## Proposed Changes
With proposer boosting implemented (#2822) we have an opportunity to re-org out late blocks.
This PR adds three flags to the BN to control this behaviour:
* `--disable-proposer-reorgs`: turn aggressive re-orging off (it's on by default).
* `--proposer-reorg-threshold N`: attempt to orphan blocks with less than N% of the committee vote. If this parameter isn't set then N defaults to 20% when the feature is enabled.
* `--proposer-reorg-epochs-since-finalization N`: only attempt to re-org late blocks when the number of epochs since finalization is less than or equal to N. The default is 2 epochs, meaning re-orgs will only be attempted when the chain is finalizing optimally.
For safety Lighthouse will only attempt a re-org under very specific conditions:
1. The block being proposed is 1 slot after the canonical head, and the canonical head is 1 slot after its parent. i.e. at slot `n + 1` rather than building on the block from slot `n` we build on the block from slot `n - 1`.
2. The current canonical head received less than N% of the committee vote. N should be set depending on the proposer boost fraction itself, the fraction of the network that is believed to be applying it, and the size of the largest entity that could be hoarding votes.
3. The current canonical head arrived after the attestation deadline from our perspective. This condition was only added to support suppression of forkchoiceUpdated messages, but makes intuitive sense.
4. The block is being proposed in the first 2 seconds of the slot. This gives it time to propagate and receive the proposer boost.
## Additional Info
For the initial idea and background, see: https://github.com/ethereum/consensus-specs/pull/2353#issuecomment-950238004
There is also a specification for this feature here: https://github.com/ethereum/consensus-specs/pull/3034
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
## Issue Addressed
#3766
## Proposed Changes
Adds an endpoint to get the graffiti that will be used for the next block proposal for each validator.
## Usage
```bash
curl -H "Authorization: Bearer api-token" http://localhost:9095/lighthouse/ui/graffiti | jq
```
```json
{
"data": {
"0x81283b7a20e1ca460ebd9bbd77005d557370cabb1f9a44f530c4c4c66230f675f8df8b4c2818851aa7d77a80ca5a4a5e": "mr f was here",
"0xa3a32b0f8b4ddb83f1a0a853d81dd725dfe577d4f4c3db8ece52ce2b026eca84815c1a7e8e92a4de3d755733bf7e4a9b": "mr v was here",
"0x872c61b4a7f8510ec809e5b023f5fdda2105d024c470ddbbeca4bc74e8280af0d178d749853e8f6a841083ac1b4db98f": null
}
}
```
## Additional Info
This will only return graffiti that the validator client knows about.
That is from these 3 sources:
1. Graffiti File
2. validator_definitions.yml
3. The `--graffiti` flag on the VC
If the graffiti is set on the BN, it will not be returned. This may warrant an additional endpoint on the BN side which can be used in the event the endpoint returns `null`.
## Proposed Changes
Adds docs for the following endpoints:
- `/lighthouse/analysis/attestation_performance`
- `/lighthouse/analysis/block_packing_efficiency`
## Issue Addressed
#3724
## Proposed Changes
Exposes certain `validator_monitor` as an endpoint on the HTTP API. Will only return metrics for validators which are actively being monitored.
### Usage
```bash
curl -X GET "http://localhost:5052/lighthouse/ui/validator_metrics" -H "accept: application/json" | jq
```
```json
{
"data": {
"validators": {
"12345": {
"attestation_hits": 10,
"attestation_misses": 0,
"attestation_hit_percentage": 100,
"attestation_head_hits": 10,
"attestation_head_misses": 0,
"attestation_head_hit_percentage": 100,
"attestation_target_hits": 5,
"attestation_target_misses": 5,
"attestation_target_hit_percentage": 50
}
}
}
}
```
## Additional Info
Based on #3756 which should be merged first.
* Add API endpoint to count statuses of all validators (#3756)
* Delete DB schema migrations for v11 and earlier (#3761)
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Now that the Gnosis merge is scheduled, all users should have upgraded beyond Lighthouse v3.0.0. Accordingly we can delete schema migrations for versions prior to v3.0.0.
## Additional Info
I also deleted the state cache stuff I added in #3714 as it turned out to be useless for the light client proofs due to the one-slot offset.
## Issue Addressed
#3724
## Proposed Changes
Adds an endpoint to quickly count the number of occurances of each status in the validator set.
## Usage
```bash
curl -X GET "http://localhost:5052/lighthouse/ui/validator_count" -H "accept: application/json" | jq
```
```json
{
"data": {
"active_ongoing":479508,
"active_exiting":0,
"active_slashed":0,
"pending_initialized":28,
"pending_queued":0,
"withdrawal_possible":933,
"withdrawal_done":0,
"exited_unslashed":0,
"exited_slashed":3
}
}
```
## Issue Addressed
Related to #3672
## Proposed Changes
- Added a guide to run a node. Mainly, copy and paste from 'Merge Migration' and 'Checkpoint Sync'.
- Ranked it high in ToC:
- Introduction
- Installation
- Run a Node
- Become a Validator
...
- Hid 'Merge Migration' in ToC.
## Additional Info
- Should I add/rephrase/delete something?
- Now there is some redundancy:
- 'Run a node' and 'Checkpoint Sync' contain similar information.
- Same for 'Run a node' and 'Become a Validator'.
Co-authored-by: kevinbogner <114221396+kevinbogner@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
This PR adds some health endpoints for the beacon node and the validator client.
Specifically it adds the endpoint:
`/lighthouse/ui/health`
These are not entirely stable yet. But provide a base for modification for our UI.
These also may have issues with various platforms and may need modification.
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
* Add v3.2 and v3.3 to database migrations table
* Remove docs on `--subscribe-all-subnets` and `--import-all-attestations` from redundancy docs
* Clarify that the merge has already occurred on the merge migration page
## Issue Addressed
There are few spelling and grammar errors in the book.
## Proposed Changes
Corrected those spelling and grammar errors in the below files
- book/src/advanced-release-candidates.md
- book/src/advanced_networking.md
- book/src/builders.md
- book/src/key-management.md
- book/src/merge-migration.md
- book/src/wallet-create.md
Co-authored-by: Kausik Das <kausik007007@gmail.com>
Co-authored-by: Kausik Das ✪ <kausik007007@gmail.com>
## Proposed Changes
In this change I've added a new beacon_node cli flag `--execution-jwt-secret-key` for passing the JWT secret directly as string.
Without this flag, it was non-trivial to pass a secrets file containing a JWT secret key without compromising its contents into some management repo or fiddling around with manual file mounts for cloud-based deployments.
