When the plugin loader itself had to know the types in the arguments
and return values of the plugin functions, it was very difficult to
avoid import loops, given that the types were often defined in the
same package that needed to invoke the plugins.
Under this model, the plugin loader has much less knowledge of the
plugins themselves, and within each package we define functions to
interact with the plugins.
This makes two main changes to the plugin system:
* Instead of assuming that each plugin will have exactly one type,
inspect each plugin to see which interfaces it provides, and
register it as a provider of each provided interface. This can
allow a single .so file to provide multiple interfaces, which
will likely be necessary for aggregating certain types of info.
* Rather than using dependency injection and having to propagate
the plugin system all throughout Geth, have a default plugin
loader so we need only import the module and make calls to it.
If the plan were to integrate this into mainline Geth, I would
say we use dependency injection and take the time to pass the
plugin loader throughout the codebase, but as I expect this to
be a fork that has to pull upstream changes, this approach
should make merge conflicts much less common.
Previously, the test waited a second and then failed if geth had not
started. This caused the test to fail intermittently. This change checks
whether the IPC is open 10 times over a 5 second period and then fails
if geth is still not available.
This change adds the --catalyst flag, enabling an RPC API for eth2 integration.
In this initial version, catalyst mode also disables all peer-to-peer networking.
Co-authored-by: Mikhail Kalinin <noblesse.knight@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
The PR implements the --miner.notify.full flag that enables full pending block
notifications. When this flag is used, the block notifications sent to mining
endpoints contain the complete block header JSON instead of a work package
array.
Co-authored-by: AlexSSD7 <alexandersadovskyi7@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
This PR adds a more CLI flag, so that the les-server can serve light clients even the local node is not synced yet.
This functionality is needed in some testing environments(e.g. hive). After launching the les server, no more blocks will be imported so the node is always marked as "non-synced".
This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.
This PR introduces:
- db.put to put a value into the database
- db.get to read a value from the database
- db.delete to delete a value from the database
- db.stats to check compaction info from the database
- db.compact to trigger a db compaction
It also moves inspectdb to db.inspect.
This moves the eth config definition into a separate package, eth/ethconfig.
Packages eth and les can now import this common package instead of
importing eth from les, reducing dependencies.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change allows users to set a custom path prefix on which to mount the http-rpc
or ws-rpc handlers via the new flags --http.rpcprefix and --ws.rpcprefix.
Fixes#21826
Co-authored-by: Felix Lange <fjl@twurst.com>
Removes the yolov2 definition, adds yolov3, including EIP-2565. This PR also disables some of the erroneously generated blockchain and statetests, and adds the new genesis hash + alloc for yolov3.
This PR disables the CLI switches for yolo, since it's not complete until we merge support for 2930.
Adding warnings of free disk space left and graceful shutdown when there is not enough space left.
This also adds a flag datadir.minfreedisk which can be used to set the trigger for low disk space, and setting it to zero disables the check.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
USB enumeration still occured. Make sure it will only occur if --usb is set.
This also deprecates the 'NoUSB' config file option in favor of a new option 'USB'.
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/geth: implement vulnerability check
* cmd/geth: use minisign to verify vulnerability feed
* cmd/geth: add the test too
* cmd/geth: more minisig/signify testing
* cmd/geth: support multiple pubfiles for signing
* cmd/geth: add @holiman minisig pubkey
* cmd/geth: polishes on vulnerability check
* cmd/geth: fix ineffassign linter nit
* cmd/geth: add CVE to version check struct
* cmd/geth/testdata: add missing testfile
* cmd/geth: add more keys to versionchecker
* cmd/geth: support file:// URLs in version check
* cmd/geth: improve key ID printing when signature check fails
Co-authored-by: Felix Lange <fjl@twurst.com>
* trie: fix tests to work on 32-bit systems
* les: make test work on 32-bit platform
* cmd/geth: fix windows-issues on tests
* trie: improve balance
* cmd/geth: make account tests less verbose + less mem intense
* rpc: make debug-level log output less verbose
* cmd/geth: lint
* all: core: split vm.Config into BlockConfig and TxConfig
* core: core/vm: reset EVM between tx in block instead of creating new
* core/vm: added docs
* whisper: remove whisper
* Update cmd/geth/config.go
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* cmd/geth: warn on enabling whisper + remove more whisper deps
* mobile: remove all whisper references
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* chaincmd should make config nodes instead of full nodes
* add documentation for using makeConfigNode instead of makeFullNode;
* add documentation to functions
* code style
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
Exposing /debug/metrics and /debug/metrics/prometheus was dependent
on --pprof, which also exposes other HTTP APIs. This change makes it possible
to run the metrics server on an independent endpoint without enabling pprof.
