* eth/tracers: fix gasUsed in call tracer
* fix js tracers gasUsed
* fix legacy prestate tracer
* fix restGas in test
* drop intrinsicGas field from js tracers
The prestate tracer did not report accounts that existed at a given address prior to a contract being created at that address.
Signed-off-by: Delweng <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
In some cases, inner contract creation may not be successful, and an inner contract was not created. This PR fixes a crash that could occur when doing tracing in such situations.
This PR adds a way to subscribe to the _full_ pending transactions, as opposed to just being notified about hashes.
In use cases where client subscribes to newPendingTransactions and gets txhashes only to then request the actual transaction, the caller can now shortcut that flow and obtain the transactions directly.
Co-authored-by: Felix Lange <fjl@twurst.com>
Prior to this change, f.begin (and possibly end) stay negative, leading to strange results later in the code. With this change, filters using "safe" and "finalized" block produce results consistent w/ the overall behavior of this RPC method.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* ethclient/gethclient: improve time-sensitive flaky test
* eth/catalyst: fix (?) flaky test
* core: stop blockchains in tests after use
* core: fix dangling blockchain instances
* core: rm whitespace
* eth/gasprice, eth/tracers, consensus/clique: stop dangling blockchains in tests
* all: address review concerns
* core: goimports
* eth/catalyst: fix another time-sensitive test
* consensus/clique: add snapshot test run function
* core: rename stop() to stopWithoutSaving()
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR introduces a new mechanism in chain tracer for preventing creating too many trace states.
The workflow of chain tracer can be divided into several parts:
- state creator generates trace state in a thread
- state tracer retrieves the trace state and applies the tracing on top in another thread
- state collector gathers all result from state tracer and stream to users
It's basically a producer-consumer model here, while if we imagine that the state producer generates states too fast, then it will lead to accumulate lots of unused states in memory. Even worse, in path-based state scheme it will only keep the latest 128 states in memory, and the newly generated state will invalidate the oldest one by marking it as stale.
The solution for fixing it is to limit the speed of state generation. If there are over 128 states un-consumed in memory, then the creation will be paused until the states are be consumed properly.
Backwards compatibility warning: The result will from now on omit empty fields instead
of including a zero value (e.g. no more `balance: '0x'`).
The prestateTracer will now take an option `diffMode: bool`. In this mode
the tracer will output the pre state and post data for the modified parts of state.
Read-only accesses will be completely omitted. Creations (be it account or slot)
will be signified by omission in the `pre` list and inclusion in `post`. Whereas
deletion (be it account or slot) will be signified by inclusion in `pre` and omission
in `post` list.
Signed-off-by: Delweng <delweng@gmail.com>
This PR makes it so that the snap server responds to trie heal requests when possible, even if the snapshot does not exist. The idea being that it might prolong the lifetime of a state root, so we don't have to pivot quite as often.
The call tracer and prestate tracer store data JSON-encoded in memory. In order to support alternative encodings (specifically RLP), it's better to keep data a native format during tracing. This PR does marshalling at the end, using gencodec.
OBS!
This PR changes the call tracer result slightly:
- Order of type and value fields are changed (should not matter).
- Output fields are completely omitted when they're empty (no more output: "0x"). Previously, this was only _sometimes_ omitted (e.g. when call ended in a non-revert error) and otherwise 0x when the output was actually empty.
* eth/tracers: pad memory slice on oob case
* eth/tracers/js: fix testfailure due to err msg capitalization
Co-authored-by: Martin Holst Swende <martin@swende.se>
Sometimes we get stuck on db compaction, and the CL re-issues the "same" command to us multiple times. Each request get stuck on the same place, in the middle of the handler.
This changes makes it so we do not reprocess the same payload, but instead detects it early.
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
This PR simplifies the logic of chain tracer and also adds the unit tests.
The most important change has been made in this PR is the state management. Whenever a tracing state is acquired there is a corresponding release function be returned as well. It must be called once the state is used up, otherwise resource leaking can happen.
And also the logic of state management has been simplified a lot. Specifically, the state provider(eth backend, les backend) should ensure the state is available and referenced. State customers can use the state according to their own needs, or build other states based on the given state. But once the release function is called, there is no guarantee of the availability of the state.
