## Issue Addressed
Makes lighthouse compliant with new kzg changes in https://github.com/ethereum/consensus-specs/releases/tag/v1.4.0-beta.3
## Proposed Changes
1. Adds new official trusted setup
2. Refactors kzg to match upstream changes in https://github.com/ethereum/c-kzg-4844/pull/377
3. Updates pre-generated `BlobBundle` to work with official trusted setup. ~~Using json here instead of ssz to account for different value of `MaxBlobCommitmentsPerBlock` in minimal and mainnet. By using json, we can just use one pre generated bundle for both minimal and mainnet. Size of 2 separate ssz bundles is approximately equal to one json bundle cc @jimmygchen~~
Dunno what I was doing, ssz works without any issues
4. Stores trusted_setup as just bytes in eth2_network_config so that we don't have kzg dependency in that lib and in lcli.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
## Issue Addressed
Addresses the recent CI failures caused by caching `blst` for the wrong CPU type.
## Proposed Changes
- Use `FEATURES: jemalloc,portable` when building Lighthouse & `lcli` in tests
- Add a new `TEST_FEATURES` and set to `portable` for all CI test jobs.
- Updated Makefiles to read the `TEST_FEATURES` environment variable, and default to none.
## Issue Addressed
#4512
Which issue # does this PR address?
## Proposed Changes
Add inactivity calculation for Altair
Please list or describe the changes introduced by this PR.
Add inactivity calculation for Altair
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
Co-authored-by: Jimmy Chen <jchen.tc@gmail.com>
## Issue Addressed
Fix a deadlock in the tests that was causing tests on tree-states to run for hours without finishing: https://github.com/sigp/lighthouse/actions/runs/6491194654/job/17628138360.
## Proposed Changes
Avoid using a Mutex under the Rayon `par_iter`. Instead, use an `AtomicUsize`. I've run the new version several times in a loop and it hasn't deadlocked (it was deadlocking consistently on tree-states).
## Additional Info
The same bug exists in unstable and tree-states, but I'm not sure why it was triggering so consistently on the tree-states branch.
## Proposed Changes
Fix the misplacement of the total block production time metric, which occurred during a previous refactor.
Total block production times are no longer skewed low (data from Holesky + blockdreamer):
```
# HELP beacon_block_production_seconds Full runtime of block production
# TYPE beacon_block_production_seconds histogram
beacon_block_production_seconds_bucket{le="0.005"} 0
beacon_block_production_seconds_bucket{le="0.01"} 0
beacon_block_production_seconds_bucket{le="0.025"} 0
beacon_block_production_seconds_bucket{le="0.05"} 0
beacon_block_production_seconds_bucket{le="0.1"} 0
beacon_block_production_seconds_bucket{le="0.25"} 0
beacon_block_production_seconds_bucket{le="0.5"} 37
beacon_block_production_seconds_bucket{le="1"} 65
beacon_block_production_seconds_bucket{le="2.5"} 66
beacon_block_production_seconds_bucket{le="5"} 66
beacon_block_production_seconds_bucket{le="10"} 66
beacon_block_production_seconds_bucket{le="+Inf"} 66
beacon_block_production_seconds_sum 34.225780452
beacon_block_production_seconds_count 66
```
## Additional Info
Cheers to @jimmygchen for helping spot this.
## Issue Addressed
Addresses #4778, and potentially fixes the flaky deneb builder test `builder_works_post_deneb`.
The [deneb builder test](c5c84f1213/beacon_node/http_api/tests/tests.rs (L5371)) has been quite flaky on our CI (`release-tests`) since it was introduced. I'm guessing that it might be timing out on the builder `get_header` call (1 second), and therefore the local payload is used, while the test expects builder payload to be used.
On my machine the [`get_header` ](c5c84f1213/beacon_node/execution_layer/src/test_utils/mock_builder.rs (L367)) call takes about 550ms, which could easily go over 1s on slower environments (our windows CI runner is much slower than the ubuntu one).
