Commit Graph

18 Commits

Author SHA1 Message Date
Janoš Guljaš
d70c4faf20 swarm: Fix T.Fatal inside a goroutine in tests (#18409)
* swarm/storage: fix T.Fatal inside a goroutine

* swarm/network/simulation: fix T.Fatal inside a goroutine

* swarm/network/stream: fix T.Fatal inside a goroutine

* swarm/network/simulation: consistent failures in TestPeerEventsTimeout

* swarm/network/simulation: rename sendRunSignal to triggerSimulationRun
2019-01-09 07:05:55 +01:00
Ferenc Szabo
fe03b76ffe A few minor code inspection fixes (#18393)
* swarm/network: fix code inspection problems

- typos
- redundant import alias

* p2p/simulations: fix code inspection problems

- typos
- unused function parameters
- redundant import alias
- code style issue: snake case

* swarm/network: fix unused method parameters inspections
2019-01-06 11:58:57 +01:00
lash
5e4fd8e7db swarm/network: Revised depth and health for Kademlia (#18354)
* swarm/network: Revised depth calculation with tests

* swarm/network: WIP remove redundant "full" function

* swarm/network: WIP peerpot refactor

* swarm/network: Make test methods submethod of peerpot and embed kad

* swarm/network: Remove commented out code

* swarm/network: Rename health test functions

* swarm/network: Too many n's

* swarm/network: Change hive Healthy func to accept addresses

* swarm/network: Add Healthy proxy method for api in hive

* swarm/network: Skip failing test out of scope for PR

* swarm/network: Skip all tests dependent on SuggestPeers

* swarm/network: Remove commented code and useless kad Pof member

* swarm/network: Remove more unused code, add counter on depth test errors

* swarm/network: WIP Create Healthy assertion tests

* swarm/network: Roll back health related methods receiver change

* swarm/network: Hardwire network minproxbinsize in swarm sim

* swarm/network: Rework Health test to strict

Pending add test for saturation
And add test for as many as possible up to saturation

* swarm/network: Skip discovery tests (dependent on SuggestPeer)

* swarm/network: Remove useless minProxBinSize in stream

* swarm/network: Remove unnecessary testing.T param to assert health

* swarm/network: Implement t.Helper() in checkHealth

* swarm/network: Rename check back to assert now that we have helper magic

* swarm/network: Revert WaitTillHealthy change (deferred to nxt PR)

* swarm/network: Kademlia tests GotNN => ConnectNN

* swarm/network: Renames and comments

* swarm/network: Add comments
2018-12-22 06:53:30 +01:00
lash
e1edfe0689 p2p/simulation: Test snapshot correctness and minimal benchmark (#18287)
* p2p/simulation: WIP minimal snapshot test

* p2p/simulation: Add snapshot create, load and verify to snapshot test

* build: add test tag for tests

* p2p/simulations, build: Revert travis change, build test sym always

* p2p/simulations: Add comments, timeout check on additional events

* p2p/simulation: Add benchmark template for minimal peer protocol init

* p2p/simulations: Remove unused code

* p2p/simulation: Correct timer reset

* p2p/simulations: Put snapshot check events in buffer and call blocking

* p2p/simulations: TestSnapshot fail if Load function returns early

* p2p/simulations: TestSnapshot wait for all connections before returning

* p2p/simulation: Revert to before wait for snap load (5e75594)

* p2p/simulations: add "conns after load" subtest to TestSnapshot

and nudge
2018-12-21 06:22:11 +01:00
Javier Peletier
de4265fa02 swarm/network/simulation:commented out unreachable code-avoid vet errors (#18263) 2018-12-18 07:24:59 +01:00
Elad
472c23a801 p2p/simulation: move connection methods from swarm/network/simulation (#18323) 2018-12-17 12:19:01 +01:00
Janoš Guljaš
661809714e swarm: snapshot load improvement (#18220)
* swarm/network: Hive - do not notify peer if discovery is disabled

* p2p/simulations: validate all connections on loading a snapshot

* p2p/simulations: track all connections in on snapshot loading

* p2p/simulations: add snapshotLoadTimeout variable

* p2p/simulations: ignore control events in snapshot load

* p2p/simulations: simplify event loop synchronization

* p2p/simulations: return already connected error from Load function

* p2p/simulations: log warning on snapshot loading disconnection
2018-12-07 06:51:40 +01:00
lash
1cd007ecae swarm/network: Correct neighborhood depth (#18066) 2018-11-26 17:13:59 +01:00
Janoš Guljaš
93854bbad4 swarm/network/simulation: fix New function for-loop scope (#18161) 2018-11-26 12:39:38 +01:00
Janoš Guljaš
324027640b swarm/network/simulation: use simulations.Event instead p2p.PeerEvent (#18098) 2018-11-15 21:06:27 +01:00
Anton Evangelatov
cf3b187bde swarm, cmd/swarm: address ineffectual assignments (#18048)
* swarm, cmd/swarm: address ineffectual assignments

