This PR adds the ability to read the Lighthouse logs from the HTTP API for both the BN and the VC.
This is done in such a way to as minimize any kind of performance hit by adding this feature.
The current design creates a tokio broadcast channel and mixes is into a form of slog drain that combines with our main global logger drain, only if the http api is enabled.
The drain gets the logs, checks the log level and drops them if they are below INFO. If they are INFO or higher, it sends them via a broadcast channel only if there are users subscribed to the HTTP API channel. If not, it drops the logs.
If there are more than one subscriber, the channel clones the log records and converts them to json in their independent HTTP API tasks.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Adds metrics to track validators that are submitting equivocating (but not slashable) sync messages. This follows on from some research we've been doing in a separate fork of LH.
## Additional Info
@jimmygchen and @michaelsproul have already run their eyes over this so it should be easy to get into v4.2.0, IMO.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/4291, part of #3613.
## Proposed Changes
- Implement the `el_offline` field on `/eth/v1/node/syncing`. We set `el_offline=true` if:
- The EL's internal status is `Offline` or `AuthFailed`, _or_
- The most recent call to `newPayload` resulted in an error (more on this in a moment).
- Use the `el_offline` field in the VC to mark nodes with offline ELs as _unsynced_. These nodes will still be used, but only after synced nodes.
- Overhaul the usage of `RequireSynced` so that `::No` is used almost everywhere. The `--allow-unsynced` flag was broken and had the opposite effect to intended, so it has been deprecated.
- Add tests for the EL being offline on the upcheck call, and being offline due to the newPayload check.
## Why track `newPayload` errors?
Tracking the EL's online/offline status is too coarse-grained to be useful in practice, because:
- If the EL is timing out to some calls, it's unlikely to timeout on the `upcheck` call, which is _just_ `eth_syncing`. Every failed call is followed by an upcheck [here](693886b941/beacon_node/execution_layer/src/engines.rs (L372-L380)), which would have the effect of masking the failure and keeping the status _online_.
- The `newPayload` call is the most likely to time out. It's the call in which ELs tend to do most of their work (often 1-2 seconds), with `forkchoiceUpdated` usually returning much faster (<50ms).
- If `newPayload` is failing consistently (e.g. timing out) then this is a good indication that either the node's EL is in trouble, or the network as a whole is. In the first case validator clients _should_ prefer other BNs if they have one available. In the second case, all of their BNs will likely report `el_offline` and they'll just have to proceed with trying to use them.
## Additional Changes
- Add utility method `ForkName::latest` which is quite convenient for test writing, but probably other things too.
- Delete some stale comments from when we used to support multiple execution nodes.
## Issue Addressed
#4233
## Proposed Changes
Remove the `best_justified_checkpoint` from the `PersistedForkChoiceStore` type as it is now unused.
Additionally, remove the `Option`'s wrapping the `justified_checkpoint` and `finalized_checkpoint` fields on `ProtoNode` which were only present to facilitate a previous migration.
Include the necessary code to facilitate the migration to a new DB schema.
## Issue Addressed
N/A
## Proposed Changes
Adds a flag for disabling peer scoring. This is useful for local testing and testing small networks for new features.
> This is currently a WIP and all features are subject to alteration or removal at any time.
## Overview
The successor to #2873.
Contains the backbone of `beacon.watch` including syncing code, the initial API, and several core database tables.
See `watch/README.md` for more information, requirements and usage.
## Issue Addressed
#3708
## Proposed Changes
- Add `is_finalized_block` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `is_finalized_state` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `fork_and_execution_optimistic_and_finalized` in `beacon_node/http_api/src/state_id.rs`.
- Add `ExecutionOptimisticFinalizedForkVersionedResponse` type in `consensus/types/src/fork_versioned_response.rs`.
- Add `execution_optimistic_finalized_fork_versioned_response`function in `beacon_node/http_api/src/version.rs`.
- Add `ExecutionOptimisticFinalizedResponse` type in `common/eth2/src/types.rs`.
- Add `add_execution_optimistic_finalized` method in `common/eth2/src/types.rs`.
- Update API response methods to include finalized.
- Remove `execution_optimistic_fork_versioned_response`
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Which issue # does this PR address?
https://github.com/sigp/lighthouse/issues/3669
## Proposed Changes
Please list or describe the changes introduced by this PR.
