Commit Graph

137 Commits

Author SHA1 Message Date
baptiste-b-pegasys
860184d542
p2p: remove term "whitelist" (#23295)
Co-authored-by: Felix Lange <fjl@twurst.com>
2021-07-29 17:50:18 +02:00
Ahyun
4fcc93d922
p2p/server: fix method name in comment (#23123) 2021-06-29 12:14:47 +03:00
Chen Quan
15e6c27f8b
p2p: fix minor typo and remove fd parameter in checkInboundConn (#22547) 2021-03-24 13:18:29 +01:00
Felföldi Zsolt
a72fa88a0d
les: switch to new discv5 (#21940)
This PR enables running the new discv5 protocol in both LES client
and server mode. In client mode it mixes discv5 and dnsdisc iterators
(if both are enabled) and filters incoming ENRs for "les" tag and fork ID.
The old p2p/discv5 package and all references to it are removed.

Co-authored-by: Felix Lange <fjl@twurst.com>
2021-01-26 21:41:35 +01:00
Martin Holst Swende
3ef52775c4
p2p: avoid spinning loop on out-of-handles (#21878)
* p2p: avoid busy-loop on temporary errors

* p2p: address review concerns
2020-11-20 15:14:25 +01:00
Martin Holst Swende
7a5a822905
eth, p2p: use truncated names (#21698)
* peer: return localAddr instead of name to prevent spam

We currently use the name (which can be freely set by the peer) in several log messages.
This enables malicious actors to write spam into your geth log.
This commit returns the localAddr instead of the freely settable name.

* p2p: reduce usage of peer.Name in warn messages

* eth, p2p: use truncated names

* Update peer.go

Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Felix Lange <fjl@twurst.com>
2020-10-13 13:28:24 +02:00
rene
129cf075e9
p2p: move rlpx into separate package (#21464)
This change moves the RLPx protocol implementation into a separate package,
p2p/rlpx. The new package can be used to establish RLPx connections for
protocol testing purposes.

Co-authored-by: Felix Lange <fjl@twurst.com>
2020-09-22 10:17:39 +02:00
ucwong
bf35e27ea7
p2p/server: add UDP port mapping goroutine to wait group (#20846) 2020-04-01 18:00:33 +02:00
Felix Lange
ac72787768
p2p: remove MeteredPeerEvent (#20679)
This event was added for the dashboard, but we don't need it anymore
since the dashboard is gone.
2020-02-17 13:22:14 +02:00
Felix Lange
90caa2cabb
p2p: new dial scheduler (#20592)
* p2p: new dial scheduler

This change replaces the peer-to-peer dial scheduler with a new and
improved implementation. The new code is better than the previous
implementation in two key aspects:

- The time between discovery of a node and dialing that node is
  significantly lower in the new version. The old dialState kept
  a buffer of nodes and launched a task to refill it whenever the buffer
  became empty. This worked well with the discovery interface we used to
  have, but doesn't really work with the new iterator-based discovery
  API.

- Selection of static dial candidates (created by Server.AddPeer or
  through static-nodes.json) performs much better for large amounts of
  static peers. Connections to static nodes are now limited like dynanic
  dials and can no longer overstep MaxPeers or the dial ratio.

* p2p/simulations/adapters: adapt to new NodeDialer interface

* p2p: re-add check for self in checkDial

* p2p: remove peersetCh

* p2p: allow static dials when discovery is disabled

* p2p: add test for dialScheduler.removeStatic

* p2p: remove blank line

* p2p: fix documentation of maxDialPeers

* p2p: change "ok" to "added" in static node log

* p2p: improve dialTask docs

Also increase log level for "Can't resolve node"

* p2p: ensure dial resolver is truly nil without discovery

* p2p: add "looking for peers" log message

* p2p: clean up Server.run comments

* p2p: fix maxDialedConns for maxpeers < dialRatio

Always allocate at least one dial slot unless dialing is disabled using
NoDial or MaxPeers == 0. Most importantly, this fixes MaxPeers == 1 to
dedicate the sole slot to dialing instead of listening.

* p2p: fix RemovePeer to disconnect the peer again

Also make RemovePeer synchronous and add a test.

* p2p: remove "Connection set up" log message

* p2p: clean up connection logging

We previously logged outgoing connection failures up to three times.

- in SetupConn() as "Setting up connection failed addr=..."
- in setupConn() with an error-specific message and "id=... addr=..."
- in dial() as "Dial error task=..."

