## Issue Addressed
CI is plagued by `AddrAlreadyInUse` failures, which are caused by race conditions in allocating free ports.
This PR removes all usages of the `unused_port` crate for Lighthouse's HTTP API, in favour of passing `:0` as the listen address. As a result, the listen address isn't known ahead of time and must be read from the listening socket after it binds. This requires tying some self-referential knots, which is a little disruptive, but hopefully doesn't clash too much with Deneb 🤞
There are still a few usages of `unused_tcp4_port` left in cases where we start external processes, like the `watch` Postgres DB, Anvil, Geth, Nethermind, etc. Removing these usages is non-trivial because it's hard to read the port back from an external process after starting it with `--port 0`. We might be able to do something on Linux where we read from `/proc/`, but I'll leave that for future work.
* move length update outside of if let in LRU cache
* add comment and use hex for G1_POINT_AT_INFINITY
* remove some misleading comments from `ssz_snappy`
* make sure we can't overflow on blobs by range requests with large counts
* downgrade gossip verification internal availability check error
* change blob rpc responses from BlockingFnWithManualSendOnIdle to BlockingFn
* remove unnecessary collect in blobs by range response
* add a comment to blobs by range response start slot logic
* typo persist_data_availabilty_checker -> persist_data_availability_checker
* unify cheap_state_advance_to_obtain_committees
## Issue Addressed
#4402
## Proposed Changes
This PR adds QUIC support to Lighthouse. As this is not officially spec'd this will only work between lighthouse <-> lighthouse connections. We attempt a QUIC connection (if the node advertises it) and if it fails we fallback to TCP.
This should be a backwards compatible modification. We want to test this functionality on live networks to observe any improvements in bandwidth/latency.
NOTE: This also removes the websockets transport as I believe no one is really using it. It should be mentioned in our release however.
Co-authored-by: João Oliveira <hello@jxs.pt>
* increase the max topic subscriptions #4581
* make the max_subscription limitation based off constants / configuration
* format
* wording & add deneb topic array
* reduce max_subscriptions_per_request to 2x
* format
* update comment
* Update comments and small cleanup.
* Deserialize into `SsePayloadAttributesV3` for Deneb fork. Update `SignedBlockContents::blobs_cloned` to return blobs for `BlindedBlockAndBlobSidecars`.
* Improve code readability and error handling when converting blinded block into full block.
## Proposed Changes
New release to replace the cancelled v4.4.0 release.
This release includes the bugfix #4687 which avoids a deadlock that was present in v4.4.0.
## Additional Info
Awaiting testing over the weekend this will be merged Monday September 4th.
## Issue Addressed
Fix a deadlock introduced in #4236 which was caught during the v4.4.0 release testing cycle (with thanks to @paulhauner and `gdb`).
## Proposed Changes
Avoid re-locking the fork choice read lock when querying a state by root in the HTTP API. This avoids a deadlock due to the lock already being held.
## Additional Info
The [RwLock docs](https://docs.rs/lock_api/latest/lock_api/struct.RwLock.html#method.read) explicitly advise against re-locking:
> Note that attempts to recursively acquire a read lock on a RwLock when the current thread already holds one may result in a deadlock.
## Issue Addressed
Fix a bug in the storage of the linear block roots array in the freezer DB. Previously this array was always written as part of state storage (or block backfill). With state pruning enabled by #4610, these states were no longer being written and as a result neither were the block roots.
The impact is quite low, we would just log an error when trying to forwards-iterate the block roots, which for validating nodes only happens when they try to look up blocks for peers:
> Aug 25 03:42:36.980 ERRO Missing chunk in forwards iterator chunk index: 49726, service: freezer_db
Any node checkpoint synced off `unstable` is affected and has a corrupt database. If you see the log above, you need to re-sync with the fix. Nodes that haven't checkpoint synced recently should _not_ be corrupted, even if they ran the buggy version.
## Proposed Changes
- Use a `ChunkWriter` to write the block roots when states are not being stored.
- Tweak the usage of `get_latest_restore_point` so that it doesn't return a nonsense value when state pruning is enabled.
- Tweak the guarantee on the block roots array so that block roots are assumed available up to the split slot (exclusive). This is a bit nicer than relying on anything to do with the latest restore point, which is a nonsensical concept when there aren't any restore points.
## Additional Info
I'm looking forward to deleting the chunked vector code for good when we merge tree-states 😁
## Issue Addressed
NA
## Proposed Changes
Add the Holesky network config as per 36e4ff2d51/custom_config_data.
Since the genesis state is ~190MB, I've opted to *not* include it in the binary and instead download it at runtime (see #4564 for context). To download this file we have:
- A hard-coded URL for a SigP-hosted S3 bucket with the Holesky genesis state. Assuming this download works correctly, users will be none the wiser that the state wasn't included in the binary (apart from some additional logs)
- If the user provides a `--checkpoint-sync-url` flag, then LH will download the genesis state from that server rather than our S3 bucket.
- If the user provides a `--genesis-state-url` flag, then LH will download the genesis state from that server regardless of the S3 bucket or `--checkpoint-sync-url` flag.
- Whenever a genesis state is downloaded it is checked against a checksum baked into the binary.
- A genesis state will never be downloaded if it's already included in the binary.
- There is a `--genesis-state-url-timeout` flag to tweak the timeout for downloading the genesis state file.
## Log Output
Example of log output when a state is downloaded:
```bash
Aug 23 05:40:13.424 INFO Logging to file path: "/Users/paul/.lighthouse/holesky/beacon/logs/beacon.log"
Aug 23 05:40:13.425 INFO Lighthouse started version: Lighthouse/v4.3.0-bd9931f+
Aug 23 05:40:13.425 INFO Configured for network name: holesky
Aug 23 05:40:13.426 INFO Data directory initialised datadir: /Users/paul/.lighthouse/holesky
Aug 23 05:40:13.427 INFO Deposit contract address: 0x4242424242424242424242424242424242424242, deploy_block: 0
Aug 23 05:40:13.427 INFO Downloading genesis state info: this may take some time on testnets with large validator counts, timeout: 60s, server: https://sigp-public-genesis-states.s3.ap-southeast-2.amazonaws.com/
Aug 23 05:40:29.895 INFO Starting from known genesis state service: beacon
```
Example of log output when there are no URLs specified:
```
Aug 23 06:29:51.645 INFO Logging to file path: "/Users/paul/.lighthouse/goerli/beacon/logs/beacon.log"
Aug 23 06:29:51.646 INFO Lighthouse started version: Lighthouse/v4.3.0-666a39c+
Aug 23 06:29:51.646 INFO Configured for network name: goerli
Aug 23 06:29:51.647 INFO Data directory initialised datadir: /Users/paul/.lighthouse/goerli
Aug 23 06:29:51.647 INFO Deposit contract address: 0xff50ed3d0ec03ac01d4c79aad74928bff48a7b2b, deploy_block: 4367322
The genesis state is not present in the binary and there are no known download URLs. Please use --checkpoint-sync-url or --genesis-state-url.
```
## Additional Info
I tested the `--genesis-state-url` flag with all 9 Goerli checkpoint sync servers on https://eth-clients.github.io/checkpoint-sync-endpoints/ and they all worked 🎉
My IDE eagerly formatted some `Cargo.toml`. I've disabled it but I don't see the value in spending time reverting the changes that are already there.
