Commit Graph

56 Commits

Author SHA1 Message Date
Guilherme Salgado
c60f6f6214 p2p: don't discard reason set by Disconnect (#16559)
Peer.run was discarding the reason for disconnection sent to the disc
channel by Disconnect.
2018-05-09 01:20:20 +02:00
thomasmodeneis
ba1030b6b8 build: enable goimports and varcheck linters (#16446) 2018-04-18 00:53:50 +02:00
Felix Lange
9123eceb0f p2p, p2p/discover: misc connectivity improvements (#16069)
* p2p: add DialRatio for configuration of inbound vs. dialed connections

* p2p: add connection flags to PeerInfo

* p2p/netutil: add SameNet, DistinctNetSet

* p2p/discover: improve revalidation and seeding

This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.

Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.

Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.

Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.

* p2p/discover: fix nits in UDP transport

We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
2018-02-12 14:36:09 +02:00
Lewis Marshall
54aeb8e4c0 p2p/simulations: various stability fixes (#15198)
p2p/simulations: introduce dialBan

- Refactor simulations/network connection getters to support
  avoiding simultaneous dials between two peers If two peers dial
  simultaneously, the connection will be dropped to help avoid
  that, we essentially lock the connection object with a
  timestamp which serves as a ban on dialing for a period of time
  (dialBanTimeout).

- The connection getter InitConn can be wrapped and passed to the
  nodes via adapters.NodeConfig#Reachable field and then used by
  the respective services when they initiate connections. This
  massively stablise the emerging connectivity when running with
  hundreds of nodes bootstrapping a network.

p2p: add Inbound public method to p2p.Peer

p2p/simulations: Add server id to logs to support debugging
in-memory network simulations when multiple peers are logging.

p2p: SetupConn now returns error. The dialer checks the error and
only calls resolve if the actual TCP dial fails.
2017-12-01 12:49:04 +01:00
Péter Szilágyi
2ee885958b p2p: snappy encoding for devp2p (version bump to 5) (#15106)
* p2p: snappy encoding for devp2p (version bump to 5)

* p2p: remove lazy decompression, enforce 16MB limit
2017-09-26 16:54:49 +03:00
Lewis Marshall
9feec51e2d p2p: add network simulation framework (#14982)
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
2017-09-25 10:08:07 +02:00
Martin Holst Swende
dc92779c0a p2p: change ping ticker to timer (#15071)
Using a Timer over Ticker seems to be a lot better, though I cannot fully
account for why that it behaves so (since Ticker should be more bursty, but not
necessarily more active over time, but that may depend on how long window it
uses to decide on when to tick next)
2017-09-04 09:24:52 +02:00
Felix Lange
96ae35e2ac p2p, p2p/discover, p2p/nat: rework logging using context keys 2017-02-28 10:20:29 +01:00
Péter Szilágyi
d4fd06c3dc
all: blidly swap out glog to our log15, logs need rework 2017-02-23 12:16:44 +02:00
Péter Szilágyi
189dee26c6
p2p: remove trailing newlines from log messages 2017-02-23 12:00:04 +02:00
Felix Lange
7d8155714b p2p: EIP-8 changes 2016-02-19 11:14:48 +01:00
Péter Szilágyi
e46ab3bdcd eth, p2p, rpc/api: polish protocol info gathering 2015-10-28 12:44:15 +02:00
Felix Lange
bfbcfbe4a9 all: fix license headers one more time
I forgot to update one instance of "go-ethereum" in commit 3f047be5a.
2015-07-23 18:35:11 +02:00
Felix Lange
3f047be5aa all: update license headers to distiguish GPL/LGPL
All code outside of cmd/ is licensed as LGPL. The headers
now reflect this by calling the whole work "the go-ethereum library".
2015-07-22 18:51:45 +02:00
Felix Lange
ea54283b30 all: update license information 2015-07-07 14:12:44 +02:00
Péter Szilágyi
d84638bd31 p2p: support protocol version negotiation 2015-06-26 15:48:50 +03:00
Felix Lange
70da79f04c p2p: improve disconnect logging 2015-06-15 15:03:46 +02:00
Felix Lange
8dcbdcad0a p2p: track write errors and prevent writes during shutdown
As of this commit, we no longer rely on the protocol handler to report
write errors in a timely fashion. When a write fails, shutdown is
initiated immediately and no new writes can start. This will also
prevent new writes from starting after Server.Stop has been called.
2015-06-15 15:03:46 +02:00
Felix Lange
1440f9a37a p2p: new dialer, peer management without locks
The most visible change is event-based dialing, which should be an
improvement over the timer-based system that we have at the moment.
The dialer gets a chance to compute new tasks whenever peers change or
dials complete. This is better than checking peers on a timer because
dials happen faster. The dialer can now make more precise decisions
about whom to dial based on the peer set and we can test those
decisions without actually opening any sockets.