When used in combination with environment variables, the secret can be injected into container-based systems like docker & friends quite easily.
It's both possible to either specify the file_path to the JWT secret or pass the JWT secret directly.
I've modified the docs and attached a test as well.
## Additional Info
The logic has been adapted a bit so that either one of `--execution-jwt` or `--execution-jwt-secret-key` must be set when specifying `--execution-endpoint` so that it's still compatible with the semantics before this change and there's at least one secret provided.
## Proposed Changes
Add a new Cargo compilation profile called `maxperf` which enables more aggressive compiler optimisations at the expense of compilation time.
Some rough initial benchmarks show that this can provide up to a 25% reduction to run time for CPU bound tasks like block processing: https://docs.google.com/spreadsheets/d/15jHuZe7lLHhZq9Nw8kc6EL0Qh_N_YAYqkW2NQ_Afmtk/edit
The numbers in that spreadsheet compare the `consensus-context` branch from #3604 to the same branch compiled with the `maxperf` profile using:
```
PROFILE=maxperf make install-lcli
```
## Additional Info
The downsides of the maxperf profile are:
- It increases compile times substantially, which will particularly impact low-spec hardware. Compiling `lcli` is about 3x slower. Compiling Lighthouse is about 5x slower on my 5950X: 17m 38s rather than 3m 28s.
As a result I think we should not enable this everywhere by default.
- **Option 1**: enable by default for our released binaries. This gives the majority of users the fastest version of `lighthouse` possible, at the expense of slowing down our release CI. Source builds will continue to use the default `release` profile unless users opt-in to `maxperf`.
- **Option 2**: enable by default for source builds. This gives users building from source an edge, but makes them pay for it with compilation time.
I think I would prefer Option 1. I'll try doing some benchmarking to see how long a maxperf build of Lighthouse would take on GitHub actions.
Credit to Nicholas Nethercote for documenting these options in the Rust Performance Book: https://nnethercote.github.io/perf-book/build-configuration.html.
## Proposed Changes
Add some docs on checking the builder configuration, which is a frequently asked question on Discord.
## Additional Info
My text editor also insisted on stripping some trailing newlines, but can put 'em back if we want
## Issue Addressed
Make sure gas limit examples in our docs represent sane values.
Thanks @dankrad for raising this in discord.
## Additional Info
We could also consider logging warnings about whether the gas limits configured are sane. Prysm has an open issue for this: https://github.com/prysmaticlabs/prysm/issues/10810
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Add a section on the new community checkpoint sync endpoints in the book. This should help stakers sync faster even without having to create an account.
## Issue Addressed
Related: #3550
Remove references to the `--strict-fee-recipient` flag in docs. The flag will cause missed proposals prior to the merge transition.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Closes#3514
## Proposed Changes
- Change default monitoring endpoint frequency to 120 seconds to fit with 30k requests/month limit.
- Allow configuration of the monitoring endpoint frequency using `--monitoring-endpoint-frequency N` where `N` is a value in seconds.
## Issue Addressed
Resolves https://github.com/sigp/lighthouse/issues/3517
## Proposed Changes
Adds a `--builder-profit-threshold <wei value>` flag to the BN. If an external payload's value field is less than this value, the local payload will be used. The value of the local payload will not be checked (it can't really be checked until the engine API is updated to support this).
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
This PR has two aims: to speed up attestation packing in the op pool, and to fix bugs in the verification of attester slashings, proposer slashings and voluntary exits. The changes are bundled into a single database schema upgrade (v12).
Attestation packing is sped up by removing several inefficiencies:
- No more recalculation of `attesting_indices` during packing.
- No (unnecessary) examination of the `ParticipationFlags`: a bitfield suffices. See `RewardCache`.
- No re-checking of attestation validity during packing: the `AttestationMap` provides attestations which are "correct by construction" (I have checked this using Hydra).
- No SSZ re-serialization for the clunky `AttestationId` type (it can be removed in a future release).
So far the speed-up seems to be roughly 2-10x, from 500ms down to 50-100ms.
Verification of attester slashings, proposer slashings and voluntary exits is fixed by:
- Tracking the `ForkVersion`s that were used to verify each message inside the `SigVerifiedOp`. This allows us to quickly re-verify that they match the head state's opinion of what the `ForkVersion` should be at the epoch(s) relevant to the message.
- Storing the `SigVerifiedOp` on disk rather than the raw operation. This allows us to continue track the fork versions after a reboot.
This is mostly contained in this commit 52bb1840ae5c4356a8fc3a51e5df23ed65ed2c7f.
## Additional Info
The schema upgrade uses the justified state to re-verify attestations and compute `attesting_indices` for them. It will drop any attestations that fail to verify, by the logic that attestations are most valuable in the few slots after they're observed, and are probably stale and useless by the time a node restarts. Exits and proposer slashings and similarly re-verified to obtain `SigVerifiedOp`s.
This PR contains a runtime killswitch `--paranoid-block-proposal` which opts out of all the optimisations in favour of closely verifying every included message. Although I'm quite sure that the optimisations are correct this flag could be useful in the event of an unforeseen emergency.
Finally, you might notice that the `RewardCache` appears quite useless in its current form because it is only updated on the hot-path immediately before proposal. My hope is that in future we can shift calls to `RewardCache::update` into the background, e.g. while performing the state advance. It is also forward-looking to `tree-states` compatibility, where iterating and indexing `state.{previous,current}_epoch_participation` is expensive and needs to be minimised.
## Proposed Changes
Address a few shortcomings of the book noticed by users:
- Remove description of redundant execution nodes
- Use an Infura eth1 node rather than an eth2 node in the merge migration example
- Add an example of the fee recipient address format (we support addresses without the 0x prefix, but 0x prefixed feels more canonical).
- Clarify that Windows support is no longer beta
- Add a link to the MSRV to the build-from-source instructions
## Proposed Changes
Update the merge migration docs to encourage updating mainnet configs _now_!
The docs are also updated to recommend _against_ `--suggested-fee-recipient` on the beacon node (https://github.com/sigp/lighthouse/issues/3432).
Additionally the `--help` for the CLI is updated to match with a few small semantic changes:
- `--execution-jwt` is no longer allowed without `--execution-endpoint`. We've ended up without a default for `--execution-endpoint`, so I think that's fine.
- The flags related to the JWT are only allowed if `--execution-jwt` is provided.
