fix for latest laconicd

.gitea/workflows/fixturenet-eth-plugeth-arm-test.yml

@@ -0,0 +1,57 @@
+name: Fixturenet-Eth-Plugeth-Arm-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-arm-test'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'
+
+
+jobs:
+  test:
+    name: "Run an Ethereum plugeth fixturenet test"
+    runs-on: ubuntu-latest-arm
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth-plugeth/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/fixturenet-eth-plugeth-test.yml

@@ -0,0 +1,57 @@
+name: Fixturenet-Eth-Plugeth-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'
+
+
+jobs:
+  test:
+    name: "Run an Ethereum plugeth fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth-plugeth/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/fixturenet-eth-test.yml

@@ -0,0 +1,55 @@
+name: Fixturenet-Eth-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-test'
+
+
+jobs:
+  test:
+    name: "Run an Ethereum fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth/run-test.sh
+      - name: Notify Vulcanize Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.VULCANIZE_SLACK_CI_ALERTS }}
+      - name: Notify DeepStack Slack on CI failure
+        if: ${{ always() && github.ref_name == 'main' }}
+        uses: ravsamhq/notify-slack-action@v2
+        with:
+          status: ${{ job.status }}
+          notify_when: 'failure'
+        env:
+          SLACK_WEBHOOK_URL: ${{ secrets.DEEPSTACK_SLACK_CI_ALERTS }}

.gitea/workflows/triggers/fixturenet-eth-plugeth-arm-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-plugeth-arm-test CI job
+

.gitea/workflows/triggers/fixturenet-eth-plugeth-test

@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-eth-plugeth-test CI job
+trigger
+trigger

.gitea/workflows/triggers/fixturenet-eth-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+

.gitea/workflows/triggers/fixturenet-laconicd-test

@@ -7,4 +7,3 @@ Trigger
 Trigger
 Trigger
 Trigger
-Trigger

docs/cli.md

@@ -51,7 +51,7 @@ $ laconic-so build-npms --include <package-name>
 ```
 e.g.
 ```
-$ laconic-so build-npms --include registry-sdk
+$ laconic-so build-npms --include laconic-sdk
 ```
 Build the packages for a stack:
 ```

docs/gitea-with-laconicd-fixturenet.md

@@ -56,7 +56,7 @@ laconic-so --stack fixturenet-laconicd build-npms
 Navigate to the Gitea console and switch to the `cerc-io` user then find the `Packages` tab to confirm that these two npm packages have been published:
 
 - `@cerc-io/laconic-registry-cli`
-- `@cerc-io/registry-sdk`
+- `@cerc-io/laconic-sdk`
 
 ### Build and deploy fixturenet containers
 

docs/laconicd-with-console.md

@@ -1,8 +1,9 @@
 # Running a laconicd fixturenet with console
 
-The following tutorial explains the steps to run a laconicd fixturenet with CLI and web console that displays records in the registry. It is designed as an introduction to Stack Orchestrator and to showcase one component of the Laconic Stack. Prior to Stack Orchestrator, the following repositories had to be cloned and setup manually:
+The following tutorial explains the steps to run a laconicd fixturenet with CLI and web console that displays records in the registry. It is designed as an introduction to Stack Orchestrator and to showcase one component of the Laconic Stack. Prior to Stack Orchestrator, the following 4 repositories had to be cloned and setup manually:
 
 - https://git.vdb.to/cerc-io/laconicd
+- https://git.vdb.to/cerc-io/laconic-sdk
 - https://git.vdb.to/cerc-io/laconic-registry-cli
 - https://git.vdb.to/cerc-io/laconic-console
 
@@ -10,7 +11,7 @@ Now, with Stack Orchestrator, it is a few quick commands. Additionally, the `doc
 
 ## Setup laconic-so
 
-To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the user experience, this tutorial is focused on using a fresh Digital Ocean (DO) droplet with similar specs:
+To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the user experience, this tutorial is focused on using a fresh Digital Ocean (DO) droplet with similar specs: 
 16 GB Memory / 8 Intel vCPUs / 160 GB Disk.
 
 1. Login to the droplet as root (either by SSH key or password set in the DO console)
@@ -50,7 +51,7 @@ To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the
 1. Get the repositories
 
     ```
-    laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd
+    laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
     ```
 
 1. Build the containers:
@@ -75,8 +76,6 @@ To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the
 1. Create a deployment directory for the stack:
     ```
     laconic-so --stack fixturenet-laconic-loaded deploy init --output laconic-loaded.spec --map-ports-to-host any-same --config LACONIC_HOSTED_ENDPOINT=$BACKEND_ENDPOINT
-
-    # Update port mapping in the laconic-loaded.spec file to resolve port conflicts on host if any
     ```
     ```
     laconic-so --stack fixturenet-laconic-loaded deploy create --deployment-dir laconic-loaded-deployment --spec-file laconic-loaded.spec
@@ -96,15 +95,16 @@ To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the
     You'll see output from `laconicd` and the block height should be >1 to confirm it is running:
 
     ```
-    laconicd-1         | 6:12AM INF indexed block events height=16 module=txindex
-    laconicd-1         | 6:12AM INF Timed out dur=2993.893332 height=17 module=consensus round=0 step=RoundStepNewHeight
-    laconicd-1         | 6:12AM INF received proposal module=consensus proposal="Proposal{17/0 (E15D03C180CE607AE8340A1325A0C134DFB4E1ADD992E173C701EBD362523267:1:DF138772FEF0, -1) 6A6F3B0A42B3 @ 2024-07-25T06:12:31.952967053Z}" proposer=86970D950BC9C16F3991A52D9C6DC55BA478A7C6
-    laconicd-1         | 6:12AM INF received complete proposal block hash=E15D03C180CE607AE8340A1325A0C134DFB4E1ADD992E173C701EBD362523267 height=17 module=consensus
-    laconicd-1         | 6:12AM INF finalizing commit of block hash=E15D03C180CE607AE8340A1325A0C134DFB4E1ADD992E173C701EBD362523267 height=17 module=consensus num_txs=0 root=AF4941107DC718ED1425E77A3DC7F1154FB780B7A7DE20288DC43442203527E3
-    laconicd-1         | 6:12AM INF finalized block block_app_hash=26A665360BB1EE64E54F97F2A5AB7F621B33A86D9896574000C05DE63F43F788 height=17 module=state num_txs_res=0 num_val_updates=0
-    laconicd-1         | 6:12AM INF executed block app_hash=26A665360BB1EE64E54F97F2A5AB7F621B33A86D9896574000C05DE63F43F788 height=17 module=state
-    laconicd-1         | 6:12AM INF committed state block_app_hash=AF4941107DC718ED1425E77A3DC7F1154FB780B7A7DE20288DC43442203527E3 height=17 module=state
-    laconicd-1         | 6:12AM INF indexed block events height=17 module=txindex
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:29PM INF indexed block exents height=12 module=txindex server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF Timed out dur=4976.960115 height=13 module=consensus round=0 server=node step=1
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received proposal module=consensus proposal={"Type":32,"block_id":{"hash":"D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4","parts":{"hash":"22411A20B7F14CDA33244420FBDDAF24450C0628C7A06034FF22DAC3699DDCC8","total":1}},"height":13,"pol_round":-1,"round":0,"signature":"DEuqnaQmvyYbUwckttJmgKdpRu6eVm9i+9rQ1pIrV2PidkMNdWRZBLdmNghkIrUzGbW8Xd7UVJxtLRmwRASgBg==","timestamp":"2023-04-18T21:30:01.49450663Z"} server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF received complete proposal block hash=D26C088A711F912ADB97888C269F628DA33153795621967BE44DCB43C3D03CA4 height=13 module=consensus server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF finalizing commit of block hash={} height=13 module=consensus num_txs=0 root=1A8CA1AF139CCC80EC007C6321D8A63A46A793386EE2EDF9A5CA0AB2C90728B7 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF minted coins from module account amount=2059730459416582643photon from=mint module=x/bank
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF executed block height=13 module=state num_invalid_txs=0 num_valid_txs=0 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF commit synced commit=436F6D6D697449447B5B363520313037203630203232372039352038352032303820313334203231392032303520313433203130372031343920313431203139203139322038362031323720362031383520323533203137362031333820313735203135392031383620323334203135382031323120313431203230342037335D3A447D
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF committed state app_hash=416B3CE35F55D086DBCD8F6B958D13C0567F06B9FDB08AAF9FBAEA9E798DCC49 height=13 module=state num_txs=0 server=node
+    laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF indexed block exents height=13 module=txindex server=node
     ```
 
 4. Confirm operation of the registry CLI:
@@ -117,30 +117,30 @@ To avoid hiccups on Mac M1/M2 and any local machine nuances that may affect the
    {
      "version": "0.3.0",
      "node": {
-       "id": "6e072894aa1f5d9535a1127a0d7a7f8e65100a2c",
+       "id": "4216af2ac9f68bda33a38803fc1b5c9559312c1d",
        "network": "laconic_9000-1",
        "moniker": "localtestnet"
      },
      "sync": {
-       "latestBlockHash": "260102C283D0411CFBA0270F7DC182650FFCA737A2F6F652A985F6065696F590",
-       "latestBlockHeight": "49",
-       "latestBlockTime": "2024-07-25 06:14:05.626744215 +0000 UTC",
-       "catchingUp": false
+       "latest_block_hash": "1BDF4CB9AE2390DA65BCF997C83133C18014FCDDCAE03708488F0B56FCEEA429",
+       "latest_block_height": "5",
+       "latest_block_time": "2023-08-09 16:00:30.386903172 +0000 UTC",
+       "catching_up": false
      },
      "validator": {
-       "address": "86970D950BC9C16F3991A52D9C6DC55BA478A7C6",
-       "votingPower": "1000000000000000"
+       "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+       "voting_power": "1000000000000000"
      },
      "validators": [
        {
-         "address": "86970D950BC9C16F3991A52D9C6DC55BA478A7C6",
-         "votingPower": "1000000000000000",
-         "proposerPriority": "0"
+         "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+         "voting_power": "1000000000000000",
+         "proposer_priority": "0"
        }
      ],
-     "numPeers": "0",
+     "num_peers": "0",
      "peers": [],
-     "diskUsage": "688K"
+     "disk_usage": "292.0K"
    }
    ```
 
