This PR adds a way to subscribe to the _full_ pending transactions, as opposed to just being notified about hashes.
In use cases where client subscribes to newPendingTransactions and gets txhashes only to then request the actual transaction, the caller can now shortcut that flow and obtain the transactions directly.
Co-authored-by: Felix Lange <fjl@twurst.com>
Prior to this change, f.begin (and possibly end) stay negative, leading to strange results later in the code. With this change, filters using "safe" and "finalized" block produce results consistent w/ the overall behavior of this RPC method.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* ethclient/gethclient: improve time-sensitive flaky test
* eth/catalyst: fix (?) flaky test
* core: stop blockchains in tests after use
* core: fix dangling blockchain instances
* core: rm whitespace
* eth/gasprice, eth/tracers, consensus/clique: stop dangling blockchains in tests
* all: address review concerns
* core: goimports
* eth/catalyst: fix another time-sensitive test
* consensus/clique: add snapshot test run function
* core: rename stop() to stopWithoutSaving()
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR introduces a new mechanism in chain tracer for preventing creating too many trace states.
The workflow of chain tracer can be divided into several parts:
- state creator generates trace state in a thread
- state tracer retrieves the trace state and applies the tracing on top in another thread
- state collector gathers all result from state tracer and stream to users
It's basically a producer-consumer model here, while if we imagine that the state producer generates states too fast, then it will lead to accumulate lots of unused states in memory. Even worse, in path-based state scheme it will only keep the latest 128 states in memory, and the newly generated state will invalidate the oldest one by marking it as stale.
The solution for fixing it is to limit the speed of state generation. If there are over 128 states un-consumed in memory, then the creation will be paused until the states are be consumed properly.
Backwards compatibility warning: The result will from now on omit empty fields instead
of including a zero value (e.g. no more `balance: '0x'`).
The prestateTracer will now take an option `diffMode: bool`. In this mode
the tracer will output the pre state and post data for the modified parts of state.
Read-only accesses will be completely omitted. Creations (be it account or slot)
will be signified by omission in the `pre` list and inclusion in `post`. Whereas
deletion (be it account or slot) will be signified by inclusion in `pre` and omission
in `post` list.
Signed-off-by: Delweng <delweng@gmail.com>
This PR makes it so that the snap server responds to trie heal requests when possible, even if the snapshot does not exist. The idea being that it might prolong the lifetime of a state root, so we don't have to pivot quite as often.
The call tracer and prestate tracer store data JSON-encoded in memory. In order to support alternative encodings (specifically RLP), it's better to keep data a native format during tracing. This PR does marshalling at the end, using gencodec.
OBS!
This PR changes the call tracer result slightly:
- Order of type and value fields are changed (should not matter).
- Output fields are completely omitted when they're empty (no more output: "0x"). Previously, this was only _sometimes_ omitted (e.g. when call ended in a non-revert error) and otherwise 0x when the output was actually empty.
* eth/tracers: pad memory slice on oob case
* eth/tracers/js: fix testfailure due to err msg capitalization
Co-authored-by: Martin Holst Swende <martin@swende.se>
Sometimes we get stuck on db compaction, and the CL re-issues the "same" command to us multiple times. Each request get stuck on the same place, in the middle of the handler.
This changes makes it so we do not reprocess the same payload, but instead detects it early.
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
This PR simplifies the logic of chain tracer and also adds the unit tests.
The most important change has been made in this PR is the state management. Whenever a tracing state is acquired there is a corresponding release function be returned as well. It must be called once the state is used up, otherwise resource leaking can happen.
And also the logic of state management has been simplified a lot. Specifically, the state provider(eth backend, les backend) should ensure the state is available and referenced. State customers can use the state according to their own needs, or build other states based on the given state. But once the release function is called, there is no guarantee of the availability of the state.