* swarm/network: remove unused vars from testHandshake

* swarm/storage/feed: revert cursor changes
2018-11-07 20:39:08 +01:00
Felix Lange
30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
HackyMiner
6975c72981 all: fix various comment typos (#17591)
* swarm: fixed comment typo
* eth: fixed comment typo
* cmd/puppeth: fixed comment typo
2018-09-19 18:10:40 +02:00
Balint Gabor
3ff2f75636
swarm: Chunk refactor (#17659)
Co-authored-by: Janos Guljas <janos@resenje.org>
Co-authored-by: Balint Gabor <balint.g@gmail.com>
Co-authored-by: Anton Evangelatov <anton.evangelatov@gmail.com>
Co-authored-by: Viktor Trón <viktor.tron@gmail.com>
2018-09-13 11:42:19 +02:00
Geon Kim
522cfc68ff swarm: fix typos (#17473) 2018-08-21 21:13:33 +03:00
Janoš Guljaš
a72ba5a55b cmd/swarm, swarm: various test fixes (#17299)
* swarm/network/simulation: increase the sleep duration for TestRun

* cmd/swarm, swarm: fix failing tests on mac

* cmd/swarm: update TestCLISwarmFs skip comment

* swarm/network/simulation: adjust disconnections on simulation close

* swarm/network/simulation: call cleanups after net shutdown
2018-08-06 12:33:22 +03:00
holisticode
d6efa69187 Merge netsim mig to master (#17241)
* swarm: merged stream-tests migration to develop

* swarm/network: expose simulation RandomUpNode to use in stream tests

* swarm/network: wait for subs in PeerEvents and fix stream.runSyncTest

* swarm: enforce waitkademlia for snapshot tests

* swarm: fixed syncer tests and snapshot_sync_test

* swarm: linting of simulation package

* swarm: address review comments

* swarm/network/stream: fix delivery_test bugs and refactor

* swarm/network/stream: addressed PR comments @janos

* swarm/network/stream: enforce waitKademlia, improve TestIntervals

* swarm/network/stream: TestIntervals not waiting for chunk to be stored
2018-07-30 22:55:25 +02:00
Janoš Guljaš
dcaaa3c804 swarm: network simulation for swarm tests (#769)
* cmd/swarm: minor cli flag text adjustments

* cmd/swarm, swarm/storage, swarm: fix  mingw on windows test issues

* cmd/swarm: support for smoke tests on the production swarm cluster

* cmd/swarm/swarm-smoke: simplify cluster logic as per suggestion

* changed colour of landing page

* landing page reacts to enter keypress

* swarm/api/http: sticky footer for swarm landing page using flex

* swarm/api/http: sticky footer for error pages and fix for multiple choices

* swarm: propagate ctx to internal apis (#754)

* swarm/simnet: add basic node/service functions

* swarm/netsim: add buckets for global state and kademlia health check

* swarm/netsim: Use sync.Map as bucket and provide cleanup function for...

* swarm, swarm/netsim: adjust SwarmNetworkTest

* swarm/netsim: fix tests

* swarm: added visualization option to sim net redesign

* swarm/netsim: support multiple services per node

* swarm/netsim: remove redundant return statement

* swarm/netsim: add comments

* swarm: shutdown HTTP in Simulation.Close

* swarm: sim HTTP server timeout

* swarm/netsim: add more simulation methods and peer events examples

* swarm/netsim: add WaitKademlia example

* swarm/netsim: fix comments

* swarm/netsim: terminate peer events goroutines on simulation done

* swarm, swarm/netsim: naming updates

* swarm/netsim: return not healthy kademlias on WaitTillHealthy

* swarm: fix WaitTillHealthy call in testSwarmNetwork

* swarm/netsim: allow bucket to have any type for a key

* swarm: Added snapshots to new netsim

* swarm/netsim: add more tests for bucket

* swarm/netsim: move http related things into separate files

* swarm/netsim: add AddNodeWithService option

* swarm/netsim: add more tests and Start* methods

* swarm/netsim: add peer events and kademlia tests

* swarm/netsim: fix some tests flakiness

* swarm/netsim: improve random nodes selection, fix TestStartStop* tests

* swarm/netsim: remove time measurement from TestClose to avoid flakiness

* swarm/netsim: builder pattern for netsim HTTP server (#773)

* swarm/netsim: add connect related tests

* swarm/netsim: add comment for TestPeerEvents

* swarm: rename netsim package to network/simulation
2018-07-23 15:33:25 +02:00