The import command should not return a 0 status
code if the import finishes prematurely becaues
of an import error.
Returning the error causes the program to exit with 1
if the err is non nil.
Signed-off-by: meows <b5c6@protonmail.com>
* replace gosigar with gopsutil
* removed check for whether GOOS is openbsd
* removed accidental import of runtime
* potential fix for difference in units between gosig and gopsutil
* fixed lint error
* remove multiplication factor
* uses cpu.ClocksPerSec as the multiplication factor
* changed dependency from shirou to renaynay (#20)
* updated dep
* switching back from using renaynay fork to using upstream as PRs were merged on upstream
* removed empty line
* optimized imports
* tidied go mod
* cmd/clef, signer/core: use better terminal input for passwords, make it possible to avoid boot-up warning
* all: move commonly used prompter to isolated (small) package
* cmd/clef: Add new --acceptWarn to clef README
* cmd/clef: rename flag 'acceptWarn' to 'suppress-bootwarn'
Co-authored-by: ligi <ligi@ligi.de>
* cmd, core, eth: init tx lookup in background
* core/rawdb: tiny log fixes to make it clearer what's happening
* core, eth: fix rebase errors
* core/rawdb: make reindexing less generic, but more optimal
* rlp: implement rlp list iterator
* core/rawdb: new implementation of tx indexing/unindex using generic tx iterator and hashing rlp-data
* core/rawdb, cmd/utils: fix review concerns
* cmd/utils: fix merge issue
* core/rawdb: add some log formatting polishes
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* rpc flags related to starting http server renamed to http
* old rpc flags aliased and still functional
* pprof flags fixed
* renames gpo related flags
* linted
* renamed rpc flags for consistency and clarity
* added warn logs
* added more warn logs for all deprecated flags for consistency
* moves legacy flags to separate file, hides older flags under show-deprecated-flags command
* legacy prefix and moved some more legacy flags to legacy file
* fixed circular import
* added docs
* fixed imports lint error
* added notes about when flags were deprecated
* cmd/utils: group flags by deprecation date + reorder by date,
* modified deprecated comments for consistency, added warn log for --rpc
* making sure deprecated flags are still functional
* show-deprecated-flags command cleaned up
* fixed lint errors
* corrected merge conflict
* IsSet --> GlobalIsSet
* uncategorized flags, if not deprecated, displayed under misc
Co-authored-by: Martin Holst Swende <martin@swende.se>
Rather than just closing the underlying network listener to stop our
HTTP servers, use the graceful shutdown procedure, waiting for any
in-process requests to finish.
