## Issue Addressed
NA
## Proposed Changes
After some discussion in Discord with @mkalinin it was raised that it was not the intention of the engine API to have CLs validate the `latest_valid_hash` (LVH) and all ancestors.
Whilst I believe the engine API is being updated such that the LVH *must* identify a valid hash or be set to some junk value, I'm not confident that we can rely upon the LVH as being valid (at least for now) due to the confusion surrounding it.
Being able to validate blocks via the LVH is a relatively minor optimisation; if the LVH value ends up becoming our head we'll send an fcU and get the VALID status there.
Falsely marking a block as valid has serious consequences and since it's a minor optimisation to use LVH I think that we don't take the risk.
For clarity, we will still *invalidate* the *descendants* of the LVH, we just wont *validate* the *ancestors*.
## Additional Info
NA
## Issue Addressed
Resolves#3176
## Proposed Changes
Continues from PRs by @divagant-martian to gradually remove EL redundancy (see #3284, #3257).
This PR achieves:
- Removes the `broadcast` and `first_success` methods. The functional impact is that every request to the EE will always be tried immediately, regardless of the cached `EngineState` (this resolves#3176). Previously we would check the engine state before issuing requests, this doesn't make sense in a single-EE world; there's only one EE so we might as well try it for every request.
- Runs the upcheck/watchdog routine once per slot rather than thrice. When we had multiple EEs frequent polling was useful to try and detect when the primary EE had come back online and we could switch to it. That's not as relevant now.
- Always creates logs in the `Engines::upcheck` function. Previously we would mute some logs since they could get really noisy when one EE was down but others were functioning fine. Now we only have one EE and are upcheck-ing it less, it makes sense to always produce logs.
This PR purposefully does not achieve:
- Updating all occurances of "engines" to "engine". I'm trying to keep the diff small and manageable. We can come back for this.
## Additional Info
NA
## Issue Addressed
Follow up to https://github.com/sigp/lighthouse/pull/3290 that fixes a caching bug
## Proposed Changes
Build the committee cache for the new `POST /lighthouse/analysis/block_rewards` API. Due to an unusual quirk of the total active balance cache the API endpoint would sometimes fail after loading a state from disk which had a current epoch cache _but not_ a total active balance cache. This PR adds calls to build the caches immediately before they're required, and has been running smoothly with `blockdreamer` the last few days.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3270
## Proposed Changes
Optimize the calculation of historic beacon committees in the HTTP API.
This is achieved by allowing committee caches to be constructed for historic epochs, and constructing these committee caches on the fly in the API. This is much faster than reconstructing the state at the requested epoch, which usually takes upwards of 20s, and sometimes minutes with SPRP=8192. The depth of the `randao_mixes` array allows us to look back 64K epochs/0.8 years from a single state, which is pretty awesome!
We always use the `state_id` provided by the caller, but will return a nice 400 error if the epoch requested is out of range for the state requested, e.g.
```bash
# Prater
curl "http://localhost:5052/eth/v1/beacon/states/3170304/committees?epoch=33538"
```
```json
{"code":400,"message":"BAD_REQUEST: epoch out of bounds, try state at slot 1081344","stacktraces":[]}
```
Queries will be fastest when aligned to `slot % SPRP == 0`, so the hint suggests a slot that is 0 mod 8192.
## Overview
This rather extensive PR achieves two primary goals:
1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state.
2. Refactors fork choice, block production and block processing to `async` functions.
Additionally, it achieves:
- Concurrent forkchoice updates to the EL and cache pruning after a new head is selected.
- Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production.
- Concurrent per-block-processing and execution payload verification during block processing.
- The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?):
- I had to do this to deal with sending blocks into spawned tasks.
- Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones.
- We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap.
- Avoids cloning *all the blocks* in *every chain segment* during sync.
- It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough 😅)
- The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs.
For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273
## Changes to `canonical_head` and `fork_choice`
Previously, the `BeaconChain` had two separate fields:
```
canonical_head: RwLock<Snapshot>,
fork_choice: RwLock<BeaconForkChoice>
```
Now, we have grouped these values under a single struct:
```
canonical_head: CanonicalHead {
cached_head: RwLock<Arc<Snapshot>>,
fork_choice: RwLock<BeaconForkChoice>
}
```
Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously.
## Breaking Changes
### The `state` (root) field in the `finalized_checkpoint` SSE event
Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event:
1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`.
4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots.
Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](de2b2801c8/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java (L171-L182)) it uses [`getStateRootFromBlockRoot`](de2b2801c8/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java (L336-L341)) which uses (1).
I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku.
## Notes for Reviewers
I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct.
I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking".
I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it.
I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around.
Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2.
You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests:
- Changing tests to be `tokio::async` tests.
- Adding `.await` to fork choice, block processing and block production functions.
- Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`.
- Wrapping `SignedBeaconBlock` in an `Arc`.
- In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant.
I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic.
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
This PR is a subset of the changes in #3134. Unstable will still not function correctly with the new builder spec once this is merged, #3134 should be used on testnets
## Proposed Changes
- Removes redundancy in "builders" (servers implementing the builder spec)
- Renames `payload-builder` flag to `builder`
- Moves from old builder RPC API to new HTTP API, but does not implement the validator registration API (implemented in https://github.com/sigp/lighthouse/pull/3194)
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Lays the groundwork for builder API changes by implementing the beacon-API's new `register_validator` endpoint
## Proposed Changes
- Add a routine in the VC that runs on startup (re-try until success), once per epoch or whenever `suggested_fee_recipient` is updated, signing `ValidatorRegistrationData` and sending it to the BN.
- TODO: `gas_limit` config options https://github.com/ethereum/builder-specs/issues/17
- BN only sends VC registration data to builders on demand, but VC registration data *does update* the BN's prepare proposer cache and send an updated fcU to a local EE. This is necessary for fee recipient consistency between the blinded and full block flow in the event of fallback. Having the BN only send registration data to builders on demand gives feedback directly to the VC about relay status. Also, since the BN has no ability to sign these messages anyways (so couldn't refresh them if it wanted), and validator registration is independent of the BN head, I think this approach makes sense.
- Adds upcoming consensus spec changes for this PR https://github.com/ethereum/consensus-specs/pull/2884
- I initially applied the bit mask based on a configured application domain.. but I ended up just hard coding it here instead because that's how it's spec'd in the builder repo.
- Should application mask appear in the api?
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Resolves#3069
## Proposed Changes
Unify the `eth1-endpoints` and `execution-endpoints` flags in a backwards compatible way as described in https://github.com/sigp/lighthouse/issues/3069#issuecomment-1134219221
Users have 2 options:
1. Use multiple non auth execution endpoints for deposit processing pre-merge
2. Use a single jwt authenticated execution endpoint for both execution layer and deposit processing post merge
Related https://github.com/sigp/lighthouse/issues/3118
To enable jwt authenticated deposit processing, this PR removes the calls to `net_version` as the `net` namespace is not exposed in the auth server in execution clients.
Moving away from using `networkId` is a good step in my opinion as it doesn't provide us with any added guarantees over `chainId`. See https://github.com/ethereum/consensus-specs/issues/2163 and https://github.com/sigp/lighthouse/issues/2115
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Add a new HTTP endpoint `POST /lighthouse/analysis/block_rewards` which takes a vec of `BeaconBlock`s as input and outputs the `BlockReward`s for them.
Augment the `BlockReward` struct with the attestation data for attestations in the block, which simplifies access to this information from blockprint. Using attestation data I've been able to make blockprint up to 95% accurate across Prysm/Lighthouse/Teku/Nimbus. I hope to go even higher using a bunch of synthetic blocks produced for Prysm/Nimbus/Lodestar, which are underrepresented in the current training data.
## Issue Addressed
Fixes#1864 and a bunch of other closed but unresolved issues.
## Proposed Changes
Allows the deposit caching to recover from `NonConsecutive` deposit errors by resetting the last processed block to the last valid deposit's block number. Still not sure of the underlying cause of this error, but this should recover the cache so we don't need `--eth1-purge-cache` anymore 🎉
A huge thanks to @one-three-three-seven for reproducing the error and providing the data that helped testing out the fix 🙌
Still needs a few more tests.
## Proposed Changes
Expand the set of paths tracked by the HTTP API metrics to include all paths hit by the validator client.
These paths were only partially updated for Altair, so we were missing some of the sync committee and v2 APIs.
## Issue Addressed
NA
## Proposed Changes
I used these logs when debugging a spurious failure with Infura and thought they might be nice to have around permanently.
There's no changes to functionality in this PR, just some additional `debug!` logs.
## Additional Info
NA
## Issue Addressed
Deprecates the step parameter in the blocks by range request
## Proposed Changes
- Modifies the BlocksByRangeRequest type to remove the step parameter and everywhere we took it into account before
- Adds a new type to still handle coding and decoding of requests that use the parameter
## Additional Info
I went with a deprecation over the type itself so that requests received outside `lighthouse_network` don't even need to deal with this parameter. After the deprecation period just removing the Old blocks by range request should be straightforward
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2944
## Proposed Changes
Remove snapshots from the cache during sync rather than cloning them. This reduces unnecessary cloning and memory fragmentation during sync.
## Additional Info
This PR relies on the fact that the `block_delay` cache is not populated for blocks from sync. Relying on block delay may have the side effect that a change in `block_delay` calculation could lead to: a) more clones, if block delays are added for syncing blocks or b) less clones, if blocks near the head are erroneously provided without a `block_delay`. Case (a) would be a regression to the current status quo, and (b) is low-risk given we know that the snapshot cache is current susceptible to misses (hence `tree-states`).
## Issue Addressed
#2820
## Proposed Changes
The problem is that validator_monitor_prev_epoch metrics are updated only if there is EpochSummary present in summaries map for the previous epoch and it is not the case for the offline validator. Ensure that EpochSummary is inserted into summaries map also for the offline validators.
## Issue Addressed
Partly resolves https://github.com/sigp/lighthouse/issues/3032
## Proposed Changes
Extracts some of the functionality of #3094 into a separate PR as the original PR requires a bit more work.
Do not unnecessarily penalize peers when we fail to validate received execution payloads because our execution layer is offline.
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
NA
## Proposed Changes
- Uses a `Vec` in `SingleEpochParticipationCache` rather than `HashMap` to speed up processing times at the cost of memory usage.
- Cache the result of `integer_sqrt` rather than recomputing for each validator.
- Cache `state.previous_epoch` rather than recomputing it for each validator.
### Benchmarks
Benchmarks on a recent mainnet state using #3252 to get timing.
#### Without this PR
```
lcli skip-slots --state-path /tmp/state-0x3cdc.ssz --partial-state-advance --slots 32 --state-root 0x3cdc33cd02713d8d6cc33a6dbe2d3a5bf9af1d357de0d175a403496486ff845e --runs 10
[2022-06-09T08:21:02Z INFO lcli::skip_slots] Using mainnet spec
[2022-06-09T08:21:02Z INFO lcli::skip_slots] Advancing 32 slots
[2022-06-09T08:21:02Z INFO lcli::skip_slots] Doing 10 runs
[2022-06-09T08:21:02Z INFO lcli::skip_slots] State path: "/tmp/state-0x3cdc.ssz"
SSZ decoding /tmp/state-0x3cdc.ssz: 43ms
[2022-06-09T08:21:03Z INFO lcli::skip_slots] Run 0: 245.718794ms
[2022-06-09T08:21:03Z INFO lcli::skip_slots] Run 1: 245.364782ms
[2022-06-09T08:21:03Z INFO lcli::skip_slots] Run 2: 255.866179ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 3: 243.838909ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 4: 250.431425ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 5: 248.68765ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 6: 262.051113ms
[2022-06-09T08:21:05Z INFO lcli::skip_slots] Run 7: 264.293967ms
[2022-06-09T08:21:05Z INFO lcli::skip_slots] Run 8: 293.202007ms
[2022-06-09T08:21:05Z INFO lcli::skip_slots] Run 9: 264.552017ms
```
#### With this PR:
```
lcli skip-slots --state-path /tmp/state-0x3cdc.ssz --partial-state-advance --slots 32 --state-root 0x3cdc33cd02713d8d6cc33a6dbe2d3a5bf9af1d357de0d175a403496486ff845e --runs 10
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 0: 73.898678ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 1: 75.536978ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 2: 75.176104ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 3: 76.460828ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 4: 75.904195ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 5: 75.53077ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 6: 74.745572ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 7: 75.823489ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 8: 74.892055ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 9: 76.333569ms
```
## Additional Info
NA
## Issue Addressed
currently we count a failed attempt for a syncing chain even if the peer is not at fault. This makes us do more work if the chain fails, and heavily penalize peers, when we can simply retry. Inspired by a proposal I made to #3094
## Proposed Changes
If a batch fails but the peer is not at fault, do not count the attempt
Also removes some annoying logs
## Additional Info
We still get a counter on ignored attempts.. just in case
## Issue Addressed
na
## Proposed Changes
Updates libp2p to https://github.com/libp2p/rust-libp2p/pull/2662
## Additional Info
From comments on the relevant PRs listed, we should pay attention at peer management consistency, but I don't think anything weird will happen.
This is running in prater tok and sin
## Issue Addressed
Fixes a timing issue that results in spurious fork choice notifier failures:
```
WARN Error signalling fork choice waiter slot: 3962270, error: ForkChoiceSignalOutOfOrder { current: Slot(3962271), latest: Slot(3962270) }, service: beacon
```
There’s a fork choice run that is scheduled to run at the start of every slot by the `timer`, which creates a 12s interval timer when the beacon node starts up. The problem is that if there’s a bit of clock drift that gets corrected via NTP (or a leap second for that matter) then these 12s intervals will cease to line up with the start of the slot. This then creates the mismatch in slot number that we see above.
Lighthouse also runs fork choice 500ms before the slot begins, and these runs are what is conflicting with the start-of-slot runs. This means that the warning in current versions of Lighthouse is mostly cosmetic because fork choice is up to date with all but the most recent 500ms of attestations (which usually isn’t many).
## Proposed Changes
Fix the per-slot timer so that it continually re-calculates the duration to the start of the next slot and waits for that.
A side-effect of this change is that we may skip slots if the per-slot task takes >12s to run, but I think this is an unlikely scenario and an acceptable compromise.
## Issue Addressed
Reduces the effect of late blocks on overall node buildup
## Proposed Changes
change the capacity of the channels used to send work for reprocessing in the beacon processor, and to send back to the main processor task, to be 75% of the capacity of the channel for receiving new events
## Additional Info
The issues we've seen suggest we should still evaluate node performance under stress, with late blocks being a big factor.
Other changes that could help:
1. right now we have a cap for queued attestations for reprocessing that applies to the sum of aggregated and unaggregated attestations. We could consider adding a separate cap that favors aggregated ones.
2. solving #2848
## Issue Addressed
Fix for the eth1 cache sync issue observed on Ropsten.
## Proposed Changes
Ropsten blocks are so infrequent that they broke our algorithm for downloading eth1 blocks. We currently try to download forwards from the last block in our cache to the block with block number [`remote_highest_block - FOLLOW_DISTANCE + FOLLOW_DISTANCE / ETH1_BLOCK_TIME_TOLERANCE_FACTOR`](6f732986f1/beacon_node/eth1/src/service.rs (L489-L492)). With the tolerance set to 4 this is insufficient because we lag by 1536 blocks, which is more like ~14 hours on Ropsten. This results in us having an incomplete eth1 cache, because we should cache all blocks between -16h and -8h. Even if we were to set the tolerance to 2 for the largest allowance, we would only look back 1024 blocks which is still more than 8 hours.
For example consider this block https://ropsten.etherscan.io/block/12321390. The block from 1536 blocks earlier is 14 hours and 20 minutes before it: https://ropsten.etherscan.io/block/12319854. The block from 1024 blocks earlier is https://ropsten.etherscan.io/block/12320366, 8 hours and 48 minutes before.
- This PR introduces a new CLI flag called `--eth1-cache-follow-distance` which can be used to set the distance manually.
- A new dynamic catchup mechanism is added which detects when the cache is lagging the true eth1 chain and tries to download more blocks within the follow distance in order to catch up.
## Issue Addressed
#3156
## Proposed Changes
Emit a `WARN` log whenever the value of `fee_recipient` as returned from the EE is different from the value of `suggested_fee_recipient` as set on the BN, for example by the `--suggested-fee-recipient` CLI flag.
## Additional Info
I have set the log level to `WARN` since it is legal behaviour (meaning it isn't really an error but is important to know when it is occurring).
If we feel like this behaviour is almost always undesired (caused by a misconfiguration or malicious EE) then an `ERRO` log would be more appropriate. Happy to change it in that case.
## Issue Addressed
We were logging `out_finalized_epoch` instead of `our_finalized_epoch`. I noticed this ages ago but only just got around to fixing it.
## Additional Info
I also reformatted the log line to respect the line length limit (`rustfmt` won't do it because it gets confused by the `;` in slog's log macros).
## Issue Addressed
NA
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
- Pending testing on our infra. **Please do not merge**
## Issue Addressed
#3212
## Proposed Changes
Move chain segments coming from back-fill syncing from highest priority to lowest
## Additional Info
If this does not solve the issue, next steps would be lowering the batch size for back-fill sync, and as last resort throttling the processing of these chain segments
## Issue Addressed
Fixes an issue that @paulhauner found with the v2.3.0 release candidate whereby the fork choice runs introduced by #3168 tripped over each other during sync:
```
May 24 23:06:40.542 WARN Error signalling fork choice waiter slot: 3884129, error: ForkChoiceSignalOutOfOrder { current: Slot(3884131), latest: Slot(3884129) }, service: beacon
```
This can occur because fork choice is called from the state advance _and_ the per-slot task. When one of these runs takes a long time it can end up finishing after a run from a later slot, tripping the error above. The problem is resolved by not running either of these fork choice calls during sync.