@@ -186,13 +186,13 @@ wns
 1. The following command will create a bond and publish a record:
 
 ```
-laconic-so deployment --dir laconic-loaded-deployment exec cli ./scripts/create-demo-records.sh
+laconic-so --stack fixturenet-laconic-loaded deploy exec cli ./scripts/create-demo-records.sh
 ```
 
 You'll get an output like:
 
 ```
-Balance is: 9.9999e+25
+Balance is: 99998999999999998999600000
 Created bond with id: dd88e8d6f9567b32b28e70552aea4419c5dd3307ebae85a284d1fe38904e301a
 Published demo-record-1.yml with id: bafyreierh3xnfivexlscdwubvczmddsnf46uytyfvrbdhkjzztvsz6ruly
 ```
@@ -223,5 +223,5 @@ record:
 - e.g,:
 
 ```
-laconic-so deployment --dir laconic-loaded-deployment exec cli "laconic registry record list"
+laconic-so --stack fixturenet-laconic-loaded deploy exec cli "laconic registry record list"
 ```

stack_orchestrator/constants.py

@@ -34,6 +34,5 @@ volumes_key = "volumes"
 security_key = "security"
 annotations_key = "annotations"
 labels_key = "labels"
-replicas_key = "replicas"
 kind_config_filename = "kind-config.yml"
 kube_config_filename = "kubeconfig.yml"

stack_orchestrator/data/compose/docker-compose-fixturenet-laconicd.yml

@@ -2,11 +2,10 @@ services:
   laconicd:
     restart: unless-stopped
     image: cerc/laconicd:local
-    command: ["bash", "/docker-entrypoint-scripts.d/create-fixturenet.sh"]
+    command: ["sh", "/docker-entrypoint-scripts.d/create-fixturenet.sh"]
     environment:
-      TEST_AUCTION_ENABLED: ${TEST_AUCTION_ENABLED:-false}
-      TEST_REGISTRY_EXPIRY: ${TEST_REGISTRY_EXPIRY:-false}
-      ONBOARDING_ENABLED: ${ONBOARDING_ENABLED:-false}
+      TEST_AUCTION_ENABLED: ${TEST_AUCTION_ENABLED}
+      TEST_REGISTRY_EXPIRY: ${TEST_REGISTRY_EXPIRY}
     volumes:
       # The cosmos-sdk node's database directory:
       - laconicd-data:/root/.laconicd
@@ -20,9 +19,11 @@ services:
       - "26657"
       - "26656"
       - "9473"
+      - "8545"
+      - "8546"
       - "9090"
+      - "9091"
       - "1317"
-
   cli:
     image: cerc/laconic-registry-cli:local
     volumes:

stack_orchestrator/data/config/fixturenet-laconicd/create-fixturenet.sh

@@ -8,20 +8,19 @@ KEY="mykey"
 CHAINID="laconic_9000-1"
 MONIKER="localtestnet"
 KEYRING="test"
-KEYALGO="secp256k1"
-LOGLEVEL="${LOGLEVEL:-info}"
-DENOM="alnt"
-
+KEYALGO="eth_secp256k1"
+LOGLEVEL="info"
+# trace evm
+TRACE="--trace"
+# TRACE=""
 
 if [ "$1" == "clean" ] || [ ! -d "$HOME/.laconicd/data/blockstore.db" ]; then
   # validate dependencies are installed
-  command -v jq > /dev/null 2>&1 || {
-    echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"
-    exit 1
-  }
+  command -v jq > /dev/null 2>&1 || { echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"; exit 1; }
 
   # remove existing daemon and client
   rm -rf $HOME/.laconicd/*
+  rm -rf $HOME/.laconic/*
 
   if [ -n "`which make`" ]; then
     make install
@@ -34,42 +33,43 @@ if [ "$1" == "clean" ] || [ ! -d "$HOME/.laconicd/data/blockstore.db" ]; then
   laconicd keys add $KEY --keyring-backend $KEYRING --algo $KEYALGO
 
   # Set moniker and chain-id for Ethermint (Moniker can be anything, chain-id must be an integer)
-  laconicd init $MONIKER --chain-id $CHAINID --default-denom $DENOM
+  laconicd init $MONIKER --chain-id $CHAINID
 
-  update_genesis() {
-    jq "$1" $HOME/.laconicd/config/genesis.json > $HOME/.laconicd/config/tmp_genesis.json &&
-      mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  }
+  # Change parameter token denominations to photon
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["staking"]["params"]["bond_denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["crisis"]["constant_fee"]["denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["gov"]["deposit_params"]["min_deposit"][0]["denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["mint"]["params"]["mint_denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  # Custom modules
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent"]["denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent"]["denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commit_fee"]["denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveal_fee"]["denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_minimum_bid"]["denom"]="photon"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
 
   if [[ "$TEST_REGISTRY_EXPIRY" == "true" ]]; then
     echo "Setting timers for expiry tests."
 
-    update_genesis '.app_state["registry"]["params"]["record_rent_duration"]="60s"'
-    update_genesis '.app_state["registry"]["params"]["authority_grace_period"]="60s"'
-    update_genesis '.app_state["registry"]["params"]["authority_rent_duration"]="60s"'
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
   fi
 
   if [[ "$TEST_AUCTION_ENABLED" == "true" ]]; then
     echo "Enabling auction and setting timers."
 
-    update_genesis '.app_state["registry"]["params"]["authority_auction_enabled"]=true'
-    update_genesis '.app_state["registry"]["params"]["authority_rent_duration"]="60s"'
-    update_genesis '.app_state["registry"]["params"]["authority_grace_period"]="300s"'
-    update_genesis '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"'
-    update_genesis '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"'
-  fi
-
-  if [[ "$ONBOARDING_ENABLED" == "true" ]]; then
-    echo "Enabling validator onboarding."
-
-    update_genesis '.app_state["onboarding"]["params"]["onboarding_enabled"]=true'
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_enabled"]=true' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="300s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+    cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
   fi
 
   # increase block time (?)
-  update_genesis '.consensus["params"]["block"]["time_iota_ms"]="1000"'
+  cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["time_iota_ms"]="1000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
 
   # Set gas limit in genesis
-  update_genesis '.consensus["params"]["block"]["max_gas"]="10000000"'
+  cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["max_gas"]="10000000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
 
   # disable produce empty block
   if [[ "$OSTYPE" == "darwin"* ]]; then
@@ -78,6 +78,30 @@ if [ "$1" == "clean" ] || [ ! -d "$HOME/.laconicd/data/blockstore.db" ]; then
       sed -i 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
   fi
 
+  if [[ $1 == "pending" ]]; then
+    if [[ "$OSTYPE" == "darwin"* ]]; then
+        sed -i '' 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+        sed -i '' 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+    else
+        sed -i 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+        sed -i 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+    fi
+  fi
+
   # Enable telemetry (prometheus metrics: http://localhost:1317/metrics?format=prometheus)
   if [[ "$OSTYPE" == "darwin"* ]]; then
     sed -i '' 's/enabled = false/enabled = true/g' $HOME/.laconicd/config/app.toml
@@ -90,27 +114,23 @@ if [ "$1" == "clean" ] || [ ! -d "$HOME/.laconicd/data/blockstore.db" ]; then
   fi
 
   # Allocate genesis accounts (cosmos formatted addresses)
-  # 10^30 alnt | 10^12 lnt
-  laconicd genesis add-genesis-account $KEY 1000000000000000000000000000000$DENOM --keyring-backend $KEYRING
+  laconicd add-genesis-account $KEY 100000000000000000000000000photon --keyring-backend $KEYRING
 
   # Sign genesis transaction
-  # 10^24 alnt | 10^6 lnt
-  laconicd genesis gentx $KEY 1000000000000000000000000$DENOM --keyring-backend $KEYRING --chain-id $CHAINID
+  laconicd gentx $KEY 1000000000000000000000photon --keyring-backend $KEYRING --chain-id $CHAINID
 
   # Collect genesis tx
-  laconicd genesis collect-gentxs
+  laconicd collect-gentxs
 
   # Run this to ensure everything worked and that the genesis file is setup correctly
-  laconicd genesis validate
+  laconicd validate-genesis
+
+  if [[ $1 == "pending" ]]; then
+    echo "pending mode is on, please wait for the first block committed."
+  fi
 else
   echo "Using existing database at $HOME/.laconicd.  To replace, run '`basename $0` clean'"
 fi
 
 # Start the node (remove the --pruning=nothing flag if historical queries are not needed)
-laconicd start \
-  --pruning=nothing \
-  --log_level $LOGLEVEL \
-  --minimum-gas-prices=1$DENOM \
-  --api.enable \
-  --rpc.laddr="tcp://0.0.0.0:26657" \
-  --gql-server --gql-playground
+laconicd start --pruning=nothing --evm.tracer=json $TRACE --log_level $LOGLEVEL --minimum-gas-prices=0.0001photon --json-rpc.api eth,txpool,personal,net,debug,web3,miner --api.enable --gql-server --gql-playground

stack_orchestrator/data/config/fixturenet-laconicd/registry-cli-config-template.yml

@@ -6,4 +6,4 @@ services:
     bondId:
     chainId: laconic_9000-1
     gas: 350000
-    fees: 2000000alnt
+    fees: 200000photon

stack_orchestrator/data/config/mainnet-laconicd/registry-cli-config-template.yml

@@ -6,4 +6,4 @@ services:
     bondId:
     chainId: laconic_9000-1
     gas: 250000
-    fees: 2000000alnt
+    fees: 200000photon

stack_orchestrator/data/config/mainnet-laconicd/scripts/run-laconicd.sh

@@ -1,15 +1,18 @@
 #!/bin/sh
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+if [[ -n "$CERC_SCRIPT_DEBUG" ]]; then
     set -x
 fi
 
