## Issue Addressed
NA
## Proposed Changes
Run fork choice when the head is 256 slots from the wall-clock slot, rather than 4.
The reason we don't *always* run FC is so that it doesn't slow us down during sync. As the comments state, setting the value to 256 means that we'd only have one interrupting fork-choice call if we were syncing at 20 slots/sec.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds some metrics so we can track payload status responses from the EE. I think this will be useful for troubleshooting and alerting.
I also bumped the `BecaonChain::per_slot_task` to `debug` since it doesn't seem too noisy and would have helped us with some things we were debugging in the past.
## Additional Info
NA
## Proposed Changes
Match the timeouts from the `execution-apis` spec. Our existing values were already quite close so I don't imagine this change to be very disruptive.
The spec sets the timeout for `engine_getPayloadV1` to only 1 second, but we were already using a longer value of 2 seconds. I've kept the 2 second timeout as I don't think there's any need to fail faster when producing a payload.
There's no timeout specified for `eth_syncing` so I've matched it to the shortest timeout from the spec (1 second). I think the previous value of 250ms was likely too low and could have been contributing to spurious timeouts, particularly for remote ELs.
## Additional Info
The timeouts are defined on each endpoint in this document: https://github.com/ethereum/execution-apis/blob/main/src/engine/specification.md
## Issue Addressed
Fixes an issue whereby syncing a post-merge network without an execution endpoint would silently stall. Sync swallows the errors from block verification so previously there was no indication in the logs for why the node couldn't sync.
## Proposed Changes
Add an error log to the merge-readiness notifier for the case where the merge has already completed but no execution endpoint is configured.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2962
## Proposed Changes
Build all caches on the checkpoint state before storing it in the database.
Additionally, fix a bug in `signature_verify_chain_segment` which prevented block verification from succeeding unless the previous epoch cache was already built. The previous epoch cache is required to verify the signatures of attestations included from previous epochs, even when all the blocks in the segment are from the same epoch.
The comments around `signature_verify_chain_segment` have also been updated to reflect the fact that it should only be used on a chain of blocks from a single epoch. I believe this restriction had already been added at some point in the past and that the current comments were just outdated (and I think because the proposer shuffling can change in the next epoch based on the blocks applied in the current epoch that this limitation is essential).
## Issue Addressed
NA
## Proposed Changes
Start issuing merge-readiness logs 2 weeks before the Bellatrix fork epoch. Additionally, if the Bellatrix epoch is specified and the use has configured an EL, always log merge readiness logs, this should benefit pro-active users.
### Lookahead Reasoning
- Bellatrix fork is:
- epoch 144896
- slot 4636672
- Unix timestamp: `1606824023 + (4636672 * 12) = 1662464087`
- GMT: Tue Sep 06 2022 11:34:47 GMT+0000
- Warning start time is:
- Unix timestamp: `1662464087 - 604800 * 2 = 1661254487`
- GMT: Tue Aug 23 2022 11:34:47 GMT+0000
The [current expectation](https://discord.com/channels/595666850260713488/745077610685661265/1007445305198911569) is that EL and CL clients will releases out by Aug 22nd at the latest, then an EF announcement will go out on the 23rd. If all goes well, LH will start alerting users about merge-readiness just after the announcement.
## Additional Info
NA
## Proposed Changes
Enable multiple database backends for the slasher, either MDBX (default) or LMDB. The backend can be selected using `--slasher-backend={lmdb,mdbx}`.
## Additional Info
In order to abstract over the two library's different handling of database lifetimes I've used `Box::leak` to give the `Environment` type a `'static` lifetime. This was the only way I could think of using 100% safe code to construct a self-referential struct `SlasherDB`, where the `OpenDatabases` refers to the `Environment`. I think this is OK, as the `Environment` is expected to live for the life of the program, and both database engines leave the database in a consistent state after each write. The memory claimed for memory-mapping will be freed by the OS and appropriately flushed regardless of whether the `Environment` is actually dropped.
We are depending on two `sigp` forks of `libmdbx-rs` and `lmdb-rs`, to give us greater control over MDBX OS support and LMDB's version.
## Issue Addressed
N/A
## Proposed Changes
Fix clippy lints for latest rust version 1.63. I have allowed the [derive_partial_eq_without_eq](https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq) lint as satisfying this lint would result in more code that we might not want and I feel it's not required.