I did a profile on the test and it showed that `blob_to_kzg_commiment` and `compute_kzg_proof` was taking a large chunk of time, so perhaps pre-generating the blobs could help stablise this test.
## Proposed Changes
Pre-generate blobs bundle for Mainnet and Minimal presets.
Before the change `get_header` took about **550ms**, and it's now reduced to **50-55ms** after the change. If timeout was indeed the cause of the flaky test, this fix should stablise it. This also brings the flaky `builder_works_post_deneb` test time from 50s to 10s. (8s if we only use a single blob)
* Add `blob_sidecar` event to SSE.
* Return 202 if a block is published but failed blob validation when validation level is `Gossip`.
* Move `BlobSidecar` event to `process_gossip_blob` and add test.
* Emit `BlobSidecar` event when blobs are received over rpc.
* Improve test assertions on `SseBlobSidecar`s.
* Add quotes to blob index serialization in `SseBlobSidecar`
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
---------
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
* Initial Commit of State LRU Cache
* Build State Caches After Reconstruction
* Cleanup Duplicated Code in OverflowLRUCache Tests
* Added Test for State LRU Cache
* Prune Cache of Old States During Maintenance
* Address Michael's Comments
* Few More Comments
* Removed Unused impl
* Last touch up
* Fix Clippy
## Proposed Changes
- only use LH types to avoid build issues
- use warp instead of axum for the server to avoid importing the dep
## Additional Info
- wondering if we can move the `execution_layer/test_utils` to its own crate and import it as a dev dependency
- this would be made easier by separating out our engine API types into their own crate so we can use them in the test crate
- or maybe we can look into using reth types for the engine api if they are in their own crate
Co-authored-by: realbigsean <seananderson33@gmail.com>
* add processing and processed caching to the DA checker
* move processing cache out of critical cache
* get it compiling
* fix lints
* add docs to `AvailabilityView`
* some self review
* fix lints
* fix beacon chain tests
* cargo fmt
* make availability view easier to implement, start on testing
* move child component cache and finish test
* cargo fix
* cargo fix
* cargo fix
* fmt and lint
* make blob commitments not optional, rename some caches, add missing blobs struct
* Update beacon_node/beacon_chain/src/data_availability_checker/processing_cache.rs
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
* marks review feedback and other general cleanup
* cargo fix
* improve availability view docs
* some renames
* some renames and docs
* fix should delay lookup logic
* get rid of some wrapper methods
* fix up single lookup changes
* add a couple docs
* add single blob merge method and improve process_... docs
* update some names
* lints
* fix merge
* remove blob indices from lookup creation log
* remove blob indices from lookup creation log
* delayed lookup logging improvement
* check fork choice before doing any blob processing
* remove unused dep
* Update beacon_node/beacon_chain/src/data_availability_checker/availability_view.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Update beacon_node/beacon_chain/src/data_availability_checker/availability_view.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Update beacon_node/beacon_chain/src/data_availability_checker/availability_view.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Update beacon_node/beacon_chain/src/data_availability_checker/availability_view.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Update beacon_node/network/src/sync/block_lookups/delayed_lookup.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* remove duplicate deps
* use gen range in random blobs geneartor
* rename processing cache fields
* require block root in rpc block construction and check block root consistency
* send peers as vec in single message
* spawn delayed lookup service from network beacon processor
* fix tests
---------
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Start testing blob pruning
* Get rid of unnecessary orphaned blob column
* Make random blob tests deterministic
* Test for pruning being blocked by finality
* Fix bugs and test fork boundary
* A few more tweaks to pruning conditions
* Tweak oldest_blob_slot semantics
* Test margin pruning
* Clean up some terminology and lints
* Schema migrations for v18
* Remove FIXME
* Prune blobs on finalization not every slot
* Fix more bugs + tests
* Address review comments
## Issue Addressed
Synchronize dependencies and edition on the workspace `Cargo.toml`
## Proposed Changes
with https://github.com/rust-lang/cargo/issues/8415 merged it's now possible to synchronize details on the workspace `Cargo.toml` like the metadata and dependencies.
