This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
* common: remove CurrencyToString
Move denomination values to params instead.
* common: delete dead code
* common: move big integer operations to common/math
This commit consolidates all big integer operations into common/math and
adds tests and documentation.
There should be no change in semantics for BigPow, BigMin, BigMax, S256,
U256, Exp and their behaviour is now locked in by tests.
The BigD, BytesToBig and Bytes2Big functions don't provide additional
value, all uses are replaced by new(big.Int).SetBytes().
BigToBytes is now called PaddedBigBytes, its minimum output size
parameter is now specified as the number of bytes instead of bits. The
single use of this function is in the EVM's MSTORE instruction.
Big and String2Big are replaced by ParseBig, which is slightly stricter.
It previously accepted leading zeros for hexadecimal inputs but treated
decimal inputs as octal if a leading zero digit was present.
ParseUint64 is used in places where String2Big was used to decode a
uint64.
The new functions MustParseBig and MustParseUint64 are now used in many
places where parsing errors were previously ignored.
* common: delete unused big integer variables
* accounts/abi: replace uses of BytesToBig with use of encoding/binary
* common: remove BytesToBig
* common: remove Bytes2Big
* common: remove BigTrue
* cmd/utils: add BigFlag and use it for error-checked integer flags
While here, remove environment variable processing for DirectoryFlag
because we don't use it.
* core: add missing error checks in genesis block parser
* common: remove String2Big
* cmd/evm: use utils.BigFlag
* common/math: check for 256 bit overflow in ParseBig
This is supposed to prevent silent overflow/truncation of values in the
genesis block JSON. Without this check, a genesis block that set a
balance larger than 256 bits would lead to weird behaviour in the VM.
* cmd/utils: fixup import
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
The Subscription type is gone, all uses are replaced by
*TypeMuxSubscription. This change is prep-work for the
introduction of the new Subscription type in a later commit.
gorename -from '"github.com/ethereum/go-ethereum/event"::Event' -to TypeMuxEvent
gorename -from '"github.com/ethereum/go-ethereum/event"::muxsub' -to TypeMuxSubscription
gofmt -w -r 'Subscription -> *TypeMuxSubscription' ./event/*.go
find . -name '*.go' -and -not -regex '\./vendor/.*' \| xargs gofmt -w -r 'event.Subscription -> *event.TypeMuxSubscription'
This significantly reduces the dependency closure of ethclient, which no
longer depends on core/vm as of this change.
All uses of vm.Logs are replaced by []*types.Log. NewLog is gone too,
the constructor simply returned a literal.
The run loop, which previously contained custom opcode executes have been
removed and has been simplified to a few checks.
Each operation consists of 4 elements: execution function, gas cost function,
stack validation function and memory size function. The execution function
implements the operation's runtime behaviour, the gas cost function implements
the operation gas costs function and greatly depends on the memory and stack,
the stack validation function validates the stack and makes sure that enough
items can be popped off and pushed on and the memory size function calculates
the memory required for the operation and returns it.
This commit also allows the EVM to go unmetered. This is helpful for offline
operations such as contract calls.
The transaction pool keeps track of the current nonce in its local pendingState. When a
new block comes in the pendingState is reset. During the reset it fetches multiple times
the current state through the use of the currentState callback. When a second block comes
in during the reset its possible that the state changes during the reset. If that block
holds transactions that are currently in the pool the local pendingState that is used to
determine nonces can get out of sync.
This commit implements EIP158 part 1, 2, 3 & 4
1. If an account is empty it's no longer written to the trie. An empty
account is defined as (balance=0, nonce=0, storage=0, code=0).
2. Delete an empty account if it's touched
3. An empty account is redefined as either non-existent or empty.
4. Zero value calls and zero value suicides no longer consume the 25k
reation costs.
params: moved core/config to params
Signed-off-by: Jeffrey Wilcke <jeffrey@ethereum.org>
This commit replaces the deep-copy based state revert mechanism with a
linear complexity journal. This commit also hides several internal
StateDB methods to limit the number of ways in which calling code can
use the journal incorrectly.
As usual consultation and bug fixes to the initial implementation were
provided by @karalabe, @obscuren and @Arachnid. Thank you!
Shutting down geth prints hundreds of annoying error messages in some
cases. The errors appear because the Stop method of eth.ProtocolManager,
miner.Miner and core.TxPool is asynchronous. Left over peer sessions
generate events which are processed after Stop even though the database
has already been closed.
The fix is to make Stop synchronous using sync.WaitGroup.
For eth.ProtocolManager, in order to make use of WaitGroup safe, we need
a way to stop new peer sessions from being added while waiting on the
WaitGroup. The eth protocol Run function now selects on a signaling
channel and adds to the WaitGroup only if ProtocolManager is not
shutting down.
For miner.worker and core.TxPool the number of goroutines is static,
WaitGroup can be used in the usual way without additional
synchronisation.
- Manager.Accounts no longer returns an error.
- Manager methods take Account instead of common.Address.
- All uses of Account with unkeyed fields are converted.
This PR introduces a 10% probability that you'll run the client with the
JIT enabled testing the new client and helps us potentially catch
errors when reported.
This feature is **disabled** for miners (disabling the JIT completely).
The JIT can however be force for miners if they enable both --jitvm and
--forcejit.
Added chain configuration options and write out during genesis database
insertion. If no "config" was found, nothing is written to the database.
Configurations are written on a per genesis base. This means
that any chain (which is identified by it's genesis hash) can have their
own chain settings.