Happy to fix this lint across lighthouse if required though.
## Issue Addressed
Solves #3390
So after checking some logs @pawanjay176 got, we conclude that this happened because we blacklisted a chain after trying it "too much". Now here, in all occurrences it seems that "too much" means we got too many download failures. This happened very slowly, exactly because the batch is allowed to stay alive for very long times after not counting penalties when the ee is offline. The error here then was not that the batch failed because of offline ee errors, but that we blacklisted a chain because of download errors, which we can't pin on the chain but on the peer. This PR fixes that.
## Proposed Changes
Adds a missing piece of logic so that if a chain fails for errors that can't be attributed to an objectively bad behavior from the peer, it is not blacklisted. The issue at hand occurred when new peers arrived claiming a head that had wrongfully blacklisted, even if the original peers participating in the chain were not penalized.
Another notable change is that we need to consider a batch invalid if it processed correctly but its next non empty batch fails processing. Now since a batch can fail processing in non empty ways, there is no need to mark as invalid previous batches.
Improves some logging as well.
## Additional Info
We should do this regardless of pausing sync on ee offline/unsynced state. This is because I think it's almost impossible to ensure a processing result will reach in a predictable order with a synced notification from the ee. Doing this handles what I think are inevitable data races when we actually pause sync
This also fixes a return that reports which batch failed and caused us some confusion checking the logs
## Issue Addressed
NA
## Proposed Changes
Removes three types of TODOs:
1. `execution_layer/src/lib.rs`: It was [determined](https://github.com/ethereum/consensus-specs/issues/2636#issuecomment-988688742) that there is no action required here.
2. `beacon_processor/worker/gossip_methods.rs`: Removed TODOs relating to peer scoring that have already been addressed via `epe.penalize_peer()`.
- It seems `cargo fmt` wanted to adjust some things here as well 🤷
3. `proto_array_fork_choice.rs`: it would be nice to remove that useless `bool` for cleanliness, but I don't think it's something we need to do and the TODO just makes things look messier IMO.
## Additional Info
There should be no functional changes to the code in this PR.
There are still some TODOs lingering, those ones require actual changes or more thought.
## Issue Addressed
Resolves#3388Resolves#2638
## Proposed Changes
- Return the `BellatrixPreset` on `/eth/v1/config/spec` by default.
- Allow users to opt out of this by providing `--http-spec-fork=altair` (unless there's a Bellatrix fork epoch set).
- Add the Altair constants from #2638 and make serving the constants non-optional (the `http-disable-legacy-spec` flag is deprecated).
- Modify the VC to only read the `Config` and not to log extra fields. This prevents it from having to muck around parsing the `ConfigAndPreset` fields it doesn't need.
## Additional Info
This change is backwards-compatible for the VC and the BN, but is marked as a breaking change for the removal of `--http-disable-legacy-spec`.
I tried making `Config` a `superstruct` too, but getting the automatic decoding to work was a huge pain and was going to require a lot of hacks, so I gave up in favour of keeping the default-based approach we have now.
## Issue Addressed
Resolves#3379
## Proposed Changes
Remove instances of `InvalidTerminalBlock` in lighthouse and use
`Invalid {latest_valid_hash: "0x0000000000000000000000000000000000000000000000000000000000000000"}`
to represent that status.
## Issue Addressed
- Resolves#3266
## Proposed Changes
Return 200 OK rather than an error when a block, attestation or sync message is already known.
Presently, we will log return an error which causes a BN to go "offline" from the VCs perspective which causes the fallback mechanism to do work to try and avoid and upcheck offline nodes. This can be observed as instability in the `vc_beacon_nodes_available_count` metric.
The current behaviour also causes scary logs for the user. There's nothing to *actually* be concerned about when we see duplicate messages, this can happen on fallback systems (see code comments).
## Additional Info
NA
## Issue Addressed
Resolves https://github.com/sigp/lighthouse/issues/3394
Adds a check in `is_healthy` about whether the head is optimistic when choosing whether to use the builder network.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Modifies `lcli skip-slots` and `lcli transition-blocks` allow them to source blocks/states from a beaconAPI and also gives them some more features to assist with benchmarking.
## Additional Info
Breaks the current `lcli skip-slots` and `lcli transition-blocks` APIs by changing some flag names. It should be simple enough to figure out the changes via `--help`.
Currently blocked on #3263.
