* run race tests in CICD
* set HOME env for .ethereum mkdir permission denied
* use same homeDir method as other places in code
* unused variable in test removed
* do NOT run race tests
* add statediffing test to Jenkinsfile
* run race tests in CICD
* set HOME env for .ethereum mkdir permission denied
* use same homeDir method as other places in code
* unused variable in test removed
* do NOT run race tests
update tests, helper methods, etc for changed interfaces
linted and some tests updated... statediff tests failing on filesystem call locally
undo changes to go.mod from rebase
changed ref and repo to try old stack-orch with miner.etherbase arg
turn off new tests yml for old tests with hack for old stack-orchestrator
The EmptyRootHash and EmptyCodeHash are defined everywhere in the codebase, this PR replaces all of them with unified one defined in core/types package, and also defines constants for TxRoot, WithdrawalsRoot and UncleRoot
The change fixes unmarshaling of JSON null results into json.RawMessage.
---------
Co-authored-by: Jason Yuan <jason.yuan@curvegrid.com>
Co-authored-by: Jason Yuan <jason.yuan869@gmail.com>
This PR contains a small portion of the full pbss PR, namely
Remove the tracer from trie (and comitter), and instead using an accessList.
Related changes to the Nodeset.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
The method `GetPayloadBodiesByRangeV1` now returns "-38004: Too large request" error if the requested range is too large, according to spec
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR is a (superior) alternative to https://github.com/ethereum/go-ethereum/pull/26708, it handles deprecation, primarily two specific cases.
`rand.Seed` is typically used in two ways
- `rand.Seed(time.Now().UnixNano())` -- we seed it, just to be sure to get some random, and not always get the same thing on every run. This is not needed, with global seeding, so those are just removed.
- `rand.Seed(1)` this is typically done to ensure we have a stable test. If we rely on this, we need to fix up the tests to use a deterministic prng-source. A few occurrences like this has been replaced with a proper custom source.
`rand.Read` has been replaced by `crypto/rand`.`Read` in this PR.
This PR relaxes the block body ingress handling a bit: if block body withdrawals are missing (but expected to be empty), the body withdrawals are set to 'empty list' before being passed to upper layers.
This fixes an issue where a block passed from EthereumJS to geth was deemed invalid.
Our discovery crawler spits out a huge amount of logs, most of which is pretty non-interesting. This change moves the very verbose output to Debug, and adds a 8-second status log message giving the general idea about what's going on.
Logs stored on disk have minimal information. Contextual information such as block
number, index of log in block, index of transaction in block are filled in upon request.
We can fill in all these fields only having the block header and list of receipts.
But determining the transaction hash of a log requires the block body.
The goal of this PR is postponing this retrieval until we are sure we the transaction hash.
It happens often that the header bloom filter signals there might be matches in a block,
but after actually checking them reveals the logs do not match. We want to avoid fetching
the body in this case.
Note that this changes the semantics of Backend.GetLogs. Downstream callers of
GetLogs now assume log context fields have not been derived, and need to call
DeriveFields on the logs if necessary.
This is a breaking change in the tracing hooks API as well as semantics of the callTracer:
- CaptureEnter hook provided a nil value argument in case of DELEGATECALL. However to stay consistent with how delegate calls behave in EVM this hook is changed to pass in the value of the parent call.
- callTracer will return parent call's value for DELEGATECALL frames.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* common, core, eth, les, trie: make prque generic
* les/vflux/server: fixed issues in priorityPool
* common, core, eth, les, trie: make priority also generic in prque
* les/flowcontrol: add test case for priority accumulator overflow
* les/flowcontrol: avoid priority value overflow
* common/prque: use int priority in some tests
No need to convert to int64 when we can just change the type used by the
queue.
* common/prque: remove comment about int64 range
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This change ports some changes from the main PBSS PR:
- get rid of callback function in `trie.Database.Commit` which is not required anymore
- rework the `nodeResolver` in `trie.Iterator` to make it compatible with multiple state scheme
- some other shallow changes in tests and typo-fixes
* log: allow tabs in log messages
This fixes a regression where panic reports in RPC handlers were quoted
because they contain tab characters.
* Update format.go
According to the spec the payloadID needs to be random or dependent on all arguments, to prevent two payloads from clashing. This change adds withdrawals into the payload derivation.
---------
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR moves core/beacon to beacon/engine so that beacon-chain related code has its own top level package which also can house the the beacon lightclient-code.
This PR moves some trie-related db accessor methods to a different file, and also removes the schema type. Instead of the schema type, a string is used to distinguish between hashbased/pathbased db accessors.
This also moves some code from trie package to rawdb package.
This PR is intended to be a no-functionality-change prep PR for #25963 .
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change fixes a minor flaw in the check for ipc endpoint length. The max_path_size is the max path that an ipc endpoint can have, which is 208. However, that size concerns the null-terminated pathname, so we need to account for an extra null-character too.
This change improves reusability of the EVM struct. Two methods are added:
- SetBlockContext(...)
- SetTracer(...)
Other attributes like the TransactionContext and the StateDB can already be updated.
BlockContext and Tracer are partially not updateable right now. This change fixes it and
opens the potential to reuse an EVM struct in more ways.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth: cmd: deprecate personal namespace
* eth: cmd: move deprecation to node
* node: disable toml of enablepersonal
* node: disable personal on ipc as well
* Update node/node.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
* console: error -> warn
* node: less roulette
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Adds blocktest subcommand to the evm command, which is very similar to statetest, but instead of loading a StateTest static test it loads a BlockchainTest from a json file and runs it.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
This change removes the Infura rinkeby bootnode as well as two deprecated ropsten bootnodes.
Co-authored-by: Nicola Cocchiaro <ncocchiaro@users.noreply.github.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes a regression where the flag did not accept values without
the 0x prefix anymore. What's worse, if an invalid value was passed,
the client would just log an INFO level message and continue.
This change introduces a breaking change to miner.etherbase is configured.
Previously, users did not need to explicitly set the etherbase address via flag, since 'first' local account was used as etherbase automatically. This change removes the "default first account" feature.
In Proof-of-stake world, the fee recipient address is provided by CL, and not configured in Geth any more - meaning that miner.etherbase is mostly for legacy networks(pow, clique networks etc).
Fixes#26505 where the console crashed when a property getter
raised an exception during autocompletion. I also noticed while fixing this
issue that autocomplete wasn't working for objects/fields with numbers in
them (most importantly web3.<tab><tab>) which is also now fixed.
This PR does a few things.
It fixes a shutdown-order flaw in the chainfreezer. Previously, the chain-freezer would shutdown the freezer backend first, and then signal for the loop to exit. This can lead to a scenario where the freezer tries to fsync closed files, which is an error-conditon that could lead to exit via log.Crit.
It also makes the printout more detailed when truncating 'dangling' items, by showing the exact number instead of approximate MB.
This PR also adds calls to fsync files before closing them, and also makes the `db inspect` command slightly more robust.
* internal/flags: use filepath.Clean instead of path.Clean
* internal/flags: fix windows pipe issue
* internal/flags: modify test for windows
* internal/flags: use backticks, fix test
This PR fixes an issue which might result in data lost in freezer.
Whenever mutation happens in freezer, all data will be written into head data file
and it will be rotated with a new one in case the size of file reaches the threshold.
Theoretically, the rotated old data file should be fsync'd to prevent data loss.
In freezer.Sync function, we only fsync: (1) index file (2) meta file and (3) head
data file. So this PR forcibly fsync the head data file if mutation happens in the
boundary of data file.
In legacy (pre-merge) sync mode, headers were contiguously downloaded from the network and when no more headers were available, we checked every few seconds whether there are 64 new blocks to move the pivot.
In beacon (post-merge) sync mode, we don't need to check for new skeleton headers non stop, since those re delivered one by one by the engine API. The missing code snippet from the header fetcher was to actually look at the latest head and move the pivot if it was more than 2*64-8 away. This PR adds the missing movement logic.
This makes non-JS tracers execute all block txs on a single goroutine.
In the previous implementation, we used to prepare every tx pre-state
on one goroutine, and then run the transactions again with tracing enabled.
Native tracers are usually faster, so it is faster overall to use their output as
the pre-state for tracing the next transaction.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR removes the notion of fakeStorage from the state objects, and instead, for any state modifications that are needed, it simply makes the changes.
* p2p/discover: add more packet information in logs
This adds more fields to discv5 packet logs. These can be useful when
debugging multi-packet interactions.
The FINDNODE message also gets an additional field, OpID for debugging
purposes. This field is not encoded onto the wire.
I'm also removing topic system related message types in this change.
These will come back in the future, where support for them will be
guarded by a config flag.
* p2p/discover/v5wire: rename 'Total' to 'RespCount'
The new name captures the meaning of this field better.
Alarm is a timer utility that simplifies code where a timer needs to be rescheduled over
and over. Doing this can be tricky with time.Timer or time.AfterFunc because the channel
requires draining in some cases.
Alarm is optimized for use cases where items are tracked in a heap according to their expiry
time, and a goroutine with a for/select loop wants to be woken up whenever the next item expires.
In this application, the timer needs to be rescheduled when an item is added or removed
from the heap. Using a timer naively, these updates will always require synchronization
with the global runtime timer datastructure to update the timer using Reset. Alarm avoids
this by tracking the next expiry time and only modifies the timer if it would need to fire earlier
than already scheduled.
As an example use, I have converted p2p.dialScheduler to use Alarm instead of AfterFunc.
This changes moves the tracking of "deleted in this block" out from snap-only domain, so that it happens regardless of whether the execution is snapshot-backed or trie-backed.
This changes the StorageTrie method to return an error when the trie
is not available. It used to return an 'empty trie' in this case, but that's
not possible anymore under PBSS.
This PR builds on #26299, but also updates the tests to the most recent version, which includes tests regarding TheMerge.
This change adds checks to the beacon consensus engine, making it more strict in validating the pre- and post-headers, and not relying on the caller to have already correctly sanitized the headers/blocks.
This PR implements resettable freezer by adding a ResettableFreezer wrapper.
The resettable freezer wraps the original freezer in a way that makes it possible to ensure atomic resets. Implementation wise, it relies on the os.Rename and os.RemoveAll to atomically delete the original freezer data and re-create a new one from scratch.
This PR fixes an error in trie commit. If the trie.root is nil, it can be two possible scenarios:
- The trie was empty, and no change happens
- The trie was non-empty and all nodes are dropped
For the latter one, we should collect the deletions and apply them into database(e.g. in PBSS).
This ensures that RPC method handlers will react to a timeout or
cancelled request soon after the event occurs.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR adds a check that the safetxhash that we sign corresponds to the one that is expected by the input. If it differs, it tries again with the configured chainid.
A comment suggests that contract creation happens if the recipient of a call is 0x00..00 ("zero address") but in fact the sender must be nil. The zero address is a regular valid address that is commonly used as a "burn" address.
Currently calling `debug_TraceTransaction` with a transaction hash that doesn't exist returns a confusing error: `genesis is not traceable`. This PR changes the behaviour to instead return an error message saying `transaction not found`
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR adds a new type event.FeedOf[T], which is like event.Feed but parameterized
over the channel element type. Performance is unchanged, and it still uses reflect. But
unlike Feed, the generic version doesn't need to type-check interface{} arguments.
All panic cases are gone from the API.
While investigating another issue, I found that all callers of collectLogs have the
complete block available. rawdb.ReadReceipts loads the block from the database,
so it is better to use ReadRawReceipts here, and derive the receipt information using
the block which is already in memory.
This PR makes it possible to modify the flush interval time via RPC. On one extreme, `0s`, it would act as an archive node. If set to `1h`, means that after one hour of effective block processing time, the trie would be flushed. If one block takes 200ms, this means that a flush would occur every `5*3600=18000` blocks -- however, if the memory size of the cached states grows too large, it will flush sooner.
Essentially, this makes it possible to configure the node to be more or less "archive:ish", and without restarting the node while reconfiguring it.
--syncTarget is a feature for development purpose in post-merge world. Previously
it's added into eth.Config. But it turns out that's a stupid idea.
- syncTarget is a block object, which is hard to be put in config file(large)
- syncTarget is just a dev feature, doesn't make too much sense to add it in config file
So I remove it from the eth config object. And it also fixes the #26328
This improves readability of function 'push'.
sort.Search(N, ...) will at most return N when no match, so ix should be compared
with N. The previous version would compare ix with N+1 in case an additional item
was appended. No bug resulted from this comparison, but it's not easy to understand
why.