 #TODO: pass these in from the caller
+TRACE="--trace"
 LOGLEVEL="info"
 
 laconicd start \
     --pruning=nothing \
+    --evm.tracer=json $TRACE \
     --log_level $LOGLEVEL \
-    --minimum-gas-prices=1alnt \
+    --minimum-gas-prices=0.0001photon \
+    --json-rpc.api eth,txpool,personal,net,debug,web3,miner \
     --api.enable \
     --gql-server \
     --gql-playground

stack_orchestrator/data/container-build/cerc-builder-js/Dockerfile

@@ -68,5 +68,5 @@ ENV PATH="${PATH}:/scripts"
 COPY entrypoint.sh .
 ENTRYPOINT ["./entrypoint.sh"]
 # Placeholder CMD : generally this will be overridden at run time like :
-# docker run -it -v /home/builder/cerc/registry-sdk:/workspace cerc/builder-js sh -c 'cd /workspace && yarn && yarn build'
+# docker run -it -v /home/builder/cerc/laconic-sdk:/workspace cerc/builder-js sh -c 'cd /workspace && yarn && yarn build'
 CMD node --version

stack_orchestrator/data/container-build/cerc-laconic-registry-cli/Dockerfile

@@ -50,7 +50,7 @@ RUN npm config set @cerc-io:registry ${CERC_NPM_REGISTRY_URL} \
 # that install different Node-based CLI commands
 
 # Globally install the cli package
-RUN yarn global add @cerc-io/laconic-registry-cli
+RUN yarn global add @cerc-io/laconic-registry-cli@0.2.0
 
 # Add scripts
 RUN mkdir /scripts

stack_orchestrator/data/container-build/cerc-laconic-registry-cli/create-demo-records.sh

@@ -10,11 +10,11 @@ demo_records_dir="scripts/demo-records"
 
 # Check we have funds
 funds_response=$(${registry_command} account get --address $(cat my-address.txt))
-funds_balance=$(echo ${funds_response} | jq -r ".[0].balance[0].quantity")
+funds_balance=$(echo ${funds_response} | jq -r .[0].balance[0].quantity)
 echo "Balance is: ${funds_balance}"
 
 # Create a bond
-bond_create_result=$(${registry_command} bond create --type alnt --quantity 1000000000)
+bond_create_result=$(${registry_command} bond create --type photon --quantity 1000000000)
 bond_id=$(echo ${bond_create_result} | jq -r .bondId)
 echo "Created bond with id: ${bond_id}"
 

stack_orchestrator/data/container-build/cerc-nextjs-base/scripts/build-app.sh

@@ -5,11 +5,8 @@ if [ -n "$CERC_SCRIPT_DEBUG" ]; then
 fi
 
 CERC_MIN_NEXTVER=13.4.2
-CERC_DEFAULT_WEBPACK_VER="5.93.0"
 
 CERC_NEXT_VERSION="${CERC_NEXT_VERSION:-keep}"
-CERC_WEBPACK_VERSION="${CERC_WEBPACK_VERSION:-keep}"
-
 CERC_BUILD_TOOL="${CERC_BUILD_TOOL}"
 if [ -z "$CERC_BUILD_TOOL" ]; then
   if [ -f "pnpm-lock.yaml" ]; then
@@ -28,21 +25,13 @@ WORK_DIR="${1:-/app}"
 
 cd "${WORK_DIR}" || exit 1
 
-if [ -f "next.config.mjs" ]; then
-  NEXT_CONFIG_JS="next.config.mjs"
-  IMPORT_OR_REQUIRE="import"
-else
-  NEXT_CONFIG_JS="next.config.js"
-  IMPORT_OR_REQUIRE="require"
-fi
-
 # If this file doesn't exist at all, we'll get errors below.
-if [ ! -f "${NEXT_CONFIG_JS}" ]; then
-  touch ${NEXT_CONFIG_JS}
+if [ ! -f "next.config.js" ]; then
+  touch next.config.js
 fi
 
 if [ ! -f "next.config.dist" ]; then
-  cp $NEXT_CONFIG_JS next.config.dist
+  cp next.config.js next.config.dist
 fi
 
 which js-beautify >/dev/null
@@ -50,34 +39,17 @@ if [ $? -ne 0 ]; then
   npm i -g js-beautify
 fi
 
-# js-beautify formats NEXTJS_CONFIG_FILE (ie next.config.js / next.config.mjs) so we can reliably transformable later
-js-beautify next.config.dist > ${NEXT_CONFIG_JS}
-echo "" >> ${NEXT_CONFIG_JS}
+js-beautify next.config.dist > next.config.js
+echo "" >> next.config.js
 
-if [ "${IMPORT_OR_REQUIRE}" == "require" ]; then
-  WEBPACK_REQ_LINE=$(grep -n "require([\'\"]webpack[\'\"])" ${NEXT_CONFIG_JS} | cut -d':' -f1)
-  if [ -z "$WEBPACK_REQ_LINE" ]; then
-    cat > ${NEXT_CONFIG_JS}.0 <<EOF
+WEBPACK_REQ_LINE=$(grep -n "require([\'\"]webpack[\'\"])" next.config.js | cut -d':' -f1)
+if [ -z "$WEBPACK_REQ_LINE" ]; then
+  cat > next.config.js.0 <<EOF
     const webpack = require('webpack');
 EOF
-  fi
-else
-  WEBPACK_IMPORT_LINE=$(grep -n "^import .*[\'\"]webpack[\'\"];?$" ${NEXT_CONFIG_JS} | cut -d':' -f1)
-  if [ -z "$WEBPACK_IMPORT_LINE" ]; then
-    cat > ${NEXT_CONFIG_JS}.0 <<EOF
-    import webpack from 'webpack';
-EOF
-  fi
-  CREATE_REQUIRE_LINE=$(grep -n "require = createRequire" ${NEXT_CONFIG_JS} | cut -d':' -f1)
-  if [ -z "$CREATE_REQUIRE_LINE" ]; then
-    cat >> ${NEXT_CONFIG_JS}.0 <<EOF
-    import { createRequire } from "module";
-    const require = createRequire(import.meta.url);
-EOF
-  fi
 fi
 
-cat > ${NEXT_CONFIG_JS}.1 <<EOF
+cat > next.config.js.1 <<EOF
 let envMap;
 try {
   // .env-list.json provides us a list of identifiers which should be replaced at runtime.
@@ -85,8 +57,7 @@ try {
     a[v] = \`"CERC_RUNTIME_ENV_\${v.split(/\./).pop()}"\`;
     return a;
   }, {});
-} catch (e) {
-  console.error(e);
+} catch {
   // If .env-list.json cannot be loaded, we are probably running in dev mode, so use process.env instead.
   envMap = Object.keys(process.env).reduce((a, v) => {
     if (v.startsWith('CERC_')) {
@@ -95,80 +66,40 @@ try {
     return a;
   }, {});
 }
-console.log(envMap);
 EOF
 
-grep 'withPWA' ${NEXT_CONFIG_JS} >/dev/null && HAS_WITHPWA=true || HAS_WITHPWA=false
+CONFIG_LINES=$(wc -l next.config.js | awk '{ print $1 }')
+ENV_LINE=$(grep -n 'env:' next.config.js | cut -d':' -f1)
+WEBPACK_CONF_LINE=$(egrep -n 'webpack:\s+\([^,]+,' next.config.js | cut -d':' -f1)
+NEXT_SECTION_ADJUSTMENT=0
 
-if [ "$HAS_WITHPWA" == "true" ]; then
-  if [ "$IMPORT_OR_REQUIRE" == "import" ]; then
-    cat > ${NEXT_CONFIG_JS}.2 <<EOF
-const __xPWA__ = (p) => {
-  const realPWA = withPWA(p);
-  return (nextConfig) => {
-    const modConfig = {...nextConfig};
-
-    modConfig.webpack = (config) => {
+if [ -n "$WEBPACK_CONF_LINE" ]; then
+  WEBPACK_CONF_VAR=$(egrep -n 'webpack:\s+\([^,]+,' next.config.js | cut -d',' -f1 | cut -d'(' -f2)
+  head -$(( ${WEBPACK_CONF_LINE} )) next.config.js > next.config.js.2
+  cat > next.config.js.3 <<EOF
+      $WEBPACK_CONF_VAR.plugins.push(new webpack.DefinePlugin(envMap));
+EOF
+  NEXT_SECTION_LINE=$((WEBPACK_CONF_LINE))
+elif [ -n "$ENV_LINE" ]; then
+  head -$(( ${ENV_LINE} - 1 )) next.config.js > next.config.js.2
+  cat > next.config.js.3 <<EOF
+    webpack: (config) => {
       config.plugins.push(new webpack.DefinePlugin(envMap));
-      return nextConfig.webpack ? nextConfig.webpack(config) : config;
-    };
-
-    return realPWA(modConfig);
-  };
-};
+      return config;
+    },
 EOF
-  else
-    cat > ${NEXT_CONFIG_JS}.3 <<EOF
-const __xPWA__ = (nextConfig) => {
-  const modConfig = {...nextConfig};
-
-  modConfig.webpack = (config) => {
-    config.plugins.push(new webpack.DefinePlugin(envMap));
-    return nextConfig.webpack ? nextConfig.webpack(config) : config;
-  };
-
-  return withPWA(modConfig);
-};
-EOF
-  fi
-
-  cat ${NEXT_CONFIG_JS} | js-beautify | sed 's/withPWA(/__xPWA__(/g' > ${NEXT_CONFIG_JS}.4
+  NEXT_SECTION_ADJUSTMENT=1
+  NEXT_SECTION_LINE=$ENV_LINE
 else
-    cat > ${NEXT_CONFIG_JS}.3 <<EOF
-  const __xCfg__ = (nextConfig) => {
-    const modConfig = {...nextConfig};
-
-    modConfig.webpack = (config) => {
-      config.plugins.push(new webpack.DefinePlugin(envMap));
-      return nextConfig.webpack ? nextConfig.webpack(config) : config;
-    };
-
-    return modConfig;
-  };
-EOF
-  if [ "$IMPORT_OR_REQUIRE" == "import" ]; then
-    cat ${NEXT_CONFIG_JS} | js-beautify | sed 's/export\s\+default\s\+/const __orig_cfg__ = /g' > ${NEXT_CONFIG_JS}.4
-    echo "export default __xCfg__(__orig_cfg__);" > ${NEXT_CONFIG_JS}.5
-  else
-    cat ${NEXT_CONFIG_JS} | js-beautify | sed 's/module.exports\s\+=\s\+/const __orig_cfg__ = /g' > ${NEXT_CONFIG_JS}.4
-    echo "module.exports = __xCfg__(__orig_cfg__);" > ${NEXT_CONFIG_JS}.5
-  fi
+  echo "WARNING: Cannot find location to insert environment variable map in next.config.js" 1>&2
+  rm -f next.config.js.*
+  NEXT_SECTION_LINE=0
 fi
 
