## Issue Addressed
Fix a bug in the storage of the linear block roots array in the freezer DB. Previously this array was always written as part of state storage (or block backfill). With state pruning enabled by #4610, these states were no longer being written and as a result neither were the block roots.
The impact is quite low, we would just log an error when trying to forwards-iterate the block roots, which for validating nodes only happens when they try to look up blocks for peers:
> Aug 25 03:42:36.980 ERRO Missing chunk in forwards iterator chunk index: 49726, service: freezer_db
Any node checkpoint synced off `unstable` is affected and has a corrupt database. If you see the log above, you need to re-sync with the fix. Nodes that haven't checkpoint synced recently should _not_ be corrupted, even if they ran the buggy version.
## Proposed Changes
- Use a `ChunkWriter` to write the block roots when states are not being stored.
- Tweak the usage of `get_latest_restore_point` so that it doesn't return a nonsense value when state pruning is enabled.
- Tweak the guarantee on the block roots array so that block roots are assumed available up to the split slot (exclusive). This is a bit nicer than relying on anything to do with the latest restore point, which is a nonsensical concept when there aren't any restore points.
## Additional Info
I'm looking forward to deleting the chunked vector code for good when we merge tree-states 😁
## Issue Addressed
Closes#3210Closes#3211
## Proposed Changes
- Checkpoint sync from the latest finalized state regardless of its alignment.
- Add the `block_root` to the database's split point. This is _only_ added to the in-memory split in order to avoid a schema migration. See `load_split`.
- Add a new method to the DB called `get_advanced_state`, which looks up a state _by block root_, with a `state_root` as fallback. Using this method prevents accidental accesses of the split's unadvanced state, which does not exist in the hot DB and is not guaranteed to exist in the freezer DB at all. Previously Lighthouse would look up this state _from the freezer DB_, even if it was required for block/attestation processing, which was suboptimal.
- Replace several state look-ups in block and attestation processing with `get_advanced_state` so that they can't hit the split block's unadvanced state.
- Do not store any states in the freezer database by default. All states will be deleted upon being evicted from the hot database unless `--reconstruct-historic-states` is set. The anchor info which was previously used for checkpoint sync is used to implement this, including when syncing from genesis.
## Additional Info
Needs further testing. I want to stress-test the pruned database under Hydra.
The `get_advanced_state` method is intended to become more relevant over time: `tree-states` includes an identically named method that returns advanced states from its in-memory cache.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#4245
## Proposed Changes
- If an SSE channel fills up, send a comment instead of terminating the stream.
- Add a CLI flag for scaling up the SSE buffer: `--http-sse-capacity-multiplier N`.
## Additional Info
~~Blocked on #4462. I haven't rebased on that PR yet for initial testing, because it still needs some more work to handle long-running HTTP threads.~~
- [x] Add CLI flag tests.
## Issue Addressed
NA
## Proposed Changes
Rather than spawning new tasks on the tokio executor to process each HTTP API request, send the tasks to the `BeaconProcessor`. This achieves:
1. Places a bound on how many concurrent requests are being served (i.e., how many we are actually trying to compute at one time).
1. Places a bound on how many requests can be awaiting a response at one time (i.e., starts dropping requests when we have too many queued).
1. Allows the BN prioritise HTTP requests with respect to messages coming from the P2P network (i.e., proiritise importing gossip blocks rather than serving API requests).
Presently there are two levels of priorities:
- `Priority::P0`
- The beacon processor will prioritise these above everything other than importing new blocks.
- Roughly all validator-sensitive endpoints.
- `Priority::P1`
- The beacon processor will prioritise practically all other P2P messages over these, except for historical backfill things.
