## Issue Addressed
#3020
## Proposed Changes
- Alias the `validators-dir` arg to `validator-dir` in the `validator_client` subcommand.
- Alias the `validator-dir` arg to `validators-dir` in the `account_manager validator` subcommand.
- Add test for the validator_client alias.
## Issue Addressed
Addresses https://github.com/sigp/lighthouse/issues/2926
## Proposed Changes
Appropriated from https://github.com/sigp/lighthouse/issues/2926#issuecomment-1039676768:
When a node returns *any* error we call [`CandidateBeaconNode::set_offline`](c3a793fd73/validator_client/src/beacon_node_fallback.rs (L424)) which sets it's `status` to `CandidateError::Offline`. That node will then be ignored until the routine [`fallback_updater_service`](c3a793fd73/validator_client/src/beacon_node_fallback.rs (L44)) manages to reconnect to it.
However, I believe there was an issue in the [`CanidateBeaconNode::refesh_status`](c3a793fd73/validator_client/src/beacon_node_fallback.rs (L157-L178)) method, which is used by the updater service to see if the node has come good again. It was holding a [write lock on the `status` field](c3a793fd73/validator_client/src/beacon_node_fallback.rs (L165)) whilst it polled the node status. This means a long timeout would hog the write lock and starve other processes.
When a VC is trying to access a beacon node for whatever purpose (getting duties, posting blocks, etc), it performs [three passes](c3a793fd73/validator_client/src/beacon_node_fallback.rs (L432-L482)) through the lists of nodes, trying to run some generic `function` (closure, lambda, etc) on each node:
- 1st pass: only try running `function` on all nodes which are both synced and online.
- 2nd pass: try running `function` on all nodes that are online, but not necessarily synced.
- 3rd pass: for each offline node, try refreshing its status and then running `function` on it.
So, it turns out that if the `CanidateBeaconNode::refesh_status` function from the routine update service is hogging the write-lock, the 1st pass gets blocked whilst trying to read the status of the first node. So, nodes that should be left until the 3rd pass are blocking the process of the 1st and 2nd passes, hence the behaviour described in #2926.
## Additional Info
NA
## Issue Addressed
#2953
## Proposed Changes
Adds empty local validator check.
## Additional Info
Two other options:
- add check inside `local_index` collection. Instead of after collection.
- Move `local_index` collection to the beginning of the `poll_sync_committee_duties` function and combine sync committee with altair fork check.
## Issue Addressed
#2883
## Proposed Changes
* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs
## Additional Info
Changed the Implementation following the discussion in #2883.
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
## Issue Addressed
Implements the standard key manager API from https://ethereum.github.io/keymanager-APIs/, formerly https://github.com/ethereum/beacon-APIs/pull/151
Related to https://github.com/sigp/lighthouse/issues/2557
## Proposed Changes
- [x] Add all of the new endpoints from the standard API: GET, POST and DELETE.
- [x] Add a `validators.enabled` column to the slashing protection database to support atomic disable + export.
- [x] Add tests for all the common sequential accesses of the API
- [x] Add tests for interactions with remote signer validators
- [x] Add end-to-end tests for migration of validators from one VC to another
- [x] Implement the authentication scheme from the standard (token bearer auth)
## Additional Info
The `enabled` column in the validators SQL database is necessary to prevent a race condition when exporting slashing protection data. Without the slashing protection database having a way of knowing that a key has been disabled, a concurrent request to sign a message could insert a new record into the database. The `delete_concurrent_with_signing` test exercises this code path, and was indeed failing before the `enabled` column was added.
The validator client authentication has been modified from basic auth to bearer auth, with basic auth preserved for backwards compatibility.
## Proposed Changes
Remove the check for exact equality on the beacon node spec when polling `/config/spec` from the VC. This check was always overzealous, and mostly served to check that the BN was configured for upcoming forks. I've replaced it by explicit checks of the `altair_fork_epoch` and `bellatrix_fork_epoch` instead.
## Additional Info
We should come back to this and clean it up so that we can retain compatibility while removing the field `default`s we installed.
## Issue Addressed
There was an overeager assert in the import of slashing protection data here:
fff01b24dd/validator_client/slashing_protection/src/slashing_database.rs (L939)
We were asserting that if the import contained any blocks for a validator, then the database should contain only a single block for that validator due to pruning/consolidation. However, we would only prune if the import contained _relevant blocks_ (that would actually change the maximum slot):
fff01b24dd/validator_client/slashing_protection/src/slashing_database.rs (L629-L633)
This lead to spurious failures (in the form of `ConsistencyError`s) when importing an interchange containing no new blocks for any of the validators. This wasn't hard to trigger, e.g. export and then immediately re-import the same file.
## Proposed Changes
This PR fixes the issue by simplifying the import so that it's more like the import for attestations. I.e. we make the assert true by always pruning when the imported file contains blocks.
In practice this doesn't have any downsides: if we import a new block then the behaviour is as before, except that we drop the `signing_root`. If we import an existing block or an old block then we prune the database to a single block. The only time this would be relevant is during extreme clock drift locally _plus_ import of a non-drifted interchange, which should occur infrequently.
## Additional Info
I've also added `Arbitrary` implementations to the slashing protection types so that we can fuzz them. I have a fuzzer sitting in a separate directory which I may or may not commit in a subsequent PR.
There's a new test in the standard interchange tests v5.2.1 that checks for this issue: https://github.com/eth-clients/slashing-protection-interchange-tests/pull/12
## Issue Addressed
New rust lints
## Proposed Changes
- Boxing some enum variants
- removing some unused fields (is the validator lockfile unused? seemed so to me)
## Additional Info
- some error fields were marked as dead code but are logged out in areas
- left some dead fields in our ef test code because I assume they are useful for debugging?
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2612
## Proposed Changes
Implements both the checks mentioned in the original issue.
1. Verifies the `randao_reveal` in the beacon node
2. Cross checks the proposer index after getting back the block from the beacon node.
## Additional info
The block production time increases by ~10x because of the signature verification on the beacon node (based on the `beacon_block_production_process_seconds` metric) when running on a local testnet.
## Issue Addressed
Part of https://github.com/sigp/lighthouse/issues/2557
## Proposed Changes
Refactor the slashing protection export so that it can export data for a subset of validators.
