update fixturenet-plugeth test

Fix KeyError accessing config. (#620 )
Update fixturenet-laconicd.yml
2023-11-02 09:26:47 -04:00 · 2023-10-31 12:29:19 -05:00 · 2023-10-30 15:44:46 -04:00 · 2023-10-30 11:50:33 -04:00 · 2023-10-29 23:16:39 -06:00 · 2023-10-29 22:26:15 -06:00
131 changed files with 3157 additions and 553 deletions
@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Plugeth-Test

 on:
  push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,8 +19,16 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
      - name: "Print Python version"
@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Test

 on:
  push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-test'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,7 +19,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -0,0 +1,55 @@
+name: Fixturenet-Laconicd-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-laconicd-test'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+
+jobs:
+  test:
+    name: "Run an Laconicd fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Update'
+        run: apt-get update
+      - name: 'Setup jq'
+        run: apt-get install jq -y
+      - name: 'Check jq'
+        run: |
+          which jq
+          jq --version
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
@@ -5,6 +5,8 @@ on:
    branches:
      - main
      - publish-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 jobs:
  publish:
@@ -18,7 +20,15 @@ jobs:
        run: |
          build_tag=$(./scripts/create_build_tag_file.sh)
          echo "build-tag=v${build_tag}" >> $GITHUB_OUTPUT
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -7,6 +7,8 @@ on:
    branches:
      - main
      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -7,6 +7,8 @@ on:
    branches:
      - main
      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -38,3 +48,4 @@ jobs:
      - name: "Run smoke tests"
        run: ./tests/smoke-test/run-smoke-test.sh

+
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-plugeth-test CI job
+trigger
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
@@ -0,0 +1,30 @@
+name: Fixturenet-Eth Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-eth-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-eth test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth/run-test.sh
@@ -0,0 +1,30 @@
+name: Fixturenet-Laconicd Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-laconicd-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-laconicd test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
@@ -0,0 +1,30 @@
+name: Fixturenet-Plugeth Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-plugeth-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-plugeth test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-plugeth tests"
+        run: ./tests/fixturenet-plugeth/run-test.sh
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+
@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
+trigger
@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-plugeth-test CI job
+
+trigger
@@ -7,4 +7,4 @@ __pycache__
 *~
 package
 app/data/build_tag.txt
-build
+/build
@@ -52,7 +52,7 @@ Version: 1.1.0-7a607c2-202304260513
 Save the distribution url to `~/.laconic-so/config.yml`:
 ```bash
 mkdir ~/.laconic-so
-echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml"
+echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml
 ```

 ### Update
@@ -15,7 +15,7 @@

 import os
 from abc import ABC, abstractmethod
-from app.deploy import get_stack_status
+from app.deploy.deploy import get_stack_status
 from decouple import config


@@ -52,7 +52,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
    continue_on_error = ctx.obj.continue_on_error

    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    container_build_dir = Path(__file__).absolute().parent.joinpath("data", "container-build")
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")

    if local_stack:
        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
@@ -70,6 +70,7 @@ services:
    command: "/run-op-geth.sh"
    ports:
      - "0.0.0.0:8545:8545"
+      - "0.0.0.0:8546:8546"
    healthcheck:
      test: ["CMD", "nc", "-vz", "localhost:8545"]
      interval: 30s
@@ -11,10 +11,13 @@ services:
        condition: service_completed_successfully
    environment:
      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
-      CERC_NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
-      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      CERC_NITRO_PK: ${CERC_NITRO_PK:-f36f6dd450892224ee113899195ef922a4795d41c32cafb386d9aab6e0b7b0c6}
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
      CERC_NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
      CERC_NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/data/nitro-store}
+      CERC_NITRO_MSG_PORT: ${CERC_NITRO_MSG_PORT:-3006}
+      CERC_NITRO_WS_MSG_PORT: ${CERC_NITRO_WS_MSG_PORT:-5006}
+      CERC_NITRO_RPC_PORT: ${CERC_NITRO_RPC_PORT:-4006}
      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
@@ -24,26 +27,15 @@ services:
      - nitro_deployment:/app/deployment
      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "4005"]
-      interval: 10s
+      test: ["CMD", "nc", "-vz", "localhost", "4006"]
+      interval: 30s
      timeout: 5s
      retries: 10
      start_period: 10s
    ports:
-      - "3005"
-      - "4005:4005"
-      - "5005:5005"
-
-  nitro-rpc-client:
-      image: cerc/nitro-rpc-client:local
-      hostname: nitro-rpc-client
-      restart: on-failure
-      depends_on:
-        # Wait for the go-nitro node to start
-        go-nitro:
-          condition: service_healthy
-      command: ["bash", "-c", "tail -f /dev/null"]
-
+      - "3006:3006"
+      - "4006:4006"
+      - "5006:5006"

 volumes:
  go_nitro_data:
@@ -0,0 +1,111 @@
+version: "3.2"
+services:
+  ipld-eth-server-1:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-true}
+      NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
+      NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
+      NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/nitro-data/nitro-store}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - eth_server_nitro_data:/app/nitro-data
+      - nitro_deployment:/app/deployment
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+      - "3005:3005"
+      - "4005:4005"
+      - "5005:5005"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+  ipld-eth-server-2:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-false}
+      NITRO_ENDPOINT: ${CERC_NITRO_ENDPOINT:-go-nitro:4006/api/v1}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+volumes:
+  eth_server_nitro_data:
+  nitro_deployment:
@@ -0,0 +1,8 @@
+version: "3.2"
+
+services:
+  laconic-dot-com:
+    image: cerc/laconic-dot-com:local
+    restart: always
+    ports:
+      - "3000"
@@ -0,0 +1,29 @@
+version: "3.2"
+
+services:
+  migrations:
+    restart: on-failure
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-db:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+
+  ipld-eth-db:
+    image: timescale/timescaledb:2.8.1-pg14
+    restart: always
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+    volumes:
+      - mainnet_eth_ipld_eth_db:/var/lib/postgresql/data
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      - "5432"
+volumes:
+  mainnet_eth_ipld_eth_db:
@@ -0,0 +1,24 @@
+version: "3.7"
+services:
+  ipld-eth-server:
+    restart: always
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-ipld-eth-server/srv.env
+    volumes:
+      - ../config/mainnet-eth-ipld-eth-server/config.toml:/app/config.toml:ro
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40001"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
@@ -6,7 +6,7 @@ services:
    env_file:
      - ../config/mainnet-eth-keycloak/keycloak.env
    healthcheck:
-      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      test: ["CMD", "nc", "-v", "localhost", "35432"]
      interval: 30s
      timeout: 10s
      retries: 10
@@ -14,7 +14,7 @@ services:
    volumes:
      - mainnet_eth_keycloak_db:/var/lib/postgresql/data
    ports:
-      - 5432
+      - 35432

  keycloak:
    image: cerc/keycloak:local
@@ -0,0 +1,72 @@
+
+services:
+
+  mainnet-eth-geth-1:
+    restart: always
+    hostname: mainnet-eth-geth-1
+    cap_add:
+      - SYS_PTRACE
+    image: cerc/plugeth-with-plugins:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-geth.sh"
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-plugeth/geth.env
+    volumes:
+      - mainnet_eth_plugeth_geth_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-geth.sh:/opt/run-geth.sh
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      # http api
+      - "8545"
+      # ws api
+      - "8546"
+      # ws el
+      - "8551"
+      # p2p
+      - "30303"
+      - "30303/udp"
+      # debugging
+      - "40000"
+      # metrics
+      - "6060"
+
+  mainnet-eth-lighthouse-1:
+    restart: always
+    hostname: mainnet-eth-lighthouse-1
+    healthcheck:
+      test: ["CMD", "wget", "--tries=1", "--connect-timeout=1", "--quiet", "-O", "-", "http://localhost:5052/eth/v2/beacon/blocks/head"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 30s
+    environment:
+      LIGHTHOUSE_EXECUTION_ENDPOINT: "http://mainnet-eth-geth-1:8551"
+    env_file:
+      - ../config/mainnet-eth-plugeth/lighthouse.env
+    image: cerc/lighthouse:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-lighthouse.sh"
+    volumes:
+      - mainnet_eth_plugeth_lighthouse_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-lighthouse.sh:/opt/run-lighthouse.sh
+    ports:
+      # api
+      - "5052"
+      # metrics
+      - "5054"
+      # p2p
+      - "9000"
+      - "9000/udp"
+
+volumes:
+  mainnet_eth_plugeth_config_data:
+  mainnet_eth_plugeth_geth_1_data:
+  mainnet_eth_plugeth_lighthouse_1_data:
@@ -1,27 +0,0 @@
-version: '3.7'
-
-services:
-  nitro-reverse-payment-proxy:
-    image: cerc/go-nitro:local
-    hostname: nitro-reverse-payment-proxy
-    restart: on-failure
-    depends_on:
-      # Wait for the go-nitro node to start
-      go-nitro:
-        condition: service_healthy
-    environment:
-      CERC_PROXY_ADDRESS: 0.0.0.0:8081
-      CERC_PROXY_NITRO_ENDPOINT: ${CERC_PROXY_NITRO_ENDPOINT:-go-nitro:4005/api/v1}
-      CERC_PROXY_DESTINATION_URL: ${CERC_PROXY_DESTINATION_URL:-http://ipld-eth-server:8081}
-      CERC_PROXY_COST_PER_BYTE: ${CERC_PROXY_COST_PER_BYTE:-1}
-    entrypoint: ["bash", "-c", "/app/run-reverse-payment-proxy.sh"]
-    volumes:
-      - ../config/go-nitro/run-reverse-payment-proxy.sh:/app/run-reverse-payment-proxy.sh
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "8081"]
-      interval: 10s
-      timeout: 5s
-      retries: 10
-      start_period: 10s
-    ports:
-      - "8081:8081"
@@ -0,0 +1,7 @@
+version: '3.7'
+services:
+    nitro-rpc-client:
+      image: cerc/nitro-rpc-client:local
+      hostname: nitro-rpc-client
+      restart: on-failure
+      command: ["bash", "-c", "tail -f /dev/null"]
@@ -0,0 +1,80 @@
+version: '3.7'
+
+services:
+  ponder-er20-contracts:
+    image: cerc/watcher-erc20:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT:-http://fixturenet-eth-geth-1:8545}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+    volumes:
+      - ../config/ponder/deploy-erc20-contract.sh:/app/deploy-erc20-contract.sh
+      - erc20_deployment:/app/deployment
+    command: ["bash", "-c", "/app/deploy-erc20-contract.sh"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  ponder-app-indexer-1:
+    hostname: ponder-app-indexer-1
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_PONDER_RPC_URL_1: ${PONDER_RPC_URL_1:-http://ipld-eth-server-2:8081}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK_1:-58368d20ff12f17669c06158c21d885897aa56f9be430edc789614bf9851d53f}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK_1:-fb1e9af328c283ca3e2486e7c24d13582b7912057d8b9542ff41503c85bc05c0}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0x660a4bEF3fbC863Fcd8D3CDB39242aE513d7D92e}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/go-nitro/tcp/5006/ws/p2p/16Uiu2HAmNUiX7bpCpbo5JdqEebp85ptGU2Vk2AT9E3BykvbwQ3F9}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.indexer-1.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - erc20_deployment:/erc20
+      - ponder_indexer_1_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "127.0.0.1:42070:42070"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  ponder-app-indexer-2:
+    hostname: ponder-app-indexer-2
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer-1:42070/graphql}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK_2:-0aca28ba64679f63d71e671ab4dbb32aaa212d4789988e6ca47da47601c18fe2}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK_2:-6177345b77c4069ac4d553f8b43cf68a799ca4bb63eac93d6cf796d63694ebf0}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.indexer-2.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - erc20_deployment:/erc20
+      - ponder_indexer_2_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "127.0.0.1:42071:42070"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  nitro_deployment:
+  erc20_deployment:
+  ponder_indexer_1_nitro_data:
+  ponder_indexer_2_nitro_data:
@@ -0,0 +1,39 @@
+
+version: '3.7'
+
+services:
+  ponder-app-watcher:
+      hostname: ponder-app-watcher
+      depends_on:
+        - ponder-app-indexer-1
+      restart: unless-stopped
+      image: cerc/ponder:local
+      working_dir: /app/examples/token-erc20
+      environment:
+        CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+        CERC_PONDER_NITRO_PK: ${CERC_PONDER_WATCHER_NITRO_PK:-febb3b74b0b52d0976f6571d555f4ac8b91c308dfa25c7b58d1e6a7c3f50c781}
+        CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_WATCHER_NITRO_CHAIN_PK:-be4aa664815ea3bc3d63118649a733f6c96b243744310806ecb6d96359ab62cf}
+        CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+        CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+        CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer-2:42070/graphql}
+        CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01}
+        CERC_INDEXER_NITRO_PAY_AMOUNT: ${CERC_INDEXER_NITRO_PAY_AMOUNT:-50}
+      command: ["bash", "./ponder-start.sh"]
+      volumes:
+        - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+        - ../config/ponder/ponder.watcher.config.ts:/app/examples/token-erc20/ponder.config.ts
+        - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+        - peers_ids:/peers
+        - nitro_deployment:/nitro
+        - erc20_deployment:/erc20
+        - ponder_watcher_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+      ports:
+        - "127.0.0.1:42069:42069"
+      extra_hosts:
+        - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  nitro_deployment:
+  erc20_deployment:
+  ponder_watcher_nitro_data:
@@ -1,31 +0,0 @@
-version: '3.7'
-
-services:
-  ponder-app:
-    restart: unless-stopped
-    image: cerc/ponder:local
-    working_dir: /app/examples/token-erc20
-    environment:
-      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
-      CERC_PONDER_RPC_URL_1: ${PONDER_RPC_URL_1:-http://nitro-reverse-payment-proxy:8081}
-      CERC_PONDER_NITRO_PK: ${CERC_PONDER_NITRO_PK:-58368d20ff12f17669c06158c21d885897aa56f9be430edc789614bf9851d53f}
-      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_NITRO_CHAIN_PK:-fb1e9af328c283ca3e2486e7c24d13582b7912057d8b9542ff41503c85bc05c0}
-      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
-      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
-      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE}
-      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/go-nitro/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
-      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-5000}
-    command: ["bash", "./ponder-start.sh"]
-    volumes:
-      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
-      - ../config/ponder/ponder.config.ts:/app/examples/token-erc20/ponder.config.ts
-      - peers_ids:/peers
-      - nitro_deployment:/nitro
-      - ponder_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-volumes:
-  peers_ids:
-  nitro_deployment:
-  ponder_nitro_data:
@@ -34,7 +34,7 @@ services:
      - ETH_RPC_URL=http://go-ethereum:8545
    command: ["sh", "-c", "yarn server"]
    volumes:
-      - ../config/watcher-erc20/erc20-watcher.toml:/app/packages/erc20-watcher/environments/local.toml
+      - ../config/watcher-erc20/erc20-watcher.toml:/app/environments/local.toml
    ports:
      - "0.0.0.0:3002:3001"
      - "0.0.0.0:9002:9001"
@@ -89,8 +89,8 @@ services:
      CERC_PEER_ID: ${CERC_PEER_ID}
      CERC_ENABLE_UPSTREAM_PAYMENTS: ${CERC_ENABLE_UPSTREAM_PAYMENTS}
      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE}
-      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/go-nitro/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
-      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-5000}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/ipld-eth-server-1/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
    command: ["bash", "./start-server.sh"]
    volumes:
      - ../config/watcher-mobymask-v3/watcher-config-template.toml:/app/environments/watcher-config-template.toml
@@ -5,5 +5,5 @@ services:
    userKey: REPLACE_WITH_MYKEY
    bondId:
    chainId: laconic_9000-1
-    gas: 250000
+    gas: 350000
    fees: 200000aphoton
@@ -1,6 +1,5 @@
 #!/bin/bash