- Everything that's not `Priority::P0`
The `--http-enable-beacon-processor false` flag can be supplied to revert back to the old behaviour of spawning new `tokio` tasks for each request:
```
--http-enable-beacon-processor <BOOLEAN>
The beacon processor is a scheduler which provides quality-of-service and DoS protection. When set to
"true", HTTP API requests will queued and scheduled alongside other tasks. When set to "false", HTTP API
responses will be executed immediately. [default: true]
```
## New CLI Flags
I added some other new CLI flags:
```
--beacon-processor-aggregate-batch-size <INTEGER>
Specifies the number of gossip aggregate attestations in a signature verification batch. Higher values may
reduce CPU usage in a healthy network while lower values may increase CPU usage in an unhealthy or hostile
network. [default: 64]
--beacon-processor-attestation-batch-size <INTEGER>
Specifies the number of gossip attestations in a signature verification batch. Higher values may reduce CPU
usage in a healthy network whilst lower values may increase CPU usage in an unhealthy or hostile network.
[default: 64]
--beacon-processor-max-workers <INTEGER>
Specifies the maximum concurrent tasks for the task scheduler. Increasing this value may increase resource
consumption. Reducing the value may result in decreased resource usage and diminished performance. The
default value is the number of logical CPU cores on the host.
--beacon-processor-reprocess-queue-len <INTEGER>
Specifies the length of the queue for messages requiring delayed processing. Higher values may prevent
messages from being dropped while lower values may help protect the node from becoming overwhelmed.
[default: 12288]
```
I needed to add the max-workers flag since the "simulator" flavor tests started failing with HTTP timeouts on the test assertions. I believe they were failing because the Github runners only have 2 cores and there just weren't enough workers available to process our requests in time. I added the other flags since they seem fun to fiddle with.
## Additional Info
I bumped the timeouts on the "simulator" flavor test from 4s to 8s. The prioritisation of consensus messages seems to be causing slower responses, I guess this is what we signed up for 🤷
The `validator/register` validator has some special handling because the relays have a bad habit of timing out on these calls. It seems like a waste of a `BeaconProcessor` worker to just wait for the builder API HTTP response, so we spawn a new `tokio` task to wait for a builder response.
I've added an optimisation for the `GET beacon/states/{state_id}/validators/{validator_id}` endpoint in [efbabe3](efbabe3252). That's the endpoint the VC uses to resolve pubkeys to validator indices, and it's the endpoint that was causing us grief. Perhaps I should move that into a new PR, not sure.
## Issue Addressed
Addresses [#4401](https://github.com/sigp/lighthouse/issues/4401)
## Proposed Changes
Shift some constants into ```ChainSpec``` and remove the constant values from code space.
## Additional Info
I mostly used ```MainnetEthSpec::default_spec()``` for getting ```ChainSpec```. I wonder Did I make a mistake about that.
Co-authored-by: armaganyildirak <armaganyildirak@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Solves #4442
## Proposed Changes
EL clients log errors if we don't query this endpoint, but they are making releases that remove this error logging. After those are out we can stop calling it, after which point EL teams will remove the endpoint entirely.
Refer https://hackmd.io/@n0ble/deprecate-exchgTC
## Issue Addressed
The PR fixes a bug where the the ideal rewards for source and head were incorrectly set.
Output from testing a validator that performed optimally in a Phase 0 epoch , note the `source` and `target` under ideal rewards is incorrect (compared to the actual `total_rewards` below):
```json
{
"ideal_rewards": [
...
{
"effective_balance": "32000000000",
"head": "18771",
"target": "18770",
"source": "18729",
"inclusion_delay": "17083",
"inactivity": "0"
}
],
"total_rewards": [
{
"validator_index": "0",
"head": "18729",
"target": "18770",
"source": "18771",
"inclusion_delay": "17083",
"inactivity": "0"
}
]
```
## Issue Addressed
N/A
## Proposed Changes
Add lints for rust 1.71
[3789134](3789134ae2) is probably the one that needs most attention as it changes beacon state code. I changed the `is_in_inactivity_leak ` function to return a `ArithError` as not all consumers of that function work well with a `BeaconState::Error`.
