* feat: api: sanity check the "to" address of outgoing messages
If the "to" address of an outgoing message is a _delegated_ address,
verify that it maps to a valid Ethereum address. This isn't a consensus
critical change, but it'll help prevent client-side address conversion
libraries from directing messages into oblivion (e.g., by
mis-translating `0xff0000....` addresses into `f410f...` addresses
instead of `f0...` addresses.
* tests for invalid delegated addresses
* fix lint
---------
Co-authored-by: aarshkshah1992 <aarshkshah1992@gmail.com>
* release: v1.26.3 (#11908) (#11915)
* deps: update dependencies to address migration memory bloat
to address memory concerns during a heavy migration
Ref: https://github.com/filecoin-project/go-state-types/pull/260
Ref: https://github.com/whyrusleeping/cbor-gen/pull/96
Ref: https://github.com/filecoin-project/go-amt-ipld/pull/90
* release: prep v1.26.3 patch
Prep v1.26.3 patch release:
- Update changelog, version and make gen + make docsgen-cli
* deps: update cbor-gen to tagged version
deps: update cbor-gen to tagged version
* deps: update go-state-types to tagged version
deps: update go-state-types to tagged version v0.13.2
* chore: deps: update go-state-types to v0.13.3
Fixes a panic when we have fewer than 1k proposals.
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
* build: release: v1.27.0-rc1 (#11947)
* chore: Set version as v1.27.0-rc1
Set version as v1.27.0-rc1, run make gen & make docsgen-cli
* Update changelog
Update changelog
* Update changelog
Update changelog based on feedback
* Bump pubsub-dep
Bump pubsub-dep
* Prep v1.27.0-rc2
Prep v1.27.0-rc2
* Typo fixes, and more changelog updates
Typo fixes, and more changelog updates
* chore: remove unmaintained bootstrappers (#11983)
* chore: remove unmaintained bootstrappers
chore: remove unmaintained bootstrappers
* Update mainnet.pi fixing typoed domain
fixing typo for 1475.io 'bootstarp' -> 'bootstrap'
* Update mainnet.pi
apparently the actual hostname is typoed. so bootstarp it is.
---------
Co-authored-by: smagdali <stefan@fil.org>
* chore: update go-data-transfer and go-graphsync
* add ETH addrs API to Gateway (#11979)
* fix: copy Flags field from SectorOnChainInfo
Fixes: https://github.com/filecoin-project/lotus/issues/11962
* feat: libp2p: Lotus stream cleanup (#11993)
* set stream deadlines in Lotus
* reduce timeout
* whitelist bootstrappers
* fix tests
* Update changelog and version
Update changelog and version
* ci: deprecate circle ci in favour of github actions (#11786)
* Update changelog
Update changelog with the deprecate circle-ci
* chore: update drand (#12021)
* Update changelog / make docsgen
Update changelog / make docsgen
* chore: lint: update golangci lint config
* remove and replace some linters
* remove some exclusions
* make all exclusions more explicit matches
* chore: lint: fix lint errors with new linting config
Ref: https://github.com/filecoin-project/lotus/issues/11967
* chore: lint: address feedback from reviews
* doc: eth: restore comment lost in linter cleanup
Ref: https://github.com/filecoin-project/lotus/pull/11968
* chore: libp2p: update to v0.34.1 (#12027)
* update libp2p to v0.34.0
* fix libp2p err
* fix imports
* update go mod
* update go mod
* Update changelog
Update changelog
* go mod tidy
go mod tidy
* revert go version change (#12050)
* Update changelog
Update changelog
* chore: backport #12054 to release/v1.27.0 branch (#12056)
* chore: pin golanglint-ci to v1.58.2 (#12054)
Fixes: https://github.com/filecoin-project/lotus/issues/12044
* Add backport to changelog
Add backport to changelog
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* Bump version - make gen/make docsgen
Bump version - make gen/make docsgen
* Update changelog
Update changelog
* Bump NodeBuildVersion to v1.27.1-rc1
Bump NodeBuildVersion to v1.27.1-rc1
* Add Lotus-Miner / Curio related changes
Add Lotus-Miner / Curio related changes
* Update date and upgrade warnings
Update date and upgrade warnings
* fix: ci: do not use deprecated --debug goreleaser flag (#12086)
* chore: deals: remove forgotten graphsync references (#12084)
* chore: types: remove more items forgotten after markets (#12095)
* chore: cleanup: remove more items forgotten after markets
* .gz somehow reappeared after https://github.com/filecoin-project/lotus/pull/11625
* fix: ETH RPC API: ETH Call should use the parent state root of the subsequent tipset (#11905)
* fix eth call
* tests
* changes as per review
* changes as per review
* Update node/impl/full/eth.go
Co-authored-by: Rod Vagg <rod@vagg.org>
* fix as per review
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* Update changelog to RC2
Update changelog to RC2
* Make gen / make docsgen-cli
Make gen / make docsgen-cli
* chore: api: the Net API/CLI now remains only on daemon
The only part of this repository that does lp2p is now lotus-daemon
Remove the CommonNet type, used exclusively bu the CLI stack
Adjust the rest of struct-memebership to match what went where
End result best seen in diff of `documentation/en/api-v0-methods-miner.md`
* Update changelog
Update changelog
* fix: events: sqlite db improvements (#12090)
* fix: events: sqlite db improvements
* fix unclosed multi-row query
* tune options to limit wal growth
Ref: https://github.com/filecoin-project/lotus/issues/12089
* fix: events: use correct context for CollectEvents transaction
* fix: events: close prepared read statement
* fix: events: close initial query; handle lint failures
* Update CHANGELOG.md
* build: release: v1.27.1-rc2 (#12101)
* fix: ci: do not use deprecated --debug goreleaser flag (#12086)
* chore: deals: remove forgotten graphsync references (#12084)
* chore: types: remove more items forgotten after markets (#12095)
* chore: cleanup: remove more items forgotten after markets
* .gz somehow reappeared after https://github.com/filecoin-project/lotus/pull/11625
* fix: ETH RPC API: ETH Call should use the parent state root of the subsequent tipset (#11905)
* fix eth call
* tests
* changes as per review
* changes as per review
* Update node/impl/full/eth.go
Co-authored-by: Rod Vagg <rod@vagg.org>
* fix as per review
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* Update changelog to RC2
Update changelog to RC2
* Make gen / make docsgen-cli
Make gen / make docsgen-cli
* chore: api: the Net API/CLI now remains only on daemon
The only part of this repository that does lp2p is now lotus-daemon
Remove the CommonNet type, used exclusively bu the CLI stack
Adjust the rest of struct-memebership to match what went where
End result best seen in diff of `documentation/en/api-v0-methods-miner.md`
* Update changelog
Update changelog
* fix: events: sqlite db improvements (#12090)
* fix: events: sqlite db improvements
* fix unclosed multi-row query
* tune options to limit wal growth
Ref: https://github.com/filecoin-project/lotus/issues/12089
* fix: events: use correct context for CollectEvents transaction
* fix: events: close prepared read statement
* fix: events: close initial query; handle lint failures
* Update CHANGELOG.md
---------
Co-authored-by: Piotr Galar <piotr.galar@gmail.com>
Co-authored-by: Peter Rabbitson <ribasushi@protocol.ai>
Co-authored-by: Aarsh Shah <aarshkshah1992@gmail.com>
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Peter Rabbitson <ribasushi@leporine.io>
* small fix in changelog
* fix: release: update goreleaser config file
Fixes: https://github.com/filecoin-project/lotus/issues/12120
* fix go releaser and test with rc3
* Update CHANGELOG.md
* lotus v1.27.1 prep
* address review
- resolve one more conflicts
- revert 2 new line added
* doc: events: note events db migration impact
---------
Co-authored-by: Phi-rjan <orjan.roren@gmail.com>
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
Co-authored-by: smagdali <stefan@fil.org>
Co-authored-by: Aarsh Shah <aarshkshah1992@gmail.com>
Co-authored-by: Piotr Galar <piotr.galar@gmail.com>
Co-authored-by: Peter Rabbitson <ribasushi@protocol.ai>
Co-authored-by: Peter Rabbitson <ribasushi@leporine.io>
* feat: ci: control the use of self-hosted runners with CUSTOM_RUNNERS_ENABLED configuration variable
* Revert "feat: ci: control the use of self-hosted runners with CUSTOM_RUNNERS_ENABLED configuration variable"
This reverts commit adf5f3d2cb46e0415f0da90a52bbb1ba73879025.
* chore: ci: use self-hosted runners in the original repo or any fork inside the filecoin-project org
* add support for eth_getBlockByNumber to accept the term safe which we are using as 30 blocks
* fix lint catch of unnecessary cast
* add finalized to get block by number
* Update chain/types/ethtypes/eth_types.go
Co-authored-by: Rod Vagg <rod@vagg.org>
* add test for eth get block by number to accept latest and safe and finalized as arguments
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* record seen event epochs
* create correct index
* migrate to version 6
* fix typo
* test both conditions
* changes as per review
* record reverted tipsets
* see if tipsets has events and has not been reverted
* sub/unsub tipset updates from the index
* eth_get_logs should wait for events
* fix naming
* changes as per review
* solve issue with missing events
* use correct var
* changes as per review
* add unique constraint
* fix test wait
* check for events at min_height as well
* Apply suggestions from code review
Co-authored-by: Rod Vagg <rod@vagg.org>
* reduce duplication
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* fix: ci: do not use deprecated --debug goreleaser flag (#12086)
* chore: deals: remove forgotten graphsync references (#12084)
* chore: types: remove more items forgotten after markets (#12095)
* chore: cleanup: remove more items forgotten after markets
* .gz somehow reappeared after https://github.com/filecoin-project/lotus/pull/11625
* fix: ETH RPC API: ETH Call should use the parent state root of the subsequent tipset (#11905)
* fix eth call
* tests
* changes as per review
* changes as per review
* Update node/impl/full/eth.go
Co-authored-by: Rod Vagg <rod@vagg.org>
* fix as per review
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* Update changelog to RC2
Update changelog to RC2
* Make gen / make docsgen-cli
Make gen / make docsgen-cli
* chore: api: the Net API/CLI now remains only on daemon
The only part of this repository that does lp2p is now lotus-daemon
Remove the CommonNet type, used exclusively bu the CLI stack
Adjust the rest of struct-memebership to match what went where
End result best seen in diff of `documentation/en/api-v0-methods-miner.md`
* Update changelog
Update changelog
* fix: events: sqlite db improvements (#12090)
* fix: events: sqlite db improvements
* fix unclosed multi-row query
* tune options to limit wal growth
Ref: https://github.com/filecoin-project/lotus/issues/12089
* fix: events: use correct context for CollectEvents transaction
* fix: events: close prepared read statement
* fix: events: close initial query; handle lint failures
* Update CHANGELOG.md
---------
Co-authored-by: Piotr Galar <piotr.galar@gmail.com>
Co-authored-by: Peter Rabbitson <ribasushi@protocol.ai>
Co-authored-by: Aarsh Shah <aarshkshah1992@gmail.com>
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Peter Rabbitson <ribasushi@leporine.io>
* Building_a_network_skeleton.md cleanups
Go-State-Types Checklist updates
* Updated Lotus PR to the one that was merged for nv23
* Made network version substitute variable to consistently be "xx" instead of 3 or more "x"'s in some cases.