Co-authored-by: Sina Mahmoodi <1591639+s1na@users.noreply.github.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth/catalyst: warn less frequently if no beacon client is available
* eth/catalyst: tweak warning frequency a bit
* eth/catalyst: some more tweaks
* Update api.go
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/fetcher: introduce some lag in tx fetching
* eth/fetcher: change conditions a bit
* eth/fetcher: use per-batch quota check
* eth/fetcher: fix some comments
* eth/fetcher: address review concerns
* eth/fetcher: fix panic + add warn log
* eth/fetcher: fix log
* eth/fetcher: fix log
* cmd/devp2p/internal/ethtest: fix ignorign tx announcements from prev. tests
* cmd/devp2p/internal/ethtest: fix TestLargeTxRequest
This increases the number of tx relay messages the test waits for. Since
go-ethereum now processes incoming txs in smaller batches, the
announcement messages it sends are also smaller.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a cache for block logs which is shared by all filters. The cache
size of is configurable using the `--cache.blocklogs` flag.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR allows users to pass in a config object directly to the tracers. Previously only the struct logger was configurable.
It also adds an option to the call tracer which if enabled makes it ignore any subcall and collect only information about the top-level call. See #25419 for discussion.
The tracers will silently ignore if they are passed a config they don't care about.
* core: use TryGetAccount to read where TryUpdateAccount has been used to write
* Gary's review feedback
* implement Gary's suggestion
* fix bug + rename NewSecure into NewStateTrie
* trie: add backwards-compatibility aliases for SecureTrie
* Update database.go
* make the linter happy
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* eth: support bubbling up bad blocks from sync to the engine API
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* Update eth/catalyst/api.go
* eth/catalyst: when forgetting bad hashes, also forget descendants
* eth/catalyst: minor bad block tweaks for resilience
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Adds a native tracer that returns that in case of failure returns the error message or the revert reason of a transaction.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth/catalyst: disallow importing blocks via newPayload during snap sync
* eth/catalyst: make tests pass by using full sync only
* eth/catalysts: make the import delay a bit cleaner
* eth/catalyst: fix typo
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This changes the []byte <-> Uint8Array conversion to use an
ArrayBuffer, avoiding inefficient copying of the slice data in Goja.
Co-authored-by: Felix Lange <fjl@twurst.com>
The new protocol version removes support for GetNodeData.
See https://eips.ethereum.org/EIPS/eip-4938 for more information.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
Previously on Geth startup we just logged the chain config is a semi-json-y format. Whilst that worked while we had a handful of hard-forks defined, currently it's kind of unwieldy.
This PR converts that original data dump and converts it into a user friendly - alas multiline - log output.
This PR adds support for block overrides when doing debug_traceCall.
- Previously, debug_traceCall against pending erroneously used a common.Hash{} stateroot when looking up the state, meaning that a totally empty state was used -- so it always failed,
- With this change, we reject executing debug_traceCall against pending.
- And we add ability to override all evm-visible header fields.
#23773 added a JS tracer which uses Goja as its engine. In this PR I remove the previous tracer which used duktape as well as remove the dependencies.
This PR also comes with 2 fixes in the Goja tracer and one small behavioural change:
I had handled errors in the native Go functions by panicing. My oversight was that Goja only handles panics with a Goja.Value as argument. The difference is panic(goja.Value) allows JS to catch the exception whereas Interrupt(error) doesn't.
There was a race in how I handled Stop.
Because of 1. some of the methods that simply return nil on error (like memory.slice) now throw an exception.
This adds a JS tracer runtime environment based on the Goja VM. The new
runtime replaces the duktape runtime, which will be removed soon.
Goja is implemented in Go and is faster for cases where the Go <-> JS
transition overhead dominates overall performance. It is faster because
duktape is written in C, and the transition cost includes the cost of using
cgo. Another reason for using Goja is that go-duktape is not maintained
anymore.
We expect the performace of JS tracing to be at least as good or better with
this change.
* eth/catalyst: build the execution payload async
* miner: added comment, added test case
* eth/catalyst: miner: move async block production to miner
* eth/catalyst, miner: support generate seal block async
* miner: rework GetSealingBlockAsync to use a passed channel
* miner: apply rjl's diff
* eth/catalyst: nitpicks
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* eth/protocols/snap: don't include empty snapshot slot slice
This PR fixes the snapshot storage serving handler. In snap protocol
the response is capped by the response size. Server can cutdown the
response if the accumulated byte size exceeds the local hard limit.
