* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
- Have `${DataDir}/bzzd.ipc` as IPC path default.
- Respect the `--datadir` flag.
- Keep only the global `--ipcpath` flag and drop the local `--ipcpath` flag
as flags might overwrite each other. (Note: before global `--ipcpath`
was ignored even if it was set)
fixes ethersphere#795
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
* build: add support for different package and binary names
* build: bump up copyright date
* build: change default PackageName to empty string
* build, internal, swarm: enhance build/release process
* build: hack ethereum-swarm as a "depends" in deb package
* build/ci: remove redundant variables
* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;
* internal: remove VERSION() method which reads VERSION file
* build: fix VersionFilePath to Version
* Makefile: remove clean_go_build_cache.sh until it works
* Makefile: revert removal of clean_go_build_cache.sh
Prior to this change, when geth was started with `geth -dev -rpc`,
it would report a network id of `1` in response to the `net_version` RPC
request. But the actual network id it used to verify transactions
was `1337`.
This change causes geth instead respond with `1337` to the `net_version`
RPC when geth is started with `geth -dev -rpc`.
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
* dashboard: footer, deep state update
* dashboard: resolve asset path
* dashboard: remove bundle.js
* dashboard: prevent state update on every reconnection
* dashboard: fix linter issue
* dashboard, cmd: minor UI fix, include commit hash
* remove geth binary
* dashboard: gitCommit renamed to commit
* dashboard: move the geth version to the right, make commit optional
* dashboard: commit limited to 7 characters
* dashboard: limit commit length on client side
* dashboard: run go generate
* common/fdlimit: Move fdlimit files to separate package
When go-ethereum is used as a library the calling program need to set
the FD limit.
This commit extract fdlimit files to a separate package so it can be
used outside of go-ethereum.
* common/fdlimit: Remove FdLimit from functions signature
* common/fdlimit: Rename fdlimit functions
* cmd/utils: Add check on hard limit, skip test if below target
* cmd/utils: Cross platform compatible fd limit test
* cmd/utils: Remove syscall.Rlimit in test
* cmd/utils: comment fd utility method
* cmd, consensus, eth: split ethash related config to it own
* eth, consensus: minor polish
* eth, consenus, console: compress pow testing config field to single one
* consensus, eth: document pow mode
* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
* ethdb: add Putter interface and Has method
* ethdb: improve docs and add IdealBatchSize
* ethdb: remove memory batch lock
Batches are not safe for concurrent use.
* core: use ethdb.Putter for Write* functions
This covers the easy cases.
* core/state: simplify StateSync
* trie: optimize local node check
* ethdb: add ValueSize to Batch
* core: optimize HasHeader check
This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.
* core: write fast sync block data in batches
Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.
* eth/downloader: commit larger state batches
Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.
* core: optimize HasBlock check
This avoids a random database read to get the number.
* core: use numberCache in HasHeader
numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.
* core: write imported block data using a batch
Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.
This commit also removes posting of logs when a forked block is imported.
* core: fix DB write error handling
* ethdb: use RLock for Has
* core: fix HasBlock comment
* core: reduce txpool event loop goroutines and sync structs
* cmd, core, eth: journal local transactions to disk
* core: journal replacement pending transactions too
* core: separate transaction journal from pool
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
This commit solves several issues concerning the genesis block:
* Genesis/ChainConfig loading was handled by cmd/geth code. This left
library users in the cold. They could specify a JSON-encoded
string and overwrite the config, but didn't get any of the additional
checks performed by geth.
* Decoding and writing of genesis JSON was conflated in
WriteGenesisBlock. This made it a lot harder to embed the genesis
block into the forthcoming config file loader. This commit changes
things so there is a single Genesis type that represents genesis
blocks. All uses of Write*Genesis* are changed to use the new type
instead.
* If the chain config supplied by the user was incompatible with the
current chain (i.e. the chain had already advanced beyond a scheduled
fork), it got overwritten. This is not an issue in practice because
previous forks have always had the highest total difficulty. It might
matter in the future though. The new code reverts the local chain to
the point of the fork when upgrading configuration.
The change to genesis block data removes compression library
dependencies from package core.
* accounts, cmd, eth, ethdb: port logs over to new system
* ethdb: drop concept of cache distribution between dbs
* eth: fix some log nitpicks to make them nicer
* common: remove CurrencyToString
Move denomination values to params instead.
* common: delete dead code
* common: move big integer operations to common/math
This commit consolidates all big integer operations into common/math and
adds tests and documentation.
There should be no change in semantics for BigPow, BigMin, BigMax, S256,
U256, Exp and their behaviour is now locked in by tests.
The BigD, BytesToBig and Bytes2Big functions don't provide additional
value, all uses are replaced by new(big.Int).SetBytes().
