update fixturenet-plugeth test

Fix KeyError accessing config. (#620 )
Update fixturenet-laconicd.yml
2023-11-02 09:26:47 -04:00 · 2023-10-31 12:29:19 -05:00 · 2023-10-30 15:44:46 -04:00 · 2023-10-30 11:50:33 -04:00 · 2023-10-29 23:16:39 -06:00 · 2023-10-29 22:26:15 -06:00
170 changed files with 4268 additions and 494 deletions
@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Plugeth-Test

 on:
  push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,8 +19,16 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
      - name: "Print Python version"
@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Test

 on:
  push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-test'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,7 +19,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -0,0 +1,55 @@
+name: Fixturenet-Laconicd-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-laconicd-test'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+
+jobs:
+  test:
+    name: "Run an Laconicd fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Update'
+        run: apt-get update
+      - name: 'Setup jq'
+        run: apt-get install jq -y
+      - name: 'Check jq'
+        run: |
+          which jq
+          jq --version
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
@@ -5,6 +5,8 @@ on:
    branches:
      - main
      - publish-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 jobs:
  publish:
@@ -18,7 +20,15 @@ jobs:
        run: |
          build_tag=$(./scripts/create_build_tag_file.sh)
          echo "build-tag=v${build_tag}" >> $GITHUB_OUTPUT
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -7,6 +7,8 @@ on:
    branches:
      - main
      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -7,6 +7,8 @@ on:
    branches:
      - main
      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -38,3 +48,4 @@ jobs:
      - name: "Run smoke tests"
        run: ./tests/smoke-test/run-smoke-test.sh

+
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-plugeth-test CI job
+trigger
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
@@ -0,0 +1,30 @@
+name: Fixturenet-Eth Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-eth-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-eth test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth/run-test.sh
@@ -0,0 +1,30 @@
+name: Fixturenet-Laconicd Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-laconicd-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-laconicd test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
@@ -0,0 +1,30 @@
+name: Fixturenet-Plugeth Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-plugeth-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-plugeth test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-plugeth tests"
+        run: ./tests/fixturenet-plugeth/run-test.sh
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+
@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
+trigger
@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-plugeth-test CI job
+
+trigger
@@ -7,4 +7,4 @@ __pycache__
 *~
 package
 app/data/build_tag.txt
-build
+/build
@@ -16,6 +16,7 @@ Ensure that the following are already installed:
 - [Python3](https://wiki.python.org/moin/BeginnersGuide/Download): `python3 --version` >= `3.8.10` (the Python3 shipped in Ubuntu 20+ is good to go)
 - [Docker](https://docs.docker.com/get-docker/): `docker --version` >= `20.10.21`
 - [jq](https://stedolan.github.io/jq/download/): `jq --version` >= `1.5`
+- [git](https://git-scm.com/book/en/v2/Getting-Started-Installing-Git): `git --version` >= `2.10.3`

 Note: if installing docker-compose via package manager on Linux (as opposed to Docker Desktop), you must [install the plugin](https://docs.docker.com/compose/install/linux/#install-the-plugin-manually), e.g. :

@@ -48,6 +49,18 @@ Verify operation (your version will probably be different, just check here that
 laconic-so version
 Version: 1.1.0-7a607c2-202304260513
 ```
+Save the distribution url to `~/.laconic-so/config.yml`:
+```bash
+mkdir ~/.laconic-so
+echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml
+```
+
+### Update
+If Stack Orchestrator was installed using the process described above, it is able to subsequently self-update to the current latest version by running:
+
+```bash
+laconic-so update
+```

 ## Usage

@@ -15,7 +15,7 @@

 import os
 from abc import ABC, abstractmethod
-from app.deploy import get_stack_status
+from app.deploy.deploy import get_stack_status
 from decouple import config


@@ -52,7 +52,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
    continue_on_error = ctx.obj.continue_on_error

    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    container_build_dir = Path(__file__).absolute().parent.joinpath("data", "container-build")
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")

    if local_stack:
        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
@@ -40,6 +40,7 @@ services:
      - fixturenet-eth-bootnode-geth
    ports:
      - "8545"
+      - "8546"
      - "40000"
      - "6060"

@@ -61,6 +62,9 @@ services:
      - fixturenet-eth-bootnode-geth
    volumes:
      - fixturenet_eth_geth_2_data:/root/ethdata
+    ports:
+      - "8545"
+      - "8546"

  fixturenet-eth-bootnode-lighthouse:
    restart: always
@@ -70,6 +70,7 @@ services:
    command: "/run-op-geth.sh"
    ports:
      - "0.0.0.0:8545:8545"
+      - "0.0.0.0:8546:8546"
    healthcheck:
      test: ["CMD", "nc", "-vz", "localhost:8545"]
      interval: 30s
@@ -38,6 +38,7 @@ services:
      - fixturenet-eth-bootnode-geth
    ports:
      - "8545"
+      - "8546"
      - "40000"
      - "6060"

@@ -59,6 +60,9 @@ services:
      - fixturenet-eth-bootnode-geth
    volumes:
      - fixturenet_plugeth_geth_2_data:/root/ethdata
+    ports:
+      - "8545"
+      - "8546"

  fixturenet-eth-bootnode-lighthouse:
    restart: always
@@ -0,0 +1,42 @@
+version: '3.7'
+
+services:
+  go-nitro:
+    image: cerc/go-nitro:local
+    hostname: go-nitro
+    restart: on-failure
+    depends_on:
+      # Wait for Nitro contracts to be deployed
+      nitro-contracts:
+        condition: service_completed_successfully
+    environment:
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      CERC_NITRO_PK: ${CERC_NITRO_PK:-f36f6dd450892224ee113899195ef922a4795d41c32cafb386d9aab6e0b7b0c6}
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
+      CERC_NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/data/nitro-store}
+      CERC_NITRO_MSG_PORT: ${CERC_NITRO_MSG_PORT:-3006}
+      CERC_NITRO_WS_MSG_PORT: ${CERC_NITRO_WS_MSG_PORT:-5006}
+      CERC_NITRO_RPC_PORT: ${CERC_NITRO_RPC_PORT:-4006}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/run-nitro-node.sh"]
+    volumes:
+      - go_nitro_data:/app/data
+      - nitro_deployment:/app/deployment
+      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "4006"]
+      interval: 30s
+      timeout: 5s
+      retries: 10
+      start_period: 10s
+    ports:
+      - "3006:3006"
+      - "4006:4006"
+      - "5006:5006"
+
+volumes:
+  go_nitro_data:
+  nitro_deployment:
@@ -0,0 +1,111 @@
+version: "3.2"
+services:
+  ipld-eth-server-1:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-true}
+      NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
+      NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
+      NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/nitro-data/nitro-store}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - eth_server_nitro_data:/app/nitro-data
+      - nitro_deployment:/app/deployment
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+      - "3005:3005"
+      - "4005:4005"
+      - "5005:5005"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+  ipld-eth-server-2:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-false}
+      NITRO_ENDPOINT: ${CERC_NITRO_ENDPOINT:-go-nitro:4006/api/v1}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+volumes:
+  eth_server_nitro_data:
+  nitro_deployment:
@@ -0,0 +1,8 @@
+version: "3.2"
+
+services:
+  laconic-dot-com:
+    image: cerc/laconic-dot-com:local
+    restart: always
+    ports:
+      - "3000"
@@ -0,0 +1,29 @@
+version: "3.2"
+
+services:
+  migrations:
+    restart: on-failure
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-db:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+
+  ipld-eth-db:
+    image: timescale/timescaledb:2.8.1-pg14
+    restart: always
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+    volumes:
+      - mainnet_eth_ipld_eth_db:/var/lib/postgresql/data
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      - "5432"
+volumes:
+  mainnet_eth_ipld_eth_db:
@@ -0,0 +1,24 @@
+version: "3.7"
+services:
+  ipld-eth-server:
+    restart: always
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-ipld-eth-server/srv.env
+    volumes:
+      - ../config/mainnet-eth-ipld-eth-server/config.toml:/app/config.toml:ro
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40001"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
@@ -6,7 +6,7 @@ services:
    env_file:
      - ../config/mainnet-eth-keycloak/keycloak.env
    healthcheck:
-      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      test: ["CMD", "nc", "-v", "localhost", "35432"]
      interval: 30s
      timeout: 10s
      retries: 10
@@ -14,7 +14,7 @@ services:
    volumes:
      - mainnet_eth_keycloak_db:/var/lib/postgresql/data
    ports:
-      - 5432
+      - 35432

  keycloak:
    image: cerc/keycloak:local
@@ -0,0 +1,72 @@
+
+services:
+
+  mainnet-eth-geth-1:
+    restart: always
+    hostname: mainnet-eth-geth-1
+    cap_add:
+      - SYS_PTRACE
+    image: cerc/plugeth-with-plugins:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-geth.sh"
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-plugeth/geth.env
+    volumes:
+      - mainnet_eth_plugeth_geth_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-geth.sh:/opt/run-geth.sh
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      # http api
+      - "8545"
+      # ws api
+      - "8546"
+      # ws el
+      - "8551"
+      # p2p
+      - "30303"
+      - "30303/udp"
+      # debugging
+      - "40000"
+      # metrics
+      - "6060"
+
+  mainnet-eth-lighthouse-1:
+    restart: always
+    hostname: mainnet-eth-lighthouse-1
+    healthcheck:
+      test: ["CMD", "wget", "--tries=1", "--connect-timeout=1", "--quiet", "-O", "-", "http://localhost:5052/eth/v2/beacon/blocks/head"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 30s
+    environment:
+      LIGHTHOUSE_EXECUTION_ENDPOINT: "http://mainnet-eth-geth-1:8551"
+    env_file:
+      - ../config/mainnet-eth-plugeth/lighthouse.env
+    image: cerc/lighthouse:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-lighthouse.sh"
+    volumes:
+      - mainnet_eth_plugeth_lighthouse_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-lighthouse.sh:/opt/run-lighthouse.sh
+    ports:
+      # api
+      - "5052"
+      # metrics
+      - "5054"
+      # p2p
+      - "9000"
+      - "9000/udp"
+
+volumes:
+  mainnet_eth_plugeth_config_data:
+  mainnet_eth_plugeth_geth_1_data:
+  mainnet_eth_plugeth_lighthouse_1_data:
@@ -15,18 +15,19 @@ services:
      CERC_DENY_MULTIADDRS: ${CERC_DENY_MULTIADDRS}
      CERC_PUBSUB: ${CERC_PUBSUB}
      CERC_GOSSIPSUB_DIRECT_PEERS: ${CERC_GOSSIPSUB_DIRECT_PEERS}
-      CERC_RELEASE: "laconic-v3"
      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
      CERC_APP_WATCHER_URL: ${CERC_APP_WATCHER_URL}
-      CERC_PAYMENT_NITRO_ADDRESS: ${CERC_PAYMENT_NITRO_ADDRESS}
+      CERC_PAYMENT_NITRO_ADDRESS: ${CERC_PAYMENT_NITRO_ADDRESS:-0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94}
      CERC_SNAP_URL: ${CERC_SNAP_URL}
-    working_dir: /scripts
-    command: ["sh", "mobymask-app-start.sh"]
+    working_dir: /app
+    command: ["bash", "/scripts/mobymask-app-start.sh"]
    volumes:
      - ../config/watcher-mobymask-v3/mobymask-app-start.sh:/scripts/mobymask-app-start.sh
-      - ../config/watcher-mobymask-v2/mobymask-app-config.json:/app/src/mobymask-app-config.json
+      - peers_ids:/peers
+      - mobymask_deployment:/server
+      - nitro_deployment:/nitro
    ports:
      - "127.0.0.1:3004:80"
    healthcheck:
@@ -37,3 +38,8 @@ services:
      start_period: 10s
    extra_hosts:
      - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  mobymask_deployment:
+  nitro_deployment:
@@ -0,0 +1,14 @@
+version: '3.7'
+
+services:
+  mobymask-snap:
+    restart: unless-stopped
+    image: cerc/mobymask-snap:local
+    ports:
+      - "127.0.0.1:8080:8080"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "8080"]
+      interval: 10s
+      timeout: 5s
+      retries: 10
+      start_period: 10s
@@ -0,0 +1,23 @@
+version: '3.7'
+
+services:
+  # Optionally deploys the Nitro contracts
+  nitro-contracts:
+    image: cerc/nitro-contracts:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT:-http://fixturenet-eth-geth-1:8545}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    volumes:
