les, les/flowcontrol: improved request serving and flow control (#18230)

This change

- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
  benchmarks which gives much more consistent results. Until now the
  allowed number of light peers was just a guess which probably contributed
  a lot to the fluctuating quality of available service. Everything related
  to request cost is implemented in a single object, the 'cost tracker'. It
  uses a fixed cost table with a global 'correction factor'. Benchmark code
  is included and can be run at any time to adapt costs to low-level
  implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
  way, with added capabilities: There is now control over bandwidth, which
  allows using the flow control parameters for client prioritization.
  Target utilization over 100 percent is now supported to model concurrent
  request processing. Total serving bandwidth is reduced during block
  processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
  assign priority bandwidth to certain clients and change prioritized
  status even while the client is connected. The new API is meant for
  cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
  control functions through the new API.
This commit is contained in:
Felföldi Zsolt 2019-02-26 12:32:48 +01:00 committed by Felix Lange
parent c2b33a117f
commit c2003ed63b
39 changed files with 3705 additions and 999 deletions

View File

@ -93,6 +93,8 @@ var (
utils.ExitWhenSyncedFlag,
utils.GCModeFlag,
utils.LightServFlag,
utils.LightBandwidthInFlag,
utils.LightBandwidthOutFlag,
utils.LightPeersFlag,
utils.LightKDFFlag,
utils.WhitelistFlag,

View File

@ -81,6 +81,8 @@ var AppHelpFlagGroups = []flagGroup{
utils.EthStatsURLFlag,
utils.IdentityFlag,
utils.LightServFlag,
utils.LightBandwidthInFlag,
utils.LightBandwidthOutFlag,
utils.LightPeersFlag,
utils.LightKDFFlag,
utils.WhitelistFlag,

View File

@ -199,9 +199,19 @@ var (
}
LightServFlag = cli.IntFlag{
Name: "lightserv",
Usage: "Maximum percentage of time allowed for serving LES requests (0-90)",
Usage: "Maximum percentage of time allowed for serving LES requests (multi-threaded processing allows values over 100)",
Value: 0,
}
LightBandwidthInFlag = cli.IntFlag{
Name: "lightbwin",
Usage: "Incoming bandwidth limit for light server (1000 bytes/sec, 0 = unlimited)",
Value: 1000,
}
LightBandwidthOutFlag = cli.IntFlag{
Name: "lightbwout",
Usage: "Outgoing bandwidth limit for light server (1000 bytes/sec, 0 = unlimited)",
Value: 5000,
}
LightPeersFlag = cli.IntFlag{
Name: "lightpeers",
Usage: "Maximum number of LES client peers",
@ -1305,6 +1315,8 @@ func SetEthConfig(ctx *cli.Context, stack *node.Node, cfg *eth.Config) {
if ctx.GlobalIsSet(LightServFlag.Name) {
cfg.LightServ = ctx.GlobalInt(LightServFlag.Name)
}
cfg.LightBandwidthIn = ctx.GlobalInt(LightBandwidthInFlag.Name)
cfg.LightBandwidthOut = ctx.GlobalInt(LightBandwidthOutFlag.Name)
if ctx.GlobalIsSet(LightPeersFlag.Name) {
cfg.LightPeers = ctx.GlobalInt(LightPeersFlag.Name)
}

View File

@ -111,6 +111,7 @@ type BlockChain struct {
chainSideFeed event.Feed
chainHeadFeed event.Feed
logsFeed event.Feed
blockProcFeed event.Feed
scope event.SubscriptionScope
genesisBlock *types.Block
@ -1090,6 +1091,10 @@ func (bc *BlockChain) InsertChain(chain types.Blocks) (int, error) {
if len(chain) == 0 {
return 0, nil
}
bc.blockProcFeed.Send(true)
defer bc.blockProcFeed.Send(false)
// Remove already known canon-blocks
var (
block, prev *types.Block
@ -1725,3 +1730,9 @@ func (bc *BlockChain) SubscribeChainSideEvent(ch chan<- ChainSideEvent) event.Su
func (bc *BlockChain) SubscribeLogsEvent(ch chan<- []*types.Log) event.Subscription {
return bc.scope.Track(bc.logsFeed.Subscribe(ch))
}
// SubscribeBlockProcessingEvent registers a subscription of bool where true means
// block processing has started while false means it has stopped.
func (bc *BlockChain) SubscribeBlockProcessingEvent(ch chan<- bool) event.Subscription {
return bc.scope.Track(bc.blockProcFeed.Subscribe(ch))
}

View File

@ -54,6 +54,7 @@ import (
type LesServer interface {
Start(srvr *p2p.Server)
Stop()
APIs() []rpc.API
Protocols() []p2p.Protocol
SetBloomBitsIndexer(bbIndexer *core.ChainIndexer)
}
@ -267,6 +268,10 @@ func CreateConsensusEngine(ctx *node.ServiceContext, chainConfig *params.ChainCo
func (s *Ethereum) APIs() []rpc.API {
apis := ethapi.GetAPIs(s.APIBackend)
// Append any APIs exposed explicitly by the les server
if s.lesServer != nil {
apis = append(apis, s.lesServer.APIs()...)
}
// Append any APIs exposed explicitly by the consensus engine
apis = append(apis, s.engine.APIs(s.BlockChain())...)

View File

@ -99,6 +99,8 @@ type Config struct {
// Light client options
LightServ int `toml:",omitempty"` // Maximum percentage of time allowed for serving LES requests
LightBandwidthIn int `toml:",omitempty"` // Incoming bandwidth limit for light servers
LightBandwidthOut int `toml:",omitempty"` // Outgoing bandwidth limit for light servers
LightPeers int `toml:",omitempty"` // Maximum number of LES client peers
OnlyAnnounce bool // Maximum number of LES client peers

View File

@ -24,6 +24,8 @@ func (c Config) MarshalTOML() (interface{}, error) {
SyncMode downloader.SyncMode
NoPruning bool
LightServ int `toml:",omitempty"`
LightBandwidthIn int `toml:",omitempty"`
LightBandwidthOut int `toml:",omitempty"`
LightPeers int `toml:",omitempty"`
OnlyAnnounce bool
ULC *ULCConfig `toml:",omitempty"`
@ -55,6 +57,8 @@ func (c Config) MarshalTOML() (interface{}, error) {
enc.SyncMode = c.SyncMode
enc.NoPruning = c.NoPruning
enc.LightServ = c.LightServ
enc.LightBandwidthIn = c.LightBandwidthIn
enc.LightBandwidthOut = c.LightBandwidthOut
enc.LightPeers = c.LightPeers
enc.OnlyAnnounce = c.OnlyAnnounce
enc.ULC = c.ULC
@ -91,6 +95,8 @@ func (c *Config) UnmarshalTOML(unmarshal func(interface{}) error) error {
SyncMode *downloader.SyncMode
NoPruning *bool
LightServ *int `toml:",omitempty"`
LightBandwidthIn *int `toml:",omitempty"`
LightBandwidthOut *int `toml:",omitempty"`
LightPeers *int `toml:",omitempty"`
OnlyAnnounce *bool
ULC *ULCConfig `toml:",omitempty"`
@ -135,6 +141,12 @@ func (c *Config) UnmarshalTOML(unmarshal func(interface{}) error) error {
if dec.LightServ != nil {
c.LightServ = *dec.LightServ
}
if dec.LightBandwidthIn != nil {
c.LightBandwidthIn = *dec.LightBandwidthIn
}
if dec.LightBandwidthOut != nil {
c.LightBandwidthOut = *dec.LightBandwidthOut
}
if dec.LightPeers != nil {
c.LightPeers = *dec.LightPeers
}

454
les/api.go Normal file
View File

@ -0,0 +1,454 @@
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package les
import (
"context"
"errors"
"sync"
"time"
"github.com/ethereum/go-ethereum/common/hexutil"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/rpc"
)
var (
ErrMinCap = errors.New("capacity too small")
ErrTotalCap = errors.New("total capacity exceeded")
ErrUnknownBenchmarkType = errors.New("unknown benchmark type")
dropCapacityDelay = time.Second // delay applied to decreasing capacity changes
)
// PrivateLightServerAPI provides an API to access the LES light server.
// It offers only methods that operate on public data that is freely available to anyone.
type PrivateLightServerAPI struct {
server *LesServer
}
// NewPrivateLightServerAPI creates a new LES light server API.
func NewPrivateLightServerAPI(server *LesServer) *PrivateLightServerAPI {
return &PrivateLightServerAPI{
server: server,
}
}
// TotalCapacity queries total available capacity for all clients
func (api *PrivateLightServerAPI) TotalCapacity() hexutil.Uint64 {
return hexutil.Uint64(api.server.priorityClientPool.totalCapacity())
}
// SubscribeTotalCapacity subscribes to changed total capacity events.
// If onlyUnderrun is true then notification is sent only if the total capacity
// drops under the total capacity of connected priority clients.
//
// Note: actually applying decreasing total capacity values is delayed while the
// notification is sent instantly. This allows lowering the capacity of a priority client
// or choosing which one to drop before the system drops some of them automatically.
func (api *PrivateLightServerAPI) SubscribeTotalCapacity(ctx context.Context, onlyUnderrun bool) (*rpc.Subscription, error) {
notifier, supported := rpc.NotifierFromContext(ctx)
if !supported {
return &rpc.Subscription{}, rpc.ErrNotificationsUnsupported
}
rpcSub := notifier.CreateSubscription()
api.server.priorityClientPool.subscribeTotalCapacity(&tcSubscription{notifier, rpcSub, onlyUnderrun})
return rpcSub, nil
}
type (
// tcSubscription represents a total capacity subscription
tcSubscription struct {
notifier *rpc.Notifier
rpcSub *rpc.Subscription
onlyUnderrun bool
}
tcSubs map[*tcSubscription]struct{}
)
// send sends a changed total capacity event to the subscribers
func (s tcSubs) send(tc uint64, underrun bool) {
for sub := range s {
select {
case <-sub.rpcSub.Err():
delete(s, sub)
case <-sub.notifier.Closed():
delete(s, sub)
default:
if underrun || !sub.onlyUnderrun {
sub.notifier.Notify(sub.rpcSub.ID, tc)
}
}
}
}
// MinimumCapacity queries minimum assignable capacity for a single client
func (api *PrivateLightServerAPI) MinimumCapacity() hexutil.Uint64 {
return hexutil.Uint64(minCapacity)
}
// FreeClientCapacity queries the capacity provided for free clients
func (api *PrivateLightServerAPI) FreeClientCapacity() hexutil.Uint64 {
return hexutil.Uint64(api.server.freeClientCap)
}
// SetClientCapacity sets the priority capacity assigned to a given client.
// If the assigned capacity is bigger than zero then connection is always
// guaranteed. The sum of capacity assigned to priority clients can not exceed
// the total available capacity.
//
// Note: assigned capacity can be changed while the client is connected with
// immediate effect.
func (api *PrivateLightServerAPI) SetClientCapacity(id enode.ID, cap uint64) error {
if cap != 0 && cap < minCapacity {
return ErrMinCap
}
return api.server.priorityClientPool.setClientCapacity(id, cap)
}
// GetClientCapacity returns the capacity assigned to a given client
func (api *PrivateLightServerAPI) GetClientCapacity(id enode.ID) hexutil.Uint64 {
api.server.priorityClientPool.lock.Lock()
defer api.server.priorityClientPool.lock.Unlock()
return hexutil.Uint64(api.server.priorityClientPool.clients[id].cap)
}
// clientPool is implemented by both the free and priority client pools
type clientPool interface {
peerSetNotify
setLimits(count int, totalCap uint64)
}
// priorityClientPool stores information about prioritized clients
type priorityClientPool struct {
lock sync.Mutex
child clientPool
ps *peerSet
clients map[enode.ID]priorityClientInfo
totalCap, totalCapAnnounced uint64
totalConnectedCap, freeClientCap uint64
maxPeers, priorityCount int
subs tcSubs
updateSchedule []scheduledUpdate
scheduleCounter uint64
}
// scheduledUpdate represents a delayed total capacity update
type scheduledUpdate struct {
time mclock.AbsTime
totalCap, id uint64
}
// priorityClientInfo entries exist for all prioritized clients and currently connected non-priority clients
type priorityClientInfo struct {
cap uint64 // zero for non-priority clients
connected bool
peer *peer
}
// newPriorityClientPool creates a new priority client pool
func newPriorityClientPool(freeClientCap uint64, ps *peerSet, child clientPool) *priorityClientPool {
return &priorityClientPool{
clients: make(map[enode.ID]priorityClientInfo),
freeClientCap: freeClientCap,
ps: ps,
child: child,
}
}
// registerPeer is called when a new client is connected. If the client has no
// priority assigned then it is passed to the child pool which may either keep it
// or disconnect it.
//
// Note: priorityClientPool also stores a record about free clients while they are
// connected in order to be able to assign priority to them later.
func (v *priorityClientPool) registerPeer(p *peer) {
v.lock.Lock()
defer v.lock.Unlock()
id := p.ID()
c := v.clients[id]
if c.connected {
return
}
if c.cap == 0 && v.child != nil {
v.child.registerPeer(p)
}
if c.cap != 0 && v.totalConnectedCap+c.cap > v.totalCap {
go v.ps.Unregister(p.id)
return
}
c.connected = true
c.peer = p
v.clients[id] = c
if c.cap != 0 {
v.priorityCount++
v.totalConnectedCap += c.cap
if v.child != nil {
v.child.setLimits(v.maxPeers-v.priorityCount, v.totalCap-v.totalConnectedCap)
}
p.updateCapacity(c.cap)
}
}
// unregisterPeer is called when a client is disconnected. If the client has no
// priority assigned then it is also removed from the child pool.
func (v *priorityClientPool) unregisterPeer(p *peer) {
v.lock.Lock()
defer v.lock.Unlock()
id := p.ID()
c := v.clients[id]
if !c.connected {
return
}
if c.cap != 0 {
c.connected = false
v.clients[id] = c
v.priorityCount--
v.totalConnectedCap -= c.cap
if v.child != nil {
v.child.setLimits(v.maxPeers-v.priorityCount, v.totalCap-v.totalConnectedCap)
}
} else {
if v.child != nil {
v.child.unregisterPeer(p)
}
delete(v.clients, id)
}
}
// setLimits updates the allowed peer count and total capacity of the priority
// client pool. Since the free client pool is a child of the priority pool the
// remaining peer count and capacity is assigned to the free pool by calling its
// own setLimits function.
//
// Note: a decreasing change of the total capacity is applied with a delay.
func (v *priorityClientPool) setLimits(count int, totalCap uint64) {
v.lock.Lock()
defer v.lock.Unlock()
v.totalCapAnnounced = totalCap
if totalCap > v.totalCap {
v.setLimitsNow(count, totalCap)
v.subs.send(totalCap, false)
return
}
v.setLimitsNow(count, v.totalCap)
if totalCap < v.totalCap {
v.subs.send(totalCap, totalCap < v.totalConnectedCap)
for i, s := range v.updateSchedule {
if totalCap >= s.totalCap {
s.totalCap = totalCap
v.updateSchedule = v.updateSchedule[:i+1]
return
}
}
v.updateSchedule = append(v.updateSchedule, scheduledUpdate{time: mclock.Now() + mclock.AbsTime(dropCapacityDelay), totalCap: totalCap})
if len(v.updateSchedule) == 1 {
v.scheduleCounter++
id := v.scheduleCounter
v.updateSchedule[0].id = id
time.AfterFunc(dropCapacityDelay, func() { v.checkUpdate(id) })
}
} else {
v.updateSchedule = nil
}
}
// checkUpdate performs the next scheduled update if possible and schedules
// the one after that
func (v *priorityClientPool) checkUpdate(id uint64) {
v.lock.Lock()
defer v.lock.Unlock()
if len(v.updateSchedule) == 0 || v.updateSchedule[0].id != id {
return
}
v.setLimitsNow(v.maxPeers, v.updateSchedule[0].totalCap)
v.updateSchedule = v.updateSchedule[1:]
if len(v.updateSchedule) != 0 {
v.scheduleCounter++
id := v.scheduleCounter
v.updateSchedule[0].id = id
dt := time.Duration(v.updateSchedule[0].time - mclock.Now())
time.AfterFunc(dt, func() { v.checkUpdate(id) })
}
}
// setLimits updates the allowed peer count and total capacity immediately
func (v *priorityClientPool) setLimitsNow(count int, totalCap uint64) {
if v.priorityCount > count || v.totalConnectedCap > totalCap {
for id, c := range v.clients {
if c.connected {
c.connected = false
v.totalConnectedCap -= c.cap
v.priorityCount--
v.clients[id] = c
go v.ps.Unregister(c.peer.id)
if v.priorityCount <= count && v.totalConnectedCap <= totalCap {
break
}
}
}
}
v.maxPeers = count
v.totalCap = totalCap
if v.child != nil {
v.child.setLimits(v.maxPeers-v.priorityCount, v.totalCap-v.totalConnectedCap)
}
}
// totalCapacity queries total available capacity for all clients
func (v *priorityClientPool) totalCapacity() uint64 {
v.lock.Lock()
defer v.lock.Unlock()
return v.totalCapAnnounced
}
// subscribeTotalCapacity subscribes to changed total capacity events
func (v *priorityClientPool) subscribeTotalCapacity(sub *tcSubscription) {
v.lock.Lock()
defer v.lock.Unlock()
v.subs[sub] = struct{}{}
}
// setClientCapacity sets the priority capacity assigned to a given client
func (v *priorityClientPool) setClientCapacity(id enode.ID, cap uint64) error {
v.lock.Lock()
defer v.lock.Unlock()
c := v.clients[id]
if c.cap == cap {
return nil
}
if c.connected {
if v.totalConnectedCap+cap > v.totalCap+c.cap {
return ErrTotalCap
}
if c.cap == 0 {
if v.child != nil {
v.child.unregisterPeer(c.peer)
}
v.priorityCount++
}
if cap == 0 {
v.priorityCount--
}
v.totalConnectedCap += cap - c.cap
if v.child != nil {
v.child.setLimits(v.maxPeers-v.priorityCount, v.totalCap-v.totalConnectedCap)
}
if cap == 0 {
if v.child != nil {
v.child.registerPeer(c.peer)
}
c.peer.updateCapacity(v.freeClientCap)
} else {
c.peer.updateCapacity(cap)
}
}
if cap != 0 || c.connected {
c.cap = cap
v.clients[id] = c
} else {
delete(v.clients, id)
}
return nil
}
// Benchmark runs a request performance benchmark with a given set of measurement setups
// in multiple passes specified by passCount. The measurement time for each setup in each
// pass is specified in milliseconds by length.
//
// Note: measurement time is adjusted for each pass depending on the previous ones.
// Therefore a controlled total measurement time is achievable in multiple passes.
func (api *PrivateLightServerAPI) Benchmark(setups []map[string]interface{}, passCount, length int) ([]map[string]interface{}, error) {
benchmarks := make([]requestBenchmark, len(setups))
for i, setup := range setups {
if t, ok := setup["type"].(string); ok {
getInt := func(field string, def int) int {
if value, ok := setup[field].(float64); ok {
return int(value)
}
return def
}
getBool := func(field string, def bool) bool {
if value, ok := setup[field].(bool); ok {
return value
}
return def
}
switch t {
case "header":
benchmarks[i] = &benchmarkBlockHeaders{
amount: getInt("amount", 1),
skip: getInt("skip", 1),
byHash: getBool("byHash", false),
reverse: getBool("reverse", false),
}
case "body":
benchmarks[i] = &benchmarkBodiesOrReceipts{receipts: false}
case "receipts":
benchmarks[i] = &benchmarkBodiesOrReceipts{receipts: true}
case "proof":
benchmarks[i] = &benchmarkProofsOrCode{code: false}
case "code":
benchmarks[i] = &benchmarkProofsOrCode{code: true}
case "cht":
benchmarks[i] = &benchmarkHelperTrie{
bloom: false,
reqCount: getInt("amount", 1),
}
case "bloom":
benchmarks[i] = &benchmarkHelperTrie{
bloom: true,
reqCount: getInt("amount", 1),
}
case "txSend":
benchmarks[i] = &benchmarkTxSend{}
case "txStatus":
benchmarks[i] = &benchmarkTxStatus{}
default:
return nil, ErrUnknownBenchmarkType
}
} else {
return nil, ErrUnknownBenchmarkType
}
}
rs := api.server.protocolManager.runBenchmark(benchmarks, passCount, time.Millisecond*time.Duration(length))
result := make([]map[string]interface{}, len(setups))
for i, r := range rs {
res := make(map[string]interface{})
if r.err == nil {
res["totalCount"] = r.totalCount
res["avgTime"] = r.avgTime
res["maxInSize"] = r.maxInSize
res["maxOutSize"] = r.maxOutSize
} else {
res["error"] = r.err.Error()
}
result[i] = res
}
return result, nil
}

