## Issue Addressed
https://github.com/ethereum/beacon-APIs/pull/222
## Proposed Changes
Update Lighthouse's randao verification API to match the `beacon-APIs` spec. We implemented the API before spec stabilisation, and it changed slightly in the course of review.
Rather than a flag `verify_randao` taking a boolean value, the new API uses a `skip_randao_verification` flag which takes no argument. The new spec also requires the randao reveal to be present and equal to the point-at-infinity when `skip_randao_verification` is set.
I've also updated the `POST /lighthouse/analysis/block_rewards` API to take blinded blocks as input, as the execution payload is irrelevant and we may want to assess blocks produced by builders.
## Additional Info
This is technically a breaking change, but seeing as I suspect I'm the only one using these parameters/APIs, I think we're OK to include this in a patch release.
## Issue Addressed
#3285
## Proposed Changes
Adds support for specifying histogram with buckets and adds new metric buckets for metrics mentioned in issue.
## Additional Info
Need some help for the buckets.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Closes#3514
## Proposed Changes
- Change default monitoring endpoint frequency to 120 seconds to fit with 30k requests/month limit.
- Allow configuration of the monitoring endpoint frequency using `--monitoring-endpoint-frequency N` where `N` is a value in seconds.
## Issue Addressed
[Have --checkpoint-sync-url timeout](https://github.com/sigp/lighthouse/issues/3478)
## Proposed Changes
I added a parameter for `get_bytes_opt_accept_header<U: IntoUrl>` which accept a timeout duration, and modified the body of `get_beacon_blocks_ssz` and `get_debug_beacon_states_ssz` to pass corresponding timeout durations.
## Issue Addressed
We currently subscribe to attestation subnets as soon as the subscription arrives (one epoch in advance), this makes it so that subscriptions for future slots are scheduled instead of done immediately.
## Proposed Changes
- Schedule subscriptions to subnets for future slots.
- Finish removing hashmap_delay, in favor of [delay_map](https://github.com/AgeManning/delay_map). This was the only remaining service to do this.
- Subscriptions for past slots are rejected, before we would subscribe for one slot.
- Add a new test for subscriptions that are not consecutive.
## Additional Info
This is also an effort in making the code easier to understand
## Issue Addressed
NA
## Proposed Changes
As we've seen on Prater, there seems to be a correlation between these messages
```
WARN Not enough time for a discovery search subnet_id: ExactSubnet { subnet_id: SubnetId(19), slot: Slot(3742336) }, service: attestation_service
```
... and nodes falling 20-30 slots behind the head for short periods. These nodes are running ~20k Prater validators.
After running some metrics, I can see that the `network_recv` channel is processing ~250k `AttestationSubscribe` messages per minute. It occurred to me that perhaps the `AttestationSubscribe` messages are "washing out" the `SendRequest` and `SendResponse` messages. In this PR I separate the `AttestationSubscribe` and `SyncCommitteeSubscribe` messages into their own queue so the `tokio::select!` in the `NetworkService` can still process the other messages in the `network_recv` channel without necessarily having to clear all the subscription messages first.
~~I've also added filter to the HTTP API to prevent duplicate subscriptions going to the network service.~~
## Additional Info
- Currently being tested on Prater
## Issue Addressed
NA
## Proposed Changes
Bump versions to v3.0.0
## Additional Info
- ~~Blocked on #3439~~
- ~~Blocked on #3459~~
- ~~Blocked on #3463~~
- ~~Blocked on #3462~~
- ~~Requires further testing~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
Fix clippy lints for latest rust version 1.63. I have allowed the [derive_partial_eq_without_eq](https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq) lint as satisfying this lint would result in more code that we might not want and I feel it's not required.
Happy to fix this lint across lighthouse if required though.
## Issue Addressed
N/A
## Proposed Changes
If the build tree is not a git repository, the unit test will fail. This PR fixes the issue.
## Additional Info
N/A
## Issue Addressed
Resolves#3388Resolves#2638
## Proposed Changes
- Return the `BellatrixPreset` on `/eth/v1/config/spec` by default.
- Allow users to opt out of this by providing `--http-spec-fork=altair` (unless there's a Bellatrix fork epoch set).
- Add the Altair constants from #2638 and make serving the constants non-optional (the `http-disable-legacy-spec` flag is deprecated).
- Modify the VC to only read the `Config` and not to log extra fields. This prevents it from having to muck around parsing the `ConfigAndPreset` fields it doesn't need.
## Additional Info
This change is backwards-compatible for the VC and the BN, but is marked as a breaking change for the removal of `--http-disable-legacy-spec`.
I tried making `Config` a `superstruct` too, but getting the automatic decoding to work was a huge pain and was going to require a lot of hacks, so I gave up in favour of keeping the default-based approach we have now.
## Issue Addressed
NA
## Proposed Changes
Update bootnodes for Prater. There are new IP addresses for the Sigma Prime nodes. Teku and Nimbus nodes were also added.
## Additional Info
Related: 24760cd4b4
## Issue Addressed
NA
## Proposed Changes
Modifies `lcli skip-slots` and `lcli transition-blocks` allow them to source blocks/states from a beaconAPI and also gives them some more features to assist with benchmarking.
## Additional Info
Breaks the current `lcli skip-slots` and `lcli transition-blocks` APIs by changing some flag names. It should be simple enough to figure out the changes via `--help`.
Currently blocked on #3263.
## Issue Addressed
https://github.com/status-im/nimbus-eth2/issues/3930
## Proposed Changes
We can trivially support beacon nodes which do not provide the `is_optimistic` field by wrapping the field in an `Option`.
## Issue Addressed
Fixes an issue identified by @remyroy whereby we were logging a recommendation to use `--eth1-endpoints` on merge-ready setups (when the execution layer was out of sync).
## Proposed Changes
I took the opportunity to clean up the other eth1-related logs, replacing "eth1" by "deposit contract" or "execution" as appropriate.
I've downgraded the severity of the `CRIT` log to `ERRO` and removed most of the recommendation text. The reason being that users lacking an execution endpoint will be informed by the new `WARN Not merge ready` log pre-Bellatrix, or the regular errors from block verification post-Bellatrix.
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
As specified in the [Beacon Chain API specs](https://github.com/ethereum/beacon-APIs/blob/master/apis/node/syncing.yaml#L32-L35) we should return `is_optimistic` as part of the response to a query for the `eth/v1/node/syncing` endpoint.
## Proposed Changes
Compute the optimistic status of the head and add it to the `SyncingData` response.
## Issue Addressed
#3031
## Proposed Changes
Updates the following API endpoints to conform with https://github.com/ethereum/beacon-APIs/pull/190 and https://github.com/ethereum/beacon-APIs/pull/196
- [x] `beacon/states/{state_id}/root`
- [x] `beacon/states/{state_id}/fork`
- [x] `beacon/states/{state_id}/finality_checkpoints`
- [x] `beacon/states/{state_id}/validators`
- [x] `beacon/states/{state_id}/validators/{validator_id}`
- [x] `beacon/states/{state_id}/validator_balances`
- [x] `beacon/states/{state_id}/committees`
- [x] `beacon/states/{state_id}/sync_committees`
- [x] `beacon/headers`
- [x] `beacon/headers/{block_id}`
- [x] `beacon/blocks/{block_id}`
- [x] `beacon/blocks/{block_id}/root`
- [x] `beacon/blocks/{block_id}/attestations`
- [x] `debug/beacon/states/{state_id}`
- [x] `debug/beacon/heads`
- [x] `validator/duties/attester/{epoch}`
- [x] `validator/duties/proposer/{epoch}`
- [x] `validator/duties/sync/{epoch}`
Updates the following Server-Sent Events:
- [x] `events?topics=head`
- [x] `events?topics=block`
- [x] `events?topics=finalized_checkpoint`
- [x] `events?topics=chain_reorg`
## Backwards Incompatible
There is a very minor breaking change with the way the API now handles requests to `beacon/blocks/{block_id}/root` and `beacon/states/{state_id}/root` when `block_id` or `state_id` is the `Root` variant of `BlockId` and `StateId` respectively.
Previously a request to a non-existent root would simply echo the root back to the requester:
```
curl "http://localhost:5052/eth/v1/beacon/states/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"data":{"root":"0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"}}
```
Now it will return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"code":404,"message":"NOT_FOUND: beacon block with root 0xaaaa…aaaa","stacktraces":[]}
```
In addition to this is the block root `0x0000000000000000000000000000000000000000000000000000000000000000` previously would return the genesis block. It will now return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0x0000000000000000000000000000000000000000000000000000000000000000"
{"code":404,"message":"NOT_FOUND: beacon block with root 0x0000…0000","stacktraces":[]}
```
## Additional Info
- `execution_optimistic` is always set, and will return `false` pre-Bellatrix. I am also open to the idea of doing something like `#[serde(skip_serializing_if = "Option::is_none")]`.
- The value of `execution_optimistic` is set to `false` where possible. Any computation that is reliant on the `head` will simply use the `ExecutionStatus` of the head (unless the head block is pre-Bellatrix).
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#3338
## Proposed Changes
This PR adds a new `--network goerli` flag that reuses the [Prater network configs](https://github.com/sigp/lighthouse/tree/stable/common/eth2_network_config/built_in_network_configs/prater).
As you'll see in #3338, there are several approaches to the problem of the Goerli/Prater alias. This approach achieves:
1. No duplication of the genesis state between Goerli and Prater.
- Upside: the genesis state for Prater is ~17mb, duplication would increase the size of the binary by that much.
2. When the user supplies `--network goerli`, they will get a datadir in `~/.lighthouse/goerli`.
- Upside: our docs stay correct when they declare a datadir is located at `~/.lighthouse/{network}`
- Downside: switching from `--network prater` to `--network goerli` will require some manual migration.
3. When using `--network goerli`, the [`config/spec`](https://ethereum.github.io/beacon-APIs/#/Config/getSpec) endpoint will return a [`CONFIG_NAME`](02a2b71d64/configs/mainnet.yaml (L11)) of "prater".
- Upside: VC running `--network prater` will still think it's on the same network as one using `--network goerli`.
- Downside: potentially confusing.
#3348 achieves the same goal as this PR with a different approach and set of trade-offs.
## Additional Info
### Notes for reviewers:
In e4896c2682 you'll see that I remove the `$name_str` by just using `stringify!($name_ident)` instead. This is a simplification that should have have been there in the first place.
Then, in 90b5e22fca I reclaim that second parameter with a new purpose; to specify the directory from which to load configs.
## Issue Addressed
#3302
## Proposed Changes
Move the `reqwest::Client` from being initialized per-validator, to being initialized per distinct Web3Signer.
This is done by placing the `Client` into a `HashMap` keyed by the definition of the Web3Signer as specified by the `ValidatorDefintion`. This will allow multiple Web3Signers to be used with a single VC and also maintains backwards compatibility.
## Additional Info
This was done to reduce the memory used by the VC when connecting to a Web3Signer.
I set up a local testnet using [a custom script](https://github.com/macladson/lighthouse/tree/web3signer-local-test/scripts/local_testnet_web3signer) and ran a VC with 200 validator keys:
VC with Web3Signer:
- `unstable`: ~200MB
- With fix: ~50MB
VC with Local Signer:
- `unstable`: ~35MB
- With fix: ~35MB
> I'm seeing some fragmentation with the VC using the Web3Signer, but not when using a local signer (this is most likely due to making lots of http requests and dealing with lots of JSON objects). I tested the above using `MALLOC_ARENA_MAX=1` to try to reduce the fragmentation. Without it, the values are around +50MB for both `unstable` and the fix.
## Issue Addressed
Resolves#3276.
## Proposed Changes
Add a timeout for the sync committee contributions at 1/4 the slot length such that we may be able to try backup beacon nodes in the case of contribution post failure.
## Additional Info
1/4 slot length seemed standard for the timeouts, but may want to decrease this to 1/2.
I did not find any timeout related / sync committee related tests, so there are no tests. Happy to write some with a bit of guidance.
## Issue Addressed
* #3173
## Proposed Changes
Moved all `fee_recipient_file` related logic inside the `ValidatorStore` as it makes more sense to have this all together there. I tested this with the validators I have on `mainnet-shadow-fork-5` and everything appeared to work well. Only technicality is that I can't get the method to return `401` when the authorization header is not specified (it returns `400` instead). Fixing this is probably quite difficult given that none of `warp`'s rejections have code `401`.. I don't really think this matters too much though as long as it fails.
## Overview
This rather extensive PR achieves two primary goals:
1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state.
2. Refactors fork choice, block production and block processing to `async` functions.
Additionally, it achieves:
- Concurrent forkchoice updates to the EL and cache pruning after a new head is selected.
- Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production.
- Concurrent per-block-processing and execution payload verification during block processing.