+      - ../config/nitro-contracts/deploy.sh:/app/deploy.sh
+      - nitro_deployment:/app/deployment
+    command: ["bash", "-c", "/app/deploy.sh"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  nitro_deployment:
@@ -0,0 +1,7 @@
+version: '3.7'
+services:
+    nitro-rpc-client:
+      image: cerc/nitro-rpc-client:local
+      hostname: nitro-rpc-client
+      restart: on-failure
+      command: ["bash", "-c", "tail -f /dev/null"]
@@ -0,0 +1,80 @@
+version: '3.7'
+
+services:
+  ponder-er20-contracts:
+    image: cerc/watcher-erc20:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT:-http://fixturenet-eth-geth-1:8545}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+    volumes:
+      - ../config/ponder/deploy-erc20-contract.sh:/app/deploy-erc20-contract.sh
+      - erc20_deployment:/app/deployment
+    command: ["bash", "-c", "/app/deploy-erc20-contract.sh"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  ponder-app-indexer-1:
+    hostname: ponder-app-indexer-1
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_PONDER_RPC_URL_1: ${PONDER_RPC_URL_1:-http://ipld-eth-server-2:8081}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK_1:-58368d20ff12f17669c06158c21d885897aa56f9be430edc789614bf9851d53f}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK_1:-fb1e9af328c283ca3e2486e7c24d13582b7912057d8b9542ff41503c85bc05c0}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0x660a4bEF3fbC863Fcd8D3CDB39242aE513d7D92e}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/go-nitro/tcp/5006/ws/p2p/16Uiu2HAmNUiX7bpCpbo5JdqEebp85ptGU2Vk2AT9E3BykvbwQ3F9}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.indexer-1.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - erc20_deployment:/erc20
+      - ponder_indexer_1_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "127.0.0.1:42070:42070"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  ponder-app-indexer-2:
+    hostname: ponder-app-indexer-2
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer-1:42070/graphql}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK_2:-0aca28ba64679f63d71e671ab4dbb32aaa212d4789988e6ca47da47601c18fe2}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK_2:-6177345b77c4069ac4d553f8b43cf68a799ca4bb63eac93d6cf796d63694ebf0}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.indexer-2.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - erc20_deployment:/erc20
+      - ponder_indexer_2_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "127.0.0.1:42071:42070"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  nitro_deployment:
+  erc20_deployment:
+  ponder_indexer_1_nitro_data:
+  ponder_indexer_2_nitro_data:
@@ -0,0 +1,39 @@
+
+version: '3.7'
+
+services:
+  ponder-app-watcher:
+      hostname: ponder-app-watcher
+      depends_on:
+        - ponder-app-indexer-1
+      restart: unless-stopped
+      image: cerc/ponder:local
+      working_dir: /app/examples/token-erc20
+      environment:
+        CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+        CERC_PONDER_NITRO_PK: ${CERC_PONDER_WATCHER_NITRO_PK:-febb3b74b0b52d0976f6571d555f4ac8b91c308dfa25c7b58d1e6a7c3f50c781}
+        CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_WATCHER_NITRO_CHAIN_PK:-be4aa664815ea3bc3d63118649a733f6c96b243744310806ecb6d96359ab62cf}
+        CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+        CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+        CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer-2:42070/graphql}
+        CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01}
+        CERC_INDEXER_NITRO_PAY_AMOUNT: ${CERC_INDEXER_NITRO_PAY_AMOUNT:-50}
+      command: ["bash", "./ponder-start.sh"]
+      volumes:
+        - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+        - ../config/ponder/ponder.watcher.config.ts:/app/examples/token-erc20/ponder.config.ts
+        - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+        - peers_ids:/peers
+        - nitro_deployment:/nitro
+        - erc20_deployment:/erc20
+        - ponder_watcher_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+      ports:
+        - "127.0.0.1:42069:42069"
+      extra_hosts:
+        - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  nitro_deployment:
+  erc20_deployment:
+  ponder_watcher_nitro_data:
@@ -4,6 +4,7 @@ services:
    restart: always
    environment:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_TEST_PARAM_1: ${CERC_TEST_PARAM_1:-FAILED}
    volumes:
      - test-data:/data
    ports:
@@ -34,7 +34,7 @@ services:
      - ETH_RPC_URL=http://go-ethereum:8545
    command: ["sh", "-c", "yarn server"]
    volumes:
-      - ../config/watcher-erc20/erc20-watcher.toml:/app/packages/erc20-watcher/environments/local.toml
+      - ../config/watcher-erc20/erc20-watcher.toml:/app/environments/local.toml
    ports:
      - "0.0.0.0:3002:3001"
      - "0.0.0.0:9002:9001"
@@ -32,20 +32,13 @@ services:
    environment:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
      ENV: "PROD"
-      CERC_L2_GETH_RPC: ${CERC_L2_GETH_RPC}
-      CERC_L1_ACCOUNTS_CSV_URL: ${CERC_L1_ACCOUNTS_CSV_URL}
-      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER}
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
      CERC_MOBYMASK_APP_BASE_URI: ${CERC_MOBYMASK_APP_BASE_URI}
      CERC_DEPLOYED_CONTRACT: ${CERC_DEPLOYED_CONTRACT}
-      CERC_L2_GETH_HOST: ${CERC_L2_GETH_HOST}
-      CERC_L2_GETH_PORT: ${CERC_L2_GETH_PORT}
-      CERC_L2_NODE_HOST: ${CERC_L2_NODE_HOST}
-      CERC_L2_NODE_PORT: ${CERC_L2_NODE_PORT}
-    command: ["sh", "deploy-and-generate-invite.sh"]
+    command: ["bash", "-c", "./deploy-and-generate-invite.sh"]
    volumes:
-      - ../config/network/wait-for-it.sh:/app/packages/server/wait-for-it.sh
-      - ../config/watcher-mobymask-v2/secrets-template.json:/app/packages/server/secrets-template.json
-      - ../config/watcher-mobymask-v2/deploy-and-generate-invite.sh:/app/packages/server/deploy-and-generate-invite.sh
+      - ../config/watcher-mobymask-v3/deploy-and-generate-invite.sh:/app/packages/server/deploy-and-generate-invite.sh
      - mobymask_deployment:/app/packages/server
    extra_hosts:
      - "host.docker.internal:host-gateway"
@@ -62,7 +55,6 @@ services:
      - ../config/watcher-mobymask-v2/generate-peer-ids.sh:/app/packages/peer/generate-peer-ids.sh
      - peers_ids:/peer-ids

-  # Optionally deploys the Nitro contracts; sets them at the required path
  # Starts the MobyMask v3 watcher server
  mobymask-watcher-server:
    image: cerc/watcher-mobymask-v3:local
@@ -74,13 +66,15 @@ services:
        condition: service_completed_successfully
      mobymask:
        condition: service_completed_successfully
+      nitro-contracts:
+        condition: service_completed_successfully
    env_file:
      - ../config/watcher-mobymask-v3/mobymask-params.env
    environment:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_L2_GETH_RPC: ${CERC_L2_GETH_RPC}
-      CERC_L1_ACCOUNTS_CSV_URL: ${CERC_L1_ACCOUNTS_CSV_URL}
-      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER}
+      CERC_ETH_RPC_QUERY_ENDPOINT: ${CERC_ETH_RPC_QUERY_ENDPOINT}
+      CERC_ETH_RPC_MUTATION_ENDPOINT: ${CERC_ETH_RPC_MUTATION_ENDPOINT}
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL}
      CERC_RELAY_PEERS: ${CERC_RELAY_PEERS}
      CERC_DENY_MULTIADDRS: ${CERC_DENY_MULTIADDRS}
      CERC_PUBSUB: ${CERC_PUBSUB}
@@ -90,21 +84,22 @@ services:
      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
-      CERC_PRIVATE_KEY_PEER: ${CERC_PRIVATE_KEY_PEER}
-      CERC_PRIVATE_KEY_NITRO: ${CERC_PRIVATE_KEY_NITRO}
+      CERC_PRIVATE_KEY_PEER: ${CERC_PRIVATE_KEY_PEER:-111b7500bdce494d6f4bcfe8c2a0dde2ef92f751d9070fac6475dbd6d8021b3f}
+      CERC_WATCHER_NITRO_PK: ${CERC_WATCHER_NITRO_PK:-0279651921cd800ac560c21ceea27aab0107b67daf436cdd25ce84cad30159b4}
      CERC_PEER_ID: ${CERC_PEER_ID}
-    entrypoint: ["bash", "-c"]
-    command: ["./deploy-nitro-contracts.sh && ./start-server.sh"]
+      CERC_ENABLE_UPSTREAM_PAYMENTS: ${CERC_ENABLE_UPSTREAM_PAYMENTS}
+      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/ipld-eth-server-1/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./start-server.sh"]
    volumes:
-      - ../config/watcher-mobymask-v3/deploy-nitro-contracts.sh:/app/deploy-nitro-contracts.sh
-      - ../config/watcher-mobymask-v3/deploy-nitro-contracts.ts:/app/deploy-nitro-contracts.ts
      - ../config/watcher-mobymask-v3/watcher-config-template.toml:/app/environments/watcher-config-template.toml
      - ../config/watcher-mobymask-v3/watcher-config-rates.toml:/app/environments/rates.toml
      - ../config/watcher-mobymask-v3/keys:/app/keys
      - ../config/watcher-mobymask-v3/start-server.sh:/app/start-server.sh
-      - nitro_data:/app/out/nitro-db
+      - watcher_nitro_data:/app/out/nitro-db
      - peers_ids:/app/peers
-      - nitro_addresses:/nitro
+      - nitro_deployment:/nitro
      - mobymask_deployment:/server
    # Expose GQL, metrics and relay node ports
    ports:
@@ -124,5 +119,5 @@ volumes:
  mobymask_watcher_db_data:
  peers_ids:
  mobymask_deployment:
-  nitro_addresses:
-  nitro_data:
+  nitro_deployment:
+  watcher_nitro_data:
@@ -5,5 +5,5 @@ services:
    userKey: REPLACE_WITH_MYKEY
    bondId:
    chainId: laconic_9000-1
-    gas: 250000
+    gas: 350000
    fees: 200000aphoton
@@ -0,0 +1,50 @@
+#!/bin/bash
+
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  NA_ADDRESS=${CERC_NA_ADDRESS}
+  VPA_ADDRESS=${CERC_VPA_ADDRESS}
+  CA_ADDRESS=${CERC_CA_ADDRESS}
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Reading Nitro addresses from ${nitro_addresses_file}"
+
+  NA_ADDRESS=$(jq -r '.nitroAdjudicatorAddress' ${nitro_addresses_file})
+  VPA_ADDRESS=$(jq -r '.virtualPaymentAppAddress' ${nitro_addresses_file})
+  CA_ADDRESS=$(jq -r '.consensusAppAddress' ${nitro_addresses_file})
+else
+  echo "File ${nitro_addresses_file} not found"
+  exit 1
+fi
+
+echo "Running Nitro node"
+
+# Assuming CERC_NITRO_CHAIN_URL is of format <ws|http>://host:port
+ws_host=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 1)
+ws_port=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 2)
+
+# Wait till chain endpoint is available
+retry_interval=5
+while true; do
+  nc -z -w 1 "$ws_host" "$ws_port"
+
+  if [ $? -eq 0 ]; then
+    echo "Chain endpoint is available"
+    break
+  fi
+
+  echo "Chain endpoint not yet available, retrying in $retry_interval seconds..."
+  sleep $retry_interval
+done
+
+./nitro -chainurl ${CERC_NITRO_CHAIN_URL} -msgport ${CERC_NITRO_MSG_PORT} -rpcport ${CERC_NITRO_RPC_PORT} -wsmsgport ${CERC_NITRO_WS_MSG_PORT} -publicip "0.0.0.0" -pk ${CERC_NITRO_PK} -chainpk ${CERC_NITRO_CHAIN_PK} -naaddress ${NA_ADDRESS} -vpaaddress ${VPA_ADDRESS} -caaddress ${CA_ADDRESS} -usedurablestore ${CERC_NITRO_USE_DURABLE_STORE} -durablestorefolder ${CERC_NITRO_DURABLE_STORE_FOLDER} -tlscertfilepath "" -tlsKeyFilepath ""
@@ -0,0 +1,71 @@
+#!/bin/sh
+
+read_nitro_addresses() {
+  nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+  # Check if CERC_NA_ADDRESS environment variable is set
+  if [ -n "$CERC_NA_ADDRESS" ]; then
+    echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+    echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+    echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+    echo "Using the above Nitro addresses"
+
+    export NITRO_NA_ADDRESS=${CERC_NA_ADDRESS}
+    export NITRO_VPA_ADDRESS=${CERC_VPA_ADDRESS}
+    export NITRO_CA_ADDRESS=${CERC_CA_ADDRESS}
+  else
+    # Read addresses from a file
+    # Keep retrying until found
+    echo "Reading Nitro addresses from ${nitro_addresses_file}"
+    retry_interval=5
+    while true; do
+      if [[ -e "$nitro_addresses_file" ]]; then
+        export NITRO_NA_ADDRESS=$(jq -r '.nitroAdjudicatorAddress' ${nitro_addresses_file})
+        export NITRO_VPA_ADDRESS=$(jq -r '.virtualPaymentAppAddress' ${nitro_addresses_file})
+        export NITRO_CA_ADDRESS=$(jq -r '.consensusAppAddress' ${nitro_addresses_file})
+
+        break
+      else
+        echo "File not yet available, retrying in $retry_interval seconds..."
+        sleep $retry_interval
+      fi
+    done
+  fi
+}
+
+wait_for_nitro_endpoint() {
+  retry_interval=5
+  while true; do
+    curl -I -s -o /dev/null $NITRO_ENDPOINT/health
+
+    if [ $? -eq 0 ]; then
+      echo "Nitro endpoint is up"
+      break
+    else
+      echo "Nitro endpoint not available yet, retrying in $retry_interval seconds..."
+      sleep $retry_interval
+    fi
+  done
+}
+
+if [ "$NITRO_RUN_NODE_IN_PROCESS" = "true" ]; then
+  read_nitro_addresses
+else
+  wait_for_nitro_endpoint
+fi
+
+echo "Beginning the ipld-eth-server process"
+
+START_CMD="./ipld-eth-server"
+if [ "true" == "$CERC_REMOTE_DEBUG" ] && [ -x "/usr/local/bin/dlv" ]; then
+    START_CMD="/usr/local/bin/dlv --listen=:40000 --headless=true --api-version=2 --accept-multiclient exec `pwd`/ipld-eth-server --continue --"
+fi
+
+echo running: $START_CMD ${VDB_COMMAND} --config=`pwd`/config.toml
+$START_CMD ${VDB_COMMAND} --config=`pwd`/config.toml
+rv=$?
