## Issue Addressed
Closes#800Closes#1713
## Proposed Changes
Implement the temporary state storage algorithm described in #800. Specifically:
* Add `DBColumn::BeaconStateTemporary`, for storing 0-length temporary marker values.
* Store intermediate states immediately as they are created, marked temporary. Delete the temporary flag if the block is processed successfully.
* Add a garbage collection process to delete leftover temporary states on start-up.
* Bump the database schema version to 2 so that a DB with temporary states can't accidentally be used with older versions of the software. The auto-migration is a no-op, but puts in place some infra that we can use for future migrations (e.g. #1784)
## Additional Info
There are two known race conditions, one potentially causing permanent faults (hopefully rare), and the other insignificant.
### Race 1: Permanent state marked temporary
EDIT: this has been fixed by the addition of a lock around the relevant critical section
There are 2 threads that are trying to store 2 different blocks that share some intermediate states (e.g. they both skip some slots from the current head). Consider this sequence of events:
1. Thread 1 checks if state `s` already exists, and seeing that it doesn't, prepares an atomic commit of `(s, s_temporary_flag)`.
2. Thread 2 does the same, but also gets as far as committing the state txn, finishing the processing of its block, and _deleting_ the temporary flag.
3. Thread 1 is (finally) scheduled again, and marks `s` as temporary with its transaction.
4.
a) The process is killed, or thread 1's block fails verification and the temp flag is not deleted. This is a permanent failure! Any attempt to load state `s` will fail... hope it isn't on the main chain! Alternatively (4b) happens...
b) Thread 1 finishes, and re-deletes the temporary flag. In this case the failure is transient, state `s` will disappear temporarily, but will come back once thread 1 finishes running.
I _hope_ that steps 1-3 only happen very rarely, and 4a even more rarely. It's hard to know
This once again begs the question of why we're using LevelDB (#483), when it clearly doesn't care about atomicity! A ham-fisted fix would be to wrap the hot and cold DBs in locks, which would bring us closer to how other DBs handle read-write transactions. E.g. [LMDB only allows one R/W transaction at a time](https://docs.rs/lmdb/0.8.0/lmdb/struct.Environment.html#method.begin_rw_txn).
### Race 2: Temporary state returned from `get_state`
I don't think this race really matters, but in `load_hot_state`, if another thread stores a state between when we call `load_state_temporary_flag` and when we call `load_hot_state_summary`, then we could end up returning that state even though it's only a temporary state. I can't think of any case where this would be relevant, and I suspect if it did come up, it would be safe/recoverable (having data is safer than _not_ having data).
This could be fixed by using a LevelDB read snapshot, but that would require substantial changes to how we read all our values, so I don't think it's worth it right now.
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
Closes#1557
## Proposed Changes
Modify the pruning algorithm so that it mutates the head-tracker _before_ committing the database transaction to disk, and _only if_ all the heads to be removed are still present in the head-tracker (i.e. no concurrent mutations).
In the process of writing and testing this I also had to make a few other changes:
* Use internal mutability for all `BeaconChainHarness` functions (namely the RNG and the graffiti), in order to enable parallel calls (see testing section below).
* Disable logging in harness tests unless the `test_logger` feature is turned on
And chose to make some clean-ups:
* Delete the `NullMigrator`
* Remove type-based configuration for the migrator in favour of runtime config (simpler, less duplicated code)
* Use the non-blocking migrator unless the blocking migrator is required. In the store tests we need the blocking migrator because some tests make asserts about the state of the DB after the migration has run.
* Rename `validators_keypairs` -> `validator_keypairs` in the `BeaconChainHarness`
## Testing
To confirm that the fix worked, I wrote a test using [Hiatus](https://crates.io/crates/hiatus), which can be found here:
https://github.com/michaelsproul/lighthouse/tree/hiatus-issue-1557
That test can't be merged because it inserts random breakpoints everywhere, but if you check out that branch you can run the test with:
```
$ cd beacon_node/beacon_chain
$ cargo test --release --test parallel_tests --features test_logger
```
It should pass, and the log output should show:
```
WARN Pruning deferred because of a concurrent mutation, message: this is expected only very rarely!
```
## Additional Info
This is a backwards-compatible change with no impact on consensus.
* Initial rebase
* Remove old code
* Correct release tests
* Rebase commit
* Remove eth2-testnet dep on eth2libp2p
* Remove crates lost in rebase
* Remove unused dep
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
This commit was edited by Paul H when rebasing from master to
v0.3.0-staging.
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#673
## Proposed Changes
Store a schema version in the database so that future releases can check they're running against a compatible database version. This would also enable automatic migration on breaking database changes, but that's left as future work.
The database config is also stored in the database so that the `slots_per_restore_point` value can be checked for consistency, which closes#673
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1313
## Proposed Changes
Changes the way we start the validator client and beacon node to ensure that we cleanly drop the validator keystores (which therefore ensures we cleanup their lockfiles).
Previously we were holding the validator keystores in a tokio task that was being forcefully killed (i.e., without `Drop`). Now, we hold them in a task that can gracefully handle a shutdown.
Also, switches the `--strict-lockfiles` flag to `--delete-lockfiles`. This means two things:
1. We are now strict on lockfiles by default (before we weren't).
1. There's a simple way for people delete the lockfiles if they experience a crash.
## Additional Info
I've only given the option to ignore *and* delete lockfiles, not just ignore them. I can't see a strong need for ignore-only but could easily add it, if the need arises.
I've flagged this as `api-breaking` since users that have lockfiles lingering around will be required to supply `--delete-lockfiles` next time they run.
## Issue Addressed
Closes#1472
## Proposed Changes
Add `--staking` ~~and`staking-with-eth1-endpoint`~~ flag to improve UX for stakers.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Fixes#1509
## Proposed Changes
Exit the beacon node if the eth1 endpoint points to an invalid eth1 network. Check the network id before every eth1 cache update and display an error log if the network id has changed to an invalid one.
## Issue Addressed
#1378
## Proposed Changes
Boot node reuses code from beacon_node to initialize network config. This also enables using the network directory to store/load the enr and the private key.
## Additional Info
Note that before this PR the port cli arguments were off (the argument was named `enr-port` but used as `boot-node-enr-port`).
Therefore as port always the cli port argument was used (for both enr and listening). Now the enr-port argument can be used to overwrite the listening port as the public port others should connect to.
Last but not least note, that this restructuring reuses `ethlibp2p::NetworkConfig` that has many more options than the ones used in the boot node. For example the network config has an own `discv5_config` field that gets never used in the boot node and instead another `Discv5Config` gets created later in the boot node process.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
Sets the default max skips to 700 so that it can cover the 693 slot skip from `80894 - 80201`.
## Additional Info
NA
## Proposed Changes
To mitigate the impact of minority forks on RAM and disk usage, this change rejects blocks whose parent lies more than 320 slots (10 epochs, ~1 hour) in the past. The behaviour is configurable via `lighthouse bn --max-skip-slots N`, and can be turned off entirely using `--max-skip-slots none`.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#1384
Only catch, as currently implemented, when dialing the multiaddr nodes, there is no way to ask the peer manager if they are already connected or dialing
## Issue Addressed
NA
## Proposed Changes
- Moves the git-based versioning we were doing into the `lighthouse_version` crate in `common`.
- Removes the `beacon_node/version` crate, replacing it with `lighthouse_version`.
- Bumps the version to `v0.2.0`.
## Additional Info
There are now two types of version string:
1. `const VERSION: &str = Lighthouse/v0.2.0-1419501f2+`
1. `version_with_platform() = Lighthouse/v0.2.0-1419501f2+/x86_64-linux`
(1) is handy cause it's a `const` and shorter. (2) has platform info so it's more useful. Note that the plus-sign (`+`) indicates the the git commit is dirty (it used to be `(modified)` but I had to shorten it to fit into graffiti).