Adjusted ToC.
* Leaving ToC untouched
* Building_a_network_skeleton.md cleanups
Go-State-Types Checklist updates
* Made network version substitute variable to consistently be "xx" instead of 3 or more "x"'s in some cases.
Adjusted ToC.
* Leaving ToC untouched
* Building_a_network_skeleton.md cleanups
Go-State-Types Checklist updates
* Made network version substitute variable to consistently be "xx" instead of 3 or more "x"'s in some cases.
Adjusted ToC.
The only part of this repository that does lp2p is now lotus-daemon
Remove the CommonNet type, used exclusively bu the CLI stack
Adjust the rest of struct-memebership to match what went where
End result best seen in diff of `documentation/en/api-v0-methods-miner.md`
* fix eth call
* tests
* changes as per review
* changes as per review
* Update node/impl/full/eth.go
Co-authored-by: Rod Vagg <rod@vagg.org>
* fix as per review
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
The only part of this repository that does lp2p is now lotus-daemon
Remove the CommonNet type, used exclusively bu the CLI stack
Adjust the rest of struct-memebership to match what went where
End result best seen in diff of `documentation/en/api-v0-methods-miner.md`
* move some utility methods into UnmanagedMiner so they can be used from other itests
* make UnmanagedMiner aware of mock proofs so we can remove a lot of branching
* fix eth call
* tests
* changes as per review
* changes as per review
* Update node/impl/full/eth.go
Co-authored-by: Rod Vagg <rod@vagg.org>
* fix as per review
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* release: v1.26.3 (#11908) (#11915)
* deps: update dependencies to address migration memory bloat
to address memory concerns during a heavy migration
Ref: https://github.com/filecoin-project/go-state-types/pull/260
Ref: https://github.com/whyrusleeping/cbor-gen/pull/96
Ref: https://github.com/filecoin-project/go-amt-ipld/pull/90
* release: prep v1.26.3 patch
Prep v1.26.3 patch release:
- Update changelog, version and make gen + make docsgen-cli
* deps: update cbor-gen to tagged version
deps: update cbor-gen to tagged version
* deps: update go-state-types to tagged version
deps: update go-state-types to tagged version v0.13.2
* chore: deps: update go-state-types to v0.13.3
Fixes a panic when we have fewer than 1k proposals.
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
* build: release: v1.27.0-rc1 (#11947)
* chore: Set version as v1.27.0-rc1
Set version as v1.27.0-rc1, run make gen & make docsgen-cli
* Update changelog
Update changelog
* Update changelog
Update changelog based on feedback
* Bump pubsub-dep
Bump pubsub-dep
* Prep v1.27.0-rc2
Prep v1.27.0-rc2
* Typo fixes, and more changelog updates
Typo fixes, and more changelog updates
* chore: remove unmaintained bootstrappers (#11983)
* chore: remove unmaintained bootstrappers
chore: remove unmaintained bootstrappers
* Update mainnet.pi fixing typoed domain
fixing typo for 1475.io 'bootstarp' -> 'bootstrap'
* Update mainnet.pi
apparently the actual hostname is typoed. so bootstarp it is.
---------
Co-authored-by: smagdali <stefan@fil.org>
* chore: update go-data-transfer and go-graphsync
* add ETH addrs API to Gateway (#11979)
* fix: copy Flags field from SectorOnChainInfo
Fixes: https://github.com/filecoin-project/lotus/issues/11962
* feat: libp2p: Lotus stream cleanup (#11993)
* set stream deadlines in Lotus
* reduce timeout
* whitelist bootstrappers
* fix tests
* Update changelog and version
Update changelog and version
* ci: deprecate circle ci in favour of github actions (#11786)
* Update changelog
Update changelog with the deprecate circle-ci
* chore: update drand (#12021)
* Update changelog / make docsgen
Update changelog / make docsgen
* chore: lint: update golangci lint config
* remove and replace some linters
* remove some exclusions
* make all exclusions more explicit matches
* chore: lint: fix lint errors with new linting config
Ref: https://github.com/filecoin-project/lotus/issues/11967
* chore: lint: address feedback from reviews
* doc: eth: restore comment lost in linter cleanup
Ref: https://github.com/filecoin-project/lotus/pull/11968
* chore: libp2p: update to v0.34.1 (#12027)
* update libp2p to v0.34.0
* fix libp2p err
* fix imports
* update go mod
* update go mod
* Update changelog
Update changelog
* go mod tidy
go mod tidy
* revert go version change (#12050)
* Update changelog
Update changelog
* chore: backport #12054 to release/v1.27.0 branch (#12056)
* chore: pin golanglint-ci to v1.58.2 (#12054)
Fixes: https://github.com/filecoin-project/lotus/issues/12044
* Add backport to changelog
Add backport to changelog
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* Fix where #12054 is placed in changelog
Fix where #12054 is placed in changelog
* Add trailing line in Makefile
Add trailing line in Makefile
* Go mod tidy
Go mod tidy
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
Co-authored-by: smagdali <stefan@fil.org>
Co-authored-by: Aarsh Shah <aarshkshah1992@gmail.com>
Co-authored-by: Piotr Galar <piotr.galar@gmail.com>
* changelog for trace_transaction
* adding boilerplate for trace_transaction to /api/
* add eth trace transaction proxy and mock api
* trace tx boilerplate
* trace transaction implementation - under construction
* fix types for eth trace transaction
* trace_transaction implemented
* golint and handle transaction not found
* gofmt
* ran make docsgen
* pointer bugfix and make docsgen
* tx.BlockNumber is nil when the transaction is still in the mpool/pending and there is no trace for pending transactions
* check eth trace transaction happy case and two error cases - tx not found and tx pending in itests
* simplify error msg check for gh action fail
---------
Co-authored-by: Michael Seiler <michaelseiler@Michaels-Laptop.local>
* remove client CLI
* remove markets CLI from miner
* remove markets from all CLI
* remove client API
* update go mod
* remove EnableMarkets flag
* remove market subsystem
* remove dagstore
* remove index provider
* remove graphsync and data-transfer
* remove markets
* go mod tidy
* fix cbor gen deps
* remove deal making from config
* remove eol alert
* go mod tidy
* changes as per review
* make jen
* changes as per review
* test: actors: manual CC onboarding and proving integration test
* test: actors: manual CC onboarding itest with real proofs
* test: actors: fix lint issue, require proofs in CI
* test: actors: rename real proofs test, fix dispute window wait
* feat: add TestUnmanagedMiner in the itest kit for non-storage managed miners
* feat: test: improve UnmanagedMiner test harness
* feat: test: MineBlocksMustPost can watch for >1 miners (#12063)
* feat: test: MineBlocksMustPost can watch for >1 miners
* feat: test: wait for both sectors at the end of test
* feat: test: minor manual onboarding test fixups and speed up
* feat: test: handle case where miners have close deadline ends
* Implement snap deals test for manual sector onboarding (#12066)
* changes as per review
* thread safety
* test for snap deals
* remove extraneous change
* Apply suggestions from code review
Co-authored-by: Rod Vagg <rod@vagg.org>
* cancel CC Post after snap deals
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* fix config
---------
Co-authored-by: aarshkshah1992 <aarshkshah1992@gmail.com>
* remove client CLI
* remove markets CLI from miner
* remove markets from all CLI
* remove client API
* update go mod
* remove EnableMarkets flag
* remove market subsystem
* remove dagstore
* remove index provider
* remove graphsync and data-transfer
* remove markets
* go mod tidy
* fix cbor gen deps
* remove deal making from config
* remove eol alert
* go mod tidy
* changes as per review
* make jen
* changes as per review
* merge master
* remove libp2p from config
* miner does not have libp2p conn in api test
* poc for eth legacy tx
* print statements
* finished
* tests work
* remove print statements
* Remove all print statements
* remove extraneous changes
* cleaned up code and interface
* run make jen
* dont duplicate signature
* go mod tidy and remove prints
* clean up tests
* test for conversion
* changes as per review
* more unit tests for legacy txns
* Apply suggestions from code review
Co-authored-by: Rod Vagg <rod@vagg.org>
* address review comments from Rodd
* changes as per zen's 2nd review
* go mod tidy
* feat: ETH compatibility in Filecoin : Support EIP-155 Ethereum transactions in Filecoin (#11970)
* itests passing for 155 tx
* first working version for EIP-155 transactions
* green itest
* add docs
* tests
* remove print stmt
* remove print stmt
* validate signature
* changes as per zen's review
* correct signature verification
* gate tx by Network Version
* handle arajsek review
* fix imports order
* fix lint
* dont lock in mpool for network gating ETH messages
* sender can be an ID address
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
* started
* so far so good
* builds and looks good
* changing level of abstration. some work remains
* it builds
* betterment
* import order
* 2
* stupid linter - you can cast a nil
* build commit and date
* nicer
* tmp and nide makefile
* comments handled
* oops
* added debug and reg
* ffiselect: change err encode to strings, fix some bugs
* ffiselect: Wrap rust logs into go-log
* ffiselect: Make the linter happy
* verification tests
* ffiselect: Fix startup
---------
Co-authored-by: Łukasz Magiera <magik6k@gmail.com>
* ci: keep lotus checkout clean in the release workflow
* ci: allow providing custom ref to the release workflow
* ci: fix version check performed during the release
* ci: fix install go step of the release workflow
* ci: fix the working directory for the install go step in release workflow
* ci: provide github ref to lotus scripts explicitly
* ci: use actions from the chosen ref in release workflow
* ci: fix install go in release workflow
* ci: fix artifact upload in release workflow
* ci: set INPUTS_REF variable in release workflow
* ci: fix publish checksums script
* ci: allow releasing docker from an arbitrary ref
* ci: fix docker channel discovery
* Ignore market balance after nv23
* Review Response and failing test
* Fixes
* Test passing
* Bump up threshold
---------
Co-authored-by: zenground0 <ZenGround0@users.noreply.github.com>
* feat: curio: Migrate lotus-miner sector metadata into Curio DB
* curio seal: Transfer seal pipeline entries to long-term sector metadata table
* curio: Only open db in sectors migrate cmd
* curio: Add an envvar to force migration
* curio: Debugging sector migration
* curio: Fix typo in table name
* curio: Plumb KeepUnsealed into the sealing pipeline
* Don't add redundant keep_data to sdr pipeline pieces table
* fix transferFinalizedSectorData where check
* ui for sector fail
---------
Co-authored-by: Andrew Jackson (Ajax) <snadrus@gmail.com>
* Use local GST
Use local GST
* Import actors and define upgrade heights
Creatin a mock actor-bundle and define upgrade heights
* Generate adapters
Updates gen/inlinegen-data.json, and runs make actors-gen
* Add schedule and migration
Add schedule and migration
* Add upgrade and network version fields/params
Add upgrade and network version fields/params
* Run make gen / make docsgen-cli
Run make gen / make docsgen-cli
* Update filecoin-ffi
Update filecoin-ffi to the v1.28.0-dev tag, which supports the nv23 skeleton.