-set -e
 if [ -n "$CERC_SCRIPT_DEBUG" ]; then
  set -x
 fi
@@ -30,6 +29,22 @@ fi

 echo "Running Nitro node"

-# TODO Wait for chain endpoint to come up
+# Assuming CERC_NITRO_CHAIN_URL is of format <ws|http>://host:port
+ws_host=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 1)
+ws_port=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 2)

-./nitro -chainurl ${CERC_NITRO_CHAIN_URL} -msgport 3005 -rpcport 4005 -wsmsgport 5005 -pk ${CERC_NITRO_PK} -chainpk ${CERC_NITRO_CHAIN_PK} -naaddress ${NA_ADDRESS} -vpaaddress ${VPA_ADDRESS} -caaddress ${CA_ADDRESS} -usedurablestore ${CERC_NITRO_USE_DURABLE_STORE} -durablestorefolder ${CERC_NITRO_DURABLE_STORE_FOLDER}
+# Wait till chain endpoint is available
+retry_interval=5
+while true; do
+  nc -z -w 1 "$ws_host" "$ws_port"
+
+  if [ $? -eq 0 ]; then
+    echo "Chain endpoint is available"
+    break
+  fi
+
+  echo "Chain endpoint not yet available, retrying in $retry_interval seconds..."
+  sleep $retry_interval
+done
+
+./nitro -chainurl ${CERC_NITRO_CHAIN_URL} -msgport ${CERC_NITRO_MSG_PORT} -rpcport ${CERC_NITRO_RPC_PORT} -wsmsgport ${CERC_NITRO_WS_MSG_PORT} -publicip "0.0.0.0" -pk ${CERC_NITRO_PK} -chainpk ${CERC_NITRO_CHAIN_PK} -naaddress ${NA_ADDRESS} -vpaaddress ${VPA_ADDRESS} -caaddress ${CA_ADDRESS} -usedurablestore ${CERC_NITRO_USE_DURABLE_STORE} -durablestorefolder ${CERC_NITRO_DURABLE_STORE_FOLDER} -tlscertfilepath "" -tlsKeyFilepath ""
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-echo "Running Nitro reverse payment proxy"
-echo "Using CERC_PROXY_ADDRESS ${CERC_PROXY_ADDRESS}"
-echo "Using CERC_PROXY_NITRO_ENDPOINT ${CERC_PROXY_NITRO_ENDPOINT}"
-echo "Using CERC_PROXY_DESTINATION_URL ${CERC_PROXY_DESTINATION_URL}"
-echo "Using CERC_PROXY_COST_PER_BYTE ${CERC_PROXY_COST_PER_BYTE}"
-
-./proxy -proxyaddress ${CERC_PROXY_ADDRESS} -nitroendpoint=${CERC_PROXY_NITRO_ENDPOINT} -destinationurl=${CERC_PROXY_DESTINATION_URL} -costperbyte ${CERC_PROXY_COST_PER_BYTE} -enablepaidrpcmethods
@@ -0,0 +1,71 @@
+#!/bin/sh
+
+read_nitro_addresses() {
+  nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+  # Check if CERC_NA_ADDRESS environment variable is set
+  if [ -n "$CERC_NA_ADDRESS" ]; then
+    echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+    echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+    echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+    echo "Using the above Nitro addresses"
+
+    export NITRO_NA_ADDRESS=${CERC_NA_ADDRESS}
+    export NITRO_VPA_ADDRESS=${CERC_VPA_ADDRESS}
+    export NITRO_CA_ADDRESS=${CERC_CA_ADDRESS}
+  else
+    # Read addresses from a file
+    # Keep retrying until found
+    echo "Reading Nitro addresses from ${nitro_addresses_file}"
+    retry_interval=5
+    while true; do
+      if [[ -e "$nitro_addresses_file" ]]; then
+        export NITRO_NA_ADDRESS=$(jq -r '.nitroAdjudicatorAddress' ${nitro_addresses_file})
+        export NITRO_VPA_ADDRESS=$(jq -r '.virtualPaymentAppAddress' ${nitro_addresses_file})
+        export NITRO_CA_ADDRESS=$(jq -r '.consensusAppAddress' ${nitro_addresses_file})
+
+        break
+      else
+        echo "File not yet available, retrying in $retry_interval seconds..."
+        sleep $retry_interval
+      fi
+    done
+  fi
+}
+
+wait_for_nitro_endpoint() {
+  retry_interval=5
+  while true; do
+    curl -I -s -o /dev/null $NITRO_ENDPOINT/health
+
+    if [ $? -eq 0 ]; then
+      echo "Nitro endpoint is up"
+      break
+    else
+      echo "Nitro endpoint not available yet, retrying in $retry_interval seconds..."
+      sleep $retry_interval
+    fi
+  done
+}
+
+if [ "$NITRO_RUN_NODE_IN_PROCESS" = "true" ]; then
+  read_nitro_addresses
+else
+  wait_for_nitro_endpoint
+fi
+
+echo "Beginning the ipld-eth-server process"
+
+START_CMD="./ipld-eth-server"
+if [ "true" == "$CERC_REMOTE_DEBUG" ] && [ -x "/usr/local/bin/dlv" ]; then
+    START_CMD="/usr/local/bin/dlv --listen=:40000 --headless=true --api-version=2 --accept-multiclient exec `pwd`/ipld-eth-server --continue --"
+fi
+
+echo running: $START_CMD ${VDB_COMMAND} --config=`pwd`/config.toml
+$START_CMD ${VDB_COMMAND} --config=`pwd`/config.toml
+rv=$?
+
+if [ $rv != 0 ]; then
+  echo "ipld-eth-server startup failed"
+  exit 1
+fi
@@ -0,0 +1,15 @@
+DATABASE_HOSTNAME="ipld-eth-db"
+DATABASE_NAME="cerc"
+DATABASE_PASSWORD="CHANGEME"
+DATABASE_PORT=5432
+DATABASE_USER="vdbm"
+
+POSTGRES_DB="${DATABASE_NAME}"
+POSTGRES_PASSWORD="${DATABASE_PASSWORD}"
+POSTGRES_USER="${DATABASE_USER}"
+
+CERC_STATEDIFF_DB_HOST="${DATABASE_HOSTNAME}"
+CERC_STATEDIFF_DB_NAME="${DATABASE_NAME}"
+CERC_STATEDIFF_DB_PASSWORD="${DATABASE_PASSWORD}"
+CERC_STATEDIFF_DB_PORT=${DATABASE_PORT}
+CERC_STATEDIFF_DB_USER="${DATABASE_USER}"
@@ -0,0 +1,33 @@
+[database]
+    name     = "" # $DATABASE_NAME
+    hostname = "" # $DATABASE_HOSTNAME
+    port     = 5432 # $DATABASE_PORT
+    user     = "" # $DATABASE_USER
+    password = "" # $DATABASE_PASSWORD
+
+[log]
+    level = "info" # $LOG_LEVEL
+
+[server]
+    ipc = false
+    ipcPath = "" # $SERVER_IPC_PATH
+    ws = false
+    wsPath = "0.0.0.0:8080" # $SERVER_WS_PATH
+    http = true
+    httpPath = "0.0.0.0:8081" # $SERVER_HTTP_PATH
+    graphql = false # $SERVER_GRAPHQL
+    graphqlPath = "0.0.0.0:8082" # $SERVER_GRAPHQL_PATH
+
+[ethereum]
+    chainConfig = "" # ETH_CHAIN_CONFIG
+    chainID = "1" # $ETH_CHAIN_ID
+    rpcGasCap = "1000000000000" # $ETH_RPC_GAS_CAP
+    httpPath = "mainnet-eth-geth-1:8545" # $ETH_HTTP_PATH
+    supportsStateDiff = true # $ETH_SUPPORTS_STATEDIFF
+    stateDiffTimeout = "4m" # $ETH_STATEDIFF_TIMEOUT
+    forwardEthCalls = false # $ETH_FORWARD_ETH_CALLS
+    proxyOnError = true # $ETH_PROXY_ON_ERROR
+    nodeID = "" # $ETH_NODE_ID
+    clientName = "" # $ETH_CLIENT_NAME
+    genesisBlock = "" # $ETH_GENESIS_BLOCK
+    networkID = "1" # $ETH_NETWORK_ID
@@ -0,0 +1,27 @@
+CERC_REMOTE_DEBUG="false"
+
+LOG_LEVEL="debug"
+
+ETH_CHAIN_ID=1
+ETH_CLIENT_NAME="Geth"
+ETH_FORWARD_ETH_CALLS="false"
+ETH_FORWARD_GET_STORAGE_AT="false"
+ETH_GENESIS_BLOCK="0xd4e56740f876aef8c010b86a40d5f56745a118d0906a34e69aec8c0db1cb8fa3"
+ETH_HTTP_PATH="mainnet-eth-geth-1:8545"
+ETH_NETWORK_ID=1
+ETH_NODE_ID=1112
+ETH_PROXY_ON_ERROR="true"
+ETH_RPC_GAS_CAP=1000000000000
+ETH_SUPPORTS_STATEDIFF="true"
+ETH_STATEDIFF_TIMEOUT=4m
+
+SERVER_HTTP_PATH=0.0.0.0:8081
+SERVER_GRAPHQL="false"
+SERVER_GRAPHQLPATH=0.0.0.0:8082
+
+METRICS="true"
+PROM_HTTP="true"
+PROM_HTTP_ADDR="0.0.0.0"
+PROM_HTTP_PORT="8090"
+
+VDB_COMMAND="serve"
@@ -1,8 +1,11 @@
 POSTGRES_DB=keycloak
 POSTGRES_USER=keycloak
 POSTGRES_PASSWORD=keycloak
+# Don't change this unless you also change the healthcheck in docker-compose-mainnet-eth-keycloak.yml
+PGPORT=35432
 KC_DB=postgres
 KC_DB_URL_HOST=keycloak-db
+KC_DB_URL_PORT=${PGPORT}
 KC_DB_URL_DATABASE=${POSTGRES_DB}
 KC_DB_USERNAME=${POSTGRES_USER}
 KC_DB_PASSWORD=${POSTGRES_PASSWORD}
@@ -15,42 +15,49 @@ server {
 }

 upstream geth-pool {
-  keepalive 100;
-  hash $user_id consistent;
-  server server-a:8545;
-  server server-b:8545;
-  server server-c:8545;
+  server server-a:8545 max_fails=10 fail_timeout=2s;
+  server server-c:8545 max_fails=10 fail_timeout=2s backup;
+  server server-b:8545 max_fails=10 fail_timeout=2s backup;
+  keepalive 200;
 }

-# self-reg happens on one server for clarity
 upstream reg-ui-pool {
-  keepalive 100;
+  keepalive 2;
  server server-a:8085;
 }

 upstream reg-api-pool {
-  keepalive 100;
+  keepalive 2;
  server server-a:8086;
 }

-# auth uses server-a if available
+# auth uses the reg server when available
 upstream auth-pool {
-  keepalive 100;
+  keepalive 10;
  server server-a:8080;
  server server-b:8080 backup;
  server server-c:8080 backup;
 }

-log_format upstreamlog '[$time_local] $remote_addr $user_id - $server_name $host to: $upstream_addr: $request $status upstream_response_time $upstream_response_time msec $msec request_time $request_time';
-proxy_cache_path                /var/cache/nginx/auth_cache levels=1 keys_zone=auth_cache:1m max_size=5m inactive=60m;
+
+log_format upstreamlog '[$time_local] $msec $remote_addr $user_id - $server_name($host) to $upstream_addr: $request $status upstream_response_time $upstream_response_time request_time $request_time';
+proxy_cache_path /var/cache/nginx/auth_cache levels=1 keys_zone=auth_cache:1m max_size=5m inactive=60m;
+
 server {
    listen 443 ssl http2;
    server_name my.example.com;
+    keepalive_requests 500000;
+    keepalive_timeout 90s;
+    http2_max_requests 5000000;
+    http2_max_concurrent_streams 1024;
+    http2_idle_timeout 3m;
+    http2_recv_timeout 30s;
    access_log /var/log/nginx/my.example.com-access.log upstreamlog;
    error_log /var/log/nginx/my.example.com-error.log;

    ssl_certificate /etc/nginx/ssl/my.example.com/cert.pem;
    ssl_certificate_key /etc/nginx/ssl/my.example.com/key.pem;
+    ssl_session_cache shared:SSL:10m;

    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
@@ -60,7 +67,6 @@ server {
    #rewrite ^/?$ /newuser/;
    rewrite ^/?$ https://www.example.com/;

-
    # geth-pool ETH API
    location ~ ^/v1/eth/?([^/]*)$ {
        set $apiKey $1;
@@ -71,8 +77,8 @@ server {
        auth_request_set $user_id $sent_http_x_user_id;
        rewrite /.*$ / break;

-        client_max_body_size 3m;
-        client_body_buffer_size 3m;
+        client_max_body_size       3m;
+        client_body_buffer_size    3m;
        proxy_buffer_size          32k;
        proxy_buffers              16 32k;
        proxy_busy_buffers_size    96k;
@@ -80,8 +86,10 @@ server {
        proxy_pass  http://geth-pool;
        proxy_set_header X-Original-Remote-Addr $remote_addr;
        proxy_set_header X-User-Id $user_id;
+        proxy_http_version 1.1;
+        proxy_set_header Connection "";
    }
-    
+
    # keycloak
    location = /auth {
        internal;
@@ -95,6 +103,8 @@ server {
        proxy_set_header X-Original-URI $request_uri;
        proxy_set_header X-Original-Remote-Addr $remote_addr;
        proxy_set_header X-Original-Host $host;
+        proxy_http_version 1.1;
+        proxy_set_header Connection "";
    }

