Commit Graph

23 Commits

Author SHA1 Message Date
holisticode
88168ff5c5 Stream subscriptions (#18355)
* swarm/network: eachBin now starts at kaddepth for nn

* swarm/network: fix Kademlia.EachBin

* swarm/network: fix kademlia.EachBin

* swarm/network: correct EachBin implementation according to requirements

* swarm/network: less addresses simplified tests

* swarm: calc kad depth outside loop in EachBin test

* swarm/network: removed printResults

* swarm/network: cleanup imports

* swarm/network: remove kademlia.EachBin; fix RequestSubscriptions and add unit test

* swarm/network/stream: address PR comments

* swarm/network/stream: package-wide subscriptionFunc

* swarm/network/stream: refactor to kad.EachConn
2019-01-11 15:08:09 +01:00
lash
7240f4d800 swarm/network: Rename minproxbinsize, add as member of simulation (#18408)
* swarm/network: Rename minproxbinsize, add as member of simulation

* swarm/network: Deactivate WaitTillHealthy, unreliable pending suggestpeer
2019-01-10 12:33:51 +01:00
Janoš Guljaš
d70c4faf20 swarm: Fix T.Fatal inside a goroutine in tests (#18409)
* swarm/storage: fix T.Fatal inside a goroutine

* swarm/network/simulation: fix T.Fatal inside a goroutine

* swarm/network/stream: fix T.Fatal inside a goroutine

* swarm/network/simulation: consistent failures in TestPeerEventsTimeout

* swarm/network/simulation: rename sendRunSignal to triggerSimulationRun
2019-01-09 07:05:55 +01:00
lash
5e4fd8e7db swarm/network: Revised depth and health for Kademlia (#18354)
* swarm/network: Revised depth calculation with tests

* swarm/network: WIP remove redundant "full" function

* swarm/network: WIP peerpot refactor

* swarm/network: Make test methods submethod of peerpot and embed kad

* swarm/network: Remove commented out code

* swarm/network: Rename health test functions

* swarm/network: Too many n's

* swarm/network: Change hive Healthy func to accept addresses

* swarm/network: Add Healthy proxy method for api in hive

* swarm/network: Skip failing test out of scope for PR

* swarm/network: Skip all tests dependent on SuggestPeers

* swarm/network: Remove commented code and useless kad Pof member

* swarm/network: Remove more unused code, add counter on depth test errors

* swarm/network: WIP Create Healthy assertion tests

* swarm/network: Roll back health related methods receiver change

* swarm/network: Hardwire network minproxbinsize in swarm sim

* swarm/network: Rework Health test to strict

Pending add test for saturation
And add test for as many as possible up to saturation

* swarm/network: Skip discovery tests (dependent on SuggestPeer)

* swarm/network: Remove useless minProxBinSize in stream

* swarm/network: Remove unnecessary testing.T param to assert health

* swarm/network: Implement t.Helper() in checkHealth

* swarm/network: Rename check back to assert now that we have helper magic

* swarm/network: Revert WaitTillHealthy change (deferred to nxt PR)

* swarm/network: Kademlia tests GotNN => ConnectNN

* swarm/network: Renames and comments

* swarm/network: Add comments
2018-12-22 06:53:30 +01:00
Elad
472c23a801 p2p/simulation: move connection methods from swarm/network/simulation (#18323) 2018-12-17 12:19:01 +01:00
lash
1cd007ecae swarm/network: Correct neighborhood depth (#18066) 2018-11-26 17:13:59 +01:00
Janoš Guljaš
070caec4bd swarm/network/stream: use swarm/mock/mem as mock global store (#18157) 2018-11-21 20:49:13 +01:00
holisticode
ffe2fc3bc4 Swarm accounting (#18050)
* swarm: completed 1st phase of swap accounting

* swarm: swap accounting for swarm with p2p accounting

* swarm/swap: addressed PR comments

* swarm/swap: ignore ErrNotFound on stateStore.Get()

* swarm/swap: GetPeerBalance test; add TODO for chequebook API check

* swarm/network/stream: fix NewRegistry calls with new arguments

* swarm/swap: address @justelad's PR comments
2018-11-15 23:41:19 +01:00
Janoš Guljaš
324027640b swarm/network/simulation: use simulations.Event instead p2p.PeerEvent (#18098) 2018-11-15 21:06:27 +01:00
Alexey Sharov
eb8fa3cc89 cmd/swarm, swarm/api/http, swarm/bmt, swarm/fuse, swarm/network/stream, swarm/storage, swarm/storage/encryption, swarm/testutil: use pseudo-random instead of crypto-random for test files content generation (#18083)
- Replace "crypto/rand" to "math/rand" for files content generation
- Remove swarm/network_test.go.Shuffle and swarm/btm/btm_test.go.Shuffle - because go1.9 support dropped (see https://github.com/ethereum/go-ethereum/pull/17807 and comments to swarm/network_test.go.Shuffle)
2018-11-14 09:21:14 +01:00
holisticode
79c7a69ac8 swarm: Better syncing and retrieval option definition (#17986)
* swarm: Better syncing and retrieval option definition

