Add ability to run Optimism fixturenet with external L1 endpoint (#273)

* Remove unnecessary todos

* Set option to log commands in shell scripts

* Replace fixturenet-eth dependency with wait on endpoint

* Skip lighthouse node dependency check

* Update all services in the stack

* Use debug flag to enable shell commands logging

* Add bash in op-batcher container

* Update mobymask-v2 instructions

* Update fixturenet-optimism instructions

* Add descriptions for services

* Move ts files to container-build

* Take L1 RPC endpoint from the env file

* Add dev mode restriction for editing env file

Former-commit-id: 2515878eeb

app/data/compose/docker-compose-fixturenet-eth.yml

@@ -24,6 +24,8 @@ services:
     env_file:
       - ../config/fixturenet-eth/fixturenet-eth.env
     image: cerc/fixturenet-eth-geth:local
+    volumes:
+      - fixturenet_geth_accounts:/opt/testnet/build/el
     healthcheck:
       test: ["CMD", "nc", "-v", "localhost", "8545"]
       interval: 30s
@@ -79,7 +81,7 @@ services:
         condition: service_healthy
     ports:
       - "8001"
-  
+
   fixturenet-eth-lighthouse-2:
     hostname: fixturenet-eth-lighthouse-2
     healthcheck:
@@ -101,3 +103,6 @@ services:
         condition: service_started
       fixturenet-eth-geth-2:
         condition: service_healthy
+
+volumes:
+  fixturenet_geth_accounts:

app/data/compose/docker-compose-fixturenet-laconic-console.yml

@@ -0,0 +1,6 @@
+services:
+  laconic-console:
+    restart: unless-stopped
+    image: cerc/laconic-console-host:local
+    ports:
+      - "80"

app/data/compose/docker-compose-fixturenet-laconicd.yml

@@ -13,7 +13,7 @@ services:
       - "6060"
       - "26657"
       - "26656"
-      - "9473"
+      - "9473:9473"
       - "8545"
       - "8546"
       - "9090"

app/data/compose/docker-compose-fixturenet-optimism.yml

@@ -0,0 +1,113 @@
+version: '3.7'
+
+services:
+  # Generates and funds the accounts required when setting up the L2 chain (outputs to volume l2_accounts)
+  # Creates / updates the configuration for L1 contracts deployment
+  # Deploys the L1 smart contracts (outputs to volume l1_deployment)
+  fixturenet-optimism-contracts:
+    hostname: fixturenet-optimism-contracts
+    image: cerc/optimism-contracts:local
+    env_file:
+      - ../config/fixturenet-optimism/l1-params.env
+    # Waits for L1 endpoint to be up before running the script
+    command: |
+      "./wait-for-it.sh -h $${L1_HOST} -p $${L1_PORT} -s -t 60 -- ./run.sh"
+    volumes:
+      - ../config/wait-for-it.sh:/app/packages/contracts-bedrock/wait-for-it.sh
+      - ../container-build/cerc-optimism-contracts/hardhat-tasks/rekey-json.ts:/app/packages/contracts-bedrock/tasks/rekey-json.ts
+      - ../container-build/cerc-optimism-contracts/hardhat-tasks/send-balance.ts:/app/packages/contracts-bedrock/tasks/send-balance.ts
+      - ../config/fixturenet-optimism/optimism-contracts/update-config.js:/app/packages/contracts-bedrock/update-config.js
+      - ../config/fixturenet-optimism/optimism-contracts/run.sh:/app/packages/contracts-bedrock/run.sh
+      - fixturenet_geth_accounts:/geth-accounts:ro
+      - l2_accounts:/l2-accounts
+      - l1_deployment:/app/packages/contracts-bedrock
+    extra_hosts:
+    - "host.docker.internal:host-gateway"
+
+  # Generates the config files required for L2 (outputs to volume op_node_data)
+  op-node-l2-config-gen:
+    image: cerc/optimism-op-node:local
+    depends_on:
+      fixturenet-optimism-contracts:
+        condition: service_completed_successfully
+    env_file:
+      - ../config/fixturenet-optimism/l1-params.env
+    volumes:
+      - ../config/fixturenet-optimism/generate-l2-config.sh:/app/generate-l2-config.sh
+      - l1_deployment:/contracts-bedrock:ro
+      - op_node_data:/app
+    command: ["sh", "/app/generate-l2-config.sh"]
+    extra_hosts:
+    - "host.docker.internal:host-gateway"
+
+  # Initializes and runs the L2 execution client
+  op-geth:
+    image: cerc/optimism-l2geth:local
+    depends_on:
+      op-node-l2-config-gen:
+        condition: service_started
+    volumes:
+      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
+      - op_node_data:/op-node:ro
+      - l2_accounts:/l2-accounts:ro
+    entrypoint: "sh"
+    command: "/run-op-geth.sh"
+    ports:
+      - "8545"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost:8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 10s
+
+  # Runs the L2 consensus client (Sequencer node)
+  op-node:
+    env_file:
+      - ../config/fixturenet-optimism/l1-params.env
+    depends_on:
+      op-geth:
+        condition: service_healthy
+    image: cerc/optimism-op-node:local
+    volumes:
+      - ../config/fixturenet-optimism/run-op-node.sh:/app/run-op-node.sh
+      - op_node_data:/op-node-data:ro
+      - l2_accounts:/l2-accounts:ro
+    command: ["sh", "/app/run-op-node.sh"]
+    ports:
+      - "8547"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost:8547"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 10s
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  # Runs the batcher (takes transactions from the Sequencer and publishes them to L1)
+  op-batcher:
+    env_file:
+      - ../config/fixturenet-optimism/l1-params.env
+    depends_on:
+      op-node:
+        condition: service_healthy
+      op-geth:
+        condition: service_healthy
+    image: cerc/optimism-op-batcher:local
+    volumes:
+      - ../config/wait-for-it.sh:/wait-for-it.sh
+      - ../config/fixturenet-optimism/run-op-batcher.sh:/run-op-batcher.sh
+      - l2_accounts:/l2-accounts:ro
+    entrypoint: ["sh", "-c"]
+    # Waits for L1 endpoint to be up before running the batcher
+    command: |
+      "/wait-for-it.sh -h $${L1_HOST} -p $${L1_PORT} -s -t 60 -- /run-op-batcher.sh"
+    extra_hosts:
+    - "host.docker.internal:host-gateway"
+
+volumes:
+  fixturenet_geth_accounts:
+  l1_deployment:
+  l2_accounts:
+  op_node_data:

app/data/compose/docker-compose-watcher-mobymask-v2.yml

@@ -23,17 +23,24 @@ services:
 
   mobymask:
     restart: unless-stopped
-    depends_on:
-      mobymask-watcher-db:
-        condition: service_healthy
     image: cerc/mobymask:local
     working_dir: /app/packages/server
+    depends_on:
+      op-node:
+        condition: service_healthy
+      op-geth:
+        condition: service_healthy
+    # TODO: Configure env file for ETH RPC URL & private key
     environment:
       - ENV=PROD
-    command: ["sh", "-c", "npm start"]
+    command: ["sh", "./deploy-and-generate-invite.sh"]
     volumes:
-      - ../config/watcher-mobymask-v2/secrets.json:/app/packages/server/secrets.json
+      # TODO: add a script to set RPC endpoint from env
+      #       add manually if running seperately
+      - ../config/watcher-mobymask-v2/secrets-template.json:/app/packages/server/secrets-template.json
+      - ../config/watcher-mobymask-v2/deploy-and-generate-invite.sh:/app/packages/server/deploy-and-generate-invite.sh
       - moby_data_server:/app/packages/server
+      - fixturenet_geth_accounts:/geth-accounts:ro
     healthcheck:
       test: ["CMD", "nc", "-v", "localhost", "3330"]
       interval: 20s
@@ -42,16 +49,25 @@ services:
       start_period: 10s
 
   mobymask-watcher-server:
+    # TODO: pass optimism RPC endpoint
     restart: unless-stopped
     depends_on:
       mobymask-watcher-db:
         condition: service_healthy
+      mobymask:
+        condition: service_healthy
     image: cerc/watcher-mobymask-v2:local
-    command: ["sh", "-c", "yarn server"]
+    command: ["sh", "server-start.sh"]
     volumes:
-      - ../config/watcher-mobymask-v2/watcher.toml:/app/packages/mobymask-v2-watcher/environments/local.toml
+      # TODO: add a script to set RPC endpoint from env
+      #       add manually if running seperately
+      - ../config/watcher-mobymask-v2/watcher-config-template.toml:/app/packages/mobymask-v2-watcher/environments/watcher-config-template.toml
       - ../config/watcher-mobymask-v2/peer.env:/app/packages/peer/.env
       - ../config/watcher-mobymask-v2/relay-id.json:/app/packages/mobymask-v2-watcher/relay-id.json
+      - ../config/watcher-mobymask-v2/peer-id.json:/app/packages/mobymask-v2-watcher/peer-id.json
+      - ../config/watcher-mobymask-v2/server-start.sh:/app/packages/mobymask-v2-watcher/server-start.sh
+      - moby_data_server:/server
+      - fixturenet_geth_accounts:/geth-accounts:ro
     ports:
       - "0.0.0.0:3001:3001"
       - "0.0.0.0:9001:9001"
@@ -63,19 +79,7 @@ services:
       retries: 15
       start_period: 5s
 