## Proposed Changes
Enable multiple database backends for the slasher, either MDBX (default) or LMDB. The backend can be selected using `--slasher-backend={lmdb,mdbx}`.
## Additional Info
In order to abstract over the two library's different handling of database lifetimes I've used `Box::leak` to give the `Environment` type a `'static` lifetime. This was the only way I could think of using 100% safe code to construct a self-referential struct `SlasherDB`, where the `OpenDatabases` refers to the `Environment`. I think this is OK, as the `Environment` is expected to live for the life of the program, and both database engines leave the database in a consistent state after each write. The memory claimed for memory-mapping will be freed by the OS and appropriately flushed regardless of whether the `Environment` is actually dropped.
We are depending on two `sigp` forks of `libmdbx-rs` and `lmdb-rs`, to give us greater control over MDBX OS support and LMDB's version.
## Issue Addressed - N/A
## Proposed Changes
Adding badge to contribution docs that shows the number of minted GitPOAPs
## Additional Info
Hey all, this PR adds a [GitPOAP Badge](https://docs.gitpoap.io/api#get-v1repoownernamebadge) to the contribution docs that displays the number of minted GitPOAPs for this repository by contributors to this repo.
You can see an example of this in [our Documentation repository](https://github.com/gitpoap/gitpoap-docs#gitpoap-docs).
This should help would-be contributors as well as existing contributors find out that they will/have received GitPOAPs for their contributions.
CC: @colfax23 @kayla-henrie
Replaces: https://github.com/sigp/lighthouse/pull/3330
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Resolves#3424
## Proposed Changes
This PR expands the merge migration docs to include (hopefully) clearer guidance on the steps required. It's inspired by @winksaville's work in #3426 but takes a more drastic approach to rewriting large sections.
* Add a prominent _When?_ section
* Add links to execution engine configuration guides
* Add links to community guides
* Fix the location of the _Strict fee recipient_ section
## Proposed Changes
Add a list of schema version changes to the book.
I hope this will be helpful for users upgrading to v2.5.0, to know that they can downgrade to schema v9 to run v2.3.0/v2.4.0 or to schema v8 to run v2.2.0/v2.1.0.
## Issue Addressed
Fixes an issue identified by @remyroy whereby we were logging a recommendation to use `--eth1-endpoints` on merge-ready setups (when the execution layer was out of sync).
## Proposed Changes
I took the opportunity to clean up the other eth1-related logs, replacing "eth1" by "deposit contract" or "execution" as appropriate.
I've downgraded the severity of the `CRIT` log to `ERRO` and removed most of the recommendation text. The reason being that users lacking an execution endpoint will be informed by the new `WARN Not merge ready` log pre-Bellatrix, or the regular errors from block verification post-Bellatrix.
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Resolves#3267Resolves#3156
## Proposed Changes
- Move the log for fee recipient checks from proposer cache insertion into block proposal so we are directly checking what we get from the EE
- Only log when there is a discrepancy with the local EE, not when using the builder API. In the `builder-api` branch there is an `info` log when there is a discrepancy, I think it is more likely there will be a difference in fee recipient with the builder api because proposer payments might be made via a transaction in the block. Not really sure what patterns will become commong.
- Upgrade the log from a `warn` to an `error` - not actually sure which we want, but I think this is worth an error because the local EE with default transaction ordering I think should pretty much always use the provided fee recipient
- add a `strict-fee-recipient` flag to the VC so we only sign blocks with matching fee recipients. Falls back from the builder API to the local API if there is a discrepancy .
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
* #3173
## Proposed Changes
Moved all `fee_recipient_file` related logic inside the `ValidatorStore` as it makes more sense to have this all together there. I tested this with the validators I have on `mainnet-shadow-fork-5` and everything appeared to work well. Only technicality is that I can't get the method to return `401` when the authorization header is not specified (it returns `400` instead). Fixing this is probably quite difficult given that none of `warp`'s rejections have code `401`.. I don't really think this matters too much though as long as it fails.
## Issue Addressed
Lays the groundwork for builder API changes by implementing the beacon-API's new `register_validator` endpoint
## Proposed Changes
- Add a routine in the VC that runs on startup (re-try until success), once per epoch or whenever `suggested_fee_recipient` is updated, signing `ValidatorRegistrationData` and sending it to the BN.
- TODO: `gas_limit` config options https://github.com/ethereum/builder-specs/issues/17
- BN only sends VC registration data to builders on demand, but VC registration data *does update* the BN's prepare proposer cache and send an updated fcU to a local EE. This is necessary for fee recipient consistency between the blinded and full block flow in the event of fallback. Having the BN only send registration data to builders on demand gives feedback directly to the VC about relay status. Also, since the BN has no ability to sign these messages anyways (so couldn't refresh them if it wanted), and validator registration is independent of the BN head, I think this approach makes sense.
- Adds upcoming consensus spec changes for this PR https://github.com/ethereum/consensus-specs/pull/2884
- I initially applied the bit mask based on a configured application domain.. but I ended up just hard coding it here instead because that's how it's spec'd in the builder repo.
- Should application mask appear in the api?
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Add documentation for the `lighthouse db migate` command, which users will be able to use to downgrade from Lighthouse v2.3.0 on non-merge networks (mainnet & Prater).
I think it's important to get this into the live instance of the book so we can link to it from the v2.3.0 release notes.
## Issue Addressed
Web3Signer validators do not support client authentication. This means the `--tls-known-clients-file` option on Web3Signer can't be used with Lighthouse.
## Proposed Changes
Add two new fields to Web3Signer validators, `client_identity_path` and `client_identity_password`, which specify the path and password for a PKCS12 file containing a certificate and private key. If `client_identity_path` is present, use the certificate for SSL client authentication.
## Additional Info
I am successfully validating on Prater using client authentication with Web3Signer and client authentication.
## Proposed Changes
Increase the default `--slots-per-restore-point` to 8192 for a 4x reduction in freezer DB disk usage.
Existing nodes that use the previous default of 2048 will be left unchanged. Newly synced nodes (with or without checkpoint sync) will use the new 8192 default.
Long-term we could do away with the freezer DB entirely for validator-only nodes, but this change is much simpler and grants us some extra space in the short term. We can also roll it out gradually across our nodes by purging databases one by one, while keeping the Ansible config the same.
