* cmd/utils: make goerli the default testnet
* cmd/geth: explicitly rename testnet to ropsten
* core: explicitly rename testnet to ropsten
* params: explicitly rename testnet to ropsten
* cmd: explicitly rename testnet to ropsten
* miner: explicitly rename testnet to ropsten
* mobile: allow for returning the goerli spec
* tests: explicitly rename testnet to ropsten
* docs: update readme to reflect changes to the default testnet
* mobile: allow for configuring goerli and rinkeby nodes
* cmd/geth: revert --testnet back to ropsten and mark as legacy
* cmd/util: mark --testnet flag as deprecated
* docs: update readme to properly reflect the 3 testnets
* cmd/utils: add an explicit deprecation warning on startup
* cmd/utils: swap goerli and ropsten in usage
* cmd/geth: swap goerli and ropsten in usage
* cmd/geth: if running a known preset, log it for convenience
* docs: improve readme on usage of ropsten's testnet datadir
* cmd/utils: check if legacy `testnet` datadir exists for ropsten
* cmd/geth: check for legacy testnet path in console command
* cmd/geth: use switch statement for complex conditions in main
* cmd/geth: move known preset log statement to the very top
* cmd/utils: create new ropsten configurations in the ropsten datadir
* cmd/utils: makedatadir should check for existing testnet dir
* cmd/geth: add legacy testnet flag to the copy db command
* cmd/geth: add legacy testnet flag to the inspect command
This improves error messages when the file is too short or too long.
Also rewrite the test for SaveECDSA because LoadECDSA has its own
test now.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change makes it possible to run geth with JSON-RPC over HTTP and
WebSocket on the same TCP port. The default port for WebSocket
is still 8546.
geth --rpc --rpcport 8545 --ws --wsport 8545
This also removes a lot of deprecated API surface from package rpc.
The rpc package is now purely about serving JSON-RPC and no longer
provides a way to start an HTTP server.
* node: expose config in service context
* eth: integrate p2p/dnsdisc
* cmd/geth: add some DNS flags
* eth: remove DNS URLs
* cmd/utils: configure DNS names for testnets
* params: update DNS URLs
* cmd/geth: configure mainnet DNS
* cmd/utils: rename DNS flag and fix flag processing
* cmd/utils: remove debug print
* node: fix test
Adds the 'geth dumpgenesis' command, which writes the configured
genesis in JSON format to stdout. This provides a way to generate the
data (structure and content) that can then be used with the 'geth init'
command.
This replaces the JavaScript interpreter used by the console with goja,
which is actively maintained and a lot faster than otto. Clef still uses otto
and eth/tracers still uses duktape, so we are currently dependent on three
different JS interpreters. We're looking to replace the remaining uses of otto
soon though.
* log: delete RotatingFileHandler
We added this for the dashboard, which is gone now. The
handler never really worked well and had data race and file
handling issues.
* internal/debug: remove unused RotatingFileHandler setup code
This removes the dashboard project. The dashboard was an experimental
browser UI for geth which displayed metrics and chain information in
real time. We are removing it because it has marginal utility and nobody
on the team can maintain it.
Removing the dashboard removes a lot of dependency code and shaves
6 MB off the geth binary size.
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.
* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
Most of these changes are related to the Go 1.13 changes to test binary
flag handling.
* cmd/geth: make attach tests more reliable
This makes the test wait for the endpoint to come up by polling
it instead of waiting for two seconds.
* tests: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* crypto/ecies: remove useless -dump flag in tests
* p2p/simulations: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* build: remove workaround for ./... vendor matching
This workaround was necessary for Go 1.8. The Go 1.9 release changed
the expansion rules to exclude vendored packages.
* Makefile: use relative path for GOBIN
This makes the "Run ./build/bin/..." line look nicer.