-  mobymask-watcher-peer:
-    restart: unless-stopped
-    depends_on:
-      mobymask:
-        condition: service_healthy
-    image: cerc/watcher-mobymask-v2:local
-    command: ["sh", "peer-start.sh"]
-    volumes:
-      - ../config/watcher-mobymask-v2/watcher.toml:/app/packages/mobymask-v2-watcher/environments/local.toml
-      - ../config/watcher-mobymask-v2/peer-id.json:/app/packages/mobymask-v2-watcher/peer-id.json
-      - ../config/watcher-mobymask-v2/peer-start.sh:/app/packages/mobymask-v2-watcher/peer-start.sh
-      - moby_data_server:/server
-
+  # TODO: Move to a separate pod
   mobymask-app:
     depends_on:
       mobymask-watcher-server:
@@ -120,11 +124,4 @@ services:
 volumes:
   mobymask_watcher_db_data:
   moby_data_server:
-
-networks:
-  # https://docs.docker.com/compose/networking/#configure-the-default-network
-  default:
-    # https://docs.docker.com/compose/networking/#use-a-pre-existing-network
-    name: mobymask-v2-network
-    external: true
-
+  fixturenet_geth_accounts:

app/data/config/fixturenet-optimism/generate-l2-config.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+op-node genesis l2 \
+  --deploy-config /contracts-bedrock/deploy-config/getting-started.json \
+  --deployment-dir /contracts-bedrock/deployments/getting-started/ \
+  --outfile.l2 /app/genesis.json \
+  --outfile.rollup /app/rollup.json \
+  --l1-rpc $L1_RPC
+
+openssl rand -hex 32 > /app/jwt.txt

app/data/config/fixturenet-optimism/l1-params.env

@@ -0,0 +1,9 @@
+# Change if pointing to an external L1 endpoint
+L1_RPC="http://fixturenet-eth-geth-1:8545"
+L1_CHAIN_ID=1212
+L1_HOST="fixturenet-eth-geth-1"
+L1_PORT=8545
+L1_ADDRESS=
+L1_PRIV_KEY=
+L1_ADDRESS_2=
+L1_PRIV_KEY_2=

app/data/config/fixturenet-optimism/optimism-contracts/run.sh

@@ -0,0 +1,99 @@
+#!/bin/bash
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+# TODO Support restarts; fixturenet-eth-geth currently starts fresh on a restart
+# Exit if a deployment already exists (on restarts)
+# if [ -d "deployments/getting-started" ]; then
+#     echo "Deployment directory deployments/getting-started already exists, exiting"
+#     exit 0
+# fi
+
+echo "Using L1 RPC endpoint ${L1_RPC}"
+
+# Append tasks/index.ts file
+echo "import './rekey-json'" >> tasks/index.ts
+echo "import './send-balance'" >> tasks/index.ts
+
+# Update the chainId in the hardhat config
+sed -i "/getting-started/ {n; s/.*chainId.*/      chainId: $L1_CHAIN_ID,/}" hardhat.config.ts
+
+# Generate the L2 account addresses
+yarn hardhat rekey-json --output /l2-accounts/keys.json
+
+# Read JSON file into variable
+KEYS_JSON=$(cat /l2-accounts/keys.json)
+
+# Parse JSON into variables
+ADMIN_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Admin.address')
+ADMIN_PRIV_KEY=$(echo "$KEYS_JSON" | jq -r '.Admin.privateKey')
+PROPOSER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Proposer.address')
+BATCHER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Batcher.address')
+SEQUENCER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Sequencer.address')
+
+# Read the private key of L1 accounts
+if [ -f /geth-accounts/accounts.csv ]; then
+  echo "Using L1 account credentials from the mounted volume"
+  L1_ADDRESS=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 2)
+  L1_PRIV_KEY=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
+  L1_ADDRESS_2=$(awk -F, 'NR==2{print $(NF-1)}' /geth-accounts/accounts.csv)
+  L1_PRIV_KEY_2=$(awk -F, 'NR==2{print $NF}' /geth-accounts/accounts.csv)
+else
+  echo "Using L1 account credentials from env"
+fi
+
+# Select a finalized L1 block as the starting point for roll ups
+until FINALIZED_BLOCK=$(cast block finalized --rpc-url "$L1_RPC"); do
+    echo "Waiting for a finalized L1 block to exist, retrying after 10s"
+    sleep 10
+done
+
+L1_BLOCKNUMBER=$(echo "$FINALIZED_BLOCK" | awk '/number/{print $2}')
+L1_BLOCKHASH=$(echo "$FINALIZED_BLOCK" | awk '/hash/{print $2}')
+L1_BLOCKTIMESTAMP=$(echo "$FINALIZED_BLOCK" | awk '/timestamp/{print $2}')
+
+echo "Selected L1 block ${L1_BLOCKNUMBER} as the starting block for roll ups"
+
+# Send balances to the above L2 addresses
+yarn hardhat send-balance --to "${ADMIN_ADDRESS}" --amount 2 --private-key "${L1_PRIV_KEY}" --network getting-started
+yarn hardhat send-balance --to "${PROPOSER_ADDRESS}" --amount 5 --private-key "${L1_PRIV_KEY}" --network getting-started
+yarn hardhat send-balance --to "${BATCHER_ADDRESS}" --amount 1000 --private-key "${L1_PRIV_KEY}" --network getting-started
+
+echo "Balances sent to L2 accounts"
+
+# Update the deployment config
+sed -i 's/"l2OutputOracleStartingTimestamp": TIMESTAMP/"l2OutputOracleStartingTimestamp": '"$L1_BLOCKTIMESTAMP"'/g' deploy-config/getting-started.json
+jq --arg chainid "$L1_CHAIN_ID" '.l1ChainID = ($chainid | tonumber)' deploy-config/getting-started.json > tmp.json && mv tmp.json deploy-config/getting-started.json
+
+node update-config.js deploy-config/getting-started.json "$ADMIN_ADDRESS" "$PROPOSER_ADDRESS" "$BATCHER_ADDRESS" "$SEQUENCER_ADDRESS" "$L1_BLOCKHASH"
+
+echo "Updated the deployment config"
+
+# Create a .env file
+echo "L1_RPC=$L1_RPC" > .env
+echo "PRIVATE_KEY_DEPLOYER=$ADMIN_PRIV_KEY" >> .env
+
+echo "Deploying the L1 smart contracts, this will take a while..."
+
+# Deploy the L1 smart contracts
+yarn hardhat deploy --network getting-started
+
+echo "Deployed the L1 smart contracts"
+
+# Read Proxy contract's JSON and get the address
+PROXY_JSON=$(cat deployments/getting-started/Proxy__OVM_L1StandardBridge.json)
+PROXY_ADDRESS=$(echo "$PROXY_JSON" | jq -r '.address')
+
+# Send balance to the above Proxy contract in L1 for reflecting balance in L2
+# First account
+yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${L1_PRIV_KEY}" --network getting-started
+# Second account
+yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${L1_PRIV_KEY_2}" --network getting-started
+
+echo "Balance sent to Proxy L2 contract"
+echo "Use following accounts for transactions in L2:"
+echo "${L1_ADDRESS}"
+echo "${L1_ADDRESS_2}"
+echo "Done"

app/data/config/fixturenet-optimism/optimism-contracts/update-config.js

@@ -0,0 +1,36 @@
+const fs = require('fs')
+
+// Get the command-line argument
+const configFile = process.argv[2]
+const adminAddress = process.argv[3]
+const proposerAddress = process.argv[4]
+const batcherAddress = process.argv[5]
+const sequencerAddress = process.argv[6]
+const blockHash = process.argv[7]
+
+// Read the JSON file
+const configData = fs.readFileSync(configFile)
+const configObj = JSON.parse(configData)
+
+// Update the finalSystemOwner property with the ADMIN_ADDRESS value
+configObj.finalSystemOwner =
+  configObj.portalGuardian =
+  configObj.controller =
+  configObj.l2OutputOracleChallenger =
+  configObj.proxyAdminOwner =
+  configObj.baseFeeVaultRecipient =
+  configObj.l1FeeVaultRecipient =
+  configObj.sequencerFeeVaultRecipient =
+  configObj.governanceTokenOwner =
+    adminAddress
+
+configObj.l2OutputOracleProposer = proposerAddress
+
+configObj.batchSenderAddress = batcherAddress
+
+configObj.p2pSequencerAddress = sequencerAddress
+
+configObj.l1StartingBlockTag = blockHash
+
+// Write the updated JSON object back to the file
+fs.writeFileSync(configFile, JSON.stringify(configObj, null, 2))