- A new API to fetch fork choice data, as specified [here](https://github.com/ethereum/beacon-APIs/pull/232)
- A new integration test to test the new API
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
- `extra_data` field specified in the beacon-API spec is not implemented, please let me know if I should instead.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* rename 4844 to deneb
* rename 4844 to deneb
* move excess data gas field
* get EF tests working
* fix ef tests lint
* fix the blob identifier ef test
* fix accessed files ef test script
* get beacon chain tests passing
* introduce availability pending block
* add intoavailableblock trait
* small fixes
* add 'gossip blob cache' and start to clean up processing and transition types
* shard memory blob cache
* Initial commit
* Fix after rebase
* Add gossip verification conditions
* cache cleanup
* general chaos
* extended chaos
* cargo fmt
* more progress
* more progress
* tons of changes, just tryna compile
* everything, everywhere, all at once
* Reprocess an ExecutedBlock on unavailable blobs
* Add sus gossip verification for blobs
* Merge stuff
* Remove reprocessing cache stuff
* lint
* Add a wrapper to allow construction of only valid `AvailableBlock`s
* rename blob arc list to blob list
* merge cleanuo
* Revert "merge cleanuo"
This reverts commit 5e98326878c77528d0c4668c5a4db4a4b0fbaeaa.
* Revert "Revert "merge cleanuo""
This reverts commit 3a4009443a5812b3028abe855079307436dc5419.
* fix rpc methods
* move beacon block and blob to eth2/types
* rename gossip blob cache to data availability checker
* lots of changes
* fix some compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* cargo fmt
* use a common data structure for block import types
* fix availability check on proposal import
* refactor the blob cache and split the block wrapper into two types
* add type conversion for signed block and block wrapper
* fix beacon chain tests and do some renaming, add some comments
* Partial processing (#4)
* move beacon block and blob to eth2/types
* rename gossip blob cache to data availability checker
* lots of changes
* fix some compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* cargo fmt
* use a common data structure for block import types
* fix availability check on proposal import
* refactor the blob cache and split the block wrapper into two types
* add type conversion for signed block and block wrapper
* fix beacon chain tests and do some renaming, add some comments
* cargo update (#6)
---------
Co-authored-by: realbigsean <sean@sigmaprime.io>
Co-authored-by: realbigsean <seananderson33@gmail.com>
* Update get blobs endpoint to return BlobSidecarList
* Update code comment
* Update blob retrieval to return BlobSidecarList without Arc
* Remove usage of BlobSidecarList type alias to avoid code conflicts
* Add clippy allow exception
This PR enables the user to adjust the shuffling cache size.
This is useful for some HTTP API requests which require re-computing old shufflings. This PR currently optimizes the
beacon/states/{state_id}/committees HTTP API by first checking the cache before re-building shuffling.
If the shuffling is set to a non-default value, then the HTTP API request will also fill the cache when as it constructs new shufflings.
If the CLI flag is not present or the value is set to the default of 16 the default behaviour is observed.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
When producing a block from a builder, there are two points where we could consider the block "broadcast":
1. When the blinded block is published to the builder.
2. When the un-blinded block is published to the P2P network (this is always *after* the previous step).
Our logging for late block broadcasts was using (2) for builder-blocks, which was creating a lot of false-positive logs. This is because the builder publishes the block on the P2P network themselves before returning it to us and we perform (2). For clarity, the logs were false-positives because we claim that the block was published late by us when it was actually published earlier by the builder.
This PR changes our logging behavior so we do our logging at (1) instead. It also updates our metrics for block broadcast to distinguish between local and builder blocks. I believe the metrics change will be natively compatible with existing Grafana dashboards.
## Additional Info
One could argue that the builder *should* return the block to us faster, however that's not the case. I think it's more important that we don't desensitize users with false-positives.
## Proposed Changes
Two tiny updates to satisfy Clippy 1.68
Plus refactoring of the `http_api` into less complex types so the compiler can chew and digest them more easily.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* wip
* fix router
* arc the byroot responses we send
* add placeholder for blob verification
* respond to blobs by range and blobs by root request in the most horrible and gross way ever
* everything in sync is now unimplemented
* fix compiation issues
* http_pi change is very small, just add it
* remove ctrl-c ctrl-v's docs
## Issue Addressed
Closes#3896Closes#3998Closes#3700
## Proposed Changes
- Optimise the calculation of withdrawals for payload attributes by avoiding state clones, avoiding unnecessary state advances and reading from the snapshot cache if possible.