## Issue Addressed
Fix an issue observed by `@zlan` on Discord where Lighthouse would sometimes return this error when looking up states via the API:
> {"code":500,"message":"UNHANDLED_ERROR: ForkChoiceError(MissingProtoArrayBlock(0xc9cf1495421b6ef3215d82253b388d77321176a1dcef0db0e71a0cd0ffc8cdb7))","stacktraces":[]}
## Proposed Changes
The error stems from a faulty assumption in the HTTP API logic: that any state in the hot database must have its block in fork choice. This isn't true because the state's hot database may update much less frequently than the fork choice store, e.g. if reconstructing states (where freezer migration pauses), or if the freezer migration runs slowly. There could also be a race between loading the hot state and checking fork choice, e.g. even if the finalization migration of DB+fork choice were atomic, the update could happen between the 1st and 2nd calls.
To address this I've changed the HTTP API logic to use the finalized block's execution status as a fallback where it is safe to do so. In the case where a block is non-canonical and prior to finalization (permanently orphaned) we default `execution_optimistic` to `true`.
## Additional Info
I've also added a new CLI flag to reduce the frequency of the finalization migration as this is useful for several purposes:
- Spacing out database writes (less frequent, larger batches)
- Keeping a limited chain history with high availability, e.g. the last month in the hot database.
This new flag made it _substantially_ easier to test this change. It was extracted from `tree-states` (where it's called `--db-migration-period`), which is why this PR also carries the `tree-states` label.
## Issue Addressed
#4118
## Proposed Changes
This PR introduces a "progressive balances" cache on the `BeaconState`, which keeps track of the accumulated target attestation balance for the current & previous epochs. The cached values are utilised by fork choice to calculate unrealized justification and finalization (instead of converting epoch participation arrays to balances for each block we receive).
This optimization will be rolled out gradually to allow for more testing. A new `--progressive-balances disabled|checked|strict|fast` flag is introduced to support this:
- `checked`: enabled with checks against participation cache, and falls back to the existing epoch processing calculation if there is a total target attester balance mismatch. There is no performance gain from this as the participation cache still needs to be computed. **This is the default mode for now.**
- `strict`: enabled with checks against participation cache, returns error if there is a mismatch. **Used for testing only**.
- `fast`: enabled with no comparative checks and without computing the participation cache. This mode gives us the performance gains from the optimization. This is still experimental and not currently recommended for production usage, but will become the default mode in a future release.
- `disabled`: disable the usage of progressive cache, and use the existing method for FFG progression calculation. This mode may be useful if we find a bug and want to stop the frequent error logs.
### Tasks
- [x] Initial cache implementation in `BeaconState`
- [x] Perform checks in fork choice to compare the progressive balances cache against results from `ParticipationCache`
- [x] Add CLI flag, and disable the optimization by default
- [x] Testing on Goerli & Benchmarking
- [x] Move caching logic from state processing to the `ProgressiveBalancesCache` (see [this comment](https://github.com/sigp/lighthouse/pull/4362#discussion_r1230877001))
- [x] Add attesting balance metrics
Co-authored-by: Jimmy Chen <jimmy@sigmaprime.io>
## Issue Addressed
- #4293
- #4264
## Proposed Changes
*Changes largely follow those suggested in the main issue*.