Co-authored-by: Felix Lange <fjl@twurst.com>
The gcproc field tracks the amount of time spent processing blocks,
and is used to trigger a state flush to disk when a certain threshold is
reached. After the merge, single block insertion by CL is the most
common source of block processing time, but this time was not added
into gcproc.
Here we add special handling for sending an error response when the write timeout of the
HTTP server is just about to expire. This is surprisingly difficult to get right, since is
must be ensured that all output is fully flushed in time, which needs support from
multiple levels of the RPC handler stack:
The timeout response can't use chunked transfer-encoding because there is no way to write
the final terminating chunk. net/http writes it when the topmost handler returns, but the
timeout will already be over by the time that happens. We decided to disable chunked
encoding by setting content-length explicitly.
Gzip compression must also be disabled for timeout responses because we don't know the
true content-length before compressing all output, i.e. compression would reintroduce
chunked transfer-encoding.
The new flag allows configuring an explicit endpoint which is to be
announced in the DHT. This feature was originally developed for the
discv5 wormhole experiment (#25798), but it's useful in other contexts
as well.
This removes the 'time' field from logs, as well as from the tracer interface. This change makes the trace output deterministic. If a tracer needs the time they can measure it themselves. No need for evm to do this.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This changes the Pop method to assign the zero value before
reducing slice size. Doing so ensures the backing array does not
reference removed item values.
This PR drops the legacy receipt types, the freezer-migrate command and the startup check. The previous attempt #22852 at this failed because there were users who still had legacy receipts in their db, so it had to be reverted #23247. Since then we added a command to migrate legacy dbs #24028.
As of the last hardforks all users either must have done the migration, or used the --ignore-legacy-receipts flag which will stop working now.
This PR introduces a node scheme abstraction. The interface is only implemented by `hashScheme` at the moment, but will be extended by `pathScheme` very soon.
Apart from that, a few changes are also included which is worth mentioning:
- port the changes in the stacktrie, tracking the path prefix of nodes during commit
- use ethdb.Database for constructing trie.Database. This is not necessary right now, but it is required for path-based used to open reverse diff freezer
This PR should makes it easier to sign EIP-712 typed data via the accounts.Wallet API, by using the mimetype for typed data.
Co-authored-by: nasdf <keenan.nemetz@gmail.com>
While investigating #22374, I noticed that the Sync operation of the
freezer does not take the table lock. It also doesn't call sync for all files
if there is an error with one of them. I doubt this will fix anything, but
didn't want to drop the fix on the floor either.
This removes an RPC test which takes > 90s to execute, and updates the
internal/guide tests to use lighter scrypt parameters.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a way to specify HTTP headers per request.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
rpc: fix connection tracking in Server
When upgrading to mapset/v2 with generics, the set element type used in
rpc.Server had to be changed to *ServerCodec because ServerCodec is not
'comparable'. While the distinction is technically correct, we know all
possible ServerCodec types, and all of them are comparable. So just use
a map instead.
It seems there is no fully typed library implementation of an LRU cache.
So I wrote one. Method names are the same as github.com/hashicorp/golang-lru,
and the new type can be used as a drop-in replacement.
Two reasons to do this:
- It's much easier to understand what a cache is for when the types are right there.
- Performance: the new implementation is slightly faster and performs zero memory
allocations in Add when the cache is at capacity. Overall, memory usage of the cache
is much reduced because keys are values are no longer wrapped in interface.
This PR changes the pending tx subscription to return RPCTransaction types instead of normal Transaction objects. This will fix the inconsistencies with other tx returning API methods (i.e. getTransactionByHash), and also fill in the sender value for the tx.
co-authored by @s1na
This fixes a problem in the SizeConstrainedLRU. The SCLRU uses an underlying simple lru which is not thread safe.
During the Get operation, the recentness of the accessed item is updated, so it is not a pure read-operation. Therefore, the mutex we need is a full mutex, not RLock.
This PR changes the mutex to be a regular Mutex, instead of RWMutex, so a reviewer can at a glance see that all affected locations are fixed.
This changes how we read performance metrics from the Go runtime. Instead
of using runtime.ReadMemStats, we now rely on the API provided by package
runtime/metrics.
runtime/metrics provides more accurate information. For example, the new
interface has better reporting of memory use. In my testing, the reported
value of held memory more accurately reflects the usage reported by the OS.
The semantics of metrics system/memory/allocs and system/memory/frees have
changed to report amounts in bytes. ReadMemStats only reported the count of
allocations in number-of-objects. This is imprecise: 'tiny objects' are not
counted because the runtime allocates them in batches; and certain
improvements in allocation behavior, such as struct size optimizations,
will be less visible when the number of allocs doesn't change.
Changing allocation reports to be in bytes makes it appear in graphs that
lots more is being allocated. I don't think that's a problem because this
metric is primarily interesting for geth developers.
The metric system/memory/pauses has been changed to report statistical
values from the histogram provided by the runtime. Its name in influxdb has
changed from geth.system/memory/pauses.meter to
geth.system/memory/pauses.histogram.
We also have a new histogram metric, system/cpu/schedlatency, reporting the
Go scheduler latency.
This adds an option to direct log output to a file. This feature has been
requested a lot. It's sometimes useful to have this available when running
geth in an environment that doesn't easily allow redirecting the output.
Notably, there is no support for log rotation with this change. The --log.file option
opens the file once on startup and then keeps writing to the file handle.
This can become an issue when external log rotation tools are involved, so it's
best not to use them with this option for now.
When the interpreter is configured to use extra-eips, this change makes it so that all the opcodes are deep-copied, to prevent accidental modification of the 'base' jumptable.
Closes: #26136
Co-authored-by: Martin Holst Swende <martin@swende.se>
PR #26082 added account listing to OnSignerStartup but did not consider the case where a user has a large number of accounts which would be annoying to display.
This PR updates showAccounts() so that if there are more than 20 accounts available the user sees the first 20 displayed in the console followed by: First 20 accounts listed (N more available).
Co-authored-by: Martin Holst Swende <martin@swende.se>
Many of the other types have a function to convert the type to a big.Int,
but Address was missing this function.
It is useful to be able to turn an Address into a big.Int when doing
EVM-like computations natively in Go. Sometimes a Solidity address
type is casted to a uint256 and having a Big method on the Address
type makes this easy.
Instead of using a limit of three nodes per message, we can pack more nodes
into each message based on ENR size. In my testing, this halves the number
of sent NODES messages, because ENR size is usually < 300 bytes.
This also adds RLP helper functions that compute the encoded size of
[]byte and string.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR now also includes a fix to the problem of mult-routines building blocks on the same input. This PR works as before with regards to stopping the work, but it just will not spin up a second routine if one is already building. So if the CL does N calls to FCU+buildblock, and N calls to GetPayload, only the first of each will do something, the other calls will be mostly no-ops.
This PR also adds printout of the payload id into the logs.
* apitypes: synchronize handling of types
* signer/core/apitypes: improve array check
* apitypes: add a test for big.Int -> int32
* signer/core/apitypes: Add a test for parsing addresses from [20]byte, []byte and string
* signer/core/apitypes: add some testcases
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR changes geth to read the eip1559 params from the chain config instead of the globals.
This way the parameters may be changed by forking the chain config code, without creating a large diff throughout the past and future usages of the parameters.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This commit adds support for two new commands to clef, making it possible to list accounts / wallets from the command-line-interface.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Noticed that lookupDistances for FINDNODE requests didn't consider 256 a valid
distance. This is actually part of the example in the comment above the
function, surprised that wasn't tested before.
In some cases, it is desirable to capture what is triggered by each trace, when using the `callTracer`. For example: call `USDT.transfer` will trigger a `Transfer(from, to, value)` event.
This PR adds the option to capture logs to the call tracer, by specifying `{"withLog": true}` in the tracerconfig.
Any logs belonging to failed/reverted call-scopes are removed from the output, to prevent interpretation mistakes.
Signed-off-by: Delweng <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Inner call reverts will now return the reason similar to the top-level call. Separately, if top-level call is of type CREATE and it fails, its `to` field will now be cleared to `0x00...00` instead of being set to the created address.
This PR adds a parameter to startup, --synctarget. The synctarget flag is a developer-flag, that can be useful in some scenarios as a replacement for a CL node. It defines a fixed block sync target:
geth --syncmode=full --synctarget=./block_15816882.hex_rlp
The --synctarget is only made available during syncmode=full
* eth/tracers: fix gasUsed in call tracer
* fix js tracers gasUsed
* fix legacy prestate tracer
* fix restGas in test
* drop intrinsicGas field from js tracers
Currently, in order to chain together sequential valid t8n transitions the caller must manually calculate the block base fee. This PR adds support for the necessary parent fee market data to calculate the base fee for the current transition.
Concretely, env is extended to accept the following:
parentBaseFee
parentGasUsed
parentGasLimit
Example usage can be found in ./cmd/evm/testdata/25.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR ports a few changes from PBSS:
- Fix the snapshot generator waiter in case the generation is not even initialized
- Refactor db inspector for ancient store
The prestate tracer did not report accounts that existed at a given address prior to a contract being created at that address.
Signed-off-by: Delweng <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR fixes a regression causing snapshots not to be generated in "geth --import" mode. It also fixes the geth export command to be truly readonly, and adds a new test for geth export.
In some cases, inner contract creation may not be successful, and an inner contract was not created. This PR fixes a crash that could occur when doing tracing in such situations.
This PR adds a way to subscribe to the _full_ pending transactions, as opposed to just being notified about hashes.
In use cases where client subscribes to newPendingTransactions and gets txhashes only to then request the actual transaction, the caller can now shortcut that flow and obtain the transactions directly.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR removes some optimistic tests -- a'la "do something,
wait a while, and hope it has trickled through and continue" -- and
instead uses some introspection to ensure that prerequisites are met.
This changes the node setup to ignore datadir files
static-nodes.json
trusted-nodes.json
When these files are present, it an error will be printed to the log.
This adds a
* core/vm, tests: optimized modexp + fuzzer
* common/math: modexp optimizations
* core/vm: special case base 1 in big modexp
* core/vm: disable fastexp
This changes the error message for mismatching chain ID to show
the given and expected value. Callers expecting this error must be
changed to use errors.Is.
* usbwallet support Ledger Nano S Plus
* accounts/usbwallet: add definitions + ref to ledger docs
Co-authored-by: Martin Holst Swende <martin@swende.se>
This update resolves an issue where StringSliceFlag would not be
rendered correctly in help output + mention that -H can be used multiple times
Co-authored-by: Martin Holst Swende <martin@swende.se>
Prior to this change, f.begin (and possibly end) stay negative, leading to strange results later in the code. With this change, filters using "safe" and "finalized" block produce results consistent w/ the overall behavior of this RPC method.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* ethclient/gethclient: improve time-sensitive flaky test
* eth/catalyst: fix (?) flaky test
* core: stop blockchains in tests after use
* core: fix dangling blockchain instances
* core: rm whitespace
* eth/gasprice, eth/tracers, consensus/clique: stop dangling blockchains in tests
* all: address review concerns
* core: goimports
* eth/catalyst: fix another time-sensitive test
* consensus/clique: add snapshot test run function
* core: rename stop() to stopWithoutSaving()
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR introduces a new mechanism in chain tracer for preventing creating too many trace states.
The workflow of chain tracer can be divided into several parts:
- state creator generates trace state in a thread
- state tracer retrieves the trace state and applies the tracing on top in another thread
- state collector gathers all result from state tracer and stream to users
It's basically a producer-consumer model here, while if we imagine that the state producer generates states too fast, then it will lead to accumulate lots of unused states in memory. Even worse, in path-based state scheme it will only keep the latest 128 states in memory, and the newly generated state will invalidate the oldest one by marking it as stale.
The solution for fixing it is to limit the speed of state generation. If there are over 128 states un-consumed in memory, then the creation will be paused until the states are be consumed properly.
Backwards compatibility warning: The result will from now on omit empty fields instead
of including a zero value (e.g. no more `balance: '0x'`).
The prestateTracer will now take an option `diffMode: bool`. In this mode
the tracer will output the pre state and post data for the modified parts of state.