- Use the execution layer's payload attributes cache to avoid re-calculating payload attributes. I actually implemented a new LRU cache just for withdrawals but it had the exact same key and most of the same data as the existing payload attributes cache, so I deleted it.
- Add a new SSE event that fires when payloadAttributes are calculated. This is useful for block builders, a la https://github.com/ethereum/beacon-APIs/issues/244.
- Add a new CLI flag `--always-prepare-payload` which forces payload attributes to be sent with every fcU regardless of connected proposers. This is intended for use by builders/relays.
For maximum effect, the flags I've been using to run Lighthouse in "payload builder mode" are:
```
--always-prepare-payload \
--prepare-payload-lookahead 12000 \
--suggested-fee-recipient 0x0000000000000000000000000000000000000000
```
The fee recipient is required so Lighthouse has something to pack in the payload attributes (it can be ignored by the builder). The lookahead causes fcU to be sent at the start of every slot rather than at 8s. As usual, fcU will also be sent after each change of head block. I think this combination is sufficient for builders to build on all viable heads. Often there will be two fcU (and two payload attributes) sent for the same slot: one sent at the start of the slot with the head from `n - 1` as the parent, and one sent after the block arrives with `n` as the parent.
Example usage of the new event stream:
```bash
curl -N "http://localhost:5052/eth/v1/events?topics=payload_attributes"
```
## Additional Info
- [x] Tests added by updating the proposer re-org tests. This has the benefit of testing the proposer re-org code paths with withdrawals too, confirming that the new changes don't interact poorly.
- [ ] Benchmarking with `blockdreamer` on devnet-7 showed promising results but I'm yet to do a comparison to `unstable`.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Cleans up all the remnants of 4844 in capella. This makes sure when 4844 is reviewed there is nothing we are missing because it got included here
## Proposed Changes
drop a bomb on every 4844 thing
## Additional Info
Merge process I did (locally) is as follows:
- squash merge to produce one commit
- in new branch off unstable with the squashed commit create a `git revert HEAD` commit
- merge that new branch onto 4844 with `--strategy ours`
- compare local 4844 to remote 4844 and make sure the diff is empty
- enjoy
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Adds two new `DEBG` logs to the HTTP API:
1. As soon as we are requested to produce a block.
2. As soon as a signed block is received.
In #3858 we added some very helpful logs to the VC so we could see when things are happening with block proposals in the VC. After doing some more debugging, I found that I can tell when the VC is sending a block but I *can't* tell the time that the BN receives it (I can only get the time after the BN has started doing some work with the block). Knowing when the VC published and as soon as the BN receives is useful for determining the delays introduced by network latency (and some other things like JSON decoding, etc).
## Additional Info
NA
## Issue Addressed
#3804
## Proposed Changes
- Add `total_balance` to the validator monitor and adjust the number of historical epochs which are cached.
- Allow certain values in the cache to be served out via the HTTP API without requiring a state read.
## Usage
```
curl -X POST "http://localhost:5052/lighthouse/ui/validator_info" -d '{"indices": [0]}' -H "Content-Type: application/json" | jq
```
```
{
"data": {
"validators": {
"0": {
"info": [
{
"epoch": 172981,
"total_balance": 36566388519
},
...
{
"epoch": 172990,
"total_balance": 36566496513
}
]
},
"1": {
"info": [
{
"epoch": 172981,
"total_balance": 36355797968
},
...
{
"epoch": 172990,
"total_balance": 36355905962
}
]
}
}
}
}
```
## Additional Info
This requires no historical states to operate which mean it will still function on the freshly checkpoint synced node, however because of this, the values will populate each epoch (up to a maximum of 10 entries).
Another benefit of this method, is that we can easily cache any other values which would normally require a state read and serve them via the same endpoint. However, we would need be cautious about not overly increasing block processing time by caching values from complex computations.