Additionally, these parallel fork choice runs were causing issues in the database:
```
May 24 07:49:05.098 WARN Found a chain that should already have been pruned, head_slot: 92925, head_block_root: 0xa76c7bf1b98e54ed4b0d8686efcfdf853484e6c2a4c67e91cbf19e5ad1f96b17, service: beacon
May 24 07:49:05.101 WARN Database migration failed error: HotColdDBError(FreezeSlotError { current_split_slot: Slot(92608), proposed_split_slot: Slot(92576) }), service: beacon
```
In this case, two fork choice calls triggering the finalization processing were being processed out of order due to differences in their processing time, causing the background migrator to try to advance finalization _backwards_ 😳. Removing the parallel fork choice runs from sync effectively addresses the issue, because these runs are most likely to have different finalized checkpoints (because of the speed at which fork choice advances during sync). In theory it's still possible to process updates out of order if any other fork choice runs end up completing out of order, but this should be much less common. Fixing out of order fork choice runs in general is difficult as it requires architectural changes like serialising fork choice updates through a single thread, or locking fork choice along with the head when it is mutated (https://github.com/sigp/lighthouse/pull/3175).
## Proposed Changes
* Don't run per-slot fork choice during sync (if head is older than 4 slots)
* Don't run state-advance fork choice during sync (if head is older than 4 slots)
* Check for monotonic finalization updates in the background migrator. This is a good defensive check to have, and I'm not sure why we didn't have it before (we may have had it and wrongly removed it).
*This PR was adapted from @pawanjay176's work in #3197.*
## Issue Addressed
Fixes a regression in https://github.com/sigp/lighthouse/pull/3168
## Proposed Changes
https://github.com/sigp/lighthouse/pull/3168 added calls to `fork_choice` in `BeaconChain::per_slot_task` function. This leads to a panic as `per_slot_task` is called from an async context which calls fork choice, which then calls `block_on`.
This PR changes the timer to call the `per_slot_task` function in a blocking thread.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
## Issue Addressed
This fixes the low-hanging Clippy lints introduced in Rust 1.61 (due any hour now). It _ignores_ one lint, because fixing it requires a structural refactor of the validator client that needs to be done delicately. I've started on that refactor and will create another PR that can be reviewed in more depth in the coming days. I think we should merge this PR in the meantime to unblock CI.
## Issue Addressed
Upcoming spec change https://github.com/ethereum/consensus-specs/pull/2878
## Proposed Changes
1. Run fork choice at the start of every slot, and wait for this run to complete before proposing a block.
2. As an optimisation, also run fork choice 3/4 of the way through the slot (at 9s), _dequeueing attestations for the next slot_.
3. Remove the fork choice run from the state advance timer that occurred before advancing the state.
## Additional Info
### Block Proposal Accuracy
This change makes us more likely to propose on top of the correct head in the presence of re-orgs with proposer boost in play. The main scenario that this change is designed to address is described in the linked spec issue.
### Attestation Accuracy
This change _also_ makes us more likely to attest to the correct head. Currently in the case of a skipped slot at `slot` we only run fork choice 9s into `slot - 1`. This means the attestations from `slot - 1` aren't taken into consideration, and any boost applied to the block from `slot - 1` is not removed (it should be). In the language of the linked spec issue, this means we are liable to attest to C, even when the majority voting weight has already caused a re-org to B.
### Why remove the call before the state advance?
If we've run fork choice at the start of the slot then it has already dequeued all the attestations from the previous slot, which are the only ones eligible to influence the head in the current slot. Running fork choice again is unnecessary (unless we run it for the next slot and try to pre-empt a re-org, but I don't currently think this is a great idea).
### Performance
Based on Prater testing this adds about 5-25ms of runtime to block proposal times, which are 500-1000ms on average (and spike to 5s+ sometimes due to state handling issues 😢 ). I believe this is a small enough penalty to enable it by default, with the option to disable it via the new flag `--fork-choice-before-proposal-timeout 0`. Upcoming work on block packing and state representation will also reduce block production times in general, while removing the spikes.
### Implementation
Fork choice gets invoked at the start of the slot via the `per_slot_task` function called from the slot timer. It then uses a condition variable to signal to block production that fork choice has been updated. This is a bit funky, but it seems to work. One downside of the timer-based approach is that it doesn't happen automatically in most of the tests. The test added by this PR has to trigger the run manually.
## Issue Addressed
@z3n-chada is currently getting a `PayloadIdUnavailable` error when connecting lighthouse to Erigon and it's difficult to discern why so this just logs out the response status from the EE when we hit an `PayloadIdUnavailable` error
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Remove support for DB migrations that support upgrading from schema's below version 5. This is mostly for cosmetic/code quality reasons as in most circumstances upgrading from versions of Lighthouse this old will almost always require a re-sync.
## Additional Info
The minimum supported database schema is now version 5.
## Issue Addressed
N/A
## Proposed Changes
Prevents the early attester cache from producing attestations to future blocks. This bug could result in a missed head vote if the BN was requested to produce an attestation for an earlier slot than the head block during the (usually) short window of time between verifying a block and setting it as the head.
This bug was noticed in an [Antithesis](https://andreagrieser.com/) test and diagnosed by @realbigsean.
## Additional Info
NA
# Description
Since the `TaskExecutor` currently requires a `Weak<Runtime>`, it's impossible to use it in an async test where the `Runtime` is created outside our scope. Whilst we *could* create a new `Runtime` instance inside the async test, dropping that `Runtime` would cause a panic (you can't drop a `Runtime` in an async context).
To address this issue, this PR creates the `enum Handle`, which supports either:
- A `Weak<Runtime>` (for use in our production code)
- A `Handle` to a runtime (for use in testing)
In theory, there should be no change to the behaviour of our production code (beyond some slightly different descriptions in HTTP 500 errors), or even our tests. If there is no change, you might ask *"why bother?"*. There are two PRs (#3070 and #3175) that are waiting on these fixes to introduce some new tests. Since we've added the EL to the `BeaconChain` (for the merge), we are now doing more async stuff in tests.
I've also added a `RuntimeExecutor` to the `BeaconChainTestHarness`. Whilst that's not immediately useful, it will become useful in the near future with all the new async testing.
Code simplifications using `Option`/`Result` combinators to make pattern-matches a tad simpler.
Opinions on these loosely held, happy to adjust in review.
Tool-aided by [comby-rust](https://github.com/huitseeker/comby-rust).
## Proposed Changes
Reduce post-merge disk usage by not storing finalized execution payloads in Lighthouse's database.
⚠️ **This is achieved in a backwards-incompatible way for networks that have already merged** ⚠️. Kiln users and shadow fork enjoyers will be unable to downgrade after running the code from this PR. The upgrade migration may take several minutes to run, and can't be aborted after it begins.
The main changes are:
- New column in the database called `ExecPayload`, keyed by beacon block root.
- The `BeaconBlock` column now stores blinded blocks only.
- Lots of places that previously used full blocks now use blinded blocks, e.g. analytics APIs, block replay in the DB, etc.
- On finalization:
- `prune_abanonded_forks` deletes non-canonical payloads whilst deleting non-canonical blocks.
- `migrate_db` deletes finalized canonical payloads whilst deleting finalized states.
- Conversions between blinded and full blocks are implemented in a compositional way, duplicating some work from Sean's PR #3134.
- The execution layer has a new `get_payload_by_block_hash` method that reconstructs a payload using the EE's `eth_getBlockByHash` call.
- I've tested manually that it works on Kiln, using Geth and Nethermind.
- This isn't necessarily the most efficient method, and new engine APIs are being discussed to improve this: https://github.com/ethereum/execution-apis/pull/146.
- We're depending on the `ethers` master branch, due to lots of recent changes. We're also using a workaround for https://github.com/gakonst/ethers-rs/issues/1134.
- Payload reconstruction is used in the HTTP API via `BeaconChain::get_block`, which is now `async`. Due to the `async` fn, the `blocking_json` wrapper has been removed.
- Payload reconstruction is used in network RPC to serve blocks-by-{root,range} responses. Here the `async` adjustment is messier, although I think I've managed to come up with a reasonable compromise: the handlers take the `SendOnDrop` by value so that they can drop it on _task completion_ (after the `fn` returns). Still, this is introducing disk reads onto core executor threads, which may have a negative performance impact (thoughts appreciated).
## Additional Info
- [x] For performance it would be great to remove the cloning of full blocks when converting them to blinded blocks to write to disk. I'm going to experiment with a `put_block` API that takes the block by value, breaks it into a blinded block and a payload, stores the blinded block, and then re-assembles the full block for the caller.
- [x] We should measure the latency of blocks-by-root and blocks-by-range responses.
- [x] We should add integration tests that stress the payload reconstruction (basic tests done, issue for more extensive tests: https://github.com/sigp/lighthouse/issues/3159)
- [x] We should (manually) test the schema v9 migration from several prior versions, particularly as blocks have changed on disk and some migrations rely on being able to load blocks.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Fix a panic due to misuse of the Tokio executor when processing a forkchoiceUpdated response. We were previously calling `process_invalid_execution_payload` from the async function `update_execution_engine_forkchoice_async`, which resulted in a panic because `process_invalid_execution_payload` contains a call to fork choice, which ultimately calls `block_on`.
An example backtrace can be found here: https://gist.github.com/michaelsproul/ac5da03e203d6ffac672423eaf52fb20
## Proposed Changes
Wrap the call to `process_invalid_execution_payload` in a `spawn_blocking` so that `block_on` is no longer called from an async context.
## Additional Info
- I've been thinking about how to catch bugs like this with static analysis (a new Clippy lint).
- The payload validation tests have been re-worked to support distinct responses from the mock EE for newPayload and forkchoiceUpdated. Three new tests have been added covering the `Invalid`, `InvalidBlockHash` and `InvalidTerminalBlock` cases.
- I think we need a bunch more tests of different legal and illegal variations
## Issue Addressed
N/A
## Proposed Changes
Previously, we were using `Sleep::is_elapsed()` to check if the shutdown timeout had triggered without polling the sleep. This PR polls the sleep timer.
## Issue Addressed
We still ping peers that are considered in a disconnecting state
## Proposed Changes
Do not ping peers once we decide they are disconnecting
Upgrade logs about ignored rpc messages
## Additional Info
--
## Issue Addressed
NA
## Proposed Changes
Disallow the production of attestations and retrieval of unaggregated attestations when they reference an optimistic head. Add tests to this end.
I also moved `BeaconChain::produce_unaggregated_attestation_for_block` to the `BeaconChainHarness`. It was only being used during tests, so it's nice to stop pretending it's production code. I also needed something that could produce attestations to optimistic blocks in order to simulate scenarios where the justified checkpoint is determined invalid (if no one would attest to an optimistic block, we could never justify it and then flip it to invalid).
## Additional Info
- ~~Blocked on #3126~~
## Issue Addressed
In very rare occasions we've seen most if not all our peers in a chain with which we don't agree. Purging these peers can take a very long time: number of retries of the chain. Meanwhile sync is caught in a loop trying the chain again and again. This makes it so that we fast track purging peers via registering the failed chain to prevent retrying for some time (30 seconds). Longer times could be dangerous since a chain can fail if a batch fails to download for example. In this case, I think it's still acceptable to fast track purging peers since they are nor providing the required info anyway
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
Addresses sync stalls on v2.2.0 (i.e. https://github.com/sigp/lighthouse/issues/3147).
## Additional Info
I've avoided doing a full `cargo update` because I noticed there's a new patch version of libp2p and thought it could do with some more testing.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Fixes an issue introduced in #3088 which was causing unnecessary `crit` logs on networks without Bellatrix enabled.
## Additional Info
NA
## Issue Addressed
N/A
## Proposed Changes
https://github.com/sigp/lighthouse/pull/3133 changed the rpc type limits to be fork aware i.e. if our current fork based on wall clock slot is Altair, then we apply only altair rpc type limits. This is a bug because phase0 blocks can still be sent over rpc and phase 0 block minimum size is smaller than altair block minimum size. So a phase0 block with `size < SIGNED_BEACON_BLOCK_ALTAIR_MIN` will return an `InvalidData` error as it doesn't pass the rpc types bound check.
This error can be seen when we try syncing pre-altair blocks with size smaller than `SIGNED_BEACON_BLOCK_ALTAIR_MIN`.
This PR fixes the issue by also accounting for forks earlier than current_fork in the rpc limits calculation in the `rpc_block_limits_by_fork` function. I decided to hardcode the limits in the function because that seemed simpler than calculating previous forks based on current fork and doing a min across forks. Adding a new fork variant is simple and can the limits can be easily checked in a review.
Adds unit tests and modifies the syncing simulator to check the syncing from across fork boundaries.
The syncing simulator's block 1 would always be of phase 0 minimum size (404 bytes) which is smaller than altair min block size (since block 1 contains no attestations).
## Issue Addressed
NA
## Proposed Changes
Ensures that a `VALID` response from a `forkchoiceUpdate` call will update that block in `ProtoArray`.
I also had to modify the mock execution engine so it wouldn't return valid when all payloads were supposed to be some other static value.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Adds more checks to prevent importing blocks atop parent with invalid execution payloads.
- Adds a test for these conditions.
## Additional Info
NA
## Proposed Changes
Cut release v2.2.0 including proposer boost.
## Additional Info
I also updated the clippy lints for the imminent release of Rust 1.60, although LH v2.2.0 will continue to compile using Rust 1.58 (our MSRV).
## Proposed Changes
I did some gardening 🌳 in our dependency tree:
- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve#3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.
Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.
## Additional Info
Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.
I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
## Issue Addressed
N/A
## Proposed Changes
Fix the upper bound for blocks by root responses to be equal to the max merge block size instead of altair.
Further make the rpc response limits fork aware.
## Proposed Changes
Increase the default `--slots-per-restore-point` to 8192 for a 4x reduction in freezer DB disk usage.
Existing nodes that use the previous default of 2048 will be left unchanged. Newly synced nodes (with or without checkpoint sync) will use the new 8192 default.
Long-term we could do away with the freezer DB entirely for validator-only nodes, but this change is much simpler and grants us some extra space in the short term. We can also roll it out gradually across our nodes by purging databases one by one, while keeping the Ansible config the same.
## Additional Info
We ignore a change from 2048 to 8192 if the user hasn't set the 8192 explicitly. We fire a debug log in the case where we do ignore:
```
DEBG Ignoring slots-per-restore-point config in favour of on-disk value, on_disk: 2048, config: 8192
```
## Proposed Changes
Add a `lighthouse db` command with three initial subcommands:
- `lighthouse db version`: print the database schema version.
- `lighthouse db migrate --to N`: manually upgrade (or downgrade!) the database to a different version.
- `lighthouse db inspect --column C`: log the key and size in bytes of every value in a given `DBColumn`.
This PR lays the groundwork for other changes, namely:
- Mark's fast-deposit sync (https://github.com/sigp/lighthouse/pull/2915), for which I think we should implement a database downgrade (from v9 to v8).
- My `tree-states` work, which already implements a downgrade (v10 to v8).
- Standalone purge commands like `lighthouse db purge-dht` per https://github.com/sigp/lighthouse/issues/2824.
## Additional Info
I updated the `strum` crate to 0.24.0, which necessitated some changes in the network code to remove calls to deprecated methods.
Thanks to @winksaville for the motivation, and implementation work that I used as a source of inspiration (https://github.com/sigp/lighthouse/pull/2685).
## Issue Addressed
MEV boost compatibility
## Proposed Changes
See #2987
## Additional Info
This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).
Additional TODO's and outstanding questions
- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
- Update the JSON-RPC id field for both our request and response objects to be a `serde_json::Value` rather than a `u32`. This field could be a string or a number according to the JSON-RPC 2.0 spec. We only ever set it to a number, but if, for example, we get a response that wraps this number in quotes, we would fail to deserialize it. I think because we're not doing any validation around this id otherwise, we should be less strict with it in this regard.
## Additional Info
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
In the first Goerli shadow-fork, Lighthouse was getting timeouts from Geth which prevented the LH+Geth pair from progressing.
There's not a whole lot of information I can use to set these timeouts. The most interesting pieces of information I have are quotes from Marius from Geth:
- *"Fcu also needs to construct the block which can take 2sec"* ([Discord](https://discord.com/channels/595666850260713488/910910348922589184/958006487052066836))
- *"2 sec should be ok for new payload, weird that it times out"* ([Discord](https://discord.com/channels/595666850260713488/910910348922589184/958006487052066836))
I don't think we should be so worried about getting these timeouts correct now. No one really knows how long the various EEs are going to take, it's a bit too early in development. With these changes I'm giving some headroom so that we don't fail just because EEs are quite optimized enough. I've set the value to 6s (half a mainnet slot), since I think anything beyond 6s is an interesting problem that we want to know about sooner rather than later.
## Additional Info
NA
## Issue Addressed
N/A
## Proposed Changes
Set the engine state to `EngineState::Offline` if the engine api call fails during broadcast. This caused issues while pausing sync when the execution engine is offline because `EngineState` always returned `Synced`.
## Proposed Changes
Allow Lighthouse to speculatively create blocks via the `/eth/v1/validators/blocks` endpoint by optionally skipping the RANDAO verification that we introduced in #2740. When `verify_randao=false` is passed as a query parameter the `randao_reveal` is not required to be present, and if present will only be lightly checked (must be a valid BLS sig). If `verify_randao` is omitted it defaults to true and Lighthouse behaves exactly as it did previously, hence this PR is backwards-compatible.