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
* cmd/utils: make goerli the default testnet
* cmd/geth: explicitly rename testnet to ropsten
* core: explicitly rename testnet to ropsten
* params: explicitly rename testnet to ropsten
* cmd: explicitly rename testnet to ropsten
* miner: explicitly rename testnet to ropsten
* mobile: allow for returning the goerli spec
* tests: explicitly rename testnet to ropsten
* docs: update readme to reflect changes to the default testnet
* mobile: allow for configuring goerli and rinkeby nodes
* cmd/geth: revert --testnet back to ropsten and mark as legacy
* cmd/util: mark --testnet flag as deprecated
* docs: update readme to properly reflect the 3 testnets
* cmd/utils: add an explicit deprecation warning on startup
* cmd/utils: swap goerli and ropsten in usage
* cmd/geth: swap goerli and ropsten in usage
* cmd/geth: if running a known preset, log it for convenience
* docs: improve readme on usage of ropsten's testnet datadir
* cmd/utils: check if legacy `testnet` datadir exists for ropsten
* cmd/geth: check for legacy testnet path in console command
* cmd/geth: use switch statement for complex conditions in main
* cmd/geth: move known preset log statement to the very top
* cmd/utils: create new ropsten configurations in the ropsten datadir
* cmd/utils: makedatadir should check for existing testnet dir
* cmd/geth: add legacy testnet flag to the copy db command
* cmd/geth: add legacy testnet flag to the inspect command
This improves error messages when the file is too short or too long.
Also rewrite the test for SaveECDSA because LoadECDSA has its own
test now.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change makes it possible to run geth with JSON-RPC over HTTP and
WebSocket on the same TCP port. The default port for WebSocket
is still 8546.
geth --rpc --rpcport 8545 --ws --wsport 8545
This also removes a lot of deprecated API surface from package rpc.
The rpc package is now purely about serving JSON-RPC and no longer
provides a way to start an HTTP server.
* node: expose config in service context
* eth: integrate p2p/dnsdisc
* cmd/geth: add some DNS flags
* eth: remove DNS URLs
* cmd/utils: configure DNS names for testnets
* params: update DNS URLs
* cmd/geth: configure mainnet DNS
* cmd/utils: rename DNS flag and fix flag processing
* cmd/utils: remove debug print
* node: fix test
Adds the 'geth dumpgenesis' command, which writes the configured
genesis in JSON format to stdout. This provides a way to generate the
data (structure and content) that can then be used with the 'geth init'
command.
This replaces the JavaScript interpreter used by the console with goja,
which is actively maintained and a lot faster than otto. Clef still uses otto
and eth/tracers still uses duktape, so we are currently dependent on three
different JS interpreters. We're looking to replace the remaining uses of otto
soon though.
* log: delete RotatingFileHandler
We added this for the dashboard, which is gone now. The
handler never really worked well and had data race and file
handling issues.
* internal/debug: remove unused RotatingFileHandler setup code
This removes the dashboard project. The dashboard was an experimental
browser UI for geth which displayed metrics and chain information in
real time. We are removing it because it has marginal utility and nobody
on the team can maintain it.
Removing the dashboard removes a lot of dependency code and shaves
6 MB off the geth binary size.
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.
* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
Most of these changes are related to the Go 1.13 changes to test binary
flag handling.
* cmd/geth: make attach tests more reliable
This makes the test wait for the endpoint to come up by polling
it instead of waiting for two seconds.
* tests: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* crypto/ecies: remove useless -dump flag in tests
* p2p/simulations: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* build: remove workaround for ./... vendor matching
This workaround was necessary for Go 1.8. The Go 1.9 release changed
the expansion rules to exclude vendored packages.
* Makefile: use relative path for GOBIN
This makes the "Run ./build/bin/..." line look nicer.