This also caches some of the validator metrics directly, rather than pulling them from the Prometheus metrics when the API is called. This means when the validator count exceeds the individual monitor threshold, the cached values will still be available.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Our `ERRO` stream has been rather noisy since the merge due to some unexpected behaviours of builders and EEs. Now that we've been running post-merge for a while, I think we can drop some of these `ERRO` to `WARN` so we're not "crying wolf".
The modified logs are:
#### `ERRO Execution engine call failed`
I'm seeing this quite frequently on Geth nodes. They seem to timeout when they're busy and it rarely indicates a serious issue. We also have logging across block import, fork choice updating and payload production that raise `ERRO` or `CRIT` when the EE times out, so I think we're not at risk of silencing actual issues.
#### `ERRO "Builder failed to reveal payload"`
In #3775 we reduced this log from `CRIT` to `ERRO` since it's common for builders to fail to reveal the block to the producer directly whilst still broadcasting it to the networ. I think it's worth dropping this to `WARN` since it's rarely interesting.
I elected to stay with `WARN` since I really do wish builders would fulfill their API promises by returning the block to us. Perhaps I'm just being pedantic here, I could be convinced otherwise.
#### `ERRO "Relay error when registering validator(s)"`
It seems like builders and/or mev-boost struggle to handle heavy loads of validator registrations. I haven't observed issues with validators not actually being registered, but I see timeouts on these endpoints many times a day. It doesn't seem like this `ERRO` is worth it.
#### `ERRO Error fetching block for peer ExecutionLayerErrorPayloadReconstruction`
This means we failed to respond to a peer on the P2P network with a block they requested because of an error in the `execution_layer`. It's very common to see timeouts or incomplete responses on this endpoint whilst the EE is busy and I don't think it's important enough for an `ERRO`. As long as the peer count stays high, I don't think the user needs to be actively concerned about how we're responding to peers.
## Additional Info
NA
* Add first efforts at broadcast
* Tidy
* Move broadcast code to client
* Progress with broadcast impl
* Rename to address change
* Fix compile errors
* Use `while` loop
* Tidy
* Flip broadcast condition
* Switch to forgetting individual indices
* Always broadcast when the node starts
* Refactor into two functions
* Add testing
* Add another test
* Tidy, add more testing
* Tidy
* Add test, rename enum
* Rename enum again
* Tidy
* Break loop early
* Add V15 schema migration
* Bump schema version
* Progress with migration
* Update beacon_node/client/src/address_change_broadcast.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Fix typo in function name
---------
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Import BLS to execution changes before Capella
* Test for BLS to execution change HTTP API
* Pack BLS to execution changes in LIFO order
* Remove unused var
* Clippy
Issue #3112
Add `Filter::recover` to the GET chain to handle rejections specifically as 404 NOT FOUND
Making a request to `http://localhost:5052/not_real` now returns the following:
```
{
"code": 404,
"message": "NOT_FOUND",
"stacktraces": []
}
```
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Import BLS to execution changes before Capella
* Test for BLS to execution change HTTP API
* Pack BLS to execution changes in LIFO order
* Remove unused var
* Clippy
## Issue Addressed
Issue #3112
## Proposed Changes
Add `Filter::recover` to the GET chain to handle rejections specifically as 404 NOT FOUND
## Additional Info
Making a request to `http://localhost:5052/not_real` now returns the following:
```
{
"code": 404,
"message": "NOT_FOUND",
"stacktraces": []
}
```
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
In #3725 I introduced a `CRIT` log for unrevealed payloads, against @michaelsproul's [advice](https://github.com/sigp/lighthouse/pull/3725#discussion_r1034142113). After being woken up in the middle of the night by a block that was not revealed to the BN but *was* revealed to the network, I have capitulated. This PR implements @michaelsproul's suggestion and reduces the severity to `ERRO`.
Additionally, I have dropped a `CRIT` to an `ERRO` for when a block is published late. The block in question was indeed published late on the network, however now that we have builders that can slow down block production I don't think the error is "actionable" enough to warrant a `CRIT` for the user.
## Additional Info
NA
## Issue Addressed
#3724
## Proposed Changes
Exposes certain `validator_monitor` as an endpoint on the HTTP API. Will only return metrics for validators which are actively being monitored.