I also added the `GenesisStateBytes` enum to avoid an unnecessary clone on the genesis state bytes baked into the binary. This is not a huge deal on Mainnet, but will become more relevant when testing with big genesis states.
When we do a fresh checkpoint sync we're downloading the genesis state to check the `genesis_validators_root` against the finalised state we receive. This is not *entirely* pointless, since we verify the checksum when we download the genesis state so we are actually guaranteeing that the finalised state is on the same network. There might be a smarter/less-download-y way to go about this, but I've run out of cycles to figure that out. Perhaps we can grab it in the next release?
## Issue Addressed
N/A
## Proposed Changes
Remove the `hidden(true)` modifier on the `--gui` flag so it shows up when running `lighthouse bn --help`
## Additional Info
We need to include this now that Siren has had its first stable release.
## Issue Addressed
#4654
## Proposed Changes
Only log error if we're unable to read slot clock after genesis.
I thought about simply down grading the `error` to a `warn`, but feel like it's still unnecessary noise before genesis, and it would be good to retain error log if we're pass genesis. But I'd be ok with just downgrading the log level, too.
## Issue Addressed
Closes#4473 (take 3)
## Proposed Changes
- Send a 202 status code by default for duplicate blocks, instead of 400. This conveys to the caller that the block was published, but makes no guarantees about its validity. Block relays can count this as a success or a failure as they wish.
- For users wanting finer-grained control over which status is returned for duplicates, a flag `--http-duplicate-block-status` can be used to adjust the behaviour. A 400 status can be supplied to restore the old (spec-compliant) behaviour, or a 200 status can be used to silence VCs that warn loudly for non-200 codes (e.g. Lighthouse prior to v4.4.0).
- Update the Lighthouse VC to gracefully handle success codes other than 200. The info message isn't the nicest thing to read, but it covers all bases and isn't a nasty `ERRO`/`CRIT` that will wake anyone up.
## Additional Info
I'm planning to raise a PR to `beacon-APIs` to specify that clients may return 202 for duplicate blocks. Really it would be nice to use some 2xx code that _isn't_ the same as the code for "published but invalid". I think unfortunately there aren't any suitable codes, and maybe the best fit is `409 CONFLICT`. Given that we need to fix this promptly for our release, I think using the 202 code temporarily with configuration strikes a nice compromise.
## Issue Addressed
updates underlying dependencies and removes the ignored `RUSTSEC`'s for `cargo audit`.
Also switches `procinfo` to `procfs` on `eth2` to remove the `nom` warning, `procinfo` is unmaintained see [here](https://github.com/danburkert/procinfo-rs/issues/46).
## Issue Addressed
Fixes a bug in the handling of `--beacon-process-max-workers` which caused it to have no effect.
## Proposed Changes
For this PR I channeled @ethDreamer and saw deep into the faulty CLI config -- this bug is almost identical to the one Mark found and fixed in #4622.
## Issue Addressed
Closes#3210Closes#3211
## Proposed Changes
- Checkpoint sync from the latest finalized state regardless of its alignment.
- Add the `block_root` to the database's split point. This is _only_ added to the in-memory split in order to avoid a schema migration. See `load_split`.
- Add a new method to the DB called `get_advanced_state`, which looks up a state _by block root_, with a `state_root` as fallback. Using this method prevents accidental accesses of the split's unadvanced state, which does not exist in the hot DB and is not guaranteed to exist in the freezer DB at all. Previously Lighthouse would look up this state _from the freezer DB_, even if it was required for block/attestation processing, which was suboptimal.
- Replace several state look-ups in block and attestation processing with `get_advanced_state` so that they can't hit the split block's unadvanced state.
- Do not store any states in the freezer database by default. All states will be deleted upon being evicted from the hot database unless `--reconstruct-historic-states` is set. The anchor info which was previously used for checkpoint sync is used to implement this, including when syncing from genesis.
## Additional Info
Needs further testing. I want to stress-test the pruned database under Hydra.
The `get_advanced_state` method is intended to become more relevant over time: `tree-states` includes an identically named method that returns advanced states from its in-memory cache.
Co-authored-by: realbigsean <seananderson33@gmail.com>
* remove protoc and token from network tests github action
* delete unused beacon chain methods
* downgrade writing blobs to store log
* reduce diff in block import logic
* remove some todo's and deneb built in network
* remove unnecessary error, actually use some added metrics
* remove some metrics, fix missing components on publish funcitonality
* fix status tests
* rename sidecar by root to blobs by root
* clean up some metrics
* remove unnecessary feature gate from attestation subnet tests, clean up blobs by range response code
* pawan's suggestion in `protocol_info`, peer score in matching up batch sync block and blobs
* fix range tests for deneb
* pub block and blob db cache behind the same mutex
* remove unused errs and an empty file
* move sidecar trait to new file
* move types from payload to eth2 crate
* update comment and add flag value name
* make function private again, remove allow unused
* use reth rlp for tx decoding
* fix compile after merge
* rename kzg commitments
* cargo fmt
* remove unused dep
* Update beacon_node/execution_layer/src/lib.rs
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Update beacon_node/beacon_processor/src/lib.rs
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* pawan's suggestiong for vec capacity
* cargo fmt
* Revert "use reth rlp for tx decoding"
This reverts commit 5181837d81c66dcca4c960a85989ac30c7f806e2.
* remove reth rlp
---------
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Update mock builder, mev-rs dependencies, eth2 lib to support deneb builder flow
* Replace `sharingForkTime` with `cancunTime`
* Patch `ethereum-consensus` to include some deneb-devnet-8 changes
* Add deneb builder test and fix block contents deserialization
* Fix builder bid encoding issue and passing deneb builder test \o/
* Fix test compilation
* Revert `cancunTime` change in genesis to pass doppelganger tests
Since `tolerant_current_epoch` is expected to be either `current_epoch` or `current_epoch+1`, we can eliminate a case here.
And added a comment about `compute_historic_attester_duties` , since `RelativeEpoch::from_epoch` will only allow `request_epoch == current_epoch-1` when `request_epoch < current_epoch`.
## Issue Addressed
Closes#4245
## Proposed Changes
- If an SSE channel fills up, send a comment instead of terminating the stream.
- Add a CLI flag for scaling up the SSE buffer: `--http-sse-capacity-multiplier N`.
## Additional Info
~~Blocked on #4462. I haven't rebased on that PR yet for initial testing, because it still needs some more work to handle long-running HTTP threads.~~
- [x] Add CLI flag tests.
## Issue Addressed
The feature flag used to control this feature is `disable_backfill` instead of `disable-backfill`.
kudos to @michaelsproul for discovering this bug!
## Issue Addressed
Closes#3404 (mostly)
## Proposed Changes
- Remove all uses of Warp's `and_then` (which backtracks) in favour of `then` (which doesn't).
- Bump the priority of the `POST` method for `v2/blocks` to `P0`. Publishing a block needs to happen quickly.
- Run the new SSZ POST endpoints on the beacon processor. I think this was missed in between merging #4462 and #4504/#4479.
- Fix a minor issue in the validator registrations endpoint whereby an error from spawning the task on the beacon processor would be dropped.