Read-only accesses will be completely omitted. Creations (be it account or slot)
will be signified by omission in the `pre` list and inclusion in `post`. Whereas
deletion (be it account or slot) will be signified by inclusion in `pre` and omission
in `post` list.
Signed-off-by: Delweng <delweng@gmail.com>
This PR makes it so that the snap server responds to trie heal requests when possible, even if the snapshot does not exist. The idea being that it might prolong the lifetime of a state root, so we don't have to pivot quite as often.
This PR makes it possible to set custom headers, in particular for two scenarios:
- geth attach
- geth commands which can use --remotedb, e..g geth db inspect
The ability to use custom headers is typically useful for connecting to cloud-apis, e.g. providing an infura- or alchemy key, or for that matter access-keys for environments behind cloudflare.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR reworks tx indexer a bit. Compared to the original version, one scenario is no longer handled - upgrading from legacy geth without indexer support.
The tx indexer was introduced in 2020 and have been present through hardforks, so it can be assumed that all Geth nodes have tx indexer already. So we can simplify the tx indexer logic a bit:
- If the tail flag is not present, it means node is just initialized may or may not with an ancient store attached. In this case all blocks are regarded as unindexed
- If the tail flag is present, it means blocks below tail are unindexed, blocks above tail are indexed
This change also address some weird cornercases that could make the indexer not work after a crash.
This fixes a bug where contract code would be overridden to empty code ("0x")
when the Code field of OverrideAccount was left nil. The change also cleans up
the encoding of overrides to only send necessary fields, and improves documentation.
Fixes#25615
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
The call tracer and prestate tracer store data JSON-encoded in memory. In order to support alternative encodings (specifically RLP), it's better to keep data a native format during tracing. This PR does marshalling at the end, using gencodec.
OBS!
This PR changes the call tracer result slightly:
- Order of type and value fields are changed (should not matter).
- Output fields are completely omitted when they're empty (no more output: "0x"). Previously, this was only _sometimes_ omitted (e.g. when call ended in a non-revert error) and otherwise 0x when the output was actually empty.
Some tests define an 'expectException' error but the tests runner does not check for conditions where this test value is filled (error expected) but in which no error is returned by the test runner.
An example of this scenario is GeneralStateTests/stTransactionTest/HighGasPrice.json, which expects a 'TR_NoFunds' error, but the test runner does not return any error.
Signed-off-by: meows <b5c6@protonmail.com>
`geth dumpgenesis` currently does not respect the content of the data directory. Instead, it outputs the genesis block created by command-line flags. This PR fixes it to read the genesis from the database, if the database already exists.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth/tracers: pad memory slice on oob case
* eth/tracers/js: fix testfailure due to err msg capitalization
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR cleans up the configurations for pruner and snapshotter by passing a config struct.
And also, this PR disables the snapshot background generation if the chain is opened in "read-only" mode. The read-only mode is necessary in some cases. For example, we have a list of commands to open the etheruem node in "read-only" mode, like export-chain. In these cases, the snapshot background generation is non expected and should be banned explicitly.
The abigen exclusion pattern, previously on the form "path:type", now supports wildcards. Examples "*:type" to exclude a named type in all files, or "/path/to/foo.sol:*" all types in foo.sol.
This changes the CI build to store the git commit and date into package
internal/version instead of package main. Doing this essentially merges our
two ways of tracking the go-ethereum version into a single place, achieving
two objectives:
- Bad block reports, which use version.Info(), will now have the git commit
information even when geth is built in an environment such as
launchpad.net where git access is unavailable.
- For geth builds created by `go build ./cmd/geth` (i.e. not using `go run
build/ci.go install`), git information stored by the go tool is now used
in the p2p node name as well as in `geth version` and `geth
version-check`.
Sometimes we get stuck on db compaction, and the CL re-issues the "same" command to us multiple times. Each request get stuck on the same place, in the middle of the handler.
This changes makes it so we do not reprocess the same payload, but instead detects it early.
core/blockchain: downgrade tx indexing and unindexing logs from info to debug
If a user has a finite tx lookup limit, they will see an "unindexing" info level log each time a block is imported. This information might help a user understand that they are removing the index each block and some txs may not be retrievable by hash, but overall it is generally more of a nuisance than a benefit. This change downgrades the log to a debug log.
This shortens the chain config summary in bad block reports,
and adds go-ethereum version information as well.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change makes eth_getProof and eth_getStorageAt return an error when
the argument contains invalid hex in storage keys.
Co-authored-by: Felix Lange <fjl@twurst.com>
* cmd/geth: add a verkle subcommand
* fix copyright year
* remove unused command parameters
* check that the output file was successfully written to
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/geth: goimports fix
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
This PR makes the event-sending for deleted and new logs happen in batches, to prevent OOM situation due to large reorgs.
Co-authored-by: Felix Lange <fjl@twurst.com>
This changes the error code returned by the RPC server in certain situations:
- handler panic: code -32603
- result marshaling error: code -32603
- attempt to subscribe via HTTP: code -32001
In all of the above cases, the server previously returned the default error
code -32000.
Co-authored-by: Nicholas Zhao <nicholas.zhao@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
The p2p msgrate tracker is a thing which tries to estimate some mean round-trip times. However, it did so in a very curious way: if a node had 200 peers, it would sort their 200 respective rtt estimates, and then it would pick item number 2 as the mean. So effectively taking third fastest and calling it mean. This probably works "ok" when the number of peers are low (there are other factors too, such as ttlScaling which takes some of the edge off this) -- however when the number of peers is high, it becomes very skewed.
This PR instead bases the 'mean' on the square root of the length of the list. Still pretty harsh, but a bit more lenient.
This PR includes minor updates to comments in trie/committer that reference insertion to the db, and adds an err != nil check for the return value of preimages.commit.
This PR simplifies the logic of chain tracer and also adds the unit tests.
The most important change has been made in this PR is the state management. Whenever a tracing state is acquired there is a corresponding release function be returned as well. It must be called once the state is used up, otherwise resource leaking can happen.
And also the logic of state management has been simplified a lot. Specifically, the state provider(eth backend, les backend) should ensure the state is available and referenced. State customers can use the state according to their own needs, or build other states based on the given state. But once the release function is called, there is no guarantee of the availability of the state.
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
The JSON-RPC spec requires the "version" field to be exactly "2.0",
so we should verify that. This change is not backwards-compatible with
sloppy client implementations, but I decided to go ahead with it anyway
because the failure will be caught via the returned error.
This adds a generic mechanism for 'dial options' in the RPC client,
and also implements a specific dial option for the JWT authentication
mechanism used by the engine API. Some real tests for the server-side
authentication handling are also added.
Co-authored-by: Joshua Gutow <jgutow@optimism.io>
Co-authored-by: Felix Lange <fjl@twurst.com>
It's a trivial PR to hide the error log when the trie node is not found in the database. The idea for this change is for all TryXXX functions, the error is already returned and we don't need to fire a log explicitly.
Recently there are a few tickets #25613#25589 reporting that the trie nodes are missing because of debug.SetHead. The root cause is after resetting, the chain rewinds to a historical point and re-imports the blocks on top.
Since the node is already synced and started to accept transactions previously, these transactions are still kept in the txpool and verified by txpool with a live state. This live state is constructed based on the live trie database, which is changed fast by node referencing and de-referencing.
Unfortunately, when we construct a live state(like the state in txpool), we don't reference the state we have. The blockchain will garbage collect the intermediate version nodes in another thread which leads the broken live state.
The best solution for this is to forcibly obtain a reference for all live states we create and call release function once it's used up. But it might end up with more junks persisted into disk. Will try to find an elegant solution later in the following PR.
Some small fixes to get the existing debug methods to conform to the spec. Mainly dropping the encoding information from the method name as it should be deduced from the debug context and allowing the method to be invoked by either block number or block hash. It also adds the method debug_getTransaction which returns the raw tx bytes by tx hash. This is pretty much equivalent to the eth_getRawTransactionByHash method.
* eth/catalyst: warn less frequently if no beacon client is available
* eth/catalyst: tweak warning frequency a bit
* eth/catalyst: some more tweaks
* Update api.go
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/fetcher: introduce some lag in tx fetching
* eth/fetcher: change conditions a bit
* eth/fetcher: use per-batch quota check
* eth/fetcher: fix some comments
* eth/fetcher: address review concerns
* eth/fetcher: fix panic + add warn log
* eth/fetcher: fix log
* eth/fetcher: fix log
* cmd/devp2p/internal/ethtest: fix ignorign tx announcements from prev. tests
* cmd/devp2p/internal/ethtest: fix TestLargeTxRequest
This increases the number of tx relay messages the test waits for. Since
go-ethereum now processes incoming txs in smaller batches, the
announcement messages it sends are also smaller.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a cache for block logs which is shared by all filters. The cache
size of is configurable using the `--cache.blocklogs` flag.
Co-authored-by: Felix Lange <fjl@twurst.com>
This avoids copying the input []byte while decoding trie nodes. In most
cases, particularly when the input slice is provided by the underlying
database, this optimization is safe to use.
For cases where the origin of the input slice is unclear, the copying version
is retained. The new code performs better even when the input must be
copied, because it is now only copied once in decodeNode.
* core, trie: flush preimages to db on database close
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* rename Close to CommitPreimages for clarity
* core, trie: nitpick fixes
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This adds support for building statically-linked executables using ci.go.
Static linking is enabled by default in Docker builds, making it possible to
use the geth executable in any Docker image, regardless of the Linux
distribution the Dockerfile is based on.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR allows users to pass in a config object directly to the tracers. Previously only the struct logger was configurable.
It also adds an option to the call tracer which if enabled makes it ignore any subcall and collect only information about the top-level call. See #25419 for discussion.
The tracers will silently ignore if they are passed a config they don't care about.
* core: use TryGetAccount to read where TryUpdateAccount has been used to write
* Gary's review feedback
* implement Gary's suggestion
* fix bug + rename NewSecure into NewStateTrie
* trie: add backwards-compatibility aliases for SecureTrie
* Update database.go
* make the linter happy
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Because the goal of eth_createAccessList is providing the caller with the largest-possible
access list, it's generally not important that the gas limit used by the tracer will match the usage
of the call exactly. Avoiding the gas estimation step is a performance improvement. As long as the
call does not branch based on gas limit, the returned access list will be accurate.
This change makes http.Server.ReadHeaderTimeout configurable separately
from ReadTimeout for RPC servers. The default is set to the same as
ReadTimeout, which in order to cause no change in existing deployments.
* eth: support bubbling up bad blocks from sync to the engine API
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* Update eth/catalyst/api.go
* eth/catalyst: when forgetting bad hashes, also forget descendants
* eth/catalyst: minor bad block tweaks for resilience
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
During RPC calls such as eth_call and eth_estimateGas, st.evm.Config.NoBaseFee is set
which allows the gas price to be below the base fee. This results the tip being negative,
and balance being subtracted from the coinbase instead of added to it, which results in a
potentially negative coinbase balance interestingly. This can't happen during normal chain
processing as outside of RPC calls the gas price is required to be at least the base fee,
as NoBaseFee is false.
This change prevents this behavior by disabling fee payment when the fee is not set.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* Remove locking in (*BlockChain).ExportN
Since ExportN is read-only, it shouldn't need the lock. (?)
* Add hash check to detect reorgs during export.
* fix check order
* Update blockchain.go
* Update blockchain.go
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* internal/ethapi: error if tx args includes chain id that doesn't match local
* internal/ethapi: simplify code a bit
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Adds a native tracer that returns that in case of failure returns the error message or the revert reason of a transaction.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This change ensures the HTTP server will always terminate within
at most 5s, even when all connections are busy and do not become
idle.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/catalyst: disallow importing blocks via newPayload during snap sync
* eth/catalyst: make tests pass by using full sync only
* eth/catalysts: make the import delay a bit cleaner
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change updates our urfave/cli dependency to the v2 branch of the library.
There are some Go API changes in cli v2:
- Flag values can now be accessed using the methods ctx.Bool,
ctx.Int, ctx.String, ... regardless of whether the flag is 'local' or
'global'.
- v2 has built-in support for flag categories. Our home-grown category
system is removed and the categories of flags are assigned as part of
the flag definition.