app/data/config/fixturenet-optimism/run-op-batcher.sh

@@ -0,0 +1,24 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+# Get BACTHER_KEY from keys.json
+BATCHER_KEY=$(jq -r '.Batcher.privateKey' /l2-accounts/keys.json | tr -d '"')
+
+op-batcher \
+  --l2-eth-rpc=http://op-geth:8545 \
+  --rollup-rpc=http://op-node:8547 \
+  --poll-interval=1s \
+  --sub-safety-margin=6 \
+  --num-confirmations=1 \
+  --safe-abort-nonce-too-low-count=3 \
+  --resubmission-timeout=30s \
+  --rpc.addr=0.0.0.0 \
+  --rpc.port=8548 \
+  --rpc.enable-admin \
+  --max-channel-duration=1 \
+  --target-l1-tx-size-bytes=2048 \
+  --l1-eth-rpc=$L1_RPC \
+  --private-key=$BATCHER_KEY

app/data/config/fixturenet-optimism/run-op-geth.sh

@@ -0,0 +1,61 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+mkdir datadir
+
+echo "pwd" > datadir/password
+
+# TODO: Add in container build or use other tool
+echo "installing jq"
+apk update && apk add jq
+
+# Get SEQUENCER KEY from keys.json
+SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
+echo $SEQUENCER_KEY > datadir/block-signer-key
+
+geth account import --datadir=datadir --password=datadir/password datadir/block-signer-key
+
+while [ ! -f "/op-node/jwt.txt" ]
+do
+  echo "Config files not created. Checking after 5 seconds."
+  sleep 5
+done
+
+echo "Config files created by op-node, proceeding with script..."
+
+cp /op-node/genesis.json ./
+geth init --datadir=datadir genesis.json
+
+SEQUENCER_ADDRESS=$(jq -r '.Sequencer.address' /l2-accounts/keys.json | tr -d '"')
+echo "SEQUENCER_ADDRESS: ${SEQUENCER_ADDRESS}"
+cp /op-node/jwt.txt ./
+geth \
+  --datadir ./datadir \
+  --http \
+  --http.corsdomain="*" \
+  --http.vhosts="*" \
+  --http.addr=0.0.0.0 \
+  --http.api=web3,debug,eth,txpool,net,engine \
+  --ws \
+  --ws.addr=0.0.0.0 \
+  --ws.port=8546 \
+  --ws.origins="*" \
+  --ws.api=debug,eth,txpool,net,engine \
+  --syncmode=full \
+  --gcmode=full \
+  --nodiscover \
+  --maxpeers=0 \
+  --networkid=42069 \
+  --authrpc.vhosts="*" \
+  --authrpc.addr=0.0.0.0 \
+  --authrpc.port=8551 \
+  --authrpc.jwtsecret=./jwt.txt \
+  --rollup.disabletxpoolgossip=true \
+  --password=./datadir/password \
+  --allow-insecure-unlock \
+  --mine \
+  --miner.etherbase=$SEQUENCER_ADDRESS \
+  --unlock=$SEQUENCER_ADDRESS

app/data/config/fixturenet-optimism/run-op-node.sh

@@ -0,0 +1,23 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+# Get SEQUENCER KEY from keys.json
+SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
+
+op-node \
+  --l2=http://op-geth:8551 \
+  --l2.jwt-secret=/op-node-data/jwt.txt \
+  --sequencer.enabled \
+  --sequencer.l1-confs=3 \
+  --verifier.l1-confs=3 \
+  --rollup.config=/op-node-data/rollup.json \
+  --rpc.addr=0.0.0.0 \
+  --rpc.port=8547 \
+  --p2p.disable \
+  --rpc.enable-admin \
+  --p2p.sequencer.key=$SEQUENCER_KEY \
+  --l1=$L1_RPC \
+  --l1.rpckind=any

app/data/config/wait-for-it.sh

@@ -0,0 +1,182 @@
+#!/usr/bin/env bash
+# Use this script to test if a given TCP host/port are available
+
+WAITFORIT_cmdname=${0##*/}
+
+echoerr() { if [[ $WAITFORIT_QUIET -ne 1 ]]; then echo "$@" 1>&2; fi }
+
+usage()
+{
+    cat << USAGE >&2
+Usage:
+    $WAITFORIT_cmdname host:port [-s] [-t timeout] [-- command args]
+    -h HOST | --host=HOST       Host or IP under test
+    -p PORT | --port=PORT       TCP port under test
+                                Alternatively, you specify the host and port as host:port
+    -s | --strict               Only execute subcommand if the test succeeds
+    -q | --quiet                Don't output any status messages
+    -t TIMEOUT | --timeout=TIMEOUT
+                                Timeout in seconds, zero for no timeout
+    -- COMMAND ARGS             Execute command with args after the test finishes
+USAGE
+    exit 1
+}
+
+wait_for()
+{
+    if [[ $WAITFORIT_TIMEOUT -gt 0 ]]; then
+        echoerr "$WAITFORIT_cmdname: waiting $WAITFORIT_TIMEOUT seconds for $WAITFORIT_HOST:$WAITFORIT_PORT"
+    else
+        echoerr "$WAITFORIT_cmdname: waiting for $WAITFORIT_HOST:$WAITFORIT_PORT without a timeout"
+    fi
+    WAITFORIT_start_ts=$(date +%s)
+    while :
+    do
+        if [[ $WAITFORIT_ISBUSY -eq 1 ]]; then
+            nc -z $WAITFORIT_HOST $WAITFORIT_PORT
+            WAITFORIT_result=$?
+        else
+            (echo -n > /dev/tcp/$WAITFORIT_HOST/$WAITFORIT_PORT) >/dev/null 2>&1
+            WAITFORIT_result=$?
+        fi
+        if [[ $WAITFORIT_result -eq 0 ]]; then
+            WAITFORIT_end_ts=$(date +%s)
+            echoerr "$WAITFORIT_cmdname: $WAITFORIT_HOST:$WAITFORIT_PORT is available after $((WAITFORIT_end_ts - WAITFORIT_start_ts)) seconds"
+            break
+        fi
+        sleep 1
+    done
+    return $WAITFORIT_result
+}
+
+wait_for_wrapper()
+{
+    # In order to support SIGINT during timeout: http://unix.stackexchange.com/a/57692
+    if [[ $WAITFORIT_QUIET -eq 1 ]]; then
+        timeout $WAITFORIT_BUSYTIMEFLAG $WAITFORIT_TIMEOUT $0 --quiet --child --host=$WAITFORIT_HOST --port=$WAITFORIT_PORT --timeout=$WAITFORIT_TIMEOUT &
+    else
+        timeout $WAITFORIT_BUSYTIMEFLAG $WAITFORIT_TIMEOUT $0 --child --host=$WAITFORIT_HOST --port=$WAITFORIT_PORT --timeout=$WAITFORIT_TIMEOUT &
+    fi
+    WAITFORIT_PID=$!
+    trap "kill -INT -$WAITFORIT_PID" INT
+    wait $WAITFORIT_PID
+    WAITFORIT_RESULT=$?
+    if [[ $WAITFORIT_RESULT -ne 0 ]]; then
+        echoerr "$WAITFORIT_cmdname: timeout occurred after waiting $WAITFORIT_TIMEOUT seconds for $WAITFORIT_HOST:$WAITFORIT_PORT"
+    fi
+    return $WAITFORIT_RESULT
+}
+
+# process arguments
+while [[ $# -gt 0 ]]
+do
+    case "$1" in
+        *:* )
+        WAITFORIT_hostport=(${1//:/ })
+        WAITFORIT_HOST=${WAITFORIT_hostport[0]}
+        WAITFORIT_PORT=${WAITFORIT_hostport[1]}
+        shift 1
+        ;;
+        --child)
+        WAITFORIT_CHILD=1
+        shift 1
+        ;;
+        -q | --quiet)
+        WAITFORIT_QUIET=1
+        shift 1
+        ;;
+        -s | --strict)
+        WAITFORIT_STRICT=1
+        shift 1
+        ;;
+        -h)
+        WAITFORIT_HOST="$2"
+        if [[ $WAITFORIT_HOST == "" ]]; then break; fi
+        shift 2
+        ;;
+        --host=*)
+        WAITFORIT_HOST="${1#*=}"
+        shift 1
+        ;;
+        -p)
+        WAITFORIT_PORT="$2"
+        if [[ $WAITFORIT_PORT == "" ]]; then break; fi
+        shift 2
+        ;;
+        --port=*)
+        WAITFORIT_PORT="${1#*=}"
+        shift 1
+        ;;
+        -t)
+        WAITFORIT_TIMEOUT="$2"
+        if [[ $WAITFORIT_TIMEOUT == "" ]]; then break; fi
+        shift 2
+        ;;
+        --timeout=*)
+        WAITFORIT_TIMEOUT="${1#*=}"
+        shift 1
+        ;;
+        --)
+        shift
+        WAITFORIT_CLI=("$@")
+        break
+        ;;
+        --help)
+        usage
+        ;;
+        *)
+        echoerr "Unknown argument: $1"
+        usage
+        ;;
+    esac
+done
+
+if [[ "$WAITFORIT_HOST" == "" || "$WAITFORIT_PORT" == "" ]]; then
+    echoerr "Error: you need to provide a host and port to test."
+    usage
+fi
+
+WAITFORIT_TIMEOUT=${WAITFORIT_TIMEOUT:-15}
+WAITFORIT_STRICT=${WAITFORIT_STRICT:-0}
+WAITFORIT_CHILD=${WAITFORIT_CHILD:-0}
+WAITFORIT_QUIET=${WAITFORIT_QUIET:-0}
+
+# Check to see if timeout is from busybox?
+WAITFORIT_TIMEOUT_PATH=$(type -p timeout)
+WAITFORIT_TIMEOUT_PATH=$(realpath $WAITFORIT_TIMEOUT_PATH 2>/dev/null || readlink -f $WAITFORIT_TIMEOUT_PATH)
+
+WAITFORIT_BUSYTIMEFLAG=""
+if [[ $WAITFORIT_TIMEOUT_PATH =~ "busybox" ]]; then
+    WAITFORIT_ISBUSY=1
+    # Check if busybox timeout uses -t flag
+    # (recent Alpine versions don't support -t anymore)
+    if timeout &>/dev/stdout | grep -q -e '-t '; then
+        WAITFORIT_BUSYTIMEFLAG="-t"
+    fi
+else
+    WAITFORIT_ISBUSY=0
+fi
+
+if [[ $WAITFORIT_CHILD -gt 0 ]]; then
+    wait_for
+    WAITFORIT_RESULT=$?
+    exit $WAITFORIT_RESULT
+else
+    if [[ $WAITFORIT_TIMEOUT -gt 0 ]]; then
+        wait_for_wrapper
+        WAITFORIT_RESULT=$?
+    else
+        wait_for
+        WAITFORIT_RESULT=$?
+    fi
+fi
+
+if [[ $WAITFORIT_CLI != "" ]]; then
+    if [[ $WAITFORIT_RESULT -ne 0 && $WAITFORIT_STRICT -eq 1 ]]; then
+        echoerr "$WAITFORIT_cmdname: strict mode, refusing to execute subprocess"
+        exit $WAITFORIT_RESULT
+    fi
+    exec "${WAITFORIT_CLI[@]}"
+else
+    exit $WAITFORIT_RESULT
+fi