### Usage
```bash
curl -X GET "http://localhost:5052/lighthouse/ui/validator_metrics" -H "accept: application/json" | jq
```
```json
{
"data": {
"validators": {
"12345": {
"attestation_hits": 10,
"attestation_misses": 0,
"attestation_hit_percentage": 100,
"attestation_head_hits": 10,
"attestation_head_misses": 0,
"attestation_head_hit_percentage": 100,
"attestation_target_hits": 5,
"attestation_target_misses": 5,
"attestation_target_hit_percentage": 50
}
}
}
}
```
## Additional Info
Based on #3756 which should be merged first.
* Add API endpoint to count statuses of all validators (#3756)
* Delete DB schema migrations for v11 and earlier (#3761)
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
#3724
## Proposed Changes
Adds an endpoint to quickly count the number of occurances of each status in the validator set.
## Usage
```bash
curl -X GET "http://localhost:5052/lighthouse/ui/validator_count" -H "accept: application/json" | jq
```
```json
{
"data": {
"active_ongoing":479508,
"active_exiting":0,
"active_slashed":0,
"pending_initialized":28,
"pending_queued":0,
"withdrawal_possible":933,
"withdrawal_done":0,
"exited_unslashed":0,
"exited_slashed":3
}
}
```
## Issue Addressed
#3704
## Proposed Changes
Adds is_syncing_finalized: bool parameter for block verification functions. Sets the payload_verification_status to Optimistic if is_syncing_finalized is true. Uses SyncState in NetworkGlobals in BeaconProcessor to retrieve the syncing status.
## Additional Info
I could implement FinalizedSignatureVerifiedBlock if you think it would be nicer.
This PR adds some health endpoints for the beacon node and the validator client.
Specifically it adds the endpoint:
`/lighthouse/ui/health`
These are not entirely stable yet. But provide a base for modification for our UI.
These also may have issues with various platforms and may need modification.
## Issue Addressed
NA
## Proposed Changes
Adds clarification to an error log when there is an error submitting a validator registration.
There seems to be a few cases where relays return errors during validator registration, including spurious timeouts and when a validator has been very recently activated/made pending.
Changing this log helps indicate that it's "just another registration error" rather than something more serious. I didn't drop this to a `WARN` since I still have hope we can eliminate these errors completely by chatting with relays and adjusting timeouts.
## Additional Info
NA
## Issue Addressed
New lints for rust 1.65
## Proposed Changes
Notable change is the identification or parameters that are only used in recursion
## Additional Info
na
## Summary
The deposit cache now has the ability to finalize deposits. This will cause it to drop unneeded deposit logs and hashes in the deposit Merkle tree that are no longer required to construct deposit proofs. The cache is finalized whenever the latest finalized checkpoint has a new `Eth1Data` with all deposits imported.
This has three benefits:
1. Improves the speed of constructing Merkle proofs for deposits as we can just replay deposits since the last finalized checkpoint instead of all historical deposits when re-constructing the Merkle tree.
2. Significantly faster weak subjectivity sync as the deposit cache can be transferred to the newly syncing node in compressed form. The Merkle tree that stores `N` finalized deposits requires a maximum of `log2(N)` hashes. The newly syncing node then only needs to download deposits since the last finalized checkpoint to have a full tree.
3. Future proofing in preparation for [EIP-4444](https://eips.ethereum.org/EIPS/eip-4444) as execution nodes will no longer be required to store logs permanently so we won't always have all historical logs available to us.
## More Details
Image to illustrate how the deposit contract merkle tree evolves and finalizes along with the resulting `DepositTreeSnapshot`
## Other Considerations
I've changed the structure of the `SszDepositCache` so once you load & save your database from this version of lighthouse, you will no longer be able to load it from older versions.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
* add capella gossip boiler plate
* get everything compiling
Co-authored-by: realbigsean <sean@sigmaprime.io
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
* small cleanup
* small cleanup
* cargo fix + some test cleanup
* improve block production
* add fixme for potential panic
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
This reverts commit ca9dc8e094 (PR #3559) with some modifications.
## Proposed Changes
Unfortunately that PR introduced a performance regression in fork choice. The optimisation _intended_ to build the exit and pubkey caches on the head state _only if_ they were not already built. However, due to the head state always being cloned without these caches, we ended up building them every time the head changed, leading to a ~70ms+ penalty on mainnet.
fcfd02aeec/beacon_node/beacon_chain/src/canonical_head.rs (L633-L636)
I believe this is a severe enough regression to justify immediately releasing v3.2.1 with this change.