## Additional Info
We ignore a change from 2048 to 8192 if the user hasn't set the 8192 explicitly. We fire a debug log in the case where we do ignore:
```
DEBG Ignoring slots-per-restore-point config in favour of on-disk value, on_disk: 2048, config: 8192
```
## Issue Addressed
No issue
## Proposed Changes
Correct typos in book
## Additional Info
Nothing to add
Co-authored-by: Emilia Hane <58548332+emhane@users.noreply.github.com>
## Issue Addressed
N/A
## Proposed Changes
Removes all configurations and hard-coded rules related to the deprecated Pyrmont testnet.
## Additional Info
Pyrmont is deprecated/will be shut down after being used for scenario testing, this PR removes configurations related to it.
Co-authored-by: Zachinquarantine <zachinquarantine@yahoo.com>
## Issue Addressed
NA
## Proposed Changes
Add the "Update Priority" section which has featured in many of our previous releases (e.g., [Poñeta](https://github.com/sigp/lighthouse/releases/v2.1.1)).
Previously this section has been copied in manually.
## Additional Info
NA
## Issue Addressed
#2883
## Proposed Changes
* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs
## Additional Info
Changed the Implementation following the discussion in #2883.
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
## Issue Addressed
Closes#2938
## Proposed Changes
* Build and publish images with a `-modern` suffix which enable CPU optimizations for modern hardware.
* Add docs for the plethora of available images!
* Unify all the Docker workflows in `docker.yml` (including for tagged releases).
## Additional Info
The `Dockerfile` is no longer used by our Docker Hub builds, as we use `cross` and a generic approach for ARM and x86. There's a new CI job `docker-build-from-source` which tests the `Dockerfile` without publishing anything.
## Issue Addressed
Implements the standard key manager API from https://ethereum.github.io/keymanager-APIs/, formerly https://github.com/ethereum/beacon-APIs/pull/151
Related to https://github.com/sigp/lighthouse/issues/2557
## Proposed Changes
- [x] Add all of the new endpoints from the standard API: GET, POST and DELETE.
- [x] Add a `validators.enabled` column to the slashing protection database to support atomic disable + export.
- [x] Add tests for all the common sequential accesses of the API
- [x] Add tests for interactions with remote signer validators
- [x] Add end-to-end tests for migration of validators from one VC to another
- [x] Implement the authentication scheme from the standard (token bearer auth)
## Additional Info
The `enabled` column in the validators SQL database is necessary to prevent a race condition when exporting slashing protection data. Without the slashing protection database having a way of knowing that a key has been disabled, a concurrent request to sign a message could insert a new record into the database. The `delete_concurrent_with_signing` test exercises this code path, and was indeed failing before the `enabled` column was added.
The validator client authentication has been modified from basic auth to bearer auth, with basic auth preserved for backwards compatibility.
## Issue Addressed
NA
## Proposed Changes
Since we use the `rc` (release candidate) tag in our version strings, it seems consistent if we also use "release candidate" in the book rather than "pre-release".
Notably, Github adds a "pre-release" tag to release when we request. I think it's OK that Github uses that term whilst we consistently use "release candidate". Our docs indicate that the terms are interchangeable.
## Additional Info
I hope to use the new docs link in the `v2.1.0` release, so it would be nice if we can merge this soon 🙏
## Issue Addressed
https://github.com/sigp/lighthouse/issues/2889
## Additional Info
I have checked that linkcheck has succeeded on the book built locally. 👌
```shell
$ cd book
$ mdbook serve --open
...
2022-01-14 01:13:40 [INFO] (mdbook::book): Book building has started
2022-01-14 01:13:40 [INFO] (mdbook::book): Running the html backend
$ linkcheck http://localhost:3000
Perfect. Checked 4495 links, 80 destination URLs (76 ignored).
```
Also I'll tackle running linkcheck on CI in another pull request.
## Issue Addressed
Closes#2286Closes#2538Closes#2342
## Proposed Changes
Part II of major slasher optimisations after #2767
These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱
* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
## Issue Addressed
N/A
## Proposed Changes
From discord, it seems like users are a bit unclear on how to run checkpoint sync if they don't have an existing synced beacon node. Adds a note on how to use infura for the checkpoint sync feature.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2112
Closes https://github.com/sigp/lighthouse/issues/1861
## Proposed Changes
Collect attestations by validator index in the slasher, and use the magic of reference counting to automatically discard redundant attestations. This results in us storing only 1-2% of the attestations observed when subscribed to all subnets, which carries over to a 50-100x reduction in data stored 🎉
## Additional Info
There's some nuance to the configuration of the `slot-offset`. It has a profound effect on the effictiveness of de-duplication, see the docs added to the book for an explanation: 5442e695e5/book/src/slasher.md (slot-offset)
## Issue Addressed
No specific issue. Just some improvement in the documentation provided by the book.
## Proposed Changes
Add minimum supported version for checkpoint sync in book to make sure users who want to use this feature know they need to be using at least version 2.0.0.
## Issue Addressed
Resolves#2262
## Proposed Changes
Add a new CLI flag `--beacon-nodes-tls-certs` which allows the user to specify a path to a certificate file (or a list of files, separated by commas). The VC will then use these certificates (in addition to the existing certificates in the OS trust store) when connecting to a beacon node over HTTPS.
## Additional Info
This only supports certificates in PEM format.
## Issue Addressed
Closes#2419
## Proposed Changes
Address a long-standing issue with the import of slashing protection data where the import would fail due to the data appearing slashable w.r.t the existing database. Importing is now idempotent, and will have no issues importing data that has been handed back and forth between different validator clients, or different implementations.
The implementation works by updating the high and low watermarks if they need updating, and not attempting to check if the input is slashable w.r.t itself or the database. This is a strengthening of the minification that we started to do by default since #2380, and what Teku has been doing since the beginning.
## Additional Info
The only feature we lose by doing this is the ability to do non-minified imports of clock drifted messages (cf. Prysm on Medalla). In theory, with the previous implementation we could import all the messages in case of clock drift and be aware of the "gap" between the real present time and the messages signed in the far future. _However_ for attestations this is close to useless, as the source epoch will advance as soon as justification occurs, which will require us to make slashable attestations with respect to our bogus attestation(s). E.g. if I sign an attestation 100=>200 when the current epoch is 101, then I won't be able to vote in any epochs prior to 101 becoming justified because 101=>102, 101=>103, etc are all surrounded by 100=>200. Seeing as signing attestations gets blocked almost immediately in this case regardless of our import behaviour, there's no point trying to handle it. For blocks the situation is more hopeful due to the lack of surrounds, but losing block proposals from validators who by definition can't attest doesn't seem like an issue (the other block proposers can pick up the slack).
Currently, the beacon node has no ability to serve the HTTP API over TLS.