* Update GST to v0.14.0-dev
Update GST to v0.14.0-dev, which includes the nv23 skeleton
* Add support for actor version 14 in actor registry
Add support for actor version 14 in actor registry
* fix: curio: Update pgx imports, fix db_storage alloc
* feat: curioweb: Improve task_history indexes (#11911)
* 1
* relatable
* add and delete layer
* chore: curio: merge master (#11956)
* Fixing dead links (#11907)
* ci: ci: create gh workflow that updates sorted pr checks (#11861)
* ci: create gh workflow that updates sorted pr checks
* ci: use grouped_by_result template for pr checks sticky comment
* chore: apply pr review suggestion
* Avoid cfg lookup on chain remove since unenabled splitstore delete is noop anyway (#11916)
Co-authored-by: zenground0 <ZenGround0@users.noreply.github.com>
* Fix mismatched method names in comments (#11913)
Signed-off-by: forcedebug <forcedebug@outlook.com>
* release: v1.26.3 (#11908) (#11915) (#11922)
* deps: update dependencies to address migration memory bloat
to address memory concerns during a heavy migration
Ref: https://github.com/filecoin-project/go-state-types/pull/260
Ref: https://github.com/whyrusleeping/cbor-gen/pull/96
Ref: https://github.com/filecoin-project/go-amt-ipld/pull/90
* release: prep v1.26.3 patch
Prep v1.26.3 patch release:
- Update changelog, version and make gen + make docsgen-cli
* deps: update cbor-gen to tagged version
deps: update cbor-gen to tagged version
* deps: update go-state-types to tagged version
deps: update go-state-types to tagged version v0.13.2
* chore: deps: update go-state-types to v0.13.3
Fixes a panic when we have fewer than 1k proposals.
---------
Co-authored-by: Phi-rjan <orjan.roren@gmail.com>
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
* Refactor `LookupID*` APIs in `StateManager` and `StateTree`
The naming of `LookupID` can cause confusion when resolving actor IDs vs
ID addresses. To avoid this:
* Refactor `StateTree` `LookupID` to `LookupIDAddress`, because it
returns ID address.
* Refactor `StateManager` `LookupID` to
`LookupIDAddress` because it also returns ID address via a chain call to
`StateTree`.
* Introduce a new API `StateManager` dedicated to resolving address to
actor ID, called `LookupID` which returns `abi.ActorID`.
For context, see:
* https://github.com/filecoin-project/lotus/pull/11723#discussion_r1534728607
* Add v13 support to invariants-checker (#11931)
Add v13 support to invariants-checker
* chore: docs: nv-skeleton documentation (#11065)
* nv-skeleton documentation
Add a tutorial for how one can create a nv-skeleton in Lotus
* Add footnote for `Add migration` step
Add footnote for `Add migration` step
* Indent migration-code
Indent migration-code to make it show properly as a footnote.
* Add ref-fvm and filecoin-ffi checklist
Add ref-fvm and filecoin-ffi checklist
* Add Filecoin-FFI steps
Add Filecoin-FFI steps
* Add step to params_butterfly.go
Add step to params_butterfly.go
* Fix typo
Fix typo
* Add links to reference PRs
Add links to reference PRs
* Update ref-fvm list
Update ref-fvm list
* feat: curio: add StorageInit api (#11918)
* feat: add StorageInit api
* remove unused variables
* fix gen check
* feat: curio: simpler reservation release logic (#11900)
* simpler release logic
* oops, plus simpler
* simpler
* fix NewLine (#11893)
* fix(events): check for sync-in-progress (#11932)
* feat(events): adjust indexes in event index db to match query patterns
Introduces a v4 migration that just adjusts indexes.
Copies some improvements from https://github.com/filecoin-project/lotus/pull/11723
Closes: https://github.com/filecoin-project/lotus/issues/11909
* fix(pipeline): should return if error occurred when get network version (#11902)
* fix(events): correct log msg for v4 events index db migration
* chore: remove duplicate words in strings and comments
* fix(events): register events index db migration v4
* fix: curio seal: Failed commit retry strategy (#11870)
* ffi: improved-error-handling
* curio seal: Failed commit retry strategy
* use master ffi
* mod tidy
* fix: curio: Update pgx imports, fix db_storage alloc
* feat: curioweb: Improve task_history indexes (#11911)
* mod tidy
* Event index should be unique for tipsets (#11952)
* event index should be unique for tipsets
* fix formatting
* migrate to version 5
* chore: bump build version in master (#11946)
* Bump version
Bump version in master branch in preperation for cutting v1.27.0-rc1
* chore: bump build-version
chore: bump build-version
* feat: curioweb: Show piece info on the sector page (#11955)
* curio: feat: break trees task into TreeD(prefetch) and TreeRC (#11895)
* break trees task
* fix TreeD reservation
* fix nil pointer err
* apply suggestions
* fix allocate file types
* fix dbIndex inserts
* set resource, move release func
* refactor func(), update memory
* remove extra release
---------
Signed-off-by: forcedebug <forcedebug@outlook.com>
Co-authored-by: parthshah1 <parthhshah171@gmail.com>
Co-authored-by: Piotr Galar <piotr.galar@gmail.com>
Co-authored-by: ZenGround0 <5515260+ZenGround0@users.noreply.github.com>
Co-authored-by: zenground0 <ZenGround0@users.noreply.github.com>
Co-authored-by: forcedebug <167591285+forcedebug@users.noreply.github.com>
Co-authored-by: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
Co-authored-by: Phi-rjan <orjan.roren@gmail.com>
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
Co-authored-by: Masih H. Derkani <m@derkani.org>
Co-authored-by: Lee <octalgah@gmail.com>
Co-authored-by: Andrew Jackson (Ajax) <snadrus@gmail.com>
Co-authored-by: beck <34204218+beck-8@users.noreply.github.com>
Co-authored-by: 0x5459 <0x5459@protonmail.com>
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
Co-authored-by: Łukasz Magiera <magik6k@gmail.com>
Co-authored-by: Aarsh Shah <aarshkshah1992@gmail.com>
* linter oops
* gen cleanup
* fix
* named returns are confusing
---------
Signed-off-by: forcedebug <forcedebug@outlook.com>
Co-authored-by: Łukasz Magiera <magik6k@gmail.com>
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
Co-authored-by: LexLuthr <88259624+LexLuthr@users.noreply.github.com>
Co-authored-by: parthshah1 <parthhshah171@gmail.com>
Co-authored-by: Piotr Galar <piotr.galar@gmail.com>
Co-authored-by: ZenGround0 <5515260+ZenGround0@users.noreply.github.com>
Co-authored-by: zenground0 <ZenGround0@users.noreply.github.com>
Co-authored-by: forcedebug <167591285+forcedebug@users.noreply.github.com>
Co-authored-by: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
Co-authored-by: Phi-rjan <orjan.roren@gmail.com>
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
Co-authored-by: Masih H. Derkani <m@derkani.org>
Co-authored-by: Lee <octalgah@gmail.com>
Co-authored-by: beck <34204218+beck-8@users.noreply.github.com>
Co-authored-by: 0x5459 <0x5459@protonmail.com>
Co-authored-by: Aarsh Shah <aarshkshah1992@gmail.com>
* chore: Set version as v1.27.0-rc1
Set version as v1.27.0-rc1, run make gen & make docsgen-cli
* Update changelog
Update changelog
* Update changelog
Update changelog based on feedback
* nv-skeleton documentation
Add a tutorial for how one can create a nv-skeleton in Lotus
* Add footnote for `Add migration` step
Add footnote for `Add migration` step
* Indent migration-code
Indent migration-code to make it show properly as a footnote.
* Add ref-fvm and filecoin-ffi checklist
Add ref-fvm and filecoin-ffi checklist
* Add Filecoin-FFI steps
Add Filecoin-FFI steps
* Add step to params_butterfly.go
Add step to params_butterfly.go
* Fix typo
Fix typo
* Add links to reference PRs
Add links to reference PRs
* Update ref-fvm list
Update ref-fvm list
The naming of `LookupID` can cause confusion when resolving actor IDs vs
ID addresses. To avoid this:
* Refactor `StateTree` `LookupID` to `LookupIDAddress`, because it
returns ID address.
* Refactor `StateManager` `LookupID` to
`LookupIDAddress` because it also returns ID address via a chain call to
`StateTree`.
