"
+    container_build_env["CERC_CONTAINER_BUILD_WORK_DIR"] = os.path.abspath(source_repo)
+    container_build_env["CERC_CONTAINER_BUILD_DOCKERFILE"] = os.path.join(container_build_dir,
+                                                                          base_container.replace("/", "-"),
+                                                                          "Dockerfile.webapp")
+    if not tag:
+        webapp_name = os.path.abspath(source_repo).split(os.path.sep)[-1]
+        tag = f"cerc/{webapp_name}:local"
+
+    container_build_env["CERC_CONTAINER_BUILD_TAG"] = tag
+
+    if verbose:
+        logger.log(f"Building app container: {tag}")
+
+    build_context_2 = BuildContext(
+        stack,
+        base_container,
+        container_build_dir,
+        container_build_env,
+        dev_root_path,
+    )
+    ok = build_containers.process_container(build_context_2)
+    if not ok:
+        logger.log("ERROR: Build failed.")
+        sys.exit(1)
+
+    if verbose:
+        logger.log(f"App container {base_container} build finished.")
+        logger.log("build-webapp complete", show_step_time=False, show_total_time=True)

stack_orchestrator/build/fetch_containers.py

@@ -0,0 +1,195 @@
+# Copyright © 2024 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+import click
+from dataclasses import dataclass
+import json
+import platform
+from python_on_whales import DockerClient
+from python_on_whales.components.manifest.cli_wrapper import ManifestCLI, ManifestList
+from python_on_whales.utils import run
+import requests
+from typing import List
+
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import include_exclude_check, error_exit
+from stack_orchestrator.build.build_util import get_containers_in_scope
+
+# Experimental fetch-container command
+
+
+@dataclass
+class RegistryInfo:
+    registry: str
+    registry_username: str
+    registry_token: str
+
+
+# Extending this code to support the --verbose option, cnosider contributing upstream
+# https://github.com/gabrieldemarmiesse/python-on-whales/blob/master/python_on_whales/components/manifest/cli_wrapper.py#L129
+class ExtendedManifestCLI(ManifestCLI):
+    def inspect_verbose(self, x: str) -> ManifestList:
+        """Returns a Docker manifest list object."""
+        json_str = run(self.docker_cmd + ["manifest", "inspect", "--verbose", x])
+        return json.loads(json_str)
+
+
+def _local_tag_for(container: str):
+    return f"{container}:local"
+
+
+# See: https://docker-docs.uclv.cu/registry/spec/api/
+# Emulate this:
+# $ curl -u "my-username:my-token" -X GET "https://<container-registry-hostname>/v2/cerc-io/cerc/test-container/tags/list"
+# {"name":"cerc-io/cerc/test-container","tags":["202402232130","202402232208"]}
+def _get_tags_for_container(container: str, registry_info: RegistryInfo) -> List[str]:
+    # registry looks like: git.vdb.to/cerc-io
+    registry_parts = registry_info.registry.split("/")
+    url = f"https://{registry_parts[0]}/v2/{registry_parts[1]}/{container}/tags/list"
+    if opts.o.debug:
+        print(f"Fetching tags from: {url}")
+    response = requests.get(url, auth=(registry_info.registry_username, registry_info.registry_token))
+    if response.status_code == 200:
+        tag_info = response.json()
+        if opts.o.debug:
+            print(f"container tags list: {tag_info}")
+        tags_array = tag_info["tags"]
+        return tags_array
+    else:
+        error_exit(f"failed to fetch tags from image registry, status code: {response.status_code}")
+
+
+def _find_latest(candidate_tags: List[str]):
+    # Lex sort should give us the latest first
+    sorted_candidates = sorted(candidate_tags)
+    if opts.o.debug:
+        print(f"sorted candidates: {sorted_candidates}")
+    return sorted_candidates[-1]
+
+
+def _filter_for_platform(container: str, 
+                         registry_info: RegistryInfo,
+                         tag_list: List[str]) -> List[str] :
+    filtered_tags = []
+    this_machine = platform.machine()
+    # Translate between Python and docker platform names
+    if this_machine == "x86_64":
+        this_machine = "amd64"
+    if this_machine == "aarch64":
+        this_machine = "arm64"
+    if opts.o.debug:
+        print(f"Python says the architecture is: {this_machine}")
+    docker = DockerClient()
+    for tag in tag_list:
+        remote_tag = f"{registry_info.registry}/{container}:{tag}"
+        manifest_cmd = ExtendedManifestCLI(docker.client_config)
+        manifest = manifest_cmd.inspect_verbose(remote_tag)
+        if opts.o.debug:
+            print(f"manifest: {manifest}")