## Additional Info
I didn't fully revert #3559, because there were some unrelated deletions of dead code in that PR which I figured we may as well keep.
An alternative would be to clone the extra caches, but this likely still imposes some cost, so in the interest of applying a conservative fix quickly, I think reversion is the best approach. The optimisation from #3559 was not even optimising a particularly significant path, it was mostly for VCs running larger numbers of inactive keys. We can re-do it in the `tree-states` world where cache clones are cheap.
## Issue Addressed
While digging around in some logs I noticed that queries for validators by pubkey were taking 10ms+, which seemed too long. This was due to a loop through the entire validator registry for each lookup.
## Proposed Changes
Rather than using a loop through the register, this PR utilises the pubkey cache which is usually initialised at the head*. In case the cache isn't built, we fall back to the previous loop logic. In the vast majority of cases I expect the cache will be built, as the validator client queries at the `head` where all caches should be built.
## Additional Info
*I had to modify the cache build that runs after fork choice to build the pubkey cache. I think it had been optimised out, perhaps accidentally. I think it's preferable to have the exit cache and the pubkey cache built on the head state, as they are required for verifying deposits and exits respectively, and we may as well build them off the hot path of block processing. Previously they'd get built the first time a deposit or exit needed to be verified.
I've deleted the unused `map_state` function which was obsoleted by `map_state_and_execution_optimistic`.
## Issue Addressed
fixes lints from the last rust release
## Proposed Changes
Fix the lints, most of the lints by `clippy::question-mark` are false positives in the form of https://github.com/rust-lang/rust-clippy/issues/9518 so it's allowed for now
## Additional Info
## Issue Addressed
NA
## Proposed Changes
This PR removes duplicated block root computation.
Computing the `SignedBeaconBlock::canonical_root` has become more expensive since the merge as we need to compute the merke root of each transaction inside an `ExecutionPayload`.
Computing the root for [a mainnet block](https://beaconcha.in/slot/4704236) is taking ~10ms on my i7-8700K CPU @ 3.70GHz (no sha extensions). Given that our median seen-to-imported time for blocks is presently 300-400ms, removing a few duplicated block roots (~30ms) could represent an easy 10% improvement. When we consider that the seen-to-imported times include operations *after* the block has been placed in the early attester cache, we could expect the 30ms to be more significant WRT our seen-to-attestable times.
## Additional Info
NA
## Issue Addressed
https://github.com/ethereum/beacon-APIs/pull/222
## Proposed Changes
Update Lighthouse's randao verification API to match the `beacon-APIs` spec. We implemented the API before spec stabilisation, and it changed slightly in the course of review.
Rather than a flag `verify_randao` taking a boolean value, the new API uses a `skip_randao_verification` flag which takes no argument. The new spec also requires the randao reveal to be present and equal to the point-at-infinity when `skip_randao_verification` is set.
I've also updated the `POST /lighthouse/analysis/block_rewards` API to take blinded blocks as input, as the execution payload is irrelevant and we may want to assess blocks produced by builders.
## Additional Info
This is technically a breaking change, but seeing as I suspect I'm the only one using these parameters/APIs, I think we're OK to include this in a patch release.
## Issue Addressed
When requesting an index which is not active during `start_epoch`, Lighthouse returns:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/999999999?start_epoch=100000&end_epoch=100000"
```
```json
{
"code": 500,
"message": "INTERNAL_SERVER_ERROR: ParticipationCache(InvalidValidatorIndex(999999999))",
"stacktraces": []
}
```
This error occurs even when the index in question becomes active before `end_epoch` which is undesirable as it can prevent larger queries from completing.
## Proposed Changes
In the event the index is out-of-bounds (has not yet been activated), simply return all fields as `false`:
```
-> curl "http://localhost:5052/lighthouse/analysis/attestation_performance/999999999?start_epoch=100000&end_epoch=100000"
```
```json
[
{
"index": 999999999,
"epochs": {
"100000": {
"active": false,
"head": false,
"target": false,
"source": false
}
}
}
]
```
By doing this, we cover the case where a validator becomes active sometime between `start_epoch` and `end_epoch`.
## Additional Info
Note that this error only occurs for epochs after the Altair hard fork.