I'd like to get this change into `unstable` pretty soon as I've got 3 projects building on top of it:
- [`blockdreamer`](https://github.com/michaelsproul/blockdreamer), which mocks block production every slot in order to fingerprint clients
- analysis of Lighthouse's block packing _optimality_, which uses `blockdreamer` to extract interesting instances of the attestation packing problem
- analysis of Lighthouse's block packing _performance_ (as in speed) on the `tree-states` branch
## Additional Info
Having tested `blockdreamer` with Prysm, Nimbus and Teku I noticed that none of them verify the randao signature on `/eth/v1/validator/blocks`. I plan to open a PR to the `beacon-APIs` repo anyway so that this parameter can be standardised in case the other clients add RANDAO verification by default in future.
## Issue Addressed
No issue, just updating merge ASCII art.
## Proposed Changes
Updating ASCII art for merge.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
#3103
## Proposed Changes
Parse `http-address` and `metrics-address` as `IpAddr` for both the beacon node and validator client to support IPv6 addresses.
Also adjusts parsing of CORS origins to allow for IPv6 addresses.
## Usage
You can now set `http-address` and/or `metrics-address` flags to IPv6 addresses.
For example, the following:
`lighthouse bn --http --http-address :: --metrics --metrics-address ::1`
will expose the beacon node HTTP server on `[::]` (equivalent of `0.0.0.0` in IPv4) and the metrics HTTP server on `localhost` (the equivalent of `127.0.0.1` in IPv4)
The beacon node API can then be accessed by:
`curl "http://[server-ipv6-address]:5052/eth/v1/some_endpoint"`
And the metrics server api can be accessed by:
`curl "http://localhost:5054/metrics"` or by `curl "http://[::1]:5054/metrics"`
## Additional Info
On most Linux distributions the `v6only` flag is set to `false` by default (see the section for the `IPV6_V6ONLY` flag in https://www.man7.org/linux/man-pages/man7/ipv6.7.html) which means IPv4 connections will continue to function on a IPv6 address (providing it is appropriately mapped). This means that even if the Lighthouse API is running on `::` it is also possible to accept IPv4 connections.
However on Windows, this is not the case. The `v6only` flag is set to `true` so binding to `::` will only allow IPv6 connections.
## Issue Addressed
Removes the await points in sync waiting for a processor response for rpc block processing. Built on top of #3029
This also handles a couple of bugs in the previous code and adds a relatively comprehensive test suite.
## Issue Addressed
NA
## Proposed Changes
- Bump version to `v2.1.4`
- Run `cargo update`
## Additional Info
I think this release should be published around the 15th of March.
Presently `blocked` for testing on our infrastructure.
## Issue Addressed
This address an issue which was preventing checkpoint-sync.
When the node starts from checkpoint sync, the head block and the finalized block are the same value. We did not respect this when sending a `forkchoiceUpdated` (fcU) call to the EL and were expecting fork choice to hold the *finalized ancestor of the head* and returning an error when it didn't.
This PR uses *only fork choice* for sending fcU updates. This is actually quite nice and avoids some atomicity issues between `chain.canonical_head` and `chain.fork_choice`. Now, whenever `chain.fork_choice.get_head` returns a value we also cache the values required for the next fcU call.
## TODO
- [x] ~~Blocked on #3043~~
- [x] Ensure there isn't a warn message at startup.
## Issue Addressed
Don't send an fcU message at startup if it's pre-genesis. The startup fcU message is not critical, not required by the spec, so it's fine to avoid it for networks that start post-Bellatrix fork.
## Issue Addressed
Resolves#2936
## Proposed Changes
Adds functionality for calling [`validator/prepare_beacon_proposer`](https://ethereum.github.io/beacon-APIs/?urls.primaryName=dev#/Validator/prepareBeaconProposer) in advance.
There is a `BeaconChain::prepare_beacon_proposer` method which, which called, computes the proposer for the next slot. If that proposer has been registered via the `validator/prepare_beacon_proposer` API method, then the `beacon_chain.execution_layer` will be provided the `PayloadAttributes` for us in all future forkchoiceUpdated calls. An artificial forkchoiceUpdated call will be created 4s before each slot, when the head updates and when a validator updates their information.
Additionally, I added strict ordering for calls from the `BeaconChain` to the `ExecutionLayer`. I'm not certain the `ExecutionLayer` will always maintain this ordering, but it's a good start to have consistency from the `BeaconChain`. There are some deadlock opportunities introduced, they are documented in the code.
## Additional Info
- ~~Blocked on #2837~~
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
## Issue Addressed
Resolves#3015
## Proposed Changes
Add JWT token based authentication to engine api requests. The jwt secret key is read from the provided file and is used to sign tokens that are used for authenticated communication with the EL node.
- [x] Interop with geth (synced `merge-devnet-4` with the `merge-kiln-v2` branch on geth)
- [x] Interop with other EL clients (nethermind on `merge-devnet-4`)
- [x] ~Implement `zeroize` for jwt secrets~
- [x] Add auth server tests with `mock_execution_layer`
- [x] Get auth working with the `execution_engine_integration` tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#3010
## Proposed Changes
- move log debounce time latch to `./common/logging`
- add timelatch to limit logging for `attestations_delay_queue` and `queued_block_roots`
## Additional Info
- Is a separate crate for the time latch preferred?
- `elapsed()` could take `LOG_DEBOUNCE_INTERVAL ` as an argument to allow for different granularity.
## Issue Addressed
Addresses spec changes from v1.1.0:
- https://github.com/ethereum/consensus-specs/pull/2830
- https://github.com/ethereum/consensus-specs/pull/2846
## Proposed Changes
* Downgrade the REJECT for `HeadBlockFinalized` to an IGNORE. This applies to both unaggregated and aggregated attestations.
## Additional Info
I thought about also changing the penalty for `UnknownTargetRoot` but I don't think it's reachable in practice.
## Issue Addressed
As discussed on last-night's consensus call, the testnets next week will target the [Kiln Spec v2](https://hackmd.io/@n0ble/kiln-spec).
Presently, we support Kiln V1. V2 is backwards compatible, except for renaming `random` to `prev_randao` in:
- https://github.com/ethereum/execution-apis/pull/180
- https://github.com/ethereum/consensus-specs/pull/2835
With this PR we'll no longer be compatible with the existing Kintsugi and Kiln testnets, however we'll be ready for the testnets next week. I raised this breaking change in the call last night, we are all keen to move forward and break things.
We now target the [`merge-kiln-v2`](https://github.com/MariusVanDerWijden/go-ethereum/tree/merge-kiln-v2) branch for interop with Geth. This required adding the `--http.aauthport` to the tester to avoid a port conflict at startup.
### Changes to exec integration tests
There's some change in the `merge-kiln-v2` version of Geth that means it can't compile on a vanilla Github runner. Bumping the `go` version on the runner solved this issue.
Whilst addressing this, I refactored the `testing/execution_integration` crate to be a *binary* rather than a *library* with tests. This means that we don't need to run the `build.rs` and build Geth whenever someone runs `make lint` or `make test-release`. This is nice for everyday users, but it's also nice for CI so that we can have a specific runner for these tests and we don't need to ensure *all* runners support everything required to build all execution clients.
## More Info
- [x] ~~EF tests are failing since the rename has broken some tests that reference the old field name. I have been told there will be new tests released in the coming days (25/02/22 or 26/02/22).~~
## Issue Addressed
#3006
## Proposed Changes
This PR changes the default behaviour of lighthouse to ignore discovered IPs that are not globally routable. It adds a CLI flag, --enable-local-discovery to permit the non-global IPs in discovery.
NOTE: We should take care in merging this as I will break current set-ups that rely on local IP discovery. I made this the non-default behaviour because we dont really want to be wasting resources attempting to connect to non-routable addresses and we dont want to propagate these to others (on the chance we can connect to one of these local nodes), improving discoveries efficiency.
## Description
This PR adds a single, trivial commit (f5d2b27d78349d5a675a2615eba42cc9ae708094) atop #2986 to resolve a tests compile error. The original author (@ethDreamer) is AFK so I'm getting this one merged ☺️
Please see #2986 for more information about the other, significant changes in this PR.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
## Issue Addressed
NA
## Proposed Changes
Adds the functionality to allow blocks to be validated/invalidated after their import as per the [optimistic sync spec](https://github.com/ethereum/consensus-specs/blob/dev/sync/optimistic.md#how-to-optimistically-import-blocks). This means:
- Updating `ProtoArray` to allow flipping the `execution_status` of ancestors/descendants based on payload validity updates.
- Creating separation between `execution_layer` and the `beacon_chain` by creating a `PayloadStatus` struct.
- Refactoring how the `execution_layer` selects a `PayloadStatus` from the multiple statuses returned from multiple EEs.
- Adding testing framework for optimistic imports.
- Add `ExecutionBlockHash(Hash256)` new-type struct to avoid confusion between *beacon block roots* and *execution payload hashes*.
- Add `merge` to [`FORKS`](c3a793fd73/Makefile (L17)) in the `Makefile` to ensure we test the beacon chain with merge settings.
- Fix some tests here that were failing due to a missing execution layer.
## TODO
- [ ] Balance tests
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Proposed Changes
Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.
## Additional Info
We need this PR to unblock CI.
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the block packing data for all blocks over a discrete range of epochs.
## Usage
### Request
```
curl "http:localhost:5052/lighthouse/analysis/block_packing_efficiency?start_epoch=57730&end_epoch=57732"
```
### Response
```
[
{
"slot": "1847360",
"block_hash": "0xa7dc230659802df2f99ea3798faede2e75942bb5735d56e6bfdc2df335dcd61f",
"proposer_info": {
"validator_index": 1686,
"graffiti": ""
},
"available_attestations": 7096,
"included_attestations": 6459,
"prior_skip_slots": 0
},
...
]
```
## Additional Info
This is notably different to the existing lcli code:
- Uses `BlockReplayer` #2863 and as such runs significantly faster than the previous method.
- Corrects the off-by-one #2878
- Removes the `offline` validators component. This was only a "best guess" and simply was used as a way to determine an estimate of the "true" packing efficiency and was generally not helpful in terms of direct comparisons between different packing methods. As such it has been removed from the API and any future estimates of "offline" validators would be better suited in a separate/more targeted API or as part of 'beacon watch': #2873
- Includes `prior_skip_slots`.
## Issue Addressed
Closes#2880
## Proposed Changes
Support requests to the next epoch in proposer_duties api.
## Additional Info
Implemented with skipping proposer cache for this case because the cache for the future epoch will be missed every new slot as dependent_root is changed and we don't want to "wash it out" by saving additional values.
## Issue Addressed
I noticed in some logs some excess and unecessary discovery queries. What was happening was we were pruning our peers down to our outbound target and having some disconnect. When we are below this threshold we try to find more peers (even if we are at our peer limit). The request becomes futile because we have no more peer slots.
This PR corrects this issue and advances the pruning mechanism to favour subnet peers.
An overview the new logic added is:
- We prune peers down to a target outbound peer count which is higher than the minimum outbound peer count.
- We only search for more peers if there is room to do so, and we are below the minimum outbound peer count not the target. So this gives us some buffer for peers to disconnect. The buffer is currently 10%
The modified pruning logic is documented in the code but for reference it should do the following:
- Prune peers with bad scores first
- If we need to prune more peers, then prune peers that are subscribed to a long-lived subnet
- If we still need to prune peers, the prune peers that we have a higher density of on any given subnet which should drive for uniform peers across all subnets.
This will need a bit of testing as it modifies some significant peer management behaviours in lighthouse.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Closes#3014
## Proposed Changes
- Rename `receipt_root` to `receipts_root`
- Rename `execute_payload` to `notify_new_payload`
- This is slightly weird since we modify everything except the actual HTTP call to the engine API. That change is expected to be implemented in #2985 (cc @ethDreamer)
- Enable "random" tests for Bellatrix.
## Notes
This will break *partially* compatibility with Kintusgi testnets in order to gain compatibility with [Kiln](https://hackmd.io/@n0ble/kiln-spec) testnets. I think it will only break the BN APIs due to the `receipts_root` change, however it might have some other effects too.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Lighthouse gossiping late messages
## Proposed Changes
Point LH to our fork using tokio interval, which 1) works as expected 2) is more performant than the previous version that actually worked as expected
Upgrade libp2p
## Additional Info
https://github.com/libp2p/rust-libp2p/issues/2497
## Issue Addressed
#2883
## Proposed Changes
* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs
## Additional Info
Changed the Implementation following the discussion in #2883.
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
## Issue Addressed
On a network with few nodes, it is possible that the same node can be found from a subnet discovery and a normal peer discovery at the same time.
The network behaviour loads these peers into events and processes them when it has the chance. It can happen that the same peer can enter the event queue more than once and then attempt to be dialed twice.
This PR shifts the registration of nodes in the peerdb as being dialed before they enter the NetworkBehaviour queue, preventing multiple attempts of the same peer being entered into the queue and avoiding the race condition.
## Issue Addressed
#2947
## Proposed Changes
Store messages that fail to be published due to insufficient peers for retry later. Messages expire after half an epoch and are retried if gossipsub informs us that an useful peer has connected. Currently running in Atlanta
## Additional Info
If on retry sending the messages fails they will not be tried again
## Issue Addressed
NA
## Proposed Changes
Checks to see if attestations or sync messages are still valid before "accepting" them for propagation.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds `STRICT_LATE_MESSAGE_PENALTIES: bool` which allows for toggling penalties for late sync/attn messages.
`STRICT_LATE_MESSAGE_PENALTIES` is set to `false`, since we're seeing a lot of late messages on the network which are causing peer drops. We can toggle the bool during testing to try and figure out what/who is the cause of these late messages.
In effect, this PR *relaxes* peer downscoring for late attns and sync committee messages.
## Additional Info
- ~~Blocked on #2974~~
The gossipsub history was increased to a good portion of a slot from 2.1 seconds in the last release.
Although it shouldn't cause too much issue, it could be related to recieving later messages than usual and interacting with our scoring system penalizing peers. For consistency, this PR reduces the time we gossip messages back to the same values of the previous release.
It also adjusts the gossipsub heartbeat time for testing purposes with a developer flag but this should not effect end users.
## Issue Addressed
This PR fixes the unnecessary `WARN Single block lookup failed` messages described here:
https://github.com/sigp/lighthouse/pull/2866#issuecomment-1008442640
## Proposed Changes
Add a new cache to the `BeaconChain` that tracks the block roots of blocks from before finalization. These could be blocks from the canonical chain (which might need to be read from disk), or old pre-finalization blocks that have been forked out.
The cache also stores a set of block roots for in-progress single block lookups, which duplicates some of the information from sync's `single_block_lookups` hashmap:
a836e180f9/beacon_node/network/src/sync/manager.rs (L192-L196)
On a live node you can confirm that the cache is working by grepping logs for the message: `Rejected attestation to finalized block`.
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the attestation performances of a validator (or all validators) over a discrete range of epochs.
Performances can be computed for a single validator, or for the global validator set.
## Usage
### Request
The API can be used as follows:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/{validator_index}?start_epoch=57730&end_epoch=57732"
```
Alternatively, to compute performances for the global validator set:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/global?start_epoch=57730&end_epoch=57732"
```
### Response
The response is JSON formatted as follows:
```
[
{
"index": 72,
"epochs": {
"57730": {
"active": true,
"head": false,
"target": false,
"source": false
},
"57731": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
"57732": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
}
}
]
```
> Note that the `"epochs"` are not guaranteed to be in ascending order.
## Additional Info
- This API is intended to be used in our upcoming validator analysis tooling (#2873) and will likely not be very useful for regular users. Some advanced users or block explorers may find this API useful however.
- The request range is limited to 100 epochs (since the range is inclusive and it also computes the `end_epoch` it's actually 101 epochs) to prevent Lighthouse using exceptionally large amounts of memory.
Checking how to priorize the polling of the network I moved most of the service code to functions. This change I think it's worth on it's own for code quality since inside the `tokio::select` many tools don't work (cargo fmt, sometimes clippy, and sometimes even the compiler's errors get wack). This is functionally equivalent to the previous code, just better organized
## Proposed Changes
Initially the idea was to remove hashing of blocks in backfill sync. After considering it more, we conclude that we need to do it in both (forward and backfill) anyway. But since we forgot why we were doing it in the first place, this PR documents this logic.
Future us should find it useful
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
NA
## Proposed Changes
- Bump Lighthouse version to v2.1.1
- Update `thread_local` from v1.1.3 to v1.1.4 to address https://rustsec.org/advisories/RUSTSEC-2022-0006
## Additional Info
- ~~Blocked on #2950~~
- ~~Blocked on #2952~~
In the latest release we decreased the target number of subnet peers.
It appears this could be causing issues in some cases and so reverting it back to the previous number it wise. A larger PR that follows this will address some other related discovery issues and peer management around subnet peer discovery.
#2923
Which issue # does this PR address?
There's a redundant field on the BeaconChain called disabled_forks that was once part of our fork-aware networking (#953) but which is no longer used and could be deleted. so Removed all references to disabled_forks so that the code compiles and git grep disabled_forks returns no results.
## Proposed Changes
Please list or describe the changes introduced by this PR.
Removed all references of disabled_forks
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
We emit a warning to verify that all peer connection state information is consistent. A warning is given under one edge case;
We try to dial a peer with peer-id X and multiaddr Y. The peer responds to multiaddr Y with a different peer-id, Z. The dialing to the peer fails, but libp2p injects the failed attempt as peer-id Z.
In this instance, our PeerDB tries to add a new peer in the disconnected state under a previously unknown peer-id. This is harmless and so this PR permits this behaviour without logging a warning.