These version strings are now included on:
- `lighthouse --version`
- `lcli --version`
- `curl localhost:5052/node/version`
- p2p messages when we communicate our version
You can update the version by changing this constant (version is not related to a `Cargo.toml`):
b9ad7102d5/common/lighthouse_version/src/lib.rs (L4-L15)
## Issue Addressed
NA
## Proposed Changes
Allows for multiple "hardcoded" testnets.
## Additional Info
This PR is incomplete.
## TODO
- [x] Add flag to CLI, integrate with rest of Lighthouse.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
https://github.com/sigp/lighthouse/issues/1177
## Proposed Changes
Add a command line option (`--http-allow-origin`) and a config item for configuring the `Access-Control-Allow-Origin` response header. This should unblock making XMLHttpRequests.
## Issue Addressed
Closes#1319
## Proposed Changes
This issue:
1. Allows users to edit their Graffiti via the cli option `--graffiti`. If the graffiti is too long, lighthouse will not start and throw an error message. Otherwise, it will set the Graffiti to be the one provided by the user, right-padded with 0s.
2. Create a new `Graffiti` type and unify the code around it. With this type, everything is enforced at compile-time, and the code can be (I think...) panic-free! :)
## Additional info
Currently, only `&str` are supported, as this is the returned type by `.arg("graffiti")`.
Since this is user-input, I tried being as careful as I could. This is also why I created the `Graffiti` type, to make sure I could check as much as possible at compile time.
* Layer do_atomically() abstractions properly
* Reduce allocs and DRY get_key_for_col()
* Parameterize HotColdDB with hot and cold item stores
* -impl Store for MemoryStore
* Replace Store uses with HotColdDB
* Ditch Store trait
* cargo fmt
* Style fix
* Readd missing dep that broke the build
* Add logging on shutdown
* Replace tokio::spawn with handle.spawn
* Upgrade tokio
* Add a task executor
* Beacon chain tasks use task executor
* Validator client tasks use task executor
* Rename runtime_handle to executor
* Add duration histograms; minor fixes
* Cleanup
* Fix logs
* Fix tests
* Remove random file
* Get enr dependency instead of libp2p
* Address some review comments
* Libp2p takes a TaskExecutor
* Ugly fix libp2p tests
* Move TaskExecutor to own file
* Upgrade Dockerfile rust version
* Minor fixes
* Revert "Ugly fix libp2p tests"
This reverts commit 58d4bb690f52de28d893943b7504d2d0c6621429.
* Pretty fix libp2p tests
* Add spawn_without_exit; change Counter to Gauge
* Tidy
* Move log from RuntimeContext to TaskExecutor
* Fix errors
* Replace histogram with int_gauge for async tasks
* Fix todo
* Fix memory leak in test by exiting all spawned tasks at the end
* Update state processing for v0.12
* Fix EF test runners for v0.12
* Fix some tests
* Fix broken attestation verification test
* More test fixes
* Fix typo found in review
* Remove redundant method
* Pull out a method out of a struct
* More precise db access abstractions
* Move fake trait method out of it
* cargo fmt
* Fix compilation error after refactoring
* Move another fake method out the Store trait
* Get rid of superfluous method
* Fix refactoring bug
* Rename: SimpleStoreItem -> StoreItem
* Get rid of the confusing DiskStore type alias
* Get rid of SimpleDiskStore type alias
* Correction: A method took both self and a ref to Self
* Port eth1 lib to use stable futures
* Port eth1_test_rig to stable futures
* Port eth1 tests to stable futures
* Port genesis service to stable futures
* Port genesis tests to stable futures
* Port beacon_chain to stable futures
* Port lcli to stable futures
* Fix eth1_test_rig (#1014)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Update hashmap hashset to stable futures
* Adds panic test to hashset delay
* Port remote_beacon_node to stable futures
* Fix lcli merge conflicts
* Non rpc stuff compiles
* protocol.rs compiles
* Port websockets, timer and notifier to stable futures (#1035)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Port remote_beacon_node to stable futures
* Partial eth2-libp2p stable future upgrade
* Finished first round of fighting RPC types
* Further progress towards porting eth2-libp2p adds caching to discovery
* Update behaviour
* RPC handler to stable futures
* Update RPC to master libp2p
* Network service additions
* Fix the fallback transport construction (#1102)
* Correct warning
* Remove hashmap delay
* Compiling version of eth2-libp2p
* Update all crates versions
* Fix conversion function and add tests (#1113)
* Port validator_client to stable futures (#1114)
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Revert "Update hashmap hashset to stable futures"
This reverts commit d432378a3cc5cd67fc29c0b15b96b886c1323554.
* Revert "Adds panic test to hashset delay"
This reverts commit 281502396fc5b90d9c421a309c2c056982c9525b.
* Ported attestation_service
* Ported duties_service
* Ported fork_service
* More ports
* Port block_service
* Minor fixes
* VC compiles
* Update TODOS
* Borrow self where possible
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Re-Fix attestation and duties service
* Minor fixes
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Network crate update to stable futures
* Port account_manager to stable futures (#1121)
* Port account_manager to stable futures
* Run async fns in tokio environment
* Port rest_api crate to stable futures (#1118)
* Port rest_api lib to stable futures
* Reduce tokio features
* Update notifier to stable futures
* Builder update
* Further updates
* Convert self referential async functions
* stable futures fixes (#1124)
* Fix eth1 update functions
* Fix genesis and client
* Fix beacon node lib
* Return appropriate runtimes from environment
* Fix test rig
* Refactor eth1 service update
* Upgrade simulator to stable futures
* Lighthouse compiles on stable futures
* Remove println debugging statement
* Update libp2p service, start rpc test upgrade
* Update network crate for new libp2p
* Update tokio::codec to futures_codec (#1128)
* Further work towards RPC corrections
* Correct http timeout and network service select
* Use tokio runtime for libp2p
* Revert "Update tokio::codec to futures_codec (#1128)"
This reverts commit e57aea924acf5cbabdcea18895ac07e38a425ed7.
* Upgrade RPC libp2p tests
* Upgrade secio fallback test
* Upgrade gossipsub examples
* Clean up RPC protocol
* Test fixes (#1133)
* Correct websocket timeout and run on os thread
* Fix network test
* Clean up PR
* Correct tokio tcp move attestation service tests
* Upgrade attestation service tests
* Correct network test
* Correct genesis test
* Test corrections
* Log info when block is received
* Modify logs and update attester service events
* Stable futures: fixes to vc, eth1 and account manager (#1142)
* Add local testnet scripts
* Remove whiteblock script
* Rename local testnet script
* Move spawns onto handle
* Fix VC panic
* Initial fix to block production issue
* Tidy block producer fix
* Tidy further
* Add local testnet clean script
* Run cargo fmt
* Tidy duties service
* Tidy fork service
* Tidy ForkService
* Tidy AttestationService
* Tidy notifier
* Ensure await is not suppressed in eth1
* Ensure await is not suppressed in account_manager
* Use .ok() instead of .unwrap_or(())
* RPC decoding test for proto
* Update discv5 and eth2-libp2p deps
* Fix lcli double runtime issue (#1144)
* Handle stream termination and dialing peer errors
* Correct peer_info variant types
* Remove unnecessary warnings
* Handle subnet unsubscription removal and improve logigng
* Add logs around ping
* Upgrade discv5 and improve logging
* Handle peer connection status for multiple connections
* Improve network service logging
* Improve logging around peer manager
* Upgrade swarm poll centralise peer management
* Identify clients on error
* Fix `remove_peer` in sync (#1150)
* remove_peer removes from all chains
* Remove logs
* Fix early return from loop
* Improved logging, fix panic
* Partially correct tests
* Stable futures: Vc sync (#1149)
* Improve syncing heuristic
* Add comments
* Use safer method for tolerance
* Fix tests
* Stable futures: Fix VC bug, update agg pool, add more metrics (#1151)
* Expose epoch processing summary
* Expose participation metrics to prometheus
* Switch to f64
* Reduce precision
* Change precision
* Expose observed attesters metrics
* Add metrics for agg/unagg attn counts
* Add metrics for gossip rx
* Add metrics for gossip tx
* Adds ignored attns to prom
* Add attestation timing
* Add timer for aggregation pool sig agg
* Add write lock timer for agg pool
* Add more metrics to agg pool
* Change map lock code
* Add extra metric to agg pool
* Change lock handling in agg pool
* Change .write() to .read()
* Add another agg pool timer
* Fix for is_aggregator
* Fix pruning bug
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add cli flag and parse dns address
* Fail if enr udp port isn't set
* Improve docs and address parsing
* address review comments
* Remove debug statements
* Add requires condition for enr-address
* Return address in error
* Address compiler warning
* Prune abandoned fork choice forks
* New approach to pruning
* Wrap some block hashes in a newtype pattern
For increased type safety.