+tail -$(( ${CONFIG_LINES} - ${NEXT_SECTION_LINE} + ${NEXT_SECTION_ADJUSTMENT} )) next.config.js > next.config.js.5
 
-rm -f ${NEXT_CONFIG_JS}
-for ((i=0; i <= 10; i++)); do
-  if [ -s "${NEXT_CONFIG_JS}.${i}" ]; then
-    if [ $i -le 2 ] ; then
-      cat ${NEXT_CONFIG_JS}.${i} >> ${NEXT_CONFIG_JS}
-    else
-      cat ${NEXT_CONFIG_JS}.${i} | sed 's/^ *//g' | js-beautify | grep -v 'process\.\env\.' | js-beautify >> ${NEXT_CONFIG_JS}
-    fi
-  fi
-done
-rm ${NEXT_CONFIG_JS}.*
-cat ${NEXT_CONFIG_JS} | js-beautify > ${NEXT_CONFIG_JS}.pretty
-mv ${NEXT_CONFIG_JS}.pretty ${NEXT_CONFIG_JS}
+cat next.config.js.* | sed 's/^ *//g' | js-beautify | grep -v 'process\.\env\.' | js-beautify > next.config.js
+rm next.config.js.*
 
 "${SCRIPT_DIR}/find-env.sh" "$(pwd)" > .env-list.json
 
@@ -176,6 +107,8 @@ if [ ! -f "package.dist" ]; then
   cp package.json package.dist
 fi
 
+cat package.dist | jq '.scripts.cerc_compile = "next experimental-compile"' | jq '.scripts.cerc_generate = "next experimental-generate"' > package.json
+
 CUR_NEXT_VERSION="`jq -r '.dependencies.next' package.json`"
 
 if [ "$CERC_NEXT_VERSION" != "keep" ] && [ "$CUR_NEXT_VERSION" != "$CERC_NEXT_VERSION" ]; then
@@ -184,38 +117,10 @@ if [ "$CERC_NEXT_VERSION" != "keep" ] && [ "$CUR_NEXT_VERSION" != "$CERC_NEXT_VE
   mv package.json.$$ package.json
 fi
 
-CUR_WEBPACK_VERSION="`jq -r '.dependencies.webpack' package.json`"
-if [ -z "$CUR_WEBPACK_VERSION" ]; then
-  CUR_WEBPACK_VERSION="`jq -r '.devDependencies.webpack' package.json`"
-fi
-if [ "${CERC_WEBPACK_VERSION}" != "keep" ] || [ "${CUR_WEBPACK_VERSION}" == "null" ]; then
-  if [ -z "$CERC_WEBPACK_VERSION" ] || [ "$CERC_WEBPACK_VERSION" == "keep" ]; then
-    CERC_WEBPACK_VERSION="${CERC_DEFAULT_WEBPACK_VER}"
-  fi
-  echo "Webpack is required for env variable substitution.  Adding to webpack@$CERC_WEBPACK_VERSION to dependencies..." 1>&2
-  cat package.json | jq ".dependencies.webpack = \"$CERC_WEBPACK_VERSION\"" > package.json.$$
-  mv package.json.$$ package.json
-fi
-
 time $CERC_BUILD_TOOL install || exit 1
 
 CUR_NEXT_VERSION=`jq -r '.version' node_modules/next/package.json`
 
-# See https://github.com/vercel/next.js/discussions/46544
-semver -p -r ">=14.2.0" "$CUR_NEXT_VERSION"
-if [ $? -eq 0 ]; then
-  # For >= 14.2.0
-  CERC_NEXT_COMPILE_COMMAND="next build --experimental-build-mode compile"
-  CERC_NEXT_GENERATE_COMMAND="next build --experimental-build-mode generate"
-else
-  # For 13.4.2 to 14.1.x
-  CERC_NEXT_COMPILE_COMMAND="next experimental-compile"
-  CERC_NEXT_GENERATE_COMMAND="next experimental-generate"
-fi
-
-cat package.json | jq ".scripts.cerc_compile = \"$CERC_NEXT_COMPILE_COMMAND\"" | jq ".scripts.cerc_generate = \"$CERC_NEXT_GENERATE_COMMAND\"" > package.json.$$
-mv package.json.$$ package.json
-
 semver -p -r ">=$CERC_MIN_NEXTVER" $CUR_NEXT_VERSION
 if [ $? -ne 0 ]; then
   cat <<EOF

stack_orchestrator/data/container-build/cerc-nextjs-base/scripts/find-env.sh

@@ -20,11 +20,9 @@ for d in $(find . -maxdepth 1 -type d | grep -v '\./\.' | grep '/' | cut -d'/' -
   done
 done
 
-NEXT_CONF="next.config.mjs next.config.js next.config.dist"
+NEXT_CONF="next.config.js next.config.dist"
 for f in $NEXT_CONF; do
-    if [ -f "$f" ]; then
-        cat "$f" | tr -s '[:blank:]' '\n' | tr -s '[{},()]' '\n' | egrep -o 'process.env.[A-Za-z0-9_]+' >> $TMPF
-    fi
+    cat "$f" | tr -s '[:blank:]' '\n' | tr -s '[{},()]' '\n' | egrep -o 'process.env.[A-Za-z0-9_]+' >> $TMPF
 done
 
 cat $TMPF | sort -u | jq  --raw-input .  | jq --slurp .

stack_orchestrator/data/container-build/cerc-ping-pub/config/laconic-chaindata-template.json

@@ -7,16 +7,16 @@
     "rpc": [
         {"provider": "LX-tendermint-rpc", "address": "LACONIC_LACONICD_RPC_URL"}
     ],
-    "sdk_version": "0.50.3",
+    "sdk_version": "0.45.1",
     "coin_type": "118",
     "min_tx_fee": "800",
-    "addr_prefix": "laconic",
+    "addr_prefix": "ethm",
     "logo": "/logos/cosmos.svg",
     "assets": [{
-        "base": "alnt",
+        "base": "photon",
         "symbol": "LNT",
-        "exponent": "18",
-        "coingecko_id": "cosmos",
+        "exponent": "6",
+        "coingecko_id": "cosmos", 
         "logo": "/logos/cosmos.svg"
     }]
 }

stack_orchestrator/data/npm-package-list.txt

@@ -1,4 +1,4 @@
-registry-sdk
+laconic-sdk
 laconic-registry-cli
 laconic-console
 debug

stack_orchestrator/data/repository-list.txt

@@ -7,7 +7,7 @@ github.com/cerc-io/ipld-eth-db-validator
 github.com/cerc-io/ipld-eth-beacon-indexer
 github.com/cerc-io/ipld-eth-beacon-db
 github.com/cerc-io/laconicd
-github.com/cerc-io/registry-sdk
+github.com/cerc-io/laconic-sdk
 github.com/cerc-io/laconic-registry-cli
 github.com/cerc-io/laconic-console
 github.com/cerc-io/mobymask-watcher-ts

stack_orchestrator/data/stacks/build-support/README.md

@@ -58,5 +58,5 @@ Now npm packages can be built:
 Ensure that `CERC_NPM_AUTH_TOKEN` is set with the token printed above when the package-registry stack was deployed (the actual token value will be different than shown in this example):
 ```
 $ export CERC_NPM_AUTH_TOKEN=84fe66a73698bf11edbdccd0a338236b7d1d5c45
-$ laconic-so build-npms --include registry-sdk,laconic-registry-cli
+$ laconic-so build-npms --include laconic-sdk,laconic-registry-cli
 ```