This commit ensures a single log message is emitted per failure and adds
"id=... addr=... conn=..." everywhere (id= omitted when the ID isn't
known yet).

Also avoid printing a log message when a static dial fails but can't be
resolved because discv4 is disabled. The light client hit this case all
the time, increasing the message count to four lines per failed
connection.

* p2p: document that RemovePeer blocks
2020-02-13 11:10:03 +01:00
Felix Lange
d5acc5ed9e p2p: ensure Server.loop is ticking even if discovery hangs (#20573)
This is a temporary fix for a problem which started happening when the
dialer was changed to read nodes from an enode.Iterator. Before the
iterator change, discovery queries would always return within a couple
seconds even if there was no Internet access. Since the iterator won't
return unless a node is actually found, discoverTask can take much
longer. This means that the 'emergency connect' logic might not execute
in time, leading to a stuck node.
2020-01-17 12:29:16 +02:00
Felix Lange
fcafa0baa5 p2p: wait for listener goroutines on shutdown (#20569)
* p2p: wait for goroutine exit, fixes #20558

* p2p: wait for all slots on exit

Co-authored-by: Martin Holst Swende <martin@swende.se>
2020-01-16 14:10:15 +02:00
Felix Lange
9e8cc00b73
p2p: remove unused code (#20325) 2019-11-19 17:16:08 +01:00
Kurkó Mihály
4ea9b62b5c dashboard: send current block to the dashboard client (#19762)
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.

* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
2019-11-13 12:13:13 +01:00
Felix Lange
2c37142d2f cmd/devp2p, p2p: dial using node iterator, discovery crawler (#20132)
* p2p/enode: add Iterator and associated utilities

* p2p/discover: add RandomNodes iterator

* p2p: dial using iterator

* cmd/devp2p: add discv4 crawler

* cmd/devp2p: WIP nodeset filter

* cmd/devp2p: fixup lesFilter

* core/forkid: add NewStaticFilter

* cmd/devp2p: make -eth-network filter actually work

* cmd/devp2p: improve crawl timestamp handling

* cmd/devp2p: fix typo

* p2p/enode: fix comment typos

* p2p/discover: fix comment typos

* p2p/discover: rename lookup.next to 'advance'

* p2p: lower discovery mixer timeout

* p2p/enode: implement dynamic FairMix timeouts

* cmd/devp2p: add ropsten support in -eth-network filter

* cmd/devp2p: tweak crawler log message
2019-10-29 17:08:57 +02:00
Péter Szilágyi
983f92368b
core/forkid: implement the forkid EIP, announce via ENR (#19738)
* eth: chain config (genesis + fork) ENR entry

* core/forkid, eth: protocol independent fork ID, update to CRC32 spec

* core/forkid, eth: make forkid a struct, next uint64, enr struct, RLP

* core/forkid: change forkhash rlp encoding from int to [4]byte

* eth: fixup eth entry a bit and update it every block

* eth: fix lint

* eth: fix crash in ethclient tests
2019-07-08 18:53:47 +03:00
Felix Lange
cc0f0e27a6 p2p: remove "cap" enr entry (#19800)
This entry was an experiment, but we're moving on to the
entry-per-protocol instead.
2019-07-08 18:41:41 +03:00
Martin Holst Swende
7fd82a0e3e p2p: add address info to peer event reporting (#19716) 2019-07-05 20:27:13 +02:00
Felix Lange
f213ceb83f p2p: add more info to peer addition and removal logs (#19712) 2019-06-13 11:51:11 +02:00
Felix Lange
c420dcb39c
p2p: enforce connection retry limit on server side (#19684)
The dialer limits itself to one attempt every 30s. Apply the same limit
in Server and reject peers which try to connect too eagerly. The check
against the limit happens right after accepting the connection.

Further changes in this commit ensure we pass the Server logger
down to Peer instances, discovery and dialState. Unit test logging now
works in all Server tests.
2019-06-11 12:45:33 +02:00
Péter Szilágyi
b02958b9c5
core, ethdb, metrics, p2p: expose various counter metrics for grafana 2019-06-11 09:49:13 +03:00
Felix Lange
e83c3ccc47
p2p/enode: improve IPv6 support, add ENR text representation (#19663)
* p2p/enr: add entries for for IPv4/IPv6 separation

This adds entry types for "ip6", "udp6", "tcp6" keys. The IP type stays
around because removing it would break a lot of code and force everyone
to care about the distinction.

