## Issue Addressed
#1992 and #1987, and also to be considered a continuation of #1751
## Proposed Changes
many changed files but most are renaming to align the code with the semantics of `--network`
- remove the `--network` default value (in clap) and instead set it after checking the `network` and `testnet-dir` flags
- move `eth2_testnet_config` crate to `eth2_network_config`
- move `Eth2TestnetConfig` to `Eth2NetworkConfig`
- move `DEFAULT_HARDCODED_TESTNET` to `DEFAULT_HARDCODED_NETWORK`
- `beacon_node`s `get_eth2_testnet_config` loads the `DEFAULT_HARDCODED_NETWORK` if there is no network nor testnet provided
- `boot_node`s config loads the config same as the `beacon_node`, it was using the configuration only for preconfigured networks (That code is ~1year old so I asume it was not intended)
- removed a one year old comment stating we should try to emulate `https://github.com/eth2-clients/eth2-testnets/tree/master/nimbus/testnet1` it looks outdated (?)
- remove `lighthouse`s `load_testnet_config` in favor of `get_eth2_network_config` to centralize that logic (It had differences)
- some spelling
## Additional Info
Both the command of #1992 and the scripts of #1987 seem to work fine, same as `bn` and `vc`
## Issue Addressed
NA
## Proposed Changes
This was mostly done to find the reason why LH was dropping peers from Nimbus. It proved to be useful so I think it's worth it. But there is also some functional stuff here
- Add metrics for rpc errors per client, error type and direction
- Add metrics for downscoring events per source type, client and penalty type
- Add metrics for gossip validation results per client for non-accepted messages
- Make the RPC handler return errors and requests/responses in the order we see them
- Allow a small burst for the Ping rate limit, from 1 every 5 seconds to 2 every 10 seconds
- Send rate limiting errors with a particular code and use that same code to identify them. I picked something different to 128 since that is most likely what other clients are using for their own errors
- Remove some unused code in the `PeerAction` and the rpc handler
- Remove the unused variant `RateLimited`. tTis was never produced directly, since the only way to get the request's protocol is via de handler. The handler upon receiving from LH a response with an error (rate limited in this case) emits this event with the missing info (It was always like this, just pointing out that we do downscore rate limiting errors regardless of the change)
Metrics for Nimbus looked like this:
Downscoring events: `increase(libp2p_peer_actions_per_client{client="Nimbus"}[5m])`
RPC Errors: `increase(libp2p_rpc_errors_per_client{client="Nimbus"}[5m])`
Unaccepted gossip message: `increase(gossipsub_unaccepted_messages_per_client{client="Nimbus"}[5m])`
## Issue Addressed
NA
## Proposed Changes
Updates out of date dependencies.
## Additional Info
See also https://github.com/sigp/lighthouse/issues/1712 for a list of dependencies that are still out of date and the resasons.
## Issue Addressed
Closes#2042
## Proposed Changes
Pass blocks that fail gossip verification to the slasher. Blocks that are successfully verified are not passed immediately, but will be passed as part of full block verification.
## Issue
Some eth1 clients are missing deposit logs on mainnet for multiple reasons (not fully synced, eth1 client issues) because of which we are getting `FailedToInsertDeposit` errors.
Ideally, LH should pick up where it left off after pointing it to a nice eth1 client endpoint (which has all deposits).
However, I have seen instances where LH keeps getting `FailedToInsertDeposit` even after switching to a good endpoint. Only deleting the beacon directory (which also wipes the eth1 cache) and resyncing the eth1 caches seems to be the solution. This wouldn't be great for mainnet if you have to sync your beacon node again as well.
## Proposed Changes
Add a `--purge-eth1-db` option which just wipes the eth1 cache and doesn't touch the rest of the beacon db.
Still need to investigate if and why LH isn't picking up where it left off for the deposit logs sync, but I think it would be good to have an option to just delete eth1 caches regardless.
## Issue Addressed
Resolves#1434 (this is the last major feature in the standard spec. There are only a couple of places we may be off-spec due to recent spec changes or ongoing discussion)
Partly addresses #1669
## Proposed Changes
- remove the websocket server
- remove the `TeeEventHandler` and `NullEventHandler`
- add server sent events according to the eth2 API spec
## Additional Info
This is according to the currently unmerged PR here: https://github.com/ethereum/eth2.0-APIs/pull/117
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2035
## Proposed Changes
Update 405's to 400's for failures when we are parsing path params.
## Additional Info
Haven't updated the same for non-standard endpoints
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fixes a couple of low hanging fruits.
- Fixes#2037
- `validators-dir` and `secrets-dir` flags don't really need to depend upon each other
- Fixes#2006 and Fixes#1995
Adds a `--privacy` CLI flag to the beacon node that users may opt into.
This does two things:
- Removes client identifying information from the identify libp2p protocol
- Changes the default graffiti to "" if no graffiti is set.
## Issue Addressed
NA
## Proposed Changes
- Log about eth1 whilst waiting for genesis.
- For the block and deposit caches, update them after each download instead of when *all* downloads are complete.
- This prevents the case where a single timeout error can cause us to drop *all* previously download blocks/deposits.
- Set `max_log_requests_per_update` to avoid timeouts due to very large log counts in a response.
- Set `max_blocks_per_update` to prevent a single update of the block cache to download an unreasonable number of blocks.
- This shouldn't have any affect in normal use, it's just a safe-guard against bugs.
- Increase the timeout for eth1 calls from 15s to 60s, as per @pawanjay176's experience with Infura.
## Additional Info
NA
## Issue Addressed
Following slog's documentation, this should help a bit with string allocations. I left it run for two days and mem usage is lower. This is of course anecdotal, but shouldn't harm anyway
## Proposed Changes
remove `String` creation in logs when possible
## Issue Addressed
NA
## Proposed Changes
This was causing:
```
Nov 28 21:56:08.154 ERRO slog-async: logger dropped messages due to channel overflow, count: 44, service: libp2p
```
## Additional Info
NA
Update lighthouse to version `v1.0.2`.
There are two major updates in this version:
- Updates to the task executor to tokio 0.3 and all sub-dependencies relying on core execution, including libp2p
- Update BLST
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
part of #1883
## Proposed Changes
Adds a new cli argument `--eth1-endpoints` that can be used instead of `--eth1-endpoint` to specify a comma-separated list of endpoints. If the first endpoint returns an error for some request the other endpoints are tried in the given order.
## Additional Info
Currently if the first endpoint fails the fallbacks are used silently (except for `try_fallback_test_endpoint` that is used in `do_update` which logs a `WARN` for each endpoint that is not reachable). A question is if we should add more logs so that the user gets warned if his main endpoint is for example just slow and sometimes hits timeouts.
## Proposed Changes
A user on Discord reported build issues when trying to compile Lighthouse checked out to a path with spaces in it. I've fixed the issue upstream in `leveldb-sys` (https://github.com/skade/leveldb-sys/pull/22), but rather than waiting for a new release of the `leveldb` crate, we can also work around the issue by disabling Snappy in LevelDB, which we weren't using anyway.
This may also have the side-effect of slightly improving compilation times, as LevelDB+Snappy was found to be a substantial contributor to build time (although I'm not sure how much was LevelDB and how much was Snappy).
## Issue Addressed
- Add metrics to keep track of peer counts by sync type
- Add metric to keep track of the number of syncing chains in range
## Proposed Changes
Plugin to the network metrics update interval and update too the counts for peers wrt to their sync status with us
## Additional Info
For the peer counts
- By the way it is implemented the numbers won't always match to the total peer count in the `libp2p` metric.
- Updating the gauge with every change is messy because it requires to be updated on connection (in the `eth2_libp2p` crate, while metrics are defined in the `network` crate) on Goodbye sent (for an `IrrelevantPeer`) either in the `beacon_processor` or the `peer_manager`, and on disconnection. Since this is not a critical metric I think counting once every second is enough. If you think more accuracy is needed we can do it too, but it would be harder to maintain)
ATM those look like this
## Issue Addressed
NA
## Proposed Changes
- Adds a HTTP server to the VC which provides Prometheus metrics.