+
+if [ $rv != 0 ]; then
+  echo "ipld-eth-server startup failed"
+  exit 1
+fi
@@ -0,0 +1,15 @@
+DATABASE_HOSTNAME="ipld-eth-db"
+DATABASE_NAME="cerc"
+DATABASE_PASSWORD="CHANGEME"
+DATABASE_PORT=5432
+DATABASE_USER="vdbm"
+
+POSTGRES_DB="${DATABASE_NAME}"
+POSTGRES_PASSWORD="${DATABASE_PASSWORD}"
+POSTGRES_USER="${DATABASE_USER}"
+
+CERC_STATEDIFF_DB_HOST="${DATABASE_HOSTNAME}"
+CERC_STATEDIFF_DB_NAME="${DATABASE_NAME}"
+CERC_STATEDIFF_DB_PASSWORD="${DATABASE_PASSWORD}"
+CERC_STATEDIFF_DB_PORT=${DATABASE_PORT}
+CERC_STATEDIFF_DB_USER="${DATABASE_USER}"
@@ -0,0 +1,33 @@
+[database]
+    name     = "" # $DATABASE_NAME
+    hostname = "" # $DATABASE_HOSTNAME
+    port     = 5432 # $DATABASE_PORT
+    user     = "" # $DATABASE_USER
+    password = "" # $DATABASE_PASSWORD
+
+[log]
+    level = "info" # $LOG_LEVEL
+
+[server]
+    ipc = false
+    ipcPath = "" # $SERVER_IPC_PATH
+    ws = false
+    wsPath = "0.0.0.0:8080" # $SERVER_WS_PATH
+    http = true
+    httpPath = "0.0.0.0:8081" # $SERVER_HTTP_PATH
+    graphql = false # $SERVER_GRAPHQL
+    graphqlPath = "0.0.0.0:8082" # $SERVER_GRAPHQL_PATH
+
+[ethereum]
+    chainConfig = "" # ETH_CHAIN_CONFIG
+    chainID = "1" # $ETH_CHAIN_ID
+    rpcGasCap = "1000000000000" # $ETH_RPC_GAS_CAP
+    httpPath = "mainnet-eth-geth-1:8545" # $ETH_HTTP_PATH
+    supportsStateDiff = true # $ETH_SUPPORTS_STATEDIFF
+    stateDiffTimeout = "4m" # $ETH_STATEDIFF_TIMEOUT
+    forwardEthCalls = false # $ETH_FORWARD_ETH_CALLS
+    proxyOnError = true # $ETH_PROXY_ON_ERROR
+    nodeID = "" # $ETH_NODE_ID
+    clientName = "" # $ETH_CLIENT_NAME
+    genesisBlock = "" # $ETH_GENESIS_BLOCK
+    networkID = "1" # $ETH_NETWORK_ID
@@ -0,0 +1,27 @@
+CERC_REMOTE_DEBUG="false"
+
+LOG_LEVEL="debug"
+
+ETH_CHAIN_ID=1
+ETH_CLIENT_NAME="Geth"
+ETH_FORWARD_ETH_CALLS="false"
+ETH_FORWARD_GET_STORAGE_AT="false"
+ETH_GENESIS_BLOCK="0xd4e56740f876aef8c010b86a40d5f56745a118d0906a34e69aec8c0db1cb8fa3"
+ETH_HTTP_PATH="mainnet-eth-geth-1:8545"
+ETH_NETWORK_ID=1
+ETH_NODE_ID=1112
+ETH_PROXY_ON_ERROR="true"
+ETH_RPC_GAS_CAP=1000000000000
+ETH_SUPPORTS_STATEDIFF="true"
+ETH_STATEDIFF_TIMEOUT=4m
+
+SERVER_HTTP_PATH=0.0.0.0:8081
+SERVER_GRAPHQL="false"
+SERVER_GRAPHQLPATH=0.0.0.0:8082
+
+METRICS="true"
+PROM_HTTP="true"
+PROM_HTTP_ADDR="0.0.0.0"
+PROM_HTTP_PORT="8090"
+
+VDB_COMMAND="serve"
@@ -1,8 +1,11 @@
 POSTGRES_DB=keycloak
 POSTGRES_USER=keycloak
 POSTGRES_PASSWORD=keycloak
+# Don't change this unless you also change the healthcheck in docker-compose-mainnet-eth-keycloak.yml
+PGPORT=35432
 KC_DB=postgres
 KC_DB_URL_HOST=keycloak-db
+KC_DB_URL_PORT=${PGPORT}
 KC_DB_URL_DATABASE=${POSTGRES_DB}
 KC_DB_USERNAME=${POSTGRES_USER}
 KC_DB_PASSWORD=${POSTGRES_PASSWORD}
@@ -15,42 +15,49 @@ server {
 }

 upstream geth-pool {
-  keepalive 100;
-  hash $user_id consistent;
-  server server-a:8545;
-  server server-b:8545;
-  server server-c:8545;
+  server server-a:8545 max_fails=10 fail_timeout=2s;
+  server server-c:8545 max_fails=10 fail_timeout=2s backup;
+  server server-b:8545 max_fails=10 fail_timeout=2s backup;
+  keepalive 200;
 }

-# self-reg happens on one server for clarity
 upstream reg-ui-pool {
-  keepalive 100;
+  keepalive 2;
  server server-a:8085;
 }

 upstream reg-api-pool {
-  keepalive 100;
+  keepalive 2;
  server server-a:8086;
 }

-# auth uses server-a if available
+# auth uses the reg server when available
 upstream auth-pool {
-  keepalive 100;
+  keepalive 10;
  server server-a:8080;
  server server-b:8080 backup;
  server server-c:8080 backup;
 }

-log_format upstreamlog '[$time_local] $remote_addr $user_id - $server_name $host to: $upstream_addr: $request $status upstream_response_time $upstream_response_time msec $msec request_time $request_time';
-proxy_cache_path                /var/cache/nginx/auth_cache levels=1 keys_zone=auth_cache:1m max_size=5m inactive=60m;
+
+log_format upstreamlog '[$time_local] $msec $remote_addr $user_id - $server_name($host) to $upstream_addr: $request $status upstream_response_time $upstream_response_time request_time $request_time';
+proxy_cache_path /var/cache/nginx/auth_cache levels=1 keys_zone=auth_cache:1m max_size=5m inactive=60m;
+
 server {
    listen 443 ssl http2;
    server_name my.example.com;
+    keepalive_requests 500000;
+    keepalive_timeout 90s;
+    http2_max_requests 5000000;
+    http2_max_concurrent_streams 1024;
+    http2_idle_timeout 3m;
+    http2_recv_timeout 30s;
    access_log /var/log/nginx/my.example.com-access.log upstreamlog;
    error_log /var/log/nginx/my.example.com-error.log;

    ssl_certificate /etc/nginx/ssl/my.example.com/cert.pem;
    ssl_certificate_key /etc/nginx/ssl/my.example.com/key.pem;
+    ssl_session_cache shared:SSL:10m;

    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
@@ -60,7 +67,6 @@ server {
    #rewrite ^/?$ /newuser/;
    rewrite ^/?$ https://www.example.com/;

-
    # geth-pool ETH API
    location ~ ^/v1/eth/?([^/]*)$ {
        set $apiKey $1;
@@ -71,8 +77,8 @@ server {
        auth_request_set $user_id $sent_http_x_user_id;
        rewrite /.*$ / break;

-        client_max_body_size 3m;
-        client_body_buffer_size 3m;
+        client_max_body_size       3m;
+        client_body_buffer_size    3m;
        proxy_buffer_size          32k;
        proxy_buffers              16 32k;
        proxy_busy_buffers_size    96k;
@@ -80,8 +86,10 @@ server {
        proxy_pass  http://geth-pool;
        proxy_set_header X-Original-Remote-Addr $remote_addr;
        proxy_set_header X-User-Id $user_id;
+        proxy_http_version 1.1;
+        proxy_set_header Connection "";
    }
-    
+
    # keycloak
    location = /auth {
        internal;
@@ -95,6 +103,8 @@ server {
        proxy_set_header X-Original-URI $request_uri;
        proxy_set_header X-Original-Remote-Addr $remote_addr;
        proxy_set_header X-Original-Host $host;
+        proxy_http_version 1.1;
+        proxy_set_header Connection "";
    }

    location /newuser/ {
@@ -0,0 +1,75 @@
+# Enable remote debugging using dlv
+CERC_REMOTE_DEBUG=false
+
+# Enable startup script debug output.
+CERC_SCRIPT_DEBUG=false
+
+# Simple toggle to choose either a 'full' node or an 'archive' node
+# (controls the values of --syncmode --gcmode --snapshot)
+CERC_GETH_MODE_QUICK_SET=archive
+
+# Path to plugeth plugins.
+CERC_PLUGINS_DIR="/usr/local/lib/plugeth"
+
+# Will turn on statediffing automatically if CERC_STATEDIFF_DB_HOST exists (see ../mainnet-eth-ipld-eth-db/db.env).
+CERC_RUN_STATEDIFF="detect"
+
+# The minimum necessary verion of the DB to enable statediffing.
+CERC_STATEDIFF_DB_GOOSE_MIN_VER=18
+
+# Whether all statediff-related DB statements should be logged (useful for debugging).
+CERC_STATEDIFF_DB_LOG_STATEMENTS=false
+
+# The number of concurrent workers to process state diff objects
+CERC_STATEDIFF_WORKERS=16
+
+# Each statediffing node should have a unique node ID.
+CERC_STATEDIFF_DB_NODE_ID=1111
+
+# Optional custom node name.
+# GETH_NODE_NAME=""
+
+# Specify any other geth CLI options.
+GETH_OPTS=""
+
+# --cache
+GETH_CACHE=1024
+
+# --cache.database
+GETH_CACHE_DB=50
+
+# --cache.gc
+GETH_CACHE_GC=25
+
+# --cache.trie
+GETH_CACHE_TRIE=15
+
+# --datadir
+GETH_DATADIR="/data"
+
+# --http.api
+GETH_HTTP_API="eth,web3,net"
+
+# --authrpc.jwtsecret
+GETH_JWTSECRET="/etc/mainnet-eth/jwtsecret"
+
+# --maxpeers
+GETH_MAX_PEERS=100
+
+# --rpc.evmtimeout
+GETH_RPC_EVMTIMEOUT=0
+
+# --rpc.gascap
+GETH_RPC_GASCAP=0
+
+# --txlookuplimit
+GETH_TXLOOKUPLIMIT=0
+
+# --verbosity
+GETH_VERBOSITY=3
+
+# --log.vmodule
+GETH_VMODULE="rpc/*=4"
+
+# --ws.api
+GETH_WS_API="eth,web3,net"
@@ -0,0 +1,33 @@
+# Enable startup script debug output.
+CERC_SCRIPT_DEBUG=false
+
+# Specify any other lighthouse CLI options.
+LIGHTHOUSE_OPTS=""
+
+# Override the advertised public IP (optional)
+# --enr-address
+#LIGHTHOUSE_ENR_ADDRESS=""
+
+# --checkpoint-sync-url
+LIGHTHOUSE_CHECKPOINT_SYNC_URL="https://beaconstate.ethstaker.cc"
+
+# --checkpoint-sync-url-timeout
+LIGHTHOUSE_CHECKPOINT_SYNC_URL_TIMEOUT=300
+
+# --datadir
+LIGHTHOUSE_DATADIR=/data
+
+# --debug-level
+LIGHTHOUSE_DEBUG_LEVEL=info
+
+# --http-port
+LIGHTHOUSE_HTTP_PORT=5052
+
+# --execution-jwt
+LIGHTHOUSE_JWTSECRET=/etc/mainnet-eth/jwtsecret
+
+# --metrics-port
+LIGHTHOUSE_METRICS_PORT=5054
+
+# --port --enr-udp-port --enr-tcp-port
+LIGHTHOUSE_NETWORK_PORT=9000
@@ -0,0 +1,121 @@
+#!/bin/sh
+if [[ "true" == "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+
+START_CMD="geth"
+if [[ "true" == "$CERC_REMOTE_DEBUG" ]] && [[ -x "/usr/local/bin/dlv" ]]; then
+    START_CMD="/usr/local/bin/dlv --listen=:40000 --headless=true --api-version=2 --accept-multiclient exec /usr/local/bin/geth --continue --"
+fi
+
+# See https://linuxconfig.org/how-to-propagate-a-signal-to-child-processes-from-a-bash-script
+cleanup() {
+    echo "Signal received, cleaning up..."
+
+    # Kill the child process first (CERC_REMOTE_DEBUG=true uses dlv which starts geth as a child process)
+    pkill -P ${geth_pid}
+    sleep 2
+    kill $(jobs -p)
+
+    wait
+    echo "Done"
+}
+trap 'cleanup' SIGINT SIGTERM
+
+MODE_FLAGS=""
+if [[ "$CERC_GETH_MODE_QUICK_SET" = "archive" ]]; then
+  MODE_FLAGS="--syncmode=${GETH_SYNC_MODE:-full} --gcmode=${GETH_GC_MODE:-archive} --snapshot=${GETH_SNAPSHOT:-false}"
+else
+  MODE_FLAGS="--syncmode=${GETH_SYNC_MODE:-snap} --gcmode=${GETH_GC_MODE:-full} --snapshot=${GETH_SNAPSHOT:-true}"
+fi
+
+if [[ "${CERC_RUN_STATEDIFF}" == "detect" ]] && [[ -n "$CERC_STATEDIFF_DB_HOST" ]]; then
+  dig_result=$(dig $CERC_STATEDIFF_DB_HOST +short)
+  dig_status_code=$?
+  if [[ $dig_status_code = 0 && -n $dig_result ]]; then
+    echo "Statediff DB at $CERC_STATEDIFF_DB_HOST"
+    CERC_RUN_STATEDIFF="true"
+  else
+    echo "No statediff DB available."
+    CERC_RUN_STATEDIFF="false"
+  fi
+fi
+
+STATEDIFF_OPTS=""
+if [[ "${CERC_RUN_STATEDIFF}" == "true" ]]; then
+  ready=0
+  echo "Waiting for statediff DB..."
+  while [ $ready -eq 0 ]; do
+    sleep 1
+    export PGPASSWORD="$CERC_STATEDIFF_DB_PASSWORD"
+    result=$(psql -h "$CERC_STATEDIFF_DB_HOST" \
+      -p "$CERC_STATEDIFF_DB_PORT" \
+      -U "$CERC_STATEDIFF_DB_USER" \
+      -d "$CERC_STATEDIFF_DB_NAME" \
+      -t -c 'select max(version_id) from goose_db_version;' 2>/dev/null | awk '{ print $1 }')
+    if [ -n "$result" ]; then
+      echo "DB ready..."
+      if [[ $result -ge $CERC_STATEDIFF_DB_GOOSE_MIN_VER ]]; then
+        ready=1
+      else
+        echo "DB not at required version (want $CERC_STATEDIFF_DB_GOOSE_MIN_VER, have $result)"
+      fi
+    fi
+  done
+
+  STATEDIFF_OPTS="--statediff \
+  --statediff.db.host=$CERC_STATEDIFF_DB_HOST \
+  --statediff.db.name=$CERC_STATEDIFF_DB_NAME \
+  --statediff.db.nodeid=$CERC_STATEDIFF_DB_NODE_ID \
+  --statediff.db.password=$CERC_STATEDIFF_DB_PASSWORD \
+  --statediff.db.port=$CERC_STATEDIFF_DB_PORT \
+  --statediff.db.user=$CERC_STATEDIFF_DB_USER \
+  --statediff.db.logstatements=${CERC_STATEDIFF_DB_LOG_STATEMENTS:-false} \
+  --statediff.db.copyfrom=${CERC_STATEDIFF_DB_COPY_FROM:-true} \
+  --statediff.waitforsync=${CERC_STATEDIFF_WAIT_FO_SYNC:-true} \
+  --statediff.workers=${CERC_STATEDIFF_WORKERS:-1} \
+  --statediff.writing=${CERC_STATEDIFF_WRITING:-true}"
+
+  if [[ -d "${CERC_PLUGINS_DIR}" ]]; then
+    # With plugeth, we separate the statediff options by prefixing with ' -- '
+    STATEDIFF_OPTS="--pluginsdir "${CERC_PLUGINS_DIR}" -- ${STATEDIFF_OPTS}"
+  fi
+fi
+
+$START_CMD \
+  $MODE_FLAGS \
+  --datadir="${GETH_DATADIR}"\
+  --identity="${GETH_NODE_NAME}" \
+  --maxpeers=${GETH_MAX_PEERS} \
+  --cache=${GETH_CACHE} \
+  --cache.gc=${GETH_CACHE_GC} \
+  --cache.database=${GETH_CACHE_DB} \
+  --cache.trie=${GETH_CACHE_TRIE} \
+  --authrpc.addr='0.0.0.0' \
+  --authrpc.vhosts='*'  \
+  --authrpc.jwtsecret="${GETH_JWTSECRET}" \
+  --http \
+  --http.addr='0.0.0.0' \
+  --http.api="${GETH_HTTP_API}" \
+  --http.vhosts='*' \
+  --metrics \
+  --metrics.addr='0.0.0.0' \
+  --ws \
+  --ws.addr='0.0.0.0' \
+  --ws.api="${GETH_WS_API}" \
+  --rpc.gascap=${GETH_RPC_GASCAP} \
+  --rpc.evmtimeout=${GETH_RPC_EVMTIMEOUT} \
+  --txlookuplimit=${GETH_TXLOOKUPLIMIT} \
+  --verbosity=${GETH_VERBOSITY} \
+  --log.vmodule="${GETH_VMODULE}" \
+  ${STATEDIFF_OPTS} \
+  ${GETH_OPTS} &
+
+geth_pid=$!