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth/catalyst: warn less frequently if no beacon client is available
* eth/catalyst: tweak warning frequency a bit
* eth/catalyst: some more tweaks
* Update api.go
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/fetcher: introduce some lag in tx fetching
* eth/fetcher: change conditions a bit
* eth/fetcher: use per-batch quota check
* eth/fetcher: fix some comments
* eth/fetcher: address review concerns
* eth/fetcher: fix panic + add warn log
* eth/fetcher: fix log
* eth/fetcher: fix log
* cmd/devp2p/internal/ethtest: fix ignorign tx announcements from prev. tests
* cmd/devp2p/internal/ethtest: fix TestLargeTxRequest
This increases the number of tx relay messages the test waits for. Since
go-ethereum now processes incoming txs in smaller batches, the
announcement messages it sends are also smaller.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a cache for block logs which is shared by all filters. The cache
size of is configurable using the `--cache.blocklogs` flag.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR allows users to pass in a config object directly to the tracers. Previously only the struct logger was configurable.
It also adds an option to the call tracer which if enabled makes it ignore any subcall and collect only information about the top-level call. See #25419 for discussion.
The tracers will silently ignore if they are passed a config they don't care about.
* core: use TryGetAccount to read where TryUpdateAccount has been used to write
* Gary's review feedback
* implement Gary's suggestion
* fix bug + rename NewSecure into NewStateTrie
* trie: add backwards-compatibility aliases for SecureTrie
* Update database.go
* make the linter happy
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* eth: support bubbling up bad blocks from sync to the engine API
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* Update eth/catalyst/api.go
* eth/catalyst: when forgetting bad hashes, also forget descendants
* eth/catalyst: minor bad block tweaks for resilience
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Adds a native tracer that returns that in case of failure returns the error message or the revert reason of a transaction.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth/catalyst: disallow importing blocks via newPayload during snap sync
* eth/catalyst: make tests pass by using full sync only
* eth/catalysts: make the import delay a bit cleaner
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This changes the []byte <-> Uint8Array conversion to use an
ArrayBuffer, avoiding inefficient copying of the slice data in Goja.
Co-authored-by: Felix Lange <fjl@twurst.com>
The new protocol version removes support for GetNodeData.
See https://eips.ethereum.org/EIPS/eip-4938 for more information.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
Previously on Geth startup we just logged the chain config is a semi-json-y format. Whilst that worked while we had a handful of hard-forks defined, currently it's kind of unwieldy.
This PR converts that original data dump and converts it into a user friendly - alas multiline - log output.
This PR adds support for block overrides when doing debug_traceCall.
- Previously, debug_traceCall against pending erroneously used a common.Hash{} stateroot when looking up the state, meaning that a totally empty state was used -- so it always failed,
- With this change, we reject executing debug_traceCall against pending.
- And we add ability to override all evm-visible header fields.
#23773 added a JS tracer which uses Goja as its engine. In this PR I remove the previous tracer which used duktape as well as remove the dependencies.
This PR also comes with 2 fixes in the Goja tracer and one small behavioural change:
I had handled errors in the native Go functions by panicing. My oversight was that Goja only handles panics with a Goja.Value as argument. The difference is panic(goja.Value) allows JS to catch the exception whereas Interrupt(error) doesn't.
There was a race in how I handled Stop.
Because of 1. some of the methods that simply return nil on error (like memory.slice) now throw an exception.
This adds a JS tracer runtime environment based on the Goja VM. The new
runtime replaces the duktape runtime, which will be removed soon.
Goja is implemented in Go and is faster for cases where the Go <-> JS
transition overhead dominates overall performance. It is faster because
duktape is written in C, and the transition cost includes the cost of using
cgo. Another reason for using Goja is that go-duktape is not maintained
anymore.
We expect the performace of JS tracing to be at least as good or better with
this change.
* eth/catalyst: build the execution payload async
* miner: added comment, added test case
* eth/catalyst: miner: move async block production to miner
* eth/catalyst, miner: support generate seal block async
* miner: rework GetSealingBlockAsync to use a passed channel
* miner: apply rjl's diff
* eth/catalyst: nitpicks
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* eth/protocols/snap: don't include empty snapshot slot slice
This PR fixes the snapshot storage serving handler. In snap protocol
the response is capped by the response size. Server can cutdown the
response if the accumulated byte size exceeds the local hard limit.