- Moves the health metrics into the `lighthouse_metrics` crate so it can be shared between BN/VC.
- Sprinkle some metrics around the VC.
- Update the book to indicate that we now have VC metrics.
- Shifts the "waiting for genesis" logic later in the `ProductionValidatorClient::new_from_cli`
- This is worth attention during the review.
## Additional Info
- ~~`clippy` has some new lints that are failing. I'll deal with that in another PR.~~
## Issue Addressed
Two issues related to empty batches
- Chain target's was not being advanced when the batch was successful, empty and the chain didn't have an optimistic batch
- Not switching finalized chains. We now switch finalized chains requiring a minimum work first
## Issue Addressed
Resolves#1890
## Proposed Changes
Change the slasher database schema to key indexed attestations by `(target_epoch, indexed_attestation_root)` instead of just `indexed_attestation_root`. This allows more straight-forward pruning (linear scan), that is also "re-entrant". By re-entrant, we mean that a pruning pass that gets stuck because of a `MapFull` error can attempt to commit midway, and be resumed later without issue. The previous pruning strategy for indexed attestations did not have this property. There was also a flaw in the previous pruning that could leave "zombie" indexed attestations in the database (ones not referenced by any attester record), which could build up and contribute to bloat (although in practice I think they occur quite infrequently).
## Additional Info
During testing I noticed that a `MapFull` error can still occur during the commit of the transaction itself, which is irritating, but not unbearable. This PR should at least reduce the frequency with which users need to manually resize their DB, and if the `MapFull` on commit rears its ugly head too often we could use a dynamic strategy (temporarily increase the size of the map until the transaction commits).
The extra bytes for the epoch make the database a bit heavier, so the size estimate docs have been updated to reflect this. This is also a breaking schema change, so anyone using a v0 database from a few hours ago will need to drop it and update 😅
This is an implementation of a slasher that lives inside the BN and can be enabled via `lighthouse bn --slasher`.
Features included in this PR:
- [x] Detection of attester slashing conditions (double votes, surrounds existing, surrounded by existing)
- [x] Integration into Lighthouse's attestation verification flow
- [x] Detection of proposer slashing conditions
- [x] Extraction of attestations from blocks as they are verified
- [x] Compression of chunks
- [x] Configurable history length
- [x] Pruning of old attestations and blocks
- [x] More tests
Future work:
* Focus on a slice of history separate from the most recent N epochs (e.g. epochs `current - K` to `current - M`)
* Run out-of-process
* Ingest attestations from the chain without a resync
Design notes are here https://hackmd.io/@sproul/HJSEklmPL
## Issue Addressed
- Resolves#1424
## Proposed Changes
Add a `GET lighthouse/staking` that returns 200 if the node is ready to stake (i.e., `--eth1` flag is present) or a 404 otherwise.
Whilst the VC is waiting for the genesis time to start (i.e., when the genesis state is known), check the `lighthouse/staking` endpoint and log an error if the node isn't configured for staking.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds the `--import-all-attestations` flag which tells the `network::AttestationService` to import/aggregate all attestations after verification (instead of only ones for subnets that are relevant to local validators).
This is useful for testing/debugging and also for creating back-up nodes that should be all cached up and ready for any validator.
## Additional Info
NA
## Issue Addressed
we have a log saying we add a peer to a chain, and an another one in case the chain is not syncing. To avoid needing to peer there two (and reduce log entries) simply log the chain's syncing state in the chain's KV
## Issue Addressed
Closes#1719
## Proposed Changes
Lift the internal `RwLock`s and `Mutex`es from the `Observed*` data structures to resolve the race conditions described in #1719.
Most of this work was done by @paulhauner on his `lift-locks` branch, I merely updated it for the current `master` and checked over it.
## Additional Info
I think it would be prudent to test this on a testnet or two before mainnet launch, just to be sure that the extra lock contention doesn't negatively impact performance.
## Issue Addressed
- Resolves#1945
## Proposed Changes
- As per #1945, fix a log message from the metrics server that was falsely claiming to be from the api server.
- Ensure successful api request logs are published to debug, not trace. This is something I've wanted to do for a while.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Caches later blocks than is required by `ETH1_FOLLOW_DISTANCE`.
- Adds logging to `warn` if the eth1 cache is insufficiently primed.
- Use `max_by_key` instead of `max_by` in `BeaconChain::Eth1Chain` since it's simpler.
- Rename `voting_period_start_timestamp` to `voting_target_timestamp` for accuracy.
## Additional Info
The reason for eating into the `ETH1_FOLLOW_DISTANCE` and caching blocks that are closer to the head is due to possibility for `SECONDS_PER_ETH1_BLOCK` to be incorrect (as is the case for the Pyrmont testnet on Goerli).
If `SECONDS_PER_ETH1_BLOCK` is too short, we'll skip back too far from the head and skip over blocks that would be valid [`is_candidate_block`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/validator.md#eth1-data) blocks. This was the case on the Pyrmont testnet and resulted in Lighthouse choosing blocks that were about 30 minutes older than is ideal.
## Issue Addressed
Resolves#1333
## Proposed Changes
- Remove `deposit_signature_set()` function
- Prevent deposits from being in `SignatureSets`
- User `Signature.verify()` to verify deposit signatures rather than a signature set which uses `fast_aggregate_verify()`
## Additional Info
n/a
## Issue Addressed
`BlocksByRange` requests were the main culprit of a series of timeouts to peer's requests in general because they produce build up in the router's processor. Those were moved to the blocking executor but a task is being spawned for each; also not ideal since the amount of resources we give to those is not controlled
## Proposed Changes
- Move `BlocksByRange` and `BlocksByRoots` to the `beacon_processor`. The processor crafts the responses and sends them.
- Move too the processing of `StatusMessage`s from other peers. This is a fast operation but it can also build up and won't scale if we keep it in the router (processing one at the time). These don't need to send an answer, so there is no harm in processing them "later" if that were to happen. Sending responses to status requests is still in the router, so we answer as soon as we see them.
- Some "extras" that are basically clean up:
- Split the `Worker` logic in sync methods (chain processing and rpc blocks), gossip methods (the majority of methods) and rpc methods (the new ones)
- Move the `status_message` function previously provided by the router's processor to a more central place since it is used by the router, sync, network_context and beacon_processor
- Some spelling
## Additional Info
What's left to decide/test more thoroughly is the length of the queues and the priority rules. @paulhauner suggested at some point to put status above attestations, and @AgeManning had described an importance of "protecting gossipsub" so my solution is leaving status requests in the router and RPC methods below attestations. Slashings and Exits are at the end.
## Issue Addressed
Catching up on a few eth2 spec updates:
## Proposed Changes
- adding query params to the `GET pool/attestations` endpoint
- allowing the `POST pool/attestations` endpoint to accept an array of attestations
- batching attestation submission
- moving `epoch` from a path param to a query param in the `committees` endpoint
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Removes most of the temporary string initializations in network metrics and replaces them by directly using `&str`. This further improves on PR https://github.com/sigp/lighthouse/pull/1895.
For the subnet id handling the current approach uses a build script to create a static map. This has the disadvantage that the build script hardcodes the number of subnets. If we want to use more than 64 subnets we need to adjust this in the build script.
## Additional Info
We still have some string initializations for the enum `PeerKind`. To also replace that by `&str` I created a PR in the libp2p dependency: https://github.com/sigp/rust-libp2p/pull/91. Either we wait with merging until this dependency PR is merged (and all conflicts with the newest libp2p version are resolved) or we just merge as is and I will create another PR when the dependency is ready.