For users, there is only one observable difference with cli v2: flags must now
strictly appear before regular arguments. For example, the following command is
now invalid:
geth account import mykey.json --password file.txt
Instead, the command must be invoked as follows:
geth account import --password file.txt mykey.json
This changes the []byte <-> Uint8Array conversion to use an
ArrayBuffer, avoiding inefficient copying of the slice data in Goja.
Co-authored-by: Felix Lange <fjl@twurst.com>
The oss-fuzz engine crashes due to stack overflow decoding a large nested
structure into a interface{}. This PR limits the size of the input data, so
should avoid such crashes.
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
Previously on Geth startup we just logged the chain config is a semi-json-y format. Whilst that worked while we had a handful of hard-forks defined, currently it's kind of unwieldy.
This PR converts that original data dump and converts it into a user friendly - alas multiline - log output.
* accounts/abi/bind: fix duplicate field names in the generated go struct #24627
* accounts, cmd/abigen: resolve name conflicts
* ci lint, accounts/abi: remove unused function overloadedArgName
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR adds support for block overrides when doing debug_traceCall.
- Previously, debug_traceCall against pending erroneously used a common.Hash{} stateroot when looking up the state, meaning that a totally empty state was used -- so it always failed,
- With this change, we reject executing debug_traceCall against pending.
- And we add ability to override all evm-visible header fields.
In #24028 we flagged a warning when finding legacy receipts in the freezer. This PR nudges users a bit more strongly by preventing geth from starting in this case until receipts have been migrated.
It also adds a flag --ignore-legacy-receipts which when present allows geth to start normally.
#23773 added a JS tracer which uses Goja as its engine. In this PR I remove the previous tracer which used duktape as well as remove the dependencies.
This PR also comes with 2 fixes in the Goja tracer and one small behavioural change:
I had handled errors in the native Go functions by panicing. My oversight was that Goja only handles panics with a Goja.Value as argument. The difference is panic(goja.Value) allows JS to catch the exception whereas Interrupt(error) doesn't.
There was a race in how I handled Stop.
Because of 1. some of the methods that simply return nil on error (like memory.slice) now throw an exception.
This adds a JS tracer runtime environment based on the Goja VM. The new
runtime replaces the duktape runtime, which will be removed soon.
Goja is implemented in Go and is faster for cases where the Go <-> JS
transition overhead dominates overall performance. It is faster because
duktape is written in C, and the transition cost includes the cost of using
cgo. Another reason for using Goja is that go-duktape is not maintained
anymore.
We expect the performace of JS tracing to be at least as good or better with
this change.
* eth/catalyst: build the execution payload async
* miner: added comment, added test case
* eth/catalyst: miner: move async block production to miner
* eth/catalyst, miner: support generate seal block async
* miner: rework GetSealingBlockAsync to use a passed channel
* miner: apply rjl's diff
* eth/catalyst: nitpicks
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* ethdb/remotedb, cmd: add support for remote (readonly) databases
* ethdb/remotedb: minor changes
* ethdb/remotedb: close the conn
* cmd, ethdb: add rpc accessor for ancient data
* internal/ethapi: license
* ethdb/remotedb: linter fixes
This PR adds db tooling (geth db check-state-content) to verify the integrity of trie nodes. It iterates through the 32-byte key space in the database, which is expected to contain RLP-encoded trie nodes, addressed by hash.
* eth/protocols/snap: don't include empty snapshot slot slice
This PR fixes the snapshot storage serving handler. In snap protocol
the response is capped by the response size. Server can cutdown the
response if the accumulated byte size exceeds the local hard limit.
It means we can meet a special scenario that there is no storage slot
included for a requested account, but we attach the proof for this
account by mistake.
So in the prover side, when it meets a empty storage response but with
a valid proof proves there are some more slots left in the trie, then
requestor will reject this response and disconnect with server.
In this PR, if there is no storage slot served for the requested account,
then no proof should be attached as well.
* eth/protocols/snap: loosen restrictions for flaky tests
* eth/catalyst: fix flaky test in catalyst
Previously freezer has only been used for storing ancient chain data, while obviously it can be used more. This PR unties the chain data and freezer, keep the minimal freezer structure and move all other logic (like incrementally freezing block data) into a separate structure called ChainFreezer.
This PR also extends the database interface by adding a new ancient store function AncientDatadir which can return the root directory of ancient store. The ancient root directory can be used when we want to open some other ancient-stores (e.g. reverse diff freezer).
During mining, when a new head arrives and interrupts the block building, the block being built should not be commited (but discarded). Committing the interrupted block introduces unnecessary delay, and possibly causes miner to mine on the previous head, which could result in higher uncle rate.
* core: recover the state in SetChainHead if the head state is missing
* core: disable test logging
* core: address comment from martin
* core: improve log level in case state is recovered
* core, eth, les, light: rename SetChainHead to SetCanonical
This PR improves the docker build speed for repeated builds where go.mod and go.sum do no change, by placing the downloaded dependencies in a lower layer
This PR groups all built-in network flags together and list them in the command as a whole.
And all database path flags(datadir, ancient) are also grouped, since usually these two are
used together.
This adds the ability to run --state.fork=Merged, and have post-merge rules apply. When doing so, it also requires the input env to contain currentRandom, and enforces the currentDifficulty to be omitted or zero.
This PR fixes up the example python clef wrapper. The poc is intended to demonstrate how to wite a UI for clef, and had severely bitrotted.
With these changes, it "works" in the sense that all the built-in tests triggers the intended python callbacks (no errors about method not found). It does not "work" in the sense that the wrapper can be used as an actual UI. It will auto-reject any signing requests, for example.
This PR fixes the flaw that @rjl493456442 found in https://github.com/ethereum/go-ethereum/pull/#issuecomment-1093817551 , namely, that the snapshot iterator uses the combined (disk + difflayers) 'view', wheres the raw iterator uses only the disk 'view'.
This PR instead splits up the work: one phase is iterating the disk layer data, another phase is loading the journalled difflayers and performing the same check there.
This change removes extraneous/unnecessary checks for equality
when comparing 2 accessList values A and B. Given that we validate that
their lengths of A and B are equal, if so and if every element in A is
in B, reflexively every element in B is already in A. If that weren't
the case and an element g existed in A but not in B, that would mean
that there is an extra element and hence a mathematical contradiction.
Fixes#24658
See ethereum/go-ethereum#24554 and btcsuite/btcd#1839
This is an attempt to resolve a Go module dependency issue that arises
when both 'github.com/btcsuite/btcd/btcec/v2' and the older, non-v2
btcd module are required as dependencies.
* eth/downloader: remove stale beacon headers as backfilling progresses
* eth/downloader: remove leftover from a previous design
* eth/downloader: do partial beacon cleanups if chain is large
* eth/downloader: linter != heart
This adds a tools.go file to import all command packages used for
go:generate. Doing so makes it possible to execute go-based code
generators using 'go run', locking in the tool version using go.mod.
Co-authored-by: Felix Lange <fjl@twurst.com>
If a pending contract call errors, return that error right away rather
than ignoring it to allow an error somewhere else. This is helpful for
callers to know if perhaps a call failed because of the context deadline
being expired. This change mirrors the behavior of non-pending contract
calls.
This PR fixes a few panics in the chain marker benchmarks. The root
cause for panic is in chain marker the genesis header/block is not
accessible, while it's expected to be obtained in tests. So this PR
avoids touching genesis header at all to avoid panic.
This commit replaces ioutil.TempDir with t.TempDir in tests. The
directory created by t.TempDir is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using ioutil.TempDir
had to be removed manually by calling os.RemoveAll, which is omitted in
some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but t.TempDir handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* eth/tracers: refactor traceTx to separate out struct logging
review fix
Update eth/tracers/api.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Mv ExecutionResult type to logger package
review fix
impl GetResult for StructLogger
make formatLogs private
confused exit and end..
account for intrinsicGas in structlogger, fix TraceCall test
Add Stop method to logger
Simplify traceTx
Fix test
rm logger from blockchain test
account for refund in structLogger
* use tx hooks in struct logger
* minor
* avoid executionResult in struct logger
* revert blockchain test changes
* core,eth: add empty tx logger hooks
* core,eth: add initial and remaining gas to tx hooks
* store tx gasLimit in js tracer
* use gasLimit to compute intrinsic cost for js tracer
* re-use rules in transitiondb
* rm logs
* rm logs
* Mv some fields from Start to TxStart
* simplify sender lookup in prestate tracer
* mv env to TxStart
* Revert "mv env to TxStart"
This reverts commit 656939634b9aff19f55a1cd167345faf8b1ec310.
* Revert "simplify sender lookup in prestate tracer"
This reverts commit ab65bce48007cab99e68232e7aac2fe008338d50.
* Revert "Mv some fields from Start to TxStart"
This reverts commit aa50d3d9b2559addc80df966111ef5fb5d0c1b6b.
* fix intrinsic gas for prestate tracer
* add comments
* refactor
* fix test case
* simplify consumedGas calc in prestate tracer
Trie tracer is an auxiliary tool to capture all deleted nodes
which can't be captured by trie.Committer. The deleted nodes
can be removed from the disk later.
This PR adds a ExtraAllowedPath field to Solidity and exposes two APIs: CompileSource and CompileFiles, which were hidden inside CompileSolidityString and CompileSolidity before.
* eth/catalyst: only apply block if we actually have the state
* add header to payload queue
* Update cmd/geth/dbcmd.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/geth: only check for presence of legacy receipts if developer mode is not enabled
* cmd/geth: degrade log level
* cmd/geth: fix format
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* cmd,core: add simple legacy receipt converter
core/rawdb: use forEach in migrate
core/rawdb: batch reads in forEach
core/rawdb: make forEach anonymous fn
cmd/geth: check for legacy receipts on node startup
fix err msg
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
fix log
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
fix some review comments
add warning to cmd
drop isLegacy fn from migrateTable params
add test for windows rename
test replacing in windows case
* minor fix
* sanity check for tail-deletion
* add log before moving files around
* speed-up hack for mainnet
* fix mainnet check, use networkid instead
* check mainnet genesis
* review fixes
* resume previous migration attempt
* core/rawdb: lint fix
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/beacon: eth/catalyst: updated engine api to new version
* core: implement exchangeTransitionConfig
* core/beacon: prevRandao instead of Random
* eth/catalyst: Fix ExchangeTransitionConfig, add test
* eth/catalyst: stop external miners on TTD reached
* node: implement --authrpc.vhosts flag
* core: allow for config override on non-mainnet networks
* eth/catalyst: fix peters comments
* eth/catalyst: make stop remote sealer more explicit
* eth/catalyst: add log output
* cmd/utils: rename authrpc.host to authrpc.addr
* eth/catalyst: disable the disabling of the miner
* eth: core: remove notion of terminal pow block
* eth: les: more of peters nitpicks
This updates the no-cgo implementations in the crypto package to use
the github.com/btcsuite/btcd/btcec/v2 module instead of the older btcec
package that was part of the main github.com/btcsuite/btcd module.
name old time/op new time/op delta
EcrecoverSignature-32 198µs ± 0% 144µs ± 0% -27.11%
VerifySignature-32 177µs ± 0% 128µs ± 0% -27.44%
DecompressPubkey-32 20.9µs ± 0% 10.1µs ± 0% -51.51%
Use (*ModNScalar).IsOverHalfOrder instead of math/big.Int when checking
for malleable signatures.
* cmd, eth: Rename whitelist argument to peer.requiredblocks
* eth/ethconfig: document PeerRequiredBlocks better
* cmd/utils: rename new flag to --eth.requiredblocks
Co-authored-by: Felix Lange <fjl@twurst.com>
* trie: fix memory leak in trie iterator
In the trie iterator, live nodes are tracked in a stack while iterating.
Popped node states should be explictly set to nil in order to get
garbage-collected.