By only having dependencies that are shared between multiple crates aligned on the workspace `Cargo.toml` it's easier to not miss duplicate versions of the same dependency and therefore ease on the compile times.
## Additional Info
this PR also removes the no longer required direct dependency of the `serde_derive` crate.
should be reviewed after https://github.com/sigp/lighthouse/pull/4639 get's merged.
closes https://github.com/sigp/lighthouse/issues/4651
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Closes#4751
## Proposed Changes
Prevent `state_root_at_slot` and `block_root_at_slot` from erroring out due to a call to `self.slot()?` that fails before genesis. This fixes pre-genesis queries for:
- block at slot 0
- block by genesis block root
- state at slot 0
- state by genesis state root
- state at `finalized` tag
- state at `justified` tag
## Proposed Changes
This PR adds more logging prior to genesis, particularly on networks that start with execution enabled.
There are new checks using `eth_getBlockByHash/Number` to verify that the genesis state's `latest_execution_payload_header` matches the execution node's genesis block.
The first commit also runs the merge-readiness/Capella-readiness checks prior to genesis. This has two effects:
- Give more information on the execution node's status and its readiness for genesis.
- Prevent the `el_offline` status from being set on `/eth/v1/node/syncing`, which previously caused the VC to complain loudly.
I would like to include this for the Holesky reboot. It would have caught the misconfig that doomed the first Holesky.
## Additional Info
- Geth doesn't serve payload bodies prior to genesis, which is why we use the legacy methods. I haven't checked with other ELs yet.
- Currently this is logging errors with _Capella_ genesis states generated by `ethereum-genesis-generator` because the `withdrawals_root` is not set correctly (it is 0x0). This is not a blocker for Holesky, as it starts from Bellatrix (Pari is investigating).
## Issue Addressed
I went through the code base and look for places where we acquire fork choice locks (after the deadlock bug was found and fixed in #4687), and discovered an instance where we re-acquire a lock immediately after dropping it. This shouldn't cause deadlock like the other issue, but is slightly less efficient.
## Issue Addressed
CI is plagued by `AddrAlreadyInUse` failures, which are caused by race conditions in allocating free ports.
This PR removes all usages of the `unused_port` crate for Lighthouse's HTTP API, in favour of passing `:0` as the listen address. As a result, the listen address isn't known ahead of time and must be read from the listening socket after it binds. This requires tying some self-referential knots, which is a little disruptive, but hopefully doesn't clash too much with Deneb 🤞
There are still a few usages of `unused_tcp4_port` left in cases where we start external processes, like the `watch` Postgres DB, Anvil, Geth, Nethermind, etc. Removing these usages is non-trivial because it's hard to read the port back from an external process after starting it with `--port 0`. We might be able to do something on Linux where we read from `/proc/`, but I'll leave that for future work.
* move length update outside of if let in LRU cache
* add comment and use hex for G1_POINT_AT_INFINITY
* remove some misleading comments from `ssz_snappy`
* make sure we can't overflow on blobs by range requests with large counts
* downgrade gossip verification internal availability check error
* change blob rpc responses from BlockingFnWithManualSendOnIdle to BlockingFn
* remove unnecessary collect in blobs by range response
* add a comment to blobs by range response start slot logic
* typo persist_data_availabilty_checker -> persist_data_availability_checker
* unify cheap_state_advance_to_obtain_committees
## Issue Addressed
Fix a bug in the storage of the linear block roots array in the freezer DB. Previously this array was always written as part of state storage (or block backfill). With state pruning enabled by #4610, these states were no longer being written and as a result neither were the block roots.
