Host ts-nitro example site through Caddy

Rather than always requesting a certificate, attempt to re-use an existing certificate if it already exists in the k8s cluster.  This includes matching to a wildcard certificate.

Reviewed-on: cerc-io/stack-orchestrator#779
Co-authored-by: Thomas E Lackey <telackey@bozemanpass.com>
Co-committed-by: Thomas E Lackey <telackey@bozemanpass.com>

.gitea/workflows/fixturenet-eth-plugeth-arm-test.yml

@@ -0,0 +1,45 @@
+name: Fixturenet-Eth-Plugeth-Arm-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-arm-test'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+
+jobs:
+  test:
+    name: "Run an Ethereum plugeth fixturenet test"
+    runs-on: ubuntu-latest-arm
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth-plugeth/run-test.sh

.gitea/workflows/lint.yml

@@ -0,0 +1,21 @@
+name: Lint Checks
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run linter"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name : "Run flake8"
+        uses: py-actions/flake8@v2

.gitea/workflows/test-container-registry.yml

@@ -0,0 +1,54 @@
+name: Container Registry Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-container-registry'
+      - '.gitea/workflows/test-container-registry.yml'
+      - 'tests/container-registry/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '6 19 * * *'
+
+jobs:
+  test:
+    name: "Run contaier registry hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Install ed" # Only needed until we remove the need to edit the spec file
+        run: apt update && apt install -y ed
+      - name: "Run container registry deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/container-registry/run-test.sh
+

.gitea/workflows/test-database.yml

@@ -0,0 +1,52 @@
+name: Database Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-database'
+      - '.gitea/workflows/test-database.yml'
+      - 'tests/database/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '5 18 * * *'
+
+jobs:
+  test:
+    name: "Run database hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run database deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/database/run-test.sh
+

.gitea/workflows/test-k8s-deploy.yml

@@ -1,6 +1,8 @@
 name: K8s Deploy Test
 
 on:
+  pull_request:
+    branches: '*'
   push:
     branches: '*'
     paths:

.gitea/workflows/triggers/fixturenet-eth-plugeth-arm-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-plugeth-arm-test CI job
+

.gitea/workflows/triggers/test-container-registry

@@ -0,0 +1 @@
+Change this file to trigger running the test-container-registry CI job

.gitea/workflows/triggers/test-database

@@ -0,0 +1,2 @@
+Change this file to trigger running the test-database CI job
+Trigger test run

README.md

@@ -29,10 +29,10 @@ chmod +x ~/.docker/cli-plugins/docker-compose
 Next decide on a directory where you would like to put the stack-orchestrator program. Typically this would be 
 a "user" binary directory such as `~/bin` or perhaps `/usr/local/laconic` or possibly just the current working directory.
 