525
les/api_test.go Normal file
View File

@ -0,0 +1,525 @@
// Copyright 2016 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package les
import (
"context"
"errors"
"flag"
"fmt"
"io/ioutil"
"math/rand"
"os"
"sync"
"sync/atomic"
"testing"
"time"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/hexutil"
"github.com/ethereum/go-ethereum/consensus/ethash"
"github.com/ethereum/go-ethereum/eth"
"github.com/ethereum/go-ethereum/eth/downloader"
"github.com/ethereum/go-ethereum/les/flowcontrol"
"github.com/ethereum/go-ethereum/log"
"github.com/ethereum/go-ethereum/node"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/simulations"
"github.com/ethereum/go-ethereum/p2p/simulations/adapters"
"github.com/ethereum/go-ethereum/rpc"
colorable "github.com/mattn/go-colorable"
)
/*
This test is not meant to be a part of the automatic testing process because it
runs for a long time and also requires a large database in order to do a meaningful
request performance test. When testServerDataDir is empty, the test is skipped.
*/
const (
testServerDataDir = "" // should always be empty on the master branch
testServerCapacity = 200
testMaxClients = 10
testTolerance = 0.1
minRelCap = 0.2
)
func TestCapacityAPI3(t *testing.T) {
testCapacityAPI(t, 3)
}
func TestCapacityAPI6(t *testing.T) {
testCapacityAPI(t, 6)
}
func TestCapacityAPI10(t *testing.T) {
testCapacityAPI(t, 10)
}
// testCapacityAPI runs an end-to-end simulation test connecting one server with
// a given number of clients. It sets different priority capacities to all clients
// except a randomly selected one which runs in free client mode. All clients send
// similar requests at the maximum allowed rate and the test verifies whether the
// ratio of processed requests is close enough to the ratio of assigned capacities.
// Running multiple rounds with different settings ensures that changing capacity
// while connected and going back and forth between free and priority mode with
// the supplied API calls is also thoroughly tested.
func testCapacityAPI(t *testing.T, clientCount int) {
if testServerDataDir == "" {
// Skip test if no data dir specified
return
}
for !testSim(t, 1, clientCount, []string{testServerDataDir}, nil, func(ctx context.Context, net *simulations.Network, servers []*simulations.Node, clients []*simulations.Node) bool {
if len(servers) != 1 {
t.Fatalf("Invalid number of servers: %d", len(servers))
}
server := servers[0]
clientRpcClients := make([]*rpc.Client, len(clients))
serverRpcClient, err := server.Client()
if err != nil {
t.Fatalf("Failed to obtain rpc client: %v", err)
}
headNum, headHash := getHead(ctx, t, serverRpcClient)
totalCap := getTotalCap(ctx, t, serverRpcClient)
minCap := getMinCap(ctx, t, serverRpcClient)
testCap := totalCap * 3 / 4
fmt.Printf("Server testCap: %d minCap: %d head number: %d head hash: %064x\n", testCap, minCap, headNum, headHash)
reqMinCap := uint64(float64(testCap) * minRelCap / (minRelCap + float64(len(clients)-1)))
if minCap > reqMinCap {
t.Fatalf("Minimum client capacity (%d) bigger than required minimum for this test (%d)", minCap, reqMinCap)
}
freeIdx := rand.Intn(len(clients))
freeCap := getFreeCap(ctx, t, serverRpcClient)
for i, client := range clients {
var err error
clientRpcClients[i], err = client.Client()
if err != nil {
t.Fatalf("Failed to obtain rpc client: %v", err)
}
fmt.Println("connecting client", i)
if i != freeIdx {
setCapacity(ctx, t, serverRpcClient, client.ID(), testCap/uint64(len(clients)))
}
net.Connect(client.ID(), server.ID())
for {
select {
case <-ctx.Done():
t.Fatalf("Timeout")
default:
}
num, hash := getHead(ctx, t, clientRpcClients[i])
if num == headNum && hash == headHash {
fmt.Println("client", i, "synced")
break
}
time.Sleep(time.Millisecond * 200)
}
}
var wg sync.WaitGroup
stop := make(chan struct{})
reqCount := make([]uint64, len(clientRpcClients))
for i, c := range clientRpcClients {
wg.Add(1)
i, c := i, c
go func() {
queue := make(chan struct{}, 100)
var count uint64
for {
select {
case queue <- struct{}{}:
select {
case <-stop:
wg.Done()
return
case <-ctx.Done():
wg.Done()
return
default:
wg.Add(1)
go func() {
ok := testRequest(ctx, t, c)
wg.Done()
<-queue
if ok {
count++
atomic.StoreUint64(&reqCount[i], count)
}
}()
}
case <-stop:
wg.Done()
return
case <-ctx.Done():
wg.Done()
return
}
}
}()
}
processedSince := func(start []uint64) []uint64 {
res := make([]uint64, len(reqCount))
for i := range reqCount {
res[i] = atomic.LoadUint64(&reqCount[i])
if start != nil {
res[i] -= start[i]
}
}
return res
}
weights := make([]float64, len(clients))
for c := 0; c < 5; c++ {
setCapacity(ctx, t, serverRpcClient, clients[freeIdx].ID(), freeCap)
freeIdx = rand.Intn(len(clients))
var sum float64
for i := range clients {
if i == freeIdx {
weights[i] = 0
} else {
weights[i] = rand.Float64()*(1-minRelCap) + minRelCap
}
sum += weights[i]
}
for i, client := range clients {
weights[i] *= float64(testCap-freeCap-100) / sum
capacity := uint64(weights[i])
if i != freeIdx && capacity < getCapacity(ctx, t, serverRpcClient, client.ID()) {
setCapacity(ctx, t, serverRpcClient, client.ID(), capacity)
}
}
setCapacity(ctx, t, serverRpcClient, clients[freeIdx].ID(), 0)
for i, client := range clients {
capacity := uint64(weights[i])
if i != freeIdx && capacity > getCapacity(ctx, t, serverRpcClient, client.ID()) {
setCapacity(ctx, t, serverRpcClient, client.ID(), capacity)
}
}
weights[freeIdx] = float64(freeCap)
for i := range clients {
weights[i] /= float64(testCap)
}
time.Sleep(flowcontrol.DecParamDelay)
fmt.Println("Starting measurement")
fmt.Printf("Relative weights:")
for i := range clients {
fmt.Printf(" %f", weights[i])
}
fmt.Println()
start := processedSince(nil)
for {
select {
case <-ctx.Done():
t.Fatalf("Timeout")
default:
}
totalCap = getTotalCap(ctx, t, serverRpcClient)
if totalCap < testCap {
fmt.Println("Total capacity underrun")
close(stop)
wg.Wait()
return false
}
processed := processedSince(start)
var avg uint64
fmt.Printf("Processed")
for i, p := range processed {
fmt.Printf(" %d", p)
processed[i] = uint64(float64(p) / weights[i])
avg += processed[i]
}
avg /= uint64(len(processed))
if avg >= 10000 {
var maxDev float64
for _, p := range processed {
dev := float64(int64(p-avg)) / float64(avg)
fmt.Printf(" %7.4f", dev)
if dev < 0 {
dev = -dev
}
if dev > maxDev {
maxDev = dev
}
}
fmt.Printf(" max deviation: %f totalCap: %d\n", maxDev, totalCap)
if maxDev <= testTolerance {
fmt.Println("success")
break
}
} else {
fmt.Println()
}
time.Sleep(time.Millisecond * 200)
}
}
close(stop)
wg.Wait()
for i, count := range reqCount {
fmt.Println("client", i, "processed", count)
}
return true
}) {
fmt.Println("restarting test")
}
}
func getHead(ctx context.Context, t *testing.T, client *rpc.Client) (uint64, common.Hash) {
res := make(map[string]interface{})
if err := client.CallContext(ctx, &res, "eth_getBlockByNumber", "latest", false); err != nil {
t.Fatalf("Failed to obtain head block: %v", err)
}
numStr, ok := res["number"].(string)
if !ok {
t.Fatalf("RPC block number field invalid")
}
num, err := hexutil.DecodeUint64(numStr)
if err != nil {
t.Fatalf("Failed to decode RPC block number: %v", err)
}
hashStr, ok := res["hash"].(string)
if !ok {
t.Fatalf("RPC block number field invalid")
}
hash := common.HexToHash(hashStr)
return num, hash
}
func testRequest(ctx context.Context, t *testing.T, client *rpc.Client) bool {
//res := make(map[string]interface{})
var res string
var addr common.Address
rand.Read(addr[:])
c, _ := context.WithTimeout(ctx, time.Second*12)
// if err := client.CallContext(ctx, &res, "eth_getProof", addr, nil, "latest"); err != nil {
err := client.CallContext(c, &res, "eth_getBalance", addr, "latest")
if err != nil {
fmt.Println("request error:", err)
}
return err == nil
}
func setCapacity(ctx context.Context, t *testing.T, server *rpc.Client, clientID enode.ID, cap uint64) {
if err := server.CallContext(ctx, nil, "les_setClientCapacity", clientID, cap); err != nil {
t.Fatalf("Failed to set client capacity: %v", err)
}
}
func getCapacity(ctx context.Context, t *testing.T, server *rpc.Client, clientID enode.ID) uint64 {
var s string
if err := server.CallContext(ctx, &s, "les_getClientCapacity", clientID); err != nil {
t.Fatalf("Failed to get client capacity: %v", err)
}
cap, err := hexutil.DecodeUint64(s)
if err != nil {
t.Fatalf("Failed to decode client capacity: %v", err)
}
return cap
}
func getTotalCap(ctx context.Context, t *testing.T, server *rpc.Client) uint64 {
var s string
if err := server.CallContext(ctx, &s, "les_totalCapacity"); err != nil {
t.Fatalf("Failed to query total capacity: %v", err)
}
total, err := hexutil.DecodeUint64(s)
if err != nil {
t.Fatalf("Failed to decode total capacity: %v", err)
}
return total
}
func getMinCap(ctx context.Context, t *testing.T, server *rpc.Client) uint64 {
var s string
if err := server.CallContext(ctx, &s, "les_minimumCapacity"); err != nil {
t.Fatalf("Failed to query minimum capacity: %v", err)
}
min, err := hexutil.DecodeUint64(s)
if err != nil {
t.Fatalf("Failed to decode minimum capacity: %v", err)
}
return min
}
func getFreeCap(ctx context.Context, t *testing.T, server *rpc.Client) uint64 {
var s string
if err := server.CallContext(ctx, &s, "les_freeClientCapacity"); err != nil {
t.Fatalf("Failed to query free client capacity: %v", err)
}
free, err := hexutil.DecodeUint64(s)
if err != nil {
t.Fatalf("Failed to decode free client capacity: %v", err)
}
return free
}
func init() {
flag.Parse()
// register the Delivery service which will run as a devp2p
// protocol when using the exec adapter
adapters.RegisterServices(services)
log.PrintOrigins(true)
log.Root().SetHandler(log.LvlFilterHandler(log.Lvl(*loglevel), log.StreamHandler(colorable.NewColorableStderr(), log.TerminalFormat(true))))
}
var (
adapter = flag.String("adapter", "exec", "type of simulation: sim|socket|exec|docker")
loglevel = flag.Int("loglevel", 0, "verbosity of logs")
nodes = flag.Int("nodes", 0, "number of nodes")
)
var services = adapters.Services{
"lesclient": newLesClientService,
"lesserver": newLesServerService,
}
func NewNetwork() (*simulations.Network, func(), error) {
adapter, adapterTeardown, err := NewAdapter(*adapter, services)
if err != nil {
return nil, adapterTeardown, err
}
defaultService := "streamer"
net := simulations.NewNetwork(adapter, &simulations.NetworkConfig{
ID: "0",
DefaultService: defaultService,
})
teardown := func() {
adapterTeardown()
net.Shutdown()
}
return net, teardown, nil
}
func NewAdapter(adapterType string, services adapters.Services) (adapter adapters.NodeAdapter, teardown func(), err error) {
teardown = func() {}
switch adapterType {
case "sim":
adapter = adapters.NewSimAdapter(services)
// case "socket":
// adapter = adapters.NewSocketAdapter(services)
case "exec":
baseDir, err0 := ioutil.TempDir("", "les-test")
if err0 != nil {
return nil, teardown, err0
}
teardown = func() { os.RemoveAll(baseDir) }
adapter = adapters.NewExecAdapter(baseDir)
/*case "docker":
adapter, err = adapters.NewDockerAdapter()
if err != nil {
return nil, teardown, err
}*/
default:
return nil, teardown, errors.New("adapter needs to be one of sim, socket, exec, docker")
}
return adapter, teardown, nil
}
func testSim(t *testing.T, serverCount, clientCount int, serverDir, clientDir []string, test func(ctx context.Context, net *simulations.Network, servers []*simulations.Node, clients []*simulations.Node) bool) bool {
net, teardown, err := NewNetwork()
defer teardown()
if err != nil {
t.Fatalf("Failed to create network: %v", err)
}
timeout := 1800 * time.Second
ctx, cancel := context.WithTimeout(context.Background(), timeout)
defer cancel()
servers := make([]*simulations.Node, serverCount)
clients := make([]*simulations.Node, clientCount)
for i := range clients {
clientconf := adapters.RandomNodeConfig()
clientconf.Services = []string{"lesclient"}
if len(clientDir) == clientCount {
clientconf.DataDir = clientDir[i]
}
client, err := net.NewNodeWithConfig(clientconf)
if err != nil {
t.Fatalf("Failed to create client: %v", err)
}
clients[i] = client
}
for i := range servers {
serverconf := adapters.RandomNodeConfig()
serverconf.Services = []string{"lesserver"}
if len(serverDir) == serverCount {
serverconf.DataDir = serverDir[i]
}
server, err := net.NewNodeWithConfig(serverconf)
if err != nil {
t.Fatalf("Failed to create server: %v", err)
}
servers[i] = server
}
for _, client := range clients {
if err := net.Start(client.ID()); err != nil {
t.Fatalf("Failed to start client node: %v", err)
}
}
for _, server := range servers {
if err := net.Start(server.ID()); err != nil {
t.Fatalf("Failed to start server node: %v", err)
}
}
return test(ctx, net, servers, clients)
}
func newLesClientService(ctx *adapters.ServiceContext) (node.Service, error) {
config := eth.DefaultConfig
config.SyncMode = downloader.LightSync
config.Ethash.PowMode = ethash.ModeFake
return New(ctx.NodeContext, &config)
}
func newLesServerService(ctx *adapters.ServiceContext) (node.Service, error) {
config := eth.DefaultConfig
config.SyncMode = downloader.FullSync
config.LightServ = testServerCapacity
config.LightPeers = testMaxClients
ethereum, err := eth.New(ctx.NodeContext, &config)
if err != nil {
return nil, err
}
server, err := NewLesServer(ethereum, &config)
if err != nil {
return nil, err
}
ethereum.AddLesServer(server)
return ethereum, nil
}

View File

@ -25,6 +25,7 @@ import (
"github.com/ethereum/go-ethereum/accounts"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/hexutil"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/consensus"
"github.com/ethereum/go-ethereum/core"
"github.com/ethereum/go-ethereum/core/bloombits"
@ -100,7 +101,7 @@ func New(ctx *node.ServiceContext, config *eth.Config) (*LightEthereum, error) {
chainConfig: chainConfig,
eventMux: ctx.EventMux,
peers: peers,
reqDist: newRequestDistributor(peers, quitSync),
reqDist: newRequestDistributor(peers, quitSync, &mclock.System{}),
accountManager: ctx.AccountManager,
engine: eth.CreateConsensusEngine(ctx, chainConfig, &config.Ethash, nil, false, chainDb),
shutdownChan: make(chan bool),

353
les/benchmark.go Normal file
View File

@ -0,0 +1,353 @@
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package les
import (
"encoding/binary"
"fmt"
"math/big"
"math/rand"
"time"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/core/rawdb"
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/les/flowcontrol"
"github.com/ethereum/go-ethereum/log"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/params"
"github.com/ethereum/go-ethereum/rlp"
)
// requestBenchmark is an interface for different randomized request generators
type requestBenchmark interface {
// init initializes the generator for generating the given number of randomized requests
init(pm *ProtocolManager, count int) error
// request initiates sending a single request to the given peer
request(peer *peer, index int) error
}
// benchmarkBlockHeaders implements requestBenchmark
type benchmarkBlockHeaders struct {
amount, skip int
reverse, byHash bool
offset, randMax int64
hashes []common.Hash
}
func (b *benchmarkBlockHeaders) init(pm *ProtocolManager, count int) error {
d := int64(b.amount-1) * int64(b.skip+1)
b.offset = 0
b.randMax = pm.blockchain.CurrentHeader().Number.Int64() + 1 - d
if b.randMax < 0 {
return fmt.Errorf("chain is too short")
}
if b.reverse {
b.offset = d
}
if b.byHash {
b.hashes = make([]common.Hash, count)
for i := range b.hashes {
b.hashes[i] = rawdb.ReadCanonicalHash(pm.chainDb, uint64(b.offset+rand.Int63n(b.randMax)))
}
}
return nil
}
func (b *benchmarkBlockHeaders) request(peer *peer, index int) error {
if b.byHash {
return peer.RequestHeadersByHash(0, 0, b.hashes[index], b.amount, b.skip, b.reverse)
} else {
return peer.RequestHeadersByNumber(0, 0, uint64(b.offset+rand.Int63n(b.randMax)), b.amount, b.skip, b.reverse)
}
}
// benchmarkBodiesOrReceipts implements requestBenchmark
type benchmarkBodiesOrReceipts struct {
receipts bool
hashes []common.Hash
}
func (b *benchmarkBodiesOrReceipts) init(pm *ProtocolManager, count int) error {
randMax := pm.blockchain.CurrentHeader().Number.Int64() + 1
b.hashes = make([]common.Hash, count)
for i := range b.hashes {
b.hashes[i] = rawdb.ReadCanonicalHash(pm.chainDb, uint64(rand.Int63n(randMax)))
}
return nil
}
func (b *benchmarkBodiesOrReceipts) request(peer *peer, index int) error {
if b.receipts {
return peer.RequestReceipts(0, 0, []common.Hash{b.hashes[index]})
} else {
return peer.RequestBodies(0, 0, []common.Hash{b.hashes[index]})
}
}
// benchmarkProofsOrCode implements requestBenchmark
type benchmarkProofsOrCode struct {
code bool
headHash common.Hash
}
func (b *benchmarkProofsOrCode) init(pm *ProtocolManager, count int) error {
b.headHash = pm.blockchain.CurrentHeader().Hash()
return nil
}
func (b *benchmarkProofsOrCode) request(peer *peer, index int) error {
key := make([]byte, 32)
rand.Read(key)
if b.code {
return peer.RequestCode(0, 0, []CodeReq{{BHash: b.headHash, AccKey: key}})
} else {
return peer.RequestProofs(0, 0, []ProofReq{{BHash: b.headHash, Key: key}})
}
}
// benchmarkHelperTrie implements requestBenchmark
type benchmarkHelperTrie struct {
bloom bool
reqCount int
sectionCount, headNum uint64
}
func (b *benchmarkHelperTrie) init(pm *ProtocolManager, count int) error {
if b.bloom {
b.sectionCount, b.headNum, _ = pm.server.bloomTrieIndexer.Sections()
} else {
b.sectionCount, _, _ = pm.server.chtIndexer.Sections()
b.sectionCount /= (params.CHTFrequencyClient / params.CHTFrequencyServer)
b.headNum = b.sectionCount*params.CHTFrequencyClient - 1
}
if b.sectionCount == 0 {
return fmt.Errorf("no processed sections available")
}
return nil
}
func (b *benchmarkHelperTrie) request(peer *peer, index int) error {
reqs := make([]HelperTrieReq, b.reqCount)
if b.bloom {
bitIdx := uint16(rand.Intn(2048))
for i := range reqs {
key := make([]byte, 10)
binary.BigEndian.PutUint16(key[:2], bitIdx)
binary.BigEndian.PutUint64(key[2:], uint64(rand.Int63n(int64(b.sectionCount))))
reqs[i] = HelperTrieReq{Type: htBloomBits, TrieIdx: b.sectionCount - 1, Key: key}
}
} else {
for i := range reqs {
key := make([]byte, 8)
binary.BigEndian.PutUint64(key[:], uint64(rand.Int63n(int64(b.headNum))))
reqs[i] = HelperTrieReq{Type: htCanonical, TrieIdx: b.sectionCount - 1, Key: key, AuxReq: auxHeader}
}
}
return peer.RequestHelperTrieProofs(0, 0, reqs)
}
// benchmarkTxSend implements requestBenchmark
type benchmarkTxSend struct {
txs types.Transactions
}
func (b *benchmarkTxSend) init(pm *ProtocolManager, count int) error {
key, _ := crypto.GenerateKey()
addr := crypto.PubkeyToAddress(key.PublicKey)
signer := types.NewEIP155Signer(big.NewInt(18))
b.txs = make(types.Transactions, count)
for i := range b.txs {
data := make([]byte, txSizeCostLimit)
rand.Read(data)
tx, err := types.SignTx(types.NewTransaction(0, addr, new(big.Int), 0, new(big.Int), data), signer, key)
if err != nil {
panic(err)
}
b.txs[i] = tx
}
return nil
}
func (b *benchmarkTxSend) request(peer *peer, index int) error {
enc, _ := rlp.EncodeToBytes(types.Transactions{b.txs[index]})
return peer.SendTxs(0, 0, enc)
}
// benchmarkTxStatus implements requestBenchmark
type benchmarkTxStatus struct{}
func (b *benchmarkTxStatus) init(pm *ProtocolManager, count int) error {
return nil
}
func (b *benchmarkTxStatus) request(peer *peer, index int) error {
var hash common.Hash
rand.Read(hash[:])
return peer.RequestTxStatus(0, 0, []common.Hash{hash})
}
// benchmarkSetup stores measurement data for a single benchmark type
type benchmarkSetup struct {
req requestBenchmark
totalCount int
totalTime, avgTime time.Duration
maxInSize, maxOutSize uint32
err error
}
// runBenchmark runs a benchmark cycle for all benchmark types in the specified
// number of passes
func (pm *ProtocolManager) runBenchmark(benchmarks []requestBenchmark, passCount int, targetTime time.Duration) []*benchmarkSetup {
setup := make([]*benchmarkSetup, len(benchmarks))
for i, b := range benchmarks {
setup[i] = &benchmarkSetup{req: b}
}
for i := 0; i < passCount; i++ {
log.Info("Running benchmark", "pass", i+1, "total", passCount)
todo := make([]*benchmarkSetup, len(benchmarks))
copy(todo, setup)
for len(todo) > 0 {
// select a random element
index := rand.Intn(len(todo))
next := todo[index]
todo[index] = todo[len(todo)-1]
todo = todo[:len(todo)-1]
if next.err == nil {
// calculate request count
count := 50
if next.totalTime > 0 {
count = int(uint64(next.totalCount) * uint64(targetTime) / uint64(next.totalTime))
}
if err := pm.measure(next, count); err != nil {
next.err = err
}
}
}
}
log.Info("Benchmark completed")
for _, s := range setup {
if s.err == nil {
s.avgTime = s.totalTime / time.Duration(s.totalCount)
}
}
return setup
}
// meteredPipe implements p2p.MsgReadWriter and remembers the largest single
// message size sent through the pipe
type meteredPipe struct {
rw p2p.MsgReadWriter
maxSize uint32
}
func (m *meteredPipe) ReadMsg() (p2p.Msg, error) {
return m.rw.ReadMsg()
}
func (m *meteredPipe) WriteMsg(msg p2p.Msg) error {
if msg.Size > m.maxSize {
m.maxSize = msg.Size
}
return m.rw.WriteMsg(msg)
}
// measure runs a benchmark for a single type in a single pass, with the given
// number of requests
func (pm *ProtocolManager) measure(setup *benchmarkSetup, count int) error {
clientPipe, serverPipe := p2p.MsgPipe()
clientMeteredPipe := &meteredPipe{rw: clientPipe}
serverMeteredPipe := &meteredPipe{rw: serverPipe}
var id enode.ID
rand.Read(id[:])
clientPeer := pm.newPeer(lpv2, NetworkId, p2p.NewPeer(id, "client", nil), clientMeteredPipe)
serverPeer := pm.newPeer(lpv2, NetworkId, p2p.NewPeer(id, "server", nil), serverMeteredPipe)
serverPeer.sendQueue = newExecQueue(count)
serverPeer.announceType = announceTypeNone
serverPeer.fcCosts = make(requestCostTable)
c := &requestCosts{}
for code := range requests {
serverPeer.fcCosts[code] = c
}
serverPeer.fcParams = flowcontrol.ServerParams{BufLimit: 1, MinRecharge: 1}
serverPeer.fcClient = flowcontrol.NewClientNode(pm.server.fcManager, serverPeer.fcParams)
defer serverPeer.fcClient.Disconnect()
if err := setup.req.init(pm, count); err != nil {
return err
}
errCh := make(chan error, 10)
start := mclock.Now()
go func() {
for i := 0; i < count; i++ {
if err := setup.req.request(clientPeer, i); err != nil {
errCh <- err
return
}
}
}()
go func() {
for i := 0; i < count; i++ {
if err := pm.handleMsg(serverPeer); err != nil {
errCh <- err
return
}
}
}()
go func() {
for i := 0; i < count; i++ {
msg, err := clientPipe.ReadMsg()
if err != nil {
errCh <- err
return
}
var i interface{}
msg.Decode(&i)
}
// at this point we can be sure that the other two
// goroutines finished successfully too
close(errCh)
}()
select {
case err := <-errCh:
if err != nil {
return err
}
case <-pm.quitSync:
clientPipe.Close()
serverPipe.Close()
return fmt.Errorf("Benchmark cancelled")
}
setup.totalTime += time.Duration(mclock.Now() - start)
setup.totalCount += count
setup.maxInSize = clientMeteredPipe.maxSize
setup.maxOutSize = serverMeteredPipe.maxSize
clientPipe.Close()
serverPipe.Close()
return nil
}