The impact is quite low, we would just log an error when trying to forwards-iterate the block roots, which for validating nodes only happens when they try to look up blocks for peers:
> Aug 25 03:42:36.980 ERRO Missing chunk in forwards iterator chunk index: 49726, service: freezer_db
Any node checkpoint synced off `unstable` is affected and has a corrupt database. If you see the log above, you need to re-sync with the fix. Nodes that haven't checkpoint synced recently should _not_ be corrupted, even if they ran the buggy version.
## Proposed Changes
- Use a `ChunkWriter` to write the block roots when states are not being stored.
- Tweak the usage of `get_latest_restore_point` so that it doesn't return a nonsense value when state pruning is enabled.
- Tweak the guarantee on the block roots array so that block roots are assumed available up to the split slot (exclusive). This is a bit nicer than relying on anything to do with the latest restore point, which is a nonsensical concept when there aren't any restore points.
## Additional Info
I'm looking forward to deleting the chunked vector code for good when we merge tree-states 😁
## Issue Addressed
Closes#3210Closes#3211
## Proposed Changes
- Checkpoint sync from the latest finalized state regardless of its alignment.
- Add the `block_root` to the database's split point. This is _only_ added to the in-memory split in order to avoid a schema migration. See `load_split`.
- Add a new method to the DB called `get_advanced_state`, which looks up a state _by block root_, with a `state_root` as fallback. Using this method prevents accidental accesses of the split's unadvanced state, which does not exist in the hot DB and is not guaranteed to exist in the freezer DB at all. Previously Lighthouse would look up this state _from the freezer DB_, even if it was required for block/attestation processing, which was suboptimal.
- Replace several state look-ups in block and attestation processing with `get_advanced_state` so that they can't hit the split block's unadvanced state.
- Do not store any states in the freezer database by default. All states will be deleted upon being evicted from the hot database unless `--reconstruct-historic-states` is set. The anchor info which was previously used for checkpoint sync is used to implement this, including when syncing from genesis.
## Additional Info
Needs further testing. I want to stress-test the pruned database under Hydra.
The `get_advanced_state` method is intended to become more relevant over time: `tree-states` includes an identically named method that returns advanced states from its in-memory cache.
Co-authored-by: realbigsean <seananderson33@gmail.com>
* remove protoc and token from network tests github action
* delete unused beacon chain methods
* downgrade writing blobs to store log
* reduce diff in block import logic
* remove some todo's and deneb built in network
* remove unnecessary error, actually use some added metrics
* remove some metrics, fix missing components on publish funcitonality
* fix status tests
* rename sidecar by root to blobs by root
* clean up some metrics
* remove unnecessary feature gate from attestation subnet tests, clean up blobs by range response code
* pawan's suggestion in `protocol_info`, peer score in matching up batch sync block and blobs
* fix range tests for deneb
* pub block and blob db cache behind the same mutex
* remove unused errs and an empty file
* move sidecar trait to new file
* move types from payload to eth2 crate
* update comment and add flag value name
* make function private again, remove allow unused
* use reth rlp for tx decoding
* fix compile after merge
* rename kzg commitments
* cargo fmt
* remove unused dep
* Update beacon_node/execution_layer/src/lib.rs
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Update beacon_node/beacon_processor/src/lib.rs
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* pawan's suggestiong for vec capacity
* cargo fmt
* Revert "use reth rlp for tx decoding"
This reverts commit 5181837d81c66dcca4c960a85989ac30c7f806e2.
* remove reth rlp
---------
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Update mock builder, mev-rs dependencies, eth2 lib to support deneb builder flow
* Replace `sharingForkTime` with `cancunTime`
* Patch `ethereum-consensus` to include some deneb-devnet-8 changes
* Add deneb builder test and fix block contents deserialization
* Fix builder bid encoding issue and passing deneb builder test \o/
* Fix test compilation
* Revert `cancunTime` change in genesis to pass doppelganger tests
## Issue Addressed
Closes#4245
## Proposed Changes
- If an SSE channel fills up, send a comment instead of terminating the stream.
