Commit Graph

469 Commits

Author SHA1 Message Date
Felföldi Zsolt
c2003ed63b les, les/flowcontrol: improved request serving and flow control (#18230)
This change

- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
  benchmarks which gives much more consistent results. Until now the
  allowed number of light peers was just a guess which probably contributed
  a lot to the fluctuating quality of available service. Everything related
  to request cost is implemented in a single object, the 'cost tracker'. It
  uses a fixed cost table with a global 'correction factor'. Benchmark code
  is included and can be run at any time to adapt costs to low-level
  implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
  way, with added capabilities: There is now control over bandwidth, which
  allows using the flow control parameters for client prioritization.
  Target utilization over 100 percent is now supported to model concurrent
  request processing. Total serving bandwidth is reduced during block
  processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
  assign priority bandwidth to certain clients and change prioritized
  status even while the client is connected. The new API is meant for
  cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
  control functions through the new API.
2019-02-26 12:32:48 +01:00
Matthew Halpern
fa87929a2f cmd: prefer nil slices over zero-length slices (#19077) 2019-02-15 01:02:11 +02:00
Martin Holst Swende
f48da43bae common/fdlimit: cap on MacOS file limits, fixes #18994 (#19035)
* common/fdlimit: cap on MacOS file limits, fixes #18994

* common/fdlimit: fix Maximum-check to respect OPEN_MAX

* common/fdlimit: return error if OPEN_MAX is exceeded in Raise()

* common/fdlimit: goimports

* common/fdlimit: check value after setting fdlimit

* common/fdlimit: make comment a bit more descriptive

* cmd/utils: make fdlimit happy path a bit cleaner
2019-02-12 12:29:05 +02:00
Péter Szilágyi
d6225ab846
cmd/utils, eth: relinquish GC cache to read cache in archive mode 2019-02-07 14:36:25 +02:00
Martin Holst Swende
43e8efe895
accounts, eth, clique, signer: support for external signer API (#18079)
* accounts, eth, clique: implement external backend + move sighash calc to backend

* signer: implement account_Version on external API

* accounts/external: enable ipc, add copyright

* accounts, internal, signer: formatting

* node: go fmt

* flags: disallow --dev in combo with --externalsigner

* accounts: remove clique-specific signing method, replace with more generic

* accounts, consensus: formatting + fix error in tests

* signer/core: remove (test-) import cycle

* clique: remove unused import

* accounts: remove CliqueHash and avoid dependency on package crypto

* consensus/clique: unduplicate header encoding
2019-02-05 11:23:57 +01:00
Péter Szilágyi
b0ed083ead
cmd, core, params: add support for Goerli 2019-02-04 14:53:12 +02:00
lhendre
d88441025f cmd,eth: 16400 Add an option to stop geth once in sync. WIP for light mode (#17321)
* cmd, eth: Added in the flag to step geth once sync based on input

* cmd, eth: 16400 Add an option to stop geth once in sync.

* cmd: 16400 Add an option to stop geth once in sync. WIP

* cmd/geth/main, les/fletcher: added in light mode support

* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode

* cmd: 16400 Fixed formatting issue and cleaned code

* cmd, eth, les: 16400 Fixed formatting issues

* cmd, eth, les: Performed gofmt to update formatting

* cmd, eth, les: Fixed bugs resulting formatting

* cmd/geth, eth/, les: switched to downloader event

* eth: Fixed styling and gen_config

* eth/: Fix nil error in config file

* cmd/geth: Updated countdown log

* les/fetcher.go: Removed depcreated channel

* eth/downloader.go: Removed deprecated select

* cmd/geth, cmd/utils: Fixed minor issues

* eth: Reverted config files to proper format

* eth: Fixed typo in config file

* cmd/geth, eth/down: Updated code to use header time stamp

* eth/downloader: Changed the time threshold to 10 minutes

* cmd/geth, eth/downloader: Updated downloading event to pass latest header

* cmd/geth: Updated main to use right timer object

* cmd/geth: Removed unused failed event

* cmd/geth: added in correct time field with type assertion

* cmd/geth, cmd/utils: Updated flag to use boolean

* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations

* cmd/geth: Removed unneeded import

* cmd/geth, eth/downloader: fixed event field and suggested changes

* cmd/geth, cmd/utils: Updated flag and linting issue
2019-01-30 08:40:36 +01:00
Anton Evangelatov
21acf0bc8d cmd/utils: allow for multiple influxdb tags (#18520)
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.

This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
2019-01-29 09:14:24 +01:00
Anton Evangelatov
0a454554ae cmd/utils: allow empty bootnodes flag override (#18509) 2019-01-24 13:02:30 +01:00
b00ris
769657060e les: implement ultralight client (#16904)
For more information about this light client mode, read
https://hackmd.io/s/HJy7jjZpm
2019-01-24 12:18:26 +01:00
Kris Shinn
f91312dbdb GraphQL master FF for review (#18445)
* Initial work on a graphql API

* Added receipts, and more transaction fields.