388
les/costtracker.go Normal file
View File

@ -0,0 +1,388 @@
// Copyright 2016 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more detailct.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package les
import (
"encoding/binary"
"math"
"sync"
"sync/atomic"
"time"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/eth"
"github.com/ethereum/go-ethereum/ethdb"
"github.com/ethereum/go-ethereum/les/flowcontrol"
"github.com/ethereum/go-ethereum/log"
)
const makeCostStats = false // make request cost statistics during operation
var (
// average request cost estimates based on serving time
reqAvgTimeCost = requestCostTable{
GetBlockHeadersMsg: {150000, 30000},
GetBlockBodiesMsg: {0, 700000},
GetReceiptsMsg: {0, 1000000},
GetCodeMsg: {0, 450000},
GetProofsV1Msg: {0, 600000},
GetProofsV2Msg: {0, 600000},
GetHeaderProofsMsg: {0, 1000000},
GetHelperTrieProofsMsg: {0, 1000000},
SendTxMsg: {0, 450000},
SendTxV2Msg: {0, 450000},
GetTxStatusMsg: {0, 250000},
}
// maximum incoming message size estimates
reqMaxInSize = requestCostTable{
GetBlockHeadersMsg: {40, 0},
GetBlockBodiesMsg: {0, 40},
GetReceiptsMsg: {0, 40},
GetCodeMsg: {0, 80},
GetProofsV1Msg: {0, 80},
GetProofsV2Msg: {0, 80},
GetHeaderProofsMsg: {0, 20},
GetHelperTrieProofsMsg: {0, 20},
SendTxMsg: {0, 66000},
SendTxV2Msg: {0, 66000},
GetTxStatusMsg: {0, 50},
}
// maximum outgoing message size estimates
reqMaxOutSize = requestCostTable{
GetBlockHeadersMsg: {0, 556},
GetBlockBodiesMsg: {0, 100000},
GetReceiptsMsg: {0, 200000},
GetCodeMsg: {0, 50000},
GetProofsV1Msg: {0, 4000},
GetProofsV2Msg: {0, 4000},
GetHeaderProofsMsg: {0, 4000},
GetHelperTrieProofsMsg: {0, 4000},
SendTxMsg: {0, 0},
SendTxV2Msg: {0, 100},
GetTxStatusMsg: {0, 100},
}
minBufLimit = uint64(50000000 * maxCostFactor) // minimum buffer limit allowed for a client
minCapacity = (minBufLimit-1)/bufLimitRatio + 1 // minimum capacity allowed for a client
)
const (
maxCostFactor = 2 // ratio of maximum and average cost estimates
gfInitWeight = time.Second * 10
gfMaxWeight = time.Hour
gfUsageThreshold = 0.5
gfUsageTC = time.Second
gfDbKey = "_globalCostFactor"
)
// costTracker is responsible for calculating costs and cost estimates on the
// server side. It continuously updates the global cost factor which is defined
// as the number of cost units per nanosecond of serving time in a single thread.
// It is based on statistics collected during serving requests in high-load periods
// and practically acts as a one-dimension request price scaling factor over the
// pre-defined cost estimate table. Instead of scaling the cost values, the real
// value of cost units is changed by applying the factor to the serving times. This
// is more convenient because the changes in the cost factor can be applied immediately
// without always notifying the clients about the changed cost tables.
type costTracker struct {
db ethdb.Database
stopCh chan chan struct{}
inSizeFactor, outSizeFactor float64
gf, utilTarget float64
gfUpdateCh chan gfUpdate
gfLock sync.RWMutex
totalRechargeCh chan uint64
stats map[uint64][]uint64
}
// newCostTracker creates a cost tracker and loads the cost factor statistics from the database
func newCostTracker(db ethdb.Database, config *eth.Config) *costTracker {
utilTarget := float64(config.LightServ) * flowcontrol.FixedPointMultiplier / 100
ct := &costTracker{
db: db,
stopCh: make(chan chan struct{}),
utilTarget: utilTarget,
}
if config.LightBandwidthIn > 0 {
ct.inSizeFactor = utilTarget / float64(config.LightBandwidthIn)
}
if config.LightBandwidthOut > 0 {
ct.outSizeFactor = utilTarget / float64(config.LightBandwidthOut)
}
if makeCostStats {
ct.stats = make(map[uint64][]uint64)
for code := range reqAvgTimeCost {
ct.stats[code] = make([]uint64, 10)
}
}
ct.gfLoop()
return ct
}
// stop stops the cost tracker and saves the cost factor statistics to the database
func (ct *costTracker) stop() {
stopCh := make(chan struct{})
ct.stopCh <- stopCh
<-stopCh
if makeCostStats {
ct.printStats()
}
}
// makeCostList returns upper cost estimates based on the hardcoded cost estimate
// tables and the optionally specified incoming/outgoing bandwidth limits
func (ct *costTracker) makeCostList() RequestCostList {
maxCost := func(avgTime, inSize, outSize uint64) uint64 {
globalFactor := ct.globalFactor()
cost := avgTime * maxCostFactor
inSizeCost := uint64(float64(inSize) * ct.inSizeFactor * globalFactor * maxCostFactor)
if inSizeCost > cost {
cost = inSizeCost
}
outSizeCost := uint64(float64(outSize) * ct.outSizeFactor * globalFactor * maxCostFactor)
if outSizeCost > cost {
cost = outSizeCost
}
return cost
}
var list RequestCostList
for code, data := range reqAvgTimeCost {
list = append(list, requestCostListItem{
MsgCode: code,
BaseCost: maxCost(data.baseCost, reqMaxInSize[code].baseCost, reqMaxOutSize[code].baseCost),
ReqCost: maxCost(data.reqCost, reqMaxInSize[code].reqCost, reqMaxOutSize[code].reqCost),
})
}
return list
}
type gfUpdate struct {
avgTime, servingTime float64
}
// gfLoop starts an event loop which updates the global cost factor which is
// calculated as a weighted average of the average estimate / serving time ratio.
// The applied weight equals the serving time if gfUsage is over a threshold,
// zero otherwise. gfUsage is the recent average serving time per time unit in
// an exponential moving window. This ensures that statistics are collected only
// under high-load circumstances where the measured serving times are relevant.
// The total recharge parameter of the flow control system which controls the
// total allowed serving time per second but nominated in cost units, should
// also be scaled with the cost factor and is also updated by this loop.
func (ct *costTracker) gfLoop() {
var gfUsage, gfSum, gfWeight float64
lastUpdate := mclock.Now()
expUpdate := lastUpdate
data, _ := ct.db.Get([]byte(gfDbKey))
if len(data) == 16 {
gfSum = math.Float64frombits(binary.BigEndian.Uint64(data[0:8]))
gfWeight = math.Float64frombits(binary.BigEndian.Uint64(data[8:16]))
}
if gfWeight < float64(gfInitWeight) {
gfSum = float64(gfInitWeight)
gfWeight = float64(gfInitWeight)
}
gf := gfSum / gfWeight
ct.gf = gf
ct.gfUpdateCh = make(chan gfUpdate, 100)
go func() {
for {
select {
case r := <-ct.gfUpdateCh:
now := mclock.Now()
max := r.servingTime * gf
if r.avgTime > max {
max = r.avgTime
}
dt := float64(now - expUpdate)
expUpdate = now
gfUsage = gfUsage*math.Exp(-dt/float64(gfUsageTC)) + max*1000000/float64(gfUsageTC)
if gfUsage >= gfUsageThreshold*ct.utilTarget*gf {
gfSum += r.avgTime
gfWeight += r.servingTime
if time.Duration(now-lastUpdate) > time.Second {
gf = gfSum / gfWeight
if gfWeight >= float64(gfMaxWeight) {
gfSum = gf * float64(gfMaxWeight)
gfWeight = float64(gfMaxWeight)
}
lastUpdate = now
ct.gfLock.Lock()
ct.gf = gf
ch := ct.totalRechargeCh
ct.gfLock.Unlock()
if ch != nil {
select {
case ct.totalRechargeCh <- uint64(ct.utilTarget * gf):
default:
}
}
log.Debug("global cost factor updated", "gf", gf, "weight", time.Duration(gfWeight))
}
}
case stopCh := <-ct.stopCh:
var data [16]byte
binary.BigEndian.PutUint64(data[0:8], math.Float64bits(gfSum))
binary.BigEndian.PutUint64(data[8:16], math.Float64bits(gfWeight))
ct.db.Put([]byte(gfDbKey), data[:])
log.Debug("global cost factor saved", "sum", time.Duration(gfSum), "weight", time.Duration(gfWeight))
close(stopCh)
return
}
}
}()
}
// globalFactor returns the current value of the global cost factor
func (ct *costTracker) globalFactor() float64 {
ct.gfLock.RLock()
defer ct.gfLock.RUnlock()
return ct.gf
}
// totalRecharge returns the current total recharge parameter which is used by
// flowcontrol.ClientManager and is scaled by the global cost factor
func (ct *costTracker) totalRecharge() uint64 {
ct.gfLock.RLock()
defer ct.gfLock.RUnlock()
return uint64(ct.gf * ct.utilTarget)
}
// subscribeTotalRecharge returns all future updates to the total recharge value
// through a channel and also returns the current value
func (ct *costTracker) subscribeTotalRecharge(ch chan uint64) uint64 {
ct.gfLock.Lock()
defer ct.gfLock.Unlock()
ct.totalRechargeCh = ch
return uint64(ct.gf * ct.utilTarget)
}
// updateStats updates the global cost factor and (if enabled) the real cost vs.
// average estimate statistics
func (ct *costTracker) updateStats(code, amount, servingTime, realCost uint64) {
avg := reqAvgTimeCost[code]
avgTime := avg.baseCost + amount*avg.reqCost
select {
case ct.gfUpdateCh <- gfUpdate{float64(avgTime), float64(servingTime)}:
default:
}
if makeCostStats {
realCost <<= 4
l := 0
for l < 9 && realCost > avgTime {
l++
realCost >>= 1
}
atomic.AddUint64(&ct.stats[code][l], 1)
}
}
// realCost calculates the final cost of a request based on actual serving time,
// incoming and outgoing message size
//
// Note: message size is only taken into account if bandwidth limitation is applied
// and the cost based on either message size is greater than the cost based on
// serving time. A maximum of the three costs is applied instead of their sum
// because the three limited resources (serving thread time and i/o bandwidth) can
// also be maxed out simultaneously.
func (ct *costTracker) realCost(servingTime uint64, inSize, outSize uint32) uint64 {
cost := float64(servingTime)
inSizeCost := float64(inSize) * ct.inSizeFactor
if inSizeCost > cost {
cost = inSizeCost
}
outSizeCost := float64(outSize) * ct.outSizeFactor
if outSizeCost > cost {
cost = outSizeCost
}
return uint64(cost * ct.globalFactor())
}
// printStats prints the distribution of real request cost relative to the average estimates
func (ct *costTracker) printStats() {
if ct.stats == nil {
return
}
for code, arr := range ct.stats {
log.Info("Request cost statistics", "code", code, "1/16", arr[0], "1/8", arr[1], "1/4", arr[2], "1/2", arr[3], "1", arr[4], "2", arr[5], "4", arr[6], "8", arr[7], "16", arr[8], ">16", arr[9])
}
}
type (
// requestCostTable assigns a cost estimate function to each request type
// which is a linear function of the requested amount
// (cost = baseCost + reqCost * amount)
requestCostTable map[uint64]*requestCosts
requestCosts struct {
baseCost, reqCost uint64
}
// RequestCostList is a list representation of request costs which is used for
// database storage and communication through the network
RequestCostList []requestCostListItem
requestCostListItem struct {
MsgCode, BaseCost, ReqCost uint64
}
)
// getCost calculates the estimated cost for a given request type and amount
func (table requestCostTable) getCost(code, amount uint64) uint64 {
costs := table[code]
return costs.baseCost + amount*costs.reqCost
}
// decode converts a cost list to a cost table
func (list RequestCostList) decode() requestCostTable {
table := make(requestCostTable)
for _, e := range list {
table[e.MsgCode] = &requestCosts{
baseCost: e.BaseCost,
reqCost: e.ReqCost,
}
}
return table
}
// testCostList returns a dummy request cost list used by tests
func testCostList() RequestCostList {
cl := make(RequestCostList, len(reqAvgTimeCost))
var max uint64
for code := range reqAvgTimeCost {
if code > max {
max = code
}
}
i := 0
for code := uint64(0); code <= max; code++ {
if _, ok := reqAvgTimeCost[code]; ok {
cl[i].MsgCode = code
cl[i].BaseCost = 0
cl[i].ReqCost = 0
i++
}
}
return cl
}

View File

@ -14,20 +14,21 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package light implements on-demand retrieval capable state and chain objects
// for the Ethereum Light Client.
package les
import (
"container/list"
"sync"
"time"
"github.com/ethereum/go-ethereum/common/mclock"
)
// requestDistributor implements a mechanism that distributes requests to
// suitable peers, obeying flow control rules and prioritizing them in creation
// order (even when a resend is necessary).
type requestDistributor struct {
clock mclock.Clock
reqQueue *list.List
lastReqOrder uint64
peers map[distPeer]struct{}
@ -67,8 +68,9 @@ type distReq struct {
}
// newRequestDistributor creates a new request distributor
func newRequestDistributor(peers *peerSet, stopChn chan struct{}) *requestDistributor {
func newRequestDistributor(peers *peerSet, stopChn chan struct{}, clock mclock.Clock) *requestDistributor {
d := &requestDistributor{
clock: clock,
reqQueue: list.New(),
loopChn: make(chan struct{}, 2),
stopChn: stopChn,
@ -148,7 +150,7 @@ func (d *requestDistributor) loop() {
wait = distMaxWait
}
go func() {
time.Sleep(wait)
d.clock.Sleep(wait)
d.loopChn <- struct{}{}
}()
break loop

View File

@ -14,8 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package light implements on-demand retrieval capable state and chain objects
// for the Ethereum Light Client.
package les
import (
@ -23,6 +21,8 @@ import (
"sync"
"testing"
"time"
"github.com/ethereum/go-ethereum/common/mclock"
)
type testDistReq struct {
@ -121,7 +121,7 @@ func testRequestDistributor(t *testing.T, resend bool) {
stop := make(chan struct{})
defer close(stop)
dist := newRequestDistributor(nil, stop)
dist := newRequestDistributor(nil, stop, &mclock.System{})
var peers [testDistPeerCount]*testDistPeer
for i := range peers {
peers[i] = &testDistPeer{}

View File

@ -14,7 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (
@ -559,7 +558,7 @@ func (f *lightFetcher) newFetcherDistReq(bestHash common.Hash, reqID uint64, bes
f.lock.Unlock()
cost := p.GetRequestCost(GetBlockHeadersMsg, int(bestAmount))
p.fcServer.QueueRequest(reqID, cost)
p.fcServer.QueuedRequest(reqID, cost)
f.reqMu.Lock()
f.requested[reqID] = fetchRequest{hash: bestHash, amount: bestAmount, peer: p, sent: mclock.Now()}
f.reqMu.Unlock()

