## Issue Addressed
N/A
## Proposed Changes
The current Advanced Networking page references the ["--listen-addresses"](14924dbc95/book/src/advanced_networking.md (L124C8-L124C8)) argument, which does not exist in the beacon node. This PR changes such instances of "--listen-addresses" to "--listen-address".
Additionally, the page mentions using sockets that [both listen to IPv6](14924dbc95/book/src/advanced_networking.md (L151)) in a dual-stack setup? Hence, this PR also changes said line to "using one socket for IPv4 and another socket for IPv6".
## Additional Info
None.
## Proposed Changes
New release to replace the cancelled v4.4.0 release.
This release includes the bugfix #4687 which avoids a deadlock that was present in v4.4.0.
## Additional Info
Awaiting testing over the weekend this will be merged Monday September 4th.
## Issue Addressed
Fix a deadlock introduced in #4236 which was caught during the v4.4.0 release testing cycle (with thanks to @paulhauner and `gdb`).
## Proposed Changes
Avoid re-locking the fork choice read lock when querying a state by root in the HTTP API. This avoids a deadlock due to the lock already being held.
## Additional Info
The [RwLock docs](https://docs.rs/lock_api/latest/lock_api/struct.RwLock.html#method.read) explicitly advise against re-locking:
> Note that attempts to recursively acquire a read lock on a RwLock when the current thread already holds one may result in a deadlock.
## Issue Addressed
N/A
## Proposed Changes
Adds the Chiado (Gnosis testnet) network to the builtin one.
## Additional Info
It's a fairly trivial change all things considered as the preset already exists, so shouldn't be hard to maintain.
It compiles and seems to work, but I'm sure I missed something?
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Fix a bug in the storage of the linear block roots array in the freezer DB. Previously this array was always written as part of state storage (or block backfill). With state pruning enabled by #4610, these states were no longer being written and as a result neither were the block roots.
The impact is quite low, we would just log an error when trying to forwards-iterate the block roots, which for validating nodes only happens when they try to look up blocks for peers:
> Aug 25 03:42:36.980 ERRO Missing chunk in forwards iterator chunk index: 49726, service: freezer_db
Any node checkpoint synced off `unstable` is affected and has a corrupt database. If you see the log above, you need to re-sync with the fix. Nodes that haven't checkpoint synced recently should _not_ be corrupted, even if they ran the buggy version.
## Proposed Changes
- Use a `ChunkWriter` to write the block roots when states are not being stored.
- Tweak the usage of `get_latest_restore_point` so that it doesn't return a nonsense value when state pruning is enabled.
- Tweak the guarantee on the block roots array so that block roots are assumed available up to the split slot (exclusive). This is a bit nicer than relying on anything to do with the latest restore point, which is a nonsensical concept when there aren't any restore points.
## Additional Info
I'm looking forward to deleting the chunked vector code for good when we merge tree-states 😁
## Issue Addressed
NA
## Proposed Changes
Add the Holesky network config as per 36e4ff2d51/custom_config_data.
Since the genesis state is ~190MB, I've opted to *not* include it in the binary and instead download it at runtime (see #4564 for context). To download this file we have:
- A hard-coded URL for a SigP-hosted S3 bucket with the Holesky genesis state. Assuming this download works correctly, users will be none the wiser that the state wasn't included in the binary (apart from some additional logs)
- If the user provides a `--checkpoint-sync-url` flag, then LH will download the genesis state from that server rather than our S3 bucket.
- If the user provides a `--genesis-state-url` flag, then LH will download the genesis state from that server regardless of the S3 bucket or `--checkpoint-sync-url` flag.
- Whenever a genesis state is downloaded it is checked against a checksum baked into the binary.
- A genesis state will never be downloaded if it's already included in the binary.
- There is a `--genesis-state-url-timeout` flag to tweak the timeout for downloading the genesis state file.