* Introduce a new API `StateManager` dedicated to resolving address to
actor ID, called `LookupID` which returns `abi.ActorID`.
For context, see:
* https://github.com/filecoin-project/lotus/pull/11723#discussion_r1534728607
* deps: update dependencies to address migration memory bloat
to address memory concerns during a heavy migration
Ref: https://github.com/filecoin-project/go-state-types/pull/260
Ref: https://github.com/whyrusleeping/cbor-gen/pull/96
Ref: https://github.com/filecoin-project/go-amt-ipld/pull/90
* release: prep v1.26.3 patch
Prep v1.26.3 patch release:
- Update changelog, version and make gen + make docsgen-cli
* deps: update cbor-gen to tagged version
deps: update cbor-gen to tagged version
* deps: update go-state-types to tagged version
deps: update go-state-types to tagged version v0.13.2
* chore: deps: update go-state-types to v0.13.3
Fixes a panic when we have fewer than 1k proposals.
---------
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Steven Allen <steven@stebalien.com>
* paths: Debugging local storage reservations
* paths: Log when individual reservation is less than on-disk space
* paths: fix debug reservations print
* paths: More reserve logs
* paths: More more reserve logs
* paths: add stacks to duplicate done call log
* curio: task storage: Release storage at most once
* curio: cleanup before restarting sdr
* address review
* paths: Simplify reservation release logic
This is showing up in profiles so I figured I'd optimize it a bit:
1. Avoid holding locks while recording metrics.
2. Slightly reduce allocations by re-using the metrics "mutators".
Also, use the passed context for better tracing.
This is unlikely to make a huge difference, but it may help RPC
providers a _tiny_ bit and doesn't really move the complexity needle.
In https://github.com/filecoin-project/lotus/issues/11703, a user came across an edge case where an SP:
1. Submitted a bad PoSt.
2. Terminated their sectors.
3. Withdrew all funds (after paying all fees).
This left the SP's miner actor with a bad proof but without any funds to pay for disputes. On the other hand, given that the sectors have been terminated and termination fees were already paid we don't really care about fining the SP for the bad proofs anyways.
But... we still don't want to submit dispute messages in this case because doing so isn't free and doesn't really serve a purpose.
So add a check to fetch miner wallet balance and only send disputing messages if balance is non zero.
fixes https://github.com/filecoin-project/lotus/issues/11715
Eth subscribe tipsets API should only return tipsets that have been executed.
We do this by only returning the parent tipset of the latest tipset received by ETH Subscribe from it's TipSetFilter subscription.
Closes#11807
Subsumes #11816
* Unset env-var for TestForkPreMigration
Unset LOTUS_DISABLE_PRE_MIGRATIONS env-var for TestForkPreMigration test, so it does not hang
* Err-check to make lint happy
Err-check to make lint happy
The correct name for this field is 'input' according to the Ethereum specs [0].
However, for the longest time, clients have been using 'data' and servers have been
lenient to accept both, preferring 'input' over 'data' when both appear.
Our lack of support for 'input' had gone unnoticed until go-ethereum decided
to adjust their ethclient implementation to issue eth_call and eth_estimateGas
requests with the 'input' field instead of 'data' [1]. This suddenly broke apps
using this client against Lotus' Eth API.
[0]: https://github.com/ethereum/execution-apis/blob/main/src/schemas/transaction.yaml#L33-L35
[1]: ethereum/go-ethereum#28078
Co-authored-by: raulk <raul.kripalani@gmail.com>
* ci: rename install ubuntu deps to install system dependencies
* ci: migrate the release workflow to github actions
* ci: set permissions required by the newly added workflows explicitly
* ci: prevent duplicate release and docker publishing
* ci: trigger docker workflow on push to master
* ci: do not pass tokens to goreleaser on dry release runs
* ci: specify higher permissions on a job level
* ci: create gh action that installs go from go.mod
* ci: create gh action that installs ubuntu dependencies
* ci: create gh action that starts yugabyte db
* ci: create gh workflow that runs go tests
* ci: test the test workflow
* ci: delete duplicate line from runner configuration
* Revert "ci: test the test workflow"
This reverts commit d1da190c375f7104dc1f5151b6f2e8c405d1fb82.
* ci: match the circleci runners more accurately
* ci: fetch all filecoin-ffi dependencies
* ci: rename fetch/install job to cache to better match underlying tasks
* ci: set permissions required by the test workflow explicitly
* ci: create gh action that installs go from go.mod
* ci: create gh action that installs ubuntu dependencies
* ci: create gh workflow that runs go checks
* ci: test the check workflow
* Revert "ci: test the check workflow"
This reverts commit 1d0759d3c69eae99d17c5a80470b7a40d5b3bc94.
* ci: create gh action that installs go from go.mod
* ci: create gh action that installs ubuntu dependencies
* ci: create gh workflow that runs go build
* ci: test the build workflow
* Revert "ci: test the build workflow"
This reverts commit 8150510aae4d6d1fb1d719e2d69057a3c0695d32.
* shed: Add v13 migration to migrate-state
* shed: some ADL tools, update GST
* shed: diff hamt address mode
* shed migration debug tooling
* shed migration: market diff on error
* shed: Fix cached migration diff
* shed: Diff deal states on bad migration
* shed: Use std json
* shed: Drill in the migration diff more
* shed: Show proposals in migration market diff
* shed: Show added provider sectors diff
* shed: hamts are hard to use
* update gst
* update gst
* update gst
* update GST with fixed invartiant
* go mod tidy
Codec != Raw likely means built-in actor events, which we can safely skip, so
avoid filling up logs with warnings for every built-in actor event that comes
past this point.
Fixes: https://github.com/filecoin-project/lotus/issues/11718
This is done with the intention to add new {Get,Subscribe}ActorEvents in a
future release (i.e. soon!) with both decoded values (dag-json represented)
and simplified (no flags or codec). But because this comes with some
trade-offs wrt fidelity of information (e.g. likely needing to drop events with
badly encoded values, and not retaining original codec), we need to also have
a Raw form of these APIs for consumers that want to take on the burden of
consuming them as they are.
- Pulls in the latest version of `kubo-api-client` (extracted from kubo
0.27.0).
- Update go-libp2p to v0.33.0
- Update boxo to v0.18.0
- Update go-graphsync to v0.16.0
Now that 1.22 is out. Libp2p will also be dropping support for 1.20
soon (if it hasn't already?) so it can _finally_ stop supporting
specific compiler versions (we can stop caring so much about the
"maximum" supported go version).
Closes: https://github.com/filecoin-project/lotus/issues/11679
* Introduce a `moved:"To.New.Config"` tag which prints a stderr warning when
you use one of these, but will move any set value to the new location if the
new location isn't already set itself.
* Look for `X is DEPRECATED` to hold certain fields back from documentation.
* Use `toml:"omitempty"` to prevent the default config output from having these
deprecated values.
- For sanity reverting the mainnet upgrade epoch to 99999999, and then only set it when cutting the final release
-Update Calibnet CIDs to v13.0.0-rc3
- Add GetActorEvents, SubscribeActorEvents, GetAllClaims and GetAllAllocations methods to the changelog
Co-Authored-By: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
Use the functionalities already provided by `testify` to assert eventual
conditions, and remove the use of `time.Sleep`.
Remove duplicate code in utility functions that are already defined.
Refactor assertion helper functions to use consistent terminology:
"require" implies fatal error, whereas "assert" implies error where the
test may proceed executing.
Use a fresh context to remove the temporary filter installed solely to
get the actor events. This should reduce chances of failure in a case
where the original context may be expired/cancelled.
Refactor removal into a `defer` statement for a more readable, concise
return statement.
Refactor `map` usage for actor event table tests to ensure deterministic
test execution order, making debugging potential issues easier. If
non-determinism is a target, leverage Go's built-in parallel testing
capabilities.
Use BlockDelay as the window for receiving events on the SubscribeActorEvents
channel. We expect the user to have received the initial batch of historical
events (if any) in one block's time. For real-time events we expect them to
not fall behind by roughly one block's time.
* feat: api: improve the correctness of Eth's trace_block (#11609)
* Improve the correctness of Eth's trace_block
- Improve encoding/decoding of parameters and return values:
- Encode "native" parameters and return values with Solidity ABI.
- Correctly decode parameters to "create" calls.
- Use the correct (ish) output for "create" calls.
- Handle all forms of "create".
- Make robust with respect to reverts:
- Use the actor ID/address from the trace instead of looking it up in
the state-tree (may not exist in the state-tree due to a revert).
- Gracefully handle failed actor/contract creation.
- Improve performance:
- We avoid looking anything up in the state-tree when translating the
trace, which should significantly improve performance.
- Improve code readability:
- Remove all "backtracking" logic.
- Use an "environment" struct to store temporary state instead of
attaching it to the trace.
- Fix random bugs:
- Fix an allocation bug in the "address" logic (need to set the
capacity before modifying the slice).
- Improved error checking/handling.
- Use correct types for `trace_block` action/results (create, call, etc.).
- And use the correct types for Result/Action structs instead of reusing the same "Call" action every time.
- Improve error messages.