app/data/config/watcher-mobymask-v2/deploy-and-generate-invite.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+set -e
+
+# Read the private key of L1 account to deploy contract
+# TODO: Take from env if /geth-accounts volume doesn't exist to allow using separately running L1
+L1_PRIV_KEY=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
+
+# Set the private key
+jq --arg privateKey "$L1_PRIV_KEY" '.privateKey = ($privateKey)' secrets-template.json > secrets.json
+
+npm start

app/data/config/watcher-mobymask-v2/peer-start.sh

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-# Private key of account with balance
-PRIVATE_KEY=
-
-# Assign deployed contract address from server config
-CONTRACT_ADDRESS=`jq '.address' /server/config.json`
-
-echo 'yarn peer-listener --contract-address <CONTRACT_ADDRESS> --private-key <PRIVATE_KEY>'
-yarn peer-listener --contract-address $CONTRACT_ADDRESS --private-key $PRIVATE_KEY

app/data/config/watcher-mobymask-v2/secrets-template.json

@@ -0,0 +1,5 @@
+{
+    "rpcUrl": "http://op-geth:8545",
+    "privateKey": "",
+    "baseURI": "http://127.0.0.1:3002/#"
+}

app/data/config/watcher-mobymask-v2/secrets.json

@@ -1,5 +0,0 @@
-{
-    "rpcUrl": "http://laconicd:8545",
-    "privateKey": "GENESIS_ACCOUNT_PRIVATE_KEY",
-    "baseURI": "http://127.0.0.1:3002/#"
-}

app/data/config/watcher-mobymask-v2/server-start.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# Assign deployed contract address from server config
+CONTRACT_ADDRESS=$(jq -r '.address' /server/config.json | tr -d '"')
+L1_PRIV_KEY_2=$(awk -F, 'NR==2{print $NF}' /geth-accounts/accounts.csv)
+
+sed "s/REPLACE_WITH_PRIVATE_KEY/${L1_PRIV_KEY_2}/" environments/watcher-config-template.toml > environments/local.toml
+sed -i "s/REPLACE_WITH_CONTRACT_ADDRESS/${CONTRACT_ADDRESS}/" environments/local.toml
+
+echo 'yarn server'
+yarn server

app/data/config/watcher-mobymask-v2/watcher-config-template.toml

@@ -21,7 +21,7 @@
 
   [server.p2p]
     enableRelay = true
-    enablePeer = false
+    enablePeer = true
 
     [server.p2p.relay]
       host = "0.0.0.0"
@@ -36,6 +36,10 @@
       peerIdFile = './peer-id.json'
       enableDebugInfo = true
 
+      [server.p2p.peer.l2TxConfig]
+        privateKey = 'REPLACE_WITH_PRIVATE_KEY'
+        contractAddress = 'REPLACE_WITH_CONTRACT_ADDRESS'
+
 [metrics]
   host = "0.0.0.0"
   port = 9000
@@ -55,7 +59,7 @@
 [upstream]
   [upstream.ethServer]
     gqlApiEndpoint = "http://ipld-eth-server:8083/graphql"
-    rpcProviderEndpoint = "http://laconicd:8545"
+    rpcProviderEndpoint = "http://op-geth:8545"
     blockDelayInMilliSecs = 60000
 
   [upstream.cache]

app/data/container-build/cerc-builder-js/Dockerfile

@@ -17,12 +17,16 @@ ARG NPM_GLOBAL=/usr/local/share/npm-global
 # Add NPM global to PATH.
 ENV PATH=${NPM_GLOBAL}/bin:${PATH}
 
+SHELL ["/bin/bash", "-c"]
+
 RUN \
-    if [ ${CERC_HOST_GID} -ne 1000 ] ; then \
-        groupmod -g ${CERC_HOST_GID} ${USERNAME} ; \
+    # Don't switch container uid/gid if the host uid/gid is 1000 (which means it's already correct),
+    # or root (which won't work anyway) or <= 100 (which also won't work).
+    if [[ ${CERC_HOST_GID} -ne 1000 && ${CERC_HOST_GID} -ne 0 && ${CERC_HOST_GID} -gt 100 ]]; then \
+        groupmod -g ${CERC_HOST_GID} ${USERNAME}; \
     fi \
-    && if [ ${CERC_HOST_UID} -ne 1000 ] ; then \
-        usermod -u ${CERC_HOST_UID} -g ${CERC_HOST_GID} ${USERNAME} && chown ${CERC_HOST_UID}:${CERC_HOST_GID} /home/${USERNAME} ; \
+    && if [[ ${CERC_HOST_UID} -ne 1000 && ${CERC_HOST_UID} -ne 0 && ${CERC_HOST_UID} -gt 100 ]]; then \
+        usermod -u ${CERC_HOST_UID} -g ${CERC_HOST_GID} ${USERNAME} && chown ${CERC_HOST_UID}:${CERC_HOST_GID} /home/${USERNAME}; \
     fi
 
 RUN \

app/data/container-build/cerc-builder-js/yarn-local-registry-fixup.sh

@@ -18,8 +18,9 @@ fi
 set -e
 target_package=$1
 local_npm_registry_url=$2
-# TODO: use jq rather than sed here:
-versioned_target_package=$(grep ${target_package} package.json | sed -e 's#[[:space:]]\{1,\}\"\('${target_package}'\)\":[[:space:]]\{1,\}\"\(.*\)\",#\1@\2#' )
+# Extract the actual version pinned in yarn.lock
+# See: https://stackoverflow.com/questions/60454251/how-to-know-the-version-of-currently-installed-package-from-yarn-lock
+versioned_target_package=$(yarn list --pattern ${target_package} --depth=0 --json --non-interactive --no-progress | jq -r '.data.trees[].name')
 # Use yarn info to get URL checksums etc from the new registry
 yarn_info_output=$(yarn info --json $versioned_target_package 2>/dev/null)
 # First check if the target version actually exists. 