* Add Graphviz chain dump emitter for debugging
* Fix broken test case
* Make prunes_abandoned_forks use real DiskStore
* Mark finalized blocks in the GraphViz output
* Refine debug stringification of Slot and Epoch
Before this commit: print!("{:?}", Slot(123)) == "Slot(\n123\n)".
After this commit: print!("{:?", Slot(123)) == "Slot(123)".
* Simplify build_block()
* Rewrite test case using more composable test primitives
* Working rewritten test case
* Tighten fork prunning test checks
* Add another pruning test case
* Bugfix: Finalized blocks weren't always properly detected
* Pruning: Add pruning_does_not_touch_blocks_prior_to_finalization test case
* Tighten pruning tests: check if heads are tracked properly
* Add a failing test case for a buggy scenario
* Change name of function to a more accurate one
* Fix failing test case
* Test case: Were skipped slots' states pruned?
* Style fix: Simplify dereferencing
* Tighten pruning tests: check if abandoned states are deleted
* Towards atomicity of db ops
* Correct typo
* Prune also skipped slots' states
* New logic for handling skipped states
* Make skipped slots test pass
* Post conflict resolution fixes
* Formatting fixes
* Tests passing
* Block hashes in Graphviz node labels
* Removed unused changes
* Fix bug with states having < SlotsPerHistoricalRoot roots
* Consolidate State/BlockRootsIterator for pruning
* Address review feedback
* Fix a bug in pruning tests
* Detach prune_abandoned_forks() from its object
* Move migrate.rs from store to beacon_chain
* Move forks pruning onto a background thread
* Bugfix: Heads weren't pruned when prune set contained only the head
* Rename: freeze_to_state() -> process_finalization()
* Eliminate redundant function parameter
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* Move the codes that loads Eth2Config from config to environment
* Move the codes that setups Eth2Config for testnet
* Move the codes that creates a new ChainSpec
* Remove unused `mut`
* Reduce local variable number
* Remove unused outputs of config::get_configs()
* Change the method name from plural to singular
* DRY the const `ETH2_CONFIG_FILENAME`
* Add comments
* Remove unnecessary blank line
* cargo fmt
* Add tests for EnvironmentBuilder::setup_eth2_config()
* Remove the comment that have been fixed
* Reduce local variable
* Remove redundant local variable
* Remove prysm-specific codes
Now the spec is in the eth2-testnets repo
* Merge #913
* Correct release tests
* Completed release test corrections
* Initial work on upgrading discovery
* Updates discovery to latest version
* Update ENR initialisation logic
* Remove debug statements
* Shifts timing units to slots
* Initial work
* Add initial fork versioning and EnrForkId
* Correct linking for EnrForkId
* Adds eth2 field to local ENR
* Initial work to eth2 field integration
* Integrate eth2 field into discovery
* temp commit
* Add a timer to adjust fork versions during a hard fork for the ENR
* Remove ping protocol
* Initial renaming of network services
* Correct rebasing relative to latest master
* Start updating types
* Adds HashMapDelay struct to utils
* Initial network restructure
* Network restructure. Adds new types for v0.2.0
* Removes build artefacts
* Shift validation to beacon chain
* Temporarily remove gossip validation
This is to be updated to match current optimisation efforts.
* Adds AggregateAndProof
* Begin rebuilding pubsub encoding/decoding
* Signature hacking
* Shift gossipsup decoding into eth2_libp2p
* Existing EF tests passing with fake_crypto
* Shifts block encoding/decoding into RPC
* Delete outdated API spec
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Fast aggregate verify test
* Update REST API docs
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Progress on attestation service
* Address review comments; remove unused dependency
* Initial work on removing libp2p lock
* Add LRU caches to store (rollup)
* Update attestation validation for DB changes (WIP)
* Initial version of should_forward_block
* Scaffold
* Progress on attestation validation
Also, consolidate prod+testing slot clocks so that they share much
of the same implementation and can both handle sub-slot time changes.
* Removes lock from libp2p service
* Completed network lock removal
* Finish(?) attestation processing
* Correct network termination future
* Add slot check to block check
* Correct fmt issues
* Remove Drop implementation for network service
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Address reviewers suggestions
* Disable/delete two outdated tests
* Modification of validator for subscriptions
* Add slot signing to validator client
* Further progress on validation subscription
* Adds necessary validator subscription functionality
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Clean up validator <-> beacon node http types
* Add aggregator status to ValidatorDuty
* Impl Clone for manual slot clock
* Fix minor errors
* Further progress validator client subscription
* Initial subscription and aggregation handling
* Remove decompressed member from pubkey bytes
* Progress to modifying val client for attestation aggregation
* First draft of validator client upgrade for aggregate attestations
* Add hashmap for indices lookup
* Add state cache, remove store cache
* Only build the head committee cache
* Removes lock on a network channel
* Partially implement beacon node subscription http api
* Correct compilation issues
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Partial implementation of timer
* Adds timer, removes exit_future, http api to op pool
* Partial multiple aggregate attestation handling
* Permits bulk messages accross gossipsub network channel
* Correct compile issues
* Improve gosispsub messaging and correct rest api helpers
* Added global gossipsub subscriptions
* Update validator subscriptions data structs
* Tidy
* Re-structure validator subscriptions
* Initial handling of subscriptions
* Re-structure network service
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add HashSetDelay and introduce into attestation service
* Handles validator subscriptions
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Peer subnet discovery gets queued for future subscriptions
* Reorganise attestation service functions
* Initial wiring of attestation service
* First draft of attestation service timing logic
* Correct minor typos
* Tidy
* Fix todos
* Improve tests
* Add PeerInfo to connected peers mapping
* Fix compile error
* Fix compile error from merge
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Rename state_cache -> checkpoint_cache
* Rename Checkpoint -> Snapshot
* Tidy, add comments
* Tidy up find_head function
* Change some checkpoint -> snapshot
* Add tests
* Expose max_len
* Remove dead code
* Tidy
* Fix bug
* Add sync-speed metric
* Add first attempt at VerifiableBlock
* Start integrating into beacon chain
* Integrate VerifiableBlock
* Rename VerifableBlock -> PartialBlockVerification
* Add start of typed methods
* Add progress
* Add further progress
* Rename structs
* Add full block verification to block_processing.rs
* Further beacon chain integration
* Update checks for gossip
* Add todo
* Start adding segement verification
* Add passing chain segement test
* Initial integration with batch sync
* Minor changes
* Tidy, add more error checking
* Start adding chain_segment tests
* Finish invalid signature tests
* Include single and gossip verified blocks in tests
* Add gossip verification tests
* Start adding docs
* Finish adding comments to block_processing.rs
* Rename block_processing.rs -> block_verification
* Start removing old block processing code
* Fixes beacon_chain compilation
* Fix project-wide compile errors
* Remove old code
* Correct code to pass all tests
* Fix bug with beacon proposer index
* Fix shim for BlockProcessingError
* Only process one epoch at a time
* Fix loop in chain segment processing
* Correct tests from master merge
* Add caching for state.eth1_data_votes
* Add BeaconChain::validator_pubkey
* Revert "Add caching for state.eth1_data_votes"
This reverts commit cd73dcd6434fb8d8e6bf30c5356355598ea7b78e.