    location /newuser/ {
@@ -0,0 +1,75 @@
+# Enable remote debugging using dlv
+CERC_REMOTE_DEBUG=false
+
+# Enable startup script debug output.
+CERC_SCRIPT_DEBUG=false
+
+# Simple toggle to choose either a 'full' node or an 'archive' node
+# (controls the values of --syncmode --gcmode --snapshot)
+CERC_GETH_MODE_QUICK_SET=archive
+
+# Path to plugeth plugins.
+CERC_PLUGINS_DIR="/usr/local/lib/plugeth"
+
+# Will turn on statediffing automatically if CERC_STATEDIFF_DB_HOST exists (see ../mainnet-eth-ipld-eth-db/db.env).
+CERC_RUN_STATEDIFF="detect"
+
+# The minimum necessary verion of the DB to enable statediffing.
+CERC_STATEDIFF_DB_GOOSE_MIN_VER=18
+
+# Whether all statediff-related DB statements should be logged (useful for debugging).
+CERC_STATEDIFF_DB_LOG_STATEMENTS=false
+
+# The number of concurrent workers to process state diff objects
+CERC_STATEDIFF_WORKERS=16
+
+# Each statediffing node should have a unique node ID.
+CERC_STATEDIFF_DB_NODE_ID=1111
+
+# Optional custom node name.
+# GETH_NODE_NAME=""
+
+# Specify any other geth CLI options.
+GETH_OPTS=""
+
+# --cache
+GETH_CACHE=1024
+
+# --cache.database
+GETH_CACHE_DB=50
+
+# --cache.gc
+GETH_CACHE_GC=25
+
+# --cache.trie
+GETH_CACHE_TRIE=15
+
+# --datadir
+GETH_DATADIR="/data"
+
+# --http.api
+GETH_HTTP_API="eth,web3,net"
+
+# --authrpc.jwtsecret
+GETH_JWTSECRET="/etc/mainnet-eth/jwtsecret"
+
+# --maxpeers
+GETH_MAX_PEERS=100
+
+# --rpc.evmtimeout
+GETH_RPC_EVMTIMEOUT=0
+
+# --rpc.gascap
+GETH_RPC_GASCAP=0
+
+# --txlookuplimit
+GETH_TXLOOKUPLIMIT=0
+
+# --verbosity
+GETH_VERBOSITY=3
+
+# --log.vmodule
+GETH_VMODULE="rpc/*=4"
+
+# --ws.api
+GETH_WS_API="eth,web3,net"
@@ -0,0 +1,33 @@
+# Enable startup script debug output.
+CERC_SCRIPT_DEBUG=false
+
+# Specify any other lighthouse CLI options.
+LIGHTHOUSE_OPTS=""
+
+# Override the advertised public IP (optional)
+# --enr-address
+#LIGHTHOUSE_ENR_ADDRESS=""
+
+# --checkpoint-sync-url
+LIGHTHOUSE_CHECKPOINT_SYNC_URL="https://beaconstate.ethstaker.cc"
+
+# --checkpoint-sync-url-timeout
+LIGHTHOUSE_CHECKPOINT_SYNC_URL_TIMEOUT=300
+
+# --datadir
+LIGHTHOUSE_DATADIR=/data
+
+# --debug-level
+LIGHTHOUSE_DEBUG_LEVEL=info
+
+# --http-port
+LIGHTHOUSE_HTTP_PORT=5052
+
+# --execution-jwt
+LIGHTHOUSE_JWTSECRET=/etc/mainnet-eth/jwtsecret
+
+# --metrics-port
+LIGHTHOUSE_METRICS_PORT=5054
+
+# --port --enr-udp-port --enr-tcp-port
+LIGHTHOUSE_NETWORK_PORT=9000
@@ -0,0 +1,121 @@
+#!/bin/sh
+if [[ "true" == "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+
+START_CMD="geth"
+if [[ "true" == "$CERC_REMOTE_DEBUG" ]] && [[ -x "/usr/local/bin/dlv" ]]; then
+    START_CMD="/usr/local/bin/dlv --listen=:40000 --headless=true --api-version=2 --accept-multiclient exec /usr/local/bin/geth --continue --"
+fi
+
+# See https://linuxconfig.org/how-to-propagate-a-signal-to-child-processes-from-a-bash-script
+cleanup() {
+    echo "Signal received, cleaning up..."
+
+    # Kill the child process first (CERC_REMOTE_DEBUG=true uses dlv which starts geth as a child process)
+    pkill -P ${geth_pid}
+    sleep 2
+    kill $(jobs -p)
+
+    wait
+    echo "Done"
+}
+trap 'cleanup' SIGINT SIGTERM
+
+MODE_FLAGS=""
+if [[ "$CERC_GETH_MODE_QUICK_SET" = "archive" ]]; then
+  MODE_FLAGS="--syncmode=${GETH_SYNC_MODE:-full} --gcmode=${GETH_GC_MODE:-archive} --snapshot=${GETH_SNAPSHOT:-false}"
+else
+  MODE_FLAGS="--syncmode=${GETH_SYNC_MODE:-snap} --gcmode=${GETH_GC_MODE:-full} --snapshot=${GETH_SNAPSHOT:-true}"
+fi
+
+if [[ "${CERC_RUN_STATEDIFF}" == "detect" ]] && [[ -n "$CERC_STATEDIFF_DB_HOST" ]]; then
+  dig_result=$(dig $CERC_STATEDIFF_DB_HOST +short)
+  dig_status_code=$?
+  if [[ $dig_status_code = 0 && -n $dig_result ]]; then
+    echo "Statediff DB at $CERC_STATEDIFF_DB_HOST"
+    CERC_RUN_STATEDIFF="true"
+  else
+    echo "No statediff DB available."
+    CERC_RUN_STATEDIFF="false"
+  fi
+fi
+
+STATEDIFF_OPTS=""
+if [[ "${CERC_RUN_STATEDIFF}" == "true" ]]; then
+  ready=0
+  echo "Waiting for statediff DB..."
+  while [ $ready -eq 0 ]; do
+    sleep 1
+    export PGPASSWORD="$CERC_STATEDIFF_DB_PASSWORD"
+    result=$(psql -h "$CERC_STATEDIFF_DB_HOST" \
+      -p "$CERC_STATEDIFF_DB_PORT" \
+      -U "$CERC_STATEDIFF_DB_USER" \
+      -d "$CERC_STATEDIFF_DB_NAME" \
+      -t -c 'select max(version_id) from goose_db_version;' 2>/dev/null | awk '{ print $1 }')
+    if [ -n "$result" ]; then
+      echo "DB ready..."
+      if [[ $result -ge $CERC_STATEDIFF_DB_GOOSE_MIN_VER ]]; then
+        ready=1
+      else
+        echo "DB not at required version (want $CERC_STATEDIFF_DB_GOOSE_MIN_VER, have $result)"
+      fi
+    fi
+  done
+
+  STATEDIFF_OPTS="--statediff \
+  --statediff.db.host=$CERC_STATEDIFF_DB_HOST \
+  --statediff.db.name=$CERC_STATEDIFF_DB_NAME \
+  --statediff.db.nodeid=$CERC_STATEDIFF_DB_NODE_ID \
+  --statediff.db.password=$CERC_STATEDIFF_DB_PASSWORD \
+  --statediff.db.port=$CERC_STATEDIFF_DB_PORT \
+  --statediff.db.user=$CERC_STATEDIFF_DB_USER \
+  --statediff.db.logstatements=${CERC_STATEDIFF_DB_LOG_STATEMENTS:-false} \
+  --statediff.db.copyfrom=${CERC_STATEDIFF_DB_COPY_FROM:-true} \
+  --statediff.waitforsync=${CERC_STATEDIFF_WAIT_FO_SYNC:-true} \
+  --statediff.workers=${CERC_STATEDIFF_WORKERS:-1} \
+  --statediff.writing=${CERC_STATEDIFF_WRITING:-true}"
+
+  if [[ -d "${CERC_PLUGINS_DIR}" ]]; then
+    # With plugeth, we separate the statediff options by prefixing with ' -- '
+    STATEDIFF_OPTS="--pluginsdir "${CERC_PLUGINS_DIR}" -- ${STATEDIFF_OPTS}"
+  fi
+fi
+
+$START_CMD \
+  $MODE_FLAGS \
+  --datadir="${GETH_DATADIR}"\
+  --identity="${GETH_NODE_NAME}" \
+  --maxpeers=${GETH_MAX_PEERS} \
+  --cache=${GETH_CACHE} \
+  --cache.gc=${GETH_CACHE_GC} \
+  --cache.database=${GETH_CACHE_DB} \
+  --cache.trie=${GETH_CACHE_TRIE} \
+  --authrpc.addr='0.0.0.0' \
+  --authrpc.vhosts='*'  \
+  --authrpc.jwtsecret="${GETH_JWTSECRET}" \
+  --http \
+  --http.addr='0.0.0.0' \
+  --http.api="${GETH_HTTP_API}" \
+  --http.vhosts='*' \
+  --metrics \
+  --metrics.addr='0.0.0.0' \
+  --ws \
+  --ws.addr='0.0.0.0' \
+  --ws.api="${GETH_WS_API}" \
+  --rpc.gascap=${GETH_RPC_GASCAP} \
+  --rpc.evmtimeout=${GETH_RPC_EVMTIMEOUT} \
+  --txlookuplimit=${GETH_TXLOOKUPLIMIT} \
+  --verbosity=${GETH_VERBOSITY} \
+  --log.vmodule="${GETH_VMODULE}" \
+  ${STATEDIFF_OPTS} \
+  ${GETH_OPTS} &
+
+geth_pid=$!
+wait $geth_pid
+
+if [[ "true" == "$CERC_KEEP_RUNNING_AFTER_GETH_EXIT" ]]; then
+  while [[ 1 -eq 1 ]]; do
+    sleep 60
+  done
+fi
@@ -0,0 +1,30 @@
+#!/bin/bash
+if [[ "true" == "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+
+ENR_OPTS=""
+if [[ -n "$LIGHTHOUSE_ENR_ADDRESS" ]]; then
+  ENR_OPTS="--enr-address $LIGHTHOUSE_ENR_ADDRESS"
+fi
+
+exec lighthouse bn \
+  --checkpoint-sync-url "$LIGHTHOUSE_CHECKPOINT_SYNC_URL" \
+  --checkpoint-sync-url-timeout ${LIGHTHOUSE_CHECKPOINT_SYNC_URL_TIMEOUT} \
+  --datadir "$LIGHTHOUSE_DATADIR" \
+  --debug-level $LIGHTHOUSE_DEBUG_LEVEL \
+  --disable-deposit-contract-sync \
+  --disable-upnp \
+  --enr-tcp-port $LIGHTHOUSE_NETWORK_PORT \
+  --enr-udp-port $LIGHTHOUSE_NETWORK_PORT \
+  --execution-endpoint "$LIGHTHOUSE_EXECUTION_ENDPOINT" \
+  --execution-jwt /etc/mainnet-eth/jwtsecret \
+  --http \
+  --http-address 0.0.0.0 \
+  --http-port $LIGHTHOUSE_HTTP_PORT \
+  --metrics \
+  --metrics-address=0.0.0.0 \
+  --metrics-port $LIGHTHOUSE_METRICS_PORT \
+  --network mainnet \
+  --port $LIGHTHOUSE_NETWORK_PORT \
+  $ENR_OPTS $LIGHTHOUSE_OPTS
@@ -25,7 +25,7 @@ GETH_CACHE_GC=25

 # --cache.trie
 GETH_CACHE_TRIE=15
-j
+
 # --datadir
 GETH_DATADIR="/data"

@@ -0,0 +1,10 @@
+{
+    "freeQueriesLimit": 10,
+    "freeQueriesList": [],
+    "queries": {
+      "getLogEvents": "50",
+      "getEthLogs": "50",
+      "getEthBlock": "50"
+    },
+    "mutations": {}
+}
@@ -0,0 +1,57 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+erc20_address_file="/app/deployment/erc20-address.json"
+
+echo ETH_RPC_URL=${CERC_ETH_RPC_ENDPOINT} > .env
+echo ACCOUNT_PRIVATE_KEY=${CERC_PRIVATE_KEY_DEPLOYER} >> .env
+
+# Check and keep container running if a deployment already exists (on restarts)
+if [ -f ${erc20_address_file} ]; then
+  echo "${erc20_address_file} already exists, skipping ERC20 contract deployment"
+  cat ${erc20_address_file}
+  
+  # Keep the container running
+  tail -f
+fi
+
+wait_for_chain_endpoint() {
+  # Wait till ETH RPC endpoint is available with block number > 1
+  retry_interval=5
+  while true; do
+    block_number_hex=$(curl -s -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' ${CERC_ETH_RPC_ENDPOINT} | jq -r '.result')
+
+    # Check if the request call was successful
+    if [ $? -ne 0 ]; then
+      echo "RPC endpoint ${CERC_ETH_RPC_ENDPOINT} not yet available, retrying in $retry_interval seconds..."
+      sleep $retry_interval
+      continue
+    fi
+
+    # Convert hex to decimal
+    block_number_dec=$(printf %u ${block_number_hex})
+
+    # Check if block number is > 1 to avoid failures in the deployment
+    if [ "$block_number_dec" -ge 1 ]; then
+      echo "RPC endpoint ${CERC_ETH_RPC_ENDPOINT} is up"
+      break
+    else
+      echo "RPC endpoint ${CERC_ETH_RPC_ENDPOINT} not yet available, retrying in $retry_interval seconds..."
+      sleep $retry_interval
+      continue
+    fi
+  done
+}
+
+wait_for_chain_endpoint
+
+echo "Using CERC_PRIVATE_KEY_DEPLOYER from env"
+
+yarn token:deploy:docker --file ${erc20_address_file}
+
+# Keep the container running
+tail -f
@@ -31,6 +31,21 @@ else
  exit 1
 fi

+# Read ERC20 address from a file
+# Keep retrying until found
+erc20_address_file="/erc20/erc20-address.json"
+echo "Reading ERC20 address from ${erc20_address_file}"
+retry_interval=5
+while true; do
+  if [[ -e "$erc20_address_file" ]]; then
+    ERC20_CONTRACT=$(jq -r '.address' ${erc20_address_file})
+    break
+  else
+    echo "File not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+  fi
+done
+
 echo "Using CERC_PONDER_NITRO_PK from env for Nitro account"
 echo "Using CERC_PONDER_NITRO_CHAIN_PK (account with funds) from env for sending Nitro txs"
 echo "Using ${CERC_PONDER_NITRO_CHAIN_URL} as the RPC endpoint for Nitro txs"
@@ -53,6 +68,10 @@ echo "RELAY_MULTIADDR=\"$CERC_RELAY_MULTIADDR\"" >> "$env_file"
 echo "UPSTREAM_NITRO_ADDRESS=\"$CERC_UPSTREAM_NITRO_ADDRESS\"" >> "$env_file"
 echo "UPSTREAM_NITRO_MULTIADDR=\"$CERC_UPSTREAM_NITRO_MULTIADDR\"" >> "$env_file"
 echo "UPSTREAM_NITRO_PAY_AMOUNT=\"$CERC_UPSTREAM_NITRO_PAY_AMOUNT\"" >> "$env_file"
+echo "INDEXER_GQL_ENDPOINT=\"$CERC_INDEXER_GQL_ENDPOINT\"" >> "$env_file"
+echo "INDEXER_NITRO_ADDRESS=\"$CERC_INDEXER_NITRO_ADDRESS\"" >> "$env_file"
+echo "INDEXER_NITRO_PAY_AMOUNT=\"$CERC_INDEXER_NITRO_PAY_AMOUNT\"" >> "$env_file"
+echo "ERC20_CONTRACT=\"$ERC20_CONTRACT\"" >> "$env_file"

 cat "$env_file"

@@ -1,6 +1,6 @@
-import type { Config } from "@ponder/core";
+import { type Config, AppMode } from "@ponder/core";