## Issues Addressed
Closes#2739Closes#2812
## Proposed Changes
Support the deserialization of query strings containing duplicate keys into their corresponding types.
As `warp` does not support this feature natively (as discussed in #2739), it relies on the external library [`serde_array_query`](https://github.com/sigp/serde_array_query) (written by @michaelsproul)
This is backwards compatible meaning that both of the following requests will produce the same output:
```
curl "http://localhost:5052/eth/v1/events?topics=head,block"
```
```
curl "http://localhost:5052/eth/v1/events?topics=head&topics=block"
```
## Additional Info
Certain error messages have changed slightly. This only affects endpoints which accept multiple values.
For example:
```
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
is now
```
{"code":400,"message":"BAD_REQUEST: unable to parse query","stacktraces":[]}
```
The serve order of the endpoints `get_beacon_state_validators` and `get_beacon_state_validators_id` have flipped:
```rust
.or(get_beacon_state_validators_id.boxed())
.or(get_beacon_state_validators.boxed())
```
This is to ensure proper error messages when filter fallback occurs due to the use of the `and_then` filter.
## Future Work
- Cleanup / remove filter fallback behaviour by substituting `and_then` with `then` where appropriate.
- Add regression tests for HTTP API error messages.
## Credits
- @mooori for doing the ground work of investigating possible solutions within the existing Rust ecosystem.
- @michaelsproul for writing [`serde_array_query`](https://github.com/sigp/serde_array_query) and for helping debug the behaviour of the `warp` filter fallback leading to incorrect error messages.
## Proposed Changes
Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.
I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.
Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
## Issue Addressed
NA
## Proposed Changes
In https://github.com/sigp/lighthouse/pull/2832 we made some changes to the `SnapshotCache` to help deal with the one-block reorgs seen on mainnet (and testnets).
I believe the change in #2832 is good and we should keep it, but I think that in its present form it is causing the `SnapshotCache` to hold onto states that it doesn't need anymore. For example, a skip slot will result in one more `BeaconSnapshot` being stored in the cache.
This PR adds a new type of pruning that happens after a block is inserted to the cache. We will remove any snapshot from the cache that is a *grandparent* of the block being imported. Since we know the grandparent has two valid blocks built atop it, it is not at risk from a one-block re-org.
## Additional Info
NA
## Proposed Changes
Allocate less memory in sync by hashing the `SignedBeaconBlock`s in a batch directly, rather than going via SSZ bytes.
Credit to @paulhauner for finding this source of temporary allocations.
## Issue Addressed
The PeerDB was getting out of sync with the number of disconnected peers compared to the actual count. As this value determines how many we store in our cache, over time the cache was depleting and we were removing peers immediately resulting in errors that manifest as unknown peers for some operations.
The error occurs when dialing a peer fails, we were not correctly updating the peerdb counter because the increment to the counter was placed in the wrong order and was therefore not incrementing the count.
This PR corrects this.
There is a pretty significant tradeoff between bandwidth and speed of gossipsub messages.
We can reduce our bandwidth usage considerably at the cost of minimally delaying gossipsub messages. The impact of delaying messages has not been analyzed thoroughly yet, however this PR in conjunction with some gossipsub updates show considerable bandwidth reduction.
This PR allows the user to set a CLI value (`network-load`) which is an integer in the range of 1 of 5 depending on their bandwidth appetite. 1 represents the least bandwidth but slowest message recieving and 5 represents the most bandwidth and fastest received message time.
For low-bandwidth users it is likely to be more efficient to use a lower value. The default is set to 3, which currently represents a reduced bandwidth usage compared to previous version of this PR. The previous lighthouse versions are equivalent to setting the `network-load` CLI to 4.
This PR is awaiting a few gossipsub updates before we can get it into lighthouse.
## Issue Addressed
- Resolves https://github.com/sigp/lighthouse/issues/2902
## Proposed Changes
As documented in https://github.com/sigp/lighthouse/issues/2902, there are some cases where we will score peers very harshly for sending attestations to an unknown head.
This PR removes the penalty when an attestation for an unknown head is received, queued for block look-up, then popped from the queue without the head block being known. This prevents peers from being penalized for an unknown block when that peer was never actually asked for the block.
Peer penalties should still be applied to the peers who *do* get the request for the block and fail to respond with a valid block. As such, peers who send us attestations to non-existent heads should eventually be booted.
## Additional Info
- [ ] Need to confirm that a timeout for a bbroot request will incur a penalty.
## Issue Addressed
NA
## Proposed Changes
We have observed occasions were under-resourced nodes will receive messages that were valid *at the time*, but later become invalidated due to long waits for a `BeaconProcessor` worker.
In this PR, we will check to see if the message was valid *at the time of receipt*. If it was initially valid but invalid now, we just ignore the message without penalizing the peer.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
I've observed some Prater nodes (and potentially some mainnet nodes) banning peers due to validator pubkey cache lock timeouts. For the `BeaconChainError`-type of errors, they're caused by internal faults and we can't necessarily tell if the peer is bad or not. I think this is causing us to ban peers unnecessarily when running on under-resourced machines.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Introduces a cache to attestation to produce atop blocks which will become the head, but are not fully imported (e.g., not inserted into the database).
Whilst attesting to a block before it's imported is rather easy, if we're going to produce that attestation then we also need to be able to:
1. Verify that attestation.
1. Respond to RPC requests for the `beacon_block_root`.
Attestation verification (1) is *partially* covered. Since we prime the shuffling cache before we insert the block into the early attester cache, we should be fine for all typical use-cases. However, it is possible that the cache is washed out before we've managed to insert the state into the database and then attestation verification will fail with a "missing beacon state"-type error.
Providing the block via RPC (2) is also partially covered, since we'll check the database *and* the early attester cache when responding a blocks-by-root request. However, we'll still omit the block from blocks-by-range requests (until the block lands in the DB). I *think* this is fine, since there's no guarantee that we return all blocks for those responses.
Another important consideration is whether or not the *parent* of the early attester block is available in the databse. If it were not, we might fail to respond to blocks-by-root request that are iterating backwards to collect a chain of blocks. I argue that *we will always have the parent of the early attester block in the database.* This is because we are holding the fork-choice write-lock when inserting the block into the early attester cache and we do not drop that until the block is in the database.
## Issue Addressed
The fee-recipient argument of the beacon node does not allow a value to be specified:
> $ lighthouse beacon_node --merge --fee-recipient "0x332E43696A505EF45b9319973785F837ce5267b9"
> error: Found argument '0x332E43696A505EF45b9319973785F837ce5267b9' which wasn't expected, or isn't valid in this context
>
> USAGE:
> lighthouse beacon_node --fee-recipient --merge
>
> For more information try --help
## Proposed Changes
Allow specifying a value for the fee-recipient argument in beacon_node/src/cli.rs
## Additional Info
I've added .takes_value(true) and successfully proposed a block in the kintsugi testnet with my own fee-recipient address instead of the hardcoded default. I think that was just missed as the argument does not make sense without a value :)
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Ensures full roots are printed, rather than shortened versions like `0x935b…d376`.
For example, it would be nice if we could do API queries based upon the roots shown in the `Beacon chain re-org` event:
```
Jan 05 12:36:52.224 WARN Beacon chain re-org reorg_distance: 2, new_slot: 2073184, new_head: 0x8a97…2dec, new_head_parent: 0xa985…7688, previous_slot: 2073183, previous_head: 0x935b…d376, service: beacon
Jan 05 13:35:05.832 WARN Beacon chain re-org reorg_distance: 1, new_slot: 2073475, new_head: 0x9207…c6b9, new_head_parent: 0xb2ce…839b, previous_slot: 2073474, previous_head: 0x8066…92f7, service: beacon
```
## Additional Info
We should eventually fix this project-wide, however this is a short-term patch.
## Proposed Changes
Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).
The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
## Issue Addressed
N/A
## Proposed Changes
We are currently treating errors from the EL on `engine_executePayload` as `PayloadVerificationStatus::NotVerified`. This adds the block as a candidate head block in fork choice even if the EL explicitly rejected the block as invalid.
`PayloadVerificationStatus::NotVerified` should be only returned when the EL explicitly returns "syncing" imo. This PR propagates an error instead of returning `NotVerified` on EL all EL errors.
## Issue Addressed
Closes#2286Closes#2538Closes#2342
## Proposed Changes
Part II of major slasher optimisations after #2767
These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱
* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
## Issue Addressed
Successor to #2431
## Proposed Changes
* Add a `BlockReplayer` struct to abstract over the intricacies of calling `per_slot_processing` and `per_block_processing` while avoiding unnecessary tree hashing.
* Add a variant of the forwards state root iterator that does not require an `end_state`.
* Use the `BlockReplayer` when reconstructing states in the database. Use the efficient forwards iterator for frozen states.
* Refactor the iterators to remove `Arc<HotColdDB>` (this seems to be neater than making _everything_ an `Arc<HotColdDB>` as I did in #2431).
Supplying the state roots allow us to avoid building a tree hash cache at all when reconstructing historic states, which saves around 1 second flat (regardless of `slots-per-restore-point`). This is a small percentage of worst-case state load times with 200K validators and SPRP=2048 (~15s vs ~16s) but a significant speed-up for more frequent restore points: state loads with SPRP=32 should be now consistently <500ms instead of 1.5s (a ~3x speedup).
## Additional Info
Required by https://github.com/sigp/lighthouse/pull/2628
## Issue Addressed
#2834
## Proposed Changes
Change log message severity from error to debug in attestation verification when attestation state is finalized.
## Issue Addressed
#2841
## Proposed Changes
Not counting dialing peers while deciding if we have reached the target peers in case of outbound peers.
## Additional Info
Checked this running in nodes and bandwidth looks normal, peer count looks normal too
## Proposed Changes
Remove the `is_first_block_in_epoch` logic from the balances cache update logic, as it was incorrect in the case of skipped slots. The updated code is simpler because regardless of whether the block is the first in the epoch we can check if an entry for the epoch boundary root already exists in the cache, and update the cache accordingly.
Additionally, to assist with flip-flopping justified epochs, move to cloning the balance cache rather than moving it. This should still be very fast in practice because the balances cache is a ~1.6MB `Vec`, and this operation is expected to only occur infrequently.
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Changes required for the `merge-devnet-3`. Added some more non substantive renames on top of @realbigsean 's commit.
Note: this doesn't include the proposer boosting changes in kintsugi v3.
This devnet isn't running with the proposer boosting fork choice changes so if we are looking to merge https://github.com/sigp/lighthouse/pull/2822 into `unstable`, then I think we should just maintain this branch for the devnet temporarily.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
In the event of a late block, keep the block in the snapshot cache by cloning it. This helps us process new blocks quickly in the event the late block was re-org'd.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
We were calculating justified balances incorrectly on cache misses in `set_justified_checkpoint`
## Proposed Changes
Use the `get_effective_balances` method as opposed to `state.balances`, which returns exact balances
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
New rust lints
## Proposed Changes
- Boxing some enum variants
- removing some unused fields (is the validator lockfile unused? seemed so to me)
## Additional Info
- some error fields were marked as dead code but are logged out in areas
- left some dead fields in our ef test code because I assume they are useful for debugging?
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fix max packet sizes
Fix max_payload_size function
Add merge block test
Fix max size calculation; fix up test
Clear comments
Add a payload_size_function
Use safe arith for payload calculation
Return an error if block too big in block production
Separate test to check if block is over limit
* Fix fork choice after rebase
* Remove paulhauner warp dep
* Fix fork choice test compile errors
* Assume fork choice payloads are valid
* Add comment
* Ignore new tests
* Fix error in test skipping
* Change base_fee_per_gas to Uint256
* Add custom (de)serialization to ExecutionPayload
* Fix errors
* Add a quoted_u256 module
* Remove unused function
* lint
* Add test
* Remove extra line
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Fix arbitrary check kintsugi
* Add merge chain spec fields, and a function to determine which constant to use based on the state variant
* increment spec test version
* Remove `Transaction` enum wrapper
* Remove Transaction new-type
* Remove gas validations
* Add `--terminal-block-hash-epoch-override` flag
* Increment spec tests version to 1.1.5
* Remove extraneous gossip verification https://github.com/ethereum/consensus-specs/pull/2687
* - Remove unused Error variants
- Require both "terminal-block-hash-epoch-override" and "terminal-block-hash-override" when either flag is used
* - Remove a couple more unused Error variants
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* update initializing from eth1 for merge genesis
* read execution payload header from file lcli
* add `create-payload-header` command to `lcli`
* fix base fee parsing
* Apply suggestions from code review
* default `execution_payload_header` bool to false when deserializing `meta.yml` in EF tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add payload verification status to fork choice
* Pass payload verification status to import_block
* Add valid back-propagation
* Add head safety status latch to API
* Remove ExecutionLayerStatus
* Add execution info to client notifier
* Update notifier logs
* Change use of "hash" to refer to beacon block
* Shutdown on invalid finalized block
* Tidy, add comments
* Fix failing FC tests
* Allow blocks with unsafe head
* Fix forkchoiceUpdate call on startup
* Ignore payload errors
* Only return payload handle on valid response
* Push some engine logs down to debug
* Push ee fork choice log to debug
* Push engine call failure to debug
* Push some more errors to debug
* Fix panic at startup
* Reject some HTTP endpoints when EL is not ready
* Restrict more endpoints
* Add watchdog task
* Change scheduling
* Update to new schedule
* Add "syncing" concept
* Remove RequireSynced
* Add is_merge_complete to head_info
* Cache latest_head in Engines
* Call consensus_forkchoiceUpdate on startup
* Thread eth1_block_hash into interop genesis state
* Add merge-fork-epoch flag
* Build LH with minimal spec by default
* Add verbose logs to execution_layer
* Add --http-allow-sync-stalled flag
* Update lcli new-testnet to create genesis state
* Fix http test
* Fix compile errors in tests
* Start adding merge tests
* Expose MockExecutionLayer
* Add mock_execution_layer to BeaconChainHarness
* Progress with merge test
* Return more detailed errors with gas limit issues
* Use a better gas limit in block gen
* Ensure TTD is met in block gen
* Fix basic_merge tests
* Start geth testing
* Fix conflicts after rebase
* Remove geth tests
* Improve merge test
* Address clippy lints
* Make pow block gen a pure function
* Add working new test, breaking existing test
* Fix test names
* Add should_panic
* Don't run merge tests in debug
* Detect a tokio runtime when starting MockServer
* Fix clippy lint, include merge tests
* - Update the fork choice `ProtoNode` to include `is_merge_complete`
- Add database migration for the persisted fork choice
* update tests
* Small cleanup
* lints
* store execution block hash in fork choice rather than bool
Added Execution Payload from Rayonism Fork
Updated new Containers to match Merge Spec
Updated BeaconBlockBody for Merge Spec
Completed updating BeaconState and BeaconBlockBody
Modified ExecutionPayload<T> to use Transaction<T>
Mostly Finished Changes for beacon-chain.md
Added some things for fork-choice.md
Update to match new fork-choice.md/fork.md changes
ran cargo fmt
Added Missing Pieces in eth2_libp2p for Merge
fix ef test
Various Changes to Conform Closer to Merge Spec
## Issue Addressed
Closes#1996
## Proposed Changes
Run a second `Logger` via `sloggers` which logs to a file in the background with:
- separate `debug-level` for background and terminal logging
- the ability to limit log size
- rotation through a customizable number of log files
- an option to compress old log files (`.gz` format)
Add the following new CLI flags:
- `--logfile-debug-level`: The debug level of the log files
- `--logfile-max-size`: The maximum size of each log file
- `--logfile-max-number`: The number of old log files to store
- `--logfile-compress`: Whether to compress old log files
By default background logging uses the `debug` log level and saves logfiles to:
- Beacon Node: `$HOME/.lighthouse/$network/beacon/logs/beacon.log`
- Validator Client: `$HOME/.lighthouse/$network/validators/logs/validator.log`
Or, when using the `--datadir` flag:
`$datadir/beacon/logs/beacon.log` and `$datadir/validators/logs/validator.log`
Once rotated, old logs are stored like so: `beacon.log.1`, `beacon.log.2` etc.
> Note: `beacon.log.1` is always newer than `beacon.log.2`.
## Additional Info
Currently the default value of `--logfile-max-size` is 200 (MB) and `--logfile-max-number` is 5.
This means that the maximum storage space that the logs will take up by default is 1.2GB.
(200MB x 5 from old log files + <200MB the current logfile being written to)
Happy to adjust these default values to whatever people think is appropriate.
It's also worth noting that when logging to a file, we lose our custom `slog` formatting. This means the logfile logs look like this:
```
Oct 27 16:02:50.305 INFO Lighthouse started, version: Lighthouse/v2.0.1-8edd9d4+, module: lighthouse:413
Oct 27 16:02:50.305 INFO Configured for network, name: prater, module: lighthouse:414
```
## Issue Addressed
Users are experiencing `Status'd peer not found` errors
## Proposed Changes
Although I cannot reproduce this error, this is only one connection state change that is not addressed in the peer manager (that I could see). The error occurs because the number of disconnected peers in the peerdb becomes out of sync with the actual number of disconnected peers. From what I can tell almost all possible connection state changes are handled, except for the case when a disconnected peer changes to be disconnecting. This can potentially happen at the peer connection limit, where a previously connected peer switches to disconnecting.
This PR decrements the disconnected counter when this event occurs and from what I can tell, covers all possible disconnection state changes in the peer manager.
We were batch removing chains when purging, and then updating the status of the collection for each of those. This makes the range status be out of sync with the real status. This represented no harm to the global sync status, but I've changed it to comply with a correct debug assertion that I got triggered while doing some testing.
Also added tests and improved code quality as per @paulhauner 's suggestions.