It means we can meet a special scenario that there is no storage slot
included for a requested account, but we attach the proof for this
account by mistake.
So in the prover side, when it meets a empty storage response but with
a valid proof proves there are some more slots left in the trie, then
requestor will reject this response and disconnect with server.
In this PR, if there is no storage slot served for the requested account,
then no proof should be attached as well.
* eth/protocols/snap: loosen restrictions for flaky tests
* eth/catalyst: fix flaky test in catalyst
During mining, when a new head arrives and interrupts the block building, the block being built should not be commited (but discarded). Committing the interrupted block introduces unnecessary delay, and possibly causes miner to mine on the previous head, which could result in higher uncle rate.
* core: recover the state in SetChainHead if the head state is missing
* core: disable test logging
* core: address comment from martin
* core: improve log level in case state is recovered
* core, eth, les, light: rename SetChainHead to SetCanonical
This change removes extraneous/unnecessary checks for equality
when comparing 2 accessList values A and B. Given that we validate that
their lengths of A and B are equal, if so and if every element in A is
in B, reflexively every element in B is already in A. If that weren't
the case and an element g existed in A but not in B, that would mean
that there is an extra element and hence a mathematical contradiction.
Fixes#24658
* eth/downloader: remove stale beacon headers as backfilling progresses
* eth/downloader: remove leftover from a previous design
* eth/downloader: do partial beacon cleanups if chain is large
* eth/downloader: linter != heart
This adds a tools.go file to import all command packages used for
go:generate. Doing so makes it possible to execute go-based code
generators using 'go run', locking in the tool version using go.mod.
Co-authored-by: Felix Lange <fjl@twurst.com>
This commit replaces ioutil.TempDir with t.TempDir in tests. The
directory created by t.TempDir is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using ioutil.TempDir
had to be removed manually by calling os.RemoveAll, which is omitted in
some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but t.TempDir handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* eth/tracers: refactor traceTx to separate out struct logging
review fix
Update eth/tracers/api.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Mv ExecutionResult type to logger package
review fix
impl GetResult for StructLogger
make formatLogs private
confused exit and end..
account for intrinsicGas in structlogger, fix TraceCall test
Add Stop method to logger
Simplify traceTx
Fix test
rm logger from blockchain test
account for refund in structLogger
* use tx hooks in struct logger
* minor
* avoid executionResult in struct logger
* revert blockchain test changes
* core,eth: add empty tx logger hooks
* core,eth: add initial and remaining gas to tx hooks
* store tx gasLimit in js tracer
* use gasLimit to compute intrinsic cost for js tracer
* re-use rules in transitiondb
* rm logs
* rm logs
* Mv some fields from Start to TxStart
* simplify sender lookup in prestate tracer
* mv env to TxStart
* Revert "mv env to TxStart"
This reverts commit 656939634b9aff19f55a1cd167345faf8b1ec310.
* Revert "simplify sender lookup in prestate tracer"
This reverts commit ab65bce48007cab99e68232e7aac2fe008338d50.
* Revert "Mv some fields from Start to TxStart"
This reverts commit aa50d3d9b2559addc80df966111ef5fb5d0c1b6b.