stack_orchestrator/data/stacks/fixturenet-laconic-loaded/README.md

@@ -64,6 +64,5 @@ $ laconic-so --stack fixturenet-laconic-loaded deploy exec cli ./scripts/create-
 Balance is: 99998999999999998999600000
 Created bond with id: dd88e8d6f9567b32b28e70552aea4419c5dd3307ebae85a284d1fe38904e301a
 Published demo-record-1.yml with id: bafyreierh3xnfivexlscdwubvczmddsnf46uytyfvrbdhkjzztvsz6ruly
-...
 ```
-The published records should be visible in the console.
+The published record should be visible in the console.

stack_orchestrator/data/stacks/fixturenet-laconic-loaded/stack.yml

@@ -7,11 +7,11 @@ repos:
   - github.com/lirewine/crypto
   - github.com/lirewine/gem
   - github.com/lirewine/sdk
-  - git.vdb.to/cerc-io/registry-sdk
+  - git.vdb.to/cerc-io/laconic-sdk
   - git.vdb.to/cerc-io/laconic-registry-cli
   - git.vdb.to/cerc-io/laconic-console
 npms:
-  - registry-sdk
+  - laconic-sdk
   - laconic-registry-cli
   - debug
   - crypto
@@ -30,3 +30,4 @@ config:
   cli:
     key: laconicd.mykey
     address: laconicd.myaddress
+

stack_orchestrator/data/stacks/fixturenet-laconicd/stack.yml

@@ -3,10 +3,10 @@ name: fixturenet-laconicd
 description: "A laconicd fixturenet"
 repos:
   - git.vdb.to/cerc-io/laconicd
-  - git.vdb.to/cerc-io/registry-sdk
+  - git.vdb.to/cerc-io/laconic-sdk
   - git.vdb.to/cerc-io/laconic-registry-cli
 npms:
-  - registry-sdk
+  - laconic-sdk
   - laconic-registry-cli
 containers:
   - cerc/laconicd

stack_orchestrator/data/stacks/mainnet-laconic/deploy/commands.py

@@ -22,6 +22,7 @@ from stack_orchestrator.opts import opts
 from enum import Enum
 from pathlib import Path
 from shutil import copyfile, copytree
+import json
 import os
 import sys
 import tomli
@@ -33,9 +34,8 @@ default_spec_file_content = ""
 class SetupPhase(Enum):
     INITIALIZE = 1
     JOIN = 2
-    CONNECT = 3
-    CREATE = 4
-    ILLEGAL = 5
+    CREATE = 3
+    ILLEGAL = 3
 
 
 def _client_toml_path(network_dir: Path):
@@ -62,13 +62,29 @@ def _get_node_moniker_from_config(network_dir: Path):
     return moniker
 
 
+def _get_node_key_from_gentx(gentx_file_name: str):
+    gentx_file_path = Path(gentx_file_name)
+    if gentx_file_path.exists():
+        with open(Path(gentx_file_name), "rb") as f:
+            parsed_json = json.load(f)
+            return parsed_json['body']['messages'][0]['delegator_address']
+    else:
+        print(f"Error: gentx file: {gentx_file_name} does not exist")
+        sys.exit(1)
+
+
 def _comma_delimited_to_list(list_str: str):
     return list_str.split(",") if list_str else []
 
 
-def _get_node_keys_from_gentx_files(gentx_address_list: str):
-    gentx_addresses = _comma_delimited_to_list(gentx_address_list)
-    return gentx_addresses
+def _get_node_keys_from_gentx_files(gentx_file_list: str):
+    node_keys = []
+    gentx_files = _comma_delimited_to_list(gentx_file_list)
+    for gentx_file in gentx_files:
+        node_key = _get_node_key_from_gentx(gentx_file)
+        if node_key:
+            node_keys.append(node_key)
+    return node_keys
 
 
 def _copy_gentx_files(network_dir: Path, gentx_file_list: str):
@@ -131,35 +147,6 @@ def _enable_cors(config_dir: Path):
         output_file.write(app_file_content)
 
 
-def _set_listen_address(config_dir: Path):
-    config_file_path = config_dir.joinpath("config.toml")
-    if not config_file_path.exists():
-        print("Error: config.toml not found")
-        sys.exit(1)
-    with open(config_file_path, "r") as input_file:
-        config_file_content = input_file.read()
-        existing_pattern = r'^laddr = "tcp://127.0.0.1:26657"'
-        replace_with = 'laddr = "tcp://0.0.0.0:26657"'
-        print(f"Replacing in: {config_file_path}")
-        config_file_content = re.sub(existing_pattern, replace_with, config_file_content, flags=re.MULTILINE)
-    with open(config_file_path, "w") as output_file:
-        output_file.write(config_file_content)
-    app_file_path = config_dir.joinpath("app.toml")
-    if not app_file_path.exists():
-        print("Error: app.toml not found")
-        sys.exit(1)
-    with open(app_file_path, "r") as input_file:
-        app_file_content = input_file.read()
-        existing_pattern1 = r'^address = "tcp://localhost:1317"'
-        replace_with1 = 'address = "tcp://0.0.0.0:1317"'
-        app_file_content = re.sub(existing_pattern1, replace_with1, app_file_content, flags=re.MULTILINE)
-        existing_pattern2 = r'^address = "localhost:9090"'
-        replace_with2 = 'address = "0.0.0.0:9090"'
-        app_file_content = re.sub(existing_pattern2, replace_with2, app_file_content, flags=re.MULTILINE)
-    with open(app_file_path, "w") as output_file:
-        output_file.write(app_file_content)
-
-
 def _phase_from_params(parameters):
     phase = SetupPhase.ILLEGAL
     if parameters.initialize_network:
@@ -184,11 +171,6 @@ def _phase_from_params(parameters):
             print("Can't supply --initialize-network or --join-network with --create-network")
             sys.exit(1)
         phase = SetupPhase.CREATE
-    elif parameters.connect_network:
-        if parameters.initialize_network or parameters.join_network:
-            print("Can't supply --initialize-network or --join-network with --connect-network")
-            sys.exit(1)
-        phase = SetupPhase.CONNECT
     return phase
 
 
@@ -196,7 +178,7 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
 
     options = opts.o
 
-    currency = "alnt"  # Does this need to be a parameter?
+    currency = "stake"  # Does this need to be a parameter?
 
     if options.debug:
         print(f"parameters: {parameters}")
@@ -221,12 +203,11 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
         output, status = run_container_command(
             command_context,
             "laconicd", f"laconicd init {parameters.node_moniker} --home {laconicd_home_path_in_container}\
-                --chain-id {parameters.chain_id} --default-denom {currency}", mounts)
+                --chain-id {parameters.chain_id}", mounts)
         if options.debug:
             print(f"Command output: {output}")
 
     elif phase == SetupPhase.JOIN:
-        # In the join phase (alternative to connect) we are participating in a genesis ceremony for the chain
         if not os.path.exists(network_dir):
             print(f"Error: network directory {network_dir} doesn't exist")
             sys.exit(1)
@@ -241,7 +222,7 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
         output2, status2 = run_container_command(
             command_context,
             "laconicd",
-            f"laconicd genesis add-genesis-account {parameters.key_name} 12900000000000000000000{currency}\
+            f"laconicd add-genesis-account {parameters.key_name} 12900000000000000000000{currency}\
                 --home {laconicd_home_path_in_container} --keyring-backend test",
             mounts)
         if options.debug:
@@ -249,7 +230,7 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
         output3, status3 = run_container_command(
             command_context,
             "laconicd",
-            f"laconicd genesis gentx  {parameters.key_name} 90000000000{currency} --home {laconicd_home_path_in_container}\
+            f"laconicd gentx  {parameters.key_name} 90000000000{currency} --home {laconicd_home_path_in_container}\
                 --chain-id {chain_id} --keyring-backend test",
             mounts)
         if options.debug:
@@ -259,28 +240,7 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
             "laconicd",
             f"laconicd keys show  {parameters.key_name} -a --home {laconicd_home_path_in_container} --keyring-backend test",
             mounts)
-        print(f"Node account address: {output4}")
-
-    elif phase == SetupPhase.CONNECT:
-        # In the connect phase (named to not conflict with join) we are making a node that syncs a chain with existing genesis.json
-        # but not with validator role. We need this kind of node in order to bootstrap it into a validator after it syncs
-        output1, status1 = run_container_command(
-            command_context, "laconicd", f"laconicd keys add {parameters.key_name} --home {laconicd_home_path_in_container}\
-                --keyring-backend test", mounts)
-        if options.debug:
-            print(f"Command output: {output1}")
-        output2, status2 = run_container_command(
-            command_context,
-            "laconicd",
-            f"laconicd keys show  {parameters.key_name} -a --home {laconicd_home_path_in_container} --keyring-backend test",
-            mounts)
-        print(f"Node account address: {output2}")
-        output3, status3 = run_container_command(
-            command_context,
-            "laconicd",
-            f"laconicd cometbft show-validator --home {laconicd_home_path_in_container}",
-            mounts)
-        print(f"Node validator address: {output3}")
+        print(f"Node validator address: {output4}")
 
     elif phase == SetupPhase.CREATE:
         if not os.path.exists(network_dir):
@@ -299,13 +259,15 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
             copyfile(genesis_file_path, os.path.join(network_dir, "config", os.path.basename(genesis_file_path)))
         else:
             # We're generating the genesis file
+            if not parameters.gentx_file_list:
+                print("Error: --gentx-files must be supplied")
+                sys.exit(1)
             # First look in the supplied gentx files for the other nodes' keys
-            other_node_keys = _get_node_keys_from_gentx_files(parameters.gentx_address_list)
+            other_node_keys = _get_node_keys_from_gentx_files(parameters.gentx_file_list)
             # Add those keys to our genesis, with balances we determine here (why?)
             for other_node_key in other_node_keys:
                 outputk, statusk = run_container_command(
-                    command_context, "laconicd", f"laconicd genesis add-genesis-account {other_node_key} \
-                        12900000000000000000000{currency}\
+                    command_context, "laconicd", f"laconicd add-genesis-account {other_node_key} 12900000000000000000000{currency}\
                         --home {laconicd_home_path_in_container} --keyring-backend test", mounts)
             if options.debug:
                 print(f"Command output: {outputk}")
@@ -313,7 +275,7 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
             _copy_gentx_files(network_dir, parameters.gentx_file_list)
             # Now we can run collect-gentxs
             output1, status1 = run_container_command(
-                command_context, "laconicd", f"laconicd genesis collect-gentxs --home {laconicd_home_path_in_container}", mounts)
+                command_context, "laconicd", f"laconicd collect-gentxs --home {laconicd_home_path_in_container}", mounts)
             if options.debug:
                 print(f"Command output: {output1}")
             print(f"Generated genesis file, please copy to other nodes as required: \
@@ -322,7 +284,7 @@ def setup(command_context: DeployCommandContext, parameters: LaconicStackSetupCo
             _remove_persistent_peers(network_dir)
         # In both cases we validate the genesis file now
         output2, status1 = run_container_command(
-            command_context, "laconicd", f"laconicd genesis validate-genesis --home {laconicd_home_path_in_container}", mounts)
+            command_context, "laconicd", f"laconicd validate-genesis --home {laconicd_home_path_in_container}", mounts)
         print(f"validate-genesis result: {output2}")
 
     else:
@@ -357,7 +319,6 @@ def create(deployment_context: DeploymentContext, extra_args):
         _insert_persistent_peers(deployment_config_dir, initial_persistent_peers)
     # Enable CORS headers so explorers and so on can talk to the node
     _enable_cors(deployment_config_dir)
-    _set_listen_address(deployment_config_dir)
     # Copy the data directory contents into our deployment
     # TODO: change this to work with non local paths
     deployment_data_dir = deployment_context.deployment_dir.joinpath("data", "laconicd-data")
@@ -370,6 +331,7 @@ def init(command_context: DeployCommandContext):
 
 
 def get_state(command_context: DeployCommandContext):
+    print("Here we get state")
     return State.CONFIGURED
 
 

stack_orchestrator/data/stacks/mainnet-laconic/stack.yml

@@ -7,12 +7,12 @@ repos:
   - github.com/lirewine/crypto
   - github.com/lirewine/gem
   - github.com/lirewine/sdk
-  - git.vdb.to/cerc-io/registry-sdk
+  - git.vdb.to/cerc-io/laconic-sdk
   - git.vdb.to/cerc-io/laconic-registry-cli
   - git.vdb.to/cerc-io/laconic-console
   - github.com/ping-pub/explorer
 npms:
-  - registry-sdk
+  - laconic-sdk
   - laconic-registry-cli
   - debug
   - crypto

stack_orchestrator/data/stacks/mainnet-laconic/test/run-mainnet-laconic-test.sh

@@ -8,11 +8,8 @@ echo "Environment variables:"
 env
 # Test laconic stack
 echo "Running laconic stack test"
-if [ "$1" == "from-path" ]; then
-    TEST_TARGET_SO="laconic-so"
-else
-    TEST_TARGET_SO=$( ls -t1 ./package/laconic-so* | head -1 )
-fi
+# Bit of a hack, test the most recent package
+TEST_TARGET_SO=$( ls -t1 ./package/laconic-so* | head -1 )
 # Set a non-default repo dir
 export CERC_REPO_BASE_DIR=~/stack-orchestrator-test/repo-base-dir
 echo "Testing this package: $TEST_TARGET_SO"

stack_orchestrator/data/stacks/osmosis/README.md

@@ -109,7 +109,7 @@ Setup a test chain:
 ```bash
 export CERC_NPM_REGISTRY_URL=https://git.vdb.to/api/packages/cerc-io/npm/
 
-laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/registry-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
+laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
 
 laconic-so --stack fixturenet-laconic-loaded build-containers
 

stack_orchestrator/deploy/compose/deploy_docker.py

@@ -29,14 +29,14 @@ class DockerDeployer(Deployer):
                                    compose_env_file=compose_env_file)
         self.type = type
 
-    def up(self, detach, skip_cluster_management, services):
+    def up(self, detach, services):
         if not opts.o.dry_run:
             try:
                 return self.docker.compose.up(detach=detach, services=services)
             except DockerException as e:
                 raise DeployerException(e)
 
-    def down(self, timeout, volumes, skip_cluster_management):
+    def down(self, timeout, volumes):
         if not opts.o.dry_run:
             try:
                 return self.docker.compose.down(timeout=timeout, volumes=volumes)

stack_orchestrator/deploy/deploy.py

@@ -91,7 +91,7 @@ def create_deploy_context(
     return DeployCommandContext(stack, cluster_context, deployer)
 
 
-def up_operation(ctx, services_list, stay_attached=False, skip_cluster_management=False):
+def up_operation(ctx, services_list, stay_attached=False):
     global_context = ctx.parent.parent.obj
     deploy_context = ctx.obj
     cluster_context = deploy_context.cluster_context
@@ -102,18 +102,18 @@ def up_operation(ctx, services_list, stay_attached=False, skip_cluster_managemen
         print(f"Running compose up with container_exec_env: {container_exec_env}, extra_args: {services_list}")
     for pre_start_command in cluster_context.pre_start_commands:
         _run_command(global_context, cluster_context.cluster, pre_start_command)
-    deploy_context.deployer.up(detach=not stay_attached, skip_cluster_management=skip_cluster_management, services=services_list)
+    deploy_context.deployer.up(detach=not stay_attached, services=services_list)
     for post_start_command in cluster_context.post_start_commands:
         _run_command(global_context, cluster_context.cluster, post_start_command)
     _orchestrate_cluster_config(global_context, cluster_context.config, deploy_context.deployer, container_exec_env)
 
 
-def down_operation(ctx, delete_volumes, extra_args_list, skip_cluster_management=False):
+def down_operation(ctx, delete_volumes, extra_args_list):
     timeout_arg = None
     if extra_args_list:
         timeout_arg = extra_args_list[0]
     # Specify shutdown timeout (default 10s) to give services enough time to shutdown gracefully
-    ctx.obj.deployer.down(timeout=timeout_arg, volumes=delete_volumes, skip_cluster_management=skip_cluster_management)
+    ctx.obj.deployer.down(timeout=timeout_arg, volumes=delete_volumes)
 
 
 def status_operation(ctx):

stack_orchestrator/deploy/deploy_types.py

@@ -50,10 +50,8 @@ class LaconicStackSetupCommand:
     key_name: str
     initialize_network: bool
     join_network: bool
-    connect_network: bool
     create_network: bool
     gentx_file_list: str
-    gentx_address_list: str
     genesis_file: str
     network_dir: str
 

stack_orchestrator/deploy/deploy_util.py

@@ -13,6 +13,7 @@
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <http:#www.gnu.org/licenses/>.
 
+import os
 from typing import List, Any
 from stack_orchestrator.deploy.deploy_types import DeployCommandContext, VolumeMapping
 from stack_orchestrator.util import get_parsed_stack_config, get_yaml, get_pod_list, resolve_compose_file
@@ -82,9 +83,7 @@ def run_container_command(ctx: DeployCommandContext, service: str, command: str,
     docker_output = deployer.run(
         container_image,
         ["-c", command], entrypoint="sh",
-        # Current laconicd container has a bug where it crashes when run not as root
-        # Commented out line below is a workaround. Created files end up owned by root on the host
-        # user=f"{os.getuid()}:{os.getgid()}",
+        user=f"{os.getuid()}:{os.getgid()}",
         volumes=docker_volumes
         )
     # There doesn't seem to be a way to get an exit code from docker.run()

stack_orchestrator/deploy/deployer.py

@@ -20,11 +20,11 @@ from pathlib import Path
 class Deployer(ABC):
 
     @abstractmethod
-    def up(self, detach, skip_cluster_management, services):
+    def up(self, detach, services):
         pass
 
     @abstractmethod
-    def down(self, timeout, volumes, skip_cluster_management):
+    def down(self, timeout, volumes):
         pass
 
     @abstractmethod

stack_orchestrator/deploy/deployment.py

@@ -61,57 +61,47 @@ def make_deploy_context(ctx) -> DeployCommandContext:
                                  cluster_name, env_file, deployment_type)
 
 
-# TODO: remove legacy up command since it's an alias for start
 @command.command()
 @click.option("--stay-attached/--detatch-terminal", default=False, help="detatch or not to see container stdout")
-@click.option("--skip-cluster-management/--perform-cluster-management",
-              default=False, help="Skip cluster initialization/tear-down (only for kind-k8s deployments)")
 @click.argument('extra_args', nargs=-1)  # help: command: up <service1> <service2>
 @click.pass_context
-def up(ctx, stay_attached, skip_cluster_management, extra_args):
+def up(ctx, stay_attached, extra_args):
     ctx.obj = make_deploy_context(ctx)
     services_list = list(extra_args) or None
-    up_operation(ctx, services_list, stay_attached, skip_cluster_management)
+    up_operation(ctx, services_list, stay_attached)
 
 
 # start is the preferred alias for up
 @command.command()
 @click.option("--stay-attached/--detatch-terminal", default=False, help="detatch or not to see container stdout")
-@click.option("--skip-cluster-management/--perform-cluster-management",
-              default=False, help="Skip cluster initialization/tear-down (only for kind-k8s deployments)")
 @click.argument('extra_args', nargs=-1)  # help: command: up <service1> <service2>
 @click.pass_context
-def start(ctx, stay_attached, skip_cluster_management, extra_args):
+def start(ctx, stay_attached, extra_args):
     ctx.obj = make_deploy_context(ctx)
     services_list = list(extra_args) or None
-    up_operation(ctx, services_list, stay_attached, skip_cluster_management)
+    up_operation(ctx, services_list, stay_attached)
 
 
-# TODO: remove legacy up command since it's an alias for stop
 @command.command()
 @click.option("--delete-volumes/--preserve-volumes", default=False, help="delete data volumes")
-@click.option("--skip-cluster-management/--perform-cluster-management",
-              default=False, help="Skip cluster initialization/tear-down (only for kind-k8s deployments)")
 @click.argument('extra_args', nargs=-1)  # help: command: down <service1> <service2>
 @click.pass_context
-def down(ctx, delete_volumes, skip_cluster_management, extra_args):
+def down(ctx, delete_volumes, extra_args):
     # Get the stack config file name
     # TODO: add cluster name and env file here
     ctx.obj = make_deploy_context(ctx)
-    down_operation(ctx, delete_volumes, extra_args, skip_cluster_management)
+    down_operation(ctx, delete_volumes, extra_args)
 
 
 # stop is the preferred alias for down
 @command.command()
 @click.option("--delete-volumes/--preserve-volumes", default=False, help="delete data volumes")
-@click.option("--skip-cluster-management/--perform-cluster-management",
-              default=False, help="Skip cluster initialization/tear-down (only for kind-k8s deployments)")
 @click.argument('extra_args', nargs=-1)  # help: command: down <service1> <service2>
 @click.pass_context
-def stop(ctx, delete_volumes, skip_cluster_management, extra_args):
+def stop(ctx, delete_volumes, extra_args):
     # TODO: add cluster name and env file here
     ctx.obj = make_deploy_context(ctx)
-    down_operation(ctx, delete_volumes, extra_args, skip_cluster_management)
+    down_operation(ctx, delete_volumes, extra_args)
 
 
 @command.command()