-Now, having selected that directory, download the latest release from [this page](https://github.com/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
+Now, having selected that directory, download the latest release from [this page](https://git.vdb.to/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
 
 ```bash
-curl -L -o ~/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+curl -L -o ~/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 ```
 
 Give it execute permissions:
@@ -52,7 +52,7 @@ Version: 1.1.0-7a607c2-202304260513
 Save the distribution url to `~/.laconic-so/config.yml`:
 ```bash
 mkdir ~/.laconic-so
-echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml
+echo "distribution-url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so" >  ~/.laconic-so/config.yml
 ```
 
 ### Update

docs/CONTRIBUTING.md

@@ -26,7 +26,7 @@ In addition to the pre-requisites listed in the [README](/README.md), the follow
 
 1. Clone this repository:
    ```
-   $ git clone https://github.com/cerc-io/stack-orchestrator.git
+   $ git clone https://git.vdb.to/cerc-io/stack-orchestrator.git
    ```
 
 2. Enter the project directory:

docs/adding-a-new-stack.md

@@ -1,10 +1,10 @@
 # Adding a new stack
 
-See [this PR](https://github.com/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://github.com/cerc-io/stack-orchestrator/pull/435) is another good example.
+See [this PR](https://git.vdb.to/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://git.vdb.to/cerc-io/stack-orchestrator/pull/435) is another good example.
 
 For external developers, we recommend forking this repo and adding your stack directly to your fork. This initially requires running in "developer mode" as described [here](/docs/CONTRIBUTING.md). Check out the [Namada stack](https://github.com/vknowable/stack-orchestrator/blob/main/app/data/stacks/public-namada/digitalocean_quickstart.md) from Knowable to see how that is done.
 
-Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://github.com/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
+Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
 
 ## Example
 

docs/fetching-containers.md

@@ -0,0 +1,9 @@
+# Fetching pre-built container images
+When Stack Orchestrator deploys a stack containing a suite of one or more containers it expects images for those containers to be on the local machine with a tag of the form `<image-name>:local` Images for these containers can be built from source (and optionally base container images from public registries) with the `build-containers` subcommand. 
+
+However, the task of building a large number of containers from source may consume considerable time and machine resources. This is where the `fetch-containers` subcommand steps in. It is designed to work exactly like `build-containers` but instead the images, pre-built, are fetched from an image registry then re-tagged for deployment. It can be used in place of `build-containers` for any stack provided the necessary containers, built for the local machine architecture (e.g. arm64 or x86-64) have already been published in an image registry.
+## Usage
+To use `fetch-containers`, provide an image registry path, a username and token/password with read access to the registry, and optionally specify `--force-local-overwrite`. If this argument is not specified, if there is already a locally built or previously fetched image for a stack container on the machine, it will not be overwritten and a warning issued.
+```
+$ laconic-so --stack mobymask-v3-demo fetch-containers --image-registry git.vdb.to/cerc-io --registry-username <registry-user> --registry-token <registry-token> --force-local-overwrite
+```

docs/laconicd-with-console.md

@@ -15,132 +15,139 @@ To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the
 16 GB Memory / 8 Intel vCPUs / 160 GB Disk.
 
 1. Login to the droplet as root (either by SSH key or password set in the DO console)
+    ```
+    ssh root@IP
+    ```
 
-```
-ssh root@IP
-```
+1. Get the install script, give it executable permissions, and run it:
 
-2. Get the install script, give it executable permissions, and run it:
+    ```
+    curl -o install.sh https://raw.githubusercontent.com/cerc-io/stack-orchestrator/main/scripts/quick-install-linux.sh
+    ```
+    ```
+    chmod +x install.sh
+    ```
+    ```
+    bash install.sh
+    ```
 
-```
-curl -o install.sh https://raw.githubusercontent.com/cerc-io/stack-orchestrator/main/scripts/quick-install-linux.sh
-```
-```
-chmod +x install.sh
-```
-```
-bash install.sh
-```
+1. Confirm docker was installed and activate the changes in `~/.profile`:
 
-3. Confirm docker was installed and activate the changes in `~/.profile`:
+    ```
+    docker run hello-world
+   ```
+   ```
+   source ~/.profile
+   ```
 
-```
-docker run hello-world
-```
-```
-source ~/.profile
-```
+1. Verify installation:
 
-4. Verify installation:
-
-```
-laconic-so version
-```
+    ```
+    laconic-so version
+    ```
 
 ## Setup the laconic fixturenet stack
 
 1. Get the repositories
 
-```
-laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
-```
+    ```
+    laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
+    ```
 
-2. Set this environment variable to the Laconic self-hosted Gitea instance:
+1. Build the containers:
 
-```
-export CERC_NPM_REGISTRY_URL=https://git.vdb.to/api/packages/cerc-io/npm/
-```
+    ```
+    laconic-so --stack fixturenet-laconic-loaded build-containers
+    ```
 
-3. Build the containers:
+    It's possible to run into an `ESOCKETTIMEDOUT` error, e.g., `error An unexpected error occurred: "https://registry.yarnpkg.com/@material-ui/icons/-/icons-4.11.3.tgz: ESOCKETTIMEDOUT"`. This may happen even if you have a great internet connection. In that case, re-run the `build-containers` command.
 
-```
-laconic-so --stack fixturenet-laconic-loaded build-containers
-```
 
-It's possible to run into an `ESOCKETTIMEDOUT` error, e.g., `error An unexpected error occurred: "https://registry.yarnpkg.com/@material-ui/icons/-/icons-4.11.3.tgz: ESOCKETTIMEDOUT"`. This may happen even if you have a great internet connection. In that case, re-run the `build-containers` command.
+1. Set this environment variable to your droplet's IP address or fully qualified DNS host name if it has one:
 
-4. Set this environment variable to your droplet's IP address:
+    ```
+    export BACKEND_ENDPOINT=http://<your-IP-or-hostname>:9473
+    ```
+    e.g.
+    ```
+    export BACKEND_ENDPOINT=http://my-test-server.example.com:9473
+    ```
 
-```
-export LACONIC_HOSTED_ENDPOINT=http://<your-IP>
-```
+1. Create a deployment directory for the stack:
+    ```
+    laconic-so --stack fixturenet-laconic-loaded deploy init --output laconic-loaded.spec --map-ports-to-host any-same --config LACONIC_HOSTED_ENDPOINT=$BACKEND_ENDPOINT
+    ```
+    ```
+    laconic-so --stack fixturenet-laconic-loaded deploy create --deployment-dir laconic-loaded-deployment --spec-file laconic-loaded.spec
+    ```
+2. Start the stack:
 
-5. Deploy the stack:
+    ```
+    laconic-so deployment --dir laconic-loaded-deployment start
+    ```
 
-```
-laconic-so --stack fixturenet-laconic-loaded deploy up
-```
+3. Check the logs:
 
-6. Check the logs:
+    ```
+    laconic-so deployment --dir laconic-loaded-deployment logs
+    ```
 
-```
-laconic-so --stack fixturenet-laconic-loaded deploy logs
-```
+    You'll see output from `laconicd` and the block height should be >1 to confirm it is running:
 
-You'll see output from `laconicd` and the block height should be >1 to confirm it is running:
+    ```
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:29PM INF indexed block exents height=12 module=txindex server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF Timed out dur=4976.960115 height=13 module=consensus round=0 server=node step=1
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received proposal module=consensus proposal={"Type":32,"block_id":{"hash":"D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4","parts":{"hash":"22411A20B7F14CDA33244420FBDDAF24450C0628C7A06034FF22DAC3699DDCC8","total":1}},"height":13,"pol_round":-1,"round":0,"signature":"DEuqnaQmvyYbUwckttJmgKdpRu6eVm9i+9rQ1pIrV2PidkMNdWRZBLdmNghkIrUzGbW8Xd7UVJxtLRmwRASgBg==","timestamp":"2023-04-18T21:30:01.49450663Z"} server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received complete proposal block hash=D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4 height=13 module=consensus server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF finalizing commit of block hash={} height=13 module=consensus num_txs=0 root=1A8CA1AF139CCC80EC007C6321D8A63A46A793386EE2EDF9A5CA0AB2C90728B7 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF minted coins from module account amount=2059730459416582643aphoton from=mint module=x/bank
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF executed block height=13 module=state num_invalid_txs=0 num_valid_txs=0 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF commit synced commit=436F6D6D697449447B5B363520313037203630203232372039352038352032303820313334203231392032303520313433203130372031343920313431203139203139322038362031323720362031383520323533203137362031333820313735203135392031383620323334203135382031323120313431203230342037335D3A447D
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF committed state app_hash=416B3CE35F55D086DBCD8F6B958D13C0567F06B9FDB08AAF9FBAEA9E798DCC49 height=13 module=state num_txs=0 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF indexed block exents height=13 module=txindex server=node
+    ```
 
-```
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:29PM INF indexed block exents height=12 module=txindex server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF Timed out dur=4976.960115 height=13 module=consensus round=0 server=node step=1
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received proposal module=consensus proposal={"Type":32,"block_id":{"hash":"D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4","parts":{"hash":"22411A20B7F14CDA33244420FBDDAF24450C0628C7A06034FF22DAC3699DDCC8","total":1}},"height":13,"pol_round":-1,"round":0,"signature":"DEuqnaQmvyYbUwckttJmgKdpRu6eVm9i+9rQ1pIrV2PidkMNdWRZBLdmNghkIrUzGbW8Xd7UVJxtLRmwRASgBg==","timestamp":"2023-04-18T21:30:01.49450663Z"} server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received complete proposal block hash=D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4 height=13 module=consensus server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF finalizing commit of block hash={} height=13 module=consensus num_txs=0 root=1A8CA1AF139CCC80EC007C6321D8A63A46A793386EE2EDF9A5CA0AB2C90728B7 server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF minted coins from module account amount=2059730459416582643aphoton from=mint module=x/bank
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF executed block height=13 module=state num_invalid_txs=0 num_valid_txs=0 server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF commit synced commit=436F6D6D697449447B5B363520313037203630203232372039352038352032303820313334203231392032303520313433203130372031343920313431203139203139322038362031323720362031383520323533203137362031333820313735203135392031383620323334203135382031323120313431203230342037335D3A447D
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF committed state app_hash=416B3CE35F55D086DBCD8F6B958D13C0567F06B9FDB08AAF9FBAEA9E798DCC49 height=13 module=state num_txs=0 server=node
-laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF indexed block exents height=13 module=txindex server=node
-```
+4. Confirm operation of the registry CLI:
 
-7. Confirm operation of the registry CLI:
+   ```
+   laconic-so deployment --dir laconic-loaded-deployment exec cli "laconic cns status"
+   ```
 
-```
-laconic-so --stack fixturenet-laconic-loaded deploy exec cli "laconic cns status"
-```
-
-```
-{
-  "version": "0.3.0",
-  "node": {
-    "id": "4216af2ac9f68bda33a38803fc1b5c9559312c1d",
-    "network": "laconic_9000-1",
-    "moniker": "localtestnet"
-  },
-  "sync": {
-    "latest_block_hash": "1BDF4CB9AE2390DA65BCF997C83133C18014FCDDCAE03708488F0B56FCEEA429",
-    "latest_block_height": "5",
-    "latest_block_time": "2023-08-09 16:00:30.386903172 +0000 UTC",
-    "catching_up": false
-  },
-  "validator": {
-    "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
-    "voting_power": "1000000000000000"
-  },
-  "validators": [
-    {
-      "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
-      "voting_power": "1000000000000000",
-      "proposer_priority": "0"
-    }
-  ],
-  "num_peers": "0",
-  "peers": [],
-  "disk_usage": "292.0K"
-}
-```
+   ```
+   {
+     "version": "0.3.0",
+     "node": {
+       "id": "4216af2ac9f68bda33a38803fc1b5c9559312c1d",
+       "network": "laconic_9000-1",
+       "moniker": "localtestnet"
+     },
+     "sync": {
+       "latest_block_hash": "1BDF4CB9AE2390DA65BCF997C83133C18014FCDDCAE03708488F0B56FCEEA429",
+       "latest_block_height": "5",
+       "latest_block_time": "2023-08-09 16:00:30.386903172 +0000 UTC",
+       "catching_up": false
+     },
+     "validator": {
+       "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+       "voting_power": "1000000000000000"
+     },
+     "validators": [
+       {
+         "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+         "voting_power": "1000000000000000",
+         "proposer_priority": "0"
+       }
+     ],
+     "num_peers": "0",
+     "peers": [],
+     "disk_usage": "292.0K"
+   }
+   ```
 
 ## Configure Digital Ocean firewall
 
+(Note this step may not be necessary depending on the droplet image used)
+
 Let's open some ports.
 
 1. In the Digital Ocean web console, navigate to your droplet's main page. Select the "Networking" tab and scroll down to "Firewall".

docs/spec.md

@@ -1,6 +1,6 @@
 # Specification
 
-Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://github.com/cerc-io/stack-orchestrator/issues/315).
+Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315).
 
 ## Implementation
 

requirements.txt

@@ -10,3 +10,4 @@ pydantic==1.10.9
 tomli==2.0.1
 validators==0.22.0
 kubernetes>=28.1.0
+humanfriendly>=10.0

scripts/cloud-init-dev-mode-install.yaml

@@ -41,4 +41,4 @@ runcmd:
   - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
   - systemctl enable docker
   - systemctl start docker
-  - git clone https://github.com/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator
+  - git clone https://git.vdb.to/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator

scripts/cloud-init-user-mode-install.yaml

@@ -31,5 +31,5 @@ runcmd:
   - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
   - systemctl enable docker
   - systemctl start docker
-  - curl -L -o /usr/local/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+  - curl -L -o /usr/local/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
   - chmod +x /usr/local/bin/laconic-so

scripts/quick-deploy-test.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+# Beginnings of a script to quickly spin up and test a deployment
+if [[ -n "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+if [[ -n "$1" ]]; then
+	stack_name=$1
+else
+	stack_name="test"
+fi
+spec_file_name="${stack_name}-spec.yml"
+deployment_dir_name="${stack_name}-deployment"
+rm -f ${spec_file_name}
+rm -rf ${deployment_dir_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose init --output ${spec_file_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose create --deployment-dir ${deployment_dir_name} --spec-file ${spec_file_name}
+#laconic-so deployment --dir ${deployment_dir_name} start
+#laconic-so deployment --dir ${deployment_dir_name} ps
+#laconic-so deployment --dir ${deployment_dir_name} stop

scripts/quick-install-linux.sh

@@ -137,7 +137,7 @@ fi
 echo "**************************************************************************************"
 echo "Installing laconic-so"
 # install latest `laconic-so`
-distribution_url=https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+distribution_url=https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 install_filename=${install_dir}/laconic-so
 mkdir -p  ${install_dir}
 curl -L -o ${install_filename} ${distribution_url}

setup.py

@@ -13,7 +13,7 @@ setup(
     description='Orchestrates deployment of the Laconic stack',
     long_description=long_description,
     long_description_content_type="text/markdown",
-    url='https://github.com/cerc-io/stack-orchestrator',
+    url='https://git.vdb.to/cerc-io/stack-orchestrator',
     py_modules=['stack_orchestrator'],
     packages=find_packages(),
     install_requires=[requirements],

stack_orchestrator/build/build_containers.py

@@ -25,10 +25,13 @@ import sys
 from decouple import config
 import subprocess