+        image_architecture =  manifest["Descriptor"]["platform"]["architecture"]
+        if opts.o.debug:
+            print(f"image_architecture: {image_architecture}")
+        if this_machine == image_architecture:
+            filtered_tags.append(tag)
+    if opts.o.debug:
+        print(f"Tags filtered for platform: {filtered_tags}")
+    return filtered_tags
+
+
+def _get_latest_image(container: str, registry_info: RegistryInfo):
+    all_tags = _get_tags_for_container(container, registry_info)
+    tags_for_platform = _filter_for_platform(container, registry_info, all_tags)
+    if len(tags_for_platform) > 0:
+        latest_tag = _find_latest(tags_for_platform)
+        return f"{container}:{latest_tag}"
+    else:
+        return None
+
+
+def _fetch_image(tag: str, registry_info: RegistryInfo):
+    docker = DockerClient()
+    remote_tag = f"{registry_info.registry}/{tag}"
+    if opts.o.debug:
+        print(f"Attempting to pull this image: {remote_tag}")
+    docker.image.pull(remote_tag)
+
+
+def _exists_locally(container: str):
+    docker = DockerClient()
+    return docker.image.exists(_local_tag_for(container))
+
+
+def _add_local_tag(remote_tag: str, registry: str, local_tag: str):
+    docker = DockerClient()
+    docker.image.tag(f"{registry}/{remote_tag}", local_tag)
+
+
+@click.command()
+@click.option('--include', help="only fetch these containers")
+@click.option('--exclude', help="don\'t fetch these containers")
+@click.option("--force-local-overwrite", is_flag=True, default=False, help="Overwrite a locally built image, if present")
+@click.option("--image-registry", required=True, help="Specify the image registry to fetch from")
+@click.option("--registry-username", required=True, help="Specify the image registry username")
+@click.option("--registry-token", required=True, help="Specify the image registry access token")
+@click.pass_context
+def command(ctx, include, exclude, force_local_overwrite, image_registry, registry_username, registry_token):
+    '''EXPERIMENTAL: fetch the images for a stack from remote registry'''
+
+    registry_info = RegistryInfo(image_registry, registry_username, registry_token)
+    docker = DockerClient()
+    if not opts.o.quiet:
+        print("Logging into container registry:")
+    docker.login(registry_info.registry, registry_info.registry_username, registry_info.registry_token)
+    # Generate list of target containers
+    stack = ctx.obj.stack
+    containers_in_scope = get_containers_in_scope(stack)
+    all_containers_found = True
+    for container in containers_in_scope:
+        local_tag = _local_tag_for(container)
+        if include_exclude_check(container, include, exclude):
+            if opts.o.debug:
+                print(f"Processing: {container}")
+            # For each container, attempt to find the latest of a set of
+            # images with the correct name and platform in the specified registry
+            image_to_fetch = _get_latest_image(container, registry_info)
+            if not image_to_fetch:
+                print(f"Warning: no image found to fetch for container: {container}")
+                all_containers_found = False
+                continue
+            if opts.o.debug:
+                print(f"Fetching: {image_to_fetch}")
+            _fetch_image(image_to_fetch, registry_info)
+            # Now check if the target container already exists exists locally already
+            if (_exists_locally(container)):
+                if not opts.o.quiet:
+                    print(f"Container image {container} already exists locally")
+                # if so, fail unless the user specified force-local-overwrite
+                if (force_local_overwrite):
+                    # In that case remove the existing :local tag
+                    if not opts.o.quiet:
+                        print(f"Warning: overwriting local tag from this image: {container} because "
+                              "--force-local-overwrite was specified")
+                else:
+                    if not opts.o.quiet:
+                        print(f"Skipping local tagging for this image: {container} because that would "
+                              "overwrite an existing :local tagged image, use --force-local-overwrite to do so.")
+                    continue
+            # Tag the fetched image with the :local tag
+            _add_local_tag(image_to_fetch, image_registry, local_tag)
+        else:
+            if opts.o.verbose:
+                print(f"Excluding: {container}")
+    if not all_containers_found:
+        print("Warning: couldn't find usable images for one or more containers, this stack will not deploy")