* Make gen
Make gen
---------
Co-authored-by: Steven Allen <steven@stebalien.com>
* new verireg methods
* update changelog and add itest
* update itest and cli
* update new method's support till v9
* remove gateway APIs
* fix cli internal var names
* Initial work supporting DDO pieces in lotus-miner
* sealing: Update pipeline input to operate on UniversalPiece
* sealing: Update pipeline checks/sealing states to operate on UniversalPiece
* sealing: Make pipeline build with UniversalPiece
* move PieceDealInfo out of api
* make gen
* make sealing pipeline unit tests pass
* fix itest ensemble build
* don't panic in SectorsStatus with deals
* stop linter from complaining about checkPieces
* fix sector import tests
* mod tidy
* sealing: Add logic for (pre)committing DDO sectors
* sealing: state-types with method defs
* DDO non-snap pipeline works(?), DDO Itests
* DDO support in snapdeals pipeline
* make gen
* update actor bundles
* update the gst market fix
* fix: chain: use PreCommitSectorsBatch2 when setting up genesis
* some bug fixes
* integration working changes
* update actor bundles
* Make TestOnboardRawPieceSnap pass
* Appease the linter
* Make deadlines test pass with v12 actors
* Update go-state-types, abstract market DealState
* make gen
* mod tidy, lint fixes
* Fix some more tests
* Bump version in master
Bump version in master
* Make gen
Make gen
* fix sender
* fix: lotus-provider: Fix winning PoSt
* fix: sql Scan cannot write to an object
* Actually show miner-addrs in info-log
Actually show miner-addrs in lotus-provider info-log
* [WIP] feat: Add nv22 skeleton
Addition of Network Version 22 skeleton
* update FFI
* ddo is now nv22
* make gen
* temp actor bundle with ddo
* use working go-state-types
* gst with v13 market migration
* update bundle, builtin.MethodsMiner.ProveCommitSectors2 -> 3
* actually working v13 migration, v13 migration itest
* Address review
* sealing: Correct DDO snap pledge math
* itests: Mixed ddo itest
* pipeline: Fix sectorWeight
* sealing: convert market deals into PAMs in mixed sectors
* sealing: make market to ddo conversion work
* fix lint
* update gst
* Update actors and GST to lastest integ branch
* commit batcher: Update ProveCommitSectors3Params builder logic
* make gen
* use builtin-actors master
* ddo: address review
* itests: Add commd assertions to ddo tests
* make gen
* gst with fixed types
* config knobs for RequireActivationSuccess
* storage: Drop obsolete flaky tasts
---------
Co-authored-by: Jennifer Wang <jiayingw703@gmail.com>
Co-authored-by: Aayush <arajasek94@gmail.com>
Co-authored-by: Shrenuj Bansal <shrenuj.bansal@protocol.ai>
Co-authored-by: Phi <orjan.roren@gmail.com>
Co-authored-by: Andrew Jackson (Ajax) <snadrus@gmail.com>
Co-authored-by: TippyFlits <james.bluett@protocol.ai>
* shed: Add v13 migration to migrate-state
* shed: some ADL tools, update GST
* shed: diff hamt address mode
* shed migration debug tooling
* shed migration: market diff on error
* shed: Fix cached migration diff
* shed: Diff deal states on bad migration
* shed: Use std json
* shed: Drill in the migration diff more
* shed: Show proposals in migration market diff
* shed: Show added provider sectors diff
* shed: hamts are hard to use
* update gst
* update gst
* update gst
* update GST with fixed invartiant
* go mod tidy
Codec != Raw likely means built-in actor events, which we can safely skip, so
avoid filling up logs with warnings for every built-in actor event that comes
past this point.
Fixes: https://github.com/filecoin-project/lotus/issues/11718
This is done with the intention to add new {Get,Subscribe}ActorEvents in a
future release (i.e. soon!) with both decoded values (dag-json represented)
and simplified (no flags or codec). But because this comes with some
trade-offs wrt fidelity of information (e.g. likely needing to drop events with
badly encoded values, and not retaining original codec), we need to also have
a Raw form of these APIs for consumers that want to take on the burden of
consuming them as they are.
- Pulls in the latest version of `kubo-api-client` (extracted from kubo
0.27.0).
- Update go-libp2p to v0.33.0
- Update boxo to v0.18.0
- Update go-graphsync to v0.16.0
Codec != Raw likely means built-in actor events, which we can safely skip, so
avoid filling up logs with warnings for every built-in actor event that comes
past this point.
Fixes: https://github.com/filecoin-project/lotus/issues/11718
This is done with the intention to add new {Get,Subscribe}ActorEvents in a
future release (i.e. soon!) with both decoded values (dag-json represented)
and simplified (no flags or codec). But because this comes with some
trade-offs wrt fidelity of information (e.g. likely needing to drop events with
badly encoded values, and not retaining original codec), we need to also have
a Raw form of these APIs for consumers that want to take on the burden of
consuming them as they are.
Now that 1.22 is out. Libp2p will also be dropping support for 1.20
soon (if it hasn't already?) so it can _finally_ stop supporting
specific compiler versions (we can stop caring so much about the
"maximum" supported go version).
This enhancement optimizes the schema migration process for the event
index by preventing the redundant execution of Data Definition Language
(DDL) statements that define the event schema. Traditionally, these DDL
statements were grouped into a single slice, reflecting the most current
version of the event index schema. With each migration, this slice was
updated to the latest schema iteration, executing all statements in
bulk. Initially, this method sufficed as migrations were focused on
adding indices to existing table columns.
However, as the database schema evolves to meet new requirements, such
as the forthcoming migrations that involve changes to table schemas
(notably, indexing events by emitter actor ID instead of addresses),
the prior approach of bulk execution of DDL statements becomes
unsuitable: it will no longer be safe to repeatedly execute DDL
statements in previous migrations, because the upcoming one changes
`event` table column structure. To address this issue, the work here has
isolated the event index schema migrations on a per-version basis. This
adjustment ensures that only the necessary DDL statements are executed
during each migration, avoiding the inefficiencies and potential errors
associated with redundant executions.
The work here should also minimize the refactoring required for future
migrations, facilitating a smoother introduction of significant schema
updates.
* [WIP] feat: Add nv22 skeleton
Addition of Network Version 22 skeleton
* update FFI
* feat: drand: refactor round verification
* feat: sealing: Support nv22 DDO features in the sealing pipeline (#11226)
* Initial work supporting DDO pieces in lotus-miner
* sealing: Update pipeline input to operate on UniversalPiece
* sealing: Update pipeline checks/sealing states to operate on UniversalPiece
* sealing: Make pipeline build with UniversalPiece
* move PieceDealInfo out of api
* make gen
* make sealing pipeline unit tests pass
* fix itest ensemble build
* don't panic in SectorsStatus with deals
* stop linter from complaining about checkPieces
* fix sector import tests
* mod tidy
* sealing: Add logic for (pre)committing DDO sectors
* sealing: state-types with method defs
* DDO non-snap pipeline works(?), DDO Itests
* DDO support in snapdeals pipeline
* make gen
* update actor bundles
* update the gst market fix
* fix: chain: use PreCommitSectorsBatch2 when setting up genesis
* some bug fixes
* integration working changes
* update actor bundles
* Make TestOnboardRawPieceSnap pass
* Appease the linter
* Make deadlines test pass with v12 actors
* Update go-state-types, abstract market DealState
* make gen
* mod tidy, lint fixes
* Fix some more tests
* Bump version in master
Bump version in master
* Make gen
Make gen
* fix sender
* fix: lotus-provider: Fix winning PoSt
* fix: sql Scan cannot write to an object
* Actually show miner-addrs in info-log
Actually show miner-addrs in lotus-provider info-log
* [WIP] feat: Add nv22 skeleton
Addition of Network Version 22 skeleton
* update FFI
* ddo is now nv22
* make gen
* temp actor bundle with ddo
* use working go-state-types
* gst with v13 market migration
* update bundle, builtin.MethodsMiner.ProveCommitSectors2 -> 3
* actually working v13 migration, v13 migration itest
* Address review
* sealing: Correct DDO snap pledge math
* itests: Mixed ddo itest
* pipeline: Fix sectorWeight
* sealing: convert market deals into PAMs in mixed sectors
* sealing: make market to ddo conversion work
* fix lint
* update gst
* Update actors and GST to lastest integ branch
* commit batcher: Update ProveCommitSectors3Params builder logic
* make gen
* use builtin-actors master
* ddo: address review
* itests: Add commd assertions to ddo tests
* make gen
* gst with fixed types
* config knobs for RequireActivationSuccess
* storage: Drop obsolete flaky tasts
---------
Co-authored-by: Jennifer Wang <jiayingw703@gmail.com>
Co-authored-by: Aayush <arajasek94@gmail.com>
Co-authored-by: Shrenuj Bansal <shrenuj.bansal@protocol.ai>
Co-authored-by: Phi <orjan.roren@gmail.com>
Co-authored-by: Andrew Jackson (Ajax) <snadrus@gmail.com>
Co-authored-by: TippyFlits <james.bluett@protocol.ai>
* feat: implement FIP-0063
* chore: deps: update to go-multiaddr v0.12.2 (#11602)
* feat: fvm: update the FVM/FFI to v4.1 (#11608) (#11612)
This:
1. Adds nv22 support.
2. Updates the message tracing format.
Co-authored-by: Steven Allen <steven@stebalien.com>
* AggregateProofType nil when doing batch updates
Use latest nv22 go-state-types version with matching update
* Update to v13.0.0-rc.2 bundle
* chore: Upgrade heights and codename
Update upgrade heights
Co-Authored-By: Steven Allen <steven@stebalien.com>
* Update epoch after nv22 DRAND switch
Update epoch after nv22 DRAND switch
* Update Mango codename to Phoneix
Make the codename for the Drand-change inline with Dragon style.
* Add UpgradePhoenixHeight to API params
* set UpgradePhoenixHeight to be one hour after Dragon
* Make gen
Make gen and UpgradePhoenixHeight in butterfly and local devnet to be in line with Calibration and Mainnet
* Update epoch heights (#11637)
Update epoch heights
* new: add forest bootstrap nodes (#11636)
Signed-off-by: samuelarogbonlo <sbayo971@gmail.com>
* Merge pull request #11491 from filecoin-project/fix/remove-decommissioned-pl-bootstrap-nodes
Remove PL operated bootstrap nodes from mainnet.pi
* feat: api: new verified registry methods to get all allocations and claims (#11631)
* new verireg methods
* update changelog and add itest
* update itest and cli
* update new method's support till v9
* remove gateway APIs
* fix cli internal var names
* chore:: backport #11609 to the feat/nv22 branch (#11644)
* feat: api: improve the correctness of Eth's trace_block (#11609)
* Improve the correctness of Eth's trace_block
- Improve encoding/decoding of parameters and return values:
- Encode "native" parameters and return values with Solidity ABI.
- Correctly decode parameters to "create" calls.
- Use the correct (ish) output for "create" calls.
- Handle all forms of "create".
- Make robust with respect to reverts:
- Use the actor ID/address from the trace instead of looking it up in
the state-tree (may not exist in the state-tree due to a revert).
- Gracefully handle failed actor/contract creation.
- Improve performance:
- We avoid looking anything up in the state-tree when translating the
trace, which should significantly improve performance.