 import click
-import importlib.resources
 from pathlib import Path
-from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config, stack_is_external
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import include_exclude_check, stack_is_external, error_exit
 from stack_orchestrator.base import get_npm_registry_url
+from stack_orchestrator.build.build_types import BuildContext
+from stack_orchestrator.build.publish import publish_image
+from stack_orchestrator.build.build_util import get_containers_in_scope
 
 # TODO: find a place for this
 #    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
@@ -59,69 +62,58 @@ def make_container_build_env(dev_root_path: str,
     return container_build_env
 
 
-def process_container(stack: str,
-                      container,
-                      container_build_dir: str,
-                      container_build_env: dict,
-                      dev_root_path: str,
-                      quiet: bool,
-                      verbose: bool,
-                      dry_run: bool,
-                      continue_on_error: bool,
-                      ):
-    if not quiet:
-        print(f"Building: {container}")
+def process_container(build_context: BuildContext) -> bool:
+    if not opts.o.quiet:
+        print(f"Building: {build_context.container}")
 
-    default_container_tag = f"{container}:local"
-    container_build_env.update({"CERC_DEFAULT_CONTAINER_IMAGE_TAG": default_container_tag})
+    default_container_tag = f"{build_context.container}:local"
+    build_context.container_build_env.update({"CERC_DEFAULT_CONTAINER_IMAGE_TAG": default_container_tag})
 
     # Check if this is in an external stack
-    if stack_is_external(stack):
-        container_parent_dir = Path(stack).joinpath("container-build")
-        temp_build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+    if stack_is_external(build_context.stack):
+        container_parent_dir = Path(build_context.stack).joinpath("container-build")
+        temp_build_dir = container_parent_dir.joinpath(build_context.container.replace("/", "-"))
         temp_build_script_filename = temp_build_dir.joinpath("build.sh")
         # Now check if the container exists in the external stack.
         if not temp_build_script_filename.exists():
             # If not, revert to building an internal container
-            container_parent_dir = container_build_dir
+            container_parent_dir = build_context.container_build_dir
     else:
-        container_parent_dir = container_build_dir
+        container_parent_dir = build_context.container_build_dir
 
-    build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+    build_dir = container_parent_dir.joinpath(build_context.container.replace("/", "-"))
     build_script_filename = build_dir.joinpath("build.sh")
 
-    if verbose:
+    if opts.o.verbose:
         print(f"Build script filename: {build_script_filename}")
     if os.path.exists(build_script_filename):
         build_command = build_script_filename.as_posix()
     else:
-        if verbose:
+        if opts.o.verbose:
             print(f"No script file found: {build_script_filename}, using default build script")
-        repo_dir = container.split('/')[1]
+        repo_dir = build_context.container.split('/')[1]
         # TODO: make this less of a hack -- should be specified in some metadata somewhere
         # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
-        repo_full_path = os.path.join(dev_root_path, repo_dir)
+        repo_full_path = os.path.join(build_context.dev_root_path, repo_dir)
         repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
-        build_command = os.path.join(container_build_dir,
+        build_command = os.path.join(build_context.container_build_dir,
                                      "default-build.sh") + f" {default_container_tag} {repo_dir_or_build_dir}"
-    if not dry_run:
+    if not opts.o.dry_run:
         # No PATH at all causes failures with podman.
-        if "PATH" not in container_build_env:
-            container_build_env["PATH"] = os.environ["PATH"]
-        if verbose:
-            print(f"Executing: {build_command} with environment: {container_build_env}")
-        build_result = subprocess.run(build_command, shell=True, env=container_build_env)
-        if verbose:
+        if "PATH" not in build_context.container_build_env:
+            build_context.container_build_env["PATH"] = os.environ["PATH"]
+        if opts.o.verbose:
+            print(f"Executing: {build_command} with environment: {build_context.container_build_env}")
+        build_result = subprocess.run(build_command, shell=True, env=build_context.container_build_env)
+        if opts.o.verbose:
             print(f"Return code is: {build_result.returncode}")
         if build_result.returncode != 0:
-            print(f"Error running build for {container}")
-            if not continue_on_error:
-                print("FATAL Error: container build failed and --continue-on-error not set, exiting")
-                sys.exit(1)
-            else:
-                print("****** Container Build Error, continuing because --continue-on-error is set")
+            return False
+        else:
+            return True
     else:
         print("Skipped")
+        return True
 
 
 @click.command()
@@ -129,17 +121,14 @@ def process_container(stack: str,
 @click.option('--exclude', help="don\'t build these containers")
 @click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
 @click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.option("--publish-images", is_flag=True, default=False, help="Publish the built images in the specified image registry")
+@click.option("--image-registry", help="Specify the image registry for --publish-images")
 @click.pass_context
-def command(ctx, include, exclude, force_rebuild, extra_build_args):
+def command(ctx, include, exclude, force_rebuild, extra_build_args, publish_images, image_registry):
     '''build the set of containers required for a complete stack'''
 
-    quiet = ctx.obj.quiet
-    verbose = ctx.obj.verbose
-    dry_run = ctx.obj.dry_run
-    debug = ctx.obj.debug
     local_stack = ctx.obj.local_stack
     stack = ctx.obj.stack
-    continue_on_error = ctx.obj.continue_on_error
 
     # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
     container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
@@ -150,39 +139,45 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
     else:
         dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
 
-    if not quiet:
+    if not opts.o.quiet:
         print(f'Dev Root is: {dev_root_path}')
 
     if not os.path.isdir(dev_root_path):
         print('Dev root directory doesn\'t exist, creating')
 
-    # See: https://stackoverflow.com/a/20885799/1701505
-    from stack_orchestrator import data
-    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
-        all_containers = container_list_file.read().splitlines()
+    if publish_images:
+        if not image_registry:
+            error_exit("--image-registry must be supplied with --publish-images")
 
-    containers_in_scope = []
-    if stack:
-        stack_config = get_parsed_stack_config(stack)
-        containers_in_scope = stack_config['containers']
-    else:
-        containers_in_scope = all_containers
-
-    if verbose:
-        print(f'Containers: {containers_in_scope}')
-        if stack:
-            print(f"Stack: {stack}")
+    containers_in_scope = get_containers_in_scope(stack)
 
     container_build_env = make_container_build_env(dev_root_path,
                                                    container_build_dir,
-                                                   debug,
+                                                   opts.o.debug,
                                                    force_rebuild,
                                                    extra_build_args)
 
     for container in containers_in_scope:
         if include_exclude_check(container, include, exclude):
-            process_container(stack, container, container_build_dir, container_build_env,
-                              dev_root_path, quiet, verbose, dry_run, continue_on_error)
+
+            build_context = BuildContext(
+                stack,
+                container,
+                container_build_dir,
+                container_build_env,
+                dev_root_path
+            )
+            result = process_container(build_context)
+            if result:
+                if publish_images:
+                    publish_image(f"{container}:local", image_registry)
+            else:
+                print(f"Error running build for {build_context.container}")
+                if not opts.o.continue_on_error:
+                    error_exit("container build failed and --continue-on-error not set, exiting")
+                    sys.exit(1)
+                else:
+                    print("****** Container Build Error, continuing because --continue-on-error is set")
         else:
-            if verbose:
+            if opts.o.verbose:
                 print(f"Excluding: {container}")

stack_orchestrator/build/build_types.py

@@ -0,0 +1,29 @@
+# Copyright © 2024 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+
+from dataclasses import dataclass
+from pathlib import Path
+from typing import Mapping
+
+
+@dataclass
+class BuildContext:
+    stack: str
+    container: str
+    container_build_dir: Path
+    container_build_env: Mapping[str,str]
+    dev_root_path: str
+

stack_orchestrator/build/build_util.py

@@ -0,0 +1,43 @@
+# Copyright © 2024 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+import importlib.resources
+
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import get_parsed_stack_config, warn_exit
+
+
+def get_containers_in_scope(stack: str):
+
+    # See: https://stackoverflow.com/a/20885799/1701505
+    from stack_orchestrator import data
+    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
+        all_containers = container_list_file.read().splitlines()
+
+    containers_in_scope = []
+    if stack:
+        stack_config = get_parsed_stack_config(stack)
+        if "containers" not in stack_config or stack_config["containers"] is None:
+            warn_exit(f"stack {stack} does not define any containers")
+        containers_in_scope = stack_config['containers']
+    else:
+        containers_in_scope = all_containers
+
+    if opts.o.verbose:
+        print(f'Containers: {containers_in_scope}')
+        if stack:
+            print(f"Stack: {stack}")
+
+    return containers_in_scope

stack_orchestrator/build/build_webapp.py

@@ -21,11 +21,14 @@
 # TODO: display the available list of containers; allow re-build of either all or specific containers
 
 import os
+import sys
+
 from decouple import config
 import click
 from pathlib import Path
 from stack_orchestrator.build import build_containers
-from stack_orchestrator.deploy.webapp.util import determine_base_container
+from stack_orchestrator.deploy.webapp.util import determine_base_container, TimedLogger
+from stack_orchestrator.build.build_types import BuildContext
 
 
 @click.command()
@@ -37,26 +40,25 @@ from stack_orchestrator.deploy.webapp.util import determine_base_container
 @click.pass_context
 def command(ctx, base_container, source_repo, force_rebuild, extra_build_args, tag):
     '''build the specified webapp container'''
+    logger = TimedLogger()
 
     quiet = ctx.obj.quiet
-    verbose = ctx.obj.verbose
-    dry_run = ctx.obj.dry_run
     debug = ctx.obj.debug
+    verbose = ctx.obj.verbose
     local_stack = ctx.obj.local_stack
     stack = ctx.obj.stack
-    continue_on_error = ctx.obj.continue_on_error
 
     # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
     container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
 
     if local_stack:
         dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+        logger.log(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
     else:
         dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
 
-    if not quiet:
-        print(f'Dev Root is: {dev_root_path}')
+    if verbose:
+        logger.log(f'Dev Root is: {dev_root_path}')
 
     if not base_container:
         base_container = determine_base_container(source_repo)
@@ -65,8 +67,23 @@ def command(ctx, base_container, source_repo, force_rebuild, extra_build_args, t
     container_build_env = build_containers.make_container_build_env(dev_root_path, container_build_dir, debug,
                                                                     force_rebuild, extra_build_args)
 
-    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
-                                       verbose, dry_run, continue_on_error)
+    if verbose:
+        logger.log(f"Building base container: {base_container}")
+
+    build_context_1 = BuildContext(
+        stack,
+        base_container,
+        container_build_dir,
+        container_build_env,
+        dev_root_path,
+    )
+    ok = build_containers.process_container(build_context_1)
+    if not ok:
+        logger.log("ERROR: Build failed.")
+        sys.exit(1)
+
+    if verbose:
+        logger.log(f"Base container {base_container} build finished.")
 
     # Now build the target webapp.  We use the same build script, but with a different Dockerfile and work dir.
     container_build_env["CERC_WEBAPP_BUILD_RUNNING"] = "true"
@@ -76,9 +93,25 @@ def command(ctx, base_container, source_repo, force_rebuild, extra_build_args, t
                                                                           "Dockerfile.webapp")
     if not tag:
         webapp_name = os.path.abspath(source_repo).split(os.path.sep)[-1]
-        container_build_env["CERC_CONTAINER_BUILD_TAG"] = f"cerc/{webapp_name}:local"
-    else:
-        container_build_env["CERC_CONTAINER_BUILD_TAG"] = tag
+        tag = f"cerc/{webapp_name}:local"
 
-    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
-                                       verbose, dry_run, continue_on_error)
+    container_build_env["CERC_CONTAINER_BUILD_TAG"] = tag
+
+    if verbose:
+        logger.log(f"Building app container: {tag}")
+
+    build_context_2 = BuildContext(
+        stack,
+        base_container,
+        container_build_dir,
+        container_build_env,
+        dev_root_path,
+    )
+    ok = build_containers.process_container(build_context_2)
+    if not ok:
+        logger.log("ERROR: Build failed.")
+        sys.exit(1)
+
+    if verbose:
+        logger.log(f"App container {base_container} build finished.")
+        logger.log("build-webapp complete", show_step_time=False, show_total_time=True)

stack_orchestrator/build/fetch_containers.py

@@ -0,0 +1,195 @@
+# Copyright © 2024 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+import click
+from dataclasses import dataclass
+import json
+import platform
+from python_on_whales import DockerClient
+from python_on_whales.components.manifest.cli_wrapper import ManifestCLI, ManifestList
+from python_on_whales.utils import run
+import requests
+from typing import List
+
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import include_exclude_check, error_exit
+from stack_orchestrator.build.build_util import get_containers_in_scope
+
+# Experimental fetch-container command
+
+
+@dataclass
+class RegistryInfo:
+    registry: str
+    registry_username: str
+    registry_token: str
+
+
+# Extending this code to support the --verbose option, cnosider contributing upstream
+# https://github.com/gabrieldemarmiesse/python-on-whales/blob/master/python_on_whales/components/manifest/cli_wrapper.py#L129
+class ExtendedManifestCLI(ManifestCLI):
+    def inspect_verbose(self, x: str) -> ManifestList:
+        """Returns a Docker manifest list object."""
+        json_str = run(self.docker_cmd + ["manifest", "inspect", "--verbose", x])
+        return json.loads(json_str)
+
+
+def _local_tag_for(container: str):
+    return f"{container}:local"
+
+
+# See: https://docker-docs.uclv.cu/registry/spec/api/
+# Emulate this:
+# $ curl -u "my-username:my-token" -X GET "https://<container-registry-hostname>/v2/cerc-io/cerc/test-container/tags/list"
+# {"name":"cerc-io/cerc/test-container","tags":["202402232130","202402232208"]}
+def _get_tags_for_container(container: str, registry_info: RegistryInfo) -> List[str]:
+    # registry looks like: git.vdb.to/cerc-io
+    registry_parts = registry_info.registry.split("/")
+    url = f"https://{registry_parts[0]}/v2/{registry_parts[1]}/{container}/tags/list"
+    if opts.o.debug:
+        print(f"Fetching tags from: {url}")
+    response = requests.get(url, auth=(registry_info.registry_username, registry_info.registry_token))
+    if response.status_code == 200:
+        tag_info = response.json()
+        if opts.o.debug:
+            print(f"container tags list: {tag_info}")
+        tags_array = tag_info["tags"]
+        return tags_array
+    else:
+        error_exit(f"failed to fetch tags from image registry, status code: {response.status_code}")
+
+
+def _find_latest(candidate_tags: List[str]):
+    # Lex sort should give us the latest first
+    sorted_candidates = sorted(candidate_tags)
+    if opts.o.debug:
+        print(f"sorted candidates: {sorted_candidates}")
+    return sorted_candidates[-1]
+
+
+def _filter_for_platform(container: str, 
+                         registry_info: RegistryInfo,
+                         tag_list: List[str]) -> List[str] :
+    filtered_tags = []
+    this_machine = platform.machine()
+    # Translate between Python and docker platform names
+    if this_machine == "x86_64":
+        this_machine = "amd64"
+    if this_machine == "aarch64":
+        this_machine = "arm64"
+    if opts.o.debug:
+        print(f"Python says the architecture is: {this_machine}")
+    docker = DockerClient()
+    for tag in tag_list:
+        remote_tag = f"{registry_info.registry}/{container}:{tag}"
+        manifest_cmd = ExtendedManifestCLI(docker.client_config)
+        manifest = manifest_cmd.inspect_verbose(remote_tag)
+        if opts.o.debug:
+            print(f"manifest: {manifest}")
+        image_architecture =  manifest["Descriptor"]["platform"]["architecture"]
+        if opts.o.debug:
+            print(f"image_architecture: {image_architecture}")
+        if this_machine == image_architecture:
+            filtered_tags.append(tag)
+    if opts.o.debug:
+        print(f"Tags filtered for platform: {filtered_tags}")
+    return filtered_tags
+
+
+def _get_latest_image(container: str, registry_info: RegistryInfo):
+    all_tags = _get_tags_for_container(container, registry_info)
+    tags_for_platform = _filter_for_platform(container, registry_info, all_tags)
+    if len(tags_for_platform) > 0:
+        latest_tag = _find_latest(tags_for_platform)
+        return f"{container}:{latest_tag}"
+    else:
+        return None
+
+
+def _fetch_image(tag: str, registry_info: RegistryInfo):
+    docker = DockerClient()
+    remote_tag = f"{registry_info.registry}/{tag}"
+    if opts.o.debug:
+        print(f"Attempting to pull this image: {remote_tag}")
+    docker.image.pull(remote_tag)
+
+
+def _exists_locally(container: str):
+    docker = DockerClient()
+    return docker.image.exists(_local_tag_for(container))
+
+
+def _add_local_tag(remote_tag: str, registry: str, local_tag: str):
+    docker = DockerClient()
+    docker.image.tag(f"{registry}/{remote_tag}", local_tag)
+
+
+@click.command()
+@click.option('--include', help="only fetch these containers")
+@click.option('--exclude', help="don\'t fetch these containers")
+@click.option("--force-local-overwrite", is_flag=True, default=False, help="Overwrite a locally built image, if present")
+@click.option("--image-registry", required=True, help="Specify the image registry to fetch from")
+@click.option("--registry-username", required=True, help="Specify the image registry username")
+@click.option("--registry-token", required=True, help="Specify the image registry access token")
+@click.pass_context
+def command(ctx, include, exclude, force_local_overwrite, image_registry, registry_username, registry_token):
+    '''EXPERIMENTAL: fetch the images for a stack from remote registry'''
+
+    registry_info = RegistryInfo(image_registry, registry_username, registry_token)
+    docker = DockerClient()
+    if not opts.o.quiet:
+        print("Logging into container registry:")
+    docker.login(registry_info.registry, registry_info.registry_username, registry_info.registry_token)
+    # Generate list of target containers
+    stack = ctx.obj.stack
+    containers_in_scope = get_containers_in_scope(stack)
+    all_containers_found = True
+    for container in containers_in_scope:
+        local_tag = _local_tag_for(container)
+        if include_exclude_check(container, include, exclude):
+            if opts.o.debug:
+                print(f"Processing: {container}")
+            # For each container, attempt to find the latest of a set of
+            # images with the correct name and platform in the specified registry
+            image_to_fetch = _get_latest_image(container, registry_info)
+            if not image_to_fetch:
+                print(f"Warning: no image found to fetch for container: {container}")
+                all_containers_found = False
+                continue
+            if opts.o.debug:
+                print(f"Fetching: {image_to_fetch}")
+            _fetch_image(image_to_fetch, registry_info)
+            # Now check if the target container already exists exists locally already
+            if (_exists_locally(container)):
+                if not opts.o.quiet:
+                    print(f"Container image {container} already exists locally")
+                # if so, fail unless the user specified force-local-overwrite
+                if (force_local_overwrite):
+                    # In that case remove the existing :local tag
+                    if not opts.o.quiet:
+                        print(f"Warning: overwriting local tag from this image: {container} because "
+                              "--force-local-overwrite was specified")
+                else:
+                    if not opts.o.quiet:
+                        print(f"Skipping local tagging for this image: {container} because that would "
+                              "overwrite an existing :local tagged image, use --force-local-overwrite to do so.")
+                    continue
+            # Tag the fetched image with the :local tag
+            _add_local_tag(image_to_fetch, image_registry, local_tag)
+        else:
+            if opts.o.verbose:
+                print(f"Excluding: {container}")
+    if not all_containers_found:
+        print("Warning: couldn't find usable images for one or more containers, this stack will not deploy")

stack_orchestrator/build/publish.py

@@ -0,0 +1,48 @@
+# Copyright © 2024 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+from datetime import datetime
+from python_on_whales import DockerClient
+
+from stack_orchestrator.opts import opts
+from stack_orchestrator.util import error_exit
+
+
+def _publish_tag_for_image(local_image_tag: str, remote_repo: str, version: str):
+    # Turns image tags of the form: foo/bar:local into remote.repo/org/bar:deploy
+    (image_name, image_version) = local_image_tag.split(":")
+    if image_version == "local":
+        return f"{remote_repo}/{image_name}:{version}"
+    else:
+        error_exit("Asked to publish a non-locally built image")
+
+
+def publish_image(local_tag, registry):
+    if opts.o.verbose:
+        print(f"Publishing this image: {local_tag} to this registry: {registry}")
+    docker = DockerClient()
+    # Figure out the target image tag
+    # Eventually this version will be generated from the source repo state
+    # Using a timestemp is an intermediate step
+    version = datetime.now().strftime("%Y%m%d%H%M")
+    remote_tag = _publish_tag_for_image(local_tag, registry, version)
+    # Tag the image thus
+    if opts.o.debug:
+        print(f"Tagging {local_tag} to {remote_tag}")
+    docker.image.tag(local_tag, remote_tag)
+    # Push it to the desired registry
+    if opts.o.verbose:
+        print(f"Pushing image {remote_tag}")
+    docker.image.push(remote_tag)

stack_orchestrator/constants.py

@@ -27,6 +27,12 @@ kube_config_key = "kube-config"
 deploy_to_key = "deploy-to"
 network_key = "network"
 http_proxy_key = "http-proxy"
-image_resigtry_key = "image-registry"
+image_registry_key = "image-registry"
+configmaps_key = "configmaps"
+resources_key = "resources"
+volumes_key = "volumes"
+security_key = "security"
+annotations_key = "annotations"
+labels_key = "labels"
 kind_config_filename = "kind-config.yml"
 kube_config_filename = "kubeconfig.yml"

stack_orchestrator/data/compose/docker-compose-container-registry.yml

@@ -0,0 +1,15 @@
+services:
+  registry:
+    image: registry:2.8
+    restart: always
+    environment:
+      REGISTRY_LOG_LEVEL: ${REGISTRY_LOG_LEVEL}
+    volumes:
+      - config:/config:ro
+      - registry-data:/var/lib/registry
+    ports:
+      - "5000"
+
+volumes:
+  config:
+  registry-data:

stack_orchestrator/data/compose/docker-compose-fixturenet-laconicd.yml

@@ -7,7 +7,9 @@ services:
       # The cosmos-sdk node's database directory:
       - laconicd-data:/root/.laconicd
       # TODO: look at folding these scripts into the container
-      - laconicd-scripts:/docker-entrypoint-scripts.d:ro
+      - ../config/fixturenet-laconicd/create-fixturenet.sh:/docker-entrypoint-scripts.d/create-fixturenet.sh
+      - ../config/fixturenet-laconicd/export-mykey.sh:/docker-entrypoint-scripts.d/export-mykey.sh
+      - ../config/fixturenet-laconicd/export-myaddress.sh:/docker-entrypoint-scripts.d/export-myaddress.sh
     # TODO: determine which of the ports below is really needed
     ports:
       - "6060"
@@ -22,9 +24,7 @@ services:
   cli:
     image: cerc/laconic-registry-cli:local
     volumes:
-      - cli-config:/registry-cli-config
+      - ../config/fixturenet-laconicd/registry-cli-config-template.yml:/registry-cli-config-template.yml
 
 volumes:
   laconicd-data:
-  laconicd-scripts:
-  cli-config:

stack_orchestrator/data/compose/docker-compose-mainnet-laconicd.yml

@@ -9,7 +9,9 @@ services:
       - laconicd-config:/root/.laconicd/config
       - laconicd-keyring:/root/.laconicd/keyring-test
       # TODO: look at folding these scripts into the container
-      - laconicd-scripts:/docker-entrypoint-scripts.d:ro
+      - ../config/mainnet-laconicd/scripts/run-laconicd.sh:/opt/run-laconicd.sh
+      - ../config/mainnet-laconicd/scripts/export-mykey.sh:/docker-entrypoint-scripts.d/export-mykey.sh
+      - ../config/mainnet-laconicd/scripts/export-myaddress.sh:/docker-entrypoint-scripts.d/export-myaddress.sh
     # TODO: determine which of the ports below is really needed
     ports:
       - "6060"
@@ -24,11 +26,9 @@ services:
   cli:
     image: cerc/laconic-registry-cli:local
     volumes:
-      - cli-config:/registry-cli-config
+      - ../config/mainnet-laconicd/registry-cli-config-template.yml:/registry-cli-config-template.yml
 
 volumes:
   laconicd-data:
   laconicd-config:
-  laconicd-scripts:
   laconicd-keyring:
-  cli-config:

stack_orchestrator/data/compose/docker-compose-mars-v2.yml

@@ -0,0 +1,12 @@
+version: "3.2"
+
+services:
+  mars:
+    image: cerc/mars-v2:local
+    restart: always
+    ports:
+      - "3000:3000"
+    environment:
+      - URL_OSMOSIS_REST=https://lcd-osmosis.blockapsis.com
+      - URL_OSMOSIS_RPC=https://rpc-osmosis.blockapsis.com
+      - WALLET_CONNECT_ID=0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x

stack_orchestrator/data/compose/docker-compose-mars.yml

@@ -0,0 +1,20 @@
+version: "3.2"
+
+services:
+  mars:
+    image: cerc/mars:local
+    restart: always
+    ports:
+      - "3000:3000"
+    environment:
+      - URL_OSMOSIS_GQL=https://osmosis-node.marsprotocol.io/GGSFGSFGFG34/osmosis-hive-front/graphql
+      - URL_OSMOSIS_REST=https://lcd-osmosis.blockapsis.com
+      - URL_OSMOSIS_RPC=https://rpc-osmosis.blockapsis.com
+      - URL_NEUTRON_GQL=https://neutron.rpc.p2p.world/qgrnU6PsQZA8F9S5Fb8Fn3tV3kXmMBl2M9bcc9jWLjQy8p/hive/graphql
+      - URL_NEUTRON_REST=https://rest-kralum.neutron-1.neutron.org
+      - URL_NEUTRON_RPC=https://rpc-kralum.neutron-1.neutron.org
+      - URL_NEUTRON_TEST_GQL=https://testnet-neutron-gql.marsprotocol.io/graphql
+      - URL_NEUTRON_TEST_REST=https://rest-palvus.pion-1.ntrn.tech
+      - URL_NEUTRON_TEST_RPC=https://rpc-palvus.pion-1.ntrn.tech
+      - WALLET_CONNECT_ID=0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x
+

stack_orchestrator/data/compose/docker-compose-nitro-auth.yml

@@ -0,0 +1,141 @@
+version: '3.7'
+
+services:
+  go-nitro-alice:
+    image: cerc/go-nitro:local
+    hostname: go-nitro-alice
+    restart: on-failure
+    depends_on:
+      - go-nitro-bootnode
+    environment:
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK_ALICE:-888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    env_file:
+      - ../config/nitro-auth/alice.env
+    entrypoint: ["bash", "-c", "/app/run-nitro-node.sh"]
+    volumes:
+      - nitro_deployment:/app/deployment
+      - go_nitro_data_alice:/app/data
+      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "4006"]
+      interval: 5s
+      timeout: 5s
+      retries: 100
+      start_period: 100s
+    ports:
+      - "3006"
+      - "4006"
+      - "5006"
+      - "4106"
+      - "4206"
+      - "4216"
+
+  go-nitro-bob:
+    image: cerc/go-nitro:local
+    hostname: go-nitro-bob
+    restart: on-failure
+    depends_on:
+      - go-nitro-bootnode
+    environment:
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK_BOB:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    env_file:
+      - ../config/nitro-auth/bob.env
+    entrypoint: ["bash", "-c", "/app/run-nitro-node.sh"]
+    volumes:
+      - nitro_deployment:/app/deployment
+      - go_nitro_data_bob:/app/data
+      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "4007"]
+      interval: 5s
+      timeout: 5s
+      retries: 100
+      start_period: 100s
+    ports:
+      - "3007"
+      - "4007"
+      - "5007"
+      - "4107"
+      - "4207"
+      - "4217"
+
+  ts-nitro-charlie:
+    image: cerc/ts-nitro:local
+    hostname: ts-nitro-charlie
+    restart: on-failure
+    depends_on:
+      - go-nitro-bootnode
+    environment:
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK_CHARLIE:-111b7500bdce494d6f4bcfe8c2a0dde2ef92f751d9070fac6475dbd6d8021b3f}
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+      CERC_NITRO_TARGET_URL: ${CERC_NITRO_TARGET_URL:-http://localhost:5678}
+      CERC_RUNTIME_ENV_RPC_URL: ${CERC_RUNTIME_ENV_RPC_URL:-ws://localhost:8546}
+      PUBLIC_URL: http://localhost:5678/ts-nitro
+    env_file:
+      - ../config/nitro-auth/charlie.env
+    entrypoint: ["bash", "-c", "/app/run.sh"]
+    volumes:
+      - nitro_deployment:/app/deployment
+      - ../config/ts-nitro/run.sh:/app/run.sh
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "3000"]
+      interval: 5s
+      timeout: 5s
+      retries: 100
+      start_period: 100s
+
+  go-nitro-bootnode:
+    image: cerc/go-nitro:local
+    hostname: go-nitro-bootnode
+    restart: on-failure
+    environment:
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+      CERC_NITRO_RELAY_ON: true
+    env_file:
+      - ../config/nitro-auth/bootnode.env
+    entrypoint: [ "bash", "-c", "/app/run-nitro-node.sh" ]
+    volumes:
+      - nitro_deployment:/app/deployment
+      - go_nitro_data_bootnode:/app/data
+      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
+    healthcheck:
+      test: [ "CMD", "nc", "-vz", "localhost", "4008" ]
+      interval: 5s
+      timeout: 5s
+      retries: 100
+      start_period: 100s
+    ports:
+      - "9090"
+
+  nitro-caddy:
+    image: caddy:2-alpine
+    restart: always
+    environment:
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT:-http://fixturenet-eth-geth-1:8545}
+    volumes:
+      - ../config/nitro-auth/caddy/Caddyfile:/etc/caddy/Caddyfile
+    ports:
+      - "5678"
+    depends_on:
+      - go-nitro-alice
+      - go-nitro-bob
+
+volumes:
+  go_nitro_data_alice:
+  go_nitro_data_bob:
+  go_nitro_data_bootnode:
+  nitro_deployment:

stack_orchestrator/data/compose/docker-compose-ping-pub.yml

@@ -0,0 +1,8 @@
+version: "3.2"
+
+services:
+  ping-pub:
+    image: cerc/ping-pub:local
+    restart: always
+    ports:
+      - "5173:5173"

stack_orchestrator/data/compose/docker-compose-snowballtools-base-backend.yml

@@ -0,0 +1,13 @@
+services:
+  snowballtools-base-backend:
+    image: cerc/snowballtools-base-backend:local
+    restart: always
+    volumes:
+      - data:/data
+      - config:/config:ro
+    ports:
+      - 8000
+
+volumes:
+  data:
+  config:

stack_orchestrator/data/compose/docker-compose-test-database.yml

@@ -0,0 +1,20 @@
+services:
+
+  database:
+    image: cerc/test-database-container:local
+    restart: always
+    volumes:
+      - db-data:/var/lib/postgresql/data
+    environment:
+      POSTGRES_USER: "test-user"
+      POSTGRES_DB: "test-db"
+      POSTGRES_PASSWORD: "password"
+      POSTGRES_INITDB_ARGS: "-E UTF8 --locale=C"
+    ports:
+      - "5432"
+    
+  test-client:
+    image: cerc/test-database-client:local
+
+volumes:
+  db-data:

stack_orchestrator/data/compose/docker-compose-test.yml

@@ -5,12 +5,16 @@ services:
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_TEST_PARAM_1: ${CERC_TEST_PARAM_1:-FAILED}