## Proposed Changes
Update the invalid head tests so that they work with the current default fork choice configuration.
Thanks @realbigsean for fixing the persistence test and the EF tests.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
#3418
## Proposed Changes
- Remove `eth/v2/validator/blinded_blocks/{slot}` as this endpoint does not exist in the spec.
- Return `version` in the `eth/v1/validator/blinded_blocks/{slot}` endpoint.
## Additional Info
Since this removes the `v2` endpoint, this is *technically* a breaking change, but as this does not exist in the spec users may or may not be relying on this.
Depending on what we feel is appropriate, I'm happy to edit this so we keep the `v2` endpoint for now but simply bring the `v1` endpoint in line with `v2`.
## Issue Addressed
A 204 from the connected builder just indicates there's no payload available from the builder, not that there's an issue. So I don't actually think this should be a warn. During the merge transition when we are pre-finalization a 204 will actually be expected. And maybe even longer if the relay chooses to delay providing payloads for a longer period post-merge.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
https://github.com/status-im/nimbus-eth2/issues/3930
## Proposed Changes
We can trivially support beacon nodes which do not provide the `is_optimistic` field by wrapping the field in an `Option`.
## Issue Addressed
NA
## Proposed Changes
There was a regression in #3244 (released in v2.4.0) which stopped pruning fork choice (see [here](https://github.com/sigp/lighthouse/pull/3244#discussion_r935187485)).
This would form a very slow memory leak, using ~100mb per month. The release has been out for ~11 days, so users should not be seeing a dangerous increase in memory, *yet*.
Credits to @michaelsproul for noticing this 🎉
## Additional Info
NA
## Issue Addressed
Fixes an issue identified by @remyroy whereby we were logging a recommendation to use `--eth1-endpoints` on merge-ready setups (when the execution layer was out of sync).
## Proposed Changes
I took the opportunity to clean up the other eth1-related logs, replacing "eth1" by "deposit contract" or "execution" as appropriate.
I've downgraded the severity of the `CRIT` log to `ERRO` and removed most of the recommendation text. The reason being that users lacking an execution endpoint will be informed by the new `WARN Not merge ready` log pre-Bellatrix, or the regular errors from block verification post-Bellatrix.
## Issue Addressed
NA
## Proposed Changes
This PR will make Lighthouse return blocks with invalid payloads via the API with `execution_optimistic = true`. This seems a bit awkward, however I think it's better than returning a 404 or some other error.
Let's consider the case where the only possible head is invalid (#3370 deals with this). In such a scenario all of the duties endpoints will start failing because the head is invalid. I think it would be better if the duties endpoints continue to work, because it's likely that even though the head is invalid the duties are still based upon valid blocks and we want the VC to have them cached. There's no risk to the VC here because we won't actually produce an attestation pointing to an invalid head.
Ultimately, I don't think it's particularly important for us to distinguish between optimistic and invalid blocks on the API. Neither should be trusted and the only *real* reason that we track this is so we can try and fork around the invalid blocks.
## Additional Info
- ~~Blocked on #3370~~
## Issue Addressed
Enable https://github.com/sigp/lighthouse/pull/3322 by default on all networks.
The feature can be opted out of using `--count-unrealized=false` (the CLI flag is updated to take a parameter).
## Issue Addressed
N/A
## Proposed Changes
Uses the `penalize_peer` function added in #3350 in sync methods as well. The existing code in sync methods missed the `ExecutionPayloadError::UnverifiedNonOptimisticCandidate` case.
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
There are scenarios where the only viable head will have an invalid execution payload, in this scenario the `get_head` function on `proto_array` will return an error. We must recover from this scenario by importing blocks from the network.
This PR stops `BeaconChain::recompute_head` from returning an error so that we can't accidentally start down-scoring peers or aborting block import just because the current head has an invalid payload.
## Reviewer Notes
The following changes are included:
1. Allow `fork_choice.get_head` to fail gracefully in `BeaconChain::process_block` when trying to update the `early_attester_cache`; simply don't add the block to the cache rather than aborting the entire process.
1. Don't return an error from `BeaconChain::recompute_head_at_current_slot` and `BeaconChain::recompute_head` to defensively prevent calling functions from aborting any process just because the fork choice function failed to run.
- This should have practically no effect, since most callers were still continuing if recomputing the head failed.
- The outlier is that the API will return 200 rather than a 500 when fork choice fails.
