This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
This PR adds a new fork which disables EIP-1283. Internally it's called Petersburg,
but the genesis/config field is ConstantinopleFix.
The block numbers are:
7280000 for Constantinople on Mainnet
7280000 for ConstantinopleFix on Mainnet
4939394 for ConstantinopleFix on Ropsten
9999999 for ConstantinopleFix on Rinkeby (real number decided later)
This PR also defaults to using the same ConstantinopleFix number as whatever
Constantinople is set to. That is, it will default to mainnet behaviour if ConstantinopleFix
is not set.This means that for private networks which have already transitioned
to Constantinople, this PR will break the network unless ConstantinopleFix is
explicitly set!
receipts may be null for very short time in some condition. For this case, we should not add the null value into cache. Because you will not get the right result if you keep requesting that receipt.
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
Until this commit, when sending an RPC request that called `NewEVM`, a blank `vm.Config`
would be taken so as to set some options, based on the default configuration. If some extra
configuration switches were passed to the blockchain, those would be ignored.
This PR adds a function to get the config from the blockchain, and this is what is now used
for RPC calls.
Some subsequent changes need to be made, see https://github.com/ethereum/go-ethereum/pull/17955#pullrequestreview-182237244
for the details of the discussion.
* core: speed up GenerateChain
Use a mock implementation of ChainReader instead of creating
and destroying a BlockChain object for each generated block.
* eth/downloader: speed up tests by generating chain only once
This change reworks the downloader tests so they share a common test
blockchain instead of generating a chain in every test. The tests are
roughly twice as fast now.
This adds the global accumulated refund counter to the standard
json output as a numeric json value. Previously this was not very
interesting since it was not used much, but with the new sstore
gas changes the value is a lot more interesting from a consensus
investigation perspective.
* first impl of eth_getProof
* fixed docu
* added comments and refactored based on comments from holiman
* created structs
* handle errors correctly
* change Value to *hexutil.Big in order to have the same output as parity
* use ProofList as return type
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
Makes Interface interface a bit more stateless and abstract.
Obviously this change is dictated by EVMC design. The EVMC tries to keep the responsibility for EVM features totally inside the VMs, if feasible. This makes VM "stateless" because VM does not need to pass any information between executions, all information is included in parameters of the execute function.
This commit does a few things at once:
- Updates the tests to contain the latest data from ethereum/tests repo.
- Enables Constantinople state tests. This is needed to be able to
fuzz-test the evm with constantinople rules.
- Fixes the error in opSAR that we've known about for some time. I was
kind of saving it to see if we hit upon it with the random test
generator, but it's difficult to both enable the tests and have the
bug there -- we don't want to forget about it, so maybe it's better
to just fix it.
* miner: commit state which is relative with sealing result
* consensus, core, miner, mobile: introduce sealHash interface
* miner: evict pending task with threshold
* miner: go fmt
This PR enables the indexers to work in light client mode by
downloading a part of these tries (the Merkle proofs of the last
values of the last known section) in order to be able to add new
values and recalculate subsequent hashes. It also adds CHT data to
NodeInfo.
- Update benchmarks to use a pool of int pools.
Unless benchmarks are aborted with segmentation fault.
Signed-off-by: Hyung-Kyu Choi <hqueue@users.noreply.github.com>
- Define an Interpreter interface
- One contract can call contracts from other interpreter types.
- Pass the interpreter to the operands instead of the evm.
This is meant to prevent type assertions in operands.
* core: fix func TxDifference
fix a typo in func comment;
change named return to unnamed as there's explicit return in the body
* fix another typo in TxDifference
The current trie memory database/cache that we do pruning on stores
trie nodes as binary rlp encoded blobs, and also stores the node
relationships/references for GC purposes. However, most of the trie
nodes (everything apart from a value node) is in essence just a
collection of references.
This PR switches out the RLP encoded trie blobs with the
collapsed-but-not-serialized trie nodes. This permits most of the
references to be recovered from within the node data structure,
avoiding the need to track them a second time (expensive memory wise).
* vm/test: add tests+benchmarks for mstore
* core/vm: less alloc and copying for mstore
* core/vm: less allocs in sload
* vm: check for errors more correctly
This removes a golint warning: type name will be used as trie.TrieSync by
other packages, and that stutters; consider calling this Sync.
In hexToKeybytes len(hex) is even and (even+1)/2 == even/2, remove the +1.