* p2p/enode: track IPv4 and IPv6 address separately

LocalNode predicts the local node's UDP endpoint and updates the record.
This change makes it predict IPv4 and IPv6 endpoints separately since
they can now be in the record at the same time.

* p2p/enode: implement base64 text format
* all: switch to enode.Parse(...)

This allows passing base64-encoded node records to all the places that
previously accepted enode:// URLs. The URL format is still supported.

* cmd/bootnode, p2p: log node URL instead of ENR

...and return the base64 record in NodeInfo.
2019-06-07 15:31:00 +02:00
needkane
54abb97e3b p2p: use errors.New instead of fmt.Errorf (#18193) 2018-11-30 22:38:37 +01:00
Corey Lin
212bf266c5 eth, p2p: fix comment typos (#18014) 2018-11-08 12:25:14 +01:00
Kurkó Mihály
16e4d0e005 p2p: meter peer traffic, emit metered peer events (#17695)
This change extends the peer metrics collection:

- traces the life-cycle of the peers
- meters the peer traffic separately for every peer
- creates event feed for the peer events
- emits the peer events
2018-10-16 00:40:51 +02:00
Felix Lange
6f607de5d5
p2p, p2p/discover: add signed ENR generation (#17753)
This PR adds enode.LocalNode and integrates it into the p2p
subsystem. This new object is the keeper of the local node
record. For now, a new version of the record is produced every
time the client restarts. We'll make it smarter to avoid that in
the future.

There are a couple of other changes in this commit: discovery now
waits for all of its goroutines at shutdown and the p2p server
now closes the node database after discovery has shut down. This
fixes a leveldb crash in tests. p2p server startup is faster
because it doesn't need to wait for the external IP query
anymore.
2018-10-12 11:47:24 +02:00
Felix Lange
30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
Wenbiao Zheng
d1aa605f1e all: remove the duplicate 'the' in annotations (#17509) 2018-08-27 11:49:29 +03:00
Felföldi Zsolt
eef65b20fc p2p: use safe atomic operations when changing connFlags (#17325) 2018-08-06 15:46:30 +03:00
Felföldi Zsolt
c4df67461f
Merge pull request #16333 from shazow/addremovetrustedpeer
rpc: Add admin_addTrustedPeer and admin_removeTrustedPeer.
2018-08-06 13:30:04 +02:00
Janoš Guljaš
8f4c4fea20 p2p: fix rare deadlock in Stop (#17260) 2018-07-30 12:44:17 +03:00
Andrey Petrov
6209545083 p2p: Wrap conn.flags ops with atomic.Load/Store 2018-06-21 12:22:47 -04:00
Andrey Petrov
2a75fe3308 rpc: Add admin_addTrustedPeer and admin_removeTrustedPeer.
These RPC calls are analogous to Parity's parity_addReservedPeer and
parity_removeReservedPeer.

They are useful for adjusting the trusted peer set during runtime,
without requiring restarting the server.
2018-06-21 12:21:48 -04:00
Elad
1836366ac1 all: library changes for swarm-network-rewrite (#16898)
This commit adds all changes needed for the merge of swarm-network-rewrite.
The changes:

- build: increase linter timeout
- contracts/ens: export ensNode
- log: add Output method and enable fractional seconds in format
- metrics: relax test timeout
- p2p: reduced some log levels, updates to simulation packages
- rpc: increased maxClientSubscriptionBuffer to 20000
2018-06-14 11:21:17 +02:00
Ivan Daniluk
8522b31221 p2p: remove unused code (#16158)
* p2p: remove unused code

* p2p: remove unused imports
2018-02-22 19:20:28 +02:00
Martin Holst Swende
589b603a9b rpc: dns rebind protection (#15962)
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks

* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d

* rpc: add wildcard support for rpcallowedhosts + go fmt

* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check

* http, rpc, utils: make vhosts into map, address review concerns

* node: change log messages to use geth standard (not sprintf)

* rpc: fix spelling
2018-02-12 14:52:07 +02:00
Felix Lange
9123eceb0f p2p, p2p/discover: misc connectivity improvements (#16069)
* p2p: add DialRatio for configuration of inbound vs. dialed connections

* p2p: add connection flags to PeerInfo

* p2p/netutil: add SameNet, DistinctNetSet

* p2p/discover: improve revalidation and seeding

This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.

Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.

Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.

Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.