Co-authored-by: Grant Wuerker <gwuerker@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Disable/delete two outdated tests
* Tidy
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Tidy
* Fix todos
* Add attestation processing tests
* Add another test
* Only run attestation tests in release
* Make attestation tests MainnetEthSpec
* Address Michael's comments
* Remove redundant check
* Fix warning
* Fix failing test
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Disable/delete two outdated tests
* Bump eth1 default vote warn to error
* Delete outdated eth1 test
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Add LRU caches to store
* Improvements to LRU caches
* Take state by value in `Store::put_state`
* Store blocks by value, configurable cache sizes
* Use a StateBatch to efficiently store skip states
* Fix store tests
* Add CloneConfig test, remove unused metrics
* Use Mutexes instead of RwLocks for LRU caches
* Start adding interop genesis state to lcli
* Use more efficient method to generate genesis state
* Remove duplicate int_to_bytes32
* Add lcli command to change state genesis time
* Add option to allow VC to start with unsynced BN
* Set VC to do parallel key loading
* Don't default to dummy eth1 backend
* Add endpoint to dump operation pool
* Add metrics for op pool
* Remove state clone for slot notifier
* Add mem size approximation for tree hash cache
* Avoid cloning tree hash when getting head
* Fix failing API tests
* Address Michael's comments
* Add HashMap::from_par_iter
This should reduce disk usage by 32x while keeping historical state queries to
less than 10s. If historical states are required quickly, the minimum SPRP of 32
can be set on the CLI.
* Set random port when zero-port option is set
* Remove logic allowing lighthouse to update its own ENR
* Discovery address is set to localhost by default
* Return error if discovery-addr isn't explicit
* Add first draft of validator onboarding
* Update docs
* Add documentation link to main README
* Continue docs development
* Update book readme
* Update docs
* Allow vc to run without testnet subcommand
* Small change to onboarding docs
* Tidy CLI help messages
* Update docs
* Add check to val client see if beacon node is synced
* Add notifier service to validator client
* Re-order onboarding steps
* Update deposit contract address
* Update testnet dir
* Add note about public eth1 node
* Set default eth1 endpoint to sigp
* Fix broken test
* Try fix eth1 cache locking
* Be more specific about eth1 endpoint
* Increase gas limit for deposit
* Fix default deposit amount
* Update lcli to parse spec at boot, remove pycli
* Fix issues when starting with mainnet spec
* Set default spec to mainnet
* Ensure ETH1_FOLLOW_DISTANCE is in YamlConfig
* Set testnet ETH1_FOLLOW_DISTANCE to 16
* Set testnet min validator count
* Add validator count CLI flag to lcli contract deploy
* Extend genesis delay time
* Squish prev commits into a single atop master
* Enable http and ws during testing
* Checkout clobbered files from master
* Further un-clobber rest_api changes
* Tidy formatting
* Do rust-fmt's job for it :|
* Draft of checkpoint freezer DB
* Fix bugs
* Adjust root iterators for checkpoint database
* Fix freezer state lookups with no slot hint
* Fix split comment
* Use "restore point" to refer to frozen states
* Resolve some FIXMEs
* Configurable slots per restore point
* Document new freezer DB functions
* Fix up StoreConfig
* Fix new test for merge
* Document SPRP default CLI flag, clarify tests
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Add `validator` changes from `validator-to-rest`
* Add initial (failing) REST api tests
* Fix signature parsing
* Add more tests
* Refactor http router
* Add working tests for publish beacon block
* Add validator duties tests
* Move account_manager under `lighthouse` binary
* Unify logfile handling in `environment` crate.
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Add `deposit_contract` crate
* Add progress on validator onboarding
* Add unfinished attesation code
* Update account manager CLI
* Write eth1 data file as hex string
* Integrate ValidatorDirectory with validator_client
* Move ValidatorDirectory into validator_client
* Clean up some FIXMEs
* Add beacon_chain_sim
* Fix a few docs/logs
* Expand `beacon_chain_sim`
* Fix spec for `beacon_chain_sim
* More testing for api
* Start work on attestation endpoint
* Reject empty attestations
* Allow attestations to genesis block
* Add working tests for `rest_api` validator endpoint
* Remove grpc from beacon_node
* Start heavy refactor of validator client
- Block production is working
* Prune old validator client files
* Start works on attestation service
* Add attestation service to validator client
* Use full pubkey for validator directories
* Add validator duties post endpoint
* Use par_iter for keypair generation
* Use bulk duties request in validator client
* Add version http endpoint tests
* Add interop keys and startup wait
* Ensure a prompt exit
* Add duties pruning
* Fix compile error in beacon node tests
* Add github workflow
* Modify rust.yaml
* Modify gitlab actions
* Add to CI file
* Add sudo to CI npm install
* Move cargo fmt to own job in tests
* Fix cargo fmt in CI
* Add rustup update before cargo fmt
* Change name of CI job
* Make other CI jobs require cargo fmt
* Add CI badge
* Remove gitlab and travis files
* Add different http timeout for debug
* Update docker file, use makefile in CI
* Use make in the dockerfile, skip the test
* Use the makefile for debug GI test
* Update book
* Tidy grpc and misc things
* Apply discv5 fixes
* Address other minor issues
* Fix warnings
* Attempt fix for addr parsing
* Tidy validator config, CLIs
* Tidy comments
* Tidy signing, reduce ForkService duplication
* Fail if skipping too many slots
* Set default recent genesis time to 0
* Add custom http timeout to validator
* Fix compile bug in node_test_rig
* Remove old bootstrap flag from val CLI
* Update docs
* Tidy val client
* Change val client log levels
* Add comments, more validity checks
* Fix compile error, add comments
* Undo changes to eth2-libp2p/src
* Reduce duplication of keypair generation
* Add more logging for validator duties
* Fix beacon_chain_sim, nitpicks
* Fix compile error, minor nits
* Update to use v0.9.2 version of deposit contract
* Add efforts to automate eth1 testnet deployment
* Fix lcli testnet deployer
* Modify bn CLI to parse eth2_testnet_dir
* Progress with account_manager deposit tools
* Make account manager submit deposits
* Add password option for submitting deposits
* Allow custom deposit amount
* Add long names to lcli clap
* Add password option to lcli deploy command
* Fix minor bugs whilst testing
* Address Michael's comments
* Add refund-deposit-contract to lcli
* Use time instead of skip count for denying long skips
* Improve logging for eth1
* Fix bug with validator services exiting on error
* Drop the block cache after genesis
* Modify eth1 testnet config
* Improve eth1 logging
* Make validator wait until genesis time
* Fix bug in eth1 voting
* Add more logging to eth1 voting
* Handle errors in eth1 http module
* Set SECONDS_PER_DAY to sensible minimum
* Shorten delay before testnet start
* Ensure eth1 block is produced without any votes
* Improve eth1 logging
* Fix broken tests in eth1
* Tidy code in rest_api
* Fix failing test in deposit_contract
* Make CLI args more consistent
* Change validator/duties endpoint
* Add time-based skip slot limiting
* Add new error type missed in previous commit
* Add log when waiting for genesis
* Refactor beacon node CLI
* Remove unused dep
* Add lcli eth1-genesis command
* Fix bug in master merge
* Apply clippy lints to beacon node
* Add support for YamlConfig in Eth2TestnetDir
* Upgrade tesnet deposit contract version
* Remove unnecessary logging and correct formatting
* Add a hardcoded eth2 testnet config
* Ensure http server flag works. Overwrite configs with flags.