stack_orchestrator/build/publish.py

@@ -0,0 +1,48 @@
+# Copyright © 2024 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+from datetime import datetime
+from python_on_whales import DockerClient
+
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import error_exit
+
+
+def _publish_tag_for_image(local_image_tag: str, remote_repo: str, version: str):
+    # Turns image tags of the form: foo/bar:local into remote.repo/org/bar:deploy
+    (image_name, image_version) = local_image_tag.split(":")
+    if image_version == "local":
+        return f"{remote_repo}/{image_name}:{version}"
+    else:
+        error_exit("Asked to publish a non-locally built image")
+
+
+def publish_image(local_tag, registry):
+    if opts.o.verbose:
+        print(f"Publishing this image: {local_tag} to this registry: {registry}")
+    docker = DockerClient()
+    # Figure out the target image tag
+    # Eventually this version will be generated from the source repo state
+    # Using a timestemp is an intermediate step
+    version = datetime.now().strftime("%Y%m%d%H%M")
+    remote_tag = _publish_tag_for_image(local_tag, registry, version)
+    # Tag the image thus
+    if opts.o.debug:
+        print(f"Tagging {local_tag} to {remote_tag}")
+    docker.image.tag(local_tag, remote_tag)
+    # Push it to the desired registry
+    if opts.o.verbose:
+        print(f"Pushing image {remote_tag}")
+    docker.image.push(remote_tag)

stack_orchestrator/constants.py

@@ -0,0 +1,38 @@
+# Copyright © 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+cluster_name_prefix = "laconic-"
+stack_file_name = "stack.yml"
+spec_file_name = "spec.yml"
+config_file_name = "config.env"
+deployment_file_name = "deployment.yml"
+compose_dir_name = "compose"
+compose_deploy_type = "compose"
+k8s_kind_deploy_type = "k8s-kind"
+k8s_deploy_type = "k8s"
+cluster_id_key = "cluster-id"
+kube_config_key = "kube-config"
+deploy_to_key = "deploy-to"
+network_key = "network"
+http_proxy_key = "http-proxy"
+image_registry_key = "image-registry"
+configmaps_key = "configmaps"
+resources_key = "resources"
+volumes_key = "volumes"
+security_key = "security"
+annotations_key = "annotations"
+labels_key = "labels"
+kind_config_filename = "kind-config.yml"
+kube_config_filename = "kubeconfig.yml"

stack_orchestrator/data/compose/docker-compose-container-registry.yml

@@ -0,0 +1,15 @@
+services:
+  registry:
+    image: registry:2.8
+    restart: always
+    environment:
+      REGISTRY_LOG_LEVEL: ${REGISTRY_LOG_LEVEL}
+    volumes:
+      - config:/config:ro
+      - registry-data:/var/lib/registry
+    ports:
+      - "5000"
+
+volumes:
+  config:
+  registry-data:

stack_orchestrator/data/compose/docker-compose-fixturenet-blast.yml

@@ -0,0 +1,80 @@
+
+# From: https://raw.githubusercontent.com/blast-io/deployment/master/docker-compose.yml
+services:
+  # generate jwt.txt if it's absent
+  generate-jwt:
+    image: blastio/openssl
+    volumes:
+      - blast-data:/blast:rw
+    command: >
+      sh -c "[ ! -f /blast/jwt.txt ] && openssl rand -hex 32 | tr -d '\n' > /blast/jwt.txt || exit 0"
+  # initialise geth db
+  geth-init:
+    image: blastio/blast-geth:${NETWORK:-testnet-sepolia}
+    volumes:
+      - blast-data:/blast:rw
+      - ../config/fixturenet-blast/genesis.json:/blast/genesis.json
+    entrypoint: /bin/sh
+    command: >
+      -c "[ ! -d /blast/${GETH_DATA_DIR:-blast-geth-data}/geth ] && /usr/local/bin/geth init --datadir=/blast/${GETH_DATA_DIR:-blast-geth-data} /blast/genesis.json || exit 0"
+    depends_on:
+      generate-jwt:
+        condition: service_completed_successfully
+    env_file: 
+      - ../config/fixturenet-blast/${NETWORK:-fixturenet}.config
+  blast-geth:
+    image: blastio/blast-geth:${NETWORK:-testnet-sepolia}
+    volumes:
+      - blast-data:/blast
+    ports:
+      - "9545"
+      - "9546"
+    command: >
+      --datadir=/blast/${GETH_DATA_DIR:-blast-geth-data}
+      --http
+      --http.corsdomain="*"
+      --http.vhosts="*"
+      --http.addr=0.0.0.0
+      --http.port=9545
+      --http.api=web3,debug,eth,txpool,net,engine
+      --ws
+      --ws.addr=0.0.0.0
+      --ws.port=9546
+      --ws.origins="*"
+      --ws.api=debug,eth,txpool,net,engine
+      --authrpc.addr="0.0.0.0"
+      --authrpc.port="8551"
+      --authrpc.vhosts="*"
+      --authrpc.jwtsecret=/blast/jwt.txt
+      --syncmode=full
+      --gcmode=archive
+      --nodiscover
+      --maxpeers=0
+      --rollup.disabletxpoolgossip=true
+    env_file: 
+      - ../config/fixturenet-blast/${NETWORK:-fixturenet}.config
+    depends_on:
+      geth-init:
+        condition: service_completed_successfully
+  op-node:
+    image: blastio/blast-optimism:${NETWORK:-testnet-sepolia}
+    volumes:
+      - blast-data:/blast
+      - ../config/fixturenet-blast/rollup.json:/blast/rollup.json
+    ports:
+      - "9003"
+    command: >
+      op-node
+      --l1="${CERC_L1_RPC}"
+      --l1.rpckind="any"
+      --l1.trustrpc=true
+      --l2="http://blast-geth:8551"
+      --l2.jwt-secret=/blast/jwt.txt
+      --rollup.config="/blast/rollup.json"
+    depends_on:
+      - blast-geth
+    env_file: 
+      - ../config/fixturenet-blast/${NETWORK:-fixturenet}.config
+
+volumes:
+  blast-data:

stack_orchestrator/data/compose/docker-compose-fixturenet-laconic-console.yml

@@ -4,6 +4,6 @@ services:
     image: cerc/laconic-console-host:local
     environment:
       - CERC_WEBAPP_FILES_DIR=${CERC_WEBAPP_FILES_DIR:-/usr/local/share/.config/yarn/global/node_modules/@cerc-io/console-app/dist/production}
-      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost}
+      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost:9473}
     ports:
       - "80"

stack_orchestrator/data/compose/docker-compose-fixturenet-laconicd.yml

@@ -3,9 +3,12 @@ services:
     restart: unless-stopped
     image: cerc/laconicd:local
     command: ["sh", "/docker-entrypoint-scripts.d/create-fixturenet.sh"]
+    environment:
+      TEST_AUCTION_ENABLED: ${TEST_AUCTION_ENABLED}
+      TEST_REGISTRY_EXPIRY: ${TEST_REGISTRY_EXPIRY}
     volumes:
       # The cosmos-sdk node's database directory:
-      - laconicd-data:/root/.laconicd/data
+      - laconicd-data:/root/.laconicd
       # TODO: look at folding these scripts into the container
       - ../config/fixturenet-laconicd/create-fixturenet.sh:/docker-entrypoint-scripts.d/create-fixturenet.sh
       - ../config/fixturenet-laconicd/export-mykey.sh:/docker-entrypoint-scripts.d/export-mykey.sh
@@ -25,6 +28,7 @@ services:
     image: cerc/laconic-registry-cli:local
     volumes:
       - ../config/fixturenet-laconicd/registry-cli-config-template.yml:/registry-cli-config-template.yml
+      - ${BASE_DIR:-~/cerc}/laconic-registry-cli:/laconic-registry-cli
 