+      CERC_TEST_PARAM_2: "CERC_TEST_PARAM_2_VALUE"
+      CERC_TEST_PARAM_3: ${CERC_TEST_PARAM_3:-FAILED}
     volumes:
-      - test-data:/data
+      - test-data-bind:/data
+      - test-data-auto:/data2
       - test-config:/config:ro
     ports:
       - "80"
 
 volumes:
-  test-data:
+  test-data-bind:
+  test-data-auto:
   test-config:

stack_orchestrator/data/compose/docker-compose-webapp-template.yml

@@ -5,4 +5,4 @@ services:
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
     ports:
-      - "3000"
+      - "80"

stack_orchestrator/data/config/fixturenet-laconic-loaded/create-fixturenet.sh

@@ -1,125 +0,0 @@
-#!/bin/bash
-
-# TODO: this file is now an unmodified copy of cerc-io/laconicd/init.sh
-# so we should have a mechanism to bundle it inside the container rather than link from here
-# at deploy time.
-
-KEY="mykey"
-CHAINID="laconic_9000-1"
-MONIKER="localtestnet"
-KEYRING="test"
-KEYALGO="eth_secp256k1"
-LOGLEVEL="info"
-# trace evm
-TRACE="--trace"
-# TRACE=""
-
-if [ "$1" == "clean" ] || [ ! -d "$HOME/.laconicd/data/blockstore.db" ]; then
-  # validate dependencies are installed
-  command -v jq > /dev/null 2>&1 || { echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"; exit 1; }
-
-  # remove existing daemon and client
-  rm -rf $HOME/.laconicd/*
-  rm -rf $HOME/.laconic/*
-
-  if [ -n "`which make`" ]; then
-    make install
-  fi
-
-  laconicd config keyring-backend $KEYRING
-  laconicd config chain-id $CHAINID
-
-  # if $KEY exists it should be deleted
-  laconicd keys add $KEY --keyring-backend $KEYRING --algo $KEYALGO
-
-  # Set moniker and chain-id for Ethermint (Moniker can be anything, chain-id must be an integer)
-  laconicd init $MONIKER --chain-id $CHAINID
-
-  # Change parameter token denominations to aphoton
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["staking"]["params"]["bond_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["crisis"]["constant_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["gov"]["deposit_params"]["min_deposit"][0]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["mint"]["params"]["mint_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  # Custom modules
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commit_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveal_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_minimum_bid"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-  if [[ "$TEST_REGISTRY_EXPIRY" == "true" ]]; then
-    echo "Setting timers for expiry tests."
-
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  fi
-
-  if [[ "$TEST_AUCTION_ENABLED" == "true" ]]; then
-    echo "Enabling auction and setting timers."
-
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_enabled"]=true' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="300s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  fi
-
-  # increase block time (?)
-  cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["time_iota_ms"]="1000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-  # Set gas limit in genesis
-  cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["max_gas"]="10000000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-  # disable produce empty block
-  if [[ "$OSTYPE" == "darwin"* ]]; then
-      sed -i '' 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-    else
-      sed -i 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-  fi
-
-  if [[ $1 == "pending" ]]; then
-    if [[ "$OSTYPE" == "darwin"* ]]; then
-        sed -i '' 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-        sed -i '' 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-    else
-        sed -i 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-        sed -i 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-    fi
-  fi
-
-  # Allocate genesis accounts (cosmos formatted addresses)
-  laconicd add-genesis-account $KEY 100000000000000000000000000aphoton --keyring-backend $KEYRING
-
-  # Sign genesis transaction
-  laconicd gentx $KEY 1000000000000000000000aphoton --keyring-backend $KEYRING --chain-id $CHAINID
-
-  # Collect genesis tx
-  laconicd collect-gentxs
-
-  # Run this to ensure everything worked and that the genesis file is setup correctly
-  laconicd validate-genesis
-
-  if [[ $1 == "pending" ]]; then
-    echo "pending mode is on, please wait for the first block committed."
-  fi
-else
-  echo "Using existing database at $HOME/.laconicd.  To replace, run '`basename $0` clean'"
-fi
-
-# Start the node (remove the --pruning=nothing flag if historical queries are not needed)
-laconicd start --pruning=nothing --evm.tracer=json $TRACE --log_level $LOGLEVEL --minimum-gas-prices=0.0001aphoton --json-rpc.api eth,txpool,personal,net,debug,web3,miner --api.enable --gql-server --gql-playground

stack_orchestrator/data/config/fixturenet-laconic-loaded/export-myaddress.sh

@@ -1,2 +0,0 @@
-#!/bin/sh
-laconicd keys show mykey | grep address | cut -d ' ' -f 3

stack_orchestrator/data/config/fixturenet-laconic-loaded/export-mykey.sh

@@ -1,2 +0,0 @@
-#!/bin/sh
-echo y | laconicd keys export mykey --unarmored-hex --unsafe

stack_orchestrator/data/config/fixturenet-laconic-loaded/registry-cli-config-template.yml

@@ -1,9 +0,0 @@
-services:
-  cns:
-    restEndpoint: 'http://laconicd:1317'
-    gqlEndpoint: 'http://laconicd:9473/api'
-    userKey: REPLACE_WITH_MYKEY
-    bondId:
-    chainId: laconic_9000-1
-    gas: 350000
-    fees: 200000aphoton

stack_orchestrator/data/config/go-nitro/run-nitro-node.sh

@@ -4,6 +4,11 @@ if [ -n "$CERC_SCRIPT_DEBUG" ]; then
   set -x
 fi
 
+if [ -z "$CERC_NITRO_CHAIN_PK" ] || [ -z "$CERC_NITRO_CHAIN_URL" ]; then
+  echo "You most set both CERC_NITRO_CHAIN_PK and CERC_NITRO_CHAIN_URL." 1>&2
+  exit 1
+fi
+
 nitro_addresses_file="/app/deployment/nitro-addresses.json"
 
 # Check if CERC_NA_ADDRESS environment variable is set
@@ -29,22 +34,86 @@ fi
 
 echo "Running Nitro node"
 
-# Assuming CERC_NITRO_CHAIN_URL is of format <ws|http>://host:port
-ws_host=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 1)
-ws_port=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 2)
-
-# Wait till chain endpoint is available
-retry_interval=5
-while true; do
-  nc -z -w 1 "$ws_host" "$ws_port"
-
-  if [ $? -eq 0 ]; then
-    echo "Chain endpoint is available"
-    break
+if [[ "${CERC_GO_NITRO_WAIT_FOR_CHAIN:-true}" == "true" ]]; then
+  # Assuming CERC_NITRO_CHAIN_URL is of format <ws|http>://host[:port][/foo]
+  ws_host=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d'/' -f 1 | cut -d ':' -f 1)
+  ws_port=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d'/' -f 1 | cut -d ':' -f 2)
+  if [[ "$ws_port" == "$ws_host" ]]; then
+    ws_port=""
   fi
 
-  echo "Chain endpoint not yet available, retrying in $retry_interval seconds..."
-  sleep $retry_interval
-done
+  # Wait till chain endpoint is available
+  retry_interval=5
+  while true; do
+    nc -z -w 1 "$ws_host" "${ws_port:-443}"
 
-./nitro -chainurl ${CERC_NITRO_CHAIN_URL} -msgport ${CERC_NITRO_MSG_PORT} -rpcport ${CERC_NITRO_RPC_PORT} -wsmsgport ${CERC_NITRO_WS_MSG_PORT} -publicip "0.0.0.0" -pk ${CERC_NITRO_PK} -chainpk ${CERC_NITRO_CHAIN_PK} -naaddress ${NA_ADDRESS} -vpaaddress ${VPA_ADDRESS} -caaddress ${CA_ADDRESS} -usedurablestore ${CERC_NITRO_USE_DURABLE_STORE} -durablestorefolder ${CERC_NITRO_DURABLE_STORE_FOLDER} -tlscertfilepath "" -tlsKeyFilepath ""
+    if [ $? -eq 0 ]; then
+      echo "Chain endpoint is available"
+      break
+    fi
+
+    echo "Chain endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+  done
+fi
+
+if [[ -n "$CERC_NITRO_UI_PORT" ]] && [[ -d "/app-node/packages/nitro-gui/dist" ]]; then
+  for f in `ls /app-node/packages/nitro-gui/dist/assets/*.js`; do
+    sed -i "s#\"CERC_RUNTIME_ENV_RPC_HOST\"#\"localhost:${CERC_NITRO_RPC_PORT}\"#g" "$f"
+    sed -i "s#\"CERC_RUNTIME_ENV_TARGET_URL\"#\"http://localhost:5678\"#g" "$f"
+  done
+  http-server -p $CERC_NITRO_UI_PORT /app-node/packages/nitro-gui/dist &
+fi
+
+if [[ -n "$CERC_NITRO_AUTH_UI_PORT" ]] && [[ -d "/app-node/packages/nitro-auth-gui/dist" ]]; then
+  for f in `ls /app-node/packages/nitro-auth-gui/dist/assets/*.js`; do
+    sed -i "s#\"CERC_RUNTIME_ENV_RPC_URL\"#\"http://localhost:${CERC_NITRO_RPC_PORT}\"#g" "$f"
+    sed -i "s#\"CERC_RUNTIME_ENV_TARGET_URL\"#\"http://localhost:5678\"#g" "$f"
+  done
+  http-server -p $CERC_NITRO_AUTH_UI_PORT /app-node/packages/nitro-auth-gui/dist &
+fi
+
+if [[ "$CERC_NITRO_AUTH_ON" == "true" ]] && [[ -d "/app-node/packages/nitro-auth/dist" ]]; then
+  bash -c "sleep 6 && cd /app-node/packages/nitro-auth && yarn start" &
+fi
+
+if [[ "$CERC_NITRO_RELAY_ON" == "true" ]]; then
+  if [[ ! -f "/app/deployment/relay-node.json" ]]; then
+    node /usr/local/lib/node_modules/@cerc-io/peer/dist/cli/create-peer.js \
+       -f /app/deployment/relay-node.json
+  fi
+  DEBUG='laconic:*' node /usr/local/lib/node_modules/@cerc-io/peer/dist/cli/relay.js \
+    --host 0.0.0.0 \
+    -f /app/deployment/relay-node.json &
+fi
+
+if [[ -z "$CERC_CHAIN_START_BLOCK" ]]; then
+  if [[ ! -f "/app/deployment/chainstartblock.json" ]]; then
+    curl --location "$(echo $CERC_NITRO_CHAIN_URL | sed 's/^ws/http/' | sed 's#/ws/#/#')" \
+    --header 'Content-Type: application/json' \
+    --data '{
+        "jsonrpc": "2.0",
+        "id": 124,
+        "method": "eth_blockNumber",
+        "params": []
+    }' > /app/deployment/chainstartblock.json
+  fi
+  CERC_CHAIN_START_BLOCK=$(printf "%d" `cat /app/deployment/chainstartblock.json | jq -r '.result'`)
+fi
+
+cd /app
+./nitro \
+  -chainurl ${CERC_NITRO_CHAIN_URL} \
+  -msgport ${CERC_NITRO_MSG_PORT} \
+  -rpcport ${CERC_NITRO_RPC_PORT} \
+  -wsmsgport ${CERC_NITRO_WS_MSG_PORT} \
+  -publicip "0.0.0.0" \
+  -pk ${CERC_NITRO_PK:-$CERC_NITRO_CHAIN_PK} \
+  -chainpk ${CERC_NITRO_CHAIN_PK} \
+  -naaddress ${NA_ADDRESS} \
+  -vpaaddress ${VPA_ADDRESS} \
+  -caaddress ${CA_ADDRESS} \
+  -usedurablestore=${CERC_NITRO_USE_DURABLE_STORE} \
+  -durablestorefolder ${CERC_NITRO_DURABLE_STORE_FOLDER} \
+  -bootpeers "${CERC_NITRO_BOOT_PEERS}" \
+  -chainstartblock $CERC_CHAIN_START_BLOCK

stack_orchestrator/data/config/nitro-auth/alice.env

@@ -0,0 +1,19 @@
+# SET ME!  Your on-chain private key.
+#CERC_NITRO_CHAIN_PK=<MY_PK_GOES_HERE>
+
+# Default is CERC_NITRO_CHAIN_PK.
+#CERC_NITRO_PK=<MY_PK_GOES_HERE>
+
+# SET ME!  The WebSocket to connect to.
+#CERC_NITRO_CHAIN_URL=wss://linea-sepolia.infura.io/ws/v3/<MY_API_KEY_GOES_HERE>
+
+CERC_NITRO_AUTH_ON=false
+CERC_NITRO_AUTH_RPC_PORT=4006
+CERC_NITRO_AUTH_UI_PORT=4206
+CERC_NITRO_BOOT_PEERS="/dns4/go-nitro-bootnode/tcp/3008/p2p/16Uiu2HAmFYz5YPf3GtkfQsAwYJfDsKSm34U9qAiTwxW7RJUVGMRK"
+CERC_NITRO_DURABLE_STORE_FOLDER=/app/data/nitro-store
+CERC_NITRO_MSG_PORT=3006
+CERC_NITRO_RPC_PORT=4006
+CERC_NITRO_UI_PORT=4106
+CERC_NITRO_USE_DURABLE_STORE=true
+CERC_NITRO_WS_MSG_PORT=5006

stack_orchestrator/data/config/nitro-auth/bob.env

@@ -0,0 +1,21 @@
+# SET ME!  Your on-chain private key.
+#CERC_NITRO_CHAIN_PK=<MY_PK_GOES_HERE>
+
+# Default is CERC_NITRO_CHAIN_PK.
+#CERC_NITRO_PK=<MY_PK_GOES_HERE>
+
+# SET ME!  The WebSocket to connect to.
+#CERC_NITRO_CHAIN_URL=wss://linea-sepolia.infura.io/ws/v3/<MY_API_KEY_GOES_HERE>
+
+CERC_NITRO_AUTH_ON=true
+CERC_NITRO_AUTH_RPC_PORT=4007
+CERC_NITRO_AUTH_UI_PORT=4207
+CERC_NITRO_BOOT_PEERS="/dns4/go-nitro-bootnode/tcp/3008/p2p/16Uiu2HAmFYz5YPf3GtkfQsAwYJfDsKSm34U9qAiTwxW7RJUVGMRK"
+CERC_NITRO_DURABLE_STORE_FOLDER=/app/data/nitro-store
+CERC_NITRO_MSG_PORT=3007
+CERC_NITRO_RPC_PORT=4007
+CERC_NITRO_UI_PORT=4107
+CERC_NITRO_USE_DURABLE_STORE=true
+CERC_NITRO_WS_MSG_PORT=5007
+CERC_NITRO_MSG_PUBLIC_IP=127.0.0.1
+CERC_NITRO_MSG_PUBLIC_PORT=5007

stack_orchestrator/data/config/nitro-auth/bootnode.env

@@ -0,0 +1,17 @@
+CERC_NITRO_CHAIN_PK=596db2ac27479cfdf60f708bf64ae44a1c5090e9446cca011d72bc9a59b47d3d
+CERC_NITRO_PK=f41086394674cf00a66448c6688295d7330af39f6f38fed89ea023e39382d6a0
+
+# The WebSocket to connect to.
+#CERC_NITRO_CHAIN_URL=wss://linea-sepolia.infura.io/ws/v3/<MY_API_KEY_GOES_HERE>
+
+CERC_NITRO_AUTH_ON=false
+CERC_NITRO_AUTH_RPC_PORT=4008
+CERC_NITRO_AUTH_UI_PORT=4208
+CERC_NITRO_DURABLE_STORE_FOLDER=/app/data/nitro-store
+CERC_NITRO_MSG_PORT=3008
+CERC_NITRO_RPC_PORT=4008
+CERC_NITRO_UI_PORT=4108
+CERC_NITRO_USE_DURABLE_STORE=true
+CERC_NITRO_WS_MSG_PORT=5008
+
+CERC_SCRIPT_DEBUG=true

stack_orchestrator/data/config/nitro-auth/caddy/Caddyfile

@@ -0,0 +1,48 @@
+:5678 {
+  handle /pay* {
+    reverse_proxy http://go-nitro-bob:8547
+  }
+
+  @eth-key-in-header {
+    path_regexp /eth/?$
+    header X-Api-Key *
+  }
+
+  handle @eth-key-in-header {
+    forward_auth go-nitro-bob:8547 {
+      uri /auth/{header.x-api-key}
+    }
+    rewrite * /
+    reverse_proxy {$CERC_ETH_RPC_ENDPOINT} {
+      header_up Host {upstream_hostport}
+      header_up -X-Forwarded-*
+    }
+  }
+
+  @eth-key-in-path {
+    path_regexp apikey eth/(.+)$
+  }
+
+  handle @eth-key-in-path {
+    forward_auth go-nitro-bob:8547 {
+      uri /auth/{re.apikey.1}
+    }
+    rewrite * /
+    reverse_proxy {$CERC_ETH_RPC_ENDPOINT} {
+      header_up Host {upstream_hostport}
+      header_up -X-Forwarded-*
+    }
+  }
+
+  handle /eth* {
+    respond "401 Unauthorized" 401
+  }
+
+  handle /ts-nitro* {
+    reverse_proxy http://ts-nitro-charlie:3000
+  }
+
+  handle {
+    reverse_proxy http://go-nitro-alice:4206
+  }
+}

stack_orchestrator/data/config/nitro-auth/charlie.env

@@ -0,0 +1,19 @@
+# SET ME!  Your on-chain private key.
+#CERC_NITRO_CHAIN_PK=<MY_PK_GOES_HERE>
+
+# Default is CERC_NITRO_CHAIN_PK.
+#CERC_NITRO_PK=<MY_PK_GOES_HERE>
+
+# SET ME!  The WebSocket to connect to.
+#CERC_NITRO_CHAIN_URL=wss://linea-sepolia.infura.io/ws/v3/<MY_API_KEY_GOES_HERE>
+
+CERC_NITRO_AUTH_ON=false
+CERC_NITRO_AUTH_RPC_PORT=4009
+CERC_NITRO_AUTH_UI_PORT=4209
+CERC_NITRO_BOOT_PEERS="/dns4/go-nitro-bootnode/tcp/3008/p2p/16Uiu2HAmFYz5YPf3GtkfQsAwYJfDsKSm34U9qAiTwxW7RJUVGMRK"
+CERC_NITRO_DURABLE_STORE_FOLDER=/app/data/nitro-store
+CERC_NITRO_MSG_PORT=3009
+CERC_NITRO_RPC_PORT=4009
+CERC_NITRO_UI_PORT=4109
+CERC_NITRO_USE_DURABLE_STORE=true
+CERC_NITRO_WS_MSG_PORT=5009

stack_orchestrator/data/config/nitro-rpc-client/start.sh

@@ -0,0 +1,99 @@
+#!/bin/bash
+
+CERC_NITRO_RPC_FUND_AMOUNT=${CERC_NITRO_RPC_FUND_AMOUNT:-0}
+CERC_NITRO_RPC_HOST_ALICE=${CERC_NITRO_RPC_HOST_ALICE:-go-nitro-alice}
+CERC_NITRO_RPC_PORT_ALICE=${CERC_NITRO_RPC_PORT_ALICE:-4006}
+CERC_NITRO_USE_TLS=${CERC_NITRO_USE_TLS:-false}
+CERC_NITRO_ADDRESS_BOB=${CERC_NITRO_ADDRESS_BOB:-0xe07e314501cc73b24cf45a6577486017300e153c}
+
+
+# Wait till chain endpoint is available
+retry_interval=5
+while true; do
+  nc -z -w 1 "$CERC_NITRO_RPC_HOST_ALICE" "$CERC_NITRO_RPC_PORT_ALICE"
+
+  if [ $? -eq 0 ]; then
+    echo "Nitro endpoint is available"
+    break
+  fi
+
+  echo "Nitro endpoint not yet available, retrying in $retry_interval seconds..."
+  sleep $retry_interval
+done
+
+if [[ "$CERC_NITRO_RPC_FUND_AMOUNT" -gt 0 ]]; then
+  nitro-rpc-client -h $CERC_NITRO_RPC_HOST_ALICE \
+                   -p $CERC_NITRO_RPC_PORT_ALICE \
+                   -s=$CERC_NITRO_USE_TLS \
+                   get-all-ledger-channels | \
+                     jq "[.[] | select(.Status == \"Open\") | select(.Balance.Them == \"$CERC_NITRO_ADDRESS_BOB\")] | first" > \
+                     /app/deployment/nitro-ledger-channel-alice-to-bob.json
+
+  ledger_channel=$(jq -r '.ID' /app/deployment/nitro-ledger-channel-alice-to-bob.json 2>/dev/null | sed 's/^null$//')
+
+  if [[ -z "${ledger_channel}" ]]; then
+    echo "Creating new ledger channel ..."
+    nitro-rpc-client -h $CERC_NITRO_RPC_HOST_ALICE \
+                     -p $CERC_NITRO_RPC_PORT_ALICE \
+                     -s=$CERC_NITRO_USE_TLS \
+                     -n \
+                     direct-fund --amount $CERC_NITRO_RPC_FUND_AMOUNT $CERC_NITRO_ADDRESS_BOB
+
+    nitro-rpc-client -h $CERC_NITRO_RPC_HOST_ALICE \
+                     -p $CERC_NITRO_RPC_PORT_ALICE \
+                     -s=$CERC_NITRO_USE_TLS \
+                     get-all-ledger-channels | \
+                       jq "[.[] | select(.Status == \"Open\") | select(.Balance.Them == \"$CERC_NITRO_ADDRESS_BOB\")] | first" > \
+                       /app/deployment/nitro-ledger-channel-alice-to-bob.json
+
+    ledger_channel=$(jq -r '.ID' /app/deployment/nitro-ledger-channel-alice-to-bob.json)
+  fi
+
+  nitro-rpc-client -h $CERC_NITRO_RPC_HOST_ALICE \
+                   -p $CERC_NITRO_RPC_PORT_ALICE \
+                   -s=$CERC_NITRO_USE_TLS \
+                   get-payment-channels-by-ledger $ledger_channel > \
+                     /app/deployment/nitro-payment-channels-alice-to-bob.json
+
+  first_open_channel=$(jq '[.[] | select(.Status == "Open")] | first' /app/deployment/nitro-payment-channels-alice-to-bob.json | sed 's/^null$//')
+
+  if [[ -z "$first_open_channel" ]]; then