- The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?):
- I had to do this to deal with sending blocks into spawned tasks.
- Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones.
- We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap.
- Avoids cloning *all the blocks* in *every chain segment* during sync.
- It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough 😅)
- The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs.
For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273
## Changes to `canonical_head` and `fork_choice`
Previously, the `BeaconChain` had two separate fields:
```
canonical_head: RwLock<Snapshot>,
fork_choice: RwLock<BeaconForkChoice>
```
Now, we have grouped these values under a single struct:
```
canonical_head: CanonicalHead {
cached_head: RwLock<Arc<Snapshot>>,
fork_choice: RwLock<BeaconForkChoice>
}
```
Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously.
## Breaking Changes
### The `state` (root) field in the `finalized_checkpoint` SSE event
Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event:
1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`.
4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots.
Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](de2b2801c8/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java (L171-L182)) it uses [`getStateRootFromBlockRoot`](de2b2801c8/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java (L336-L341)) which uses (1).
I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku.
## Notes for Reviewers
I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct.
I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking".
I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it.
I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around.
Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2.
You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests:
- Changing tests to be `tokio::async` tests.
- Adding `.await` to fork choice, block processing and block production functions.
- Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`.
- Wrapping `SignedBeaconBlock` in an `Arc`.
- In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant.
I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic.
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
This PR is a subset of the changes in #3134. Unstable will still not function correctly with the new builder spec once this is merged, #3134 should be used on testnets
## Proposed Changes
- Removes redundancy in "builders" (servers implementing the builder spec)
- Renames `payload-builder` flag to `builder`
- Moves from old builder RPC API to new HTTP API, but does not implement the validator registration API (implemented in https://github.com/sigp/lighthouse/pull/3194)
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Lays the groundwork for builder API changes by implementing the beacon-API's new `register_validator` endpoint
## Proposed Changes
- Add a routine in the VC that runs on startup (re-try until success), once per epoch or whenever `suggested_fee_recipient` is updated, signing `ValidatorRegistrationData` and sending it to the BN.
- TODO: `gas_limit` config options https://github.com/ethereum/builder-specs/issues/17
- BN only sends VC registration data to builders on demand, but VC registration data *does update* the BN's prepare proposer cache and send an updated fcU to a local EE. This is necessary for fee recipient consistency between the blinded and full block flow in the event of fallback. Having the BN only send registration data to builders on demand gives feedback directly to the VC about relay status. Also, since the BN has no ability to sign these messages anyways (so couldn't refresh them if it wanted), and validator registration is independent of the BN head, I think this approach makes sense.
- Adds upcoming consensus spec changes for this PR https://github.com/ethereum/consensus-specs/pull/2884
- I initially applied the bit mask based on a configured application domain.. but I ended up just hard coding it here instead because that's how it's spec'd in the builder repo.
- Should application mask appear in the api?
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Add a new HTTP endpoint `POST /lighthouse/analysis/block_rewards` which takes a vec of `BeaconBlock`s as input and outputs the `BlockReward`s for them.
Augment the `BlockReward` struct with the attestation data for attestations in the block, which simplifies access to this information from blockprint. Using attestation data I've been able to make blockprint up to 95% accurate across Prysm/Lighthouse/Teku/Nimbus. I hope to go even higher using a bunch of synthetic blocks produced for Prysm/Nimbus/Lodestar, which are underrepresented in the current training data.
## Issue Addressed
NA
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
- Pending testing on our infra. **Please do not merge**
## Issue Addressed
NA
## Proposed Changes
Adds the configuration for the upcoming merge of the Ropsten network, as per:
https://github.com/eth-clients/merge-testnets/pull/9
Use the Ropsten network with: `lighthouse --network ropsten`
## Additional Info
This is still a work-in-progress. We should wait for the eth-clients/merge-testnets PR to be approved before merging this into our `unstable`.
## Issue Addressed
Web3Signer validators do not support client authentication. This means the `--tls-known-clients-file` option on Web3Signer can't be used with Lighthouse.
## Proposed Changes
Add two new fields to Web3Signer validators, `client_identity_path` and `client_identity_password`, which specify the path and password for a PKCS12 file containing a certificate and private key. If `client_identity_path` is present, use the certificate for SSL client authentication.
## Additional Info
I am successfully validating on Prater using client authentication with Web3Signer and client authentication.
## Issue Addressed
Which issue # does this PR address?
#3114
## Proposed Changes
1. introduce `mime` package
2. Parse `Accept` field in the header with `mime`
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
# Description
Since the `TaskExecutor` currently requires a `Weak<Runtime>`, it's impossible to use it in an async test where the `Runtime` is created outside our scope. Whilst we *could* create a new `Runtime` instance inside the async test, dropping that `Runtime` would cause a panic (you can't drop a `Runtime` in an async context).
To address this issue, this PR creates the `enum Handle`, which supports either:
- A `Weak<Runtime>` (for use in our production code)
- A `Handle` to a runtime (for use in testing)
In theory, there should be no change to the behaviour of our production code (beyond some slightly different descriptions in HTTP 500 errors), or even our tests. If there is no change, you might ask *"why bother?"*. There are two PRs (#3070 and #3175) that are waiting on these fixes to introduce some new tests. Since we've added the EL to the `BeaconChain` (for the merge), we are now doing more async stuff in tests.
I've also added a `RuntimeExecutor` to the `BeaconChainTestHarness`. Whilst that's not immediately useful, it will become useful in the near future with all the new async testing.
## Issue Addressed
#3068
## Proposed Changes
Adds support for remote key API.
## Additional Info
Needed to add `is_local_keystore` argument to `delete_definition_and_keystore` to know if we want to delete local or remote key. Previously this wasn't necessary because remotekeys(web3signers) could be deleted.
## Issue Addressed
Resolves#3102
## Proposed Changes
- https://github.com/sigp/lighthouse/issues/3102#issuecomment-1114835063
- This is not an ideal solution, since the commit hash is missing from version number, but I think it is sufficient.
## Additional Info
I've tested ... :
- `fallback` is updated via `change_version.sh`.
```shell
$ cd scripts/
$ ./change_version.sh 2.2.1 2.2.2
$ git diff ../common/lighthouse_version/src/lib.rs
```
```diff
@ common/lighthouse_version/src/lib.rs:20 @ pub const VERSION: &str = git_version!(
// NOTE: using --match instead of --exclude for compatibility with old Git
"--match=thiswillnevermatchlol"
],
- prefix = "Lighthouse/v2.2.1-",
- fallback = "Lighthouse/v2.2.1"
+ prefix = "Lighthouse/v2.2.2-",
+ fallback = "Lighthouse/v2.2.2"
);
```
- a package built without git info prints expected version number (v2.2.1).
```shell
$ git archive HEAD --output=/tmp/lighthouse.zip
$ cd /tmp
$ unzip lighthouse.zip
$ cd lighthouse
$ cargo build --release
$ target/release/lighthouse --version
Lighthouse v2.2.1
BLS library: blst
SHA256 hardware acceleration: false
Specs: mainnet (true), minimal (false), gnosis (false)
```
## Issue Addressed
In very rare occasions we've seen most if not all our peers in a chain with which we don't agree. Purging these peers can take a very long time: number of retries of the chain. Meanwhile sync is caught in a loop trying the chain again and again. This makes it so that we fast track purging peers via registering the failed chain to prevent retrying for some time (30 seconds). Longer times could be dangerous since a chain can fail if a batch fails to download for example. In this case, I think it's still acceptable to fast track purging peers since they are nor providing the required info anyway
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
Addresses sync stalls on v2.2.0 (i.e. https://github.com/sigp/lighthouse/issues/3147).
## Additional Info
I've avoided doing a full `cargo update` because I noticed there's a new patch version of libp2p and thought it could do with some more testing.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Cut release v2.2.0 including proposer boost.
## Additional Info
I also updated the clippy lints for the imminent release of Rust 1.60, although LH v2.2.0 will continue to compile using Rust 1.58 (our MSRV).
## Proposed Changes
I did some gardening 🌳 in our dependency tree:
- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve#3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.
Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.
## Additional Info
Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.
I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
## Proposed Changes
Increase the default `--slots-per-restore-point` to 8192 for a 4x reduction in freezer DB disk usage.
Existing nodes that use the previous default of 2048 will be left unchanged. Newly synced nodes (with or without checkpoint sync) will use the new 8192 default.
Long-term we could do away with the freezer DB entirely for validator-only nodes, but this change is much simpler and grants us some extra space in the short term. We can also roll it out gradually across our nodes by purging databases one by one, while keeping the Ansible config the same.
## Additional Info
We ignore a change from 2048 to 8192 if the user hasn't set the 8192 explicitly. We fire a debug log in the case where we do ignore:
```
DEBG Ignoring slots-per-restore-point config in favour of on-disk value, on_disk: 2048, config: 8192
```
## Proposed Changes
Mitigate the fork choice attacks described in [_Three Attacks on Proof-of-Stake Ethereum_](https://arxiv.org/abs/2110.10086) by enabling proposer boost @ 70% on mainnet.
Proposer boost has been running with stability on Prater for a few months now, and is safe to roll out gradually on mainnet. I'll argue that the financial impact of rolling out gradually is also minimal.
Consider how a proposer-boosted validator handles two types of re-orgs:
## Ex ante re-org (from the paper)
In the mitigated attack, a malicious proposer releases their block at slot `n + 1` late so that it re-orgs the block at the slot _after_ them (at slot `n + 2`). Non-boosting validators will follow this re-org and vote for block `n + 1` in slot `n + 2`. Boosted validators will vote for `n + 2`. If the boosting validators are outnumbered, there'll be a re-org to the malicious block from `n + 1` and validators applying the boost will have their slot `n + 2` attestations miss head (and target on an epoch boundary). Note that all the attesters from slot `n + 1` are doomed to lose their head vote rewards, but this is the same regardless of boosting.
Therefore, Lighthouse nodes stand to miss slightly more head votes than other nodes if they are in the minority while applying the proposer boost. Once the proposer boost nodes gain a majority, this trend reverses.
## Ex post re-org (using the boost)
The other type of re-org is an ex post re-org using the strategy described here: https://github.com/sigp/lighthouse/pull/2860. With this strategy, boosted nodes will follow the attempted re-org and again lose a head vote if the re-org is unsuccessful. Once boosting is widely adopted, the re-orgs will succeed and the non-boosting validators will lose out.
I don't think there are (m)any validators applying this strategy, because it is irrational to attempt it before boosting is widely adopted. Therefore I think we can safely ignore this possibility.
## Risk Assessment
From observing re-orgs on mainnet I don't think ex ante re-orgs are very common. I've observed around 1 per day for the last month on my node (see: https://gist.github.com/michaelsproul/3b2142fa8fe0ff767c16553f96959e8c), compared to 2.5 ex post re-orgs per day.
Given one extra slot per day where attesting will cause a missed head vote, each individual validator has a 1/32 chance of being assigned to that slot. So we have an increase of 1/32 missed head votes per validator per day in expectation. Given that we currently see ~7 head vote misses per validator per day due to late/missing blocks (and re-orgs), this represents only a (1/32)/7 = 0.45% increase in missed head votes in expectation. I believe this is so small that we shouldn't worry about it. Particularly as getting proposer boost deployed is good for network health and may enable us to drive down the number of late blocks over time (which will decrease head vote misses).
## TL;DR
Enable proposer boost now and release ASAP, as financial downside is a 0.45% increase in missed head votes until widespread adoption.
## Issue Addressed
MEV boost compatibility
## Proposed Changes
See #2987
## Additional Info
This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).
Additional TODO's and outstanding questions
- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Allow Lighthouse to speculatively create blocks via the `/eth/v1/validators/blocks` endpoint by optionally skipping the RANDAO verification that we introduced in #2740. When `verify_randao=false` is passed as a query parameter the `randao_reveal` is not required to be present, and if present will only be lightly checked (must be a valid BLS sig). If `verify_randao` is omitted it defaults to true and Lighthouse behaves exactly as it did previously, hence this PR is backwards-compatible.
I'd like to get this change into `unstable` pretty soon as I've got 3 projects building on top of it:
- [`blockdreamer`](https://github.com/michaelsproul/blockdreamer), which mocks block production every slot in order to fingerprint clients
- analysis of Lighthouse's block packing _optimality_, which uses `blockdreamer` to extract interesting instances of the attestation packing problem
- analysis of Lighthouse's block packing _performance_ (as in speed) on the `tree-states` branch
## Additional Info
Having tested `blockdreamer` with Prysm, Nimbus and Teku I noticed that none of them verify the randao signature on `/eth/v1/validator/blocks`. I plan to open a PR to the `beacon-APIs` repo anyway so that this parameter can be standardised in case the other clients add RANDAO verification by default in future.