* fix intrinsic gas for prestate tracer
* add comments
* refactor
* fix test case
* simplify consumedGas calc in prestate tracer
* eth/catalyst: only apply block if we actually have the state
* add header to payload queue
* Update cmd/geth/dbcmd.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/beacon: eth/catalyst: updated engine api to new version
* core: implement exchangeTransitionConfig
* core/beacon: prevRandao instead of Random
* eth/catalyst: Fix ExchangeTransitionConfig, add test
* eth/catalyst: stop external miners on TTD reached
* node: implement --authrpc.vhosts flag
* core: allow for config override on non-mainnet networks
* eth/catalyst: fix peters comments
* eth/catalyst: make stop remote sealer more explicit
* eth/catalyst: add log output
* cmd/utils: rename authrpc.host to authrpc.addr
* eth/catalyst: disable the disabling of the miner
* eth: core: remove notion of terminal pow block
* eth: les: more of peters nitpicks
* cmd, eth: Rename whitelist argument to peer.requiredblocks
* eth/ethconfig: document PeerRequiredBlocks better
* cmd/utils: rename new flag to --eth.requiredblocks
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/downloader: implement beacon sync
* eth/downloader: fix a crash if the beacon chain is reduced in length
* eth/downloader: fix beacon sync start/stop thrashing data race
* eth/downloader: use a non-nil pivot even in degenerate sync requests
* eth/downloader: don't touch internal state on beacon Head retrieval
* eth/downloader: fix spelling mistakes
* eth/downloader: fix some typos
* eth: integrate legacy/beacon sync switchover and UX
* eth: handle UX wise being stuck on post-merge TTD
* core, eth: integrate the beacon client with the beacon sync
* eth/catalyst: make some warning messages nicer
* eth/downloader: remove Ethereum 1&2 notions in favor of merge
* core/beacon, eth: clean up engine API returns a bit
* eth/downloader: add skeleton extension tests
* eth/catalyst: keep non-kiln spec, handle mining on ttd
* eth/downloader: add beacon header retrieval tests
* eth: fixed spelling, commented failing tests out
* eth/downloader: review fixes
* eth/downloader: drop peers failing to deliver beacon headers
* core/rawdb: track beacon sync data in db inspect
* eth: fix review concerns
* internal/web3ext: nit
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This PR adds the `NextBaseFeePerGas` to `Block` and `EffectiveTip` to `Transaction` to make it easier for clients to compute fee history themselves via graphql queries.
* rpc, node: refactor request validation and add jwt validation
* node, rpc: fix error message, ignore engine api in RegisterAPIs
* node: make authenticated port configurable
* eth/catalyst: enable unauthenticated version of engine api
* node: rework obtainjwtsecret (backport later)
* cmd/geth: added auth port flag
* node: happy lint, happy life
* node: refactor authenticated api
Modifies the authentication mechanism to use default values
* node: trim spaces and newline away from secret
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change makes use of the new code generator rlp/rlpgen to improve the
performance of RLP encoding for Header and StateAccount. It also speeds up
encoding of ReceiptForStorage using the new rlp.EncoderBuffer API.
The change is much less transparent than I wanted it to be, because Header and
StateAccount now have an EncodeRLP method defined with pointer receiver. It
used to be possible to encode non-pointer values of these types, but the new
method prevents that and attempting to encode unadressable values (even if
part of another value) will return an error. The error can be surprising and may
pop up in places that previously didn't expect any errors.
To make things work, I also needed to update all code paths (mostly in unit tests)
that lead to encoding of non-pointer values, and pass a pointer instead.
Benchmark results:
name old time/op new time/op delta
EncodeRLP/legacy-header-8 328ns ± 0% 237ns ± 1% -27.63% (p=0.000 n=8+8)
EncodeRLP/london-header-8 353ns ± 0% 247ns ± 1% -30.06% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 237ns ± 0% 123ns ± 0% -47.86% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 297ns ± 0% 301ns ± 1% +1.39% (p=0.000 n=8+8)
name old speed new speed delta
EncodeRLP/legacy-header-8 1.66GB/s ± 0% 2.29GB/s ± 1% +38.19% (p=0.000 n=8+8)
EncodeRLP/london-header-8 1.55GB/s ± 0% 2.22GB/s ± 1% +42.99% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 38.0MB/s ± 0% 64.8MB/s ± 0% +70.48% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 910MB/s ± 0% 897MB/s ± 1% -1.37% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
EncodeRLP/legacy-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/london-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/receipt-for-storage-8 64.0B ± 0% 0.0B -100.00% (p=0.000 n=8+8)
EncodeRLP/receipt-full-8 320B ± 0% 320B ± 0% ~ (all equal)
* eth/tracers: add initial native prestate tracer
* fix balance hex
* handle prestate for tx from and to