 volumes:
   laconicd-data:

stack_orchestrator/data/compose/docker-compose-fixturenet-optimism.yml

@@ -6,8 +6,8 @@ services:
   # Deploys the L1 smart contracts (outputs to volume l1_deployment)
   fixturenet-optimism-contracts:
     restart: on-failure
-    hostname: fixturenet-optimism-contracts
     image: cerc/optimism-contracts:local
+    hostname: fixturenet-optimism-contracts
     env_file:
       - ../config/fixturenet-optimism/l1-params.env
     environment:
@@ -17,27 +17,49 @@ services:
       CERC_L1_ACCOUNTS_CSV_URL: ${CERC_L1_ACCOUNTS_CSV_URL}
       CERC_L1_ADDRESS: ${CERC_L1_ADDRESS}
       CERC_L1_PRIV_KEY: ${CERC_L1_PRIV_KEY}
-      CERC_L1_ADDRESS_2: ${CERC_L1_ADDRESS_2}
-      CERC_L1_PRIV_KEY_2: ${CERC_L1_PRIV_KEY_2}
-    # Waits for L1 endpoint to be up before running the script
-    command: |
-      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./run.sh"
     volumes:
       - ../config/network/wait-for-it.sh:/app/packages/contracts-bedrock/wait-for-it.sh
-      - ../config/optimism-contracts/hardhat-tasks/verify-contract-deployment.ts:/app/packages/contracts-bedrock/tasks/verify-contract-deployment.ts
-      - ../config/optimism-contracts/hardhat-tasks/rekey-json.ts:/app/packages/contracts-bedrock/tasks/rekey-json.ts
-      - ../config/optimism-contracts/hardhat-tasks/send-balance.ts:/app/packages/contracts-bedrock/tasks/send-balance.ts
-      - ../config/fixturenet-optimism/optimism-contracts/update-config.js:/app/packages/contracts-bedrock/update-config.js
-      - ../config/fixturenet-optimism/optimism-contracts/run.sh:/app/packages/contracts-bedrock/run.sh
+      - ../config/fixturenet-optimism/optimism-contracts/deploy-contracts.sh:/app/packages/contracts-bedrock/deploy-contracts.sh
       - l2_accounts:/l2-accounts
-      - l1_deployment:/app/packages/contracts-bedrock
+      - l1_deployment:/l1-deployment
+      - l2_config:/l2-config
+    # Waits for L1 endpoint to be up before running the contract deploy script
+    command: |
+      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./deploy-contracts.sh"
+
+  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
+  op-geth:
+    restart: always
+    image: cerc/optimism-l2geth:local
+    hostname: op-geth
+    depends_on:
+      op-node:
+        condition: service_started
+    volumes:
+      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
+      - l2_config:/l2-config:ro
+      - l2_accounts:/l2-accounts:ro
+      - l2_geth_data:/datadir
+    entrypoint: "sh"
+    command: "/run-op-geth.sh"
+    ports:
+      - "8545"
+      - "8546"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost:8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 100
+      start_period: 10s
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Generates the config files required for L2 (outputs to volume l2_config)
-  op-node-l2-config-gen:
-    restart: on-failure
+  # Runs the L2 consensus client (Sequencer node)
+  # Generates the L2 config files if not already present (outputs to volume l2_config)
+  op-node:
+    restart: always
     image: cerc/optimism-op-node:local
+    hostname: op-node
     depends_on:
       fixturenet-optimism-contracts:
         condition: service_completed_successfully
@@ -47,61 +69,19 @@ services:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_L1_RPC: ${CERC_L1_RPC}