* trie: fix empty trie iterator
* eth/downloader: implement beacon sync
* eth/downloader: fix a crash if the beacon chain is reduced in length
* eth/downloader: fix beacon sync start/stop thrashing data race
* eth/downloader: use a non-nil pivot even in degenerate sync requests
* eth/downloader: don't touch internal state on beacon Head retrieval
* eth/downloader: fix spelling mistakes
* eth/downloader: fix some typos
* eth: integrate legacy/beacon sync switchover and UX
* eth: handle UX wise being stuck on post-merge TTD
* core, eth: integrate the beacon client with the beacon sync
* eth/catalyst: make some warning messages nicer
* eth/downloader: remove Ethereum 1&2 notions in favor of merge
* core/beacon, eth: clean up engine API returns a bit
* eth/downloader: add skeleton extension tests
* eth/catalyst: keep non-kiln spec, handle mining on ttd
* eth/downloader: add beacon header retrieval tests
* eth: fixed spelling, commented failing tests out
* eth/downloader: review fixes
* eth/downloader: drop peers failing to deliver beacon headers
* core/rawdb: track beacon sync data in db inspect
* eth: fix review concerns
* internal/web3ext: nit
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This PR adds the `NextBaseFeePerGas` to `Block` and `EffectiveTip` to `Transaction` to make it easier for clients to compute fee history themselves via graphql queries.
* core/rawdb, cmd, ethdb, eth: implement freezer tail deletion
* core/rawdb: address comments from martin and sina
* core/rawdb: fixes cornercase in tail deletion
* core/rawdb: separate metadata into a standalone file
* core/rawdb: remove unused code
* core/rawdb: add random test
* core/rawdb: polish code
* core/rawdb: fsync meta file before manipulating the index
* core/rawdb: fix typo
* core/rawdb: address comments
This change speeds up trie hashing and all other activities that require
RLP encoding of trie nodes by approximately 20%. The speedup is achieved by
avoiding reflection overhead during node encoding.
The interface type trie.node now contains a method 'encode' that works with
rlp.EncoderBuffer. Management of EncoderBuffers is left to calling code.
trie.hasher, which is pooled to avoid allocations, now maintains an
EncoderBuffer. This means memory resources related to trie node encoding
are tied to the hasher pool.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth, cmd: allow FdLimit to be set in config/command line (#24148)
* eth/ethconfig: format code
* cmd, eth/ethconfig: simplify fdlimit arg, disallow toml
* cnd/utils: make fdlimit setting nicer on the logs
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* rpc, node: refactor request validation and add jwt validation
* node, rpc: fix error message, ignore engine api in RegisterAPIs
* node: make authenticated port configurable
* eth/catalyst: enable unauthenticated version of engine api
* node: rework obtainjwtsecret (backport later)
* cmd/geth: added auth port flag
* node: happy lint, happy life
* node: refactor authenticated api
Modifies the authentication mechanism to use default values
* node: trim spaces and newline away from secret
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This replaces the simple selector parser in signer/fourbyte with one that
can actually handle most types. The new parser is added in accounts/abi
to also make it useable elsewhere.
* go.mod: update azure-storage-blob-go
update Azure/azure-storage-blob-go from v0.7.0 to v0.14.0.
relation #24396.
* internal/build: fix for breaking changes of azure-storage-blob-go
fix for breaking changes of update Azure/azure-storage-blob-go from v0.7.0 to v0.14.0.
relation #24396.
* internal/build: switch azure sdk from Azure/azure-storage-blob-go to Azure/azure-sdk-for-go/sdk/storage/azblob.
* internal/build refactor appending BlobItems
* internal/build: fix azure blobstore client to include container id
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This change makes use of the new code generator rlp/rlpgen to improve the
performance of RLP encoding for Header and StateAccount. It also speeds up
encoding of ReceiptForStorage using the new rlp.EncoderBuffer API.
The change is much less transparent than I wanted it to be, because Header and
StateAccount now have an EncodeRLP method defined with pointer receiver. It
used to be possible to encode non-pointer values of these types, but the new
method prevents that and attempting to encode unadressable values (even if
part of another value) will return an error. The error can be surprising and may
pop up in places that previously didn't expect any errors.
To make things work, I also needed to update all code paths (mostly in unit tests)
that lead to encoding of non-pointer values, and pass a pointer instead.
Benchmark results:
name old time/op new time/op delta
EncodeRLP/legacy-header-8 328ns ± 0% 237ns ± 1% -27.63% (p=0.000 n=8+8)
EncodeRLP/london-header-8 353ns ± 0% 247ns ± 1% -30.06% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 237ns ± 0% 123ns ± 0% -47.86% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 297ns ± 0% 301ns ± 1% +1.39% (p=0.000 n=8+8)
name old speed new speed delta
EncodeRLP/legacy-header-8 1.66GB/s ± 0% 2.29GB/s ± 1% +38.19% (p=0.000 n=8+8)
EncodeRLP/london-header-8 1.55GB/s ± 0% 2.22GB/s ± 1% +42.99% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 38.0MB/s ± 0% 64.8MB/s ± 0% +70.48% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 910MB/s ± 0% 897MB/s ± 1% -1.37% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
EncodeRLP/legacy-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/london-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/receipt-for-storage-8 64.0B ± 0% 0.0B -100.00% (p=0.000 n=8+8)
EncodeRLP/receipt-full-8 320B ± 0% 320B ± 0% ~ (all equal)
This change adds a code generator tool for creating EncodeRLP method
implementations. The generated methods will behave identically to the
reflect-based encoder, but run faster because there is no reflection overhead.
Package rlp now provides the EncoderBuffer type for incremental encoding. This
is used by generated code, but the new methods can also be useful for
hand-written encoders.
There is also experimental support for generating DecodeRLP, and some new
methods have been added to the existing Stream type to support this. Creating
decoders with rlpgen is not recommended at this time because the generated
methods create very poor error reporting.
More detail about package rlp changes:
* rlp: externalize struct field processing / validation
This adds a new package, rlp/internal/rlpstruct, in preparation for the
RLP encoder generator.
I think the struct field rules are subtle enough to warrant extracting
this into their own package, even though it means that a bunch of
adapter code is needed for converting to/from rlpstruct.Type.
* rlp: add more decoder methods (for rlpgen)
This adds new methods on rlp.Stream:
- Uint64, Uint32, Uint16, Uint8, BigInt
- ReadBytes for decoding into []byte
- MoreDataInList - useful for optional list elements
* rlp: expose encoder buffer (for rlpgen)
This exposes the internal encoder buffer type for use in EncodeRLP
implementations.
The new EncoderBuffer type is a sort-of 'opaque handle' for a pointer to
encBuffer. It is implemented this way to ensure the global encBuffer pool
is handled correctly.
This PR adds an addtional API called `NewBatchWithSize` for db
batcher. It turns out that leveldb batch memory allocation is
super inefficient. The main reason is the allocation step of
leveldb Batch is too small when the batch size is large. It can
take a few second to build a leveldb batch with 100MB size.
Luckily, leveldb also offers another API called MakeBatch which can
pre-allocate the memory area. So if the approximate size of batch is
known in advance, this API can be used in this case.
It's needed in new state scheme PR which needs to commit a batch of
trie nodes in a single batch. Implement the feature in a seperate PR.
This functionality is needed in new path-based storage scheme, but
can be implemented in a seperate PR though.
When an account is deleted, then all the storage slots should be
nuked out from the disk as well. In hash-based storage scheme they
are still left in the disk but in new scheme, they will be iterated
and marked as deleted.
But why the NodeBlob API is needed in this scenario? Because when
the node is marked deleted, the previous value is also required to
be recorded to construct the reverse diff.
This change makes it so WaitMined no longer logs an error when the receipt
is unavailable. It also changes the simulated backend to return NotFound for
unavailable receipts, just like ethclient does.
I believe the sentence is attempting to explain that the URL is "[used] by upper layers to define a sorting order over all wallets from multiple backends."
* eth/tracers: add initial native prestate tracer
* fix balance hex
* handle prestate for tx from and to
* drop created contract from prestate
* fix sender balance
* use switch instead
Co-authored-by: Martin Holst Swende <martin@swende.se>
* minor fix
* lookup create2 account
* mv code around a bit
* check stackLen for create2
* fix transfer tx for js prestate tracer
* fix create2 addr
* track extcodehash in js prestate tracer
Co-authored-by: Martin Holst Swende <martin@swende.se>
When talking to an HTTP2 server, there are situations where it needs to
"rewind" the Request.Body. To allow this, we have to set up the Request.GetBody
function to return a brand new instance of the body.
If not set, we can end up with the following error:
http2: Transport: cannot retry err [http2: Transport received Server's graceful shutdown GOAWAY] after Request.Body was written; define Request.GetBody to avoid this error
See this commit for more information: https://sourcegraph.com/github.com/golang/net/-/commit/cffdcf672aee934982473246bc7e9a8ba446aa9b?visible=2
* eth, miner: remove duplicated code
* eth/catalyst: remove unneeded code
* miner: keep update pending state even the Merge is happened
* eth, miner: rebase
* miner: fix tests
* eth, miner: address comments from marius
* miner: use empty zero randomness for pending blocks after the merge
* eth/catalyst: gofmt
* miner: add warning log for state recovery
* miner: ignore uncles for post-merge blocks
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* trie/proof: edge case for VerifyRangeProof
* more consistency with other tests in the file
* trie: fix test todo
Co-authored-by: Martin Holst Swende <martin@swende.se>
This replaces the sketchy and undocumented string context keys for HTTP requests
with a defined interface. Using string keys with context is discouraged because
they may clash with keys created by other packages.
We added these keys to make connection metadata available in the signer, so this
change also updates signer/core to use the new PeerInfo API.
* eth/catalyst: evict old payloads, type PayloadID
* eth/catalyst: added tracing info to engine api
* eth/catalyst: add test for create payload timestamps
* catalyst: better logs
* eth/catalyst: computePayloadId return style
* catalyst: add queue for payloads
* eth/catalyst: nitpicks
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* freezer: add readonly flag to table
* freezer: enforce readonly in table repair
* freezer: enforce readonly in newFreezer
* minor fix
* minor
* core/rawdb: test that writing during readonly fails
* rm unused log
* check readonly on batch append
* minor
* Revert "check readonly on batch append"
This reverts commit 2ddb5ec4ba7534bf6edbdfec158ea99a2eed5036.
* review fixes
* minor test refactor
* attempt at fixing windows issue
* add comment re windows sync issue
* k->kind
* open readonly db for genesis check
Co-authored-by: Martin Holst Swende <martin@swende.se>
Using curve P384 for encryption causes the error "ecies: shared key params
are too big". Also, readme.md says curve P384 should use AES192 not AES256.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* core: implement eip-4399 random opcode
* core: make vmconfig threadsafe
* core: miner: pass vmConfig by value not reference
* all: enable 4399 by Rules
* core: remove diff (f)
* tests: set proper difficulty (f)
* smaller diff (f)
* eth/catalyst: nit
* core: make RANDOM a pointer which is only set post-merge
* cmd/evm/internal/t8ntool: fix t8n tracing of 4399
* tests: set difficulty
* cmd/evm/internal/t8ntool: check that baserules are london before applying the merge chainrules
SyncProgress was modified in PR #23576 to add the fields reported for
snap sync. The PR also changed ethclient to use the SyncProgress struct
directly instead of wrapping it for hex-decoding. This broke the
SyncProgress method.
Fix it by putting back the custom wrapper. While here, also put back the
fast sync related fields because SyncProgress is stable API and thus
removing fields is not allowed.
Fixes#24180Fixes#24176
Fixes#24167
New behaviour is that the endpoint returns results only for available
blocks without returning an error when it doesn't find a block. Note we
skip any block after a non-existent block.
This adds a header fetch for every block in range (even if header
is not needed). Alternatively, we could do the check in every field's
resolver method to avoid this overhead.
* core/vm: reverse bit order in bytes of code bitmap
This bit order is more natural for bit manipulation operations and we
can eliminate some small number of CPU instructions.
* core/vm: drop lookup table
* consensus: use the maxGasLimit constant to check the header.GasLimit to avoid creating new variables repeatedly
* consensus: check the header.GasLimit by the public constant MaxGasLimit
* consensus: check the header.GasLimit by the constant MaxGasLimit
Previously, Ctrl-C (SIGINT) was ignored during JS execution, so it was not
possible to get out of infinite loops in the console. With this change,
Ctrl-C now interrupts JS.
Fixes#23344
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR reduces the amount of work we do when answering header queries, e.g. when a peer
is syncing from us.
For some items, e.g block bodies, when we read the rlp-data from database, we plug it
directly into the response package. We didn't do that for headers, but instead read
headers-rlp, decode to types.Header, and re-encode to rlp. This PR changes that to keep it
in RLP-form as much as possible. When a node is syncing from us, it typically requests 192
contiguous headers. On master it has the following effect:
- For headers not in ancient: 2 db lookups. One for translating hash->number (even though
the request is by number), and another for reading by hash (this latter one is sometimes
cached).