* Ensure boot nodes are loaded from testnet dir
* Fix account manager CLI bugs
* Fix bugs with beacon node cli
* Allow testnet dir without boot nodes
* Write genesis state as SSZ
* Remove ---/n from the start of testnet_dir files
* Set default libp2p address
* Tidy account manager CLI, add logging
* Add check to see if testnet dir exists
* Apply reviewers suggestions
* Add HeadTracker struct
* Add fork choice persistence
* Shorten slot time for simulator
* Add the /beacon/heads API endpoint
* Update hardcoded testnet
* Add tests for BeaconChain persistence + fix bugs
* Extend BeaconChain persistence testing
* Ensure chain is finalized b4 persistence tests
* Ensure boot_enr.yaml is include in binary
* Refactor beacon_chain_sim
* Move files about in beacon sim
* Update beacon_chain_sim
* Fix bug with deposit inclusion
* Increase log in genesis service, fix todo
* Tidy sim, fix broken rest_api tests
* Fix more broken tests
* Update testnet
* Fix broken rest api test
* Tidy account manager CLI
* Use tempdir for account manager
* Stop hardcoded testnet dir from creating dir
* Rename Eth2TestnetDir to Eth2TestnetConfig
* Change hardcoded -> hard_coded
* Tidy account manager
* Add log to account manager
* Tidy, ensure head tracker is loaded from disk
* Tidy beacon chain builder
* Tidy eth1_chain
* Adds log support for simulator
* Revert "Adds log support for simulator"
This reverts commit ec77c66a052350f551db145cf20f213823428dd3.
* Adds log support for simulator
* Tidy after self-review
* Change default log level
* Address Michael's delicious PR comments
* Fix off-by-one in tests
* Create libp2p instance
* Change logger to stdlog
* test_connection initial commit
* Add gossipsub test
* Delete tests in network crate
* Add test module
* Clean tests
* Remove dependency on discovery
* Working publish between 2 nodes
TODO: Publish should be called just once
* Working 2 peer gossipsub test with additional events
* Cleanup test
* Add rpc test
* Star topology discovery WIP
* build_nodes builds and connects n nodes. Increase nodes in gossipsub test
* Add unsubscribe method and expose reference to gossipsub object for gossipsub tests
* Add gossipsub message forwarding test
* Fix gossipsub forward test
* Test improvements
* Remove discovery tests
* Simplify gossipsub forward test topology
* Add helper functions for topology building
* Clean up tests
* Update naming to new network spec
* Correct ssz encoding of protocol names
* Further additions to network upgrade
* Initial network spec update WIP
* Temp commit
* Builds one side of the streamed RPC responses
* Temporary commit
* Propagates streaming changes up into message handler
* Intermediate network update
* Partial update in upgrading to the new network spec
* Update dependencies, remove redundant deps
* Correct sync manager for block stream handling
* Re-write of RPC handler, improves efficiency and corrects bugs
* Stream termination update
* Completed refactor of rpc handler
* Remove crates
* Correct compile issues associated with test merge
* Build basic tests and testing structure for eth2-libp2p
* Enhance RPC tests and add logging
* Complete RPC testing framework and STATUS test
* Decoding bug fixes, log improvements, stream test
* Clean up RPC handler logging
* Decoder bug fix, empty block stream test
* Add BlocksByRoot RPC test
* Add Goodbye RPC test
* Syncing and stream handling bug fixes and performance improvements
* Applies discv5 bug fixes
* Adds DHT IP filtering for lighthouse - currently disabled
* Adds randomized network propagation as a CLI arg
* Add disconnect functionality
* Adds attestation handling and parent lookup
* Adds RPC error handling for the sync manager
* Allow parent's blocks to be already processed
* Update github workflow
* Adds reviewer suggestions
* Implement freezer database for state vectors
* Improve BeaconState safe accessors
And fix a bug in the compact committees accessor.
* Banish dodgy type bounds back to gRPC
* Clean up
* Switch to exclusive end points in chunked vec
* Cleaning up and start of tests
* Randao fix, more tests
* Fix unsightly hack
* Resolve test FIXMEs
* Config file support
* More clean-ups, migrator beginnings
* Finish migrator, integrate into BeaconChain
* Fixups
* Fix store tests
* Fix BeaconChain tests
* Fix LMD GHOST tests
* Address review comments, delete 'static bounds
* Cargo format
* Address review comments
* Fix LMD ghost tests
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Clean up some FIXMEs
* Fix a few docs/logs
* Update for new builder paradigm, spec changes
* Freezer DB integration into BeaconNode
* Cleaning up
* This works, clean it up
* Cleanups
* Fix and improve store tests
* Refine store test
* Delete unused beacon_chain_builder.rs
* Fix CLI
* Store state at split slot in hot database
* Make fork choice lookup fast again
* Store freezer DB split slot in the database
* Handle potential div by 0 in chunked_vector
* Exclude committee caches from freezer DB
* Remove FIXME about long-running test
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Add `validator` changes from `validator-to-rest`
* Add initial (failing) REST api tests
* Fix signature parsing
* Add more tests
* Refactor http router
* Add working tests for publish beacon block
* Add validator duties tests
* Move account_manager under `lighthouse` binary
* Unify logfile handling in `environment` crate.
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Add `deposit_contract` crate
* Add progress on validator onboarding
* Add unfinished attesation code
* Update account manager CLI
* Write eth1 data file as hex string
* Integrate ValidatorDirectory with validator_client
* Move ValidatorDirectory into validator_client
* Clean up some FIXMEs
* Add beacon_chain_sim
* Fix a few docs/logs
* Expand `beacon_chain_sim`
* Fix spec for `beacon_chain_sim
* More testing for api
* Start work on attestation endpoint
* Reject empty attestations
* Allow attestations to genesis block
* Add working tests for `rest_api` validator endpoint
* Remove grpc from beacon_node
* Start heavy refactor of validator client
- Block production is working
* Prune old validator client files
* Start works on attestation service
* Add attestation service to validator client
* Use full pubkey for validator directories
* Add validator duties post endpoint
* Use par_iter for keypair generation
* Use bulk duties request in validator client
* Add version http endpoint tests
* Add interop keys and startup wait
* Ensure a prompt exit
* Add duties pruning
* Fix compile error in beacon node tests
* Add github workflow
* Modify rust.yaml
* Modify gitlab actions
* Add to CI file
* Add sudo to CI npm install
* Move cargo fmt to own job in tests
* Fix cargo fmt in CI
* Add rustup update before cargo fmt
* Change name of CI job
* Make other CI jobs require cargo fmt
* Add CI badge
* Remove gitlab and travis files
* Add different http timeout for debug
* Update docker file, use makefile in CI
* Use make in the dockerfile, skip the test
* Use the makefile for debug GI test
* Update book
* Tidy grpc and misc things
* Apply discv5 fixes
* Address other minor issues
* Fix warnings
* Attempt fix for addr parsing
* Tidy validator config, CLIs
* Tidy comments
* Tidy signing, reduce ForkService duplication
* Fail if skipping too many slots
* Set default recent genesis time to 0
* Add custom http timeout to validator
* Fix compile bug in node_test_rig
* Remove old bootstrap flag from val CLI
* Update docs
* Tidy val client
* Change val client log levels
* Add comments, more validity checks
* Fix compile error, add comments
* Undo changes to eth2-libp2p/src
* Reduce duplication of keypair generation
* Add more logging for validator duties
* Fix beacon_chain_sim, nitpicks
* Fix compile error, minor nits
* Address Michael's comments
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Initial commit. web3 api working.
* Tidied up lib. Add function for fetching logs.
