Commit Graph

12 Commits

Author SHA1 Message Date
Christian Muehlhaeuser
a32a2b933a cmd, contracts, eth, p2p, signer, whisper: fixed ineffectual assignments (#19869)
Fixed assigning values to variables we don't end up using.
2019-07-22 13:34:41 +03:00
lash
cdadf57bf9 p2p/simulations: Enable access to MsgEvents with execadapter (#19749) 2019-06-21 13:45:32 +02:00
lash
2f5b6cb442 swarm/network: Use different privatekey for bzz overlay in sim (#19313)
* cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter

* cmd/p2p/swarm: Remove comments + config.Enode nomarshal

* p2p/simulations: Remove superfluous error check

* p2p/simulation: Move init enode comment

* swarm, p2p/simulations, cmd/swarm: Use nodekey in binary record sign

* swarm/network, swarm/pss: Dervice bzzkey

* swarm/pss: Remove unused function

* swarm/network: Store swarm private key in simulation bucket

* swarm/pss: Shorten TextProxNetwork shortrunning test timeout

* swarm/pss: Increase prox test timeout

* swarm/pss: Increase timeout slightly on shortrunning proxtest

* swarm/network: Simplify bucket instantiation in servicectx func

* p2p/simulations: Tcpport -> udpport

* swarm/network, swarm/pss: Simplify + correct lock in servicefunc sim

* swarm/network: Cleanup after rebase on extract swarm enode new

* p2p/simulations, swarm/network: Make exec disc test pass

* swarm/network: Prune ye olde comment

* swarm/pss: Correct revised bzzkey method call

* swarm/network: Clarify comment about privatekey generation data

* swarm/pss: Fix syntax errors after rebase

* swarm/network: Rename misleadingly named method

(amend commit to trigger ci - attempt 5)
2019-03-22 21:37:25 +01:00
lash
09924cbcaa cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter (#19309)
* cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter

* cmd/p2p/swarm: Remove comments + config.Enode nomarshal

* p2p/simulations: Remove superfluous error check

* p2p/simulation: Move init enode comment

* swarm/api: Check error in config test

* swarm, p2p/simulations, cmd/swarm: Use nodekey in binary record sign

* cmd/swarm: Make nodekey available for swarm api config
2019-03-22 05:55:47 +01:00
Felföldi Zsolt
c2003ed63b les, les/flowcontrol: improved request serving and flow control (#18230)
This change

- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
  benchmarks which gives much more consistent results. Until now the
  allowed number of light peers was just a guess which probably contributed
  a lot to the fluctuating quality of available service. Everything related
  to request cost is implemented in a single object, the 'cost tracker'. It
  uses a fixed cost table with a global 'correction factor'. Benchmark code
  is included and can be run at any time to adapt costs to low-level
  implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
  way, with added capabilities: There is now control over bandwidth, which
  allows using the flow control parameters for client prioritization.
  Target utilization over 100 percent is now supported to model concurrent
  request processing. Total serving bandwidth is reduced during block
  processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
  assign priority bandwidth to certain clients and change prioritized
  status even while the client is connected. The new API is meant for
  cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
  control functions through the new API.
2019-02-26 12:32:48 +01:00
Ferenc Szabo
fe03b76ffe A few minor code inspection fixes (#18393)
* swarm/network: fix code inspection problems

- typos
- redundant import alias

* p2p/simulations: fix code inspection problems

- typos
- unused function parameters
- redundant import alias
- code style issue: snake case

* swarm/network: fix unused method parameters inspections
2019-01-06 11:58:57 +01:00
Felix Lange
dcae0d348b
p2p/simulations: fix a deadlock and clean up adapters (#17891)
This fixes a rare deadlock with the inproc adapter:

- A node is stopped, which acquires Network.lock.
- The protocol code being simulated (swarm/network in my case)
  waits for its goroutines to shut down.
- One of those goroutines calls into the simulation to add a peer,
  which waits for Network.lock.

The fix for the deadlock is really simple, just release the lock
before stopping the simulation node.

Other changes in this PR clean up the exec adapter so it reports
node startup errors better and remove the docker adapter because
it just adds overhead.

In the exec adapter, node information is now posted to a one-shot
server. This avoids log parsing and allows reporting startup
errors to the simulation host.

A small change in package node was needed because simulation
nodes use port zero. Node.{HTTP,WS}Endpoint now return the live
endpoints after startup by checking the TCP listener.
2018-10-11 20:32:14 +02:00
Felix Lange
30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
Elad
1836366ac1 all: library changes for swarm-network-rewrite (#16898)
This commit adds all changes needed for the merge of swarm-network-rewrite.
The changes:

- build: increase linter timeout
- contracts/ens: export ensNode
- log: add Output method and enable fractional seconds in format
- metrics: relax test timeout
- p2p: reduced some log levels, updates to simulation packages
- rpc: increased maxClientSubscriptionBuffer to 20000
2018-06-14 11:21:17 +02:00
Ivan Daniluk
c4a4613d95 p2p/simulations/adapters: fix websocket log line parsing in exec adapter (#16667) 2018-05-08 17:05:27 +02:00
Lewis Marshall
54aeb8e4c0 p2p/simulations: various stability fixes (#15198)
p2p/simulations: introduce dialBan

- Refactor simulations/network connection getters to support
  avoiding simultaneous dials between two peers If two peers dial
  simultaneously, the connection will be dropped to help avoid
  that, we essentially lock the connection object with a
  timestamp which serves as a ban on dialing for a period of time
  (dialBanTimeout).

- The connection getter InitConn can be wrapped and passed to the
  nodes via adapters.NodeConfig#Reachable field and then used by
  the respective services when they initiate connections. This
  massively stablise the emerging connectivity when running with
  hundreds of nodes bootstrapping a network.

p2p: add Inbound public method to p2p.Peer

p2p/simulations: Add server id to logs to support debugging
in-memory network simulations when multiple peers are logging.

p2p: SetupConn now returns error. The dialer checks the error and
only calls resolve if the actual TCP dial fails.
2017-12-01 12:49:04 +01:00
Lewis Marshall
9feec51e2d p2p: add network simulation framework (#14982)
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
2017-09-25 10:08:07 +02:00