+wait $geth_pid
+
+if [[ "true" == "$CERC_KEEP_RUNNING_AFTER_GETH_EXIT" ]]; then
+  while [[ 1 -eq 1 ]]; do
+    sleep 60
+  done
+fi
@@ -0,0 +1,30 @@
+#!/bin/bash
+if [[ "true" == "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+
+ENR_OPTS=""
+if [[ -n "$LIGHTHOUSE_ENR_ADDRESS" ]]; then
+  ENR_OPTS="--enr-address $LIGHTHOUSE_ENR_ADDRESS"
+fi
+
+exec lighthouse bn \
+  --checkpoint-sync-url "$LIGHTHOUSE_CHECKPOINT_SYNC_URL" \
+  --checkpoint-sync-url-timeout ${LIGHTHOUSE_CHECKPOINT_SYNC_URL_TIMEOUT} \
+  --datadir "$LIGHTHOUSE_DATADIR" \
+  --debug-level $LIGHTHOUSE_DEBUG_LEVEL \
+  --disable-deposit-contract-sync \
+  --disable-upnp \
+  --enr-tcp-port $LIGHTHOUSE_NETWORK_PORT \
+  --enr-udp-port $LIGHTHOUSE_NETWORK_PORT \
+  --execution-endpoint "$LIGHTHOUSE_EXECUTION_ENDPOINT" \
+  --execution-jwt /etc/mainnet-eth/jwtsecret \
+  --http \
+  --http-address 0.0.0.0 \
+  --http-port $LIGHTHOUSE_HTTP_PORT \
+  --metrics \
+  --metrics-address=0.0.0.0 \
+  --metrics-port $LIGHTHOUSE_METRICS_PORT \
+  --network mainnet \
+  --port $LIGHTHOUSE_NETWORK_PORT \
+  $ENR_OPTS $LIGHTHOUSE_OPTS
@@ -25,7 +25,7 @@ GETH_CACHE_GC=25

 # --cache.trie
 GETH_CACHE_TRIE=15
-j
+
 # --datadir
 GETH_DATADIR="/data"

@@ -0,0 +1,57 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable set to skip contract deployment
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Skipping Nitro contracts deployment"
+  exit
+fi
+
+# Check and exit if a deployment already exists (on restarts)
+if [ -f ${nitro_addresses_file} ]; then
+  echo "${nitro_addresses_file} already exists, skipping Nitro contracts deployment"
+  cat ${nitro_addresses_file}
+  exit
+fi
+
+echo "Using ETH RPC endpoint ${CERC_ETH_RPC_ENDPOINT}"
+
+# Wait till ETH RPC endpoint is available with block number > 1
+retry_interval=5
+while true; do
+  block_number_hex=$(curl -s -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' ${CERC_ETH_RPC_ENDPOINT} | jq -r '.result')
+
+  # Check if the request call was successful
+  if [ $? -ne 0 ]; then
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+
+  # Convert hex to decimal
+  block_number_dec=$(printf %u ${block_number_hex})
+
+  # Check if block number is > 1 to avoid failures in the deployment
+  if [ "$block_number_dec" -ge 1 ]; then
+    echo "RPC endpoint is up"
+    break
+  else
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+done
+
+echo "Using CERC_PRIVATE_KEY_DEPLOYER from env"
+
+yarn test:deploy-contracts --chainUrl ${CERC_ETH_RPC_ENDPOINT} --key ${CERC_PRIVATE_KEY_DEPLOYER} --addressesFilePath ${nitro_addresses_file}
+cat ${nitro_addresses_file}
@@ -0,0 +1,10 @@
+{
+    "freeQueriesLimit": 10,
+    "freeQueriesList": [],
+    "queries": {
+      "getLogEvents": "50",
+      "getEthLogs": "50",
+      "getEthBlock": "50"
+    },
+    "mutations": {}
+}
@@ -0,0 +1,57 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+erc20_address_file="/app/deployment/erc20-address.json"
+
+echo ETH_RPC_URL=${CERC_ETH_RPC_ENDPOINT} > .env
+echo ACCOUNT_PRIVATE_KEY=${CERC_PRIVATE_KEY_DEPLOYER} >> .env
+
+# Check and keep container running if a deployment already exists (on restarts)
+if [ -f ${erc20_address_file} ]; then
+  echo "${erc20_address_file} already exists, skipping ERC20 contract deployment"
+  cat ${erc20_address_file}
+  
+  # Keep the container running
+  tail -f
+fi
+
+wait_for_chain_endpoint() {
+  # Wait till ETH RPC endpoint is available with block number > 1
+  retry_interval=5
+  while true; do
+    block_number_hex=$(curl -s -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' ${CERC_ETH_RPC_ENDPOINT} | jq -r '.result')
+
+    # Check if the request call was successful
+    if [ $? -ne 0 ]; then
+      echo "RPC endpoint ${CERC_ETH_RPC_ENDPOINT} not yet available, retrying in $retry_interval seconds..."
+      sleep $retry_interval
+      continue
+    fi
+
+    # Convert hex to decimal
+    block_number_dec=$(printf %u ${block_number_hex})
+
+    # Check if block number is > 1 to avoid failures in the deployment
+    if [ "$block_number_dec" -ge 1 ]; then
+      echo "RPC endpoint ${CERC_ETH_RPC_ENDPOINT} is up"
+      break
+    else
+      echo "RPC endpoint ${CERC_ETH_RPC_ENDPOINT} not yet available, retrying in $retry_interval seconds..."
+      sleep $retry_interval
+      continue
+    fi
+  done
+}
+
+wait_for_chain_endpoint
+
+echo "Using CERC_PRIVATE_KEY_DEPLOYER from env"
+
+yarn token:deploy:docker --file ${erc20_address_file}
+
+# Keep the container running
+tail -f
@@ -0,0 +1,79 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+nitro_addresses_file="/nitro/nitro-addresses.json"
+nitro_addresses_destination_file="/app/examples/token-erc20/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  # Create the required JSON and write it to a file
+  nitro_addresses_json=$(jq -n \
+    --arg na "$CERC_NA_ADDRESS" \
+    --arg vpa "$CERC_VPA_ADDRESS" \
+    --arg ca "$CERC_CA_ADDRESS" \
+    '.nitroAdjudicatorAddress = $na | .virtualPaymentAppAddress = $vpa | .consensusAppAddress = $ca')
+  echo "$nitro_addresses_json" > "${nitro_addresses_destination_file}"
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Using Nitro addresses from ${nitro_addresses_file}:"
+  cat "$nitro_addresses_file"
+  cat "$nitro_addresses_file" > "$nitro_addresses_destination_file"
+else
+  echo "Nitro addresses not available"
+  exit 1
+fi
+
+# Read ERC20 address from a file
+# Keep retrying until found
+erc20_address_file="/erc20/erc20-address.json"
+echo "Reading ERC20 address from ${erc20_address_file}"
+retry_interval=5
+while true; do
+  if [[ -e "$erc20_address_file" ]]; then
+    ERC20_CONTRACT=$(jq -r '.address' ${erc20_address_file})
+    break
+  else
+    echo "File not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+  fi
+done
+
+echo "Using CERC_PONDER_NITRO_PK from env for Nitro account"
+echo "Using CERC_PONDER_NITRO_CHAIN_PK (account with funds) from env for sending Nitro txs"
+echo "Using ${CERC_PONDER_NITRO_CHAIN_URL} as the RPC endpoint for Nitro txs"
+
+# If not set, check the mounted volume for relay peer id
+if [ -z "$CERC_RELAY_MULTIADDR" ]; then
+  echo "CERC_RELAY_MULTIADDR not provided, taking from the mounted volume"
+  CERC_RELAY_MULTIADDR="/dns4/mobymask-watcher-server/tcp/9090/ws/p2p/$(jq -r '.id' /peers/relay-id.json)"
+fi
+
+env_file='.env.local'
+echo "PONDER_TELEMETRY_DISABLED=true" > "$env_file"
+echo "PONDER_LOG_LEVEL=debug" >> "$env_file"
+echo "PONDER_CHAIN_ID=\"$CERC_PONDER_CHAIN_ID\"" >> "$env_file"
+echo "PONDER_RPC_URL_1=\"$CERC_PONDER_RPC_URL_1\"" >> "$env_file"
+echo "PONDER_NITRO_PK=\"$CERC_PONDER_NITRO_PK\"" >> "$env_file"
+echo "PONDER_NITRO_CHAIN_PK=\"$CERC_PONDER_NITRO_CHAIN_PK\"" >> "$env_file"
+echo "PONDER_NITRO_CHAIN_URL=\"$CERC_PONDER_NITRO_CHAIN_URL\"" >> "$env_file"
+echo "RELAY_MULTIADDR=\"$CERC_RELAY_MULTIADDR\"" >> "$env_file"
+echo "UPSTREAM_NITRO_ADDRESS=\"$CERC_UPSTREAM_NITRO_ADDRESS\"" >> "$env_file"
+echo "UPSTREAM_NITRO_MULTIADDR=\"$CERC_UPSTREAM_NITRO_MULTIADDR\"" >> "$env_file"
+echo "UPSTREAM_NITRO_PAY_AMOUNT=\"$CERC_UPSTREAM_NITRO_PAY_AMOUNT\"" >> "$env_file"
+echo "INDEXER_GQL_ENDPOINT=\"$CERC_INDEXER_GQL_ENDPOINT\"" >> "$env_file"
+echo "INDEXER_NITRO_ADDRESS=\"$CERC_INDEXER_NITRO_ADDRESS\"" >> "$env_file"
+echo "INDEXER_NITRO_PAY_AMOUNT=\"$CERC_INDEXER_NITRO_PAY_AMOUNT\"" >> "$env_file"
+echo "ERC20_CONTRACT=\"$ERC20_CONTRACT\"" >> "$env_file"
+
+cat "$env_file"
+
+# Keep the container running
+tail -f
@@ -0,0 +1,65 @@
+import { type Config, AppMode } from "@ponder/core";
+
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };
+
+export const config: Config = {
+  networks: [
+    {
+      name: "fixturenet",
+      chainId: Number(process.env.PONDER_CHAIN_ID),
+      rpcUrl: process.env.PONDER_RPC_URL_1,
+      maxRpcRequestConcurrency: 1,
+      pollingInterval: 5000,
+      payments: {
+        nitro: {
+          address: process.env.UPSTREAM_NITRO_ADDRESS!,
+          multiAddr: process.env.UPSTREAM_NITRO_MULTIADDR!,
+          fundingAmounts: {
+            // TODO: Pass amounts from env
+            directFund: "1000000000000",
+            virtualFund: "1000000000",
+          },
+        },
+        paidRPCMethods: [
+          "eth_getLogs",
+          "eth_getBlockByNumber",
+          "eth_getBlockByHash",
+        ],
+        amount: process.env.UPSTREAM_NITRO_PAY_AMOUNT!,
+      },
+    },
+  ],
+  contracts: [
+    {
+      name: "AdventureGold",
+      network: "fixturenet",
+      abi: "./abis/AdventureGold.json",
+      address: process.env.ERC20_CONTRACT,
+      startBlock: 1,
+      maxBlockRange: 100,
+    },
+  ],
+  options: {
+    mode: AppMode.Indexer,
+  },
+  nitro: {
+    privateKey: process.env.PONDER_NITRO_PK!,
+    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
+    chainUrl: process.env.PONDER_NITRO_CHAIN_URL!,
+    contractAddresses,
+    relayMultiAddr: process.env.RELAY_MULTIADDR!,
+    store: "./.ponder/nitro-db",
+    payments: {
+      cache: {
+        maxAccounts: 1000,
+        accountTTLInSecs: 1800,
+        maxVouchersPerAccount: 1000,
+        voucherTTLInSecs: 300,
+        maxPaymentChannels: 10000,
+        paymentChannelTTLInSecs: 1800,
+      },
+      ratesFile: "./base-rates-config.json",
+      requestTimeoutInSecs: 10,
+    },
+  },
+};
@@ -0,0 +1,64 @@
+import { type Config, AppMode } from "@ponder/core";
+
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };
+
+export const config: Config = {
+  networks: [
+    {
+      name: "fixturenet",
+      chainId: Number(process.env.PONDER_CHAIN_ID),
+      indexerUrl: process.env.INDEXER_GQL_ENDPOINT,
+      maxRpcRequestConcurrency: 1,
+      pollingInterval: 5000,
+      payments: {
+        nitro: {
+          address: process.env.INDEXER_NITRO_ADDRESS!,
+          fundingAmounts: {
+            // TODO: Pass amounts from env
+            directFund: "1000000000000",