BigToBytes is now called PaddedBigBytes, its minimum output size
parameter is now specified as the number of bytes instead of bits. The
single use of this function is in the EVM's MSTORE instruction.
Big and String2Big are replaced by ParseBig, which is slightly stricter.
It previously accepted leading zeros for hexadecimal inputs but treated
decimal inputs as octal if a leading zero digit was present.
ParseUint64 is used in places where String2Big was used to decode a
uint64.
The new functions MustParseBig and MustParseUint64 are now used in many
places where parsing errors were previously ignored.
* common: delete unused big integer variables
* accounts/abi: replace uses of BytesToBig with use of encoding/binary
* common: remove BytesToBig
* common: remove Bytes2Big
* common: remove BigTrue
* cmd/utils: add BigFlag and use it for error-checked integer flags
While here, remove environment variable processing for DirectoryFlag
because we don't use it.
* core: add missing error checks in genesis block parser
* common: remove String2Big
* cmd/evm: use utils.BigFlag
* common/math: check for 256 bit overflow in ParseBig
This is supposed to prevent silent overflow/truncation of values in the
genesis block JSON. Without this check, a genesis block that set a
balance larger than 256 bits would lead to weird behaviour in the VM.
* cmd/utils: fixup import
* cmd/bzzd: add missing p2p/discovery flags
* cmd/bzzd: fix two bugs crashing bzzd if bootnodes flag given
* cmd/bzzd: make no swap default, renamed flag bzznoswap->bzzswap
* internal/web3ext: correct methods for bzz IPC module
* cmd/bzzd: ethapi param not mandatory. Warning if no blockchain
* cmd/bzzd: correct default IPC modules in help string
* cmd/utils: fix help description for networkId - add Ropsten
* cmd/bzz, swarm/api, swarm/network: add swarm networkId flag
* cmd/bzzd: change nosync flag to sync and BootTFlag
* core, core/types: refactored tx chain id checking
Refactored explicit chain id checking in to the Sender deriviation method
* cmd/utils, params: define chain ids
This commit implements EIP158 part 1, 2, 3 & 4
1. If an account is empty it's no longer written to the trie. An empty
account is defined as (balance=0, nonce=0, storage=0, code=0).
2. Delete an empty account if it's touched
3. An empty account is redefined as either non-existent or empty.
4. Zero value calls and zero value suicides no longer consume the 25k
reation costs.
params: moved core/config to params
Signed-off-by: Jeffrey Wilcke <jeffrey@ethereum.org>
whisper: project restructured, version 5 introduced
This commits adds a draft version of the new shh v5 protocol.
The new version is not on by default, --shh still selects version 2.
This commit converts the dependency management from Godeps to the vendor
folder, also switching the tool from godep to trash. Since the upstream tool
lacks a few features proposed via a few PRs, until those PRs are merged in
(if), use github.com/karalabe/trash.
You can update dependencies via trash --update.
All dependencies have been updated to their latest version.
Parts of the build system are reworked to drop old notions of Godeps and
invocation of the go vet command so that it doesn't run against the vendor
folder, as that will just blow up during vetting.
The conversion drops OpenCL (and hence GPU mining support) from ethash and our
codebase. The short reasoning is that there's noone to maintain and having
opencl libs in our deps messes up builds as go install ./... tries to build
them, failing with unsatisfied link errors for the C OpenCL deps.
golang.org/x/net/context is not vendored in. We expect it to be fetched by the
user (i.e. using go get). To keep ci.go builds reproducible the package is
"vendored" in build/_vendor.
This implements 1b & 1c of EIP150 by adding a new GasTable which must be
returned from the RuleSet config method. This table is used to determine
the gas prices for the current epoch.
Please note that when the CreateBySuicide gas price is set it is assumed
that we're in the new epoch phase.
In addition this PR will serve as temporary basis while refactorisation
in being done in the EVM64 PR, which will substentially overhaul the gas
price code.
The redirect check did not work on Go 1.6 and below because Stat
returned an error for stdout and stderr. In Go 1.7 Stat works on stdout
but doesn't return anything meaningful, causing cmd/geth test failures
because the message is printed to stderr only. Fix it by printing to
stdout only.
This change also deletes generator.go, moving the only interesting line
in it into release.go. The binding has been regenerated with abigen from
develop and solc v0.3.6.
The account manager was previously created by packge cmd/utils as part
of flag processing and then passed down into eth.Ethereum through its
config struct. Since we are starting to create nodes which do not have
eth.Ethereum as a registered service, the code was rearranged to
register the account manager as its own service. Making it a service is
ugly though and it doesn't really fix the root cause: creating nodes
without eth.Ethereum requires duplicating lots of code.
