## Issue Addressed
Updates discv5
Pending on
- [x] #3547
- [x] Alex upgrades his deps
## Proposed Changes
updates discv5 and the enr crate. The only relevant change would be some clear indications of ipv4 usage in lighthouse
## Additional Info
Functionally, this should be equivalent to the prev version.
As draft pending a discv5 release
* add capella gossip boiler plate
* get everything compiling
Co-authored-by: realbigsean <sean@sigmaprime.io
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
* small cleanup
* small cleanup
* cargo fix + some test cleanup
* improve block production
* add fixme for potential panic
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2371
## Proposed Changes
Backport some changes from `tree-states` that remove duplicated calculations of the `proposer_index`.
With this change the proposer index should be calculated only once for each block, and then plumbed through to every place it is required.
## Additional Info
In future I hope to add more data to the consensus context that is cached on a per-epoch basis, like the effective balances of validators and the base rewards.
There are some other changes to remove indexing in tests that were also useful for `tree-states` (the `tree-states` types don't implement `Index`).
## Issue Addressed
Implements new optimistic sync test format from https://github.com/ethereum/consensus-specs/pull/2982.
## Proposed Changes
- Add parsing and runner support for the new test format.
- Extend the mock EL with a set of canned responses keyed by block hash. Although this doubles up on some of the existing functionality I think it's really nice to use compared to the `preloaded_responses` or static responses. I think we could write novel new opt sync tests using these primtives much more easily than the previous ones. Forks are natively supported, and different responses to `forkchoiceUpdated` and `newPayload` are also straight-forward.
## Additional Info
Blocked on merge of the spec PR and release of new test vectors.
## Issue Addressed
Which issue # does this PR address?
#2629
## Proposed Changes
Please list or describe the changes introduced by this PR.
1. ci would dowload the bls test cases from https://github.com/ethereum/bls12-381-tests/
2. all the bls test cases(except eth ones) would use cases in the archive from step one
3. The bls test cases from https://github.com/ethereum/consensus-spec-tests would stay there and no use . For the future , these bls test cases would be remove suggested from https://github.com/ethereum/consensus-spec-tests/issues/25 . So it would do no harm and compatible for future cases.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
Question:
I am not sure if I should implement tests about `deserialization_G1`, `deserialization_G2` and `hash_to_G2` for the issue.
## Issue Addressed
Adding CLI tests for logging flags: log-color and disable-log-timestamp
Which issue # does this PR address?
#3588
## Proposed Changes
Add CLI tests for logging flags as described in #3588
Please list or describe the changes introduced by this PR.
Added logger_config to client::Config as suggested. Implemented Default for LoggerConfig based on what was being done elsewhere in the repo. Created 2 tests for each flag addressed.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
N/A
## Proposed Changes
With https://github.com/sigp/lighthouse/pull/3214 we made it such that you can either have 1 auth endpoint or multiple non auth endpoints. Now that we are post merge on all networks (testnets and mainnet), we cannot progress a chain without a dedicated auth execution layer connection so there is no point in having a non-auth eth1-endpoint for syncing deposit cache.
This code removes all fallback related code in the eth1 service. We still keep the single non-auth endpoint since it's useful for testing.
## Additional Info
This removes all eth1 fallback related metrics that were relevant for the monitoring service, so we might need to change the api upstream.
## Issue Addressed
Resolves#3573
## Proposed Changes
Fix the bytecode for the deposit contract deployment transaction and value for deposit transaction in the execution engine integration tests. Also verify that all published transaction make it to the execution payload and have a valid status.
## Issue Addressed
NA
## Proposed Changes
This PR removes duplicated block root computation.
Computing the `SignedBeaconBlock::canonical_root` has become more expensive since the merge as we need to compute the merke root of each transaction inside an `ExecutionPayload`.
Computing the root for [a mainnet block](https://beaconcha.in/slot/4704236) is taking ~10ms on my i7-8700K CPU @ 3.70GHz (no sha extensions). Given that our median seen-to-imported time for blocks is presently 300-400ms, removing a few duplicated block roots (~30ms) could represent an easy 10% improvement. When we consider that the seen-to-imported times include operations *after* the block has been placed in the early attester cache, we could expect the 30ms to be more significant WRT our seen-to-attestable times.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
I've noticed that our block hashing times increase significantly after the merge. I did some flamegraph-ing and noticed that we're allocating a `Vec` for each byte of each execution payload transaction. This seems like unnecessary work and a bit of a fragmentation risk.
