## Proposed Changes
Add a new hardcoded spec for the Gnosis Beacon Chain.
Ideally, official Lighthouse executables will be able to connect to the gnosis beacon chain from now on, using `--network gnosis` CLI option.
## Issue Addressed
This PR fixes the unnecessary `WARN Single block lookup failed` messages described here:
https://github.com/sigp/lighthouse/pull/2866#issuecomment-1008442640
## Proposed Changes
Add a new cache to the `BeaconChain` that tracks the block roots of blocks from before finalization. These could be blocks from the canonical chain (which might need to be read from disk), or old pre-finalization blocks that have been forked out.
The cache also stores a set of block roots for in-progress single block lookups, which duplicates some of the information from sync's `single_block_lookups` hashmap:
a836e180f9/beacon_node/network/src/sync/manager.rs (L192-L196)
On a live node you can confirm that the cache is working by grepping logs for the message: `Rejected attestation to finalized block`.
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the attestation performances of a validator (or all validators) over a discrete range of epochs.
Performances can be computed for a single validator, or for the global validator set.
## Usage
### Request
The API can be used as follows:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/{validator_index}?start_epoch=57730&end_epoch=57732"
```
Alternatively, to compute performances for the global validator set:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/global?start_epoch=57730&end_epoch=57732"
```
### Response
The response is JSON formatted as follows:
```
[
{
"index": 72,
"epochs": {
"57730": {
"active": true,
"head": false,
"target": false,
"source": false
},
"57731": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
"57732": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
}
}
]
```
> Note that the `"epochs"` are not guaranteed to be in ascending order.
## Additional Info
- This API is intended to be used in our upcoming validator analysis tooling (#2873) and will likely not be very useful for regular users. Some advanced users or block explorers may find this API useful however.
- The request range is limited to 100 epochs (since the range is inclusive and it also computes the `end_epoch` it's actually 101 epochs) to prevent Lighthouse using exceptionally large amounts of memory.
## Issue Addressed
Currently performing a voluntary exit prompts for manual confirmation. This prevents automation of exits.
## Proposed Changes
Add the flag `--no-confirmation` to the account manager when performing voluntary exits to bypass this manual confirmation.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2857
## Proposed Changes
Explicitly set GNU malloc's MMAP_THRESHOLD to 128KB, disabling dynamic adjustments. For rationale see the linked issue.
Checking how to priorize the polling of the network I moved most of the service code to functions. This change I think it's worth on it's own for code quality since inside the `tokio::select` many tools don't work (cargo fmt, sometimes clippy, and sometimes even the compiler's errors get wack). This is functionally equivalent to the previous code, just better organized
## Proposed Changes
Initially the idea was to remove hashing of blocks in backfill sync. After considering it more, we conclude that we need to do it in both (forward and backfill) anyway. But since we forgot why we were doing it in the first place, this PR documents this logic.
Future us should find it useful
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
Resolves https://github.com/sigp/lighthouse/issues/2763
## Proposed Changes
- Add a workflow which tests that local testnet starts successfully
- Added `set` option into the scripts in order to fail fast so that we can notice errors during starting local testnet.
- Fix errors on MacOS
- The redirect `&>>` is supported since bash v4 but the version bundled in macOS(11.6.1) is v3. a54f119c9b
## Issue Addressed
NA
## Proposed Changes
- Bump Lighthouse version to v2.1.1
- Update `thread_local` from v1.1.3 to v1.1.4 to address https://rustsec.org/advisories/RUSTSEC-2022-0006
## Additional Info
- ~~Blocked on #2950~~
- ~~Blocked on #2952~~
## Proposed Changes
Remove the check for exact equality on the beacon node spec when polling `/config/spec` from the VC. This check was always overzealous, and mostly served to check that the BN was configured for upcoming forks. I've replaced it by explicit checks of the `altair_fork_epoch` and `bellatrix_fork_epoch` instead.
