## Issue Addressed
- #4293
- #4264
## Proposed Changes
*Changes largely follow those suggested in the main issue*.
- Add new routes to HTTP API
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Add new routes to `BeaconNodeHttpClient`
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Define new Eth2 common types
- `BroadcastValidation`, enum representing the level of validation to apply to blocks prior to broadcast
- `BroadcastValidationQuery`, the corresponding HTTP query string type for the above type
- ~~Define `_checked` variants of both `publish_block` and `publish_blinded_block` that enforce a validation level at a type level~~
- Add interactive tests to the `bn_http_api_tests` test target covering each validation level (to their own test module, `broadcast_validation_tests`)
- `beacon/blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- Only consensus pass (i.e., equivocates) (200)
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- `beacon/blinded_blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- ~~Only consensus pass (i.e., equivocates) (200)~~
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- Add a new trait, `IntoGossipVerifiedBlock`, which allows type-level guarantees to be made as to gossip validity
- Modify the structure of the `ObservedBlockProducers` cache from a `(slot, validator_index)` mapping to a `((slot, validator_index), block_root)` mapping
- Modify `ObservedBlockProducers::proposer_has_been_observed` to return a `SeenBlock` rather than a boolean on success
- Punish gossip peer (low) for submitting equivocating blocks
- Rename `BlockError::SlashablePublish` to `BlockError::SlashableProposal`
## Additional Info
This PR contains changes that directly modify how blocks are verified within the client. For more context, consult [comments in-thread](https://github.com/sigp/lighthouse/pull/4316#discussion_r1234724202).
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#3238
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
Closes#4332
## Proposed Changes
Remove the `CountUnrealized` type, defaulting unrealized justification to _on_. This fixes the #4332 issue by ensuring that importing the same block to fork choice always results in the same outcome.
Finalized sync speed may be slightly impacted by this change, but that is deemed an acceptable trade-off until the optimisation from #4118 is implemented.
TODO:
- [x] Also check that the block isn't a duplicate before importing
This PR adds the ability to read the Lighthouse logs from the HTTP API for both the BN and the VC.
This is done in such a way to as minimize any kind of performance hit by adding this feature.
The current design creates a tokio broadcast channel and mixes is into a form of slog drain that combines with our main global logger drain, only if the http api is enabled.
The drain gets the logs, checks the log level and drops them if they are below INFO. If they are INFO or higher, it sends them via a broadcast channel only if there are users subscribed to the HTTP API channel. If not, it drops the logs.
If there are more than one subscriber, the channel clones the log records and converts them to json in their independent HTTP API tasks.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Adds metrics to track validators that are submitting equivocating (but not slashable) sync messages. This follows on from some research we've been doing in a separate fork of LH.
## Additional Info
@jimmygchen and @michaelsproul have already run their eyes over this so it should be easy to get into v4.2.0, IMO.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/4291, part of #3613.
## Proposed Changes
- Implement the `el_offline` field on `/eth/v1/node/syncing`. We set `el_offline=true` if:
- The EL's internal status is `Offline` or `AuthFailed`, _or_
- The most recent call to `newPayload` resulted in an error (more on this in a moment).
- Use the `el_offline` field in the VC to mark nodes with offline ELs as _unsynced_. These nodes will still be used, but only after synced nodes.
- Overhaul the usage of `RequireSynced` so that `::No` is used almost everywhere. The `--allow-unsynced` flag was broken and had the opposite effect to intended, so it has been deprecated.
- Add tests for the EL being offline on the upcheck call, and being offline due to the newPayload check.
## Why track `newPayload` errors?
Tracking the EL's online/offline status is too coarse-grained to be useful in practice, because:
- If the EL is timing out to some calls, it's unlikely to timeout on the `upcheck` call, which is _just_ `eth_syncing`. Every failed call is followed by an upcheck [here](693886b941/beacon_node/execution_layer/src/engines.rs (L372-L380)), which would have the effect of masking the failure and keeping the status _online_.
- The `newPayload` call is the most likely to time out. It's the call in which ELs tend to do most of their work (often 1-2 seconds), with `forkchoiceUpdated` usually returning much faster (<50ms).
- If `newPayload` is failing consistently (e.g. timing out) then this is a good indication that either the node's EL is in trouble, or the network as a whole is. In the first case validator clients _should_ prefer other BNs if they have one available. In the second case, all of their BNs will likely report `el_offline` and they'll just have to proceed with trying to use them.