## Issue Addressed
#3103
## Proposed Changes
Parse `http-address` and `metrics-address` as `IpAddr` for both the beacon node and validator client to support IPv6 addresses.
Also adjusts parsing of CORS origins to allow for IPv6 addresses.
## Usage
You can now set `http-address` and/or `metrics-address` flags to IPv6 addresses.
For example, the following:
`lighthouse bn --http --http-address :: --metrics --metrics-address ::1`
will expose the beacon node HTTP server on `[::]` (equivalent of `0.0.0.0` in IPv4) and the metrics HTTP server on `localhost` (the equivalent of `127.0.0.1` in IPv4)
The beacon node API can then be accessed by:
`curl "http://[server-ipv6-address]:5052/eth/v1/some_endpoint"`
And the metrics server api can be accessed by:
`curl "http://localhost:5054/metrics"` or by `curl "http://[::1]:5054/metrics"`
## Additional Info
On most Linux distributions the `v6only` flag is set to `false` by default (see the section for the `IPV6_V6ONLY` flag in https://www.man7.org/linux/man-pages/man7/ipv6.7.html) which means IPv4 connections will continue to function on a IPv6 address (providing it is appropriately mapped). This means that even if the Lighthouse API is running on `::` it is also possible to accept IPv4 connections.
However on Windows, this is not the case. The `v6only` flag is set to `true` so binding to `::` will only allow IPv6 connections.
## Issue Addressed
NA
## Proposed Changes
- Bump version to `v2.1.4`
- Run `cargo update`
## Additional Info
I think this release should be published around the 15th of March.
Presently `blocked` for testing on our infrastructure.
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
#3010
## Proposed Changes
- move log debounce time latch to `./common/logging`
- add timelatch to limit logging for `attestations_delay_queue` and `queued_block_roots`
## Additional Info
- Is a separate crate for the time latch preferred?
- `elapsed()` could take `LOG_DEBOUNCE_INTERVAL ` as an argument to allow for different granularity.
## Description
This PR adds a single, trivial commit (f5d2b27d78349d5a675a2615eba42cc9ae708094) atop #2986 to resolve a tests compile error. The original author (@ethDreamer) is AFK so I'm getting this one merged ☺️
Please see #2986 for more information about the other, significant changes in this PR.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
## Issue Addressed
NA
## Proposed Changes
Adds the functionality to allow blocks to be validated/invalidated after their import as per the [optimistic sync spec](https://github.com/ethereum/consensus-specs/blob/dev/sync/optimistic.md#how-to-optimistically-import-blocks). This means:
- Updating `ProtoArray` to allow flipping the `execution_status` of ancestors/descendants based on payload validity updates.
- Creating separation between `execution_layer` and the `beacon_chain` by creating a `PayloadStatus` struct.
- Refactoring how the `execution_layer` selects a `PayloadStatus` from the multiple statuses returned from multiple EEs.
- Adding testing framework for optimistic imports.
- Add `ExecutionBlockHash(Hash256)` new-type struct to avoid confusion between *beacon block roots* and *execution payload hashes*.
- Add `merge` to [`FORKS`](c3a793fd73/Makefile (L17)) in the `Makefile` to ensure we test the beacon chain with merge settings.
- Fix some tests here that were failing due to a missing execution layer.
## TODO
- [ ] Balance tests
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Proposed Changes
Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.
## Additional Info
We need this PR to unblock CI.
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the block packing data for all blocks over a discrete range of epochs.
## Usage
### Request
```
curl "http:localhost:5052/lighthouse/analysis/block_packing_efficiency?start_epoch=57730&end_epoch=57732"
```
### Response
```
[
{
"slot": "1847360",
"block_hash": "0xa7dc230659802df2f99ea3798faede2e75942bb5735d56e6bfdc2df335dcd61f",
"proposer_info": {
"validator_index": 1686,
"graffiti": ""
},
"available_attestations": 7096,
"included_attestations": 6459,
"prior_skip_slots": 0
},
...
]
```
## Additional Info
This is notably different to the existing lcli code:
- Uses `BlockReplayer` #2863 and as such runs significantly faster than the previous method.
- Corrects the off-by-one #2878
- Removes the `offline` validators component. This was only a "best guess" and simply was used as a way to determine an estimate of the "true" packing efficiency and was generally not helpful in terms of direct comparisons between different packing methods. As such it has been removed from the API and any future estimates of "offline" validators would be better suited in a separate/more targeted API or as part of 'beacon watch': #2873
- Includes `prior_skip_slots`.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Closes#3014
## Proposed Changes
- Rename `receipt_root` to `receipts_root`
- Rename `execute_payload` to `notify_new_payload`
- This is slightly weird since we modify everything except the actual HTTP call to the engine API. That change is expected to be implemented in #2985 (cc @ethDreamer)
- Enable "random" tests for Bellatrix.
## Notes
This will break *partially* compatibility with Kintusgi testnets in order to gain compatibility with [Kiln](https://hackmd.io/@n0ble/kiln-spec) testnets. I think it will only break the BN APIs due to the `receipts_root` change, however it might have some other effects too.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Removes all configurations and hard-coded rules related to the deprecated Pyrmont testnet.
## Additional Info
Pyrmont is deprecated/will be shut down after being used for scenario testing, this PR removes configurations related to it.
Co-authored-by: Zachinquarantine <zachinquarantine@yahoo.com>
## Issue Addressed
#2883
## Proposed Changes
* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs
## Additional Info
Changed the Implementation following the discussion in #2883.
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
## Issue Addressed
Implements the standard key manager API from https://ethereum.github.io/keymanager-APIs/, formerly https://github.com/ethereum/beacon-APIs/pull/151
Related to https://github.com/sigp/lighthouse/issues/2557
## Proposed Changes
- [x] Add all of the new endpoints from the standard API: GET, POST and DELETE.
- [x] Add a `validators.enabled` column to the slashing protection database to support atomic disable + export.
- [x] Add tests for all the common sequential accesses of the API
- [x] Add tests for interactions with remote signer validators
- [x] Add end-to-end tests for migration of validators from one VC to another
- [x] Implement the authentication scheme from the standard (token bearer auth)
## Additional Info
The `enabled` column in the validators SQL database is necessary to prevent a race condition when exporting slashing protection data. Without the slashing protection database having a way of knowing that a key has been disabled, a concurrent request to sign a message could insert a new record into the database. The `delete_concurrent_with_signing` test exercises this code path, and was indeed failing before the `enabled` column was added.
The validator client authentication has been modified from basic auth to bearer auth, with basic auth preserved for backwards compatibility.
## Proposed Changes
Add a new hardcoded spec for the Gnosis Beacon Chain.
Ideally, official Lighthouse executables will be able to connect to the gnosis beacon chain from now on, using `--network gnosis` CLI option.
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the attestation performances of a validator (or all validators) over a discrete range of epochs.
Performances can be computed for a single validator, or for the global validator set.
## Usage
### Request
The API can be used as follows:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/{validator_index}?start_epoch=57730&end_epoch=57732"
```
Alternatively, to compute performances for the global validator set:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/global?start_epoch=57730&end_epoch=57732"
```
### Response
The response is JSON formatted as follows:
```
[
{
"index": 72,
"epochs": {
"57730": {
"active": true,
"head": false,
"target": false,
"source": false
},
"57731": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
"57732": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
}
}
]
```
> Note that the `"epochs"` are not guaranteed to be in ascending order.
## Additional Info
- This API is intended to be used in our upcoming validator analysis tooling (#2873) and will likely not be very useful for regular users. Some advanced users or block explorers may find this API useful however.
- The request range is limited to 100 epochs (since the range is inclusive and it also computes the `end_epoch` it's actually 101 epochs) to prevent Lighthouse using exceptionally large amounts of memory.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2857
## Proposed Changes
Explicitly set GNU malloc's MMAP_THRESHOLD to 128KB, disabling dynamic adjustments. For rationale see the linked issue.
## Issue Addressed
NA
## Proposed Changes
- Bump Lighthouse version to v2.1.1
- Update `thread_local` from v1.1.3 to v1.1.4 to address https://rustsec.org/advisories/RUSTSEC-2022-0006
## Additional Info
- ~~Blocked on #2950~~
- ~~Blocked on #2952~~
## Proposed Changes
This PR establishes compatibility between Lighthouse's VC and Nimbus's BN.
Lighthouse was previously `POST`ing unquoted lists of validator indices to the attester and sync duties endpoints which were (correctly) not accepted by Nimbus. These lists had slipped through the cracks because they didn't have an explicit wrapper type to add `serde` annotations to. I've added the `ValidatorIndexDataRef` newtype in order to implement the modified serialisation behaviour.
## Testing
Combined with https://github.com/sigp/lighthouse/pull/2940, I've confirmed that this PR allows my Lighthouse VC on Prater to validate with the public Nimbus BN listed here: https://github.com/status-im/nimbus-eth2#quickly-test-your-tooling-against-nimbus. I haven't had a block proposal yet, but attestations and sync committee messages are working.
## Additional Info
This may also provide compatibility with Prysm BNs but I haven't had a chance to test that yet.
## Issues Addressed
Closes#2739Closes#2812
## Proposed Changes
Support the deserialization of query strings containing duplicate keys into their corresponding types.
As `warp` does not support this feature natively (as discussed in #2739), it relies on the external library [`serde_array_query`](https://github.com/sigp/serde_array_query) (written by @michaelsproul)
This is backwards compatible meaning that both of the following requests will produce the same output:
```
curl "http://localhost:5052/eth/v1/events?topics=head,block"
```
```
curl "http://localhost:5052/eth/v1/events?topics=head&topics=block"
```
## Additional Info
Certain error messages have changed slightly. This only affects endpoints which accept multiple values.
For example:
```
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
is now
```
{"code":400,"message":"BAD_REQUEST: unable to parse query","stacktraces":[]}
```
The serve order of the endpoints `get_beacon_state_validators` and `get_beacon_state_validators_id` have flipped:
```rust
.or(get_beacon_state_validators_id.boxed())
.or(get_beacon_state_validators.boxed())
```
This is to ensure proper error messages when filter fallback occurs due to the use of the `and_then` filter.
## Future Work
- Cleanup / remove filter fallback behaviour by substituting `and_then` with `then` where appropriate.
- Add regression tests for HTTP API error messages.
## Credits
- @mooori for doing the ground work of investigating possible solutions within the existing Rust ecosystem.
- @michaelsproul for writing [`serde_array_query`](https://github.com/sigp/serde_array_query) and for helping debug the behaviour of the `warp` filter fallback leading to incorrect error messages.
## Proposed Changes
Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.
I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.
Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
## Issue Addressed
NA
## Proposed Changes
We have observed occasions were under-resourced nodes will receive messages that were valid *at the time*, but later become invalidated due to long waits for a `BeaconProcessor` worker.
In this PR, we will check to see if the message was valid *at the time of receipt*. If it was initially valid but invalid now, we just ignore the message without penalizing the peer.
## Additional Info
NA
## Proposed Changes
Add `mallinfo2` behind a feature flag so that we can get accurate memory metrics during debugging. It can be enabled when building Lighthouse like so (so long as the platform supports it):
```
cargo install --path lighthouse --features "malloc_utils/mallinfo2"
```
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
New rust lints
## Proposed Changes
- Boxing some enum variants
- removing some unused fields (is the validator lockfile unused? seemed so to me)
## Additional Info
- some error fields were marked as dead code but are logged out in areas
- left some dead fields in our ef test code because I assume they are useful for debugging?
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#1996
## Proposed Changes
Run a second `Logger` via `sloggers` which logs to a file in the background with:
- separate `debug-level` for background and terminal logging
- the ability to limit log size
- rotation through a customizable number of log files
- an option to compress old log files (`.gz` format)
Add the following new CLI flags:
- `--logfile-debug-level`: The debug level of the log files
- `--logfile-max-size`: The maximum size of each log file
- `--logfile-max-number`: The number of old log files to store
- `--logfile-compress`: Whether to compress old log files
By default background logging uses the `debug` log level and saves logfiles to:
- Beacon Node: `$HOME/.lighthouse/$network/beacon/logs/beacon.log`
- Validator Client: `$HOME/.lighthouse/$network/validators/logs/validator.log`
Or, when using the `--datadir` flag:
`$datadir/beacon/logs/beacon.log` and `$datadir/validators/logs/validator.log`
Once rotated, old logs are stored like so: `beacon.log.1`, `beacon.log.2` etc.
> Note: `beacon.log.1` is always newer than `beacon.log.2`.
## Additional Info
Currently the default value of `--logfile-max-size` is 200 (MB) and `--logfile-max-number` is 5.
This means that the maximum storage space that the logs will take up by default is 1.2GB.
(200MB x 5 from old log files + <200MB the current logfile being written to)
Happy to adjust these default values to whatever people think is appropriate.