+            virtualFund: "1000000000",
+          },
+        },
+        paidRPCMethods: [
+          "eth_getLogs",
+          "eth_getBlockByNumber",
+          "eth_getBlockByHash",
+        ],
+        amount: process.env.UPSTREAM_NITRO_PAY_AMOUNT!,
+      },
+    },
+  ],
+  contracts: [
+    {
+      name: "AdventureGold",
+      network: "fixturenet",
+      abi: "./abis/AdventureGold.json",
+      address: process.env.ERC20_CONTRACT,
+      startBlock: 1,
+      maxBlockRange: 100,
+    },
+  ],
+  options: {
+    mode: AppMode.Indexer,
+  },
+  nitro: {
+    privateKey: process.env.PONDER_NITRO_PK!,
+    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
+    chainUrl: process.env.PONDER_NITRO_CHAIN_URL!,
+    contractAddresses,
+    relayMultiAddr: process.env.RELAY_MULTIADDR!,
+    store: "./.ponder/nitro-db",
+    payments: {
+      cache: {
+        maxAccounts: 1000,
+        accountTTLInSecs: 1800,
+        maxVouchersPerAccount: 1000,
+        voucherTTLInSecs: 300,
+        maxPaymentChannels: 10000,
+        paymentChannelTTLInSecs: 1800,
+      },
+      ratesFile: "./base-rates-config.json",
+      requestTimeoutInSecs: 10,
+    },
+  },
+};
@@ -0,0 +1,58 @@
+import { type Config, AppMode } from "@ponder/core";
+
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };
+
+export const config: Config = {
+  networks: [
+    {
+      name: "fixturenet",
+      chainId: Number(process.env.PONDER_CHAIN_ID),
+    },
+  ],
+  contracts: [
+    {
+      name: "AdventureGold",
+      network: "fixturenet",
+      abi: "./abis/AdventureGold.json",
+      address: process.env.ERC20_CONTRACT,
+      startBlock: 1,
+      maxBlockRange: 100,
+    },
+  ],
+  options: {
+    mode: AppMode.Watcher,
+  },
+  indexer: {
+    gqlEndpoint: process.env.INDEXER_GQL_ENDPOINT,
+    payments: {
+      nitro: {
+        address: process.env.INDEXER_NITRO_ADDRESS,
+        fundingAmounts: {
+          directFund: "1000000000000",
+          virtualFund: "1000000000",
+        },
+      },
+      amount: process.env.INDEXER_NITRO_PAY_AMOUNT,
+    },
+  },
+  nitro: {
+    privateKey: process.env.PONDER_NITRO_PK!,
+    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
+    chainUrl: process.env.PONDER_NITRO_CHAIN_URL!,
+    contractAddresses,
+    relayMultiAddr: process.env.RELAY_MULTIADDR!,
+    store: "./.ponder/nitro-db",
+    payments: {
+      cache: {
+        maxAccounts: 1000,
+        accountTTLInSecs: 1800,
+        maxVouchersPerAccount: 1000,
+        voucherTTLInSecs: 300,
+        maxPaymentChannels: 10000,
+        paymentChannelTTLInSecs: 1800,
+      },
+      ratesFile: "./base-rates-config.json",
+      requestTimeoutInSecs: 10,
+    },
+  }
+};
@@ -0,0 +1,78 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_ETH_RPC_ENDPOINT="${CERC_ETH_RPC_ENDPOINT:-${DEFAULT_CERC_ETH_RPC_ENDPOINT}}"
+CERC_MOBYMASK_APP_BASE_URI="${CERC_MOBYMASK_APP_BASE_URI:-${DEFAULT_CERC_MOBYMASK_APP_BASE_URI}}"
+CERC_DEPLOYED_CONTRACT="${CERC_DEPLOYED_CONTRACT:-${DEFAULT_CERC_DEPLOYED_CONTRACT}}"
+
+# Check if CERC_DEPLOYED_CONTRACT environment variable set to skip contract deployment
+if [ -n "$CERC_DEPLOYED_CONTRACT" ]; then
+  echo "CERC_DEPLOYED_CONTRACT is set to '$CERC_DEPLOYED_CONTRACT'"
+  echo "Skipping contract deployment"
+  exit 0
+fi
+
+echo "Using ETH RPC endpoint ${CERC_ETH_RPC_ENDPOINT}"
+
+# Wait till ETH RPC endpoint is available with block number > 1
+retry_interval=5
+while true; do
+  block_number_hex=$(curl -s -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' ${CERC_ETH_RPC_ENDPOINT} | jq -r '.result')
+
+  # Check if the request call was successful
+  if [ $? -ne 0 ]; then
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+
+  # Convert hex to decimal
+  block_number_dec=$(printf %u ${block_number_hex})
+
+  # Check if block number is > 1 to avoid failures in the deployment
+  if [ "$block_number_dec" -ge 1 ]; then
+    echo "RPC endpoint is up"
+    break
+  else
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+done
+
+echo "Using CERC_PRIVATE_KEY_DEPLOYER from env"
+
+# Create the required JSON and write it to a file
+secrets_file="secrets.json"
+secrets_json=$(jq -n \
+  --arg privateKey "$CERC_PRIVATE_KEY_DEPLOYER" \
+  --arg rpcUrl "$CERC_ETH_RPC_ENDPOINT" \
+  --arg baseURI "$CERC_MOBYMASK_APP_BASE_URI" \
+  '.privateKey = $privateKey | .rpcUrl = $rpcUrl | .baseURI = $baseURI')
+echo "$secrets_json" > "${secrets_file}"
+
+export RPC_URL="${CERC_ETH_RPC_ENDPOINT}"
+
+# Check and exit if a deployment already exists (on restarts)
+if [ -f ./config.json ]; then
+  echo "config.json already exists, checking the contract deployment"
+
+  # Read JSON file
+  deployment_details=$(cat config.json)
+  deployed_contract=$(echo "$deployment_details" | jq -r '.address')
+
+  cd ../hardhat
+  if yarn verifyDeployment --network optimism --contract "${deployed_contract}"; then
+    echo "Deployment verfication successful"
+    cd ../server
+  else
+    echo "Deployment verfication failed, please clear MobyMask deployment volume before starting"
+    exit 1
+  fi
+fi
+
+npm run deployAndGenerateInvite
@@ -1,58 +0,0 @@
-#!/bin/bash
-
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_NA_ADDRESS="${CERC_NA_ADDRESS:-${DEFAULT_CERC_NA_ADDRESS}}"
-CERC_VPA_ADDRESS="${CERC_VPA_ADDRESS:-${DEFAULT_CERC_VPA_ADDRESS}}"
-CERC_CA_ADDRESS="${CERC_CA_ADDRESS:-${DEFAULT_CERC_CA_ADDRESS}}"
-
-NITRO_ADDRESSES_FILE_PATH="/nitro/nitro-addresses.json"
-
-# Check if CERC_NA_ADDRESS environment variable set to skip contract deployment
-if [ -n "$CERC_NA_ADDRESS" ]; then
-  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
-  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
-  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
-  echo "Using the above addresses and skipping Nitro contracts deployment"
-
-  # Create the required JSON and write it to a file
-  nitro_addresses_json=$(jq -n \
-    --arg na "$CERC_NA_ADDRESS" \
-    --arg vpa "$CERC_VPA_ADDRESS" \
-    --arg ca "$CERC_CA_ADDRESS" \
-    '.nitroAdjudicatorAddress = $na | .virtualPaymentAppAddress = $vpa | .consensusAppAddress = $ca')
-  echo "$nitro_addresses_json" > "${NITRO_ADDRESSES_FILE_PATH}"
-
-  exit
-fi
-
-# Check and exit if a deployment already exists (on restarts)
-if [ -f ${NITRO_ADDRESSES_FILE_PATH} ]; then
-  echo "${NITRO_ADDRESSES_FILE_PATH} already exists, skipping Nitro contracts deployment"
-  exit
-fi
-
-echo "Using L2 RPC endpoint ${CERC_L2_GETH_RPC}"
-
-if [ -n "$CERC_L1_ACCOUNTS_CSV_URL" ] && \
-  l1_accounts_response=$(curl -L --write-out '%{http_code}' --silent --output /dev/null "$CERC_L1_ACCOUNTS_CSV_URL") && \
-  [ "$l1_accounts_response" -eq 200 ];
-then
-  echo "Fetching L1 account credentials using provided URL"
-  mkdir -p /geth-accounts
-  wget -O /geth-accounts/accounts.csv "$CERC_L1_ACCOUNTS_CSV_URL"
-
-  # Read the private key of an L1 account to deploy contract
-  CERC_PRIVATE_KEY_DEPLOYER=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
-else
-  echo "Couldn't fetch L1 account credentials, using CERC_PRIVATE_KEY_DEPLOYER from env"
-fi
-
-echo "RPC_URL=${CERC_L2_GETH_RPC}" > .env
-echo "NITRO_ADDRESSES_FILE_PATH=${NITRO_ADDRESSES_FILE_PATH}" >> .env
-echo "PRIVATE_KEY=${CERC_PRIVATE_KEY_DEPLOYER}" >> .env
-
-yarn ts-node --esm deploy-nitro-contracts.ts
@@ -1,49 +0,0 @@
-import 'dotenv/config';
-import fs from 'fs';
-import { providers, Wallet } from 'ethers';
-import { deployContracts } from '@cerc-io/nitro-util';
-
-async function main () {
-  const rpcURL = process.env.RPC_URL;
-  const addressesFilePath = process.env.NITRO_ADDRESSES_FILE_PATH;
-  const deployerKey = process.env.PRIVATE_KEY;
-
-  if (!rpcURL) {
-    console.log('RPC_URL not set, skipping deployment');
-    return;
-  }
-
-  if (!addressesFilePath) {
-    console.log('NITRO_ADDRESSES_FILE_PATH not set, skipping deployment');
-    return;
-  }
-
-  if (!deployerKey) {
-    console.log('PRIVATE_KEY not set, skipping deployment');
-    return;
-  }
-
-  const provider = new providers.JsonRpcProvider(process.env.RPC_URL);
-  const signer = new Wallet(deployerKey, provider);
-
-  const [
-    nitroAdjudicatorAddress,
-    virtualPaymentAppAddress,
-    consensusAppAddress
-  ] = await deployContracts(signer as any);
-
-  const output = {
-    nitroAdjudicatorAddress,
-    virtualPaymentAppAddress,
-    consensusAppAddress
-  };
-
-  fs.writeFileSync(addressesFilePath, JSON.stringify(output, null, 2));
-  console.log('Nitro contracts deployed, addresses written to', addressesFilePath);
-  console.log('Result:', JSON.stringify(output, null, 2));
-}
-
-main()
-  .catch((err) => {
-    console.log(err);
-  });
@@ -11,21 +11,36 @@ CERC_RELAY_NODES="${CERC_RELAY_NODES:-${DEFAULT_CERC_RELAY_NODES}}"
 CERC_DENY_MULTIADDRS="${CERC_DENY_MULTIADDRS:-${DEFAULT_CERC_DENY_MULTIADDRS}}"
 CERC_PUBSUB="${CERC_PUBSUB:-${DEFAULT_CERC_PUBSUB}}"
 CERC_GOSSIPSUB_DIRECT_PEERS="${CERC_GOSSIPSUB_DIRECT_PEERS:-${DEFAULT_CERC_GOSSIPSUB_DIRECT_PEERS}}"
+CERC_APP_WATCHER_URL="${CERC_APP_WATCHER_URL:-${DEFAULT_CERC_APP_WATCHER_URL}}"
+CERC_SNAP_URL="${CERC_SNAP_URL:-${DEFAULT_CERC_SNAP_URL}}"
+
+# If not set (or []), check the mounted volume for relay peer id
+if [ -z "$CERC_RELAY_NODES" ] || [ "$CERC_RELAY_NODES" = "[]" ]; then
+  echo "CERC_RELAY_NODES not provided, taking from the mounted volume"
+  CERC_RELAY_NODES="[\"/ip4/127.0.0.1/tcp/9090/ws/p2p/$(jq -r '.id' /peers/relay-id.json)\"]"
+fi

 echo "Using CERC_RELAY_NODES $CERC_RELAY_NODES"

 if [ -z "$CERC_DEPLOYED_CONTRACT" ]; then
-  echo "CERC_DEPLOYED_CONTRACT not set"
-  exit 1
+  # Use config from mounted volume (when running web-app along with watcher stack)
+  echo "Taking config for deployed contract from mounted volume"
+  while [ ! -f /server/config.json ]; do
+    echo "Config not found, retrying in 5 seconds..."
