Commit Graph

675 Commits

Author SHA1 Message Date
William Setzer
72c98dc41f cmd/flags: fix typo in --exitwhensynced flag (#19364)
Corrected error for ExitWhenSyncedFlag, clarifying that the program exits after syncing completes.
2019-04-02 10:40:30 +03:00
Péter Szilágyi
ed34a5e08a
cmd, core, eth: support disabling the concurrent state prefetcher 2019-04-01 11:52:11 +03:00
Péter Szilágyi
86989e3fcd
core: split out detailed trie access metrics from insertion time (#19316)
* core: split out detailed trie access metrics from insertion time

* cmd, core, metrics: support expensive optional metrics
2019-03-25 10:01:18 +02:00
Elad
df488975bd cmd/swarm: dont connect to bootnodes in tests (#19270)
* cmd/swarm: dont connect to bootnodes in tests

* cmd/utils: check for empty string when parsing enode
2019-03-15 06:20:21 +01:00
Péter Szilágyi
91eec1251c
cmd, core, eth, trie: get rid of trie cache generations (#19262)
* cmd, core, eth, trie: get rid of trie cache generations

* core, trie: get rid of remainder of cache gen boilerplate
2019-03-14 15:25:12 +02:00
Péter Szilágyi
054412e335
all: clean up and proerly abstract database access 2019-03-06 13:35:03 +02:00
Felföldi Zsolt
c2003ed63b les, les/flowcontrol: improved request serving and flow control (#18230)
This change

- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
  benchmarks which gives much more consistent results. Until now the
  allowed number of light peers was just a guess which probably contributed
  a lot to the fluctuating quality of available service. Everything related
  to request cost is implemented in a single object, the 'cost tracker'. It
  uses a fixed cost table with a global 'correction factor'. Benchmark code
  is included and can be run at any time to adapt costs to low-level
  implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
  way, with added capabilities: There is now control over bandwidth, which
  allows using the flow control parameters for client prioritization.
  Target utilization over 100 percent is now supported to model concurrent
  request processing. Total serving bandwidth is reduced during block
  processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
  assign priority bandwidth to certain clients and change prioritized
  status even while the client is connected. The new API is meant for
  cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
  control functions through the new API.
2019-02-26 12:32:48 +01:00
Matthew Halpern
fa87929a2f cmd: prefer nil slices over zero-length slices (#19077) 2019-02-15 01:02:11 +02:00
Martin Holst Swende
f48da43bae common/fdlimit: cap on MacOS file limits, fixes #18994 (#19035)
* common/fdlimit: cap on MacOS file limits, fixes #18994

* common/fdlimit: fix Maximum-check to respect OPEN_MAX

* common/fdlimit: return error if OPEN_MAX is exceeded in Raise()

* common/fdlimit: goimports

* common/fdlimit: check value after setting fdlimit

* common/fdlimit: make comment a bit more descriptive

* cmd/utils: make fdlimit happy path a bit cleaner
2019-02-12 12:29:05 +02:00
Péter Szilágyi
d6225ab846
cmd/utils, eth: relinquish GC cache to read cache in archive mode 2019-02-07 14:36:25 +02:00
Martin Holst Swende
43e8efe895
accounts, eth, clique, signer: support for external signer API (#18079)
* accounts, eth, clique: implement external backend + move sighash calc to backend

* signer: implement account_Version on external API

* accounts/external: enable ipc, add copyright

* accounts, internal, signer: formatting

* node: go fmt

* flags: disallow --dev in combo with --externalsigner

* accounts: remove clique-specific signing method, replace with more generic

* accounts, consensus: formatting + fix error in tests

* signer/core: remove (test-) import cycle

* clique: remove unused import

* accounts: remove CliqueHash and avoid dependency on package crypto

* consensus/clique: unduplicate header encoding
2019-02-05 11:23:57 +01:00
Péter Szilágyi
b0ed083ead
cmd, core, params: add support for Goerli 2019-02-04 14:53:12 +02:00
lhendre
d88441025f cmd,eth: 16400 Add an option to stop geth once in sync. WIP for light mode (#17321)
* cmd, eth: Added in the flag to step geth once sync based on input

* cmd, eth: 16400 Add an option to stop geth once in sync.

* cmd: 16400 Add an option to stop geth once in sync. WIP

* cmd/geth/main, les/fletcher: added in light mode support

* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode

* cmd: 16400 Fixed formatting issue and cleaned code

* cmd, eth, les: 16400 Fixed formatting issues

* cmd, eth, les: Performed gofmt to update formatting

* cmd, eth, les: Fixed bugs resulting formatting

* cmd/geth, eth/, les: switched to downloader event

* eth: Fixed styling and gen_config

* eth/: Fix nil error in config file

* cmd/geth: Updated countdown log

* les/fetcher.go: Removed depcreated channel

* eth/downloader.go: Removed deprecated select

* cmd/geth, cmd/utils: Fixed minor issues

* eth: Reverted config files to proper format

* eth: Fixed typo in config file

* cmd/geth, eth/down: Updated code to use header time stamp

* eth/downloader: Changed the time threshold to 10 minutes

* cmd/geth, eth/downloader: Updated downloading event to pass latest header

* cmd/geth: Updated main to use right timer object

* cmd/geth: Removed unused failed event

* cmd/geth: added in correct time field with type assertion

* cmd/geth, cmd/utils: Updated flag to use boolean

* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations

* cmd/geth: Removed unneeded import

* cmd/geth, eth/downloader: fixed event field and suggested changes

* cmd/geth, cmd/utils: Updated flag and linting issue
2019-01-30 08:40:36 +01:00
Anton Evangelatov
21acf0bc8d cmd/utils: allow for multiple influxdb tags (#18520)
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.

This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
2019-01-29 09:14:24 +01:00
Anton Evangelatov
0a454554ae cmd/utils: allow empty bootnodes flag override (#18509) 2019-01-24 13:02:30 +01:00
b00ris
769657060e les: implement ultralight client (#16904)
For more information about this light client mode, read
https://hackmd.io/s/HJy7jjZpm
2019-01-24 12:18:26 +01:00
Kris Shinn
f91312dbdb GraphQL master FF for review (#18445)
* Initial work on a graphql API

* Added receipts, and more transaction fields.

* Finish receipts, add logs

* Add transactionCount to block

* Add types  and .

* Update Block type to be compatible with ethql

* Rename nonce to transactionCount in Account, to be compatible with ethql

* Update transaction, receipt and log to match ethql

* Add  query operator, for a range of blocks

* Added ommerCount to Block

* Add transactionAt and ommerAt to Block

* Added sendRawTransaction mutation

* Add Call and EstimateGas to graphQL API

* Refactored to use hexutil.Bytes instead of HexBytes

* Replace BigNum with hexutil.Big

* Refactor call and estimateGas to use ethapi struct type

* Replace ethgraphql.Address with common.Address

* Replace ethgraphql.Hash with common.Hash

* Converted most quantities to Long instead of Int

* Add support for logs

* Fix bug in runFilter

* Restructured Transaction to work primarily with headers, so uncle data is reported properly