-import contractAddresses from "./nitro-addresses.json";
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };

 export const config: Config = {
  networks: [
@@ -34,11 +34,14 @@ export const config: Config = {
      name: "AdventureGold",
      network: "fixturenet",
      abi: "./abis/AdventureGold.json",
-      address: "0x32353A6C91143bfd6C7d363B546e62a9A2489A20",
-      startBlock: 5,
+      address: process.env.ERC20_CONTRACT,
+      startBlock: 1,
      maxBlockRange: 100,
    },
  ],
+  options: {
+    mode: AppMode.Indexer,
+  },
  nitro: {
    privateKey: process.env.PONDER_NITRO_PK!,
    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
@@ -46,5 +49,17 @@ export const config: Config = {
    contractAddresses,
    relayMultiAddr: process.env.RELAY_MULTIADDR!,
    store: "./.ponder/nitro-db",
+    payments: {
+      cache: {
+        maxAccounts: 1000,
+        accountTTLInSecs: 1800,
+        maxVouchersPerAccount: 1000,
+        voucherTTLInSecs: 300,
+        maxPaymentChannels: 10000,
+        paymentChannelTTLInSecs: 1800,
+      },
+      ratesFile: "./base-rates-config.json",
+      requestTimeoutInSecs: 10,
+    },
  },
 };
@@ -0,0 +1,64 @@
+import { type Config, AppMode } from "@ponder/core";
+
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };
+
+export const config: Config = {
+  networks: [
+    {
+      name: "fixturenet",
+      chainId: Number(process.env.PONDER_CHAIN_ID),
+      indexerUrl: process.env.INDEXER_GQL_ENDPOINT,
+      maxRpcRequestConcurrency: 1,
+      pollingInterval: 5000,
+      payments: {
+        nitro: {
+          address: process.env.INDEXER_NITRO_ADDRESS!,
+          fundingAmounts: {
+            // TODO: Pass amounts from env
+            directFund: "1000000000000",
+            virtualFund: "1000000000",
+          },
+        },
+        paidRPCMethods: [
+          "eth_getLogs",
+          "eth_getBlockByNumber",
+          "eth_getBlockByHash",
+        ],
+        amount: process.env.UPSTREAM_NITRO_PAY_AMOUNT!,
+      },
+    },
+  ],
+  contracts: [
+    {
+      name: "AdventureGold",
+      network: "fixturenet",
+      abi: "./abis/AdventureGold.json",
+      address: process.env.ERC20_CONTRACT,
+      startBlock: 1,
+      maxBlockRange: 100,
+    },
+  ],
+  options: {
+    mode: AppMode.Indexer,
+  },
+  nitro: {
+    privateKey: process.env.PONDER_NITRO_PK!,
+    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
+    chainUrl: process.env.PONDER_NITRO_CHAIN_URL!,
+    contractAddresses,
+    relayMultiAddr: process.env.RELAY_MULTIADDR!,
+    store: "./.ponder/nitro-db",
+    payments: {
+      cache: {
+        maxAccounts: 1000,
+        accountTTLInSecs: 1800,
+        maxVouchersPerAccount: 1000,
+        voucherTTLInSecs: 300,
+        maxPaymentChannels: 10000,
+        paymentChannelTTLInSecs: 1800,
+      },
+      ratesFile: "./base-rates-config.json",
+      requestTimeoutInSecs: 10,
+    },
+  },
+};
@@ -0,0 +1,58 @@
+import { type Config, AppMode } from "@ponder/core";
+
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };
+
+export const config: Config = {
+  networks: [
+    {
+      name: "fixturenet",
+      chainId: Number(process.env.PONDER_CHAIN_ID),
+    },
+  ],
+  contracts: [
+    {
+      name: "AdventureGold",
+      network: "fixturenet",
+      abi: "./abis/AdventureGold.json",
+      address: process.env.ERC20_CONTRACT,
+      startBlock: 1,
+      maxBlockRange: 100,
+    },
+  ],
+  options: {
+    mode: AppMode.Watcher,
+  },
+  indexer: {
+    gqlEndpoint: process.env.INDEXER_GQL_ENDPOINT,
+    payments: {
+      nitro: {
+        address: process.env.INDEXER_NITRO_ADDRESS,
+        fundingAmounts: {
+          directFund: "1000000000000",
+          virtualFund: "1000000000",
+        },
+      },
+      amount: process.env.INDEXER_NITRO_PAY_AMOUNT,
+    },
+  },
+  nitro: {
+    privateKey: process.env.PONDER_NITRO_PK!,
+    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
+    chainUrl: process.env.PONDER_NITRO_CHAIN_URL!,
+    contractAddresses,
+    relayMultiAddr: process.env.RELAY_MULTIADDR!,
+    store: "./.ponder/nitro-db",
+    payments: {
+      cache: {
+        maxAccounts: 1000,
+        accountTTLInSecs: 1800,
+        maxVouchersPerAccount: 1000,
+        voucherTTLInSecs: 300,
+        maxPaymentChannels: 10000,
+        paymentChannelTTLInSecs: 1800,
+      },
+      ratesFile: "./base-rates-config.json",
+      requestTimeoutInSecs: 10,
+    },
+  }
+};
@@ -4,7 +4,7 @@
 DEFAULT_CERC_ETH_RPC_ENDPOINT="http://fixturenet-eth-geth-1:8545"

 # ETH RPC endpoint used for queries in the watcher
-DEFAULT_CERC_ETH_RPC_QUERY_ENDPOINT="http://nitro-reverse-payment-proxy:8081"
+DEFAULT_CERC_ETH_RPC_QUERY_ENDPOINT="http://ipld-eth-server-1:8081"

 # ETH RPC endpoint used for mutations in the watcher
 DEFAULT_CERC_ETH_RPC_MUTATION_ENDPOINT="http://fixturenet-eth-geth-1:8545"
@@ -2,4 +2,4 @@
 # Build a local version of the task executor for act-runner
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
-docker build -t cerc/act-runner-task-executor:local -f ${CERC_REPO_BASE_DIR}/hosting/gitea/Dockerfile.task-executor ${build_command_args} ${SCRIPT_DIR}
+docker build -t cerc/act-runner-task-executor:local -f ${CERC_REPO_BASE_DIR}/hosting/act-runner/Dockerfile.task-executor ${build_command_args} ${SCRIPT_DIR}
@@ -20,21 +20,24 @@ if [[ $? -ne 0 ]]; then
  exit 1
 fi

-# Stop geth.
-echo -n "Exporting ethdb.... "
 GETH_CONTAINER=`docker ps -q -f "name=${CERC_SO_COMPOSE_PROJECT}-fixturenet-eth-geth-2-1"`
 if [[ -z "$GETH_CONTAINER" ]]; then
  echo "not found"
  exit 1
 fi

+# Make sure we have the necessary tools
+docker exec $GETH_CONTAINER sh -c 'apk add --no-cache jq curl'
+
+# Gather metadata.
 docker exec $GETH_CONTAINER sh -c 'rm -rf /root/tmp && mkdir -p /root/tmp/export'
 docker exec $GETH_CONTAINER sh -c 'ln -s /opt/testnet/build/el/geth.json /root/tmp/export/genesis.json && ln -s /root/ethdata /root/tmp/export/'
 docker exec $GETH_CONTAINER sh -c 'cat /root/tmp/export/genesis.json | jq ".config" > /root/tmp/export/genesis.config.json'
-
-# Stop geth and zip up ethdb.
 docker exec $GETH_CONTAINER sh -c 'curl -s --location "localhost:8545" --header "Content-Type: application/json" --data "{\"jsonrpc\": \"2.0\", \"id\": 1, \"method\": \"eth_getBlockByNumber\", \"params\": [\"0x0\", false]}" > /root/tmp/export/eth_getBlockByNumber_0x0.json'
 docker exec $GETH_CONTAINER sh -c 'curl -s --location "localhost:8545" --header "Content-Type: application/json" --data "{\"jsonrpc\": \"2.0\", \"id\": 1, \"method\": \"eth_blockNumber\", \"params\": []}" > /root/tmp/export/eth_blockNumber.json'
+
+# Stop geth and zip up ethdb.
+echo -n "Exporting ethdb.... "
 docker exec $GETH_CONTAINER sh -c "killall geth && sleep 2 && tar chzf /root/tmp/ethdb.tgz -C /root/tmp/export ."

 # Copy ethdb to host.
@@ -0,0 +1,16 @@
+FROM golang:1.21-bullseye AS builder
+
+# Copy files into image
+WORKDIR /app
+COPY . .
+
+# Build the binary
+RUN go build -v -o nitro .
+
+# Reduce image size
+FROM debian:bullseye-slim
+RUN apt-get update
+RUN apt-get install -y ca-certificates jq netcat
+RUN rm -rf /var/lib/apt/lists/*
+WORKDIR /app
+COPY --from=builder /app/nitro .
@@ -3,4 +3,6 @@

 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh

-docker build -t cerc/go-nitro:local -f ${CERC_REPO_BASE_DIR}/go-nitro/docker/local/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/go-nitro
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/go-nitro:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/go-nitro
@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+# Build the laconic.com image
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+docker build -t cerc/laconic-dot-com:local -f ${CERC_REPO_BASE_DIR}/laconic.com/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/laconic.com
@@ -54,8 +54,10 @@ RUN yarn global add @cerc-io/laconic-registry-cli

 # Add scripts
 RUN mkdir /scripts
+RUN mkdir /scripts/demo-records
 ENV PATH="${PATH}:/scripts"
 COPY ./create-demo-records.sh /scripts
+COPY ./demo-records /scripts/demo-records
 COPY ./import-key.sh /scripts
 COPY ./import-address.sh /scripts

@@ -4,26 +4,26 @@ set -e
 if [ -n "$CERC_SCRIPT_DEBUG" ]; then
  set -x
 fi
+
 registry_command="laconic cns"
-record_1_filename=demo-record-1.yml
-cat <<EOF > ${record_1_filename}
-record:
-  type: WebsiteRegistrationRecord
-  url: 'https://cerc.io'
-  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
-  build_artifact_cid: QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
-  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
-  version: 1.0.23
-EOF
+demo_records_dir="scripts/demo-records"
+
 # Check we have funds
 funds_response=$(${registry_command} account get --address $(cat my-address.txt))
 funds_balance=$(echo ${funds_response} | jq -r .[0].balance[0].quantity)
 echo "Balance is: ${funds_balance}"
+
 # Create a bond
 bond_create_result=$(${registry_command} bond create --type aphoton --quantity 1000000000)
 bond_id=$(echo ${bond_create_result} | jq -r .bondId)
 echo "Created bond with id: ${bond_id}"
-# Publish a demo record
-publish_response=$(${registry_command} record publish --filename ${record_1_filename} --bond-id ${bond_id})
-published_record_id=$(echo ${publish_response} | jq -r .id)
-echo "Published ${record_1_filename} with id: ${published_record_id}"
+
+## Publish the demo records
+if [ -d $demo_records_dir ]; then
+  for demo_record in "${demo_records_dir}"/*; do
+    publish_response=$(${registry_command} record publish --filename ${demo_record} --bond-id ${bond_id})
+    published_record_id=$(echo ${publish_response} | jq -r .id)
+    echo "Published ${demo_record} with id: ${published_record_id}"
+    cat ${demo_record}
+  done
+fi
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://hello-urbit.laconic.com'
+  repo_registration_record_cid: QmTZQ8ZJS6mALjEM2wY71msFno6zzxFftVCiZELj9xREPx
+  build_artifact_cid: '~lostex-rabdur-labtul-moltev/hello-urbit'
+  tls_cert_cid: QmR1acEmQt7Tjmhp9cFtymie2eFcrHURQKt9kGto1TQTW1
+  version: 0.2.4
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://dev-hello-urbit.laconic.com'
+  repo_registration_record_cid: QmPbKkK7gKojnGAgKAE6bK5qBY8BcYp2YDB1e4b28NxvVv
+  build_artifact_cid: '~lostex-rabdur-labtul-moltev/hello-urbit-dev'
+  tls_cert_cid: QmWbCv4k9Q9P6XptHNJN6EupDyKVLSLRV6W6T2sAYkfBxr
+  version: 0.2.5
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://app.osmosis.zone'
+  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
+  build_artifact_cid: '~larryx-woldyr/osmosis:latest'
+  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
+  version: 1.3.5
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://dev.osmosis.zone'
+  repo_registration_record_cid: QmPbKkK7gKojnGAgKAE6bK5qBY8BcYp2YDB1e4b28NxvVv
+  build_artifact_cid: '~larryx-woldyr/osmosis:dev'
+  tls_cert_cid: QmWbCv4k9Q9P6XptHNJN6EupDyKVLSLRV6W6T2sAYkfBxr
+  version: 1.3.6
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://pwa-1-1-3.iglootools.xyz'
+  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
+  build_artifact_cid: https://ipfs.io/ipfs/QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
+  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
+  version: 1.1.3
@@ -0,0 +1,7 @@
+record:
+  type: WebsiteRegistrationRecord
+  url: 'https://pwa-1-2-3.iglootools.xyz'
+  repo_registration_record_cid: QmVjYQ59z3fuKfYUV1aXhDR82JAKxdqB5JMPfUsHkJUkJq
+  build_artifact_cid: https://ipfs.io/ipfs/QmN2yevgjC92gzGi2BY6Q2yBWmR6JNWQ9yscoPPyy1V2Hv
+  tls_cert_cid: QmTAnmDMSnzqAN3yyXtFD4KpyATkeze62ZkbmXHjJ8xQW8
+  version: 1.2.3
@@ -1,10 +1,8 @@
 #!/usr/bin/env bash
 # Build cerc/plugeth-statediff
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
+# Pass Go auth token if present
+if [[ -n "${CERC_GO_AUTH_TOKEN}" ]]; then
+    build_command_args="${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN}"
 fi
-docker build -t cerc/plugeth-statediff:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth-statediff
+docker build -t cerc/plugeth-statediff:local ${build_command_args} ${CERC_REPO_BASE_DIR}/plugeth-statediff
@@ -0,0 +1,22 @@
+# Using the same golang image as used to build plugeth: https://git.vdb.to/cerc-io/plugeth/src/branch/statediff/Dockerfile
+FROM golang:1.20-alpine3.18 as delve
+
+# Add delve so that we can do remote debugging.
+RUN go install github.com/go-delve/delve/cmd/dlv@latest
+
+FROM cerc/plugeth-statediff:local as statediff
+FROM cerc/plugeth:local as plugeth
+
+FROM alpine:3.18
+
+# Install tools often used in scripting, like bash, wget, and jq.
+RUN apk add --no-cache ca-certificates bash wget curl python3 bind-tools postgresql-client jq
+
+COPY --from=delve /go/bin/dlv /usr/local/bin/
+COPY --from=plugeth /usr/local/bin/geth /usr/local/bin/
+
+# Place all plugeth plugins in /usr/local/lib/plugeth
+COPY --from=statediff  /usr/local/lib/statediff.so /usr/local/lib/plugeth/
+
+EXPOSE 8545 8546 8551 6060 30303 30303/udp 40000
+ENTRYPOINT ["geth"]
@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/cerc-plugeth-with-plugins
+set -x
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/plugeth-with-plugins:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} $SCRIPT_DIR
@@ -1,10 +1,8 @@
 #!/usr/bin/env bash
 # Build cerc/plugeth
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
+# Pass Go auth token if present
+if [[ -n "${CERC_GO_AUTH_TOKEN}" ]]; then
+    build_command_args="${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN}"
 fi
-docker build -t cerc/plugeth:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth
+docker build -t cerc/plugeth:local ${build_command_args} ${CERC_REPO_BASE_DIR}/plugeth
@@ -1,13 +1,10 @@
 FROM node:16.17.1-alpine3.16

-RUN apk --update --no-cache add git python3 alpine-sdk
+RUN apk --update --no-cache add git python3 alpine-sdk bash curl jq

 WORKDIR /app

 COPY . .