- Add new routes to HTTP API
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Add new routes to `BeaconNodeHttpClient`
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Define new Eth2 common types
- `BroadcastValidation`, enum representing the level of validation to apply to blocks prior to broadcast
- `BroadcastValidationQuery`, the corresponding HTTP query string type for the above type
- ~~Define `_checked` variants of both `publish_block` and `publish_blinded_block` that enforce a validation level at a type level~~
- Add interactive tests to the `bn_http_api_tests` test target covering each validation level (to their own test module, `broadcast_validation_tests`)
- `beacon/blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- Only consensus pass (i.e., equivocates) (200)
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- `beacon/blinded_blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- ~~Only consensus pass (i.e., equivocates) (200)~~
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- Add a new trait, `IntoGossipVerifiedBlock`, which allows type-level guarantees to be made as to gossip validity
- Modify the structure of the `ObservedBlockProducers` cache from a `(slot, validator_index)` mapping to a `((slot, validator_index), block_root)` mapping
- Modify `ObservedBlockProducers::proposer_has_been_observed` to return a `SeenBlock` rather than a boolean on success
- Punish gossip peer (low) for submitting equivocating blocks
- Rename `BlockError::SlashablePublish` to `BlockError::SlashableProposal`
## Additional Info
This PR contains changes that directly modify how blocks are verified within the client. For more context, consult [comments in-thread](https://github.com/sigp/lighthouse/pull/4316#discussion_r1234724202).
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#3238
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Proposed Changes
Remove `max-skip-slots` checks when processing blocks.
This was legacy code which was previously used in the Medalla testnet to sync to the correct fork.
With the addition of checkpoint sync which allows us to sync to any arbitrary fork, this is no longer a necessary feature, so it has been removed for simplicity.
## Additional Notes
The CLI flag and checks for attestation processing have been retained as it still may have uses in DoS protection.
## Issue Addressed
Closes#4332
## Proposed Changes
Remove the `CountUnrealized` type, defaulting unrealized justification to _on_. This fixes the #4332 issue by ensuring that importing the same block to fork choice always results in the same outcome.
Finalized sync speed may be slightly impacted by this change, but that is deemed an acceptable trade-off until the optimisation from #4118 is implemented.
TODO:
- [x] Also check that the block isn't a duplicate before importing
## Issue Addressed
Closes#4354Closes#3987
Replaces #4305, #4283
## Proposed Changes
This switches the default slasher backend _back_ to LMDB.
If an MDBX database exists and the MDBX backend is enabled then MDBX will continue to be used. Our release binaries and Docker images will continue to include MDBX for as long as it is practical, so users of these should not notice any difference.
The main benefit is to users compiling from source and devs running tests. These users no longer have to struggle to compile MDBX and deal with the compatibility issues that arises. Similarly, devs don't need to worry about toggling feature flags in tests or risk forgetting to run the slasher tests due to backend issues.
## Issue Addressed
NA
## Proposed Changes
Adds metrics to track validators that are submitting equivocating (but not slashable) sync messages. This follows on from some research we've been doing in a separate fork of LH.
## Additional Info
@jimmygchen and @michaelsproul have already run their eyes over this so it should be easy to get into v4.2.0, IMO.
## Issue Addressed
#4281
## Proposed Changes
- Change `ShufflingCache` implementation from using `LruCache` to a custom cache that removes entry with lowest epoch instead of oldest insertion time.
- Protect the "enshrined" head shufflings when inserting new committee cache entries. The shuffling ids matching the head's previous, current, and future epochs will never be ejected from the cache during `Self::insert_cache_item`.
## Additional Info
There is a bonus point on shuffling preferences in the issue description that hasn't been implemented yet, as I haven't figured out a good way to do this:
> However I'm not convinced since there are some complexities around tie-breaking when two entries have the same epoch. Perhaps preferring entries in the canonical chain is best?
We should be able to check if a block is on the canonical chain by:
```rust
canonical_head
.fork_choice_read_lock()
.contains_block(root)
```
However we need to interleave the shuffling and fork choice locks, which may cause deadlocks if we're not careful (mentioned by @paulhauner). Alternatively, we could use the `state.block_roots` field of the `chain.canonical_head.snapshot.beacon_state`, which avoids deadlock but requires more work.
I'd like to get some feedback on review & testing before I dig deeper into the preferences stuff, as having the canonical head preference may already be quite useful in preventing the issue raised.
Co-authored-by: Jimmy Chen <jimmy@sigmaprime.io>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/4291, part of #3613.