## Log Output
Example of log output when a state is downloaded:
```bash
Aug 23 05:40:13.424 INFO Logging to file path: "/Users/paul/.lighthouse/holesky/beacon/logs/beacon.log"
Aug 23 05:40:13.425 INFO Lighthouse started version: Lighthouse/v4.3.0-bd9931f+
Aug 23 05:40:13.425 INFO Configured for network name: holesky
Aug 23 05:40:13.426 INFO Data directory initialised datadir: /Users/paul/.lighthouse/holesky
Aug 23 05:40:13.427 INFO Deposit contract address: 0x4242424242424242424242424242424242424242, deploy_block: 0
Aug 23 05:40:13.427 INFO Downloading genesis state info: this may take some time on testnets with large validator counts, timeout: 60s, server: https://sigp-public-genesis-states.s3.ap-southeast-2.amazonaws.com/
Aug 23 05:40:29.895 INFO Starting from known genesis state service: beacon
```
Example of log output when there are no URLs specified:
```
Aug 23 06:29:51.645 INFO Logging to file path: "/Users/paul/.lighthouse/goerli/beacon/logs/beacon.log"
Aug 23 06:29:51.646 INFO Lighthouse started version: Lighthouse/v4.3.0-666a39c+
Aug 23 06:29:51.646 INFO Configured for network name: goerli
Aug 23 06:29:51.647 INFO Data directory initialised datadir: /Users/paul/.lighthouse/goerli
Aug 23 06:29:51.647 INFO Deposit contract address: 0xff50ed3d0ec03ac01d4c79aad74928bff48a7b2b, deploy_block: 4367322
The genesis state is not present in the binary and there are no known download URLs. Please use --checkpoint-sync-url or --genesis-state-url.
```
## Additional Info
I tested the `--genesis-state-url` flag with all 9 Goerli checkpoint sync servers on https://eth-clients.github.io/checkpoint-sync-endpoints/ and they all worked 🎉
My IDE eagerly formatted some `Cargo.toml`. I've disabled it but I don't see the value in spending time reverting the changes that are already there.
I also added the `GenesisStateBytes` enum to avoid an unnecessary clone on the genesis state bytes baked into the binary. This is not a huge deal on Mainnet, but will become more relevant when testing with big genesis states.
When we do a fresh checkpoint sync we're downloading the genesis state to check the `genesis_validators_root` against the finalised state we receive. This is not *entirely* pointless, since we verify the checksum when we download the genesis state so we are actually guaranteeing that the finalised state is on the same network. There might be a smarter/less-download-y way to go about this, but I've run out of cycles to figure that out. Perhaps we can grab it in the next release?
## Issue Addressed
`web3signer_tests` can sometimes timeout.
## Proposed Changes
Increase the `web3signer_tests` timeout from 20s to 30s
## Additional Info
Previously I believed the consistent CI failures were due to this, but it ended up being something different. See below:
---
The timing of this makes it very likely it is related to the [latest release of `web3-signer`](https://github.com/Consensys/web3signer/releases/tag/23.8.1).
I now believe this is due to an out of date Java runtime on our runners. A newer version of Java became a requirement with the new `web3-signer` release.
However, I was getting timeouts locally, which implies that the margin before timeout is quite small at 20s so bumping it up to 30s could be a good idea regardless.
## Issue Addressed
N/A
## Proposed Changes
Remove the `hidden(true)` modifier on the `--gui` flag so it shows up when running `lighthouse bn --help`
## Additional Info
We need to include this now that Siren has had its first stable release.
## Issue Addressed
#4654
## Proposed Changes
Only log error if we're unable to read slot clock after genesis.
I thought about simply down grading the `error` to a `warn`, but feel like it's still unnecessary noise before genesis, and it would be good to retain error log if we're pass genesis. But I'd be ok with just downgrading the log level, too.
## Issue Addressed
Closes#4473 (take 3)
## Proposed Changes
- Send a 202 status code by default for duplicate blocks, instead of 400. This conveys to the caller that the block was published, but makes no guarantees about its validity. Block relays can count this as a success or a failure as they wish.
- For users wanting finer-grained control over which status is returned for duplicates, a flag `--http-duplicate-block-status` can be used to adjust the behaviour. A 400 status can be supplied to restore the old (spec-compliant) behaviour, or a 200 status can be used to silence VCs that warn loudly for non-200 codes (e.g. Lighthouse prior to v4.4.0).
- Update the Lighthouse VC to gracefully handle success codes other than 200. The info message isn't the nicest thing to read, but it covers all bases and isn't a nasty `ERRO`/`CRIT` that will wake anyone up.
## Additional Info
I'm planning to raise a PR to `beacon-APIs` to specify that clients may return 202 for duplicate blocks. Really it would be nice to use some 2xx code that _isn't_ the same as the code for "published but invalid". I think unfortunately there aren't any suitable codes, and maybe the best fit is `409 CONFLICT`. Given that we need to fix this promptly for our release, I think using the 202 code temporarily with configuration strikes a nice compromise.
## Issue Addressed
updates underlying dependencies and removes the ignored `RUSTSEC`'s for `cargo audit`.