## Additional Info
We should come back to this and clean it up so that we can retain compatibility while removing the field `default`s we installed.
In the latest release we decreased the target number of subnet peers.
It appears this could be causing issues in some cases and so reverting it back to the previous number it wise. A larger PR that follows this will address some other related discovery issues and peer management around subnet peer discovery.
## Proposed Changes
This PR establishes compatibility between Lighthouse's VC and Nimbus's BN.
Lighthouse was previously `POST`ing unquoted lists of validator indices to the attester and sync duties endpoints which were (correctly) not accepted by Nimbus. These lists had slipped through the cracks because they didn't have an explicit wrapper type to add `serde` annotations to. I've added the `ValidatorIndexDataRef` newtype in order to implement the modified serialisation behaviour.
## Testing
Combined with https://github.com/sigp/lighthouse/pull/2940, I've confirmed that this PR allows my Lighthouse VC on Prater to validate with the public Nimbus BN listed here: https://github.com/status-im/nimbus-eth2#quickly-test-your-tooling-against-nimbus. I haven't had a block proposal yet, but attestations and sync committee messages are working.
## Additional Info
This may also provide compatibility with Prysm BNs but I haven't had a chance to test that yet.
## Issue Addressed
Continuation to #2934
## Proposed Changes
Currently, we have the transition fields in the config (`TERMINAL_TOTAL_DIFFICULTY`, `TERMINAL_BLOCK_HASH` and `TERMINAL_BLOCK_HASH_ACTIVATION_EPOCH`) as mandatory fields.
This is causing compatibility issues with other client BN's (nimbus and teku v22.1.0) which don't return these fields on a `eth/v1/config/spec` api call. Since we don't use this values until the merge, I think it's okay to have default values set for these fields as well to ensure compatibility.
#2923
Which issue # does this PR address?
There's a redundant field on the BeaconChain called disabled_forks that was once part of our fork-aware networking (#953) but which is no longer used and could be deleted. so Removed all references to disabled_forks so that the code compiles and git grep disabled_forks returns no results.
## Proposed Changes
Please list or describe the changes introduced by this PR.
Removed all references of disabled_forks
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
We emit a warning to verify that all peer connection state information is consistent. A warning is given under one edge case;
We try to dial a peer with peer-id X and multiaddr Y. The peer responds to multiaddr Y with a different peer-id, Z. The dialing to the peer fails, but libp2p injects the failed attempt as peer-id Z.
In this instance, our PeerDB tries to add a new peer in the disconnected state under a previously unknown peer-id. This is harmless and so this PR permits this behaviour without logging a warning.
## Issue Addressed
#2900
## Proposed Changes
Change type of extra_fields in ConfigAndPreset so it can contain non string values (inside serde_json::Value)
## Issues Addressed
Closes#2739Closes#2812
## Proposed Changes
Support the deserialization of query strings containing duplicate keys into their corresponding types.
As `warp` does not support this feature natively (as discussed in #2739), it relies on the external library [`serde_array_query`](https://github.com/sigp/serde_array_query) (written by @michaelsproul)
This is backwards compatible meaning that both of the following requests will produce the same output:
```
curl "http://localhost:5052/eth/v1/events?topics=head,block"
```
```
curl "http://localhost:5052/eth/v1/events?topics=head&topics=block"
```
## Additional Info
Certain error messages have changed slightly. This only affects endpoints which accept multiple values.
For example:
```
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
is now
```
{"code":400,"message":"BAD_REQUEST: unable to parse query","stacktraces":[]}
```
The serve order of the endpoints `get_beacon_state_validators` and `get_beacon_state_validators_id` have flipped:
```rust
.or(get_beacon_state_validators_id.boxed())
.or(get_beacon_state_validators.boxed())
```
This is to ensure proper error messages when filter fallback occurs due to the use of the `and_then` filter.
## Future Work
- Cleanup / remove filter fallback behaviour by substituting `and_then` with `then` where appropriate.