Peer management is easier to test because the tests can inject
connections at checkpoints (after enc handshake, after protocol
handshake).

Most of the handshake stuff is now part of the RLPx code. It could be
exported or move to its own package because it is no longer entangled
with Server logic.
2015-05-25 01:17:14 +02:00
Felix Lange
64564da20b p2p: decrease maximum message size for devp2p to 1kB
The previous limit was 10MB which is unacceptable for all kinds
of reasons, the most important one being that we don't want to
allow the remote side to make us allocate 10MB at handshake time.
2015-05-25 01:17:14 +02:00
Felix Lange
dbdc5fd4b3 p2p: delete Server.Broadcast 2015-05-25 01:17:14 +02:00
Felix Lange
691cb90284 p2p: log remote reason when disconnect is requested
The returned reason is currently not used except for the log
message. This change makes the log messages a bit more useful.
The handshake code also returns the remote reason.
2015-05-14 14:53:29 +02:00
Felix Lange
d4f0a67323 p2p: drop connections with no matching protocols 2015-05-08 16:09:55 +02:00
Felix Lange
6a2fec5309 p2p, whisper: use glog for peer-level logging 2015-05-06 23:19:14 +02:00
Felix Lange
b34a8ef624 p2p, p2p/discover: protocol version 4 2015-04-30 14:57:34 +02:00
obscuren
01e3d694a6 p2p: added received at to peer message
p2p.Msg.ReceivedAt can be used for determining block propagation from
begining to end.
2015-04-29 22:49:58 +02:00
Felix Lange
995fab2ebc p2p: fix yet another disconnect hang
Peer.readLoop will only terminate if the connection is closed. Fix the
hang by closing the connection before waiting for readLoop to terminate.

This also removes the british disconnect procedure where we're waiting
for the remote end to close the connection. I have confirmed with
@subtly that cpp-ethereum doesn't adhere to it either.
2015-04-13 17:34:08 +02:00
Felix Lange
99a1db2d40 p2p: don't mess with the socket deadline in Peer.readLoop
netWrapper already sets a read deadline in ReadMsg.
2015-04-10 13:26:28 +02:00
Felix Lange
f1d710af00 p2p: fix Peer shutdown deadlocks
There were multiple synchronization issues in the disconnect handling,
all caused by the odd special-casing of Peer.readLoop errors. Remove the
special handling of read errors and make readLoop part of the Peer
WaitGroup.

Thanks to @Gustav-Simonsson for pointing at arrows in a diagram
and playing rubber-duck.
2015-04-10 13:26:27 +02:00
Felix Lange
a7bced779a p2p: log disconnect requests
This helps a lot with debugging.
2015-03-19 15:15:07 +01:00
Felix Lange
5ba51594c7 p2p: use package rlp to encode messages
Message encoding functions have been renamed to catch any uses.
The switch to the new encoder can cause subtle incompatibilities.
If there are any users outside of our tree, they will at least be
alerted that there was a change.