This is the last remaining building block required for supporting the standard validator API (which I'll start to build atop this branch)
## Additional Info
Built on and requires #2598
## Issue Addressed
Resolves#2262
## Proposed Changes
Add a new CLI flag `--beacon-nodes-tls-certs` which allows the user to specify a path to a certificate file (or a list of files, separated by commas). The VC will then use these certificates (in addition to the existing certificates in the OS trust store) when connecting to a beacon node over HTTPS.
## Additional Info
This only supports certificates in PEM format.
## Issue Addressed
Closes#2419
## Proposed Changes
Address a long-standing issue with the import of slashing protection data where the import would fail due to the data appearing slashable w.r.t the existing database. Importing is now idempotent, and will have no issues importing data that has been handed back and forth between different validator clients, or different implementations.
The implementation works by updating the high and low watermarks if they need updating, and not attempting to check if the input is slashable w.r.t itself or the database. This is a strengthening of the minification that we started to do by default since #2380, and what Teku has been doing since the beginning.
## Additional Info
The only feature we lose by doing this is the ability to do non-minified imports of clock drifted messages (cf. Prysm on Medalla). In theory, with the previous implementation we could import all the messages in case of clock drift and be aware of the "gap" between the real present time and the messages signed in the far future. _However_ for attestations this is close to useless, as the source epoch will advance as soon as justification occurs, which will require us to make slashable attestations with respect to our bogus attestation(s). E.g. if I sign an attestation 100=>200 when the current epoch is 101, then I won't be able to vote in any epochs prior to 101 becoming justified because 101=>102, 101=>103, etc are all surrounded by 100=>200. Seeing as signing attestations gets blocked almost immediately in this case regardless of our import behaviour, there's no point trying to handle it. For blocks the situation is more hopeful due to the lack of surrounds, but losing block proposals from validators who by definition can't attest doesn't seem like an issue (the other block proposers can pick up the slack).
Currently, the beacon node has no ability to serve the HTTP API over TLS.
Adding this functionality would be helpful for certain use cases, such as when you need a validator client to connect to a backup beacon node which is outside your local network, and the use of an SSH tunnel or reverse proxy would be inappropriate.
## Proposed Changes
- Add three new CLI flags to the beacon node
- `--http-enable-tls`: enables TLS
- `--http-tls-cert`: to specify the path to the certificate file
- `--http-tls-key`: to specify the path to the key file
- Update the HTTP API to optionally use `warp`'s [`TlsServer`](https://docs.rs/warp/0.3.1/warp/struct.TlsServer.html) depending on the presence of the `--http-enable-tls` flag
- Update tests and docs
- Use a custom branch for `warp` to ensure proper error handling
## Additional Info
Serving the API over TLS should currently be considered experimental. The reason for this is that it uses code from an [unmerged PR](https://github.com/seanmonstar/warp/pull/717). This commit provides the `try_bind_with_graceful_shutdown` method to `warp`, which is helpful for controlling error flow when the TLS configuration is invalid (cert/key files don't exist, incorrect permissions, etc).
I've implemented the same code in my [branch here](https://github.com/macladson/warp/tree/tls).
Once the code has been reviewed and merged upstream into `warp`, we can remove the dependency on my branch and the feature can be considered more stable.
Currently, the private key file must not be password-protected in order to be read into Lighthouse.
## Proposed Changes
Instead of checking for strict equality between a BN's spec and the VC's local spec, just check the genesis fork version. This prevents us from failing eagerly for minor differences, while still protecting the VC from connecting to a completely incompatible BN.
A warning is retained for the previous case where the specs are not exactly equal, which is to be expected if e.g. running against Infura before Infura configures the mainnet Altair fork epoch.
## Issue Addressed
NA
## Proposed Changes
Implements the "union" type from the SSZ spec for `ssz`, `ssz_derive`, `tree_hash` and `tree_hash_derive` so it may be derived for `enums`:
https://github.com/ethereum/consensus-specs/blob/v1.1.0-beta.3/ssz/simple-serialize.md#union
The union type is required for the merge, since the `Transaction` type is defined as a single-variant union `Union[OpaqueTransaction]`.
### Crate Updates
This PR will (hopefully) cause CI to publish new versions for the following crates:
- `eth2_ssz_derive`: `0.2.1` -> `0.3.0`
- `eth2_ssz`: `0.3.0` -> `0.4.0`
- `eth2_ssz_types`: `0.2.0` -> `0.2.1`
- `tree_hash`: `0.3.0` -> `0.4.0`
- `tree_hash_derive`: `0.3.0` -> `0.4.0`
These these crates depend on each other, I've had to add a workspace-level `[patch]` for these crates. A follow-up PR will need to remove this patch, ones the new versions are published.
### Union Behaviors
We already had SSZ `Encode` and `TreeHash` derive for enums, however it just did a "transparent" pass-through of the inner value. Since the "union" decoding from the spec is in conflict with the transparent method, I've required that all `enum` have exactly one of the following enum-level attributes:
#### SSZ
- `#[ssz(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[ssz(enum_behaviour = "transparent")]`
- maintains existing functionality
- not supported for `Decode` (never was)
#### TreeHash
- `#[tree_hash(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[tree_hash(enum_behaviour = "transparent")]`
- maintains existing functionality
This means that we can maintain the existing transparent behaviour, but all existing users will get a compile-time error until they explicitly opt-in to being transparent.
### Legacy Option Encoding
Before this PR, we already had a union-esque encoding for `Option<T>`. However, this was with the *old* SSZ spec where the union selector was 4 bytes. During merge specification, the spec was changed to use 1 byte for the selector.
Whilst the 4-byte `Option` encoding was never used in the spec, we used it in our database. Writing a migrate script for all occurrences of `Option` in the database would be painful, especially since it's used in the `CommitteeCache`. To avoid the migrate script, I added a serde-esque `#[ssz(with = "module")]` field-level attribute to `ssz_derive` so that we can opt into the 4-byte encoding on a field-by-field basis.
The `ssz::legacy::four_byte_impl!` macro allows a one-liner to define the module required for the `#[ssz(with = "module")]` for some `Option<T> where T: Encode + Decode`.
Notably, **I have removed `Encode` and `Decode` impls for `Option`**. I've done this to force a break on downstream users. Like I mentioned, `Option` isn't used in the spec so I don't think it'll be *that* annoying. I think it's nicer than quietly having two different union implementations or quietly breaking the existing `Option` impl.
### Crate Publish Ordering
I've modified the order in which CI publishes crates to ensure that we don't publish a crate without ensuring we already published a crate that it depends upon.
## TODO
- [ ] Queue a follow-up `[patch]`-removing PR.