## Issue Addressed
NA
## Proposed Changes
As we've seen on Prater, there seems to be a correlation between these messages
```
WARN Not enough time for a discovery search subnet_id: ExactSubnet { subnet_id: SubnetId(19), slot: Slot(3742336) }, service: attestation_service
```
... and nodes falling 20-30 slots behind the head for short periods. These nodes are running ~20k Prater validators.
After running some metrics, I can see that the `network_recv` channel is processing ~250k `AttestationSubscribe` messages per minute. It occurred to me that perhaps the `AttestationSubscribe` messages are "washing out" the `SendRequest` and `SendResponse` messages. In this PR I separate the `AttestationSubscribe` and `SyncCommitteeSubscribe` messages into their own queue so the `tokio::select!` in the `NetworkService` can still process the other messages in the `network_recv` channel without necessarily having to clear all the subscription messages first.
~~I've also added filter to the HTTP API to prevent duplicate subscriptions going to the network service.~~
## Additional Info
- Currently being tested on Prater
## Proposed Changes
This PR has two aims: to speed up attestation packing in the op pool, and to fix bugs in the verification of attester slashings, proposer slashings and voluntary exits. The changes are bundled into a single database schema upgrade (v12).
Attestation packing is sped up by removing several inefficiencies:
- No more recalculation of `attesting_indices` during packing.
- No (unnecessary) examination of the `ParticipationFlags`: a bitfield suffices. See `RewardCache`.
- No re-checking of attestation validity during packing: the `AttestationMap` provides attestations which are "correct by construction" (I have checked this using Hydra).
- No SSZ re-serialization for the clunky `AttestationId` type (it can be removed in a future release).
So far the speed-up seems to be roughly 2-10x, from 500ms down to 50-100ms.
Verification of attester slashings, proposer slashings and voluntary exits is fixed by:
- Tracking the `ForkVersion`s that were used to verify each message inside the `SigVerifiedOp`. This allows us to quickly re-verify that they match the head state's opinion of what the `ForkVersion` should be at the epoch(s) relevant to the message.
- Storing the `SigVerifiedOp` on disk rather than the raw operation. This allows us to continue track the fork versions after a reboot.
This is mostly contained in this commit 52bb1840ae5c4356a8fc3a51e5df23ed65ed2c7f.
## Additional Info
The schema upgrade uses the justified state to re-verify attestations and compute `attesting_indices` for them. It will drop any attestations that fail to verify, by the logic that attestations are most valuable in the few slots after they're observed, and are probably stale and useless by the time a node restarts. Exits and proposer slashings and similarly re-verified to obtain `SigVerifiedOp`s.
This PR contains a runtime killswitch `--paranoid-block-proposal` which opts out of all the optimisations in favour of closely verifying every included message. Although I'm quite sure that the optimisations are correct this flag could be useful in the event of an unforeseen emergency.
Finally, you might notice that the `RewardCache` appears quite useless in its current form because it is only updated on the hot-path immediately before proposal. My hope is that in future we can shift calls to `RewardCache::update` into the background, e.g. while performing the state advance. It is also forward-looking to `tree-states` compatibility, where iterating and indexing `state.{previous,current}_epoch_participation` is expensive and needs to be minimised.
## Issue Addressed
#3465
## Proposed Changes
Filter out any validator registrations for validators that are not `active` or `pending`. I'm adding this filtering the beacon node because all the information is readily available there. In other parts of the VC we are usually sending per-validator requests based on duties from the BN. And duties will only be provided for active validators so we don't have this type of filtering elsewhere in the VC.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
Fix clippy lints for latest rust version 1.63. I have allowed the [derive_partial_eq_without_eq](https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq) lint as satisfying this lint would result in more code that we might not want and I feel it's not required.
Happy to fix this lint across lighthouse if required though.
## Issue Addressed
Resolves#3388Resolves#2638
## Proposed Changes
- Return the `BellatrixPreset` on `/eth/v1/config/spec` by default.
- Allow users to opt out of this by providing `--http-spec-fork=altair` (unless there's a Bellatrix fork epoch set).
- Add the Altair constants from #2638 and make serving the constants non-optional (the `http-disable-legacy-spec` flag is deprecated).
- Modify the VC to only read the `Config` and not to log extra fields. This prevents it from having to muck around parsing the `ConfigAndPreset` fields it doesn't need.