## Issue Addressed
NA
## Proposed Changes
Users on Discord (and @protolambda) have experienced this error (or variants of it):
```
Failed to update eth1 cache: GetDepositLogsFailed("Eth1 node returned error: {\"code\":-32005,\"message\":\"query returned more than 10000 results\"}")
```
This PR allows users to reduce the span of blocks searched for deposit logs and therefore reduce the size of the return result. Hopefully experimentation with this flag can lead to finding a better default value.
## Additional Info
NA
## Issue Addressed
*Should* address #1917
## Proposed Changes
Stops the `BackgroupMigrator` rx channel from backing up with big `BeaconState` messages.
Looking at some logs from my Medalla node, we can see a discrepancy between the head finalized epoch and the migrator finalized epoch:
```
Nov 17 16:50:21.606 DEBG Head beacon block slot: 129214, root: 0xbc7a…0b99, finalized_epoch: 4033, finalized_root: 0xf930…6562, justified_epoch: 4035, justified_root: 0x206b…9321, service: beacon
Nov 17 16:50:21.626 DEBG Batch processed service: sync, processed_blocks: 43, last_block_slot: 129214, chain: 8274002112260436595, first_block_slot: 129153, batch_epoch: 4036
Nov 17 16:50:21.626 DEBG Chain advanced processing_target: 4036, new_start: 4036, previous_start: 4034, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.162 DEBG Completed batch received awaiting_batches: 5, blocks: 47, epoch: 4048, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.162 DEBG Requesting batch start_slot: 129601, end_slot: 129664, downloaded: 0, processed: 0, state: Downloading(16Uiu2HAmG3C3t1McaseReECjAF694tjVVjkDoneZEbxNhWm1nZaT, 0 blocks, 1273), epoch: 4050, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.654 DEBG Database compaction complete service: beacon
Nov 17 16:50:22.655 INFO Starting database pruning new_finalized_epoch: 2193, old_finalized_epoch: 2192, service: beacon
```
I believe this indicates that the migrator rx has a backed-up queue of `MigrationNotification` items which each contain a `BeaconState`.
## TODO
- [x] Remove finalized state requirement for op-pool
## Proposed Changes
In an attempt to fix OOM issues and database consistency issues observed by some users after the introduction of compaction in v0.3.4, this PR makes the following changes:
* Run compaction less often: roughly every 1024 epochs, including after long periods of non-finality. I think the division check proposed by Paul is pretty solid, and ensures we don't miss any events where we should be compacting. LevelDB lacks an easy way to check the size of the DB, which would be another good trigger.
* Make it possible to disable the compaction on finalization using `--auto-compact-db=false`
* Make it possible to trigger a manual, single-threaded foreground compaction on start-up using `--compact-db`
* Downgrade the pruning log to `DEBUG`, as it's particularly noisy during sync
I would like to ship these changes to affected users ASAP, and will document them further in the Advanced Database section of the book if they prove effective.
## Issue Addressed
A peer might send a lot of requests that comply to the rate limit and the disconnect, this humongous pr makes sure we don't process them if the peer is not connected
This PR adds a number of improvements:
- Downgrade a warning log when we ignore blocks for gossipsub processing
- Revert a a correction to improve logging of peer score changes
- Shift syncing DB reads off the core-executor allowing parallel processing of large sync messages
- Correct the timeout logic of RPC chunk sends, giving more time before timing out RPC outbound messages.
## Issue Addressed
- RPC Errors were being logged twice: first in the peer manager and then again in the router, so leave just the peer manager's one
- The "reduce peer count" warn message gets thrown to the user for every missed chunk, so instead print it when the request times out and also do not include there info that is not relevant to the user
- The processor didn't have the service tag so add it
- Impl `KV` for status message
- Do not downscore peers if we are the ones that timed out
Other small improvements
## Issue Addressed
Resolves#1801
## Proposed Changes
Verify queries to `attestation_data` are for no later than `current_slot + 1`. If they are later than this, return a 400.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#1856
## Proposed Changes
- For clarity, the router's processor now only decides if a peer is compatible and it disconnects it or sends it to sync accordingly. No logic here regarding how useful is the peer.
- Update peer_sync_info's rules
- Add an `IrrelevantPeer` sync status to account for incompatible peers (maybe this should be "IncompatiblePeer" now that I think about it?) this state is update upon receiving an internal goodbye in the peer manager
- Misc code cleanups
- Reduce the need to create `StatusMessage`s (and thus, `Arc` accesses )
- Add missing calls to update the global sync state
The overall effect should be:
- More peers recognized as Behind, and less as Unknown
- Peers identified as incompatible
## Issue Addressed
- Asymmetric pings - Currently with symmetric ping intervals, lighthouse nodes race each other to ping often ending in simultaneous ping connections. This shifts the ping interval to be asymmetric based on inbound/outbound connections
- Correct inbound/outbound peer-db registering - It appears we were accounting inbound as outbound and vice versa in the peerdb, this has been corrected
- Improved logging
There is likely more to come - I'll leave this open as we investigate further testnets
## Issue Addressed
Using `heaptrack` I could see that ~75% of Lighthouse temporary allocations are caused by temporary string allocations here.
## Proposed Changes
Reduces temporary `String` allocations when updating metrics in the `network` crate. The solution isn't perfect since we rebuild our caches with each call, but it's a significant improvement.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Correctly handles peer state transitions on gossipsub changes + refactors handling of peer state transitions into one function used for lighthouse score changes and gossipsub score changes.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
Increases the target peers for a subnet, so that subnet queries are executed until we have at least the minimum required peers for a mesh (`MESH_N_LOW`). We keep the limit of `6` target peers for aggregated subnet discovery queries, therefore the size (and the time needed) for a query doesn't change.
## Issue Addressed
#1606
## Proposed Changes
Uses dynamic gossipsub scoring parameters depending on the number of active validators as specified in https://gist.github.com/blacktemplar/5c1862cb3f0e32a1a7fb0b25e79e6e2c.
## Additional Info
Although the parameters got tested on Medalla, extensive testing using simulations on larger networks is still to be done and we expect that we need to change the parameters, although this might only affect constants within the dynamic parameter framework.
## Issue Addressed
Resolves#1809Resolves#1824Resolves#1818Resolves#1828 (hopefully)
## Proposed Changes
- add `validator_index` to the proposer duties endpoint
- add the ability to query for historical proposer duties
- `StateId` deserialization now fails with a 400 warp rejection
- add the `validator_balances` endpoint
- update the `aggregate_and_proofs` endpoint to accept an array
- updates the attester duties endpoint from a `GET` to a `POST`
- reduces the number of times we query for proposer duties from once per slot per validator to only once per slot
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#1866
## Proposed Changes
* Compact the database on finalization. This removes the deleted states from disk completely. Because it happens in the background migrator, it doesn't block other database operations while it runs. On my Medalla node it took about 1 minute and shrank the database from 90GB to 9GB.
* Fix an inefficiency in the pruning algorithm where it would always use the genesis checkpoint as the `old_finalized_checkpoint` when running for the first time after start-up. This would result in loading lots of states one-at-a-time back to genesis, and storing a lot of block roots in memory. The new code stores the old finalized checkpoint on disk and only uses genesis if no checkpoint is already stored. This makes it both backwards compatible _and_ forwards compatible -- no schema change required!
* Introduce two new `INFO` logs to indicate when pruning has started and completed. Users seem to want to know this information without enabling debug logs!
Updates libp2p to the latest version.
This adds tokio 0.3 support and brings back yamux support.
This also updates some discv5 configuration parameters for leaner discovery queries
## Issue Addressed
NA
## Proposed Changes
Lets the networking behavior ignore messages of peers that are not connected. Furthermore, old peers are not removed from the peerdb based on score anymore but based on the disconnection time.
## Issue Addressed
- Related to #1691
## Proposed Changes
Adds the following API endpoints:
- `GET lighthouse/eth1/syncing`: status about how synced we are with Eth1.
- `GET lighthouse/eth1/block_cache`: all locally cached eth1 blocks.