View File

@ -18,166 +18,339 @@
package flowcontrol
import (
"fmt"
"sync"
"time"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/log"
)
const fcTimeConst = time.Millisecond
const (
// fcTimeConst is the time constant applied for MinRecharge during linear
// buffer recharge period
fcTimeConst = time.Millisecond
// DecParamDelay is applied at server side when decreasing capacity in order to
// avoid a buffer underrun error due to requests sent by the client before
// receiving the capacity update announcement
DecParamDelay = time.Second * 2
// keepLogs is the duration of keeping logs; logging is not used if zero
keepLogs = 0
)
// ServerParams are the flow control parameters specified by a server for a client
//
// Note: a server can assign different amounts of capacity to each client by giving
// different parameters to them.
type ServerParams struct {
BufLimit, MinRecharge uint64
}
type ClientNode struct {
params *ServerParams
bufValue uint64
lastTime mclock.AbsTime
lock sync.Mutex
cm *ClientManager
cmNode *cmNode
// scheduledUpdate represents a delayed flow control parameter update
type scheduledUpdate struct {
time mclock.AbsTime
params ServerParams
}
func NewClientNode(cm *ClientManager, params *ServerParams) *ClientNode {
// ClientNode is the flow control system's representation of a client
// (used in server mode only)
type ClientNode struct {
params ServerParams
bufValue uint64
lastTime mclock.AbsTime
updateSchedule []scheduledUpdate
sumCost uint64 // sum of req costs received from this client
accepted map[uint64]uint64 // value = sumCost after accepting the given req
lock sync.Mutex
cm *ClientManager
log *logger
cmNodeFields
}
// NewClientNode returns a new ClientNode
func NewClientNode(cm *ClientManager, params ServerParams) *ClientNode {
node := &ClientNode{
cm: cm,
params: params,
bufValue: params.BufLimit,
lastTime: mclock.Now(),
lastTime: cm.clock.Now(),
accepted: make(map[uint64]uint64),
}
node.cmNode = cm.addNode(node)
if keepLogs > 0 {
node.log = newLogger(keepLogs)
}
cm.connect(node)
return node
}
func (peer *ClientNode) Remove(cm *ClientManager) {
cm.removeNode(peer.cmNode)
// Disconnect should be called when a client is disconnected
func (node *ClientNode) Disconnect() {
node.cm.disconnect(node)
}
func (peer *ClientNode) recalcBV(time mclock.AbsTime) {
dt := uint64(time - peer.lastTime)
if time < peer.lastTime {
// update recalculates the buffer value at a specified time while also performing
// scheduled flow control parameter updates if necessary
func (node *ClientNode) update(now mclock.AbsTime) {
for len(node.updateSchedule) > 0 && node.updateSchedule[0].time <= now {
node.recalcBV(node.updateSchedule[0].time)
node.updateParams(node.updateSchedule[0].params, now)
node.updateSchedule = node.updateSchedule[1:]
}
node.recalcBV(now)
}
// recalcBV recalculates the buffer value at a specified time
func (node *ClientNode) recalcBV(now mclock.AbsTime) {
dt := uint64(now - node.lastTime)
if now < node.lastTime {
dt = 0
}
peer.bufValue += peer.params.MinRecharge * dt / uint64(fcTimeConst)
if peer.bufValue > peer.params.BufLimit {
peer.bufValue = peer.params.BufLimit
node.bufValue += node.params.MinRecharge * dt / uint64(fcTimeConst)
if node.bufValue > node.params.BufLimit {
node.bufValue = node.params.BufLimit
}
peer.lastTime = time
if node.log != nil {
node.log.add(now, fmt.Sprintf("updated bv=%d MRR=%d BufLimit=%d", node.bufValue, node.params.MinRecharge, node.params.BufLimit))
}
node.lastTime = now
}
func (peer *ClientNode) AcceptRequest() (uint64, bool) {
peer.lock.Lock()
defer peer.lock.Unlock()
// UpdateParams updates the flow control parameters of a client node
func (node *ClientNode) UpdateParams(params ServerParams) {
node.lock.Lock()
defer node.lock.Unlock()
time := mclock.Now()
peer.recalcBV(time)
return peer.bufValue, peer.cm.accept(peer.cmNode, time)
}
func (peer *ClientNode) RequestProcessed(cost uint64) (bv, realCost uint64) {
peer.lock.Lock()
defer peer.lock.Unlock()
time := mclock.Now()
peer.recalcBV(time)
peer.bufValue -= cost
rcValue, rcost := peer.cm.processed(peer.cmNode, time)
if rcValue < peer.params.BufLimit {
bv := peer.params.BufLimit - rcValue
if bv > peer.bufValue {
peer.bufValue = bv
now := node.cm.clock.Now()
node.update(now)
if params.MinRecharge >= node.params.MinRecharge {
node.updateSchedule = nil
node.updateParams(params, now)
} else {
for i, s := range node.updateSchedule {
if params.MinRecharge >= s.params.MinRecharge {
s.params = params
node.updateSchedule = node.updateSchedule[:i+1]
return
}
}
return peer.bufValue, rcost
node.updateSchedule = append(node.updateSchedule, scheduledUpdate{time: now + mclock.AbsTime(DecParamDelay), params: params})
}
}
// updateParams updates the flow control parameters of the node
func (node *ClientNode) updateParams(params ServerParams, now mclock.AbsTime) {
diff := params.BufLimit - node.params.BufLimit
if int64(diff) > 0 {
node.bufValue += diff
} else if node.bufValue > params.BufLimit {
node.bufValue = params.BufLimit
}
node.cm.updateParams(node, params, now)
}
// AcceptRequest returns whether a new request can be accepted and the missing
// buffer amount if it was rejected due to a buffer underrun. If accepted, maxCost
// is deducted from the flow control buffer.
func (node *ClientNode) AcceptRequest(reqID, index, maxCost uint64) (accepted bool, bufShort uint64, priority int64) {
node.lock.Lock()
defer node.lock.Unlock()
now := node.cm.clock.Now()
node.update(now)
if maxCost > node.bufValue {
if node.log != nil {
node.log.add(now, fmt.Sprintf("rejected reqID=%d bv=%d maxCost=%d", reqID, node.bufValue, maxCost))
node.log.dump(now)
}
return false, maxCost - node.bufValue, 0
}
node.bufValue -= maxCost
node.sumCost += maxCost
if node.log != nil {
node.log.add(now, fmt.Sprintf("accepted reqID=%d bv=%d maxCost=%d sumCost=%d", reqID, node.bufValue, maxCost, node.sumCost))
}
node.accepted[index] = node.sumCost
return true, 0, node.cm.accepted(node, maxCost, now)
}
// RequestProcessed should be called when the request has been processed
func (node *ClientNode) RequestProcessed(reqID, index, maxCost, realCost uint64) (bv uint64) {
node.lock.Lock()
defer node.lock.Unlock()
now := node.cm.clock.Now()
node.update(now)
node.cm.processed(node, maxCost, realCost, now)
bv = node.bufValue + node.sumCost - node.accepted[index]
if node.log != nil {
node.log.add(now, fmt.Sprintf("processed reqID=%d bv=%d maxCost=%d realCost=%d sumCost=%d oldSumCost=%d reportedBV=%d", reqID, node.bufValue, maxCost, realCost, node.sumCost, node.accepted[index], bv))
}
delete(node.accepted, index)
return
}
// ServerNode is the flow control system's representation of a server
// (used in client mode only)
type ServerNode struct {
clock mclock.Clock
bufEstimate uint64
bufRecharge bool
lastTime mclock.AbsTime
params *ServerParams
params ServerParams
sumCost uint64 // sum of req costs sent to this server
pending map[uint64]uint64 // value = sumCost after sending the given req
log *logger
lock sync.RWMutex
}
func NewServerNode(params *ServerParams) *ServerNode {
return &ServerNode{
// NewServerNode returns a new ServerNode
func NewServerNode(params ServerParams, clock mclock.Clock) *ServerNode {
node := &ServerNode{
clock: clock,
bufEstimate: params.BufLimit,
lastTime: mclock.Now(),
bufRecharge: false,
lastTime: clock.Now(),
params: params,
pending: make(map[uint64]uint64),
}
if keepLogs > 0 {
node.log = newLogger(keepLogs)
}
return node
}
func (peer *ServerNode) recalcBLE(time mclock.AbsTime) {
dt := uint64(time - peer.lastTime)
if time < peer.lastTime {
dt = 0
// UpdateParams updates the flow control parameters of the node
func (node *ServerNode) UpdateParams(params ServerParams) {
node.lock.Lock()
defer node.lock.Unlock()
node.recalcBLE(mclock.Now())
if params.BufLimit > node.params.BufLimit {
node.bufEstimate += params.BufLimit - node.params.BufLimit
} else {
if node.bufEstimate > params.BufLimit {
node.bufEstimate = params.BufLimit
}
peer.bufEstimate += peer.params.MinRecharge * dt / uint64(fcTimeConst)
if peer.bufEstimate > peer.params.BufLimit {
peer.bufEstimate = peer.params.BufLimit
}
peer.lastTime = time
node.params = params
}
// recalcBLE recalculates the lowest estimate for the client's buffer value at
// the given server at the specified time
func (node *ServerNode) recalcBLE(now mclock.AbsTime) {
if now < node.lastTime {
return
}
if node.bufRecharge {
dt := uint64(now - node.lastTime)
node.bufEstimate += node.params.MinRecharge * dt / uint64(fcTimeConst)
if node.bufEstimate >= node.params.BufLimit {
node.bufEstimate = node.params.BufLimit
node.bufRecharge = false
}
}
node.lastTime = now
if node.log != nil {
node.log.add(now, fmt.Sprintf("updated bufEst=%d MRR=%d BufLimit=%d", node.bufEstimate, node.params.MinRecharge, node.params.BufLimit))
}
}
// safetyMargin is added to the flow control waiting time when estimated buffer value is low
const safetyMargin = time.Millisecond
func (peer *ServerNode) canSend(maxCost uint64) (time.Duration, float64) {
peer.recalcBLE(mclock.Now())
maxCost += uint64(safetyMargin) * peer.params.MinRecharge / uint64(fcTimeConst)
if maxCost > peer.params.BufLimit {
maxCost = peer.params.BufLimit
}
if peer.bufEstimate >= maxCost {
return 0, float64(peer.bufEstimate-maxCost) / float64(peer.params.BufLimit)
}
return time.Duration((maxCost - peer.bufEstimate) * uint64(fcTimeConst) / peer.params.MinRecharge), 0
}
// CanSend returns the minimum waiting time required before sending a request
// with the given maximum estimated cost. Second return value is the relative
// estimated buffer level after sending the request (divided by BufLimit).
func (peer *ServerNode) CanSend(maxCost uint64) (time.Duration, float64) {
peer.lock.RLock()
defer peer.lock.RUnlock()
func (node *ServerNode) CanSend(maxCost uint64) (time.Duration, float64) {
node.lock.RLock()
defer node.lock.RUnlock()
return peer.canSend(maxCost)
}
// QueueRequest should be called when the request has been assigned to the given
// server node, before putting it in the send queue. It is mandatory that requests
// are sent in the same order as the QueueRequest calls are made.
func (peer *ServerNode) QueueRequest(reqID, maxCost uint64) {
peer.lock.Lock()
defer peer.lock.Unlock()
peer.bufEstimate -= maxCost
peer.sumCost += maxCost
peer.pending[reqID] = peer.sumCost
}
// GotReply adjusts estimated buffer value according to the value included in
// the latest request reply.
func (peer *ServerNode) GotReply(reqID, bv uint64) {
peer.lock.Lock()
defer peer.lock.Unlock()
if bv > peer.params.BufLimit {
bv = peer.params.BufLimit
now := node.clock.Now()
node.recalcBLE(now)
maxCost += uint64(safetyMargin) * node.params.MinRecharge / uint64(fcTimeConst)
if maxCost > node.params.BufLimit {
maxCost = node.params.BufLimit
}
sc, ok := peer.pending[reqID]
if node.bufEstimate >= maxCost {
relBuf := float64(node.bufEstimate-maxCost) / float64(node.params.BufLimit)
if node.log != nil {
node.log.add(now, fmt.Sprintf("canSend bufEst=%d maxCost=%d true relBuf=%f", node.bufEstimate, maxCost, relBuf))
}
return 0, relBuf
}
timeLeft := time.Duration((maxCost - node.bufEstimate) * uint64(fcTimeConst) / node.params.MinRecharge)
if node.log != nil {
node.log.add(now, fmt.Sprintf("canSend bufEst=%d maxCost=%d false timeLeft=%v", node.bufEstimate, maxCost, timeLeft))
}
return timeLeft, 0
}
// QueuedRequest should be called when the request has been assigned to the given
// server node, before putting it in the send queue. It is mandatory that requests
// are sent in the same order as the QueuedRequest calls are made.
func (node *ServerNode) QueuedRequest(reqID, maxCost uint64) {
node.lock.Lock()
defer node.lock.Unlock()
now := node.clock.Now()
node.recalcBLE(now)
// Note: we do not know when requests actually arrive to the server so bufRecharge
// is not turned on here if buffer was full; in this case it is going to be turned
// on by the first reply's bufValue feedback
if node.bufEstimate >= maxCost {
node.bufEstimate -= maxCost
} else {
log.Error("Queued request with insufficient buffer estimate")
node.bufEstimate = 0
}
node.sumCost += maxCost
node.pending[reqID] = node.sumCost
if node.log != nil {
node.log.add(now, fmt.Sprintf("queued reqID=%d bufEst=%d maxCost=%d sumCost=%d", reqID, node.bufEstimate, maxCost, node.sumCost))
}
}
// ReceivedReply adjusts estimated buffer value according to the value included in
// the latest request reply.
func (node *ServerNode) ReceivedReply(reqID, bv uint64) {
node.lock.Lock()
defer node.lock.Unlock()
now := node.clock.Now()
node.recalcBLE(now)
if bv > node.params.BufLimit {
bv = node.params.BufLimit
}
sc, ok := node.pending[reqID]
if !ok {
return
}
delete(peer.pending, reqID)
cc := peer.sumCost - sc
peer.bufEstimate = 0
delete(node.pending, reqID)
cc := node.sumCost - sc
newEstimate := uint64(0)
if bv > cc {
peer.bufEstimate = bv - cc
newEstimate = bv - cc
}
if newEstimate > node.bufEstimate {
// Note: we never reduce the buffer estimate based on the reported value because
// this can only happen because of the delayed delivery of the latest reply.
// The lowest estimate based on the previous reply can still be considered valid.
node.bufEstimate = newEstimate
}
node.bufRecharge = node.bufEstimate < node.params.BufLimit
node.lastTime = now
if node.log != nil {
node.log.add(now, fmt.Sprintf("received reqID=%d bufEst=%d reportedBv=%d sumCost=%d oldSumCost=%d", reqID, node.bufEstimate, bv, node.sumCost, sc))
}
}
// DumpLogs dumps the event log if logging is used
func (node *ServerNode) DumpLogs() {
node.lock.Lock()
defer node.lock.Unlock()
if node.log != nil {
node.log.dump(node.clock.Now())
}
peer.lastTime = mclock.Now()
}

65
les/flowcontrol/logger.go Normal file
View File

@ -0,0 +1,65 @@
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package flowcontrol
import (
"fmt"
"time"
"github.com/ethereum/go-ethereum/common/mclock"
)
// logger collects events in string format and discards events older than the
// "keep" parameter
type logger struct {
events map[uint64]logEvent
writePtr, delPtr uint64
keep time.Duration
}
// logEvent describes a single event
type logEvent struct {
time mclock.AbsTime
event string
}
// newLogger creates a new logger
func newLogger(keep time.Duration) *logger {
return &logger{
events: make(map[uint64]logEvent),
keep: keep,
}
}
// add adds a new event and discards old events if possible
func (l *logger) add(now mclock.AbsTime, event string) {
keepAfter := now - mclock.AbsTime(l.keep)
for l.delPtr < l.writePtr && l.events[l.delPtr].time <= keepAfter {
delete(l.events, l.delPtr)
l.delPtr++
}
l.events[l.writePtr] = logEvent{now, event}
l.writePtr++
}
// dump prints all stored events
func (l *logger) dump(now mclock.AbsTime) {
for i := l.delPtr; i < l.writePtr; i++ {
e := l.events[i]
fmt.Println(time.Duration(e.time-now), e.event)
}
}

View File

@ -1,4 +1,4 @@
// Copyright 2016 The go-ethereum Authors
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
@ -14,211 +14,388 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package flowcontrol implements a client side flow control mechanism
package flowcontrol
import (
"fmt"
"math"
"sync"
"time"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/common/prque"
)
const rcConst = 1000000
type cmNode struct {
node *ClientNode
lastUpdate mclock.AbsTime
serving, recharging bool
rcWeight uint64
rcValue, rcDelta, startValue int64
finishRecharge mclock.AbsTime
// cmNodeFields are ClientNode fields used by the client manager
// Note: these fields are locked by the client manager's mutex
type cmNodeFields struct {
corrBufValue int64 // buffer value adjusted with the extra recharge amount
rcLastIntValue int64 // past recharge integrator value when corrBufValue was last updated
rcFullIntValue int64 // future recharge integrator value when corrBufValue will reach maximum
queueIndex int // position in the recharge queue (-1 if not queued)
}
func (node *cmNode) update(time mclock.AbsTime) {
dt := int64(time - node.lastUpdate)
node.rcValue += node.rcDelta * dt / rcConst
node.lastUpdate = time
if node.recharging && time >= node.finishRecharge {
node.recharging = false
node.rcDelta = 0
node.rcValue = 0
}
}
// FixedPointMultiplier is applied to the recharge integrator and the recharge curve.
//
// Note: fixed point arithmetic is required for the integrator because it is a
// constantly increasing value that can wrap around int64 limits (which behavior is
// also supported by the priority queue). A floating point value would gradually lose
// precision in this application.
// The recharge curve and all recharge values are encoded as fixed point because
// sumRecharge is frequently updated by adding or subtracting individual recharge
// values and perfect precision is required.
const FixedPointMultiplier = 1000000
func (node *cmNode) set(serving bool, simReqCnt, sumWeight uint64) {
if node.serving && !serving {
node.recharging = true
sumWeight += node.rcWeight
}
node.serving = serving
if node.recharging && serving {
node.recharging = false
sumWeight -= node.rcWeight
}
node.rcDelta = 0
if serving {
node.rcDelta = int64(rcConst / simReqCnt)
}
if node.recharging {
node.rcDelta = -int64(node.node.cm.rcRecharge * node.rcWeight / sumWeight)
node.finishRecharge = node.lastUpdate + mclock.AbsTime(node.rcValue*rcConst/(-node.rcDelta))
}
}
var (
capFactorDropTC = 1 / float64(time.Second*10) // time constant for dropping the capacity factor
capFactorRaiseTC = 1 / float64(time.Hour) // time constant for raising the capacity factor
capFactorRaiseThreshold = 0.75 // connected / total capacity ratio threshold for raising the capacity factor
)
// ClientManager controls the capacity assigned to the clients of a server.
// Since ServerParams guarantee a safe lower estimate for processable requests
// even in case of all clients being active, ClientManager calculates a
// corrigated buffer value and usually allows a higher remaining buffer value
// to be returned with each reply.
type ClientManager struct {
clock mclock.Clock
lock sync.Mutex
nodes map[*cmNode]struct{}
simReqCnt, sumWeight, rcSumValue uint64
maxSimReq, maxRcSum uint64
rcRecharge uint64
resumeQueue chan chan bool
time mclock.AbsTime
enabledCh chan struct{}
curve PieceWiseLinear
sumRecharge, totalRecharge, totalConnected uint64
capLogFactor, totalCapacity float64
capLastUpdate mclock.AbsTime
totalCapacityCh chan uint64
// recharge integrator is increasing in each moment with a rate of
// (totalRecharge / sumRecharge)*FixedPointMultiplier or 0 if sumRecharge==0
rcLastUpdate mclock.AbsTime // last time the recharge integrator was updated
rcLastIntValue int64 // last updated value of the recharge integrator
// recharge queue is a priority queue with currently recharging client nodes
// as elements. The priority value is rcFullIntValue which allows to quickly
// determine which client will first finish recharge.
rcQueue *prque.Prque
}
func NewClientManager(rcTarget, maxSimReq, maxRcSum uint64) *ClientManager {
// NewClientManager returns a new client manager.
// Client manager enhances flow control performance by allowing client buffers
// to recharge quicker than the minimum guaranteed recharge rate if possible.
// The sum of all minimum recharge rates (sumRecharge) is updated each time
// a clients starts or finishes buffer recharging. Then an adjusted total
// recharge rate is calculated using a piecewise linear recharge curve:
//
// totalRecharge = curve(sumRecharge)
// (totalRecharge >= sumRecharge is enforced)
//
// Then the "bonus" buffer recharge is distributed between currently recharging
// clients proportionally to their minimum recharge rates.
//
// Note: total recharge is proportional to the average number of parallel running
// serving threads. A recharge value of 1000000 corresponds to one thread in average.
// The maximum number of allowed serving threads should always be considerably
// higher than the targeted average number.
//
// Note 2: although it is possible to specify a curve allowing the total target
// recharge starting from zero sumRecharge, it makes sense to add a linear ramp
// starting from zero in order to not let a single low-priority client use up
// the entire server capacity and thus ensure quick availability for others at
// any moment.
func NewClientManager(curve PieceWiseLinear, clock mclock.Clock) *ClientManager {
cm := &ClientManager{
nodes: make(map[*cmNode]struct{}),
resumeQueue: make(chan chan bool),
rcRecharge: rcConst * rcConst / (100*rcConst/rcTarget - rcConst),
maxSimReq: maxSimReq,
maxRcSum: maxRcSum,
clock: clock,
rcQueue: prque.New(func(a interface{}, i int) { a.(*ClientNode).queueIndex = i }),
capLastUpdate: clock.Now(),
}
if curve != nil {
cm.SetRechargeCurve(curve)
}
go cm.queueProc()
return cm
}
func (self *ClientManager) Stop() {
self.lock.Lock()
defer self.lock.Unlock()
// SetRechargeCurve updates the recharge curve
func (cm *ClientManager) SetRechargeCurve(curve PieceWiseLinear) {
cm.lock.Lock()
defer cm.lock.Unlock()
// signal any waiting accept routines to return false
self.nodes = make(map[*cmNode]struct{})
close(self.resumeQueue)
}
func (self *ClientManager) addNode(cnode *ClientNode) *cmNode {
time := mclock.Now()
node := &cmNode{
node: cnode,
lastUpdate: time,
finishRecharge: time,
rcWeight: 1,
}
self.lock.Lock()
defer self.lock.Unlock()
self.nodes[node] = struct{}{}
self.update(mclock.Now())
return node
}
func (self *ClientManager) removeNode(node *cmNode) {
self.lock.Lock()
defer self.lock.Unlock()
time := mclock.Now()
self.stop(node, time)
delete(self.nodes, node)
self.update(time)
}
// recalc sumWeight
func (self *ClientManager) updateNodes(time mclock.AbsTime) (rce bool) {
var sumWeight, rcSum uint64
for node := range self.nodes {
rc := node.recharging
node.update(time)
if rc && !node.recharging {
rce = true
}
if node.recharging {
sumWeight += node.rcWeight
}
rcSum += uint64(node.rcValue)
}
self.sumWeight = sumWeight
self.rcSumValue = rcSum
return
}
func (self *ClientManager) update(time mclock.AbsTime) {
for {
firstTime := time
for node := range self.nodes {
if node.recharging && node.finishRecharge < firstTime {
firstTime = node.finishRecharge
}
}
if self.updateNodes(firstTime) {
for node := range self.nodes {
if node.recharging {
node.set(node.serving, self.simReqCnt, self.sumWeight)
}
}
now := cm.clock.Now()
cm.updateRecharge(now)
cm.updateCapFactor(now, false)
cm.curve = curve
if len(curve) > 0 {
cm.totalRecharge = curve[len(curve)-1].Y
} else {
self.time = time
cm.totalRecharge = 0
}
cm.refreshCapacity()
}
// connect should be called when a client is connected, before passing it to any
// other ClientManager function
func (cm *ClientManager) connect(node *ClientNode) {
cm.lock.Lock()
defer cm.lock.Unlock()
now := cm.clock.Now()
cm.updateRecharge(now)
node.corrBufValue = int64(node.params.BufLimit)
node.rcLastIntValue = cm.rcLastIntValue
node.queueIndex = -1
cm.updateCapFactor(now, true)
cm.totalConnected += node.params.MinRecharge
}
// disconnect should be called when a client is disconnected
func (cm *ClientManager) disconnect(node *ClientNode) {
cm.lock.Lock()
defer cm.lock.Unlock()
now := cm.clock.Now()
cm.updateRecharge(cm.clock.Now())
cm.updateCapFactor(now, true)
cm.totalConnected -= node.params.MinRecharge
}
// accepted is called when a request with given maximum cost is accepted.
// It returns a priority indicator for the request which is used to determine placement
// in the serving queue. Older requests have higher priority by default. If the client
// is almost out of buffer, request priority is reduced.
func (cm *ClientManager) accepted(node *ClientNode, maxCost uint64, now mclock.AbsTime) (priority int64) {
cm.lock.Lock()
defer cm.lock.Unlock()
cm.updateNodeRc(node, -int64(maxCost), &node.params, now)
rcTime := (node.params.BufLimit - uint64(node.corrBufValue)) * FixedPointMultiplier / node.params.MinRecharge
return -int64(now) - int64(rcTime)
}
// processed updates the client buffer according to actual request cost after
// serving has been finished.
//
// Note: processed should always be called for all accepted requests
func (cm *ClientManager) processed(node *ClientNode, maxCost, realCost uint64, now mclock.AbsTime) {
cm.lock.Lock()
defer cm.lock.Unlock()
if realCost > maxCost {
realCost = maxCost
}
cm.updateNodeRc(node, int64(maxCost-realCost), &node.params, now)
if uint64(node.corrBufValue) > node.bufValue {
if node.log != nil {
node.log.add(now, fmt.Sprintf("corrected bv=%d oldBv=%d", node.corrBufValue, node.bufValue))
}
node.bufValue = uint64(node.corrBufValue)
}
}
// updateParams updates the flow control parameters of a client node
func (cm *ClientManager) updateParams(node *ClientNode, params ServerParams, now mclock.AbsTime) {
cm.lock.Lock()
defer cm.lock.Unlock()
cm.updateRecharge(now)
cm.updateCapFactor(now, true)
cm.totalConnected += params.MinRecharge - node.params.MinRecharge
cm.updateNodeRc(node, 0, &params, now)
}
// updateRecharge updates the recharge integrator and checks the recharge queue
// for nodes with recently filled buffers
func (cm *ClientManager) updateRecharge(now mclock.AbsTime) {
lastUpdate := cm.rcLastUpdate
cm.rcLastUpdate = now
// updating is done in multiple steps if node buffers are filled and sumRecharge
// is decreased before the given target time
for cm.sumRecharge > 0 {
bonusRatio := cm.curve.ValueAt(cm.sumRecharge) / float64(cm.sumRecharge)
if bonusRatio < 1 {
bonusRatio = 1
}
dt := now - lastUpdate
// fetch the client that finishes first
rcqNode := cm.rcQueue.PopItem().(*ClientNode) // if sumRecharge > 0 then the queue cannot be empty
// check whether it has already finished
dtNext := mclock.AbsTime(float64(rcqNode.rcFullIntValue-cm.rcLastIntValue) / bonusRatio)
if dt < dtNext {
// not finished yet, put it back, update integrator according
// to current bonusRatio and return
cm.rcQueue.Push(rcqNode, -rcqNode.rcFullIntValue)
cm.rcLastIntValue += int64(bonusRatio * float64(dt))
return
}
lastUpdate += dtNext
// finished recharging, update corrBufValue and sumRecharge if necessary and do next step
if rcqNode.corrBufValue < int64(rcqNode.params.BufLimit) {
rcqNode.corrBufValue = int64(rcqNode.params.BufLimit)
cm.updateCapFactor(lastUpdate, true)
cm.sumRecharge -= rcqNode.params.MinRecharge
}
cm.rcLastIntValue = rcqNode.rcFullIntValue
}
}
func (self *ClientManager) canStartReq() bool {
return self.simReqCnt < self.maxSimReq && self.rcSumValue < self.maxRcSum
// updateNodeRc updates a node's corrBufValue and adds an external correction value.
// It also adds or removes the rcQueue entry and updates ServerParams and sumRecharge if necessary.
func (cm *ClientManager) updateNodeRc(node *ClientNode, bvc int64, params *ServerParams, now mclock.AbsTime) {
cm.updateRecharge(now)
wasFull := true
if node.corrBufValue != int64(node.params.BufLimit) {
wasFull = false
node.corrBufValue += (cm.rcLastIntValue - node.rcLastIntValue) * int64(node.params.MinRecharge) / FixedPointMultiplier
if node.corrBufValue > int64(node.params.BufLimit) {
node.corrBufValue = int64(node.params.BufLimit)
}
node.rcLastIntValue = cm.rcLastIntValue
}
node.corrBufValue += bvc
if node.corrBufValue < 0 {
node.corrBufValue = 0
}
diff := int64(params.BufLimit - node.params.BufLimit)
if diff > 0 {
node.corrBufValue += diff
}
isFull := false
if node.corrBufValue >= int64(params.BufLimit) {
node.corrBufValue = int64(params.BufLimit)
isFull = true
}
sumRecharge := cm.sumRecharge
if !wasFull {
sumRecharge -= node.params.MinRecharge
}
if params != &node.params {
node.params = *params
}
if !isFull {
sumRecharge += node.params.MinRecharge
if node.queueIndex != -1 {
cm.rcQueue.Remove(node.queueIndex)
}
node.rcLastIntValue = cm.rcLastIntValue
node.rcFullIntValue = cm.rcLastIntValue + (int64(node.params.BufLimit)-node.corrBufValue)*FixedPointMultiplier/int64(node.params.MinRecharge)
cm.rcQueue.Push(node, -node.rcFullIntValue)
}
if sumRecharge != cm.sumRecharge {
cm.updateCapFactor(now, true)
cm.sumRecharge = sumRecharge
}
}
func (self *ClientManager) queueProc() {
for rc := range self.resumeQueue {
for {
time.Sleep(time.Millisecond * 10)
self.lock.Lock()
self.update(mclock.Now())
cs := self.canStartReq()
self.lock.Unlock()
if cs {
break
// updateCapFactor updates the total capacity factor. The capacity factor allows
// the total capacity of the system to go over the allowed total recharge value
// if the sum of momentarily recharging clients only exceeds the total recharge
// allowance in a very small fraction of time.
// The capacity factor is dropped quickly (with a small time constant) if sumRecharge
// exceeds totalRecharge. It is raised slowly (with a large time constant) if most
// of the total capacity is used by connected clients (totalConnected is larger than
// totalCapacity*capFactorRaiseThreshold) and sumRecharge stays under
// totalRecharge*totalConnected/totalCapacity.
func (cm *ClientManager) updateCapFactor(now mclock.AbsTime, refresh bool) {
if cm.totalRecharge == 0 {
return
}
dt := now - cm.capLastUpdate
cm.capLastUpdate = now
var d float64
if cm.sumRecharge > cm.totalRecharge {
d = (1 - float64(cm.sumRecharge)/float64(cm.totalRecharge)) * capFactorDropTC
} else {
totalConnected := float64(cm.totalConnected)
var connRatio float64
if totalConnected < cm.totalCapacity {
connRatio = totalConnected / cm.totalCapacity
} else {
connRatio = 1
}
if connRatio > capFactorRaiseThreshold {
sumRecharge := float64(cm.sumRecharge)
limit := float64(cm.totalRecharge) * connRatio
if sumRecharge < limit {
d = (1 - sumRecharge/limit) * (connRatio - capFactorRaiseThreshold) * (1 / (1 - capFactorRaiseThreshold)) * capFactorRaiseTC
}
}
close(rc)
}
if d != 0 {
cm.capLogFactor += d * float64(dt)
if cm.capLogFactor < 0 {
cm.capLogFactor = 0
}
if refresh {
cm.refreshCapacity()
}
}
}
func (self *ClientManager) accept(node *cmNode, time mclock.AbsTime) bool {
self.lock.Lock()
defer self.lock.Unlock()
// refreshCapacity recalculates the total capacity value and sends an update to the subscription
// channel if the relative change of the value since the last update is more than 0.1 percent
func (cm *ClientManager) refreshCapacity() {
totalCapacity := float64(cm.totalRecharge) * math.Exp(cm.capLogFactor)
if totalCapacity >= cm.totalCapacity*0.999 && totalCapacity <= cm.totalCapacity*1.001 {
return
}
cm.totalCapacity = totalCapacity
if cm.totalCapacityCh != nil {
select {
case cm.totalCapacityCh <- uint64(cm.totalCapacity):
default:
}
}
}
self.update(time)
if !self.canStartReq() {
resume := make(chan bool)
self.lock.Unlock()
self.resumeQueue <- resume
<-resume
self.lock.Lock()
if _, ok := self.nodes[node]; !ok {
return false // reject if node has been removed or manager has been stopped
// SubscribeTotalCapacity returns all future updates to the total capacity value
// through a channel and also returns the current value
func (cm *ClientManager) SubscribeTotalCapacity(ch chan uint64) uint64 {
cm.lock.Lock()
defer cm.lock.Unlock()
cm.totalCapacityCh = ch
return uint64(cm.totalCapacity)
}
// PieceWiseLinear is used to describe recharge curves
type PieceWiseLinear []struct{ X, Y uint64 }
// ValueAt returns the curve's value at a given point
func (pwl PieceWiseLinear) ValueAt(x uint64) float64 {
l := 0
h := len(pwl)
if h == 0 {
return 0
}
for h != l {
m := (l + h) / 2
if x > pwl[m].X {
l = m + 1
} else {
h = m
}
}
self.simReqCnt++
node.set(true, self.simReqCnt, self.sumWeight)
node.startValue = node.rcValue
self.update(self.time)
if l == 0 {
return float64(pwl[0].Y)
}
l--
if h == len(pwl) {
return float64(pwl[l].Y)
}
dx := pwl[h].X - pwl[l].X
if dx < 1 {
return float64(pwl[l].Y)
}
return float64(pwl[l].Y) + float64(pwl[h].Y-pwl[l].Y)*float64(x-pwl[l].X)/float64(dx)
}
// Valid returns true if the X coordinates of the curve points are non-strictly monotonic
func (pwl PieceWiseLinear) Valid() bool {
var lastX uint64
for _, i := range pwl {
if i.X < lastX {
return false
}
lastX = i.X
}
return true
}
func (self *ClientManager) stop(node *cmNode, time mclock.AbsTime) {
if node.serving {
self.update(time)
self.simReqCnt--
node.set(false, self.simReqCnt, self.sumWeight)
self.update(time)
}
}
func (self *ClientManager) processed(node *cmNode, time mclock.AbsTime) (rcValue, rcCost uint64) {
self.lock.Lock()
defer self.lock.Unlock()
self.stop(node, time)
return uint64(node.rcValue), uint64(node.rcValue - node.startValue)
}