* swarm/network/stream: better comments

* swarm/network/stream: addressed PR comments
2018-11-07 00:04:18 +01:00
Elad
aeb733623e swarm/network: disallow historical retrieval requests (#17936) 2018-10-19 10:50:25 +02:00
Attila Gazso
cdf5982cfc swarm: Lightnode mode: disable sync, retrieve, subscription (#17899)
* swarm: Lightnode mode: disable sync, retrieve, subscription

* swarm/network/stream: assign error and check in one line

* swarm: restructured RegistryOption initializing

* swarm: empty commit to retrigger CI build

* swarm/network/stream: Added comments explaining RegistryOptions
2018-10-17 19:22:37 +02:00
holisticode
11d0ff6578 Fix retrieval tests and simulation backends (#17723)
* swarm/network/stream: introduced visualized snapshot sync test

* swarm/network/stream: non-existing hash visualization sim

* swarm/network/stream: fixed retrieval tests; new backend for visualization

* swarm/network/stream: cleanup of visualized_snapshot_sync_sim_test.go

* swarm/network/stream: rebased PR on master

* swarm/network/stream: fixed loop logic in retrieval tests

* swarm/network/stream: fixed iterations for snapshot tests

* swarm/network/stream: address PR comments

* swarm/network/stream: addressed PR comments
2018-10-08 20:28:44 +02:00
Felix Lange
30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
Balint Gabor
3ff2f75636
swarm: Chunk refactor (#17659)
Co-authored-by: Janos Guljas <janos@resenje.org>
Co-authored-by: Balint Gabor <balint.g@gmail.com>
Co-authored-by: Anton Evangelatov <anton.evangelatov@gmail.com>
Co-authored-by: Viktor Trón <viktor.tron@gmail.com>
2018-09-13 11:42:19 +02:00
Viktor Trón
bfce00385f Kademlia refactor (#17641)
* swarm/network: simplify kademlia/hive; rid interfaces

* swarm, swarm/network/stream, swarm/netork/simulations,, swarm/pss: adapt to new Kad API

* swarm/network: minor changes re review; add missing lock to NeighbourhoodDepthC
2018-09-12 11:24:56 +02:00
Wenbiao Zheng
d1aa605f1e all: remove the duplicate 'the' in annotations (#17509) 2018-08-27 11:49:29 +03:00
Janoš Guljaš
a72ba5a55b cmd/swarm, swarm: various test fixes (#17299)
* swarm/network/simulation: increase the sleep duration for TestRun

* cmd/swarm, swarm: fix failing tests on mac

* cmd/swarm: update TestCLISwarmFs skip comment

* swarm/network/simulation: adjust disconnections on simulation close

* swarm/network/simulation: call cleanups after net shutdown
2018-08-06 12:33:22 +03:00
holisticode
d6efa69187 Merge netsim mig to master (#17241)
* swarm: merged stream-tests migration to develop

* swarm/network: expose simulation RandomUpNode to use in stream tests

* swarm/network: wait for subs in PeerEvents and fix stream.runSyncTest

* swarm: enforce waitkademlia for snapshot tests

* swarm: fixed syncer tests and snapshot_sync_test

* swarm: linting of simulation package

* swarm: address review comments

* swarm/network/stream: fix delivery_test bugs and refactor

* swarm/network/stream: addressed PR comments @janos

* swarm/network/stream: enforce waitKademlia, improve TestIntervals

* swarm/network/stream: TestIntervals not waiting for chunk to be stored
2018-07-30 22:55:25 +02:00
Anton Evangelatov
7c9314f231 swarm: integrate OpenTracing; propagate ctx to internal APIs (#17169)
* swarm: propagate ctx, enable opentracing

* swarm/tracing: log error when tracing is misconfigured
2018-07-13 17:40:28 +02:00
Anton Evangelatov
b3711af051 swarm: ctx propagation; bmt fixes; pss generic notification framework (#17150)
* cmd/swarm: minor cli flag text adjustments

* swarm/api/http: sticky footer for swarm landing page using flex

* swarm/api/http: sticky footer for error pages and fix for multiple choices

* cmd/swarm, swarm/storage, swarm: fix  mingw on windows test issues

* cmd/swarm: update description of swarm cmd

* swarm: added network ID test

* cmd/swarm: support for smoke tests on the production swarm cluster

* cmd/swarm/swarm-smoke: simplify cluster logic as per suggestion

* swarm: propagate ctx to internal apis (#754)

* swarm/metrics: collect disk measurements

* swarm/bmt: fix io.Writer interface

  * Write now tolerates arbitrary variable buffers
  * added variable buffer tests
  * Write loop and finalise optimisation
  * refactor / rename
  * add tests for empty input

* swarm/pss: (UPDATE) Generic notifications package (#744)

swarm/pss: Generic package for creating pss notification svcs

* swarm: Adding context to more functions

* swarm/api: change colour of landing page in templates

* swarm/api: change landing page to react to enter keypress
2018-07-09 14:11:49 +02:00
ethersphere
e187711c65 swarm: network rewrite merge 2018-06-21 21:10:31 +02:00