- For headers in ancient: 1 file lookup/syscall for translating hash->number (even though
the request is by number), and another for reading the header itself. After this, it
also performes a hashing of the header, to ensure that the hash is what it expected. In
this PR, I instead move the logic for "give me a sequence of blocks" into the lower
layers, where the database can determine how and what to read from leveldb and/or
ancients.
There are basically four types of requests; three of them are improved this way. The
fourth, by hash going backwards, is more tricky to optimize. However, since we know that
the gap is 0, we can look up by the parentHash, and stlil shave off all the number->hash
lookups.
The gapped collection can be optimized similarly, as a follow-up, at least in three out of
four cases.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR fixes a special corner case in transaction indexing.
When the chain is rewound by SetHead to a historical point which is even lower than the transaction indexes tail, then system will report Failed to decode block body error all the time, because the relevant blocks are already deleted.
In order to avoid this "non-critical-but-annoying" issue, we can recap the indexing target to head+1(to is excluded, so it means indexing transactions from 0 to head).
Previous link leads to incorrect (more recent) version of web3.js docs.
go-ethereum uses v0.20.1. The docs for 0.2x.x have been archived at this Github link.
* core/vm: Remove interpreter loop interruption check
* core/vm: Unit test for interpreter loop interruption
* core/vm: Check for interpreter loop abort on every jump
The `structs` map is populated by iterating over all methods except the constructor, which results in a nil-pointer dereference.
I've first reproduced the problem with a new test and then implemented the fix.
Co-authored-by: Arran Schlosberg <me@arranschlosberg.com>
* eth/tracers: Add support for REVERT in evmdis_tracer
* evm/tracers: Fix evmdis_tracer to use SELFDESTRUCT instead of SUICIDE
* eth/tracers: Regenerate tracer library
* core/vm: Move interpreter.ReadOnly check into the opcode implementations
Also remove the same check from the interpreter inner loop.
* core/vm: Remove obsolete operation.writes flag
* core/vm: Capture fault states in logger
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/vm: Remove panic added for testing
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/vm: break loop on any error
* core/vm: move ErrExecutionReverted to opRevert()
* core/vm: use "stop token" to stop the loop
* core/vm: unconditionally pc++ in the loop
* core/vm: set return data in instruction impls
Trim the search key from head as it's being pushed deeper into the trie. Previously the search key was never modified but each node kept information how to slice and compare it in keyOffset. Now the keyOffset is not needed as this information is included in the slice of the search key. This way the keyOffset can be removed and key manipulation
simplified.
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: mv loggers to eth/tracers
* core/vm: minor
* eth/tracers: tmp comment out testStoreCapture
* eth/tracers: uncomment and fix logger test
* eth/tracers: simplify test
* core/vm: re-add license
* core/vm: minor
* rename LogConfig to Config
This PR fixes two problems in devp2p tests (and through them, hive).
- Make the output more detailed about what is returned (always print packet kind).
- Allow Ping response to unsolicited findnode.
Without this PR, nethermind fails a hive protocol test, and I misinterpreted the result (NethermindEth/nethermind#3617). Ergo, the output was not fool-proof.
* cmd/evm: rename t8n args to improve clarity when tracing
* cmd/evm: add back removed tracing flags and note that they are deprecated
* cmd/evm: add warning when using deprecated flag
This fixes a bug in TransactionSender where it would return the
zero address for transactions where the sender address wasn't
cached already.
Co-authored-by: Felix Lange <fjl@twurst.com>
* cmd, core: add flag --dev.gaslimit to allow configuring initial block gas limit in dev mode
* core: use provided gaslimit
Co-authored-by: Martin Holst Swende <martin@swende.se>
This was apparently recently changed by Cloudflare, and
began returning an error: 'TTL must be between 60 and 86400
seconds, or 1 for Automatic'
Date: 2021-11-10 15:25:20-08:00
Signed-off-by: meows <b5c6@protonmail.com>
Debugging recent geth failures in hive, it took a while to realize that it's because
geth doesn't support eth/65 any longer. This PR makes such failures a bit more
easy to figure out.
The price limit is supposed to exclude transactions with too low fee
amount. Before EIP-1559, it was sufficient to check the limit against
the gas price of the transaction. After 1559, it is more complicated
because the concept of 'transaction gas price' does not really exist.
When mining, the price limit is used to exclude transactions below a
certain effective fee amount. This change makes it apply the same check
earlier, in tx validation. Transactions below the specified fee amount
cannot enter the pool.
Fixes#23837
This PR fixes a problem which arises on clique networks when there is a network stall. Previously, the worker packages were tracked, even if the sealing engine decided not to seal the block (due to clique rules about recent signing). These tracked-but-not-sealed blocks kept building up in memory.
This PR changes the situation so the sealing engine instead returns an error, and the worker can thus un-track the package.
This avoids quadratic time complexity in the lookup of the batch element
corresponding to an RPC response. Unfortunately, the new approach
requires additional memory for the mapping from ID to index.
Fixes#22805
When we map a file for generating the DAG, we do a simple truncate to e.g. 1Gb. This is fine, even if we have nowhere near 1Gb disk available, as the actual file doesn't take up the full 1Gb, merely a few bytes. When we start generating into it, however, it eventually crashes with a unexpected fault address .
This change fixes it (on linux systems) by using the Fallocate syscall, which preallocates suffcient space on disk to avoid that situation.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR offers two more database sub commands for exporting and importing data.
Two exporters are implemented: preimage and snapshot data respectively.
The import command is generic, it can take any data export and import into leveldb.
The data format has a 'magic' for disambiguation, and a version field for future compatibility.
It is because write known block only checks block and state without snapshot, which could lead to gap between newest snapshot and newest block state. However, new blocks which would cause snapshot to become fixed were ignored, since state was already known.
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Some benchmarks in eth/filters were not good: they weren't reproducible, relying on geth chaindata to be present.
Another one was rejected because the receipt was lacking a backing transcation.
The p2p simulation benchmark had a lot of the warnings below, due to the framework calling both
Stop() and Close(). Apparently, the simulated adapter is the only implementation which has a Close(),
and there is no need to call both Stop and Close on it.
* core: write test showing that TD is not stored properly at genesis
The ToBlock method applies a default value for an empty
difficulty value. This default is not carried over through the Commit
method because the TotalDifficulty database write writes the
original difficulty value (nil) instead of the defaulty value
present on the genesis Block.
Date: 2021-10-22 08:25:32-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* core: write TD value from Block, not original genesis value
This an issue where a default TD value was not written to
the database, resulting in a 0 value TD at genesis.
A test for this issue was provided at 90e3ffd393
Date: 2021-10-22 08:28:00-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* core: fix tests by adding GenesisDifficulty to expected result
See prior two commits.
Date: 2021-10-22 09:16:01-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* les: fix test with genesis change
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR adds a new accessor method to the freezer database. This new view offers a consistent interface, guaranteeing that all individual tables (headers, bodies etc) are all on the same number, and that this number is not changes (added/truncated) while the operation is performing.
* core/state/snapshot: fix BAD BLOCK error when snapshot is generating
* core/state/snapshot: alternative fix for the snapshot generator
* add comments and minor update
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core: fix warning flagging the use of DeepEqual on error
* apply the same change everywhere possible
* revert change that was committed by mistake
* fix build error
* Update config.go
* revert changes to ConfigCompatError
* review feedback
Co-authored-by: Felix Lange <fjl@twurst.com>
* cmd/puppeth: use geth's prompt to read input
* remove wizard.in
* cmd/puppeth: fix compilation errors
* reset prompt (don't exit) on receiving ctrl-c
* make promptInput spin until the user enters a value or interrupts (ctrl-d)
* make promptInput use parameter
Co-authored-by: Martin Holst Swende <martin@swende.se>
Adds suppor for passing regular strings to db `put`/`get`/`delete`, to avoid having to hex-encode when operating on fixed-key items like `SnapshotSyncStatus`, `SnapshotRecovery` etc.
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This is the initial step for support of Solidity errors in contract bindings.
As of this change, errors can be decoded, but are not supported in
bindings yet.
Closes#23157
This fixes a bug where gas-related fields of the TransactOpts passed
to transaction methods would be modified, skipping gas estimation for
subsequent transactions.
Co-authored-by: Yondon Fu <yondon.fu@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This doesn't fix all go-critic warnings, just the most serious ones.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth,rpc: allow for flag configured timeouts for eth_call
* lint: account for package-local import order
* cr: rename `rpc.calltimeout` to `rpc.evmtimeout`
This removes some code:
- The clique engine calculated the snapshot twice when verifying headers/blocks.
- The method GetBlockHashesFromHash in Header/Block/Lightchain was only used by tests. It
is now removed from the API.
- The method GetTdByHash internally looked up the number before calling GetTd(hash, num).
In many cases, callers already had the number, and used this method just because it has a
shorter name. I have removed the method to make the API surface smaller.
* build: increase thread stack size when running alpine linux
* review feedback: force a stack size of 8M on all linux distribs
* fix missing extldflags
node.Node no longer registers any account manager backends by default,
they need to be registered explicitly.
For ethash-based tests, we actually don't need any accounts in the miner
keystore. Just set the etherbase instead to make mining work. For
clique, the signer account must be in the keystore.
The change also adds interrupt handling in stress tests.
This fixes a data race on worker.current by moving the call to StopPrefetcher
into the main loop.
The commit also contains fixes for two other races in unit tests of unrelated packages.
Go 1.17.2 fixes some miscompilation issues on amd64 and a runtime issue with timers.
While the upgrade is not strictly necessary for go-ethereum right now, it is still good
to be up-to-date.
Fixes#23681
After the fix I get the address 0x6d6d02e83c4ced98204e20126acf27e9d87b8af2 for the
tx mentioned in the ticket, which agrees with etherscan.
This change removes misuses of sync.WaitGroup in BlockChain. Before this change,
block insertion modified the WaitGroup counter in order to ensure that Stop would wait
for pending operations to complete. This was racy and could even lead to crashes
if Stop was called at an unfortunate time. The issue is resolved by adding a specialized
'closable' mutex, which prevents chain modifications after stopping while also
synchronizing writers with each other.
Co-authored-by: Felix Lange <fjl@twurst.com>
This resolves a long-standing TODO. The point of copying the address is
to ensure that all data referenced by types.Transaction is independent of the
data passed into the constructor.
Co-authored-by: Felix Lange <fjl@twurst.com>
The test did not synchronize with per-case goroutines, and thus didn't notice
that some tests were just hanging. This change adds missing synchronization
and fixes the broken tests.
This PR fixes an issue in traceChain, where the statedb Commit operation was performed asynchronously with dereference-operations agains the underlying trie.Database instance. Due to how the reference counting works within the trie database (where parent count is recursively updated when new parents are added), doing dereferencing in the middle of Commit can cause the refcount to become wrong, leading to an inconsistent state.
This was fixed by doing Commit/Deref from the same routine.
* core/types: rm extranous check in test
* core/rawdb: add lightweight types for block logs
* core/rawdb,eth: use lightweight accessor for log filtering
* core/rawdb: add bench for decoding into rlpLogs
This PR implements a new debug method, which I've talked briefly about to some other client developers. It allows the caller to obtain the intermediate state roots for a block (which might be either a canon block or a 'bad' block).
* internal: support optional filter expression for debug.stacks
* internal/debug: fix string regexp
* internal/debug: support searching for line numbers too
* ethclient/gethclient: fix flaky test (due to map key ordering)
* accounts/keystore: fix test failing due to rand collision due to low time resolution on windows
This change introduces 2 new optional methods; `enter()` and `exit()` for js tracers, and makes `step()` optiona. The two new methods are invoked when entering and exiting a call frame (but not invoked for the outermost scope, which has it's own methods). Currently these are the data fields passed to each of them:
enter: type (opcode), from, to, input, gas, value
exit: output, gasUsed, error
The PR also comes with a re-write of the callTracer. As a backup we keep the previous tracing script under the name `callTracerLegacy`. Behaviour of both tracers are equivalent for the most part, although there are some small differences (improvements), where the new tracer is more correct / has more information.