This PR switches to `SmallVec<[u8; 32]>` for the packed encoding of `TreeHash`. I believe this is a nice simple optimisation with no downside.
### Benchmarking
These numbers were computed using #3580 on my desktop (i7 hex-core). You can see a bit of noise in the numbers, that's probably just my computer doing other things. Generally I found this change takes the time from 10-11ms to 8-9ms. I can also see all the allocations disappear from flamegraph.
This is the block being benchmarked: https://beaconcha.in/slot/4704236
#### Before
```
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 980: 10.553003ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 981: 10.563737ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 982: 10.646352ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 983: 10.628532ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 984: 10.552112ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 985: 10.587778ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 986: 10.640526ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 987: 10.587243ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 988: 10.554748ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 989: 10.551111ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 990: 11.559031ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 991: 11.944827ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 992: 10.554308ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 993: 11.043397ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 994: 11.043315ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 995: 11.207711ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 996: 11.056246ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 997: 11.049706ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 998: 11.432449ms
[2022-09-15T21:44:19Z INFO lcli::block_root] Run 999: 11.149617ms
```
#### After
```
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 980: 14.011653ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 981: 8.925314ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 982: 8.849563ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 983: 8.893689ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 984: 8.902964ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 985: 8.942067ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 986: 8.907088ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 987: 9.346101ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 988: 8.96142ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 989: 9.366437ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 990: 9.809334ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 991: 9.541561ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 992: 11.143518ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 993: 10.821181ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 994: 9.855973ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 995: 10.941006ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 996: 9.596155ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 997: 9.121739ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 998: 9.090019ms
[2022-09-15T21:41:49Z INFO lcli::block_root] Run 999: 9.071885ms
```
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
#3562
## Proposed Changes
Change the fork endpoint from `localhost` to `127.0.0.1` to match the ganache default listening host.
This way it doesn't try (and fail) to connect to `::1` on IPV6 machines.
## Additional Info
First PR
Add flag 'log-color' which preserves colors of log when stdout is redirected to a file.
This is my first lighthouse PR, please let me know if I'm not following contribution guidelines, I welcome meta-feeback (feedback on git commit messages, git branch naming, and the contents of the description of this PR.)
## Issue Addressed
Solves https://github.com/sigp/lighthouse/issues/3527
## Proposed Changes
Adding a flag which enables log color preserving when stdout is redirected to a file.
### Usage
Below I demonstrate current behaviour (without using the new flag) and the new behaviur (when using new flag).
In the screenshot below, I have to panes, one on top running `lighthouse` which redirects to file `~/Desktop/test.log` and one pane in the bottom which runs `tail -f ~/Desktop/test.log`.
#### Current behaviour
```sh
lighthouse --network prater vc |& tee -a ~/Desktop/test.log
```
**Result is no colors**
<img width="1624" alt="current" src="https://user-images.githubusercontent.com/864410/188258226-bfcf8271-4c9e-474c-848e-ac92a60df25c.png">
#### New behaviour
```sh
lighthouse --network prater vc --log-color |& tee -a ~/Desktop/test.log
```
**Result is colors** 🔴🟢🔵🟡
<img width="1624" alt="new" src="https://user-images.githubusercontent.com/864410/188258223-7d9ecf09-92c8-4cba-8f24-bd4d88fc0353.png">
## Additional Info
I chose American spelling of "color" instead of Brittish "colour' since that was aligned with `slog`'s API - method`force_color()`, let me know if you prefer spelling "colour" instead. I also chose to let it be an arg not taking any argument, just like `logfile-compress` flag, rather than having to write `--log-color true`.
## Issue Addressed
Resolves#3448
## Proposed Changes
Removes a known failure that wasn't actually a known failure. The tests declare this block invalid and we refuse to import it due to `ExecutionPayloadError(UnverifiedNonOptimisticCandidate)`.
This is correct since there is only one "eth1" block included in this test and two are required to trigger the merge (pre- and post-TTD blocks). It is slot 1 (tick = 12s) when this block is imported so the import must be prevented by `SAFE_SLOTS_TO_IMPORT_OPTIMISTICALLY`.
I'm not sure where I got the idea in #3448 that this test needed retrospective checking, that seems like a false assumption in hindsight.