Also switches `procinfo` to `procfs` on `eth2` to remove the `nom` warning, `procinfo` is unmaintained see [here](https://github.com/danburkert/procinfo-rs/issues/46).
## Issue Addressed
Temporary ignore for #4651. We are unaffected, and upstream will be patched in a few days.
## Proposed Changes
- Ignore cargo audit failures (ublocks CI)
- Use `--locked` when building with `cross`. We use `--locked` for regular builds, and I think excluding it from `cross` was just an oversight.
I think for consistent builds it makes sense to use `--locked` while building. This is particularly relevant for release binaries, which otherwise will just use a random selection of dependencies that exist on build day (near impossible to recreate if we had to).
## Issue Addressed
Fixes a bug in the handling of `--beacon-process-max-workers` which caused it to have no effect.
## Proposed Changes
For this PR I channeled @ethDreamer and saw deep into the faulty CLI config -- this bug is almost identical to the one Mark found and fixed in #4622.
`parent_finalized.epoch + 1 > block_epoch` will never be `true` since as the comment says:
```
A block in epoch `N` cannot contain attestations which would finalize an epoch higher than `N - 1`.
```
## Issue Addressed
Closes#3210Closes#3211
## Proposed Changes
- Checkpoint sync from the latest finalized state regardless of its alignment.
- Add the `block_root` to the database's split point. This is _only_ added to the in-memory split in order to avoid a schema migration. See `load_split`.
- Add a new method to the DB called `get_advanced_state`, which looks up a state _by block root_, with a `state_root` as fallback. Using this method prevents accidental accesses of the split's unadvanced state, which does not exist in the hot DB and is not guaranteed to exist in the freezer DB at all. Previously Lighthouse would look up this state _from the freezer DB_, even if it was required for block/attestation processing, which was suboptimal.
- Replace several state look-ups in block and attestation processing with `get_advanced_state` so that they can't hit the split block's unadvanced state.
- Do not store any states in the freezer database by default. All states will be deleted upon being evicted from the hot database unless `--reconstruct-historic-states` is set. The anchor info which was previously used for checkpoint sync is used to implement this, including when syncing from genesis.
## Additional Info
Needs further testing. I want to stress-test the pruned database under Hydra.
The `get_advanced_state` method is intended to become more relevant over time: `tree-states` includes an identically named method that returns advanced states from its in-memory cache.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
This PR updates `blst` to 0.3.11, which gives us _runtime detection of CPU features_ 🎉
Although [performance benchmarks](https://gist.github.com/michaelsproul/f759fa28dfa4003962507db34b439d6c) don't show a substantial detriment to running the `portable` build vs `modern`, in order to take things slowly I propose the following roll-out strategy:
- Keep both `modern` and `portable` builds for releases/Docker images.
- Run the `portable` build on half of SigP's infrastructure to monitor for performance deficits.
- Listen out for user issues with the `portable` builds (e.g. SIGILLs from misdetected hardware).
- Make the `portable` build the default and remove the `modern` build from our release binaries & Docker images.
It seems `post_validator_duties_sync` is the only api which doesn't have its own metric in `duties_service`, this PR adds `metrics::VALIDATOR_DUTIES_SYNC_HTTP_POST` for completeness.
Since `tolerant_current_epoch` is expected to be either `current_epoch` or `current_epoch+1`, we can eliminate a case here.
And added a comment about `compute_historic_attester_duties` , since `RelativeEpoch::from_epoch` will only allow `request_epoch == current_epoch-1` when `request_epoch < current_epoch`.
## Issue Addressed
Closes#4245
## Proposed Changes
- If an SSE channel fills up, send a comment instead of terminating the stream.
- Add a CLI flag for scaling up the SSE buffer: `--http-sse-capacity-multiplier N`.
## Additional Info
~~Blocked on #4462. I haven't rebased on that PR yet for initial testing, because it still needs some more work to handle long-running HTTP threads.~~
- [x] Add CLI flag tests.
## Issue Addressed
The feature flag used to control this feature is `disable_backfill` instead of `disable-backfill`.
kudos to @michaelsproul for discovering this bug!
## Issue Addressed
Closes#3404 (mostly)
## Proposed Changes
- Remove all uses of Warp's `and_then` (which backtracks) in favour of `then` (which doesn't).
- Bump the priority of the `POST` method for `v2/blocks` to `P0`. Publishing a block needs to happen quickly.
- Run the new SSZ POST endpoints on the beacon processor. I think this was missed in between merging #4462 and #4504/#4479.