View File

@ -0,0 +1,123 @@
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package flowcontrol
import (
"math/rand"
"testing"
"time"
"github.com/ethereum/go-ethereum/common/mclock"
)
type testNode struct {
node *ClientNode
bufLimit, capacity uint64
waitUntil mclock.AbsTime
index, totalCost uint64
}
const (
testMaxCost = 1000000
testLength = 100000
)
// testConstantTotalCapacity simulates multiple request sender nodes and verifies
// whether the total amount of served requests matches the expected value based on
// the total capacity and the duration of the test.
// Some nodes are sending requests occasionally so that their buffer should regularly
// reach the maximum while other nodes (the "max capacity nodes") are sending at the
// maximum permitted rate. The max capacity nodes are changed multiple times during
// a single test.
func TestConstantTotalCapacity(t *testing.T) {
testConstantTotalCapacity(t, 10, 1, 0)
testConstantTotalCapacity(t, 10, 1, 1)
testConstantTotalCapacity(t, 30, 1, 0)
testConstantTotalCapacity(t, 30, 2, 3)
testConstantTotalCapacity(t, 100, 1, 0)
testConstantTotalCapacity(t, 100, 3, 5)
testConstantTotalCapacity(t, 100, 5, 10)
}
func testConstantTotalCapacity(t *testing.T, nodeCount, maxCapacityNodes, randomSend int) {
clock := &mclock.Simulated{}
nodes := make([]*testNode, nodeCount)
var totalCapacity uint64
for i := range nodes {
nodes[i] = &testNode{capacity: uint64(50000 + rand.Intn(100000))}
totalCapacity += nodes[i].capacity
}
m := NewClientManager(PieceWiseLinear{{0, totalCapacity}}, clock)
for _, n := range nodes {
n.bufLimit = n.capacity * 6000 //uint64(2000+rand.Intn(10000))
n.node = NewClientNode(m, ServerParams{BufLimit: n.bufLimit, MinRecharge: n.capacity})
}
maxNodes := make([]int, maxCapacityNodes)
for i := range maxNodes {
// we don't care if some indexes are selected multiple times
// in that case we have fewer max nodes
maxNodes[i] = rand.Intn(nodeCount)
}
for i := 0; i < testLength; i++ {
now := clock.Now()
for _, idx := range maxNodes {
for nodes[idx].send(t, now) {
}
}
if rand.Intn(testLength) < maxCapacityNodes*3 {
maxNodes[rand.Intn(maxCapacityNodes)] = rand.Intn(nodeCount)
}
sendCount := randomSend
for sendCount > 0 {
if nodes[rand.Intn(nodeCount)].send(t, now) {
sendCount--
}
}
clock.Run(time.Millisecond)
}
var totalCost uint64
for _, n := range nodes {
totalCost += n.totalCost
}
ratio := float64(totalCost) / float64(totalCapacity) / testLength
if ratio < 0.98 || ratio > 1.02 {
t.Errorf("totalCost/totalCapacity/testLength ratio incorrect (expected: 1, got: %f)", ratio)
}
}
func (n *testNode) send(t *testing.T, now mclock.AbsTime) bool {
if now < n.waitUntil {
return false
}
n.index++
if ok, _, _ := n.node.AcceptRequest(0, n.index, testMaxCost); !ok {
t.Fatalf("Rejected request after expected waiting time has passed")
}
rcost := uint64(rand.Int63n(testMaxCost))
bv := n.node.RequestProcessed(0, n.index, testMaxCost, rcost)
if bv < testMaxCost {
n.waitUntil = now + mclock.AbsTime((testMaxCost-bv)*1001000/n.capacity)
}
//n.waitUntil = now + mclock.AbsTime(float64(testMaxCost)*1001000/float64(n.capacity)*(1-float64(bv)/float64(n.bufLimit)))
n.totalCost += rcost
return true
}

View File

@ -14,12 +14,12 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (
"io"
"math"
"net"
"sync"
"time"
@ -48,8 +48,10 @@ type freeClientPool struct {
lock sync.Mutex
clock mclock.Clock
closed bool
removePeer func(string)
connectedLimit, totalLimit int
freeClientCap uint64
addressMap map[string]*freeClientPoolEntry
connPool, disconnPool *prque.Prque
@ -64,15 +66,16 @@ const (
)
// newFreeClientPool creates a new free client pool
func newFreeClientPool(db ethdb.Database, connectedLimit, totalLimit int, clock mclock.Clock) *freeClientPool {
func newFreeClientPool(db ethdb.Database, freeClientCap uint64, totalLimit int, clock mclock.Clock, removePeer func(string)) *freeClientPool {
pool := &freeClientPool{
db: db,
clock: clock,
addressMap: make(map[string]*freeClientPoolEntry),
connPool: prque.New(poolSetIndex),
disconnPool: prque.New(poolSetIndex),
connectedLimit: connectedLimit,
freeClientCap: freeClientCap,
totalLimit: totalLimit,
removePeer: removePeer,
}
pool.loadFromDb()
return pool
@ -85,22 +88,34 @@ func (f *freeClientPool) stop() {
f.lock.Unlock()
}
// registerPeer implements clientPool
func (f *freeClientPool) registerPeer(p *peer) {
if addr, ok := p.RemoteAddr().(*net.TCPAddr); ok {
if !f.connect(addr.IP.String(), p.id) {
f.removePeer(p.id)
}
}
}
// connect should be called after a successful handshake. If the connection was
// rejected, there is no need to call disconnect.
//
// Note: the disconnectFn callback should not block.
func (f *freeClientPool) connect(address string, disconnectFn func()) bool {
func (f *freeClientPool) connect(address, id string) bool {
f.lock.Lock()
defer f.lock.Unlock()
if f.closed {
return false
}
if f.connectedLimit == 0 {
log.Debug("Client rejected", "address", address)
return false
}
e := f.addressMap[address]
now := f.clock.Now()
var recentUsage int64
if e == nil {
e = &freeClientPoolEntry{address: address, index: -1}
e = &freeClientPoolEntry{address: address, index: -1, id: id}
f.addressMap[address] = e
} else {
if e.connected {
@ -115,12 +130,7 @@ func (f *freeClientPool) connect(address string, disconnectFn func()) bool {
i := f.connPool.PopItem().(*freeClientPoolEntry)
if e.linUsage+int64(connectedBias)-i.linUsage < 0 {
// kick it out and accept the new client
f.connPool.Remove(i.index)
f.calcLogUsage(i, now)
i.connected = false
f.disconnPool.Push(i, -i.logUsage)
log.Debug("Client kicked out", "address", i.address)
i.disconnectFn()
f.dropClient(i, now)
} else {
// keep the old client and reject the new one
f.connPool.Push(i, i.linUsage)
@ -130,7 +140,7 @@ func (f *freeClientPool) connect(address string, disconnectFn func()) bool {
}
f.disconnPool.Remove(e.index)
e.connected = true
e.disconnectFn = disconnectFn
e.id = id
f.connPool.Push(e, e.linUsage)
if f.connPool.Size()+f.disconnPool.Size() > f.totalLimit {
f.disconnPool.Pop()
@ -139,6 +149,13 @@ func (f *freeClientPool) connect(address string, disconnectFn func()) bool {
return true
}
// unregisterPeer implements clientPool
func (f *freeClientPool) unregisterPeer(p *peer) {
if addr, ok := p.RemoteAddr().(*net.TCPAddr); ok {
f.disconnect(addr.IP.String())
}
}
// disconnect should be called when a connection is terminated. If the disconnection
// was initiated by the pool itself using disconnectFn then calling disconnect is
// not necessary but permitted.
@ -163,6 +180,34 @@ func (f *freeClientPool) disconnect(address string) {
log.Debug("Client disconnected", "address", address)
}
// setConnLimit sets the maximum number of free client slots and also drops
// some peers if necessary
func (f *freeClientPool) setLimits(count int, totalCap uint64) {
f.lock.Lock()
defer f.lock.Unlock()
f.connectedLimit = int(totalCap / f.freeClientCap)
if count < f.connectedLimit {
f.connectedLimit = count
}
now := mclock.Now()
for f.connPool.Size() > f.connectedLimit {
i := f.connPool.PopItem().(*freeClientPoolEntry)
f.dropClient(i, now)
}
}
// dropClient disconnects a client and also moves it from the connected to the
// disconnected pool
func (f *freeClientPool) dropClient(i *freeClientPoolEntry, now mclock.AbsTime) {
f.connPool.Remove(i.index)
f.calcLogUsage(i, now)
i.connected = false
f.disconnPool.Push(i, -i.logUsage)
log.Debug("Client kicked out", "address", i.address)
f.removePeer(i.id)
}
// logOffset calculates the time-dependent offset for the logarithmic
// representation of recent usage
func (f *freeClientPool) logOffset(now mclock.AbsTime) int64 {
@ -245,7 +290,7 @@ func (f *freeClientPool) saveToDb() {
// even though they are close to each other at any time they may wrap around int64
// limits over time. Comparison should be performed accordingly.
type freeClientPoolEntry struct {
address string
address, id string
connected bool
disconnectFn func()
linUsage, logUsage int64

View File

@ -14,13 +14,12 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package light implements on-demand retrieval capable state and chain objects
// for the Ethereum Light Client.
package les
import (
"fmt"
"math/rand"
"strconv"
"testing"
"time"
@ -46,30 +45,36 @@ func testFreeClientPool(t *testing.T, connLimit, clientCount int) {
var (
clock mclock.Simulated
db = ethdb.NewMemDatabase()
pool = newFreeClientPool(db, connLimit, 10000, &clock)
connected = make([]bool, clientCount)
connTicks = make([]int, clientCount)
disconnCh = make(chan int, clientCount)
)
peerId := func(i int) string {
return fmt.Sprintf("test peer #%d", i)
peerAddress = func(i int) string {
return fmt.Sprintf("addr #%d", i)
}
peerId = func(i int) string {
return fmt.Sprintf("id #%d", i)
}
disconnFn = func(id string) {
i, err := strconv.Atoi(id[4:])
if err != nil {
panic(err)
}
disconnFn := func(i int) func() {
return func() {
disconnCh <- i
}
}
pool = newFreeClientPool(db, 1, 10000, &clock, disconnFn)
)
pool.setLimits(connLimit, uint64(connLimit))
// pool should accept new peers up to its connected limit
for i := 0; i < connLimit; i++ {
if pool.connect(peerId(i), disconnFn(i)) {
if pool.connect(peerAddress(i), peerId(i)) {
connected[i] = true
} else {
t.Fatalf("Test peer #%d rejected", i)
}
}
// since all accepted peers are new and should not be kicked out, the next one should be rejected
if pool.connect(peerId(connLimit), disconnFn(connLimit)) {
if pool.connect(peerAddress(connLimit), peerId(connLimit)) {
connected[connLimit] = true
t.Fatalf("Peer accepted over connected limit")
}
@ -80,11 +85,11 @@ func testFreeClientPool(t *testing.T, connLimit, clientCount int) {
i := rand.Intn(clientCount)
if connected[i] {
pool.disconnect(peerId(i))
pool.disconnect(peerAddress(i))
connected[i] = false
connTicks[i] += tickCounter
} else {
if pool.connect(peerId(i), disconnFn(i)) {
if pool.connect(peerAddress(i), peerId(i)) {
connected[i] = true
connTicks[i] -= tickCounter
}
@ -93,7 +98,7 @@ func testFreeClientPool(t *testing.T, connLimit, clientCount int) {
for {
select {
case i := <-disconnCh:
pool.disconnect(peerId(i))
pool.disconnect(peerAddress(i))
if connected[i] {
connTicks[i] += tickCounter
connected[i] = false
@ -119,20 +124,21 @@ func testFreeClientPool(t *testing.T, connLimit, clientCount int) {
}
// a previously unknown peer should be accepted now
if !pool.connect("newPeer", func() {}) {
if !pool.connect("newAddr", "newId") {
t.Fatalf("Previously unknown peer rejected")
}
// close and restart pool
pool.stop()
pool = newFreeClientPool(db, connLimit, 10000, &clock)
pool = newFreeClientPool(db, 1, 10000, &clock, disconnFn)
pool.setLimits(connLimit, uint64(connLimit))
// try connecting all known peers (connLimit should be filled up)
for i := 0; i < clientCount; i++ {
pool.connect(peerId(i), func() {})
pool.connect(peerAddress(i), peerId(i))
}
// expect pool to remember known nodes and kick out one of them to accept a new one
if !pool.connect("newPeer2", func() {}) {
if !pool.connect("newAddr2", "newId2") {
t.Errorf("Previously unknown peer rejected after restarting pool")
}
pool.stop()