+    sleep 5
+  done
+
+  # Get deployed contract address and chain id
+  CERC_DEPLOYED_CONTRACT=$(jq -r '.address' /server/config.json | tr -d '"')
+  CERC_CHAIN_ID=$(jq -r '.chainId' /server/config.json)
 else
  echo "Using CERC_DEPLOYED_CONTRACT ${CERC_DEPLOYED_CONTRACT} from env as the MobyMask contract address"
 fi

-# Checkout to the required release/branch
-cd /app
-git checkout $CERC_RELEASE
+nitro_addresses_file="/nitro/nitro-addresses.json"
+nitro_addresses_destination_file="/app/src/utils/nitro-addresses.json"

-# Check if CERC_NA_ADDRESS is set
+# Check if CERC_NA_ADDRESS environment variable is set
 if [ -n "$CERC_NA_ADDRESS" ]; then
  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
@@ -38,24 +53,31 @@ if [ -n "$CERC_NA_ADDRESS" ]; then
    --arg vpa "$CERC_VPA_ADDRESS" \
    --arg ca "$CERC_CA_ADDRESS" \
    '.nitroAdjudicatorAddress = $na | .virtualPaymentAppAddress = $vpa | .consensusAppAddress = $ca')
-  echo "$nitro_addresses_json" > /app/src/utils/nitro-addresses.json
+  echo "$nitro_addresses_json" > "${nitro_addresses_destination_file}"
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Using Nitro addresses from ${nitro_addresses_file}:"
+  cat "$nitro_addresses_file"
+  cat "$nitro_addresses_file" > "$nitro_addresses_destination_file"
 else
-  echo "Nitro addresses not provided"
+  echo "Nitro addresses not available"
  exit 1
 fi

 # Export config values in a json file
-jq --arg address "$CERC_DEPLOYED_CONTRACT" \
+app_config_file="/app/src/utils/config.json"
+app_config_json=$(jq -n \
+  --arg name "MobyMask" \
+  --argjson enableDebugInfo true \
+  --arg address "$CERC_DEPLOYED_CONTRACT" \
  --argjson chainId "$CERC_CHAIN_ID" \
  --argjson relayNodes "$CERC_RELAY_NODES" \
  --argjson denyMultiaddrs "$CERC_DENY_MULTIADDRS" \
  --arg pubsub "$CERC_PUBSUB" \
  --argjson directPeers "$CERC_GOSSIPSUB_DIRECT_PEERS" \
-  '.address = $address | .chainId = $chainId | .relayNodes = $relayNodes | .peer.denyMultiaddrs = $denyMultiaddrs | .peer.pubsub = $pubsub | .peer.directPeers = $directPeers' \
-  /app/src/mobymask-app-config.json > /app/src/utils/config.json
-
-yarn install
+  '.name = $name | .address = $address | .chainId = $chainId | .relayNodes = $relayNodes | .peer.enableDebugInfo = $enableDebugInfo | .peer.denyMultiaddrs = $denyMultiaddrs | .peer.pubsub = $pubsub | .peer.directPeers = $directPeers')
+echo "$app_config_json" > "${app_config_file}"

+REACT_APP_DEBUG_PEER=true \
 REACT_APP_WATCHER_URI="$CERC_APP_WATCHER_URL/graphql" \
 REACT_APP_PAY_TO_NITRO_ADDRESS="$CERC_PAYMENT_NITRO_ADDRESS" \
 REACT_APP_SNAP_ORIGIN="local:$CERC_SNAP_URL" \
@@ -1,5 +1,17 @@
 # Defaults

+# ETH RPC endpoint used for contract(s) deployment
+DEFAULT_CERC_ETH_RPC_ENDPOINT="http://fixturenet-eth-geth-1:8545"
+
+# ETH RPC endpoint used for queries in the watcher
+DEFAULT_CERC_ETH_RPC_QUERY_ENDPOINT="http://ipld-eth-server-1:8081"
+
+# ETH RPC endpoint used for mutations in the watcher
+DEFAULT_CERC_ETH_RPC_MUTATION_ENDPOINT="http://fixturenet-eth-geth-1:8545"
+
+# ETH endpoint used by watcher's Nitro node
+DEFAULT_CERC_NITRO_CHAIN_URL="http://fixturenet-eth-geth-1:8546"
+
 # Set of relay peers to connect to from the relay node
 DEFAULT_CERC_RELAY_PEERS=[]

@@ -17,7 +29,13 @@ DEFAULT_CERC_ENABLE_PEER_L2_TXS=true
 DEFAULT_CERC_DEPLOYED_CONTRACT=

 # Chain ID is used by mobymask web-app for txs
-DEFAULT_CERC_CHAIN_ID=42069
+DEFAULT_CERC_CHAIN_ID=1212
+
+# Watcher endpoint used by the web-app
+DEFAULT_CERC_APP_WATCHER_URL="http://localhost:3001"
+
+# MobyMask snap URL to be used by the web-app
+DEFAULT_CERC_SNAP_URL=http://localhost:8080

 # Set of relay nodes to be used by web-apps
 DEFAULT_CERC_RELAY_NODES=[]
@@ -31,7 +49,5 @@ DEFAULT_CERC_PUBSUB=""
 # Set of direct peers to be used when pubsub is set to gossipsub
 DEFAULT_CERC_GOSSIPSUB_DIRECT_PEERS=[]

-# Set deployed Nitro addresses to avoid deploying them in the stack
-DEFAULT_CERC_NA_ADDRESS=
-DEFAULT_CERC_VPA_ADDRESS=
-DEFAULT_CERC_CA_ADDRESS=
+# Whether to enable payments to upstream ETH server
+DEFAULT_CERC_ENABLE_UPSTREAM_PAYMENTS=true
@@ -5,21 +5,22 @@ if [ -n "$CERC_SCRIPT_DEBUG" ]; then
  set -x
 fi

-CERC_L2_GETH_RPC="${CERC_L2_GETH_RPC:-${DEFAULT_CERC_L2_GETH_RPC}}"
-
+CERC_ETH_RPC_QUERY_ENDPOINT="${CERC_ETH_RPC_QUERY_ENDPOINT:-${DEFAULT_CERC_ETH_RPC_QUERY_ENDPOINT}}"
+CERC_ETH_RPC_MUTATION_ENDPOINT="${CERC_ETH_RPC_MUTATION_ENDPOINT:-${DEFAULT_CERC_ETH_RPC_MUTATION_ENDPOINT}}"
+CERC_NITRO_CHAIN_URL="${CERC_NITRO_CHAIN_URL:-${DEFAULT_CERC_NITRO_CHAIN_URL}}"
 CERC_RELAY_PEERS="${CERC_RELAY_PEERS:-${DEFAULT_CERC_RELAY_PEERS}}"
 CERC_DENY_MULTIADDRS="${CERC_DENY_MULTIADDRS:-${DEFAULT_CERC_DENY_MULTIADDRS}}"
 CERC_PUBSUB="${CERC_PUBSUB:-${DEFAULT_CERC_PUBSUB}}"
 CERC_RELAY_ANNOUNCE_DOMAIN="${CERC_RELAY_ANNOUNCE_DOMAIN:-${DEFAULT_CERC_RELAY_ANNOUNCE_DOMAIN}}"
 CERC_ENABLE_PEER_L2_TXS="${CERC_ENABLE_PEER_L2_TXS:-${DEFAULT_CERC_ENABLE_PEER_L2_TXS}}"
 CERC_DEPLOYED_CONTRACT="${CERC_DEPLOYED_CONTRACT:-${DEFAULT_CERC_DEPLOYED_CONTRACT}}"
-
-nitro_addresses_file="/nitro/nitro-addresses.json"
-nitro_addresses_destination_file="./src/nitro-addresses.json"
+CERC_ENABLE_UPSTREAM_PAYMENTS="${CERC_ENABLE_UPSTREAM_PAYMENTS:-${DEFAULT_CERC_ENABLE_UPSTREAM_PAYMENTS}}"

 watcher_keys_dir="./keys"

-echo "Using L2 RPC endpoint ${CERC_L2_GETH_RPC}"
+echo "Using RPC query endpoint ${CERC_ETH_RPC_QUERY_ENDPOINT}"
+echo "Using RPC mutation endpoint ${CERC_ETH_RPC_MUTATION_ENDPOINT}"
+echo "Using Nitro chain URL ${CERC_NITRO_CHAIN_URL}"

 # Use public domain for relay multiaddr in peer config if specified
 # Otherwise, use the docker container's host IP
@@ -37,20 +38,37 @@ else
  CONTRACT_ADDRESS=$(jq -r '.address' /server/config.json | tr -d '"')
 fi

-# Copy the deployed Nitro addresses to the required path
-if [ -f "$nitro_addresses_file" ]; then
-  cat "$nitro_addresses_file" > "$nitro_addresses_destination_file"
-  echo "Nitro addresses set to ${nitro_addresses_destination_file}"
+nitro_addresses_file="/nitro/nitro-addresses.json"
+nitro_addresses_destination_file="./src/nitro-addresses.json"

-  # Build after setting the Nitro addresses
-  yarn build
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  # Create the required JSON and write it to a file
+  nitro_addresses_json=$(jq -n \
+    --arg na "$CERC_NA_ADDRESS" \
+    --arg vpa "$CERC_VPA_ADDRESS" \
+    --arg ca "$CERC_CA_ADDRESS" \
+    '.nitroAdjudicatorAddress = $na | .virtualPaymentAppAddress = $vpa | .consensusAppAddress = $ca')
+  echo "$nitro_addresses_json" > "${nitro_addresses_destination_file}"
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Using Nitro addresses from ${nitro_addresses_file}:"
+  cat "$nitro_addresses_file"
+  cat "$nitro_addresses_file" > "$nitro_addresses_destination_file"
 else
-  echo "File ${nitro_addresses_file} does not exist"
+  echo "Nitro addresses not available"
  exit 1
 fi

+# Build after setting the Nitro addresses
+yarn build
+
 echo "Using CERC_PRIVATE_KEY_PEER (account with funds) from env for sending txs to L2"
-echo "Using CERC_PRIVATE_KEY_NITRO from env for Nitro account"
+echo "Using CERC_WATCHER_NITRO_PK from env for Nitro account"

 if [ -n "$CERC_PEER_ID" ]; then
  echo "Using CERC_PEER_ID ${CERC_PEER_ID} from env for watcher fixture"
@@ -107,24 +125,39 @@ else
  CONSENSUS_PRIVATE_KEY=''
 fi

+if [ "$CERC_ENABLE_UPSTREAM_PAYMENTS" = true ]; then
+  UPSTREAM_NITRO_ADDRESS=${CERC_UPSTREAM_NITRO_ADDRESS}
+  UPSTREAM_NITRO_MULTIADDR=${CERC_UPSTREAM_NITRO_MULTIADDR}
+  UPSTREAM_NITRO_PAY_AMOUNT=${CERC_UPSTREAM_NITRO_PAY_AMOUNT}
+else
+  UPSTREAM_NITRO_ADDRESS=""
+  UPSTREAM_NITRO_MULTIADDR=""
+  UPSTREAM_NITRO_PAY_AMOUNT=""
+fi
+
 # Read in the config template TOML file and modify it
 WATCHER_CONFIG_TEMPLATE=$(cat environments/watcher-config-template.toml)
 WATCHER_CONFIG=$(echo "$WATCHER_CONFIG_TEMPLATE" | \
  sed -E "s|REPLACE_WITH_CERC_RELAY_PEERS|${CERC_RELAY_PEERS}|g; \
-          s|REPLACE_WITH_CERC_DENY_MULTIADDRS|${CERC_DENY_MULTIADDRS}|g; \
-          s/REPLACE_WITH_CERC_PUBSUB/${CERC_PUBSUB}/g; \
-          s/REPLACE_WITH_CERC_RELAY_ANNOUNCE_DOMAIN/${CERC_RELAY_ANNOUNCE_DOMAIN}/g; \
-          s|REPLACE_WITH_CERC_RELAY_MULTIADDR|${CERC_RELAY_MULTIADDR}|g; \
-          s|REPLACE_WITH_PEER_ID_FILE|${PEER_ID_FILE}|g; \
-          s/REPLACE_WITH_CERC_ENABLE_PEER_L2_TXS/${CERC_ENABLE_PEER_L2_TXS}/g; \
-          s/REPLACE_WITH_CERC_PRIVATE_KEY_PEER/${CERC_PRIVATE_KEY_PEER}/g; \
-          s/REPLACE_WITH_CERC_PRIVATE_KEY_NITRO/${CERC_PRIVATE_KEY_NITRO}/g; \
-          s/REPLACE_WITH_CONTRACT_ADDRESS/${CONTRACT_ADDRESS}/g; \
-          s/REPLACE_WITH_CONSENSUS_ENABLED/${CONSENSUS_ENABLED}/g; \
-          s/REPLACE_WITH_CONSENSUS_PUBLIC_KEY/${CONSENSUS_PUBLIC_KEY}/g; \
-          s/REPLACE_WITH_CONSENSUS_PRIVATE_KEY/${CONSENSUS_PRIVATE_KEY}/g; \
-          s|REPLACE_WITH_WATCHER_PARTY_PEERS_FILE|${WATCHER_PARTY_PEERS_FILE}|g; \
-          s|REPLACE_WITH_CERC_L2_GETH_RPC_ENDPOINT|${CERC_L2_GETH_RPC}| ")
+    s|REPLACE_WITH_CERC_DENY_MULTIADDRS|${CERC_DENY_MULTIADDRS}|g; \
+    s/REPLACE_WITH_CERC_PUBSUB/${CERC_PUBSUB}/g; \
+    s/REPLACE_WITH_CERC_RELAY_ANNOUNCE_DOMAIN/${CERC_RELAY_ANNOUNCE_DOMAIN}/g; \
+    s|REPLACE_WITH_CERC_RELAY_MULTIADDR|${CERC_RELAY_MULTIADDR}|g; \
+    s|REPLACE_WITH_PEER_ID_FILE|${PEER_ID_FILE}|g; \
+    s/REPLACE_WITH_CERC_ENABLE_PEER_L2_TXS/${CERC_ENABLE_PEER_L2_TXS}/g; \
+    s/REPLACE_WITH_CERC_PRIVATE_KEY_PEER/${CERC_PRIVATE_KEY_PEER}/g; \
+    s/REPLACE_WITH_CERC_WATCHER_NITRO_PK/${CERC_WATCHER_NITRO_PK}/g; \
+    s/REPLACE_WITH_CONTRACT_ADDRESS/${CONTRACT_ADDRESS}/g; \
+    s|REPLACE_WITH_CERC_NITRO_CHAIN_URL|${CERC_NITRO_CHAIN_URL}|g; \
+    s/REPLACE_WITH_CONSENSUS_ENABLED/${CONSENSUS_ENABLED}/g; \
+    s/REPLACE_WITH_CONSENSUS_PUBLIC_KEY/${CONSENSUS_PUBLIC_KEY}/g; \
+    s/REPLACE_WITH_CONSENSUS_PRIVATE_KEY/${CONSENSUS_PRIVATE_KEY}/g; \
+    s|REPLACE_WITH_WATCHER_PARTY_PEERS_FILE|${WATCHER_PARTY_PEERS_FILE}|g; \
+    s|REPLACE_WITH_CERC_ETH_RPC_QUERY_ENDPOINT|${CERC_ETH_RPC_QUERY_ENDPOINT}|g; \
+    s|REPLACE_WITH_CERC_ETH_RPC_MUTATION_ENDPOINT|${CERC_ETH_RPC_MUTATION_ENDPOINT}|g; \
+    s/REPLACE_WITH_UPSTREAM_NITRO_ADDRESS/${UPSTREAM_NITRO_ADDRESS}/g; \
+    s|REPLACE_WITH_UPSTREAM_NITRO_MULTIADDR|${UPSTREAM_NITRO_MULTIADDR}|g; \
+    s/REPLACE_WITH_UPSTREAM_NITRO_PAY_AMOUNT/${UPSTREAM_NITRO_PAY_AMOUNT}/ ")

 # Write the modified content to a new file
 echo "$WATCHER_CONFIG" > environments/local.toml
@@ -19,6 +19,9 @@
  # Use -1 for skipping check on block range.
  maxEventsBlockRange = -1

+  # Flag to specify whether RPC endpoint supports block hash as block tag parameter
+  rpcSupportsBlockHashParam = true
+
  [server.p2p]
    enableRelay = true
    enablePeer = true
@@ -41,14 +44,18 @@
      pubsub = 'REPLACE_WITH_CERC_PUBSUB'
      enableDebugInfo = true
      enableL2Txs = REPLACE_WITH_CERC_ENABLE_PEER_L2_TXS
+      pingInterval = 4000
+      pingTimeout = 1500
+      maxRelayConnections = 10

      [server.p2p.peer.l2TxsConfig]
        privateKey = 'REPLACE_WITH_CERC_PRIVATE_KEY_PEER'
        contractAddress = 'REPLACE_WITH_CONTRACT_ADDRESS'

    [server.p2p.nitro]
+      chainUrl = 'REPLACE_WITH_CERC_NITRO_CHAIN_URL'
      store = './out/nitro-db'
-      privateKey = 'REPLACE_WITH_CERC_PRIVATE_KEY_NITRO'
+      privateKey = 'REPLACE_WITH_CERC_WATCHER_NITRO_PK'
      chainPrivateKey = 'REPLACE_WITH_CERC_PRIVATE_KEY_PEER'

      [server.p2p.nitro.payments]
@@ -67,7 +74,7 @@
      enabled = REPLACE_WITH_CONSENSUS_ENABLED
      publicKey = 'REPLACE_WITH_CONSENSUS_PUBLIC_KEY'
      privateKey = 'REPLACE_WITH_CONSENSUS_PRIVATE_KEY'
-      watcherPartyFile = 'REPLACE_WITH_WATCHER_PARTY_PEERS_FILE'
+      watcherPartyPeersFile = 'REPLACE_WITH_WATCHER_PARTY_PEERS_FILE'

 [metrics]
  host = "0.0.0.0"
@@ -88,8 +95,20 @@
 [upstream]
  [upstream.ethServer]
    gqlApiEndpoint = "http://ipld-eth-server:8083/graphql"
-    rpcProviderEndpoint = "REPLACE_WITH_CERC_L2_GETH_RPC_ENDPOINT"
-    blockDelayInMilliSecs = 60000
+    rpcProviderEndpoint = 'REPLACE_WITH_CERC_ETH_RPC_QUERY_ENDPOINT'
+    rpcProviderMutationEndpoint = 'REPLACE_WITH_CERC_ETH_RPC_MUTATION_ENDPOINT'
+
+    [upstream.ethServer.payments]
+      paidRPCMethods = ["eth_getBlockByHash", "eth_getBlockByNumber", "eth_getStorageAt"]
+      amount = 'REPLACE_WITH_UPSTREAM_NITRO_PAY_AMOUNT'
+
+      [upstream.ethServer.payments.nitro]
+        address = 'REPLACE_WITH_UPSTREAM_NITRO_ADDRESS'
+        multiAddr = 'REPLACE_WITH_UPSTREAM_NITRO_MULTIADDR'
+
+        [upstream.ethServer.payments.nitro.fundingAmounts]
+          directFund = "1000000000000"
+          virtualFund = "1000000000"

  [upstream.cache]
    name = "requests"
@@ -101,3 +120,4 @@
  maxCompletionLagInSecs = 300
  jobDelayInMilliSecs = 100
  eventsInBatch = 50
+  blockDelayInMilliSecs = 60000
@@ -2,4 +2,4 @@
 # Build a local version of the task executor for act-runner
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
-docker build -t cerc/act-runner-task-executor:local -f ${CERC_REPO_BASE_DIR}/hosting/gitea/Dockerfile.task-executor ${build_command_args} ${SCRIPT_DIR}
+docker build -t cerc/act-runner-task-executor:local -f ${CERC_REPO_BASE_DIR}/hosting/act-runner/Dockerfile.task-executor ${build_command_args} ${SCRIPT_DIR}
@@ -13,6 +13,7 @@ NOW=${1:-`date +%s`}

 lcli \
  change-genesis-time \
+  --testnet-dir $TESTNET_DIR \
  $TESTNET_DIR/genesis.ssz \
  $NOW

@@ -20,21 +20,24 @@ if [[ $? -ne 0 ]]; then
  exit 1
 fi

-# Stop geth.