* les: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* Ref #19906 - replace passPHRASE with passWORD in any user interactions
this skips doccomments and variablenames to minimize impact. It does
however include a rename of the `ethkey` `changepassphrase` parameter
* console: fix JavaScript error capitalization
* core/state, cmd/geth: streaming json output dump cmd + optional code+storage
* dump: add option to continue even if preimages are missing
* core, evm: lint nits
* cmd: use local flags for dump, omit empty code/storage
* core/state: fix state dump test
* Add retesteth command
* Remove label and insert full version
* mineBlock - break the inner loop when the block is full
* Fixes for touched non-reward accounts, gas limit issues
* Not fail when SendTx has transaction with incorrect RLP
* Fix linter (unnecessary conversion)
* retesteth: add usage string to flag
* accounts/scwallet: Add a switch to enable smartcard support
* accounts: change the meaning of the switch
* disable card support in windows until tested
* only activate account if pcscd socket file is present
* the switch is now the path to the socket file
* accounts/scwallet: holiman's review feedback
* accounts/scwallet: send the path to go-pcsclite
* accounts/scwallet: add default, per platform path
* accounts/scwallet: fix error log warning
* accounts/scwallet: update pcsc lib to latest
* accounts/scwallet: use default path from pcsclite
* scwallet: forgot to change switch name
* cmd: minor style cleanups (error handling first, then happy path)
* core, eth: some fixes for freezer
* vendor, core/rawdb, cmd/geth: add db inspector
* core, cmd/utils: check ancient store path forceily
* cmd/geth, common, core/rawdb: a few fixes
* cmd/geth: support windows file rename and fix rename error
* core: support ancient plugin
* core, cmd: streaming file copy
* cmd, consensus, core, tests: keep genesis in leveldb
* core: write txlookup during ancient init
* core: bump database version
* core, eth, trie: bloom filter for trie node dedup during fast sync
* eth/downloader, trie: address review comments
* core, ethdb, trie: restart fast-sync bloom construction now and again
* eth/downloader: initialize fast sync bloom on startup
* eth: reenable eth/62 until we properly remove it
* add-date-to unstable
* fields-insteadof-split
* internal/build: support building with missing git
* docker: add git history back to support commit date in version
* internal/build: use PR commits hashes for PR builds
* accounts: add note about backing up the keystore
* cmd, accounts: move the printout to accountCreate
* internal, signer: add info when new account is created via rpc
* cmd, internal, signer: split logs
* cmd/geth: make account new output a bit more verbose
This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
* node: close AccountsManager in new Close method
* p2p/simulations, p2p/simulations/adapters: handle node close on shutdown
* node: move node ephemeralKeystore cleanup to stop method
* node: call Stop in Node.Close method
* cmd/geth: close node.Node created with makeFullNode in cli commands
* node: close Node instances in tests
* cmd/geth, node: minor code style fixes
* cmd, console, miner, mobile: proper node Close() termination
* cmd, eth: Added in the flag to step geth once sync based on input
* cmd, eth: 16400 Add an option to stop geth once in sync.
* cmd: 16400 Add an option to stop geth once in sync. WIP
* cmd/geth/main, les/fletcher: added in light mode support
* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode
* cmd: 16400 Fixed formatting issue and cleaned code
* cmd, eth, les: 16400 Fixed formatting issues
* cmd, eth, les: Performed gofmt to update formatting
* cmd, eth, les: Fixed bugs resulting formatting
* cmd/geth, eth/, les: switched to downloader event
* eth: Fixed styling and gen_config
* eth/: Fix nil error in config file
* cmd/geth: Updated countdown log
* les/fetcher.go: Removed depcreated channel
* eth/downloader.go: Removed deprecated select
* cmd/geth, cmd/utils: Fixed minor issues
* eth: Reverted config files to proper format
* eth: Fixed typo in config file
* cmd/geth, eth/down: Updated code to use header time stamp
* eth/downloader: Changed the time threshold to 10 minutes
* cmd/geth, eth/downloader: Updated downloading event to pass latest header
* cmd/geth: Updated main to use right timer object
* cmd/geth: Removed unused failed event
* cmd/geth: added in correct time field with type assertion
* cmd/geth, cmd/utils: Updated flag to use boolean
* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations
* cmd/geth: Removed unneeded import
* cmd/geth, eth/downloader: fixed event field and suggested changes
* cmd/geth, cmd/utils: Updated flag and linting issue
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.
This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* build: add support for different package and binary names
* build: bump up copyright date
* build: change default PackageName to empty string
* build, internal, swarm: enhance build/release process
* build: hack ethereum-swarm as a "depends" in deb package
* build/ci: remove redundant variables
* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;
* internal: remove VERSION() method which reads VERSION file
* build: fix VersionFilePath to Version
* Makefile: remove clean_go_build_cache.sh until it works
* Makefile: revert removal of clean_go_build_cache.sh