Adding this functionality would be helpful for certain use cases, such as when you need a validator client to connect to a backup beacon node which is outside your local network, and the use of an SSH tunnel or reverse proxy would be inappropriate.
## Proposed Changes
- Add three new CLI flags to the beacon node
- `--http-enable-tls`: enables TLS
- `--http-tls-cert`: to specify the path to the certificate file
- `--http-tls-key`: to specify the path to the key file
- Update the HTTP API to optionally use `warp`'s [`TlsServer`](https://docs.rs/warp/0.3.1/warp/struct.TlsServer.html) depending on the presence of the `--http-enable-tls` flag
- Update tests and docs
- Use a custom branch for `warp` to ensure proper error handling
## Additional Info
Serving the API over TLS should currently be considered experimental. The reason for this is that it uses code from an [unmerged PR](https://github.com/seanmonstar/warp/pull/717). This commit provides the `try_bind_with_graceful_shutdown` method to `warp`, which is helpful for controlling error flow when the TLS configuration is invalid (cert/key files don't exist, incorrect permissions, etc).
I've implemented the same code in my [branch here](https://github.com/macladson/warp/tree/tls).
Once the code has been reviewed and merged upstream into `warp`, we can remove the dependency on my branch and the feature can be considered more stable.
Currently, the private key file must not be password-protected in order to be read into Lighthouse.
## Issue Addressed
Resolves#2563
Replacement for #2653 as I'm not able to reopen that PR after force pushing.
## Proposed Changes
Fixes all broken api links. Cherry picked changes in #2590 and updated a few more links.
Co-authored-by: Mason Stallmo <masonstallmo@gmail.com>
## Issue Addressed
Fix#2585
## Proposed Changes
Provide a canonical version of test_logger that can be used
throughout lighthouse.
## Additional Info
This allows tests to conditionally emit logging data by adding
test_logger as the default logger. And then when executing
`cargo test --features logging/test_logger` log output
will be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test --features logging/test_logger
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-e20115db6a5e3714)
running 1 test
Sep 10 12:53:45.212 INFO hi, module: test_logger:8
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Or, in normal scenarios where logging isn't needed, executing
`cargo test` the log output will not be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-02e02f8d41e8cf8a)
running 1 test
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
## Issue Addressed
Closes#1891Closes#1784
## Proposed Changes
Implement checkpoint sync for Lighthouse, enabling it to start from a weak subjectivity checkpoint.
## Additional Info
- [x] Return unavailable status for out-of-range blocks requested by peers (#2561)
- [x] Implement sync daemon for fetching historical blocks (#2561)
- [x] Verify chain hashes (either in `historical_blocks.rs` or the calling module)
- [x] Consistency check for initial block + state
- [x] Fetch the initial state and block from a beacon node HTTP endpoint
- [x] Don't crash fetching beacon states by slot from the API
- [x] Background service for state reconstruction, triggered by CLI flag or API call.
Considered out of scope for this PR:
- Drop the requirement to provide the `--checkpoint-block` (this would require some pretty heavy refactoring of block verification)
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
N/A
## Proposed Changes
Add a note to the Doppelganger Protection docs about how it is not interoperable until an endpoint facilitating it is standardized (https://github.com/ethereum/beacon-APIs/pull/131).
## Additional Info
N/A
Co-authored-by: realbigsean <seananderson33@gmail.com>
[EIP-3030]: https://eips.ethereum.org/EIPS/eip-3030
[Web3Signer]: https://consensys.github.io/web3signer/web3signer-eth2.html
## Issue Addressed
Resolves#2498
## Proposed Changes
Allows the VC to call out to a [Web3Signer] remote signer to obtain signatures.
## Additional Info
### Making Signing Functions `async`
To allow remote signing, I needed to make all the signing functions `async`. This caused a bit of noise where I had to convert iterators into `for` loops.
In `duties_service.rs` there was a particularly tricky case where we couldn't hold a write-lock across an `await`, so I had to first take a read-lock, then grab a write-lock.
### Move Signing from Core Executor
Whilst implementing this feature, I noticed that we signing was happening on the core tokio executor. I suspect this was causing the executor to temporarily lock and occasionally trigger some HTTP timeouts (and potentially SQL pool timeouts, but I can't verify this). Since moving all signing into blocking tokio tasks, I noticed a distinct drop in the "atttestations_http_get" metric on a Prater node:
I think this graph indicates that freeing the core executor allows the VC to operate more smoothly.
### Refactor TaskExecutor
I noticed that the `TaskExecutor::spawn_blocking_handle` function would fail to spawn tasks if it were unable to obtain handles to some metrics (this can happen if the same metric is defined twice). It seemed that a more sensible approach would be to keep spawning tasks, but without metrics. To that end, I refactored the function so that it would still function without metrics. There are no other changes made.
## TODO
- [x] Restructure to support multiple signing methods.
- [x] Add calls to remote signer from VC.
- [x] Documentation
- [x] Test all endpoints
- [x] Test HTTPS certificate
- [x] Allow adding remote signer validators via the API
- [x] Add Altair support via [21.8.1-rc1](https://github.com/ConsenSys/web3signer/releases/tag/21.8.1-rc1)
- [x] Create issue to start using latest version of web3signer. (See #2570)
## Notes
- ~~Web3Signer doesn't yet support the Altair fork for Prater. See https://github.com/ConsenSys/web3signer/issues/423.~~
- ~~There is not yet a release of Web3Signer which supports Altair blocks. See https://github.com/ConsenSys/web3signer/issues/391.~~
Move the contents of book/src/local-testnets.md into book/src/setup.md
to make it more discoverable.
Also, the link to scripts/local_testnet was missing `/local_testnet`.
## Issue Addressed
Resolves#2438Resolves#2437
## Proposed Changes
Changes the permissions for validator client http server api token file and secret key to 600 from 644. Also changes the permission for logfiles generated using the `--logfile` cli option to 600.
Logs the path to the api token instead of the actual api token. Updates docs to reflect the change.
## Issue Addressed
Resolves#2406
## Proposed Changes
Add windows release binaries to our CI
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
When we released [`v1.4.0-rc.0`](https://github.com/sigp/lighthouse/releases/tag/v1.4.0-rc.0), we added a bunch of text about pre-releases. That information was useful, but somewhat hard to reference in future pre-releases.