[EIP-3030]: https://eips.ethereum.org/EIPS/eip-3030
[Web3Signer]: https://consensys.github.io/web3signer/web3signer-eth2.html
## Issue Addressed
Resolves#2498
## Proposed Changes
Allows the VC to call out to a [Web3Signer] remote signer to obtain signatures.
## Additional Info
### Making Signing Functions `async`
To allow remote signing, I needed to make all the signing functions `async`. This caused a bit of noise where I had to convert iterators into `for` loops.
In `duties_service.rs` there was a particularly tricky case where we couldn't hold a write-lock across an `await`, so I had to first take a read-lock, then grab a write-lock.
### Move Signing from Core Executor
Whilst implementing this feature, I noticed that we signing was happening on the core tokio executor. I suspect this was causing the executor to temporarily lock and occasionally trigger some HTTP timeouts (and potentially SQL pool timeouts, but I can't verify this). Since moving all signing into blocking tokio tasks, I noticed a distinct drop in the "atttestations_http_get" metric on a Prater node:
I think this graph indicates that freeing the core executor allows the VC to operate more smoothly.
### Refactor TaskExecutor
I noticed that the `TaskExecutor::spawn_blocking_handle` function would fail to spawn tasks if it were unable to obtain handles to some metrics (this can happen if the same metric is defined twice). It seemed that a more sensible approach would be to keep spawning tasks, but without metrics. To that end, I refactored the function so that it would still function without metrics. There are no other changes made.
## TODO
- [x] Restructure to support multiple signing methods.
- [x] Add calls to remote signer from VC.
- [x] Documentation
- [x] Test all endpoints
- [x] Test HTTPS certificate
- [x] Allow adding remote signer validators via the API
- [x] Add Altair support via [21.8.1-rc1](https://github.com/ConsenSys/web3signer/releases/tag/21.8.1-rc1)
- [x] Create issue to start using latest version of web3signer. (See #2570)
## Notes
- ~~Web3Signer doesn't yet support the Altair fork for Prater. See https://github.com/ConsenSys/web3signer/issues/423.~~
- ~~There is not yet a release of Web3Signer which supports Altair blocks. See https://github.com/ConsenSys/web3signer/issues/391.~~
## Issue Addressed
Resolves#2438Resolves#2437
## Proposed Changes
Changes the permissions for validator client http server api token file and secret key to 600 from 644. Also changes the permission for logfiles generated using the `--logfile` cli option to 600.
Logs the path to the api token instead of the actual api token. Updates docs to reflect the change.
## Issue Addressed
Related to: #2259
Made an attempt at all the necessary updates here to publish the crates to crates.io. I incremented the minor versions on all the crates that have been previously published. We still might run into some issues as we try to publish because I'm not able to test this out but I think it's a good starting point.
## Proposed Changes
- Add description and license to `ssz_types` and `serde_util`
- rename `serde_util` to `eth2_serde_util`
- increment minor versions
- remove path dependencies
- remove patch dependencies
## Additional Info
Crates published:
- [x] `tree_hash` -- need to publish `tree_hash_derive` and `eth2_hashing` first
- [x] `eth2_ssz_types` -- need to publish `eth2_serde_util` first
- [x] `tree_hash_derive`
- [x] `eth2_ssz`
- [x] `eth2_ssz_derive`
- [x] `eth2_serde_util`
- [x] `eth2_hashing`
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
* Consolidate Tokio versions: everything now uses the latest v1.10.0, no more `tokio-compat`.
* Many semver-compatible changes via `cargo update`. Notably this upgrades from the yanked v0.8.0 version of crossbeam-deque which is present in v1.5.0-rc.0
* Many semver incompatible upgrades via `cargo upgrades` and `cargo upgrade --workspace pkg_name`. Notable ommissions:
- Prometheus, to be handled separately: https://github.com/sigp/lighthouse/issues/2485
- `rand`, `rand_xorshift`: the libsecp256k1 package requires 0.7.x, so we'll stick with that for now
- `ethereum-types` is pinned at 0.11.0 because that's what `web3` is using and it seems nice to have just a single version
## Additional Info
We still have two versions of `libp2p-core` due to `discv5` depending on the v0.29.0 release rather than `master`. AFAIK it should be OK to release in this state (cc @AgeManning )
## Issue Addressed
NA
## Proposed Changes
- Adds docs for Doppelganger Protection
- Shortens a log message since it was a bit longer than our usual formatting.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
NA
## Proposed Changes
Registers validators with the doppelganger service at the earliest possible point.
This avoids the following (non-harmful, but scary) log when pruning the slashing DB on startup:
```
CRIT Validator unknown to doppelganger service, pubkey: 0xabc..., msg: preventing validator from performing duties, service: doppelganger
```
## Additional Info
NA
## Proposed Changes
* Implement the validator client and HTTP API changes necessary to support Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
This is just a cosmetic change to print only the unique list of violaters. We could repeat violaters in the list if an attestation and aggregation both were detected from the same validator.
## Issue Addressed
NA
## Proposed Changes
Fixes a bug in Doppelganger Protection which would cause false-positives when a VC is restarted in the same epoch where it has already produced a signed message.
It could also cause a false-negative in the scenario where time skips forward (perhaps due to host suspend/wake). The new `time_skips_forward_with_doppelgangers` test covers this case.
This was a simple (and embarrassing, on my behalf) `>=` instead of `<=` bug that was missed by my tests but detected during manual testing by @michaelsproul (🙏). Regression tests have been added.
## Additional Info
NA
## TODO
- [x] Add test for doppelganger in epoch > next_check_epoch
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
- Removing a bunch of unnecessary references
- Updated `Error::VariantError` to `Error::Variant`
- There were additional enum variant lints that I ignored, because I thought our variant names were fine
- removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#2454
## Proposed Changes
Adds the `--http-address` flag to allow the user to use custom HTTP addresses. This can be helpful for certain Docker setups.
Since using custom HTTP addresses is unsafe due to the server being unencrypted, `--unencrypted-http-transport` was also added as a safety flag and must be used in tandem with `--http-address`. This is to ensure the user is aware of the risks associated with using non-local HTTP addresses.