1. Add the `ProtoArrayForkChoice::set_all_blocks_to_optimistic` function to recover from the scenario where we've rebooted and the persisted fork choice has an invalid head.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3241
Closes https://github.com/sigp/lighthouse/issues/3242
## Proposed Changes
* [x] Implement logic to remove equivocating validators from fork choice per https://github.com/ethereum/consensus-specs/pull/2845
* [x] Update tests to v1.2.0-rc.1. The new test which exercises `equivocating_indices` is passing.
* [x] Pull in some SSZ abstractions from the `tree-states` branch that make implementing Vec-compatible encoding for types like `BTreeSet` and `BTreeMap`.
* [x] Implement schema upgrades and downgrades for the database (new schema version is V11).
* [x] Apply attester slashings from blocks to fork choice
## Additional Info
* This PR doesn't need the `BTreeMap` impl, but `tree-states` does, and I don't think there's any harm in keeping it. But I could also be convinced to drop it.
Blocked on #3322.
## Issue Addressed
Resolves#3351
## Proposed Changes
Returns a `ResourceUnavailable` rpc error if we are unable to serve full payloads to blocks by root and range requests because the execution layer is not synced.
## Additional Info
This PR also changes the penalties such that a `ResourceUnavailable` error is only penalized if it is an outgoing request. If we are syncing and aren't getting full block responses, then we don't have use for the peer. However, this might not be true for the incoming request case. We let the peer decide in this case if we are still useful or if we should be banned.
cc @divagant-martian please let me know if i'm missing something here.
## Issue Addressed
Resolves#3151
## Proposed Changes
When fetching duties for sync committee contributions, check the value of `execution_optimistic` of the head block from the BN and refuse to sign any sync committee messages `if execution_optimistic == true`.
## Additional Info
- Is backwards compatible with older BNs
- Finding a way to add test coverage for this would be prudent. Open to suggestions.
## Issue Addressed
As specified in the [Beacon Chain API specs](https://github.com/ethereum/beacon-APIs/blob/master/apis/node/syncing.yaml#L32-L35) we should return `is_optimistic` as part of the response to a query for the `eth/v1/node/syncing` endpoint.
## Proposed Changes
Compute the optimistic status of the head and add it to the `SyncingData` response.
## Issue Addressed
Resolves#3267Resolves#3156
## Proposed Changes
- Move the log for fee recipient checks from proposer cache insertion into block proposal so we are directly checking what we get from the EE
- Only log when there is a discrepancy with the local EE, not when using the builder API. In the `builder-api` branch there is an `info` log when there is a discrepancy, I think it is more likely there will be a difference in fee recipient with the builder api because proposer payments might be made via a transaction in the block. Not really sure what patterns will become commong.
- Upgrade the log from a `warn` to an `error` - not actually sure which we want, but I think this is worth an error because the local EE with default transaction ordering I think should pretty much always use the provided fee recipient
- add a `strict-fee-recipient` flag to the VC so we only sign blocks with matching fee recipients. Falls back from the builder API to the local API if there is a discrepancy .
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
While messing with the deposit snapshot stuff, I had my proxy running and noticed the beacon node wasn't syncing the block cache continuously. There were long periods where it did nothing. I believe this was caused by a logical error introduced in #3234 that dealt with an issue that arose while syncing the block cache on Ropsten.
The problem is that when the block cache is initially syncing, it will trigger the logic that detects the cache is far behind the execution chain in time. This will trigger a batch syncing mechanism which is intended to sync further ahead than the chain would normally. But the batch syncing is actually slower than the range this function usually estimates (in this scenario).
## Proposed Changes
I believe I've fixed this function by taking the end of the range to be the maximum of (batch syncing range, usual range).
I've also renamed and restructured some things a bit. It's equivalent logic but I think it's more clear what's going on.
## Issue Addressed
Add a flag that optionally enables unrealized vote tracking. Would like to test out on testnets and benchmark differences in methods of vote tracking. This PR includes a DB schema upgrade to enable to new vote tracking style.