* Add gasPrice API

* Add protocolVersion API

* Add syncing API

* Moved schema into its own source file

* Move some single use args types into anonymous structs

* Add doc-comments

* Fixed backend fetching to use context

* Added (very) basic tests

* Add documentation to the graphql schema

* Fix reversion for formatting of big numbers

* Correct spelling error

* s/BigInt/Long/

* Update common/types.go

* Fixes in response to review

* Fix lint error

* Updated calls on private functions

* Fix typo in graphql.go

* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
2019-01-21 15:38:13 +01:00
Martin Holst Swende
83a9a73b89 cmd/geth, core, eth: implement Constantinople override flag (#18273)
* geth/core/eth: implement constantinople override flag

* les: implemnent constantinople override flag for les clients

* cmd/geth, eth, les: fix typo, move flag to experimentals
2018-12-11 14:19:03 +02:00
Péter Szilágyi
31b3334922
cmd/utils, eth: minor polishes on whitelist code 2018-12-10 14:47:01 +02:00
Ryan Schneider
48b70ecff1
cmd, eth: Add support for --whitelist <blocknum>=<hash>,... flag
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
2018-12-10 14:30:06 +02:00
Péter Szilágyi
cf62bd2e88
cmd/utils: max out the OS file allowance, don't cap to 2K 2018-11-29 12:47:29 +02:00
Ferenc Szabo
76f5f662cc cmd/swarm: FUSE do not require --ipcpath (#18112)
- Have `${DataDir}/bzzd.ipc` as IPC path default.
- Respect the `--datadir` flag.
- Keep only the global `--ipcpath` flag and drop the local `--ipcpath` flag
  as flags might overwrite each other. (Note: before global `--ipcpath`
  was ignored even if it was set)

fixes ethersphere#795
2018-11-23 01:32:34 +01:00
Péter Szilágyi
434dd5bc00
cmd, core, eth, light, trie: add trie read caching layer 2018-11-15 12:22:13 +02:00
Corey Lin
1ff152f3a4 rawdb: remove unused parameter for WritePreimages func (#18059)
* rawdb: remove unused parameter for WritePreimages func and modify a
spelling mistake

* rawdb: update the doc for function WritePreimages
2018-11-09 12:51:07 +02:00
Ryan Schneider
cfcc47529d cmd/utils: fix bug when checking for flag value conflicts (#17803) 2018-10-08 17:08:56 +03:00
Felix Lange
30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
gary rong
d6254f827b all: protect self-mined block during reorg (#17656) 2018-09-20 15:09:30 +03:00
Guillaume Ballet
da29332c5f core/vm: add switches to select evm+ewasm interpreters (#17687)
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
2018-09-20 10:44:35 +03:00
TColl
0e32989a08 cmd/utils: typos in {Miner, MinerLegacy}GasPriceFlag (#17588) 2018-09-10 15:22:34 +03:00
b00ris
8711e2b636 whisper: add light mode check to handshake (#16725) 2018-09-05 10:57:45 +02:00
Péter Szilágyi
e8f229b82e
cmd, core, eth, miner, params: configurable gas floor and ceil 2018-08-29 12:40:12 +03:00
gary rong
c1c003e4ff consensus, miner: stale block mining support (#17506)
* consensus, miner: stale block supporting

* consensus, miner: refactor seal signature

* cmd, consensus, eth: add miner noverify flag

* cmd, consensus, miner: polish
2018-08-28 16:59:05 +03:00
Péter Szilágyi
92381ee009
cmd, eth: clean up miner startup API, drop noop config field 2018-08-23 14:09:45 +03:00
gary rong
af85d8e2b3 cmd, eth: apply default miner recommit setting (#17479) 2018-08-22 09:47:50 +03:00
Péter Szilágyi
e0d0e64ce2
cmd, core, miner: add --txpool.locals and priority mining 2018-08-22 09:43:57 +03:00
gary rong
b2c644ffb5 cmd, eth, miner: make recommit configurable (#17444)
* cmd, eth, miner: make recommit configurable

* cmd, eth, les, miner: polish a bit

* miner: filter duplicate sealing work

* cmd: remove uncessary conversion

* miner: avoid microptimization in favor of cleaner code
2018-08-21 22:56:54 +03:00
Péter Szilágyi
2a17fe2561
cmd: polish miner flags, deprecate olds, add upgrade path 2018-08-15 11:41:23 +03:00
Péter Szilágyi
f0998415ba
cmd, consensus/ethash, eth: miner push notifications 2018-08-10 09:06:59 +03:00
Anton Evangelatov
a5d5609e38 build: rename swarm deb package to ethereum-swarm; change swarm deb version from 1.8.x to 0.3.x (#16988)
* build: add support for different package and binary names

* build: bump up copyright date

* build: change default PackageName to empty string

* build, internal, swarm: enhance build/release process

* build: hack ethereum-swarm as a "depends" in deb package

* build/ci: remove redundant variables

* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;

* internal: remove VERSION() method which reads VERSION file

* build: fix VersionFilePath to Version

* Makefile: remove clean_go_build_cache.sh until it works

* Makefile: revert removal of clean_go_build_cache.sh
2018-07-30 11:56:40 +03:00
a e r t h
021d6fbbbb cmd: prevent accidental invalid commands (#17248)
* cmd: stop parsing bootnodes if one is invalid

* cmd/geth: require valid command as argument (or no arg)
2018-07-26 13:57:20 +03:00
Sarlor
6c412e313c cmd/utils: fix comment typo (#17249)
cmd: Comment error
2018-07-26 10:59:05 +03:00
Kurkó Mihály
a9835c1816 cmd, dashboard, log: log collection and exploration (#17097)
* cmd, dashboard, internal, log, node: logging feature

* cmd, dashboard, internal, log: requested changes

* dashboard, vendor: gofmt, govendor, use vendored file watcher

* dashboard, log: gofmt -s -w, goimports

* dashboard, log: gosimple
2018-07-11 10:59:04 +03:00
Wenbiao Zheng
2eedbe799f cmd: typo fixed, isntance -> instance (#17149) 2018-07-09 17:34:59 +03:00
Anton Evangelatov
1990c9e621 cmd/geth: export metrics to InfluxDB (#16979)
* cmd/geth: add flags for metrics export

* cmd/geth: update usage fields for metrics flags

* metrics/influxdb: update reporter logger to adhere to geth logging convention
2018-07-02 15:51:02 +03:00
Jeremy Schlatter
3fb5f3ae11 cmd/utils: fix NetworkId default when -dev is set (#16833)
Prior to this change, when geth was started with `geth -dev -rpc`,
it would report a network id of `1` in response to the `net_version` RPC
request. But the actual network id it used to verify transactions
was `1337`.