## Proposed Changes
- Implement the `el_offline` field on `/eth/v1/node/syncing`. We set `el_offline=true` if:
- The EL's internal status is `Offline` or `AuthFailed`, _or_
- The most recent call to `newPayload` resulted in an error (more on this in a moment).
- Use the `el_offline` field in the VC to mark nodes with offline ELs as _unsynced_. These nodes will still be used, but only after synced nodes.
- Overhaul the usage of `RequireSynced` so that `::No` is used almost everywhere. The `--allow-unsynced` flag was broken and had the opposite effect to intended, so it has been deprecated.
- Add tests for the EL being offline on the upcheck call, and being offline due to the newPayload check.
## Why track `newPayload` errors?
Tracking the EL's online/offline status is too coarse-grained to be useful in practice, because:
- If the EL is timing out to some calls, it's unlikely to timeout on the `upcheck` call, which is _just_ `eth_syncing`. Every failed call is followed by an upcheck [here](693886b941/beacon_node/execution_layer/src/engines.rs (L372-L380)), which would have the effect of masking the failure and keeping the status _online_.
- The `newPayload` call is the most likely to time out. It's the call in which ELs tend to do most of their work (often 1-2 seconds), with `forkchoiceUpdated` usually returning much faster (<50ms).
- If `newPayload` is failing consistently (e.g. timing out) then this is a good indication that either the node's EL is in trouble, or the network as a whole is. In the first case validator clients _should_ prefer other BNs if they have one available. In the second case, all of their BNs will likely report `el_offline` and they'll just have to proceed with trying to use them.
## Additional Changes
- Add utility method `ForkName::latest` which is quite convenient for test writing, but probably other things too.
- Delete some stale comments from when we used to support multiple execution nodes.
## Issue Addressed
#4233
## Proposed Changes
Remove the `best_justified_checkpoint` from the `PersistedForkChoiceStore` type as it is now unused.
Additionally, remove the `Option`'s wrapping the `justified_checkpoint` and `finalized_checkpoint` fields on `ProtoNode` which were only present to facilitate a previous migration.
Include the necessary code to facilitate the migration to a new DB schema.
## Issue Addressed
Addresses #4238
## Proposed Changes
- [x] Add tests for the scenarios
- [x] Use the fork of the attestation slot for signature verification.
## Issue Addressed
Addresses #4234
## Proposed Changes
- Skip withdrawals processing in an inconsistent state replay.
- Repurpose `StateRootStrategy`: rename to `StateProcessingStrategy` and always skip withdrawals if using `StateProcessingStrategy::Inconsistent`
- Add a test to reproduce the scenario
Co-authored-by: Jimmy Chen <jimmy@sigmaprime.io>
## Limit Backfill Sync
This PR transitions Lighthouse from syncing all the way back to genesis to only syncing back to the weak subjectivity point (~ 5 months) when syncing via a checkpoint sync.
There are a number of important points to note with this PR:
- Firstly and most importantly, this PR fundamentally shifts the default security guarantees of checkpoint syncing in Lighthouse. Prior to this PR, Lighthouse could verify the checkpoint of any given chain by ensuring the chain eventually terminates at the corresponding genesis. This guarantee can still be employed via the new CLI flag --genesis-backfill which will prompt lighthouse to the old behaviour of downloading all blocks back to genesis. The new behaviour only checks the proposer signatures for the last 5 months of blocks but cannot guarantee the chain matches the genesis chain.
- I have not modified any of the peer scoring or RPC responses. Clients syncing from gensis, will downscore new Lighthouse peers that do not possess blocks prior to the WSP. This is by design, as Lighthouse nodes of this form, need a mechanism to sort through peers in order to find useful peers in order to complete their genesis sync. We therefore do not discriminate between empty/error responses for blocks prior or post the local WSP. If we request a block that a peer does not posses, then fundamentally that peer is less useful to us than other peers.