- Add a CLI flag for scaling up the SSE buffer: `--http-sse-capacity-multiplier N`.
## Additional Info
~~Blocked on #4462. I haven't rebased on that PR yet for initial testing, because it still needs some more work to handle long-running HTTP threads.~~
- [x] Add CLI flag tests.
## Issue Addressed
NA
## Proposed Changes
Rather than spawning new tasks on the tokio executor to process each HTTP API request, send the tasks to the `BeaconProcessor`. This achieves:
1. Places a bound on how many concurrent requests are being served (i.e., how many we are actually trying to compute at one time).
1. Places a bound on how many requests can be awaiting a response at one time (i.e., starts dropping requests when we have too many queued).
1. Allows the BN prioritise HTTP requests with respect to messages coming from the P2P network (i.e., proiritise importing gossip blocks rather than serving API requests).
Presently there are two levels of priorities:
- `Priority::P0`
- The beacon processor will prioritise these above everything other than importing new blocks.
- Roughly all validator-sensitive endpoints.
- `Priority::P1`
- The beacon processor will prioritise practically all other P2P messages over these, except for historical backfill things.
- Everything that's not `Priority::P0`
The `--http-enable-beacon-processor false` flag can be supplied to revert back to the old behaviour of spawning new `tokio` tasks for each request:
```
--http-enable-beacon-processor <BOOLEAN>
The beacon processor is a scheduler which provides quality-of-service and DoS protection. When set to
"true", HTTP API requests will queued and scheduled alongside other tasks. When set to "false", HTTP API
responses will be executed immediately. [default: true]
```
## New CLI Flags
I added some other new CLI flags:
```
--beacon-processor-aggregate-batch-size <INTEGER>
Specifies the number of gossip aggregate attestations in a signature verification batch. Higher values may
reduce CPU usage in a healthy network while lower values may increase CPU usage in an unhealthy or hostile
network. [default: 64]
--beacon-processor-attestation-batch-size <INTEGER>
Specifies the number of gossip attestations in a signature verification batch. Higher values may reduce CPU
usage in a healthy network whilst lower values may increase CPU usage in an unhealthy or hostile network.
[default: 64]
--beacon-processor-max-workers <INTEGER>
Specifies the maximum concurrent tasks for the task scheduler. Increasing this value may increase resource
consumption. Reducing the value may result in decreased resource usage and diminished performance. The
default value is the number of logical CPU cores on the host.
--beacon-processor-reprocess-queue-len <INTEGER>
Specifies the length of the queue for messages requiring delayed processing. Higher values may prevent
messages from being dropped while lower values may help protect the node from becoming overwhelmed.
[default: 12288]
```
I needed to add the max-workers flag since the "simulator" flavor tests started failing with HTTP timeouts on the test assertions. I believe they were failing because the Github runners only have 2 cores and there just weren't enough workers available to process our requests in time. I added the other flags since they seem fun to fiddle with.
## Additional Info
I bumped the timeouts on the "simulator" flavor test from 4s to 8s. The prioritisation of consensus messages seems to be causing slower responses, I guess this is what we signed up for 🤷
The `validator/register` validator has some special handling because the relays have a bad habit of timing out on these calls. It seems like a waste of a `BeaconProcessor` worker to just wait for the builder API HTTP response, so we spawn a new `tokio` task to wait for a builder response.
I've added an optimisation for the `GET beacon/states/{state_id}/validators/{validator_id}` endpoint in [efbabe3](efbabe3252). That's the endpoint the VC uses to resolve pubkeys to validator indices, and it's the endpoint that was causing us grief. Perhaps I should move that into a new PR, not sure.
* remove closure from `check_availability_mayb_import`
* impove logging, add wrapper struct to requested ids
* improve logging
* only log if we're in deneb. Only delay lookup if we're in deneb
* fix bug in missing components check