This change causes geth instead respond with `1337` to the `net_version`
RPC when geth is started with `geth -dev -rpc`.
2018-06-14 12:31:31 +03:00
Péter Szilágyi
6cf0ab38bd
core/rawdb: separate raw database access to own package (#16666) 2018-05-07 14:35:06 +03:00
Martin Klepsch
852aa143ac cmd/utils: point users to --syncmode under DEPRECATED (#16572)
Indicate that --light and --fast options are replaced by --syncmode
2018-04-27 12:32:06 +03:00
Zhenguo Niu
661f5f3dac cmd/utils: fix help template issue for subcommands (#16351) 2018-04-18 01:50:25 +02:00
Guillaume Ballet
cf799e5eaa
whisper: switch all remaining components from v5 to v6 2018-03-26 16:36:14 +02:00
Péter Szilágyi
495bdb0c71
cmd: export preimages in RLP, support GZIP, uniform with block export 2018-03-26 14:08:01 +03:00
Guillaume Ballet
3d013c1939 whisper: some components are still using v5, switch to v6 2018-03-22 15:48:52 +01:00
Felföldi Zsolt
1488fdaf19 cmd/utils: fix maxpeers vs lightpeers logic (#16125) 2018-03-09 11:55:03 +02:00
Kurkó Mihály
704840a8ad cmd, dashboard: use webpack dev server, remove custom assets (#16263)
* cmd, dashboard: remove custom assets, webpack dev server

* dashboard: yarn commands, small fixes
2018-03-08 10:22:21 +02:00
Martin Holst Swende
478143d69a utils: fix #16138 by checking if vhosts flag is set (#16141)
* utils: fix #16138 by checking if vhosts flag is set

* utils,node: fix defaults for rpcvhosts

* node,utils: address review concerns
2018-03-05 13:02:32 +02:00
Péter Szilágyi
01507d9b9d
cmd, console: support all termination signals 2018-02-21 15:23:10 +02:00
Martin Holst Swende
589b603a9b rpc: dns rebind protection (#15962)
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks

* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d

* rpc: add wildcard support for rpcallowedhosts + go fmt

* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check

* http, rpc, utils: make vhosts into map, address review concerns

* node: change log messages to use geth standard (not sprintf)

* rpc: fix spelling
2018-02-12 14:52:07 +02:00
Péter Szilágyi
55599ee95d core, trie: intermediate mempool between trie and database (#15857)
This commit reduces database I/O by not writing every state trie to disk.
2018-02-05 17:40:32 +01:00
Felföldi Zsolt
c3f238dd53 les: limit LES peer count and improve peer configuration logic (#16010)
* les: limit number of LES connections

* eth, cmd/utils: light vs max peer configuration logic
2018-02-05 15:41:53 +02:00
Martin Holst Swende
ec28a58cc1
utils: fix #16006 by not lowering OS ulimit 2018-02-02 09:33:33 +01:00
Felföldi Zsolt
c335821479 cmd, params: update discovery v5 bootnodes (#15954) 2018-01-25 12:25:00 +02:00
Felföldi Zsolt
92580d69d3 p2p, p2p/discover, p2p/discv5: implement UDP port sharing (#15200)
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.

DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
2018-01-22 13:38:34 +01:00
Kurkó Mihály
938cf4528a dashboard: deep state update, version in footer (#15837)
* dashboard: footer, deep state update

* dashboard: resolve asset path

* dashboard: remove bundle.js

* dashboard: prevent state update on every reconnection

* dashboard: fix linter issue

* dashboard, cmd: minor UI fix, include commit hash

* remove geth binary

* dashboard: gitCommit renamed to commit

* dashboard: move the geth version to the right, make commit optional

* dashboard: commit limited to 7 characters

* dashboard: limit commit length on client side

* dashboard: run go generate
2018-01-15 11:20:00 +02:00
Ricardo Domingos
56152b31ac common/fdlimit: Move fdlimit files to separate package (#15850)
* common/fdlimit: Move fdlimit files to separate package

When go-ethereum is used as a library the calling program need to set
the FD limit.

This commit extract fdlimit files to a separate package so it can be
used outside of go-ethereum.

* common/fdlimit: Remove FdLimit from functions signature

* common/fdlimit: Rename fdlimit functions
2018-01-11 22:55:21 +02:00
Evangelos Pappas
7a59a9380e cmd/utils: handle git commit a bit safer for user specified strings (#15790)
* cmd/utils/flags.go: Applying a String len guard for the gitCommit param of the NewApp()

* cmd/utils: remove redundant clause in if condition
2018-01-03 18:18:53 +02:00
Péter Szilágyi
6f69cdd109
all: switch gas limits from big.Int to uint64 2018-01-03 14:45:35 +02:00
lash
14852810b4 cmd/utils: add check on fd hard limit, skip test if below target (#15684)
* cmd/utils: Add check on hard limit, skip test if below target

* cmd/utils: Cross platform compatible fd limit test

* cmd/utils: Remove syscall.Rlimit in test

* cmd/utils: comment fd utility method
2017-12-21 15:30:44 +02:00
Péter Szilágyi
46e5583993 cmd/utils, eth: init etherbase from within eth (#15528) 2017-12-09 23:42:23 +01:00
Maximilian Meister
62dc530773 cmd/utils: bootstrap nodes in config file were not respected
Signed-off-by: Maximilian Meister <mmeister@suse.de>
2017-11-26 12:42:51 +01:00
Paul Litvak
e4c9fd29a3 cmd/utils: disallow --lightserv in light mode (#15514)
* Disallow --lightserv in light mode

* Reformatted

* cmd/utils: reduce nesting levels a bit
2017-11-24 17:07:21 +02:00
gary rong
f14047dae5 cmd, consensus, eth: split ethash related config to it own (#15520)
* cmd, consensus, eth: split ethash related config to it own

* eth, consensus: minor polish

* eth, consenus, console: compress pow testing config field to single one

* consensus, eth: document pow mode
2017-11-24 16:10:27 +02:00
Kurkó Mihály
ba62215d9e cmd, dashboard: dashboard using React, Material-UI, Recharts (#15393)
* cmd, dashboard: dashboard using React, Material-UI, Recharts

* cmd, dashboard, metrics: initial proof of concept dashboard

* dashboard: delete blobs

* dashboard: gofmt -s -w .

* dashboard: minor text and code polishes
2017-11-14 19:34:00 +02:00
Péter Szilágyi
6d6a5a9337 cmd, consensus, core, miner: instatx clique for --dev (#15323)
* cmd, consensus, core, miner: instatx clique for --dev

* cmd, consensus, clique: support configurable --dev block times

* cmd, core: allow --dev to use persistent storage too
2017-10-24 13:40:42 +03:00
Péter Szilágyi
35767dfd0c
cmd, eth: separate out FakePeer for future reuse 2017-10-10 15:52:11 +03:00
ayeowch
f3c9585f2e
cmd/geth: fix --password typo 2017-09-27 10:28:26 +10:00
Felix Lange
10181b57a9 core, eth/downloader: commit block data using batches (#15115)
* ethdb: add Putter interface and Has method

* ethdb: improve docs and add IdealBatchSize

* ethdb: remove memory batch lock

Batches are not safe for concurrent use.

* core: use ethdb.Putter for Write* functions

This covers the easy cases.

* core/state: simplify StateSync

* trie: optimize local node check

* ethdb: add ValueSize to Batch

* core: optimize HasHeader check

This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.

* core: write fast sync block data in batches

Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.

* eth/downloader: commit larger state batches

Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.

* core: optimize HasBlock check

This avoids a random database read to get the number.

* core: use numberCache in HasHeader

numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.

* core: write imported block data using a batch

Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.

This commit also removes posting of logs when a forked block is imported.