## Additional Changes
- Add utility method `ForkName::latest` which is quite convenient for test writing, but probably other things too.
- Delete some stale comments from when we used to support multiple execution nodes.
## Issue Addressed
#4233
## Proposed Changes
Remove the `best_justified_checkpoint` from the `PersistedForkChoiceStore` type as it is now unused.
Additionally, remove the `Option`'s wrapping the `justified_checkpoint` and `finalized_checkpoint` fields on `ProtoNode` which were only present to facilitate a previous migration.
Include the necessary code to facilitate the migration to a new DB schema.
## Proposed Changes
This change attempts to prevent failed re-orgs by:
1. Lowering the re-org cutoff from 2s to 1s. This is informed by a failed re-org attempted by @yorickdowne's node. The failed block was requested in the 1.5-2s window due to a Vouch failure, and failed to propagate to the majority of the network before the attestation deadline at 4s.
2. Allow users to adjust their re-org cutoff depending on observed network conditions and their risk profile. The static 2 second cutoff was too rigid.
3. Add a `--proposer-reorg-disallowed-offsets` flag which can be used to prohibit reorgs at certain slots. This is intended to help workaround an issue whereby reorging blocks at slot 1 are currently taking ~1.6s to propagate on gossip rather than ~500ms. This is suspected to be due to a cache miss in current versions of Prysm, which should be fixed in their next release.
## Additional Info
I'm of two minds about removing the `shuffling_stable` check which checks for blocks at slot 0 in the epoch. If we removed it users would be able to configure Lighthouse to try reorging at slot 0, which likely wouldn't work very well due to interactions with the proposer index cache. I think we could leave it for now and revisit it later.
## Issue Addressed
#4146
## Proposed Changes
Removes the `ExecutionOptimisticForkVersionedResponse` type and the associated Beacon API endpoint which is now deprecated. Also removes the test associated with the endpoint.
## Issue Addressed
N/A
## Proposed Changes
Adds a flag for disabling peer scoring. This is useful for local testing and testing small networks for new features.
> This is currently a WIP and all features are subject to alteration or removal at any time.
## Overview
The successor to #2873.
Contains the backbone of `beacon.watch` including syncing code, the initial API, and several core database tables.
See `watch/README.md` for more information, requirements and usage.
## Issue Addressed
#3708
## Proposed Changes
- Add `is_finalized_block` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `is_finalized_state` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `fork_and_execution_optimistic_and_finalized` in `beacon_node/http_api/src/state_id.rs`.
- Add `ExecutionOptimisticFinalizedForkVersionedResponse` type in `consensus/types/src/fork_versioned_response.rs`.
- Add `execution_optimistic_finalized_fork_versioned_response`function in `beacon_node/http_api/src/version.rs`.
- Add `ExecutionOptimisticFinalizedResponse` type in `common/eth2/src/types.rs`.
- Add `add_execution_optimistic_finalized` method in `common/eth2/src/types.rs`.
- Update API response methods to include finalized.
- Remove `execution_optimistic_fork_versioned_response`
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Which issue # does this PR address?
https://github.com/sigp/lighthouse/issues/3669
## Proposed Changes
Please list or describe the changes introduced by this PR.
- A new API to fetch fork choice data, as specified [here](https://github.com/ethereum/beacon-APIs/pull/232)
- A new integration test to test the new API
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
- `extra_data` field specified in the beacon-API spec is not implemented, please let me know if I should instead.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
This PR enables the user to adjust the shuffling cache size.
This is useful for some HTTP API requests which require re-computing old shufflings. This PR currently optimizes the
beacon/states/{state_id}/committees HTTP API by first checking the cache before re-building shuffling.
If the shuffling is set to a non-default value, then the HTTP API request will also fill the cache when as it constructs new shufflings.
If the CLI flag is not present or the value is set to the default of 16 the default behaviour is observed.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
When producing a block from a builder, there are two points where we could consider the block "broadcast":
1. When the blinded block is published to the builder.
2. When the un-blinded block is published to the P2P network (this is always *after* the previous step).
Our logging for late block broadcasts was using (2) for builder-blocks, which was creating a lot of false-positive logs. This is because the builder publishes the block on the P2P network themselves before returning it to us and we perform (2). For clarity, the logs were false-positives because we claim that the block was published late by us when it was actually published earlier by the builder.