## Additional Info
I've tested this manually and can confirm that we no longer get the dreaded `Unsupported endpoint version` errors for queries like:
```
$ curl -X POST -H "Content-Type: application/json" --data @block.json "http://localhost:5052/eth/v2/beacon/blocks" | jq
{
"code": 400,
"message": "BAD_REQUEST: WeakSubjectivityConflict",
"stacktraces": []
}
```
```
$ curl -X POST -H "Content-Type: application/octet-stream" --data @block.json "http://localhost:5052/eth/v2/beacon/blocks" | jq
{
"code": 400,
"message": "BAD_REQUEST: invalid SSZ: OffsetOutOfBounds(572530811)",
"stacktraces": []
}
```
```
$ curl "http://localhost:5052/eth/v2/validator/blocks/7067595"
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
However, I can still trigger it by leaving off the `Content-Type`. We can re-test this aspect with #4575.
## Issue Addressed
#4538
## Proposed Changes
add newtype wrapper around DialError that extracts error messages and logs them in a more readable format
## Additional Info
I was able to test Transport Dial Errors in the situation where a libp2p instance attempts to ping a nonexistent peer. That error message should look something like
`A transport level error has ocurred: Connection refused (os error 61)`
AgeManning mentioned we should try fetching only the most inner error (in situations where theres a nested error). I took a stab at implementing that
For non transport DialErrors, I wrote out the error messages explicitly (as per the docs). Could potentially clean things up here if thats not necessary
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
Rather than spawning new tasks on the tokio executor to process each HTTP API request, send the tasks to the `BeaconProcessor`. This achieves:
1. Places a bound on how many concurrent requests are being served (i.e., how many we are actually trying to compute at one time).
1. Places a bound on how many requests can be awaiting a response at one time (i.e., starts dropping requests when we have too many queued).
1. Allows the BN prioritise HTTP requests with respect to messages coming from the P2P network (i.e., proiritise importing gossip blocks rather than serving API requests).
Presently there are two levels of priorities:
- `Priority::P0`
- The beacon processor will prioritise these above everything other than importing new blocks.
- Roughly all validator-sensitive endpoints.
- `Priority::P1`
- The beacon processor will prioritise practically all other P2P messages over these, except for historical backfill things.
- Everything that's not `Priority::P0`
The `--http-enable-beacon-processor false` flag can be supplied to revert back to the old behaviour of spawning new `tokio` tasks for each request:
```
--http-enable-beacon-processor <BOOLEAN>
The beacon processor is a scheduler which provides quality-of-service and DoS protection. When set to
"true", HTTP API requests will queued and scheduled alongside other tasks. When set to "false", HTTP API
responses will be executed immediately. [default: true]
```
## New CLI Flags
I added some other new CLI flags:
```
--beacon-processor-aggregate-batch-size <INTEGER>
Specifies the number of gossip aggregate attestations in a signature verification batch. Higher values may
reduce CPU usage in a healthy network while lower values may increase CPU usage in an unhealthy or hostile
network. [default: 64]
--beacon-processor-attestation-batch-size <INTEGER>
Specifies the number of gossip attestations in a signature verification batch. Higher values may reduce CPU
usage in a healthy network whilst lower values may increase CPU usage in an unhealthy or hostile network.
[default: 64]
--beacon-processor-max-workers <INTEGER>
Specifies the maximum concurrent tasks for the task scheduler. Increasing this value may increase resource
consumption. Reducing the value may result in decreased resource usage and diminished performance. The
default value is the number of logical CPU cores on the host.
--beacon-processor-reprocess-queue-len <INTEGER>
Specifies the length of the queue for messages requiring delayed processing. Higher values may prevent
messages from being dropped while lower values may help protect the node from becoming overwhelmed.
[default: 12288]
```
I needed to add the max-workers flag since the "simulator" flavor tests started failing with HTTP timeouts on the test assertions. I believe they were failing because the Github runners only have 2 cores and there just weren't enough workers available to process our requests in time. I added the other flags since they seem fun to fiddle with.
## Additional Info
I bumped the timeouts on the "simulator" flavor test from 4s to 8s. The prioritisation of consensus messages seems to be causing slower responses, I guess this is what we signed up for 🤷
The `validator/register` validator has some special handling because the relays have a bad habit of timing out on these calls. It seems like a waste of a `BeaconProcessor` worker to just wait for the builder API HTTP response, so we spawn a new `tokio` task to wait for a builder response.
I've added an optimisation for the `GET beacon/states/{state_id}/validators/{validator_id}` endpoint in [efbabe3](efbabe3252). That's the endpoint the VC uses to resolve pubkeys to validator indices, and it's the endpoint that was causing us grief. Perhaps I should move that into a new PR, not sure.
* remove closure from `check_availability_mayb_import`
* impove logging, add wrapper struct to requested ids
* improve logging
* only log if we're in deneb. Only delay lookup if we're in deneb
* fix bug in missing components check
* Low hanging fruits
* Remove unnecessary todo
I think it's fine to not handle this since the calling functions handle the error.
No specific reason imo to handle it in the function as well.
* Rename BlobError to GossipBlobError
I feel this signified better what the error is for. The BlobError was only for failures when gossip
verifying a blob. We cannot get this error when doing rpc validation
* Remove the BlockError::BlobValidation variant
This error was only there to appease gossip verification before publish.
It's unclear how to peer score this error since this cannot actually occur during any
block verification flows.
This commit introuduces an additional error type BlockContentsError to better represent the
Error type
* Add docs for peer scoring (or lack thereof) of AvailabilityCheck errors
* I do not see a non-convoluted way of doing this. Okay to have some redundant code here
* Removing this to catch the failure red handed
* Fix compilation
* Cannot be deleted because some tests assume the trait impl
Also useful to have around for testing in the future imo
* Add some metrics and logs
* Only process `Imported` variant in sync_methods
The only additional thing for other variants that might be useful is logging. We can do that
later if required
* Convert to TryFrom
Not really sure where this would be used, but just did what the comment says.
Could consider just returning the Block variant for a deneb block in the From version
* Unlikely to change now
* This is fine as this is max_rpc_size per rpc chunk (for blobs, it would be 128kb max)
* Log count instead of individual blobs, can delete log later if it becomes too annoying.
* Add block production blob verification timer
* Extend block_straemer test to deneb
* Remove dbg statement
* Fix tests
## Issue Addressed
Addresses [#4401](https://github.com/sigp/lighthouse/issues/4401)
## Proposed Changes
Shift some constants into ```ChainSpec``` and remove the constant values from code space.
## Additional Info
I mostly used ```MainnetEthSpec::default_spec()``` for getting ```ChainSpec```. I wonder Did I make a mistake about that.
Co-authored-by: armaganyildirak <armaganyildirak@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Upgrade libp2p to v0.52
## Proposed Changes
- **Workflows**: remove installation of `protoc`
- **Book**: remove installation of `protoc`
- **`Dockerfile`s and `cross`**: remove custom base `Dockerfile` for cross since it's no longer needed. Remove `protoc` from remaining `Dockerfiles`s
- **Upgrade `discv5` to `v0.3.1`:** we have some cool stuff in there: no longer needs `protoc` and faster ip updates on cold start
- **Upgrade `prometheus` to `0.21.0`**, now it no longer needs encoding checks
- **things that look like refactors:** bunch of api types were renamed and need to be accessed in a different (clearer) way
- **Lighthouse network**
- connection limits is now a behaviour
- banned peers no longer exist on the swarm level, but at the behaviour level
- `connection_event_buffer_size` now is handled per connection with a buffer size of 4
- `mplex` is deprecated and was removed
- rpc handler now logs the peer to which it belongs
## Additional Info
Tried to keep as much behaviour unchanged as possible. However, there is a great deal of improvements we can do _after_ this upgrade:
- Smart connection limits: Connection limits have been checked only based on numbers, we can now use information about the incoming peer to decide if we want it
- More powerful peer management: Dial attempts from other behaviours can be rejected early
- Incoming connections can be rejected early
- Banning can be returned exclusively to the peer management: We should not get connections to banned peers anymore making use of this
- TCP Nat updates: We might be able to take advantage of confirmed external addresses to check out tcp ports/ips
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Akihito Nakano <sora.akatsuki@gmail.com>
## Issue Addressed
Solves #4442
## Proposed Changes
EL clients log errors if we don't query this endpoint, but they are making releases that remove this error logging. After those are out we can stop calling it, after which point EL teams will remove the endpoint entirely.