View File

@ -14,7 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (
@ -22,12 +21,10 @@ import (
"encoding/json"
"fmt"
"math/big"
"net"
"sync"
"time"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/consensus"
"github.com/ethereum/go-ethereum/core"
"github.com/ethereum/go-ethereum/core/rawdb"
@ -101,10 +98,10 @@ type ProtocolManager struct {
odr *LesOdr
server *LesServer
serverPool *serverPool
clientPool *freeClientPool
lesTopic discv5.Topic
reqDist *requestDistributor
retriever *retrieveManager
servingQueue *servingQueue
downloader *downloader.Downloader
fetcher *lightFetcher
@ -165,6 +162,8 @@ func NewProtocolManager(
if odr != nil {
manager.retriever = odr.retriever
manager.reqDist = odr.retriever.dist
} else {
manager.servingQueue = newServingQueue(int64(time.Millisecond * 10))
}
if ulcConfig != nil {
@ -181,7 +180,6 @@ func NewProtocolManager(
manager.peers.notify((*downloaderPeerNotify)(manager))
manager.fetcher = newLightFetcher(manager)
}
return manager, nil
}
@ -192,11 +190,9 @@ func (pm *ProtocolManager) removePeer(id string) {
func (pm *ProtocolManager) Start(maxPeers int) {
pm.maxPeers = maxPeers
if pm.lightSync {
go pm.syncer()
} else {
pm.clientPool = newFreeClientPool(pm.chainDb, maxPeers, 10000, mclock.System{})
go func() {
for range pm.newPeerCh {
}
@ -214,8 +210,9 @@ func (pm *ProtocolManager) Stop() {
pm.noMorePeers <- struct{}{}
close(pm.quitSync) // quits syncer, fetcher
if pm.clientPool != nil {
pm.clientPool.stop()
if pm.servingQueue != nil {
pm.servingQueue.stop()
}
// Disconnect existing sessions.
@ -286,17 +283,8 @@ func (pm *ProtocolManager) handle(p *peer) error {
p.Log().Debug("Light Ethereum handshake failed", "err", err)
return err
}
if !pm.lightSync && !p.Peer.Info().Network.Trusted {
addr, ok := p.RemoteAddr().(*net.TCPAddr)
// test peer address is not a tcp address, don't use client pool if can not typecast
if ok {
id := addr.IP.String()
if !pm.clientPool.connect(id, func() { go pm.removePeer(p.id) }) {
return p2p.DiscTooManyPeers
}
defer pm.clientPool.disconnect(id)
}
if p.fcClient != nil {
defer p.fcClient.Disconnect()
}
if rw, ok := p.rw.(*meteredMsgReadWriter); ok {
@ -309,9 +297,6 @@ func (pm *ProtocolManager) handle(p *peer) error {
return err
}
defer func() {
if pm.server != nil && pm.server.fcManager != nil && p.fcClient != nil {
p.fcClient.Remove(pm.server.fcManager)
}
pm.removePeer(p.id)
}()
@ -329,31 +314,18 @@ func (pm *ProtocolManager) handle(p *peer) error {
}
}
stop := make(chan struct{})
defer close(stop)
go func() {
// new block announce loop
for {
select {
case announce := <-p.announceChn:
p.SendAnnounce(announce)
case <-stop:
return
}
}
}()
// main loop. handle incoming messages.
for {
if err := pm.handleMsg(p); err != nil {
p.Log().Debug("Light Ethereum message handling failed", "err", err)
if p.fcServer != nil {
p.fcServer.DumpLogs()
}
return err
}
}
}
var reqList = []uint64{GetBlockHeadersMsg, GetBlockBodiesMsg, GetCodeMsg, GetReceiptsMsg, GetProofsV1Msg, SendTxMsg, SendTxV2Msg, GetTxStatusMsg, GetHeaderProofsMsg, GetProofsV2Msg, GetHelperTrieProofsMsg}
// handleMsg is invoked whenever an inbound message is received from a remote
// peer. The remote connection is torn down upon returning any error.
func (pm *ProtocolManager) handleMsg(p *peer) error {
@ -364,22 +336,31 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
}
p.Log().Trace("Light Ethereum message arrived", "code", msg.Code, "bytes", msg.Size)
costs := p.fcCosts[msg.Code]
reject := func(reqCnt, maxCnt uint64) bool {
p.responseCount++
responseCount := p.responseCount
var (
maxCost uint64
task *servingTask
)
accept := func(reqID, reqCnt, maxCnt uint64) bool {
if reqCnt == 0 {
return false
}
if p.fcClient == nil || reqCnt > maxCnt {
return true
return false
}
bufValue, _ := p.fcClient.AcceptRequest()
cost := costs.baseCost + reqCnt*costs.reqCost
if cost > pm.server.defParams.BufLimit {
cost = pm.server.defParams.BufLimit
}
if cost > bufValue {
recharge := time.Duration((cost - bufValue) * 1000000 / pm.server.defParams.MinRecharge)
p.Log().Error("Request came too early", "recharge", common.PrettyDuration(recharge))
return true
maxCost = p.fcCosts.getCost(msg.Code, reqCnt)
if accepted, bufShort, servingPriority := p.fcClient.AcceptRequest(reqID, responseCount, maxCost); !accepted {
if bufShort > 0 {
p.Log().Error("Request came too early", "remaining", common.PrettyDuration(time.Duration(bufShort*1000000/p.fcParams.MinRecharge)))
}
return false
} else {
task = pm.servingQueue.newTask(servingPriority)
}
return task.start()
}
if msg.Size > ProtocolMaxMsgSize {
@ -389,6 +370,31 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
var deliverMsg *Msg
sendResponse := func(reqID, amount uint64, reply *reply, servingTime uint64) {
p.responseLock.Lock()
defer p.responseLock.Unlock()
var replySize uint32
if reply != nil {
replySize = reply.size()
}
var realCost uint64
if pm.server.costTracker != nil {
realCost = pm.server.costTracker.realCost(servingTime, msg.Size, replySize)
pm.server.costTracker.updateStats(msg.Code, amount, servingTime, realCost)
} else {
realCost = maxCost
}
bv := p.fcClient.RequestProcessed(reqID, responseCount, maxCost, realCost)
if reply != nil {
p.queueSend(func() {
if err := reply.send(bv); err != nil {
p.errCh <- err
}
})
}
}
// Handle the message depending on its contents
switch msg.Code {
case StatusMsg:
@ -399,16 +405,23 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
// Block header query, collect the requested headers and reply
case AnnounceMsg:
p.Log().Trace("Received announce message")
if p.announceType == announceTypeNone {
return errResp(ErrUnexpectedResponse, "")
}
var req announceData
if err := msg.Decode(&req); err != nil {
return errResp(ErrDecode, "%v: %v", msg, err)
}
update, size := req.Update.decode()
if p.rejectUpdate(size) {
return errResp(ErrRequestRejected, "")
}
p.updateFlowControl(update)
if req.Hash != (common.Hash{}) {
if p.announceType == announceTypeNone {
return errResp(ErrUnexpectedResponse, "")
}
if p.announceType == announceTypeSigned {
if err := req.checkSignature(p.ID()); err != nil {
if err := req.checkSignature(p.ID(), update); err != nil {
p.Log().Trace("Invalid announcement signature", "err", err)
return err
}
@ -419,6 +432,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if pm.fetcher != nil {
pm.fetcher.announce(p, &req)
}
}
case GetBlockHeadersMsg:
p.Log().Trace("Received block header request")
@ -432,10 +446,10 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
}
query := req.Query
if reject(query.Amount, MaxHeaderFetch) {
if !accept(req.ReqID, query.Amount, MaxHeaderFetch) {
return errResp(ErrRequestRejected, "")
}
go func() {
hashMode := query.Origin.Hash != (common.Hash{})
first := true
maxNonCanonical := uint64(100)
@ -447,11 +461,13 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
unknown bool
)
for !unknown && len(headers) < int(query.Amount) && bytes < softResponseLimit {
if !first && !task.waitOrStop() {
return
}
// Retrieve the next header satisfying the query
var origin *types.Header
if hashMode {
if first {
first = false
origin = pm.blockchain.GetHeaderByHash(query.Origin.Hash)
if origin != nil {
query.Origin.Number = origin.Number.Uint64()
@ -514,11 +530,10 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
// Number based traversal towards the leaf block
query.Origin.Number += query.Skip + 1
}
first = false
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + query.Amount*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, query.Amount, rcost)
return p.SendBlockHeaders(req.ReqID, bv, headers)
sendResponse(req.ReqID, query.Amount, p.ReplyBlockHeaders(req.ReqID, headers), task.done())
}()
case BlockHeadersMsg:
if pm.downloader == nil {
@ -534,7 +549,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if err := msg.Decode(&resp); err != nil {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
if pm.fetcher != nil && pm.fetcher.requestedID(resp.ReqID) {
pm.fetcher.deliverHeaders(p, resp.ReqID, resp.Headers)
} else {
@ -560,10 +575,14 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
bodies []rlp.RawValue
)
reqCnt := len(req.Hashes)
if reject(uint64(reqCnt), MaxBodyFetch) {
if !accept(req.ReqID, uint64(reqCnt), MaxBodyFetch) {
return errResp(ErrRequestRejected, "")
}
for _, hash := range req.Hashes {
go func() {
for i, hash := range req.Hashes {
if i != 0 && !task.waitOrStop() {
return
}
if bytes >= softResponseLimit {
break
}
@ -575,9 +594,8 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
}
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendBlockBodiesRLP(req.ReqID, bv, bodies)
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyBlockBodiesRLP(req.ReqID, bodies), task.done())
}()
case BlockBodiesMsg:
if pm.odr == nil {
@ -593,7 +611,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if err := msg.Decode(&resp); err != nil {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
deliverMsg = &Msg{
MsgType: MsgBlockBodies,
ReqID: resp.ReqID,
@ -616,10 +634,14 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
data [][]byte
)
reqCnt := len(req.Reqs)
if reject(uint64(reqCnt), MaxCodeFetch) {
if !accept(req.ReqID, uint64(reqCnt), MaxCodeFetch) {
return errResp(ErrRequestRejected, "")
}
for _, req := range req.Reqs {
go func() {
for i, req := range req.Reqs {
if i != 0 && !task.waitOrStop() {
return
}
// Retrieve the requested state entry, stopping if enough was found
if number := rawdb.ReadHeaderNumber(pm.chainDb, req.BHash); number != nil {
if header := rawdb.ReadHeader(pm.chainDb, req.BHash, *number); header != nil {
@ -640,9 +662,8 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
}
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendCode(req.ReqID, bv, data)
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyCode(req.ReqID, data), task.done())
}()
case CodeMsg:
if pm.odr == nil {
@ -658,7 +679,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if err := msg.Decode(&resp); err != nil {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
deliverMsg = &Msg{
MsgType: MsgCode,
ReqID: resp.ReqID,
@ -681,10 +702,14 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
receipts []rlp.RawValue
)
reqCnt := len(req.Hashes)
if reject(uint64(reqCnt), MaxReceiptFetch) {
if !accept(req.ReqID, uint64(reqCnt), MaxReceiptFetch) {
return errResp(ErrRequestRejected, "")
}
for _, hash := range req.Hashes {
go func() {
for i, hash := range req.Hashes {
if i != 0 && !task.waitOrStop() {
return
}
if bytes >= softResponseLimit {
break
}
@ -706,9 +731,8 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
bytes += len(encoded)
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendReceiptsRLP(req.ReqID, bv, receipts)
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyReceiptsRLP(req.ReqID, receipts), task.done())
}()
case ReceiptsMsg:
if pm.odr == nil {
@ -724,7 +748,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if err := msg.Decode(&resp); err != nil {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
deliverMsg = &Msg{
MsgType: MsgReceipts,
ReqID: resp.ReqID,
@ -747,10 +771,14 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
proofs proofsData
)
reqCnt := len(req.Reqs)
if reject(uint64(reqCnt), MaxProofsFetch) {
if !accept(req.ReqID, uint64(reqCnt), MaxProofsFetch) {
return errResp(ErrRequestRejected, "")
}
for _, req := range req.Reqs {
go func() {
for i, req := range req.Reqs {
if i != 0 && !task.waitOrStop() {
return
}
// Retrieve the requested state entry, stopping if enough was found
if number := rawdb.ReadHeaderNumber(pm.chainDb, req.BHash); number != nil {
if header := rawdb.ReadHeader(pm.chainDb, req.BHash, *number); header != nil {
@ -780,9 +808,8 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
}
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendProofs(req.ReqID, bv, proofs)
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyProofs(req.ReqID, proofs), task.done())
}()
case GetProofsV2Msg:
p.Log().Trace("Received les/2 proofs request")
@ -801,13 +828,17 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
root common.Hash
)
reqCnt := len(req.Reqs)
if reject(uint64(reqCnt), MaxProofsFetch) {
if !accept(req.ReqID, uint64(reqCnt), MaxProofsFetch) {
return errResp(ErrRequestRejected, "")
}
go func() {
nodes := light.NewNodeSet()
for _, req := range req.Reqs {
for i, req := range req.Reqs {
if i != 0 && !task.waitOrStop() {
return
}
// Look up the state belonging to the request
if statedb == nil || req.BHash != lastBHash {
statedb, root, lastBHash = nil, common.Hash{}, req.BHash
@ -842,9 +873,8 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
break
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendProofsV2(req.ReqID, bv, nodes.NodeList())
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyProofsV2(req.ReqID, nodes.NodeList()), task.done())
}()
case ProofsV1Msg:
if pm.odr == nil {
@ -860,7 +890,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if err := msg.Decode(&resp); err != nil {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
deliverMsg = &Msg{
MsgType: MsgProofsV1,
ReqID: resp.ReqID,
@ -881,7 +911,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if err := msg.Decode(&resp); err != nil {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
deliverMsg = &Msg{
MsgType: MsgProofsV2,
ReqID: resp.ReqID,
@ -904,11 +934,15 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
proofs []ChtResp
)
reqCnt := len(req.Reqs)
if reject(uint64(reqCnt), MaxHelperTrieProofsFetch) {
if !accept(req.ReqID, uint64(reqCnt), MaxHelperTrieProofsFetch) {
return errResp(ErrRequestRejected, "")
}
go func() {
trieDb := trie.NewDatabase(ethdb.NewTable(pm.chainDb, light.ChtTablePrefix))
for _, req := range req.Reqs {
for i, req := range req.Reqs {
if i != 0 && !task.waitOrStop() {
return
}
if header := pm.blockchain.GetHeaderByNumber(req.BlockNum); header != nil {
sectionHead := rawdb.ReadCanonicalHash(pm.chainDb, req.ChtNum*pm.iConfig.ChtSize-1)
if root := light.GetChtRoot(pm.chainDb, req.ChtNum-1, sectionHead); root != (common.Hash{}) {
@ -929,9 +963,8 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
}
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendHeaderProofs(req.ReqID, bv, proofs)
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyHeaderProofs(req.ReqID, proofs), task.done())
}()
case GetHelperTrieProofsMsg:
p.Log().Trace("Received helper trie proof request")
@ -949,9 +982,10 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
auxData [][]byte
)
reqCnt := len(req.Reqs)
if reject(uint64(reqCnt), MaxHelperTrieProofsFetch) {
if !accept(req.ReqID, uint64(reqCnt), MaxHelperTrieProofsFetch) {
return errResp(ErrRequestRejected, "")
}
go func() {
var (
lastIdx uint64
@ -960,7 +994,10 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
auxTrie *trie.Trie
)
nodes := light.NewNodeSet()
for _, req := range req.Reqs {
for i, req := range req.Reqs {
if i != 0 && !task.waitOrStop() {
return
}
if auxTrie == nil || req.Type != lastType || req.TrieIdx != lastIdx {
auxTrie, lastType, lastIdx = nil, req.Type, req.TrieIdx
@ -990,9 +1027,8 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
break
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendHelperTrieProofs(req.ReqID, bv, HelperTrieResps{Proofs: nodes.NodeList(), AuxData: auxData})
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyHelperTrieProofs(req.ReqID, HelperTrieResps{Proofs: nodes.NodeList(), AuxData: auxData}), task.done())
}()
case HeaderProofsMsg:
if pm.odr == nil {
@ -1007,7 +1043,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
if err := msg.Decode(&resp); err != nil {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
deliverMsg = &Msg{
MsgType: MsgHeaderProofs,
ReqID: resp.ReqID,
@ -1028,7 +1064,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
deliverMsg = &Msg{
MsgType: MsgHelperTrieProofs,
ReqID: resp.ReqID,
@ -1045,13 +1081,18 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
reqCnt := len(txs)
if reject(uint64(reqCnt), MaxTxSend) {
if !accept(0, uint64(reqCnt), MaxTxSend) {
return errResp(ErrRequestRejected, "")
}
pm.txpool.AddRemotes(txs)
_, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
go func() {
for i, tx := range txs {
if i != 0 && !task.waitOrStop() {
return
}
pm.txpool.AddRemotes([]*types.Transaction{tx})
}
sendResponse(0, uint64(reqCnt), nil, task.done())
}()
case SendTxV2Msg:
if pm.txpool == nil {
@ -1066,29 +1107,27 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
reqCnt := len(req.Txs)
if reject(uint64(reqCnt), MaxTxSend) {
if !accept(req.ReqID, uint64(reqCnt), MaxTxSend) {
return errResp(ErrRequestRejected, "")
}
hashes := make([]common.Hash, len(req.Txs))
go func() {
stats := make([]txStatus, len(req.Txs))
for i, tx := range req.Txs {
hashes[i] = tx.Hash()
if i != 0 && !task.waitOrStop() {
return
}
stats := pm.txStatus(hashes)
for i, stat := range stats {
if stat.Status == core.TxStatusUnknown {
if errs := pm.txpool.AddRemotes([]*types.Transaction{req.Txs[i]}); errs[0] != nil {
hash := tx.Hash()
stats[i] = pm.txStatus(hash)
if stats[i].Status == core.TxStatusUnknown {
if errs := pm.txpool.AddRemotes([]*types.Transaction{tx}); errs[0] != nil {
stats[i].Error = errs[0].Error()
continue
}
stats[i] = pm.txStatus([]common.Hash{hashes[i]})[0]
stats[i] = pm.txStatus(hash)
}
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendTxStatus(req.ReqID, bv, stats)
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyTxStatus(req.ReqID, stats), task.done())
}()
case GetTxStatusMsg:
if pm.txpool == nil {
@ -1103,13 +1142,19 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
reqCnt := len(req.Hashes)
if reject(uint64(reqCnt), MaxTxStatus) {
if !accept(req.ReqID, uint64(reqCnt), MaxTxStatus) {
return errResp(ErrRequestRejected, "")
}
bv, rcost := p.fcClient.RequestProcessed(costs.baseCost + uint64(reqCnt)*costs.reqCost)
pm.server.fcCostStats.update(msg.Code, uint64(reqCnt), rcost)
return p.SendTxStatus(req.ReqID, bv, pm.txStatus(req.Hashes))
go func() {
stats := make([]txStatus, len(req.Hashes))
for i, hash := range req.Hashes {
if i != 0 && !task.waitOrStop() {
return
}
stats[i] = pm.txStatus(hash)
}
sendResponse(req.ReqID, uint64(reqCnt), p.ReplyTxStatus(req.ReqID, stats), task.done())
}()
case TxStatusMsg:
if pm.odr == nil {
@ -1125,7 +1170,7 @@ func (pm *ProtocolManager) handleMsg(p *peer) error {
return errResp(ErrDecode, "msg %v: %v", msg, err)
}
p.fcServer.GotReply(resp.ReqID, resp.BV)
p.fcServer.ReceivedReply(resp.ReqID, resp.BV)
default:
p.Log().Trace("Received unknown message", "code", msg.Code)
@ -1185,21 +1230,17 @@ func (pm *ProtocolManager) getHelperTrieAuxData(req HelperTrieReq) []byte {
return nil
}
func (pm *ProtocolManager) txStatus(hashes []common.Hash) []txStatus {
stats := make([]txStatus, len(hashes))
for i, stat := range pm.txpool.Status(hashes) {
// Save the status we've got from the transaction pool
stats[i].Status = stat
func (pm *ProtocolManager) txStatus(hash common.Hash) txStatus {
var stat txStatus
stat.Status = pm.txpool.Status([]common.Hash{hash})[0]
// If the transaction is unknown to the pool, try looking it up locally
if stat == core.TxStatusUnknown {
if tx, blockHash, blockNumber, txIndex := rawdb.ReadTransaction(pm.chainDb, hashes[i]); tx != nil {
stats[i].Status = core.TxStatusIncluded
stats[i].Lookup = &rawdb.LegacyTxLookupEntry{BlockHash: blockHash, BlockIndex: blockNumber, Index: txIndex}
if stat.Status == core.TxStatusUnknown {
if tx, blockHash, blockNumber, txIndex := rawdb.ReadTransaction(pm.chainDb, hash); tx != nil {
stat.Status = core.TxStatusIncluded
stat.Lookup = &rawdb.LegacyTxLookupEntry{BlockHash: blockHash, BlockIndex: blockNumber, Index: txIndex}
}
}
}
return stats
return stat
}
// isULCEnabled returns true if we can use ULC
@ -1235,7 +1276,7 @@ func (pc *peerConnection) RequestHeadersByHash(origin common.Hash, amount int, s
request: func(dp distPeer) func() {
peer := dp.(*peer)
cost := peer.GetRequestCost(GetBlockHeadersMsg, amount)
peer.fcServer.QueueRequest(reqID, cost)
peer.fcServer.QueuedRequest(reqID, cost)
return func() { peer.RequestHeadersByHash(reqID, cost, origin, amount, skip, reverse) }
},
}
@ -1259,7 +1300,7 @@ func (pc *peerConnection) RequestHeadersByNumber(origin uint64, amount int, skip
request: func(dp distPeer) func() {
peer := dp.(*peer)
cost := peer.GetRequestCost(GetBlockHeadersMsg, amount)
peer.fcServer.QueueRequest(reqID, cost)
peer.fcServer.QueuedRequest(reqID, cost)
return func() { peer.RequestHeadersByNumber(reqID, cost, origin, amount, skip, reverse) }
},
}