This PR changes our logging behavior so we do our logging at (1) instead. It also updates our metrics for block broadcast to distinguish between local and builder blocks. I believe the metrics change will be natively compatible with existing Grafana dashboards.
## Additional Info
One could argue that the builder *should* return the block to us faster, however that's not the case. I think it's more important that we don't desensitize users with false-positives.
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse.
## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port
### Rough list of code changes
- Discovery:
- Table filter and ip mode set to match the listening config.
- Ipv6 address, tcp port and udp port set in the ENR builder
- Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
- Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
- No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
- Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
- Add fields to configure Ipv6 udp and tcp ports in the ENR
- Include advertised enr Ipv6 address.
- Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
- Kept only for ipv4
- Cli flags:
- `--listen-addresses` now can take up to two values
- `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
- `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
- `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
- `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
- `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-udp6-port` Added to configure the enr udp6 field.
- `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-tcp6-port` Added to configure the enr tcp6 field.
- `--enr-addresses` now can take two values.
- `--enr-match` updated behaviour.
- Common:
- rename `unused_port` functions to specify that they are over ipv4.
- add functions to get unused ports over ipv6.
- Testing binaries
- Updated code to reflect network config changes and unused_port changes.
## Additional Info
TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
## Proposed Changes
Two tiny updates to satisfy Clippy 1.68
Plus refactoring of the `http_api` into less complex types so the compiler can chew and digest them more easily.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#3896Closes#3998Closes#3700
## Proposed Changes
- Optimise the calculation of withdrawals for payload attributes by avoiding state clones, avoiding unnecessary state advances and reading from the snapshot cache if possible.
- Use the execution layer's payload attributes cache to avoid re-calculating payload attributes. I actually implemented a new LRU cache just for withdrawals but it had the exact same key and most of the same data as the existing payload attributes cache, so I deleted it.
- Add a new SSE event that fires when payloadAttributes are calculated. This is useful for block builders, a la https://github.com/ethereum/beacon-APIs/issues/244.
- Add a new CLI flag `--always-prepare-payload` which forces payload attributes to be sent with every fcU regardless of connected proposers. This is intended for use by builders/relays.
For maximum effect, the flags I've been using to run Lighthouse in "payload builder mode" are:
```
--always-prepare-payload \
--prepare-payload-lookahead 12000 \
--suggested-fee-recipient 0x0000000000000000000000000000000000000000
```
The fee recipient is required so Lighthouse has something to pack in the payload attributes (it can be ignored by the builder). The lookahead causes fcU to be sent at the start of every slot rather than at 8s. As usual, fcU will also be sent after each change of head block. I think this combination is sufficient for builders to build on all viable heads. Often there will be two fcU (and two payload attributes) sent for the same slot: one sent at the start of the slot with the head from `n - 1` as the parent, and one sent after the block arrives with `n` as the parent.
Example usage of the new event stream:
```bash
curl -N "http://localhost:5052/eth/v1/events?topics=payload_attributes"
```
## Additional Info
- [x] Tests added by updating the proposer re-org tests. This has the benefit of testing the proposer re-org code paths with withdrawals too, confirming that the new changes don't interact poorly.
- [ ] Benchmarking with `blockdreamer` on devnet-7 showed promising results but I'm yet to do a comparison to `unstable`.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Cleans up all the remnants of 4844 in capella. This makes sure when 4844 is reviewed there is nothing we are missing because it got included here
## Proposed Changes
drop a bomb on every 4844 thing
## Additional Info
Merge process I did (locally) is as follows:
- squash merge to produce one commit
- in new branch off unstable with the squashed commit create a `git revert HEAD` commit
- merge that new branch onto 4844 with `--strategy ours`
- compare local 4844 to remote 4844 and make sure the diff is empty
- enjoy
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Adds two new `DEBG` logs to the HTTP API:
1. As soon as we are requested to produce a block.
2. As soon as a signed block is received.
In #3858 we added some very helpful logs to the VC so we could see when things are happening with block proposals in the VC. After doing some more debugging, I found that I can tell when the VC is sending a block but I *can't* tell the time that the BN receives it (I can only get the time after the BN has started doing some work with the block). Knowing when the VC published and as soon as the BN receives is useful for determining the delays introduced by network latency (and some other things like JSON decoding, etc).
## Additional Info
NA
## Issue Addressed
#3804
## Proposed Changes
- Add `total_balance` to the validator monitor and adjust the number of historical epochs which are cached.
- Allow certain values in the cache to be served out via the HTTP API without requiring a state read.