+    echo "Creating new payment channel ..."
+    nitro-rpc-client -h $CERC_NITRO_RPC_HOST_ALICE \
+                     -p $CERC_NITRO_RPC_PORT_ALICE \
+                     -s=$CERC_NITRO_USE_TLS \
+                     -n \
+                     virtual-fund --amount $((CERC_NITRO_RPC_FUND_AMOUNT/2)) $CERC_NITRO_ADDRESS_BOB
+
+    nitro-rpc-client -h $CERC_NITRO_RPC_HOST_ALICE \
+                     -p $CERC_NITRO_RPC_PORT_ALICE \
+                     -s=$CERC_NITRO_USE_TLS \
+                     get-payment-channels-by-ledger $ledger_channel > \
+                       /app/deployment/nitro-payment-channels-alice-to-bob.json
+
+    first_open_channel=$(jq '[.[] | select(.Status == "Open")] | first' /app/deployment/nitro-payment-channels-alice-to-bob.json | sed 's/^null$//')
+  fi
+
+  echo ""
+  echo "################################################################"
+  echo ""
+
+  echo "LEDGER:"
+  cat /app/deployment/nitro-ledger-channel-alice-to-bob.json | jq
+  echo ""
+  echo ""
+
+  echo "PAYMENT:"
+  cat /app/deployment/nitro-payment-channels-alice-to-bob.json | jq
+  echo ""
+  echo ""
+fi
+
+if [ -n "$1" ]; then
+  exec "$@"
+  exit $?
+fi
+
+while [ 1 -eq 1 ]; do
+  sleep 100
+done

stack_orchestrator/data/config/ts-nitro/run.sh

@@ -0,0 +1,45 @@
+#!/bin/bash
+
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+if [ -z "$CERC_NITRO_CHAIN_PK" ] || [ -z "$CERC_NITRO_CHAIN_URL" ]; then
+  echo "You most set both CERC_NITRO_CHAIN_PK and CERC_NITRO_CHAIN_URL." 1>&2
+  exit 1
+fi
+
+nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  NA_ADDRESS=${CERC_NA_ADDRESS}
+  VPA_ADDRESS=${CERC_VPA_ADDRESS}
+  CA_ADDRESS=${CERC_CA_ADDRESS}
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Reading Nitro addresses from ${nitro_addresses_file}"
+
+  NA_ADDRESS=$(jq -r '.nitroAdjudicatorAddress' ${nitro_addresses_file})
+  VPA_ADDRESS=$(jq -r '.virtualPaymentAppAddress' ${nitro_addresses_file})
+  CA_ADDRESS=$(jq -r '.consensusAppAddress' ${nitro_addresses_file})
+else
+  echo "File ${nitro_addresses_file} not found"
+  exit 1
+fi
+
+cd /app/packages/example-web-app
+cat > .env <<EOF
+REACT_APP_RPC_URL=${CERC_RUNTIME_ENV_RPC_URL:-$CERC_NITRO_CHAIN_URL}
+REACT_APP_TARGET_URL=${CERC_RUNTIME_ENV_TARGET_URL:-$CERC_NITRO_TARGET_URL}
+REACT_APP_NITRO_PK=${CERC_NITRO_PK:-$CERC_NITRO_CHAIN_PK}
+REACT_APP_NA_ADDRESS=${NA_ADDRESS}
+REACT_APP_VPA_ADDRESS=${VPA_ADDRESS}
+REACT_APP_CA_ADDRESS=${CA_ADDRESS}
+EOF
+
+yarn start

stack_orchestrator/data/container-build/cerc-fixturenet-eth-geth/run-el.sh

@@ -6,7 +6,7 @@ fi
 
 ETHERBASE=`cat /opt/testnet/build/el/accounts.csv | head -1 | cut -d',' -f2`
 NETWORK_ID=`cat /opt/testnet/el/el-config.yaml | grep 'chain_id' | awk '{ print $2 }'`
-NETRESTRICT=`ip addr | grep inet | grep -v '127.0' | awk '{print $2}'`
+NETRESTRICT=`ip addr | grep 'inet ' | grep -v '127.0' | head -1 | awk '{print $2}'`
 CERC_ETH_DATADIR="${CERC_ETH_DATADIR:-$HOME/ethdata}"
 CERC_PLUGINS_DIR="${CERC_PLUGINS_DIR:-/usr/local/lib/plugeth}"
 

stack_orchestrator/data/container-build/cerc-go-nitro/Dockerfile

@@ -8,9 +8,30 @@ COPY . .
 RUN go build -v -o nitro .
 
 # Reduce image size
-FROM debian:bullseye-slim
+FROM node:18-bullseye-slim as builder-node
 RUN apt-get update
-RUN apt-get install -y ca-certificates jq netcat
+RUN apt-get install -y make
+WORKDIR /app
+COPY . .
+RUN find . -name 'node_modules' | xargs -n1 rm -rf
+RUN find . -name 'dist' | xargs -n1 rm -rf
+RUN yarn
+WORKDIR /app/packages/nitro-gui
+RUN VITE_RPC_HOST=CERC_RUNTIME_ENV_RPC_HOST yarn build
+RUN if [ -d /app/packages/nitro-auth-gui ]; then \
+  cd /app/packages/nitro-auth-gui && \
+    VITE_RPC_URL=CERC_RUNTIME_ENV_RPC_URL VITE_TARGET_URL=CERC_RUNTIME_ENV_TARGET_URL yarn build; \
+  fi
+WORKDIR /app/packages/nitro-auth
+RUN if [ -d /app/packages/nitro-auth ]; then cd /app/packages/nitro-auth && yarn build; fi
+
+FROM node:18-bullseye-slim
+RUN apt-get update
+RUN apt-get install -y ca-certificates jq netcat make curl wget
 RUN rm -rf /var/lib/apt/lists/*
+RUN npm install -g http-server
+RUN npm config set @cerc-io:registry https://git.vdb.to/api/packages/cerc-io/npm/
+RUN npm install -g @cerc-io/peer
 WORKDIR /app
 COPY --from=builder /app/nitro .
+COPY --from=builder-node /app /app-node

stack_orchestrator/data/container-build/cerc-laconic-registry-cli/import-key.sh

@@ -1,2 +1,2 @@
 #!/bin/sh
-sed 's/REPLACE_WITH_MYKEY/'${1}'/' /registry-cli-config/registry-cli-config-template.yml > config.yml
+sed 's/REPLACE_WITH_MYKEY/'${1}'/' registry-cli-config-template.yml > config.yml

stack_orchestrator/data/container-build/cerc-mars-v2/build.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+# Build the mars-v2 image
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+docker build -t cerc/mars-v2:local -f ${CERC_REPO_BASE_DIR}/mars-v2-frontend/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/mars-v2-frontend

stack_orchestrator/data/container-build/cerc-mars/build.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+# Build the mars image
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+docker build -t cerc/mars:local -f ${CERC_REPO_BASE_DIR}/mars-interface/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/mars-interface

stack_orchestrator/data/container-build/cerc-nextjs-base/Dockerfile

@@ -26,6 +26,8 @@ RUN \
     && su ${USERNAME} -c "umask 0002 && npm install -g eslint" \
     # Install semver
     && su ${USERNAME} -c "umask 0002 && npm install -g semver" \
+    # Install pnpm
+    && su ${USERNAME} -c "umask 0002 && npm install -g pnpm" \
     && npm cache clean --force > /dev/null 2>&1
 
 # [Optional] Uncomment this section to install additional OS packages.
@@ -35,6 +37,9 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
 # [Optional] Uncomment if you want to install more global node modules
 # RUN su node -c "npm install -g <your-package-list-here>"
 
+# We do this to get a yq binary from the published container, for the correct architecture we're building here
+COPY --from=docker.io/mikefarah/yq:latest /usr/bin/yq /usr/local/bin/yq
+
 # Expose port for http
 EXPOSE 80
 

stack_orchestrator/data/container-build/cerc-nextjs-base/build.sh

@@ -11,8 +11,14 @@ CERC_CONTAINER_BUILD_DOCKERFILE=${CERC_CONTAINER_BUILD_DOCKERFILE:-$SCRIPT_DIR/D
 CERC_CONTAINER_BUILD_TAG=${CERC_CONTAINER_BUILD_TAG:-cerc/nextjs-base:local}
 
 docker build -t $CERC_CONTAINER_BUILD_TAG ${build_command_args} -f $CERC_CONTAINER_BUILD_DOCKERFILE $CERC_CONTAINER_BUILD_WORK_DIR
+rc=$?
 
-if [ $? -eq 0 ] && [ "$CERC_CONTAINER_BUILD_TAG" != "cerc/nextjs-base:local" ]; then
+if [ $rc -ne 0 ]; then
+  echo "BUILD FAILED" 1>&2
+  exit $rc
+fi
+
+if [ "$CERC_CONTAINER_BUILD_TAG" != "cerc/nextjs-base:local" ]; then
   cat <<EOF
 
 #################################################################

stack_orchestrator/data/container-build/cerc-nextjs-base/scripts/apply-runtime-env.sh

@@ -10,10 +10,12 @@ TRG_DIR="${3:-.next-r}"
 
 CERC_BUILD_TOOL="${CERC_BUILD_TOOL}"
 if [ -z "$CERC_BUILD_TOOL" ]; then
-  if [ -f "yarn.lock" ]; then
-    CERC_BUILD_TOOL=npm
-  else
+  if [ -f "pnpm-lock.yaml" ]; then
+    CERC_BUILD_TOOL=pnpm
+  elif [ -f "yarn.lock" ]; then
     CERC_BUILD_TOOL=yarn
+  else
+    CERC_BUILD_TOOL=npm
   fi
 fi
 
@@ -33,8 +35,8 @@ if [ -f ".env" ]; then
   rm -f $TMP_ENV
 fi
 
-for f in $(find "$TRG_DIR" -regex ".*.[tj]sx?$" -type f | grep -v 'node_modules'); do
-  for e in $(cat "${f}" | tr -s '[:blank:]' '\n' | tr -s '[{},();]' '\n' | egrep -o '^"CERC_RUNTIME_ENV_[^\"]+"'); do
+for f in $(find . -type f \( -regex '.*.html?' -or -regex ".*.[tj]s\(x\|on\)?$" \) | grep -v 'node_modules' | grep -v '.git'); do
+  for e in $(cat "${f}" | tr -s '[:blank:]' '\n' | tr -s '["/\\{},();]' '\n' | tr -s "[']" '\n' | egrep -o -e '^CERC_RUNTIME_ENV_.+$' -e '^LACONIC_HOSTED_CONFIG_.+$'); do
     orig_name=$(echo -n "${e}" | sed 's/"//g')
     cur_name=$(echo -n "${orig_name}" | sed 's/CERC_RUNTIME_ENV_//g')
     cur_val=$(echo -n "\$${cur_name}" | envsubst)

stack_orchestrator/data/container-build/cerc-nextjs-base/scripts/build-app.sh

@@ -9,7 +9,9 @@ CERC_MIN_NEXTVER=13.4.2
 CERC_NEXT_VERSION="${CERC_NEXT_VERSION:-keep}"
 CERC_BUILD_TOOL="${CERC_BUILD_TOOL}"
 if [ -z "$CERC_BUILD_TOOL" ]; then
-  if [ -f "yarn.lock" ]; then
+  if [ -f "pnpm-lock.yaml" ]; then
+    CERC_BUILD_TOOL=pnpm
+  elif [ -f "yarn.lock" ]; then
     CERC_BUILD_TOOL=yarn
   else
     CERC_BUILD_TOOL=npm
@@ -113,7 +115,7 @@ if [ "$CERC_NEXT_VERSION" != "keep" ] && [ "$CUR_NEXT_VERSION" != "$CERC_NEXT_VE
   mv package.json.$$ package.json
 fi
 
-$CERC_BUILD_TOOL install || exit 1
+time $CERC_BUILD_TOOL install || exit 1
 
 CUR_NEXT_VERSION=`jq -r '.version' node_modules/next/package.json`
 
@@ -136,9 +138,9 @@ to use for the build with:
 EOF
   cat package.json | jq ".dependencies.next = \"^$CERC_MIN_NEXTVER\"" > package.json.$$
   mv package.json.$$ package.json
-  $CERC_BUILD_TOOL install || exit 1
+  time $CERC_BUILD_TOOL install || exit 1
 fi
 
-$CERC_BUILD_TOOL run cerc_compile || exit 1
+time $CERC_BUILD_TOOL run cerc_compile || exit 1
 
 exit 0

stack_orchestrator/data/container-build/cerc-nextjs-base/scripts/start-serving-app.sh

@@ -16,7 +16,9 @@ trap ctrl_c INT
 
 CERC_BUILD_TOOL="${CERC_BUILD_TOOL}"
 if [ -z "$CERC_BUILD_TOOL" ]; then
-  if [ -f "yarn.lock" ] && [ ! -f "package-lock.json" ]; then
+  if [ -f "pnpm-lock.yaml" ]; then
+    CERC_BUILD_TOOL=pnpm
+  elif [ -f "yarn.lock" ]; then
     CERC_BUILD_TOOL=yarn
   else
     CERC_BUILD_TOOL=npm

stack_orchestrator/data/container-build/cerc-nitro-rpc-client/Dockerfile

@@ -4,9 +4,10 @@ RUN apk --update --no-cache add python3 alpine-sdk bash curl jq
 
 WORKDIR /app
 
-COPY . .
+COPY packages/nitro-rpc-client  .
 
 RUN echo "Installing dependencies" && \
   yarn
 
-RUN cd packages/nitro-rpc-client
+RUN yarn build
+RUN ln -s /app/bin/nitro-rpc-client.js /bin/nitro-rpc-client

stack_orchestrator/data/container-build/cerc-ping-pub/build.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+# Build the ping pub image
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+docker build -t cerc/ping-pub:local ${build_command_args} -f $CERC_REPO_BASE_DIR/explorer/Dockerfile $CERC_REPO_BASE_DIR/explorer

stack_orchestrator/data/container-build/cerc-snowballtools-base-backend/Dockerfile

@@ -0,0 +1,6 @@
+FROM cerc/snowballtools-base-backend-base:local
+
+WORKDIR /app/packages/backend
+COPY run.sh .
+
+ENTRYPOINT ["./run.sh"]

stack_orchestrator/data/container-build/cerc-snowballtools-base-backend/Dockerfile-base

@@ -0,0 +1,26 @@
+FROM ubuntu:22.04 as builder
+
+RUN apt update && \
+      apt install -y --no-install-recommends --no-install-suggests \
+      ca-certificates curl gnupg
+
+# Node
+ARG NODE_MAJOR=20
+RUN curl -fsSL https://deb.nodesource.com/gpgkey/nodesource-repo.gpg.key | gpg --dearmor -o /etc/apt/keyrings/nodesource.gpg && \
+      echo "deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_$NODE_MAJOR.x nodistro main" | tee /etc/apt/sources.list.d/nodesource.list && \
+      apt update && apt install -y nodejs
+
+# npm setup
+RUN npm config set @cerc-io:registry https://git.vdb.to/api/packages/cerc-io/npm/ && npm install -g yarn
+
+COPY . /app/
+WORKDIR /app/
+
+RUN find . -name 'node_modules' | xargs -n1 rm -rf
+RUN yarn && yarn build --ignore frontend
+
+FROM cerc/webapp-base:local
+
+COPY --from=builder /app /app
+
+WORKDIR /app/packages/backend

stack_orchestrator/data/container-build/cerc-snowballtools-base-backend/build.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+# Build cerc/webapp-deployer-backend
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/snowballtools-base-backend-base:local ${build_command_args} -f ${SCRIPT_DIR}/Dockerfile-base ${CERC_REPO_BASE_DIR}/snowballtools-base
+docker build -t cerc/snowballtools-base-backend:local ${build_command_args} ${SCRIPT_DIR} 

stack_orchestrator/data/container-build/cerc-snowballtools-base-backend/run.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+
+LACONIC_HOSTED_CONFIG_FILE=${LACONIC_HOSTED_CONFIG_FILE}
+if [ -z "${LACONIC_HOSTED_CONFIG_FILE}" ]; then
+  if [ -f "/config/laconic-hosted-config.yml" ]; then
+    LACONIC_HOSTED_CONFIG_FILE="/config/laconic-hosted-config.yml"
+  elif [ -f "/config/config.yml" ]; then
+    LACONIC_HOSTED_CONFIG_FILE="/config/config.yml"
+  fi
+fi
+
+if [ -f "${LACONIC_HOSTED_CONFIG_FILE}" ]; then
+  /scripts/apply-webapp-config.sh $LACONIC_HOSTED_CONFIG_FILE "`pwd`/dist"
+fi
+
+/scripts/apply-runtime-env.sh "`pwd`/dist"
+
+yarn start

stack_orchestrator/data/container-build/cerc-test-container/run.sh

@@ -1,22 +1,53 @@
 #!/usr/bin/env bash
 set -e
+
 if [ -n "$CERC_SCRIPT_DEBUG" ]; then
   set -x
 fi
-# Test if the container's filesystem is old (run previously) or new
-EXISTSFILENAME=/data/exists
+
 echo "Test container starting"
-if [[ -f "$EXISTSFILENAME" ]];
-then
-    TIMESTAMP=`cat $EXISTSFILENAME`
-    echo "Filesystem is old, created: $TIMESTAMP" 
+
+DATA_DEVICE=$(df | grep "/data$" | awk '{ print $1 }')
+if [[ -n "$DATA_DEVICE" ]]; then
+  echo "/data: MOUNTED dev=${DATA_DEVICE}"
 else
-    echo "Filesystem is fresh"
-    echo `date` > $EXISTSFILENAME
+  echo "/data: not mounted"
 fi
+
+DATA2_DEVICE=$(df | grep "/data2$" | awk '{ print $1 }')
+if [[ -n "$DATA_DEVICE" ]]; then
+  echo "/data2: MOUNTED dev=${DATA2_DEVICE}"
+else
+  echo "/data2: not mounted"
+fi
+
+# Test if the container's filesystem is old (run previously) or new
+for d in /data /data2; do
+  if [[ -f "$d/exists" ]];
+  then
+      TIMESTAMP=`cat $d/exists`
+      echo "$d filesystem is old, created: $TIMESTAMP"
+  else
+      echo "$d filesystem is fresh"
+      echo `date` > $d/exists
+  fi
+done
+
 if [ -n "$CERC_TEST_PARAM_1" ]; then
   echo "Test-param-1: ${CERC_TEST_PARAM_1}"
 fi
+if [ -n "$CERC_TEST_PARAM_2" ]; then
+  echo "Test-param-2: ${CERC_TEST_PARAM_2}"
+fi
+if [ -n "$CERC_TEST_PARAM_3" ]; then
+  echo "Test-param-3: ${CERC_TEST_PARAM_3}"
+fi
+if [ -n "$CERC_TEST_PARAM_4" ]; then
+  echo "Test-param-4: ${CERC_TEST_PARAM_4}"
+fi
+if [ -n "$CERC_TEST_PARAM_5" ]; then
+  echo "Test-param-5: ${CERC_TEST_PARAM_5}"
+fi
 
 if [ -d "/config" ]; then
   echo "/config: EXISTS"

stack_orchestrator/data/container-build/cerc-test-database-client/Dockerfile

@@ -0,0 +1,12 @@
+FROM ubuntu:latest
+
+RUN apt-get update && export DEBIAN_FRONTEND=noninteractive && export DEBCONF_NOWARNINGS="yes" && \
+    apt-get install -y software-properties-common && \
+    apt-get install -y postgresql-client && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+EXPOSE 80
+
+COPY run.sh /app/run.sh
+
+ENTRYPOINT ["/app/run.sh"]

stack_orchestrator/data/container-build/cerc-test-database-client/build.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+# Build cerc/test-container
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+docker build -t cerc/test-database-client:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} $SCRIPT_DIR

stack_orchestrator/data/container-build/cerc-test-database-client/run.sh

@@ -0,0 +1,71 @@
+#!/usr/bin/env bash
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+# TODO derive this from config
+database_url="postgresql://test-user:password@localhost:5432/test-db"
+psql_command="psql ${database_url}"
+program_name="Database test client:"
+
+wait_for_database_up () {
+    for i in {1..50}
+    do
+        ${psql_command} -c "select 1;"
+        psql_succeeded=$?
+        if [[ ${psql_succeeded} == 0 ]]; then
+            # if ready, return
+            echo "${program_name} database up"
+            return
+        else
+            # if not ready, wait
+            echo "${program_name} waiting for database: ${i}"
+            sleep 5
+        fi
+    done
+    # Timed out, error exit
+    echo "${program_name} waiting for database: FAILED"
+    exit 1
+}
+
+# Used to synchronize with the test runner
+notify_test_complete () {
+    echo "${program_name} test complete"
+}
+
+does_test_data_exist () {
+    query_result=$(${psql_command} -t -c "select count(*) from test_table_1 where key_column = 'test_key_1';" | head -1 | tr -d ' ')
+    if [[ "${query_result}" == "1" ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+create_test_data () {
+    ${psql_command} -c "create table test_table_1 (key_column text, value_column text, primary key(key_column));"
+    ${psql_command} -c "insert into test_table_1 values ('test_key_1', 'test_value_1');"
+}
+
+wait_forever() {
+    # Loop to keep docker/k8s happy since this is the container entrypoint
+    while :; do sleep 600; done
+}
+
+wait_for_database_up
+
+# Check if the test database content exists already
+if does_test_data_exist; then
+    # If so, log saying so. Test harness will look for this log output
+    echo "${program_name} test data already exists"
+else
+    # Otherwise log saying the content was not present