* cmd/devp2p/internal/ethtest: only use eth66 if eth66 is negotiated
* cmd/devp2p/internal/ethtest: switch on concrete type not pointer
* cmd/devp2p/internal/ethtest: switch on concrete type not pointer
This PR ensures that wiping all data associated with a node (apart from its nodekey)
will not generate already used sequence number for the ENRs, since all remote nodes
would reject them until they out-number the previously published largest one.
The big complication with this scheme is that every local update to the ENR can
potentially bump the sequence number by one. In order to ensure that local updates
do not outrun the clock, the sequence number is a millisecond-precision timestamp,
and updates are throttled to occur at most once per millisecond.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change is a rewrite of the freezer code.
When writing ancient chain data to the freezer, the previous version first encoded each
individual item to a temporary buffer, then wrote the buffer. For small item sizes (for
example, in the block hash freezer table), this strategy causes a lot of system calls for
writing tiny chunks of data. It also allocated a lot of temporary []byte buffers.
In the new version, we instead encode multiple items into a re-useable batch buffer, which
is then written to the file all at once. This avoids performing a system call for every
inserted item.
To make the internal batching work, the ancient database API had to be changed. While
integrating this new API in BlockChain.InsertReceiptChain, additional optimizations were
also added there.
Co-authored-by: Felix Lange <fjl@twurst.com>
* remove rpc flags
* remove legacy rpc flags
* remove legacy rpc flags
* remove legacy rpc commands
* (hopefully) fix most of the build errors
* fix build errors
https://app.travis-ci.com/github/ethereum/go-ethereum/jobs/530318686
* cmd/utils: fix syntax error
* empty commit to unbreak travis ci
* fix syntax error
* syntax fixes
* syntax fixes
* fix
fixes "cmd/geth/usage.go:234:7: expected '(', found init (typecheck)"
* fix
* various fixes in usage.go
* various fixes in flags.go
* adds extra space
reverts the spacing to how it was before I resolved the merge conflict
* more fixes in usage.go
* fix
fix for cmd/geth/usage.go:243:17: expected operand, found ':=' (typecheck) in travis
* Update cmd/utils/flags.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
* fix error
fixes these errors:
cmd/utils/flags_legacy.go:21:2: "strings" imported but not used (typecheck)
"strings"
^
cmd/utils/flags_legacy.go:24:2: "github.com/ethereum/go-ethereum/node" imported but not used (typecheck)
"github.com/ethereum/go-ethereum/node"
^
* goimports
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/debug: remove deprecated flags
The removed flags are removed in the main portion of geth, this removes it internally too.
* internal/debug: remove legacy --debug and legacy --backtrace flag
* Update flags.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Currently, setDefaults overwrites the transaction input value if only input is provided. This causes personal_sendTransaction to estimate the gas based on a transaction with empty data. eth_estimateGas never calls setDefaults so it was unaffected by this.
Currently rpc.BlockNumber is marshalled to JSON as a numeric value, which is
wrong because BlockNumber.UnmarshalJSON() wants it to either be hex-encoded
or string "earliest"/"latest"/"pending". As a result, the call chain
rpc.BlockNumberOrHashWithNumber(123) -> json.Marshal() -> json.Unmarshal()
fails with error "cannot unmarshal object into Go value of type string".
As per benchmark results below, these changes speed up encoding/decoding of
consensus objects a bit.
name old time/op new time/op delta
EncodeRLP/legacy-header-8 384ns ± 1% 331ns ± 3% -13.83% (p=0.000 n=7+8)
EncodeRLP/london-header-8 411ns ± 1% 359ns ± 2% -12.53% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 251ns ± 0% 239ns ± 0% -4.97% (p=0.000 n=8+8)
EncodeRLP/receipt-full-8 319ns ± 0% 300ns ± 0% -5.89% (p=0.000 n=8+7)
EncodeRLP/legacy-transaction-8 389ns ± 1% 387ns ± 1% ~ (p=0.099 n=8+8)
EncodeRLP/access-transaction-8 607ns ± 0% 581ns ± 0% -4.26% (p=0.000 n=8+8)
EncodeRLP/1559-transaction-8 627ns ± 0% 606ns ± 1% -3.44% (p=0.000 n=8+8)
DecodeRLP/legacy-header-8 831ns ± 1% 813ns ± 1% -2.20% (p=0.000 n=8+8)
DecodeRLP/london-header-8 824ns ± 0% 804ns ± 1% -2.44% (p=0.000 n=8+7)
* rlp: pass length to byteArrayBytes
This makes it possible to inline byteArrayBytes. For arrays, the length is known
at encoder construction time, so the call to v.Len() can be avoided.
* rlp: avoid IsNil for pointer encoding
It's actually cheaper to use Elem first, because it performs less checks
on the value. If the pointer was nil, the result of Elem is 'invalid'.
* rlp: minor optimizations for slice/array encoding
For empty slices/arrays, we can avoid storing a list header entry in the
encoder buffer. Also avoid doing the tail check at encoding time because
it is already known at encoder construction time.
This PR adds functionality to the evm t8n to calculate ethash difficulty. If the caller does not provide a currentDifficulty, but instead provides the parentTimestamp (well, semi-optional, will default to 0 if not given), and parentDifficulty, we can calculate it for him.
The caller can also provide a parentUncleHash. In most, but not all cases, the parent uncle hash also affects the formula. If no such hash is provided (or, if the empty all-zero hash is provided), it's assumed that there were no uncles.
The new linter version is built with go 1.17 and thus includes the go vet
check for mismatched +build and go:build lines.
Fortunately, no new warnings are reported with this update.
In p2p/dial.go, conn.flags was accessed without using sync/atomic.
This race is fixed by removing the access.
In p2p/enode/iter_test.go, a similar race is resolved by writing the field atomically.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds flag to enable InfluxDB v2 (--metrics.influxdbv2), flags for v2-specific features (--metrics.influxdb.token, --metrics.influxdb.bucket), also carries over addition of support for specifying organization (--metrics.influxdb.organization), but still retains backwards compatibility with InfluxDB v1.
* core/rawdb: implement sequential reads in freezer_table
* core/rawdb, ethdb: add sequential reader to db interface
* core/rawdb: lint nitpicks
* core/rawdb: fix some nitpicks
* core/rawdb: fix flaw with deferred reads not being performed
* core/rawdb: better documentation
* internal/ethapi/api: cap highest gas limit by account balance for 1559 fee parameters
* accounts/abi/bind: port gas limit cap for 1559 parameters to simulated backend
* accounts/abi/bind: add test for 1559 gas estimates for the simulated backend
* internal/ethapi/api: fix comment
* accounts/abi/bind/backends, internal/ethapi: unify naming style
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
In many cases, it's desireable to use already-signed transactions as input to the state transition, instead of having the evm sign them internally (for example to use malformed or not-yet-valid transactions). This PR adds support + docs for that feature.
This adds a check to verify that a sender-account does not have code, which means that the codehash is either `emptyCodeHash` _OR_ not present. The latter occurs IFF the sender did not previously exist, a situation which can only occur with zero cost gasprices.
This PR modifies the post-PING-send expectations to both be laxer and stricter: it doesn't care what order the packets arrive, but also verifies that exactly one PING and one PONG is returned.
Ticket #23273 found a flaw where we were unable to sign legacy-transactions
using the external signer, even if we're still on non-london network. That's
fixed in this PR.
Additionally, I found that even when supplying all parameters, it was impossible
to sign a london-transaction on an unsynched node. It's a pretty common usecase
that someone wants to sign a transaction using an unsynced 'vanilla' node,
providing all necessary data. Our setDefaults, however, insisted on checking the
current block against the config. This PR therefore adds a case, so that if both
MaxPriorityFeePerGas and MaxFeePerGas are provided, we accept them as given.
OBS This PR fixes a regression -- on current master, we are unable to sign a
london-transaction unless the node is synched, which may break scenarios where
geth (or clef) is used as a cold wallet.
Fixes#23273
* internal/ethapi: revert + fix properly in al tracer
* internal/ethapi: use toMessage instead of creating new message
* internal/ethapi: remove ineffassign
* core: fix invalid unmarshalling, fix test
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/ethapi/api: use hexutil.uint for blockCount parameter instead of int for feeHistory
* return hex value for oldestBlock instead of number
* return uint64 from oracle.resolveBlockRange
* eth/gasprice: fixed test
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
When processing a transaction with London fork rules, EIP-1559 mandates
checking that the sender must have sufficient balance to cover gas * gasFeeCap.
In the EIP's pseudocode, this check happens after the value transferred by the
transaction has already been deducted. However, in go-ethereum, the balance
has not yet been updated when the check happens, and therefore needs to be
added explicitly.
Co-authored-by: Martin Holst Swende <martin@swende.se>
The encoding of Log and LogForStorage is exactly the same
now. After tracking it down it seems like #17106 changed the
storage schema of logs to be the same as the consensus
encoding.
Support for the legacy format was dropped in #22852 and if
I'm not wrong there's no reason anymore to have these two
equivalent types.
Since the RLP encoding simply contains the first three fields
of Log, we can also avoid creating a temporary struct for
encoding/decoding, and use the rlp:"-" tag in Log instead.
Note: this is an API change in core/types. We decided it's OK
to make this change because LogForStorage is an implementation
detail of go-ethereum and the type has zero uses outside of
package core/types.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR fixes a false positive PONG 'to' endpoint mismatch seen in hive tests:
got {IP:172.17.0.7 UDP:44025 TCP:44025}, want {IP:172.17.0.7 UDP:44025 TCP:0}
Co-authored-by: Felix Lange <fjl@twurst.com>
Some tests take quite some time during exit, which I think causes
some appveyor fails like this:
https://ci.appveyor.com/project/ethereum/go-ethereum/builds/39511210/job/xhom84eg2e4uulq3
One of the things that seem to take time during exit is waiting
(up to 100ms) for the syncbloom to close. This PR changes it to use
a channel, instead of looping with a 100ms wait.
This also includes some unrelated changes improving the reliability of
eth/fetcher tests, which fail a lot because they are time-dependent.
This commit adds the package gethclient which is similar to the ethclient
and implements some geth specific functionality.
Co-authored-by: Edgar Aroutiounian <edgar.factorial@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes transaction sending in the case where an app using go-ethereum v1.10.4
is talking to a pre-EIP-1559 RPC node. In this case, the eth_maxPriorityFeePerGas
endpoint is not available and we can only rely on eth_gasPrice.
* core,eth/tracers: make isPrecompiled dependent on HF
* eth/tracers: use keys when constructing chain config struct
* eth/tracers: dont initialize activePrecompiles with random value
This change increases the cache size from 64 to 256 Mb for block bodies.
Benchmarks have shown this to be one bottleneck when trying to achieve
higher download speeds.
The commit also includes a minor optimization for header inserts in package
core: previously, the presence of headers in the database was checked for
every header before writing it. With the change, if one header fails the
presence check, all subsequent headers are also assumed to be missing.
This is an improvement because in practice, the headers are almost always
missing during sync.
Previously, the test waited a second and then failed if geth had not
started. This caused the test to fail intermittently. This change checks
whether the IPC is open 10 times over a 5 second period and then fails
if geth is still not available.
The `README.md` links the Gitter channel for discussions, but the
official docs and even the Gitter channel itself recommend using the
official Discord Server for such discussions.
This PR simply changes the Gitter link and provides Discord invite link.
When deleting in fullNode, and the new child node nn is not nil, there is no need
to check the number of non-nil entries in the node. This is because the fullNode
must've contained at least two children before deletion, so there must be another
child node other than nn.
Co-authored-by: Felix Lange <fjl@twurst.com>
Copy the CliqueConfig instead of reusing the pointer.
This makes DeveloperGenesisBlock thread safe and prevents it from
changing params.AllCliqueProtocolChanges.Clique.Epoch.
* accounts/abi/bind: fix bounded contracts and sim backend for 1559
* accounts/abi/bind, ethclient: don't rely on chain config for gas prices
* all: enable London for all internal tests
* les: get receipt type info in les tests
* les: fix weird test
Co-authored-by: Martin Holst Swende <martin@swende.se>
This function is not used in the code base, so probably safe to do rename, or remove in its entirety, but I'm assuming the logic from the original creator still applies so rename probably better.