* core: fix DB write error handling

* ethdb: use RLock for Has

* core: fix HasBlock comment
2017-09-09 19:03:07 +03:00
Péter Szilágyi
b0ca1b67ce
eth: use maxpeers from p2p layer instead of extra config 2017-09-05 19:18:28 +03:00
Oli Bye
ebf41d16a0 cmd/geth: fix --nousb typo (#15040) 2017-08-25 16:54:36 +03:00
Miya Chen
bf1e263128 core, light: send chain events using event.Feed (#14865) 2017-08-18 12:58:36 +02:00
Péter Szilágyi
4a260dc1f2
cmd: add makecache cmd, use caches during import cmd 2017-08-03 18:39:34 +02:00
Péter Szilágyi
3d32690b54 cmd, core, eth: journal local transactions to disk (#14784)
* core: reduce txpool event loop goroutines and sync structs

* cmd, core, eth: journal local transactions to disk

* core: journal replacement pending transactions too

* core: separate transaction journal from pool
2017-07-28 15:09:39 +02:00
Péter Szilágyi
5e38f7a664
cmd, core: add --txpool.nolocals to disable local price exemptions 2017-07-05 17:06:05 +03:00
Bas van Kervel
7a11e86442 whisper: move flags from whisper package to utils 2017-06-21 10:49:14 +02:00
Bas van Kervel
b58a501673 whisperv5: integrate whisper and add whisper RPC simulator 2017-06-15 11:53:15 +02:00
Péter Szilágyi
08959bbc70
cmd, core, eth: configurable txpool parameters 2017-05-29 11:29:46 +03:00
Bas van Kervel
a346aedb90
cmd/geth: reorganise help section for new cli flag handling 2017-05-25 09:15:51 +02:00
Péter Szilágyi
a2f23ca9b1 cmd, core, eth, miner: remove txpool gas price limits (#14442) 2017-05-16 21:07:27 +02:00
Péter Szilágyi
3b3989de6a
cmd, node: support different bootnodes, fix default light port 2017-05-10 17:51:52 +03:00
Péter Szilágyi
ff2c966e7f Merge pull request #14418 from karalabe/rinkeby-flag
cmd, core, params: add --rinkeby flag for fast connectivity
2017-05-04 13:54:02 +03:00
Péter Szilágyi
d51a9fd6b7
cmd, core, params: add --rinkeby flag for fast connectivity 2017-05-04 12:36:20 +03:00
Bas van Kervel
502a2bd69f
cmd/geth: reorganise console/attach commands/flags 2017-05-03 14:33:07 +02:00
Péter Szilágyi
181a3309df
cmd/geth, cmd/utils: init/removedb on light/full dbs simultaneously 2017-05-03 13:35:47 +03:00
Bas van Kervel
f6c0f76cc5
cmd/geth: reorganise account/wallet command/flags 2017-04-28 14:01:54 +02:00
gluk256
f9be9a2302 whisper: switching to v5 + minor refactoring (#14387) 2017-04-28 11:57:15 +02:00
Péter Szilágyi
e61035c5a3
cmd, eth, les, mobile: make networkid uint64 everywhere 2017-04-25 14:53:50 +03:00
Péter Szilágyi
6430e672c9
cmd, node: add --nosub and node.Config.NoUSB to disable hw wallets 2017-04-20 14:01:51 +03:00
bas-vk
5e29f4be93 cmd/utils, node: remove unused solc references and improve RPC config (#14324)
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
2017-04-12 23:04:14 +02:00
Felix Lange
30d706c35e cmd/geth: add --config file flag (#13875)
* p2p/discover, p2p/discv5: add marshaling methods to Node

* p2p/netutil: make Netlist decodable from TOML

* common/math: encode nil HexOrDecimal256 as 0x0

* cmd/geth: add --config file flag

* cmd/geth: add missing license header

* eth: prettify Config again, fix tests

* eth: use gasprice.Config instead of duplicating its fields

* eth/gasprice: hide nil default from dumpconfig output

* cmd/geth: hide genesis block in dumpconfig output

* node: make tests compile

* console: fix tests

* cmd/geth: make TOML keys look exactly like Go struct fields

* p2p: use discovery by default

This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.

* cmd/geth: make ethstats URL settable through config file

* cmd/faucet: fix configuration

* cmd/geth: dedup attach tests

* eth: add comment for DefaultConfig

* eth: pass downloader.SyncMode in Config

This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.

* cmd/utils: remove jitvm flags

* cmd/utils: make mutually exclusive flag error prettier

It now reads:

   Fatal: flags --dev, --testnet can't be used at the same time

* p2p: fix typo

* node: add DefaultConfig, use it for geth

* mobile: add missing NoDiscovery option

* cmd/utils: drop MakeNode

This exposed a couple of places that needed to be updated to use
node.DefaultConfig.

* node: fix typo

* eth: make fast sync the default mode

* cmd/utils: remove IPCApiFlag (unused)

* node: remove default IPC path

Set it in the frontends instead.

* cmd/geth: add --syncmode

* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive

* cmd/utils: don't enable WS, HTTP when setting addr

* cmd/utils: fix --identity
2017-04-12 17:27:23 +03:00
Felföldi Zsolt
9aca9e6deb cmd, les, eth, eth/gasprice: using new gas price oracle (#13853)
* cmd, les, eth, eth/gasprice: using new gas price oracle

* eth/gasprice: renamed source file

* eth/gasprice: added security checks for gpo params

* eth/gasprice: fixed naming issues

* eth/gasprice: max limit, maxEmpty
2017-04-06 17:20:42 +03:00
Péter Szilágyi
09777952ee core, consensus: pluggable consensus engines (#3817)
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
2017-04-05 00:16:29 +02:00
Felix Lange
37dd9086ec core: refactor genesis handling
This commit solves several issues concerning the genesis block:

* Genesis/ChainConfig loading was handled by cmd/geth code. This left
  library users in the cold. They could specify a JSON-encoded
  string and overwrite the config, but didn't get any of the additional
  checks performed by geth.
* Decoding and writing of genesis JSON was conflated in
  WriteGenesisBlock. This made it a lot harder to embed the genesis
  block into the forthcoming config file loader. This commit changes
  things so there is a single Genesis type that represents genesis
  blocks. All uses of Write*Genesis* are changed to use the new type
  instead.
* If the chain config supplied by the user was incompatible with the
  current chain (i.e. the chain had already advanced beyond a scheduled
  fork), it got overwritten. This is not an issue in practice because
  previous forks have always had the highest total difficulty. It might
  matter in the future though. The new code reverts the local chain to
  the point of the fork when upgrading configuration.

The change to genesis block data removes compression library
dependencies from package core.
2017-03-23 15:58:43 +01:00
Péter Szilágyi
b7d93500f1 all: finish integrating Go ethash, delete C++ vendor 2017-03-09 15:50:14 +01:00
Péter Szilágyi
023670f6ba cmd, eth, les, node, pow: disk caching and progress reports 2017-03-09 15:50:14 +01:00
Péter Szilágyi
567d41d936 all: swap out the C++ ethash to the pure Go one (mining todo) 2017-03-09 15:50:14 +01:00
Martin Holst Swende
544247c918 * cmd/geth: add --nocompaction flag + multiple import files
* main,import: Add --nocompaction flag + multiple import files

* geth/import: documentation

* import: Added more info to err message

* fix :P
2017-03-08 13:26:19 +02:00
Péter Szilágyi
9184249b39 Logger updates 3 (#3730)
* accounts, cmd, eth, ethdb: port logs over to new system

* ethdb: drop concept of cache distribution between dbs

* eth: fix some log nitpicks to make them nicer
2017-03-02 14:06:16 +01:00
Jeffrey Wilcke
7ff75ac2f2 cmd/utils, core, params: fork all teh things for dev mode (#3697) 2017-02-28 23:18:13 +01:00
Felix Lange
5c8fe28b72 common: move big integer math to common/math (#3699)
* common: remove CurrencyToString

Move denomination values to params instead.

* common: delete dead code

* common: move big integer operations to common/math

This commit consolidates all big integer operations into common/math and
adds tests and documentation.