- Improve code readability:
- Remove all "backtracking" logic.
- Use an "environment" struct to store temporary state instead of
attaching it to the trace.
- Fix random bugs:
- Fix an allocation bug in the "address" logic (need to set the
capacity before modifying the slice).
- Improved error checking/handling.
- Use correct types for `trace_block` action/results (create, call, etc.).
- And use the correct types for Result/Action structs instead of reusing the same "Call" action every time.
- Improve error messages.
* Make gen
Make gen
---------
Co-authored-by: Steven Allen <steven@stebalien.com>
* fix: add UpgradePhoenixHeight to StateGetNetworkParams (#11648)
* chore: deps: update to go-state-types v13.0.0-rc.1
* do NOT update the cache when running the real migration
* Merge pull request #11632 from hanabi1224/hm/drand-test
feat: drand quicknet: allow scheduling drand quicknet upgrade before nv22 on 2k devnet
* chore: deps: update to go-state-types v13.0.0-rc.2
chore: deps: update to go-state-types v13.0.0-rc.2
* feat: set migration config UpgradeEpoch for v13 actors upgrade
* Built-in actor events first draft
* itest for DDO non-market verified data w/ builtin actor events
* Tests for builtin actor events API
* Clean up DDO+Events tests, add lots of explainer comments
* Minor tweaks to events types
* Avoid duplicate messages when looking for receipts
* Rename internal events modules for clarity
* Adjust actor event API after review
* s/ActorEvents/Events/g in global config
* Manage event sending rate for SubscribeActorEvents
* Terminate SubscribeActorEvents chan when at max height
* Document future API changes
* More clarity in actor event API docs
* More post-review changes, lots of tests for SubscribeActorEvents
Use BlockDelay as the window for receiving events on the SubscribeActorEvents
channel. We expect the user to have received the initial batch of historical
events (if any) in one block's time. For real-time events we expect them to
not fall behind by roughly one block's time.
* Remove duplicate code from actor event type marshalling tests
Reduce verbosity and remove duplicate test logic from actor event types
JSON marshalling tests.
* Rename actor events test to follow go convention
Add missing `s` to `actor_events` test file to follow golang convention
used across the repo.
* Run actor events table tests in deterministic order
Refactor `map` usage for actor event table tests to ensure deterministic
test execution order, making debugging potential issues easier. If
non-determinism is a target, leverage Go's built-in parallel testing
capabilities.
* Reduce scope for filter removal failure when getting actor events
Use a fresh context to remove the temporary filter installed solely to
get the actor events. This should reduce chances of failure in a case
where the original context may be expired/cancelled.
Refactor removal into a `defer` statement for a more readable, concise
return statement.
* Use fixed RNG seed for actor event tests
Improve determinism in actor event tests by using a fixed RNG seed. This
makes up a more reproducible test suit.
* Use provided libraries to assert eventual conditions
Use the functionalities already provided by `testify` to assert eventual
conditions, and remove the use of `time.Sleep`.
Remove duplicate code in utility functions that are already defined.
Refactor assertion helper functions to use consistent terminology:
"require" implies fatal error, whereas "assert" implies error where the
test may proceed executing.
* Update changelog for actor events APIs
* Fix concerns and docs identified by review
* Update actor bundle to v13.0.0-rc3
Update actor bundle to v13.0.0-rc3
* Prep Lotus v1.26.0-rc1
- For sanity reverting the mainnet upgrade epoch to 99999999, and then only set it when cutting the final release
-Update Calibnet CIDs to v13.0.0-rc3
- Add GetActorEvents, SubscribeActorEvents, GetAllClaims and GetAllAllocations methods to the changelog
Co-Authored-By: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
* Update CHANGELOG.md
Co-authored-by: Masih H. Derkani <m@derkani.org>
* Make gen
Make gen
* fix: beacon: validate drand change at nv16 correctly
* bump to v1.26.0-rc2
* test: cleanup ddo verified itest, extract steps to functions
also add allocation-removed event case
* test: extract verified DDO test to separate file, add more checks
* test: add additional actor events checks
* Add verification for "deal-activated" actor event
* docs(drand): document the meaning of "IsChained" (#11692)
* Resolve conflicts
I encountered multiple issues when trying to run make gen. And these changes fixed a couple of them:
- go mod tidy
- Remove RaftState/RaftLeader
- Revert `if ts.Height() > claim.TermMax+claim.TermStart || !cctx.IsSet("expired")` to the what is in the release/v1.26.0: `if tsHeight > val.TermMax || !expired`
* fixup imports, make jen
* Update version
Update version in master to v1.27.0-dev
* Update node/impl/full/dummy.go
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
* Adjust ListClaimsCmd
Adjust ListClaimsCmd according to review
---------
Signed-off-by: samuelarogbonlo <sbayo971@gmail.com>
Co-authored-by: TippyFlits <james.bluett@protocol.ai>
Co-authored-by: Aayush <arajasek94@gmail.com>
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
Co-authored-by: Jennifer Wang <jiayingw703@gmail.com>
Co-authored-by: Shrenuj Bansal <shrenuj.bansal@protocol.ai>
Co-authored-by: Andrew Jackson (Ajax) <snadrus@gmail.com>
Co-authored-by: Steven Allen <steven@stebalien.com>
Co-authored-by: Rod Vagg <rod@vagg.org>
Co-authored-by: Samuel Arogbonlo <47984109+samuelarogbonlo@users.noreply.github.com>
Co-authored-by: LexLuthr <88259624+LexLuthr@users.noreply.github.com>
Co-authored-by: tom123222 <160735201+tom123222@users.noreply.github.com>
Co-authored-by: Aarsh Shah <aarshkshah1992@gmail.com>
Co-authored-by: Masih H. Derkani <m@derkani.org>
Co-authored-by: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
Closes: https://github.com/filecoin-project/lotus/issues/11679
* Introduce a `moved:"To.New.Config"` tag which prints a stderr warning when
you use one of these, but will move any set value to the new location if the
new location isn't already set itself.
* Look for `X is DEPRECATED` to hold certain fields back from documentation.
* Use `toml:"omitempty"` to prevent the default config output from having these
deprecated values.
Add tests that assert the embedded built-in actors metadata is correct:
* the corresponding CAR file is present in built-in actors released
assets as a CAR file.
* manifest CID is the only root CID in the corresponding CAR file.
* actor CIDs are present in the corresponding CAR file.
Fixes#11683
- For sanity reverting the mainnet upgrade epoch to 99999999, and then only set it when cutting the final release
-Update Calibnet CIDs to v13.0.0-rc3
- Add GetActorEvents, SubscribeActorEvents, GetAllClaims and GetAllAllocations methods to the changelog
Co-Authored-By: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
Use the functionalities already provided by `testify` to assert eventual
conditions, and remove the use of `time.Sleep`.
Remove duplicate code in utility functions that are already defined.
Refactor assertion helper functions to use consistent terminology:
"require" implies fatal error, whereas "assert" implies error where the
test may proceed executing.
Use a fresh context to remove the temporary filter installed solely to
get the actor events. This should reduce chances of failure in a case
where the original context may be expired/cancelled.
Refactor removal into a `defer` statement for a more readable, concise
return statement.
Refactor `map` usage for actor event table tests to ensure deterministic
test execution order, making debugging potential issues easier. If
non-determinism is a target, leverage Go's built-in parallel testing
capabilities.
Use BlockDelay as the window for receiving events on the SubscribeActorEvents
channel. We expect the user to have received the initial batch of historical
events (if any) in one block's time. For real-time events we expect them to
not fall behind by roughly one block's time.
These are the folks who are actively contributing to lotus maintenance, issue triaging, PR reviews and development.
Made this change to decouple lotus ownership with other filecoin core repo's ownership and maintainership that comes with lotus-maintainer perm
* feat: api: improve the correctness of Eth's trace_block (#11609)
* Improve the correctness of Eth's trace_block
- Improve encoding/decoding of parameters and return values:
- Encode "native" parameters and return values with Solidity ABI.
- Correctly decode parameters to "create" calls.
- Use the correct (ish) output for "create" calls.
- Handle all forms of "create".
- Make robust with respect to reverts:
- Use the actor ID/address from the trace instead of looking it up in
the state-tree (may not exist in the state-tree due to a revert).
- Gracefully handle failed actor/contract creation.
- Improve performance:
- We avoid looking anything up in the state-tree when translating the
trace, which should significantly improve performance.
- Improve code readability:
- Remove all "backtracking" logic.
- Use an "environment" struct to store temporary state instead of
attaching it to the trace.
- Fix random bugs:
- Fix an allocation bug in the "address" logic (need to set the
capacity before modifying the slice).
- Improved error checking/handling.
- Use correct types for `trace_block` action/results (create, call, etc.).
- And use the correct types for Result/Action structs instead of reusing the same "Call" action every time.
- Improve error messages.
* Make gen
Make gen
---------
Co-authored-by: Steven Allen <steven@stebalien.com>
Now that 1.22 is out. Libp2p will also be dropping support for 1.20
soon (if it hasn't already?) so it can _finally_ stop supporting
specific compiler versions (we can stop caring so much about the
"maximum" supported go version).
* new verireg methods
* update changelog and add itest
* update itest and cli
* update new method's support till v9
* remove gateway APIs
* fix cli internal var names
* Improve the correctness of Eth's trace_block
- Improve encoding/decoding of parameters and return values:
- Encode "native" parameters and return values with Solidity ABI.
- Correctly decode parameters to "create" calls.
- Use the correct (ish) output for "create" calls.
- Handle all forms of "create".
- Make robust with respect to reverts:
- Use the actor ID/address from the trace instead of looking it up in
the state-tree (may not exist in the state-tree due to a revert).
- Gracefully handle failed actor/contract creation.
- Improve performance:
- We avoid looking anything up in the state-tree when translating the
trace, which should significantly improve performance.
- Improve code readability:
- Remove all "backtracking" logic.
- Use an "environment" struct to store temporary state instead of
attaching it to the trace.
- Fix random bugs:
- Fix an allocation bug in the "address" logic (need to set the
capacity before modifying the slice).
- Improved error checking/handling.
- Use correct types for `trace_block` action/results (create, call, etc.).