-RUN echo "Building watcher-ts" && \
-    git checkout v0.2.19 && \
+RUN echo "Building erc20-watcher-ts" && \
    yarn && yarn build
-
-WORKDIR /app/packages/erc20-watcher
@@ -6,4 +6,4 @@ source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 # See: https://stackoverflow.com/a/246128/1701505
 SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )

-docker build -t cerc/watcher-erc20:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/watcher-ts
+docker build -t cerc/watcher-erc20:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/erc20-watcher-ts
@@ -1,4 +1,4 @@
-FROM node:18.17.1-alpine3.18
+FROM node:18.17.1-alpine3.17

 RUN apk --update --no-cache add git python3 alpine-sdk jq

@@ -14,6 +14,7 @@ cerc/laconic-registry-cli
 cerc/laconic-console-host
 cerc/fixturenet-eth-geth
 cerc/fixturenet-eth-lighthouse
+cerc/fixturenet-eth-genesis
 cerc/watcher-ts
 cerc/watcher-mobymask
 cerc/watcher-erc20
@@ -55,3 +56,4 @@ cerc/go-nitro
 cerc/nitro-contracts
 cerc/mobymask-snap
 cerc/ponder
+cerc/nitro-rpc-client
@@ -38,7 +38,8 @@ fixturenet-sushiswap-subgraph-v3
 watcher-mobymask-v3
 mobymask-app-v3
 go-nitro
+nitro-rpc-client
 nitro-contracts
-nitro-reverse-payment-proxy
 mobymask-snap
 ponder
+ipld-eth-server-payments
@@ -0,0 +1,13 @@
+# act-runner stack
+
+## Example
+
+```
+$ laconic-so --stack act-runner deploy init --output act-runner-1.yml --config CERC_GITEA_RUNNER_REGISTRATION_TOKEN=FOO
+$ laconic-so --stack act-runner deploy create --spec-file act-runner-1.yml --deployment-dir ~/opt/deployments/act-runner-1
+$ laconic-so deployment --dir ~/opt/deployments/act-runner-1 up
+
+$ laconic-so --stack act-runner deploy init --output act-runner-2.yml --config CERC_GITEA_RUNNER_REGISTRATION_TOKEN=BAR
+$ laconic-so --stack act-runner deploy create --spec-file act-runner-2.yml --deployment-dir ~/opt/deployments/act-runner-2
+$ laconic-so deployment --dir ~/opt/deployments/act-runner-2 up
+```
@@ -0,0 +1,15 @@
+version: "1.1"
+name: act-runner
+description: "Local act-runner"
+repos:
+  - git.vdb.to/cerc-io/hosting
+  - gitea.com/gitea/act_runner
+containers:
+  - cerc/act-runner
+  - cerc/act-runner-task-executor
+pods:
+  - name: act-runner
+    repository: cerc-io/hosting
+    path: act-runner
+    pre_start_command: "pre_start.sh"
+    post_start_command: "post_start.sh"
@@ -6,8 +6,10 @@ repos:
  - git.vdb.to/cerc-io/eth-statediff-service@v5
  - git.vdb.to/cerc-io/ipld-eth-db@v5
  - git.vdb.to/cerc-io/ipld-eth-server@v5
+  - git.vdb.to/cerc-io/plugeth@statediff
 containers:
  - cerc/ipld-eth-state-snapshot
  - cerc/eth-statediff-service
  - cerc/ipld-eth-db
  - cerc/ipld-eth-server
+  - cerc/plugeth
@@ -4,8 +4,8 @@ repos:
  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
  - git.vdb.to/cerc-io/ipld-eth-db@v5
  - git.vdb.to/cerc-io/ipld-eth-server@v1.11.6-statediff-v5
-  - github.com/cerc-io/watcher-ts
  - github.com/dboreham/foundry
+  - github.com/cerc-io/erc20-watcher-ts
 containers:
  - cerc/foundry
  - cerc/go-ethereum
@@ -2,14 +2,14 @@ version: "1.1"
 name: fixturenet-laconic-loaded
 description: "A full featured laconic fixturenet"
 repos:
-  - github.com/cerc-io/laconicd
+  - git.vdb.to/cerc-io/laconicd
  - github.com/lirewine/debug
  - github.com/lirewine/crypto
  - github.com/lirewine/gem
  - github.com/lirewine/sdk
-  - github.com/cerc-io/laconic-sdk
-  - github.com/cerc-io/laconic-registry-cli
-  - github.com/cerc-io/laconic-console
+  - git.vdb.to/cerc-io/laconic-sdk
+  - git.vdb.to/cerc-io/laconic-registry-cli
+  - git.vdb.to/cerc-io/laconic-console
 npms:
  - laconic-sdk
  - laconic-registry-cli
@@ -2,9 +2,9 @@ version: "1.0"
 name: fixturenet-laconicd
 description: "A laconicd fixturenet"
 repos:
-  - github.com/cerc-io/laconicd
-  - github.com/cerc-io/laconic-sdk
-  - github.com/cerc-io/laconic-registry-cli
+  - git.vdb.to/cerc-io/laconicd
+  - git.vdb.to/cerc-io/laconic-sdk
+  - git.vdb.to/cerc-io/laconic-registry-cli
 npms:
  - laconic-sdk
  - laconic-registry-cli
@@ -1,5 +1,7 @@
 # fixturenet-payments

+Instructions to setup and deploy an end-to-end fixturenet-payments stack, on a local machine. Some tips are included for running on a remote cloud machine.
+
 ## Setup

 Clone required repositories:
@@ -20,21 +22,48 @@ Deploy the stack:

 ```bash
 laconic-so --stack fixturenet-payments deploy --cluster payments up
+```

+```bash
 # Exposed on host ports:
-# 4005: go-nitro node's RPC endpoint
-# 5005: go-nitro node's p2p endpoint
-# 8081: reverse payment proxy's RPC endpoint
+# 32***: geth in statediffing mode and ipld-eth-server(s)
+# 4005: in-process go-nitro node's RPC endpoint
+# 3005: in-process go-nitro node's p2p TCP endpoint
+# 5005: in-process go-nitro node's p2p WS endpoint
+# 4006: out-of-process go-nitro node's RPC endpoint
+# 3006: out-of-process go-nitro node's p2p TCP endpoint
+# 5006: out-of-process go-nitro node's p2p WS endpoint
 # 15432: MobyMask v3 watcher's db endpoint
 # 3001: MobyMask v3 watcher endpoint
 # 9090: MobyMask v3 watcher relay node endpoint
 # 8080: MobyMask snap
 # 3004: MobyMask v3 app
+# 42070: Ponder indexer-1
+# 42071: Ponder indexer-2
+# 42069: Ponder watcher
 ```

+If running in the cloud, ensure all the of the above ports are open. The geth port can be retrieved with:
+
+```bash
+docker port payments-fixturenet-eth-geth-1-1 8545
+```
+
+Then for every port above, run each line in a new terminal window (or use `screen`):
+
+```bash
+ssh -L 4005:localhost:4005 user@<your-ip>
+ssh -L 5005:localhost:5005 user@<your-ip>
+ssh -L 8081:localhost:8081 user@<your-ip>
+# ... and so on for every port
+```
+
+This will allow you to access the entirety of the app as if it were running locally.
+
 ## Demo

-Follow the [demo](./demo.md) to try out end-to-end payments
+- Follow the [mobymask-demo](./mobymask-demo.md) to try out MobyMask end-to-end payments.
+- Follow the [ponder-demo](./ponder-demo.md) to try out Ponder end-to-end payments.