- Add regression tests for HTTP API error messages.
## Credits
- @mooori for doing the ground work of investigating possible solutions within the existing Rust ecosystem.
- @michaelsproul for writing [`serde_array_query`](https://github.com/sigp/serde_array_query) and for helping debug the behaviour of the `warp` filter fallback leading to incorrect error messages.
## Proposed Changes
Restore compatibility with beacon nodes using the `MERGE` naming by:
1. Adding defaults for the Bellatrix `Config` fields
2. Not attempting to read (or serve) the Bellatrix preset on `/config/spec`.
I've confirmed that this works with Infura, and just logs a warning:
```
Jan 20 10:51:31.078 INFO Connected to beacon node endpoint: https://eth2-beacon-mainnet.infura.io/, version: teku/v22.1.0/linux-x86_64/-eclipseadoptium-openjdk64bitservervm-java-17
Jan 20 10:51:31.344 WARN Beacon node config does not match exactly, advice: check that the BN is updated and configured for any upcoming forks, endpoint: https://eth2-beacon-mainnet.infura.io/
Jan 20 10:51:31.344 INFO Initialized beacon node connections available: 1, total: 1
```
## Proposed Changes
Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.
I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.
Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
## Issue Addressed
NA
## Proposed Changes
Since we use the `rc` (release candidate) tag in our version strings, it seems consistent if we also use "release candidate" in the book rather than "pre-release".
Notably, Github adds a "pre-release" tag to release when we request. I think it's OK that Github uses that term whilst we consistently use "release candidate". Our docs indicate that the terms are interchangeable.
## Additional Info
I hope to use the new docs link in the `v2.1.0` release, so it would be nice if we can merge this soon 🙏
## Issue Addressed
NA
## Proposed Changes
In https://github.com/sigp/lighthouse/pull/2832 we made some changes to the `SnapshotCache` to help deal with the one-block reorgs seen on mainnet (and testnets).
I believe the change in #2832 is good and we should keep it, but I think that in its present form it is causing the `SnapshotCache` to hold onto states that it doesn't need anymore. For example, a skip slot will result in one more `BeaconSnapshot` being stored in the cache.
This PR adds a new type of pruning that happens after a block is inserted to the cache. We will remove any snapshot from the cache that is a *grandparent* of the block being imported. Since we know the grandparent has two valid blocks built atop it, it is not at risk from a one-block re-org.
## Additional Info
NA
## Proposed Changes
Allocate less memory in sync by hashing the `SignedBeaconBlock`s in a batch directly, rather than going via SSZ bytes.
Credit to @paulhauner for finding this source of temporary allocations.
## Issue Addressed
The PeerDB was getting out of sync with the number of disconnected peers compared to the actual count. As this value determines how many we store in our cache, over time the cache was depleting and we were removing peers immediately resulting in errors that manifest as unknown peers for some operations.
The error occurs when dialing a peer fails, we were not correctly updating the peerdb counter because the increment to the counter was placed in the wrong order and was therefore not incrementing the count.
This PR corrects this.
There is a pretty significant tradeoff between bandwidth and speed of gossipsub messages.
We can reduce our bandwidth usage considerably at the cost of minimally delaying gossipsub messages. The impact of delaying messages has not been analyzed thoroughly yet, however this PR in conjunction with some gossipsub updates show considerable bandwidth reduction.
This PR allows the user to set a CLI value (`network-load`) which is an integer in the range of 1 of 5 depending on their bandwidth appetite. 1 represents the least bandwidth but slowest message recieving and 5 represents the most bandwidth and fastest received message time.
For low-bandwidth users it is likely to be more efficient to use a lower value. The default is set to 3, which currently represents a reduced bandwidth usage compared to previous version of this PR. The previous lighthouse versions are equivalent to setting the `network-load` CLI to 4.
This PR is awaiting a few gossipsub updates before we can get it into lighthouse.