Refer https://hackmd.io/@n0ble/deprecate-exchgTC
Often when testing I have to create a hack which is annoying to maintain.
I think it might be handy to add a custom compile-time flag that developers can use if they want to test things locally without having to backfill a bunch of blocks.
There is probably an argument to have a feature called "backfill" which is enabled by default and can be disabled. I didn't go this route because I think it's counter-intuitive to have a feature that enables a core and necessary behaviour.
## Issue Addressed
The PR fixes a bug where the the ideal rewards for source and head were incorrectly set.
Output from testing a validator that performed optimally in a Phase 0 epoch , note the `source` and `target` under ideal rewards is incorrect (compared to the actual `total_rewards` below):
```json
{
"ideal_rewards": [
...
{
"effective_balance": "32000000000",
"head": "18771",
"target": "18770",
"source": "18729",
"inclusion_delay": "17083",
"inactivity": "0"
}
],
"total_rewards": [
{
"validator_index": "0",
"head": "18729",
"target": "18770",
"source": "18771",
"inclusion_delay": "17083",
"inactivity": "0"
}
]
```
* changed name
* Fix sidecars
* Added query type and parrameter
* added query struct and function
* added method
* improved filtering method
* added blob_sidecar_list_indexed to block_id
* minor blobqueryindex fix
* function and formatting fix
* minor function and naming fix
* minor changes
## Issue Addressed
n/a Noticed this while working on something else
## Proposed Changes
- leverage the appropriate types to avoid a bunch of `unwrap` and errors
## Additional Info
n/a
## Issue Addressed
N/A
## Proposed Changes
Add lints for rust 1.71
[3789134](3789134ae2) is probably the one that needs most attention as it changes beacon state code. I changed the `is_in_inactivity_leak ` function to return a `ArithError` as not all consumers of that function work well with a `BeaconState::Error`.
## Issue Addressed
Fixes occasional compilation errors with mev-rs (see #4456).
## Proposed Changes
- Update `mev-rs` to the latest version, which allows us to remove hacky `[patch]` sections
- Update the `axum` version used in `watch` so LH only uses a single version
## Issue Addressed
Fix an issue observed by `@zlan` on Discord where Lighthouse would sometimes return this error when looking up states via the API:
> {"code":500,"message":"UNHANDLED_ERROR: ForkChoiceError(MissingProtoArrayBlock(0xc9cf1495421b6ef3215d82253b388d77321176a1dcef0db0e71a0cd0ffc8cdb7))","stacktraces":[]}
## Proposed Changes
The error stems from a faulty assumption in the HTTP API logic: that any state in the hot database must have its block in fork choice. This isn't true because the state's hot database may update much less frequently than the fork choice store, e.g. if reconstructing states (where freezer migration pauses), or if the freezer migration runs slowly. There could also be a race between loading the hot state and checking fork choice, e.g. even if the finalization migration of DB+fork choice were atomic, the update could happen between the 1st and 2nd calls.
To address this I've changed the HTTP API logic to use the finalized block's execution status as a fallback where it is safe to do so. In the case where a block is non-canonical and prior to finalization (permanently orphaned) we default `execution_optimistic` to `true`.
## Additional Info
I've also added a new CLI flag to reduce the frequency of the finalization migration as this is useful for several purposes:
- Spacing out database writes (less frequent, larger batches)
- Keeping a limited chain history with high availability, e.g. the last month in the hot database.
This new flag made it _substantially_ easier to test this change. It was extracted from `tree-states` (where it's called `--db-migration-period`), which is why this PR also carries the `tree-states` label.
## Issue Addressed
#4494
## Proposed Changes
- Remove explicit re-exports of various types to appease the new compiler lint
## Additional Info
It seems `warn(hidden_glob_reexports)` is the main culprit.
*Replaces #4434. It is identical, but this PR has a smaller diff due to a curated commit history.*
## Issue Addressed
NA
## Proposed Changes
This PR moves the scheduling logic for the `BeaconProcessor` into a new crate in `beacon_node/beacon_processor`. Previously it existed in the `beacon_node/network` crate.
This addresses a circular-dependency problem where it's not possible to use the `BeaconProcessor` from the `beacon_chain` crate. The `network` crate depends on the `beacon_chain` crate (`network -> beacon_chain`), but importing the `BeaconProcessor` into the `beacon_chain` crate would create a circular dependancy of `beacon_chain -> network`.
The `BeaconProcessor` was designed to provide queuing and prioritized scheduling for messages from the network. It has proven to be quite valuable and I believe we'd make Lighthouse more stable and effective by using it elsewhere. In particular, I think we should use the `BeaconProcessor` for:
1. HTTP API requests.
1. Scheduled tasks in the `BeaconChain` (e.g., state advance).
Using the `BeaconProcessor` for these tasks would help prevent the BN from becoming overwhelmed and would also help it to prioritize operations (e.g., choosing to process blocks from gossip before responding to low-priority HTTP API requests).
## Additional Info
This PR is intended to have zero impact on runtime behaviour. It aims to simply separate the *scheduling* code (i.e., the `BeaconProcessor`) from the *business logic* in the `network` crate (i.e., the `Worker` impls). Future PRs (see #4462) can build upon these works to actually use the `BeaconProcessor` for more operations.
I've gone to some effort to use `git mv` to make the diff look more like "file was moved and modified" rather than "file was deleted and a new one added". This should reduce review burden and help maintain commit attribution.
## Issue Addressed
[Users on Twitter](https://twitter.com/ashekhirin/status/1676334843192397824) are getting checkpoint sync URL timeouts with the default of 60s, so this PR increases the default timeout to 3 minutes.
I've also added a short section to the book about adjusting the timeout with `--checkpoint-sync-url-timeout`.
## Issue Addressed
#4331
## Proposed Changes
- Use comparison rather than strict equality between the earliest epoch we know about and the backfill target (which will be the most recent WSP by default or genesis)
- Add helper function `BackFillSync<T>::would_complete` to achieve this in one location
## Additional Info
- There's an ad hoc test for this in #4461
Co-authored-by: Age Manning <Age@AgeManning.com>
* changed name
* Fix sidecars
* update get blobs endpoint name from blobs to blob_sidecars
---------
Co-authored-by: Rahul Dogra <rahulcooldogra@gmail.com>
## Issue Addressed
#4118
## Proposed Changes
This PR introduces a "progressive balances" cache on the `BeaconState`, which keeps track of the accumulated target attestation balance for the current & previous epochs. The cached values are utilised by fork choice to calculate unrealized justification and finalization (instead of converting epoch participation arrays to balances for each block we receive).