There should be no change in semantics for BigPow, BigMin, BigMax, S256,
U256, Exp and their behaviour is now locked in by tests.

The BigD, BytesToBig and Bytes2Big functions don't provide additional
value, all uses are replaced by new(big.Int).SetBytes().

BigToBytes is now called PaddedBigBytes, its minimum output size
parameter is now specified as the number of bytes instead of bits. The
single use of this function is in the EVM's MSTORE instruction.

Big and String2Big are replaced by ParseBig, which is slightly stricter.
It previously accepted leading zeros for hexadecimal inputs but treated
decimal inputs as octal if a leading zero digit was present.

ParseUint64 is used in places where String2Big was used to decode a
uint64.

The new functions MustParseBig and MustParseUint64 are now used in many
places where parsing errors were previously ignored.

* common: delete unused big integer variables

* accounts/abi: replace uses of BytesToBig with use of encoding/binary

* common: remove BytesToBig

* common: remove Bytes2Big

* common: remove BigTrue

* cmd/utils: add BigFlag and use it for error-checked integer flags

While here, remove environment variable processing for DirectoryFlag
because we don't use it.

* core: add missing error checks in genesis block parser

* common: remove String2Big

* cmd/evm: use utils.BigFlag

* common/math: check for 256 bit overflow in ParseBig

This is supposed to prevent silent overflow/truncation of values in the
genesis block JSON. Without this check, a genesis block that set a
balance larger than 256 bits would lead to weird behaviour in the VM.

* cmd/utils: fixup import
2017-02-26 22:21:51 +01:00
Péter Szilágyi
1ca20a2697
cmd, whisper/mailserver: revert to utils.Fatalf 2017-02-23 12:16:46 +02:00
Péter Szilágyi
23a5d64fd0
accounts, cmd: port packages over to the new logging system 2017-02-23 12:16:46 +02:00
Péter Szilágyi
d4fd06c3dc
all: blidly swap out glog to our log15, logs need rework 2017-02-23 12:16:44 +02:00
Péter Szilágyi
fad5eb0a87
accounts, cmd, eth, internal, miner, node: wallets and HD APIs 2017-02-13 14:00:07 +02:00
Péter Szilágyi
833e4d1319
accounts, cmd, eth, internal, mobile, node: split account backends 2017-02-13 14:00:02 +02:00
Zsolt Felfoldi
a390ca5f30 les, cmd/util: disable topic discovery with --nodiscover 2017-01-27 02:52:45 +01:00
Péter Szilágyi
d63752ef4d Merge pull request #3579 from bas-vk/natspec
cmd,eth,les,internal: remove natspec support
2017-01-17 14:38:57 +02:00
Nick Johnson
17d92233d9 cmd/geth, core: add support for recording SHA3 preimages (#3543) 2017-01-17 12:19:50 +01:00
Bas van Kervel
54a65e6d87
cmd,eth,les,internal: remove natspec support 2017-01-17 12:13:50 +01:00
Bas van Kervel
745a3adebd
core: remove support for Olympic network 2017-01-12 09:50:54 +01:00
Péter Szilágyi
b52fde7cf7 Merge pull request #3546 from fjl/deps-update
vendor: update dependencies
2017-01-11 12:14:08 +02:00
Felix Lange
d78f9b834a vendor: update all dependencies except Azure SDK
The Azure SDK doesn't support Go 1.5 anymore. We can't upgrade it until
Go 1.8 comes out.
2017-01-10 22:33:24 +01:00
Felix Lange
445deb7470 cmd/utils: fix comma-separated --bootnodes 2017-01-10 21:13:43 +01:00
Felix Lange
b9b3efb09f all: fix ineffectual assignments and remove uses of crypto.Sha3
go get github.com/gordonklaus/ineffassign
ineffassign .
2017-01-09 16:24:42 +01:00
Felix Lange
13e3b2f433 logger, pow/dagger, pow/ezp: delete dead code 2017-01-06 18:18:07 +01:00
Felix Lange
f2da6581ba all: fix issues reported by honnef.co/go/simple/cmd/gosimple 2017-01-06 18:18:07 +01:00
Péter Szilágyi
8f9daaa3ba Merge pull request #3518 from fjl/ethclient-dependency-cleanup
core/types: dependency cleanup
2017-01-06 15:42:03 +02:00
Felix Lange
b9683d3748 params: avoid importing p2p/discover for bootnodes
params is imported by leaf-ish library packages and should not pull in
the p2p stack.
2017-01-06 14:15:21 +01:00
Péter Szilágyi
bbce726c8a Merge pull request #3515 from bas-vk/exportropsten
core,cmd/utils: bugfix for ropsten dump imports
2017-01-05 12:54:45 +02:00
Péter Szilágyi
06b381d1c9 cmd/utils: disallow --fakepow for live operation (#3512) 2017-01-05 11:40:56 +01:00
Bas van Kervel
a1798a8188
core,cmd/utils: bugfix for ropsten dump imports 2017-01-05 11:31:57 +01:00
Péter Szilágyi
2ce30382d9
cmd/utils, eth, les: bubble --fakepow flag into eth/les too 2017-01-04 10:42:41 +02:00
Nick Johnson
9ba9fe818d cmd/utils, eth: Add gzip support for chain dump and restore 2016-12-14 08:59:55 +00:00
Luca Zeug
3363a1c227 cmd/utils: update helpscreen's testnet description (#3377) 2016-11-29 16:23:11 +02:00
Péter Szilágyi
7267f796e6
cmd: drop DAO related choice flags since ETC diverged 2016-11-29 15:50:27 +02:00
Viktor Trón
e949a2ed2f cmd/bzzd: swarm daemon fixes (#3359)
* cmd/bzzd: add missing p2p/discovery flags
* cmd/bzzd: fix two bugs crashing bzzd if bootnodes flag given
* cmd/bzzd: make no swap default, renamed flag bzznoswap->bzzswap
* internal/web3ext: correct methods for bzz IPC module
* cmd/bzzd: ethapi param not mandatory. Warning if no blockchain
* cmd/bzzd: correct default IPC modules in help string
* cmd/utils: fix help description for networkId - add Ropsten
* cmd/bzz, swarm/api, swarm/network: add swarm networkId flag
* cmd/bzzd: change nosync flag to sync and BootTFlag
2016-11-28 13:29:33 +01:00
Péter Szilágyi
4c8c5e2f74 cmd, ethstats, les, mobile, params: native netstats (#3336) 2016-11-25 16:55:06 +01:00
Felix Lange
d1a95c643e Merge pull request #3325 from fjl/p2p-netrestrict
Prevent relay of invalid IPs, add --netrestrict
2016-11-25 13:59:18 +01:00
Jeffrey Wilcke
6cc87a31c6 cmd/utils, internal/web3ext: removed httpGet 2016-11-25 12:31:06 +01:00
Felix Lange
586f10ecb1 cmd/utils, VERSION: 1.5.4 unstable 2016-11-24 23:06:25 +01:00
Felix Lange
978737f5d5 cmd/utils: 1.5.3 stable 2016-11-24 23:03:13 +01:00
Jeffrey Wilcke
a8ca75738a core: implemented new ropsten testnet 2016-11-23 09:34:01 +01:00
Jeffrey Wilcke
aad4890082 cmd/geth, core, light, mobile: removed state account StartingNonce
All account's nonce start at 0.
2016-11-23 09:34:01 +01:00
Felix Lange
e5edd3b983 cmd/bootnode, cmd/geth, cmd/bzzd: add --netrestrict 2016-11-22 22:21:18 +01:00
Nick Johnson
e1c1fce92c cmd/utils, VERSION: 1.5.3 unstable (#3306) 2016-11-18 12:33:47 +01:00
Nick Johnson
9b95112a2d cmd/utils: Set version string to stable (#3304) 2016-11-18 11:57:48 +01:00
Felix Lange
20eab80189 cmd/utils, VERSION: 1.5.2 unstable 2016-11-17 14:40:32 +01:00
Jeffrey Wilcke
b81baf5423 utils: bump stable 2016-11-16 10:46:22 +01:00
Péter Szilágyi
64359c9417 cmd/utils, mobile, params: set the correct field on testnet EIP 155 (#3272) 2016-11-16 00:46:40 +01:00
Felix Lange
a96d6c68e2 cmd/utils: remove jit flag handling (#3273)
The jit config options are not handled, but random selection still took
place, printing confusing messages.
2016-11-15 22:20:18 +01:00
Jeffrey Wilcke
fd27393df3 utils: unstable 1.5.1 2016-11-15 00:40:40 +01:00
Jeffrey Wilcke
233950da40 utils: stable 1.5.0 2016-11-15 00:39:12 +01:00
Jeffrey Wilcke
a672eae3d1 core, core/types: refactored tx chain id checking (#3257)
* core, core/types: refactored tx chain id checking