It's also worth noting that when logging to a file, we lose our custom `slog` formatting. This means the logfile logs look like this:
```
Oct 27 16:02:50.305 INFO Lighthouse started, version: Lighthouse/v2.0.1-8edd9d4+, module: lighthouse:413
Oct 27 16:02:50.305 INFO Configured for network, name: prater, module: lighthouse:414
```
While testing some code on Windows, I ran into a failure when using `clippy` via (`make lint`):
```
error: this expression borrows a reference (`&str`) that is immediately dereferenced by the compiler
--> common/filesystem/src/lib.rs:105:43
|
105 | let mut acl = ACL::from_file_path(&path_str, false).map_err(Error::UnableToRetrieveACL)?;
| ^^^^^^^^^ help: change this to: `path_str`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
error: could not compile `filesystem` due to previous error
```
## Proposed Changes
Remove the unnecessary borrow as suggested.
## Additional Info
Since we are only running `clippy` in CI on Ubuntu, I believe we don't have any way (in CI) to detect these Windows specific lint errors (either from new code, or from linting changes from new Rust versions.
This is because code marked as `#[cfg(windows)]` is not checked on `unix` systems and vice versa.
I'm conscious that our CI runs are already taking a long time, and that adding a new Windows `clippy` run would add a non-negligible amount of time to the runs (not sure if this topic has already been discussed), but it something to be aware of.
## Extra Note
I don't think this is the case, but it might be worth someone else running `make lint` on their Windows machines to eliminate the possibility that this is an error specific to my setup.
## Proposed Changes
* Add the `Eth-Consensus-Version` header to the HTTP API for the block and state endpoints. This is part of the v2.1.0 API that was recently released: https://github.com/ethereum/beacon-APIs/pull/170
* Add tests for the above. I refactored the `eth2` crate's helper functions to make this more straight-forward, and introduced some new mixin traits that I think greatly improve readability and flexibility.
* Add a new `map_with_fork!` macro which is useful for decoding a superstruct type without naming all its variants. It is now used for SSZ-decoding `BeaconBlock` and `BeaconState`, and for JSON-decoding `SignedBeaconBlock` in the API.
## Additional Info
The `map_with_fork!` changes will conflict with the Merge changes, but when resolving the conflict the changes from this branch should be preferred (it is no longer necessary to enumerate every fork). The merge fork _will_ need to be added to `map_fork_name_with`.
I have been in the process of debugging libp2p tasks as there is something locking our executor.
This addition adds a metric allowing us to track all tasks within lighthouse allowing us to identify various sections of Lighthouse code that may be taking longer than normal to process.
## Issue Addressed
When compiling with Rust 1.56.0 the compiler generates 3 instances of this warning:
```
warning: trailing semicolon in macro used in expression position
--> common/eth2_network_config/src/lib.rs:181:24
|
181 | })?;
| ^
...
195 | let deposit_contract_deploy_block = load_from_file!(DEPLOY_BLOCK_FILE);
| ---------------------------------- in this macro invocation
|
= note: `#[warn(semicolon_in_expressions_from_macros)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #79813 <https://github.com/rust-lang/rust/issues/79813>
= note: this warning originates in the macro `load_from_file` (in Nightly builds, run with -Z macro-backtrace for more info)
```
This warning is completely harmless, but will be visible to users compiling Lighthouse v2.0.1 (or earlier) with Rust 1.56.0 (to be released October 21st). It is **completely safe** to ignore this warning, it's just a superficial change to Rust's syntax.
## Proposed Changes
This PR removes the semi-colon as recommended, and fixes the new Clippy lints from 1.56.0
## Description
The `eth2_libp2p` crate was originally named and designed to incorporate a simple libp2p integration into lighthouse. Since its origins the crates purpose has expanded dramatically. It now houses a lot more sophistication that is specific to lighthouse and no longer just a libp2p integration.
As of this writing it currently houses the following high-level lighthouse-specific logic:
- Lighthouse's implementation of the eth2 RPC protocol and specific encodings/decodings
- Integration and handling of ENRs with respect to libp2p and eth2
- Lighthouse's discovery logic, its integration with discv5 and logic about searching and handling peers.
- Lighthouse's peer manager - This is a large module handling various aspects of Lighthouse's network, such as peer scoring, handling pings and metadata, connection maintenance and recording, etc.
- Lighthouse's peer database - This is a collection of information stored for each individual peer which is specific to lighthouse. We store connection state, sync state, last seen ips and scores etc. The data stored for each peer is designed for various elements of the lighthouse code base such as syncing and the http api.
- Gossipsub scoring - This stores a collection of gossipsub 1.1 scoring mechanisms that are continuously analyssed and updated based on the ethereum 2 networks and how Lighthouse performs on these networks.
- Lighthouse specific types for managing gossipsub topics, sync status and ENR fields
- Lighthouse's network HTTP API metrics - A collection of metrics for lighthouse network monitoring
- Lighthouse's custom configuration of all networking protocols, RPC, gossipsub, discovery, identify and libp2p.
Therefore it makes sense to rename the crate to be more akin to its current purposes, simply that it manages the majority of Lighthouse's network stack. This PR renames this crate to `lighthouse_network`
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Update versions to `v2.0.1` in anticipation for a release early next week.
- Add `--ignore` to `cargo audit`. See #2727.
## Additional Info
NA
Currently, the beacon node has no ability to serve the HTTP API over TLS.
Adding this functionality would be helpful for certain use cases, such as when you need a validator client to connect to a backup beacon node which is outside your local network, and the use of an SSH tunnel or reverse proxy would be inappropriate.
## Proposed Changes
- Add three new CLI flags to the beacon node
- `--http-enable-tls`: enables TLS
- `--http-tls-cert`: to specify the path to the certificate file
- `--http-tls-key`: to specify the path to the key file
- Update the HTTP API to optionally use `warp`'s [`TlsServer`](https://docs.rs/warp/0.3.1/warp/struct.TlsServer.html) depending on the presence of the `--http-enable-tls` flag
- Update tests and docs
- Use a custom branch for `warp` to ensure proper error handling
## Additional Info
Serving the API over TLS should currently be considered experimental. The reason for this is that it uses code from an [unmerged PR](https://github.com/seanmonstar/warp/pull/717). This commit provides the `try_bind_with_graceful_shutdown` method to `warp`, which is helpful for controlling error flow when the TLS configuration is invalid (cert/key files don't exist, incorrect permissions, etc).
I've implemented the same code in my [branch here](https://github.com/macladson/warp/tree/tls).
Once the code has been reviewed and merged upstream into `warp`, we can remove the dependency on my branch and the feature can be considered more stable.
Currently, the private key file must not be password-protected in order to be read into Lighthouse.
## Issue Addressed
Fix `cargo audit` failures on `unstable`
Closes#2698
## Proposed Changes
The main culprit is `nix`, which is vulnerable for versions below v0.23.0. We can't get by with a straight-forward `cargo update` because `psutil` depends on an old version of `nix` (cf. https://github.com/rust-psutil/rust-psutil/pull/93). Hence I've temporarily forked `psutil` under the `sigp` org, where I've included the update to `nix` v0.23.0.
Additionally, I took the chance to update the `time` dependency to v0.3, which removed a bunch of stale deps including `stdweb` which is no longer maintained. Lighthouse only uses the `time` crate in the notifier to do some pretty printing, and so wasn't affected by any of the breaking changes in v0.3 ([changelog here](https://github.com/time-rs/time/blob/main/CHANGELOG.md#030-2021-07-30)).
## Proposed Changes
While investigating memory usage I noticed that the malloc metrics were going negative once they passed 2GiB. This is because the underlying `mallinfo` function returns a `i32`, and we were casting it straight to an `i64`, preserving the sign.
The long-term fix will be to move to `mallinfo2`, but it's still not yet widely available.
## Issue Addressed
Fix#2585
## Proposed Changes
Provide a canonical version of test_logger that can be used
throughout lighthouse.
## Additional Info
This allows tests to conditionally emit logging data by adding
test_logger as the default logger. And then when executing
`cargo test --features logging/test_logger` log output
will be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test --features logging/test_logger
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-e20115db6a5e3714)
running 1 test
Sep 10 12:53:45.212 INFO hi, module: test_logger:8
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Or, in normal scenarios where logging isn't needed, executing
`cargo test` the log output will not be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-02e02f8d41e8cf8a)
running 1 test
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
## Proposed Changes
Cut the first release candidate for v2.0.0, in preparation for testing and release this week
## Additional Info
Builds on #2632, which should either be merged first or in the same batch
## Issue Addressed
Closes#2528
## Proposed Changes
- Add `BlockTimesCache` to provide block timing information to `BeaconChain`. This allows additional metrics to be calculated for blocks that are set as head too late.
- Thread the `seen_timestamp` of blocks received from RPC responses (except blocks from syncing) through to the sync manager, similar to what is done for blocks from gossip.
## Additional Info
This provides the following additional metrics:
- `BEACON_BLOCK_OBSERVED_SLOT_START_DELAY_TIME`
- The delay between the start of the slot and when the block was first observed.
- `BEACON_BLOCK_IMPORTED_OBSERVED_DELAY_TIME`
- The delay between when the block was first observed and when the block was imported.
- `BEACON_BLOCK_HEAD_IMPORTED_DELAY_TIME`
- The delay between when the block was imported and when the block was set as head.
The metric `BEACON_BLOCK_IMPORTED_SLOT_START_DELAY_TIME` was removed.
A log is produced when a block is set as head too late, e.g.:
```
Aug 27 03:46:39.006 DEBG Delayed head block set_as_head_delay: Some(21.731066ms), imported_delay: Some(119.929934ms), observed_delay: Some(3.864596988s), block_delay: 4.006257988s, slot: 1931331, proposer_index: 24294, block_root: 0x937602c89d3143afa89088a44bdf4b4d0d760dad082abacb229495c048648a9e, service: beacon
```
## Issue Addressed
NA
## Proposed Changes
As `cargo audit` astutely pointed out, the version of `zeroize_derive` were were using had a vulnerability:
```
Crate: zeroize_derive
Version: 1.1.0
Title: `#[zeroize(drop)]` doesn't implement `Drop` for `enum`s
Date: 2021-09-24
ID: RUSTSEC-2021-0115
URL: https://rustsec.org/advisories/RUSTSEC-2021-0115
Solution: Upgrade to >=1.2.0
```
This PR updates `zeroize` and `zeroize_derive` to appease `cargo audit`.
`tiny-bip39` was also updated to allow compile.
## Additional Info
I don't believe this vulnerability actually affected the Lighthouse code-base directly. However, `tiny-bip39` may have been affected which may have resulted in some uncleaned memory in Lighthouse. Whilst this is not ideal, it's not a major issue. Zeroization is a nice-to-have since it only protects from sophisticated attacks or attackers that already have a high level of access already.
## Issue Addressed
NA
## Proposed Changes
Implements the "union" type from the SSZ spec for `ssz`, `ssz_derive`, `tree_hash` and `tree_hash_derive` so it may be derived for `enums`:
https://github.com/ethereum/consensus-specs/blob/v1.1.0-beta.3/ssz/simple-serialize.md#union
The union type is required for the merge, since the `Transaction` type is defined as a single-variant union `Union[OpaqueTransaction]`.
### Crate Updates
This PR will (hopefully) cause CI to publish new versions for the following crates:
- `eth2_ssz_derive`: `0.2.1` -> `0.3.0`
- `eth2_ssz`: `0.3.0` -> `0.4.0`
- `eth2_ssz_types`: `0.2.0` -> `0.2.1`
- `tree_hash`: `0.3.0` -> `0.4.0`
- `tree_hash_derive`: `0.3.0` -> `0.4.0`
These these crates depend on each other, I've had to add a workspace-level `[patch]` for these crates. A follow-up PR will need to remove this patch, ones the new versions are published.
### Union Behaviors
We already had SSZ `Encode` and `TreeHash` derive for enums, however it just did a "transparent" pass-through of the inner value. Since the "union" decoding from the spec is in conflict with the transparent method, I've required that all `enum` have exactly one of the following enum-level attributes:
#### SSZ
- `#[ssz(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[ssz(enum_behaviour = "transparent")]`
- maintains existing functionality
- not supported for `Decode` (never was)
#### TreeHash
- `#[tree_hash(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[tree_hash(enum_behaviour = "transparent")]`
- maintains existing functionality
This means that we can maintain the existing transparent behaviour, but all existing users will get a compile-time error until they explicitly opt-in to being transparent.
### Legacy Option Encoding
Before this PR, we already had a union-esque encoding for `Option<T>`. However, this was with the *old* SSZ spec where the union selector was 4 bytes. During merge specification, the spec was changed to use 1 byte for the selector.