## Issue Addressed
N/A
## Proposed Changes
1. Don't disconnect peer from dht on connection limit errors
2. Bump up `PRIORITY_PEER_EXCESS` to allow for dialing upto 60 peers by default.
Co-authored-by: Diva M <divma@protonmail.com>
I had this change but it seems to have been lost in chaos of network upgrades.
The swarm dialing event seems to miss some cases where we dial via the behaviour. This causes an error to be logged as the peer manager doesn't know about some dialing events.
This shifts the logic to the behaviour to inform the peer manager.
## Issue Addressed
Part of a bigger effort to make the network globals read only. This moves all writes to the `PeerDB` to the `eth2_libp2p` crate. Limiting writes to the peer manager is a slightly more complicated issue for a next PR, to keep things reviewable.
## Proposed Changes
- Make the peers field in the globals a private field.
- Allow mutable access to the peers field to `eth2_libp2p` for now.
- Add a new network message to update the sync state.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
Running a beacon node I triggered a sync debug panic. And so finally the time to create tests for sync arrived. Fortunately, te bug was not in the sync algorithm itself but a wrong assertion
## Proposed Changes
- Split Range's impl from the BeaconChain via a trait. This is needed for testing. The TestingRig/Harness is way bigger than needed and does not provide the modification functionalities that are needed to test sync. I find this simpler, tho some could disagree.
- Add a regression test for sync that fails before the changes.
- Fix the wrong assertion.
RPC Responses are for some reason not removing their timeout when they are completing.
As an example:
```
Nov 09 01:18:20.256 DEBG Received BlocksByRange Request step: 1, start_slot: 728465, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:20.263 DEBG Received BlocksByRange Request step: 1, start_slot: 728593, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:20.483 DEBG BlocksByRange Response sent returned: 63, requested: 64, current_slot: 2466389, start_slot: 728465, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:20.500 DEBG BlocksByRange Response sent returned: 64, requested: 64, current_slot: 2466389, start_slot: 728593, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:21.068 DEBG Received BlocksByRange Request step: 1, start_slot: 728529, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:21.272 DEBG BlocksByRange Response sent returned: 63, requested: 64, current_slot: 2466389, start_slot: 728529, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:23.434 DEBG Received BlocksByRange Request step: 1, start_slot: 728657, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:23.665 DEBG BlocksByRange Response sent returned: 64, requested: 64, current_slot: 2466390, start_slot: 728657, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:25.851 DEBG Received BlocksByRange Request step: 1, start_slot: 728337, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:25.851 DEBG Received BlocksByRange Request step: 1, start_slot: 728401, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:26.094 DEBG BlocksByRange Response sent returned: 62, requested: 64, current_slot: 2466390, start_slot: 728401, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:26.100 DEBG BlocksByRange Response sent returned: 63, requested: 64, current_slot: 2466390, start_slot: 728337, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:31.070 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:31.070 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:31.085 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:31.085 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:31.459 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:31.459 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:34.129 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:34.130 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:35.686 DEBG Peer Manager disconnecting peer reason: Too many peers, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, service: libp2p
```
This PR is to investigate and correct the issue.
~~My current thoughts are that for some reason we are not closing the streams correctly, or fast enough, or the executor is not registering the closes and waking up.~~ - Pretty sure this is not the case, see message below for a more accurate reason.
~~I've currently added a timeout to stream closures in an attempt to force streams to close and the future to always complete.~~ I removed this
## Issue Addressed
Resolves#2545
## Proposed Changes
Adds the long-overdue EF tests for fork choice. Although we had pretty good coverage via other implementations that closely followed our approach, it is nonetheless important for us to implement these tests too.
During testing I found that we were using a hard-coded `SAFE_SLOTS_TO_UPDATE_JUSTIFIED` value rather than one from the `ChainSpec`. This caused a failure during a minimal preset test. This doesn't represent a risk to mainnet or testnets, since the hard-coded value matched the mainnet preset.
## Failing Cases
There is one failing case which is presently marked as `SkippedKnownFailure`:
```
case 4 ("new_finalized_slot_is_justified_checkpoint_ancestor") from /home/paul/development/lighthouse/testing/ef_tests/consensus-spec-tests/tests/minimal/phase0/fork_choice/on_block/pyspec_tests/new_finalized_slot_is_justified_checkpoint_ancestor failed with NotEqual:
head check failed: Got Head { slot: Slot(40), root: 0x9183dbaed4191a862bd307d476e687277fc08469fc38618699863333487703e7 } | Expected Head { slot: Slot(24), root: 0x105b49b51bf7103c182aa58860b039550a89c05a4675992e2af703bd02c84570 }
```
This failure is due to #2741. It's not a particularly high priority issue at the moment, so we fix it after merging this PR.
This simply moves some functions that were "swarm notifications" to a network behaviour implementation.
Notes
------
- We could disconnect from the peer manager but we would lose the rpc shutdown message
- We still notify from the swarm since this is the most reliable way to get some events. Ugly but best for now
- Events need to be pushed with "add event" to wake the waker
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2112
Closes https://github.com/sigp/lighthouse/issues/1861
## Proposed Changes
Collect attestations by validator index in the slasher, and use the magic of reference counting to automatically discard redundant attestations. This results in us storing only 1-2% of the attestations observed when subscribed to all subnets, which carries over to a 50-100x reduction in data stored 🎉
## Additional Info
There's some nuance to the configuration of the `slot-offset`. It has a profound effect on the effictiveness of de-duplication, see the docs added to the book for an explanation: 5442e695e5/book/src/slasher.md (slot-offset)
## Issue Addressed
I've done this change in a couple of WIPs already so I might as well submit it on its own. This changes no functionality but reduces coupling in a 0.0001%. It also helps new people who need to work in the peer manager to better understand what it actually needs from the outside
## Proposed Changes
Add a config to the peer manager
## Issue Addressed
The computation of metrics in the network service can be expensive. This disables the computation unless the cli flag `metrics` is set.
## Additional Info
Metrics in other parts of the network are still updated, since most are simple metrics and checking if metrics are enabled each time each metric is updated doesn't seem like a gain.
## Issue Addressed
@paulhauner noticed that when we send head events, we use the block root from `new_head` in `fork_choice_internal`, but calculate `dependent_root` and `previous_dependent_root` using the `canonical_head`. This is normally fine because `new_head` updates the `canonical_head` in `fork_choice_internal`, but it's possible we have a reorg updating `canonical_head` before our head events are sent. So this PR ensures `dependent_root` and `previous_dependent_root` are always derived from the state associated with `new_head`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2612
## Proposed Changes
Implements both the checks mentioned in the original issue.
1. Verifies the `randao_reveal` in the beacon node
2. Cross checks the proposer index after getting back the block from the beacon node.
## Additional info
The block production time increases by ~10x because of the signature verification on the beacon node (based on the `beacon_block_production_process_seconds` metric) when running on a local testnet.
## Proposed Changes
Add several metrics for the number of attestations in the op pool. These give us a way to observe the number of valid, non-trivial attestations during block packing rather than just the size of the entire op pool.
## Issue Addressed
Getting too many peers kicked due to slightly late sync committee messages as tested on.. under-performant hardware.
## Proposed Changes
Only penalize if the message is more than one slot late. Still ignore the message-
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
This is a pre-cursor to the next libp2p upgrade.
It is currently being used for staging a number of PR upgrades which are contingent on the latest libp2p.
## Issue Addressed
The [p2p-interface section of the `altair` spec](https://github.com/ethereum/consensus-specs/blob/dev/specs/altair/p2p-interface.md#transitioning-the-gossip) says you should subscribe to the topics for a fork "In advance of the fork" and unsubscribe from old topics `2 Epochs` after the new fork is activated. We've chosen to subscribe to new fork topics `2 slots` before the fork is initiated.
This function is supposed to return the required fork digests at any given time but as it was currently written, it doesn't return the fork digest for a previous fork if you've switched to the current fork less than 2 epoch's ago. Also this function required modification for every new fork we add.
## Proposed Changes
Make this function fork-agnostic and correctly handle the previous fork topic digests when you've only just switched to the new fork.
## Issue Addressed
Resolves#2611
## Proposed Changes
Adds a duplicate block root cache to the `BeaconProcessor`. Adds the block root to the cache before calling `process_gossip_block` and `process_rpc_block`. Since `process_rpc_block` is called only for single block lookups, we don't have to worry about batched block imports.
The block is imported from the source(gossip/rpc) that arrives first. The block that arrives second is not imported to avoid the db access issue.
There are 2 cases:
1. Block that arrives second is from rpc: In this case, we return an optimistic `BlockError::BlockIsAlreadyKnown` to sync.
2. Block that arrives second is from gossip: In this case, we only do gossip verification and forwarding but don't import the block into the the beacon chain.
## Additional info
Splits up `process_gossip_block` function to `process_gossip_unverified_block` and `process_gossip_verified_block`.
## Proposed Changes
* Add the `Eth-Consensus-Version` header to the HTTP API for the block and state endpoints. This is part of the v2.1.0 API that was recently released: https://github.com/ethereum/beacon-APIs/pull/170
* Add tests for the above. I refactored the `eth2` crate's helper functions to make this more straight-forward, and introduced some new mixin traits that I think greatly improve readability and flexibility.
* Add a new `map_with_fork!` macro which is useful for decoding a superstruct type without naming all its variants. It is now used for SSZ-decoding `BeaconBlock` and `BeaconState`, and for JSON-decoding `SignedBeaconBlock` in the API.
## Additional Info
The `map_with_fork!` changes will conflict with the Merge changes, but when resolving the conflict the changes from this branch should be preferred (it is no longer necessary to enumerate every fork). The merge fork _will_ need to be added to `map_fork_name_with`.
## Issue Addressed
Currently, if you launch the beacon node with the `--purge-db` flag and the `beacon` directory exists, but one (or both) of the `chain_db` or `freezer-db` directories are missing, it will error unnecessarily with:
```
Failed to remove chain_db: No such file or directory (os error 2)
```
This is an edge case which can occur in cases of manual intervention (a user deleted the directory) or if you had previously run with the `--purge-db` flag and Lighthouse errored before it could initialize the db directories.
## Proposed Changes
Check if the `chain_db`/`freezer_db` exists before attempting to remove them. This prevents unnecessary errors.
## Issue Addressed
Attempts to fix#2701 but I doubt this is the reason behind that.
## Proposed Changes
maintain a waker in the rpc handler and call it if an event is received
## Issue Addressed
In the backfill sync the state was maintained twice, once locally and also in the globals. This makes it so that it's maintained only once.
The only behavioral change is that when backfill sync in paused, the global backfill state is updated. I asked @AgeManning about this and he deemed it a bug, so this solves it.
## Issue Addressed
When compiling with Rust 1.56.0 the compiler generates 3 instances of this warning:
```
warning: trailing semicolon in macro used in expression position
--> common/eth2_network_config/src/lib.rs:181:24
|
181 | })?;
| ^
...
195 | let deposit_contract_deploy_block = load_from_file!(DEPLOY_BLOCK_FILE);
| ---------------------------------- in this macro invocation
|
= note: `#[warn(semicolon_in_expressions_from_macros)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #79813 <https://github.com/rust-lang/rust/issues/79813>
= note: this warning originates in the macro `load_from_file` (in Nightly builds, run with -Z macro-backtrace for more info)
```
This warning is completely harmless, but will be visible to users compiling Lighthouse v2.0.1 (or earlier) with Rust 1.56.0 (to be released October 21st). It is **completely safe** to ignore this warning, it's just a superficial change to Rust's syntax.
## Proposed Changes
This PR removes the semi-colon as recommended, and fixes the new Clippy lints from 1.56.0
## Issue Addressed
Mitigates #1096
## Proposed Changes
Add a flag to the beacon node called `--disable-lock-timeouts` which allows opting out of lock timeouts.
The lock timeouts serve a dual purpose:
1. They prevent any single operation from hogging the lock for too long. When a timeout occurs it logs a nasty error which indicates that there's suboptimal lock use occurring, which we can then act on.
2. They allow deadlock detection. We're fairly sure there are no deadlocks left in Lighthouse anymore but the timeout locks offer a safeguard against that.
However, timeouts on locks are not without downsides:
They allow for the possibility of livelock, particularly on slower hardware. If lock timeouts keep failing spuriously the node can be prevented from making any progress, even if it would be able to make progress slowly without the timeout. One particularly concerning scenario which could occur would be if a DoS attack succeeded in slowing block signature verification times across the network, and all Lighthouse nodes got livelocked because they timed out repeatedly. This could also occur on just a subset of nodes (e.g. dual core VPSs or Raspberri Pis).
By making the behaviour runtime configurable this PR allows us to choose the behaviour we want depending on circumstance. I suspect that long term we could make the timeout-free approach the default (#2381 moves in this direction) and just enable the timeouts on our testnet nodes for debugging purposes. This PR conservatively leaves the default as-is so we can gain some more experience before switching the default.
## Description
The `eth2_libp2p` crate was originally named and designed to incorporate a simple libp2p integration into lighthouse. Since its origins the crates purpose has expanded dramatically. It now houses a lot more sophistication that is specific to lighthouse and no longer just a libp2p integration.
As of this writing it currently houses the following high-level lighthouse-specific logic:
- Lighthouse's implementation of the eth2 RPC protocol and specific encodings/decodings
- Integration and handling of ENRs with respect to libp2p and eth2
- Lighthouse's discovery logic, its integration with discv5 and logic about searching and handling peers.
- Lighthouse's peer manager - This is a large module handling various aspects of Lighthouse's network, such as peer scoring, handling pings and metadata, connection maintenance and recording, etc.
- Lighthouse's peer database - This is a collection of information stored for each individual peer which is specific to lighthouse. We store connection state, sync state, last seen ips and scores etc. The data stored for each peer is designed for various elements of the lighthouse code base such as syncing and the http api.
- Gossipsub scoring - This stores a collection of gossipsub 1.1 scoring mechanisms that are continuously analyssed and updated based on the ethereum 2 networks and how Lighthouse performs on these networks.
- Lighthouse specific types for managing gossipsub topics, sync status and ENR fields
- Lighthouse's network HTTP API metrics - A collection of metrics for lighthouse network monitoring
- Lighthouse's custom configuration of all networking protocols, RPC, gossipsub, discovery, identify and libp2p.
Therefore it makes sense to rename the crate to be more akin to its current purposes, simply that it manages the majority of Lighthouse's network stack. This PR renames this crate to `lighthouse_network`
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Update versions to `v2.0.1` in anticipation for a release early next week.
- Add `--ignore` to `cargo audit`. See #2727.
## Additional Info
NA
## Description
This PR updates the peer connection transition logic. It is acceptable for a peer to immediately transition from a disconnected state to a disconnecting state. This can occur when we are at our peer limit and a new peer's dial us.
## Issue Addressed
NA
## Proposed Changes
Adds some more testing for Altair to the op pool. Credits to @michaelsproul for some appropriated efforts here.
## Additional Info
NA
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Clone the proposer pubkeys during backfill signature verification to reduce the time that the pubkey cache lock is held for. Cloning such a small number of pubkeys has negligible impact on the total running time, but greatly reduces lock contention.
On a Ryzen 5950X, the setup step seems to take around 180us regardless of whether the key is cloned or not, while the verification takes 7ms. When Lighthouse is limited to 10% of one core using `sudo cpulimit --pid <pid> --limit 10` the total time jumps up to 800ms, but the setup step remains only 250us. This means that under heavy load this PR could cut the time the lock is held for from 800ms to 250us, which is a huge saving of 99.97%!
## Issue Addressed
#2695
## Proposed Changes
This updates discovery to the latest version which has patched a panic that occurred due to a race condition in the bucket logic.
## Issue Addressed
NA
## Proposed Changes
This PR is near-identical to https://github.com/sigp/lighthouse/pull/2652, however it is to be merged into `unstable` instead of `merge-f2f`. Please see that PR for reasoning.
I'm making this duplicate PR to merge to `unstable` in an effort to shrink the diff between `unstable` and `merge-f2f` by doing smaller, lead-up PRs.
## Additional Info
NA
Currently, the beacon node has no ability to serve the HTTP API over TLS.
Adding this functionality would be helpful for certain use cases, such as when you need a validator client to connect to a backup beacon node which is outside your local network, and the use of an SSH tunnel or reverse proxy would be inappropriate.
## Proposed Changes
- Add three new CLI flags to the beacon node
- `--http-enable-tls`: enables TLS
- `--http-tls-cert`: to specify the path to the certificate file
- `--http-tls-key`: to specify the path to the key file
- Update the HTTP API to optionally use `warp`'s [`TlsServer`](https://docs.rs/warp/0.3.1/warp/struct.TlsServer.html) depending on the presence of the `--http-enable-tls` flag
- Update tests and docs
- Use a custom branch for `warp` to ensure proper error handling
## Additional Info
Serving the API over TLS should currently be considered experimental. The reason for this is that it uses code from an [unmerged PR](https://github.com/seanmonstar/warp/pull/717). This commit provides the `try_bind_with_graceful_shutdown` method to `warp`, which is helpful for controlling error flow when the TLS configuration is invalid (cert/key files don't exist, incorrect permissions, etc).
I've implemented the same code in my [branch here](https://github.com/macladson/warp/tree/tls).
Once the code has been reviewed and merged upstream into `warp`, we can remove the dependency on my branch and the feature can be considered more stable.
Currently, the private key file must not be password-protected in order to be read into Lighthouse.
## Proposed Changes
This is a refactor of the PeerDB and PeerManager. A number of bugs have been surfacing around the connection state of peers and their interaction with the score state.
This refactor tightens the mutability properties of peers such that only specific modules are able to modify the state of peer information preventing inadvertant state changes that can lead to our local peer manager db being out of sync with libp2p.