## Additional Info
This change is backwards-compatible for the VC and the BN, but is marked as a breaking change for the removal of `--http-disable-legacy-spec`.
I tried making `Config` a `superstruct` too, but getting the automatic decoding to work was a huge pain and was going to require a lot of hacks, so I gave up in favour of keeping the default-based approach we have now.
## Issue Addressed
- Resolves#3266
## Proposed Changes
Return 200 OK rather than an error when a block, attestation or sync message is already known.
Presently, we will log return an error which causes a BN to go "offline" from the VCs perspective which causes the fallback mechanism to do work to try and avoid and upcheck offline nodes. This can be observed as instability in the `vc_beacon_nodes_available_count` metric.
The current behaviour also causes scary logs for the user. There's nothing to *actually* be concerned about when we see duplicate messages, this can happen on fallback systems (see code comments).
## Additional Info
NA
## Issue Addressed
#3418
## Proposed Changes
- Remove `eth/v2/validator/blinded_blocks/{slot}` as this endpoint does not exist in the spec.
- Return `version` in the `eth/v1/validator/blinded_blocks/{slot}` endpoint.
## Additional Info
Since this removes the `v2` endpoint, this is *technically* a breaking change, but as this does not exist in the spec users may or may not be relying on this.
Depending on what we feel is appropriate, I'm happy to edit this so we keep the `v2` endpoint for now but simply bring the `v1` endpoint in line with `v2`.
## Issue Addressed
https://github.com/status-im/nimbus-eth2/issues/3930
## Proposed Changes
We can trivially support beacon nodes which do not provide the `is_optimistic` field by wrapping the field in an `Option`.
## Issue Addressed
NA
## Proposed Changes
This PR will make Lighthouse return blocks with invalid payloads via the API with `execution_optimistic = true`. This seems a bit awkward, however I think it's better than returning a 404 or some other error.
Let's consider the case where the only possible head is invalid (#3370 deals with this). In such a scenario all of the duties endpoints will start failing because the head is invalid. I think it would be better if the duties endpoints continue to work, because it's likely that even though the head is invalid the duties are still based upon valid blocks and we want the VC to have them cached. There's no risk to the VC here because we won't actually produce an attestation pointing to an invalid head.
Ultimately, I don't think it's particularly important for us to distinguish between optimistic and invalid blocks on the API. Neither should be trusted and the only *real* reason that we track this is so we can try and fork around the invalid blocks.
## Additional Info
- ~~Blocked on #3370~~
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
There are scenarios where the only viable head will have an invalid execution payload, in this scenario the `get_head` function on `proto_array` will return an error. We must recover from this scenario by importing blocks from the network.
This PR stops `BeaconChain::recompute_head` from returning an error so that we can't accidentally start down-scoring peers or aborting block import just because the current head has an invalid payload.
## Reviewer Notes
The following changes are included:
1. Allow `fork_choice.get_head` to fail gracefully in `BeaconChain::process_block` when trying to update the `early_attester_cache`; simply don't add the block to the cache rather than aborting the entire process.
1. Don't return an error from `BeaconChain::recompute_head_at_current_slot` and `BeaconChain::recompute_head` to defensively prevent calling functions from aborting any process just because the fork choice function failed to run.
- This should have practically no effect, since most callers were still continuing if recomputing the head failed.
- The outlier is that the API will return 200 rather than a 500 when fork choice fails.
1. Add the `ProtoArrayForkChoice::set_all_blocks_to_optimistic` function to recover from the scenario where we've rebooted and the persisted fork choice has an invalid head.
## Issue Addressed
Resolves#3151
## Proposed Changes
When fetching duties for sync committee contributions, check the value of `execution_optimistic` of the head block from the BN and refuse to sign any sync committee messages `if execution_optimistic == true`.
## Additional Info
- Is backwards compatible with older BNs
- Finding a way to add test coverage for this would be prudent. Open to suggestions.
## Issue Addressed
As specified in the [Beacon Chain API specs](https://github.com/ethereum/beacon-APIs/blob/master/apis/node/syncing.yaml#L32-L35) we should return `is_optimistic` as part of the response to a query for the `eth/v1/node/syncing` endpoint.
## Proposed Changes
Compute the optimistic status of the head and add it to the `SyncingData` response.