## Issue Addressed
Resolves#2313
## Proposed Changes
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
## Additional Info
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#2354
## Proposed Changes
Add a `minify` method to `slashing_protection::Interchange` that keeps only the maximum-epoch attestation and maximum-slot block for each validator. Specifically, `minify` constructs "synthetic" attestations (with no `signing_root`) containing the maximum source epoch _and_ the maximum target epoch from the input. This is equivalent to the `minify_synth` algorithm that I've formally verified in this repository:
https://github.com/michaelsproul/slashing-proofs
## Additional Info
Includes the JSON loading optimisation from #2347
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
The latest version of Rust has new clippy rules & the codebase isn't up to date with them.
## Proposed Changes
Small formatting changes that clippy tells me are functionally equivalent
## Issue Addressed
#2276
## Proposed Changes
Add the `SensitiveUrl` struct which wraps `Url` and implements custom `Display` and `Debug` traits to redact user secrets from being logged in eth1 endpoints, beacon node endpoints and metrics.
## Additional Info
This also includes a small rewrite of the eth1 crate to make requests using `Url` instead of `&str`.
Some error messages have also been changed to remove `Url` data.
## Issue Addressed
NA
## Proposed Changes
Fixes a compile error when using the `milagro` feature. I can't see any need to use the specific BLST object here. @pawanjay176 can you please confirm?
## Additional Info
NA
## Issue Addressed
Closes#2274
## Proposed Changes
* Modify the `YamlConfig` to collect unknown fields into an `extra_fields` map, instead of failing hard.
* Log a debug message if there are extra fields returned to the VC from one of its BNs.
This restores Lighthouse's compatibility with Teku beacon nodes (and therefore Infura)
## Issue Addressed
Closes#2052
## Proposed Changes
- Refactor the attester/proposer duties endpoints in the BN
- Performance improvements
- Fixes some potential inconsistencies with the dependent root fields.
- Removes `http_api::beacon_proposer_cache` and just uses the one on the `BeaconChain` instead.
- Move the code for the proposer/attester duties endpoints into separate files, for readability.
- Refactor the `DutiesService` in the VC
- Required to reduce the delay on broadcasting new blocks.
- Gets rid of the `ValidatorDuty` shim struct that came about when we adopted the standard API.
- Separate block/attestation duty tasks so that they don't block each other when one is slow.
- In the VC, use `PublicKeyBytes` to represent validators instead of `PublicKey`. `PublicKey` is a legit crypto object whilst `PublicKeyBytes` is just a byte-array, it's much faster to clone/hash `PublicKeyBytes` and this change has had a significant impact on runtimes.
- Unfortunately this has created lots of dust changes.
- In the BN, store `PublicKeyBytes` in the `beacon_proposer_cache` and allow access to them. The HTTP API always sends `PublicKeyBytes` over the wire and the conversion from `PublicKey` -> `PublickeyBytes` is non-trivial, especially when queries have 100s/1000s of validators (like Pyrmont).
- Add the `state_processing::state_advance` mod which dedups a lot of the "apply `n` skip slots to the state" code.
- This also fixes a bug with some functions which were failing to include a state root as per [this comment](072695284f/consensus/state_processing/src/state_advance.rs (L69-L74)). I couldn't find any instance of this bug that resulted in anything more severe than keying a shuffling cache by the wrong block root.
- Swap the VC block service to use `mpsc` from `tokio` instead of `futures`. This is consistent with the rest of the code base.
~~This PR *reduces* the size of the codebase 🎉~~ It *used* to reduce the size of the code base before I added more comments.
## Observations on Prymont
- Proposer duties times down from peaks of 450ms to consistent <1ms.
- Current epoch attester duties times down from >1s peaks to a consistent 20-30ms.
- Block production down from +600ms to 100-200ms.
## Additional Info
- ~~Blocked on #2241~~
- ~~Blocked on #2234~~
## TODO
- [x] ~~Refactor this into some smaller PRs?~~ Leaving this as-is for now.
- [x] Address `per_slot_processing` roots.
- [x] Investigate slow next epoch times. Not getting added to cache on block processing?
- [x] Consider [this](072695284f/beacon_node/store/src/hot_cold_store.rs (L811-L812)) in the scenario of replacing the state roots
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#1944
## Proposed Changes
Adds a "graffiti" key to the `validator_definitions.yml`. Setting the key will override anything passed through the validator `--graffiti` flag.
Returns an error if the value for the graffiti key is > 32 bytes instead of silently truncating.
## Proposed Changes
Prune the slashing protection database so that it doesn't exhibit unbounded growth. Prune by dropping attestations and blocks from more than 512 epochs ago, relying on the guards that prevent signing messages with slots or epochs less than the minimum recorded in the DB.
The pruning process is potentially time consuming, so it's scheduled to run only every 512 epochs, in the last 2/3rds of a slot. This gives it at least 4 seconds to run without impacting other signing, which I think should be sufficient. I've seen it run for several minutes (yikes!) on our Pyrmont nodes, but I suspect that 1) this will only occur on the first run when the database is still huge 2) no other production users will be impacted because they don't have enough validators per node.
Pruning also happens at start-up, as I figured this is a fairly infrequent event, and if a user is experiencing problems with the VC related to pruning, it's nice to be able to trigger it with a quick restart. Users are also conditioned to not mind missing a few attestations during a restart.
We need to include a note in the release notes that users may see the message `timed out waiting for connection` the first time they prune a huge database, but that this is totally fine and to be expected (the VC will miss those attestations in the meantime).
I'm also open to making this opt-in for now, although the sooner we get users doing it, the less painful it will be: prune early, prune often!
## Issue Addressed
NA
## Proposed Changes
Rust 1.50 has landed 🎉
The shiny new `clippy` peers down upon us mere mortals with disgust. Brutish peasants wrapping our `usize`s in superfluous `Option`s... tsk tsk.
I've performed the goat sacrifice and corrected our evil ways in this PR. Tonight we shall pray that Github Actions bestows the almighty green tick upon us.
## Additional Info
NA
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
resolves#2129resolves#2099
addresses some of #1712
unblocks #2076
unblocks #2153
## Proposed Changes
- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR.
- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.
- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue` --> PR in discv5: https://github.com/sigp/discv5/pull/58
## Additional Info
tokio 1.0 changes that required some changes in lighthouse:
- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Copied from #2083, changes the config milliseconds_per_slot to seconds_per_slot to avoid errors when slot duration is not a multiple of a second. To avoid deserializing old serialized data (with milliseconds instead of seconds) the Serialize and Deserialize derive got removed from the Spec struct (isn't currently used anyway).