- And use the correct types for Result/Action structs instead of reusing the same "Call" action every time.
- Improve error messages.
We did this to avoid using cached migrations in the borked watermelon
upgrade on calibrationnet, but we don't need to keep this in the
code (even for users syncing from scratch).
the .gz files are impossible to rebase/merge/etc. but the files are needed in
the repo for `go build` because they are embeds; so we just don't gzip them
This will re-execute tipsets to forcibly re-compute and store events
when they're missing. This is effectively lazy backfilling of events.
NOTE: This _won't_ backfill the index itself, it'll just give us the
events.
fixes#11335
* chore: cleanup sync serve and reduce log noise
1. Demote a noisy blocksync request error to debug. All this warning
means is that someone is requesting a tipset we don't have.
2. Add a separate warning if we fail to collect a chain. If we have the
tipsets but fail to collect the chain, something is actually wrong.
3. Fix a TODO and return a single CompactedMessages rather than 4
separate values.
* generally reduce the warning to info
It turns out we do fail to gather messages frequently as well, likely
because we have written the tipsets but haven't fetched the messages...
We can now atomically switch chains when checkpointing. Previously,
we'd call `SetHead` followed by `SetCheckpoint`. Unfortunately, that's
not atomic and the "head" could have reverted before we called
`SetCheckpoint` (causing the latter to fail).
Now, we just call `SetCheckpoint` and let `SetCheckpoint` adjust our
head. This changes the behavior of `ChainStore.SetCheckpoint`, but
`Syncer.SyncCheckpoint` is the only caller anyways.
* Initial work supporting DDO pieces in lotus-miner
* sealing: Update pipeline input to operate on UniversalPiece
* sealing: Update pipeline checks/sealing states to operate on UniversalPiece
* sealing: Make pipeline build with UniversalPiece
* move PieceDealInfo out of api
* make gen
* make sealing pipeline unit tests pass
* fix itest ensemble build
* don't panic in SectorsStatus with deals
* stop linter from complaining about checkPieces
* fix sector import tests
* mod tidy
* sealing: Add logic for (pre)committing DDO sectors
* sealing: state-types with method defs
* DDO non-snap pipeline works(?), DDO Itests
* DDO support in snapdeals pipeline
* make gen
* update actor bundles
* update the gst market fix
* fix: chain: use PreCommitSectorsBatch2 when setting up genesis
* some bug fixes
* integration working changes
* update actor bundles
* Make TestOnboardRawPieceSnap pass
* Appease the linter
* Make deadlines test pass with v12 actors
* Update go-state-types, abstract market DealState
* make gen
* mod tidy, lint fixes
* Fix some more tests
* Bump version in master
Bump version in master
* Make gen
Make gen
* fix sender
* fix: lotus-provider: Fix winning PoSt
* fix: sql Scan cannot write to an object
* Actually show miner-addrs in info-log
Actually show miner-addrs in lotus-provider info-log
* [WIP] feat: Add nv22 skeleton
Addition of Network Version 22 skeleton
* update FFI
* ddo is now nv22
* make gen
* temp actor bundle with ddo
* use working go-state-types
* gst with v13 market migration
* update bundle, builtin.MethodsMiner.ProveCommitSectors2 -> 3
* actually working v13 migration, v13 migration itest
* Address review
* sealing: Correct DDO snap pledge math
* itests: Mixed ddo itest
* pipeline: Fix sectorWeight
* sealing: convert market deals into PAMs in mixed sectors
* sealing: make market to ddo conversion work
* fix lint
* update gst
* Update actors and GST to lastest integ branch
* commit batcher: Update ProveCommitSectors3Params builder logic
* make gen
* use builtin-actors master
* ddo: address review
* itests: Add commd assertions to ddo tests
* make gen
* gst with fixed types
* config knobs for RequireActivationSuccess
* storage: Drop obsolete flaky tasts
---------
Co-authored-by: Jennifer Wang <jiayingw703@gmail.com>
Co-authored-by: Aayush <arajasek94@gmail.com>
Co-authored-by: Shrenuj Bansal <shrenuj.bansal@protocol.ai>
Co-authored-by: Phi <orjan.roren@gmail.com>
Co-authored-by: Andrew Jackson (Ajax) <snadrus@gmail.com>
Co-authored-by: TippyFlits <james.bluett@protocol.ai>
1. Let the user specify `--remove-existing-chain=false` to avoid the
prompt and fail if there's an existing chain.
2. Only prompt when interactive. Otherwise, _don't_ remove the chain
by-default.
The correct name for this field is 'input' according to the Ethereum specs [0].
However, for the longest time, clients have been using 'data' and servers have been
lenient to accept both, preferring 'input' over 'data' when both appear.
Our lack of support for 'input' had gone unnoticed until go-ethereum decided
to adjust their ethclient implementation to issue eth_call and eth_estimateGas
requests with the 'input' field instead of 'data' [1]. This suddenly broke apps
using this client against Lotus' Eth API.
[0]: https://github.com/ethereum/execution-apis/blob/main/src/schemas/transaction.yaml#L33-L35
[1]: ethereum/go-ethereum#28078
Co-authored-by: raulk <raul.kripalani@gmail.com>
Previously, we weren't checking the "to" address. I've also re-ordered
the operations in this function to make it easier to reason about them.
It'll have a slight runtime cost (we _always_ ABI-encode the parameters,
then throw away the result if it turns out we're actually dealing with
an Ethereum transaction), but it's _much_ simpler.
Also explicitly limit how many bytes we're willing to read in one go
such that we're capable of reading a worst-case tipset (like, really,
never going to happen worst-case). Previously, this wasn't an issue.
However, we've bumped the max number of messages from 8,192 to 150,000
and need to limit allocations somewhere else.
Also explicitly limit how many bytes we're willing to read in one go
such that we're capable of reading a worst-case tipset (like, really,
never going to happen worst-case). Previously, this wasn't an issue.
However, we've bumped the max number of messages from 8,192 to 150,000
and need to limit allocations somewhere else.
Also explicitly limit how many bytes we're willing to read in one go
such that we're capable of reading a worst-case tipset (like, really,
never going to happen worst-case). Previously, this wasn't an issue.
However, we've bumped the max number of messages from 8,192 to 150,000
and need to limit allocations somewhere else.
Correctly handle "unresolvable" to/from addresses in top-level messages in the Ethereum API. Specifically:
1. Fail if we can't resolve the from address. As far as I can tell, this should be impossible (the message statically couldn't have been included in the block if the sender didn't exist).
2. If we can't resolve the "to" address to an ID, use "max uint64" as the ID (`0xff0000000000000000000000ffffffffffffffff`). This will only happen if the transaction was reverted. It'll be a little confusing, but the alternative is to (a) use an empty address (will look like a contract creation, which is definitely wrong) or (b) use a random/hashed address which will likely be more confusing as it won't be "obviously weird".
In #11212, we added the necessary logic to download the params
automatically. However, we're not taking advantage of CI caching.
Here, we configure CI to cache these params.
When translating "native" messages to Ethereum transactions, correctly handle parameters:
1. If the message looks like a valid "create external", treat it as a contract creation.
2. If it looks like a valid EVM invocation, decode it as such.
3. Otherwise, ABI-encode the parameters to make them look like a "handle_filecoin_method" call. This
will help chain explorers recognize these messages.
Part of #11355
We need to always use the state-tree from the tipset _after_ the message
executed. If we use any other state-tree, we might not find the address
we're trying to resolve.
This change also has some implication for pending messages: there's no
guarantee we'll be able to generate a 0x-style address for a pending
native message. So, instead of trying, I've removed support for pending
native messages from the Eth API. Messages from EthAccounts will still
work, and native messages will still show up in blocks/traces, they just
won't show up as "pending". Which should affect exactly nobody.
I'm also taking this opportunity to cleanup some edge-cases:
1. Pass contexts where appropriate.
2. Remove all state access from `ethTxHashFromSignedMessage`.
Part of #11355
We added this check as a self-test to make sure that the message indices
in our trace matched up with those in the block. Unfortunately, this
only works for blocks on the main-chain, and breaks tracing of uncle
blocks (and tracing of head).
* upgrade calibnet by removing move_partitions from miner actor in actor v12
* cids for buggy bundles
* revert changes to v12 tar
* upgrade system actor state
* update based on manifest
* nit: clean up some comments
* chore: rename param to oldBuggyMinerCID
* refactor, ensure both buggy bundles are loaded
* update to actors v12.0.0-rc.3
* fix: load second buggy bundle for UpgradeWatermelonFixHeight
* add calibration fix2 upgrade epcoh
* update mainnet upgrade epoch
---------
Co-authored-by: Aayush <arajasek94@gmail.com>
Co-authored-by: jennijuju <jiayingw703@gmail.com>
* upgrade calibnet by removing move_partitions from miner actor in actor v12
* cids for buggy bundles
* revert changes to v12 tar
* upgrade system actor state
* update based on manifest
* nit: clean up some comments
* chore: rename param to oldBuggyMinerCID
* refactor, ensure both buggy bundles are loaded
* update to actors v12.0.0-rc.3
* fix: load second buggy bundle for UpgradeWatermelonFixHeight
* add calibration fix2 upgrade epcoh
* update mainnet upgrade epoch
---------
Co-authored-by: Aayush <arajasek94@gmail.com>
Co-authored-by: jennijuju <jiayingw703@gmail.com>
* chore: eth: move & rename input/output encoding functions
These are shared functions, so I'm moving them to the utils library.
* fix: eth: correctly encode and simplify native input/output encoding
When generating eth traces, we encode "native" message inputs/outputs
to "solidity ABI" by formatting the inputs/outputs the same way we do in
FEVM's "handle_native_method". However, we had quite a few bugs with the
implementation:
1. We were right-aligning 64bit values in 256bit words, instead of
left-aligning (as we should given that these values are big-endian).
2. The return-value encoding wasn't correctly handling lengths.
This patch:
1. Fixes those bugs.
2. Deduplicates the logic (we're doing _basically_ the same thing in
both cases).
3. Removes all error paths (these functions can't fail).
- Added a goroutine to listen for interrupt signals, which will cancel the current context when an interrupt signal is received. This allows for graceful shutdown of ongoing operations.