Refactored explicit chain id checking in to the Sender deriviation method

* cmd/utils, params: define chain ids
2016-11-14 21:37:13 +01:00
Jeffrey Wilcke
7a6c6ec946 cmd/utils, params: define chain ids 2016-11-14 17:23:39 +01:00
Péter Szilágyi
dfe79cc784
cmd/utils, mobile: place bootnodes in LGPL packages 2016-11-14 18:00:14 +02:00
Péter Szilágyi
4a439c2359
mobile: port wrappers to EIP155 and EIP158 fork 2016-11-14 18:00:14 +02:00
Péter Szilágyi
b61f48e5aa
cmd, mobile, node, p2p: surface the discovery V5 bootnodes 2016-11-14 18:00:14 +02:00
Péter Szilágyi
de4b39a1a3
cmd/utils, mobile: update to reprice HF and light client 2016-11-14 17:56:58 +02:00
Péter Szilágyi
178da7c6a9
mobile: initial wrappers for mobile support 2016-11-14 17:56:58 +02:00
Jeffrey Wilcke
ae33883c2f cmd/utils: set temporary HF number 2016-11-13 15:50:32 +01:00
Jeffrey Wilcke
4dca5d4db7 core/types, params: EIP#155 2016-11-13 14:55:30 +01:00
Jeffrey Wilcke
445feaeef5 core, core/state, trie: EIP158, reprice & skip empty account write
This commit implements EIP158 part 1, 2, 3 & 4

1. If an account is empty it's no longer written to the trie. An empty
  account is defined as (balance=0, nonce=0, storage=0, code=0).
2. Delete an empty account if it's touched
3. An empty account is redefined as either non-existent or empty.
4. Zero value calls and zero value suicides no longer consume the 25k
  reation costs.

params: moved core/config to params

Signed-off-by: Jeffrey Wilcke <jeffrey@ethereum.org>
2016-11-13 10:44:04 +01:00
Felix Lange
b8bd9a71c8 all: update license information 2016-11-09 02:51:34 +01:00
Zsolt Felfoldi
49da42983a p2p/discv5: added new topic discovery package 2016-11-09 02:12:53 +01:00
zsfelfoldi
7db7109a5b cmd, eth: added light client and light server modes 2016-11-09 02:12:53 +01:00
Péter Szilágyi
63d293cdbe Merge pull request #3195 from karalabe/fix-testnet-fastsync
cmd/utils, core, params: explicitly pick reprice fork for fast sync
2016-10-29 17:21:26 +03:00
Péter Szilágyi
f0dbec0c93
cmd, params: only set default fork configs for test and mainnet 2016-10-29 17:07:07 +03:00
gluk256
79789af2e7 whisper: project restructured, version 5 introduced (#3022)
whisper: project restructured, version 5 introduced

This commits adds a draft version of the new shh v5 protocol.
The new version is not on by default, --shh still selects version 2.
2016-10-29 14:11:37 +02:00
Péter Szilágyi
8639b0fae9
cmd/utils, core, params: explicitly pick reprice fork for fast sync 2016-10-29 12:10:00 +03:00
Péter Szilágyi
289b30715d Godeps, vendor: convert dependency management to trash (#3198)
This commit converts the dependency management from Godeps to the vendor
folder, also switching the tool from godep to trash. Since the upstream tool
lacks a few features proposed via a few PRs, until those PRs are merged in
(if), use github.com/karalabe/trash.

You can update dependencies via trash --update.

All dependencies have been updated to their latest version.

Parts of the build system are reworked to drop old notions of Godeps and
invocation of the go vet command so that it doesn't run against the vendor
folder, as that will just blow up during vetting.

The conversion drops OpenCL (and hence GPU mining support) from ethash and our
codebase. The short reasoning is that there's noone to maintain and having
opencl libs in our deps messes up builds as go install ./... tries to build
them, failing with unsatisfied link errors for the C OpenCL deps.

golang.org/x/net/context is not vendored in. We expect it to be fetched by the
user (i.e. using go get). To keep ci.go builds reproducible the package is
"vendored" in build/_vendor.
2016-10-28 19:05:01 +02:00
Péter Szilágyi
4f46bd19d0
cmd, core/state: allow configurable trie cache generations 2016-10-19 14:55:13 +03:00
Jeffrey Wilcke
64af2aafda core, core/vm: added gas price variance table
This implements 1b & 1c of EIP150 by adding a new GasTable which must be
returned from the RuleSet config method. This table is used to determine
the gas prices for the current epoch.

Please note that when the CreateBySuicide gas price is set it is assumed
that we're in the new epoch phase.

In addition this PR will serve as temporary basis while refactorisation
in being done in the EVM64 PR, which will substentially overhaul the gas
price code.
2016-10-14 18:09:17 +02:00
Felix Lange
44bc2e80dd Merge pull request #2914 from fjl/node-coinhabit
cmd/utils, node: make datadir reusable for bzzd
2016-09-29 14:24:37 +02:00
Felix Lange
b04219fdbb cmd/utils: don't check for stderr redirect on windows
The redirect check did not work on Go 1.6 and below because Stat
returned an error for stdout and stderr. In Go 1.7 Stat works on stdout
but doesn't return anything meaningful, causing cmd/geth test failures
because the message is printed to stderr only. Fix it by printing to
stdout only.
2016-09-26 17:35:19 +02:00
Felix Lange
b42a5b118f common, node: move datadir defaults into package node 2016-09-16 15:24:31 +02:00
Felix Lange
eeb322ae64 node: ensure datadir can be co-inhabited by different instances
This change ensures that nodes started with different Name but same
DataDir values don't use the same nodekey and IPC socket.
2016-09-16 15:24:31 +02:00
Péter Szilágyi
30860491ba cmd, eth: drop the blockchain version from cli/eth configs 2016-09-15 14:09:47 +03:00
Felix Lange
6b727c0440 cmd/evm, cmd/geth, cmd/utils: move version handling to cmd/utils 2016-09-05 13:24:11 +02:00
Felix Lange
1d7d1a3499 contracts/release: move package release to contracts/
This change also deletes generator.go, moving the only interesting line
in it into release.go. The binding has been regenerated with abigen from
develop and solc v0.3.6.
2016-08-29 19:25:05 +02:00
Jeffrey Wilcke
5b44a819d3 cmd/utils: removed DAO oppose / support message 2016-08-21 23:55:53 +02:00
Felix Lange
312263c7d9 cmd/utils, node: create account manager in package node
The account manager was previously created by packge cmd/utils as part
of flag processing and then passed down into eth.Ethereum through its
config struct. Since we are starting to create nodes which do not have
eth.Ethereum as a registered service, the code was rearranged to
register the account manager as its own service. Making it a service is
ugly though and it doesn't really fix the root cause: creating nodes
without eth.Ethereum requires duplicating lots of code.