This optimization will be rolled out gradually to allow for more testing. A new `--progressive-balances disabled|checked|strict|fast` flag is introduced to support this:
- `checked`: enabled with checks against participation cache, and falls back to the existing epoch processing calculation if there is a total target attester balance mismatch. There is no performance gain from this as the participation cache still needs to be computed. **This is the default mode for now.**
- `strict`: enabled with checks against participation cache, returns error if there is a mismatch. **Used for testing only**.
- `fast`: enabled with no comparative checks and without computing the participation cache. This mode gives us the performance gains from the optimization. This is still experimental and not currently recommended for production usage, but will become the default mode in a future release.
- `disabled`: disable the usage of progressive cache, and use the existing method for FFG progression calculation. This mode may be useful if we find a bug and want to stop the frequent error logs.
### Tasks
- [x] Initial cache implementation in `BeaconState`
- [x] Perform checks in fork choice to compare the progressive balances cache against results from `ParticipationCache`
- [x] Add CLI flag, and disable the optimization by default
- [x] Testing on Goerli & Benchmarking
- [x] Move caching logic from state processing to the `ProgressiveBalancesCache` (see [this comment](https://github.com/sigp/lighthouse/pull/4362#discussion_r1230877001))
- [x] Add attesting balance metrics
Co-authored-by: Jimmy Chen <jimmy@sigmaprime.io>
## Issue Addressed
[#4292](https://github.com/sigp/lighthouse/issues/4292)
## Proposed Changes
Updated the node health endpoint
will return a 200 status code if `!syncing && !el_offline && !optimistic`
wil return a 206 if `(syncing || optimistic) && !el_offline`
will return a 503 if `el_offline`
## Additional Info
## Issue Addressed
[#4259](https://github.com/sigp/lighthouse/issues/4259)
## Proposed Changes
debounce spammy `Unable to send message to the beacon processor` log messages
## Additional Info
We could potentially debounce other logs that have the potential to be "spammy".
After some feedback we decided to additionally add the following change:
create a newtype wrapper around `mpsc::Sender<BeaconWorkEvent<T>>`. When there is an error on the try_send method on the wrapper, we increase a counter metric with one label per work type.
* some blob reprocessing work
* remove ForceBlockLookup
* reorder enum match arms in sync manager
* a lot more reprocessing work
* impl logic for triggerng blob lookups along with block lookups
* deal with rpc blobs in groups per block in the da checker. don't cache missing blob ids in the da checker.
* make single block lookup generic
* more work
* add delayed processing logic and combine some requests
* start fixing some compile errors
* fix compilation in main block lookup mod
* much work
* get things compiling
* parent blob lookups
* fix compile
* revert red/stevie changes
* fix up sync manager delay message logic
* add peer usefulness enum
* should remove lookup refactor
* consolidate retry error handling
* improve peer scoring during certain failures in parent lookups
* improve retry code
* drop parent lookup if either req has a peer disconnect during download
* refactor single block processed method
* processing peer refactor
* smol bugfix
* fix some todos
* fix lints
* fix lints
* fix compile in lookup tests
* fix lints
* fix lints
* fix existing block lookup tests
* renamings
* fix after merge
* cargo fmt
* compilation fix in beacon chain tests
* fix
* refactor lookup tests to work with multiple forks and response types
* make tests into macros
* wrap availability check error
* fix compile after merge
* add random blobs
* start fixing up lookup verify error handling
* some bug fixes and the start of deneb only tests
* make tests work for all forks
* track information about peer source
* error refactoring
* improve peer scoring
* fix test compilation
* make sure blobs are sent for processing after stream termination, delete copied tests
* add some tests and fix a bug
* smol bugfixes and moar tests
* add tests and fix some things
* compile after merge
* lots of refactoring
* retry on invalid block/blob
* merge unknown parent messages before current slot lookup
* get tests compiling
* penalize blob peer on invalid blobs
* Check disk on in-memory cache miss
* Update beacon_node/beacon_chain/src/data_availability_checker/overflow_lru_cache.rs
* Update beacon_node/network/src/sync/network_context.rs
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
* fix bug in matching blocks and blobs in range sync
* pr feedback
* fix conflicts
* upgrade logs from warn to crit when we receive incorrect response in range
* synced_and_connected_within_tolerance -> should_search_for_block
* remove todo
* add data gas used and update excess data gas to u64
* Fix Broken Overflow Tests
* payload verification with commitments
* fix merge conflicts
* restore payload file
* Restore payload file
* remove todo
* add max blob commitments per block
* c-kzg lib update
* Fix ef tests
* Abstract over minimal/mainnet spec in kzg crate
* Start integrating new KZG
* checkpoint sync without alignment
* checkpoint sync without alignment
* add import
* add import
* query for checkpoint state by slot rather than state root (teku doesn't serve by state root)
* query for checkpoint state by slot rather than state root (teku doesn't serve by state root)
* loosen check
* get state first and query by most recent block root
* Revert "loosen check"
This reverts commit 069d13dd63aa794a3505db9f17bd1a6b73f0be81.
* get state first and query by most recent block root
* merge max blobs change
* simplify delay logic
* rename unknown parent sync message variants
* rename parameter, block_slot -> slot
* add some docs to the lookup module
* use interval instead of sleep
* drop request if blocks and blobs requests both return `None` for `Id`
* clean up `find_single_lookup` logic
* add lookup source enum
* clean up `find_single_lookup` logic
* add docs to find_single_lookup_request
* move LookupSource our of param where unnecessary
* remove unnecessary todo
* query for block by `state.latest_block_header.slot`
* fix lint
* fix merge transition ef tests
* fix test
* fix test
* fix observed blob sidecars test
* Add some metrics (#33)
* fix protocol limits for blobs by root
* Update Engine API for 1:1 Structure Method
* make beacon chain tests to fix devnet 6 changes
* get ckzg working and fix some tests
* fix remaining tests
* fix lints
* Fix KZG linking issues
* remove unused dep
* lockfile
* test fixes
* remove dbgs
* remove unwrap
* cleanup tx generator
* small fixes
* fixing fixes
* more self reivew
* more self review
* refactor genesis header initialization
* refactor mock el instantiations
* fix compile
* fix network test, make sure they run for each fork
* pr feedback
* fix last test (hopefully)
---------
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
- #4293
- #4264
## Proposed Changes
*Changes largely follow those suggested in the main issue*.
- Add new routes to HTTP API
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Add new routes to `BeaconNodeHttpClient`
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Define new Eth2 common types
- `BroadcastValidation`, enum representing the level of validation to apply to blocks prior to broadcast
- `BroadcastValidationQuery`, the corresponding HTTP query string type for the above type
- ~~Define `_checked` variants of both `publish_block` and `publish_blinded_block` that enforce a validation level at a type level~~
- Add interactive tests to the `bn_http_api_tests` test target covering each validation level (to their own test module, `broadcast_validation_tests`)
- `beacon/blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- Only consensus pass (i.e., equivocates) (200)
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- `beacon/blinded_blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- ~~Only consensus pass (i.e., equivocates) (200)~~
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- Add a new trait, `IntoGossipVerifiedBlock`, which allows type-level guarantees to be made as to gossip validity
- Modify the structure of the `ObservedBlockProducers` cache from a `(slot, validator_index)` mapping to a `((slot, validator_index), block_root)` mapping
- Modify `ObservedBlockProducers::proposer_has_been_observed` to return a `SeenBlock` rather than a boolean on success
- Punish gossip peer (low) for submitting equivocating blocks
- Rename `BlockError::SlashablePublish` to `BlockError::SlashableProposal`
## Additional Info
This PR contains changes that directly modify how blocks are verified within the client. For more context, consult [comments in-thread](https://github.com/sigp/lighthouse/pull/4316#discussion_r1234724202).