* p2p/discover: fix nits in UDP transport

We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
2018-02-12 14:36:09 +02:00
Felföldi Zsolt
92580d69d3 p2p, p2p/discover, p2p/discv5: implement UDP port sharing (#15200)
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.

DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
2018-01-22 13:38:34 +01:00
Lewis Marshall
54aeb8e4c0 p2p/simulations: various stability fixes (#15198)
p2p/simulations: introduce dialBan

- Refactor simulations/network connection getters to support
  avoiding simultaneous dials between two peers If two peers dial
  simultaneously, the connection will be dropped to help avoid
  that, we essentially lock the connection object with a
  timestamp which serves as a ban on dialing for a period of time
  (dialBanTimeout).

- The connection getter InitConn can be wrapped and passed to the
  nodes via adapters.NodeConfig#Reachable field and then used by
  the respective services when they initiate connections. This
  massively stablise the emerging connectivity when running with
  hundreds of nodes bootstrapping a network.

p2p: add Inbound public method to p2p.Peer

p2p/simulations: Add server id to logs to support debugging
in-memory network simulations when multiple peers are logging.

p2p: SetupConn now returns error. The dialer checks the error and
only calls resolve if the actual TCP dial fails.
2017-12-01 12:49:04 +01:00
Lewis Marshall
9feec51e2d p2p: add network simulation framework (#14982)
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
2017-09-25 10:08:07 +02:00
Felix Lange
30d706c35e cmd/geth: add --config file flag (#13875)
* p2p/discover, p2p/discv5: add marshaling methods to Node

* p2p/netutil: make Netlist decodable from TOML

* common/math: encode nil HexOrDecimal256 as 0x0

* cmd/geth: add --config file flag

* cmd/geth: add missing license header

* eth: prettify Config again, fix tests

* eth: use gasprice.Config instead of duplicating its fields

* eth/gasprice: hide nil default from dumpconfig output

* cmd/geth: hide genesis block in dumpconfig output

* node: make tests compile

* console: fix tests

* cmd/geth: make TOML keys look exactly like Go struct fields

* p2p: use discovery by default

This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.

* cmd/geth: make ethstats URL settable through config file

* cmd/faucet: fix configuration

* cmd/geth: dedup attach tests

* eth: add comment for DefaultConfig

* eth: pass downloader.SyncMode in Config

This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.

* cmd/utils: remove jitvm flags

* cmd/utils: make mutually exclusive flag error prettier

It now reads:

   Fatal: flags --dev, --testnet can't be used at the same time

* p2p: fix typo

* node: add DefaultConfig, use it for geth

* mobile: add missing NoDiscovery option

* cmd/utils: drop MakeNode

This exposed a couple of places that needed to be updated to use
node.DefaultConfig.

* node: fix typo

* eth: make fast sync the default mode

* cmd/utils: remove IPCApiFlag (unused)

* node: remove default IPC path

Set it in the frontends instead.

* cmd/geth: add --syncmode

* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive

* cmd/utils: don't enable WS, HTTP when setting addr

* cmd/utils: fix --identity
2017-04-12 17:27:23 +03:00
Péter Szilágyi
04fcae207d p2p: if no nodes are connected, attempt dialing bootnodes (#13874) 2017-04-10 18:33:41 +02:00
Felix Lange
96ae35e2ac p2p, p2p/discover, p2p/nat: rework logging using context keys 2017-02-28 10:20:29 +01:00
Péter Szilágyi
d4fd06c3dc
all: blidly swap out glog to our log15, logs need rework 2017-02-23 12:16:44 +02:00
Felix Lange
13e3b2f433 logger, pow/dagger, pow/ezp: delete dead code 2017-01-06 18:18:07 +01:00
Felix Lange
a47341cf96 p2p, p2p/discover, p2p/discv5: add IP network restriction feature
The p2p packages can now be configured to restrict all communication to
a certain subset of IP networks. This feature is meant to be used for
private networks.
2016-11-22 22:21:18 +01:00
Péter Szilágyi
b61f48e5aa
cmd, mobile, node, p2p: surface the discovery V5 bootnodes 2016-11-14 18:00:14 +02:00
Péter Szilágyi
178da7c6a9
mobile: initial wrappers for mobile support 2016-11-14 17:56:58 +02:00
Zsolt Felfoldi
49da42983a p2p/discv5: added new topic discovery package 2016-11-09 02:12:53 +01:00
Firescar96
4c3da0f2e1 node, p2p, internal: Add ability to remove peers via admin interface 2016-07-14 18:51:41 -04:00