View File

@ -27,6 +27,7 @@ import (
"time"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/consensus/ethash"
"github.com/ethereum/go-ethereum/core"
"github.com/ethereum/go-ethereum/core/types"
@ -133,16 +134,6 @@ func testIndexers(db ethdb.Database, odr light.OdrBackend, iConfig *light.Indexe
return chtIndexer, bloomIndexer, bloomTrieIndexer
}
func testRCL() RequestCostList {
cl := make(RequestCostList, len(reqList))
for i, code := range reqList {
cl[i].MsgCode = code
cl[i].BaseCost = 0
cl[i].ReqCost = 0
}
return cl
}
// newTestProtocolManager creates a new protocol manager for testing purposes,
// with the given number of blocks already known, potential notification
// channels for different events and relative chain indexers array.
@ -183,14 +174,14 @@ func newTestProtocolManager(lightSync bool, blocks int, generator func(int, *cor
if !lightSync {
srv := &LesServer{lesCommons: lesCommons{protocolManager: pm}}
pm.server = srv
pm.servingQueue.setThreads(4)
srv.defParams = &flowcontrol.ServerParams{
srv.defParams = flowcontrol.ServerParams{
BufLimit: testBufLimit,
MinRecharge: 1,
}
srv.fcManager = flowcontrol.NewClientManager(50, 10, 1000000000)
srv.fcCostStats = newCostStats(nil)
srv.fcManager = flowcontrol.NewClientManager(nil, &mclock.System{})
}
pm.Start(1000)
return pm, nil
@ -304,7 +295,7 @@ func (p *testPeer) handshake(t *testing.T, td *big.Int, head common.Hash, headNu
expList = expList.add("txRelay", nil)
expList = expList.add("flowControl/BL", testBufLimit)
expList = expList.add("flowControl/MRR", uint64(1))
expList = expList.add("flowControl/MRC", testRCL())
expList = expList.add("flowControl/MRC", testCostList())
if err := p2p.ExpectMsg(p.app, StatusMsg, expList); err != nil {
t.Fatalf("status recv: %v", err)
@ -313,7 +304,7 @@ func (p *testPeer) handshake(t *testing.T, td *big.Int, head common.Hash, headNu
t.Fatalf("status send: %v", err)
}
p.fcServerParams = &flowcontrol.ServerParams{
p.fcParams = flowcontrol.ServerParams{
BufLimit: testBufLimit,
MinRecharge: 1,
}
@ -375,7 +366,7 @@ func newClientServerEnv(t *testing.T, blocks int, protocol int, waitIndexers fun
db, ldb := ethdb.NewMemDatabase(), ethdb.NewMemDatabase()
peers, lPeers := newPeerSet(), newPeerSet()
dist := newRequestDistributor(lPeers, make(chan struct{}))
dist := newRequestDistributor(lPeers, make(chan struct{}), &mclock.System{})
rm := newRetrieveManager(lPeers, dist, nil)
odr := NewLesOdr(ldb, light.TestClientIndexerConfig, rm)

View File

@ -117,7 +117,7 @@ func (odr *LesOdr) Retrieve(ctx context.Context, req light.OdrRequest) (err erro
request: func(dp distPeer) func() {
p := dp.(*peer)
cost := lreq.GetCost(p)
p.fcServer.QueueRequest(reqID, cost)
p.fcServer.QueuedRequest(reqID, cost)
return func() { lreq.Request(reqID, p) }
},
}

View File

@ -14,8 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package light implements on-demand retrieval capable state and chain objects
// for the Ethereum Light Client.
package les
import (

View File

@ -14,7 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (
@ -25,6 +24,7 @@ import (
"time"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/eth"
"github.com/ethereum/go-ethereum/les/flowcontrol"
@ -42,6 +42,17 @@ var (
const maxResponseErrors = 50 // number of invalid responses tolerated (makes the protocol less brittle but still avoids spam)
// capacity limitation for parameter updates
const (
allowedUpdateBytes = 100000 // initial/maximum allowed update size
allowedUpdateRate = time.Millisecond * 10 // time constant for recharging one byte of allowance
)
// if the total encoded size of a sent transaction batch is over txSizeCostLimit
// per transaction then the request cost is calculated as proportional to the
// encoded size instead of the transaction count
const txSizeCostLimit = 0x10000
const (
announceTypeNone = iota
announceTypeSimple
@ -63,16 +74,23 @@ type peer struct {
headInfo *announceData
lock sync.RWMutex
announceChn chan announceData
sendQueue *execQueue
errCh chan error
// responseLock ensures that responses are queued in the same order as
// RequestProcessed is called
responseLock sync.Mutex
responseCount uint64
poolEntry *poolEntry
hasBlock func(common.Hash, uint64, bool) bool
responseErrors int
updateCounter uint64
updateTime mclock.AbsTime
fcClient *flowcontrol.ClientNode // nil if the peer is server only
fcServer *flowcontrol.ServerNode // nil if the peer is client only
fcServerParams *flowcontrol.ServerParams
fcParams flowcontrol.ServerParams
fcCosts requestCostTable
isTrusted bool
@ -87,12 +105,32 @@ func newPeer(version int, network uint64, isTrusted bool, p *p2p.Peer, rw p2p.Ms
rw: rw,
version: version,
network: network,
id: fmt.Sprintf("%x", id[:8]),
announceChn: make(chan announceData, 20),
id: fmt.Sprintf("%x", id),
isTrusted: isTrusted,
}
}
// rejectUpdate returns true if a parameter update has to be rejected because
// the size and/or rate of updates exceed the capacity limitation
func (p *peer) rejectUpdate(size uint64) bool {
now := mclock.Now()
if p.updateCounter == 0 {
p.updateTime = now
} else {
dt := now - p.updateTime
r := uint64(dt / mclock.AbsTime(allowedUpdateRate))
if p.updateCounter > r {
p.updateCounter -= r
p.updateTime += mclock.AbsTime(allowedUpdateRate * time.Duration(r))
} else {
p.updateCounter = 0
p.updateTime = now
}
}
p.updateCounter += size
return p.updateCounter > allowedUpdateBytes
}
func (p *peer) canQueue() bool {
return p.sendQueue.canQueue()
}
@ -147,6 +185,20 @@ func (p *peer) waitBefore(maxCost uint64) (time.Duration, float64) {
return p.fcServer.CanSend(maxCost)
}
// updateCapacity updates the request serving capacity assigned to a given client
// and also sends an announcement about the updated flow control parameters
func (p *peer) updateCapacity(cap uint64) {
p.responseLock.Lock()
defer p.responseLock.Unlock()
p.fcParams = flowcontrol.ServerParams{MinRecharge: cap, BufLimit: cap * bufLimitRatio}
p.fcClient.UpdateParams(p.fcParams)
var kvList keyValueList
kvList = kvList.add("flowControl/MRR", cap)
kvList = kvList.add("flowControl/BL", cap*bufLimitRatio)
p.queueSend(func() { p.SendAnnounce(announceData{Update: kvList}) })
}
func sendRequest(w p2p.MsgWriter, msgcode, reqID, cost uint64, data interface{}) error {
type req struct {
ReqID uint64
@ -155,12 +207,27 @@ func sendRequest(w p2p.MsgWriter, msgcode, reqID, cost uint64, data interface{})
return p2p.Send(w, msgcode, req{reqID, data})
}
func sendResponse(w p2p.MsgWriter, msgcode, reqID, bv uint64, data interface{}) error {
// reply struct represents a reply with the actual data already RLP encoded and
// only the bv (buffer value) missing. This allows the serving mechanism to
// calculate the bv value which depends on the data size before sending the reply.
type reply struct {
w p2p.MsgWriter
msgcode, reqID uint64
data rlp.RawValue
}
// send sends the reply with the calculated buffer value
func (r *reply) send(bv uint64) error {
type resp struct {
ReqID, BV uint64
Data interface{}
Data rlp.RawValue
}
return p2p.Send(w, msgcode, resp{reqID, bv, data})
return p2p.Send(r.w, r.msgcode, resp{r.reqID, bv, r.data})
}
// size returns the RLP encoded size of the message data
func (r *reply) size() uint32 {
return uint32(len(r.data))
}
func (p *peer) GetRequestCost(msgcode uint64, amount int) uint64 {
@ -168,8 +235,34 @@ func (p *peer) GetRequestCost(msgcode uint64, amount int) uint64 {
defer p.lock.RUnlock()
cost := p.fcCosts[msgcode].baseCost + p.fcCosts[msgcode].reqCost*uint64(amount)
if cost > p.fcServerParams.BufLimit {
cost = p.fcServerParams.BufLimit
if cost > p.fcParams.BufLimit {
cost = p.fcParams.BufLimit
}
return cost
}
func (p *peer) GetTxRelayCost(amount, size int) uint64 {
p.lock.RLock()
defer p.lock.RUnlock()
var msgcode uint64
switch p.version {
case lpv1:
msgcode = SendTxMsg
case lpv2:
msgcode = SendTxV2Msg
default:
panic(nil)
}
cost := p.fcCosts[msgcode].baseCost + p.fcCosts[msgcode].reqCost*uint64(amount)
sizeCost := p.fcCosts[msgcode].baseCost + p.fcCosts[msgcode].reqCost*uint64(size)/txSizeCostLimit
if sizeCost > cost {
cost = sizeCost
}
if cost > p.fcParams.BufLimit {
cost = p.fcParams.BufLimit
}
return cost
}
@ -188,52 +281,61 @@ func (p *peer) SendAnnounce(request announceData) error {
return p2p.Send(p.rw, AnnounceMsg, request)
}
// SendBlockHeaders sends a batch of block headers to the remote peer.
func (p *peer) SendBlockHeaders(reqID, bv uint64, headers []*types.Header) error {
return sendResponse(p.rw, BlockHeadersMsg, reqID, bv, headers)
// ReplyBlockHeaders creates a reply with a batch of block headers
func (p *peer) ReplyBlockHeaders(reqID uint64, headers []*types.Header) *reply {
data, _ := rlp.EncodeToBytes(headers)
return &reply{p.rw, BlockHeadersMsg, reqID, data}
}
// SendBlockBodiesRLP sends a batch of block contents to the remote peer from
// ReplyBlockBodiesRLP creates a reply with a batch of block contents from
// an already RLP encoded format.
func (p *peer) SendBlockBodiesRLP(reqID, bv uint64, bodies []rlp.RawValue) error {
return sendResponse(p.rw, BlockBodiesMsg, reqID, bv, bodies)
func (p *peer) ReplyBlockBodiesRLP(reqID uint64, bodies []rlp.RawValue) *reply {
data, _ := rlp.EncodeToBytes(bodies)
return &reply{p.rw, BlockBodiesMsg, reqID, data}
}
// SendCodeRLP sends a batch of arbitrary internal data, corresponding to the
// ReplyCode creates a reply with a batch of arbitrary internal data, corresponding to the
// hashes requested.
func (p *peer) SendCode(reqID, bv uint64, data [][]byte) error {
return sendResponse(p.rw, CodeMsg, reqID, bv, data)
func (p *peer) ReplyCode(reqID uint64, codes [][]byte) *reply {
data, _ := rlp.EncodeToBytes(codes)
return &reply{p.rw, CodeMsg, reqID, data}
}
// SendReceiptsRLP sends a batch of transaction receipts, corresponding to the
// ReplyReceiptsRLP creates a reply with a batch of transaction receipts, corresponding to the
// ones requested from an already RLP encoded format.
func (p *peer) SendReceiptsRLP(reqID, bv uint64, receipts []rlp.RawValue) error {
return sendResponse(p.rw, ReceiptsMsg, reqID, bv, receipts)
func (p *peer) ReplyReceiptsRLP(reqID uint64, receipts []rlp.RawValue) *reply {
data, _ := rlp.EncodeToBytes(receipts)
return &reply{p.rw, ReceiptsMsg, reqID, data}
}
// SendProofs sends a batch of legacy LES/1 merkle proofs, corresponding to the ones requested.
func (p *peer) SendProofs(reqID, bv uint64, proofs proofsData) error {
return sendResponse(p.rw, ProofsV1Msg, reqID, bv, proofs)
// ReplyProofs creates a reply with a batch of legacy LES/1 merkle proofs, corresponding to the ones requested.
func (p *peer) ReplyProofs(reqID uint64, proofs proofsData) *reply {
data, _ := rlp.EncodeToBytes(proofs)
return &reply{p.rw, ProofsV1Msg, reqID, data}
}
// SendProofsV2 sends a batch of merkle proofs, corresponding to the ones requested.
func (p *peer) SendProofsV2(reqID, bv uint64, proofs light.NodeList) error {
return sendResponse(p.rw, ProofsV2Msg, reqID, bv, proofs)
// ReplyProofsV2 creates a reply with a batch of merkle proofs, corresponding to the ones requested.
func (p *peer) ReplyProofsV2(reqID uint64, proofs light.NodeList) *reply {
data, _ := rlp.EncodeToBytes(proofs)
return &reply{p.rw, ProofsV2Msg, reqID, data}
}
// SendHeaderProofs sends a batch of legacy LES/1 header proofs, corresponding to the ones requested.
func (p *peer) SendHeaderProofs(reqID, bv uint64, proofs []ChtResp) error {
return sendResponse(p.rw, HeaderProofsMsg, reqID, bv, proofs)
// ReplyHeaderProofs creates a reply with a batch of legacy LES/1 header proofs, corresponding to the ones requested.
func (p *peer) ReplyHeaderProofs(reqID uint64, proofs []ChtResp) *reply {
data, _ := rlp.EncodeToBytes(proofs)
return &reply{p.rw, HeaderProofsMsg, reqID, data}
}
// SendHelperTrieProofs sends a batch of HelperTrie proofs, corresponding to the ones requested.
func (p *peer) SendHelperTrieProofs(reqID, bv uint64, resp HelperTrieResps) error {
return sendResponse(p.rw, HelperTrieProofsMsg, reqID, bv, resp)
// ReplyHelperTrieProofs creates a reply with a batch of HelperTrie proofs, corresponding to the ones requested.
func (p *peer) ReplyHelperTrieProofs(reqID uint64, resp HelperTrieResps) *reply {
data, _ := rlp.EncodeToBytes(resp)
return &reply{p.rw, HelperTrieProofsMsg, reqID, data}
}
// SendTxStatus sends a batch of transaction status records, corresponding to the ones requested.
func (p *peer) SendTxStatus(reqID, bv uint64, stats []txStatus) error {
return sendResponse(p.rw, TxStatusMsg, reqID, bv, stats)
// ReplyTxStatus creates a reply with a batch of transaction status records, corresponding to the ones requested.
func (p *peer) ReplyTxStatus(reqID uint64, stats []txStatus) *reply {
data, _ := rlp.EncodeToBytes(stats)
return &reply{p.rw, TxStatusMsg, reqID, data}
}
// RequestHeadersByHash fetches a batch of blocks' headers corresponding to the
@ -311,9 +413,9 @@ func (p *peer) RequestTxStatus(reqID, cost uint64, txHashes []common.Hash) error
return sendRequest(p.rw, GetTxStatusMsg, reqID, cost, txHashes)
}
// SendTxStatus sends a batch of transactions to be added to the remote transaction pool.
func (p *peer) SendTxs(reqID, cost uint64, txs types.Transactions) error {
p.Log().Debug("Fetching batch of transactions", "count", len(txs))
// SendTxStatus creates a reply with a batch of transactions to be added to the remote transaction pool.
func (p *peer) SendTxs(reqID, cost uint64, txs rlp.RawValue) error {
p.Log().Debug("Sending batch of transactions", "size", len(txs))
switch p.version {
case lpv1:
return p2p.Send(p.rw, SendTxMsg, txs) // old message format does not include reqID
@ -344,12 +446,14 @@ func (l keyValueList) add(key string, val interface{}) keyValueList {
return append(l, entry)
}
func (l keyValueList) decode() keyValueMap {
func (l keyValueList) decode() (keyValueMap, uint64) {
m := make(keyValueMap)
var size uint64
for _, entry := range l {
m[entry.Key] = entry.Value
size += uint64(len(entry.Key)) + uint64(len(entry.Value)) + 8
}
return m
return m, size
}
func (m keyValueMap) get(key string, val interface{}) error {
@ -414,9 +518,15 @@ func (p *peer) Handshake(td *big.Int, head common.Hash, headNum uint64, genesis
}
send = send.add("flowControl/BL", server.defParams.BufLimit)
send = send.add("flowControl/MRR", server.defParams.MinRecharge)
list := server.fcCostStats.getCurrentList()
send = send.add("flowControl/MRC", list)
p.fcCosts = list.decode()
var costList RequestCostList
if server.costTracker != nil {
costList = server.costTracker.makeCostList()
} else {
costList = testCostList()
}
send = send.add("flowControl/MRC", costList)
p.fcCosts = costList.decode()
p.fcParams = server.defParams
} else {
//on client node
p.announceType = announceTypeSimple
@ -430,8 +540,10 @@ func (p *peer) Handshake(td *big.Int, head common.Hash, headNum uint64, genesis
if err != nil {
return err
}
recv := recvList.decode()
recv, size := recvList.decode()
if p.rejectUpdate(size) {
return errResp(ErrRequestRejected, "")
}
var rGenesis, rHash common.Hash
var rVersion, rNetwork, rNum uint64
@ -492,7 +604,7 @@ func (p *peer) Handshake(td *big.Int, head common.Hash, headNum uint64, genesis
return errResp(ErrUselessPeer, "peer cannot serve requests")
}
params := &flowcontrol.ServerParams{}
var params flowcontrol.ServerParams
if err := recv.get("flowControl/BL", &params.BufLimit); err != nil {
return err
}
@ -503,14 +615,38 @@ func (p *peer) Handshake(td *big.Int, head common.Hash, headNum uint64, genesis
if err := recv.get("flowControl/MRC", &MRC); err != nil {
return err
}
p.fcServerParams = params
p.fcServer = flowcontrol.NewServerNode(params)
p.fcParams = params
p.fcServer = flowcontrol.NewServerNode(params, &mclock.System{})
p.fcCosts = MRC.decode()
}
p.headInfo = &announceData{Td: rTd, Hash: rHash, Number: rNum}
return nil
}
// updateFlowControl updates the flow control parameters belonging to the server
// node if the announced key/value set contains relevant fields
func (p *peer) updateFlowControl(update keyValueMap) {
if p.fcServer == nil {
return
}
params := p.fcParams
updateParams := false
if update.get("flowControl/BL", &params.BufLimit) == nil {
updateParams = true
}
if update.get("flowControl/MRR", &params.MinRecharge) == nil {
updateParams = true
}
if updateParams {
p.fcParams = params
p.fcServer.UpdateParams(params)
}
var MRC RequestCostList
if update.get("flowControl/MRC", &MRC) == nil {
p.fcCosts = MRC.decode()
}
}
// String implements fmt.Stringer.
func (p *peer) String() string {
return fmt.Sprintf("Peer %s [%s]", p.id,

View File

@ -5,6 +5,7 @@ import (
"testing"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/les/flowcontrol"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/rlp"
@ -34,7 +35,7 @@ func TestPeerHandshakeSetAnnounceTypeToAnnounceTypeSignedForTrustedPeer(t *testi
rw: &rwStub{
WriteHook: func(recvList keyValueList) {
//checking that ulc sends to peer allowedRequests=onlyAnnounceRequests and announceType = announceTypeSigned
recv := recvList.decode()
recv, _ := recvList.decode()
var reqType uint64
err := recv.get("announceType", &reqType)
@ -79,7 +80,7 @@ func TestPeerHandshakeAnnounceTypeSignedForTrustedPeersPeerNotInTrusted(t *testi
rw: &rwStub{
WriteHook: func(recvList keyValueList) {
//checking that ulc sends to peer allowedRequests=noRequests and announceType != announceTypeSigned
recv := recvList.decode()
recv, _ := recvList.decode()
var reqType uint64
err := recv.get("announceType", &reqType)
@ -237,17 +238,11 @@ func TestPeerHandshakeClientReturnErrorOnUselessPeer(t *testing.T) {
func generateLesServer() *LesServer {
s := &LesServer{
defParams: &flowcontrol.ServerParams{
defParams: flowcontrol.ServerParams{
BufLimit: uint64(300000000),
MinRecharge: uint64(50000),
},
fcManager: flowcontrol.NewClientManager(1, 2, 3),
fcCostStats: &requestCostStats{
stats: make(map[uint64]*linReg, len(reqList)),
},
}
for _, code := range reqList {
s.fcCostStats.stats[code] = &linReg{cnt: 100}
fcManager: flowcontrol.NewClientManager(nil, &mclock.System{}),
}
return s
}

View File

@ -14,7 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (
@ -81,6 +80,25 @@ const (
TxStatusMsg = 0x15
)
type requestInfo struct {
name string
maxCount uint64
}
var requests = map[uint64]requestInfo{
GetBlockHeadersMsg: {"GetBlockHeaders", MaxHeaderFetch},
GetBlockBodiesMsg: {"GetBlockBodies", MaxBodyFetch},
GetReceiptsMsg: {"GetReceipts", MaxReceiptFetch},
GetProofsV1Msg: {"GetProofsV1", MaxProofsFetch},
GetCodeMsg: {"GetCode", MaxCodeFetch},
SendTxMsg: {"SendTx", MaxTxSend},
GetHeaderProofsMsg: {"GetHeaderProofs", MaxHelperTrieProofsFetch},
GetProofsV2Msg: {"GetProofsV2", MaxProofsFetch},
GetHelperTrieProofsMsg: {"GetHelperTrieProofs", MaxHelperTrieProofsFetch},
SendTxV2Msg: {"SendTxV2", MaxTxSend},
GetTxStatusMsg: {"GetTxStatus", MaxTxStatus},
}
type errCode int
const (
@ -146,9 +164,9 @@ func (a *announceData) sign(privKey *ecdsa.PrivateKey) {
}
// checkSignature verifies if the block announcement has a valid signature by the given pubKey
func (a *announceData) checkSignature(id enode.ID) error {
func (a *announceData) checkSignature(id enode.ID, update keyValueMap) error {
var sig []byte
if err := a.Update.decode().get("sign", &sig); err != nil {
if err := update.get("sign", &sig); err != nil {
return err
}
rlp, _ := rlp.EncodeToBytes(announceBlock{a.Hash, a.Number, a.Td})