- This will make a radical shift in that the majority of nodes will no longer store the full history of the chain. In the future we could add a pruning mechanism to remove old blocks from the db also.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
This PR un-deprecates some commonly used test util functions, e.g. `extend_chain`. Most of these were deprecated in 2020 but some of us still found them quite convenient and they're still being used a lot. If there's no issue with using them, I think we should remove the "Deprecated" comment to avoid confusion.
## Proposed Changes
Builds on #4028 to use the new payload bodies methods in the HTTP API as well.
## Caveats
The payloads by range method only works for the finalized chain, so it can't be used in the execution engine integration tests because we try to reconstruct unfinalized payloads there.
## Issue Addressed
NA
## Proposed Changes
Apply two changes to code introduced in #4179:
1. Remove the `ERRO` log for when we error on `proposer_has_been_observed()`. We were seeing a lot of this in our logs for finalized blocks and it's a bit noisy.
1. Use `false` rather than `true` for `proposal_already_known` when there is an error. If a block raises an error in `proposer_has_been_observed()` then the block must be invalid, so we should process (and reject) it now rather than queuing it.
For reference, here is one of the offending `ERRO` logs:
```
ERRO Failed to check observed proposers block_root: 0x5845…878e, source: rpc, error: FinalizedBlock { slot: Slot(5410983), finalized_slot: Slot(5411232) }
```
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Similar to #4181 but without the version bump and a more nuanced fix.
Patches the high CPU usage seen after the Capella fork which was caused by processing exits when there are skip slots.
## Additional Info
~~This is an imperfect solution that will cause us to drop some exits at the fork boundary. This is tracked at #4184.~~
## Proposed Changes
We already make some attempts to avoid processing RPC blocks when a block from the same proposer is already being processed through gossip. This PR strengthens that guarantee by using the existing cache for `observed_block_producers` to inform whether an RPC block's processing should be delayed.
## Proposed Changes
This change attempts to prevent failed re-orgs by:
1. Lowering the re-org cutoff from 2s to 1s. This is informed by a failed re-org attempted by @yorickdowne's node. The failed block was requested in the 1.5-2s window due to a Vouch failure, and failed to propagate to the majority of the network before the attestation deadline at 4s.
2. Allow users to adjust their re-org cutoff depending on observed network conditions and their risk profile. The static 2 second cutoff was too rigid.
3. Add a `--proposer-reorg-disallowed-offsets` flag which can be used to prohibit reorgs at certain slots. This is intended to help workaround an issue whereby reorging blocks at slot 1 are currently taking ~1.6s to propagate on gossip rather than ~500ms. This is suspected to be due to a cache miss in current versions of Prysm, which should be fixed in their next release.
## Additional Info
I'm of two minds about removing the `shuffling_stable` check which checks for blocks at slot 0 in the epoch. If we removed it users would be able to configure Lighthouse to try reorging at slot 0, which likely wouldn't work very well due to interactions with the proposer index cache. I think we could leave it for now and revisit it later.
## Issue Addressed
#3212
## Proposed Changes
- Introduce a new `rate_limiting_backfill_queue` - any new inbound backfill work events gets immediately sent to this FIFO queue **without any processing**
- Spawn a `backfill_scheduler` routine that pops a backfill event from the FIFO queue at specified intervals (currently halfway through a slot, or at 6s after slot start for 12s slots) and sends the event to `BeaconProcessor` via a `scheduled_backfill_work_tx` channel
- This channel gets polled last in the `InboundEvents`, and work event received is wrapped in a `InboundEvent::ScheduledBackfillWork` enum variant, which gets processed immediately or queued by the `BeaconProcessor` (existing logic applies from here)
Diagram comparing backfill processing with / without rate-limiting:
https://github.com/sigp/lighthouse/issues/3212#issuecomment-1386249922
See this comment for @paulhauner's explanation and solution: https://github.com/sigp/lighthouse/issues/3212#issuecomment-1384674956
## Additional Info
I've compared this branch (with backfill processing rate limited to to 1 and 3 batches per slot) against the latest stable version. The CPU usage during backfill sync is reduced by ~5% - 20%, more details on this page:
https://hackmd.io/@jimmygchen/SJuVpJL3j
The above testing is done on Goerli (as I don't currently have hardware for Mainnet), I'm guessing the differences are likely to be bigger on mainnet due to block size.