* drop created contract from prestate
* fix sender balance
* use switch instead
Co-authored-by: Martin Holst Swende <martin@swende.se>
* minor fix
* lookup create2 account
* mv code around a bit
* check stackLen for create2
* fix transfer tx for js prestate tracer
* fix create2 addr
* track extcodehash in js prestate tracer
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth, miner: remove duplicated code
* eth/catalyst: remove unneeded code
* miner: keep update pending state even the Merge is happened
* eth, miner: rebase
* miner: fix tests
* eth, miner: address comments from marius
* miner: use empty zero randomness for pending blocks after the merge
* eth/catalyst: gofmt
* miner: add warning log for state recovery
* miner: ignore uncles for post-merge blocks
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth/catalyst: evict old payloads, type PayloadID
* eth/catalyst: added tracing info to engine api
* eth/catalyst: add test for create payload timestamps
* catalyst: better logs
* eth/catalyst: computePayloadId return style
* catalyst: add queue for payloads
* eth/catalyst: nitpicks
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core: implement eip-4399 random opcode
* core: make vmconfig threadsafe
* core: miner: pass vmConfig by value not reference
* all: enable 4399 by Rules
* core: remove diff (f)
* tests: set proper difficulty (f)
* smaller diff (f)
* eth/catalyst: nit
* core: make RANDOM a pointer which is only set post-merge
* cmd/evm/internal/t8ntool: fix t8n tracing of 4399
* tests: set difficulty
* cmd/evm/internal/t8ntool: check that baserules are london before applying the merge chainrules
This PR reduces the amount of work we do when answering header queries, e.g. when a peer
is syncing from us.
For some items, e.g block bodies, when we read the rlp-data from database, we plug it
directly into the response package. We didn't do that for headers, but instead read
headers-rlp, decode to types.Header, and re-encode to rlp. This PR changes that to keep it
in RLP-form as much as possible. When a node is syncing from us, it typically requests 192
contiguous headers. On master it has the following effect:
- For headers not in ancient: 2 db lookups. One for translating hash->number (even though
the request is by number), and another for reading by hash (this latter one is sometimes
cached).
- For headers in ancient: 1 file lookup/syscall for translating hash->number (even though
the request is by number), and another for reading the header itself. After this, it
also performes a hashing of the header, to ensure that the hash is what it expected. In
this PR, I instead move the logic for "give me a sequence of blocks" into the lower
layers, where the database can determine how and what to read from leveldb and/or
ancients.
There are basically four types of requests; three of them are improved this way. The
fourth, by hash going backwards, is more tricky to optimize. However, since we know that
the gap is 0, we can look up by the parentHash, and stlil shave off all the number->hash
lookups.
The gapped collection can be optimized similarly, as a follow-up, at least in three out of
four cases.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/tracers: Add support for REVERT in evmdis_tracer
* evm/tracers: Fix evmdis_tracer to use SELFDESTRUCT instead of SUICIDE
* eth/tracers: Regenerate tracer library
* core/vm: Move interpreter.ReadOnly check into the opcode implementations
Also remove the same check from the interpreter inner loop.
* core/vm: Remove obsolete operation.writes flag
* core/vm: Capture fault states in logger
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/vm: Remove panic added for testing
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: mv loggers to eth/tracers
* core/vm: minor
* eth/tracers: tmp comment out testStoreCapture
* eth/tracers: uncomment and fix logger test
* eth/tracers: simplify test
* core/vm: re-add license
* core/vm: minor
* rename LogConfig to Config
Some benchmarks in eth/filters were not good: they weren't reproducible, relying on geth chaindata to be present.
Another one was rejected because the receipt was lacking a backing transcation.
The p2p simulation benchmark had a lot of the warnings below, due to the framework calling both
Stop() and Close(). Apparently, the simulated adapter is the only implementation which has a Close(),
and there is no need to call both Stop and Close on it.
This doesn't fix all go-critic warnings, just the most serious ones.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth,rpc: allow for flag configured timeouts for eth_call
* lint: account for package-local import order
* cr: rename `rpc.calltimeout` to `rpc.evmtimeout`
This removes some code:
- The clique engine calculated the snapshot twice when verifying headers/blocks.
- The method GetBlockHashesFromHash in Header/Block/Lightchain was only used by tests. It
is now removed from the API.
- The method GetTdByHash internally looked up the number before calling GetTd(hash, num).