     volumes:
-      - ../config/fixturenet-optimism/generate-l2-config.sh:/app/generate-l2-config.sh
-      - l1_deployment:/contracts-bedrock:ro
-      - l2_config:/app
-    command: ["sh", "/app/generate-l2-config.sh"]
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
-  op-geth:
-    restart: always
-    image: cerc/optimism-l2geth:local
-    depends_on:
-      op-node-l2-config-gen:
-        condition: service_started
-    volumes:
-      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
-      - l2_config:/op-node:ro
+      - ../config/fixturenet-optimism/run-op-node.sh:/run-op-node.sh
+      - l1_deployment:/l1-deployment:ro
+      - l2_config:/l2-config
       - l2_accounts:/l2-accounts:ro
-      - l2_geth_data:/datadir
     entrypoint: "sh"
-    command: "/run-op-geth.sh"
+    command: "/run-op-node.sh"
     ports:
-      - "0.0.0.0:8545:8545"
-      - "0.0.0.0:8546:8546"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost:8545"]
-      interval: 30s
-      timeout: 10s
-      retries: 10
-      start_period: 10s
-
-  # Runs the L2 consensus client (Sequencer node)
-  op-node:
-    restart: always
-    image: cerc/optimism-op-node:local
-    depends_on:
-      op-geth:
-        condition: service_healthy
-    env_file:
-      - ../config/fixturenet-optimism/l1-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_L1_RPC: ${CERC_L1_RPC}
-    volumes:
-      - ../config/fixturenet-optimism/run-op-node.sh:/app/run-op-node.sh
-      - l2_config:/op-node-data:ro
-      - l2_accounts:/l2-accounts:ro
-    command: ["sh", "/app/run-op-node.sh"]
-    ports:
-      - "0.0.0.0:8547:8547"
+      - "8547"
     healthcheck:
       test: ["CMD", "nc", "-vz", "localhost:8547"]
       interval: 30s
       timeout: 10s
-      retries: 10
+      retries: 100
       start_period: 10s
     extra_hosts:
       - "host.docker.internal:host-gateway"
@@ -110,6 +90,7 @@ services:
   op-batcher:
     restart: always
     image: cerc/optimism-op-batcher:local
+    hostname: op-batcher
     depends_on:
       op-node:
         condition: service_healthy
@@ -129,7 +110,7 @@ services:
     command: |
       "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-batcher.sh"
     ports:
-      - "127.0.0.1:8548:8548"
+      - "8548"
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
@@ -137,25 +118,29 @@ services:
   op-proposer:
     restart: always
     image: cerc/optimism-op-proposer:local
+    hostname: op-proposer
     depends_on:
       op-node:
         condition: service_healthy
+      op-geth:
+        condition: service_healthy
     env_file:
       - ../config/fixturenet-optimism/l1-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_L1_RPC: ${CERC_L1_RPC}
+      CERC_L1_CHAIN_ID: ${CERC_L1_CHAIN_ID}
     volumes:
       - ../config/network/wait-for-it.sh:/wait-for-it.sh
       - ../config/fixturenet-optimism/run-op-proposer.sh:/run-op-proposer.sh
-      - l1_deployment:/contracts-bedrock:ro
+      - l1_deployment:/l1-deployment:ro
       - l2_accounts:/l2-accounts:ro
     entrypoint: ["sh", "-c"]
     # Waits for L1 endpoint to be up before running the proposer
     command: |
       "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-proposer.sh"
     ports:
-      - "127.0.0.1:8560:8560"
+      - "8560"
     extra_hosts:
       - "host.docker.internal:host-gateway"
 