This PR adds some docs to the book so whenever we do a pre-release we can point users to these docs for more info.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Adds docs for Doppelganger Protection
- Shortens a log message since it was a bit longer than our usual formatting.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Replace all --process-all-attestations with --import-all-attestations
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
NA
## Proposed Changes
This PR addresses two things:
1. Allows the `ValidatorMonitor` to work with Altair states.
1. Optimizes `altair::process_epoch` (see [code](https://github.com/paulhauner/lighthouse/blob/participation-cache/consensus/state_processing/src/per_epoch_processing/altair/participation_cache.rs) for description)
## Breaking Changes
The breaking changes in this PR revolve around one premise:
*After the Altair fork, it's not longer possible (given only a `BeaconState`) to identify if a validator had *any* attestation included during some epoch. The best we can do is see if that validator made the "timely" source/target/head flags.*
Whilst this seems annoying, it's not actually too bad. Finalization is based upon "timely target" attestations, so that's really the most important thing. Although there's *some* value in knowing if a validator had *any* attestation included, it's far more important to know about "timely target" participation, since this is what affects finality and justification.
For simplicity and consistency, I've also removed the ability to determine if *any* attestation was included from metrics and API endpoints. Now, all Altair and non-Altair states will simply report on the head/target attestations.
The following section details where we've removed fields and provides replacement values.
### Breaking Changes: Prometheus Metrics
Some participation metrics have been removed and replaced. Some were removed since they are no longer relevant to Altair (e.g., total attesting balance) and others replaced with gwei values instead of pre-computed values. This provides more flexibility at display-time (e.g., Grafana).
The following metrics were added as replacements:
- `beacon_participation_prev_epoch_head_attesting_gwei_total`
- `beacon_participation_prev_epoch_target_attesting_gwei_total`
- `beacon_participation_prev_epoch_source_attesting_gwei_total`
- `beacon_participation_prev_epoch_active_gwei_total`
The following metrics were removed:
- `beacon_participation_prev_epoch_attester`
- instead use `beacon_participation_prev_epoch_source_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_target_attester`
- instead use `beacon_participation_prev_epoch_target_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_head_attester`
- instead use `beacon_participation_prev_epoch_head_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
The `beacon_participation_prev_epoch_attester` endpoint has been removed. Users should instead use the pre-existing `beacon_participation_prev_epoch_target_attester`.
### Breaking Changes: HTTP API
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint loses the following fields:
- `current_epoch_attesting_gwei` (use `current_epoch_target_attesting_gwei` instead)
- `previous_epoch_attesting_gwei` (use `previous_epoch_target_attesting_gwei` instead)
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint lose the following fields:
- `is_current_epoch_attester` (use `is_current_epoch_target_attester` instead)
- `is_previous_epoch_attester` (use `is_previous_epoch_target_attester` instead)
- `is_active_in_current_epoch` becomes `is_active_unslashed_in_current_epoch`.
- `is_active_in_previous_epoch` becomes `is_active_unslashed_in_previous_epoch`.
## Additional Info
NA
## TODO
- [x] Deal with total balances
- [x] Update validator_inclusion API
- [ ] Ensure `beacon_participation_prev_epoch_target_attester` and `beacon_participation_prev_epoch_head_attester` work before Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#2468
## Proposed Changes
Document security considerations for the beacon node API, with strong recommendations against exposing it to the internet.
## Issue Addressed
#2454
## Proposed Changes
Adds the `--http-address` flag to allow the user to use custom HTTP addresses. This can be helpful for certain Docker setups.
Since using custom HTTP addresses is unsafe due to the server being unencrypted, `--unencrypted-http-transport` was also added as a safety flag and must be used in tandem with `--http-address`. This is to ensure the user is aware of the risks associated with using non-local HTTP addresses.
## Issue Addressed
- Resolves#2452
## Proposed Changes
I've seen a few people confused by this and I don't think the message is really worth it.
## Additional Info
NA
## Issue Addressed
Closes#2354
## Proposed Changes
Add a `minify` method to `slashing_protection::Interchange` that keeps only the maximum-epoch attestation and maximum-slot block for each validator. Specifically, `minify` constructs "synthetic" attestations (with no `signing_root`) containing the maximum source epoch _and_ the maximum target epoch from the input. This is equivalent to the `minify_synth` algorithm that I've formally verified in this repository:
https://github.com/michaelsproul/slashing-proofs
## Additional Info
Includes the JSON loading optimisation from #2347
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Adds a `no-wait` flag to the validator exit command which exits right after publishing the voluntary exit to the beacon chain. It does not wait for confirmation that the exit has been included in the beacon chain. By default, the flag is false.
cc @stefa2k
## Issue Addressed
None, just a very small fix of documentation
## Proposed Changes
Fixing naming of paramter listed in documentation.
## Additional Info
No changes to code, just fixing documentation
## Issue Addressed
Resolves#1944
## Proposed Changes
Adds a "graffiti" key to the `validator_definitions.yml`. Setting the key will override anything passed through the validator `--graffiti` flag.
Returns an error if the value for the graffiti key is > 32 bytes instead of silently truncating.
## Issue Addressed
- Resolves#2064
## Proposed Changes
Adds a `ValidatorMonitor` struct which provides additional logging and Grafana metrics for specific validators.
Use `lighthouse bn --validator-monitor` to automatically enable monitoring for any validator that hits the [subnet subscription](https://ethereum.github.io/eth2.0-APIs/#/Validator/prepareBeaconCommitteeSubnet) HTTP API endpoint.
Also, use `lighthouse bn --validator-monitor-pubkeys` to supply a list of validators which will always be monitored.
See the new docs included in this PR for more info.
## TODO
- [x] Track validator balance, `slashed` status, etc.
- [x] ~~Register slashings in current epoch, not offense epoch~~
- [ ] Publish Grafana dashboard, update TODO link in docs
- [x] ~~#2130 is merged into this branch, resolve that~~
## Issue Addressed
None yet reported.
## Proposed Changes
Fix the old flag in the Voluntary exits book page to use the new `--network` flag. Also fix the default value for that flag.
## Issue Addressed
NA
## Proposed Changes
- Log about eth1 whilst waiting for genesis.
- For the block and deposit caches, update them after each download instead of when *all* downloads are complete.
- This prevents the case where a single timeout error can cause us to drop *all* previously download blocks/deposits.
- Set `max_log_requests_per_update` to avoid timeouts due to very large log counts in a response.
- Set `max_blocks_per_update` to prevent a single update of the block cache to download an unreasonable number of blocks.
- This shouldn't have any affect in normal use, it's just a safe-guard against bugs.
- Increase the timeout for eth1 calls from 15s to 60s, as per @pawanjay176's experience with Infura.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Adds a HTTP server to the VC which provides Prometheus metrics.