- `GET lighthouse/eth1/deposit_cache`: all locally cached eth1 deposits.
Additionally:
- Moves some types from the `beacon_node/eth1` to the `common/eth2` crate, so they can be used in the API without duplication.
- Allow `update_deposit_cache` and `update_block_cache` to take an optional head block number to avoid duplicate requests.
## Additional Info
TBC
## Issue Addressed
Fixes head syncing
## Proposed Changes
- Get back to statusing peers after removing chain segments and making the peer manager deal with status according to the Sync status, preventing an old known deadlock
- Also a bug where a chain would get removed if the optimistic batch succeeds being empty
## Additional Info
Tested on Medalla and looking good
## Issue Addressed
NA
## Proposed Changes
As raised by @hermanjunge in a DM, the `http_api` tests have been observed taking 100+ minutes on debug. This PR:
- Moves the `http_api` tests to only run in release.
- Groups some `http_api` tests to reduce test-setup overhead.
## Additional Info
NA
## Issue Addressed
Michael's comment here: https://github.com/sigp/lighthouse/issues/1434#issuecomment-708834079Resolves#1808
## Proposed Changes
- Add query param `id` and `status` to the `validators` endpoint
- Add string serialization and deserialization for `ValidatorStatus`
- Drop `Epoch` from `ValidatorStatus` variants
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
Sync edge case when we get an empty optimistic batch that passes validation and is inside the download buffer. Eventually the chain would reach the batch and treat it as an ugly state.
## Proposed Changes
- Handle the edge case advancing the chain's target + code clarification
- Some largey changes for readability + ergonomics since rust has try ops
- Better handling of bad batch and chain states
## Issue Addressed
NA
## Proposed Changes
Currently a banned peer will remain banned indefinitely as long as update is called on the score struct regularly. This fixes this bug and the score decay starts after `BANNED_BEFORE_DECAY` seconds after banning.
## Issue Addressed
Closes#1504Closes#1505
Replaces #1703Closes#1707
## Proposed Changes
* Update BLST and Milagro to versions compatible with BLSv4 spec
* Update Lighthouse to spec v1.0.0-rc.0, and update EF test vectors
* Use the v1.0.0 constants for `MainnetEthSpec`.
* Rename `InteropEthSpec` -> `V012LegacyEthSpec`
* Change all constants to suit the mainnet `v0.12.3` specification (i.e., Medalla).
* Deprecate the `--spec` flag for the `lighthouse` binary
* This value is now obtained from the `config_name` field of the `YamlConfig`.
* Built in testnet YAML files have been updated.
* Ignore the `--spec` value, if supplied, log a warning that it will be deprecated
* `lcli` still has the spec flag, that's fine because it's dev tooling.
* Remove the `E: EthSpec` from `YamlConfig`
* This means we need to deser the genesis `BeaconState` on-demand, but this is fine.
* Swap the old "minimal", "mainnet" strings over to the new `EthSpecId` enum.
* Always require a `CONFIG_NAME` field in `YamlConfig` (it used to have a default).
## Additional Info
Lots of breaking changes, do not merge! ~~We will likely need a Lighthouse v0.4.0 branch, and possibly a long-term v0.3.0 branch to keep Medalla alive~~.
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#1825
## Proposed Changes
Since we penalize more blocks by range requests that have large steps, it is possible to get requests that will never be processed. We were not informing peers about this requests and also logging CRIT that is no longer relevant. Later we should check if more sophisticated handling for those requests is needed
## Issue Addressed
NA
## Proposed Changes
Fixes a bug which causes the node to reject valid eth1 nodes.
- Fix core bug: failure to apply `YamlConfig` values to `ChainSpec`.
- Add a test to prevent regression in this specific case.
- Fix an invalid log message
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Panic or return error if we overflow `usize` in SSZ decoding/encoding derive macros.
- I claim that the panics can only be triggered by a faulty type definition in lighthouse, they cannot be triggered externally on a validly defined struct.
- Use `Ordering` instead of some `if` statements, as demanded by clippy.
- Remove some old clippy `allow` that seem to no longer be required.
- Add comments to interesting clippy statements that we're going to continue to ignore.
- Create #1713
## Additional Info
NA
## Issue Addressed
- Related to #1691
## Proposed Changes
- Add `DEPOSIT_CHAIN_ID` and `DEPOSIT_NETWORK_ID` to `config.yaml`.
- Pass the `DEPOSIT_NETWORK_ID` to the `eth1::Service`.
- Remove the unused `MAX_EPOCHS_PER_CROSSLINK` from the `altona` and `medalla` configs (see [spec commit](2befe90032 (diff-efb845ac2ebd4aafbc23df40f47ce25699255064e99d36d0406d0a14ca7953ec))).
- Change from compressing the whole testnet directory, to only compressing the genesis state file. This is the only file we need to compress and *not* compressing the others makes them work nicely with git.
- We can modify the boot nodes, configs, etc. without incurring an eternal binary-blob cost on our git history.
- This change is backwards compatible (i.e., non-breaking).
## Additional Info
NA
## Issue Addressed
Further testing revealed another edge case where we attempt to unban a peer that can be in a disconnected start. Although this causes no real issue, it does log an error to the user.
This PR adds a check to prevent this edge case and prevents the error being logged to the user.
This PR prevents a user-facing error.
It prevents optimistically unbanning a peer and instead checks the state of the peer before requesting the peers state to be unbanned.
As @AgeManning mentioned the newest libp2p version had some problems and got downgraded again on lighthouse master. This is an intermediate version that makes no problems and only adds a small change of allowing only one topic per message.
## Description
This downgrades the recent libp2p upgrade.
There were issues with the RPC which prevented syncing of the chain and this upgrade needs to be further investigated.
## Overview
This updates lighthouse to discovery v5.1
Note: This makes lighthouse's discovery not compatible with any previous version. Lighthouse cannot discover peers or send/receive ENR's from any previous version. This is a breaking change.
This resolves#1605
## Description
This increases the logging of the underlying UPnP tasks to inform the user of UPnP error/success.
This also decreases the batch syncing size to two epochs per batch.
## Description
Updates to the latest libp2p and includes gossipsub updates.
Of particular note is the limitation of a single topic per gossipsub message.
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Closes#800Closes#1713
## Proposed Changes
Implement the temporary state storage algorithm described in #800. Specifically:
* Add `DBColumn::BeaconStateTemporary`, for storing 0-length temporary marker values.
* Store intermediate states immediately as they are created, marked temporary. Delete the temporary flag if the block is processed successfully.
* Add a garbage collection process to delete leftover temporary states on start-up.
* Bump the database schema version to 2 so that a DB with temporary states can't accidentally be used with older versions of the software. The auto-migration is a no-op, but puts in place some infra that we can use for future migrations (e.g. #1784)
## Additional Info
There are two known race conditions, one potentially causing permanent faults (hopefully rare), and the other insignificant.
### Race 1: Permanent state marked temporary
EDIT: this has been fixed by the addition of a lock around the relevant critical section
There are 2 threads that are trying to store 2 different blocks that share some intermediate states (e.g. they both skip some slots from the current head). Consider this sequence of events:
1. Thread 1 checks if state `s` already exists, and seeing that it doesn't, prepares an atomic commit of `(s, s_temporary_flag)`.
2. Thread 2 does the same, but also gets as far as committing the state txn, finishing the processing of its block, and _deleting_ the temporary flag.
3. Thread 1 is (finally) scheduled again, and marks `s` as temporary with its transaction.
4.
a) The process is killed, or thread 1's block fails verification and the temp flag is not deleted. This is a permanent failure! Any attempt to load state `s` will fail... hope it isn't on the main chain! Alternatively (4b) happens...
b) Thread 1 finishes, and re-deletes the temporary flag. In this case the failure is transient, state `s` will disappear temporarily, but will come back once thread 1 finishes running.