It means we can meet a special scenario that there is no storage slot
included for a requested account, but we attach the proof for this
account by mistake.
So in the prover side, when it meets a empty storage response but with
a valid proof proves there are some more slots left in the trie, then
requestor will reject this response and disconnect with server.
In this PR, if there is no storage slot served for the requested account,
then no proof should be attached as well.
* eth/protocols/snap: loosen restrictions for flaky tests
* eth/catalyst: fix flaky test in catalyst
During mining, when a new head arrives and interrupts the block building, the block being built should not be commited (but discarded). Committing the interrupted block introduces unnecessary delay, and possibly causes miner to mine on the previous head, which could result in higher uncle rate.
* core: recover the state in SetChainHead if the head state is missing
* core: disable test logging
* core: address comment from martin
* core: improve log level in case state is recovered
* core, eth, les, light: rename SetChainHead to SetCanonical
This change removes extraneous/unnecessary checks for equality
when comparing 2 accessList values A and B. Given that we validate that
their lengths of A and B are equal, if so and if every element in A is
in B, reflexively every element in B is already in A. If that weren't
the case and an element g existed in A but not in B, that would mean
that there is an extra element and hence a mathematical contradiction.
Fixes#24658
* eth/downloader: remove stale beacon headers as backfilling progresses
* eth/downloader: remove leftover from a previous design
* eth/downloader: do partial beacon cleanups if chain is large
* eth/downloader: linter != heart
This adds a tools.go file to import all command packages used for
go:generate. Doing so makes it possible to execute go-based code
generators using 'go run', locking in the tool version using go.mod.
Co-authored-by: Felix Lange <fjl@twurst.com>
This commit replaces ioutil.TempDir with t.TempDir in tests. The
directory created by t.TempDir is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using ioutil.TempDir
had to be removed manually by calling os.RemoveAll, which is omitted in
some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but t.TempDir handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* eth/tracers: refactor traceTx to separate out struct logging
review fix
Update eth/tracers/api.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Mv ExecutionResult type to logger package
review fix
impl GetResult for StructLogger
make formatLogs private
confused exit and end..
account for intrinsicGas in structlogger, fix TraceCall test
Add Stop method to logger
Simplify traceTx
Fix test
rm logger from blockchain test
account for refund in structLogger
* use tx hooks in struct logger
* minor
* avoid executionResult in struct logger
* revert blockchain test changes
* core,eth: add empty tx logger hooks
* core,eth: add initial and remaining gas to tx hooks
* store tx gasLimit in js tracer
* use gasLimit to compute intrinsic cost for js tracer
* re-use rules in transitiondb
* rm logs
* rm logs
* Mv some fields from Start to TxStart
* simplify sender lookup in prestate tracer
* mv env to TxStart
* Revert "mv env to TxStart"
This reverts commit 656939634b9aff19f55a1cd167345faf8b1ec310.
* Revert "simplify sender lookup in prestate tracer"
This reverts commit ab65bce48007cab99e68232e7aac2fe008338d50.
* Revert "Mv some fields from Start to TxStart"
This reverts commit aa50d3d9b2559addc80df966111ef5fb5d0c1b6b.
* fix intrinsic gas for prestate tracer
* add comments
* refactor
* fix test case
* simplify consumedGas calc in prestate tracer
* eth/catalyst: only apply block if we actually have the state
* add header to payload queue
* Update cmd/geth/dbcmd.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/beacon: eth/catalyst: updated engine api to new version
* core: implement exchangeTransitionConfig
* core/beacon: prevRandao instead of Random
* eth/catalyst: Fix ExchangeTransitionConfig, add test
* eth/catalyst: stop external miners on TTD reached
* node: implement --authrpc.vhosts flag
* core: allow for config override on non-mainnet networks
* eth/catalyst: fix peters comments
* eth/catalyst: make stop remote sealer more explicit
* eth/catalyst: add log output
* cmd/utils: rename authrpc.host to authrpc.addr
* eth/catalyst: disable the disabling of the miner
* eth: core: remove notion of terminal pow block
* eth: les: more of peters nitpicks
* cmd, eth: Rename whitelist argument to peer.requiredblocks
* eth/ethconfig: document PeerRequiredBlocks better
* cmd/utils: rename new flag to --eth.requiredblocks
Co-authored-by: Felix Lange <fjl@twurst.com>