Further, the logic around connection and scoring was quite convoluted and the distinction between the PeerManager and Peerdb was not well defined. Although these issues are not fully resolved, this PR is step to cleaning up this logic. The peerdb solely manages most mutability operations of peers leaving high-order logic to the peer manager.
A single `update_connection_state()` function has been added to the peer-db making it solely responsible for modifying the peer's connection state. The way the peer's scores can be modified have been reduced to three simple functions (`update_scores()`, `update_gossipsub_scores()` and `report_peer()`). This prevents any add-hoc modifications of scores and only natural processes of score modification is allowed which simplifies the reasoning of score and state changes.
## Issue Addressed
Fix `cargo audit` failures on `unstable`
Closes#2698
## Proposed Changes
The main culprit is `nix`, which is vulnerable for versions below v0.23.0. We can't get by with a straight-forward `cargo update` because `psutil` depends on an old version of `nix` (cf. https://github.com/rust-psutil/rust-psutil/pull/93). Hence I've temporarily forked `psutil` under the `sigp` org, where I've included the update to `nix` v0.23.0.
Additionally, I took the chance to update the `time` dependency to v0.3, which removed a bunch of stale deps including `stdweb` which is no longer maintained. Lighthouse only uses the `time` crate in the notifier to do some pretty printing, and so wasn't affected by any of the breaking changes in v0.3 ([changelog here](https://github.com/time-rs/time/blob/main/CHANGELOG.md#030-2021-07-30)).
## Issue Addressed
Resolves#2563
Replacement for #2653 as I'm not able to reopen that PR after force pushing.
## Proposed Changes
Fixes all broken api links. Cherry picked changes in #2590 and updated a few more links.
Co-authored-by: Mason Stallmo <masonstallmo@gmail.com>
## Issue Addressed
Resolves#2555
## Proposed Changes
Don't log errors on resubscribing to topics. Also don't log errors if we are setting already set attnet/syncnet bits.
## Issue Addressed
Fix#2585
## Proposed Changes
Provide a canonical version of test_logger that can be used
throughout lighthouse.
## Additional Info
This allows tests to conditionally emit logging data by adding
test_logger as the default logger. And then when executing
`cargo test --features logging/test_logger` log output
will be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test --features logging/test_logger
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-e20115db6a5e3714)
running 1 test
Sep 10 12:53:45.212 INFO hi, module: test_logger:8
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Or, in normal scenarios where logging isn't needed, executing
`cargo test` the log output will not be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-02e02f8d41e8cf8a)
running 1 test
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
## Issue Addressed
This PR addresses an issue found by @YorickDowne during testing of v2.0.0-rc.0.
Due to a lack of atomic database writes on checkpoint sync start-up, it was possible for the database to get into an inconsistent state from which it couldn't recover without `--purge-db`. The core of the issue was that the store's anchor info was being stored _before_ the `PersistedBeaconChain`. If a crash occured so that anchor info was stored but _not_ the `PersistedBeaconChain`, then on restart Lighthouse would think the database was unitialized and attempt to compare-and-swap a `None` value, but would actually find the stale info from the previous run.
## Proposed Changes
The issue is fixed by writing the anchor info, the split point, and the `PersistedBeaconChain` atomically on start-up. Some type-hinting ugliness was required, which could possibly be cleaned up in future refactors.
## Issue Addressed
This PR addresses issue #2657
## Proposed Changes
Changes `/eth/v1/config/deposit_contract` endpoint to return the chain ID from the loaded chain spec instead of eth1::DEFAULT_NETWORK_ID which is the Goerli chain ID of 5.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Cut the first release candidate for v2.0.0, in preparation for testing and release this week
## Additional Info
Builds on #2632, which should either be merged first or in the same batch
## Issue Addressed
N/A
## Proposed Changes
When peers switching to a disconnecting state, decrement the disconnected peers counter. This also downgrades some crit logs to errors.
I've also added a re-sync point when peers get unbanned the disconnected peer count will match back to the number of disconnected peers if it has gone out of sync previously.
## Issue Addressed
Closes#2528
## Proposed Changes
- Add `BlockTimesCache` to provide block timing information to `BeaconChain`. This allows additional metrics to be calculated for blocks that are set as head too late.
- Thread the `seen_timestamp` of blocks received from RPC responses (except blocks from syncing) through to the sync manager, similar to what is done for blocks from gossip.
## Additional Info
This provides the following additional metrics:
- `BEACON_BLOCK_OBSERVED_SLOT_START_DELAY_TIME`
- The delay between the start of the slot and when the block was first observed.
- `BEACON_BLOCK_IMPORTED_OBSERVED_DELAY_TIME`
- The delay between when the block was first observed and when the block was imported.
- `BEACON_BLOCK_HEAD_IMPORTED_DELAY_TIME`
- The delay between when the block was imported and when the block was set as head.
The metric `BEACON_BLOCK_IMPORTED_SLOT_START_DELAY_TIME` was removed.
A log is produced when a block is set as head too late, e.g.:
```
Aug 27 03:46:39.006 DEBG Delayed head block set_as_head_delay: Some(21.731066ms), imported_delay: Some(119.929934ms), observed_delay: Some(3.864596988s), block_delay: 4.006257988s, slot: 1931331, proposer_index: 24294, block_root: 0x937602c89d3143afa89088a44bdf4b4d0d760dad082abacb229495c048648a9e, service: beacon
```
## Issue Addressed
Resolves#2552
## Proposed Changes
Offers some improvement in inclusion distance calculation in the validator monitor.
When registering an attestation from a block, instead of doing `block.slot() - attesstation.data.slot()` to get the inclusion distance, we now pass the parent block slot from the beacon chain and do `parent_slot.saturating_sub(attestation.data.slot())`. This allows us to give best effort inclusion distance in scenarios where the attestation was included right after a skip slot. Note that this does not give accurate results in scenarios where the attestation was included few blocks after the skip slot.
In this case, if the attestation slot was `b1` and was included in block `b2` with a skip slot in between, we would get the inclusion delay as 0 (by ignoring the skip slot) which is the best effort inclusion delay.
```
b1 <- missed <- b2
```
Here, if the attestation slot was `b1` and was included in block `b3` with a skip slot and valid block `b2` in between, then we would get the inclusion delay as 2 instead of 1 (by ignoring the skip slot).
```
b1 <- missed <- b2 <- b3
```
A solution for the scenario 2 would be to count number of slots between included slot and attestation slot ignoring the skip slots in the beacon chain and pass the value to the validator monitor. But I'm concerned that it could potentially lead to db accesses for older blocks in extreme cases.
This PR also uses the validator monitor data for logging per epoch inclusion distance. This is useful as we won't get inclusion data in post-altair summaries.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Implements the "union" type from the SSZ spec for `ssz`, `ssz_derive`, `tree_hash` and `tree_hash_derive` so it may be derived for `enums`:
https://github.com/ethereum/consensus-specs/blob/v1.1.0-beta.3/ssz/simple-serialize.md#union
The union type is required for the merge, since the `Transaction` type is defined as a single-variant union `Union[OpaqueTransaction]`.
### Crate Updates
This PR will (hopefully) cause CI to publish new versions for the following crates:
- `eth2_ssz_derive`: `0.2.1` -> `0.3.0`
- `eth2_ssz`: `0.3.0` -> `0.4.0`
- `eth2_ssz_types`: `0.2.0` -> `0.2.1`
- `tree_hash`: `0.3.0` -> `0.4.0`
- `tree_hash_derive`: `0.3.0` -> `0.4.0`
These these crates depend on each other, I've had to add a workspace-level `[patch]` for these crates. A follow-up PR will need to remove this patch, ones the new versions are published.
### Union Behaviors
We already had SSZ `Encode` and `TreeHash` derive for enums, however it just did a "transparent" pass-through of the inner value. Since the "union" decoding from the spec is in conflict with the transparent method, I've required that all `enum` have exactly one of the following enum-level attributes:
#### SSZ
- `#[ssz(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[ssz(enum_behaviour = "transparent")]`
- maintains existing functionality
- not supported for `Decode` (never was)
#### TreeHash
- `#[tree_hash(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[tree_hash(enum_behaviour = "transparent")]`
- maintains existing functionality
This means that we can maintain the existing transparent behaviour, but all existing users will get a compile-time error until they explicitly opt-in to being transparent.
### Legacy Option Encoding
Before this PR, we already had a union-esque encoding for `Option<T>`. However, this was with the *old* SSZ spec where the union selector was 4 bytes. During merge specification, the spec was changed to use 1 byte for the selector.
Whilst the 4-byte `Option` encoding was never used in the spec, we used it in our database. Writing a migrate script for all occurrences of `Option` in the database would be painful, especially since it's used in the `CommitteeCache`. To avoid the migrate script, I added a serde-esque `#[ssz(with = "module")]` field-level attribute to `ssz_derive` so that we can opt into the 4-byte encoding on a field-by-field basis.
The `ssz::legacy::four_byte_impl!` macro allows a one-liner to define the module required for the `#[ssz(with = "module")]` for some `Option<T> where T: Encode + Decode`.
Notably, **I have removed `Encode` and `Decode` impls for `Option`**. I've done this to force a break on downstream users. Like I mentioned, `Option` isn't used in the spec so I don't think it'll be *that* annoying. I think it's nicer than quietly having two different union implementations or quietly breaking the existing `Option` impl.
### Crate Publish Ordering
I've modified the order in which CI publishes crates to ensure that we don't publish a crate without ensuring we already published a crate that it depends upon.
## TODO
- [ ] Queue a follow-up `[patch]`-removing PR.
## Issue Addressed
NA
## Proposed Changes
Adds the ability to verify batches of aggregated/unaggregated attestations from the network.
When the `BeaconProcessor` finds there are messages in the aggregated or unaggregated attestation queues, it will first check the length of the queue:
- `== 1` verify the attestation individually.
- `>= 2` take up to 64 of those attestations and verify them in a batch.
Notably, we only perform batch verification if the queue has a backlog. We don't apply any artificial delays to attestations to try and force them into batches.
### Batching Details
To assist with implementing batches we modify `beacon_chain::attestation_verification` to have two distinct categories for attestations:
- *Indexed* attestations: those which have passed initial validation and were valid enough for us to derive an `IndexedAttestation`.
- *Verified* attestations: those attestations which were indexed *and also* passed signature verification. These are well-formed, interesting messages which were signed by validators.
The batching functions accept `n` attestations and then return `n` attestation verification `Result`s, where those `Result`s can be any combination of `Ok` or `Err`. In other words, we attempt to verify as many attestations as possible and return specific per-attestation results so peer scores can be updated, if required.
When we batch verify attestations, we first try to map all those attestations to *indexed* attestations. If any of those attestations were able to be indexed, we then perform batch BLS verification on those indexed attestations. If the batch verification succeeds, we convert them into *verified* attestations, disabling individual signature checking. If the batch fails, we convert to verified attestations with individual signature checking enabled.
Ultimately, we optimistically try to do a batch verification of attestation signatures and fall-back to individual verification if it fails. This opens an attach vector for "poisoning" the attestations and causing us to waste a batch verification. I argue that peer scoring should do a good-enough job of defending against this and the typical-case gains massively outweigh the worst-case losses.
## Additional Info
Before this PR, attestation verification took the attestations by value (instead of by reference). It turns out that this was unnecessary and, in my opinion, resulted in some undesirable ergonomics (e.g., we had to pass the attestation back in the `Err` variant to avoid clones). In this PR I've modified attestation verification so that it now takes a reference.
I refactored the `beacon_chain/tests/attestation_verification.rs` tests so they use a builder-esque "tester" struct instead of a weird macro. It made it easier for me to test individual/batch with the same set of tests and I think it was a nice tidy-up. Notably, I did this last to try and make sure my new refactors to *actual* production code would pass under the existing test suite.
## Issue Addressed
Closes#1891Closes#1784
## Proposed Changes
Implement checkpoint sync for Lighthouse, enabling it to start from a weak subjectivity checkpoint.
## Additional Info
- [x] Return unavailable status for out-of-range blocks requested by peers (#2561)
- [x] Implement sync daemon for fetching historical blocks (#2561)
- [x] Verify chain hashes (either in `historical_blocks.rs` or the calling module)
- [x] Consistency check for initial block + state
- [x] Fetch the initial state and block from a beacon node HTTP endpoint
- [x] Don't crash fetching beacon states by slot from the API
- [x] Background service for state reconstruction, triggered by CLI flag or API call.
Considered out of scope for this PR:
- Drop the requirement to provide the `--checkpoint-block` (this would require some pretty heavy refactoring of block verification)
Co-authored-by: Diva M <divma@protonmail.com>
In previous network updates we have made our libp2p connections more lean by limiting the maximum number of connections a lighthouse node will accept before libp2p rejects new connections.
However, we still maintain the logic that at maximum connections, we try to dial extra peers if they are needed by a validator client to publish messages on a specific subnet. The dials typically result in failures due the libp2p connection limits.
This PR adds an extra factor, `PRIORITY_PEER_EXCESS` which sets aside a new allocation of peers we are able to dial in case we need these peers for the VC client. This allocation sits along side the excess peer (which allows extra incoming peers on top of our target peer limit).
The drawback here, is that libp2p now allows extra peers to connect to us (beyond the standard peer limit) which the peer manager should subsequently reject.
This PR in general improves the handling around peer banning.
Specifically there were issues when multiple peers under a single IP connected to us after we banned the IP for poor behaviour.
This PR should now handle these peers gracefully as well as make some improvements around how we previously disconnected and banned peers.
The logic now goes as follows:
- Once a peer gets banned, its gets registered with its known IP addresses
- Once enough banned peers exist under a single IP that IP is banned
- We retain connections with existing peers under this IP
- Any new connections under this IP are rejected
## Issue Addressed
N/A
## Proposed Changes
Add a fork_digest to `ForkContext` only if it is set in the config.
Reject gossip messages on post fork topics before the fork happens.
Edit: Instead of rejecting gossip messages on post fork topics, we now subscribe to post fork topics 2 slots before the fork.
Co-authored-by: Age Manning <Age@AgeManning.com>
# Description
A few changes have been made to discovery. In particular a custom re-write of an LRU cache which previously was read/write O(N) for all our sessions ~5k, to a more reasonable hashmap-style O(1).
Further there has been reported issues in the current discv5, so added error handling to help identify the issue has been added.
The identify network debug logs can get quite noisy and are unnecessary to print on every request/response.
This PR reduces debug noise by only printing messages for identify messages that offer some new information.
## Proposed Changes
Cache the total active balance for the current epoch in the `BeaconState`. Computing this value takes around 1ms, and this was negatively impacting block processing times on Prater, particularly when reconstructing states.
With a large number of attestations in each block, I saw the `process_attestations` function taking 150ms, which means that reconstructing hot states can take up to 4.65s (31 * 150ms), and reconstructing freezer states can take up to 307s (2047 * 150ms).
I opted to add the cache to the beacon state rather than computing the total active balance at the start of state processing and threading it through. Although this would be simpler in a way, it would waste time, particularly during block replay, as the total active balance doesn't change for the duration of an epoch. So we save ~32ms for hot states, and up to 8.1s for freezer states (using `--slots-per-restore-point 8192`).
## Issue Addressed
Related to: #2259
Made an attempt at all the necessary updates here to publish the crates to crates.io. I incremented the minor versions on all the crates that have been previously published. We still might run into some issues as we try to publish because I'm not able to test this out but I think it's a good starting point.
## Proposed Changes
- Add description and license to `ssz_types` and `serde_util`
- rename `serde_util` to `eth2_serde_util`
- increment minor versions
- remove path dependencies
- remove patch dependencies
## Additional Info
Crates published:
- [x] `tree_hash` -- need to publish `tree_hash_derive` and `eth2_hashing` first
- [x] `eth2_ssz_types` -- need to publish `eth2_serde_util` first
- [x] `tree_hash_derive`
- [x] `eth2_ssz`
- [x] `eth2_ssz_derive`
- [x] `eth2_serde_util`
- [x] `eth2_hashing`
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Add functionality in the validator monitor to provide sync committee related metrics for monitored validators.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Missed head votes on attestations is a well-known issue. The primary cause is a block getting set as the head *after* the attestation deadline.
This PR aims to shorten the overall time between "block received" and "block set as head" by:
1. Persisting the head and fork choice *after* setting the canonical head
- Informal measurements show this takes ~200ms
1. Pruning the op pool *after* setting the canonical head.
1. No longer persisting the op pool to disk during `BeaconChain::fork_choice`
- Informal measurements show this can take up to 1.2s.
I also add some metrics to help measure the effect of these changes.
Persistence changes like this run the risk of breaking assumptions downstream. However, I have considered these risks and I think we're fine here. I will describe my reasoning for each change.
## Reasoning
### Change 1: Persisting the head and fork choice *after* setting the canonical head
For (1), although the function is called `persist_head_and_fork_choice`, it only persists:
- Fork choice
- Head tracker
- Genesis block root
Since `BeaconChain::fork_choice_internal` does not modify these values between the original time we were persisting it and the current time, I assert that the change I've made is non-substantial in terms of what ends up on-disk. There's the possibility that some *other* thread has modified fork choice in the extra time we've given it, but that's totally fine.
Since the only time we *read* those values from disk is during startup, I assert that this has no impact during runtime.
### Change 2: Pruning the op pool after setting the canonical head
Similar to the argument above, we don't modify the op pool during `BeaconChain::fork_choice_internal` so it shouldn't matter when we prune. This change should be non-substantial.