I _hope_ that steps 1-3 only happen very rarely, and 4a even more rarely. It's hard to know
This once again begs the question of why we're using LevelDB (#483), when it clearly doesn't care about atomicity! A ham-fisted fix would be to wrap the hot and cold DBs in locks, which would bring us closer to how other DBs handle read-write transactions. E.g. [LMDB only allows one R/W transaction at a time](https://docs.rs/lmdb/0.8.0/lmdb/struct.Environment.html#method.begin_rw_txn).
### Race 2: Temporary state returned from `get_state`
I don't think this race really matters, but in `load_hot_state`, if another thread stores a state between when we call `load_state_temporary_flag` and when we call `load_hot_state_summary`, then we could end up returning that state even though it's only a temporary state. I can't think of any case where this would be relevant, and I suspect if it did come up, it would be safe/recoverable (having data is safer than _not_ having data).
This could be fixed by using a LevelDB read snapshot, but that would require substantial changes to how we read all our values, so I don't think it's worth it right now.
## Issue Addressed
Potentially resolves#1647 and sync stalls.
## Proposed Changes
The handling of the state of banned peers was inadequate for the complex peerdb data structure. We store a limited number of disconnected and banned peers in the db. We were not tracking intermediate "disconnecting" states and the in some circumstances we were updating the peer state without informing the peerdb. This lead to a number of inconsistencies in the peer state.
Further, the peer manager could ban a peer changing a peer's state from being connected to banned. In this circumstance, if the peer then disconnected, we didn't inform the application layer, which lead to applications like sync not being informed of a peers disconnection. This could lead to sync stalling and having to require a lighthouse restart.
Improved handling for peer states and interactions with the peerdb is made in this PR.
## Issue Addressed
NA
## Proposed Changes
Adds a `lighthouse/beacon/states/:state_id/ssz` endpoint to allow us to pull the genesis state from the API.
## Additional Info
NA
## Issue Addressed
Closes#1769Closes#1708
## Proposed Changes
Tweaks the op pool pruning so that the attestation pool is pruned against the wall-clock epoch instead of the finalized state's epoch. This should reduce the unbounded growth that we've seen during periods without finality.
Also fixes up the voluntary exit pruning as raised in #1708.
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
`node` endpoints in #1434
## Proposed Changes
Implement these:
```
/eth/v1/node/health
/eth/v1/node/peers/{peer_id}
/eth/v1/node/peers
```
- Add an `Option<Enr>` to `PeerInfo`
- Finish implementation of `/eth/v1/node/identity`
## Additional Info
- should update the `peers` endpoints when #1764 is resolved
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#1548
## Proposed Changes
Optimizes attester slashing choice by choosing the ones that cover the most amount of validators slashed, with the highest effective balances
## Additional Info
Initial pass, need to write a test for it
check for advanced peers and the state of the chain wrt the clock slot to decide if a chain is or not synced /transitioning to a head sync. Also a fix that prevented getting the right state while syncing heads
## Issue Addressed
Resolves#1776
## Proposed Changes
The beacon chain builder was using the canonical head's state root for the `genesis_state_root` field.
## Additional Info
## Issue Addressed
Resolves#1792
## Proposed Changes
Use `chain.best_slot()` instead of the sync state's target slot in the `not_while_syncing_filter`
## Additional Info
N/A
## Issue Addressed
#1614 and a couple of sync-stalling problems, the most important is a cyclic dependency between the sync manager and the peer manager
## Issue Addressed
Closes#1557
## Proposed Changes
Modify the pruning algorithm so that it mutates the head-tracker _before_ committing the database transaction to disk, and _only if_ all the heads to be removed are still present in the head-tracker (i.e. no concurrent mutations).
In the process of writing and testing this I also had to make a few other changes:
* Use internal mutability for all `BeaconChainHarness` functions (namely the RNG and the graffiti), in order to enable parallel calls (see testing section below).
* Disable logging in harness tests unless the `test_logger` feature is turned on
And chose to make some clean-ups:
* Delete the `NullMigrator`
* Remove type-based configuration for the migrator in favour of runtime config (simpler, less duplicated code)
* Use the non-blocking migrator unless the blocking migrator is required. In the store tests we need the blocking migrator because some tests make asserts about the state of the DB after the migration has run.
* Rename `validators_keypairs` -> `validator_keypairs` in the `BeaconChainHarness`
## Testing
To confirm that the fix worked, I wrote a test using [Hiatus](https://crates.io/crates/hiatus), which can be found here:
https://github.com/michaelsproul/lighthouse/tree/hiatus-issue-1557
That test can't be merged because it inserts random breakpoints everywhere, but if you check out that branch you can run the test with:
```
$ cd beacon_node/beacon_chain
$ cargo test --release --test parallel_tests --features test_logger
```
It should pass, and the log output should show:
```
WARN Pruning deferred because of a concurrent mutation, message: this is expected only very rarely!
```
## Additional Info
This is a backwards-compatible change with no impact on consensus.
## Issue Addressed
NA
## Proposed Changes
Adds a direction field to `PeerConnectionStatus` that can be accessed by calling `is_outgoing` which will return `true` iff the peer is connected and the first connection was an outgoing one.
## Issue Addressed
#1729#1730
Which issue # does this PR address?
## Proposed Changes
1. Fixes a bug in the simulator where nodes can't find each other due to 0 udp ports in their enr.
2. Fixes bugs in attestation service where we are unsubscribing from a subnet prematurely.
More testing is needed for attestation service fixes.
## Proposed Changes
Adds a gossipsub topic filter that only allows subscribing and incoming subscriptions from valid ETH2 topics.
## Additional Info
Currently the preparation of the valid topic hashes uses only the current fork id but in the future it must also use all possible future fork ids for planned forks. This has to get added when hard coded forks get implemented.
DO NOT MERGE: We first need to merge the libp2p changes (see https://github.com/sigp/rust-libp2p/pull/70) so that we can refer from here to a commit hash inside the lighthouse branch.
## Proposed Changes
Implement the new message id function (see https://github.com/ethereum/eth2.0-specs/pull/2089) using an additional fast message id function for better performance + caching decompressed data.
## Issue Addressed
N/A
## Proposed Changes
This PR limits the length of the stream received by the snappy decoder to be the maximum allowed size for the received rpc message type. Also adds further checks to ensure that the length specified in the rpc [encoding-dependent header](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/p2p-interface.md#encoding-strategies) is within the bounds for the rpc message type being decoded.
Squashed commit of the following:
commit f99373cbaec9adb2bdbae3f7e903284327962083
Author: Age Manning <Age@AgeManning.com>
Date: Mon Oct 5 18:44:09 2020 +1100
Clean up obsolute TODOs
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
* Initial rebase
* Remove old code
* Correct release tests
* Rebase commit
* Remove eth2-testnet dep on eth2libp2p
* Remove crates lost in rebase
* Remove unused dep
## Issue Addressed
Downgrade inconsistent chain segment states from `panic` to `crit`. I don't love this solution but since range can always bounce back from any of those, we don't panic.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
chain state inconsistencies
## Proposed Changes
- a batch can be fake-failed by Range if it needs to move a peer to another chain. The peer will still send blocks/ errors / produce timeouts for those requests, so check when we get a response from the RPC that the request id matches, instead of only the peer, since a re-request can be directed to the same peer.
- if an optimistic batch succeeds, store the attempt to avoid trying it again when quickly switching chains. Also, use it only if ahead of our current target, instead of the segment's start epoch
## Issue Addressed
NA
## Proposed Changes
Uses a `Drop` implementation to help ensure that `BeaconProcessor` workers are freed. This will help prevent against regression, if someone happens to add an early return and it will also help in the case of a panic.
## Additional Info
NA
## Issue Addressed
Downgrade inconsistent chain segment states from `panic` to `crit`. I don't love this solution but since range can always bounce back from any of those, we don't panic.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
chain state inconsistencies
## Proposed Changes
- a batch can be fake-failed by Range if it needs to move a peer to another chain. The peer will still send blocks/ errors / produce timeouts for those requests, so check when we get a response from the RPC that the request id matches, instead of only the peer, since a re-request can be directed to the same peer.