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Implements the `PrettyReqwestError` to wrap a `reqwest::Error` and give nicer `Debug` formatting. It also wraps the `Url` component in a `SensitiveUrl` to avoid leaking sensitive info in logs.
### Before
```
Reqwest(reqwest::Error { kind: Request, url: Url { scheme: "http", cannot_be_a_base: false, username: "", password: None, host: Some(Domain("localhost")), port: Some(9999), path: "/eth/v1/node/version", query: None, fragment: None }, source: hyper::Error(Connect, ConnectError("tcp connect error", Os { code: 61, kind: ConnectionRefused, message: "Connection refused" })) })
```
### After
```
HttpClient(url: http://localhost:9999/, kind: request, detail: error trying to connect: tcp connect error: Connection refused (os error 61))
```
## Additional Info
I've also renamed the `Reqwest` error enum variants to `HttpClient`, to give people a better chance at knowing what's going on. Reqwest is pretty odd and looks like a typo.
I've implemented it in the `eth2` and `execution_layer` crates. This should affect most logs in the VC and EE-related ones in the BN.
I think the last crate that could benefit from the is the `beacon_node/eth1` crate. I haven't updated it in this PR since its error type is not so amenable to it (everything goes into a `String`). I don't have a whole lot of time to jig around with that at the moment and I feel that this PR as it stands is a significant enough improvement to merge on its own. Leaving it as-is is fine for the time being and we can always come back for it later (or implement in-protocol deposits!).
## Issue Addressed
Resolves#3238
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Proposed Changes
Remove `max-skip-slots` checks when processing blocks.
This was legacy code which was previously used in the Medalla testnet to sync to the correct fork.
With the addition of checkpoint sync which allows us to sync to any arbitrary fork, this is no longer a necessary feature, so it has been removed for simplicity.
## Additional Notes
The CLI flag and checks for attestation processing have been retained as it still may have uses in DoS protection.
Currently, the ENR of the node may not be correctly updated when specifying ipv6 fields through the CLI if an ENR exists on disk.
This remedies a bug where we were not checking for ipv6 fields when comparing whether to use an on-disk ENR or updating based on CLI configuration parameters.
## Issue Addressed
Closes#4332
## Proposed Changes
Remove the `CountUnrealized` type, defaulting unrealized justification to _on_. This fixes the #4332 issue by ensuring that importing the same block to fork choice always results in the same outcome.
Finalized sync speed may be slightly impacted by this change, but that is deemed an acceptable trade-off until the optimisation from #4118 is implemented.
TODO:
- [x] Also check that the block isn't a duplicate before importing
* some blob reprocessing work
* remove ForceBlockLookup
* reorder enum match arms in sync manager
* a lot more reprocessing work
* impl logic for triggerng blob lookups along with block lookups
* deal with rpc blobs in groups per block in the da checker. don't cache missing blob ids in the da checker.
* make single block lookup generic
* more work
* add delayed processing logic and combine some requests
* start fixing some compile errors
* fix compilation in main block lookup mod
* much work
* get things compiling
* parent blob lookups
* fix compile
* revert red/stevie changes
* fix up sync manager delay message logic
* add peer usefulness enum
* should remove lookup refactor
* consolidate retry error handling
* improve peer scoring during certain failures in parent lookups
* improve retry code
* drop parent lookup if either req has a peer disconnect during download
* refactor single block processed method
* processing peer refactor
* smol bugfix
* fix some todos
* fix lints
* fix lints
* fix compile in lookup tests
* fix lints
* fix lints
* fix existing block lookup tests
* renamings
* fix after merge
* cargo fmt
* compilation fix in beacon chain tests
* fix
* refactor lookup tests to work with multiple forks and response types
* make tests into macros
* wrap availability check error
* fix compile after merge
* add random blobs
* start fixing up lookup verify error handling
* some bug fixes and the start of deneb only tests
* make tests work for all forks
* track information about peer source
* error refactoring
* improve peer scoring
* fix test compilation
* make sure blobs are sent for processing after stream termination, delete copied tests
* add some tests and fix a bug
* smol bugfixes and moar tests
* add tests and fix some things
* compile after merge
* lots of refactoring
* retry on invalid block/blob
* merge unknown parent messages before current slot lookup
* get tests compiling
* penalize blob peer on invalid blobs
* Check disk on in-memory cache miss
* Update beacon_node/beacon_chain/src/data_availability_checker/overflow_lru_cache.rs
* Update beacon_node/network/src/sync/network_context.rs
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
* fix bug in matching blocks and blobs in range sync
* pr feedback
* fix conflicts
* upgrade logs from warn to crit when we receive incorrect response in range
* synced_and_connected_within_tolerance -> should_search_for_block
* remove todo
* Fix Broken Overflow Tests
* fix merge conflicts
* checkpoint sync without alignment
* add import
* query for checkpoint state by slot rather than state root (teku doesn't serve by state root)
* get state first and query by most recent block root
* simplify delay logic
* rename unknown parent sync message variants
* rename parameter, block_slot -> slot
* add some docs to the lookup module
* use interval instead of sleep
* drop request if blocks and blobs requests both return `None` for `Id`
* clean up `find_single_lookup` logic
* add lookup source enum
* clean up `find_single_lookup` logic
* add docs to find_single_lookup_request
* move LookupSource our of param where unnecessary
* remove unnecessary todo
* query for block by `state.latest_block_header.slot`
* fix lint
* fix test
* fix test
* fix observed blob sidecars test
* PR updates
* use optional params instead of a closure
* create lookup and trigger request in separate method calls
* remove `LookupSource`
* make sure duplicate lookups are not dropped
---------
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
Resolves#3980. Builds on work by @GeemoCandama in #4084
## Proposed Changes
Extends the `SupportedProtocol` abstraction added in Geemo's PR and attempts to fix internal versioning of requests that are mentioned in this comment https://github.com/sigp/lighthouse/pull/4084#issuecomment-1496380033
Co-authored-by: geemo <geemo@tutanota.com>
Done in different PRs so that they can reviewed independently, as it's likely this won't be merged before I leave
Includes resolution for #4080
- [ ] #4299
- [ ] #4318
- [ ] #4320
Co-authored-by: Diva M <divma@protonmail.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
This PR addresses issue https://github.com/sigp/lighthouse/issues/4350
## Proposed Changes
This change will enable slasher broadcast in the following cases:
No flag is passed,
`--slasher-broadcast` is passed and,
`--slasher-broadcast=true` is passed.
Only when an explicit false value is passed the slasher does not broadcast.(`--slasher-broadcast=false`).
## Additional Info
TODO
- [x] Modify CLI parsing logic
- [x] Write test
Refer to #4353
Co-authored-by: Rahul Dogra <rahulcooldogra@gmail.com>
Co-authored-by: Gua00va <105484243+Gua00va@users.noreply.github.com>
## Issue Addressed
Closes#4354Closes#3987
Replaces #4305, #4283
## Proposed Changes
This switches the default slasher backend _back_ to LMDB.
If an MDBX database exists and the MDBX backend is enabled then MDBX will continue to be used. Our release binaries and Docker images will continue to include MDBX for as long as it is practical, so users of these should not notice any difference.
The main benefit is to users compiling from source and devs running tests. These users no longer have to struggle to compile MDBX and deal with the compatibility issues that arises. Similarly, devs don't need to worry about toggling feature flags in tests or risk forgetting to run the slasher tests due to backend issues.