- Fix a minor issue in the validator registrations endpoint whereby an error from spawning the task on the beacon processor would be dropped.
## Additional Info
I've tested this manually and can confirm that we no longer get the dreaded `Unsupported endpoint version` errors for queries like:
```
$ curl -X POST -H "Content-Type: application/json" --data @block.json "http://localhost:5052/eth/v2/beacon/blocks" | jq
{
"code": 400,
"message": "BAD_REQUEST: WeakSubjectivityConflict",
"stacktraces": []
}
```
```
$ curl -X POST -H "Content-Type: application/octet-stream" --data @block.json "http://localhost:5052/eth/v2/beacon/blocks" | jq
{
"code": 400,
"message": "BAD_REQUEST: invalid SSZ: OffsetOutOfBounds(572530811)",
"stacktraces": []
}
```
```
$ curl "http://localhost:5052/eth/v2/validator/blocks/7067595"
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
However, I can still trigger it by leaving off the `Content-Type`. We can re-test this aspect with #4575.
## Issue Addressed
#4538
## Proposed Changes
add newtype wrapper around DialError that extracts error messages and logs them in a more readable format
## Additional Info
I was able to test Transport Dial Errors in the situation where a libp2p instance attempts to ping a nonexistent peer. That error message should look something like
`A transport level error has ocurred: Connection refused (os error 61)`
AgeManning mentioned we should try fetching only the most inner error (in situations where theres a nested error). I took a stab at implementing that
For non transport DialErrors, I wrote out the error messages explicitly (as per the docs). Could potentially clean things up here if thats not necessary
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
Rather than spawning new tasks on the tokio executor to process each HTTP API request, send the tasks to the `BeaconProcessor`. This achieves:
1. Places a bound on how many concurrent requests are being served (i.e., how many we are actually trying to compute at one time).
1. Places a bound on how many requests can be awaiting a response at one time (i.e., starts dropping requests when we have too many queued).
1. Allows the BN prioritise HTTP requests with respect to messages coming from the P2P network (i.e., proiritise importing gossip blocks rather than serving API requests).
Presently there are two levels of priorities:
- `Priority::P0`
- The beacon processor will prioritise these above everything other than importing new blocks.
- Roughly all validator-sensitive endpoints.
- `Priority::P1`
- The beacon processor will prioritise practically all other P2P messages over these, except for historical backfill things.
- Everything that's not `Priority::P0`
The `--http-enable-beacon-processor false` flag can be supplied to revert back to the old behaviour of spawning new `tokio` tasks for each request:
```
--http-enable-beacon-processor <BOOLEAN>
The beacon processor is a scheduler which provides quality-of-service and DoS protection. When set to
"true", HTTP API requests will queued and scheduled alongside other tasks. When set to "false", HTTP API
responses will be executed immediately. [default: true]
```
## New CLI Flags
I added some other new CLI flags:
```
--beacon-processor-aggregate-batch-size <INTEGER>
Specifies the number of gossip aggregate attestations in a signature verification batch. Higher values may
reduce CPU usage in a healthy network while lower values may increase CPU usage in an unhealthy or hostile
network. [default: 64]
--beacon-processor-attestation-batch-size <INTEGER>
Specifies the number of gossip attestations in a signature verification batch. Higher values may reduce CPU
usage in a healthy network whilst lower values may increase CPU usage in an unhealthy or hostile network.
[default: 64]
--beacon-processor-max-workers <INTEGER>
Specifies the maximum concurrent tasks for the task scheduler. Increasing this value may increase resource
consumption. Reducing the value may result in decreased resource usage and diminished performance. The
default value is the number of logical CPU cores on the host.
--beacon-processor-reprocess-queue-len <INTEGER>
Specifies the length of the queue for messages requiring delayed processing. Higher values may prevent
messages from being dropped while lower values may help protect the node from becoming overwhelmed.
[default: 12288]
```
I needed to add the max-workers flag since the "simulator" flavor tests started failing with HTTP timeouts on the test assertions. I believe they were failing because the Github runners only have 2 cores and there just weren't enough workers available to process our requests in time. I added the other flags since they seem fun to fiddle with.
## Additional Info
I bumped the timeouts on the "simulator" flavor test from 4s to 8s. The prioritisation of consensus messages seems to be causing slower responses, I guess this is what we signed up for 🤷
The `validator/register` validator has some special handling because the relays have a bad habit of timing out on these calls. It seems like a waste of a `BeaconProcessor` worker to just wait for the builder API HTTP response, so we spawn a new `tokio` task to wait for a builder response.