### TODOs
- [x] Experiment with processing multiple batches per slot. (need to think about how to do this for different slot durations)
- [x] Add option to disable rate-limiting, enabed by default.
- [x] (No longer required now we're reusing the reprocessing queue) Complete the `backfill_scheduler` task when backfill sync is completed or not required
## Issue Addressed
#3708
## Proposed Changes
- Add `is_finalized_block` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `is_finalized_state` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `fork_and_execution_optimistic_and_finalized` in `beacon_node/http_api/src/state_id.rs`.
- Add `ExecutionOptimisticFinalizedForkVersionedResponse` type in `consensus/types/src/fork_versioned_response.rs`.
- Add `execution_optimistic_finalized_fork_versioned_response`function in `beacon_node/http_api/src/version.rs`.
- Add `ExecutionOptimisticFinalizedResponse` type in `common/eth2/src/types.rs`.
- Add `add_execution_optimistic_finalized` method in `common/eth2/src/types.rs`.
- Update API response methods to include finalized.
- Remove `execution_optimistic_fork_versioned_response`
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
- Implements https://github.com/ethereum/consensus-specs/pull/3290/
- Bumps `ef-tests` to [v1.3.0-rc.4](https://github.com/ethereum/consensus-spec-tests/releases/tag/v1.3.0-rc.4).
The `CountRealizedFull` concept has been removed and the `--count-unrealized-full` and `--count-unrealized` BN flags now do nothing but log a `WARN` when used.
## Database Migration Debt
This PR removes the `best_justified_checkpoint` from fork choice. This field is persisted on-disk and the correct way to go about this would be to make a DB migration to remove the field. However, in this PR I've simply stubbed out the value with a junk value. I've taken this approach because if we're going to do a DB migration I'd love to remove the `Option`s around the justified and finalized checkpoints on `ProtoNode` whilst we're at it. Those options were added in #2822 which was included in Lighthouse v2.1.0. The options were only put there to handle the migration and they've been set to `Some` ever since v2.1.0. There's no reason to keep them as options anymore.
I started adding the DB migration to this branch but I started to feel like I was bloating this rather critical PR with nice-to-haves. I've kept the partially-complete migration [over in my repo](https://github.com/paulhauner/lighthouse/tree/fc-pr-18-migration) so we can pick it up after this PR is merged.
This PR enables the user to adjust the shuffling cache size.
This is useful for some HTTP API requests which require re-computing old shufflings. This PR currently optimizes the
beacon/states/{state_id}/committees HTTP API by first checking the cache before re-building shuffling.
If the shuffling is set to a non-default value, then the HTTP API request will also fill the cache when as it constructs new shufflings.
If the CLI flag is not present or the value is set to the default of 16 the default behaviour is observed.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
When producing a block from a builder, there are two points where we could consider the block "broadcast":
1. When the blinded block is published to the builder.
2. When the un-blinded block is published to the P2P network (this is always *after* the previous step).
Our logging for late block broadcasts was using (2) for builder-blocks, which was creating a lot of false-positive logs. This is because the builder publishes the block on the P2P network themselves before returning it to us and we perform (2). For clarity, the logs were false-positives because we claim that the block was published late by us when it was actually published earlier by the builder.
This PR changes our logging behavior so we do our logging at (1) instead. It also updates our metrics for block broadcast to distinguish between local and builder blocks. I believe the metrics change will be natively compatible with existing Grafana dashboards.
## Additional Info
One could argue that the builder *should* return the block to us faster, however that's not the case. I think it's more important that we don't desensitize users with false-positives.