-echo -n "Exporting ethdb.... "
 GETH_CONTAINER=`docker ps -q -f "name=${CERC_SO_COMPOSE_PROJECT}-fixturenet-eth-geth-2-1"`
 if [[ -z "$GETH_CONTAINER" ]]; then
  echo "not found"
  exit 1
 fi

+# Make sure we have the necessary tools
+docker exec $GETH_CONTAINER sh -c 'apk add --no-cache jq curl'
+
+# Gather metadata.
 docker exec $GETH_CONTAINER sh -c 'rm -rf /root/tmp && mkdir -p /root/tmp/export'
 docker exec $GETH_CONTAINER sh -c 'ln -s /opt/testnet/build/el/geth.json /root/tmp/export/genesis.json && ln -s /root/ethdata /root/tmp/export/'
 docker exec $GETH_CONTAINER sh -c 'cat /root/tmp/export/genesis.json | jq ".config" > /root/tmp/export/genesis.config.json'
-
-# Stop geth and zip up ethdb.
 docker exec $GETH_CONTAINER sh -c 'curl -s --location "localhost:8545" --header "Content-Type: application/json" --data "{\"jsonrpc\": \"2.0\", \"id\": 1, \"method\": \"eth_getBlockByNumber\", \"params\": [\"0x0\", false]}" > /root/tmp/export/eth_getBlockByNumber_0x0.json'
 docker exec $GETH_CONTAINER sh -c 'curl -s --location "localhost:8545" --header "Content-Type: application/json" --data "{\"jsonrpc\": \"2.0\", \"id\": 1, \"method\": \"eth_blockNumber\", \"params\": []}" > /root/tmp/export/eth_blockNumber.json'
+
+# Stop geth and zip up ethdb.
+echo -n "Exporting ethdb.... "
 docker exec $GETH_CONTAINER sh -c "killall geth && sleep 2 && tar chzf /root/tmp/ethdb.tgz -C /root/tmp/export ."

 # Copy ethdb to host.
@@ -0,0 +1,16 @@
+FROM golang:1.21-bullseye AS builder
+
+# Copy files into image
+WORKDIR /app
+COPY . .
+
+# Build the binary
+RUN go build -v -o nitro .
+
+# Reduce image size
+FROM debian:bullseye-slim
+RUN apt-get update
+RUN apt-get install -y ca-certificates jq netcat
+RUN rm -rf /var/lib/apt/lists/*
+WORKDIR /app
+COPY --from=builder /app/nitro .
@@ -0,0 +1,8 @@
+#!/usr/bin/env bash
+# Build cerc/go-nitro
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/go-nitro:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/go-nitro
@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+# Build the laconic.com image
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+docker build -t cerc/laconic-dot-com:local -f ${CERC_REPO_BASE_DIR}/laconic.com/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/laconic.com
@@ -54,8 +54,10 @@ RUN yarn global add @cerc-io/laconic-registry-cli

 # Add scripts
 RUN mkdir /scripts
+RUN mkdir /scripts/demo-records
 ENV PATH="${PATH}:/scripts"
 COPY ./create-demo-records.sh /scripts
+COPY ./demo-records /scripts/demo-records
 COPY ./import-key.sh /scripts
 COPY ./import-address.sh /scripts

@@ -4,26 +4,26 @@ set -e
 if [ -n "$CERC_SCRIPT_DEBUG" ]; then
  set -x
 fi
+
 registry_command="laconic cns"
-record_1_filename=demo-record-1.yml
-cat <<EOF > ${record_1_filename}
-record:
-  type: WebsiteRegistrationRecord
-  url: 'https://cerc.io'
-  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
-  build_artifact_cid: QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
-  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
-  version: 1.0.23
-EOF
+demo_records_dir="scripts/demo-records"
+
 # Check we have funds
 funds_response=$(${registry_command} account get --address $(cat my-address.txt))
 funds_balance=$(echo ${funds_response} | jq -r .[0].balance[0].quantity)
 echo "Balance is: ${funds_balance}"
+
 # Create a bond
 bond_create_result=$(${registry_command} bond create --type aphoton --quantity 1000000000)
 bond_id=$(echo ${bond_create_result} | jq -r .bondId)
 echo "Created bond with id: ${bond_id}"
-# Publish a demo record
-publish_response=$(${registry_command} record publish --filename ${record_1_filename} --bond-id ${bond_id})
-published_record_id=$(echo ${publish_response} | jq -r .id)
-echo "Published ${record_1_filename} with id: ${published_record_id}"
+
+## Publish the demo records
+if [ -d $demo_records_dir ]; then
+  for demo_record in "${demo_records_dir}"/*; do
+    publish_response=$(${registry_command} record publish --filename ${demo_record} --bond-id ${bond_id})
+    published_record_id=$(echo ${publish_response} | jq -r .id)
+    echo "Published ${demo_record} with id: ${published_record_id}"
+    cat ${demo_record}
+  done
+fi
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://hello-urbit.laconic.com'
+  repo_registration_record_cid: QmTZQ8ZJS6mALjEM2wY71msFno6zzxFftVCiZELj9xREPx
+  build_artifact_cid: '~lostex-rabdur-labtul-moltev/hello-urbit'
+  tls_cert_cid: QmR1acEmQt7Tjmhp9cFtymie2eFcrHURQKt9kGto1TQTW1
+  version: 0.2.4
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://dev-hello-urbit.laconic.com'
+  repo_registration_record_cid: QmPbKkK7gKojnGAgKAE6bK5qBY8BcYp2YDB1e4b28NxvVv
+  build_artifact_cid: '~lostex-rabdur-labtul-moltev/hello-urbit-dev'
+  tls_cert_cid: QmWbCv4k9Q9P6XptHNJN6EupDyKVLSLRV6W6T2sAYkfBxr
+  version: 0.2.5
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://app.osmosis.zone'
+  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
+  build_artifact_cid: '~larryx-woldyr/osmosis:latest'
+  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
+  version: 1.3.5
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://dev.osmosis.zone'
+  repo_registration_record_cid: QmPbKkK7gKojnGAgKAE6bK5qBY8BcYp2YDB1e4b28NxvVv
+  build_artifact_cid: '~larryx-woldyr/osmosis:dev'
+  tls_cert_cid: QmWbCv4k9Q9P6XptHNJN6EupDyKVLSLRV6W6T2sAYkfBxr
+  version: 1.3.6
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://pwa-1-1-3.iglootools.xyz'
+  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
+  build_artifact_cid: https://ipfs.io/ipfs/QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
+  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
+  version: 1.1.3
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://pwa-1-2-3.iglootools.xyz'
+  repo_registration_record_cid: QmVjYQ59z3fuKfYUV1aXhDR82JAKxdqB5JMPfUsHkJUkJq
+  build_artifact_cid: https://ipfs.io/ipfs/QmN2yevgjC92gzGi2BY6Q2yBWmR6JNWQ9yscoPPyy1V2Hv
+  tls_cert_cid: QmTAnmDMSnzqAN3yyXtFD4KpyATkeze62ZkbmXHjJ8xQW8
+  version: 1.2.3
@@ -0,0 +1,13 @@
+FROM node:18.15.0-alpine3.16
+
+RUN apk --update --no-cache add git python3 alpine-sdk bash
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies..." && \
+  yarn install && \
+  cd packages/snap
+
+CMD ["bash", "-c", "yarn start"]
@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+# Build cerc/mobymask-snap
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/mobymask-snap:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/mobymask-snap
@@ -0,0 +1,12 @@
+FROM node:18.17.1-alpine3.18
+
+RUN apk --update --no-cache add python3 alpine-sdk bash curl jq
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies" && \
+  yarn && yarn build:node
+
+WORKDIR /app/packages/nitro-node
@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/nitro-contracts
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/nitro-contracts:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/ts-nitro
@@ -0,0 +1,12 @@
+FROM node:18.17.1-alpine3.18
+
+RUN apk --update --no-cache add python3 alpine-sdk bash curl jq
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies" && \
+  yarn
+
+RUN cd packages/nitro-rpc-client
@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/nitro-rpc-client
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/nitro-rpc-client:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/go-nitro
@@ -1,10 +1,8 @@
 #!/usr/bin/env bash
 # Build cerc/plugeth-statediff
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
+# Pass Go auth token if present
+if [[ -n "${CERC_GO_AUTH_TOKEN}" ]]; then
+    build_command_args="${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN}"
 fi
-docker build -t cerc/plugeth-statediff:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth-statediff
+docker build -t cerc/plugeth-statediff:local ${build_command_args} ${CERC_REPO_BASE_DIR}/plugeth-statediff
@@ -0,0 +1,22 @@
+# Using the same golang image as used to build plugeth: https://git.vdb.to/cerc-io/plugeth/src/branch/statediff/Dockerfile
+FROM golang:1.20-alpine3.18 as delve
+
+# Add delve so that we can do remote debugging.
+RUN go install github.com/go-delve/delve/cmd/dlv@latest
+
+FROM cerc/plugeth-statediff:local as statediff
+FROM cerc/plugeth:local as plugeth
+
+FROM alpine:3.18
+
+# Install tools often used in scripting, like bash, wget, and jq.
+RUN apk add --no-cache ca-certificates bash wget curl python3 bind-tools postgresql-client jq
+
+COPY --from=delve /go/bin/dlv /usr/local/bin/
+COPY --from=plugeth /usr/local/bin/geth /usr/local/bin/
+
+# Place all plugeth plugins in /usr/local/lib/plugeth
+COPY --from=statediff  /usr/local/lib/statediff.so /usr/local/lib/plugeth/
+
+EXPOSE 8545 8546 8551 6060 30303 30303/udp 40000
+ENTRYPOINT ["geth"]
@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/cerc-plugeth-with-plugins
+set -x
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/plugeth-with-plugins:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} $SCRIPT_DIR
@@ -1,10 +1,8 @@
 #!/usr/bin/env bash
 # Build cerc/plugeth
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
+# Pass Go auth token if present
+if [[ -n "${CERC_GO_AUTH_TOKEN}" ]]; then
+    build_command_args="${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN}"
 fi
-docker build -t cerc/plugeth:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth
+docker build -t cerc/plugeth:local ${build_command_args} ${CERC_REPO_BASE_DIR}/plugeth
@@ -0,0 +1,13 @@
+FROM node:18.15.0-alpine3.16
+
+RUN apk --update --no-cache add git alpine-sdk bash jq curl
+RUN curl -L https://unpkg.com/@pnpm/self-installer | node
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies and building..." && \
+  pnpm install && pnpm build && \
+  cd examples/token-erc20 && \
+  pnpm install
@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+
+# Build cerc/ponder
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/ponder:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/ponder
@@ -14,6 +14,8 @@ else
    echo "Filesystem is fresh"
    echo `date` > $EXISTSFILENAME
 fi
-
+if [ -n "$CERC_TEST_PARAM_1" ]; then
+  echo "Test-param-1: ${CERC_TEST_PARAM_1}"
+fi
 # Run nginx which will block here forever
 /usr/sbin/nginx -g "daemon off;"
@@ -1,13 +1,10 @@
 FROM node:16.17.1-alpine3.16

-RUN apk --update --no-cache add git python3 alpine-sdk
+RUN apk --update --no-cache add git python3 alpine-sdk bash curl jq

 WORKDIR /app

 COPY . .