- Moves the health metrics into the `lighthouse_metrics` crate so it can be shared between BN/VC.
- Sprinkle some metrics around the VC.
- Update the book to indicate that we now have VC metrics.
- Shifts the "waiting for genesis" logic later in the `ProductionValidatorClient::new_from_cli`
- This is worth attention during the review.
## Additional Info
- ~~`clippy` has some new lints that are failing. I'll deal with that in another PR.~~
## Issue Addressed
Closes#1873
## Proposed Changes
Fixes the bug in slashing protection import (#1873) by pruning the database upon import.
Also expands the test generator to cover this case and a few others which are under discussion here:
https://ethereum-magicians.org/t/eip-3076-validator-client-interchange-format-slashing-protection/4883
## Additional Info
Depending on the outcome of the discussion on Eth Magicians, we can either wait for consensus before merging, or merge our preferred solution and patch things later.
## Issue Addressed
NA
## Proposed Changes
Updates the validator guide to provide instructions for mainnet users.
## Additional Info
- ~~Blocked on #1751~~
## Issue Addressed
Resolves#1890
## Proposed Changes
Change the slasher database schema to key indexed attestations by `(target_epoch, indexed_attestation_root)` instead of just `indexed_attestation_root`. This allows more straight-forward pruning (linear scan), that is also "re-entrant". By re-entrant, we mean that a pruning pass that gets stuck because of a `MapFull` error can attempt to commit midway, and be resumed later without issue. The previous pruning strategy for indexed attestations did not have this property. There was also a flaw in the previous pruning that could leave "zombie" indexed attestations in the database (ones not referenced by any attester record), which could build up and contribute to bloat (although in practice I think they occur quite infrequently).
## Additional Info
During testing I noticed that a `MapFull` error can still occur during the commit of the transaction itself, which is irritating, but not unbearable. This PR should at least reduce the frequency with which users need to manually resize their DB, and if the `MapFull` on commit rears its ugly head too often we could use a dynamic strategy (temporarily increase the size of the map until the transaction commits).
The extra bytes for the epoch make the database a bit heavier, so the size estimate docs have been updated to reflect this. This is also a breaking schema change, so anyone using a v0 database from a few hours ago will need to drop it and update 😅
This is an implementation of a slasher that lives inside the BN and can be enabled via `lighthouse bn --slasher`.
Features included in this PR:
- [x] Detection of attester slashing conditions (double votes, surrounds existing, surrounded by existing)
- [x] Integration into Lighthouse's attestation verification flow
- [x] Detection of proposer slashing conditions
- [x] Extraction of attestations from blocks as they are verified
- [x] Compression of chunks
- [x] Configurable history length
- [x] Pruning of old attestations and blocks
- [x] More tests
Future work:
* Focus on a slice of history separate from the most recent N epochs (e.g. epochs `current - K` to `current - M`)
* Run out-of-process
* Ingest attestations from the chain without a resync
Design notes are here https://hackmd.io/@sproul/HJSEklmPL
## Issue Addressed
NA
## Proposed Changes
- Caches later blocks than is required by `ETH1_FOLLOW_DISTANCE`.
- Adds logging to `warn` if the eth1 cache is insufficiently primed.
- Use `max_by_key` instead of `max_by` in `BeaconChain::Eth1Chain` since it's simpler.
- Rename `voting_period_start_timestamp` to `voting_target_timestamp` for accuracy.
## Additional Info
The reason for eating into the `ETH1_FOLLOW_DISTANCE` and caching blocks that are closer to the head is due to possibility for `SECONDS_PER_ETH1_BLOCK` to be incorrect (as is the case for the Pyrmont testnet on Goerli).
If `SECONDS_PER_ETH1_BLOCK` is too short, we'll skip back too far from the head and skip over blocks that would be valid [`is_candidate_block`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/validator.md#eth1-data) blocks. This was the case on the Pyrmont testnet and resulted in Lighthouse choosing blocks that were about 30 minutes older than is ideal.
## Issue Addressed
NA
## Proposed Changes
- Replace Zinken with Pyrmont (Zinken has been sun-setted).
- Ensure Mainnet is build in the build script.
## Additional Info
NA
## Proposed Changes
Update the slashing protection interchange format to v5 in preparation for finalisation as part of an EIP.
Also, add some more tests and update the commit hash for https://github.com/eth2-clients/slashing-protection-interchange-tests to include the new generated tests.
## Issue Addressed
Closes#1842
## Proposed Changes
Due to the lies told to us by VPS providers about what CPU features they support, we are forced to check for the availability of CPU features like ADX by just _running code and seeing if it crashes_. The prominent warning should hopefully help users who have truly incompatible CPUs work out what is going on, while not burdening users of cheap VPSs.
## Issue Addressed
- Related to #1691
## Proposed Changes
Adds the following API endpoints:
- `GET lighthouse/eth1/syncing`: status about how synced we are with Eth1.
- `GET lighthouse/eth1/block_cache`: all locally cached eth1 blocks.
- `GET lighthouse/eth1/deposit_cache`: all locally cached eth1 deposits.
Additionally:
- Moves some types from the `beacon_node/eth1` to the `common/eth2` crate, so they can be used in the API without duplication.
- Allow `update_deposit_cache` and `update_block_cache` to take an optional head block number to avoid duplicate requests.
## Additional Info
TBC
## Issue Addressed
Resolve#1652
## Proposed Changes
Adds a cli option for voluntary exits. The flow is similar to prysm's where after entering the password for the validator keystore (or load password from `secrets` if present) the user is given multiple warnings about the operation being irreversible, then redirected to the docs webpage(not added yet) which explains what a voluntary exit is and the consequences of exiting and then prompted to enter a phrase from the docs webpage as a final confirmation.
Example usage
```
$ lighthouse --testnet zinken account validator exit --validator <validator-pubkey> --beacon-node http://localhost:5052
Running account manager for zinken testnet
validator-dir path: "..."
Enter the keystore password: for validator in ...
Password is correct
Publishing a voluntary exit for validator: ...
WARNING: This is an irreversible operation
WARNING: Withdrawing staked eth will not be possible until Eth1/Eth2 merge Please visit [website] to make sure you understand the implications of a voluntary exit.
Enter the phrase from the above URL to confirm the voluntary exit:
Exit my validator
Published voluntary exit for validator ...
```
## Additional info
Not sure if we should have batch exits (`--validator all`) option for exiting all the validators in the `validators` directory. I'm slightly leaning towards having only single exits but don't have a strong preference.