- if an optimistic batch succeeds, store the attempt to avoid trying it again when quickly switching chains. Also, use it only if ahead of our current target, instead of the segment's start epoch
## Issue Addressed
NA
## Proposed Changes
Uses a `Drop` implementation to help ensure that `BeaconProcessor` workers are freed. This will help prevent against regression, if someone happens to add an early return and it will also help in the case of a panic.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Addresses an interesting DoS vector raised by @protolambda by verifying that the head and target are consistent when processing aggregate attestations. This check prevents us from loading very old target blocks and doing lots of work to skip them to the current slot.
## Additional Info
NA
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
This commit was edited by Paul H when rebasing from master to
v0.3.0-staging.
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Addresses an interesting DoS vector raised by @protolambda by verifying that the head and target are consistent when processing aggregate attestations. This check prevents us from loading very old target blocks and doing lots of work to skip them to the current slot.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
## Issue Addressed
#927
## Proposed Changes
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
## Additional Info
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
## Proposed Changes
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
## Additional Info
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#673
## Proposed Changes
Store a schema version in the database so that future releases can check they're running against a compatible database version. This would also enable automatic migration on breaking database changes, but that's left as future work.
The database config is also stored in the database so that the `slots_per_restore_point` value can be checked for consistency, which closes#673
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1313
## Proposed Changes
Changes the way we start the validator client and beacon node to ensure that we cleanly drop the validator keystores (which therefore ensures we cleanup their lockfiles).
Previously we were holding the validator keystores in a tokio task that was being forcefully killed (i.e., without `Drop`). Now, we hold them in a task that can gracefully handle a shutdown.
Also, switches the `--strict-lockfiles` flag to `--delete-lockfiles`. This means two things:
1. We are now strict on lockfiles by default (before we weren't).
1. There's a simple way for people delete the lockfiles if they experience a crash.
## Additional Info
I've only given the option to ignore *and* delete lockfiles, not just ignore them. I can't see a strong need for ignore-only but could easily add it, if the need arises.
I've flagged this as `api-breaking` since users that have lockfiles lingering around will be required to supply `--delete-lockfiles` next time they run.
## Issue Addressed
Closes#1680
## Proposed Changes
This PR fixes a race condition in beacon node start-up whereby the pubkey cache could be created by the beacon chain builder before the `PersistedBeaconChain` was stored to disk. When the node restarted, it would find the persisted chain missing, and attempt to start from scratch, creating a new pubkey cache in the process. This call to `ValidatorPubkeyCache::new` would fail if the file already existed (which it did). I changed the behaviour so that pubkey cache initialization now doesn't care whether there's a file already in existence (it's only a cache after all). Instead it will truncate and recreate the file in the race scenario described.
## Issue Addressed
NA
## Proposed Changes
There are four new conditions introduced in v0.12.3:
1. _[REJECT]_ The attestation's epoch matches its target -- i.e. `attestation.data.target.epoch ==
compute_epoch_at_slot(attestation.data.slot)`
1. _[REJECT]_ The attestation's target block is an ancestor of the block named in the LMD vote -- i.e.
`get_ancestor(store, attestation.data.beacon_block_root, compute_start_slot_at_epoch(attestation.data.target.epoch)) == attestation.data.target.root`
1. _[REJECT]_ The committee index is within the expected range -- i.e. `data.index < get_committee_count_per_slot(state, data.target.epoch)`.
1. _[REJECT]_ The number of aggregation bits matches the committee size -- i.e.
`len(attestation.aggregation_bits) == len(get_beacon_committee(state, data.slot, data.index))`.
This PR implements new logic to suit (1) and (2). Tests are added for (3) and (4), although they were already implicitly enforced.
## Additional Info
- There's a bit of edge-case with target root verification that I raised here: https://github.com/ethereum/eth2.0-specs/pull/2001#issuecomment-699246659
- I've had to add an `--ignore` to `cargo audit` to get CI to pass. See https://github.com/sigp/lighthouse/issues/1669
## Issue Addressed
#629
## Proposed Changes
This removes banned peers from the DHT and informs discovery to block the node_id and the known source IP's associated with this node. It has the capabilities of un banning this peer after a period of time.
This also corrects the logic about banning specific IP addresses. We now use seen_ip addresses from libp2p rather than those sent to us via identify (which also include local addresses).
## Issue Addressed
In principle.. closes#1551 but in general are improvements for performance, maintainability and readability. The logic for the optimistic sync in actually simple
## Proposed Changes
There are miscellaneous things here:
- Remove unnecessary `BatchProcessResult::Partial` to simplify the batch validation logic
- Make batches a state machine. This is done to ensure batch state transitions respect our logic (this was previously done by moving batches between `Vec`s) and to ease the cognitive load of the `SyncingChain` struct
- Move most batch-related logic to the batch
- Remove `PendingBatches` in favor of a map of peers to their batches. This is to avoid duplicating peers inside the chain (peer_pool and pending_batches)
- Add `must_use` decoration to the `ProcessingResult` so that chains that request to be removed are handled accordingly. This also means that chains are now removed in more places than before to account for unhandled cases
- Store batches in a sorted map (`BTreeMap`) access is not O(1) but since the number of _active_ batches is bounded this should be fast, and saves performing hashing ops. Batches are indexed by the epoch they start. Sorted, to easily handle chain advancements (range logic)
- Produce the chain Id from the identifying fields: target root and target slot. This, to guarantee there can't be duplicated chains and be able to consistently search chains by either Id or checkpoint
- Fix chain_id not being present in all chain loggers
- Handle mega-edge case where the processor's work queue is full and the batch can't be sent. In this case the chain would lose the blocks, remain in a "syncing" state and waiting for a result that won't arrive, effectively stalling sync.
- When a batch imports blocks or the chain starts syncing with a local finalized epoch greater that the chain's start epoch, the chain is advanced instead of reset. This is to avoid losing download progress and validate batches faster. This also means that the old `start_epoch` now means "current first unvalidated batch", so it represents more accurately the progress of the chain.
- Batch status peers from the same chain to reduce Arc access.
- Handle a couple of cases where the retry counters for a batch were not updated/checked are now handled via the batch state machine. Basically now if we forget to do it, we will know.
- Do not send back the blocks from the processor to the batch. Instead register the attempt before sending the blocks (does not count as failed)
- When re-requesting a batch, try to avoid not only the last failed peer, but all previous failed peers.
- Optimize requesting batches ahead in the buffer by shuffling idle peers just once (this is just addressing a couple of old TODOs in the code)
- In chain_collection, store chains by their id in a map
- Include a mapping from request_ids to (chain, batch) that requested the batch to avoid the double O(n) search on block responses
- Other stuff:
- impl `slog::KV` for batches
- impl `slog::KV` for syncing chains
- PSA: when logging, we can use `%thing` if `thing` implements `Display`. Same for `?` and `Debug`
### Optimistic syncing:
Try first the batch that contains the current head, if the batch imports any block, advance the chain. If not, if this optimistic batch is inside the current processing window leave it there for future use, if not drop it. The tolerance for this block is the same for downloading, but just once for processing
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
N/A
## Proposed Changes
Prevent subscribing to core gossipsub topics until after we have achieved a full sync. This prevents us censoring gossipsub channels, getting penalised in gossipsub 1.1 scoring and saves us computation time in attempting to validate gossipsub messages which we will be unable to do with a non-sync'd chain.
## Issue Addressed
Closes#1472
## Proposed Changes
Add `--staking` ~~and`staking-with-eth1-endpoint`~~ flag to improve UX for stakers.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1080
## Proposed Changes
- Call `update_pubkey_cache` only in the `build_all_caches` method and `get_validator_index` method.