 ## Clean up

@@ -48,8 +77,8 @@ Clear volumes created by this stack:

 ```bash
 # List all relevant volumes
-docker volume ls -q --filter "name=[payments"
+docker volume ls -q --filter "name=payments"

 # Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=[payments")
+docker volume rm $(docker volume ls -q --filter "name=payments")
 ```
@@ -1,197 +0,0 @@
-# Demo
-
-## MobyMask Watcher
-
-* Check watcher logs and wait for the payment channel to be created with upstream go-nitro node:
-
-  ```bash
-  docker logs -f $(docker ps -aq --filter name="mobymask-watcher-server")
-
-  # Expected output:
-  # vulcanize:server Using rpcProviderEndpoint as chain URL for Nitro node +0ms
-  # ...
-  # ts-nitro:util:nitro Ledger channel created with id 0x65703ccdfacab09ac35367bdbe6c5a337e7a6651aad526807607b1c59b28bc1e
-  # ...
-  # ts-nitro:util:nitro Virtual payment channel created with id 0x29ff1335d73391a50e8fde3e9b34f00c3d81c39ddc7f89187f44dd51df96140e
-  # vulcanize:server Starting server... +0ms
-  ```
-
-* Export the payment channel id to a variable:
-
-  ```bash
-  export WATCHER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
-  ```
-
-* Check the payment channel status:
-
-  ```bash
-  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -h go-nitro -p 4005"
-
-  # Expected output:
-  # {
-  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
-  #   Status: 'Open',
-  #   Balance: {
-  #     AssetAddress: '0x0000000000000000000000000000000000000000',
-  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
-  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
-  #     PaidSoFar: 0n,
-  #     RemainingFunds: 1000000000n
-  #   }
-  # }
-  ```
-
-## MobyMask App
-
-* Track the reverse payment proxy container logs in a terminal:
-
-  ```bash
-  docker logs -f $(docker ps -aq --filter name="nitro-reverse-payment-proxy")
-  ```
-
-* Get the geth node’s port mapped to host:
-
-  ```bash
-  docker port payments-fixturenet-eth-geth-1-1 8545
-  ```
-
-* In MetaMask Flask, add a custom network with the following settings:
-
-  ```bash
-  # New RPC URL
-  http://127.0.0.1:<GETH_PORT>
-
-  # Chain ID
-  1212
-
-  # Currency symbol
-  ETH
-  ```
-
-* Import the faucet account in MetaMask and fund an additional account for usage in the app:
-
-  ```bash
-  # Faucet PK
-  # 0x570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597
-
-  # Clear activity tab for the accounts on chain restart
-  ```
-
-* Get the generated root invite link for the app from MobyMask contract deployment container logs:
-
-  ```bash
-  docker logs -f $(docker ps -aq --filter name="mobymask-1")
-
-  # Expected output:
-  # ...
-  #   "key": "0x60e706fda4639fe0a8eb102cb0ce81231cf6e819f41cb4eadf72d865ea4c11ad"
-  # }
-  # http://127.0.0.1:3004/#/members?invitation=<INVITATION>
-  ```
-
-* Open app in a browser using the invite link
-
-* Run the following in the browser console to enable logs:
-
-  ```bash
-  localStorage.debug = 'ts-nitro:*'
-  # Refresh the tab for taking effect
-  ```
-
-* In the app’s debug panel, check that the peer gets connected to relay node and watcher peer
-
-* Open the `NITRO` tab in debug panel
-  * Click on `Connect Wallet` to connect to MetaMask (make sure that the newly funded account is active)
-  * Click on `Connect Snap` to install/connect snap
-
-* Perform `DIRECT FUND` with the preset amount
-
-* Perform `VIRTUAL FUND` with amount set to `10000`
-
-* Perform phisher status check queries now that a payment channel is created:
-  * Check the watcher logs for received payments
-  * Check the payment proxy server logs for charged RPC requests (`eth_getBlockByHash`, `eth_getBlockByNumber`, `eth_getStorageAt`) made from watcher to upstream ETH server
-
-* Change the amount besides `PAY` button to `>=100` for phisher reports next
-
-* Perform a phisher report and check the watcher logs for received payments; the RPC mutation request is sent to geth node and is not charged
-
-* Check the watcher - eth-server payment channel status after a few requests:
-
-  ```bash
-  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -h go-nitro -p 4005"
-
-  # Expected output ('PaidSoFar' should be non zero):
-  # {
-  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
-  #   Status: 'Open',
-  #   Balance: {
-  #     AssetAddress: '0x0000000000000000000000000000000000000000',
-  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
-  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
-  #     PaidSoFar: 30000n,
-  #     RemainingFunds: 999970000n
-  #   }
-  # }
-  ```
-
-## Ponder App
-
-* Run the ponder app in it's container:
-
-  ```bash
-  docker exec -it payments-ponder-app-1 bash -c "pnpm start"
-
-  # Expected output:
-  # 09:58:54.288 INFO  payment    Creating ledger channel with nitro node 0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE
-  # ...
-  # 09:59:14.230 INFO  payment    Creating payment channel with nitro node 0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE
-  # ...
-  # 09:59:14.329 INFO  payment    Using payment channel 0x10f049519bc3f862e2b26e974be8666886228f30ea54aab06e2f23718afffab0
-  ```
-
-* Export the payment channel id to a variable:
-
-  ```bash
-  export PONDER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
-  ```
-
-* Check the ponder - eth-server payment channel status:
-
-  ```bash
-  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $PONDER_UPSTREAM_PAYMENT_CHANNEL -h go-nitro -p 4005"
-
-  # Expected output ('PaidSoFar' is non zero):
-  # {
-  #   ID: '0x1178ac0f2a43e54a122216fa6afdd30333b590e49e50317a1f9274a591da0f96',
-  #   Status: 'Open',
-  #   Balance: {
-  #     AssetAddress: '0x0000000000000000000000000000000000000000',
-  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
-  #     Payer: '0x67d5b55604d1af90074fcb69b8c51838fff84f8d',
-  #     PaidSoFar: 215000n,
-  #     RemainingFunds: 999785000n
-  #   }
-  # }
-  ```
-
-* Check reverse payment proxy server logs for charged RPC requests made from ponder app to upstream ETH server:
-
-  ```bash
-  # Expected output:
-  # ...
-  # {"time":"2023-09-28T09:59:14.499841999Z","level":"DEBUG","msg":"Request cost","cost-per-byte":1,"response-length":61,"cost":61}
-  # {"time":"2023-09-28T09:59:14.500060006Z","level":"DEBUG","msg":"sent message","address":"0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE","method":"receive_voucher"}
-  # {"time":"2023-09-28T09:59:14.501221898Z","level":"DEBUG","msg":"Received voucher","delta":5000}
-  # {"time":"2023-09-28T09:59:14.501245984Z","level":"DEBUG","msg":"Destination request","url":"http://ipld-eth-server:8081/?method=eth_getLogs"}
-  ```
-
-## Clean Up
-
-* In the MobyMask app, perform `VIRTUAL DEFUND` and `DIRECT DEFUND` (in this order) for closing the payment channel created with watcher
-
-* Run the following in the browser console to delete the Nitro node's data:
-
-  ```bash
-  await clearNodeStorage()
-  ```
@@ -0,0 +1,223 @@
+# Demo
+
+Stack components:
+* `ipld-eth-db` database for statediffed data
+* Local geth + lighthouse blockchain "fixturenet" running in statediffing mode
+* `ipld-eth-server-1` which runs an ETH RPC API and a GQL server; they both serve data from `ipld-eth-db`
+  * It runs an in-process go-nitro node for payments required for configured RPC requests
+* A MobyMask v3 watcher that pays the `ipld-eth-server-1` for ETH RPC requests
+* A MobyMask v3 app that pays the watcher for reads (GQL queries) and writes
+
+## Setup
+
+* On starting the stack, MobyMask watcher creates a payment channel with the `ipld-eth-server-1`'s (in-process) Nitro node. Check watcher logs and wait for the same:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="mobymask-watcher-server")
+
+  # Expected output:
+  # vulcanize:server Peer ID: 12D3KooWKLqLWU82VU7jmsmQMruRvZWhoBoVsf1UHchM5Nuq9ymY
+  # vulcanize:server Using chain URL http://fixturenet-eth-geth-1:8546 for Nitro node
+  # ...
+  # ts-nitro:util:nitro Ledger channel created with id 0x65703ccdfacab09ac35367bdbe6c5a337e7a6651aad526807607b1c59b28bc1e
+  # ...
+  # ts-nitro:util:nitro Virtual payment channel created with id 0x29ff1335d73391a50e8fde3e9b34f00c3d81c39ddc7f89187f44dd51df96140e
+  # vulcanize:server Starting server... +0ms
+  ```
+
+* Keep the above command running to keep track of incoming payments and GQL requests from the MobyMask app
+
+* In another terminal, export the payment channel id to a variable:
+
+  ```bash
+  export WATCHER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
+  ```
+
+* Check the payment channel status:
+
+  ```bash
+  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -s false -h ipld-eth-server-1 -p 4005"
+
+  # Expected output:
+  # {
+  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
+  #   Status: 'Open',
+  #   Balance: {
+  #     AssetAddress: '0x0000000000000000000000000000000000000000',
+  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
+  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
+  #     PaidSoFar: 0n,
+  #     RemainingFunds: 1000000000n
+  #   }
+  # }
+  ```
+
+* In another terminal, check `ipld-eth-server-1`'s logs to keep track of incoming payments and RPC requests from the MobyMask watcher:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="ipld-eth-server-1")
+  ```
+
+* MetaMask flask wallet setup for running the MobyMask app:
+
+  * Get the geth node’s port mapped to host:
+
+    ```bash
+    docker port payments-fixturenet-eth-geth-1-1 8545
+    ```
+
+  * In MetaMask, add a custom network with the following settings:
+
+    ```bash
+    # Network name
+    Local fixturenet
+
+    # New RPC URL
+    http://127.0.0.1:<GETH_PORT>
+
+    # Chain ID
+    1212
+
+    # Currency symbol
+    ETH
+    ```
+
+  * Import a faucet account with the following private key:
+
+    ```bash
+    # Faucet PK
+    # 0x570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597
+    ```
+
+  * Create an additional account for usage in the app; fund it from the faucet account
+
+* Get the generated root invite link for MobyMask from contract deployment container logs:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="mobymask-1")
+
+  # Expected output:
+  # ...
+  #   "key": "0x60e706fda4639fe0a8eb102cb0ce81231cf6e819f41cb4eadf72d865ea4c11ad"
+  # }
+  # http://127.0.0.1:3004/#/members?invitation=<INVITATION>
+  ```
+
+## Run
+
+### MobyMask App
+
+* Open app in a browser (where MetaMask was setup) using the invite link
+
+* Run the following in browser console to enable logs:
+
+  ```bash
+  localStorage.debug = 'ts-nitro:*'
+  # Refresh the tab for taking effect
+  ```
+
+* In the app’s debug panel, check that the peer gets connected to relay node and watcher peer
+
+* Open the `NITRO` tab in debug panel
+  * Click on `Connect Wallet` to connect to MetaMask (make sure that the newly funded account is active)
+  * Click on `Connect Snap` to install/connect snap
+
+* Perform `DIRECT FUND` with the preset amount and wait for the MetaMask confirmation prompt to appear; confirm the transaction and wait for a ledger channel to be created with the watcher
+
+* Perform `VIRTUAL FUND` with amount set to `10000` and wait for a payment channel to be created with the watcher
+
+* Perform phisher status check queries now that a payment channel is created:
+
+  * Check the watcher logs for received payments along with the GQL queries:
+
+    ```bash
+    # Expected output:
+    # ...
+    # laconic:payments Received a payment voucher of 50 from 0x86804299822212c070178B5135Ba6DdAcFC357D3
+    # laconic:payments Serving a paid query for 0x86804299822212c070178B5135Ba6DdAcFC357D3
+    # vulcanize:resolver isPhisher 0x98ae4f9e9d01cc892adfe6871e1db0287039e0c183d3b5bb31d724228c114744 0x2B6AFbd4F479cE4101Df722cF4E05F941523EaD9 TWT:ash1
+    # vulcanize:indexer isPhisher: db miss, fetching from upstream server
+    # laconic:payments Making RPC call: eth_chainId
+    # laconic:payments Making RPC call: eth_getBlockByHash
+    # 2023-10-13T06:33:58.443Z ts-nitro:engine{"msg":"Sent message","_msg":{"to":"0xAAA662","from":"0xBBB676", "payloadSummaries":[],"proposalSummaries":[],"payments":[{"amount":200,"channelId":"0x9a4bdfe03c8e72f368aab07e6bd18f1cd6821170e1a93e59864aad6ee6a853a2"}],"rejectedObjectives":[]}}
+    # laconic:payments Making RPC call: eth_chainId
+    # laconic:payments Making RPC call: eth_getStorageAt
+    # 2023-10-13T06:34:00.483Z ts-nitro:engine {"msg":"Sent message","_msg":{"to":"0xAAA662","from":"0xBBB676",# "payloadSummaries":[],"proposalSummaries":[],"payments":[{"amount":300,"channelId":"0x9a4bdfe03c8e72f368aab07e6bd18f1cd6821170e1a93e59864aad6ee6a853a2"}],"rejectedObjectives":[]}}
+    ```
+
+  * The watcher makes several ETH RPC requests to `ipld-eth-server-1` to fetch data required for satisfying the GQL request(s); check `ipld-eth-server-1` logs for charged RPC requests (`eth_getBlockByHash`, `eth_getBlockByNumber`, `eth_getStorageAt`):
+
+    ```bash
+    # Expected output:
+    # ...
+    # 2023/10/13 06:34:57 INFO Received a voucher payer=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94 amount=100
+    #  2023/10/13 06:34:59 INFO Serving a paid RPC request method=eth_getBlockByHash cost=50 sender=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94
+    #  time="2023-10-13T06:34:59Z" level=debug msg=START api_method=eth_getBlockByHash api_params="[0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d false]" api_reqid=52 conn="192.168.64.4:59644" user_id= uuid=a1893211-6992-11ee-a67a-0242c0a8400c
+    #  WARN [10-13|06:34:59.133] Attempting GerRPCCalls, but default PluginLoader has not been initialized
+    #  time="2023-10-13T06:34:59Z" level=debug msg=END api_method=eth_getBlockByHash api_params="[0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d false]" api_reqid=52 conn="192.168.64.4:59644" duration=5 user_id= uuid=a1893211-6992-11ee-a67a-0242c0a8400c
+    #  2023/10/13 06:34:59 INFO Serving a free RPC request method=eth_chainId
+    #  time="2023-10-13T06:34:59Z" level=debug msg=START api_method=eth_chainId api_params="[]" api_reqid=53 conn="192.168.64.4:59658" user_id= uuid=a18a96d9-6992-11ee-a67a-0242c0a8400c
+    #  time="2023-10-13T06:34:59Z" level=debug msg=END api_method=eth_chainId api_params="[]" api_reqid=53 conn="192.168.64.4:59658" duration=0 user_id= uuid=a18a96d9-6992-11ee-a67a-0242c0a8400c
+    #  2023/10/13 06:34:59 INFO Received a voucher payer=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94 amount=100
+    #  2023/10/13 06:35:01 INFO Serving a paid RPC request method=eth_getStorageAt cost=50 sender=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94
+    #  time="2023-10-13T06:35:01Z" level=debug msg=START api_method=eth_getStorageAt api_params="[0x2b6afbd4f479ce4101df722cf4e05f941523ead9 0xf76621c2cc1c1705fabbc22d30ffc5ded7f26e4995feb8d1c9812a2697ba1278 0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d]" api_reqid=54 conn="192.168.64.4:59660" user_id= uuid=a2bd75d2-6992-11ee-a67a-0242c0a8400c
+    #  time="2023-10-13T06:35:01Z" level=debug msg=END api_method=eth_getStorageAt api_params="[0x2b6afbd4f479ce4101df722cf4e05f941523ead9 0xf76621c2cc1c1705fabbc22d30ffc5ded7f26e4995feb8d1c9812a2697ba1278 0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d]" api_reqid=54 conn="192.168.64.4:59660" duration=7 user_id= uuid=a2bd75d2-6992-11ee-a67a-0242c0a8400c
+    ```
+
+* Change the amount besides `PAY` button in debug panel to `>=100` for phisher reports next
+
+* Perform a phisher report and check the watcher logs for received payments:
+
+  ```bash
+  # Expected output:
+  # ...
+  # vulcanize:libp2p-utils [6:50:2] Received a message on mobymask P2P network from peer: 12D3KooWRkxV9SX8uTUZYkbRjai4Fsn7yavB61J5TMnksixsabsP
+  # ts-nitro:engine {"msg":"Received message","_msg":{"to":"0xBBB676","from":"0x868042","payloadSummaries":[],"proposalSummaries":[],"payments":[{"amount":200,"channelId":"0x557153d729cf3323c0bdb40a36b245f98c2d4562933ba2182c9d61c5cfeda948"}],"rejectedObjectives":[]}}
+  # laconic:payments Received a payment voucher of 100 from 0x86804299822212c070178B5135Ba6DdAcFC357D3
+  # vulcanize:libp2p-utils Payment received for a mutation request from 0x86804299822212c070178B5135Ba6DdAcFC357D3
+  # vulcanize:libp2p-utils Transaction receipt for invoke message {
+  #   to: '0x2B6AFbd4F479cE4101Df722cF4E05F941523EaD9',
+  #   blockNumber: 232,
+  #   blockHash: '0x6a188722c102662ea48af3786fe9db0d4b6c7ab7b27473eb0e628cf95746a244',
+  #   transactionHash: '0x6521205db8a905b3222adc2b6855f9b2abc72580624d299bec2a35bcba173efa',
+  #   effectiveGasPrice: '1500000007',
+  #   gasUsed: '113355'
+  # }
+  ```
+
+* Check the watcher - ipld-eth-server-1 payment channel status after a few requests:
+
+  ```bash
+  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -s false -h ipld-eth-server-1 -p 4005"
+
+  # Expected output ('PaidSoFar' should be non zero):
+  # {
+  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
+  #   Status: 'Open',
+  #   Balance: {
+  #     AssetAddress: '0x0000000000000000000000000000000000000000',
+  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
+  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
+  #     PaidSoFar: 30000n,
+  #     RemainingFunds: 999970000n
+  #   }
+  # }
+  ```
+
+
+## Clean Up
+
+* In the MobyMask app, perform `VIRTUAL DEFUND` and `DIRECT DEFUND` (in order) for closing the payment channel created with watcher
+
+* Run the following in the browser console to delete the Nitro node's data:
+
+  ```bash
+  await clearNodeStorage()
+  ```
+
+* Run the following in the browser console to clear data in local storage:
+  ```bash
+  localStorage.clear()
+  ```
+
+* On a fresh restart, clear activity tab data in MetaMask for concerned accounts
@@ -0,0 +1,267 @@
+# Demo
+
+Stack components:
+* `ipld-eth-db` database for statediffed data
+* Local geth + lighthouse blockchain "fixturenet" running in statediffing mode
+* `ipld-eth-server-2` which runs an ETH RPC API and a GQL server; they both serve data from `ipld-eth-db`
+* A go-nitro deployment acting as the remote Nitro node for `ipld-eth-server-2`
+* Example ERC20 Ponder apps
+  * `ponder-app-indexer-1` that pays the `ipld-eth-server-2` for ETH RPC requests
+  * `ponder-app-indexer-2` that pays `ponder-app-indexer-1` for GQL queries
+  * `ponder-app-watcher` that pays `ponder-app-indexer-2` for GQL queries
+
+## Setup
+
+* In a terminal, check `ipld-eth-server-2`'s logs to keep track of incoming RPC requests from the `ponder-app-indexer-1`:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="ipld-eth-server-2")
+  ```
+
+## Run
+
+### ERC20 Ponder App
+
+* Run the first indexer Ponder app:
+
+  ```bash
+  docker exec -it payments-ponder-app-indexer-1-1 bash -c "DEBUG=laconic:payments pnpm start"
+
+  # Expected output:
+  # 12:57:03.751 INFO  payment    Nitro node setup with address 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d
+  #   laconic:payments Starting voucher subscription... +0ms
+  # ...
+  # 09:58:54.288 INFO  payment    Creating ledger channel with nitro node 0x660a4bEF3fbC863Fcd8D3CDB39242aE513d7D92e ...
+  # 09:59:14.230 INFO  payment    Creating payment channel with nitro node 0x660a4bEF3fbC863Fcd8D3CDB39242aE513d7D92e ...
+  # 09:59:14.329 INFO  payment    Using payment channel 0x1ff59db391b7a55bed723b930ab53c80e7ce857487c1e58771aa5a0737d71625
+  ```
+
+* Export the payment channel id to a variable:
+
+  ```bash
+  export PONDER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
+  ```
+
+* On starting the Ponder app in indexer mode, it creates a payment channel with the `ipld-eth-server-2`'s (external) Nitro node and then starts the historical sync service
+
+* The sync service makes several ETH RPC requests to the `ipld-eth-server-2` to fetch required data; check the `ipld-eth-server-2` logs for charged RPC requests (`eth_getBlockByNumber`, `eth_getLogs`):
+
+  ```bash
+  # Expected output:
+  # ...
+  # 2023/10/18 05:29:38 INFO Serving a paid RPC request method=eth_getBlockByNumber cost=50 sender=0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d
+  # time="2023-10-18T05:29:38Z" level=debug msg=START api_method=eth_getBlockByNumber api_params="[latest true]" api_reqid=0 conn="172.26.0.19:42306" user_id= uuid=54992dc3-6d77-11ee-9ede-0242ac1a000f
+  # WARN [10-18|05:29:38.292] Attempting GerRPCCalls, but default PluginLoader has not been initialized
+  # time="2023-10-18T05:29:38Z" level=debug msg=END api_method=eth_getBlockByNumber api_params="[latest true]" api_reqid=0 conn="172.26.0.19:42306" duration=22 user_id= uuid=54992dc3-6d77-11ee-9ede-0242ac1a000f
+  # ...
+  # 2023/10/18 05:29:40 INFO Serving a paid RPC request method=eth_getLogs cost=50 sender=0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d
+  # WARN [10-18|05:29:40.340] Attempting GerRPCCalls, but default PluginLoader has not been initialized
+  # time="2023-10-18T05:29:40Z" level=debug msg="retrieving log cids for receipt ids"
+  # ...
+  ```
+
+* Check the Ponder - ipld-eth-server-2 payment channel status:
+
+  ```bash
+  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $PONDER_UPSTREAM_PAYMENT_CHANNEL -s false -h go-nitro -p 4006"
+
+  # Expected output ('PaidSoFar' is non zero):
+  # {
+  #   ID: '0x1ff59db391b7a55bed723b930ab53c80e7ce857487c1e58771aa5a0737d71625',
+  #   Status: 'Open',
+  #   Balance: {
+  #     AssetAddress: '0x0000000000000000000000000000000000000000',
+  #     Payee: '0x660a4bef3fbc863fcd8d3cdb39242ae513d7d92e',
+  #     Payer: '0x67d5b55604d1af90074fcb69b8c51838fff84f8d',
+  #     PaidSoFar: 7200n,
+  #     RemainingFunds: 999992800n
+  #   }
+  # }
+  ```
+
+* In another terminal run the second indexer Ponder app:
+
+  ```bash
+  docker exec -it payments-ponder-app-indexer-2-1 bash -c "DEBUG=laconic:payments pnpm start"
+
+  # Expected output:
+  # 08:00:28.701 INFO  payment    Nitro node setup with address 0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01
+  #   laconic:payments Starting voucher subscription... +0ms
+  # ...
+  # 09:58:54.288 INFO  payment    Creating ledger channel with nitro node 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d ...
+  # 09:59:14.230 INFO  payment    Creating payment channel with nitro node 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d ...
+  # 09:59:14.329 INFO  payment    Using payment channel 0xfbf9d7eb7c18446883c7f57f4c94db5607f414a224b3e921c787db07371d2a70
+  ```
+
+* On starting indexer Ponder app, it creates a payment channel with first indexer and then starts the sync services
+
+* Check logs in `ponder-indexer-1` to see payments made from `ponder-indexer-2` from GQL queries to fetch network data
+
+  ```bash
+  # ...
+  #   laconic:payments Received a payment voucher of 100 from 0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01 +23ms
+  #   laconic:payments Serving a paid query for 0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01 +0ms
+  # 13:01:05.671 DEBUG payment    Verified payment for GQL queries getEthLogs
+  #   laconic:payments Received a payment voucher of 100 from 0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01 +20ms
+  #   laconic:payments Serving a paid query for 0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01 +0ms
+  # 13:01:05.691 DEBUG payment    Verified payment for GQL queries getEthBlock
+  # 13:01:07.598 INFO  realtime   Fetched missing blocks [686, 687] (network=fixturenet)
+  # 13:01:07.598 DEBUG realtime   Started processing new head block 686 (network=fixturenet)
+  # ...
+  ```
+
+* Following are the example GQL queries (with payment headers) `ponder-indexer-2` makes to `ponder-indexer-1` for fetching data
+
+  ```graphql
+  {
+    getEthLogs(
+      chainId: 1212,
+      address: "0x6325439389e0797ab35752b4f43a14c004f22a9c",
+      fromBlock: 100,
+      toBlock: 200,
+    ) {
+      address
+      blockHash
+      blockNumber
+      data
+      logIndex
+      removed
+      topics
+      transactionHash
+      transactionIndex 
+    }
+
+    getEthBlock(
+      chainId: 1212,
+      blockNumber: 150,
+      fullTransactions: false
+    ) {
+      baseFeePerGas
+      difficulty
+      extraData
+      gasLimit
+      gasUsed
+      hash
+      logsBloom
+      miner
+      mixHash
+      nonce
+      number
+      parentHash
+      receiptsRoot
+      sha3Uncles
+      size
+      stateRoot
+      timestamp
+      totalDifficulty
+      transactionsRoot
+      txHashes
+    }
+  }
+  ```
+
+* In another terminal run the Ponder app in watcher mode:
+
+  ```bash
+  docker exec -it payments-ponder-app-watcher-1 bash -c "DEBUG=laconic:payments pnpm start"
+
+  # Expected output:
+  # 11:23:22.057 DEBUG app        Started using config file: ponder.config.ts
+  # 08:02:12.548 INFO  payment    Nitro node setup with address 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db
+  #   laconic:payments Starting voucher subscription... +0ms
+  # 08:02:17.417 INFO  payment    Creating ledger channel with nitro node 0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01 ...
+  # 08:02:37.135 INFO  payment    Creating payment channel with nitro node 0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01 ...
+  # 08:02:37.313 INFO  payment    Using payment channel 0xc48622577dfa389283beb19ed946274eb034587d72e61445dc997304be671f1a
+  # ...
+  # 11:23:22.436 INFO  server     Started responding as healthy
+  ```
+
+* Check the terminal of the second indexer Ponder app. Logs of payment for `getLogEvents` queries can be seen:
+
+  ```bash
+  # ...
+  # 08:02:37.763 DEBUG realtime   Finished processing new head block 89 (network=fixturenet)
+  #   laconic:payments Received a payment voucher of 50 from 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +444ms
+  #   laconic:payments Serving a paid query for 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +1ms
+  # 08:02:37.804 DEBUG payment    Verified payment for GQL queries getLogEvents
+  #   laconic:payments Received a payment voucher of 50 from 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +45ms
+  #   laconic:payments Serving a paid query for 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +0ms
+  # 08:02:37.849 DEBUG payment    Verified payment for GQL queries getLogEvents
+  ```
+
+* Following are the example GQL queries (with payment headers) `ponder-watcher` makes to `ponder-indexer-2` for fetching data
+
+  ```graphql
+  getLogEvents(
+    fromTimestamp: 1695303079,
+    toTimestamp: 1695304156,
+    filters: [
+      {
+        name: "AdventureGold"
+        chainId: 1212,
+        address: ["0x6325439389e0797ab35752b4f43a14c004f22a9c"],
+        fromBlock: 100,
+        toBlock: 200,
+        includeEventSelectors: ["0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef"]
+      }
+    ]
+  ) {
+    events {
+      transaction {
+        hash
+      }
+      log {
+        id 
+      }
+      block {
+        number
+      }
+    }
+    metadata {
+      pageEndsAtTimestamp	
+      isLastPage
+    }
+  }
+  ```
+
+* Open watcher Ponder app endpoint http://localhost:42069
+
+  * Try GQL query to see transfer events
+    
+    ```graphql
+    {
+      transferEvents (orderBy: "timestamp", orderDirection: "desc") {
+        id
+        amount
+        from {
+          id
+        }
+        to {
+          id
+        }
+        timestamp
+      }
+    }
+    ```
+
+* Transfer an ERC20 token on chain
+
+  * Get the deployed ERC20 token address
+
+    ```bash
+    export TOKEN_ADDRESS=$(docker exec payments-ponder-er20-contracts-1 jq -r '.address' ./deployment/erc20-address.json)
+    ```
+  
+  * Transfer token
+  
+    ```bash
+    docker exec -it payments-ponder-er20-contracts-1 bash -c "yarn token:transfer:docker --token ${TOKEN_ADDRESS} --to 0xe22AD83A0dE117bA0d03d5E94Eb4E0d80a69C62a --amount 5000"
+    ```
+
+* Wait for a log in watcher Ponder app
+
+  ```bash
+  06:40:47.567 INFO  handlers   Processed 1 event (up to Oct 19, 2023)
+  ```
+
+* Check the GQL query again in http://localhost:42069 to see a new `TransferEvent` entity
@@ -6,19 +6,22 @@ repos:
  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
  - git.vdb.to/cerc-io/lighthouse
  - git.vdb.to/cerc-io/ipld-eth-db@v5
-  - git.vdb.to/cerc-io/ipld-eth-server@v1.11.6-statediff-v5
-  # nitro repos
-  - github.com/cerc-io/ts-nitro@v0.1.13
-  - github.com/cerc-io/go-nitro@v0.1.1-ts-port-0.1.5
+  # ipld-eth-server with payments -- to be used by ipld-eth-server-payments pod
+  - git.vdb.to/cerc-io/ipld-eth-server@payments
+  # nitro repo
+  - github.com/cerc-io/ts-nitro@v0.1.15
+  - github.com/cerc-io/go-nitro@v0.1.2-ts-port-0.1.9
  # mobymask watcher repos
-  - github.com/cerc-io/watcher-ts@v0.2.63
-  - github.com/cerc-io/mobymask-v2-watcher-ts@v0.2.2
+  - github.com/cerc-io/watcher-ts@v0.2.66
+    # this is mobymask-v3
+  - github.com/cerc-io/mobymask-v2-watcher-ts@v0.2.4
  - github.com/cerc-io/MobyMask@v0.1.3
  # mobymask app repos
  - github.com/cerc-io/mobymask-snap
-  - github.com/cerc-io/mobymask-ui@v0.2.0
+  - github.com/cerc-io/mobymask-ui@v0.2.2
  # ponder repo
-  - github.com/cerc-io/ponder@laconic
+  - github.com/cerc-io/ponder@laconic-esm
+  - github.com/cerc-io/erc20-watcher-ts
 containers:
  # fixturenet images
  - cerc/go-ethereum
@@ -41,14 +44,16 @@ containers:
  - cerc/mobymask-ui
  # ponder image
  - cerc/ponder
+  - cerc/watcher-erc20
 pods:
  - fixturenet-eth
-  - ipld-eth-server
+  - ipld-eth-server-payments
  - ipld-eth-db
  - nitro-contracts
  - go-nitro
-  - nitro-reverse-payment-proxy
+  - nitro-rpc-client
  - watcher-mobymask-v3
  - mobymask-snap
  - mobymask-app-v3
-  - ponder
+  - ponder-indexer
+  - ponder-watcher
@@ -12,7 +12,7 @@ See `stacks/fixturenet-eth/README.md` for more information.
 * cerc/tx-spammer