In many cases, callers already had the number, and used this method just because it has a
shorter name. I have removed the method to make the API surface smaller.
This fixes a data race on worker.current by moving the call to StopPrefetcher
into the main loop.
The commit also contains fixes for two other races in unit tests of unrelated packages.
Fixes#23681
After the fix I get the address 0x6d6d02e83c4ced98204e20126acf27e9d87b8af2 for the
tx mentioned in the ticket, which agrees with etherscan.
The test did not synchronize with per-case goroutines, and thus didn't notice
that some tests were just hanging. This change adds missing synchronization
and fixes the broken tests.
This PR fixes an issue in traceChain, where the statedb Commit operation was performed asynchronously with dereference-operations agains the underlying trie.Database instance. Due to how the reference counting works within the trie database (where parent count is recursively updated when new parents are added), doing dereferencing in the middle of Commit can cause the refcount to become wrong, leading to an inconsistent state.
This was fixed by doing Commit/Deref from the same routine.
* core/types: rm extranous check in test
* core/rawdb: add lightweight types for block logs
* core/rawdb,eth: use lightweight accessor for log filtering
* core/rawdb: add bench for decoding into rlpLogs
This PR implements a new debug method, which I've talked briefly about to some other client developers. It allows the caller to obtain the intermediate state roots for a block (which might be either a canon block or a 'bad' block).
This change introduces 2 new optional methods; `enter()` and `exit()` for js tracers, and makes `step()` optiona. The two new methods are invoked when entering and exiting a call frame (but not invoked for the outermost scope, which has it's own methods). Currently these are the data fields passed to each of them:
enter: type (opcode), from, to, input, gas, value
exit: output, gasUsed, error
The PR also comes with a re-write of the callTracer. As a backup we keep the previous tracing script under the name `callTracerLegacy`. Behaviour of both tracers are equivalent for the most part, although there are some small differences (improvements), where the new tracer is more correct / has more information.
This adds a check to verify that a sender-account does not have code, which means that the codehash is either `emptyCodeHash` _OR_ not present. The latter occurs IFF the sender did not previously exist, a situation which can only occur with zero cost gasprices.
* internal/ethapi/api: use hexutil.uint for blockCount parameter instead of int for feeHistory
* return hex value for oldestBlock instead of number
* return uint64 from oracle.resolveBlockRange
* eth/gasprice: fixed test
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
When processing a transaction with London fork rules, EIP-1559 mandates
checking that the sender must have sufficient balance to cover gas * gasFeeCap.
In the EIP's pseudocode, this check happens after the value transferred by the
transaction has already been deducted. However, in go-ethereum, the balance
has not yet been updated when the check happens, and therefore needs to be
added explicitly.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Some tests take quite some time during exit, which I think causes
some appveyor fails like this:
https://ci.appveyor.com/project/ethereum/go-ethereum/builds/39511210/job/xhom84eg2e4uulq3
One of the things that seem to take time during exit is waiting
(up to 100ms) for the syncbloom to close. This PR changes it to use
a channel, instead of looping with a 100ms wait.
This also includes some unrelated changes improving the reliability of
eth/fetcher tests, which fail a lot because they are time-dependent.
* core,eth/tracers: make isPrecompiled dependent on HF
* eth/tracers: use keys when constructing chain config struct
* eth/tracers: dont initialize activePrecompiles with random value
This change increases the cache size from 64 to 256 Mb for block bodies.
Benchmarks have shown this to be one bottleneck when trying to achieve
higher download speeds.
The commit also includes a minor optimization for header inserts in package
core: previously, the presence of headers in the database was checked for
every header before writing it. With the change, if one header fails the
presence check, all subsequent headers are also assumed to be missing.
This is an improvement because in practice, the headers are almost always
missing during sync.
* accounts/abi/bind: fix bounded contracts and sim backend for 1559
* accounts/abi/bind, ethclient: don't rely on chain config for gas prices
* all: enable London for all internal tests
* les: get receipt type info in les tests
* les: fix weird test
Co-authored-by: Martin Holst Swende <martin@swende.se>