+    echo "${program_name} test data does not exist"
+    echo "${program_name} creating test data"
+    # then create it
+    create_test_data
+fi
+
+notify_test_complete
+wait_forever

stack_orchestrator/data/container-build/cerc-test-database-container/Dockerfile

@@ -0,0 +1,3 @@
+FROM postgres:16-bullseye
+
+EXPOSE 5432

stack_orchestrator/data/container-build/cerc-test-database-container/build.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+# Build cerc/test-container
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+docker build -t cerc/test-database-container:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} $SCRIPT_DIR

stack_orchestrator/data/container-build/cerc-ts-nitro/Dockerfile

@@ -0,0 +1,12 @@
+FROM node:18.17.1-alpine3.18
+
+RUN apk --update --no-cache add python3 alpine-sdk bash curl jq
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies" && \
+  yarn && yarn build:node && yarn build:browser
+
+WORKDIR /app

stack_orchestrator/data/container-build/cerc-ts-nitro/build.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/ts-nitro
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/ts-nitro:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/ts-nitro

stack_orchestrator/data/container-build/cerc-webapp-base/Dockerfile

@@ -1,6 +1,6 @@
 # Originally from: https://github.com/devcontainers/images/blob/main/src/javascript-node/.devcontainer/Dockerfile
 # [Choice] Node.js version (use -bullseye variants on local arm64/Apple Silicon): 18, 16, 14, 18-bullseye, 16-bullseye, 14-bullseye, 18-buster, 16-buster, 14-buster
-ARG VARIANT=20-bullseye
+ARG VARIANT=20-bullseye-slim
 FROM node:${VARIANT}
 
 ARG USERNAME=node
@@ -24,6 +24,10 @@ RUN \
     && su ${USERNAME} -c "npm config -g set prefix ${NPM_GLOBAL}" \
     # Install eslint
     && su ${USERNAME} -c "umask 0002 && npm install -g eslint" \
+    # Install semver
+    && su ${USERNAME} -c "umask 0002 && npm install -g semver" \
+    # Install pnpm
+    && su ${USERNAME} -c "umask 0002 && npm install -g pnpm" \
     && npm cache clean --force > /dev/null 2>&1
 
 # [Optional] Uncomment this section to install additional OS packages.
@@ -43,7 +47,6 @@ COPY scripts /scripts
 # RUN su node -c "npm install -g <your-package-list-here>"
 
 RUN mkdir -p /config
-COPY ./config.yml /config
 
 # Install simple web server for now (use nginx perhaps later)
 RUN yarn global add http-server

stack_orchestrator/data/container-build/cerc-webapp-base/Dockerfile.webapp

@@ -1,11 +1,12 @@
 FROM cerc/webapp-base:local as builder
 
 ARG CERC_BUILD_TOOL
+ARG CERC_BUILD_OUTPUT_DIR
 
 WORKDIR /app
 COPY . .
-RUN rm -rf node_modules build .next*
-RUN /scripts/build-app.sh /app build /data
+RUN rm -rf node_modules build dist .next*
+RUN /scripts/build-app.sh /app /data
 
 FROM cerc/webapp-base:local
 COPY --from=builder /data /data

stack_orchestrator/data/container-build/cerc-webapp-base/build.sh

@@ -11,8 +11,14 @@ CERC_CONTAINER_BUILD_DOCKERFILE=${CERC_CONTAINER_BUILD_DOCKERFILE:-$SCRIPT_DIR/D
 CERC_CONTAINER_BUILD_TAG=${CERC_CONTAINER_BUILD_TAG:-cerc/webapp-base:local}
 
 docker build -t $CERC_CONTAINER_BUILD_TAG ${build_command_args} -f $CERC_CONTAINER_BUILD_DOCKERFILE $CERC_CONTAINER_BUILD_WORK_DIR
+rc=$?
 
-if [ $? -eq 0 ] && [ "$CERC_CONTAINER_BUILD_TAG" != "cerc/webapp-base:local" ]; then
+if [ $rc -ne 0 ]; then
+  echo "BUILD FAILED" 1>&2
+  exit $rc
+fi
+
+if [ "$CERC_CONTAINER_BUILD_TAG" != "cerc/webapp-base:local" ]; then
   cat <<EOF
 
 #################################################################

stack_orchestrator/data/container-build/cerc-webapp-base/config.yml

@@ -1 +0,0 @@
-# Put config here.

stack_orchestrator/data/container-build/cerc-webapp-base/scripts/apply-runtime-env.sh

@@ -18,8 +18,8 @@ if [ -f ".env" ]; then
   rm -f $TMP_ENV
 fi
 
-for f in $(find . -regex ".*.[tj]sx?$" -type f | grep -v 'node_modules'); do
-  for e in $(cat "${f}" | tr -s '[:blank:]' '\n' | tr -s '[{},();]' '\n' | egrep -o -e '^"CERC_RUNTIME_ENV_[^\"]+"' -e '^"LACONIC_HOSTED_CONFIG_[^\"]+"'); do
+for f in $(find . -type f \( -regex '.*.html?' -or -regex ".*.[tj]s\(x\|on\)?$" \) | grep -v 'node_modules' | grep -v '.git'); do
+  for e in $(cat "${f}" | tr -s '[:blank:]' '\n' | tr -s '["/\\{},();]' '\n' | tr -s "[']" '\n' | egrep -o -e '^CERC_RUNTIME_ENV_.+$' -e '^LACONIC_HOSTED_CONFIG_.+$'); do
     orig_name=$(echo -n "${e}" | sed 's/"//g')
     cur_name=$(echo -n "${orig_name}" | sed 's/CERC_RUNTIME_ENV_//g')
     cur_val=$(echo -n "\$${cur_name}" | envsubst)

stack_orchestrator/data/container-build/cerc-webapp-base/scripts/build-app.sh

@@ -7,30 +7,55 @@ if [ -n "$CERC_SCRIPT_DEBUG" ]; then
 fi
 
 CERC_BUILD_TOOL="${CERC_BUILD_TOOL}"
-WORK_DIR="${1:-/app}"
-OUTPUT_DIR="${2:-build}"
-DEST_DIR="${3:-/data}"
+CERC_BUILD_OUTPUT_DIR="${CERC_BUILD_OUTPUT_DIR}"
 
-if [ -f "${WORK_DIR}/package.json" ]; then
+WORK_DIR="${1:-/app}"
+DEST_DIR="${2:-/data}"
+
+if [ -f "${WORK_DIR}/build-webapp.sh" ]; then
+  echo "Building webapp with ${WORK_DIR}/build-webapp.sh ..."
+  cd "${WORK_DIR}" || exit 1
+
+  rm -rf "${DEST_DIR}"
+  ./build-webapp.sh "${DEST_DIR}" || exit 1
+elif [ -f "${WORK_DIR}/package.json" ]; then
   echo "Building node-based webapp ..."
   cd "${WORK_DIR}" || exit 1
 
   if [ -z "$CERC_BUILD_TOOL" ]; then
-    if [ -f "yarn.lock" ]; then
+    if [ -f "pnpm-lock.yaml" ]; then
+      CERC_BUILD_TOOL=pnpm
+    elif [ -f "yarn.lock" ]; then
       CERC_BUILD_TOOL=yarn
     else
       CERC_BUILD_TOOL=npm
     fi
   fi
 
-  $CERC_BUILD_TOOL install || exit 1
-  $CERC_BUILD_TOOL build || exit 1
+  time $CERC_BUILD_TOOL install || exit 1
+  time $CERC_BUILD_TOOL build || exit 1
 
   rm -rf "${DEST_DIR}"
-  mv "${WORK_DIR}/${OUTPUT_DIR}" "${DEST_DIR}"
+  if [ -z "${CERC_BUILD_OUTPUT_DIR}" ]; then
+    if [ -d "${WORK_DIR}/dist" ]; then
+      CERC_BUILD_OUTPUT_DIR="${WORK_DIR}/dist"
+    elif [ -d "${WORK_DIR}/build" ]; then
+      CERC_BUILD_OUTPUT_DIR="${WORK_DIR}/build"
+    else
+      echo "ERROR: Unable to locate build output.  Set with --extra-build-args \"--build-arg CERC_BUILD_OUTPUT_DIR=path\"" 1>&2
+      exit 1
+    fi
+  fi
+  mv "${CERC_BUILD_OUTPUT_DIR}" "${DEST_DIR}"
 else
   echo "Copying static app ..."
   mv "${WORK_DIR}" "${DEST_DIR}"
 fi
 
+# One special fix ...
+cd "${DEST_DIR}"
+for f in $(find . -type f -name '*.htm*'); do
+  sed -i -e 's#/LACONIC_HOSTED_CONFIG_homepage/#LACONIC_HOSTED_CONFIG_homepage/#g' "$f"
+done
+
 exit 0

stack_orchestrator/data/container-build/cerc-webapp-base/scripts/start-serving-app.sh

@@ -3,13 +3,40 @@ if [ -n "$CERC_SCRIPT_DEBUG" ]; then
     set -x
 fi
 
+CERC_LISTEN_PORT=${CERC_LISTEN_PORT:-80}
 CERC_WEBAPP_FILES_DIR="${CERC_WEBAPP_FILES_DIR:-/data}"
 CERC_ENABLE_CORS="${CERC_ENABLE_CORS:-false}"
+CERC_SINGLE_PAGE_APP="${CERC_SINGLE_PAGE_APP}"
+
+if [ -z "${CERC_SINGLE_PAGE_APP}" ]; then
+  if [ 1 -eq $(find "${CERC_WEBAPP_FILES_DIR}" -name '*.html' | wc -l) ] && [ -d "${CERC_WEBAPP_FILES_DIR}/static" ]; then
+    CERC_SINGLE_PAGE_APP=true
+  else
+    CERC_SINGLE_PAGE_APP=false
+  fi
+fi
 
 if [ "true" == "$CERC_ENABLE_CORS" ]; then
   CERC_HTTP_EXTRA_ARGS="$CERC_HTTP_EXTRA_ARGS --cors"
 fi
 
-/scripts/apply-webapp-config.sh /config/config.yml ${CERC_WEBAPP_FILES_DIR}
+if [ "true" == "$CERC_SINGLE_PAGE_APP" ]; then
+  # Create a catchall redirect back to /
+  CERC_HTTP_EXTRA_ARGS="$CERC_HTTP_EXTRA_ARGS --proxy http://localhost:${CERC_LISTEN_PORT}?"
+fi
+
+LACONIC_HOSTED_CONFIG_FILE=${LACONIC_HOSTED_CONFIG_FILE}
+if [ -z "${LACONIC_HOSTED_CONFIG_FILE}" ]; then
+  if [ -f "/config/laconic-hosted-config.yml" ]; then
+    LACONIC_HOSTED_CONFIG_FILE="/config/laconic-hosted-config.yml"
+  elif [ -f "/config/config.yml" ]; then
+    LACONIC_HOSTED_CONFIG_FILE="/config/config.yml"
+  fi
+fi
+
+if [ -f "${LACONIC_HOSTED_CONFIG_FILE}" ]; then
+  /scripts/apply-webapp-config.sh $LACONIC_HOSTED_CONFIG_FILE "${CERC_WEBAPP_FILES_DIR}"
+fi
+
 /scripts/apply-runtime-env.sh ${CERC_WEBAPP_FILES_DIR}
-http-server $CERC_HTTP_EXTRA_ARGS -p ${CERC_LISTEN_PORT:-80} ${CERC_WEBAPP_FILES_DIR}
+http-server $CERC_HTTP_EXTRA_ARGS -p ${CERC_LISTEN_PORT} "${CERC_WEBAPP_FILES_DIR}"

stack_orchestrator/data/k8s/components/ingress/ingress-nginx-kind-deploy.yaml

@@ -0,0 +1,673 @@
+# from: https://raw.githubusercontent.com/kubernetes/ingress-nginx/main/deploy/static/provider/kind/deploy.yaml
+# via: https://kind.sigs.k8s.io/docs/user/ingress/#ingress-nginx
+apiVersion: v1
+kind: Namespace
+metadata:
+  labels:
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+  name: ingress-nginx
+---
+apiVersion: v1
+automountServiceAccountToken: true
+kind: ServiceAccount
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx
+  namespace: ingress-nginx
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission
+  namespace: ingress-nginx
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: Role
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx
+  namespace: ingress-nginx
+rules:
+- apiGroups:
+  - ""
+  resources:
+  - namespaces
+  verbs:
+  - get
+- apiGroups:
+  - ""
+  resources:
+  - configmaps
+  - pods
+  - secrets
+  - endpoints
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - ""
+  resources:
+  - services
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - networking.k8s.io
+  resources:
+  - ingresses
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - networking.k8s.io
+  resources:
+  - ingresses/status
+  verbs:
+  - update
+- apiGroups:
+  - networking.k8s.io
+  resources:
+  - ingressclasses
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - coordination.k8s.io
+  resourceNames:
+  - ingress-nginx-leader
+  resources:
+  - leases
+  verbs:
+  - get
+  - update
+- apiGroups:
+  - coordination.k8s.io
+  resources:
+  - leases
+  verbs:
+  - create
+- apiGroups:
+  - ""
+  resources:
+  - events
+  verbs:
+  - create
+  - patch
+- apiGroups:
+  - discovery.k8s.io
+  resources:
+  - endpointslices
+  verbs:
+  - list
+  - watch
+  - get
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: Role
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission
+  namespace: ingress-nginx
+rules:
+- apiGroups:
+  - ""
+  resources:
+  - secrets
+  verbs:
+  - get
+  - create
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  labels:
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx
+rules:
+- apiGroups:
+  - ""
+  resources:
+  - configmaps
+  - endpoints
+  - nodes
+  - pods
+  - secrets
+  - namespaces
+  verbs:
+  - list
+  - watch
+- apiGroups:
+  - coordination.k8s.io
+  resources:
+  - leases
+  verbs:
+  - list
+  - watch
+- apiGroups:
+  - ""
+  resources:
+  - nodes
+  verbs:
+  - get
+- apiGroups:
+  - ""
+  resources:
+  - services
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - networking.k8s.io
+  resources:
+  - ingresses
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - ""
+  resources:
+  - events
+  verbs:
+  - create
+  - patch
+- apiGroups:
+  - networking.k8s.io
+  resources:
+  - ingresses/status
+  verbs:
+  - update
+- apiGroups:
+  - networking.k8s.io
+  resources:
+  - ingressclasses
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - discovery.k8s.io
+  resources:
+  - endpointslices
+  verbs:
+  - list
+  - watch
+  - get
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission
+rules:
+- apiGroups:
+  - admissionregistration.k8s.io
+  resources:
+  - validatingwebhookconfigurations
+  verbs:
+  - get
+  - update
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: RoleBinding
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx
+  namespace: ingress-nginx
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: Role
+  name: ingress-nginx
+subjects:
+- kind: ServiceAccount
+  name: ingress-nginx
+  namespace: ingress-nginx
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: RoleBinding
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission
+  namespace: ingress-nginx
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: Role
+  name: ingress-nginx-admission
+subjects:
+- kind: ServiceAccount
+  name: ingress-nginx-admission
+  namespace: ingress-nginx
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  labels:
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: ingress-nginx
+subjects:
+- kind: ServiceAccount
+  name: ingress-nginx
+  namespace: ingress-nginx
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: ingress-nginx-admission
+subjects:
+- kind: ServiceAccount
+  name: ingress-nginx-admission
+  namespace: ingress-nginx
+---
+apiVersion: v1
+data:
+  allow-snippet-annotations: "false"
+kind: ConfigMap
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-controller
+  namespace: ingress-nginx
+---
+apiVersion: v1
+kind: Service
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-controller
+  namespace: ingress-nginx
+spec:
+  ipFamilies:
+  - IPv4
+  ipFamilyPolicy: SingleStack
+  ports:
+  - appProtocol: http
+    name: http
+    port: 80
+    protocol: TCP
+    targetPort: http
+  - appProtocol: https
+    name: https
+    port: 443
+    protocol: TCP
+    targetPort: https
+  selector:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+  type: NodePort
+---
+apiVersion: v1
+kind: Service
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-controller-admission
+  namespace: ingress-nginx
+spec:
+  ports:
+  - appProtocol: https
+    name: https-webhook
+    port: 443
+    targetPort: webhook
+  selector:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+  type: ClusterIP
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-controller
+  namespace: ingress-nginx
+spec:
+  minReadySeconds: 0
+  revisionHistoryLimit: 10
+  selector:
+    matchLabels:
+      app.kubernetes.io/component: controller
+      app.kubernetes.io/instance: ingress-nginx
+      app.kubernetes.io/name: ingress-nginx
+  strategy:
+    rollingUpdate:
+      maxUnavailable: 1
+    type: RollingUpdate
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/component: controller
+        app.kubernetes.io/instance: ingress-nginx
+        app.kubernetes.io/name: ingress-nginx
+        app.kubernetes.io/part-of: ingress-nginx
+        app.kubernetes.io/version: 1.9.6
+    spec:
+      containers:
+      - args:
+        - /nginx-ingress-controller
+        - --election-id=ingress-nginx-leader
+        - --controller-class=k8s.io/ingress-nginx
+        - --ingress-class=nginx
+        - --configmap=$(POD_NAMESPACE)/ingress-nginx-controller
+        - --validating-webhook=:8443
+        - --validating-webhook-certificate=/usr/local/certificates/cert
+        - --validating-webhook-key=/usr/local/certificates/key
+        - --watch-ingress-without-class=true
+        - --publish-status-address=localhost
+        env:
+        - name: POD_NAME
+          valueFrom:
+            fieldRef:
+              fieldPath: metadata.name
+        - name: POD_NAMESPACE
+          valueFrom:
+            fieldRef:
+              fieldPath: metadata.namespace
+        - name: LD_PRELOAD
+          value: /usr/local/lib/libmimalloc.so
+        image: registry.k8s.io/ingress-nginx/controller:v1.9.6@sha256:1405cc613bd95b2c6edd8b2a152510ae91c7e62aea4698500d23b2145960ab9c
+        imagePullPolicy: IfNotPresent
+        lifecycle:
+          preStop:
+            exec:
+              command:
+              - /wait-shutdown
+        livenessProbe:
+          failureThreshold: 5
+          httpGet:
+            path: /healthz
+            port: 10254
+            scheme: HTTP
+          initialDelaySeconds: 10
+          periodSeconds: 10
+          successThreshold: 1
+          timeoutSeconds: 1
+        name: controller
+        ports:
+        - containerPort: 80
+          hostPort: 80
+          name: http
+          protocol: TCP
+        - containerPort: 443
+          hostPort: 443
+          name: https
+          protocol: TCP
+        - containerPort: 8443
+          name: webhook
+          protocol: TCP
+        readinessProbe:
+          failureThreshold: 3
+          httpGet:
+            path: /healthz
+            port: 10254
+            scheme: HTTP
+          initialDelaySeconds: 10
+          periodSeconds: 10
+          successThreshold: 1
+          timeoutSeconds: 1
+        resources:
+          requests:
+            cpu: 100m
+            memory: 90Mi
+        securityContext:
+          allowPrivilegeEscalation: false
+          capabilities:
+            add:
+            - NET_BIND_SERVICE
+            drop:
+            - ALL
+          readOnlyRootFilesystem: false
+          runAsNonRoot: true
+          runAsUser: 101
+          seccompProfile:
+            type: RuntimeDefault
+        volumeMounts:
+        - mountPath: /usr/local/certificates/
+          name: webhook-cert
+          readOnly: true
+      dnsPolicy: ClusterFirst
+      nodeSelector:
+        ingress-ready: "true"
+        kubernetes.io/os: linux
+      serviceAccountName: ingress-nginx