## Additional Info
This does reduce the number of places the cache is updated, making it simpler. But the `get_validator_index` method is used a couple times when we are iterating through the entire validator registry (or set of active validators). Before, we would only call `update_pubkey_cache` once before iterating through all validators. So I'm not _totally_ sure this change is worth it.
## Issue Addressed
- Resolves#1616
## Proposed Changes
If we look at the function which persists fork choice and the canonical head to disk:
1db8daae0c/beacon_node/beacon_chain/src/beacon_chain.rs (L234-L280)
There is a race-condition which might cause the canonical head and fork choice values to be out-of-sync.
I believe this is the cause of #1616. I managed to recreate the issue and produce a database that was unable to sync under the `master` branch but able to sync with this branch.
These new changes solve the issue by ignoring the persisted `canonical_head_block_root` value and instead getting fork choice to generate it. This ensures that the canonical head is in-sync with fork choice.
## Additional Info
This is hotfix method that leaves some crusty code hanging around. Once this PR is merged (to satisfy the v0.2.x users) we should later update and merge #1638 so we can have a clean fix for the v0.3.x versions.
## Issue Addressed
N/A
## Proposed Changes
Shifts the local `metadata` to `network_globals` making it accessible to the HTTP API and other areas of lighthouse.
## Additional Info
N/A
## Issue Addressed
N/A
## Proposed Changes
Adds the following check from the spec
> A reader SHOULD NOT read more than max_encoded_len(n) bytes after reading the SSZ length-prefix n from the header.
## Issue Addressed
- Resolves#1616
## Proposed Changes
Fixes a bug where we are unable to read the finalized block from fork choice.
## Detail
I had made an assumption that the finalized block always has a parent root of `None`:
e5fc6bab48/consensus/fork_choice/src/fork_choice.rs (L749-L752)
This was a faulty assumption, we don't set parent *roots* to `None`. Instead we *sometimes* set parent *indices* to `None`, depending if this pruning condition is satisfied:
e5fc6bab48/consensus/proto_array/src/proto_array.rs (L229-L232)
The bug manifested itself like this:
1. We attempt to get the finalized block from fork choice
1. We try to check that the block is descendant of the finalized block (note: they're the same block).
1. We expect the parent root to be `None`, but it's actually the parent root of the finalized root.
1. We therefore end up checking if the parent of the finalized root is a descendant of itself. (note: it's an *ancestor* not a *descendant*).
1. We therefore declare that the finalized block is not a descendant of (or eq to) the finalized block. Bad.
## Additional Info
In reflection, I made a poor assumption in the quest to obtain a probably negligible performance gain. The performance gain wasn't worth the risk and we got burnt.
## Issue Addressed
N/A
## Proposed Changes
This will consider all gossipsub messages that have either the `from`, `seqno` or `signature` field as invalid.
## Additional Info
We should not merge this until all other clients have been sending empty fields for a while.
See https://github.com/ethereum/eth2.0-specs/issues/1981 for reference
## Issue Addressed
https://github.com/ethereum/eth2.0-specs/pull/2044
## Proposed Changes
Shifts the gossipsub message id to use the first 8 bytes of the SHA256 hash of the gossipsub message data field.
## Additional Info
We should merge this in once the spec has been decided on. It will cause issues with gossipsub scoring and gossipsub propagation rates (as we won't receive IWANT) messages from clients that also haven't made this update.
## Issue Addressed
#1590
## Proposed Changes
This is a temporary workaround that prevents finalized chain sync from swapping chains. I'm merging this in now until the full solution is ready.
## Issue Addressed
Malicious users could request very large block ranges, more than we expect. Although technically legal, we are now quadraticaly weighting large step sizes in the filter. Therefore users may request large skips, but not a large number of blocks, to prevent requests forcing us to do long chain lookups.
## Proposed Changes
Weight the step parameter in the RPC filter and prevent any overflows that effect us in the step parameter.
## Additional Info
## Issue Addressed
Closes#1365
## Proposed Changes
Dial peers in the `cached_enrs` who aren't connected, aren't banned and satisfy the subnet predicate before making a subnet discovery query.
## Issue Addressed
Partly addresses #1547
## Proposed Changes
This fix addresses the missing attestations at slot 0 of an epoch (also sometimes slot 1 when slot 0 was skipped).
There are 2 cases:
1. BN receives the block for the attestation slot after 4 seconds (1/3rd of the slot).
2. No block is proposed for this slot.
In both cases, when we produce the attestation, we pass the head state to the
`produce_unaggregated_attestation_for_block` function here
9833eca024/beacon_node/beacon_chain/src/beacon_chain.rs (L845-L850)
Since we don't advance the state in this function, we set `attestation.data.source = state.current_justified_checkpoint` which is atleast 2 epochs lower than current_epoch(wall clock epoch).
This attestation is invalid and cannot be included in a block because of this assert from the spec:
```python
if data.target.epoch == get_current_epoch(state):
assert data.source == state.current_justified_checkpoint
state.current_epoch_attestations.append(pending_attestation)
```
https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/beacon-chain.md#attestations
This PR changes the `produce_unaggregated_attestation_for_block` function to ensure that it advances the state before producing the attestation at the new epoch.
Running this on my node, have missed 0 attestations across all 8 of my validators in a 100 epoch period 🎉
To compare, I was missing ~14 attestations across all 8 validators in the same 100 epoch period before the fix.
Will report missed attestations if any after running for another 100 epochs tomorrow.
## Issue Addressed
#1421
## Proposed Changes
Bounding the error_message that can be returned for RPC domain errors
Co-authored-by: Age Manning <Age@AgeManning.com>
Converts the graffiti binary data to string before printing to logs.
## Issue Addressed
#1566
## Proposed Changes
Rather than converting graffiti to a vector the binary data less the last character is passed to String::from_utf_lossy(). This then allows us to call the to_string() function directly to give us the string
## Additional Info
Rust skills are fairly weak
## Issue Addressed
N/A
## Proposed Changes
Adds extended metrics to get a better idea of what is happening at the gossipsub layer of lighthouse. This provides information about mesh statistics per topics, subscriptions and peer scores.
## Additional Info
## Issue Addressed
Fixes#1509
## Proposed Changes
Exit the beacon node if the eth1 endpoint points to an invalid eth1 network. Check the network id before every eth1 cache update and display an error log if the network id has changed to an invalid one.
## Issue Addressed
#1172
## Proposed Changes
* updates the libp2p dependency
* small adaptions based on changes in libp2p
* report not just valid messages but also invalid and distinguish between `IGNORE`d messages and `REJECT`ed messages
Co-authored-by: Age Manning <Age@AgeManning.com>
The PR:
* Adds the ability to generate a crucial test scenario that isn't possible with `BeaconChainHarness` (i.e. two blocks occupying the same slot; previously forks necessitated skipping slots):
* New testing API: Instead of repeatedly calling add_block(), you generate a sorted `Vec<Slot>` and leave it up to the framework to generate blocks at those slots.
* Jumping backwards to an earlier epoch is a hard error, so that tests necessarily generate blocks in a epoch-by-epoch manner.
* Configures the test logger so that output is printed on the console in case a test fails. The logger also plays well with `--nocapture`, contrary to the existing testing framework
* Rewrites existing fork pruning tests to use the new API
* Adds a tests that triggers finalization at a non epoch boundary slot
* Renamed `BeaconChainYoke` to `BeaconChainTestingRig` because the former has been too confusing
* Fixed multiple tests (e.g. `block_production_different_shuffling_long`, `delete_blocks_and_states`, `shuffling_compatible_simple_fork`) that relied on a weird (and accidental) feature of the old `BeaconChainHarness` that attestations aren't produced for epochs earlier than the current one, thus masking potential bugs in test cases.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#1488
## Proposed Changes
* Prevent the pruning algorithm from over-eagerly deleting states at skipped slots when they are shared with the canonical chain.
* Add `debug` logging to the pruning algorithm so we have so better chance of debugging future issues from logs.