app/data/container-build/cerc-fixturenet-eth-geth/run-el.sh

@@ -68,6 +68,7 @@ else
       --statediff.db.port=$CERC_STATEDIFF_DB_PORT \
       --statediff.db.user=$CERC_STATEDIFF_DB_USER \
       --statediff.db.logstatements=${CERC_STATEDIFF_DB_LOG_STATEMENTS:-false} \
+      --statediff.db.copyfrom=${CERC_STATEDIFF_DB_COPY_FROM:-true} \
       --statediff.waitforsync=true \
       --statediff.writing=true"
     fi
@@ -78,11 +79,16 @@ else
       --http \
       --http.addr="0.0.0.0" \
       --http.vhosts="*" \
-      --http.api="eth,web3,net,admin,personal,debug,statediff" \
+      --http.api="${CERC_GETH_HTTP_APIS:-eth,web3,net,admin,personal,debug,statediff}" \
       --http.corsdomain="*" \
       --authrpc.addr="0.0.0.0" \
       --authrpc.vhosts="*" \
       --authrpc.jwtsecret="/opt/testnet/build/el/jwtsecret" \
+      --ws \
+      --ws.addr="0.0.0.0" \
+      --ws.origins="*" \
+      --ws.api="${CERC_GETH_WS_APIS:-eth,web3,net,admin,personal,debug,statediff}" \
+      --http.corsdomain="*" \
       --networkid="${NETWORK_ID}" \
       --netrestrict="${NETRESTRICT}" \
       --gcmode archive \

app/data/container-build/cerc-laconic-console-host/Dockerfile

@@ -0,0 +1,67 @@
+# Originally from: https://github.com/devcontainers/images/blob/main/src/javascript-node/.devcontainer/Dockerfile
+# [Choice] Node.js version (use -bullseye variants on local arm64/Apple Silicon): 18, 16, 14, 18-bullseye, 16-bullseye, 14-bullseye, 18-buster, 16-buster, 14-buster
+ARG VARIANT=16-bullseye
+FROM node:${VARIANT}
+
+ARG USERNAME=node
+ARG NPM_GLOBAL=/usr/local/share/npm-global
+
+# This container pulls npm packages from a local registry configured via these env vars
+ARG CERC_NPM_URL
+ARG CERC_NPM_AUTH_TOKEN
+
+# Add NPM global to PATH.
+ENV PATH=${NPM_GLOBAL}/bin:${PATH}
+
+RUN \
+    # Configure global npm install location, use group to adapt to UID/GID changes
+    if ! cat /etc/group | grep -e "^npm:" > /dev/null 2>&1; then groupadd -r npm; fi \
+    && usermod -a -G npm ${USERNAME} \
+    && umask 0002 \
+    && mkdir -p ${NPM_GLOBAL} \
+    && touch /usr/local/etc/npmrc \
+    && chown ${USERNAME}:npm ${NPM_GLOBAL} /usr/local/etc/npmrc \
+    && chmod g+s ${NPM_GLOBAL} \
+    && npm config -g set prefix ${NPM_GLOBAL} \
+    && su ${USERNAME} -c "npm config -g set prefix ${NPM_GLOBAL}" \
+    # Install eslint
+    && su ${USERNAME} -c "umask 0002 && npm install -g eslint" \
+    && npm cache clean --force > /dev/null 2>&1
+
+# [Optional] Uncomment this section to install additional OS packages.
+RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
+    && apt-get -y install --no-install-recommends jq
+
+# [Optional] Uncomment if you want to install an additional version of node using nvm
+# ARG EXTRA_NODE_VERSION=10
+# RUN su node -c "source /usr/local/share/nvm/nvm.sh && nvm install ${EXTRA_NODE_VERSION}"
+
+# We do this to get a yq binary from the published container, for the correct architecture we're building here
+COPY --from=docker.io/mikefarah/yq:latest /usr/bin/yq /usr/local/bin/yq
+
+RUN mkdir -p /scripts
+COPY ./apply-webapp-config.sh /scripts
+COPY ./start-serving-app.sh /scripts
+
+# [Optional] Uncomment if you want to install more global node modules
+# RUN su node -c "npm install -g <your-package-list-here>"
+
+# Configure the local npm registry
+RUN npm config set @cerc-io:registry ${CERC_NPM_URL} \
+    && npm config set @lirewine:registry ${CERC_NPM_URL} \
+    && npm config set -- ${CERC_NPM_URL}:_authToken ${CERC_NPM_AUTH_TOKEN}
+
+RUN mkdir -p /config
+COPY ./config.yml /config
+
+# Install simple web server for now (use nginx perhaps later)
+RUN yarn global add http-server
+
+# Globally install the payload web app package
+RUN yarn global add @cerc-io/console-app
+
+# Expose port for http
+EXPOSE 80
+
+# Default command sleeps forever so docker doesn't kill it
+CMD ["/scripts/start-serving-app.sh"]

app/data/container-build/cerc-laconic-console-host/apply-webapp-config.sh

@@ -0,0 +1,34 @@
+#!/usr/bin/env bash
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+    set -x
+fi
+if [[ $# -ne 2 ]]; then
+    echo "Illegal number of parameters" >&2
+    exit 1
+fi
+config_file_name=$1
+webapp_files_dir=$2
+if ![[ -f ${config_file_name} ]]; then
+    echo "Config file ${config_file_name} does not exist" >&2
+    exit 1
+fi
+if ![[ -d ${webapp_files_dir} ]]; then
+    echo "Webapp directory ${webapp_files_dir} does not exist" >&2
+    exit 1
+fi
+# First some magic using yq to translate our yaml config file into an array of key value pairs like:
+# LACONIC_HOSTED_CONFIG_<path-through-objects>=<value>
+readarray -t config_kv_pair_array < <( yq '.. | select(length > 2) | ([path | join("_"), .] | join("=") )' ${config_file_name} | sed 's/^/LACONIC_HOSTED_CONFIG_/' )
+declare -p config_kv_pair_array
+# Then iterate over that kv array making the template substitution in our web app files
+for kv_pair_string in "${config_kv_pair_array[@]}"
+do
+    kv_pair=(${kv_pair_string//=/ })
+    template_string_to_replace=${kv_pair[0]}
+    template_value_to_substitute=${kv_pair[1]}
+    # Run find and sed to do the substitution of one variable over all files
+    # See: https://stackoverflow.com/a/21479607/1701505
+    echo "Substituting: ${template_string_to_replace} = ${template_value_to_substitute}"
+    # Note: we do not escape our strings, on the expectation they do not container the '#' char.
+    find ${webapp_files_dir} -type f -exec sed -i 's#'${template_string_to_replace}'#'${template_value_to_substitute}'#g' {} +
+done

app/data/container-build/cerc-laconic-console-host/build.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/laconic-registry-cli
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/laconic-console-host:local -f ${SCRIPT_DIR}/Dockerfile \
+  --add-host gitea.local:host-gateway \
+  --build-arg CERC_NPM_AUTH_TOKEN --build-arg CERC_NPM_URL ${SCRIPT_DIR}

app/data/container-build/cerc-laconic-console-host/config.yml

@@ -0,0 +1,6 @@
+# Config for laconic-console running in a fixturenet with laconicd
+
+services:
+  wns:
+    server: 'http://localhost:9473/api'
+    webui: 'http://localhost:9473/console'

app/data/container-build/cerc-laconic-console-host/start-serving-app.sh

@@ -0,0 +1,8 @@
+#!/usr/bin/env bash
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+    set -x
+fi
+# TODO: Don't hard wire this:
+webapp_files_dir=/usr/local/share/.config/yarn/global/node_modules/@cerc-io/console-app/dist/production
+/scripts/apply-webapp-config.sh /config/config.yml ${webapp_files_dir}
+http-server -p 80 ${webapp_files_dir}

app/data/container-build/cerc-mobymask/Dockerfile

@@ -1,6 +1,6 @@
 FROM node:16.17.1-alpine3.16
 
-RUN apk --update --no-cache add python3 alpine-sdk
+RUN apk --update --no-cache add python3 alpine-sdk jq
 
 WORKDIR /app
 

app/data/container-build/cerc-optimism-contracts/Dockerfile

@@ -0,0 +1,22 @@
+FROM cerc/foundry:local
+
+# Install node (local foundry is a debian based image)
+RUN apt-get update \
+  && apt-get install -y curl \
+  && curl --silent --location https://deb.nodesource.com/setup_16.x | bash - \
+  && apt-get update \
+  && apt-get install -y nodejs git busybox jq \
+  && node -v
+
+RUN corepack enable \
+  && yarn --version
+
+WORKDIR /app
+
+# Copy optimism repo contents
+COPY . .
+
+RUN echo "Building optimism" && \
+  yarn && yarn build
+
+WORKDIR /app/packages/contracts-bedrock

app/data/container-build/cerc-optimism-contracts/build.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+# Build cerc/optimism-contracts
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/optimism-contracts:local -f ${SCRIPT_DIR}/Dockerfile ${CERC_REPO_BASE_DIR}/optimism

app/data/container-build/cerc-optimism-contracts/hardhat-tasks/rekey-json.ts

@@ -0,0 +1,28 @@
+import fs from 'fs'
+
+import { task } from 'hardhat/config'
+import { hdkey } from 'ethereumjs-wallet'
+import * as bip39 from 'bip39'
+
+task('rekey-json', 'Generates a new set of keys for a test network')
+  .addParam('output', 'JSON file to output accounts to')
+  .setAction(async ({ output: outputFile }) => {
+    const mnemonic = bip39.generateMnemonic()
+    const pathPrefix = "m/44'/60'/0'/0"
+    const labels = ['Admin', 'Proposer', 'Batcher', 'Sequencer']
+    const hdwallet = hdkey.fromMasterSeed(await bip39.mnemonicToSeed(mnemonic))
+
+    const output = {}
+
+    for (let i = 0; i < labels.length; i++) {
+      const label = labels[i]
+      const wallet = hdwallet.derivePath(`${pathPrefix}/${i}`).getWallet()
+      const addr = '0x' + wallet.getAddress().toString('hex')
+      const pk = wallet.getPrivateKey().toString('hex')
+
+      output[label] = { address: addr, privateKey: pk }
+    }
+
+    fs.writeFileSync(outputFile, JSON.stringify(output, null, 2))
+    console.log(`L2 account keys written to ${outputFile}`)
+  })