Whilst the 4-byte `Option` encoding was never used in the spec, we used it in our database. Writing a migrate script for all occurrences of `Option` in the database would be painful, especially since it's used in the `CommitteeCache`. To avoid the migrate script, I added a serde-esque `#[ssz(with = "module")]` field-level attribute to `ssz_derive` so that we can opt into the 4-byte encoding on a field-by-field basis.
The `ssz::legacy::four_byte_impl!` macro allows a one-liner to define the module required for the `#[ssz(with = "module")]` for some `Option<T> where T: Encode + Decode`.
Notably, **I have removed `Encode` and `Decode` impls for `Option`**. I've done this to force a break on downstream users. Like I mentioned, `Option` isn't used in the spec so I don't think it'll be *that* annoying. I think it's nicer than quietly having two different union implementations or quietly breaking the existing `Option` impl.
### Crate Publish Ordering
I've modified the order in which CI publishes crates to ensure that we don't publish a crate without ensuring we already published a crate that it depends upon.
## TODO
- [ ] Queue a follow-up `[patch]`-removing PR.
## Issue Addressed
Closes#1891Closes#1784
## Proposed Changes
Implement checkpoint sync for Lighthouse, enabling it to start from a weak subjectivity checkpoint.
## Additional Info
- [x] Return unavailable status for out-of-range blocks requested by peers (#2561)
- [x] Implement sync daemon for fetching historical blocks (#2561)
- [x] Verify chain hashes (either in `historical_blocks.rs` or the calling module)
- [x] Consistency check for initial block + state
- [x] Fetch the initial state and block from a beacon node HTTP endpoint
- [x] Don't crash fetching beacon states by slot from the API
- [x] Background service for state reconstruction, triggered by CLI flag or API call.
Considered out of scope for this PR:
- Drop the requirement to provide the `--checkpoint-block` (this would require some pretty heavy refactoring of block verification)
Co-authored-by: Diva M <divma@protonmail.com>
Sigma Prime is transitioning our mainnet bootnodes and this PR represents the transition of our bootnodes.
After a few releases, old boot-nodes will be deprecated.
[EIP-3030]: https://eips.ethereum.org/EIPS/eip-3030
[Web3Signer]: https://consensys.github.io/web3signer/web3signer-eth2.html
## Issue Addressed
Resolves#2498
## Proposed Changes
Allows the VC to call out to a [Web3Signer] remote signer to obtain signatures.
## Additional Info
### Making Signing Functions `async`
To allow remote signing, I needed to make all the signing functions `async`. This caused a bit of noise where I had to convert iterators into `for` loops.
In `duties_service.rs` there was a particularly tricky case where we couldn't hold a write-lock across an `await`, so I had to first take a read-lock, then grab a write-lock.
### Move Signing from Core Executor
Whilst implementing this feature, I noticed that we signing was happening on the core tokio executor. I suspect this was causing the executor to temporarily lock and occasionally trigger some HTTP timeouts (and potentially SQL pool timeouts, but I can't verify this). Since moving all signing into blocking tokio tasks, I noticed a distinct drop in the "atttestations_http_get" metric on a Prater node:
I think this graph indicates that freeing the core executor allows the VC to operate more smoothly.
### Refactor TaskExecutor
I noticed that the `TaskExecutor::spawn_blocking_handle` function would fail to spawn tasks if it were unable to obtain handles to some metrics (this can happen if the same metric is defined twice). It seemed that a more sensible approach would be to keep spawning tasks, but without metrics. To that end, I refactored the function so that it would still function without metrics. There are no other changes made.
## TODO
- [x] Restructure to support multiple signing methods.
- [x] Add calls to remote signer from VC.
- [x] Documentation
- [x] Test all endpoints
- [x] Test HTTPS certificate
- [x] Allow adding remote signer validators via the API
- [x] Add Altair support via [21.8.1-rc1](https://github.com/ConsenSys/web3signer/releases/tag/21.8.1-rc1)
- [x] Create issue to start using latest version of web3signer. (See #2570)
## Notes
- ~~Web3Signer doesn't yet support the Altair fork for Prater. See https://github.com/ConsenSys/web3signer/issues/423.~~
- ~~There is not yet a release of Web3Signer which supports Altair blocks. See https://github.com/ConsenSys/web3signer/issues/391.~~
## Proposed Changes
* Modify the `TaskExecutor` so that it spawns a "monitor" future for each future spawned by `spawn` or `spawn_blocking`. This monitor future joins the handle of the child future and shuts down the executor if it detects a panic.
* Enable backtraces by default by setting the environment variable `RUST_BACKTRACE`.
* Spawn the `ProductionBeaconNode` on the `TaskExecutor` so that if a panic occurs during start-up it will take down the whole process. Previously we were using a raw Tokio `spawn`, but I can't see any reason not to use the executor (perhaps someone else can).
## Additional Info
I considered using [`std::panic::set_hook`](https://doc.rust-lang.org/std/panic/fn.set_hook.html) to instantiate a custom panic handler, however this doesn't allow us to send a shutdown signal because `Fn` functions can't move variables (i.e. the shutdown sender) out of their environment. This also prevents it from receiving a `Logger`. Hence I decided to leave the panic handler untouched, but with backtraces turned on by default.
I did a run through the code base with all the raw Tokio spawn functions disallowed by Clippy, and found only two instances where we bypass the `TaskExecutor`: the HTTP API and `InitializedValidators` in the VC. In both places we use `spawn_blocking` and handle the return value, so I figured that was OK for now.
In terms of performance I think the overhead should be minimal. The monitor tasks will just get parked by the executor until their child resolves.
I've checked that this covers Discv5, as the `TaskExecutor` gets injected into Discv5 here: f9bba92db3/beacon_node/src/lib.rs (L125-L126)
## Proposed Changes
This PR deletes all `remote_signer` code from Lighthouse, for the following reasons:
* The `remote_signer` code is unused, and we have no plans to use it now that we're moving to supporting the Web3Signer APIs: #2522
* It represents a significant maintenance burden. The HTTP API tests have been prone to platform-specific failures, and breakages due to dependency upgrades, e.g. #2400.
Although the code is deleted it remains in the Git history should we ever want to recover it. For ease of reference:
- The last commit containing remote signer code: 5a3bcd2904
- The last Lighthouse version: v1.5.1
## Issue Addressed
Resolves#2438Resolves#2437
## Proposed Changes
Changes the permissions for validator client http server api token file and secret key to 600 from 644. Also changes the permission for logfiles generated using the `--logfile` cli option to 600.
Logs the path to the api token instead of the actual api token. Updates docs to reflect the change.
## Issue Addressed
Related to: #2259
Made an attempt at all the necessary updates here to publish the crates to crates.io. I incremented the minor versions on all the crates that have been previously published. We still might run into some issues as we try to publish because I'm not able to test this out but I think it's a good starting point.
## Proposed Changes
- Add description and license to `ssz_types` and `serde_util`
- rename `serde_util` to `eth2_serde_util`
- increment minor versions
- remove path dependencies
- remove patch dependencies
## Additional Info
Crates published:
- [x] `tree_hash` -- need to publish `tree_hash_derive` and `eth2_hashing` first
- [x] `eth2_ssz_types` -- need to publish `eth2_serde_util` first
- [x] `tree_hash_derive`
- [x] `eth2_ssz`
- [x] `eth2_ssz_derive`
- [x] `eth2_serde_util`
- [x] `eth2_hashing`
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Add functionality in the validator monitor to provide sync committee related metrics for monitored validators.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
This PR adds some more fancy macro magic to make it easier to add a new built-in (aka "baked-in") testnet config to the `lighthouse` binary.
Previously, a user needed to modify several files and repeat themselves several times. Now, they only need to add a single definition in the `eth2_config` crate. No repetition 🎉
## Issue Addressed
Resolves#2487
## Proposed Changes
Logs a message once in every invocation of `Eth1Service::update` method if the primary endpoint is unavailable for some reason.
e.g.
```log
Aug 03 00:09:53.517 WARN Error connecting to eth1 node endpoint action: trying fallbacks, endpoint: http://localhost:8545/, service: eth1_rpc
Aug 03 00:09:56.959 INFO Fetched data from fallback fallback_number: 1, service: eth1_rpc
```
The main aim of this PR is to have an accompanying message to the "action: trying fallbacks" error message that is returned when checking the endpoint for liveness. This is mainly to indicate to the user that the fallback was live and reachable.
## Additional info
This PR is not meant to be a catch all for all cases where the primary endpoint failed. For instance, this won't log anything if the primary node was working fine during endpoint liveness checking and failed during deposit/block fetching. This is done intentionally to reduce number of logs while initial deposit/block sync and to avoid more complicated logic.
## Issue Addressed
https://github.com/eth2-clients/eth2-networks/pull/58
## Proposed Changes
Add the fork epoch for Altair on Prater: 36660
## Additional Info
This `config.yaml` is copied exactly from upstream. Large parts already matched due to our preemptive move to the new config style.
## Issue Addressed
NA
## Proposed Changes
- Version bump
- Increase queue sizes for aggregated attestations and re-queued attestations.
## Additional Info
NA
## Proposed Changes
* Consolidate Tokio versions: everything now uses the latest v1.10.0, no more `tokio-compat`.
* Many semver-compatible changes via `cargo update`. Notably this upgrades from the yanked v0.8.0 version of crossbeam-deque which is present in v1.5.0-rc.0
* Many semver incompatible upgrades via `cargo upgrades` and `cargo upgrade --workspace pkg_name`. Notable ommissions:
- Prometheus, to be handled separately: https://github.com/sigp/lighthouse/issues/2485
- `rand`, `rand_xorshift`: the libsecp256k1 package requires 0.7.x, so we'll stick with that for now
- `ethereum-types` is pinned at 0.11.0 because that's what `web3` is using and it seems nice to have just a single version
## Additional Info
We still have two versions of `libp2p-core` due to `discv5` depending on the v0.29.0 release rather than `master`. AFAIK it should be OK to release in this state (cc @AgeManning )
## Issue Addressed
NA
## Proposed Changes
- Bump to `v1.5.0-rc.0`.
- Increase attestation reprocessing queue size (I saw this filling up on Prater).
- Reduce error log for full attn reprocessing queue to warn.
## TODO
- [x] Manual testing
- [x] Resolve https://github.com/sigp/lighthouse/pull/2493
- [x] Include https://github.com/sigp/lighthouse/pull/2501
## Issue Addressed
- Resolves#2457
- Resolves#2443
## Proposed Changes
Target the (presently unreleased) head of `libp2p/rust-libp2p:master` in order to obtain the fix from https://github.com/libp2p/rust-libp2p/pull/2175.
Additionally:
- `libsecp256k1` needed to be upgraded to satisfy the new version of `libp2p`.
- There were also a handful of minor changes to `eth2_libp2p` to suit some interface changes.
- Two `cargo audit --ignore` flags were remove due to libp2p upgrades.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds the Altair fork schedule for Pyrmont, as per https://github.com/eth2-clients/eth2-networks/pull/56 (credits to @ajsutton).
## Additional Info
- I've marked this as `do-not-merge` until the upstream PR is merged.
- I've tagged this for `v1.5.0` because I expect the upstream PR to be merged soon, and I think it would be great if v1.5.0 shipped fully ready for the Pyrmont fork.
## Proposed Changes
* Implement the validator client and HTTP API changes necessary to support Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
- Removing a bunch of unnecessary references
- Updated `Error::VariantError` to `Error::Variant`
- There were additional enum variant lints that I ignored, because I thought our variant names were fine
- removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
This PR addresses two things:
1. Allows the `ValidatorMonitor` to work with Altair states.
1. Optimizes `altair::process_epoch` (see [code](https://github.com/paulhauner/lighthouse/blob/participation-cache/consensus/state_processing/src/per_epoch_processing/altair/participation_cache.rs) for description)
## Breaking Changes
The breaking changes in this PR revolve around one premise:
*After the Altair fork, it's not longer possible (given only a `BeaconState`) to identify if a validator had *any* attestation included during some epoch. The best we can do is see if that validator made the "timely" source/target/head flags.*
Whilst this seems annoying, it's not actually too bad. Finalization is based upon "timely target" attestations, so that's really the most important thing. Although there's *some* value in knowing if a validator had *any* attestation included, it's far more important to know about "timely target" participation, since this is what affects finality and justification.
For simplicity and consistency, I've also removed the ability to determine if *any* attestation was included from metrics and API endpoints. Now, all Altair and non-Altair states will simply report on the head/target attestations.
The following section details where we've removed fields and provides replacement values.
### Breaking Changes: Prometheus Metrics
Some participation metrics have been removed and replaced. Some were removed since they are no longer relevant to Altair (e.g., total attesting balance) and others replaced with gwei values instead of pre-computed values. This provides more flexibility at display-time (e.g., Grafana).