### Change 3: No longer persisting the op pool to disk during `BeaconChain::fork_choice`
This change *is* substantial. With the proposed changes, we'll only be persisting the op pool to disk when we shut down cleanly (i.e., the `BeaconChain` gets dropped). This means we'll save disk IO and time during usual operation, but a `kill -9` or similar "crash" will probably result in an out-of-date op pool when we reboot. An out-of-date op pool can only have an impact when producing blocks or aggregate attestations/sync committees.
I think it's pretty reasonable that a crash might result in an out-of-date op pool, since:
- Crashes are fairly rare. Practically the only time I see LH suffer a full crash is when the OOM killer shows up, and that's a very serious event.
- It's generally quite rare to produce a block/aggregate immediately after a reboot. Just a few slots of runtime is probably enough to have a decent-enough op pool again.
## Additional Info
Credits to @macladson for the timings referenced here.
## Issue Addressed
Resolves#2033
## Proposed Changes
Adds a flag to enable shutting down beacon node right after sync is completed.
## Additional Info
Will need modification after weak subjectivity sync is enabled to change definition of a fully synced node.
## Issue Addressed
Closes#2526
## Proposed Changes
If the head block fails to decode on start up, do two things:
1. Revert all blocks between the head and the most recent hard fork (to `fork_slot - 1`).
2. Reset fork choice so that it contains the new head, and all blocks back to the new head's finalized checkpoint.
## Additional Info
I tweaked some of the beacon chain test harness stuff in order to make it generic enough to test with a non-zero slot clock on start-up. In the process I consolidated all the various `new_` methods into a single generic one which will hopefully serve all future uses 🤞
## Issue Addressed
Resolves#2114
Swapped out the ctrlc crate for tokio signals to hook register handlers for SIGPIPE and SIGHUP along with SIGTERM and SIGINT.
## Proposed Changes
- Swap out the ctrlc crate for tokio signals for unix signal handing
- Register signals for SIGPIPE and SHIGUP that trigger the same shutdown procedure as SIGTERM and SIGINT
## Additional Info
I tested these changes against the examples in the original issue and noticed some interesting behavior on my machine. When running `lighthouse bn --network pyrmont |& tee -a pyrmont_bn.log` or `lighthouse bn --network pyrmont 2>&1 | tee -a pyrmont_bn.log` none of the above signals are sent to the lighthouse program in a way I was able to observe.
The only time it seems that the signal gets sent to the lighthouse program is if there is no redirection of stderr to stdout. I'm not as familiar with the details of how unix signals work in linux with a redirect like that so I'm not sure if this is a bug in the program or expected behavior.
Signals are correctly received without the redirection and if the above signals are sent directly to the program with something like `kill`.
## Issue Addressed
Resolves#2487
## Proposed Changes
Logs a message once in every invocation of `Eth1Service::update` method if the primary endpoint is unavailable for some reason.
e.g.
```log
Aug 03 00:09:53.517 WARN Error connecting to eth1 node endpoint action: trying fallbacks, endpoint: http://localhost:8545/, service: eth1_rpc
Aug 03 00:09:56.959 INFO Fetched data from fallback fallback_number: 1, service: eth1_rpc
```
The main aim of this PR is to have an accompanying message to the "action: trying fallbacks" error message that is returned when checking the endpoint for liveness. This is mainly to indicate to the user that the fallback was live and reachable.
## Additional info
This PR is not meant to be a catch all for all cases where the primary endpoint failed. For instance, this won't log anything if the primary node was working fine during endpoint liveness checking and failed during deposit/block fetching. This is done intentionally to reduce number of logs while initial deposit/block sync and to avoid more complicated logic.
## Issue Addressed
NA
## Proposed Changes
This PR expands the time that entries exist in the gossip-sub duplicate cache. Recent investigations found that this cache is one slot (12s) shorter than the period for which an attestation is permitted to propagate on the gossip network.
Before #2540, this was causing peers to be unnecessarily down-scored for sending old attestations. Although that issue has been fixed, the duplicate cache time is increased here to avoid such messages from getting any further up the networking stack then required.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
A Discord user presented logs which indicated a drop in their peer count caused by a variety of peers sending attestations where we'd already seen an attestation for that validator. It's presently unclear how this case came about, but during our investigation I noticed that we are down-voting peers for sending such attestations.
There are three scenarios where we may receive duplicate unagg. attestations from the same validator:
1. The validator is committing a slashable offense.
2. The gossipsub message-deduping functionality is not working as expected.
3. We received the message via the HTTP prior to seeing it via gossip.
Scenario (1) would be so costly for an attacker that I don't think we need to add DoS protection for it.
Scenario (2) seems feasible. Our "seen message" caches in gossipsub might fill up/expire and let through these duplicates. There are also cases involving message ID mismatches with the other peers. In both these cases, I don't think we should be doing 1 attestation == -1 point down-voting.
Scenario (3) is not necessarily a fault of the peer and we shouldn't down-score them for it.
## Additional Info
NA
Due to the altair fork, in principle we can now subscribe to up to 148 topics. This bypasses our original limit and we can end up rejecting subscriptions.
This PR increases the limit to account for the fork.
## Issue Addressed
N/A
## Proposed Changes
Adds a cli option to disable packet filter in `lighthouse bootnode`. This is useful in running local testnets as the bootnode bans requests from the same ip(localhost) if the packet filter is enabled.
## Issue Addressed
Resolves#2524
## Proposed Changes
- Return all known forks in the `/config/fork_schedule`, previously returned only the head of the chain's fork.
- Deleted the `StateId::head` method because it was only previously used in this endpoint.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Refactor discovery queries such that only `QueryType::Subnet` queries are queued for grouping. `QueryType::FindPeers` is always made regardless of the number of active `Subnet` queries (max = 2). This prevents `FindPeers` queries from getting starved if `Subnet` queries start queuing up.
Also removes `GroupedQueryType` struct and use `QueryType` for all queuing and processing of discovery requests.
## Additional Info
Currently, no distinction is made between subnet discovery queries for attestation and sync committee subnets when grouping queries. Potentially we could prioritise attestation queries over sync committee queries in the future.
## Issue Addressed
NA
## Proposed Changes
- Version bump
- Increase queue sizes for aggregated attestations and re-queued attestations.
## Additional Info
NA
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
- Add a counter metric to log when a block is received late from gossip.
- Also push a `DEBG` log for the above condition.
- Use Debug (`?`) instead of Display (`%`) for a bunch of logs in the beacon processor, so we don't have to deal with concatenated block roots.
- Add new ERRO and CRIT to HTTP API to alert users when they're publishing late blocks.
## Additional Info
NA
## Proposed Changes
* Consolidate Tokio versions: everything now uses the latest v1.10.0, no more `tokio-compat`.
* Many semver-compatible changes via `cargo update`. Notably this upgrades from the yanked v0.8.0 version of crossbeam-deque which is present in v1.5.0-rc.0
* Many semver incompatible upgrades via `cargo upgrades` and `cargo upgrade --workspace pkg_name`. Notable ommissions:
- Prometheus, to be handled separately: https://github.com/sigp/lighthouse/issues/2485
- `rand`, `rand_xorshift`: the libsecp256k1 package requires 0.7.x, so we'll stick with that for now
- `ethereum-types` is pinned at 0.11.0 because that's what `web3` is using and it seems nice to have just a single version
## Additional Info
We still have two versions of `libp2p-core` due to `discv5` depending on the v0.29.0 release rather than `master`. AFAIK it should be OK to release in this state (cc @AgeManning )
## Issue Addressed
NA
## Proposed Changes
- Bump to `v1.5.0-rc.0`.
- Increase attestation reprocessing queue size (I saw this filling up on Prater).
- Reduce error log for full attn reprocessing queue to warn.
## TODO
- [x] Manual testing
- [x] Resolve https://github.com/sigp/lighthouse/pull/2493
- [x] Include https://github.com/sigp/lighthouse/pull/2501
## Issue Addressed
- Resolves#2457
- Resolves#2443
## Proposed Changes
Target the (presently unreleased) head of `libp2p/rust-libp2p:master` in order to obtain the fix from https://github.com/libp2p/rust-libp2p/pull/2175.
Additionally:
- `libsecp256k1` needed to be upgraded to satisfy the new version of `libp2p`.
- There were also a handful of minor changes to `eth2_libp2p` to suit some interface changes.
- Two `cargo audit --ignore` flags were remove due to libp2p upgrades.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
When testing our (not-yet-released) Doppelganger implementation, I noticed that we aren't detecting attestations included in blocks (only those on the gossip network).
This is because during [block processing](e8c0d1f19b/beacon_node/beacon_chain/src/beacon_chain.rs (L2168)) we only update the `observed_attestations` cache with each attestation, but not the `observed_attesters` cache. This is the correct behaviour when we consider the [p2p spec](https://github.com/ethereum/eth2.0-specs/blob/v1.0.1/specs/phase0/p2p-interface.md):
> [IGNORE] There has been no other valid attestation seen on an attestation subnet that has an identical attestation.data.target.epoch and participating validator index.
We're doing the right thing here and still allowing attestations on gossip that we've seen in a block. However, this doesn't work so nicely for Doppelganger.
To resolve this, I've taken the following steps:
- Add a `observed_block_attesters` cache.
- Rename `observed_attesters` to `observed_gossip_attesters`.
## TODO
- [x] Add a test to ensure a validator that's been seen in a block attestation (but not a gossip attestation) returns `true` for `BeaconChain::validator_seen_at_epoch`.
- [x] Add a test to ensure `observed_block_attesters` isn't polluted via gossip attestations and vice versa.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
* Implement the validator client and HTTP API changes necessary to support Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
- Removing a bunch of unnecessary references
- Updated `Error::VariantError` to `Error::Variant`
- There were additional enum variant lints that I ignored, because I thought our variant names were fine
- removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
- Resolves#2169
## Proposed Changes
Adds the `AttesterCache` to allow validators to produce attestations for older slots. Presently, some arbitrary restrictions can force validators to receive an error when attesting to a slot earlier than the present one. This can cause attestation misses when there is excessive load on the validator client or time sync issues between the VC and BN.
## Additional Info
NA
## Proposed Changes
Add the `sync_aggregate` from `BeaconBlock` to the bulk signature verifier for blocks. This necessitates a new signature set constructor for the sync aggregate, which is different from the others due to the use of [`eth2_fast_aggregate_verify`](https://github.com/ethereum/eth2.0-specs/blob/v1.1.0-alpha.7/specs/altair/bls.md#eth2_fast_aggregate_verify) for sync aggregates, per [`process_sync_aggregate`](https://github.com/ethereum/eth2.0-specs/blob/v1.1.0-alpha.7/specs/altair/beacon-chain.md#sync-aggregate-processing). I made the choice to return an optional signature set, with `None` representing the case where the signature is valid on account of being the point at infinity (requires no further checking).
To "dogfood" the changes and prevent duplication, the consensus logic now uses the signature set approach as well whenever it is required to verify signatures (which should only be in testing AFAIK). The EF tests pass with the code as it exists currently, but failed before I adapted the `eth2_fast_aggregate_verify` changes (which is good).
As a result of this change Altair block processing should be a little faster, and importantly, we will no longer accidentally verify signatures when replaying blocks, e.g. when replaying blocks from the database.
## Issue Addressed
NA
## Proposed Changes
This PR addresses two things:
1. Allows the `ValidatorMonitor` to work with Altair states.
1. Optimizes `altair::process_epoch` (see [code](https://github.com/paulhauner/lighthouse/blob/participation-cache/consensus/state_processing/src/per_epoch_processing/altair/participation_cache.rs) for description)
## Breaking Changes
The breaking changes in this PR revolve around one premise:
*After the Altair fork, it's not longer possible (given only a `BeaconState`) to identify if a validator had *any* attestation included during some epoch. The best we can do is see if that validator made the "timely" source/target/head flags.*
Whilst this seems annoying, it's not actually too bad. Finalization is based upon "timely target" attestations, so that's really the most important thing. Although there's *some* value in knowing if a validator had *any* attestation included, it's far more important to know about "timely target" participation, since this is what affects finality and justification.
For simplicity and consistency, I've also removed the ability to determine if *any* attestation was included from metrics and API endpoints. Now, all Altair and non-Altair states will simply report on the head/target attestations.
The following section details where we've removed fields and provides replacement values.
### Breaking Changes: Prometheus Metrics
Some participation metrics have been removed and replaced. Some were removed since they are no longer relevant to Altair (e.g., total attesting balance) and others replaced with gwei values instead of pre-computed values. This provides more flexibility at display-time (e.g., Grafana).
The following metrics were added as replacements:
- `beacon_participation_prev_epoch_head_attesting_gwei_total`
- `beacon_participation_prev_epoch_target_attesting_gwei_total`
- `beacon_participation_prev_epoch_source_attesting_gwei_total`
- `beacon_participation_prev_epoch_active_gwei_total`
The following metrics were removed:
- `beacon_participation_prev_epoch_attester`
- instead use `beacon_participation_prev_epoch_source_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_target_attester`
- instead use `beacon_participation_prev_epoch_target_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_head_attester`
- instead use `beacon_participation_prev_epoch_head_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
The `beacon_participation_prev_epoch_attester` endpoint has been removed. Users should instead use the pre-existing `beacon_participation_prev_epoch_target_attester`.
### Breaking Changes: HTTP API
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint loses the following fields:
- `current_epoch_attesting_gwei` (use `current_epoch_target_attesting_gwei` instead)
- `previous_epoch_attesting_gwei` (use `previous_epoch_target_attesting_gwei` instead)
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint lose the following fields:
- `is_current_epoch_attester` (use `is_current_epoch_target_attester` instead)
- `is_previous_epoch_attester` (use `is_previous_epoch_target_attester` instead)
- `is_active_in_current_epoch` becomes `is_active_unslashed_in_current_epoch`.
- `is_active_in_previous_epoch` becomes `is_active_unslashed_in_previous_epoch`.
## Additional Info
NA
## TODO
- [x] Deal with total balances
- [x] Update validator_inclusion API
- [ ] Ensure `beacon_participation_prev_epoch_target_attester` and `beacon_participation_prev_epoch_head_attester` work before Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
Update to the latest version of the Altair spec, which includes new tests and a tweak to the target sync aggregators.
## Additional Info
This change is _not_ required for the imminent Altair devnet, and is waiting on the merge of #2321 to unstable.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Remove the remaining Altair `FIXME`s from consensus land.
1. Implement tree hash caching for the participation lists. This required some light type manipulation, including removing the `TreeHash` bound from `CachedTreeHash` which was purely descriptive.
2. Plumb the proposer index through Altair attestation processing, to avoid calculating it for _every_ attestation (potentially 128ms on large networks). This duplicates some work from #2431, but with the aim of getting it in sooner, particularly for the Altair devnets.
3. Removes two FIXMEs related to `superstruct` and cloning, which are unlikely to be particularly detrimental and will be tracked here instead: https://github.com/sigp/superstruct/issues/5
* Adjust beacon node timeouts for validator client HTTP requests (#2352)
Resolves#2313
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Use read_recursive locks in database (#2417)
Closes#2245
Replace all calls to `RwLock::read` in the `store` crate with `RwLock::read_recursive`.
* Unfortunately we can't run the deadlock detector on CI because it's pinned to an old Rust 1.51.0 nightly which cannot compile Lighthouse (one of our deps uses `ptr::addr_of!` which is too new). A fun side-project at some point might be to update the deadlock detector.
* The reason I think we haven't seen this deadlock (at all?) in practice is that _writes_ to the database's split point are quite infrequent, and a concurrent write is required to trigger the deadlock. The split point is only written when finalization advances, which is once per epoch (every ~6 minutes), and state reads are also quite sporadic. Perhaps we've just been incredibly lucky, or there's something about the timing of state reads vs database migration that protects us.
* I wrote a few small programs to demo the deadlock, and the effectiveness of the `read_recursive` fix: https://github.com/michaelsproul/relock_deadlock_mvp
* [The docs for `read_recursive`](https://docs.rs/lock_api/0.4.2/lock_api/struct.RwLock.html#method.read_recursive) warn of starvation for writers. I think in order for starvation to occur the database would have to be spammed with so many state reads that it's unable to ever clear them all and find time for a write, in which case migration of states to the freezer would cease. If an attack could be performed to trigger this starvation then it would likely trigger a deadlock in the current code, and I think ceasing migration is preferable to deadlocking in this extreme situation. In practice neither should occur due to protection from spammy peers at the network layer. Nevertheless, it would be prudent to run this change on the testnet nodes to check that it doesn't cause accidental starvation.
* Return more detail when invalid data is found in the DB during startup (#2445)
- Resolves#2444
Adds some more detail to the error message returned when the `BeaconChainBuilder` is unable to access or decode block/state objects during startup.
NA
* Use hardware acceleration for SHA256 (#2426)
Modify the SHA256 implementation in `eth2_hashing` so that it switches between `ring` and `sha2` to take advantage of [x86_64 SHA extensions](https://en.wikipedia.org/wiki/Intel_SHA_extensions). The extensions are available on modern Intel and AMD CPUs, and seem to provide a considerable speed-up: on my Ryzen 5950X it dropped state tree hashing times by about 30% from 35ms to 25ms (on Prater).
The extensions became available in the `sha2` crate [last year](https://www.reddit.com/r/rust/comments/hf2vcx/ann_rustcryptos_sha1_and_sha2_now_support/), and are not available in Ring, which uses a [pure Rust implementation of sha2](https://github.com/briansmith/ring/blob/main/src/digest/sha2.rs). Ring is faster on CPUs that lack the extensions so I've implemented a runtime switch to use `sha2` only when the extensions are available. The runtime switching seems to impose a miniscule penalty (see the benchmarks linked below).
* Start a release checklist (#2270)
NA
Add a checklist to the release draft created by CI. I know @michaelsproul was also working on this and I suspect @realbigsean also might have useful input.