 ## Deploy the stack
-Note: since some Go dependencies are currently private, `CERC_GO_AUTH_TOKEN` must be set to a valid Gitea access token before running the `build-containers` command.
+Note: if there are any private Go dependencies, `CERC_GO_AUTH_TOKEN` must be set to a valid Gitea access token before running the `build-containers` command.
 ```
 $ laconic-so --stack fixturenet-plugeth-tx setup-repositories
 $ laconic-so --stack fixturenet-plugeth-tx build-containers
@@ -0,0 +1,9 @@
+# laconic-dot-com
+
+```
+laconic-so --stack laconic-dot-com setup-repositories
+laconic-so --stack laconic-dot-com build-containers 
+laconic-so --stack laconic-dot-com deploy init --output laconic-website-spec.yml --map-ports-to-host localhost-same
+laconic-so --stack laconic-dot-com deploy create --spec-file laconic-website-spec.yml --deployment-dir lx-website
+laconic-so deployment --dir lx-website start
+```
@@ -0,0 +1,8 @@
+version: "0.1"
+name: laconic-dot-com
+repos:
+  - github.com/LaconicNetwork/laconic.com@v0.0.1
+containers:
+  - cerc/laconic-dot-com
+pods:
+  - laconic-dot-com
@@ -0,0 +1,141 @@
+# mainnet-eth-plugeth
+
+Deploys a "head-tracking" mainnet Ethereum stack comprising a [plugeth](https://git.vdb.to/cerc-io/plugeth) execution layer node and a [lighthouse](https://github.com/sigp/lighthouse) consensus layer node, with [plugeth-statediff](https://git.vdb.to/cerc-io/plugeth-statediff) for statediffing, [ipld-eth-db](https://git.vdb.to/cerc-io/ipld-eth-db) for storage, and [ipld-eth-server](https://git.vdb.to/cerc-io/ipld-eth-server) for indexed ETH IPLD objects.
+
+## Clone required repositories
+
+```
+$ laconic-so --stack mainnet-eth-plugeth setup-repositories
+```
+
+## Build containers
+
+```
+$ laconic-so --stack mainnet-eth-plugeth build-containers
+```
+
+## Create a deployment
+
+```
+$ laconic-so --stack mainnet-eth-plugeth deploy init --map-ports-to-host any-same --output mainnet-eth-plugeth-spec.yml
+$ laconic-so --stack mainnet-eth-plugeth deploy create --spec-file mainnet-eth-plugeth-spec.yml --deployment-dir mainnet-eth-plugeth-deployment
+```
+## Start the stack
+```
+$ laconic-so deployment --dir mainnet-eth-plugeth-deployment start
+```
+Display stack status:
+```
+$ laconic-so deployment --dir mainnet-eth-plugeth-deployment ps
+Running containers:
+id: f39608eca04d72d6b0f1f3acefc5ebb52908da06e221d20c7138f7e3dff5e423, name: laconic-ef641b4d13eb61ed561b19be67063241-foundry-1, ports:
+id: 4052b1eddd886ae0d6b41f9ff22e68a70f267b2bfde10f4b7b79b5bd1eeddcac, name: laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-geth-1-1, ports: 30303/tcp, 30303/udp, 0.0.0.0:49184->40000/tcp, 0.0.0.0:49185->6060/tcp, 0.0.0.0:49186->8545/tcp, 8546/tcp
+id: ac331232e597944b621b3b8942ace5dafb14524302cab338ff946c7f6e5a1d52, name: laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-lighthouse-1-1, ports: 0.0.0.0:49187->8001/tcp
+```
+See stack logs:
+```
+$ laconic-so deployment --dir mainnet-eth-plugeth-deployment logs
+time="2023-07-25T09:46:29-06:00" level=warning msg="The \"CERC_SCRIPT_DEBUG\" variable is not set. Defaulting to a blank string."
+laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-lighthouse-1-1  | Jul 25 15:45:13.362 INFO Logging to file                         path: "/var/lighthouse-data-dir/beacon/logs/beacon.log"
+laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-lighthouse-1-1  | Jul 25 15:45:13.365 INFO Lighthouse started                      version: Lighthouse/v4.1.0-693886b
+laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-lighthouse-1-1  | Jul 25 15:45:13.365 INFO Configured for network                  name: mainnet
+laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-lighthouse-1-1  | Jul 25 15:45:13.366 INFO Data directory initialised              datadir: /var/lighthouse-data-dir
+laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-lighthouse-1-1  | Jul 25 15:45:13.366 INFO Deposit contract                        address: 0x00000000219ab540356cbb839cbe05303d7705fa, deploy_block: 11184524
+laconic-ef641b4d13eb61ed561b19be67063241-mainnet-eth-plugeth-lighthouse-1-1  | Jul 25 15:45:13.424 INFO Starting checkpoint sync                remote_url: https://beaconstate.ethstaker.cc/, service: beacon
+```
+## Monitoring stack sync progress
+Both go-ethereum and lighthouse will engage in an initial chain sync phase that will last up to several hours depending on hardware performance and network capacity.
+Syncing can be monitored by looking for these log messages:
+```
+Jul 24 12:34:17.001 INFO Downloading historical blocks           est_time: 5 days 11 hrs, speed: 14.67 slots/sec, distance: 6932481 slots (137 weeks 3 days), service: slot_notifier
+INFO [07-24|12:14:52.493] Syncing beacon headers                   downloaded=145,920 left=17,617,968 eta=1h23m32.815s
+INFO [07-24|12:33:15.238] Syncing: chain download in progress      synced=1.86% chain=148.94MiB headers=368,640@95.03MiB bodies=330,081@40.56MiB receipts=330,081@13.35MiB eta=37m54.505s
+INFO [07-24|12:35:13.028] Syncing: state download in progress      synced=1.32% state=4.64GiB   accounts=2,850,314@677.57MiB slots=18,663,070@3.87GiB  codes=26662@111.14MiB eta=3h18m0.699s
+```
+Once synced up these log messages will be observed:
+```
+INFO Synced                                  slot: 6952515, block: 0x5bcb…f6d9, epoch: 217266, finalized_epoch: 217264, finalized_root: 0x6342…2c5c, exec_hash: 0x8d8c…2443 (verified), peers: 31, service: slot_notifier
+INFO [07-25|03:04:48.941] Imported new potential chain segment     number=17,767,316 hash=84f6e7..bc2cb0 blocks=1  txs=137  mgas=16.123  elapsed=57.087ms     mgasps=282.434 dirty=461.46MiB
+INFO [07-25|03:04:49.042] Chain head was updated                   number=17,767,316 hash=84f6e7..bc2cb0 root=ca58b2..8258c1 elapsed=2.480111ms
+```
+## Clean up
+
+Stop the stack:
+```
+$ laconic-so deployment --dir mainnet-eth-plugeth-deployment stop
+```
+This leaves data volumes in place, allowing the stack to be subsequently re-started.
+To permanently *delete* the stack's data volumes run:
+```
+$ laconic-so deployment --dir mainnet-eth-plugeth-deployment stop --delete-data-volumes
+```
+After deleting the volumes, any subsequent re-start will begin chain sync from cold.
+
+## Ports
+It is usually necessary to expose certain container ports on one or more the host's addresses to allow incoming connections.
+Any ports defined in the Docker compose file are exposed by default with random port assignments, bound to "any" interface (IP address 0.0.0.0), but the port mappings can be
+customized by editing the "spec" file generated by `laconic-so deploy init`.
+
+In this example, ports `8545` and `5052` have been assigned to a specific addresses/port combination on the host, while
+port `40000` has been left with random assignment:
+```
+$ cat mainnet-eth-plugeth-spec.yml
+stack: mainnet-eth-plugeth
+ports:
+  mainnet-eth-plugeth-geth-1:
+   - '10.10.10.10:8545:8545'
+   - '40000'
+  mainnet-eth-plugeth-lighthouse-1:
+   - '10.10.10.10:5052:5052'
+volumes:
+  mainnet_eth_plugeth_config_data: ./data/mainnet_eth_plugeth_config_data
+  mainnet_eth_plugeth_geth_1_data: ./data/mainnet_eth_plugeth_geth_1_data
+  mainnet_eth_plugeth_lighthouse_1_data: ./data/mainnet_eth_plugeth_lighthouse_1_data
+```
+In addition, a stack-wide port mapping "recipe" can be applied at the time the 
+`laconic-so deploy init` command is run, by supplying the  desired recipe with the `--map-ports-to-host` option. The following recipes are supported:
+| Recipe | Host Port Mapping |
+|--------|-------------------|
+| any-variable-random | Bind to 0.0.0.0 using a random port assigned at start time (default) |
+| localhost-same | Bind to 127.0.0.1 using the same port number as exposed by the containers |
+| any-same | Bind to 0.0.0.0 using the same port number as exposed by the containers |
+| localhost-fixed-random | Bind to 127.0.0.1 using a random port number selected at the time the command is run (not checked for already in use)|
+| any-fixed-random | Bind to 0.0.0.0 using a random port number selected at the time the command is run (not checked for already in use) |
+## Data volumes
+Container data volumes are bind-mounted to specified paths in the host filesystem.
+The default setup (generated by `laconic-so deploy init`) places the volumes in the `./data` subdirectory of the deployment directory:
+```
+$ cat mainnet-eth-plugeth-spec.yml
+stack: mainnet-eth-plugeth
+ports:
+  mainnet-eth-plugeth-geth-1:
+   - '10.10.10.10:8545:8545'
+   - '40000'
+  mainnet-eth-plugeth-lighthouse-1:
+   - '10.10.10.10:5052:5052'
+volumes:
+  mainnet_eth_plugeth_config_data: ./data/mainnet_eth_plugeth_config_data
+  mainnet_eth_plugeth_geth_1_data: ./data/mainnet_eth_plugeth_geth_1_data
+  mainnet_eth_plugeth_lighthouse_1_data: ./data/mainnet_eth_plugeth_lighthouse_1_data
+```
+A synced-up stack will consume around 900GB of data volume space:
+```
+$ sudo du -h mainnet-eth-plugeth-deployment/data/
+150M    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_lighthouse_1_data/beacon/freezer_db
+25G     mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_lighthouse_1_data/beacon/chain_db
+16K     mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_lighthouse_1_data/beacon/network
+368M    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_lighthouse_1_data/beacon/logs
+26G     mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_lighthouse_1_data/beacon
+26G     mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_lighthouse_1_data
+8.0K    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_config_data
+4.0K    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/keystore
+527G    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/geth/chaindata/ancient/chain
+527G    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/geth/chaindata/ancient
+859G    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/geth/chaindata
+4.8M    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/geth/nodes
+242M    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/geth/ethash
+669M    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/geth/triecache
+860G    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data/geth
+860G    mainnet-eth-plugeth-deployment/data/mainnet_eth_plugeth_geth_1_data
+885G    mainnet-eth-plugeth-deployment/data/
+```
@@ -0,0 +1,32 @@
+# Copyright © 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+from secrets import token_hex
+
+
+def init(ctx):
+    return None
+
+
+def setup(ctx):
+    return None
+
+
+def create(ctx, extra_args):
+    # Generate the JWT secret and save to its config file
+    secret = token_hex(32)
+    jwt_file_path = ctx.deployment_dir.joinpath("data", "mainnet_eth_plugeth_config_data", "jwtsecret")
+    with open(jwt_file_path, 'w+') as jwt_file:
+        jwt_file.write(secret)
@@ -0,0 +1,29 @@
+version: "1.2"
+name: mainnet-eth
+description: "Ethereum Mainnet"
+repos:
+  - git.vdb.to/cerc-io/plugeth@statediff
+  - git.vdb.to/cerc-io/plugeth-statediff
+  - git.vdb.to/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/ipld-eth-db@v5
+  - git.vdb.to/cerc-io/ipld-eth-server@v5
+  - git.vdb.to/cerc-io/keycloak-reg-api
+  - git.vdb.to/cerc-io/keycloak-reg-ui
+containers:
+  - cerc/plugeth-statediff
+  - cerc/plugeth
+  - cerc/plugeth-with-plugins
+  - cerc/lighthouse
+  - cerc/lighthouse-cli
+  - cerc/ipld-eth-db
+  - cerc/ipld-eth-server
+  - cerc/keycloak
+  - cerc/webapp-base
+  - cerc/keycloak-reg-api
+  - cerc/keycloak-reg-ui
+pods:
+  - mainnet-eth-plugeth
+  - mainnet-eth-ipld-eth-db
+  - mainnet-eth-ipld-eth-server
+  - mainnet-eth-keycloak
+  - mainnet-eth-metrics
@@ -14,9 +14,9 @@
 # along with this program.  If not, see <http:#www.gnu.org/licenses/>.

 from app.util import get_yaml
-from app.deploy_types import DeployCommandContext, LaconicStackSetupCommand, DeploymentContext
-from app.stack_state import State
-from app.deploy_util import VolumeMapping, run_container_command
+from app.deploy.deploy_types import DeployCommandContext, LaconicStackSetupCommand, DeploymentContext
+from app.deploy.stack_state import State
+from app.deploy.deploy_util import VolumeMapping, run_container_command
 from app.command_types import CommandOptions
 from enum import Enum
 from pathlib import Path
@@ -2,11 +2,11 @@ version: "1.0"
 description: "MobyMask v3 stack"
 name: mobymask-v3
 repos:
-  - github.com/cerc-io/ts-nitrov0.1.12
-  - github.com/cerc-io/watcher-ts@v0.2.57
-  - github.com/cerc-io/mobymask-v2-watcher-ts@v3 # TODO: Update after fixes
+  - github.com/cerc-io/ts-nitro@v0.1.13
+  - github.com/cerc-io/watcher-ts@v0.2.63
+  - github.com/cerc-io/mobymask-v2-watcher-ts@v0.2.2
  - github.com/cerc-io/MobyMask@v0.1.3
-  - github.com/cerc-io/mobymask-ui@v0.2.0
+  - github.com/cerc-io/mobymask-ui@v0.2.1
 containers:
  - cerc/nitro-contracts
  - cerc/watcher-ts
@@ -23,7 +23,7 @@ laconic-so --stack mobymask-v3 build-containers --exclude cerc/mobymask-ui
 Create and update an env file to be used in the next step ([defaults](../../config/watcher-mobymask-v3/mobymask-params.env)):