This PR replaces #2083 for the purpose of fixing a merge conflict without requiring the input of @blacktemplar.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Related PR: https://github.com/sigp/lighthouse/pull/2137#issuecomment-754712492
The Fork is required for VC to perform signing. Currently, it is not guaranteed that the Fork has been obtained at the point of the signing as the Fork is obtained at after ForkService starts. We will see the [error](851a4dca3c/validator_client/src/validator_store.rs (L127)) if VC could not perform the signing due to the timing issue.
> Unable to get Fork for signing
## Proposed Changes
Obtain the Fork on `init_from_beacon_node` to fix the timing issue.
## Issue Addressed
`test_dht_persistence` failing
## Proposed Changes
Bind `NetworkService::start` to an underscore prefixed variable rather than `_`. `_` was causing it to be dropped immediately
This was failing 5/100 times before this update, but I haven't been able to get it to fail after updating it
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Fixes#2141
Remove [tempdir](https://docs.rs/tempdir/0.3.7/tempdir/) in favor of [tempfile](https://docs.rs/tempfile/3.1.0/tempfile/).
## Proposed Changes
`tempfile` has a slightly different api that makes creating temp folders with a name prefix a chore (`tempdir::TempDir::new("toto")` => `tempfile::Builder::new().prefix("toto").tempdir()`).
So I removed temp folder name prefix where I deemed it not useful.
Otherwise, the functionality is the same.
## Issue Addressed
NA
## Proposed Changes
- Removes a duplicated log in the fallback code for the VC.
- Updates the text in the remaining de-duped log.
## Additional Info
Example
```
Dec 23 05:19:54.003 WARN Beacon node is syncing endpoint: http://xxxx:5052/, head_slot: 88224, sync_distance: 161774
Dec 23 05:19:54.003 WARN Beacon node is not synced endpoint: http://xxxxx:5052/
```
## Issue Addressed
Fixes#2118
## Proposed Changes
Removes the default value in clap for `--beacon-nodes`.
This was causing issues with cli picking `--beacon-nodes` default even when not specified and overriding `--beacon-node`.
Seems like it was more evident with docker setups because it doesn't use the default `http://localhost:5052` option.
Edit: we already set the default to `http://localhost:5052` here so this shouldn't break any existing setups.
9ed65a64f8/validator_client/src/config.rs (L58)
## Additional info
Tested this with docker-compose and binaries. Works as expected in both cases.
## Issue Addressed
- Resolves#1883
## Proposed Changes
This follows on from @blacktemplar's work in #2018.
- Allows the VC to connect to multiple BN for redundancy.
- Update the simulator so some nodes always need to rely on their fallback.
- Adds some extra deprecation warnings for `--eth1-endpoint`
- Pass `SignatureBytes` as a reference instead of by value.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Closes#1264
## Proposed Changes
* Milagro BLS: tweak the feature flags so that Milagro doesn't get compiled if we're using BLST. Profiling showed that it was consuming about 1 minute of CPU time out of 60 minutes of CPU time (real time ~15 mins). A 1.6% saving.
* Reduce monomorphization: compiling for 3 different `EthSpec` types causes a heck of a lot of generic functions to be instantiated (monomorphized). Removing 2 of 3 cuts the LLVM+linking step from around 250 seconds to 180 seconds, a saving of 70 seconds (real time!). This applies only to `make` and not the CI build, because we test with the minimal spec on CI.
* Update `web3` crate to v0.13. This is perhaps the most controversial change, because it requires axing some deposit contract tools from `lcli`. I suspect these tools weren't used much anyway, and could be maintained separately, but I'm also happy to revert this change. However, it does save us a lot of compile time. With #1839, we now have 3 versions of Tokio (and all of Tokio's deps). This change brings us down to 2 versions, but 1 should be achievable once web3 (and reqwest) move to Tokio 0.3.
* Remove `lcli` from the Docker image. It's a dev tool and can be built from the repo if required.
## Issue Addressed
#1992 and #1987, and also to be considered a continuation of #1751
## Proposed Changes
many changed files but most are renaming to align the code with the semantics of `--network`
- remove the `--network` default value (in clap) and instead set it after checking the `network` and `testnet-dir` flags
- move `eth2_testnet_config` crate to `eth2_network_config`
- move `Eth2TestnetConfig` to `Eth2NetworkConfig`
- move `DEFAULT_HARDCODED_TESTNET` to `DEFAULT_HARDCODED_NETWORK`
- `beacon_node`s `get_eth2_testnet_config` loads the `DEFAULT_HARDCODED_NETWORK` if there is no network nor testnet provided
- `boot_node`s config loads the config same as the `beacon_node`, it was using the configuration only for preconfigured networks (That code is ~1year old so I asume it was not intended)
- removed a one year old comment stating we should try to emulate `https://github.com/eth2-clients/eth2-testnets/tree/master/nimbus/testnet1` it looks outdated (?)
- remove `lighthouse`s `load_testnet_config` in favor of `get_eth2_network_config` to centralize that logic (It had differences)
- some spelling
## Additional Info
Both the command of #1992 and the scripts of #1987 seem to work fine, same as `bn` and `vc`
## Issue Addressed
NA
## Proposed Changes
Updates out of date dependencies.
## Additional Info
See also https://github.com/sigp/lighthouse/issues/1712 for a list of dependencies that are still out of date and the resasons.
Fixes a couple of low hanging fruits.
- Fixes#2037
- `validators-dir` and `secrets-dir` flags don't really need to depend upon each other
- Fixes#2006 and Fixes#1995
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Closes#1823
## Proposed Changes
* Use OS-level file locking for validator keystores, eliminating problems with lockfiles lingering after ungraceful shutdowns (`SIGKILL`, power outage). I'm using the `fs2` crate because it's cross-platform (unlike `file-lock`), and it seems to have the most downloads on crates.io.
* Deprecate + disable `--delete-lockfiles` CLI param, it's no longer necessary
* Delete the `validator_dir::Manager`, as it was mostly dead code and was only used in the `validator list` command, which has been rewritten to read the validator definitions YAML instead.
## Additional Info
Tested on:
- [x] Linux
- [x] macOS
- [x] Docker Linux
- [x] Docker macOS
- [ ] Windows
## Issue Addressed
NA
## Proposed Changes
- Adds a HTTP server to the VC which provides Prometheus metrics.
- Moves the health metrics into the `lighthouse_metrics` crate so it can be shared between BN/VC.
- Sprinkle some metrics around the VC.
- Update the book to indicate that we now have VC metrics.