NA
* Serious banning
* fmt
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
- Resolves#2452
## Proposed Changes
I've seen a few people confused by this and I don't think the message is really worth it.
## Additional Info
NA
## Issue Addressed
#635
## Proposed Changes
- Keep attestations that reference a block we have not seen for 30secs before being re processed
- If we do import the block before that time elapses, it is reprocessed in that moment
- The first time it fails, do nothing wrt to gossipsub propagation or peer downscoring. If after being re processed it fails, downscore with a `LowToleranceError` and ignore the message.
## Issue Addressed
NA
## Proposed Changes
Adds a metric to see how many set bits are in the sync aggregate for each beacon block being imported.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds more detail to the log when an attestation is ignored due to a prior one being known. This will help identify which validators are causing the issue.
## Additional Info
NA
## Issue Addressed
- Resolves#2444
## Proposed Changes
Adds some more detail to the error message returned when the `BeaconChainBuilder` is unable to access or decode block/state objects during startup.
## Additional Info
NA
## Issue Addressed
Closes#2245
## Proposed Changes
Replace all calls to `RwLock::read` in the `store` crate with `RwLock::read_recursive`.
## Additional Info
* Unfortunately we can't run the deadlock detector on CI because it's pinned to an old Rust 1.51.0 nightly which cannot compile Lighthouse (one of our deps uses `ptr::addr_of!` which is too new). A fun side-project at some point might be to update the deadlock detector.
* The reason I think we haven't seen this deadlock (at all?) in practice is that _writes_ to the database's split point are quite infrequent, and a concurrent write is required to trigger the deadlock. The split point is only written when finalization advances, which is once per epoch (every ~6 minutes), and state reads are also quite sporadic. Perhaps we've just been incredibly lucky, or there's something about the timing of state reads vs database migration that protects us.
* I wrote a few small programs to demo the deadlock, and the effectiveness of the `read_recursive` fix: https://github.com/michaelsproul/relock_deadlock_mvp
* [The docs for `read_recursive`](https://docs.rs/lock_api/0.4.2/lock_api/struct.RwLock.html#method.read_recursive) warn of starvation for writers. I think in order for starvation to occur the database would have to be spammed with so many state reads that it's unable to ever clear them all and find time for a write, in which case migration of states to the freezer would cease. If an attack could be performed to trigger this starvation then it would likely trigger a deadlock in the current code, and I think ceasing migration is preferable to deadlocking in this extreme situation. In practice neither should occur due to protection from spammy peers at the network layer. Nevertheless, it would be prudent to run this change on the testnet nodes to check that it doesn't cause accidental starvation.
## Issue Addressed
Resolves#2313
## Proposed Changes
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
## Additional Info
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#2377
## Proposed Changes
Implement the same code used for block root lookups (from #2376) to state root lookups in order to improve performance and reduce associated memory spikes (e.g. from certain HTTP API requests).
## Additional Changes
- Tests using `rev_iter_state_roots` and `rev_iter_block_roots` have been refactored to use their `forwards` versions instead.
- The `rev_iter_state_roots` and `rev_iter_block_roots` functions are now unused and have been removed.
- The `state_at_slot` function has been changed to use the `forwards` iterator.
## Additional Info
- Some tests still need to be refactored to use their `forwards_iter` versions. These tests start their iteration from a specific beacon state and thus use the `rev_iter_state_roots_from` and `rev_iter_block_roots_from` functions. If they can be refactored, those functions can also be removed.
This updates some older dependencies to address a few cargo audit warnings.
The majority of warnings come from network dependencies which will be addressed in #2389.
This PR contains some minor dep updates that are not network related.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
A user on Discord (`@ChewsMacRibs`) reported that the validator monitor was logging `WARN Attested to an incorrect head` for their validator while it was awaiting activation.
This PR modifies the monitor so that it ignores inactive validators, by the logic that they are either awaiting activation, or have already exited. Either way, there's no way for an inactive validator to have their attestations included on chain, so no need for the monitor to report on them.
## Additional Info
To reproduce the bug requires registering validator keys manually with `--validator-monitor-pubkeys`. I don't think the bug will present itself with `--validator-monitor-auto`.
## Issue Addressed
#2293
## Proposed Changes
- Modify the handler for the `eth_chainId` RPC (i.e., `get_chain_id`) to explicitly match against the Geth error string returned for pre-EIP-155 synced Geth nodes
- ~~Add a new helper function, `rpc_error_msg`, to aid in the above point~~
- Refactor `response_result` into `response_result_or_error` and patch reliant RPC handlers accordingly (thanks to @pawanjay176)
## Additional Info
Geth, as of Pangaea Expanse (v1.10.0), returns an explicit error when it is not synced past the EIP-155 block (2675000). Previously, Geth simply returned a chain ID of 0 (which was obviously much easier to handle on Lighthouse's part).
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
I am starting to see a lot of slog-async overflows (i.e., too many logs) on Prater whenever we see attestations for an unknown block. Since these logs are identical (except for peer id) and we expose volume/count of these errors via `metrics::GOSSIP_ATTESTATION_ERRORS_PER_TYPE`, I took the following actions to remove them from `DEBUG` logs:
- Push the "Attestation for unknown block" log to trace.
- Add a debug log in `search_for_block`. In effect, this should serve as a de-duped version of the previous, downgraded log.
## Additional Info
TBC
## Issue Addressed
NA
## Proposed Changes
Bump versions.
## Additional Info
This is not exactly the v1.4.0 release described in [Lighthouse Update #36](https://lighthouse.sigmaprime.io/update-36.html).
Whilst it contains:
- Beta Windows support
- A reduction in Eth1 queries
- A reduction in memory footprint
It does not contain:
- Altair
- Doppelganger Protection
- The remote signer
We have decided to release some features early. This is primarily due to the desire to allow users to benefit from the memory saving improvements as soon as possible.
## TODO
- [x] Wait for #2340, #2356 and #2376 to merge and then rebase on `unstable`.
- [x] Ensure discovery issues are fixed (see #2388)
- [x] Ensure https://github.com/sigp/lighthouse/pull/2382 is merged/removed.
- [x] Ensure https://github.com/sigp/lighthouse/pull/2383 is merged/removed.
- [x] Ensure https://github.com/sigp/lighthouse/pull/2384 is merged/removed.
- [ ] Double-check eth1 cache is carried between boots
## Issue Addressed
NA
## Proposed Changes
Reverts #2345 in the interests of getting v1.4.0 out this week. Once we have released that, we can go back to testing this again.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
When observing `jemallocator` heap profiles and Grafana, it became clear that Lighthouse is spending significant RAM/CPU on processing blocks from the RPC. On investigation, it seems that we are loading the parent of the block *before* we check to see if the block is already known. This is a big waste of resources.
This PR adds an additional `check_block_relevancy` call as the first thing we do when we try to process a `SignedBeaconBlock` via the RPC (or other similar methods). Ultimately, `check_block_relevancy` will be called again later in the block processing flow. It's a very light function and I don't think trying to optimize it out is worth the risk of a bad block slipping through.
Also adds a `New RPC block received` info log when we process a new RPC block. This seems like interesting and infrequent info.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Return a very specific error when at attestation reads shuffling from a frozen `BeaconState`. Previously, this was returning `MissingBeaconState` which indicates a much more serious issue.
## Additional Info
Since `get_inconsistent_state_for_attestation_verification_only` is only called once in `BeaconChain::with_committee_cache`, it is quite easy to reason about the impact of this change.
## Issue Addressed
NA
## Proposed Changes
Whilst investigating #2372, I [learned](https://github.com/sigp/lighthouse/issues/2372#issuecomment-851725049) that the error message returned from some failed Eth1 requests are always `NotReachable`. This makes debugging quite painful.
This PR adds more detail to these errors. For example:
- Bad infura key: `ERRO Failed to update eth1 cache error: Failed to update Eth1 service: "All fallback errored: https://mainnet.infura.io/ => EndpointError(RequestFailed(\"Response HTTP status was not 200 OK: 401 Unauthorized.\"))", retry_millis: 60000, service: eth1_rpc`
- Unreachable server: `ERRO Failed to update eth1 cache error: Failed to update Eth1 service: "All fallback errored: http://127.0.0.1:8545/ => EndpointError(RequestFailed(\"Request failed: reqwest::Error { kind: Request, url: Url { scheme: \\\"http\\\", cannot_be_a_base: false, username: \\\"\\\", password: None, host: Some(Ipv4(127.0.0.1)), port: Some(8545), path: \\\"/\\\", query: None, fragment: None }, source: hyper::Error(Connect, ConnectError(\\\"tcp connect error\\\", Os { code: 111, kind: ConnectionRefused, message: \\\"Connection refused\\\" })) }\"))", retry_millis: 60000, service: eth1_rpc`
- Bad server: `ERRO Failed to update eth1 cache error: Failed to update Eth1 service: "All fallback errored: http://127.0.0.1:8545/ => EndpointError(RequestFailed(\"Response HTTP status was not 200 OK: 501 Not Implemented.\"))", retry_millis: 60000, service: eth1_rpc`
## Additional Info
NA
## Issue Addressed
NA
## Primary Change
When investigating memory usage, I noticed that retrieving a block from an early slot (e.g., slot 900) would cause a sharp increase in the memory footprint (from 400mb to 800mb+) which seemed to be ever-lasting.
After some investigation, I found that the reverse iteration from the head back to that slot was the likely culprit. To counter this, I've switched the `BeaconChain::block_root_at_slot` to use the forwards iterator, instead of the reverse one.
I also noticed that the networking stack is using `BeaconChain::root_at_slot` to check if a peer is relevant (`check_peer_relevance`). Perhaps the steep, seemingly-random-but-consistent increases in memory usage are caused by the use of this function.
Using the forwards iterator with the HTTP API alleviated the sharp increases in memory usage. It also made the response much faster (before it felt like to took 1-2s, now it feels instant).
## Additional Changes
In the process I also noticed that we have two functions for getting block roots:
- `BeaconChain::block_root_at_slot`: returns `None` for a skip slot.
- `BeaconChain::root_at_slot`: returns the previous root for a skip slot.
I unified these two functions into `block_root_at_slot` and added the `WhenSlotSkipped` enum. Now, the caller must be explicit about the skip-slot behaviour when requesting a root.
Additionally, I replaced `vec![]` with `Vec::with_capacity` in `store::chunked_vector::range_query`. I stumbled across this whilst debugging and made this modification to see what effect it would have (not much). It seems like a decent change to keep around, but I'm not concerned either way.
Also, `BeaconChain::get_ancestor_block_root` is unused, so I got rid of it 🗑️.
## Additional Info
I haven't also done the same for state roots here. Whilst it's possible and a good idea, it's more work since the fwds iterators are presently block-roots-specific.
Whilst there's a few places a reverse iteration of state roots could be triggered (e.g., attestation production, HTTP API), they're no where near as common as the `check_peer_relevance` call. As such, I think we should get this PR merged first, then come back for the state root iters. I made an issue here https://github.com/sigp/lighthouse/issues/2377.
## Issue Addressed
#2325
## Proposed Changes
This pull request changes the behavior of the Peer Manager by including a minimum outbound-only peers requirement. The peer manager will continue querying for peers if this outbound-only target number hasn't been met. Additionally, when peers are being removed, an outbound-only peer will not be disconnected if doing so brings us below the minimum.
## Additional Info
Unit test for heartbeat function tests that disconnection behavior is correct. Continual querying for peers if outbound-only hasn't been met is not directly tested, but indirectly through unit testing of the helper function that counts the number of outbound-only peers.
EDIT: Am concerned about the behavior of ```update_peer_scores```. If we have connected to a peer with a score below the disconnection threshold (-20), then its connection status will remain connected, while its score state will change to disconnected.
```rust
let previous_state = info.score_state();
// Update scores
info.score_update();
Self::handle_score_transitions(
previous_state,
peer_id,
info,
&mut to_ban_peers,
&mut to_unban_peers,
&mut self.events,
&self.log,
);
```
```previous_state``` will be set to Disconnected, and then because ```handle_score_transitions``` only changes connection status for a peer if the state changed, the peer remains connected. Then in the heartbeat code, because we only disconnect healthy peers if we have too many peers, these peers don't get disconnected. I'm not sure realistically how often this scenario would occur, but it might be better to adjust the logic to account for scenarios where the score state implies a connection status different from the current connection status.
Co-authored-by: Kevin Lu <kevlu93@gmail.com>
## Issue Addressed
#2282
## Proposed Changes
Reduce the outbound requests made to eth1 endpoints by caching the results from `eth_chainId` and `net_version`.
Further reduce the overall request count by increasing `auto_update_interval_millis` from `7_000` (7 seconds) to `60_000` (1 minute).
This will result in a reduction from ~2000 requests per hour to 360 requests per hour (during normal operation). A reduction of 82%.
## Additional Info
If an endpoint fails, its state is dropped from the cache and the `eth_chainId` and `net_version` calls will be made for that endpoint again during the regular update cycle (once per minute) until it is back online.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
The ordering of adding new peers to the peerdb and deciding when to dial them was not considered in a previous update.
This adds the condition that if a peer is not in the peer-db then it is an acceptable peer to dial.
This makes #2374 obsolete.
## Issue Addressed
NA
## Proposed Changes
Modify the configuration of [GNU malloc](https://www.gnu.org/software/libc/manual/html_node/The-GNU-Allocator.html) to reduce memory footprint.
- Set `M_ARENA_MAX` to 4.
- This reduces memory fragmentation at the cost of contention between threads.
- Set `M_MMAP_THRESHOLD` to 2mb
- This means that any allocation >= 2mb is allocated via an anonymous mmap, instead of on the heap/arena. This reduces memory fragmentation since we don't need to keep growing the heap to find big contiguous slabs of free memory.
- ~~Run `malloc_trim` every 60 seconds.~~
- ~~This shaves unused memory from the top of the heap, preventing the heap from constantly growing.~~
- Removed, see: https://github.com/sigp/lighthouse/pull/2299#issuecomment-825322646
*Note: this only provides memory savings on the Linux (glibc) platform.*
## Additional Info
I'm going to close#2288 in favor of this for the following reasons:
- I've managed to get the memory footprint *smaller* here than with jemalloc.
- This PR seems to be less of a dramatic change than bringing in the jemalloc dep.
- The changes in this PR are strictly runtime changes, so we can create CLI flags which disable them completely. Since this change is wide-reaching and complex, it's nice to have an easy "escape hatch" if there are undesired consequences.
## TODO
- [x] Allow configuration via CLI flags
- [x] Test on Mac
- [x] Test on RasPi.
- [x] Determine if GNU malloc is present?
- I'm not quite sure how to detect for glibc.. This issue suggests we can't really: https://github.com/rust-lang/rust/issues/33244
- [x] Make a clear argument regarding the affect of this on CPU utilization.
- [x] Test with higher `M_ARENA_MAX` values.
- [x] Test with longer trim intervals
- [x] Add some stats about memory savings
- [x] Remove `malloc_trim` calls & code
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
The latest version of Rust has new clippy rules & the codebase isn't up to date with them.
## Proposed Changes
Small formatting changes that clippy tells me are functionally equivalent
## Issue Addressed
N/A
## Proposed Changes
Add unit tests for the various CLI flags associated with the beacon node and validator client. These changes require the addition of two new flags: `dump-config` and `immediate-shutdown`.
## Additional Info
Both `dump-config` and `immediate-shutdown` are marked as hidden since they should only be used in testing and other advanced use cases.
**Note:** This requires changing `main.rs` so that the flags can adjust the program behavior as necessary.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#2276
## Proposed Changes
Add the `SensitiveUrl` struct which wraps `Url` and implements custom `Display` and `Debug` traits to redact user secrets from being logged in eth1 endpoints, beacon node endpoints and metrics.
## Additional Info
This also includes a small rewrite of the eth1 crate to make requests using `Url` instead of `&str`.
Some error messages have also been changed to remove `Url` data.
## Issue Addressed
#2107
## Proposed Change
The peer manager will mark peers as disconnected in the discv5 DHT when they disconnect or dial fails
## Additional Info
Rationale for this particular change is explained in my comment on #2107
## Issue Addressed
Resolves#2186
## Proposed Changes
404 for any block-related information on a slot that was skipped or orphaned
Affected endpoints:
- `/eth/v1/beacon/blocks/{block_id}`
- `/eth/v1/beacon/blocks/{block_id}/root`
- `/eth/v1/beacon/blocks/{block_id}/attestations`
- `/eth/v1/beacon/headers/{block_id}`
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Bump versions.
## Additional Info
This is a minor release (not patch) due to the very slight change introduced by #2291.
## Proposed Changes
Use two instances of max cover when packing attestations into blocks: one for the previous epoch, and one for the current epoch. This reduces the amount of computation done by roughly half due to the `O(n^2)` running time of max cover (`2 * (n/2)^2 = n^2/2`). This should help alleviate some load on block proposal, particularly on Prater.
## Issue Addressed
NA
## Proposed Changes
- Adds a specific log and metric for when a block is enshrined as head with a delay that will caused bad attestations
- We *technically* already expose this information, but it's a little tricky to determine during debugging. This makes it nice and explicit.
- Fixes a minor reporting bug with the validator monitor where it was expecting agg. attestations too early (at half-slot rather than two-thirds-slot).
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Ensure that the [target consistency check](b356f52c5c) is always performed on aggregates.
- Add a regression test.
## Additional Info
NA
This is a small PR that cleans up compiler warnings.
The most controversial change is removing the `data_dir` field from the `BeaconChainBuilder`.
It was removed because it was never read.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Herman Junge <hermanjunge@protonmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