  ```bash
-  # External ETH RPC endpoint (L2 Optimism geth)
+  # External ETH RPC endpoint for contract(s) deployment
  CERC_ETH_RPC_ENDPOINT=

  # External ETH RPC endpoint used for queries in the watcher
@@ -32,6 +32,9 @@ Create and update an env file to be used in the next step ([defaults](../../conf
  # External ETH RPC endpoint used for mutations in the watcher
  CERC_ETH_RPC_MUTATION_ENDPOINT=

+  # External ETH endpoint used by watcher's Nitro node
+  CERC_NITRO_CHAIN_URL=
+
  # Specify the an account PK for contract deployment
  CERC_PRIVATE_KEY_DEPLOYER=

@@ -2,7 +2,7 @@ version: "1.1"
 name: package-registry
 description: "Local Package Registry"
 repos:
-  - github.com/cerc-io/hosting
+  - git.vdb.to/cerc-io/hosting
  - gitea.com/gitea/act_runner
 containers:
  - cerc/act-runner
@@ -13,3 +13,8 @@ pods:
    path: gitea
    pre_start_command: "run-this-first.sh"
    post_start_command: "initialize-gitea.sh"
+  - name: act-runner
+    repository: cerc-io/hosting
+    path: act-runner
+    pre_start_command: "pre_start.sh"
+    post_start_command: "post_start.sh"
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
iskay	bd8c78e1a3	update fixturenet-plugeth test	2023-11-02 09:26:47 -04:00
telackey	fd5779f967	Fix KeyError accessing config. (#620 )	2023-10-31 12:29:19 -05:00
Ian	d854dd5c81	Update fixturenet-laconicd.yml	2023-10-30 15:44:46 -04:00
Ian	948f9f4287	Merge pull request #611 from cerc-io/iskay/fixturenet-laconicd-test add fixturenet-laconicd test	2023-10-30 11:50:33 -04:00
dboreham	b92d9cd7dd	Update stack README.md to use config directive	2023-10-29 23:16:39 -06:00
dboreham	86076c7ed8	Fix deployer.exec() (#619 )	2023-10-29 22:26:15 -06:00
telackey	8cac598679	Split act-runner into its own pod and offer as a distinct stack. (#612 ) * Split act-runner into its own pod and offer as a distinct stack.	2023-10-27 13:57:13 -05:00
dboreham	6130eab5cb	k8s deploy (#614 )	2023-10-27 10:19:44 -06:00
Ian	f198f43b3a	add newline	2023-10-27 08:48:44 -04:00
iskay	36d1e0eedd	add fixturenet-laconicd test	2023-10-26 17:26:42 -04:00
telackey	0f5b1a097b	Add plugeth to chain-chunker stack (needed for new verify option). (#610 )	2023-10-25 14:47:53 -05:00
telackeyanddboreham	20d633f81c	Plugeth-based full mainnet stack. (#592 ) * Plugeth-based full mainnet stack. --------- Co-authored-by: David Boreham <david@bozemanpass.com>	2023-10-25 14:42:52 -05:00
dboreham	5e36e3e2ae	Turn off long run time test on push/pr unless explicitly triggered (#606 )	2023-10-24 22:28:58 -06:00
dboreham	f7eb8b9a38	Rearrange files (#605 )	2023-10-24 22:13:09 -06:00
dboreham	5b9b12a223	Rename functions to remove compose prefix (#604 )	2023-10-24 16:23:28 -06:00
Ian	567dadef7d	update fixturenet-eth test (#600 )	2023-10-24 16:21:30 -06:00
dboreham	052f0df4b0	Fix execute call parameter (#603 )	2023-10-24 16:16:57 -06:00
dboreham	c51671f786	Trigger CI Job after k8s refactor updates	2023-10-24 14:51:04 -06:00
dboreham	573a19a3b7	k8s refactor (#595 )	2023-10-24 14:44:48 -06:00
Zach	fc051265d8	more demo records for the console (#597 ) * increase gas * create six demo records * print record * use moon * typos * use git.vdb.t * use the right moon * ok	2023-10-24 14:25:25 -04:00
Zach	ddebb9c690	bind only to 127.0.0.1 (#598 )	2023-10-23 10:51:44 -04:00
Zach	fe6c3f92ed	typo (#596 )	2023-10-21 13:37:21 -04:00
Zach	c06be6da81	stack for the laconic.com website (#590 ) * website stack * use a release, update ports * use deployments feature for website	2023-10-21 13:31:47 -04:00
telackey	3291c16466	Update stacks for migrated laconic repos. (#594 )	2023-10-20 11:59:06 -05:00
nabarun	69b071ee7a	Add example GQL queries made in Ponder indexers (#593 ) * Add example GQL queries made in Ponder indexers * Use fixturenet chainId in GQL query	2023-10-19 14:55:07 +05:30
nabarunandShreerang Kale	4a90cedeb2	Run multiple Ponder indexers in payment stack (#588 ) * Separate ponder indexer and ponder watcher and add second ponder indexer * Handle review changes * Update config to point ponder watcher to indexer 2 to indexer 1 * Update Ponder demo * Use deployed ERC20 contract in second Ponder indexer * Add order by timestamp in Ponder watcher app entities query * Upgrade go-nitro version to v0.1.2-ts-port-0.1.9 * Decrease Ponder start block to process contract transfer event at deployment --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-19 12:26:10 +05:30
Zach	2402220273	updates to payments demo (#566 )	2023-10-18 12:23:57 -04:00
Zach	771943864e	build fixturenet payments demo on arm (#564 )	2023-10-18 12:05:09 -04:00
prathamesh0	dd4dd519dd	Add a container for ERC20 contract txs in the payments stack (#591 ) * Add a container for ERC20 contract txs in the payments stack * Use erc20-watcher-ts repo in erc20 stack	2023-10-18 17:40:55 +05:30
prathamesh0	3262ebe4ac	Setup ipld-eth-server communicating with a remote Nitro node (#587 ) * Use durable store for in-process Nitro node * Update setup for external go-nitro node * Add a separate service for ipld-eth-server with remote Nitro node * Update repo branches / versions * Wait for external Nitro node endpoint and update instructions * Update repo branches	2023-10-18 13:51:55 +05:30
telackey	8246e3551f	53: Make sure curl and jq are present in the container. (#585 )	2023-10-17 13:36:43 -05:00
nabarunandShreerang Kale	e26a05f2c7	Add Ponder indexer queries payment config (#586 ) * Add support to pass ratesFile in config * Change branch for ponder to laconic-esm * Fix repo name for ponder --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-17 16:21:40 +05:30
dboreham	f9b102f5fa	Trigger many CI jobs	2023-10-16 09:56:12 -06:00
nabarunandShreerang Kale	7ce40331d8	Remove reverse payment proxy from payments stack (#584 ) * Remove reverse payment proxy service from payment stack * Remove run-reverse-payment-proxy.sh * Remove reverse payment proxy port from readme --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-16 18:15:15 +05:30
dboreham	479a7772f3	Trigger CI Job	2023-10-14 16:13:46 -06:00
prathamesh0	4030c0a0d2	Add a separate pod for ipld-eth-server with payments (#583 ) * Add a separate pod for ipld-eth-server with payments * Wait for nitro contracts to become available	2023-10-14 09:47:55 +05:30
dboreham	ba09043227	Trigger run of fixturenet-eth-plugeth test	2023-10-13 13:56:40 -06:00
dboreham	99f80ddc7c	Trigger fixturenet-eth-plugeth-test CI job	2023-10-13 07:38:27 -06:00
prathamesh0 nabarun Shreerang Kale	246d3d8732	Run go-nitro node in process in ipld-eth-server (#575 ) * Setup ipld-eth-server to run in-process Nitro node * Update watcher version in fixturenet-payments stack * Update upstream nitro multiaddr in watcher setup * Change RPC query endpoint to ipld-eth-server * Update Ponder config to pay ipld-eth-server Nitro node * Separate nitro-rpc-client service and update demo.md * Remove unnecessary volumes * Update ipld-eth-server branch * Fix clean up steps --------- Co-authored-by: Nabarun <nabarun@deepstacksoft.com> Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-13 15:27:17 +05:30
dboreham	a68abe5f5d	Update fixturenet-eth-test Trigger CI job run	2023-10-12 22:42:05 -06:00
dboreham	c3d87692fa	python setup CI action for arm linux (#578 ) * Workaround for missing Python binaries for ARM * Trigger CI job * Add Python install workaround to remaining jobs * Typo	2023-10-12 21:53:47 -06:00
dboreham	61579f0434	Implement scheme for triggering individual CI jobs (#577 ) * Implement scheme for triggering individual CI jobs * Add missing comment	2023-10-12 20:40:39 -06:00
nabarunandShreerang Kale	0bec51e96a	Pay for queries from watcher to indexer mode Ponder apps in payments stack (#573 ) * Use ponder in watcher mode and indexer mode separately in payments stack * Refactor config file and configure env variables for watcher mode * Update demo.md for payments stack * Handle review changes * Setup config to pay for watcher to indexer GQL queries * Fix config in stack for making payments in watcher ponder app * Update demo for payment from watcher to indexer mode Ponder apps * Use laconic-esm brannch for ponder --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-12 14:16:44 +05:30
roysc	f4216419c4	Don't error when CERC_GO_AUTH_TOKEN isn't set (#574 ) * Don't error when CERC_GO_AUTH_TOKEN isn't set * conditionally add ags	2023-10-11 21:24:52 -05:00
dboreham	420b1c292b	Force the stack to be specified (#571 ) * Force the stack to be specified * Fix up test * Remove test for legacy non-stack deploy	2023-10-10 16:13:29 -06:00
dboreham	1446e54f31	Tolerate missing plugin functions (#570 )	2023-10-10 15:32:07 -06:00
dboreham	2486003361	Gitea deployment (#568 ) * First part of deployments for external repos * Generate deployment dir * Create empty config file * Copy script files into deployment * Run scripts in deployment * Refactor * Integrate external plugins * Remove debug output	2023-10-09 14:54:55 -06:00
dboreham	5ec98ee9a1	Add missing container image (#567 )	2023-10-09 12:21:54 -06:00
prathamesh0	8c4ed24dfc	Update mobymask-v3 stack (#563 )	2023-10-09 10:32:57 +05:30
prathamesh0	9e56f6357d	Update demo instructions in fixturenet-payments stack (#560 ) * Update demo instructions * Add expected payment proxy output logs * Wait for chain endpoint to be up before starting go-nitro node	2023-10-06 14:36:10 +05:30
prathamesh0	8770b1df86	Upgrade mobymask-ui version in fixturenet-payments stack (#559 )	2023-10-05 17:58:34 +05:30
				`@@ -0,0 +1,2 @@`
				`Change this file to trigger running the fixturenet-eth-test CI job`