## Issue Addressed
Closes#3814, replaces #3818.
## Proposed Changes
* Add a WARN log for the case where we are attempting to sync chain segments but can't process them because they're building on an invalid parent. The most common case where we see this is when the execution node database is corrupt, causing sync to stall mysteriously (because we're currently logging the failure only at debug level).
* Additionally I've bumped up the logging for invalid execution payloads to `WARN`. This may result in some duplicate logs as we log errors from the `beacon_chain` and then again from the beacon processor. Invalid payloads and corrupt DBs _should_ be rare enough that this doesn't produce overwhelming log volume.
## Issue Addressed
In #4027 I forgot to add the `parent_block_number` to the payload attributes SSE.
## Proposed Changes
Compute the parent block number while computing the pre-payload attributes. Pass it on to the SSE stream.
## Additional Info
Not essential for v3.5.1 as I suspect most builders don't need the `parent_block_root`. I would like to use it for my dummy no-op builder however.
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse.
## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port
### Rough list of code changes
- Discovery:
- Table filter and ip mode set to match the listening config.
- Ipv6 address, tcp port and udp port set in the ENR builder
- Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
- Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
- No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
- Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
- Add fields to configure Ipv6 udp and tcp ports in the ENR
- Include advertised enr Ipv6 address.
- Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
- Kept only for ipv4
- Cli flags:
- `--listen-addresses` now can take up to two values
- `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
- `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
- `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
- `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
- `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-udp6-port` Added to configure the enr udp6 field.
- `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-tcp6-port` Added to configure the enr tcp6 field.
- `--enr-addresses` now can take two values.
- `--enr-match` updated behaviour.
- Common:
- rename `unused_port` functions to specify that they are over ipv4.
- add functions to get unused ports over ipv6.
- Testing binaries
- Updated code to reflect network config changes and unused_port changes.
## Additional Info
TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
## Proposed Changes
Two tiny updates to satisfy Clippy 1.68
Plus refactoring of the `http_api` into less complex types so the compiler can chew and digest them more easily.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#3896Closes#3998Closes#3700
## Proposed Changes
- Optimise the calculation of withdrawals for payload attributes by avoiding state clones, avoiding unnecessary state advances and reading from the snapshot cache if possible.
- Use the execution layer's payload attributes cache to avoid re-calculating payload attributes. I actually implemented a new LRU cache just for withdrawals but it had the exact same key and most of the same data as the existing payload attributes cache, so I deleted it.
- Add a new SSE event that fires when payloadAttributes are calculated. This is useful for block builders, a la https://github.com/ethereum/beacon-APIs/issues/244.
- Add a new CLI flag `--always-prepare-payload` which forces payload attributes to be sent with every fcU regardless of connected proposers. This is intended for use by builders/relays.
For maximum effect, the flags I've been using to run Lighthouse in "payload builder mode" are:
```
--always-prepare-payload \
--prepare-payload-lookahead 12000 \
--suggested-fee-recipient 0x0000000000000000000000000000000000000000
```
The fee recipient is required so Lighthouse has something to pack in the payload attributes (it can be ignored by the builder). The lookahead causes fcU to be sent at the start of every slot rather than at 8s. As usual, fcU will also be sent after each change of head block. I think this combination is sufficient for builders to build on all viable heads. Often there will be two fcU (and two payload attributes) sent for the same slot: one sent at the start of the slot with the head from `n - 1` as the parent, and one sent after the block arrives with `n` as the parent.
Example usage of the new event stream:
```bash
curl -N "http://localhost:5052/eth/v1/events?topics=payload_attributes"
```
## Additional Info
- [x] Tests added by updating the proposer re-org tests. This has the benefit of testing the proposer re-org code paths with withdrawals too, confirming that the new changes don't interact poorly.
- [ ] Benchmarking with `blockdreamer` on devnet-7 showed promising results but I'm yet to do a comparison to `unstable`.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