## Usage
```
curl -X POST "http://localhost:5052/lighthouse/ui/validator_info" -d '{"indices": [0]}' -H "Content-Type: application/json" | jq
```
```
{
"data": {
"validators": {
"0": {
"info": [
{
"epoch": 172981,
"total_balance": 36566388519
},
...
{
"epoch": 172990,
"total_balance": 36566496513
}
]
},
"1": {
"info": [
{
"epoch": 172981,
"total_balance": 36355797968
},
...
{
"epoch": 172990,
"total_balance": 36355905962
}
]
}
}
}
}
```
## Additional Info
This requires no historical states to operate which mean it will still function on the freshly checkpoint synced node, however because of this, the values will populate each epoch (up to a maximum of 10 entries).
Another benefit of this method, is that we can easily cache any other values which would normally require a state read and serve them via the same endpoint. However, we would need be cautious about not overly increasing block processing time by caching values from complex computations.
This also caches some of the validator metrics directly, rather than pulling them from the Prometheus metrics when the API is called. This means when the validator count exceeds the individual monitor threshold, the cached values will still be available.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Our `ERRO` stream has been rather noisy since the merge due to some unexpected behaviours of builders and EEs. Now that we've been running post-merge for a while, I think we can drop some of these `ERRO` to `WARN` so we're not "crying wolf".
The modified logs are:
#### `ERRO Execution engine call failed`
I'm seeing this quite frequently on Geth nodes. They seem to timeout when they're busy and it rarely indicates a serious issue. We also have logging across block import, fork choice updating and payload production that raise `ERRO` or `CRIT` when the EE times out, so I think we're not at risk of silencing actual issues.
#### `ERRO "Builder failed to reveal payload"`
In #3775 we reduced this log from `CRIT` to `ERRO` since it's common for builders to fail to reveal the block to the producer directly whilst still broadcasting it to the networ. I think it's worth dropping this to `WARN` since it's rarely interesting.
I elected to stay with `WARN` since I really do wish builders would fulfill their API promises by returning the block to us. Perhaps I'm just being pedantic here, I could be convinced otherwise.
#### `ERRO "Relay error when registering validator(s)"`
It seems like builders and/or mev-boost struggle to handle heavy loads of validator registrations. I haven't observed issues with validators not actually being registered, but I see timeouts on these endpoints many times a day. It doesn't seem like this `ERRO` is worth it.
#### `ERRO Error fetching block for peer ExecutionLayerErrorPayloadReconstruction`
This means we failed to respond to a peer on the P2P network with a block they requested because of an error in the `execution_layer`. It's very common to see timeouts or incomplete responses on this endpoint whilst the EE is busy and I don't think it's important enough for an `ERRO`. As long as the peer count stays high, I don't think the user needs to be actively concerned about how we're responding to peers.
## Additional Info
NA
* Add first efforts at broadcast
* Tidy
* Move broadcast code to client
* Progress with broadcast impl
* Rename to address change
* Fix compile errors
* Use `while` loop
* Tidy
* Flip broadcast condition
* Switch to forgetting individual indices
* Always broadcast when the node starts
* Refactor into two functions
* Add testing
* Add another test
* Tidy, add more testing
* Tidy
* Add test, rename enum
* Rename enum again
* Tidy
* Break loop early
* Add V15 schema migration
* Bump schema version
* Progress with migration
* Update beacon_node/client/src/address_change_broadcast.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Fix typo in function name
---------
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Use Local Payload if More Profitable than Builder
* Rename clone -> clone_from_ref
* Minimize Clones of GetPayloadResponse
* Cleanup & Fix Tests
* Added Tests for Payload Choice by Profit
* Fix Outdated Comments
* Import BLS to execution changes before Capella
* Test for BLS to execution change HTTP API
* Pack BLS to execution changes in LIFO order
* Remove unused var
* Clippy
## Issue Addressed
Issue #3112
## Proposed Changes
Add `Filter::recover` to the GET chain to handle rejections specifically as 404 NOT FOUND
## Additional Info
Making a request to `http://localhost:5052/not_real` now returns the following:
```
{
"code": 404,
"message": "NOT_FOUND",
"stacktraces": []
}
```
Co-authored-by: Paul Hauner <paul@paulhauner.com>
I've needed to do this work in order to do some episub testing.
This version of libp2p has not yet been released, so this is left as a draft for when we wish to update.
Co-authored-by: Diva M <divma@protonmail.com>