* Removed some strange code that didn't apply state reverting properly
* Refactored code setting from vm & state transition to the executioner
* Updated tests
Pending logs are now filterable through the Go API. Filter API changed
such that each filter type has it's own bucket and adding filter
explicitly requires you specify the bucket to put it in.
This removes the burden on a single object to take care of all
validation and state processing. Now instead the validation is done by
the `core.BlockValidator` (`types.Validator`) that takes care of both
header and uncle validation through the `ValidateBlock` method and state
validation through the `ValidateState` method. The state processing is
done by a new object `core.StateProcessor` (`types.Processor`) and
accepts a new state as input and uses that to process the given block's
transactions (and uncles for rewords) to calculate the state root for
the next block (P_n + 1).
This PR fixes an issue where the remote worker was stopped twice and not
properly handled. This adds a synchronised running check to the start
and stop methods preventing closing of a channel more than once.
There are a bunch of changes required to make this work:
- in miner: allow unregistering agents, fix RemoteAgent.Stop
- in eth/filters: make FilterSystem.Stop not crash
- in rpc/comms: move listen loop to platform-independent code
Fixes#1930. I ran the shell loop there for a few minutes and didn't see
any changes in the memory profile.
The amount of gas available for tx execution was tracked in the
StateObject representing the coinbase account. This commit makes the gas
counter a separate type in package core, which avoids unintended
consequences of intertwining the counter with state logic.
Log filtering is now using a MIPmap like approach where addresses of
logs are added to a mapped bloom bin. The current levels for the MIP are
in ranges of 1.000.000, 500.000, 100.000, 50.000, 1.000. Logs are
therefor filtered in batches of 1.000.
* Moved `vm.Transfer` to `core` package and changed execution to call
`env.Transfer` instead of `core.Transfer` directly.
* core/vm: byte code VM moved to jump table instead of switch
* Moved `vm.Transfer` to `core` package and changed execution to call
`env.Transfer` instead of `core.Transfer` directly.
* Byte code VM now shares the same code as the JITVM
* Renamed Context to Contract
* Changed initialiser of state transition & unexported methods
* Removed the Execution object and refactor `Call`, `CallCode` &
`Create` in to their own functions instead of being methods.
* Removed the hard dep on the state for the VM. The VM now
depends on a Database interface returned by the environment. In the
process the core now depends less on the statedb by usage of the env
* Moved `Log` from package `core/state` to package `core/vm`.
Work is now handled and carried over multiple sessions. Previously one
session only was assumed, potentially resulting in invalid (outdated)
work
* Larger work / result queue
* Full validation option
* Update => SyncIntermediate
* Added SyncObjects
SyncIntermediate only updates whatever has changed, but, as a side
effect, requires much more disk space.
SyncObjects will only sync whatever is required for a block and will not
save intermediate state to disk. As drawback this requires more time
when more txs come in.
* Miners do now verify their own header, not their state.
* Changed old putTx and putReceipts to be exported
* Moved writing of transactions and receipts out of the block processer
in to the chain manager. Closes#1386
* Miner post ChainHeadEvent & ChainEvent. Closes#1388
This fixes an issue with the lru cache not being available when calling
WriteBlock. WriteBlock previously always assumed to be called from the
InsertChain where the lru cache was always created prior to calling
WriteBlock. When being called from the worker this could lead in to a
nil pointer exception being thrown and causing database corruption.
Removed the managed tx state from the chain manager to the transaction
pool where it's much easier to keep track of nonces (and manage them).
The transaction pool now also uses the queue and pending txs differently
where queued txs are now moved over to the pending queue (i.e. txs ready
for processing and propagation).
* Miner should no longer generate blocks with a time stamp less or equal
than it's parent.
* Future blocks are no longer processed and queued directly.
Closes#1118
if you track stale blocks, then you quickly overflow your ring buffer in the local network case where you're mining every block and generating a lot of stales.
This helps determine which blocks are unlikely to end up as uncles
* Store the 5 most recent locally mined block numbers
* On every imported block, check if the 5-deep block num is in that store
* Also confirm that the block is signed with miner's coinbase
Why not just check the coinbase? This log is useful if you're running
multiple miners and want to know if *this* miner is performing well.
* core: Added GasPriceChange event
* eth: When one of the DB flush methods error a fatal error log message
is given. Hopefully this will prevent corrupted databases from
occuring.
* miner: remove transactions with low gas price. Closes#906, #903
* Changed CalcGasLimit to no longer need current block
* Added a gas * price + value on tx validation
* Transactions in the pool are now re-validated once every X
When worker encounters a gas limit error, subsequent txs should be
ignored from that particular account. This will prevent:
1. Nonce errors been thrown all around
2. The "Known tx" error. Closes#719
3. Repeated contract address. Closes#731
The transaction pool will now some easily be able to pre determine the
validity of a transaction by checking the following:
* Account existst
* gas limit higher than the instrinsic gas
* enough funds to pay upfront costs
* nonce check
Logs are now recorded per transactions instead of tossing them out after
each transaction. This should also fix an issue with
`eth_getFilterLogs` (#629) Also now implemented are the `transactionHash,
blockHash, transactionIndex, logIndex` on logs. Closes#654.
This avoids having to query the coinbase when creating the miner, which
in turn eliminates the dreaded startup error when no accounts are set
up. Later, this will also allow us to simply restart the miner when the
user picks a different coinbase.
This causes a lot of changes in other packages. These are included in
this commit because they're impossible to separate.