## Additional Info
- Blocked on #3464
## Issue Addressed
Recent changes to the Nethermind codebase removed the `rocksdb` git submodule in favour of a `nuget` package.
This appears to have broken our ability to build the latest release of Nethermind inside our integration tests.
## Proposed Changes
~Temporarily pin the version used for the Nethermind integration tests to `master`. This ensures we use the packaged version of `rocksdb`. This is only necessary until a new release of Nethermind is available.~
Use `git submodule update --init --recursive` to ensure the required submodules are pulled before building.
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
N/A
## Proposed Changes
Fix clippy lints for latest rust version 1.63. I have allowed the [derive_partial_eq_without_eq](https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq) lint as satisfying this lint would result in more code that we might not want and I feel it's not required.
Happy to fix this lint across lighthouse if required though.
## Proposed Changes
Update the invalid head tests so that they work with the current default fork choice configuration.
Thanks @realbigsean for fixing the persistence test and the EF tests.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
There are scenarios where the only viable head will have an invalid execution payload, in this scenario the `get_head` function on `proto_array` will return an error. We must recover from this scenario by importing blocks from the network.
This PR stops `BeaconChain::recompute_head` from returning an error so that we can't accidentally start down-scoring peers or aborting block import just because the current head has an invalid payload.
## Reviewer Notes
The following changes are included:
1. Allow `fork_choice.get_head` to fail gracefully in `BeaconChain::process_block` when trying to update the `early_attester_cache`; simply don't add the block to the cache rather than aborting the entire process.
1. Don't return an error from `BeaconChain::recompute_head_at_current_slot` and `BeaconChain::recompute_head` to defensively prevent calling functions from aborting any process just because the fork choice function failed to run.
- This should have practically no effect, since most callers were still continuing if recomputing the head failed.
- The outlier is that the API will return 200 rather than a 500 when fork choice fails.
1. Add the `ProtoArrayForkChoice::set_all_blocks_to_optimistic` function to recover from the scenario where we've rebooted and the persisted fork choice has an invalid head.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3241
Closes https://github.com/sigp/lighthouse/issues/3242
## Proposed Changes
* [x] Implement logic to remove equivocating validators from fork choice per https://github.com/ethereum/consensus-specs/pull/2845
* [x] Update tests to v1.2.0-rc.1. The new test which exercises `equivocating_indices` is passing.
* [x] Pull in some SSZ abstractions from the `tree-states` branch that make implementing Vec-compatible encoding for types like `BTreeSet` and `BTreeMap`.
* [x] Implement schema upgrades and downgrades for the database (new schema version is V11).
* [x] Apply attester slashings from blocks to fork choice
## Additional Info
* This PR doesn't need the `BTreeMap` impl, but `tree-states` does, and I don't think there's any harm in keeping it. But I could also be convinced to drop it.
Blocked on #3322.
## Issue Addressed
The antithesis Docker builds starting failing once we made our MSRV later than 1.58. It seems like it was because there is a new "LLVM pass manager" used by rust by default in more recent versions. Adding a new flag disables usage of the new pass manager and allows builds to pass.
This adds a single flag to the antithesis `Dockerfile.libvoidstar`: `RUSTFLAGS="-Znew-llvm-pass-manager=no"`. But this flag requires us to use `nightly` so it also adds that, pinning to an arbitrary recent date.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
#3369
## Proposed Changes
The goal is to make it possible to build Lighthouse without network access,
so builds can be reproducible.
This parallels the existing functionality in `common/deposit_contract/build.rs`,
which allows specifying a filename through the environment to avoid downloading
it. In this case, by specifying the version and making it available on the
filesystem, the existing logic will avoid a network download.
## Issue Addressed
Unblock CI for this failure: https://github.com/sigp/lighthouse/runs/7529551988
The root cause is a disagreement between the test and Nethermind over whether the appropriate status for a payload with an unknown parent is SYNCING or ACCEPTED. According to the spec, SYNCING is correct so we should update the test to expect this correct behaviour. However Geth still returns `ACCEPTED`, so for now we allow either.
## Issue Addressed
Add a flag that optionally enables unrealized vote tracking. Would like to test out on testnets and benchmark differences in methods of vote tracking. This PR includes a DB schema upgrade to enable to new vote tracking style.