* Refactor with `Eth1DataFetcher` trait
* Add parsing for deposit contract logs and get_eth1_data function
* Add `get_eth1_votes` function
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Fix merge issue
* Refactor with `Config` struct. Remote `ContractConfig`
* Rename eth1_chain crate to eth1
* Rename files and read abi file using `fs::read`
* Move eth1 to lib
* Remove unnecessary mutability constraint
* Add `Web3Backend` for returning actual eth1 data
* Refactor `get_eth1_votes` to return a Result
* Delete `eth1_chain` crate
* Return `Result` from `get_deposits`
* Fix range of deposits to return to beacon chain
* Add `get_block_height_by_hash` trait function
* Add naive method for getting `previous_eth1_distance`
* Add eth1 config params to main config
* Add instructions for setting up eth1 testing environment
* Add build script to fetch deposit contract abi
* Contract ABI is part of compiled binary
* Fix minor bugs
* Move docs to lib
* Add timeout to config
* Remove print statements
* Change warn to error
* Fix typos
* Removed prints in test and get timeout value from config
* Fixed error types
* Added logging to web3_fetcher
* Refactor for modified web3 api
* Fix minor stuff
* Add build script
* Tidy, hide eth1 integration tests behind flag
* Add http crate
* Add first stages of eth1_test_rig
* Fix deposits on test rig
* Fix bug with deposit count method
* Add block hash getter to http eth1
* Clean eth1 http crate and tests
* Add script to start ganache
* Adds deposit tree to eth1-http
* Extend deposit tree tests
* Tidy tests in eth1-http
* Add more detail to get block request
* Add block cache to eth1-http
* Rename deposit tree to deposit cache
* Add inital updating to eth1-http
* Tidy updater
* Fix compile bugs in tests
* Adds an Eth1DataCache builder
* Reorg eth1-http files
* Add (failing) tests for eth1 updater
* Rename files, fix bug in eth1-http
* Ensure that ganache timestamps are increasing
* Fix bugs with getting eth1data ancestors
* Improve eth1 testing, fix bugs
* Add truncate method to block cache
* Add pruning to block cache update process
* Add tests for block pruning
* Allow for dropping an expired cache.
* Add more comments
* Add first compiling version of deposit updater
* Add common fn for getting range of required blocks
* Add passing deposit update test
* Improve tests
* Fix block pruning bug
* Add tests for running two updates at once
* Add updater services to eth1
* Add deposit collection to beacon chain
* Add incomplete builder experiments
* Add first working version of beacon chain builder
* Update test harness to new beacon chain type
* Rename builder file, tidy
* Add first working client builder
* Progress further on client builder
* Update becaon node binary to use client builder
* Ensure release tests compile
* Remove old eth1 crate
* Add first pass of new lighthouse binary
* Fix websocket server startup
* Remove old binary code from beacon_node crate
* Add first working beacon node tests
* Add genesis crate, new eth1 cache_2
* Add Serivce to Eth1Cache
* Refactor with general eth1 improvements
* Add passing genesis test
* Tidy, add comments
* Add more comments to eth1 service
* Add further eth1 progress
* Fix some bugs with genesis
* Fix eth1 bugs, make eth1 linking more efficient
* Shift logic in genesis service
* Add more comments to genesis service
* Add gzip, max request values, timeouts to http
* Update testnet parameters to suit goerli testnet
* Add ability to vary Fork, fix custom spec
* Be more explicit about deposit fork version
* Start adding beacon chain eth1 option
* Add more flexibility to prod client
* Further runtime refactoring
* Allow for starting from store
* Add bootstrapping to client config
* Add remote_beacon_node crate
* Update eth1 service for more configurability
* Update eth1 tests to use less runtimes
* Patch issues with tests using too many files
* Move dummy eth1 backend flag
* Ensure all tests pass
* Add ganache-cli to Dockerfile
* Use a special docker hub image for testing
* Appease clippy
* Move validator client into lighthouse binary
* Allow starting with dummy eth1 backend
* Improve logging
* Fix dummy eth1 backend from cli
* Add extra testnet command
* Ensure consistent spec in beacon node
* Update eth1 rig to work on goerli
* Tidy lcli, start adding support for yaml config
* Add incomplete YamlConfig struct
* Remove efforts at YamlConfig
* Add incomplete eth1 voting. Blocked on spec issues
* Add (untested) first pass at eth1 vote algo
* Add tests for winning vote
* Add more tests for eth1 chain
* Add more eth1 voting tests
* Added more eth1 voting testing
* Change test name
* Add more tests to eth1 chain
* Tidy eth1 generics, add more tests
* Improve comments
* Tidy beacon_node tests
* Tidy, rename JsonRpc.. to Caching..
* Tidy voting logic
* Tidy builder docs
* Add comments, tidy eth1
* Add more comments to eth1
* Fix bug with winning_vote
* Add doc comments to the `ClientBuilder`
* Remove commented-out code
* Improve `ClientBuilder` docs
* Add comments to client config
* Add decoding test for `ClientConfig`
* Remove unused `DepositSet` struct
* Tidy `block_cache`
* Remove commented out lines
* Remove unused code in `eth1` crate
* Remove old validator binary `main.rs`
* Tidy, fix tests compile error
* Add initial tests for get_deposits
* Remove dead code in eth1_test_rig
* Update TestingDepositBuilder
* Add testing for getting eth1 deposits
* Fix duplicate rand dep
* Remove dead code
* Remove accidentally-added files
* Fix comment in eth1_genesis_service
* Add .gitignore for eth1_test_rig
* Fix bug in eth1_genesis_service
* Remove dead code from eth2_config
* Fix tabs/spaces in root Cargo.toml
* Tidy eth1 crate
* Allow for re-use of eth1 service after genesis
* Update docs for new CLI
* Change README gif
* Tidy eth1 http module
* Tidy eth1 service
* Tidy environment crate
* Remove unused file
* Tidy, add comments
* Remove commented-out code
* Address majority of Michael's comments
* Address other PR comments
* Add link to issue alongside TODO
* Change into_iter to iter
* Fix clippy 'easy' warnings
* Clippy eth2/utils
* Add struct NetworkInfo
* Clippy for types, utils, and beacon_node/store/src/iters.rs
* Cargo fmt
* Change foo to my_foo
* Remove complex signature
* suppress clippy warning for unit_value in benches
* Use enumerate instead of iterating over range
* Allow trivially_copy_pass_by_ref in serde_utils
Updates lighthouse to the latest networking spec
- Sync re-write (#496)
- Updates to the latest eth2 networking spec (#495)
- Libp2p updates and improvements
* Renamed fork_choice::process_attestation_from_block
* Processing attestation in fork choice
* Retrieving state from store and checking signature
* Looser check on beacon state validity.
* Cleaned up get_attestation_state
* Expanded fork choice api to provide latest validator message.
* Checking if the an attestation contains a latest message
* Correct process_attestation error handling.
* Copy paste error in comment fixed.
* Tidy ancestor iterators
* Getting attestation slot via helper method
* Refactored attestation creation in test utils
* Revert "Refactored attestation creation in test utils"
This reverts commit 4d277fe4239a7194758b18fb5c00dfe0b8231306.
* Integration tests for free attestation processing
* Implicit conflicts resolved.
* formatting
* Do first pass on Grants code
* Add another attestation processing test
* Tidy attestation processing
* Remove old code fragment
* Add non-compiling half finished changes
* Simplify, fix bugs, add tests for chain iters
* Remove attestation processing from op pool
* Fix bug with fork choice, tidy
* Fix overly restrictive check in fork choice.
* Ensure committee cache is build during attn proc
* Ignore unknown blocks at fork choice
* Various minor fixes
* Make fork choice write lock in to read lock
* Remove unused method
* Tidy comments
* Fix attestation prod. target roots change
* Fix compile error in store iters
* Reject any attestation prior to finalization
* Begin metrics refactor
* Move beacon_chain to new metrics structure.