View File

@ -14,7 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (

View File

@ -14,8 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package light implements on-demand retrieval capable state and chain objects
// for the Ethereum Light Client.
package les
import (

View File

@ -14,40 +14,46 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (
"crypto/ecdsa"
"encoding/binary"
"math"
"sync"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/core"
"github.com/ethereum/go-ethereum/core/rawdb"
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/eth"
"github.com/ethereum/go-ethereum/ethdb"
"github.com/ethereum/go-ethereum/les/flowcontrol"
"github.com/ethereum/go-ethereum/light"
"github.com/ethereum/go-ethereum/log"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/discv5"
"github.com/ethereum/go-ethereum/params"
"github.com/ethereum/go-ethereum/rlp"
"github.com/ethereum/go-ethereum/rpc"
)
const bufLimitRatio = 6000 // fixed bufLimit/MRR ratio
type LesServer struct {
lesCommons
fcManager *flowcontrol.ClientManager // nil if our node is client only
fcCostStats *requestCostStats
defParams *flowcontrol.ServerParams
costTracker *costTracker
defParams flowcontrol.ServerParams
lesTopics []discv5.Topic
privateKey *ecdsa.PrivateKey
quitSync chan struct{}
onlyAnnounce bool
thcNormal, thcBlockProcessing int // serving thread count for normal operation and block processing mode
maxPeers int
freeClientCap uint64
freeClientPool *freeClientPool
priorityClientPool *priorityClientPool
}
func NewLesServer(eth *eth.Ethereum, config *eth.Config) (*LesServer, error) {
@ -87,12 +93,20 @@ func NewLesServer(eth *eth.Ethereum, config *eth.Config) (*LesServer, error) {
bloomTrieIndexer: light.NewBloomTrieIndexer(eth.ChainDb(), nil, params.BloomBitsBlocks, params.BloomTrieFrequency),
protocolManager: pm,
},
costTracker: newCostTracker(eth.ChainDb(), config),
quitSync: quitSync,
lesTopics: lesTopics,
onlyAnnounce: config.OnlyAnnounce,
}
logger := log.New()
pm.server = srv
srv.thcNormal = config.LightServ * 4 / 100
if srv.thcNormal < 4 {
srv.thcNormal = 4
}
srv.thcBlockProcessing = config.LightServ/100 + 1
srv.fcManager = flowcontrol.NewClientManager(nil, &mclock.System{})
chtV1SectionCount, _, _ := srv.chtIndexer.Sections() // indexer still uses LES/1 4k section size for backwards server compatibility
chtV2SectionCount := chtV1SectionCount / (params.CHTFrequencyClient / params.CHTFrequencyServer)
@ -114,23 +128,92 @@ func NewLesServer(eth *eth.Ethereum, config *eth.Config) (*LesServer, error) {
}
srv.chtIndexer.Start(eth.BlockChain())
pm.server = srv
srv.defParams = &flowcontrol.ServerParams{
BufLimit: 300000000,
MinRecharge: 50000,
}
srv.fcManager = flowcontrol.NewClientManager(uint64(config.LightServ), 10, 1000000000)
srv.fcCostStats = newCostStats(eth.ChainDb())
return srv, nil
}
func (s *LesServer) APIs() []rpc.API {
return []rpc.API{
{
Namespace: "les",
Version: "1.0",
Service: NewPrivateLightServerAPI(s),
Public: false,
},
}
}
// startEventLoop starts an event handler loop that updates the recharge curve of
// the client manager and adjusts the client pool's size according to the total
// capacity updates coming from the client manager
func (s *LesServer) startEventLoop() {
s.protocolManager.wg.Add(1)
var processing bool
blockProcFeed := make(chan bool, 100)
s.protocolManager.blockchain.(*core.BlockChain).SubscribeBlockProcessingEvent(blockProcFeed)
totalRechargeCh := make(chan uint64, 100)
totalRecharge := s.costTracker.subscribeTotalRecharge(totalRechargeCh)
totalCapacityCh := make(chan uint64, 100)
updateRecharge := func() {
if processing {
s.protocolManager.servingQueue.setThreads(s.thcBlockProcessing)
s.fcManager.SetRechargeCurve(flowcontrol.PieceWiseLinear{{0, 0}, {totalRecharge, totalRecharge}})
} else {
s.protocolManager.servingQueue.setThreads(s.thcNormal)
s.fcManager.SetRechargeCurve(flowcontrol.PieceWiseLinear{{0, 0}, {totalRecharge / 10, totalRecharge}, {totalRecharge, totalRecharge}})
}
}
updateRecharge()
totalCapacity := s.fcManager.SubscribeTotalCapacity(totalCapacityCh)
s.priorityClientPool.setLimits(s.maxPeers, totalCapacity)
go func() {
for {
select {
case processing = <-blockProcFeed:
updateRecharge()
case totalRecharge = <-totalRechargeCh:
updateRecharge()
case totalCapacity = <-totalCapacityCh:
s.priorityClientPool.setLimits(s.maxPeers, totalCapacity)
case <-s.protocolManager.quitSync:
s.protocolManager.wg.Done()
return
}
}
}()
}
func (s *LesServer) Protocols() []p2p.Protocol {
return s.makeProtocols(ServerProtocolVersions)
}
// Start starts the LES server
func (s *LesServer) Start(srvr *p2p.Server) {
s.maxPeers = s.config.LightPeers
totalRecharge := s.costTracker.totalRecharge()
if s.maxPeers > 0 {
s.freeClientCap = minCapacity //totalRecharge / uint64(s.maxPeers)
if s.freeClientCap < minCapacity {
s.freeClientCap = minCapacity
}
if s.freeClientCap > 0 {
s.defParams = flowcontrol.ServerParams{
BufLimit: s.freeClientCap * bufLimitRatio,
MinRecharge: s.freeClientCap,
}
}
}
freePeers := int(totalRecharge / s.freeClientCap)
if freePeers < s.maxPeers {
log.Warn("Light peer count limited", "specified", s.maxPeers, "allowed", freePeers)
}
s.freeClientPool = newFreeClientPool(s.chainDb, s.freeClientCap, 10000, mclock.System{}, func(id string) { go s.protocolManager.removePeer(id) })
s.priorityClientPool = newPriorityClientPool(s.freeClientCap, s.protocolManager.peers, s.freeClientPool)
s.protocolManager.peers.notify(s.priorityClientPool)
s.startEventLoop()
s.protocolManager.Start(s.config.LightPeers)
if srvr.DiscV5 != nil {
for _, topic := range s.lesTopics {
@ -156,185 +239,14 @@ func (s *LesServer) SetBloomBitsIndexer(bloomIndexer *core.ChainIndexer) {
func (s *LesServer) Stop() {
s.chtIndexer.Close()
// bloom trie indexer is closed by parent bloombits indexer
s.fcCostStats.store()
s.fcManager.Stop()
go func() {
<-s.protocolManager.noMorePeers
}()
s.freeClientPool.stop()
s.costTracker.stop()
s.protocolManager.Stop()
}
type requestCosts struct {
baseCost, reqCost uint64
}
type requestCostTable map[uint64]*requestCosts
type RequestCostList []struct {
MsgCode, BaseCost, ReqCost uint64
}
func (list RequestCostList) decode() requestCostTable {
table := make(requestCostTable)
for _, e := range list {
table[e.MsgCode] = &requestCosts{
baseCost: e.BaseCost,
reqCost: e.ReqCost,
}
}
return table
}
type linReg struct {
sumX, sumY, sumXX, sumXY float64
cnt uint64
}
const linRegMaxCnt = 100000
func (l *linReg) add(x, y float64) {
if l.cnt >= linRegMaxCnt {
sub := float64(l.cnt+1-linRegMaxCnt) / linRegMaxCnt
l.sumX -= l.sumX * sub
l.sumY -= l.sumY * sub
l.sumXX -= l.sumXX * sub
l.sumXY -= l.sumXY * sub
l.cnt = linRegMaxCnt - 1
}
l.cnt++
l.sumX += x
l.sumY += y
l.sumXX += x * x
l.sumXY += x * y
}
func (l *linReg) calc() (b, m float64) {
if l.cnt == 0 {
return 0, 0
}
cnt := float64(l.cnt)
d := cnt*l.sumXX - l.sumX*l.sumX
if d < 0.001 {
return l.sumY / cnt, 0
}
m = (cnt*l.sumXY - l.sumX*l.sumY) / d
b = (l.sumY / cnt) - (m * l.sumX / cnt)
return b, m
}
func (l *linReg) toBytes() []byte {
var arr [40]byte
binary.BigEndian.PutUint64(arr[0:8], math.Float64bits(l.sumX))
binary.BigEndian.PutUint64(arr[8:16], math.Float64bits(l.sumY))
binary.BigEndian.PutUint64(arr[16:24], math.Float64bits(l.sumXX))
binary.BigEndian.PutUint64(arr[24:32], math.Float64bits(l.sumXY))
binary.BigEndian.PutUint64(arr[32:40], l.cnt)
return arr[:]
}
func linRegFromBytes(data []byte) *linReg {
if len(data) != 40 {
return nil
}
l := &linReg{}
l.sumX = math.Float64frombits(binary.BigEndian.Uint64(data[0:8]))
l.sumY = math.Float64frombits(binary.BigEndian.Uint64(data[8:16]))
l.sumXX = math.Float64frombits(binary.BigEndian.Uint64(data[16:24]))
l.sumXY = math.Float64frombits(binary.BigEndian.Uint64(data[24:32]))
l.cnt = binary.BigEndian.Uint64(data[32:40])
return l
}
type requestCostStats struct {
lock sync.RWMutex
db ethdb.Database
stats map[uint64]*linReg
}
type requestCostStatsRlp []struct {
MsgCode uint64
Data []byte
}
var rcStatsKey = []byte("_requestCostStats")
func newCostStats(db ethdb.Database) *requestCostStats {
stats := make(map[uint64]*linReg)
for _, code := range reqList {
stats[code] = &linReg{cnt: 100}
}
if db != nil {
data, err := db.Get(rcStatsKey)
var statsRlp requestCostStatsRlp
if err == nil {
err = rlp.DecodeBytes(data, &statsRlp)
}
if err == nil {
for _, r := range statsRlp {
if stats[r.MsgCode] != nil {
if l := linRegFromBytes(r.Data); l != nil {
stats[r.MsgCode] = l
}
}
}
}
}
return &requestCostStats{
db: db,
stats: stats,
}
}
func (s *requestCostStats) store() {
s.lock.Lock()
defer s.lock.Unlock()
statsRlp := make(requestCostStatsRlp, len(reqList))
for i, code := range reqList {
statsRlp[i].MsgCode = code
statsRlp[i].Data = s.stats[code].toBytes()
}
if data, err := rlp.EncodeToBytes(statsRlp); err == nil {
s.db.Put(rcStatsKey, data)
}
}
func (s *requestCostStats) getCurrentList() RequestCostList {
s.lock.Lock()
defer s.lock.Unlock()
list := make(RequestCostList, len(reqList))
for idx, code := range reqList {
b, m := s.stats[code].calc()
if m < 0 {
b += m
m = 0
}
if b < 0 {
b = 0
}
list[idx].MsgCode = code
list[idx].BaseCost = uint64(b * 2)
list[idx].ReqCost = uint64(m * 2)
}
return list
}
func (s *requestCostStats) update(msgCode, reqCnt, cost uint64) {
s.lock.Lock()
defer s.lock.Unlock()
c, ok := s.stats[msgCode]
if !ok || reqCnt == 0 {
return
}
c.add(float64(reqCnt), float64(cost))
}
func (pm *ProtocolManager) blockLoop() {
pm.wg.Add(1)
headCh := make(chan core.ChainHeadEvent, 10)
@ -371,12 +283,7 @@ func (pm *ProtocolManager) blockLoop() {
switch p.announceType {
case announceTypeSimple:
select {
case p.announceChn <- announce:
default:
pm.removePeer(p.id)
}
p.queueSend(func() { p.SendAnnounce(announce) })
case announceTypeSigned:
if !signed {
signedAnnounce = announce
@ -384,11 +291,7 @@ func (pm *ProtocolManager) blockLoop() {
signed = true
}
select {
case p.announceChn <- signedAnnounce:
default:
pm.removePeer(p.id)
}
p.queueSend(func() { p.SendAnnounce(signedAnnounce) })
}
}
}

View File

@ -14,7 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (

261
les/servingqueue.go Normal file
View File

@ -0,0 +1,261 @@
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package les
import (
"sync"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/common/prque"
)
// servingQueue allows running tasks in a limited number of threads and puts the
// waiting tasks in a priority queue
type servingQueue struct {
tokenCh chan runToken
queueAddCh, queueBestCh chan *servingTask
stopThreadCh, quit chan struct{}
setThreadsCh chan int
wg sync.WaitGroup
threadCount int // number of currently running threads
queue *prque.Prque // priority queue for waiting or suspended tasks
best *servingTask // the highest priority task (not included in the queue)
suspendBias int64 // priority bias against suspending an already running task
}
// servingTask represents a request serving task. Tasks can be implemented to
// run in multiple steps, allowing the serving queue to suspend execution between
// steps if higher priority tasks are entered. The creator of the task should
// set the following fields:
//
// - priority: greater value means higher priority; values can wrap around the int64 range
// - run: execute a single step; return true if finished
// - after: executed after run finishes or returns an error, receives the total serving time
type servingTask struct {
sq *servingQueue
servingTime uint64
priority int64
biasAdded bool
token runToken
tokenCh chan runToken
}
// runToken received by servingTask.start allows the task to run. Closing the
// channel by servingTask.stop signals the thread controller to allow a new task
// to start running.
type runToken chan struct{}
// start blocks until the task can start and returns true if it is allowed to run.
// Returning false means that the task should be cancelled.
func (t *servingTask) start() bool {
select {
case t.token = <-t.sq.tokenCh:
default:
t.tokenCh = make(chan runToken, 1)
select {
case t.sq.queueAddCh <- t:
case <-t.sq.quit:
return false
}
select {
case t.token = <-t.tokenCh:
case <-t.sq.quit:
return false
}
}
if t.token == nil {
return false
}
t.servingTime -= uint64(mclock.Now())
return true
}
// done signals the thread controller about the task being finished and returns
// the total serving time of the task in nanoseconds.
func (t *servingTask) done() uint64 {
t.servingTime += uint64(mclock.Now())
close(t.token)
return t.servingTime
}
// waitOrStop can be called during the execution of the task. It blocks if there
// is a higher priority task waiting (a bias is applied in favor of the currently
// running task). Returning true means that the execution can be resumed. False
// means the task should be cancelled.
func (t *servingTask) waitOrStop() bool {
t.done()
if !t.biasAdded {
t.priority += t.sq.suspendBias
t.biasAdded = true
}
return t.start()
}
// newServingQueue returns a new servingQueue
func newServingQueue(suspendBias int64) *servingQueue {
sq := &servingQueue{
queue: prque.New(nil),
suspendBias: suspendBias,
tokenCh: make(chan runToken),
queueAddCh: make(chan *servingTask, 100),
queueBestCh: make(chan *servingTask),
stopThreadCh: make(chan struct{}),
quit: make(chan struct{}),
setThreadsCh: make(chan int, 10),
}
sq.wg.Add(2)
go sq.queueLoop()
go sq.threadCountLoop()
return sq
}
// newTask creates a new task with the given priority
func (sq *servingQueue) newTask(priority int64) *servingTask {
return &servingTask{
sq: sq,
priority: priority,
}
}
// threadController is started in multiple goroutines and controls the execution
// of tasks. The number of active thread controllers equals the allowed number of
// concurrently running threads. It tries to fetch the highest priority queued
// task first. If there are no queued tasks waiting then it can directly catch
// run tokens from the token channel and allow the corresponding tasks to run
// without entering the priority queue.
func (sq *servingQueue) threadController() {
for {
token := make(runToken)
select {
case best := <-sq.queueBestCh:
best.tokenCh <- token
default:
select {
case best := <-sq.queueBestCh:
best.tokenCh <- token
case sq.tokenCh <- token:
case <-sq.stopThreadCh:
sq.wg.Done()
return
case <-sq.quit:
sq.wg.Done()
return
}
}
<-token
select {
case <-sq.stopThreadCh:
sq.wg.Done()
return
case <-sq.quit:
sq.wg.Done()
return
default:
}
}
}
// addTask inserts a task into the priority queue
func (sq *servingQueue) addTask(task *servingTask) {
if sq.best == nil {
sq.best = task
} else if task.priority > sq.best.priority {
sq.queue.Push(sq.best, sq.best.priority)
sq.best = task
return
} else {
sq.queue.Push(task, task.priority)
}
}
// queueLoop is an event loop running in a goroutine. It receives tasks from queueAddCh
// and always tries to send the highest priority task to queueBestCh. Successfully sent
// tasks are removed from the queue.
func (sq *servingQueue) queueLoop() {
for {
if sq.best != nil {
select {
case task := <-sq.queueAddCh:
sq.addTask(task)
case sq.queueBestCh <- sq.best:
if sq.queue.Size() == 0 {
sq.best = nil
} else {
sq.best, _ = sq.queue.PopItem().(*servingTask)
}
case <-sq.quit:
sq.wg.Done()
return
}
} else {
select {
case task := <-sq.queueAddCh:
sq.addTask(task)
case <-sq.quit:
sq.wg.Done()
return
}
}
}
}
// threadCountLoop is an event loop running in a goroutine. It adjusts the number
// of active thread controller goroutines.
func (sq *servingQueue) threadCountLoop() {
var threadCountTarget int
for {
for threadCountTarget > sq.threadCount {
sq.wg.Add(1)
go sq.threadController()
sq.threadCount++
}
if threadCountTarget < sq.threadCount {
select {
case threadCountTarget = <-sq.setThreadsCh:
case sq.stopThreadCh <- struct{}{}:
sq.threadCount--
case <-sq.quit:
sq.wg.Done()
return
}
} else {
select {
case threadCountTarget = <-sq.setThreadsCh:
case <-sq.quit:
sq.wg.Done()
return
}
}
}
}
// setThreads sets the allowed processing thread count, suspending tasks as soon as
// possible if necessary.
func (sq *servingQueue) setThreads(threadCount int) {
select {
case sq.setThreadsCh <- threadCount:
case <-sq.quit:
return
}
}
// stop stops task processing as soon as possible and shuts down the serving queue.
func (sq *servingQueue) stop() {
close(sq.quit)
sq.wg.Wait()
}

View File

@ -21,6 +21,7 @@ import (
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/rlp"
)
type ltrInfo struct {
@ -113,21 +114,22 @@ func (self *LesTxRelay) send(txs types.Transactions, count int) {
for p, list := range sendTo {
pp := p
ll := list
enc, _ := rlp.EncodeToBytes(ll)
reqID := genReqID()
rq := &distReq{
getCost: func(dp distPeer) uint64 {
peer := dp.(*peer)
return peer.GetRequestCost(SendTxMsg, len(ll))
return peer.GetTxRelayCost(len(ll), len(enc))
},
canSend: func(dp distPeer) bool {
return !dp.(*peer).isOnlyAnnounce && dp.(*peer) == pp
},
request: func(dp distPeer) func() {
peer := dp.(*peer)
cost := peer.GetRequestCost(SendTxMsg, len(ll))
peer.fcServer.QueueRequest(reqID, cost)
return func() { peer.SendTxs(reqID, cost, ll) }
cost := peer.GetTxRelayCost(len(ll), len(enc))
peer.fcServer.QueuedRequest(reqID, cost)
return func() { peer.SendTxs(reqID, cost, enc) }
},
}
self.reqDist.queue(rq)

View File

@ -11,6 +11,7 @@ import (
"crypto/ecdsa"
"math/big"
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/core"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/eth"
@ -217,7 +218,7 @@ func newFullPeerPair(t *testing.T, index int, numberOfblocks int, chainGen func(
// newLightPeer creates node with light sync mode
func newLightPeer(t *testing.T, ulcConfig *eth.ULCConfig) pairPeer {
peers := newPeerSet()
dist := newRequestDistributor(peers, make(chan struct{}))
dist := newRequestDistributor(peers, make(chan struct{}), &mclock.System{})
rm := newRetrieveManager(peers, dist, nil)
ldb := ethdb.NewMemDatabase()

View File

@ -14,6 +14,8 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package light implements on-demand retrieval capable state and chain objects
// for the Ethereum Light Client.
package light
import (

View File

@ -14,8 +14,6 @@
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package light implements on-demand retrieval capable state and chain objects
// for the Ethereum Light Client.
package light
import (

View File

@ -97,7 +97,11 @@ func (e *ExecAdapter) NewNode(config *NodeConfig) (Node, error) {
Stack: node.DefaultConfig,
Node: config,
}
if config.DataDir != "" {
conf.Stack.DataDir = config.DataDir
} else {
conf.Stack.DataDir = filepath.Join(dir, "data")
}
conf.Stack.WSHost = "127.0.0.1"
conf.Stack.WSPort = 0
conf.Stack.WSOrigins = []string{"*"}

View File

@ -90,6 +90,9 @@ type NodeConfig struct {
// Name is a human friendly name for the node like "node01"
Name string
// Use an existing database instead of a temporary one if non-empty
DataDir string
// Services are the names of the services which should be run when
// starting the node (for SimNodes it should be the names of services
// contained in SimAdapter.services, for other nodes it should be