The following metrics were added as replacements:
- `beacon_participation_prev_epoch_head_attesting_gwei_total`
- `beacon_participation_prev_epoch_target_attesting_gwei_total`
- `beacon_participation_prev_epoch_source_attesting_gwei_total`
- `beacon_participation_prev_epoch_active_gwei_total`
The following metrics were removed:
- `beacon_participation_prev_epoch_attester`
- instead use `beacon_participation_prev_epoch_source_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_target_attester`
- instead use `beacon_participation_prev_epoch_target_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_head_attester`
- instead use `beacon_participation_prev_epoch_head_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
The `beacon_participation_prev_epoch_attester` endpoint has been removed. Users should instead use the pre-existing `beacon_participation_prev_epoch_target_attester`.
### Breaking Changes: HTTP API
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint loses the following fields:
- `current_epoch_attesting_gwei` (use `current_epoch_target_attesting_gwei` instead)
- `previous_epoch_attesting_gwei` (use `previous_epoch_target_attesting_gwei` instead)
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint lose the following fields:
- `is_current_epoch_attester` (use `is_current_epoch_target_attester` instead)
- `is_previous_epoch_attester` (use `is_previous_epoch_target_attester` instead)
- `is_active_in_current_epoch` becomes `is_active_unslashed_in_current_epoch`.
- `is_active_in_previous_epoch` becomes `is_active_unslashed_in_previous_epoch`.
## Additional Info
NA
## TODO
- [x] Deal with total balances
- [x] Update validator_inclusion API
- [ ] Ensure `beacon_participation_prev_epoch_target_attester` and `beacon_participation_prev_epoch_head_attester` work before Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2313
## Proposed Changes
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
## Additional Info
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
This updates some older dependencies to address a few cargo audit warnings.
The majority of warnings come from network dependencies which will be addressed in #2389.
This PR contains some minor dep updates that are not network related.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#1661
## Proposed Changes
Add a dummy package called `target_check` which gets compiled early in the build and fails if the target is 32-bit
## Additional Info
You can test the efficacy of this check with:
```
cross build --release --manifest-path lighthouse/Cargo.toml --target i686-unknown-linux-gnu
```
In which case this compilation error is shown:
```
error: Lighthouse requires a 64-bit CPU and operating system
--> common/target_check/src/lib.rs:8:1
|
8 | / assert_cfg!(
9 | | target_pointer_width = "64",
10 | | "Lighthouse requires a 64-bit CPU and operating system",
11 | | );
| |__^
```
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
I've noticed some of the SigP Prater nodes struggling on v1.4.0-rc.0. I suspect this is due to the changes in #2296. Specifically, the trade-off which lowered the memory footprint whilst increasing runtime on some functions.
Presently, this PR is documenting my testing on Prater.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Bump versions.
## Additional Info
This is not exactly the v1.4.0 release described in [Lighthouse Update #36](https://lighthouse.sigmaprime.io/update-36.html).
Whilst it contains:
- Beta Windows support
- A reduction in Eth1 queries
- A reduction in memory footprint
It does not contain:
- Altair
- Doppelganger Protection
- The remote signer
We have decided to release some features early. This is primarily due to the desire to allow users to benefit from the memory saving improvements as soon as possible.
## TODO
- [x] Wait for #2340, #2356 and #2376 to merge and then rebase on `unstable`.
- [x] Ensure discovery issues are fixed (see #2388)
- [x] Ensure https://github.com/sigp/lighthouse/pull/2382 is merged/removed.
- [x] Ensure https://github.com/sigp/lighthouse/pull/2383 is merged/removed.
- [x] Ensure https://github.com/sigp/lighthouse/pull/2384 is merged/removed.
- [ ] Double-check eth1 cache is carried between boots
## Issue Addressed
NA
## Proposed Changes
Reverts #2345 in the interests of getting v1.4.0 out this week. Once we have released that, we can go back to testing this again.
## Additional Info
NA
## Issue Addressed
#2282
## Proposed Changes
Reduce the outbound requests made to eth1 endpoints by caching the results from `eth_chainId` and `net_version`.
Further reduce the overall request count by increasing `auto_update_interval_millis` from `7_000` (7 seconds) to `60_000` (1 minute).
This will result in a reduction from ~2000 requests per hour to 360 requests per hour (during normal operation). A reduction of 82%.
## Additional Info
If an endpoint fails, its state is dropped from the cache and the `eth_chainId` and `net_version` calls will be made for that endpoint again during the regular update cycle (once per minute) until it is back online.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Modify the configuration of [GNU malloc](https://www.gnu.org/software/libc/manual/html_node/The-GNU-Allocator.html) to reduce memory footprint.
- Set `M_ARENA_MAX` to 4.
- This reduces memory fragmentation at the cost of contention between threads.
- Set `M_MMAP_THRESHOLD` to 2mb
- This means that any allocation >= 2mb is allocated via an anonymous mmap, instead of on the heap/arena. This reduces memory fragmentation since we don't need to keep growing the heap to find big contiguous slabs of free memory.
- ~~Run `malloc_trim` every 60 seconds.~~
- ~~This shaves unused memory from the top of the heap, preventing the heap from constantly growing.~~
- Removed, see: https://github.com/sigp/lighthouse/pull/2299#issuecomment-825322646
*Note: this only provides memory savings on the Linux (glibc) platform.*
## Additional Info
I'm going to close#2288 in favor of this for the following reasons:
- I've managed to get the memory footprint *smaller* here than with jemalloc.
- This PR seems to be less of a dramatic change than bringing in the jemalloc dep.
- The changes in this PR are strictly runtime changes, so we can create CLI flags which disable them completely. Since this change is wide-reaching and complex, it's nice to have an easy "escape hatch" if there are undesired consequences.
## TODO
- [x] Allow configuration via CLI flags
- [x] Test on Mac
- [x] Test on RasPi.
- [x] Determine if GNU malloc is present?
- I'm not quite sure how to detect for glibc.. This issue suggests we can't really: https://github.com/rust-lang/rust/issues/33244
- [x] Make a clear argument regarding the affect of this on CPU utilization.
- [x] Test with higher `M_ARENA_MAX` values.
- [x] Test with longer trim intervals
- [x] Add some stats about memory savings
- [x] Remove `malloc_trim` calls & code
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Add unit tests for the various CLI flags associated with the beacon node and validator client. These changes require the addition of two new flags: `dump-config` and `immediate-shutdown`.
## Additional Info
Both `dump-config` and `immediate-shutdown` are marked as hidden since they should only be used in testing and other advanced use cases.
**Note:** This requires changing `main.rs` so that the flags can adjust the program behavior as necessary.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#2276
## Proposed Changes
Add the `SensitiveUrl` struct which wraps `Url` and implements custom `Display` and `Debug` traits to redact user secrets from being logged in eth1 endpoints, beacon node endpoints and metrics.
## Additional Info
This also includes a small rewrite of the eth1 crate to make requests using `Url` instead of `&str`.
Some error messages have also been changed to remove `Url` data.
## Issue Addressed
None
## Proposed Changes
Adds support for downloading the deposit contract from a different location
by setting the environement variables `LIGHTHOUSE_DEPOSIT_CONTRACT_SPEC_URL`
and `LIGHTHOUSE_DEPOSIT_CONTRACT_TESTNET_URL`.
It also adds support to fetch the content from a local file:// URL.
This allows pre fetching to build in an environment without network access.
## Additional Info
Being able to build without network access is required to package the application for https://nixos.org/. But I imagine it might be useful for other distributions too.
## Issue Addressed
NA
## Proposed Changes
Bump versions.
## Additional Info
This is a minor release (not patch) due to the very slight change introduced by #2291.
## Issue Addressed
NA
## Proposed Changes
- Adds a specific log and metric for when a block is enshrined as head with a delay that will caused bad attestations
- We *technically* already expose this information, but it's a little tricky to determine during debugging. This makes it nice and explicit.
- Fixes a minor reporting bug with the validator monitor where it was expecting agg. attestations too early (at half-slot rather than two-thirds-slot).
## Additional Info
NA
## Issue Addressed
Closes#2274
## Proposed Changes
* Modify the `YamlConfig` to collect unknown fields into an `extra_fields` map, instead of failing hard.
* Log a debug message if there are extra fields returned to the VC from one of its BNs.
This restores Lighthouse's compatibility with Teku beacon nodes (and therefore Infura)
## Issue Addressed
#2224
## Proposed Changes
Add a `--password-file` option to the `lighthouse account validator import` command. The flag requires `--reuse-password` and will copy the password over to the `validator_definitions.yml` file. I used #2070 as a guide for validating the password as UTF-8 and stripping newlines.
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1944
## Proposed Changes
Adds a "graffiti" key to the `validator_definitions.yml`. Setting the key will override anything passed through the validator `--graffiti` flag.
Returns an error if the value for the graffiti key is > 32 bytes instead of silently truncating.
## Proposed Changes
When building the release binaries with Cross, Ubuntu 16.04 is used, which uses an old verison of Git lacking support for `--exclude`. This PR changes `lighthouse_version` to use `--match` instead.
## Issue Addressed
NA
## Problem this PR addresses
There's an issue where Lighthouse is banning a lot of peers due to the following sequence of events:
1. Gossip block 0xabc arrives ~200ms early
- It is propagated across the network, with respect to [`MAXIMUM_GOSSIP_CLOCK_DISPARITY`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/p2p-interface.md#why-is-there-maximum_gossip_clock_disparity-when-validating-slot-ranges-of-messages-in-gossip-subnets).
- However, it is not imported to our database since the block is early.
2. Attestations for 0xabc arrive, but the block was not imported.
- The peer that sent the attestation is down-voted.
- Each unknown-block attestation causes a score loss of 1, the peer is banned at -100.
- When the peer is on an attestation subnet there can be hundreds of attestations, so the peer is banned quickly (before the missed block can be obtained via rpc).
## Potential solutions
I can think of three solutions to this:
1. Wait for attestation-queuing (#635) to arrive and solve this.
- Easy
- Not immediate fix.
- Whilst this would work, I don't think it's a perfect solution for this particular issue, rather (3) is better.
1. Allow importing blocks with a tolerance of `MAXIMUM_GOSSIP_CLOCK_DISPARITY`.
- Easy
- ~~I have implemented this, for now.~~
1. If a block is verified for gossip propagation (i.e., signature verified) and it's within `MAXIMUM_GOSSIP_CLOCK_DISPARITY`, then queue it to be processed at the start of the appropriate slot.
- More difficult
- Feels like the best solution, I will try to implement this.
**This PR takes approach (3).**
## Changes included
- Implement the `block_delay_queue`, based upon a [`DelayQueue`](https://docs.rs/tokio-util/0.6.3/tokio_util/time/delay_queue/struct.DelayQueue.html) which can store blocks until it's time to import them.
- Add a new `DelayedImportBlock` variant to the `beacon_processor::WorkEvent` enum to handle this new event.
- In the `BeaconProcessor`, refactor a `tokio::select!` to a struct with an explicit `Stream` implementation. I experienced some issues with `tokio::select!` in the block delay queue and I also found it hard to debug. I think this explicit implementation is nicer and functionally equivalent (apart from the fact that `tokio::select!` randomly chooses futures to poll, whereas now we're deterministic).
- Add a testing framework to the `beacon_processor` module that tests this new block delay logic. I also tested a handful of other operations in the beacon processor (attns, slashings, exits) since it was super easy to copy-pasta the code from the `http_api` tester.
- To implement these tests I added the concept of an optional `work_journal_tx` to the `BeaconProcessor` which will spit out a log of events. I used this in the tests to ensure that things were happening as I expect.
- The tests are a little racey, but it's hard to avoid that when testing timing-based code. If we see CI failures I can revise. I haven't observed *any* failures due to races on my machine or on CI yet.
- To assist with testing I allowed for directly setting the time on the `ManualSlotClock`.
- I gave the `beacon_processor::Worker` a `Toolbox` for two reasons; (a) it avoids changing tons of function sigs when you want to pass a new object to the worker and (b) it seemed cute.
## Proposed Changes
Somehow since Lighthouse v1.1.3 the behaviour of `git-describe` has changed so that it includes the version tag, the number of commits since that tag, _and_ the commit. According to the docs this is how it should always have behaved?? Weird!
https://git-scm.com/docs/git-describe/2.30.1
Anyway, this lead to `lighthouse_version` producing this monstrosity of a version string when building #2194:
```
Lighthouse/v1.1.3-v1.1.3-5-gac07
```
Observe it in the wild here: https://pyrmont.beaconcha.in/block/694880
Adding `--exclude="*"` prevents `git-describe` from trying to include the tag, and on that troublesome commit from #2194 it now produces the correct version string.
## Issue Addressed
N/A
## Proposed Changes
This is mostly a UX improvement.