* Make metrics not panic if already defined
* Use global prometheus gather at rest api
* Unify common metric fns into a crate
* Add heavy metering to block processing
* Remove hypen from prometheus metric name
* Add more beacon chain metrics
* Add beacon chain persistence metric
* Prune op pool on finalization
* Add extra prom beacon chain metrics
* Prefix BeaconChain metrics with "beacon_"
* Add more store metrics
* Add basic metrics to libp2p
* Add metrics to HTTP server
* Remove old `http_server` crate
* Update metrics names to be more like standard
* Fix broken beacon chain metrics, add slot clock metrics
* Add lighthouse_metrics gather fn
* Remove http args
* Fix wrong state given to op pool prune
* Make prom metric names more consistent
* Add more metrics, tidy existing metrics
* Fix store block read metrics
* Tidy attestation metrics
* Fix minor PR comments
* Fix minor PR comments
* Remove duplicated attestation finalization check
* Remove awkward `let` statement
* Add first attempts at HTTP bootstrap
* Add beacon_block methods to rest api
* Fix serde for block.body.grafitti
* Allow travis failures on beta (see desc)
There's a non-backward compatible change in `cargo fmt`. Stable and beta
do not agree.
* Add network routes to API
* Fix rustc warnings
* Add best_slot method
* Add --bootstrap arg to beacon node
* Get bootstrapper working for ENR address
* Store intermediate states during block processing
* Allow bootstrapper to scrape libp2p address
* Update bootstrapper libp2p address finding
* Add comments
* Tidy API to be more consistent with recent decisions
* Address some review comments
* Make BeaconChainTypes Send + Sync + 'static
* Add `/network/listen_port` API endpoint
* Abandon starting the node if libp2p doesn't start
* Update bootstrapper for API changes
* Remove unnecessary trait bounds
* Renamed fork_choice::process_attestation_from_block
* Processing attestation in fork choice
* Retrieving state from store and checking signature
* Looser check on beacon state validity.
* Cleaned up get_attestation_state
* Expanded fork choice api to provide latest validator message.
* Checking if the an attestation contains a latest message
* Correct process_attestation error handling.
* Copy paste error in comment fixed.
* Tidy ancestor iterators
* Getting attestation slot via helper method
* Refactored attestation creation in test utils
* Revert "Refactored attestation creation in test utils"
This reverts commit 4d277fe4239a7194758b18fb5c00dfe0b8231306.
* Integration tests for free attestation processing
* Implicit conflicts resolved.
* formatting
* Do first pass on Grants code
* Add another attestation processing test
* Tidy attestation processing
* Remove old code fragment
* Add non-compiling half finished changes
* Simplify, fix bugs, add tests for chain iters
* Remove attestation processing from op pool
* Fix bug with fork choice, tidy
* Fix overly restrictive check in fork choice.
* Ensure committee cache is build during attn proc
* Ignore unknown blocks at fork choice
* Various minor fixes
* Make fork choice write lock in to read lock
* Remove unused method
* Tidy comments
* Fix attestation prod. target roots change
* Fix compile error in store iters
* Reject any attestation prior to finalization
* Begin metrics refactor
* Move beacon_chain to new metrics structure.
* Make metrics not panic if already defined
* Use global prometheus gather at rest api
* Unify common metric fns into a crate
* Add heavy metering to block processing
* Remove hypen from prometheus metric name
* Add more beacon chain metrics
* Add beacon chain persistence metric
* Prune op pool on finalization
* Add extra prom beacon chain metrics
* Prefix BeaconChain metrics with "beacon_"
* Add more store metrics
* Add basic metrics to libp2p
* Add metrics to HTTP server
* Remove old `http_server` crate
* Update metrics names to be more like standard
* Fix broken beacon chain metrics, add slot clock metrics
* Add lighthouse_metrics gather fn
* Remove http args
* Fix wrong state given to op pool prune
* Make prom metric names more consistent
* Add more metrics, tidy existing metrics
* Fix store block read metrics
* Tidy attestation metrics
* Fix minor PR comments
* Allow travis failures on beta (see desc)
There's a non-backward compatible change in `cargo fmt`. Stable and beta
do not agree.
* Tidy `lighthouse_metrics` docs
* Fix typo
* Add half-finished rest api changes
* Add basic, messy changes to rest api
* Fix expect() in ApiRequest
* Remove ApiRequest, add route for beacon state
* Tidy rest api, add get state from root
* Add api method for getting state roots by slot
* Add test for URL helper
* Simplify state_at_slot fn
* Add tests for rest api helper fns
* Add extra tests for parse root
* Fix clippy lints
* Fix compile error in rest api
* Update test to new ethereum-types
* Implement more flexible beacon chain genesis
* Fix compile issues from rebase on master
* Rename CLI flag
* Adds initial documentation for TOML files
* Update docs readme
* Add first version of cli_util
* Dont write cache fields in serde
* Tidy cli_util
* Add code to load genesis YAML file
* Move serde_utils out of tests in `types`
* Update logging text
* Fix serde YAML for Fork
* Make yaml hex decoding more strict
* Update deterministic key generate for interop
* Set deposit count on testing genesis state
* Make some fixes for deposit count
* Remove code fragements
* Large restructure of docs
* Tidy docs
* Fix readme link
* Add interop docs
* Tidy README
* Added generated code for REST API.
- Created a new crate rest_api, which will adapt the openapi generated code to Lighthouse
- Committed automatically generated code from openapi-generator-cli (via docker). Should hopfully not have to modify this at all, and do all changes in the rest_api crate.
* Removed openapi generated code, because it was the rust client, not the rust server.
* Added the correct rust-server code, automatically generated from openapi.
* Added generated code for REST API.
- Created a new crate rest_api, which will adapt the openapi generated code to Lighthouse
- Committed automatically generated code from openapi-generator-cli (via docker). Should hopfully not have to modify this at all, and do all changes in the rest_api crate.
* Removed openapi generated code, because it was the rust client, not the rust server.
* Added the correct rust-server code, automatically generated from openapi.
* Included REST API in configuratuion.
- Started adding the rest_api into the beacon node's dependencies.
- Set up configuration file for rest_api and integrated into main client config
- Added CLI flags for REST API.
* Futher work on REST API.
- Adding the dependencies to rest_api crate
- Created a skeleton BeaconNodeService, which will handle /node requests.
- Started the rest_api server definition, with the high level request handling logic.
* Added generated code for REST API.
- Created a new crate rest_api, which will adapt the openapi generated code to Lighthouse
- Committed automatically generated code from openapi-generator-cli (via docker). Should hopfully not have to modify this at all, and do all changes in the rest_api crate.
* Removed openapi generated code, because it was the rust client, not the rust server.
* Added the correct rust-server code, automatically generated from openapi.
* Included REST API in configuratuion.
- Started adding the rest_api into the beacon node's dependencies.
- Set up configuration file for rest_api and integrated into main client config
- Added CLI flags for REST API.
* Futher work on REST API.
- Adding the dependencies to rest_api crate
- Created a skeleton BeaconNodeService, which will handle /node requests.
- Started the rest_api server definition, with the high level request handling logic.
* WIP: Restructured REST API to use hyper_router and separate services.
* WIP: Fixing rust for REST API
* WIP: Fixed up many bugs in trying to get router to compile.
* WIP: Got the beacon_node to compile with the REST changes
* Basic API works!
- Changed CLI flags from rest-api* to api*
- Fixed port cli flag
- Tested, works over HTTP
* WIP: Moved things around so that we can get state inside the handlers.
* WIP: Significant API updates.
- Started writing a macro for getting the handler functions.
- Added the BeaconChain into the type map, gives stateful access to the beacon state.
- Created new generic error types (haven't figured out yet), to reduce code duplication.
- Moved common stuff into lib.rs
* WIP: Factored macros, defined API result and error.
- did more logging when creating HTTP responses
- Tried moving stuff into macros, but can't get macros in macros to compile.
- Pulled out a lot of placeholder code.