* Finish receipts, add logs

* Add transactionCount to block

* Add types  and .

* Update Block type to be compatible with ethql

* Rename nonce to transactionCount in Account, to be compatible with ethql

* Update transaction, receipt and log to match ethql

* Add  query operator, for a range of blocks

* Added ommerCount to Block

* Add transactionAt and ommerAt to Block

* Added sendRawTransaction mutation

* Add Call and EstimateGas to graphQL API

* Refactored to use hexutil.Bytes instead of HexBytes

* Replace BigNum with hexutil.Big

* Refactor call and estimateGas to use ethapi struct type

* Replace ethgraphql.Address with common.Address

* Replace ethgraphql.Hash with common.Hash

* Converted most quantities to Long instead of Int

* Add support for logs

* Fix bug in runFilter

* Restructured Transaction to work primarily with headers, so uncle data is reported properly

* Add gasPrice API

* Add protocolVersion API

* Add syncing API

* Moved schema into its own source file

* Move some single use args types into anonymous structs

* Add doc-comments

* Fixed backend fetching to use context

* Added (very) basic tests

* Add documentation to the graphql schema

* Fix reversion for formatting of big numbers

* Correct spelling error

* s/BigInt/Long/

* Update common/types.go

* Fixes in response to review

* Fix lint error

* Updated calls on private functions

* Fix typo in graphql.go

* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
2019-01-21 15:38:13 +01:00
Martin Holst Swende
83a9a73b89 cmd/geth, core, eth: implement Constantinople override flag (#18273)
* geth/core/eth: implement constantinople override flag

* les: implemnent constantinople override flag for les clients

* cmd/geth, eth, les: fix typo, move flag to experimentals
2018-12-11 14:19:03 +02:00
Péter Szilágyi
31b3334922
cmd/utils, eth: minor polishes on whitelist code 2018-12-10 14:47:01 +02:00
Ryan Schneider
48b70ecff1
cmd, eth: Add support for --whitelist <blocknum>=<hash>,... flag
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
2018-12-10 14:30:06 +02:00
Péter Szilágyi
cf62bd2e88
cmd/utils: max out the OS file allowance, don't cap to 2K 2018-11-29 12:47:29 +02:00
Ferenc Szabo
76f5f662cc cmd/swarm: FUSE do not require --ipcpath (#18112)
- Have `${DataDir}/bzzd.ipc` as IPC path default.
- Respect the `--datadir` flag.
- Keep only the global `--ipcpath` flag and drop the local `--ipcpath` flag
  as flags might overwrite each other. (Note: before global `--ipcpath`
  was ignored even if it was set)

fixes ethersphere#795
2018-11-23 01:32:34 +01:00
Péter Szilágyi
434dd5bc00
cmd, core, eth, light, trie: add trie read caching layer 2018-11-15 12:22:13 +02:00
Corey Lin
1ff152f3a4 rawdb: remove unused parameter for WritePreimages func (#18059)
* rawdb: remove unused parameter for WritePreimages func and modify a
spelling mistake

* rawdb: update the doc for function WritePreimages
2018-11-09 12:51:07 +02:00
Ryan Schneider
cfcc47529d cmd/utils: fix bug when checking for flag value conflicts (#17803) 2018-10-08 17:08:56 +03:00
Felix Lange
30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
gary rong
d6254f827b all: protect self-mined block during reorg (#17656) 2018-09-20 15:09:30 +03:00
Guillaume Ballet
da29332c5f core/vm: add switches to select evm+ewasm interpreters (#17687)
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
2018-09-20 10:44:35 +03:00
TColl
0e32989a08 cmd/utils: typos in {Miner, MinerLegacy}GasPriceFlag (#17588) 2018-09-10 15:22:34 +03:00
b00ris
8711e2b636 whisper: add light mode check to handshake (#16725) 2018-09-05 10:57:45 +02:00
Péter Szilágyi
e8f229b82e
cmd, core, eth, miner, params: configurable gas floor and ceil 2018-08-29 12:40:12 +03:00
gary rong
c1c003e4ff consensus, miner: stale block mining support (#17506)
* consensus, miner: stale block supporting

* consensus, miner: refactor seal signature

* cmd, consensus, eth: add miner noverify flag

* cmd, consensus, miner: polish
2018-08-28 16:59:05 +03:00
Péter Szilágyi
92381ee009
cmd, eth: clean up miner startup API, drop noop config field 2018-08-23 14:09:45 +03:00
gary rong
af85d8e2b3 cmd, eth: apply default miner recommit setting (#17479) 2018-08-22 09:47:50 +03:00
Péter Szilágyi
e0d0e64ce2
cmd, core, miner: add --txpool.locals and priority mining 2018-08-22 09:43:57 +03:00
gary rong
b2c644ffb5 cmd, eth, miner: make recommit configurable (#17444)
* cmd, eth, miner: make recommit configurable