Currently, when recursively finding keystores, we only ignore keystores with same path.This leads to potential issues while copying datadirs (e.g. copying datadir to a new ssd with more storage). After copying new datadir and starting the vc, we will discover the copied keystores as new keystores and add it to the definitions file leading to duplicate entries.
This PR avoids duplicate keystores being discovered as new keystore by checking for duplicate pubkeys as well.
## Issue Addressed
resolves#2129resolves#2099
addresses some of #1712
unblocks #2076
unblocks #2153
## Proposed Changes
- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR.
- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.
- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue` --> PR in discv5: https://github.com/sigp/discv5/pull/58
## Additional Info
tokio 1.0 changes that required some changes in lighthouse:
- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Adds some metrics to track delays regarding:
- LH processing of blocks
- delays receiving blocks from other nodes.
## Additional Info
NA
## Issue Addressed
- Resolves#2064
## Proposed Changes
Adds a `ValidatorMonitor` struct which provides additional logging and Grafana metrics for specific validators.
Use `lighthouse bn --validator-monitor` to automatically enable monitoring for any validator that hits the [subnet subscription](https://ethereum.github.io/eth2.0-APIs/#/Validator/prepareBeaconCommitteeSubnet) HTTP API endpoint.
Also, use `lighthouse bn --validator-monitor-pubkeys` to supply a list of validators which will always be monitored.
See the new docs included in this PR for more info.
## TODO
- [x] Track validator balance, `slashed` status, etc.
- [x] ~~Register slashings in current epoch, not offense epoch~~
- [ ] Publish Grafana dashboard, update TODO link in docs
- [x] ~~#2130 is merged into this branch, resolve that~~
## Issue Addressed
NA
## Proposed Changes
Copied from #2083, changes the config milliseconds_per_slot to seconds_per_slot to avoid errors when slot duration is not a multiple of a second. To avoid deserializing old serialized data (with milliseconds instead of seconds) the Serialize and Deserialize derive got removed from the Spec struct (isn't currently used anyway).
This PR replaces #2083 for the purpose of fixing a merge conflict without requiring the input of @blacktemplar.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
`test_dht_persistence` failing
## Proposed Changes
Bind `NetworkService::start` to an underscore prefixed variable rather than `_`. `_` was causing it to be dropped immediately
This was failing 5/100 times before this update, but I haven't been able to get it to fail after updating it
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Fixes#2141
Remove [tempdir](https://docs.rs/tempdir/0.3.7/tempdir/) in favor of [tempfile](https://docs.rs/tempfile/3.1.0/tempfile/).
## Proposed Changes
`tempfile` has a slightly different api that makes creating temp folders with a name prefix a chore (`tempdir::TempDir::new("toto")` => `tempfile::Builder::new().prefix("toto").tempdir()`).
So I removed temp folder name prefix where I deemed it not useful.
Otherwise, the functionality is the same.
## Issue Addressed
Catching up to a recently merged API spec PR: https://github.com/ethereum/eth2.0-APIs/pull/119
## Proposed Changes
- Return an SSZ beacon state on `/eth/v1/debug/beacon/states/{stateId}` when passed this header: `accept: application/octet-stream`.
- requests to this endpoint with no `accept` header or an `accept` header and a value of `application/json` or `*/*` , or will result in a JSON response
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
- Resolves#1883
## Proposed Changes
This follows on from @blacktemplar's work in #2018.
- Allows the VC to connect to multiple BN for redundancy.
- Update the simulator so some nodes always need to rely on their fallback.
- Adds some extra deprecation warnings for `--eth1-endpoint`
- Pass `SignatureBytes` as a reference instead of by value.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Replaces #2091
## Proposed Changes
* Delete the uncompressed genesis states from `eth2_network_config` after they were merged accidentally in #2029.
* Tweak the build script to not overwrite `genesis.ssz` on every build, which caused spurious rebuilds.
## Proposed Changes
Run cargo update and bump version in prep for v1.0.4 release
## Additional Info
Planning to merge this commit to `unstable`, test on Pyrmont and canary nodes, then push to `stable`.
## Issue Addressed
#1992 and #1987, and also to be considered a continuation of #1751
## Proposed Changes
many changed files but most are renaming to align the code with the semantics of `--network`
- remove the `--network` default value (in clap) and instead set it after checking the `network` and `testnet-dir` flags
- move `eth2_testnet_config` crate to `eth2_network_config`
- move `Eth2TestnetConfig` to `Eth2NetworkConfig`
- move `DEFAULT_HARDCODED_TESTNET` to `DEFAULT_HARDCODED_NETWORK`
- `beacon_node`s `get_eth2_testnet_config` loads the `DEFAULT_HARDCODED_NETWORK` if there is no network nor testnet provided
- `boot_node`s config loads the config same as the `beacon_node`, it was using the configuration only for preconfigured networks (That code is ~1year old so I asume it was not intended)
- removed a one year old comment stating we should try to emulate `https://github.com/eth2-clients/eth2-testnets/tree/master/nimbus/testnet1` it looks outdated (?)
- remove `lighthouse`s `load_testnet_config` in favor of `get_eth2_network_config` to centralize that logic (It had differences)
- some spelling
## Additional Info
Both the command of #1992 and the scripts of #1987 seem to work fine, same as `bn` and `vc`
## Issue Addressed
NA
## Proposed Changes
Updates out of date dependencies.
## Additional Info
See also https://github.com/sigp/lighthouse/issues/1712 for a list of dependencies that are still out of date and the resasons.
## Issue Addressed
Resolves#1434 (this is the last major feature in the standard spec. There are only a couple of places we may be off-spec due to recent spec changes or ongoing discussion)
Partly addresses #1669
## Proposed Changes
- remove the websocket server
- remove the `TeeEventHandler` and `NullEventHandler`
- add server sent events according to the eth2 API spec
## Additional Info
This is according to the currently unmerged PR here: https://github.com/ethereum/eth2.0-APIs/pull/117
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fixes a couple of low hanging fruits.
- Fixes#2037
- `validators-dir` and `secrets-dir` flags don't really need to depend upon each other
- Fixes#2006 and Fixes#1995
Update lighthouse to version `v1.0.2`.
There are two major updates in this version:
- Updates to the task executor to tokio 0.3 and all sub-dependencies relying on core execution, including libp2p
- Update BLST
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
part of #1883
## Proposed Changes
Adds a new cli argument `--eth1-endpoints` that can be used instead of `--eth1-endpoint` to specify a comma-separated list of endpoints. If the first endpoint returns an error for some request the other endpoints are tried in the given order.
## Additional Info
Currently if the first endpoint fails the fallbacks are used silently (except for `try_fallback_test_endpoint` that is used in `do_update` which logs a `WARN` for each endpoint that is not reachable). A question is if we should add more logs so that the user gets warned if his main endpoint is for example just slow and sometimes hits timeouts.
## Issue Addressed
Closes#1823
## Proposed Changes
* Use OS-level file locking for validator keystores, eliminating problems with lockfiles lingering after ungraceful shutdowns (`SIGKILL`, power outage). I'm using the `fs2` crate because it's cross-platform (unlike `file-lock`), and it seems to have the most downloads on crates.io.
* Deprecate + disable `--delete-lockfiles` CLI param, it's no longer necessary
* Delete the `validator_dir::Manager`, as it was mostly dead code and was only used in the `validator list` command, which has been rewritten to read the validator definitions YAML instead.
## Additional Info
Tested on:
- [x] Linux
- [x] macOS
- [x] Docker Linux
- [x] Docker macOS
- [ ] Windows
## Issue Addressed
NA
## Proposed Changes
- Adds a HTTP server to the VC which provides Prometheus metrics.
- Moves the health metrics into the `lighthouse_metrics` crate so it can be shared between BN/VC.
- Sprinkle some metrics around the VC.
- Update the book to indicate that we now have VC metrics.
- Shifts the "waiting for genesis" logic later in the `ProductionValidatorClient::new_from_cli`
- This is worth attention during the review.
## Additional Info
- ~~`clippy` has some new lints that are failing. I'll deal with that in another PR.~~
## Issue Addressed
Boot nodes were being successfully created and publishing valid ENRs however the `eth2` field was not being saved to disk leading to a discrepancy between published ENR and disk ENR.
If the `eth2` field is known, it is now constructed in the initial ENR and saved to disk.
Previous mainnet bootnodes did not contain the `eth2` field and these have also been updated.
This is an implementation of a slasher that lives inside the BN and can be enabled via `lighthouse bn --slasher`.
Features included in this PR:
- [x] Detection of attester slashing conditions (double votes, surrounds existing, surrounded by existing)
- [x] Integration into Lighthouse's attestation verification flow
- [x] Detection of proposer slashing conditions
- [x] Extraction of attestations from blocks as they are verified
- [x] Compression of chunks
- [x] Configurable history length
- [x] Pruning of old attestations and blocks
- [x] More tests
Future work:
* Focus on a slice of history separate from the most recent N epochs (e.g. epochs `current - K` to `current - M`)
* Run out-of-process
* Ingest attestations from the chain without a resync
Design notes are here https://hackmd.io/@sproul/HJSEklmPL
## Issue Addressed
- Resolves#1424
## Proposed Changes
Add a `GET lighthouse/staking` that returns 200 if the node is ready to stake (i.e., `--eth1` flag is present) or a 404 otherwise.
Whilst the VC is waiting for the genesis time to start (i.e., when the genesis state is known), check the `lighthouse/staking` endpoint and log an error if the node isn't configured for staking.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Caches later blocks than is required by `ETH1_FOLLOW_DISTANCE`.
- Adds logging to `warn` if the eth1 cache is insufficiently primed.
- Use `max_by_key` instead of `max_by` in `BeaconChain::Eth1Chain` since it's simpler.
- Rename `voting_period_start_timestamp` to `voting_target_timestamp` for accuracy.
## Additional Info
The reason for eating into the `ETH1_FOLLOW_DISTANCE` and caching blocks that are closer to the head is due to possibility for `SECONDS_PER_ETH1_BLOCK` to be incorrect (as is the case for the Pyrmont testnet on Goerli).
If `SECONDS_PER_ETH1_BLOCK` is too short, we'll skip back too far from the head and skip over blocks that would be valid [`is_candidate_block`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/validator.md#eth1-data) blocks. This was the case on the Pyrmont testnet and resulted in Lighthouse choosing blocks that were about 30 minutes older than is ideal.
## Issue Addressed
Closes#1889
## Proposed Changes
- Error when passwords which use invalid UTF-8 characters during encryption.
- Add some tests
## Additional Info
I've decided to error when bad characters are used to create/encrypt a keystore but think we should allow them during decryption since either the keystore was created
- with invalid UTF-8 characters (possibly by another client or someone whose password is random bytes) in which case we'd want them to be able to decrypt their keystore using the right key.
- without invalid characters then the password checksum would almost certainly fail.
Happy to add them to decryption if we want to make the decryption more trigger happy 😋 , it would only be a one line change and would tell the user which character index is causing the issue.
See https://eips.ethereum.org/EIPS/eip-2335#password-requirements
## Issue Addressed
Catching up on a few eth2 spec updates:
## Proposed Changes
- adding query params to the `GET pool/attestations` endpoint
- allowing the `POST pool/attestations` endpoint to accept an array of attestations
- batching attestation submission
- moving `epoch` from a path param to a query param in the `committees` endpoint
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Password length check too short (https://github.com/sigp/lighthouse/issues/1880)
## Proposed Changes
I've added function that counts number of unicode characters, instead of calling String::len()
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Replace Zinken with Pyrmont (Zinken has been sun-setted).
- Ensure Mainnet is build in the build script.
## Additional Info
NA
## Issue Addressed
#1606
## Proposed Changes
Uses dynamic gossipsub scoring parameters depending on the number of active validators as specified in https://gist.github.com/blacktemplar/5c1862cb3f0e32a1a7fb0b25e79e6e2c.
## Additional Info
Although the parameters got tested on Medalla, extensive testing using simulations on larger networks is still to be done and we expect that we need to change the parameters, although this might only affect constants within the dynamic parameter framework.
## Issue Addressed
NA
## Proposed Changes
Adds support for the [Toledo](https://github.com/protolambda/toledo) dev-net.
```bash
lighthouse --testnet toledo bn --http
```
This is for development only, we do not recommend users to join this testnet.
## Additional Info
- ~~Blocked on #1862~~
## Issue Addressed
Resolves#1809Resolves#1824Resolves#1818Resolves#1828 (hopefully)
## Proposed Changes
- add `validator_index` to the proposer duties endpoint
- add the ability to query for historical proposer duties
- `StateId` deserialization now fails with a 400 warp rejection
- add the `validator_balances` endpoint
- update the `aggregate_and_proofs` endpoint to accept an array
- updates the attester duties endpoint from a `GET` to a `POST`
- reduces the number of times we query for proposer duties from once per slot per validator to only once per slot
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
We seem to have roll backed to old discv5 bootnodes with #1799 because of which fresh nodes with no cached peers cannot find any peers.