* Fixed macros so that things compile.
* Cleaned up code.
- Removed unused imports
- Removed comments
- Addressed all compiler warnings.
- Ran cargo fmt.
* Removed auto-generated OpenAPI code.
* Addressed Paul's suggestions.
- Fixed spelling mistake
- Moved the simple macros into functions, since it doesn't make sense for them to be macros.
- Removed redundant code & inclusions.
* Removed redundant validate_request function.
* Included graceful shutdown in Hyper server.
* Fixing the dropped exit_signal, which prevented the API from starting.
* Wrapped the exit signal, to get an API shutdown log line.
* add logging functionality for aligning key value pairs after the main messages
* move to own crate, change default message width to 40
* use FullFormat in validator_client (CompactFormat is not compatible with aligning)
* move logging to eth2/utils/logging
* types: first updates for v0.8
* state_processing: epoch processing v0.8.0
* state_processing: block processing v0.8.0
* tree_hash_derive: support generics in SignedRoot
* types v0.8: update to use ssz_types
* state_processing v0.8: use ssz_types
* ssz_types: add bitwise methods and from_elem
* types: fix v0.8 FIXMEs
* ssz_types: add bitfield shift_up
* ssz_types: iterators and DerefMut for VariableList
* types,state_processing: use VariableList
* ssz_types: fix BitVector Decode impl
Fixed a typo in the implementation of ssz::Decode for BitVector, which caused it
to be considered variable length!
* types: fix test modules for v0.8 update
* types: remove slow type-level arithmetic
* state_processing: fix tests for v0.8
* op_pool: update for v0.8
* ssz_types: Bitfield difference length-independent
Allow computing the difference of two bitfields of different lengths.
* Implement compact committee support
* epoch_processing: committee & active index roots
* state_processing: genesis state builder v0.8
* state_processing: implement v0.8.1
* Further improve tree_hash
* Strip examples, tests from cached_tree_hash
* Update TreeHash, un-impl CachedTreeHash
* Update bitfield TreeHash, un-impl CachedTreeHash
* Update FixedLenVec TreeHash, unimpl CachedTreeHash
* Update update tree_hash_derive for new TreeHash
* Fix TreeHash, un-impl CachedTreeHash for ssz_types
* Remove fixed_len_vec, ssz benches
SSZ benches relied upon fixed_len_vec -- it is easier to just delete
them and rebuild them later (when necessary)
* Remove boolean_bitfield crate
* Fix fake_crypto BLS compile errors
* Update ef_tests for new v.8 type params
* Update ef_tests submodule to v0.8.1 tag
* Make fixes to support parsing ssz ef_tests
* `compact_committee...` to `compact_committees...`
* Derive more traits for `CompactCommittee`
* Flip bitfield byte-endianness
* Fix tree_hash for bitfields
* Modify CLI output for ef_tests
* Bump ssz crate version
* Update ssz_types doc comment
* Del cached tree hash tests from ssz_static tests
* Tidy SSZ dependencies
* Rename ssz_types crate to eth2_ssz_types
* validator_client: update for v0.8
* ssz_types: update union/difference for bit order swap
* beacon_node: update for v0.8, EthSpec
* types: disable cached tree hash, update min spec
* state_processing: fix slot bug in committee update
* tests: temporarily disable fork choice harness test
See #447
* committee cache: prevent out-of-bounds access
In the case where we tried to access the committee of a shard that didn't have a committee in the
current epoch, we were accessing elements beyond the end of the shuffling vector and panicking! This
commit adds a check to make the failure safe and explicit.
* fix bug in get_indexed_attestation and simplify
There was a bug in our implementation of get_indexed_attestation whereby
incorrect "committee indices" were used to index into the custody bitfield. The
bug was only observable in the case where some bits of the custody bitfield were
set to 1. The implementation has been simplified to remove the bug, and a test
added.
* state_proc: workaround for compact committees bug
https://github.com/ethereum/eth2.0-specs/issues/1315
* v0.8: updates to make the EF tests pass
* Remove redundant max operation checks.
* Always supply both messages when checking attestation signatures -- allowing
verification of an attestation with no signatures.
* Swap the order of the fork and domain constant in `get_domain`, to match
the spec.
* rustfmt
* ef_tests: add new epoch processing tests
* Integrate v0.8 into master (compiles)
* Remove unused crates, fix clippy lints
* Replace v0.6.3 tags w/ v0.8.1
* Remove old comment
* Ensure lmd ghost tests only run in release
* Update readme
* Change reduced tree for adding weightless node
* Add more comments for reduced tree fork choice
* Small refactor on reduced tree for readability
* Move test_harness forking logic into itself
* Add new `AncestorIter` trait to store
* Add unfinished tests to fork choice
* Make `beacon_state.genesis_block_root` public
* Add failing lmd_ghost fork choice tests
* Extend fork_choice tests, create failing test
* Implement Debug for generic ReducedTree
* Add lazy_static to fork choice tests
* Add verify_integrity fn to reduced tree
* Fix bugs in reduced tree
* Ensure all reduced tree tests verify integrity
* Slightly alter reduce tree test params
* Add (failing) reduced tree test
* Fix bug in fork choice
Iter ancestors was not working well with skip slots
* Put maximum depth for common ancestor search
Ensures that we don't search back past the finalized root.
* Add basic finalization tests for reduced tree
* Change fork choice to use beacon_block_root
Previously it was using target_root, which was wrong
* Change reduced tree for adding weightless node
* Add more comments for reduced tree fork choice
* Small refactor on reduced tree for readability
* Move test_harness forking logic into itself
* Add new `AncestorIter` trait to store
* Add unfinished tests to fork choice
* Make `beacon_state.genesis_block_root` public
* Add failing lmd_ghost fork choice tests
* Extend fork_choice tests, create failing test
* Implement Debug for generic ReducedTree
* Add lazy_static to fork choice tests
* Add verify_integrity fn to reduced tree
* Fix bugs in reduced tree
* Ensure all reduced tree tests verify integrity
* Slightly alter reduce tree test params
* Add (failing) reduced tree test
* Fix bug in fork choice
Iter ancestors was not working well with skip slots
* Put maximum depth for common ancestor search
Ensures that we don't search back past the finalized root.
* Add basic finalization tests for reduced tree
* Add network dir CLI flag
* Simplify "NewSlot" log message
* Rename network-dir CLI flag
* Change fork choice to use beacon_block_root
Previously it was using target_root, which was wrong
* Update db dir size for metrics
* Change slog to use `FullFormat` logging
* Update some comments and log formatting
* Add prom gauge for best block root
* Only add known target blocks to fork choice
* Add finalized and justified root prom metrics
* Add CLI flag for setting log level
* Add logger to beacon chain
* Add debug-level CLI flag to validator
* Allow block processing if fork choice fails
* Create warn log when there's low libp2p peer count
* Minor change to logging
* Make ancestor iter return option
* Disable fork choice test when !debug_assertions
* Fix type, removed code fragment
* Tidy some borrow-checker evading
* Lower reduced tree random test iterations
* Fix syncing bugs by recursively attempting to process parents in the import queue, change BlockRootsIterator
* Swap from crossbeam channel to tokio mpsc
* Recursion fix
* Remove exess block processing
* Fix network lag, correct attestation topic
* Correct network poll logic
* Overhaul of SimpleSync and modify BlockRootsIterator to return start_slot
* Fix bug in tests relating to StateRootsIterator
* Remove old, commented-out heartbeat code.
* Tidy docs on import queue enum
* Change source logging msg in simple sync
* Rename function parameter in simple sync
* Use `BestBlockRootsIterator` in `reduced_tree`
* Update comments for `BestBlockRootsIterator`
* Fix duplicate dep in cargo.toml
This is a massive commit which restructures the workspace, adds a very
basic, untested, validator client and some very basic, non-functioning
gRPC endpoints to the beacon-node.