app/data/container-build/cerc-optimism-contracts/hardhat-tasks/send-balance.ts

@@ -0,0 +1,22 @@
+import { task } from 'hardhat/config'
+import '@nomiclabs/hardhat-ethers'
+import { ethers } from 'ethers'
+
+task('send-balance', 'Sends Ether to a specified Ethereum account')
+  .addParam('to', 'The Ethereum address to send Ether to')
+  .addParam('amount', 'The amount of Ether to send, in Ether')
+  .addParam('privateKey', 'The private key of the sender')
+  .setAction(async ({ to, amount, privateKey }, {}) => {
+    // Open the wallet using sender's private key
+    const provider = new ethers.providers.JsonRpcProvider(`${process.env.L1_RPC}`)
+    const wallet = new ethers.Wallet(privateKey, provider)
+
+    // Send amount to the specified address
+    const tx = await wallet.sendTransaction({
+      to,
+      value: ethers.utils.parseEther(amount),
+    })
+
+    console.log(`Balance sent to: ${to}, from: ${wallet.address}`)
+    console.log(`Transaction hash: ${tx.hash}`)
+  })

app/data/container-build/cerc-optimism-l2geth/build.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+# Build cerc/optimism-l2geth
+docker build -t cerc/optimism-l2geth:local ${CERC_REPO_BASE_DIR}/op-geth

app/data/container-build/cerc-optimism-op-batcher/Dockerfile

@@ -0,0 +1,32 @@
+FROM golang:1.19.0-alpine3.15 as builder
+
+ARG VERSION=v0.0.0
+
+RUN apk add --no-cache make gcc musl-dev linux-headers git jq bash
+
+# build op-batcher with the shared go.mod & go.sum files
+COPY ./op-batcher /app/op-batcher
+COPY ./op-bindings /app/op-bindings
+COPY ./op-node /app/op-node
+COPY ./op-service /app/op-service
+COPY ./op-signer /app/op-signer
+COPY ./go.mod /app/go.mod
+COPY ./go.sum /app/go.sum
+
+COPY ./.git /app/.git
+
+WORKDIR /app/op-batcher
+
+RUN go mod download
+
+ARG TARGETOS TARGETARCH
+
+RUN make op-batcher VERSION="$VERSION" GOOS=$TARGETOS GOARCH=$TARGETARCH
+
+FROM alpine:3.15
+
+RUN apk add --no-cache jq bash
+
+COPY --from=builder /app/op-batcher/bin/op-batcher /usr/local/bin
+
+ENTRYPOINT ["op-batcher"]

app/data/container-build/cerc-optimism-op-batcher/build.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+# Build cerc/optimism-op-batcher
+# TODO: use upstream Dockerfile once its buildx-specific content has been removed
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+docker build -t cerc/optimism-op-batcher:local -f ${SCRIPT_DIR}/Dockerfile ${CERC_REPO_BASE_DIR}/optimism

app/data/container-build/cerc-optimism-op-node/Dockerfile

@@ -0,0 +1,30 @@
+FROM golang:1.19.0-alpine3.15 as builder
+
+ARG VERSION=v0.0.0
+
+RUN apk add --no-cache make gcc musl-dev linux-headers git jq bash
+
+# build op-node with the shared go.mod & go.sum files
+COPY ./op-node /app/op-node
+COPY ./op-chain-ops /app/op-chain-ops
+COPY ./op-service /app/op-service
+COPY ./op-bindings /app/op-bindings
+COPY ./go.mod /app/go.mod
+COPY ./go.sum /app/go.sum
+COPY ./.git /app/.git
+
+WORKDIR /app/op-node
+
+RUN go mod download
+
+ARG TARGETOS TARGETARCH
+
+RUN make op-node VERSION="$VERSION" GOOS=$TARGETOS GOARCH=$TARGETARCH
+
+FROM alpine:3.15
+
+RUN apk add --no-cache openssl jq
+
+COPY --from=builder /app/op-node/bin/op-node /usr/local/bin
+
+CMD ["op-node"]

app/data/container-build/cerc-optimism-op-node/build.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+# Build cerc/optimism-op-node
+# TODO: use upstream Dockerfile once its buildx-specific content has been removed
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+docker build -t cerc/optimism-op-node:local -f ${SCRIPT_DIR}/Dockerfile ${CERC_REPO_BASE_DIR}/optimism

app/data/container-image-list.txt

@@ -11,6 +11,7 @@ cerc/ipld-eth-beacon-indexer
 cerc/ipld-eth-server
 cerc/laconicd
 cerc/laconic-registry-cli
+cerc/laconic-console-host
 cerc/fixturenet-eth-geth
 cerc/fixturenet-eth-lighthouse
 cerc/watcher-mobymask
@@ -30,3 +31,6 @@ cerc/tx-spammer
 cerc/builder-gerbil
 cerc/act-runner
 cerc/act-runner-task-executor
+cerc/optimism-l2geth
+cerc/optimism-op-batcher
+cerc/optimism-op-node

app/data/npm-package-list.txt

@@ -1,5 +1,7 @@
 laconic-sdk
 laconic-registry-cli
-gem
+laconic-console
 debug
 crypto
+sdk
+gem

app/data/pod-list.txt

@@ -22,3 +22,4 @@ keycloak
 tx-spammer
 kubo
 foundry
+fixturenet-optimism

app/data/repository-list.txt

@@ -9,6 +9,7 @@ cerc-io/ipld-eth-beacon-db
 cerc-io/laconicd
 cerc-io/laconic-sdk
 cerc-io/laconic-registry-cli
+cerc-io/laconic-console
 cerc-io/mobymask-watcher
 cerc-io/watcher-ts
 cerc-io/react-peer
@@ -23,4 +24,7 @@ dboreham/foundry
 lirewine/gem
 lirewine/debug
 lirewine/crypto
+lirewine/sdk
 telackey/act_runner
+ethereum-optimism/op-geth
+ethereum-optimism/optimism

app/data/stacks/erc20/stack.yml

@@ -5,7 +5,9 @@ repos:
   - cerc-io/ipld-eth-db
   - cerc-io/ipld-eth-server
   - cerc-io/watcher-ts
+  - dboreham/foundry
 containers:
+  - cerc/foundry
   - cerc/go-ethereum
   - cerc/go-ethereum-foundry
   - cerc/ipld-eth-db

app/data/stacks/fixturenet-eth/stack.yml

@@ -1,9 +1,8 @@
-version: "1.0"
+version: "1.1"
 name: fixturenet-eth
 decription: "Ethereum Fixturenet"
 repos:
   - cerc-io/go-ethereum
-  - cerc-io/tx-spammer
   - dboreham/foundry
 containers:
   - cerc/go-ethereum

app/data/stacks/fixturenet-laconic-loaded/README.md

@@ -0,0 +1,50 @@
+# Laconic Fixturenet (experimental)
+
+Testing a "Loaded" fixturenet with console.
+
+Instructions for deploying a local Laconic blockchain "fixturenet" for development and testing purposes using laconic-stack-orchestrator.
+
+## 1. Install Laconic Stack Orchestrator
+Installation is covered in detail [here](https://github.com/cerc-io/stack-orchestrator#user-mode) but if you're on Linux and already have docker installed it should be as simple as:
+```
+$ mkdir my-working-dir
+$ cd my-working-dir
+$ curl -L -o ./laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+$ chmod +x ./laconic-so
+$ export PATH=$PATH:$(pwd)  # Or move laconic-so to ~/bin or your favorite on-path directory
+```
+## 2. Prepare the local build environment
+Note that this step needs only to be done once on a new machine. 
+Detailed instructions can be found [here](../build-support/README.md). For the impatient run these commands:
+```
+$ laconic-so --stack build-support build-containers --exclude cerc/builder-gerbil
+$ laconic-so --stack package-registry setup-repositories
+$ laconic-so --stack package-registry deploy-system up
+```
+Then add the localhost alias `gitea.local` and set `CERC_NPM_AUTH_TOKEN` to the token printed when the package-registry stack was deployed above:
+```
+$ sudo vi /etc/hosts
+$ export CERC_NPM_AUTH_TOKEN=<my-token>
+```
+
+## 3. Clone required repositories
+```
+$ laconic-so --stack fixturenet-laconicd setup-repositories
+```
+## 4. Build the stack's packages and containers
+```
+$ laconic-so --stack fixturenet-laconicd build-npms
+$ laconic-so --stack fixturenet-laconicd build-containers
+```
+## 5. Deploy the stack
+```
+$ laconic-so --stack fixturenet-laconicd deploy up
+```
+Correct operation should be verified by checking the laconicd container's logs with:
+```
+$ laconic-so --stack fixturenet-laconicd deploy logs
+```
+## 6. Test with the Registry CLI
+```
+$ laconic-so --stack fixturenet-laconicd deploy exec cli "laconic cns status"
+```