NewMsg no longer exists. The replacements for EncodeMsg are called
Send and SendItems.
2015-03-19 15:11:02 +01:00
Felix Lange
22659a7fea p2p: restore read/write timeouts
They got lost in the transition to rlpxFrameRW.
2015-03-04 16:42:00 +01:00
Felix Lange
7964f30dcb p2p: msg.Payload contains list data
With RLPx frames, the message code is contained in the
frame and is no longer part of the encoded data.

EncodeMsg, Msg.Decode have been updated to match.
Code that decodes RLP directly from Msg.Payload will need
to change.
2015-03-04 12:27:24 +01:00
Felix Lange
736e632215 p2p: use RLPx frames for messaging 2015-03-04 12:27:23 +01:00
Felix Lange
3dbd32093c p2p: enable devp2p ping
This should prevent connection drops.
2015-02-19 16:54:54 +01:00
Felix Lange
73f94f3755 p2p: disable encryption handshake
The diff is a bit bigger than expected because the protocol handshake
logic has moved out of Peer. This is necessary because the protocol
handshake will have custom framing in the final protocol.
2015-02-19 16:54:53 +01:00
Felix Lange
32a9c0ca80 p2p: bump devp2p protcol version to 3
For compatibility with cpp-ethereum
2015-02-13 15:08:40 +01:00
Felix Lange
fd3e1061e0 p2p: handle disconnect before protocol handshake 2015-02-13 15:06:47 +01:00
Felix Lange
5110f80bba p2p: improve read deadlines
There are now two deadlines, frameReadTimeout and payloadReadTimeout.

The frame timeout is longer and allows for connections that are idle.
The message timeout is still short and ensures that we don't get stuck
in the middle of a message.
2015-02-13 14:44:00 +01:00
Felix Lange
e34d134102 p2p: fixes for actual connections
The unit test hooks were turned on 'in production'.
2015-02-07 00:43:52 +01:00
Felix Lange
5bdc115943 p2p: integrate p2p/discover
Overview of changes:

- ClientIdentity has been removed, use discover.NodeID
- Server now requires a private key to be set (instead of public key)
- Server performs the encryption handshake before launching Peer
- Dial logic takes peers from discover table
- Encryption handshake code has been cleaned up a bit
- baseProtocol is gone because we don't exchange peers anymore
- Some parts of baseProtocol have moved into Peer instead
2015-02-06 00:00:36 +01:00
zelig
68205dec9f make crypto handshake calls package level, store privateKey on peer + tests ok 2015-02-06 00:00:36 +01:00
zelig
4499743522 apply handshake related improvements from p2p.crypto branch 2015-02-06 00:00:35 +01:00
zelig
54252ede31 add temporary forced session token generation 2015-02-06 00:00:35 +01:00
zelig
faa069a126 peer-level integration test for crypto handshake
- add const length params for handshake messages
- add length check to fail early
- add debug logs to help interop testing (!ABSOLUTELY SHOULD BE DELETED LATER)
- wrap connection read/writes in error check
- add cryptoReady channel in peer to signal when secure session setup is finished
- wait for cryptoReady or timeout in TestPeersHandshake
2015-02-06 00:00:35 +01:00
zelig
58fc2c679b important fix for peer pubkey. when taken from identity, chop first format byte! 2015-02-06 00:00:35 +01:00
zelig
e252c634cb first stab at integrating crypto in our p2p
- abstract the entire handshake logic in cryptoId.Run() taking session-relevant parameters
- changes in peer to accomodate how the encryption layer would be switched on
- modify arguments of handshake components
- fixed test getting the wrong pubkey but it till crashes on DH in newSession()
2015-02-06 00:00:35 +01:00
zelig
1803c65e40 integrate cryptoId into peer and connection lifecycle 2015-02-06 00:00:35 +01:00
zelig
c8a8aa0d43 initial hook for crypto handshake (void, off by default) 2015-02-06 00:00:34 +01:00
Felix Lange
b0ff946b55 p2p: move peerList back into baseProtocol
It had been moved to Peer, probably for debugging.
2015-01-06 12:23:38 +01:00