## Issue Addressed
https://github.com/sigp/lighthouse/issues/2889
## Additional Info
I have checked that linkcheck has succeeded on the book built locally. 👌
```shell
$ cd book
$ mdbook serve --open
...
2022-01-14 01:13:40 [INFO] (mdbook::book): Book building has started
2022-01-14 01:13:40 [INFO] (mdbook::book): Running the html backend
$ linkcheck http://localhost:3000
Perfect. Checked 4495 links, 80 destination URLs (76 ignored).
```
Also I'll tackle running linkcheck on CI in another pull request.
## Issue Addressed
- Resolves https://github.com/sigp/lighthouse/issues/2902
## Proposed Changes
As documented in https://github.com/sigp/lighthouse/issues/2902, there are some cases where we will score peers very harshly for sending attestations to an unknown head.
This PR removes the penalty when an attestation for an unknown head is received, queued for block look-up, then popped from the queue without the head block being known. This prevents peers from being penalized for an unknown block when that peer was never actually asked for the block.
Peer penalties should still be applied to the peers who *do* get the request for the block and fail to respond with a valid block. As such, peers who send us attestations to non-existent heads should eventually be booted.
## Additional Info
- [ ] Need to confirm that a timeout for a bbroot request will incur a penalty.
## Issue Addressed
Automates a build and push to antithesis servers on merges to unstable. They run tests against lighthouse daily and have requested more frequent pushes. Currently we are just manually pushing stable images when we have a new release.
## Proposed Changes
- Add a `Dockerfile.libvoidstar`
- Add the `libvoidstar.so` binary
- Add a new workflow to autmatically build and push on merges to unstable
## Additional Info
Requires adding the following secrets
-`ANTITHESIS_USERNAME`
-`ANTITHESIS_PASSWORD`
-`ANTITHESIS_REPOSITORY`
-`ANTITHESIS_SERVER`
Tested here: https://github.com/realbigsean/lighthouse/actions/runs/1612821446
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
We have observed occasions were under-resourced nodes will receive messages that were valid *at the time*, but later become invalidated due to long waits for a `BeaconProcessor` worker.
In this PR, we will check to see if the message was valid *at the time of receipt*. If it was initially valid but invalid now, we just ignore the message without penalizing the peer.
## Additional Info
NA
## Issue Addressed
Restore compatibility between Lighthouse v2.0.1 VC and `unstable` BN in preparation for the next release.
## Proposed Changes
* Don't serialize the `PROPOSER_SCORE_BOOST` as `null` because it breaks the `extra_fields: HashMap<String, String>` used by the v2.0.1 VC.
## Issue Addressed
NA
## Proposed Changes
I've observed some Prater nodes (and potentially some mainnet nodes) banning peers due to validator pubkey cache lock timeouts. For the `BeaconChainError`-type of errors, they're caused by internal faults and we can't necessarily tell if the peer is bad or not. I think this is causing us to ban peers unnecessarily when running on under-resourced machines.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Introduces a cache to attestation to produce atop blocks which will become the head, but are not fully imported (e.g., not inserted into the database).
Whilst attesting to a block before it's imported is rather easy, if we're going to produce that attestation then we also need to be able to:
1. Verify that attestation.
1. Respond to RPC requests for the `beacon_block_root`.
Attestation verification (1) is *partially* covered. Since we prime the shuffling cache before we insert the block into the early attester cache, we should be fine for all typical use-cases. However, it is possible that the cache is washed out before we've managed to insert the state into the database and then attestation verification will fail with a "missing beacon state"-type error.
Providing the block via RPC (2) is also partially covered, since we'll check the database *and* the early attester cache when responding a blocks-by-root request. However, we'll still omit the block from blocks-by-range requests (until the block lands in the DB). I *think* this is fine, since there's no guarantee that we return all blocks for those responses.