This commit splits utils.MakeSystemNode into three functions, making
creation of other node/service configurations easier. It also moves the
account manager into Node so it can be used by those configurations
without requiring package eth.
2016-08-17 17:39:03 +02:00
Felix Lange
91b7690428 rpc: add new client, use it everywhere
The new client implementation supports concurrent requests,
subscriptions and replaces the various ad hoc RPC clients
throughout go-ethereum.
2016-07-22 23:21:27 +02:00
Péter Szilágyi
993b412160 cmd/utils, eth: display the user's current fork, minor text tweak 2016-07-16 12:38:37 +03:00
Péter Szilágyi
2c2e389b77 cmd, core, eth, miner, params, tests: finalize the DAO fork 2016-07-15 16:52:55 +03:00
Péter Szilágyi
a87089fd2d cmd, core, miner: add extradata validation to consensus rules 2016-07-15 16:52:55 +03:00
Péter Szilágyi
6060e098c9 cmd, core, eth, params: implement flags to control dao fork blocks 2016-07-15 16:52:55 +03:00
Péter Szilágyi
1e50f5dd28 Merge pull request #2159 from zsfelfoldi/light-backend
eth: separate common and full node-specific API and backend service
2016-06-30 12:57:50 +03:00
Péter Szilágyi
6362a9d610 Revert "test, cmd/evm, core, core/vm: illegal code hash implementation"
This reverts commit 7a5b571c67.
2016-06-29 11:44:51 +03:00
Péter Szilágyi
d55fc35df1 Revert "core: add voting and result tracking for the dao soft-fork"
This reverts commit c4de28938f.
2016-06-29 11:44:40 +03:00
Péter Szilágyi
67e9d33486 Revert "core: update DAO soft-fork number, clean up the code"
This reverts commit ba784bdf36.
2016-06-29 11:44:29 +03:00
Péter Szilágyi
ba784bdf36 core: update DAO soft-fork number, clean up the code 2016-06-23 17:16:43 +03:00
Péter Szilágyi
c4de28938f core: add voting and result tracking for the dao soft-fork 2016-06-23 16:43:35 +03:00
Jeffrey Wilcke
7a5b571c67 test, cmd/evm, core, core/vm: illegal code hash implementation
This implements a generic approach to enabling soft forks by allowing
anyone to put in hashes of contracts that should not be interacted from.
This will help "The DAO" in their endevour to stop any whithdrawals from
any DAO contract by convincing the mining community to accept their code
hash.
2016-06-22 11:38:25 +03:00
zsfelfoldi
3a97280ae8 eth: separate common and full node-specific API and backend service 2016-06-16 17:36:38 +02:00
Tosh Camille
ac66d96c5a cmd/utils: add space between "to" and filename 2016-06-15 11:02:22 +03:00
Jeffrey Wilcke
a38be3eb48 Merge pull request #2455 from zsfelfoldi/chaindb
core: improved chain db performance by using sequential keys
2016-06-13 15:16:09 +02:00
Bas van Kervel
861add3d72 cmd/geth: codegansta/cli package renamed to urfave/cli 2016-06-09 15:37:13 +02:00
zsfelfoldi
f9917c8c7b core: improved chainDb using sequential keys 2016-06-07 16:38:56 +02:00
Péter Szilágyi
ffaf58f0a9 cmd, console: split off the console into a reusable package 2016-05-30 17:25:23 +03:00
Felix Lange
f61e203c10 cmd/utils: fix build on *BSD 2016-05-09 13:13:44 +02:00
Felix Lange
130bccc763 cmd/utils: flush trace and CPU profile data when force-qutting
Also reduce log messages a little bit.
2016-05-06 11:16:47 +02:00
Péter Szilágyi
586eddfd09 release, all: integrate the release service into geth 2016-05-02 16:20:21 +03:00
Gustav Simonsson
ecd7199c43 common/versions, cmd/utils: add geth version contract 2016-05-02 10:31:54 +03:00
Péter Szilágyi
b06f44ecc2 cmd: add a --fakepow flag to help benchmarking database changes 2016-04-21 12:14:57 +03:00
Felix Lange
6fdd0893c3 all: fix go vet warnings 2016-04-15 11:17:27 +02:00
Felix Lange
d04a2e7557 all: update license information 2016-04-15 09:48:05 +02:00
Bas van Kervel
529897ea2b cmd/utils: strip excessive whitespace from api command line arguments 2016-04-14 16:23:43 +02:00
Péter Szilágyi
a1f1c404c3 cmd/utils: fix accounts merge error on console unlock 2016-04-12 18:01:37 +03:00
Felix Lange
ea005a0295 cmd/utils: fix --password on Windows
Text files created on Windows typically have \r\n line endings.
Trim them when reading password files.
2016-04-12 15:59:18 +02:00
Felix Lange
46e8940b19 accounts: streamline API
- Manager.Accounts no longer returns an error.
- Manager methods take Account instead of common.Address.
- All uses of Account with unkeyed fields are converted.
2016-04-12 15:58:01 +02:00
Felix Lange
85e6c40c00 accounts, crypto: move keystore to package accounts
The account management API was originally implemented as a thin layer
around crypto.KeyStore, on the grounds that several kinds of key stores
would be implemented later on. It turns out that this won't happen so
KeyStore is a superflous abstraction.

In this commit crypto.KeyStore and everything related to it moves to
package accounts and is unexported.
2016-04-12 15:56:49 +02:00
Felix Lange
dff9b4246f cmd/geth, cmd/utils: improve input handling
These changes make prompting behave consistently on all platforms:

* The input buffer is now global.
  Buffering was previously set up for each prompt, which can cause weird
  behaviour, e.g. when running "geth account update <input.txt" where
  input.txt contains three lines. In this case, the first password
  prompt would fill up the buffer with all lines and then use only the
  first one.

* Print the "unsupported terminal" warning only once.
  Now that stdin prompting has global state, we can use it to track
  the warning there.

