* "Downloader queue stats" is now a DEBUG information
I think this info is more a DEBUG related information then an INFO. If it must remains an INFO, maybe it can be slow down to one time every 5 minutes or so.
* Update queue.go
"Downloader queue stats" information is now provided once every minute instead of once every 10 seconds.
* init
notes
removed some mentions of eth62, bumped protocol err too old to >=63
* remove sanity checks and bump supported protocol version up to 63
* remove 62 tests, still need to add 65
* remove 65 tests
* eth/downloader: refactor downloader + queue
downloader, fetcher: throttle-metrics, fetcher filter improvements, standalone resultcache
downloader: more accurate deliverytime calculation, less mem overhead in state requests
downloader/queue: increase underlying buffer of results, new throttle mechanism
eth/downloader: updates to tests
eth/downloader: fix up some review concerns
eth/downloader/queue: minor fixes
eth/downloader: minor fixes after review call
eth/downloader: testcases for queue.go
eth/downloader: minor change, don't set progress unless progress...
eth/downloader: fix flaw which prevented useless peers from being dropped
eth/downloader: try to fix tests
eth/downloader: verify non-deliveries against advertised remote head
eth/downloader: fix flaw with checking closed-status causing hang
eth/downloader: hashing avoidance
eth/downloader: review concerns + simplify resultcache and queue
eth/downloader: add back some locks, address review concerns
downloader/queue: fix remaining lock flaw
* eth/downloader: nitpick fixes
* eth/downloader: remove the *2*3/4 throttling threshold dance
* eth/downloader: print correct throttle threshold in stats
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
This fixes two issues with state sync restarts:
When sync restarts with a new root, some peers can have in-flight requests.
Since all peers with active requests were marked idle when exiting sync,
the new sync would schedule more requests for those peers. When the
response for the earlier request arrived, the new sync would reject it and
mark the peer idle again, rendering the peer useless until it disconnected.
The other issue was that peers would not be marked idle when they had
delivered a response, but the response hadn't been processed before
restarting the state sync. This also made the peer useless because it
would be permanently marked busy.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/downloaded: fixed datarace between synchronize and Progress
There was a race condition between `downloader.synchronize()` and `Progress` `syncWithPeer` `fetchHeight` `findAncestors` and `processHeaders`
This PR changes the behavior of the downloader a bit.
Previously the functions `Progress` `syncWithPeer` `fetchHeight` `findAncestors` and `processHeaders` read the syncMode anew within their loops. Now they read the syncMode at the start of their function and don't change it during their runtime.
* eth/downloaded: comment
* eth/downloader: added comment
* eth/downloader tests: fix spurious failing test due to race between receipts/headers
* miner tests: fix travis failure on arm64
* eth/downloader: tests - store td in ancients too
This PR makes use of go 1.13 error handling, wrapping errors and using
errors.Is to check a wrapped root-cause. It also removes the travis
builders for go 1.11 and go 1.12.
When we flush a batch of trie nodes into database during the state
sync, we should guarantee that all children should be flushed before
parent.
Actually the trie nodes commit order is strict by: children -> parent.
But when we flush all ready nodes into db, we don't need the order
anymore since
(1) they are all ready nodes (no more dependency)
(2) underlying database provides write atomicity
* core, eth: some fixes for freezer
* vendor, core/rawdb, cmd/geth: add db inspector
* core, cmd/utils: check ancient store path forceily
* cmd/geth, common, core/rawdb: a few fixes
* cmd/geth: support windows file rename and fix rename error
* core: support ancient plugin
* core, cmd: streaming file copy
* cmd, consensus, core, tests: keep genesis in leveldb
* core: write txlookup during ancient init
* core: bump database version
* all: freezer style syncing
core, eth, les, light: clean up freezer relative APIs
core, eth, les, trie, ethdb, light: clean a bit
core, eth, les, light: add unit tests
core, light: rewrite setHead function
core, eth: fix downloader unit tests
core: add receipt chain insertion test
core: use constant instead of hardcoding table name
core: fix rollback
core: fix setHead
core/rawdb: remove canonical block first and then iterate side chain
core/rawdb, ethdb: add hasAncient interface
eth/downloader: calculate ancient limit via cht first
core, eth, ethdb: lots of fixes
* eth/downloader: print ancient disable log only for fast sync
* core, eth, trie: bloom filter for trie node dedup during fast sync
* eth/downloader, trie: address review comments
* core, ethdb, trie: restart fast-sync bloom construction now and again
* eth/downloader: initialize fast sync bloom on startup
* eth: reenable eth/62 until we properly remove it
* cmd, eth: Added in the flag to step geth once sync based on input
* cmd, eth: 16400 Add an option to stop geth once in sync.
* cmd: 16400 Add an option to stop geth once in sync. WIP
* cmd/geth/main, les/fletcher: added in light mode support
* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode
* cmd: 16400 Fixed formatting issue and cleaned code
* cmd, eth, les: 16400 Fixed formatting issues
* cmd, eth, les: Performed gofmt to update formatting
* cmd, eth, les: Fixed bugs resulting formatting
* cmd/geth, eth/, les: switched to downloader event
* eth: Fixed styling and gen_config
* eth/: Fix nil error in config file
* cmd/geth: Updated countdown log
* les/fetcher.go: Removed depcreated channel
* eth/downloader.go: Removed deprecated select
* cmd/geth, cmd/utils: Fixed minor issues
* eth: Reverted config files to proper format
* eth: Fixed typo in config file
* cmd/geth, eth/down: Updated code to use header time stamp
* eth/downloader: Changed the time threshold to 10 minutes
* cmd/geth, eth/downloader: Updated downloading event to pass latest header
* cmd/geth: Updated main to use right timer object
* cmd/geth: Removed unused failed event
* cmd/geth: added in correct time field with type assertion
* cmd/geth, cmd/utils: Updated flag to use boolean
* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations
* cmd/geth: Removed unneeded import
* cmd/geth, eth/downloader: fixed event field and suggested changes
* cmd/geth, cmd/utils: Updated flag and linting issue
* core: speed up GenerateChain
Use a mock implementation of ChainReader instead of creating
and destroying a BlockChain object for each generated block.
* eth/downloader: speed up tests by generating chain only once
This change reworks the downloader tests so they share a common test
blockchain instead of generating a chain in every test. The tests are
roughly twice as fast now.
This removes a golint warning: type name will be used as trie.TrieSync by
other packages, and that stutters; consider calling this Sync.
In hexToKeybytes len(hex) is even and (even+1)/2 == even/2, remove the +1.
Updated use of Parallel and added some subtests to help isolate
them. Increased timeout in RequestHeadersByNumber so it
doesn't time out and causes other tests to break.
* ethdb: add Putter interface and Has method
* ethdb: improve docs and add IdealBatchSize
* ethdb: remove memory batch lock
Batches are not safe for concurrent use.
* core: use ethdb.Putter for Write* functions
This covers the easy cases.
* core/state: simplify StateSync
* trie: optimize local node check
* ethdb: add ValueSize to Batch
* core: optimize HasHeader check
This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.
* core: write fast sync block data in batches
Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.
* eth/downloader: commit larger state batches
Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.
* core: optimize HasBlock check
This avoids a random database read to get the number.
* core: use numberCache in HasHeader
numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.
* core: write imported block data using a batch
Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.
This commit also removes posting of logs when a forked block is imported.
* core: fix DB write error handling
* ethdb: use RLock for Has
* core: fix HasBlock comment