* cmd, eth, les, miner: polish a bit

* miner: filter duplicate sealing work

* cmd: remove uncessary conversion

* miner: avoid microptimization in favor of cleaner code
2018-08-21 22:56:54 +03:00
Péter Szilágyi
2a17fe2561
cmd: polish miner flags, deprecate olds, add upgrade path 2018-08-15 11:41:23 +03:00
Péter Szilágyi
f0998415ba
cmd, consensus/ethash, eth: miner push notifications 2018-08-10 09:06:59 +03:00
Anton Evangelatov
a5d5609e38 build: rename swarm deb package to ethereum-swarm; change swarm deb version from 1.8.x to 0.3.x (#16988)
* build: add support for different package and binary names

* build: bump up copyright date

* build: change default PackageName to empty string

* build, internal, swarm: enhance build/release process

* build: hack ethereum-swarm as a "depends" in deb package

* build/ci: remove redundant variables

* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;

* internal: remove VERSION() method which reads VERSION file

* build: fix VersionFilePath to Version

* Makefile: remove clean_go_build_cache.sh until it works

* Makefile: revert removal of clean_go_build_cache.sh
2018-07-30 11:56:40 +03:00
a e r t h
021d6fbbbb cmd: prevent accidental invalid commands (#17248)
* cmd: stop parsing bootnodes if one is invalid

* cmd/geth: require valid command as argument (or no arg)
2018-07-26 13:57:20 +03:00
Sarlor
6c412e313c cmd/utils: fix comment typo (#17249)
cmd: Comment error
2018-07-26 10:59:05 +03:00
Kurkó Mihály
a9835c1816 cmd, dashboard, log: log collection and exploration (#17097)
* cmd, dashboard, internal, log, node: logging feature

* cmd, dashboard, internal, log: requested changes

* dashboard, vendor: gofmt, govendor, use vendored file watcher

* dashboard, log: gofmt -s -w, goimports

* dashboard, log: gosimple
2018-07-11 10:59:04 +03:00
Wenbiao Zheng
2eedbe799f cmd: typo fixed, isntance -> instance (#17149) 2018-07-09 17:34:59 +03:00
Anton Evangelatov
1990c9e621 cmd/geth: export metrics to InfluxDB (#16979)
* cmd/geth: add flags for metrics export

* cmd/geth: update usage fields for metrics flags

* metrics/influxdb: update reporter logger to adhere to geth logging convention
2018-07-02 15:51:02 +03:00
Jeremy Schlatter
3fb5f3ae11 cmd/utils: fix NetworkId default when -dev is set (#16833)
Prior to this change, when geth was started with `geth -dev -rpc`,
it would report a network id of `1` in response to the `net_version` RPC
request. But the actual network id it used to verify transactions
was `1337`.

This change causes geth instead respond with `1337` to the `net_version`
RPC when geth is started with `geth -dev -rpc`.
2018-06-14 12:31:31 +03:00
Péter Szilágyi
6cf0ab38bd
core/rawdb: separate raw database access to own package (#16666) 2018-05-07 14:35:06 +03:00
Martin Klepsch
852aa143ac cmd/utils: point users to --syncmode under DEPRECATED (#16572)
Indicate that --light and --fast options are replaced by --syncmode
2018-04-27 12:32:06 +03:00
Zhenguo Niu
661f5f3dac cmd/utils: fix help template issue for subcommands (#16351) 2018-04-18 01:50:25 +02:00
Guillaume Ballet
cf799e5eaa
whisper: switch all remaining components from v5 to v6 2018-03-26 16:36:14 +02:00
Péter Szilágyi
495bdb0c71
cmd: export preimages in RLP, support GZIP, uniform with block export 2018-03-26 14:08:01 +03:00
Guillaume Ballet
3d013c1939 whisper: some components are still using v5, switch to v6 2018-03-22 15:48:52 +01:00
Felföldi Zsolt
1488fdaf19 cmd/utils: fix maxpeers vs lightpeers logic (#16125) 2018-03-09 11:55:03 +02:00
Kurkó Mihály
704840a8ad cmd, dashboard: use webpack dev server, remove custom assets (#16263)
* cmd, dashboard: remove custom assets, webpack dev server

* dashboard: yarn commands, small fixes
2018-03-08 10:22:21 +02:00
Martin Holst Swende
478143d69a utils: fix #16138 by checking if vhosts flag is set (#16141)
* utils: fix #16138 by checking if vhosts flag is set

* utils,node: fix defaults for rpcvhosts

* node,utils: address review concerns
2018-03-05 13:02:32 +02:00
Péter Szilágyi
01507d9b9d
cmd, console: support all termination signals 2018-02-21 15:23:10 +02:00
Martin Holst Swende
589b603a9b rpc: dns rebind protection (#15962)
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks

* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d

* rpc: add wildcard support for rpcallowedhosts + go fmt

* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check

* http, rpc, utils: make vhosts into map, address review concerns

* node: change log messages to use geth standard (not sprintf)

* rpc: fix spelling
2018-02-12 14:52:07 +02:00