## Issue Addressed
Closes#1504Closes#1505
Replaces #1703Closes#1707
## Proposed Changes
* Update BLST and Milagro to versions compatible with BLSv4 spec
* Update Lighthouse to spec v1.0.0-rc.0, and update EF test vectors
* Use the v1.0.0 constants for `MainnetEthSpec`.
* Rename `InteropEthSpec` -> `V012LegacyEthSpec`
* Change all constants to suit the mainnet `v0.12.3` specification (i.e., Medalla).
* Deprecate the `--spec` flag for the `lighthouse` binary
* This value is now obtained from the `config_name` field of the `YamlConfig`.
* Built in testnet YAML files have been updated.
* Ignore the `--spec` value, if supplied, log a warning that it will be deprecated
* `lcli` still has the spec flag, that's fine because it's dev tooling.
* Remove the `E: EthSpec` from `YamlConfig`
* This means we need to deser the genesis `BeaconState` on-demand, but this is fine.
* Swap the old "minimal", "mainnet" strings over to the new `EthSpecId` enum.
* Always require a `CONFIG_NAME` field in `YamlConfig` (it used to have a default).
## Additional Info
Lots of breaking changes, do not merge! ~~We will likely need a Lighthouse v0.4.0 branch, and possibly a long-term v0.3.0 branch to keep Medalla alive~~.
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Adds a `lighthouse/beacon/states/:state_id/ssz` endpoint to allow us to pull the genesis state from the API.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Ensure the `description` field is included with the output (as per the implementation).
## Additional Info
NA
## Issue Addressed
N/A
## Proposed Changes
Minor doc fixes. Adds a section on custom data directories.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Proposed Changes
* Add documentation about slashing protection, including how to troubleshoot issues and move between clients.
* Add an error message if the validator client is started with 0 validators. Previously it would hit an error relating to the slashing protection database not existing, which wrongly pushed people towards using the unsafe `--init-slashing-protection` flag.
## Issue Addressed
NA
## Proposed Changes
- Remove Metamask deposits from the docs.
- Restructure docs to be launchpad-centric.
- Remove references to sigp/lighthouse-docker.
- Add section about binaries.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
Fixes#1665.
## Proposed Changes
`lighthouse account_manager wallet create` now generates a 24-word
mnemonic. The user can override this by passing `--mnemonic-length 12`
(or another legal bip39 length).
## Additional Info
CLI `--help`:
```
--mnemonic-length <MNEMONIC_LENGTH> The number of words to use for the mnemonic phrase. [default: 24]
```
In case of an invalid argument:
```
% lighthouse account_manager wallet create --mnemonic-length 25
error: Invalid value for '--mnemonic-length <MNEMONIC_LENGTH>': Mnemonic length must be one of 12, 15, 18, 21, 24
```
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
## Issue Addressed
Fixes#1665.
## Proposed Changes
`lighthouse account_manager wallet create` now generates a 24-word
mnemonic. The user can override this by passing `--mnemonic-length 12`
(or another legal bip39 length).
## Additional Info
CLI `--help`:
```
--mnemonic-length <MNEMONIC_LENGTH> The number of words to use for the mnemonic phrase. [default: 24]
```
In case of an invalid argument:
```
% lighthouse account_manager wallet create --mnemonic-length 25
error: Invalid value for '--mnemonic-length <MNEMONIC_LENGTH>': Mnemonic length must be one of 12, 15, 18, 21, 24
```
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#1472
## Proposed Changes
Add `--staking` ~~and`staking-with-eth1-endpoint`~~ flag to improve UX for stakers.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#1437
## Proposed Changes
- Make the `--wallet-password` flag optional and creates an interactive prompt if not provided.
- Make the `--wallet-name` flag optional and creates an interactive prompt if not provided.
- Add a minimum password requirement of a 12 character length.
- Update the `--stdin-passwords` flag to `--stdin-inputs` because we have non-password user inputs
## Additional Info
This reverts commit 4fca306397.
Something in the BLST update is causing SIGILLs on aarch64 non-portable builds. While we debug the issue, I think it's best if we just revert the update.
## Issue Addressed
Closes#1504
Closes https://github.com/sigp/lighthouse/issues/1505
## Proposed Changes
* Update `blst` to the latest version, which is more portable and includes finer-grained compilation controls (see below).
* Detect the case where a binary has been explicitly compiled with ADX support but it's missing at runtime, and report a nicer error than `SIGILL`.
## Known Issues
* None. The previous issue with `make build-aarch64` (https://github.com/supranational/blst/issues/27), has been resolved.
## Additional Info
I think we should tweak our release process and our Docker builds so that we provide two options:
Binaries:
* `lighthouse`: compiled with `modern`/`force-adx`, for CPUs 2013 and newer
* `lighthouse-portable`: compiled with `portable` for older CPUs
Docker images:
* `sigp/lighthouse:latest`: multi-arch image with `modern` x86_64 and vanilla aarch64 binary
* `sigp/lighthouse:latest-portable`: multi-arch image with `portable` builds for x86_64 and aarch64
And relevant Docker images for the releases (as per https://github.com/sigp/lighthouse/pull/1574#issuecomment-687766141), tagged `v0.x.y` and `v0.x.y-portable`
## Issue Addressed
- Resolves#897
- Resolves#821
## Proposed Changes
Removes references to the rust docs that we're no long maintaining.
## Additional Info
NA
## Issue Addressed
N/A
## Proposed Changes
Add a `lighthouse am wallet recover` command that recreates a wallet from a mnemonic but no validator keys. Add a `lighthouse am validator recover` command which would directly create keys from a mnemonic for a given index and count.
## Additional Info
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
- Fix a wrong command in the validator generation example.
- Replace occurrences of 'passphrase' with 'password'. This is mostly because I felt that there was a lot of mixing of the two phrases in the documentation and the actual commands which is a bit confusing. Picked 'password' everywhere because it felt more appropriate but I don't mind changing it to 'passphrase' as long it's consistent everywhere.
## Issue Addressed
The lighthouse user has recently changed to `lighthouse` from root.
This requires uses to change ownership of their current docker mounted volumes and the upgrade path is non-trivial.
This reverts #1502 and we will include it in a major release in the future.
## Proposed Changes
N/A
## Additional Info
N/A
…d in the Docker image
## Issue Addressed
https://github.com/sigp/lighthouse/issues/1459
## Proposed Changes
- Create new `lighthouse` user and group in Docker container
- Set user as the default user