+      terminationGracePeriodSeconds: 0
+      tolerations:
+      - effect: NoSchedule
+        key: node-role.kubernetes.io/master
+        operator: Equal
+      - effect: NoSchedule
+        key: node-role.kubernetes.io/control-plane
+        operator: Equal
+      volumes:
+      - name: webhook-cert
+        secret:
+          secretName: ingress-nginx-admission
+---
+apiVersion: batch/v1
+kind: Job
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission-create
+  namespace: ingress-nginx
+spec:
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/component: admission-webhook
+        app.kubernetes.io/instance: ingress-nginx
+        app.kubernetes.io/name: ingress-nginx
+        app.kubernetes.io/part-of: ingress-nginx
+        app.kubernetes.io/version: 1.9.6
+      name: ingress-nginx-admission-create
+    spec:
+      containers:
+      - args:
+        - create
+        - --host=ingress-nginx-controller-admission,ingress-nginx-controller-admission.$(POD_NAMESPACE).svc
+        - --namespace=$(POD_NAMESPACE)
+        - --secret-name=ingress-nginx-admission
+        env:
+        - name: POD_NAMESPACE
+          valueFrom:
+            fieldRef:
+              fieldPath: metadata.namespace
+        image: registry.k8s.io/ingress-nginx/kube-webhook-certgen:v20231226-1a7112e06@sha256:25d6a5f11211cc5c3f9f2bf552b585374af287b4debf693cacbe2da47daa5084
+        imagePullPolicy: IfNotPresent
+        name: create
+        securityContext:
+          allowPrivilegeEscalation: false
+          capabilities:
+            drop:
+            - ALL
+          readOnlyRootFilesystem: true
+          runAsNonRoot: true
+          runAsUser: 65532
+          seccompProfile:
+            type: RuntimeDefault
+      nodeSelector:
+        kubernetes.io/os: linux
+      restartPolicy: OnFailure
+      serviceAccountName: ingress-nginx-admission
+---
+apiVersion: batch/v1
+kind: Job
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission-patch
+  namespace: ingress-nginx
+spec:
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/component: admission-webhook
+        app.kubernetes.io/instance: ingress-nginx
+        app.kubernetes.io/name: ingress-nginx
+        app.kubernetes.io/part-of: ingress-nginx
+        app.kubernetes.io/version: 1.9.6
+      name: ingress-nginx-admission-patch
+    spec:
+      containers:
+      - args:
+        - patch
+        - --webhook-name=ingress-nginx-admission
+        - --namespace=$(POD_NAMESPACE)
+        - --patch-mutating=false
+        - --secret-name=ingress-nginx-admission
+        - --patch-failure-policy=Fail
+        env:
+        - name: POD_NAMESPACE
+          valueFrom:
+            fieldRef:
+              fieldPath: metadata.namespace
+        image: registry.k8s.io/ingress-nginx/kube-webhook-certgen:v20231226-1a7112e06@sha256:25d6a5f11211cc5c3f9f2bf552b585374af287b4debf693cacbe2da47daa5084
+        imagePullPolicy: IfNotPresent
+        name: patch
+        securityContext:
+          allowPrivilegeEscalation: false
+          capabilities:
+            drop:
+            - ALL
+          readOnlyRootFilesystem: true
+          runAsNonRoot: true
+          runAsUser: 65532
+          seccompProfile:
+            type: RuntimeDefault
+      nodeSelector:
+        kubernetes.io/os: linux
+      restartPolicy: OnFailure
+      serviceAccountName: ingress-nginx-admission
+---
+apiVersion: networking.k8s.io/v1
+kind: IngressClass
+metadata:
+  labels:
+    app.kubernetes.io/component: controller
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: nginx
+spec:
+  controller: k8s.io/ingress-nginx
+---
+apiVersion: admissionregistration.k8s.io/v1
+kind: ValidatingWebhookConfiguration
+metadata:
+  labels:
+    app.kubernetes.io/component: admission-webhook
+    app.kubernetes.io/instance: ingress-nginx
+    app.kubernetes.io/name: ingress-nginx
+    app.kubernetes.io/part-of: ingress-nginx
+    app.kubernetes.io/version: 1.9.6
+  name: ingress-nginx-admission
+webhooks:
+- admissionReviewVersions:
+  - v1
+  clientConfig:
+    service:
+      name: ingress-nginx-controller-admission
+      namespace: ingress-nginx
+      path: /networking/v1/ingresses
+  failurePolicy: Fail
+  matchPolicy: Equivalent
+  name: validate.nginx.ingress.kubernetes.io
+  rules:
+  - apiGroups:
+    - networking.k8s.io
+    apiVersions:
+    - v1
+    operations:
+    - CREATE
+    - UPDATE
+    resources:
+    - ingresses
+  sideEffects: None

stack_orchestrator/data/stacks/container-registry/README.md

@@ -0,0 +1,3 @@
+# Container Registry Stack
+
+Host a container image registry

stack_orchestrator/data/stacks/container-registry/stack.yml

@@ -0,0 +1,5 @@
+version: "1.0"
+name: container-registry
+description: "Container registry stack"
+pods:
+  - container-registry

stack_orchestrator/data/stacks/fixturenet-eth/README.md

@@ -1,6 +1,6 @@
 # fixturenet-eth
 
-Instructions for deploying a local a geth + lighthouse blockchain "fixturenet" for development and testing purposes using laconic-stack-orchestrator (the installation of which is covered [here](https://github.com/cerc-io/stack-orchestrator)):
+Instructions for deploying a local a geth + lighthouse blockchain "fixturenet" for development and testing purposes using laconic-stack-orchestrator (the installation of which is covered [here](https://git.vdb.to/cerc-io/stack-orchestrator)):
 
 ## Clone required repositories
 

stack_orchestrator/data/stacks/fixturenet-laconic-loaded/README.md

@@ -7,11 +7,11 @@ Instructions for deploying a local Laconic blockchain "fixturenet" for developme
 **Note:** For building some NPMs, access to the @lirewine repositories is required. If you don't have access, see [this tutorial](/docs/laconicd-fixturenet.md) to run this stack
 
 ## 1. Install Laconic Stack Orchestrator
-Installation is covered in detail [here](https://github.com/cerc-io/stack-orchestrator#user-mode) but if you're on Linux and already have docker installed it should be as simple as:
+Installation is covered in detail [here](https://git.vdb.to/cerc-io/stack-orchestrator#user-mode) but if you're on Linux and already have docker installed it should be as simple as:
 ```
 $ mkdir my-working-dir
 $ cd my-working-dir
-$ curl -L -o ./laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+$ curl -L -o ./laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 $ chmod +x ./laconic-so
 $ export PATH=$PATH:$(pwd)  # Or move laconic-so to ~/bin or your favorite on-path directory
 ```

stack_orchestrator/data/stacks/fixturenet-laconic-loaded/deploy/commands.py

@@ -1,72 +0,0 @@
-# Copyright © 2022-2024 Vulcanize
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-from stack_orchestrator.util import get_yaml, get_config_file_dir
-from stack_orchestrator.deploy.deploy_types import DeployCommandContext
-from stack_orchestrator.deploy.deployment_context import DeploymentContext
-from pathlib import Path
-from shutil import copy
-
-default_spec_file_content = ""
-
-
-def _stack_config_dir(context: DeploymentContext) -> Path:
-    return get_config_file_dir().joinpath(context.stack.name)
-
-
-def _deployment_volume_dir(context: DeploymentContext, volume_name: str) -> Path:
-    return context.deployment_dir.joinpath("data", volume_name)
-
-
-def _copy_laconicd_scripts(context: DeploymentContext):
-    scripts = [
-        "create-fixturenet.sh",
-        "export-mykey.sh",
-        "export-myaddress.sh"
-    ]
-    destination_dir = _deployment_volume_dir(context, "laconicd-scripts")
-    for script in scripts:
-        # ../config/fixturenet-laconicd/
-        source_file = _stack_config_dir(context).joinpath(script)
-        copy(source_file, destination_dir)
-
-
-def _copy_cli_template(context: DeploymentContext):
-    destination_dir = _deployment_volume_dir(context, "cli-config")
-    # ../config/fixturenet-laconicd/
-    source_file = _stack_config_dir(context).joinpath("registry-cli-config-template.yml")
-    copy(source_file, destination_dir)
-
-
-def setup(command_context: DeployCommandContext, parameters, extra_args):
-    pass
-
-
-def init(command_context: DeployCommandContext):
-    yaml = get_yaml()
-    return yaml.load(default_spec_file_content)
-
-
-def create(context: DeploymentContext, extra_args):
-    _copy_laconicd_scripts(context)
-    _copy_cli_template(context)
-
-
-def get_state(command_context: DeployCommandContext):
-    pass
-
-
-def change_state(command_context: DeployCommandContext):
-    pass

stack_orchestrator/data/stacks/fixturenet-laconicd/README.md

@@ -3,11 +3,11 @@
 Instructions for deploying a local Laconic blockchain "fixturenet" for development and testing purposes using laconic-stack-orchestrator.
 
 ## 1. Install Laconic Stack Orchestrator
-Installation is covered in detail [here](https://github.com/cerc-io/stack-orchestrator#user-mode) but if you're on Linux and already have docker installed it should be as simple as:
+Installation is covered in detail [here](https://git.vdb.to/cerc-io/stack-orchestrator#user-mode) but if you're on Linux and already have docker installed it should be as simple as:
 ```
 $ mkdir my-working-dir
 $ cd my-working-dir
-$ curl -L -o ./laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+$ curl -L -o ./laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 $ chmod +x ./laconic-so
 $ export PATH=$PATH:$(pwd)  # Or move laconic-so to ~/bin or your favorite on-path directory
 ```

stack_orchestrator/data/stacks/mars-v2/README.md

@@ -0,0 +1,16 @@
+# mars
+
+On a fresh Digital Ocean droplet with Ubuntu:
+
+```
+git clone https://github.com/cerc-io/stack-orchestrator
+cd stack-orchestrator
+./scripts/quick-install-linux.sh
+```
+Read and follow the instructions output from the above output to complete installation, then:
+
+```
+laconic-so --stack mars-v2 setup-repositories
+laconic-so --stack mars-v2 build-containers
+laconic-so --stack mars-v2 deploy up
+```

stack_orchestrator/data/stacks/mars-v2/stack.yml

@@ -0,0 +1,8 @@
+version: "0.1"
+name: mars-v2
+repos:
+  - github.com/mars-protocol/mars-v2-frontend
+containers:
+  - cerc/mars-v2
+pods:
+  - mars-v2

stack_orchestrator/data/stacks/mars/README.md

@@ -0,0 +1,16 @@
+# mars
+
+On a fresh Digital Ocean droplet with Ubuntu:
+
+```
+git clone https://github.com/cerc-io/stack-orchestrator
+cd stack-orchestrator
+./scripts/quick-install-linux.sh
+```
+Read and follow the instructions output from the above output to complete installation, then:
+
+```
+laconic-so --stack mars setup-repositories
+laconic-so --stack mars build-containers
+laconic-so --stack mars deploy up
+```

stack_orchestrator/data/stacks/mars/stack.yml

@@ -0,0 +1,8 @@
+version: "0.1"
+name: mars
+repos:
+  - github.com/cerc-io/mars-interface
+containers:
+  - cerc/mars
+pods:
+  - mars

stack_orchestrator/data/stacks/mobymask/README.md

@@ -4,7 +4,7 @@ The MobyMask watcher is a Laconic Network component that provides efficient acce
 
 ## Deploy the MobyMask Watcher
 
-The instructions below show how to deploy a MobyMask watcher using laconic-stack-orchestrator (the installation of which is covered [here](https://github.com/cerc-io/stack-orchestrator#install)).
+The instructions below show how to deploy a MobyMask watcher using laconic-stack-orchestrator (the installation of which is covered [here](https://git.vdb.to/cerc-io/stack-orchestrator#install)).
 
 This deployment expects that ipld-eth-server's endpoints are available on the local machine at http://ipld-eth-server.example.com:8083/graphql and http://ipld-eth-server.example.com:8082. More advanced configurations are supported by modifying the watcher's [config file](../../config/watcher-mobymask/mobymask-watcher.toml).
 

stack_orchestrator/data/stacks/nitro-auth/README.md

@@ -0,0 +1,104 @@
+# go-nitro-auth
+
+Deploy a stack for demoing Nitro-based auth, using either a local fixturenet (fully self-contained) or remote testnet.
+
+## Local Fixturenet (Self-Contained)
+
+### Clone required repositories
+
+```
+$ laconic-so --stack fixturenet-eth setup-repositories
+$ laconic-so --stack go-nitro-auth setup-repositories
+```
+
+### Build containers
+
+```
+$ laconic-so --stack fixturenet-eth build-containers
+$ laconic-so --stack go-nitro-auth build-containers
+```
+
+### Create a deployment
+
+```
+$ laconic-so --stack fixturenet-eth deploy init --output nitro-net.yml
+$ laconic-so --stack fixturenet-eth deploy create --spec-file nitro-net.yml --deployment-dir /srv/nitro-net
+
+$ laconic-so --stack go-nitro-auth deploy init --map-ports-to-host any-same --output nitro-auth.yml
+$ laconic-so --stack go-nitro-auth deploy create --spec-file nitro-auth.yml --deployment-dir /srv/nitro-auth
+
+# Place them both in the same namespace (TODO: support setting the deployment name via --cluster).
+$ cp /srv/nitro-net/deployment.yml /srv/nitro-auth/deployment.yml
+```
+
+### Start the containers
+
+```
+$ laconic-so deployment --dir /srv/nitro-net up
+$ laconic-so deployment --dir /srv/nitro-auth up
+```
+
+### Open the webapp
+
+Visit http://localhost:5678
+
+## Remote Testnet
+
+This example will use the Linea Sepolia testnet.
+
+### Clone required repositories
+
+```
+$ laconic-so --stack go-nitro-auth setup-repositories
+```
+
+### Build containers
+
+```
+$ laconic-so --stack go-nitro-auth build-containers
+```
+
+### Create a deployment
+
+```
+$ laconic-so --stack go-nitro-auth deploy init --map-ports-to-host any-same --output nitro-auth.yml
+$ laconic-so --stack go-nitro-auth deploy create --spec-file nitro-auth.yml --deployment-dir /srv/nitro-auth
+```
+
+### Set your keys, contract addresses, etc.
+
+You must set the private keys for two accounts with funds on the target network, as well as the contract addresses
+(if they already exist) or else an account to create them.  You must also set the URL to use for WebSocket connections,
+eg, `wss://linea-sepolia.infura.io/ws/v3/<MY_API_KEY>`
+
+#### Config
+
+```
+$ vim /srv/nitro-auth/config.env
+# Addresses of existing contracts.
+CERC_CA_ADDRESS="0x1Ae815c3e7556e16ceaB6B6d46306C1870EB6d24"
+CERC_NA_ADDRESS="0xc453C5E3f304bb545A3Df7bBa02fe6274A056636"
+CERC_VPA_ADDRESS="0xA11af80D75b1150631FA78178c94fa451c7172a8"
+
+# Else the private key of an account and RPC URL to use create them.
+CERC_PRIVATE_KEY_DEPLOYER=<PRIV_KEY_HERE>
+CERC_ETH_RPC_ENDPOINT=https://rpc.sepolia.linea.build
+
+# The WebSocket chain URL.
+CERC_NITRO_CHAIN_URL=wss://linea-sepolia.infura.io/ws/v3/<MY_API_KEY_HERE>
+
+# Private key for "Alice" account (payer)
+CERC_NITRO_CHAIN_PK_ALICE=<ALICE_PRIVATE_KEY_HERE>
+
+# Private key for "Bob" account (payee)
+CERC_NITRO_CHAIN_PK_BOB=<BOB_PRIVATE_KEY_HERE>
+```
+
+### Start the stack
+```
+$ laconic-so deployment --dir /srv/nitro-auth up
+```
+
+### Open the webapp
+
+Visit http://localhost:5678

stack_orchestrator/data/stacks/nitro-auth/stack.yml

@@ -0,0 +1,17 @@
+version: "1.0"
+name: nitro-auth
+description: "Stack to demonstrate payments between various services"
+repos:
+  # for nitro-contracts and ts-nitro example app
+  - github.com/cerc-io/ts-nitro@telackey/demo-auth
+  # for go-nitro, nitro-rpc-client, and go-nitro-auth example app
+  - github.com/cerc-io/go-nitro@telackey/update
+containers:
+  # nitro
+  - cerc/nitro-contracts
+  - cerc/ts-nitro
+  - cerc/go-nitro
+  - cerc/nitro-rpc-client
+pods:
+  - nitro-contracts
+  - nitro-auth

stack_orchestrator/data/stacks/ping-pub/README.md

@@ -0,0 +1,10 @@
+# ping-pub
+Experimental block explorer for laconic
+
+```
+laconic-so --stack ping-pub setup-repositories
+laconic-so --stack ping-pub build-containers
+laconic-so --stack ping-pub deploy init --output ping-pub-spec.yml --map-ports-to-host localhost-same
+laconic-so --stack ping-pub deploy create --spec-file ping-pub-spec.yml --deployment-dir pp-deployment
+laconic-so deployment --dir pp-deployment start
+```

stack_orchestrator/data/stacks/ping-pub/stack.yml

@@ -0,0 +1,9 @@
+version: "0.1"
+name: ping-pub
+repos:
+  # fork, but only for config & Dockerfile reasonsb
+  - github.com/LaconicNetwork/explorer@laconic
+containers:
+  - cerc/ping-pub
+pods:
+  - ping-pub

stack_orchestrator/data/stacks/snowballtools-base-backend/stack.yml

@@ -0,0 +1,10 @@
+version: "1.0"
+name: snowballtools-base-backend
+description: "snowballtools-base-backend"
+repos:
+  - github.com/snowball-tools/snowballtools-base
+containers:
+  - cerc/webapp-base
+  - cerc/snowballtools-base-backend
+pods:
+  - snowballtools-base-backend

stack_orchestrator/data/stacks/test-database/README.md

@@ -0,0 +1,3 @@
+# Test Database Stack
+
+A stack with a database for test/demo purposes.

stack_orchestrator/data/stacks/test-database/stack.yml

@@ -0,0 +1,9 @@
+version: "1.0"
+name: test
+description: "A test database stack"
+repos:
+containers:
+  - cerc/test-database-container
+  - cerc/test-database-client
+pods:
+  - test-database