* internal/ethapi: add baseFee to RPCMarshalHeader
* internal/ethapi: add FeeCap, Tip and correct GasPrice to EIP-1559 RPCTransaction results
* core,eth,les,internal: add support for tip estimation in gas price oracle
* internal/ethapi,eth/gasprice: don't suggest tip larger than fee cap
* core/types,internal: use correct eip1559 terminology for json marshalling
* eth, internal/ethapi: fix rebase problems
* internal/ethapi: fix rpc name of basefee
* internal/ethapi: address review concerns
* core, eth, internal, les: simplify gasprice oracle (#25)
* core, eth, internal, les: simplify gasprice oracle
* eth/gasprice: fix typo
* internal/ethapi: minor tweak in tx args
* internal/ethapi: calculate basefee for pending block
* internal/ethapi: fix panic
* internal/ethapi, eth/tracers: simplify txargs ToMessage
* internal/ethapi: remove unused param
* core, eth, internal: fix regressions wrt effective gas price in the evm
* eth/gasprice: drop weird debug println
* internal/jsre/deps: hack in 1559 gas conversions into embedded web3
* internal/jsre/deps: hack basFee to decimal conversion
* internal/ethapi: init feecap and tipcap for legacy txs too
* eth, graphql, internal, les: fix gas price suggestion on all combos
* internal/jsre/deps: handle decimal tipcap and feecap
* eth, internal: minor review fixes
* graphql, internal: export max fee cap RPC endpoint
* internal/ethapi: fix crash in transaction_args
* internal/ethapi: minor refactor to make the code safer
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: gary rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This commit changes the behavior of BitCurve.Add to be more inline
with btcd. It fixes two different bugs:
1) When adding a point at infinity to another point, the other point
should be returned. While this is undefined behavior, it is better
to be more inline with the go standard library.
Thus (0,0) + (a, b) = (a,b)
2) Adding the same point to itself produced the point at infinity.
This is incorrect, now doubleJacobian is used to correctly calculate it.
Thus (a,b) + (a,b) == 2* (a,b) and not (0,0) anymore.
The change also adds a differential fuzzer for Add, testing it against btcd.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change significantly improves the performance of RLPx message reads
and writes. In the previous implementation, reading and writing of
message frames performed multiple reads and writes on the underlying
network connection, and allocated a new []byte buffer for every read.
In the new implementation, reads and writes re-use buffers, and perform
much fewer system calls on the underlying connection. This doubles the
theoretically achievable throughput on a single connection, as shown by
the benchmark result:
name old speed new speed delta
Throughput-8 70.3MB/s ± 0% 155.4MB/s ± 0% +121.11% (p=0.000 n=9+8)
The change also removes support for the legacy, pre-EIP-8 handshake encoding.
As of May 2021, no actively maintained client sends this format.
Fixes the case (example below) where the value passed
to --ethstats flag would be parsed wrongly because the
node name and/or password value contained the special
characters '@' or ':'
--ethstats "ETC Labs Metrics @meowsbits":mypass@ws://mordor.dash.fault.dev:3000
This PR refactors the eth test suite to make it more readable and
easier to use. Some notable differences:
- A new file helpers.go stores all of the methods used between
both eth66 and eth65 and below tests, as well as methods shared
among many test functions.
- suite.go now contains all of the test functions for both eth65
tests and eth66 tests.
- The utesting.T object doesn't get passed through to other helper methods,
but is instead only used within the scope of the test function,
whereas helper methods return errors, so only the test function
itself can fatal out in the case of an error.
- The full test suite now only takes 13.5 seconds to run.
There are two transaction parameter structures defined in
the codebase, although for different purposes. But most of
the parameters are shared. So it's nice to reduce the code
duplication by merging them together.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This removes the error log message that says
Ethereum peer removal failed ... err="peer not registered"
The error happened because removePeer was called multiple
times: once to disconnect the peer, and another time when the
handler exited. With this change, removePeer now has the sole
purpose of disconnecting the peer. Unregistering happens exactly
once, when the handler exits.
This change grows the static integer buffer in Stream to 32 bytes,
making it possible to decode 256bit integers without allocating a
temporary buffer.
In the recent commit 088da24, Stream struct size decreased from 120
bytes down to 88 bytes. This commit grows the struct to 112 bytes again,
but the size change will not degrade performance because Stream
instances are internally cached in sync.Pool.
name old time/op new time/op delta
DecodeBigInts-8 12.2µs ± 0% 8.6µs ± 4% -29.58% (p=0.000 n=9+10)
name old speed new speed delta
DecodeBigInts-8 230MB/s ± 0% 326MB/s ± 4% +42.04% (p=0.000 n=9+10)
All encoding/decoding operations read the type cache to find the
writer/decoder function responsible for a type. When analyzing CPU
profiles of geth during sync, I found that the use of sync.RWMutex in
cache lookups appears in the profiles. It seems we are running into
CPU cache contention problems when package rlp is heavily used
on all CPU cores during sync.
This change makes it use atomic.Value + a writer lock instead of
sync.RWMutex. In the common case where the typeinfo entry is present in
the cache, we simply fetch the map and lookup the type.
* core/types, miner: create TxWithMinerFee wrapper, add EIP-1559 support to TransactionsByMinerFeeAndNonce
miner: set base fee when creating a new header, handle gas limit, log miner fees
* all: rename to NewTransactionsByPriceAndNonce
* core/types, miner: rename to NewTransactionsByPriceAndNonce + EffectiveTip
miner: activate 1559 for testGenerateBlockAndImport tests
* core,miner: revert naming to TransactionsByPriceAndTime
* core/types/transaction: update effective tip calculation logic
* miner: update aleut to london
* core/types/transaction_test: use correct signer for 1559 txs + add back sender check
* miner/worker: calculate gas target from gas limit
* core, miner: fix block gas limits for 1559
Co-authored-by: Ansgar Dietrichs <adietrichs@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
This change extracts the peer QoS tracking logic from eth/downloader, moving
it into the new package p2p/msgrate. The job of msgrate.Tracker is determining
suitable timeout values and request sizes per peer.
The snap sync scheduler now uses msgrate.Tracker instead of the hard-coded 15s
timeout. This should make the sync work better on network links with high latency.
This commit makes various cleanup changes to rlp.Stream.
* rlp: shrink Stream struct
This removes a lot of unused padding space in Stream by reordering the
fields. The size of Stream changes from 120 bytes to 88 bytes. Stream
instances are internally cached and reused using sync.Pool, so this does
not improve performance.
* rlp: simplify list stack
The list stack kept track of the size of the current list context as
well as the current offset into it. The size had to be stored in the
stack in order to subtract it from the remaining bytes of any enclosing
list in ListEnd. It seems that this can be implemented in a simpler
way: just subtract the size from the enclosing list context in List instead.
This changes the definitions of Ping and Pong, adding an optional field
for the sequence number. This field was previously encoded/decoded using
the "tail" struct tag, but using "optional" is much nicer.
telackey
Péter Szilágyi
YierandCatror
rjl493456442
Martin Holst Swende
Sungwoo Kim
Roman KrasiukandMartin Holst Swende
Marius van der Wijden
ucwong
Patrick O'Grady
Sina MahmoodiandMartin Holst Swende
Darioush Jalali
Chris ZiogasandSina Mahmoodi
halilylmandHalil Yildirim
zhiqiangxu
Marius KjærstadandFelix Lange
raulk
delihiros
lmittmannandFelix Lange
lightclient
Mio
Pascal Marco Caversaccio
Shude Li
meehow
Zachinquarantine
Paul
Ikko Eltociear Ashimine
Seungbae Yu
David Hwang
Andrew Ashikhmin
Joseph Cook
strykerin
Ha DANG
Alex Stokes
qiuhaohao
Håvard Anda Estensen
Oskar Haarklou Veileborg
RichΛrdandFelix Lange
Paweł Bylica
setunapo
Wihan de Beer
6xiaowu9
kumavis
therainisme
ligi
Jolly ZhaoandFelix Lange
protolambda
yihuangandMartin Holst Swende
Ahmet Avci
Marcin SobczakandFelix Lange
Nicolas GotchacandMartin Holst Swende
Saman H. Pasha
Jordan Krage
Roberto Bayardo
Justin Traglia
Sebastian Supreme
DelwengandSina Mahmoodi
s7v7nislandsandseven
Jakub Freebit
Guillaume Ballet
Marius Kjærstad
lmittmannandFelix Lange
Jens W
jinandMartin Holst Swende
Ryan SchneiderandMartin Holst Swende
Mikhail Vazhnov
Ceyhun Onur
TYandty
Alexey ShekhirinandMartin Holst Swende
meowsbits
Leon
omahs
Sebastian Stammler
Boqin@MetaSecureLabs
George Carder
Amir Hossein
pinkiebell
Benjamin Prosnitz
xternetandFelix Lange
aaronbuchwald
Rachel Bousfield
uji
Abirdcfly
ycyraum
0xe3b0c4andFelix Lange
int88andFelix Lange
yong
Tristan-Wilson
Manoj Kumar
Henry
Rithwik Babu
Seungbae Yu
Eval EXEC
Nikhil Suri
henridfandrjl493456442
Philip FanandMartin Holst Swende
BrionandFelix Lange
スパイク
willian.ethandFelix Lange
Andre Patta
Ruohui Wang
zeim839andFelix Lange
Kosuke TaniguchiandFelix Lange
Ivan Aracki
Gustavo Silva
Luozhu
henridfandFelix Lange
Rajaram Gaunker
lwhandGary Rong
Paweł Bylica
Jonathan Le Brun
Ivan Kuznetsov
Harry KalodnerandGary Rong
Eduard S
zhaochonghe
Afr Schoe
Qian BinandMartin Holst Swende
Felipe StrozbergandFelix Lange
Alex Beregszaszi
Mateusz Morusiewicz
ImanSharafandFelix Lange
milesvant
Evgeny Kolyakov
nujabes403
hero5512
Joshua Gutow
tia-99
John Difool
henopied
Nikita Kozhemyakin
Koosha K
Emmanuel T Odeke
Enrique Ortiz
JoeGruffins
Vaibhaw
Eng Zer Jun
Tangui Clairet
Tatsuya Shimoda
John Adler
Nic JansmaandMartin Holst Swende
Zhang Zhuoandrjl493456442
flowerofdreamandYong Yang
alvaroahp11
Jonathan Chappelow
Guifel
沉风
JustusandFelix Lange
Daniel Perez
Yash AtwalandFelix Lange
b1ackd0tandMartin Holst Swende
komika
Brandon Harden
Valentin Trinqué
David Cai
Denver
Shihao XiaandMartin Holst Swende
Di Peng
Mikhail Mikheev
Pantelis Peslis
Greg Myers
xq840622andMarius van der Wijden
Vie
rangzen
sanskarkhareandsanskar khare
Dmitriy Fishman
Sam
peter cresswell
Water
zgfzgf
fomotrader
xwjack
Roman MazalovandFelix Lange
jovijovi
Fredrik Svantes
Arvid Hast
nala
Taeik Lim
divergencetechandArran Schlosberg
Evolution404
Serhat Şevki Dinçer
Anatole
courtier
Jesse TaneandMartin Holst Swende
Joshua Colvin
Ward BradtandMartin Holst Swende
chuwt
Spartyandmrx
XuDon9 Liu AKA Rapper Of CN background diablo & revelations, a man optimistic, negative, silent, active, Taoismandwuff1996
KibGzr
Harry Dutton
Preston Van Loon
Maxim ZhiburtandMartin Holst Swende
Ian Norden
noam-alchemy
z89
Miro
hsyodyssey
Aditya Arora
Sean
Ferran Borreguero
Yihau Chen
Thad Guidry
Pete
Jonathan Verhees
ZachinquarantineandMartin Holst Swende
Alexander Yastrebov
Dmitry Zenovich
baptiste-b-pegasys
Ivan Bogatyy
Pedro Gomes
陈佳
shawnandlxex
@edgararout
Ahyun
Pierre R
ForLinaandliuyaxiong
Li Dongweiandlidongwei
haryu703
piersy
williambermanandWilliam
Nye Liu
Sachin Kumar Singh
Oliver Tale-Yazdi
Afanasii Kurakin
Jeff Wentworth
Nicolas Feignon
Paul-Armand Verhaegen
Mathijs de Bruinandrene
Mike Burr
Eugene Lepeico
Fire Man
Shane Bammel