* les: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* Ref #19906 - replace passPHRASE with passWORD in any user interactions
this skips doccomments and variablenames to minimize impact. It does
however include a rename of the `ethkey` `changepassphrase` parameter
* console: fix JavaScript error capitalization
* core/state, cmd/geth: streaming json output dump cmd + optional code+storage
* dump: add option to continue even if preimages are missing
* core, evm: lint nits
* cmd: use local flags for dump, omit empty code/storage
* core/state: fix state dump test
* Add retesteth command
* Remove label and insert full version
* mineBlock - break the inner loop when the block is full
* Fixes for touched non-reward accounts, gas limit issues
* Not fail when SendTx has transaction with incorrect RLP
* Fix linter (unnecessary conversion)
* retesteth: add usage string to flag
* accounts/scwallet: Add a switch to enable smartcard support
* accounts: change the meaning of the switch
* disable card support in windows until tested
* only activate account if pcscd socket file is present
* the switch is now the path to the socket file
* accounts/scwallet: holiman's review feedback
* accounts/scwallet: send the path to go-pcsclite
* accounts/scwallet: add default, per platform path
* accounts/scwallet: fix error log warning
* accounts/scwallet: update pcsc lib to latest
* accounts/scwallet: use default path from pcsclite
* scwallet: forgot to change switch name
* cmd: minor style cleanups (error handling first, then happy path)
* core, eth: some fixes for freezer
* vendor, core/rawdb, cmd/geth: add db inspector
* core, cmd/utils: check ancient store path forceily
* cmd/geth, common, core/rawdb: a few fixes
* cmd/geth: support windows file rename and fix rename error
* core: support ancient plugin
* core, cmd: streaming file copy
* cmd, consensus, core, tests: keep genesis in leveldb
* core: write txlookup during ancient init
* core: bump database version
* core, eth, trie: bloom filter for trie node dedup during fast sync
* eth/downloader, trie: address review comments
* core, ethdb, trie: restart fast-sync bloom construction now and again
* eth/downloader: initialize fast sync bloom on startup
* eth: reenable eth/62 until we properly remove it
* add-date-to unstable
* fields-insteadof-split
* internal/build: support building with missing git
* docker: add git history back to support commit date in version
* internal/build: use PR commits hashes for PR builds
* accounts: add note about backing up the keystore
* cmd, accounts: move the printout to accountCreate
* internal, signer: add info when new account is created via rpc
* cmd, internal, signer: split logs
* cmd/geth: make account new output a bit more verbose
This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
* node: close AccountsManager in new Close method
* p2p/simulations, p2p/simulations/adapters: handle node close on shutdown
* node: move node ephemeralKeystore cleanup to stop method
* node: call Stop in Node.Close method
* cmd/geth: close node.Node created with makeFullNode in cli commands
* node: close Node instances in tests
* cmd/geth, node: minor code style fixes
* cmd, console, miner, mobile: proper node Close() termination
* cmd, eth: Added in the flag to step geth once sync based on input
* cmd, eth: 16400 Add an option to stop geth once in sync.
* cmd: 16400 Add an option to stop geth once in sync. WIP
* cmd/geth/main, les/fletcher: added in light mode support
* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode
* cmd: 16400 Fixed formatting issue and cleaned code
* cmd, eth, les: 16400 Fixed formatting issues
* cmd, eth, les: Performed gofmt to update formatting
* cmd, eth, les: Fixed bugs resulting formatting
* cmd/geth, eth/, les: switched to downloader event
* eth: Fixed styling and gen_config
* eth/: Fix nil error in config file
* cmd/geth: Updated countdown log
* les/fetcher.go: Removed depcreated channel
* eth/downloader.go: Removed deprecated select
* cmd/geth, cmd/utils: Fixed minor issues
* eth: Reverted config files to proper format
* eth: Fixed typo in config file
* cmd/geth, eth/down: Updated code to use header time stamp
* eth/downloader: Changed the time threshold to 10 minutes
* cmd/geth, eth/downloader: Updated downloading event to pass latest header
* cmd/geth: Updated main to use right timer object
* cmd/geth: Removed unused failed event
* cmd/geth: added in correct time field with type assertion
* cmd/geth, cmd/utils: Updated flag to use boolean
* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations
* cmd/geth: Removed unneeded import
* cmd/geth, eth/downloader: fixed event field and suggested changes
* cmd/geth, cmd/utils: Updated flag and linting issue
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.
This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* build: add support for different package and binary names
* build: bump up copyright date
* build: change default PackageName to empty string
* build, internal, swarm: enhance build/release process
* build: hack ethereum-swarm as a "depends" in deb package
* build/ci: remove redundant variables
* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;
* internal: remove VERSION() method which reads VERSION file
* build: fix VersionFilePath to Version
* Makefile: remove clean_go_build_cache.sh until it works
* Makefile: revert removal of clean_go_build_cache.sh
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* dashboard: footer, deep state update
* dashboard: resolve asset path
* dashboard: remove bundle.js
* dashboard: prevent state update on every reconnection
* dashboard: fix linter issue
* dashboard, cmd: minor UI fix, include commit hash
* remove geth binary
* dashboard: gitCommit renamed to commit
* dashboard: move the geth version to the right, make commit optional
* dashboard: commit limited to 7 characters
* dashboard: limit commit length on client side
* dashboard: run go generate
* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
This patch updates the Address type in common/types.go so that the Hex
function provides an EIP55-compliant output string. The implementation is pretty lightweight;
on my laptop the benchmark gives 1100ns/op, with the majority of that value due to the Keccak hash.
* core: reduce txpool event loop goroutines and sync structs
* cmd, core, eth: journal local transactions to disk
* core: journal replacement pending transactions too
* core: separate transaction journal from pool
With this commit, core/state's access to the underlying key/value database is
mediated through an interface. Database errors are tracked in StateDB and
returned by CommitTo or the new Error method.
Motivation for this change: We can remove the light client's duplicated copy of
core/state. The light client now supports node iteration, so tracing and storage
enumeration can work with the light client (not implemented in this commit).