app/data/stacks/fixturenet-laconic-loaded/stack.yml

@@ -0,0 +1,30 @@
+version: "1.0"
+name: fixturenet-laconic-loaded
+description: "A full featured laconic fixturenet"
+repos:
+  - cerc-io/laconicd
+  - lirewine/debug
+  - lirewine/crypto
+  - lirewine/gem
+  - lirewine/sdk
+  - cerc-io/laconic-sdk
+  - cerc-io/laconic-registry-cli
+  - cerc-io/laconic-console
+npms:
+  - laconic-sdk
+  - laconic-registry-cli
+  - debug
+  - crypto
+  - sdk
+  - gem
+  - laconic-console
+containers:
+  - cerc/laconicd
+  - cerc/laconic-registry-cli
+  - cerc/laconic-console-host
+pods:
+  - fixturenet-laconicd
+  - fixturenet-laconic-console
+config:
+  cli:
+    key: laconicd.mykey

app/data/stacks/fixturenet-optimism/README.md

@@ -0,0 +1,104 @@
+# fixturenet-optimism
+
+Instructions to setup and deploy an end-to-end L1+L2 stack with [fixturenet-eth](../fixturenet-eth/) (L1) and [Optimism](https://stack.optimism.io) (L2)
+
+## Setup
+
+Clone required repositories:
+
+```bash
+laconic-so --stack fixturenet-optimism setup-repositories
+
+# Exclude cerc-io/go-ethereum repository if running L1 separately
+laconic-so --stack fixturenet-optimism setup-repositories --exclude cerc-io/go-ethereum
+```
+
+Checkout to the required versions and branches in repos:
+
+```bash
+# Optimism
+cd ~/cerc/optimism
+git checkout @eth-optimism/sdk@0.0.0-20230329025055
+```
+
+Build the container images:
+
+```bash
+laconic-so --stack fixturenet-optimism build-containers
+
+# Only build containers required for L2 if running L1 separately
+laconic-so --stack fixturenet-optimism build-containers --include cerc/foundry,cerc/optimism-contracts,cerc/optimism-op-node,cerc/optimism-l2geth,cerc/optimism-op-batcher
+```
+
+This should create the required docker images in the local image registry:
+* `cerc/go-ethereum`
+* `cerc/lighthouse`
+* `cerc/fixturenet-eth-geth`
+* `cerc/fixturenet-eth-lighthouse`
+* `cerc/foundry`
+* `cerc/optimism-contracts`
+* `cerc/optimism-l2geth`
+* `cerc/optimism-op-batcher`
+* `cerc/optimism-op-node`
+
+## Deploy
+
+(Optional) Update the [l1-params.env](../../config/fixturenet-optimism/l1-params.env) file with L1 endpoint (`L1_RPC`, `L1_HOST` and `L1_PORT`) and other params if running L1 separately
+
+* NOTE:
+  * Stack Orchestrator needs to be run in [`dev`](/docs/CONTRIBUTING.md#install-developer-mode) mode to be able to edit the env file
+  * If L1 is running on the host machine, use `host.docker.internal` as the hostname to access the host port
+
+Deploy the stack:
+
+```bash
+laconic-so --stack fixturenet-optimism deploy up
+
+# Only start fixturenet-optimism pod (L2) if running L1 separately
+laconic-so --stack fixturenet-optimism deploy up --include fixturenet-optimism
+```
+
+The `fixturenet-optimism-contracts` service may take a while (`~15 mins`) to complete running as it:
+1. waits for the 'Merge' to happen on L1
+2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
+3. deploys the L1 contracts
+
+To list down and monitor the running containers:
+
+```bash
+laconic-so --stack fixturenet-optimism deploy ps
+
+# With status
+docker ps
+
+# Check logs for a container
+docker logs -f <CONTAINER_ID>
+```
+
+## Clean up
+
+Stop all services running in the background:
+
+```bash
+laconic-so --stack fixturenet-optimism deploy down
+
+# If only ran fixturenet-optimism pod (L2)
+laconic-so --stack fixturenet-optimism deploy down --include fixturenet-optimism
+```
+
+Clear volumes created by this stack:
+
+```bash
+# List all relevant volumes
+docker volume ls -q --filter name=laconic*
+
+# Remove all the listed volumes
+docker volume rm $(docker volume ls -q --filter name=laconic*)
+```
+
+## Known Issues
+
+* Currently not supported:
+  * Stopping and restarting the stack from where it left off; currently starts fresh on a restart
+* Resource requirements (memory + time) for building `cerc/foundry` image are on the higher side
+  * `cerc/optimism-contracts` image is currently based on `cerc/foundry` (Optimism requires foundry installation)

app/data/stacks/fixturenet-optimism/stack.yml

@@ -0,0 +1,21 @@
+version: "1.0"
+name: fixturenet-optimism
+decription: "Optimism Fixturenet"
+repos:
+  - cerc-io/go-ethereum
+  - dboreham/foundry
+  - ethereum-optimism/optimism
+  - ethereum-optimism/op-geth
+containers:
+  - cerc/go-ethereum
+  - cerc/lighthouse
+  - cerc/fixturenet-eth-geth
+  - cerc/fixturenet-eth-lighthouse
+  - cerc/foundry
+  - cerc/optimism-contracts
+  - cerc/optimism-op-node
+  - cerc/optimism-l2geth
+  - cerc/optimism-op-batcher
+pods:
+  - fixturenet-eth
+  - fixturenet-optimism

app/data/stacks/mobymask-v2/README.md

@@ -18,23 +18,23 @@ Checkout to the required versions and branches in repos
 ```bash
 # watcher-ts
 cd ~/cerc/watcher-ts
-git checkout v0.2.31
+git checkout v0.2.34
 
 # react-peer
 cd ~/cerc/react-peer
-git checkout v0.2.29
+git checkout v0.2.31
 
 # mobymask-ui
 cd ~/cerc/mobymask-ui
 git checkout laconic
 
-# laconicd
-cd ~/cerc/laconicd
-git checkout v0.8.0
-
 # MobyMask
 cd ~/cerc/MobyMask
 git checkout v0.1.1
+
+# Optimism
+cd ~/cerc/optimism
+git checkout @eth-optimism/sdk@0.0.0-20230329025055
 ```
 
 Build the container images:
@@ -47,69 +47,33 @@ This should create the required docker images in the local image registry.
 
 Deploy the stack:
 
-* Deploy the laconic chain
+* Deploy the containers:
 
   ```bash
-  laconic-so --stack mobymask-v2 deploy-system --include mobymask-laconicd up
+  laconic-so --stack mobymask-v2 deploy-system up
   ```
 
-* Check that laconic chain status is healthy
+* List and check the health status of all the containers using `docker ps` and wait for them to be `healthy`
+
+  NOTE: The `mobymask-app` container might not start; if the app is not running at http://localhost:3002, restart the container using it's id:
 
   ```bash
-  docker ps
-  ```
+  docker ps -a | grep "mobymask-app"
 
-* Export the private key from laconicd
-
-  ```bash
-  laconic-so --stack mobymask-v2 deploy-system --include mobymask-laconicd exec laconicd "echo y | laconicd keys export mykey --unarmored-hex --unsafe"
-  ```
-
-* Set the private key in [secrets.json](../../config/watcher-mobymask-v2/secrets.json) file that will be used by mobymask container to deploy contract
-
-* Create a new account
-
-  ```bash
-  laconic-so --stack mobymask-v2 deploy-system --include mobymask-laconicd exec laconicd "laconicd keys add alice"
-  ```
-
-* Transfer balance to new account
-
-  ```bash
-  laconic-so --stack mobymask-v2 deploy-system --include mobymask-laconicd exec laconicd 'laconicd tx bank send $(laconicd keys show mykey -a) $(laconicd keys show alice -a) 1000000000000000000000000aphoton --fees 2000aphoton'
-  ```
-
-* Export the private key of new account from laconicd
-
-  ```bash
-  laconic-so --stack mobymask-v2 deploy-system --include mobymask-laconicd exec laconicd "echo y | laconicd keys export alice --unarmored-hex --unsafe"
-  ```
-
-* Set the private key (`PRIVATE_KEY`) in [peer-start.sh](../../config/watcher-mobymask-v2/peer-start.sh) file that will be used to start the peer that sends txs to L2 chain
-
-* Deploy the other containers
-
-  ```bash
-  laconic-so --stack mobymask-v2 deploy-system --include watcher-mobymask-v2 up
-  ```
-
-* Check that all containers are healthy using `docker ps`
-
-  NOTE: The `mobymask-ui` container might not start. If mobymask-app is not running at http://localhost:3002, run command again to start the container
-
-  ```bash
-  laconic-so --stack mobymask-v2 deploy-system --include watcher-mobymask-v2 up
+  docker restart <CONTAINER_ID>
   ```
 
 ## Tests
 
-Find the watcher container's id:
+Find the watcher container's id and export it for later use:
 
 ```bash
-laconic-so --stack mobymask-v2 deploy-system --include watcher-mobymask-v2 ps | grep "mobymask-watcher-server"
+laconic-so --stack mobymask-v2 deploy-system ps | grep "mobymask-watcher-server"
+
+export CONTAINER_ID=<CONTAINER_ID>
 ```
 