This commit splits utils.MakeSystemNode into three functions, making
creation of other node/service configurations easier. It also moves the
account manager into Node so it can be used by those configurations
without requiring package eth.
This implements a generic approach to enabling soft forks by allowing
anyone to put in hashes of contracts that should not be interacted from.
This will help "The DAO" in their endevour to stop any whithdrawals from
any DAO contract by convincing the mining community to accept their code
hash.
- Manager.Accounts no longer returns an error.
- Manager methods take Account instead of common.Address.
- All uses of Account with unkeyed fields are converted.
The account management API was originally implemented as a thin layer
around crypto.KeyStore, on the grounds that several kinds of key stores
would be implemented later on. It turns out that this won't happen so
KeyStore is a superflous abstraction.
In this commit crypto.KeyStore and everything related to it moves to
package accounts and is unexported.
These changes make prompting behave consistently on all platforms:
* The input buffer is now global.
Buffering was previously set up for each prompt, which can cause weird
behaviour, e.g. when running "geth account update <input.txt" where
input.txt contains three lines. In this case, the first password
prompt would fill up the buffer with all lines and then use only the
first one.
* Print the "unsupported terminal" warning only once.
Now that stdin prompting has global state, we can use it to track
the warning there.
* Work around small liner issues, particularly on Windows.
Prompting didn't work under most of the third-party terminal emulators
on Windows because liner assumes line editing is always available.
rpc: be less restrictive on the request id
rpc: improved documentation
console: upgrade web3.js to version 0.16.0
rpc: cache http connections
rpc: rename wsDomains parameter to wsOrigins
This PR introduces a 10% probability that you'll run the client with the
JIT enabled testing the new client and helps us potentially catch
errors when reported.
This feature is **disabled** for miners (disabling the JIT completely).
The JIT can however be force for miners if they enable both --jitvm and
--forcejit.
Added chain configuration options and write out during genesis database
insertion. If no "config" was found, nothing is written to the database.
Configurations are written on a per genesis base. This means
that any chain (which is identified by it's genesis hash) can have their
own chain settings.
The debug package provides an RPC wrapper for glog settings and the
debugging facilities of the Go runtime. They can be triggered through
both command line flags and the IPC listener.
This removes the burden on a single object to take care of all
validation and state processing. Now instead the validation is done by
the `core.BlockValidator` (`types.Validator`) that takes care of both
header and uncle validation through the `ValidateBlock` method and state
validation through the `ValidateState` method. The state processing is
done by a new object `core.StateProcessor` (`types.Processor`) and
accepts a new state as input and uses that to process the given block's
transactions (and uncles for rewords) to calculate the state root for
the next block (P_n + 1).
There are a bunch of changes required to make this work:
- in miner: allow unregistering agents, fix RemoteAgent.Stop
- in eth/filters: make FilterSystem.Stop not crash
- in rpc/comms: move listen loop to platform-independent code
Fixes#1930. I ran the shell loop there for a few minutes and didn't see
any changes in the memory profile.
* xeth, rpc: implement eth_getNatSpec for tx confirmations
* rename silly docserver -> httpclient
* eth/backend: httpclient now accessible via eth.Ethereum init-d via config.DocRoot
* cmd: introduce separate CLI flag for DocRoot (defaults to homedir)
* common/path: delete unused assetpath func, separate HomeDir func
* lines with leading space are ommitted from history
* exit processed even with whitespace around
* all whitespace lines (not only empty ones) are ignored
add 7 missing commands to admin api autocomplete
registrar: methods now return proper error if reg addresses are not set. fixes#1457
rpc/console: fix personal.newAccount() regression. Now all comms accept interactive password
registrar: add registrar tests for errors
crypto: catch AES decryption error on presale wallet import + fix error msg format. fixes#1580
CLI: improve error message when starting a second instance of geth. fixes#1564
cli/accounts: unlock multiple accounts. fixes#1785
* make unlocking multiple accounts work with inline <() fd
* passwdfile now correctly read only once
* improve logs
* fix CLI help text for unlocking
fix regression with docRoot / admin API
* docRoot/jspath passed to rpc/api ParseApis, which passes onto adminApi
* docRoot field for JS console in order to pass when RPC is (re)started
* improve flag desc for jspath
common/docserver: catch http errors from response
fix rpc/api tests
common/natspec: fix end to end test (skipped because takes 8s)
registrar: fix major regression:
* deploy registrars on frontier
* register HashsReg and UrlHint in GlobalRegistrar.
* set all 3 contract addresses in code
* zero out addresses first in tests
Dev mode enabled some debugging flags such as:
* VM debugging mode
* Simpler proof of work
* Whisper enabled by default
* Datadir to a tmp datadir
* Maxpeers set to 0
* Gas price of 0
* Random listen port