## Issue Addressed
N/A
## Proposed Changes
This change will log the value of the relay block and the local block when the relay block is more profitable.
## Additional Info
This change will help validators understand the block selection (as it looks like the execution reward sometimes is higher that the MEV-reward).
The rationale for this change is to aid operators to better understand why a relay-block was chosen over a local block.
Looking at produced blocks (at beaconcha.in for example) it sometimes looks like the builder is making a profit just from the execution reward vs the MEV-reward, and creates the nagging question: "Could i have built this block and made that extra profit?"... The answer is probably "No, not without the extra transactions included by the relay", but by logging the value of the local block-candidate, this will no longer be an issue..
### Example (Mainnet)
https://beaconcha.in/block/17370329
MEV Block Reward: 0.17122 Ether to 0xE35bBaFa0266089f95d745d348b468622805D82B
Execution Reward: 0.17528 Ether to 0x1f9090aaE28b8a3dCeaDf281B0F12828e676c326
Difference: 0.00406 Ether
### Examples (Goerli)
https://goerli.beaconcha.in/block/9040065
MEV Block Reward: 0.56423 Ether to 0xF5794543CF6055Ae710E9c8E99E31343Cea004a8
Execution Reward: 0.56488 Ether to 0xfC0157aA4F5DB7177830ACddB3D5a9BB5BE9cc5e
Difference: 0.00065 Ether
https://goerli.beaconcha.in/block/9019921
MEV Block Reward: 1.39440 Ether to 0xF5794543CF6055Ae710E9c8E99E31343Cea004a8
Execution Reward: 1.39469 Ether to 0xfC0157aA4F5DB7177830ACddB3D5a9BB5BE9cc5e
Difference: 0.00029 Ether
https://goerli.beaconcha.in/block/9015583
MEV Block Reward: 1.04356 Ether to 0xF5794543CF6055Ae710E9c8E99E31343Cea004a8
Execution Reward: 1.04896 Ether to 0xfC0157aA4F5DB7177830ACddB3D5a9BB5BE9cc5e
Difference: 0.0054 Ether
## Issue Addressed
On deneb devnetv5, lighthouse keeps rate limiting peers which makes it harder to bootstrap new nodes as there are very few peers in the network. This PR adds an option to disable the inbound rate limiter for testnets.
Added an option to configure inbound rate limits as well.
Co-authored-by: Diva M <divma@protonmail.com>
## Proposed Changes
This is a light refactor of the execution layer's block hash calculation logic making it easier to use externally. e.g. in `eleel` (https://github.com/sigp/eleel/pull/18).
A static method is preferable to a method because the calculation doesn't actually need any data from `self`, and callers may want to compute block hashes without constructing an `ExecutionLayer` (`eleel` only constructs a simpler `Engine` struct).
This PR address the following spec change: https://github.com/ethereum/consensus-specs/pull/3312
Instead of subscribing to a long-lived subnet for every attached validator to a beacon node, all beacon nodes will subscribe to `SUBNETS_PER_NODE` long-lived subnets. This is currently set to 2 for mainnet.
This PR does not include any scoring or advanced discovery mechanisms. A future PR will improve discovery and we can implement scoring after the next hard fork when we expect all client teams and all implementations to respect this spec change.
This will be a significant change in the subnet network structure for consensus clients and we will likely have to monitor and tweak our peer management logic.
This PR adds the ability to read the Lighthouse logs from the HTTP API for both the BN and the VC.
This is done in such a way to as minimize any kind of performance hit by adding this feature.
The current design creates a tokio broadcast channel and mixes is into a form of slog drain that combines with our main global logger drain, only if the http api is enabled.
The drain gets the logs, checks the log level and drops them if they are below INFO. If they are INFO or higher, it sends them via a broadcast channel only if there are users subscribed to the HTTP API channel. If not, it drops the logs.
If there are more than one subscriber, the channel clones the log records and converts them to json in their independent HTTP API tasks.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Adds metrics to track validators that are submitting equivocating (but not slashable) sync messages. This follows on from some research we've been doing in a separate fork of LH.
## Additional Info
@jimmygchen and @michaelsproul have already run their eyes over this so it should be easy to get into v4.2.0, IMO.
## Issue Addressed
#4281
## Proposed Changes
- Change `ShufflingCache` implementation from using `LruCache` to a custom cache that removes entry with lowest epoch instead of oldest insertion time.
- Protect the "enshrined" head shufflings when inserting new committee cache entries. The shuffling ids matching the head's previous, current, and future epochs will never be ejected from the cache during `Self::insert_cache_item`.
## Additional Info
There is a bonus point on shuffling preferences in the issue description that hasn't been implemented yet, as I haven't figured out a good way to do this:
> However I'm not convinced since there are some complexities around tie-breaking when two entries have the same epoch. Perhaps preferring entries in the canonical chain is best?
We should be able to check if a block is on the canonical chain by:
```rust
canonical_head
.fork_choice_read_lock()
.contains_block(root)
```
However we need to interleave the shuffling and fork choice locks, which may cause deadlocks if we're not careful (mentioned by @paulhauner). Alternatively, we could use the `state.block_roots` field of the `chain.canonical_head.snapshot.beacon_state`, which avoids deadlock but requires more work.
I'd like to get some feedback on review & testing before I dig deeper into the preferences stuff, as having the canonical head preference may already be quite useful in preventing the issue raised.
Co-authored-by: Jimmy Chen <jimmy@sigmaprime.io>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/4291, part of #3613.
## Proposed Changes
- Implement the `el_offline` field on `/eth/v1/node/syncing`. We set `el_offline=true` if:
- The EL's internal status is `Offline` or `AuthFailed`, _or_
- The most recent call to `newPayload` resulted in an error (more on this in a moment).
- Use the `el_offline` field in the VC to mark nodes with offline ELs as _unsynced_. These nodes will still be used, but only after synced nodes.
- Overhaul the usage of `RequireSynced` so that `::No` is used almost everywhere. The `--allow-unsynced` flag was broken and had the opposite effect to intended, so it has been deprecated.
- Add tests for the EL being offline on the upcheck call, and being offline due to the newPayload check.
## Why track `newPayload` errors?
Tracking the EL's online/offline status is too coarse-grained to be useful in practice, because:
- If the EL is timing out to some calls, it's unlikely to timeout on the `upcheck` call, which is _just_ `eth_syncing`. Every failed call is followed by an upcheck [here](693886b941/beacon_node/execution_layer/src/engines.rs (L372-L380)), which would have the effect of masking the failure and keeping the status _online_.
- The `newPayload` call is the most likely to time out. It's the call in which ELs tend to do most of their work (often 1-2 seconds), with `forkchoiceUpdated` usually returning much faster (<50ms).
- If `newPayload` is failing consistently (e.g. timing out) then this is a good indication that either the node's EL is in trouble, or the network as a whole is. In the first case validator clients _should_ prefer other BNs if they have one available. In the second case, all of their BNs will likely report `el_offline` and they'll just have to proceed with trying to use them.
## Additional Changes
- Add utility method `ForkName::latest` which is quite convenient for test writing, but probably other things too.
- Delete some stale comments from when we used to support multiple execution nodes.