-Example output
+Example output:
 
 ```
 id: 5d3aae4b22039fcd1c9b18feeb91318ede1100581e75bb5ac54f9e436066b02c, name: laconic-bfb01caf98b1b8f7c8db4d33f11b905a-mobymask-watcher-server-1, ports: 0.0.0.0:3001->3001/tcp, 0.0.0.0:9001->9001/tcp, 0.0.0.0:9090->9090/tcp
@@ -117,12 +81,6 @@ id: 5d3aae4b22039fcd1c9b18feeb91318ede1100581e75bb5ac54f9e436066b02c, name: laco
 
 In above output the container ID is `5d3aae4b22039fcd1c9b18feeb91318ede1100581e75bb5ac54f9e436066b02c`
 
-Export it for later use:
-
-```bash
-export CONTAINER_ID=<CONTAINER_ID>
-```
-
 Run the peer tests:
 
 ```bash
@@ -131,7 +89,11 @@ docker exec -w /app/packages/peer $CONTAINER_ID yarn test
 
 ## Web Apps
 
-Check that the status for web-app containers are healthy by using `docker ps`
+Check that the web-app containers are healthy:
+
+```bash
+docker ps | grep -E 'mobymask-app|peer-test-app'
+```
 
 ### mobymask-app
 
@@ -158,22 +120,19 @@ Follow the [demo](./demo.md) to try out the MobyMask app with L2 chain
 Stop all the services running in background run:
 
 ```bash
-laconic-so --stack mobymask-v2 deploy-system --include watcher-mobymask-v2 down
-
-laconic-so --stack mobymask-v2 deploy-system --include mobymask-laconicd down
+laconic-so --stack mobymask-v2 deploy-system down
 ```
 
 Clear volumes:
 
-* List all volumes
+* List all relevant volumes:
 
   ```bash
-  docker volume ls
+  docker volume ls -q --filter name=laconic*
   ```
 
-* Remove volumes created by this stack
+* Remove all the listed volumes:
 
-  Example:
   ```bash
-  docker volume rm laconic-bfb01caf98b1b8f7c8db4d33f11b905a_moby_data_server
+  docker volume rm $(docker volume ls -q --filter name=laconic*)
   ```

app/data/stacks/mobymask-v2/demo.md

@@ -1,22 +1,22 @@
 # Demo
 
-* Get the root invite link URL for mobymask-app
+* Get the root invite link URL for mobymask-app:
 
-  ```
-  laconic-so --stack mobymask-v2 deploy-system --include watcher-mobymask-v2 logs mobymask
+  ```bash
+  laconic-so --stack mobymask-v2 deploy-system logs mobymask
   ```
 
-  The invite link is seen at the end of the logs
-  Example:
-  ```
+  The invite link is seen at the end of the logs. Example log:
+
+  ```bash
   laconic-bfb01caf98b1b8f7c8db4d33f11b905a-mobymask-1  | http://127.0.0.1:3002/#/members?invitation=%7B%22v%22%3A1%2C%22signedDelegations%22%3A%5B%7B%22signature%22%3A%220x7559bd412f02677d60820e38243acf61547f79339395a34f7d4e1630e645aeb30535fc219f79b6fbd3af0ce3bd05132ad46d2b274a9fbc4c36bc71edd09850891b%22%2C%22delegation%22%3A%7B%22delegate%22%3A%220xc0838c92B2b71756E0eAD5B3C1e1F186baeEAAac%22%2C%22authority%22%3A%220x0000000000000000000000000000000000000000000000000000000000000000%22%2C%22caveats%22%3A%5B%7B%22enforcer%22%3A%220x558024C7d593B840E1BfD83E9B287a5CDad4db15%22%2C%22terms%22%3A%220x0000000000000000000000000000000000000000000000000000000000000000%22%7D%5D%7D%7D%5D%2C%22key%22%3A%220x98da9805821f1802196443e578fd32af567bababa0a249c07c82df01ecaa7d8d%22%7D
   ```
 
-* Open the invite link in browser to use the mobymask-app.
+* Open the invite link in a browser to use the mobymask-app.
 
   NOTE: Before opening the invite link, clear the browser cache (local storage) for http://127.0.0.1:3002 to remove old invitations
 
-* In the debug panel, check if it is connected to the p2p network (It should be connected to atleast one other peer for pubsub to work).
+* In the debug panel, check if it is connected to the p2p network (it should be connected to at least one other peer for pubsub to work).
 
 * Create an invite link in the app by clicking on `Create new invite link` button.
 
@@ -31,24 +31,24 @@
 
 * In a terminal check logs from the watcher peer container.
 
-  * Get the container id
+  * Get the container id:
 
     ```bash
-    laconic-so --stack mobymask-v2 deploy-system --include watcher-mobymask-v2 ps | grep mobymask-watcher-peer
+    laconic-so --stack mobymask-v2 deploy-system ps | grep mobymask-watcher-server
     ```
 
-  * Check logs
+  * Check logs:
 
     ```bash
-    docker logs -f CONTAINER_ID
+    docker logs -f <CONTAINER_ID>
     ```
 
-* It should have received the message, sent transaction to L2 chain and received a transaction receipt with block details.
+* It should have received the message, sent transaction to L2 chain and received a transaction receipt for an `invoke` message with block details.
 
   Example log:
 
-  ```
-  2023-03-23T10:25:19.771Z vulcanize:peer-listener [10:25:19] Received a message on mobymask P2P network from peer: PeerId(12D3KooWAVNswtcrX12iDYukEoxdQwD34kJyRWcQTfZ4unGg2xjd)
+  ```bash
+  2023-03-23T10:25:19.771Z vulcanize:peer-listener [10:25:19] Received a message on mobymask P2P network from peer: 12D3KooWAVNswtcrX12iDYukEoxdQwD34kJyRWcQTfZ4unGg2xjd
   2023-03-23T10:25:24.143Z laconic:libp2p-utils Transaction receipt for invoke message {
     to: '0x558024C7d593B840E1BfD83E9B287a5CDad4db15',
     blockNumber: 1996,
@@ -60,7 +60,7 @@
   ```
 
 * Check the phisher in watcher GQL: http://localhost:3001/graphql
-  * Use the blockHash from transaction receipt details or query for latest block
+  * Use the blockHash from transaction receipt details or query for latest block:
 
     ```gql
     query {
@@ -71,10 +71,10 @@
     }
     ```
 
-  * Get the deployed contract address
+  * Get the deployed contract address:
 
     ```bash
-    laconic-so --stack mobymask-v2 deploy-system --include watcher-mobymask-v2 exec mobymask-app "cat src/config.json"
+    laconic-so --stack mobymask-v2 deploy-system exec mobymask-app "cat src/config.json"
     ```
 
     The value of `address` field is the deployed contract address
@@ -94,7 +94,7 @@
     }
     ```
 
-    It should return true for reported phisher names.
+    It should return `true` for reported phisher names.
 
   * Watcher internally is using L2 chain `eth_getStorageAt` method.
 
@@ -107,7 +107,7 @@
 
 * Revocation messages can be seen in the debug panel `MESSAGES` tab of other browsers.
 
-* Check the watcher peer logs. It should receive a message and log the transaction receipt for revoke message.
+* Check the watcher peer logs. It should receive a message and log the transaction receipt for a `revoke` message.
 
 * Try reporting a phisher from the revoked invitee's browser.
 
@@ -129,4 +129,4 @@
     }
     ```
 
-    It should return false as the invitation/delegation used for reporting phishers has been revoked.
+    It should return `false` as the invitation/delegation used for reporting phishers has been revoked.

app/data/stacks/mobymask-v2/stack.yml

@@ -1,17 +1,29 @@
 version: "1.0"
 name: mobymask-v2
 repos:
+  - cerc-io/go-ethereum
+  - dboreham/foundry
+  - ethereum-optimism/optimism
+  - ethereum-optimism/op-geth
   - cerc-io/watcher-ts
   - cerc-io/react-peer
   - cerc-io/mobymask-ui
-  - cerc-io/laconicd
   - cerc-io/MobyMask
 containers:
+  - cerc/go-ethereum
+  - cerc/lighthouse
+  - cerc/fixturenet-eth-geth
+  - cerc/fixturenet-eth-lighthouse
+  - cerc/foundry
+  - cerc/optimism-contracts
+  - cerc/optimism-l2geth
+  - cerc/optimism-op-batcher
+  - cerc/optimism-op-node
   - cerc/watcher-mobymask-v2
   - cerc/react-peer
   - cerc/mobymask-ui
-  - cerc/laconicd
   - cerc/mobymask
 pods:
-  - mobymask-laconicd
+  - fixturenet-eth
+  - fixturenet-optimism
   - watcher-mobymask-v2

app/data/version.txt

@@ -1,2 +1,2 @@
 # This file should be re-generated running: scripts/update-version-file.sh script
-v1.0.33-7e1137f
+v1.0.35-df23476