Another important consideration is whether or not the *parent* of the early attester block is available in the databse. If it were not, we might fail to respond to blocks-by-root request that are iterating backwards to collect a chain of blocks. I argue that *we will always have the parent of the early attester block in the database.* This is because we are holding the fork-choice write-lock when inserting the block into the early attester cache and we do not drop that until the block is in the database.
## Issue Addressed
The current `lcli` block packing code has an off-by-one where it would include an extra slot (the oldest slot) of attestations as "available" (this means there would be 33 slots of "available" attestations instead of 32).
There is typically only single-digit attestations remaining from that slot and as such does not cause a significant change to the results although every efficiency will have been very slightly under-reported.
## Proposed Changes
Prune the `available_attestation_set` before writing out the data instead of after.
## Additional Info
This `lcli` code will soon be deprecated by a Lighthouse API (#2879) which will run significantly faster and will be used to hook into our upcoming monitoring platform #2873.
## Issue Addressed
The fee-recipient argument of the beacon node does not allow a value to be specified:
> $ lighthouse beacon_node --merge --fee-recipient "0x332E43696A505EF45b9319973785F837ce5267b9"
> error: Found argument '0x332E43696A505EF45b9319973785F837ce5267b9' which wasn't expected, or isn't valid in this context
>
> USAGE:
> lighthouse beacon_node --fee-recipient --merge
>
> For more information try --help
## Proposed Changes
Allow specifying a value for the fee-recipient argument in beacon_node/src/cli.rs
## Additional Info
I've added .takes_value(true) and successfully proposed a block in the kintsugi testnet with my own fee-recipient address instead of the hardcoded default. I think that was just missed as the argument does not make sense without a value :)
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Ensures full roots are printed, rather than shortened versions like `0x935b…d376`.
For example, it would be nice if we could do API queries based upon the roots shown in the `Beacon chain re-org` event:
```
Jan 05 12:36:52.224 WARN Beacon chain re-org reorg_distance: 2, new_slot: 2073184, new_head: 0x8a97…2dec, new_head_parent: 0xa985…7688, previous_slot: 2073183, previous_head: 0x935b…d376, service: beacon
Jan 05 13:35:05.832 WARN Beacon chain re-org reorg_distance: 1, new_slot: 2073475, new_head: 0x9207…c6b9, new_head_parent: 0xb2ce…839b, previous_slot: 2073474, previous_head: 0x8066…92f7, service: beacon
```
## Additional Info
We should eventually fix this project-wide, however this is a short-term patch.
## Proposed Changes
Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).
The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
## Issue Addressed
There was an overeager assert in the import of slashing protection data here:
fff01b24dd/validator_client/slashing_protection/src/slashing_database.rs (L939)
We were asserting that if the import contained any blocks for a validator, then the database should contain only a single block for that validator due to pruning/consolidation. However, we would only prune if the import contained _relevant blocks_ (that would actually change the maximum slot):
fff01b24dd/validator_client/slashing_protection/src/slashing_database.rs (L629-L633)
This lead to spurious failures (in the form of `ConsistencyError`s) when importing an interchange containing no new blocks for any of the validators. This wasn't hard to trigger, e.g. export and then immediately re-import the same file.
## Proposed Changes
This PR fixes the issue by simplifying the import so that it's more like the import for attestations. I.e. we make the assert true by always pruning when the imported file contains blocks.
In practice this doesn't have any downsides: if we import a new block then the behaviour is as before, except that we drop the `signing_root`. If we import an existing block or an old block then we prune the database to a single block. The only time this would be relevant is during extreme clock drift locally _plus_ import of a non-drifted interchange, which should occur infrequently.
## Additional Info
I've also added `Arbitrary` implementations to the slashing protection types so that we can fuzz them. I have a fuzzer sitting in a separate directory which I may or may not commit in a subsequent PR.
There's a new test in the standard interchange tests v5.2.1 that checks for this issue: https://github.com/eth-clients/slashing-protection-interchange-tests/pull/12