I've added an optimisation for the `GET beacon/states/{state_id}/validators/{validator_id}` endpoint in [efbabe3](efbabe3252). That's the endpoint the VC uses to resolve pubkeys to validator indices, and it's the endpoint that was causing us grief. Perhaps I should move that into a new PR, not sure.
## Issue Addressed
Addresses #2557
## Proposed Changes
Adds the `lighthouse validator-manager` command, which provides:
- `lighthouse validator-manager create`
- Creates a `validators.json` file and a `deposits.json` (same format as https://github.com/ethereum/staking-deposit-cli)
- `lighthouse validator-manager import`
- Imports validators from a `validators.json` file to the VC via the HTTP API.
- `lighthouse validator-manager move`
- Moves validators from one VC to the other, utilizing only the VC API.
## Additional Info
In 98bcb947c I've reduced some VC `ERRO` and `CRIT` warnings to `WARN` or `DEBG` for the case where a pubkey is missing from the validator store. These were being triggered when we removed a validator but still had it in caches. It seems to me that `UnknownPubkey` will only happen in the case where we've removed a validator, so downgrading the logs is prudent. All the logs are `DEBG` apart from attestations and blocks which are `WARN`. I thought having *some* logging about this condition might help us down the track.
In 856cd7e37d I've made the VC delete the corresponding password file when it's deleting a keystore. This seemed like nice hygiene. Notably, it'll only delete that password file after it scans the validator definitions and finds that no other validator is also using that password file.
## Issue Addressed
NA
## Proposed Changes
We've been seeing a lot of [CI failures](https://github.com/sigp/lighthouse/actions/runs/5781296217/job/15666209142) with errors like this:
```
---- extra_interchange_tests::export_same_key_twice stdout ----
thread 'extra_interchange_tests::export_same_key_twice' panicked at 'called `Result::unwrap()` on an `Err` value: SQLError("Unable to open database: Error(None)")', validator_client/slashing_protection/src/extra_interchange_tests.rs:48:67
```
I'm assuming they're timeouts. I noticed that tests have a 0.1s timeout. Perhaps this just doesn't cut it when our new runners are overloaded.
## Additional Info
NA
**Motivation**
As clarified [on discord](https://discord.com/channels/605577013327167508/605577013331361793/1121246688183603240), sync committee contributions are not delayed if DP is enabled.
**Description**
This PR updates doppelganger note about sync committee contributions. Based on the current docs, a user might assume that DP is not working as expected.
## Issue Addressed
Addresses [#4401](https://github.com/sigp/lighthouse/issues/4401)
## Proposed Changes
Shift some constants into ```ChainSpec``` and remove the constant values from code space.
## Additional Info
I mostly used ```MainnetEthSpec::default_spec()``` for getting ```ChainSpec```. I wonder Did I make a mistake about that.
Co-authored-by: armaganyildirak <armaganyildirak@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Upgrade libp2p to v0.52
## Proposed Changes
- **Workflows**: remove installation of `protoc`
- **Book**: remove installation of `protoc`
- **`Dockerfile`s and `cross`**: remove custom base `Dockerfile` for cross since it's no longer needed. Remove `protoc` from remaining `Dockerfiles`s
- **Upgrade `discv5` to `v0.3.1`:** we have some cool stuff in there: no longer needs `protoc` and faster ip updates on cold start
- **Upgrade `prometheus` to `0.21.0`**, now it no longer needs encoding checks
- **things that look like refactors:** bunch of api types were renamed and need to be accessed in a different (clearer) way
- **Lighthouse network**
- connection limits is now a behaviour
- banned peers no longer exist on the swarm level, but at the behaviour level
- `connection_event_buffer_size` now is handled per connection with a buffer size of 4
- `mplex` is deprecated and was removed
- rpc handler now logs the peer to which it belongs
## Additional Info
Tried to keep as much behaviour unchanged as possible. However, there is a great deal of improvements we can do _after_ this upgrade:
- Smart connection limits: Connection limits have been checked only based on numbers, we can now use information about the incoming peer to decide if we want it
- More powerful peer management: Dial attempts from other behaviours can be rejected early
- Incoming connections can be rejected early
- Banning can be returned exclusively to the peer management: We should not get connections to banned peers anymore making use of this
- TCP Nat updates: We might be able to take advantage of confirmed external addresses to check out tcp ports/ips
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Akihito Nakano <sora.akatsuki@gmail.com>