* Modify the handling of the "finalized state" in the beacon chain, so that it's always the state at the first slot of the finalized epoch (previously it was the state at the finalized block). This gives database pruning a clearer and cleaner view of things, and will marginally impact the pruning of the op pool, observed proposers, etc (in ways that are safe as far as I can tell).
* Remove duplicated `RevertedFinalizedEpoch` check from `after_finalization`
* Delete useless and unused `max_finality_distance`
* Add tests that exercise pruning with shared states at skip slots
* Delete unnecessary `block_strategy` argument from `add_blocks` and friends in the test harness (will likely conflict with #1380 slightly, sorry @adaszko -- but we can fix that)
* Bonus: add a `BeaconChain::with_head` method. I didn't end up needing it, but it turned out quite nice, so I figured we could keep it?
## Additional Info
Any users who have experienced pruning errors on Medalla will need to resync after upgrading to a release including this change. This should end unbounded `chain_db` growth! 🎉
## Issue Addressed
NA
## Proposed Changes
Shift practically all HTTP endpoint handlers to the blocking executor (some very light tasks are left on the core executor).
## Additional Info
This PR covers the `rest_api` which will soon be refactored to suit the standard API. As such, I've cut a few corners and left some existing issues open in this patch. What I have done here should leave the API in state that is not necessary *exactly* the same, but good enough for us to run validators with. Specifically, the number of blocking workers that can be spawned is unbounded and I have not implemented a queue; this will need to be fixed when we implement the standard API.
## Issue Addressed
#1378
## Proposed Changes
Boot node reuses code from beacon_node to initialize network config. This also enables using the network directory to store/load the enr and the private key.
## Additional Info
Note that before this PR the port cli arguments were off (the argument was named `enr-port` but used as `boot-node-enr-port`).
Therefore as port always the cli port argument was used (for both enr and listening). Now the enr-port argument can be used to overwrite the listening port as the public port others should connect to.
Last but not least note, that this restructuring reuses `ethlibp2p::NetworkConfig` that has many more options than the ones used in the boot node. For example the network config has an own `discv5_config` field that gets never used in the boot node and instead another `Discv5Config` gets created later in the boot node process.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
#1283
## Proposed Changes
All peers with the same IP will be considered banned as long as there are more than 5 (constant) peers with this IP that have a score below the ban threshold. As soon as some of those 5 peers get unbanned (through decay) and if there are then less than 5 peers with a score below the threshold the IP will be considered not banned anymore.
## Issue Addressed
N/A
## Proposed Changes
Refactor attestation service to send out requests to find peers for subnets as soon as we get attestation duties.
Earlier, we had much more involved logic to send the discovery requests to the discovery service only 6 slots before the attestation slot. Now that discovery is much smarter with grouped queries, the complexity in attestation service can be reduced considerably.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
#1494
## Proposed Changes
- Give the TaskExecutor the sender side of a channel that a task can clone to request shutting down
- The receiver side of this channel is in environment and now we block until ctrl+c or an internal shutdown signal is received
- The swarm now informs when it has reached 0 listeners
- The network receives this message and requests the shutdown
## Issue Addressed
NA
## Proposed Changes
- Refactors the `BeaconProcessor` to remove some excessive nesting and file bloat
- Sorry about the noise from this, it's all contained in 4d3f8c5 though.
- Adds exits, proposer slashings, attester slashings to the `BeaconProcessor` so we don't get overwhelmed with large amounts of slashings (which happened a few hours ago).
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Sets the default max skips to 700 so that it can cover the 693 slot skip from `80894 - 80201`.
## Additional Info
NA
## Description
This PR improves some logging for the end-user.
It downgrades some warning logs and removes the slots per second sync speed if we are syncing and the speed is 0. This is likely because we are syncing from a finalised checkpoint and the head doesn't change.
## Issue Addressed
NA
## Proposed Changes
- Fixes a mistake I made in #1530 which resulted us in *not* rejecting attestations that we intended to reject.
- Adds skip-slot checks for blocks earlier in import process, so it rejects gossip and RPC blocks.
## Additional Info
NA
## Description
There can be many head chains queued up to complete. Currently we try and process all of these to completion before we consider the node synced.
In a chaotic network, there can be many of these and processing them to completion can be very expensive and slow. This PR removes any non-syncing head chains from the queue, and re-status's the peers. If, after we have synced to head on one chain, there is still a valid head chain to download, it will be re-established once the status has been returned.
This should assist with getting nodes to sync on medalla faster.
## Overview
There are forked chains which get referenced by blocks and attestations on a network. Typically if these chains are very long, we stop looking up the chain and downvote the peer. In extreme circumstances, many peers are on many chains, the chains can be very deep and become time consuming performing lookups.
This PR adds a cache to known failed chain lookups. This prevents us from starting a parent-lookup (or stopping one half way through) if we have attempted the chain lookup in the past.
## Description
Currently lighthouse load-balances across peers a single finalized chain. The chain is selected via the most peers. Once synced to the latest finalized epoch Lighthouse creates chains amongst its peers and syncs them all in parallel amongst each peer (grouped by their current head block).
This is typically fast and relatively efficient under normal operations. However if the chain has not finalized in a long time, the head chains can grow quite long. Peer's head chains will update every slot as new blocks are added to the head. Syncing all head chains in parallel is a bottleneck and highly inefficient in block duplication leads to RPC timeouts when attempting to handle all new heads chains at once.
This PR limits the parallelism of head syncing chains to 2. We now sync at most two head chains at a time. This allows for the possiblity of sync progressing alongside a peer being slow and holding up one chain via RPC timeouts.
The changes are somewhat simple but should solve two issues:
- When quickly changing between chains once and a second time back again, batchIds would collide and cause havoc.
- If we got an out of range response from a peer, sync would remain in syncing but without advancing
Changes:
- remove the batch id. Identify each batch (inside a chain) by its starting epoch. Target epochs for downloading and processing now advance by EPOCHS_PER_BATCH
- for the same reason, move the "to_be_downloaded_id" to be an epoch
- remove a sneaky line that dropped an out of range batch without downloading it
- bonus: put the chain_id in the log given to the chain. This is why explicitly logging the chain_id is removed
## Proposed Changes
To mitigate the impact of minority forks on RAM and disk usage, this change rejects blocks whose parent lies more than 320 slots (10 epochs, ~1 hour) in the past. The behaviour is configurable via `lighthouse bn --max-skip-slots N`, and can be turned off entirely using `--max-skip-slots none`.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Moves beacon block processing over to the newly-added `GossipProcessor`. This moves the task off the core executor onto the blocking one.
## Additional Info
- With this PR, gossip blocks are being ignored during sync.
## Issue Addressed
NA
## Proposed Changes
- Adds a new function to allow getting a state with a bad state root history for attestation verification. This reduces unnecessary tree hashing during attestation processing, which accounted for 23% of memory allocations (by bytes) in a recent `heaptrack` observation.
- Don't clone caches on intermediate epoch-boundary states during block processing.
- Reject blocks that are known to fork choice earlier during gossip processing, instead of waiting until after state has been loaded (this only happens in edge-case).
- Avoid multiple re-allocations by creating a "forced" exact size iterator.
## Additional Info
NA
## Issue Addressed
There is currently an issue with yamux when connecting to prysm peers. The source of the issue is currently unknown.
This PR removes yamux support to force mplex negotation. We can add back yamux support once we have isolated and corrected the issue.
## Issue Addressed
Resolves#1489
## Proposed Changes
- Change starting metadata seq num to 0 according to the [spec](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/p2p-interface.md#metadata).
- Remove metadata field from `NetworkGlobals`
- Persist metadata to disk on every update
- Load metadata seq number from disk on restart
- Persist enr to disk on update to ensure enr sequence number increments are persisted as well.
## Additional info
Since we modified starting metadata seq num to 0 from 1, we might still see `Invalid Sequence number provided` like in #1489 from prysm nodes if they have our metadata cached.