stack_orchestrator/deploy/deployment_create.py

@@ -514,23 +514,6 @@ def create_operation(deployment_command_context, spec_file, deployment_dir, netw
             os.mkdir(destination_script_dir)
             script_paths = get_pod_script_paths(parsed_stack, pod)
             _copy_files_to_directory(script_paths, destination_script_dir)
-        if parsed_spec.is_kubernetes_deployment():
-            for configmap in parsed_spec.get_configmaps():
-                source_config_dir = resolve_config_dir(stack_name, configmap)
-                if os.path.exists(source_config_dir):
-                    destination_config_dir = deployment_dir_path.joinpath("configmaps", configmap)
-                    copytree(source_config_dir, destination_config_dir, dirs_exist_ok=True)
-        else:
-            # TODO: We should probably only do this if the volume is marked :ro.
-            for volume_name, volume_path in parsed_spec.get_volumes().items():
-                source_config_dir = resolve_config_dir(stack_name, volume_name)
-                # Only copy if the source exists and is _not_ empty.
-                if os.path.exists(source_config_dir) and os.listdir(source_config_dir):
-                    destination_config_dir = deployment_dir_path.joinpath(volume_path)
-                    # Only copy if the destination exists and _is_ empty.
-                    if os.path.exists(destination_config_dir) and not os.listdir(destination_config_dir):
-                        copytree(source_config_dir, destination_config_dir, dirs_exist_ok=True)
-
     # Delegate to the stack's Python code
     # The deploy create command doesn't require a --stack argument so we need to insert the
     # stack member here.
@@ -552,17 +535,15 @@ def create_operation(deployment_command_context, spec_file, deployment_dir, netw
 @click.option("--chain-id", help="The new chain id")
 @click.option("--key-name", help="Name for new node key")
 @click.option("--gentx-files", help="List of comma-delimited gentx filenames from other nodes")
-@click.option("--gentx-addresses", type=str, help="List of comma-delimited validator addresses for other nodes")
 @click.option("--genesis-file", help="Genesis file for the network")
 @click.option("--initialize-network", is_flag=True, default=False, help="Initialize phase")
 @click.option("--join-network", is_flag=True, default=False, help="Join phase")
-@click.option("--connect-network", is_flag=True, default=False, help="Connect phase")
 @click.option("--create-network", is_flag=True, default=False, help="Create phase")
 @click.option("--network-dir", help="Directory for network files")
 @click.argument('extra_args', nargs=-1)
 @click.pass_context
-def setup(ctx, node_moniker, chain_id, key_name, gentx_files, gentx_addresses, genesis_file, initialize_network, join_network,
-          connect_network, create_network, network_dir, extra_args):
-    parmeters = LaconicStackSetupCommand(chain_id, node_moniker, key_name, initialize_network, join_network, connect_network,
-                                         create_network, gentx_files, gentx_addresses, genesis_file, network_dir)
+def setup(ctx, node_moniker, chain_id, key_name, gentx_files, genesis_file, initialize_network, join_network, create_network,
+          network_dir, extra_args):
+    parmeters = LaconicStackSetupCommand(chain_id, node_moniker, key_name, initialize_network, join_network, create_network,
+                                         gentx_files, genesis_file, network_dir)
     call_stack_deploy_setup(ctx.obj, parmeters, extra_args)

stack_orchestrator/deploy/k8s/cluster_info.py

@@ -78,40 +78,28 @@ class ClusterInfo:
         if (opts.o.debug):
             print(f"Env vars: {self.environment_variables.map}")
 
-    def get_nodeports(self):
-        nodeports = []
+    def get_nodeport(self):
         for pod_name in self.parsed_pod_yaml_map:
             pod = self.parsed_pod_yaml_map[pod_name]
             services = pod["services"]
             for service_name in services:
                 service_info = services[service_name]
                 if "ports" in service_info:
-                    for raw_port in service_info["ports"]:
-                        if opts.o.debug:
-                            print(f"service port: {raw_port}")
-                        if ":" in raw_port:
-                            parts = raw_port.split(":")
-                            if len(parts) != 2:
-                                raise Exception(f"Invalid port definition: {raw_port}")
-                            node_port = int(parts[0])
-                            pod_port = int(parts[1])
-                        else:
-                            node_port = None
-                            pod_port = int(raw_port)
-                        service = client.V1Service(
-                            metadata=client.V1ObjectMeta(name=f"{self.app_name}-nodeport-{pod_port}"),
-                            spec=client.V1ServiceSpec(
-                                type="NodePort",
-                                ports=[client.V1ServicePort(
-                                    port=pod_port,
-                                    target_port=pod_port,
-                                    node_port=node_port
-                                )],
-                                selector={"app": self.app_name}
-                            )
-                        )
-                        nodeports.append(service)
-        return nodeports
+                    port = int(service_info["ports"][0])
+                    if opts.o.debug:
+                        print(f"service port: {port}")
+        service = client.V1Service(
+            metadata=client.V1ObjectMeta(name=f"{self.app_name}-nodeport"),
+            spec=client.V1ServiceSpec(
+                type="NodePort",
+                ports=[client.V1ServicePort(
+                    port=port,
+                    target_port=port
+                )],
+                selector={"app": self.app_name}
+            )
+        )
+        return service
 
     def get_ingress(self, use_tls=False, certificate=None, cluster_issuer="letsencrypt-prod"):
         # No ingress for a deployment that has no http-proxy defined, for now
@@ -385,12 +373,9 @@ class ClusterInfo:
             spec=client.V1PodSpec(containers=containers, image_pull_secrets=image_pull_secrets, volumes=volumes),
         )
         spec = client.V1DeploymentSpec(
-            replicas=self.spec.get_replicas(),
-            template=template, selector={
+            replicas=1, template=template, selector={
                 "matchLabels":
-                {"app": self.app_name}
-            }
-        )
+                {"app": self.app_name}})
 
         deployment = client.V1Deployment(
             api_version="apps/v1",

stack_orchestrator/deploy/k8s/deploy_k8s.py

@@ -16,7 +16,6 @@ from datetime import datetime, timezone
 
 from pathlib import Path
 from kubernetes import client, config
-from typing import List
 
 from stack_orchestrator import constants
 from stack_orchestrator.deploy.deployer import Deployer, DeployerConfigGenerator
@@ -52,14 +51,12 @@ class K8sDeployer(Deployer):
     networking_api: client.NetworkingV1Api
     k8s_namespace: str = "default"
     kind_cluster_name: str
-    skip_cluster_management: bool
     cluster_info: ClusterInfo
     deployment_dir: Path
     deployment_context: DeploymentContext
 
     def __init__(self, type, deployment_context: DeploymentContext, compose_files, compose_project_name, compose_env_file) -> None:
         self.type = type
-        self.skip_cluster_management = False
         # TODO: workaround pending refactoring above to cope with being created with a null deployment_context
         if deployment_context is None:
             return
@@ -185,7 +182,6 @@ class K8sDeployer(Deployer):
         if len(host_parts) == 2:
             host_as_wild = f"*.{host_parts[1]}"
 
-        # TODO: resolve method deprecation below
         now = datetime.utcnow().replace(tzinfo=timezone.utc)
         fmt = "%Y-%m-%dT%H:%M:%S%z"
 
@@ -206,16 +202,15 @@ class K8sDeployer(Deployer):
                                 return cert
         return None
 
-    def up(self, detach, skip_cluster_management, services):
-        self.skip_cluster_management = skip_cluster_management
+    def up(self, detach, services):
         if not opts.o.dry_run:
-            if self.is_kind() and not self.skip_cluster_management:
+            if self.is_kind():
                 # Create the kind cluster
                 create_cluster(self.kind_cluster_name, self.deployment_dir.joinpath(constants.kind_config_filename))
                 # Ensure the referenced containers are copied into kind
                 load_images_into_kind(self.kind_cluster_name, self.cluster_info.image_set)
             self.connect_api()
-            if self.is_kind() and not self.skip_cluster_management:
+            if self.is_kind():
                 # Now configure an ingress controller (not installed by default in kind)
                 install_ingress_for_kind()
                 # Wait for ingress to start (deployment provisioning will fail unless this is done)
@@ -251,8 +246,8 @@ class K8sDeployer(Deployer):
             if opts.o.debug:
                 print("No ingress configured")
 
-        nodeports: List[client.V1Service] = self.cluster_info.get_nodeports()
-        for nodeport in nodeports:
+        nodeport: client.V1Service = self.cluster_info.get_nodeport()
+        if nodeport:
             if opts.o.debug:
                 print(f"Sending this nodeport: {nodeport}")
             if not opts.o.dry_run:
@@ -264,8 +259,7 @@ class K8sDeployer(Deployer):
                     print("NodePort created:")
                     print(f"{nodeport_resp}")
 
-    def down(self, timeout, volumes, skip_cluster_management):  # noqa: C901
-        self.skip_cluster_management = skip_cluster_management
+    def down(self, timeout, volumes):  # noqa: C901
         self.connect_api()
         # Delete the k8s objects
 
@@ -348,10 +342,10 @@ class K8sDeployer(Deployer):
             if opts.o.debug:
                 print("No ingress to delete")
 
-        nodeports: List[client.V1Service] = self.cluster_info.get_nodeports()
-        for nodeport in nodeports:
+        nodeport: client.V1Service = self.cluster_info.get_nodeport()
+        if nodeport:
             if opts.o.debug:
-                print(f"Deleting this nodeport: {nodeport}")
+                print(f"Deleting this nodeport: {ingress}")
             try:
                 self.core_api.delete_namespaced_service(
                     namespace=self.k8s_namespace,
@@ -363,7 +357,7 @@ class K8sDeployer(Deployer):
             if opts.o.debug:
                 print("No nodeport to delete")
 
-        if self.is_kind() and not self.skip_cluster_management:
+        if self.is_kind():
             # Destroy the kind cluster
             destroy_cluster(self.kind_cluster_name)
 

stack_orchestrator/deploy/spec.py

@@ -117,9 +117,6 @@ class Spec:
     def get_annotations(self):
         return self.obj.get(constants.annotations_key, {})
 
-    def get_replicas(self):
-        return self.obj.get(constants.replicas_key, 1)
-
     def get_labels(self):
         return self.obj.get(constants.labels_key, {})
 

tests/fixturenet-eth-plugeth/run-test.sh

@@ -0,0 +1,44 @@
+#!/usr/bin/env bash
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+set -e
+echo "Running stack-orchestrator Ethereum plugeth fixturenet test"
+# Bit of a hack, test the most recent package
+TEST_TARGET_SO=$( ls -t1 ./package/laconic-so* | head -1 )
+CERC_STACK_NAME=fixturenet-plugeth-tx
+# Set a new unique repo dir
+export CERC_REPO_BASE_DIR=$(mktemp -d stack-orchestrator-fixturenet-eth-test.XXXXXXXXXX)
+echo "Testing this package: $TEST_TARGET_SO"
+echo "Test version command"
+reported_version_string=$( $TEST_TARGET_SO version )
+echo "Version reported is: ${reported_version_string}"
+echo "Cloning repositories into: $CERC_REPO_BASE_DIR"
+$TEST_TARGET_SO --stack $CERC_STACK_NAME setup-repositories
+echo "Building containers"
+$TEST_TARGET_SO  --stack $CERC_STACK_NAME build-containers
+echo "Images in registry:"
+docker image ls
+echo "Deploying the cluster"
+$TEST_TARGET_SO --stack $CERC_STACK_NAME deploy up
+# Verify that the fixturenet is up and running
+$TEST_TARGET_SO --stack $CERC_STACK_NAME deploy ps
+$TEST_TARGET_SO --stack $CERC_STACK_NAME deploy exec fixturenet-eth-bootnode-lighthouse /scripts/status-internal.sh
+initial_block_number=$($TEST_TARGET_SO --stack fixturenet-plugeth-tx deploy exec foundry "cast block-number")
+# Check that the block number increases some time later
+sleep 12
+subsequent_block_number=$($TEST_TARGET_SO  --stack $CERC_STACK_NAME deploy exec foundry "cast block-number")
+block_number_difference=$((subsequent_block_number - initial_block_number))
+# Block height difference should be between 1 and some small number
+if [[ $block_number_difference -gt 1 && $block_number_difference -lt 10 ]]; then
+  echo "Test passed"
+  test_result=0
+else
+  echo "Test failed: block numbers were ${initial_block_number} and ${subsequent_block_number}"
+  test_result=1
+fi
+$TEST_TARGET_SO --stack $CERC_STACK_NAME deploy down
+echo "Removing cloned repositories"
+rm -rf $CERC_REPO_BASE_DIR
+exit $test_result