-RUN echo "Building watcher-ts" && \
-    git checkout v0.2.19 && \
+RUN echo "Building erc20-watcher-ts" && \
    yarn && yarn build
-
-WORKDIR /app/packages/erc20-watcher
@@ -6,4 +6,4 @@ source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 # See: https://stackoverflow.com/a/246128/1701505
 SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )

-docker build -t cerc/watcher-erc20:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/watcher-ts
+docker build -t cerc/watcher-erc20:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/erc20-watcher-ts
@@ -1,4 +1,4 @@
-FROM node:16.17.1-alpine3.16
+FROM node:18.17.1-alpine3.17

 RUN apk --update --no-cache add git python3 alpine-sdk jq

@@ -14,6 +14,7 @@ cerc/laconic-registry-cli
 cerc/laconic-console-host
 cerc/fixturenet-eth-geth
 cerc/fixturenet-eth-lighthouse
+cerc/fixturenet-eth-genesis
 cerc/watcher-ts
 cerc/watcher-mobymask
 cerc/watcher-erc20
@@ -51,3 +52,8 @@ cerc/graph-node
 cerc/sushiswap-subgraphs
 cerc/webapp-base
 cerc/watcher-mobymask-v3
+cerc/go-nitro
+cerc/nitro-contracts
+cerc/mobymask-snap
+cerc/ponder
+cerc/nitro-rpc-client
@@ -37,3 +37,9 @@ sushiswap-subgraph-v3
 fixturenet-sushiswap-subgraph-v3
 watcher-mobymask-v3
 mobymask-app-v3
+go-nitro
+nitro-rpc-client
+nitro-contracts
+mobymask-snap
+ponder
+ipld-eth-server-payments
@@ -1,7 +1,7 @@
-github.com/cerc-io/ipld-eth-db
-github.com/cerc-io/go-ethereum
-github.com/cerc-io/ipld-eth-server
-github.com/cerc-io/eth-statediff-service
+git.vdb.to/cerc-io/ipld-eth-db
+git.vdb.to/cerc-io/go-ethereum
+git.vdb.to/cerc-io/ipld-eth-server
+git.vdb.to/cerc-io/eth-statediff-service
 github.com/cerc-io/eth-statediff-fill-service
 github.com/cerc-io/ipld-eth-db-validator
 github.com/cerc-io/ipld-eth-beacon-indexer
@@ -18,7 +18,7 @@ github.com/vulcanize/uniswap-watcher-ts
 github.com/vulcanize/uniswap-v3-info
 github.com/vulcanize/assemblyscript
 github.com/cerc-io/eth-probe
-github.com/cerc-io/tx-spammer
+git.vdb.to/cerc-io/tx-spammer
 github.com/dboreham/foundry
 github.com/lirewine/gem
 github.com/lirewine/debug
@@ -30,7 +30,7 @@ github.com/ethereum-optimism/optimism
 github.com/pokt-network/pocket-core
 github.com/pokt-network/pocket-core-deployments
 github.com/cerc-io/azimuth-watcher-ts
-github.com/cerc-io/ipld-eth-state-snapshot
+git.vdb.to/cerc-io/ipld-eth-state-snapshot
 github.com/cerc-io/gelato-watcher-ts
 github.com/filecoin-project/lotus
 git.vdb.to/cerc-io/test-project
@@ -43,3 +43,7 @@ github.com/cerc-io/sushiswap-v3-core
 github.com/cerc-io/sushiswap-v3-periphery
 github.com/graphprotocol/graph-node
 github.com/sushiswap/subgraphs
+github.com/cerc-io/go-nitro
+github.com/cerc-io/ts-nitro
+github.com/cerc-io/mobymask-snap
+github.com/cerc-io/ponder
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
iskay	bd8c78e1a3	update fixturenet-plugeth test	2023-11-02 09:26:47 -04:00
telackey	fd5779f967	Fix KeyError accessing config. (#620 )	2023-10-31 12:29:19 -05:00
Ian	d854dd5c81	Update fixturenet-laconicd.yml	2023-10-30 15:44:46 -04:00
Ian	948f9f4287	Merge pull request #611 from cerc-io/iskay/fixturenet-laconicd-test add fixturenet-laconicd test	2023-10-30 11:50:33 -04:00
dboreham	b92d9cd7dd	Update stack README.md to use config directive	2023-10-29 23:16:39 -06:00
dboreham	86076c7ed8	Fix deployer.exec() (#619 )	2023-10-29 22:26:15 -06:00
telackey	8cac598679	Split act-runner into its own pod and offer as a distinct stack. (#612 ) * Split act-runner into its own pod and offer as a distinct stack.	2023-10-27 13:57:13 -05:00
dboreham	6130eab5cb	k8s deploy (#614 )	2023-10-27 10:19:44 -06:00
Ian	f198f43b3a	add newline	2023-10-27 08:48:44 -04:00
iskay	36d1e0eedd	add fixturenet-laconicd test	2023-10-26 17:26:42 -04:00
telackey	0f5b1a097b	Add plugeth to chain-chunker stack (needed for new verify option). (#610 )	2023-10-25 14:47:53 -05:00
telackeyanddboreham	20d633f81c	Plugeth-based full mainnet stack. (#592 ) * Plugeth-based full mainnet stack. --------- Co-authored-by: David Boreham <david@bozemanpass.com>	2023-10-25 14:42:52 -05:00
dboreham	5e36e3e2ae	Turn off long run time test on push/pr unless explicitly triggered (#606 )	2023-10-24 22:28:58 -06:00
dboreham	f7eb8b9a38	Rearrange files (#605 )	2023-10-24 22:13:09 -06:00
dboreham	5b9b12a223	Rename functions to remove compose prefix (#604 )	2023-10-24 16:23:28 -06:00
Ian	567dadef7d	update fixturenet-eth test (#600 )	2023-10-24 16:21:30 -06:00
dboreham	052f0df4b0	Fix execute call parameter (#603 )	2023-10-24 16:16:57 -06:00
dboreham	c51671f786	Trigger CI Job after k8s refactor updates	2023-10-24 14:51:04 -06:00
dboreham	573a19a3b7	k8s refactor (#595 )	2023-10-24 14:44:48 -06:00
Zach	fc051265d8	more demo records for the console (#597 ) * increase gas * create six demo records * print record * use moon * typos * use git.vdb.t * use the right moon * ok	2023-10-24 14:25:25 -04:00
Zach	ddebb9c690	bind only to 127.0.0.1 (#598 )	2023-10-23 10:51:44 -04:00
Zach	fe6c3f92ed	typo (#596 )	2023-10-21 13:37:21 -04:00
Zach	c06be6da81	stack for the laconic.com website (#590 ) * website stack * use a release, update ports * use deployments feature for website	2023-10-21 13:31:47 -04:00
telackey	3291c16466	Update stacks for migrated laconic repos. (#594 )	2023-10-20 11:59:06 -05:00
nabarun	69b071ee7a	Add example GQL queries made in Ponder indexers (#593 ) * Add example GQL queries made in Ponder indexers * Use fixturenet chainId in GQL query	2023-10-19 14:55:07 +05:30
nabarunandShreerang Kale	4a90cedeb2	Run multiple Ponder indexers in payment stack (#588 ) * Separate ponder indexer and ponder watcher and add second ponder indexer * Handle review changes * Update config to point ponder watcher to indexer 2 to indexer 1 * Update Ponder demo * Use deployed ERC20 contract in second Ponder indexer * Add order by timestamp in Ponder watcher app entities query * Upgrade go-nitro version to v0.1.2-ts-port-0.1.9 * Decrease Ponder start block to process contract transfer event at deployment --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-19 12:26:10 +05:30
Zach	2402220273	updates to payments demo (#566 )	2023-10-18 12:23:57 -04:00
Zach	771943864e	build fixturenet payments demo on arm (#564 )	2023-10-18 12:05:09 -04:00
prathamesh0	dd4dd519dd	Add a container for ERC20 contract txs in the payments stack (#591 ) * Add a container for ERC20 contract txs in the payments stack * Use erc20-watcher-ts repo in erc20 stack	2023-10-18 17:40:55 +05:30
prathamesh0	3262ebe4ac	Setup ipld-eth-server communicating with a remote Nitro node (#587 ) * Use durable store for in-process Nitro node * Update setup for external go-nitro node * Add a separate service for ipld-eth-server with remote Nitro node * Update repo branches / versions * Wait for external Nitro node endpoint and update instructions * Update repo branches	2023-10-18 13:51:55 +05:30
telackey	8246e3551f	53: Make sure curl and jq are present in the container. (#585 )	2023-10-17 13:36:43 -05:00
nabarunandShreerang Kale	e26a05f2c7	Add Ponder indexer queries payment config (#586 ) * Add support to pass ratesFile in config * Change branch for ponder to laconic-esm * Fix repo name for ponder --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-17 16:21:40 +05:30
dboreham	f9b102f5fa	Trigger many CI jobs	2023-10-16 09:56:12 -06:00
nabarunandShreerang Kale	7ce40331d8	Remove reverse payment proxy from payments stack (#584 ) * Remove reverse payment proxy service from payment stack * Remove run-reverse-payment-proxy.sh * Remove reverse payment proxy port from readme --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-16 18:15:15 +05:30
dboreham	479a7772f3	Trigger CI Job	2023-10-14 16:13:46 -06:00
prathamesh0	4030c0a0d2	Add a separate pod for ipld-eth-server with payments (#583 ) * Add a separate pod for ipld-eth-server with payments * Wait for nitro contracts to become available	2023-10-14 09:47:55 +05:30
dboreham	ba09043227	Trigger run of fixturenet-eth-plugeth test	2023-10-13 13:56:40 -06:00
dboreham	99f80ddc7c	Trigger fixturenet-eth-plugeth-test CI job	2023-10-13 07:38:27 -06:00
prathamesh0 nabarun Shreerang Kale	246d3d8732	Run go-nitro node in process in ipld-eth-server (#575 ) * Setup ipld-eth-server to run in-process Nitro node * Update watcher version in fixturenet-payments stack * Update upstream nitro multiaddr in watcher setup * Change RPC query endpoint to ipld-eth-server * Update Ponder config to pay ipld-eth-server Nitro node * Separate nitro-rpc-client service and update demo.md * Remove unnecessary volumes * Update ipld-eth-server branch * Fix clean up steps --------- Co-authored-by: Nabarun <nabarun@deepstacksoft.com> Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-13 15:27:17 +05:30
dboreham	a68abe5f5d	Update fixturenet-eth-test Trigger CI job run	2023-10-12 22:42:05 -06:00
dboreham	c3d87692fa	python setup CI action for arm linux (#578 ) * Workaround for missing Python binaries for ARM * Trigger CI job * Add Python install workaround to remaining jobs * Typo	2023-10-12 21:53:47 -06:00
dboreham	61579f0434	Implement scheme for triggering individual CI jobs (#577 ) * Implement scheme for triggering individual CI jobs * Add missing comment	2023-10-12 20:40:39 -06:00
nabarunandShreerang Kale	0bec51e96a	Pay for queries from watcher to indexer mode Ponder apps in payments stack (#573 ) * Use ponder in watcher mode and indexer mode separately in payments stack * Refactor config file and configure env variables for watcher mode * Update demo.md for payments stack * Handle review changes * Setup config to pay for watcher to indexer GQL queries * Fix config in stack for making payments in watcher ponder app * Update demo for payment from watcher to indexer mode Ponder apps * Use laconic-esm brannch for ponder --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-12 14:16:44 +05:30
roysc	f4216419c4	Don't error when CERC_GO_AUTH_TOKEN isn't set (#574 ) * Don't error when CERC_GO_AUTH_TOKEN isn't set * conditionally add ags	2023-10-11 21:24:52 -05:00
dboreham	420b1c292b	Force the stack to be specified (#571 ) * Force the stack to be specified * Fix up test * Remove test for legacy non-stack deploy	2023-10-10 16:13:29 -06:00
dboreham	1446e54f31	Tolerate missing plugin functions (#570 )	2023-10-10 15:32:07 -06:00
dboreham	2486003361	Gitea deployment (#568 ) * First part of deployments for external repos * Generate deployment dir * Create empty config file * Copy script files into deployment * Run scripts in deployment * Refactor * Integrate external plugins * Remove debug output	2023-10-09 14:54:55 -06:00
dboreham	5ec98ee9a1	Add missing container image (#567 )	2023-10-09 12:21:54 -06:00
prathamesh0	8c4ed24dfc	Update mobymask-v3 stack (#563 )	2023-10-09 10:32:57 +05:30
prathamesh0	9e56f6357d	Update demo instructions in fixturenet-payments stack (#560 ) * Update demo instructions * Add expected payment proxy output logs * Wait for chain endpoint to be up before starting go-nitro node	2023-10-06 14:36:10 +05:30
prathamesh0	8770b1df86	Upgrade mobymask-ui version in fixturenet-payments stack (#559 )	2023-10-05 17:58:34 +05:30
nabarun	889df76f4f	Use release tag for go-nitro container in payments stack (#558 )	2023-10-05 16:43:48 +05:30
nabarun Shreerang Kale prathamesh	5d19c56b0c	Upgrade Nitro version in stack and add `nitro-rpc-client` CLI (#557 ) * Changes required for ponder container and upgrade ts-nitro version * Fix empty CERC_RELAY_MULTIADDR env variable * Add curl output for ponder payment channel * Add `nitro-rpc-client` container in payments stack (#1) * Add container for nitro-rpc-client * Add nitro-rpc-client service * Update nitro-rpc-client container * Update demo.md in payments stack --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com> * Update env variables used for go-nitro container * Pass Nitro chain URL in watcher config * Update ponder config chainUrl * Remove curl check in ponder start script * Upgrade node version to 18 in watcher-ts Dockerfile * Update ponder section in the demo instructions --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com> Co-authored-by: Prathamesh Musale <prathamesh.musale0@gmail.com>	2023-10-05 14:57:47 +05:30
prathamesh0	d57efe87b8	Add demo instructions to fixturenet-payments stack (#556 ) * Update remaining references for core repos from github to gitea * Add demo instructions * Add demo clean up steps	2023-10-04 12:51:04 +05:30
telackey	80b0c07736	Open ports for 2nd geth instance and add missing lcli param. (#555 )	2023-10-03 19:52:23 -05:00
telackey	6fa3ca2b6d	Update from github.com to git.vdb.to where applicable. (#553 ) * Update from github.com to git.vdb.to for many repos. * Use ipld-eth-server@v1.11.6-statediff-v5 for most stacks * Specify go-ethereum branch/tag	2023-10-03 13:55:33 -05:00
dboreham	3c5489681f	Implement deployment config (#554 ) * Initial deployment config implementation * Complete implementation, add test * Fix funky indentation * Revert test test	2023-10-03 12:49:15 -06:00
prathamesh0andnabarun	cf039d9562	Add a fixturenet-payments stack (#540 ) * Add a fixturenet-payments stack * Export the WebSocket port in fixturenet-eth-geth service * Add container to run a go-nitro node * Add container to deploy Nitro contracts * Read contract addresses from a volume when running the Nitro node * Add a service for Nitro reverse payment proxy * Expose payment proxy endpoint to be accessible from host * Map nitro node messaging and payment proxy ports to host * Use container to deploy Nitro contracts in mobymask-v3 stack * Use a common contract deployment script from mobymask-v3 stack * Add MobyMask contract deployment and watcher services * Fixes for contract deployment and watcher scripts * Add a container and service for mobymask-snap * Add MobyMask app service * Add container and service for a ponder app * Fix ponder setup and update instructions * Handle review comments * Use enablepaidrpcmethods flag in reverse payment proxy server * Update go-nitro branch * Fixes for mobymask-v3 stack --------- Co-authored-by: Nabarun <nabarun@deepstacksoft.com>	2023-10-03 17:40:34 +05:30
Zach	b485a3b8d8	doc on how to add a stack (#552 ) * doc on how to add a stack * commands to run + nits	2023-10-01 14:33:01 -04:00
dboreham	72dbee88d4	Document adding config.yml (#551 )	2023-09-27 15:52:08 -06:00
Zachandzramsay	33e443f41f	Gitea x Laconicd + some doc updates (#549 ) * combine instructions from 2 stacks Former-commit-id: 77d194cfd9b0503c3e55e8c79429fa1f36a8d784 * tidy doc --------- Co-authored-by: zramsay <zach@bluecollacoding.ca>	2023-09-27 17:36:12 -04:00
Zach	bc78c5e0d6	Update README.md (#544 )	2023-09-27 17:07:30 -04:00
dboreham	7fd2439aa9	Fix output text (#548 )	2023-09-27 15:04:13 -06:00
dboreham	eca5aae991	Document self-update command (#547 )	2023-09-27 14:57:48 -06:00
dboreham	5beaf69a36	Implement --check-only (#546 )	2023-09-27 14:51:52 -06:00
dboreham	06c4a77afe	Simple self-update feature (#545 ) * Simple self-update feature * Update quick install script for self-update	2023-09-27 14:24:41 -06:00
				`@@ -0,0 +1,2 @@`
				`Change this file to trigger running the fixturenet-eth-test CI job`