* Work around small liner issues, particularly on Windows.
  Prompting didn't work under most of the third-party terminal emulators
  on Windows because liner assumes line editing is always available.
2016-04-12 15:56:49 +02:00
Jeffrey Wilcke
8627680e24 Merge pull request #2359 from bas-vk/rpc-optional-args
rpc: several fixes and support for optional arguments
2016-04-12 14:03:21 +02:00
Bas van Kervel
aa9fff3e68 rpc: various fixes/enhancements
rpc: be less restrictive on the request id
rpc: improved documentation
console: upgrade web3.js to version 0.16.0
rpc: cache http connections
rpc: rename wsDomains parameter to wsOrigins
2016-04-12 11:02:39 +02:00
Jeffrey Wilcke
934f587bd5 Merge pull request #2431 from bas-vk/js-preload
cmd/geth: add JS preload parameter
2016-04-12 11:00:42 +02:00
Bas van Kervel
3c5329599c cmd/geth: add JS preload parameter 2016-04-11 13:32:26 +02:00
Bas van Kervel
4081868452 cmd/utils: bugfix where database is opened multiple times 2016-04-07 12:49:00 +02:00
Jeffrey Wilcke
52dc7cb452 Merge pull request #2378 from obscuren/enable-jit-a-b
cmd/utils, miner: A/B testing JIT VM. Disabled for miners
2016-04-04 11:15:23 +02:00
Felix Lange
78b70d79ec cmd/utils: fix geth startup with empty database 2016-04-01 21:59:23 +02:00
Jeffrey Wilcke
bbeaab7e64 cmd/utils, miner: A/B testing JIT VM. Disabled for miners
This PR introduces a 10% probability that you'll run the client with the
JIT enabled testing the new client and helps us potentially catch
errors when reported.

This feature is **disabled** for miners (disabling the JIT completely).
The JIT can however be force for miners if they enable both --jitvm and
--forcejit.
2016-04-01 13:44:58 +02:00
Jeffrey Wilcke
f0cbebb19f core: added basic chain configuration
Added chain configuration options and write out during genesis database
insertion. If no "config" was found, nothing is written to the database.

Configurations are written on a per genesis base. This means
that any chain (which is identified by it's genesis hash) can have their
own chain settings.
2016-04-01 01:01:10 +02:00
Jeffrey Wilcke
75c86f8646 Merge pull request #2141 from obscuren/evm-init
core, core/vm, tests: changed the initialisation behaviour of the EVM
2016-03-23 23:20:51 +01:00
Jeffrey Wilcke
0cfa21fc7f core, eth, cmd: temporary work around for enabling the jit
This commit serves as a temporary workaround for enabling the jit until
the block customisation PR is merged in.
2016-03-23 23:02:44 +01:00
Jeffrey Wilcke
14013372ae core: Added EVM configuration options
The EVM is now initialised with an additional configured object that
allows you to turn on debugging options.
2016-03-23 23:02:42 +01:00
Jeffrey Wilcke
9866f19d6a Merge pull request #2371 from hiddentao/fix_prompt_passwd_input
Strip extraneous carriage return from end of entered password
2016-03-23 18:06:27 +01:00
Ramesh Nair
6f30034413 cmd/utils: removed password line endings when not using liner. 2016-03-23 22:53:20 +08:00
Jeffrey Wilcke
77d21e472d Merge pull request #2259 from bas-vk/http
rpc/http: improve request handling
2016-03-23 13:01:22 +01:00
Bas van Kervel
a7bae3b2a6 rpc/http: improve request handling 2016-03-23 11:27:08 +01:00
Felix Lange
c1343c8872 cmd/utils, internal/debug: show all stacks for 10x Ctrl-C induced panic
Go 1.6 only prints stacks for the current goroutine by default,
but for this panic we want to see all of them.
2016-03-12 00:59:37 +01:00
Péter Szilágyi
e90958cd29 cmd, eth, ethdb, node: prioritise chaindata for resources, bump cache 2016-03-09 10:33:39 +02:00
Bas van Kervel
0fd251c7f7 console: allow optional password on the command line 2016-03-08 15:02:21 +01:00
Kobi Gurkan
627c2311fb cmd/utils: add --keystore 2016-03-07 14:38:56 -08:00
Jeffrey Wilcke
0d89e6c2f1 cmd/utils, params: homestead block 2016-02-29 15:04:55 +01:00
Jeffrey Wilcke
ab92678fb3 cmd/utils: lower the min accepted gas price for relay and GPO to 20 shannon 2016-02-29 14:45:47 +01:00
Péter Szilágyi
770b29fd80 Merge pull request #2175 from karalabe/refactor-http-rpc
cmd, common, node, rpc: move HTTP RPC into node, drop singleton aspect
2016-02-13 14:53:48 +02:00
Péter Szilágyi
df75dbfd68 cmd, node, rpc: readd inproc RPC client, expose via node 2016-02-09 14:10:40 +02:00
Péter Szilágyi
900e124bee cmd, common, node, rpc: rework naming convention to canonical one 2016-02-09 13:24:42 +02:00
Péter Szilágyi
7486904b92 cmd, node, rpc: move websockets into node, break singleton 2016-02-05 16:53:47 +02:00
Isidoro Ghezzi
cf47ef12d3 cmd/utils: fix jspath flag typo 2016-02-05 15:32:00 +01:00
Péter Szilágyi
a13bc9d7a1 cmd, common, node, rpc: move HTTP RPC into node, drop singletone aspect 2016-02-05 13:45:36 +02:00
Péter Szilágyi
188ab928c3 cmd, common, node, rpc: move IPC into the node itself 2016-02-04 11:23:15 +02:00
Felix Lange
3750d835a1 internal/debug: APIs for profiling and tracing
The debug package provides an RPC wrapper for glog settings and the
debugging facilities of the Go runtime. They can be triggered through
both command line flags and the IPC listener.
2016-01-28 13:36:11 +01:00
Bas van Kervel
19b2640e89 rpc: migrated the RPC insterface to a new reflection based RPC layer 2016-01-26 13:51:50 +01:00
Péter Szilágyi
d8370a4e15 core, eth, node, rpc: port the admin and debug API 2015-12-14 19:36:51 +02:00
Bas van Kervel
eae81465c1 rpc: new RPC implementation with pub/sub support 2015-12-14 16:34:05 +01:00
Felix Lange
d648e96b3d cmd/utils: restore starting geth without any accounts and etherbase
Also remove some duplication around address/index parsing.
2015-12-01 11:55:52 +01:00
Péter Szilágyi
3e1000fda3 cmd, eth, node, rpc, xeth: use single-instance services 2015-11-27 11:06:12 +02:00
Péter Szilágyi
1e806c4c77 cmd, common, core, eth, node, rpc, tests, whisper, xeth: use protocol stacks 2015-11-27 11:06:12 +02:00
Jeffrey Wilcke
1c63d08ed1 cmd/geth, cmd/utils: removed legalese
Removed the legalese confirmation dialog. This closes #1992
2015-11-19 12:03:33 +01:00
Jeffrey Wilcke
a1d9ef48c5 core, eth, rpc: split out block validator and state processor
This removes the burden on a single object to take care of all
validation and state processing. Now instead the validation is done by
the `core.BlockValidator` (`types.Validator`) that takes care of both
header and uncle validation through the `ValidateBlock` method and state
validation through the `ValidateState` method. The state processing is
done by a new object `core.StateProcessor` (`types.Processor`) and
accepts a new state as input and uses that to process the given block's
transactions (and uncles for rewords) to calculate the state root for
the next block (P_n + 1).
2015-11-18 14:24:42 +01:00
Péter Szilágyi
9aa77a3769 cmd/geth, cmd/utils: surface the light KDF flag to the CLI 2015-11-10 15:47:19 +02:00
Jeffrey Wilcke
98b036ddb6 Merge pull request #1949 from karalabe/update-command-usage
cmd/geth, cmd/utils, eth: group CLI flags by purpose
2015-10-30 10:59:36 +01:00
Péter Szilágyi
3c6e285d3b cmd/geth, cmd/utils, eth: group CLI flags by purpose 2015-10-30 11:33:12 +02:00