- Shifts the "waiting for genesis" logic later in the `ProductionValidatorClient::new_from_cli`
- This is worth attention during the review.
## Additional Info
- ~~`clippy` has some new lints that are failing. I'll deal with that in another PR.~~
## Issue Addressed
Closes#1873
## Proposed Changes
Fixes the bug in slashing protection import (#1873) by pruning the database upon import.
Also expands the test generator to cover this case and a few others which are under discussion here:
https://ethereum-magicians.org/t/eip-3076-validator-client-interchange-format-slashing-protection/4883
## Additional Info
Depending on the outcome of the discussion on Eth Magicians, we can either wait for consensus before merging, or merge our preferred solution and patch things later.
## Issue Addressed
Closes#1790
## Proposed Changes
Make a new method that creates an empty transaction with `TransactionBehavior::Exclusive` to check whether the slashing protection is locked. Call this method before attempting to create or import new validator keystores.
## Additional Info
N/A
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
- Resolves#1424
## Proposed Changes
Add a `GET lighthouse/staking` that returns 200 if the node is ready to stake (i.e., `--eth1` flag is present) or a 404 otherwise.
Whilst the VC is waiting for the genesis time to start (i.e., when the genesis state is known), check the `lighthouse/staking` endpoint and log an error if the node isn't configured for staking.
## Additional Info
NA
## Issue Addressed
Closes#1889
## Proposed Changes
- Error when passwords which use invalid UTF-8 characters during encryption.
- Add some tests
## Additional Info
I've decided to error when bad characters are used to create/encrypt a keystore but think we should allow them during decryption since either the keystore was created
- with invalid UTF-8 characters (possibly by another client or someone whose password is random bytes) in which case we'd want them to be able to decrypt their keystore using the right key.
- without invalid characters then the password checksum would almost certainly fail.
Happy to add them to decryption if we want to make the decryption more trigger happy 😋 , it would only be a one line change and would tell the user which character index is causing the issue.
See https://eips.ethereum.org/EIPS/eip-2335#password-requirements
## Issue Addressed
Catching up on a few eth2 spec updates:
## Proposed Changes
- adding query params to the `GET pool/attestations` endpoint
- allowing the `POST pool/attestations` endpoint to accept an array of attestations
- batching attestation submission
- moving `epoch` from a path param to a query param in the `committees` endpoint
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1809Resolves#1824Resolves#1818Resolves#1828 (hopefully)
## Proposed Changes
- add `validator_index` to the proposer duties endpoint
- add the ability to query for historical proposer duties
- `StateId` deserialization now fails with a 400 warp rejection
- add the `validator_balances` endpoint
- update the `aggregate_and_proofs` endpoint to accept an array
- updates the attester duties endpoint from a `GET` to a `POST`
- reduces the number of times we query for proposer duties from once per slot per validator to only once per slot
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Improves the deletion of the validator key cache lock file in case of program interrupts.
## Additional Info
This should reduce cases where a lock file doesn't get removed on shutdown and reduce complaints on Discord. This will be superseded by issue #1823.
## Proposed Changes
Update the slashing protection interchange format to v5 in preparation for finalisation as part of an EIP.
Also, add some more tests and update the commit hash for https://github.com/eth2-clients/slashing-protection-interchange-tests to include the new generated tests.
## Issue Addressed
Closes#1504Closes#1505
Replaces #1703Closes#1707
## Proposed Changes
* Update BLST and Milagro to versions compatible with BLSv4 spec
* Update Lighthouse to spec v1.0.0-rc.0, and update EF test vectors
* Use the v1.0.0 constants for `MainnetEthSpec`.
* Rename `InteropEthSpec` -> `V012LegacyEthSpec`
* Change all constants to suit the mainnet `v0.12.3` specification (i.e., Medalla).
* Deprecate the `--spec` flag for the `lighthouse` binary
* This value is now obtained from the `config_name` field of the `YamlConfig`.
* Built in testnet YAML files have been updated.
* Ignore the `--spec` value, if supplied, log a warning that it will be deprecated
* `lcli` still has the spec flag, that's fine because it's dev tooling.
* Remove the `E: EthSpec` from `YamlConfig`
* This means we need to deser the genesis `BeaconState` on-demand, but this is fine.
* Swap the old "minimal", "mainnet" strings over to the new `EthSpecId` enum.
* Always require a `CONFIG_NAME` field in `YamlConfig` (it used to have a default).
## Additional Info
Lots of breaking changes, do not merge! ~~We will likely need a Lighthouse v0.4.0 branch, and possibly a long-term v0.3.0 branch to keep Medalla alive~~.
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Panic or return error if we overflow `usize` in SSZ decoding/encoding derive macros.
- I claim that the panics can only be triggered by a faulty type definition in lighthouse, they cannot be triggered externally on a validly defined struct.
- Use `Ordering` instead of some `if` statements, as demanded by clippy.
- Remove some old clippy `allow` that seem to no longer be required.
- Add comments to interesting clippy statements that we're going to continue to ignore.
- Create #1713
## Additional Info
NA
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
NA
## Proposed Changes
- Don't exit early if the VC is without any validators.
- When there are no validators, always create the slashing database (even without `--init-slashing-protection`).
## Proposed Changes
* Add documentation about slashing protection, including how to troubleshoot issues and move between clients.
* Add an error message if the validator client is started with 0 validators. Previously it would hit an error relating to the slashing protection database not existing, which wrongly pushed people towards using the unsafe `--init-slashing-protection` flag.
It looks like the default docker image used by cross doesn't have
wget installed. This causes builds to fail. This can be fixed by
switching to curl.
## Issue Addressed
cross-compiling was broken (at least for build-aarch64)
## Proposed Changes
swap wget for curl
## Issue Addressed
#1618
## Proposed Changes
Adds an encrypted key cache that is loaded on validator_client startup. It stores the keypairs for all enabled keystores and uses as password the concatenation the passwords of all enabled keystores. This reduces the number of time intensive key derivitions for `N` validators from `N` to `1`. On changes the cache gets updated asynchronously to avoid blocking the main thread.
## Additional Info
If the cache contains the keypair of a keystore that is not in the validator_definitions.yml file during loading the cache cannot get decrypted. In this case all the keystores get decrypted and then the cache gets overwritten. To avoid that one can disable keystores in validator_definitions.yml and restart the client which will remove them from the cache, after that one can entirely remove the keystore (from the validator_definitions.yml and from the disk).