Co-authored-by: realbigsean <sean@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3189.
## Proposed Changes
- Always supply the justified block hash as the `safe_block_hash` when calling `forkchoiceUpdated` on the execution engine.
- Refactor the `get_payload` routine to use the new `ForkchoiceUpdateParameters` struct rather than just the `finalized_block_hash`. I think this is a nice simplification and that the old way of computing the `finalized_block_hash` was unnecessary, but if anyone sees reason to keep that approach LMK.
## Issue Addressed
The lcli and antithesis docker builds are failing in unstable so bumping all the versions here
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
#3302
## Proposed Changes
Move the `reqwest::Client` from being initialized per-validator, to being initialized per distinct Web3Signer.
This is done by placing the `Client` into a `HashMap` keyed by the definition of the Web3Signer as specified by the `ValidatorDefintion`. This will allow multiple Web3Signers to be used with a single VC and also maintains backwards compatibility.
## Additional Info
This was done to reduce the memory used by the VC when connecting to a Web3Signer.
I set up a local testnet using [a custom script](https://github.com/macladson/lighthouse/tree/web3signer-local-test/scripts/local_testnet_web3signer) and ran a VC with 200 validator keys:
VC with Web3Signer:
- `unstable`: ~200MB
- With fix: ~50MB
VC with Local Signer:
- `unstable`: ~35MB
- With fix: ~35MB
> I'm seeing some fragmentation with the VC using the Web3Signer, but not when using a local signer (this is most likely due to making lots of http requests and dealing with lots of JSON objects). I tested the above using `MALLOC_ARENA_MAX=1` to try to reduce the fragmentation. Without it, the values are around +50MB for both `unstable` and the fix.
## Issue Addressed
Resolves#3316
## Proposed Changes
This PR fixes an issue where lighthouse created a transition block with `block.execution_payload().timestamp == terminal_block.timestamp` if the terminal block was created at the slot boundary.
## Issue Addressed
N/A
## Proposed Changes
Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.
Adds the merge transition simulation to CI.
## Issue Addressed
Resolves#3159
## Proposed Changes
Sends transactions to the EE before requesting for a payload in the `execution_integration_tests`. Made some changes to the integration tests in order to be able to sign and publish transactions to the EE:
1. `genesis.json` for both geth and nethermind was modified to include pre-funded accounts that we know private keys for
2. Using the unauthenticated port again in order to make `eth_sendTransaction` and calls from the `personal` namespace to import keys
Also added a `fcu` call with `PayloadAttributes` before calling `getPayload` in order to give EEs sufficient time to pack transactions into the payload.
## Issue Addressed
Web3signer validators can't produce post-Bellatrix blocks.
## Proposed Changes
Add support for Bellatrix to web3signer validators.
## Additional Info
I am running validators with this code on Ropsten, but it may be a while for them to get a proposal.
## Issue Addressed
N/A
## Proposed Changes
Since Rust 1.62, we can use `#[derive(Default)]` on enums. ✨https://blog.rust-lang.org/2022/06/30/Rust-1.62.0.html#default-enum-variants
There are no changes to functionality in this PR, just replaced the `Default` trait implementation with `#[derive(Default)]`.
## Issue Addressed
* #3173
## Proposed Changes
Moved all `fee_recipient_file` related logic inside the `ValidatorStore` as it makes more sense to have this all together there. I tested this with the validators I have on `mainnet-shadow-fork-5` and everything appeared to work well. Only technicality is that I can't get the method to return `401` when the authorization header is not specified (it returns `400` instead). Fixing this is probably quite difficult given that none of `warp`'s rejections have code `401`.. I don't really think this matters too much though as long as it fails.
## Issue Addressed
Currently the execution-engine-integration test uses latest master for nethermind and geth, and right now the test fails using the latest unreleased commits.
## Proposed Changes
Fix the nethermind and geth revisions the test uses to the latest tag in each repo. This way we are not continuously testing unreleased code, which might even get reverted, and reduce the failures only to releases in each one.
Also improve error handling of the commands used to manage the git repos.
## Additional Info
na
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Overview
This rather extensive PR achieves two primary goals:
1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state.
2. Refactors fork choice, block production and block processing to `async` functions.
Additionally, it achieves:
- Concurrent forkchoice updates to the EL and cache pruning after a new head is selected.
- Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production.
- Concurrent per-block-processing and execution payload verification during block processing.
- The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?):
- I had to do this to deal with sending blocks into spawned tasks.
- Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones.
- We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap.
- Avoids cloning *all the blocks* in *every chain segment* during sync.
- It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough 😅)
- The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs.
For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273
## Changes to `canonical_head` and `fork_choice`
Previously, the `BeaconChain` had two separate fields:
```
canonical_head: RwLock<Snapshot>,
fork_choice: RwLock<BeaconForkChoice>
```
Now, we have grouped these values under a single struct:
```
canonical_head: CanonicalHead {
cached_head: RwLock<Arc<Snapshot>>,
fork_choice: RwLock<BeaconForkChoice>
}
```
Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously.
## Breaking Changes
### The `state` (root) field in the `finalized_checkpoint` SSE event
Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event:
1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`.
4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots.
Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](de2b2801c8/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java (L171-L182)) it uses [`getStateRootFromBlockRoot`](de2b2801c8/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java (L336-L341)) which uses (1).
I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku.
## Notes for Reviewers
I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct.
I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking".
I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it.
I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around.
Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2.
You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests:
- Changing tests to be `tokio::async` tests.
- Adding `.await` to fork choice, block processing and block production functions.
- Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`.
- Wrapping `SignedBeaconBlock` in an `Arc`.
- In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant.
I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic.
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
This PR is a subset of the changes in #3134. Unstable will still not function correctly with the new builder spec once this is merged, #3134 should be used on testnets
## Proposed Changes
- Removes redundancy in "builders" (servers implementing the builder spec)
- Renames `payload-builder` flag to `builder`
- Moves from old builder RPC API to new HTTP API, but does not implement the validator registration API (implemented in https://github.com/sigp/lighthouse/pull/3194)
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Lays the groundwork for builder API changes by implementing the beacon-API's new `register_validator` endpoint
## Proposed Changes
- Add a routine in the VC that runs on startup (re-try until success), once per epoch or whenever `suggested_fee_recipient` is updated, signing `ValidatorRegistrationData` and sending it to the BN.
- TODO: `gas_limit` config options https://github.com/ethereum/builder-specs/issues/17
- BN only sends VC registration data to builders on demand, but VC registration data *does update* the BN's prepare proposer cache and send an updated fcU to a local EE. This is necessary for fee recipient consistency between the blinded and full block flow in the event of fallback. Having the BN only send registration data to builders on demand gives feedback directly to the VC about relay status. Also, since the BN has no ability to sign these messages anyways (so couldn't refresh them if it wanted), and validator registration is independent of the BN head, I think this approach makes sense.
- Adds upcoming consensus spec changes for this PR https://github.com/ethereum/consensus-specs/pull/2884
- I initially applied the bit mask based on a configured application domain.. but I ended up just hard coding it here instead because that's how it's spec'd in the builder repo.
- Should application mask appear in the api?
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Resolves#3069
## Proposed Changes
Unify the `eth1-endpoints` and `execution-endpoints` flags in a backwards compatible way as described in https://github.com/sigp/lighthouse/issues/3069#issuecomment-1134219221
Users have 2 options:
1. Use multiple non auth execution endpoints for deposit processing pre-merge
2. Use a single jwt authenticated execution endpoint for both execution layer and deposit processing post merge
Related https://github.com/sigp/lighthouse/issues/3118
To enable jwt authenticated deposit processing, this PR removes the calls to `net_version` as the `net` namespace is not exposed in the auth server in execution clients.
Moving away from using `networkId` is a good step in my opinion as it doesn't provide us with any added guarantees over `chainId`. See https://github.com/ethereum/consensus-specs/issues/2163 and https://github.com/sigp/lighthouse/issues/2115
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Failures in our CI integration tests for Geth.
## Proposed Changes
Only connect to the authenticated execution endpoints during execution tests.
This is necessary now that it is impossible to connect to the `engine` api on an unauthenticated endpoint.
See https://github.com/ethereum/go-ethereum/pull/24997
## Additional Info
As these tests break semi-regularly, I have kept logs enabled to ease future debugging.
I've also updated the Nethermind tests, although these weren't broken. This should future-proof us if Nethermind decides to follow suit with Geth