Co-authored-by: realbigsean <sean@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
#3031
## Proposed Changes
Updates the following API endpoints to conform with https://github.com/ethereum/beacon-APIs/pull/190 and https://github.com/ethereum/beacon-APIs/pull/196
- [x] `beacon/states/{state_id}/root`
- [x] `beacon/states/{state_id}/fork`
- [x] `beacon/states/{state_id}/finality_checkpoints`
- [x] `beacon/states/{state_id}/validators`
- [x] `beacon/states/{state_id}/validators/{validator_id}`
- [x] `beacon/states/{state_id}/validator_balances`
- [x] `beacon/states/{state_id}/committees`
- [x] `beacon/states/{state_id}/sync_committees`
- [x] `beacon/headers`
- [x] `beacon/headers/{block_id}`
- [x] `beacon/blocks/{block_id}`
- [x] `beacon/blocks/{block_id}/root`
- [x] `beacon/blocks/{block_id}/attestations`
- [x] `debug/beacon/states/{state_id}`
- [x] `debug/beacon/heads`
- [x] `validator/duties/attester/{epoch}`
- [x] `validator/duties/proposer/{epoch}`
- [x] `validator/duties/sync/{epoch}`
Updates the following Server-Sent Events:
- [x] `events?topics=head`
- [x] `events?topics=block`
- [x] `events?topics=finalized_checkpoint`
- [x] `events?topics=chain_reorg`
## Backwards Incompatible
There is a very minor breaking change with the way the API now handles requests to `beacon/blocks/{block_id}/root` and `beacon/states/{state_id}/root` when `block_id` or `state_id` is the `Root` variant of `BlockId` and `StateId` respectively.
Previously a request to a non-existent root would simply echo the root back to the requester:
```
curl "http://localhost:5052/eth/v1/beacon/states/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"data":{"root":"0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"}}
```
Now it will return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"code":404,"message":"NOT_FOUND: beacon block with root 0xaaaa…aaaa","stacktraces":[]}
```
In addition to this is the block root `0x0000000000000000000000000000000000000000000000000000000000000000` previously would return the genesis block. It will now return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0x0000000000000000000000000000000000000000000000000000000000000000"
{"code":404,"message":"NOT_FOUND: beacon block with root 0x0000…0000","stacktraces":[]}
```
## Additional Info
- `execution_optimistic` is always set, and will return `false` pre-Bellatrix. I am also open to the idea of doing something like `#[serde(skip_serializing_if = "Option::is_none")]`.
- The value of `execution_optimistic` is set to `false` where possible. Any computation that is reliant on the `head` will simply use the `ExecutionStatus` of the head (unless the head block is pre-Bellatrix).
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3189.
## Proposed Changes
- Always supply the justified block hash as the `safe_block_hash` when calling `forkchoiceUpdated` on the execution engine.
- Refactor the `get_payload` routine to use the new `ForkchoiceUpdateParameters` struct rather than just the `finalized_block_hash`. I think this is a nice simplification and that the old way of computing the `finalized_block_hash` was unnecessary, but if anyone sees reason to keep that approach LMK.
## Issue Addressed
Resolves#3249
## Proposed Changes
Log merge related parameters and EE status in the beacon notifier before the merge.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
* #3344
## Proposed Changes
There are a number of cases during block processing where we might get an `ExecutionPayloadError` but we shouldn't penalize peers. We were forgetting to enumerate all of the non-penalizing errors in every single match statement where we are making that decision. I created a function to make it explicit when we should and should not penalize peers and I used that function in all places where this logic is needed. This way we won't make the same mistake if we add another variant of `ExecutionPayloadError` in the future.
## Issue Addressed
Resolves#3316
## Proposed Changes
This PR fixes an issue where lighthouse created a transition block with `block.execution_payload().timestamp == terminal_block.timestamp` if the terminal block was created at the slot boundary.
## Issue Addressed
N/A
## Proposed Changes
Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.
Adds the merge transition simulation to CI.
Improves some of the functionality around single and parent block lookup.
Gives extra information about whether failures for lookups are related to processing or downloading.
This is entirely untested.
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Resolves#3314
## Proposed Changes
Add a module to encode/decode u256 types according to the execution layer encoding/decoding standards
https://github.com/ethereum/execution-apis/blob/main/src/engine/specification.md#structures
Updates `JsonExecutionPayloadV1.base_fee_per_gas`, `JsonExecutionPayloadHeaderV1.base_fee_per_gas` and `TransitionConfigurationV1.terminal_total_difficulty` to encode/decode according to standards
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Duplicate of #3269. Making this since @divagant-martian opened the previous PR and she can't approve her own PR 😄
Co-authored-by: Diva M <divma@protonmail.com>