Other solutions to the above "problem" might be:
* Add a CLI and/or API function for removing keystores which will update the cache (asynchronously).
* Add a CLI and/or API function that just updates the cache (asynchronously) after a modification of the `validator_definitions.yml` file.
Note that the cache file has a lock file which gets removed immediatly after the cache was used or updated.
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
## Issue Addressed
- Resolves#1705
## Proposed Changes
Cleans up some of my TODOs in the code base.
- Adds link to issue in this repo for BLST `unsafe` block.
- Confirms that the `nextaccount` field *is* required on an EIP-2386 wallet.
- Reference: https://github.com/mcdee/EIPs/blob/master/EIPS/eip-2386.md#json-schema
- Removes TODO about Zeroize on bip39 that was resolved in #1701
- Removes a TODO about an early randao reveal since we use the slot clock to generate the reveal: c4bd9c86e6/validator_client/src/block_service.rs (L212-L220)
## Additional Info
NA
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
## Issue Addressed
Implements support for importing and exporting the slashing protection DB interchange format described here:
https://hackmd.io/@sproul/Bk0Y0qdGD
Also closes#1584
## Proposed Changes
* [x] Support for serializing and deserializing the format
* [x] Support for importing and exporting Lighthouse's database
* [x] CLI commands to invoke import and export
* [x] Export to minimal format (required when a minimal format has been previously imported)
* [x] Tests for export to minimal (utilising mixed importing and attestation signing?)
* [x] Tests for import/export of complete format, and import of minimal format
* [x] ~~Prevent attestations with sources less than our max source (Danny's suggestion). Required for the fake attestation that we put in for the minimal format to block attestations from source 0.~~
* [x] Add the concept of a "low watermark" for compatibility with the minimal format
Bonus!
* [x] A fix to a potentially nasty bug involving validators getting re-registered each time the validator client ran! Thankfully, the ordering of keys meant that the validator IDs used for attestations and blocks remained stable -- otherwise we could have had some slashings on our hands! 😱
* [x] Tests to confirm that this bug is indeed vanquished
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1313
## Proposed Changes
Changes the way we start the validator client and beacon node to ensure that we cleanly drop the validator keystores (which therefore ensures we cleanup their lockfiles).
Previously we were holding the validator keystores in a tokio task that was being forcefully killed (i.e., without `Drop`). Now, we hold them in a task that can gracefully handle a shutdown.
Also, switches the `--strict-lockfiles` flag to `--delete-lockfiles`. This means two things:
1. We are now strict on lockfiles by default (before we weren't).
1. There's a simple way for people delete the lockfiles if they experience a crash.
## Additional Info
I've only given the option to ignore *and* delete lockfiles, not just ignore them. I can't see a strong need for ignore-only but could easily add it, if the need arises.
I've flagged this as `api-breaking` since users that have lockfiles lingering around will be required to supply `--delete-lockfiles` next time they run.
## Issue Addressed
#1419
## Proposed Changes
Creates a `--graffiti` cli flag in the validator client. If the flag is set, it overrides graffiti in the beacon node.
## Additional Info
## Issue Addressed
NA
## Proposed Changes
- Refactor the `bls` crate to support multiple BLS "backends" (e.g., milagro, blst, etc).
- Removes some duplicate, unused code in `common/rest_types/src/validator.rs`.
- Removes the old "upgrade legacy keypairs" functionality (these were unencrypted keys that haven't been supported for a few testnets, no one should be using them anymore).
## Additional Info
Most of the files changed are just inconsequential changes to function names.
## TODO
- [x] Optimization levels
- [x] Infinity point: https://github.com/supranational/blst/issues/11
- [x] Ensure milagro *and* blst are tested via CI
- [x] What to do with unsafe code?
- [x] Test infinity point in signature sets
## Issue Addressed
NA
## Proposed Changes
- Introduces the `valdiator_definitions.yml` file which serves as an explicit list of validators that should be run by the validator client.
- Removes `--strict` flag, split into `--strict-lockfiles` and `--disable-auto-discover`
- Adds a "Validator Management" page to the book.
- Adds the `common/account_utils` crate which contains some logic that was starting to duplicate across the codebase.
The new docs for this feature are the best description of it (apart from the code, I guess): 9cb87e93ce/book/src/validator-management.md
## API Changes
This change should be transparent for *most* existing users. If the `valdiator_definitions.yml` doesn't exist then it will be automatically generated using a method that will detect all the validators in their `validators_dir`.
Users will have issues if they are:
1. Using `--strict`.
1. Have keystores in their `~/.lighthouse/validators` directory that weren't being detected by the current keystore discovery method.
For users with (1), the VC will refuse to start because the `--strict` flag has been removed. They will be forced to review `--help` and choose an equivalent flag.
For users with (2), this seems fairly unlikely and since we're only in testnets there's no *real* value on the line here. I'm happy to take the risk, it would be a different case for mainnet.
## Additional Info
This PR adds functionality we will need for #1347.
## TODO
- [x] Reconsider flags
- [x] Move doc into a more reasonable chapter.
- [x] Check for compile warnings.
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Add compute_subnet_for_attestation
* Replace CommitteeIndex topic with Attestation
* Fix warnings
* Fix attestation service tests
* fmt
* Appease clippy
* return error from validator_subscriptions
* move state out of loop
* Fix early break on error
* Get state from slot clock
* Fix beacon state in attestation tests
* Add failing test for lookahead > 1
* Minor change
* Address some review comments
* Add subnet verification to beacon chain
* Move subnet verification to processor
* Pass committee_count_at_slot to ValidatorDuty and ValidatorSubscription
* Pass subnet id for publishing attestations
* Fix attestation service tests
* Fix more tests
* Fix fork choice test
* Remove unused code
* Remove more unused and expensive code
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add logging on shutdown
* Replace tokio::spawn with handle.spawn
* Upgrade tokio
* Add a task executor
* Beacon chain tasks use task executor
* Validator client tasks use task executor
* Rename runtime_handle to executor
* Add duration histograms; minor fixes
* Cleanup
* Fix logs
* Fix tests
* Remove random file
* Get enr dependency instead of libp2p
* Address some review comments
* Libp2p takes a TaskExecutor
* Ugly fix libp2p tests
* Move TaskExecutor to own file
* Upgrade Dockerfile rust version
* Minor fixes
* Revert "Ugly fix libp2p tests"
This reverts commit 58d4bb690f52de28d893943b7504d2d0c6621429.