## Proposed Changes
Updates `boot_enr.yaml` to discv5.1 bootnodes.
## Issue Addressed
- Related to #1691
## Proposed Changes
Adds the following API endpoints:
- `GET lighthouse/eth1/syncing`: status about how synced we are with Eth1.
- `GET lighthouse/eth1/block_cache`: all locally cached eth1 blocks.
- `GET lighthouse/eth1/deposit_cache`: all locally cached eth1 deposits.
Additionally:
- Moves some types from the `beacon_node/eth1` to the `common/eth2` crate, so they can be used in the API without duplication.
- Allow `update_deposit_cache` and `update_block_cache` to take an optional head block number to avoid duplicate requests.
## Additional Info
TBC
## Issue Addressed
Resolve#1652
## Proposed Changes
Adds a cli option for voluntary exits. The flow is similar to prysm's where after entering the password for the validator keystore (or load password from `secrets` if present) the user is given multiple warnings about the operation being irreversible, then redirected to the docs webpage(not added yet) which explains what a voluntary exit is and the consequences of exiting and then prompted to enter a phrase from the docs webpage as a final confirmation.
Example usage
```
$ lighthouse --testnet zinken account validator exit --validator <validator-pubkey> --beacon-node http://localhost:5052
Running account manager for zinken testnet
validator-dir path: "..."
Enter the keystore password: for validator in ...
Password is correct
Publishing a voluntary exit for validator: ...
WARNING: This is an irreversible operation
WARNING: Withdrawing staked eth will not be possible until Eth1/Eth2 merge Please visit [website] to make sure you understand the implications of a voluntary exit.
Enter the phrase from the above URL to confirm the voluntary exit:
Exit my validator
Published voluntary exit for validator ...
```
## Additional info
Not sure if we should have batch exits (`--validator all`) option for exiting all the validators in the `validators` directory. I'm slightly leaning towards having only single exits but don't have a strong preference.
## Issue Addressed
Michael's comment here: https://github.com/sigp/lighthouse/issues/1434#issuecomment-708834079Resolves#1808
## Proposed Changes
- Add query param `id` and `status` to the `validators` endpoint
- Add string serialization and deserialization for `ValidatorStatus`
- Drop `Epoch` from `ValidatorStatus` variants
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
Closes#1504Closes#1505
Replaces #1703Closes#1707
## Proposed Changes
* Update BLST and Milagro to versions compatible with BLSv4 spec
* Update Lighthouse to spec v1.0.0-rc.0, and update EF test vectors
* Use the v1.0.0 constants for `MainnetEthSpec`.
* Rename `InteropEthSpec` -> `V012LegacyEthSpec`
* Change all constants to suit the mainnet `v0.12.3` specification (i.e., Medalla).
* Deprecate the `--spec` flag for the `lighthouse` binary
* This value is now obtained from the `config_name` field of the `YamlConfig`.
* Built in testnet YAML files have been updated.
* Ignore the `--spec` value, if supplied, log a warning that it will be deprecated
* `lcli` still has the spec flag, that's fine because it's dev tooling.
* Remove the `E: EthSpec` from `YamlConfig`
* This means we need to deser the genesis `BeaconState` on-demand, but this is fine.
* Swap the old "minimal", "mainnet" strings over to the new `EthSpecId` enum.
* Always require a `CONFIG_NAME` field in `YamlConfig` (it used to have a default).
## Additional Info
Lots of breaking changes, do not merge! ~~We will likely need a Lighthouse v0.4.0 branch, and possibly a long-term v0.3.0 branch to keep Medalla alive~~.
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Related to #1691
## Proposed Changes
- Add `DEPOSIT_CHAIN_ID` and `DEPOSIT_NETWORK_ID` to `config.yaml`.
- Pass the `DEPOSIT_NETWORK_ID` to the `eth1::Service`.
- Remove the unused `MAX_EPOCHS_PER_CROSSLINK` from the `altona` and `medalla` configs (see [spec commit](2befe90032 (diff-efb845ac2ebd4aafbc23df40f47ce25699255064e99d36d0406d0a14ca7953ec))).
- Change from compressing the whole testnet directory, to only compressing the genesis state file. This is the only file we need to compress and *not* compressing the others makes them work nicely with git.
- We can modify the boot nodes, configs, etc. without incurring an eternal binary-blob cost on our git history.
- This change is backwards compatible (i.e., non-breaking).
## Additional Info
NA
## Overview
This updates lighthouse to discovery v5.1
Note: This makes lighthouse's discovery not compatible with any previous version. Lighthouse cannot discover peers or send/receive ENR's from any previous version. This is a breaking change.
This resolves#1605
## Issue Addressed
Potentially resolves#1647 and sync stalls.
## Proposed Changes
The handling of the state of banned peers was inadequate for the complex peerdb data structure. We store a limited number of disconnected and banned peers in the db. We were not tracking intermediate "disconnecting" states and the in some circumstances we were updating the peer state without informing the peerdb. This lead to a number of inconsistencies in the peer state.
Further, the peer manager could ban a peer changing a peer's state from being connected to banned. In this circumstance, if the peer then disconnected, we didn't inform the application layer, which lead to applications like sync not being informed of a peers disconnection. This could lead to sync stalling and having to require a lighthouse restart.
Improved handling for peer states and interactions with the peerdb is made in this PR.
## Issue Addressed
NA
## Proposed Changes
Adds a `lighthouse/beacon/states/:state_id/ssz` endpoint to allow us to pull the genesis state from the API.
## Additional Info
NA
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
`node` endpoints in #1434
## Proposed Changes
Implement these:
```
/eth/v1/node/health
/eth/v1/node/peers/{peer_id}
/eth/v1/node/peers
```
- Add an `Option<Enr>` to `PeerInfo`
- Finish implementation of `/eth/v1/node/identity`
## Additional Info
- should update the `peers` endpoints when #1764 is resolved
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#1557
## Proposed Changes
Modify the pruning algorithm so that it mutates the head-tracker _before_ committing the database transaction to disk, and _only if_ all the heads to be removed are still present in the head-tracker (i.e. no concurrent mutations).
In the process of writing and testing this I also had to make a few other changes:
* Use internal mutability for all `BeaconChainHarness` functions (namely the RNG and the graffiti), in order to enable parallel calls (see testing section below).
* Disable logging in harness tests unless the `test_logger` feature is turned on
And chose to make some clean-ups:
* Delete the `NullMigrator`
* Remove type-based configuration for the migrator in favour of runtime config (simpler, less duplicated code)
* Use the non-blocking migrator unless the blocking migrator is required. In the store tests we need the blocking migrator because some tests make asserts about the state of the DB after the migration has run.
* Rename `validators_keypairs` -> `validator_keypairs` in the `BeaconChainHarness`
## Testing
To confirm that the fix worked, I wrote a test using [Hiatus](https://crates.io/crates/hiatus), which can be found here:
https://github.com/michaelsproul/lighthouse/tree/hiatus-issue-1557
That test can't be merged because it inserts random breakpoints everywhere, but if you check out that branch you can run the test with:
```
$ cd beacon_node/beacon_chain
$ cargo test --release --test parallel_tests --features test_logger
```
It should pass, and the log output should show:
```
WARN Pruning deferred because of a concurrent mutation, message: this is expected only very rarely!
```
## Additional Info
This is a backwards-compatible change with no impact on consensus.
## Issue Addressed
Resolves#1744
## Proposed Changes
- Add `directory::ensure_dir_exists` to the `ValidatorDefinition::open_or_create` method
- As @pawanjay176 suggested, making the `--validator-dir` non-global so users are forced to include the flag after the `validator` subcommand. Current behavior seems to be ignoring the flag if it comes after something like `validator import`
## Additional Info
N/A
## Issue Addressed
- Resolves#1722
## Proposed Changes
This extends @danielschonfeld's work in #1739 with:
- Use an empty boot node list
- Remove the genesis state
## Additional Info
NA
Co-authored-by: Daniel Schonfeld <daniel@schonfeld.org>
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
* Initial rebase
* Remove old code
* Correct release tests
* Rebase commit
* Remove eth2-testnet dep on eth2libp2p
* Remove crates lost in rebase
* Remove unused dep
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Resolves#1651
## Description
This supercedes #1658. Great work was done by @pawanjay176, I just needed to make a change whilst he is away.
See #1658 for a description, prior reviews and approval by @michaelsproul.
## Additional info
Ignores a rustsec advisory. This is tracked in #1669.
Co-authored-by: pawan <pawandhananjay@gmail.com>
## Issue Addressed
#1437
## Proposed Changes
- Make the `--wallet-password` flag optional and creates an interactive prompt if not provided.
- Make the `--wallet-name` flag optional and creates an interactive prompt if not provided.
- Add a minimum password requirement of a 12 character length.
- Update the `--stdin-passwords` flag to `--stdin-inputs` because we have non-password user inputs
## Additional Info
## Issue Addressed
#1431
## Proposed Changes
Added an archived zip file with required files manually
## Additional Info
1) Used zip, instead of tar.gz to add a single dependency instead of two.
2) I left the download from github code for now, waiting to hear if you'd like it cleaned up or left to be used for some tooling needs.
## Issue Addressed
N/A
## Proposed Changes
Add a `lighthouse am wallet recover` command that recreates a wallet from a mnemonic but no validator keys. Add a `lighthouse am validator recover` command which would directly create keys from a mnemonic for a given index and count.
## Additional Info
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
Adds extended metrics to get a better idea of what is happening at the gossipsub layer of lighthouse. This provides information about mesh statistics per topics, subscriptions and peer scores.
## Additional Info
## Issue Addressed
NA
## Proposed Changes
Shift practically all HTTP endpoint handlers to the blocking executor (some very light tasks are left on the core executor).
## Additional Info
This PR covers the `rest_api` which will soon be refactored to suit the standard API. As such, I've cut a few corners and left some existing issues open in this patch. What I have done here should leave the API in state that is not necessary *exactly* the same, but good enough for us to run validators with. Specifically, the number of blocking workers that can be spawned is unbounded and I have not implemented a queue; this will need to be fixed when we implement the standard API.
## Issue Addressed
- Resolves#1361
## Proposed Changes
Loosens the constraints imposed by EIP-2335 so we can import keys from Prysm.
## Additional Info
NA
## Overview
There are forked chains which get referenced by blocks and attestations on a network. Typically if these chains are very long, we stop looking up the chain and downvote the peer. In extreme circumstances, many peers are on many chains, the chains can be very deep and become time consuming performing lookups.
This PR adds a cache to known failed chain lookups. This prevents us from starting a parent-lookup (or stopping one half way through) if we have attempted the chain lookup in the past.
## Issue Addressed
NA
## Proposed Changes
Moves beacon block processing over to the newly-added `GossipProcessor`. This moves the task off the core executor onto the blocking one.
## Additional Info
- With this PR, gossip blocks are being ignored during sync.
## Issue Addressed
N/A
## Proposed Changes
Earlier, to log to a file, the only options were to redirect stdout/stderr to a file or use json logging.
Redirecting to stdout/stderr works well but causes issues with mistakenly overwriting the file instead of appending which has resulted in loss of precious logs on multiple occasions for me.
Json logging creates a timestamped backup of the file if it already exists, but the json format itself is hugely annoying.
This PR modifies the `--logfile` option to log as it does in the terminal to a logfile.
## Issue Addressed
NA
## Proposed Changes
Adds support for using the [`cross`](https://github.com/rust-embedded/cross) project to produce cross-compiled binaries using Docker images.
Provides quite clean and simple cross-compiles cause all the complexity is hidden in Dockerfiles. It does require you to be in the `docker` group though.
## Details
- Adds shortcut commands to `Makefile`
- Ensures `reqwest` and `discv5` use vendored openssl libs (i.e., static not shared).
- Switches to a [commit](284f705964) of blst that has a renamed C function to avoid a collision with openssl (upstream issue: https://github.com/supranational/blst/issues/21).
- Updates `ring` to the latest satisfiable version, since an earlier version was causing issues with `cross`.
- Off-topic, but adds extra message about Windows support as suggested by Discord user.
## Additional Info
- ~~Blocked on #1495~~
- There are no tests in CI for this yet for a few reasons:
- I'm hesitant to add more long-running tasks.
- Short-term bitrot should be avoided since we'll use it each release.
- In the long term I think it would be good to automate binary creation on a release.
- I observed the binaries increase in size from 50mb to 52mb after these changes.
## Issue Addressed
#1419
## Proposed Changes
Creates a `--graffiti` cli flag in the validator client. If the flag is set, it overrides graffiti in the beacon node.
## Additional Info