* core: use a wrapped `map` and `sync.RWMutex` for `TxPool.all` to remove contention in `TxPool.Get`.
* core: Remove redundant `txLookup.Find` and improve comments on txLookup methods.
The 'from' and 'to' methods on StateTransitions are reader methods and
shouldn't have inadvertent side effects on state.
It is safe to remove the check in 'from' because account existence is
implicitly checked by the nonce and balance checks. If the account has
non-zero balance or nonce, it must exist. Even if the sender account has
nonce zero at the start of the state transition or no balance, the nonce
is incremented before execution and the account will be created at that
time.
It is safe to remove the check in 'to' because the EVM creates the
account if necessary.
Fixes#15119
* common: delete StringToAddress, StringToHash
These functions are confusing because they don't parse hex, but use the
bytes of the string. This change removes them, replacing all uses of
StringToAddress(s) by BytesToAddress([]byte(s)).
* eth/filters: remove incorrect use of common.BytesToAddress
Most of these methods did not contain all the relevant information
inside the object and were not using a similar formatting type.
Moreover, the existence of a suboptimal String method breaks usage
with more advanced data dumping tools like go-spew.
* core/vm, crypto/bn256: switch over to cloudflare library
* crypto/bn256: unmarshal constraint + start pure go impl
* crypto/bn256: combo cloudflare and google lib
* travis: drop 386 test job
- according to implementation of `IntrinsicGas`
we can continue execution since problem will be detected
later. However, early return is future-proof for changes.
Talk about "state" instead of "trie timing", "trie memory" and remove
the overzealous warning when the limit is just reached. Since the time
limit is always reached on slow machines, move the message to info level
so users don't freak out about internal details.
* core/types, core/vm, eth, tests: regenerate gencodec files
* Makefile: update devtools target
Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.
* contracts/ens: update contracts and regenerate with solidity v0.4.19
The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.
* contracts/release: regenerate with solidity v0.4.19
* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19
The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.
* p2p/discv5: regenerate with recent stringer
* cmd/faucet: regenerate
* dashboard: regenerate
* eth/tracers: regenerate
* internal/jsre/deps: regenerate
* dashboard: avoid sed -i because it's not portable
* accounts/usbwallet/internal/trezor: fix go generate warnings
* core/vm: track 63/64 call gas off stack
Gas calculations in gasCall* relayed the available gas for calls by
replacing it on the stack. This lead to inconsistent traces, which we
papered over by copying the pre-execution stack in trace mode.
This change relays available gas using a temporary variable, off the
stack, and allows removing the weird copy.
* core/vm: remove stackCopy
* core/vm: pop call gas into pool
* core/vm: to -> addr
* core: allow price bump at threshold
* core: test changes to allow price bump at threshold
* core: reinstate tx replacement test underneath threshold
* core: minor test failure message cleanups
This PR implements the new LES protocol version extensions:
* new and more efficient Merkle proofs reply format (when replying to
a multiple Merkle proofs request, we just send a single set of trie
nodes containing all necessary nodes)
* BBT (BloomBitsTrie) works similarly to the existing CHT and contains
the bloombits search data to speed up log searches
* GetTxStatusMsg returns the inclusion position or the
pending/queued/unknown state of a transaction referenced by hash
* an optional signature of new block data (number/hash/td) can be
included in AnnounceMsg to provide an option for "very light
clients" (mobile/embedded devices) to skip expensive Ethash check
and accept multiple signatures of somewhat trusted servers (still a
lot better than trusting a single server completely and retrieving
everything through RPC). The new client mode is not implemented in
this PR, just the protocol extension.
* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
* core/types: make Signer derive address instead of public key
There are two reasons to do this now: The upcoming ethclient signer
doesn't know the public key, just the address. EIP 208 will introduce a
new signer which derives the 'entry point' address for transactions with
zero signature. The entry point has no public key.
Other changes to the interface ease the path make to moving signature
crypto out of core/types later.
* ethclient, mobile: add TransactionSender
The new method can get the right signer without any crypto, and without
knowledge of the signature scheme that was used when the transaction was
included.
When implementing the new bloombits based filter, I've accidentally broke null
topics by removing the special casing of common.Hash{} filter rules, which
acted as the wildcard topic until now.
This PR fixes the regression, but instead of using the magic hash
common.Hash{} as the null wildcard, the PR reworks the code to handle nil
topics during parsing, converting a JSON null into nil []common.Hash topic.