* Pretty fix libp2p tests
* Add spawn_without_exit; change Counter to Gauge
* Tidy
* Move log from RuntimeContext to TaskExecutor
* Fix errors
* Replace histogram with int_gauge for async tasks
* Fix todo
* Fix memory leak in test by exiting all spawned tasks at the end
* Implement slashing protection
Roll-up of #588 with some conflicts resolved
* WIP improvements
* Require slot uniqueness for blocks (rather than epochs)
* Native DB support for Slot and Epoch
* Simplify surrounding/surrounded-by queries
* Implement unified slashing protection database
A single SQL database saves on open file descriptors.
* Make slashing protection concurrency safe.
Revive tests, add parallel tests.
* Some simplifications
* Auto-registration, test clean-ups
* More tests, clean-ups, hardening
* Fix comments in BLS
* Optimise bulk validator registration
* Delete outdated tests
* Use bundled SQLite in slashing protection
* Auto-register validators in simulation
* Use real signing_root in slashing protection
* Update book for --auto-register
* Refine log messages and help flags
* Correct typo in Cargo.toml authors
* Fix merge conflicts
* Safer error handling in sqlite slot/epoch
* Address review comments
* Add attestation test mutating block root
Co-authored-by: pscott <scottpiriou@gmail.com>
* Port eth1 lib to use stable futures
* Port eth1_test_rig to stable futures
* Port eth1 tests to stable futures
* Port genesis service to stable futures
* Port genesis tests to stable futures
* Port beacon_chain to stable futures
* Port lcli to stable futures
* Fix eth1_test_rig (#1014)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Update hashmap hashset to stable futures
* Adds panic test to hashset delay
* Port remote_beacon_node to stable futures
* Fix lcli merge conflicts
* Non rpc stuff compiles
* protocol.rs compiles
* Port websockets, timer and notifier to stable futures (#1035)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Port remote_beacon_node to stable futures
* Partial eth2-libp2p stable future upgrade
* Finished first round of fighting RPC types
* Further progress towards porting eth2-libp2p adds caching to discovery
* Update behaviour
* RPC handler to stable futures
* Update RPC to master libp2p
* Network service additions
* Fix the fallback transport construction (#1102)
* Correct warning
* Remove hashmap delay
* Compiling version of eth2-libp2p
* Update all crates versions
* Fix conversion function and add tests (#1113)
* Port validator_client to stable futures (#1114)
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Revert "Update hashmap hashset to stable futures"
This reverts commit d432378a3cc5cd67fc29c0b15b96b886c1323554.
* Revert "Adds panic test to hashset delay"
This reverts commit 281502396fc5b90d9c421a309c2c056982c9525b.
* Ported attestation_service
* Ported duties_service
* Ported fork_service
* More ports
* Port block_service
* Minor fixes
* VC compiles
* Update TODOS
* Borrow self where possible
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Re-Fix attestation and duties service
* Minor fixes
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Network crate update to stable futures
* Port account_manager to stable futures (#1121)
* Port account_manager to stable futures
* Run async fns in tokio environment
* Port rest_api crate to stable futures (#1118)
* Port rest_api lib to stable futures
* Reduce tokio features
* Update notifier to stable futures
* Builder update
* Further updates
* Convert self referential async functions
* stable futures fixes (#1124)
* Fix eth1 update functions
* Fix genesis and client
* Fix beacon node lib
* Return appropriate runtimes from environment
* Fix test rig
* Refactor eth1 service update
* Upgrade simulator to stable futures
* Lighthouse compiles on stable futures
* Remove println debugging statement
* Update libp2p service, start rpc test upgrade
* Update network crate for new libp2p
* Update tokio::codec to futures_codec (#1128)
* Further work towards RPC corrections
* Correct http timeout and network service select
* Use tokio runtime for libp2p
* Revert "Update tokio::codec to futures_codec (#1128)"
This reverts commit e57aea924acf5cbabdcea18895ac07e38a425ed7.
* Upgrade RPC libp2p tests
* Upgrade secio fallback test
* Upgrade gossipsub examples
* Clean up RPC protocol
* Test fixes (#1133)
* Correct websocket timeout and run on os thread
* Fix network test
* Clean up PR
* Correct tokio tcp move attestation service tests
* Upgrade attestation service tests
* Correct network test
* Correct genesis test
* Test corrections
* Log info when block is received
* Modify logs and update attester service events
* Stable futures: fixes to vc, eth1 and account manager (#1142)
* Add local testnet scripts
* Remove whiteblock script
* Rename local testnet script
* Move spawns onto handle
* Fix VC panic
* Initial fix to block production issue
* Tidy block producer fix
* Tidy further
* Add local testnet clean script
* Run cargo fmt
* Tidy duties service
* Tidy fork service
* Tidy ForkService
* Tidy AttestationService
* Tidy notifier
* Ensure await is not suppressed in eth1
* Ensure await is not suppressed in account_manager
* Use .ok() instead of .unwrap_or(())
* RPC decoding test for proto
* Update discv5 and eth2-libp2p deps
* Fix lcli double runtime issue (#1144)
* Handle stream termination and dialing peer errors
* Correct peer_info variant types
* Remove unnecessary warnings
* Handle subnet unsubscription removal and improve logigng
* Add logs around ping
* Upgrade discv5 and improve logging
* Handle peer connection status for multiple connections
* Improve network service logging
* Improve logging around peer manager
* Upgrade swarm poll centralise peer management
* Identify clients on error
* Fix `remove_peer` in sync (#1150)
* remove_peer removes from all chains
* Remove logs
* Fix early return from loop
* Improved logging, fix panic
* Partially correct tests
* Stable futures: Vc sync (#1149)
* Improve syncing heuristic
* Add comments
* Use safer method for tolerance
* Fix tests
* Stable futures: Fix VC bug, update agg pool, add more metrics (#1151)
* Expose epoch processing summary
* Expose participation metrics to prometheus
* Switch to f64
* Reduce precision
* Change precision
* Expose observed attesters metrics
* Add metrics for agg/unagg attn counts
* Add metrics for gossip rx
* Add metrics for gossip tx
* Adds ignored attns to prom
* Add attestation timing
* Add timer for aggregation pool sig agg
* Add write lock timer for agg pool
* Add more metrics to agg pool
* Change map lock code
* Add extra metric to agg pool
* Change lock handling in agg pool
* Change .write() to .read()
* Add another agg pool timer
* Fix for is_aggregator
* Fix pruning bug
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