tests/fixturenet-eth/run-test.sh

@@ -0,0 +1,80 @@
+#!/usr/bin/env bash
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+echo "$(date +"%Y-%m-%d %T"): Running stack-orchestrator Ethereum fixturenet test"
+# Bit of a hack, test the most recent package
+TEST_TARGET_SO=$( ls -t1 ./package/laconic-so* | head -1 )
+# Set a new unique repo dir
+export CERC_REPO_BASE_DIR=$(mktemp -d stack-orchestrator-fixturenet-eth-test.XXXXXXXXXX)
+echo "$(date +"%Y-%m-%d %T"): Testing this package: $TEST_TARGET_SO"
+echo "$(date +"%Y-%m-%d %T"): Test version command"
+reported_version_string=$( $TEST_TARGET_SO version )
+echo "$(date +"%Y-%m-%d %T"): Version reported is: ${reported_version_string}"
+echo "$(date +"%Y-%m-%d %T"): Cloning repositories into: $CERC_REPO_BASE_DIR"
+$TEST_TARGET_SO --stack fixturenet-eth setup-repositories
+echo "$(date +"%Y-%m-%d %T"): Building containers"
+$TEST_TARGET_SO --stack fixturenet-eth build-containers
+echo "$(date +"%Y-%m-%d %T"): Starting stack"
+$TEST_TARGET_SO --stack fixturenet-eth deploy up
+echo "$(date +"%Y-%m-%d %T"): Stack started"
+# Verify that the fixturenet is up and running
+$TEST_TARGET_SO --stack fixturenet-eth deploy ps
+# echo "$(date +"%Y-%m-%d %T"): Getting stack status"
+# $TEST_TARGET_SO --stack fixturenet-eth deploy exec fixturenet-eth-bootnode-lighthouse /scripts/status-internal.sh
+
+timeout=900 # 15 minutes
+echo "$(date +"%Y-%m-%d %T"): Getting initial block number. Timeout set to $timeout seconds"
+start_time=$(date +%s)
+elapsed_time=0
+initial_block_number=0
+while [ "$initial_block_number" -eq 0 ]  && [ $elapsed_time -lt $timeout ]; do
+  sleep 10
+  echo "$(date +"%Y-%m-%d %T"): Waiting for initial block..."
+  initial_block_number=$($TEST_TARGET_SO --stack fixturenet-eth deploy exec foundry "cast block-number")
+  current_time=$(date +%s)
+  elapsed_time=$((current_time - start_time))
+done
+
+subsequent_block_number=$initial_block_number
+
+# if initial block was 0 after timeout, assume chain did not start successfully and skip finding subsequent block
+if [[ $initial_block_number -gt 0 ]]; then
+  timeout=300
+  echo "$(date +"%Y-%m-%d %T"): Getting subsequent block number. Timeout set to $timeout seconds"
+  start_time=$(date +%s)
+  elapsed_time=0
+  # wait for 5 blocks or timeout
+  while [ "$subsequent_block_number" -le $((initial_block_number + 5)) ]  && [ $elapsed_time -lt $timeout ]; do
+    sleep 10
+    echo "$(date +"%Y-%m-%d %T"): Waiting for five blocks or $timeout seconds..."
+    subsequent_block_number=$($TEST_TARGET_SO --stack fixturenet-eth deploy exec foundry "cast block-number")
+    current_time=$(date +%s)
+    elapsed_time=$((current_time - start_time))
+  done
+fi
+
+# will return 0 if either of the above loops timed out
+block_number_difference=$((subsequent_block_number - initial_block_number))
+
+echo "$(date +"%Y-%m-%d %T"): Results of block height queries:"
+echo "Initial block height: $initial_block_number"
+echo "Subsequent block height: $subsequent_block_number"
+
+# Block height difference should be between 1 and some small number
+if [[ $block_number_difference -gt 1 && $block_number_difference -lt 100 ]]; then
+  echo "Test passed"
+  test_result=0
+else
+  echo "Test failed: block numbers were ${initial_block_number} and ${subsequent_block_number}"
+  echo "Logs from stack:"
+  $TEST_TARGET_SO --stack fixturenet-eth deploy logs
+  test_result=1
+fi
+$TEST_TARGET_SO --stack fixturenet-eth deploy down --delete-volumes
+echo "$(date +"%Y-%m-%d %T"): Removing cloned repositories"
+rm -rf $CERC_REPO_BASE_DIR
+echo "$(date +"%Y-%m-%d %T"): Test finished"
+exit $test_result

tests/fixturenet-laconicd/run-test.sh

@@ -37,7 +37,7 @@ initial_block_number=null
 while [ "$initial_block_number" == "null" ]  && [ $elapsed_time -lt $timeout ]; do
   sleep 10
   echo "$(date +"%Y-%m-%d %T"): Waiting for initial block..."
-  initial_block_number=$(docker exec laconicd-laconicd-1 /usr/bin/laconicd status | jq -r .sync_info.latest_block_height)
+  initial_block_number=$(docker exec laconicd-laconicd-1 /usr/bin/laconicd status | jq -r .SyncInfo.latest_block_height)
   current_time=$(date +%s)
   elapsed_time=$((current_time - start_time))
 done
@@ -54,7 +54,7 @@ if [[ $initial_block_number != "null" ]]; then
   while [ "$subsequent_block_number" -le $((initial_block_number + 5)) ]  && [ $elapsed_time -lt $timeout ]; do
     sleep 10
     echo "$(date +"%Y-%m-%d %T"): Waiting for five blocks or $timeout seconds..."
-    subsequent_block_number=$(docker exec laconicd-laconicd-1 /usr/bin/laconicd status | jq -r .sync_info.latest_block_height)
+    subsequent_block_number=$(docker exec laconicd-laconicd-1 /usr/bin/laconicd status | jq -r .SyncInfo.latest_block_height)
     current_time=$(date +%s)
     elapsed_time=$((current_time - start_time))
   done

tests/laconic-network/run-test.sh

@@ -4,10 +4,6 @@ if [ -n "$CERC_SCRIPT_DEBUG" ]; then
   set -x
 fi
 
-set_ownership () {
-    sudo chown $USER: -R $1
-}
-
 node_count=4
 node_dir_prefix="laconic-network-dir"
 chain_id="laconic_81337-6"
@@ -19,7 +15,7 @@ do
     node_network_dir=${node_dir_prefix}${i}
     if [[ -d $node_network_dir ]]; then
         echo "Deleting ${node_network_dir}"
-        sudo rm -rf ${node_network_dir}
+        rm -rf ${node_network_dir}
     fi
 done
 echo "Deleting any existing deployments..."
@@ -43,7 +39,6 @@ do
     node_network_dir=${node_dir_prefix}${i}
     node_moniker=${node_moniker_prefix}${i}
     laconic-so --stack mainnet-laconic deploy setup --network-dir ${node_network_dir} --initialize-network --chain-id ${chain_id} --node-moniker ${node_moniker}
-    set_ownership ${node_network_dir}
 done
 
 echo "Joining ${node_count} nodes to the network..."
@@ -52,7 +47,6 @@ do
     node_network_dir=${node_dir_prefix}${i}
     node_moniker=${node_moniker_prefix}${i}
     laconic-so --stack mainnet-laconic deploy setup --network-dir ${node_network_dir} --join-network --key-name ${node_moniker}
-    set_ownership ${node_network_dir}
 done
 
 echo "Merging ${node_count} nodes genesis txns..."
@@ -63,15 +57,11 @@ for (( i=2 ; i<=$node_count ; i++ ));
 do
     node_network_dir=${node_dir_prefix}${i}
     node_gentx_file=$(ls ${node_network_dir}/config/gentx/*.json)
-    node_gentx_address=$(grep address ${node_network_dir}/config/genesis.json | head -1 | cut -d '"' -f 4)
     gentx_files+=${delimeter}${node_gentx_file}
-    gentx_addresses+=${delimeter}${node_gentx_address}
     delimeter=","
 done
-echo "gentx files:"
-echo ${gentx_files}
 # Generate the genesis file on node 1
-laconic-so --stack mainnet-laconic deploy setup --network-dir ${node_dir_prefix}1 --create-network --gentx-files ${gentx_files} --gentx-addresses ${gentx_addresses}
+laconic-so --stack mainnet-laconic deploy setup --network-dir ${node_dir_prefix}1 --create-network --gentx-files ${gentx_files}
 genesis_file=${node_dir_prefix}1/config/genesis.json
 # Now import the genesis file to the other nodes
 for (( i=2 ; i<=$node_count ; i++ ));
@@ -79,7 +69,6 @@ do
     echo "Importing genesis.json into node ${i}"
     node_network_dir=${node_dir_prefix}${i}
     laconic-so --stack mainnet-laconic deploy setup --network-dir ${node_network_dir} --create-network --genesis-file ${genesis_file}
-    set_ownership ${node_network_dir}
 done
 
 # Create deployments

tests/smoke-test/run-smoke-test.sh

@@ -20,7 +20,7 @@ echo "Cloning repositories into: $CERC_REPO_BASE_DIR"
 rm -rf $CERC_REPO_BASE_DIR
 mkdir -p $CERC_REPO_BASE_DIR
 # Pull an example small public repo to test we can pull a repo
-$TEST_TARGET_SO setup-repositories --include cerc-io/registry-sdk
+$TEST_TARGET_SO setup-repositories --include cerc-io/laconic-sdk
 # Test pulling a stack
 $TEST_TARGET_SO --stack test setup-repositories
 # Test building the a stack container