## Issue Addressed
#2335
## Proposed Changes
- Remove the `lighthouse-network::tests::gossipsub_tests` module
- Remove dead code from the `lighthouse-network::tests::common` helper module (`build_full_mesh`)
## Additional Info
After discussion with both @divagant-martian and @AgeManning, these tests seem to have two main issues in that they are:
- Redundant, in that they don't test anything meaningful (due to our handling of duplicate messages)
- Out-of-place, in that it doesn't really test Lighthouse-specific functionality (rather libp2p functionality)
As such, this PR supersedes #4286.
## Issue Addressed
NA
## Proposed Changes
Adds an additional check to a feature introduced in #4179 to prevent us from re-queuing already-known blocks that could be rejected immediately.
## Additional Info
Ideally this would have been included in v4.1.0, however we came across it too late to release it safely. We decided that the safest path forward is to release *without* this check and then patch it in the next version. The lack of this check should only result in a very minor performance impact (the impact is totally negligible in my assessment).
## Issue Addressed
NA
## Proposed Changes
Adds a flag to store invalid blocks on disk for teh debugz. Only *some* invalid blocks are stored, those which:
- Were received via gossip (rather than RPC, for instance)
- This keeps things simple to start with and should capture most blocks.
- Passed gossip verification
- This reduces the ability for random people to fill up our disk. A proposer signature is required to write something to disk.
## Additional Info
It's possible that we'll store blocks that aren't necessarily invalid, but we had an internal error during verification. Those blocks seem like they might be useful sometimes.
## Issue Addressed
N/A
## Proposed Changes
Replace ganache-cli with anvil https://github.com/foundry-rs/foundry/blob/master/anvil/README.md
We can lose all js dependencies in CI as a consequence.
## Additional info
Also changes the ethers-rs version used in the execution layer (for the transaction reconstruction) to a newer one. This was necessary to get use the ethers utils for anvil. The fixed execution engine integration tests should catch any potential issues with the payload reconstruction after #3592
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
#4233
## Proposed Changes
Remove the `best_justified_checkpoint` from the `PersistedForkChoiceStore` type as it is now unused.
Additionally, remove the `Option`'s wrapping the `justified_checkpoint` and `finalized_checkpoint` fields on `ProtoNode` which were only present to facilitate a previous migration.
Include the necessary code to facilitate the migration to a new DB schema.
## Issue Addressed
Addresses #4238
## Proposed Changes
- [x] Add tests for the scenarios
- [x] Use the fork of the attestation slot for signature verification.
## Issue Addressed
Addresses #4234
## Proposed Changes
- Skip withdrawals processing in an inconsistent state replay.
- Repurpose `StateRootStrategy`: rename to `StateProcessingStrategy` and always skip withdrawals if using `StateProcessingStrategy::Inconsistent`
- Add a test to reproduce the scenario
Co-authored-by: Jimmy Chen <jimmy@sigmaprime.io>
## Issue Addressed
#4266
## Proposed Changes
- Log `Using external block builder` instead of `Connected to external block builder` on its initialization to resolve the confusion (there's no actual connection there)
## Additional Info
The log is mentioned in builders docs, so it's changed there too.
This commit adds a check to the networking service when handling core gossipsub topic subscription requests. If the BN is already subscribed to the core topics, we won't attempt to resubscribe.
## Issue Addressed
#4258
## Proposed Changes
- In the networking service, check if we're already subscribed to all of the core gossipsub topics and, if so, do nothing
## Additional Info
N/A
## Limit Backfill Sync
This PR transitions Lighthouse from syncing all the way back to genesis to only syncing back to the weak subjectivity point (~ 5 months) when syncing via a checkpoint sync.
There are a number of important points to note with this PR:
- Firstly and most importantly, this PR fundamentally shifts the default security guarantees of checkpoint syncing in Lighthouse. Prior to this PR, Lighthouse could verify the checkpoint of any given chain by ensuring the chain eventually terminates at the corresponding genesis. This guarantee can still be employed via the new CLI flag --genesis-backfill which will prompt lighthouse to the old behaviour of downloading all blocks back to genesis. The new behaviour only checks the proposer signatures for the last 5 months of blocks but cannot guarantee the chain matches the genesis chain.
- I have not modified any of the peer scoring or RPC responses. Clients syncing from gensis, will downscore new Lighthouse peers that do not possess blocks prior to the WSP. This is by design, as Lighthouse nodes of this form, need a mechanism to sort through peers in order to find useful peers in order to complete their genesis sync. We therefore do not discriminate between empty/error responses for blocks prior or post the local WSP. If we request a block that a peer does not posses, then fundamentally that peer is less useful to us than other peers.
- This will make a radical shift in that the majority of nodes will no longer store the full history of the chain. In the future we could add a pruning mechanism to remove old blocks from the db also.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#3873
## Proposed Changes
add a cache to optimise historical state lookup.
## Additional Info
N/A
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
This PR un-deprecates some commonly used test util functions, e.g. `extend_chain`. Most of these were deprecated in 2020 but some of us still found them quite convenient and they're still being used a lot. If there's no issue with using them, I think we should remove the "Deprecated" comment to avoid confusion.
## Issue Addressed
#4150
## Proposed Changes
Maintain trusted peers in the pruning logic. ~~In principle the changes here are not necessary as a trusted peer has a max score (100) and all other peers can have at most 0 (because we don't implement positive scores). This means that we should never prune trusted peers unless we have more trusted peers than the target peer count.~~
This change shifts this logic to explicitly never prune trusted peers which I expect is the intuitive behaviour.
~~I suspect the issue in #4150 arises when a trusted peer disconnects from us for one reason or another and then we remove that peer from our peerdb as it becomes stale. When it re-connects at some large time later, it is no longer a trusted peer.~~
Currently we do disconnect trusted peers, and this PR corrects this to maintain trusted peers in the pruning logic.
As suggested in #4150 we maintain trusted peers in the db and thus we remember them even if they disconnect from us.
* Update Engine API to Latest
* Get Mock EE Working
* Fix Mock EE
* Update Engine API Again
* Rip out get_blobs_bundle Stuff
* Fix Test Harness
* Fix Clippy Complaints
* Fix Beacon Chain Tests
It is a well-known fact that IP addresses for beacon nodes used by specific validators can be de-anonymized. There is an assumed risk that a malicious user may attempt to DOS validators when producing blocks to prevent chain growth/liveness.
Although there are a number of ideas put forward to address this, there a few simple approaches we can take to mitigate this risk.
Currently, a Lighthouse user is able to set a number of beacon-nodes that their validator client can connect to. If one beacon node is taken offline, it can fallback to another. Different beacon nodes can use VPNs or rotate IPs in order to mask their IPs.
This PR provides an additional setup option which further mitigates attacks of this kind.
This PR introduces a CLI flag --proposer-only to the beacon node. Setting this flag will configure the beacon node to run with minimal peers and crucially will not subscribe to subnets or sync committees. Therefore nodes of this kind should not be identified as nodes connected to validators of any kind.
It also introduces a CLI flag --proposer-nodes to the validator client. Users can then provide a number of beacon nodes (which may or may not run the --proposer-only flag) that the Validator client will use for block production and propagation only. If these nodes fail, the validator client will fallback to the default list of beacon nodes.
Users are then able to set up a number of beacon nodes dedicated to block proposals (which are unlikely to be identified as validator nodes) and point their validator clients to produce blocks on these nodes and attest on other beacon nodes. An attack attempting to prevent liveness on the eth2 network would then need to preemptively find and attack the proposer nodes which is significantly more difficult than the default setup.
This is a follow on from: #3328
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