stack_orchestrator/data/compose/docker-compose-fixturenet-plugeth.yml

@@ -6,6 +6,7 @@ services:
       - ../config/fixturenet-eth/fixturenet-eth.env
     environment:
       RUN_BOOTNODE: "true"
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
     image: cerc/fixturenet-plugeth-plugeth:local
     volumes:
       - fixturenet_plugeth_bootnode_geth_data:/root/ethdata

stack_orchestrator/data/compose/docker-compose-fixturenet-urbit.yml

@@ -0,0 +1,36 @@
+version: '3.7'
+
+services:
+  # Runs an Urbit fake ship and attempts an app installation using given data
+  # Uploads the app glob to given IPFS endpoint
+  # From urbit_app_builds volume:
+  # - takes app build from ${CERC_URBIT_APP}/build (waits for it to appear)
+  # - takes additional mark files from ${CERC_URBIT_APP}/mar
+  # - takes the docket file from ${CERC_URBIT_APP}/desk.docket-0
+  urbit-fake-ship:
+    restart: unless-stopped
+    image: tloncorp/vere
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_URBIT_APP: ${CERC_URBIT_APP}
+      CERC_ENABLE_APP_INSTALL: ${CERC_ENABLE_APP_INSTALL:-true}
+      CERC_IPFS_GLOB_HOST_ENDPOINT: ${CERC_IPFS_GLOB_HOST_ENDPOINT:-http://ipfs:5001}
+      CERC_IPFS_SERVER_ENDPOINT: ${CERC_IPFS_SERVER_ENDPOINT:-http://ipfs:8080}
+    entrypoint: ["bash", "-c", "./run-urbit-ship.sh && ./deploy-app.sh && tail -f /dev/null"]
+    volumes:
+      - urbit_data:/urbit
+      - urbit_app_builds:/app-builds
+      - ../config/urbit/run-urbit-ship.sh:/urbit/run-urbit-ship.sh
+      - ../config/urbit/deploy-app.sh:/urbit/deploy-app.sh
+    ports:
+      - "80"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "80"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+
+volumes:
+  urbit_data:
+  urbit_app_builds:

stack_orchestrator/data/compose/docker-compose-grafana.yml

@@ -0,0 +1,31 @@
+version: "3.7"
+
+services:
+  grafana:
+    image: grafana/grafana:10.2.3
+    restart: always
+    environment:
+      GF_SERVER_ROOT_URL: ${GF_SERVER_ROOT_URL}
+      CERC_GRAFANA_ALERTS_SUBGRAPH_IDS: ${CERC_GRAFANA_ALERTS_SUBGRAPH_IDS}
+    volumes:
+      - ../config/monitoring/grafana/provisioning:/etc/grafana/provisioning
+      - ../config/monitoring/grafana/dashboards:/etc/grafana/dashboards
+      - ../config/monitoring/update-grafana-alerts-config.sh:/update-grafana-alerts-config.sh
+      - grafana_storage:/var/lib/grafana
+    user: root
+    entrypoint: ["bash", "-c"]
+    command: |
+      "/update-grafana-alerts-config.sh && /run.sh"
+    ports:
+      - "3000"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "3000"]
+      interval: 30s
+      timeout: 5s
+      retries: 10
+      start_period: 3s
+
+volumes:
+  grafana_storage:

stack_orchestrator/data/compose/docker-compose-graph-node.yml

@@ -16,8 +16,13 @@ services:
       postgres_pass: password
       postgres_db: graph-node
       ethereum: ${ETH_NETWORKS:-lotus-fixturenet:http://lotus-node-1:1234/rpc/v1}
+      # Env varaibles reference: https://git.vdb.to/cerc-io/graph-node/src/branch/master/docs/environment-variables.md
       GRAPH_LOG: debug
       ETHEREUM_REORG_THRESHOLD: 3
+      GRAPH_ETHEREUM_JSON_RPC_TIMEOUT: ${GRAPH_ETHEREUM_JSON_RPC_TIMEOUT:-180}
+      GRAPH_ETHEREUM_REQUEST_RETRIES: ${GRAPH_ETHEREUM_REQUEST_RETRIES:-10}
+      GRAPH_ETHEREUM_MAX_BLOCK_RANGE_SIZE: ${GRAPH_ETHEREUM_MAX_BLOCK_RANGE_SIZE:-2000}
+      GRAPH_ETHEREUM_BLOCK_INGESTOR_MAX_CONCURRENT_JSON_RPC_CALLS_FOR_TXN_RECEIPTS: ${GRAPH_ETHEREUM_BLOCK_INGESTOR_MAX_CONCURRENT_JSON_RPC_CALLS_FOR_TXN_RECEIPTS:-1000}
     entrypoint: ["bash", "-c"]
     # Wait for ETH RPC endpoint to be up when running with fixturenet-lotus
     command: |
@@ -27,6 +32,7 @@ services:
       - "8001"
       - "8020"
       - "8030"
+      - "8040"
     healthcheck:
       test: ["CMD", "nc", "-vz", "localhost", "8020"]
       interval: 30s