We were computing this based on the max block gas, but this is
incorrect. The new value isn't entirely correct either (we should
probably compute an average of the gas used in each block in the
tipset?), but it's good enough.
fixes#10515
* refactor: make GetEmbeddedBuiltinActorsBundle take network bundle name
* update calibnet actor bundle to v12.0.0-rc.2, but include v12.0.0-rc.1 as calibrationnet-buggy.car
* wip: calibnet unbork migration
* calibnet: add buggy miner actor CID to actorMeta
* fix incorrect buggy calibnet manifest
* make UpgradeWatermelonFixHeight a build param
* calibnet patch: check whether network is calibration from init actor state
* add sanity checks to the v12 calibnet patch upgrade
* address review
* refactor: make GetEmbeddedBuiltinActorsBundle take network bundle name
* update calibnet actor bundle to v12.0.0-rc.2, but include v12.0.0-rc.1 as calibrationnet-buggy.car
* wip: calibnet unbork migration
* calibnet: add buggy miner actor CID to actorMeta
* fix incorrect buggy calibnet manifest
* make UpgradeWatermelonFixHeight a build param
* calibnet patch: check whether network is calibration from init actor state
* add sanity checks to the v12 calibnet patch upgrade
* address review
1. Implement a pass-through for garbage collection on the idstore.
2. Fix the `lotus-shed state-prune` command.
NOTE: the new performance of running a full prune will be significantly
less as this version doesn't batch. However, it should now actually
_work_ and most users will be using the splitstore anyways.
* refactor: replace ClearLayerData with ClearCache
The `ClearLayerData` FFI call was accidentally introduced with the
Synthetic PoRep. The call does under the hood exactly what `ClearCache`
is doing. This is a first step to remove `ClearLayerData`t also from
the FFI again, in order to reduce the API surface.
* fix types
---------
Co-authored-by: Steven Allen <steven@stebalien.com>
We were computing this based on the max block gas, but this is
incorrect. The new value isn't entirely correct either (we should
probably compute an average of the gas used in each block in the
tipset?), but it's good enough.
fixes#10515
All these cases here are actually errors and returning `nil` makes this
hard to debug. We likely returned nil in the past to be "best effort"
but, as far as I can tell, we should only hit these error cases if
something is actually wrong.
part of #11325
docker image tag filecoin/<<parameters.image>>:<<parameters.channel>>-<<parameters.network>> filecoin/<<parameters.image>>:"${CIRCLE_SHA:0:7}"-<<parameters.network>>
docker image tag filecoin/<<parameters.image>>:<<parameters.channel>>-<<parameters.network>> filecoin/<<parameters.image>>:"${CIRCLE_TAG}"-<<parameters.network>>
- [ ] If the PR affects users (e.g., new feature, bug fix, system requirements change), update the CHANGELOG.md and add details to the UNRELEASED section.
- [ ] New features have usage guidelines and / or documentation updates in
stale-issue-message:'Oops, seems like we needed more information for this issue, please comment with more details or this issue will be closed in 24 hours.'
close-issue-message:'This issue was closed because it is missing author input.'
stale-pr-message:'Thank you for submitting the PR and contributing to lotus! Lotus maintainers need more of your input before merging it, please address the suggested changes or reply to the comments or this PR will be closed in 48 hours. You are always more than welcome to reopen the PR later as well!'
- "by other packages, and that stutters; consider calling this"
- "Potential file inclusion via variable"
- "should have( a package)? comment"
- "Error return value of `logging.SetLogLevel` is not checked"
- "comment on exported"
- "(func|method) \\w+ should be \\w+"
- "(type|var|struct field|(method|func) parameter) `\\w+` should be `\\w+`"
- "(G306|G301|G307|G108|G302|G204|G104)"
- "don't use ALL_CAPS in Go names"
- "string .* has .* occurrences, make it a constant"
- "a blank import should be only in a main or test package, or have a comment justifying it"
- "package comment should be of the form"
- "Potential hardcoded credentials"
- "Use of weak random number generator"
- "xerrors.* is deprecated"
# gosec
- "^G101: Potential hardcoded credentials"
- "^G108: Profiling endpoint is automatically exposed on /debug/pprof"
- "^G204: Subprocess launched with (variable|a potential tainted input or cmd arguments)"
- "^G301: Expect directory permissions to be 0750 or less"
- "^G302: Expect file permissions to be 0600 or less"
- "^G304: Potential file inclusion via variable"
- "^G306: Expect WriteFile permissions to be 0600 or less"
- "^G404: Use of weak random number generator"
# staticcheck
- "^SA1019: xerrors.* is deprecated: As of Go 1.13, use errors"
# revive
- "^blank-imports: a blank import should be only in a main or test package, or have a comment justifying it"
- "^dot-imports: should not use dot imports"
- "^exported: (func|type) name will be used as [^\\s]+ by other packages, and that stutters; consider calling this \\w+"
- "^exported: comment on exported (const|function|method|type|var) [^\\s]+ should be of the form \"\\w+ ...\""
- "^exported: exported (const|function|method|type|var) [^\\s]+ should have comment (\\(or a comment on this block\\) )?or be unexported"
- "^indent-error-flow: if block ends with a return statement, so drop this else and outdent its block \\(move short variable declaration to its own line if necessary\\)"
- "^package-comments: package comment should be of the form \"Package \\w+ ...\""
- "^package-comments: should have a package comment"
- "^unexported-return: exported func \\w+ returns unexported type [^\\s]+, which can be annoying to use"
- "^unused-parameter: parameter '\\w+' seems to be unused, consider removing or renaming it as _"
- "^var-naming: (const|func|type|var|struct field|(method|func|interface method) parameter) [A-Z]\\w+ should be"
- "^var-naming: (method|range var) \\w*(Api|Http|Id|Rpc|Url)[^\\s]* should be \\w*(API|HTTP|ID|RPC|URL)"
- "^var-naming: don't use underscores in Go names"
- "^var-naming: don't use ALL_CAPS in Go names; use CamelCase"
exclude-use-default:false
exclude-rules:
- path:node/modules/lp2p
linters:
- golint
- path:build/params_.*\.go
linters:
- golint
- path:api/apistruct/struct.go
linters:
- golint
- path:.*_test.go
linters:
- gosec
@@ -66,12 +63,3 @@ issues:
- path:cmd/lotus-bench/.*
linters:
- gosec
- path:api/test/.*
text:"context.Context should be the first parameter"
@@ -73,7 +73,7 @@ All releases under an odd minor version number indicate **feature releases**. Th
Feature releases include new development and bug fixes. They are not mandatory, but still highly recommended, **as they may contain critical security fixes**. Note that some of these releases may be very small patch releases that include critical hotfixes. There is no way to distinguish between a bug fix release and a feature release on the "feature" version. Both cases will use the "patch" version number.
We aim to ship a new feature release of the Lotus software from our development (master) branch every 3 weeks, so users can expect a regular cadence of Lotus feature releases. Note that mandatory releases for network upgrades may disrupt this schedule. For more, see the Release Cycle section (TODO: Link).
We aim to ship a new feature release of the Lotus software from our development (master) branch every 3 weeks, so users can expect a regular cadence of Lotus feature releases. Note that mandatory releases for network upgrades may disrupt this schedule. For more, see the [Release Cycle section](#release-cycle).
@echo "lotus-daemon service installed. Don't forget to run 'sudo systemctl start lotus-daemon' to start it and 'sudo systemctl enable lotus-daemon' for it to be enabled on startup."
@echo "lotus-daemon service installed."
@echo "To start the service, run: 'sudo systemctl start lotus-daemon'"
@echo "To enable the service on startup, run: 'sudo systemctl enable lotus-daemon'"
@echo "lotus-miner service installed. Don't forget to run 'sudo systemctl start lotus-miner' to start it and 'sudo systemctl enable lotus-miner' for it to be enabled on startup."
@echo "lotus-miner service installed."
@echo "To start the service, run: 'sudo systemctl start lotus-miner'"
@echo "To enable the service on startup, run: 'sudo systemctl enable lotus-miner'"
@@ -19,7 +20,7 @@ Lotus is an implementation of the Filecoin Distributed Storage Network. For more
## Building & Documentation
> Note: The default `master` branch is the dev branch, please use with caution. For the latest stable version, checkout the most recent [`Latest release`](https://github.com/filecoin-project/lotus/releases).
For complete instructions on how to build, install and setup lotus, please visit [https://lotus.filecoin.io](https://lotus.filecoin.io/lotus/install/prerequisites/#supported-platforms). Basic build instructions can be found further down in this readme.
## Reporting a Vulnerability
@@ -71,10 +72,10 @@ For other distributions you can find the required dependencies [here.](https://l
#### Go
To build Lotus, you need a working installation of [Go 1.19.12 or higher](https://golang.org/dl/):
To build Lotus, you need a working installation of [Go 1.21.7 or higher](https://golang.org/dl/):
Note: The default branch `master` is the dev branch where the latest new features, bug fixes and improvement are in. However, if you want to run lotus on Filecoin mainnet and want to run a production-ready lotus, get the latest release[ here](https://github.com/filecoin-project/lotus/releases).
2. To join mainnet, checkout the [latest release](https://github.com/filecoin-project/lotus/releases).
@@ -133,6 +134,8 @@ Note: The default branch `master` is the dev branch where the latest new feature
6. You should now have Lotus installed. You can now [start the Lotus daemon and sync the chain](https://lotus.filecoin.io/lotus/install/linux/#start-the-lotus-daemon-and-sync-the-chain).
7. (Optional) Follow the [Setting Up Prometheus and Grafana](https://github.com/filecoin-project/lotus/tree/master/metrics/README.md) guide for detailed instructions on setting up a working monitoring system running against a local running lotus node.
## License
Dual-licensed under [MIT](https://github.com/filecoin-project/lotus/blob/master/LICENSE-MIT) + [Apache 2.0](https://github.com/filecoin-project/lotus/blob/master/LICENSE-APACHE)
returnnil,xerrors.Errorf("unknown actor version %d",av)
}
@@ -174,5 +186,7 @@ func AllCodes() []cid.Cid {
(&state10{}).Code(),
(&state11{}).Code(),
(&state12{}).Code(),
(&state13{}).Code(),
(&state14{}).Code(),
}
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.