diff --git a/core/vm/evm.go b/core/vm/evm.go index b8af9bd15..cc4214a16 100644 --- a/core/vm/evm.go +++ b/core/vm/evm.go @@ -123,19 +123,20 @@ func (evm *EVM) Cancel() { atomic.StoreInt32(&evm.abort, 1) } -// Call executes the contract associated with the addr with the given input as parameters. It also handles any -// necessary value transfer required and takes the necessary steps to create accounts and reverses the state in -// case of an execution error or failed value transfer. +// Call executes the contract associated with the addr with the given input as +// parameters. It also handles any necessary value transfer required and takes +// the necessary steps to create accounts and reverses the state in case of an +// execution error or failed value transfer. func (evm *EVM) Call(caller ContractRef, addr common.Address, input []byte, gas uint64, value *big.Int) (ret []byte, leftOverGas uint64, err error) { if evm.vmConfig.NoRecursion && evm.depth > 0 { return nil, gas, nil } - // Depth check execution. Fail if we're trying to execute above the - // limit. + // Fail if we're trying to execute above the call depth limit if evm.depth > int(params.CallCreateDepth) { return nil, gas, ErrDepth } + // Fail if we're trying to transfer more than the available balance if !evm.Context.CanTransfer(evm.StateDB, caller.Address(), value) { return nil, gas, ErrInsufficientBalance } @@ -173,21 +174,23 @@ func (evm *EVM) Call(caller ContractRef, addr common.Address, input []byte, gas return ret, contract.Gas, err } -// CallCode executes the contract associated with the addr with the given input as parameters. It also handles any -// necessary value transfer required and takes the necessary steps to create accounts and reverses the state in -// case of an execution error or failed value transfer. +// CallCode executes the contract associated with the addr with the given input +// as parameters. It also handles any necessary value transfer required and takes +// the necessary steps to create accounts and reverses the state in case of an +// execution error or failed value transfer. // -// CallCode differs from Call in the sense that it executes the given address' code with the caller as context. +// CallCode differs from Call in the sense that it executes the given address' +// code with the caller as context. func (evm *EVM) CallCode(caller ContractRef, addr common.Address, input []byte, gas uint64, value *big.Int) (ret []byte, leftOverGas uint64, err error) { if evm.vmConfig.NoRecursion && evm.depth > 0 { return nil, gas, nil } - // Depth check execution. Fail if we're trying to execute above the - // limit. + // Fail if we're trying to execute above the call depth limit if evm.depth > int(params.CallCreateDepth) { return nil, gas, ErrDepth } + // Fail if we're trying to transfer more than the available balance if !evm.CanTransfer(evm.StateDB, caller.Address(), value) { return nil, gas, ErrInsufficientBalance } @@ -211,18 +214,16 @@ func (evm *EVM) CallCode(caller ContractRef, addr common.Address, input []byte, return ret, contract.Gas, err } -// DelegateCall executes the contract associated with the addr with the given input as parameters. -// It reverses the state in case of an execution error. +// DelegateCall executes the contract associated with the addr with the given input +// as parameters. It reverses the state in case of an execution error. // -// DelegateCall differs from CallCode in the sense that it executes the given address' code with the caller as context -// and the caller is set to the caller of the caller. +// DelegateCall differs from CallCode in the sense that it executes the given address' +// code with the caller as context and the caller is set to the caller of the caller. func (evm *EVM) DelegateCall(caller ContractRef, addr common.Address, input []byte, gas uint64) (ret []byte, leftOverGas uint64, err error) { if evm.vmConfig.NoRecursion && evm.depth > 0 { return nil, gas, nil } - - // Depth check execution. Fail if we're trying to execute above the - // limit. + // Fail if we're trying to execute above the call depth limit if evm.depth > int(params.CallCreateDepth) { return nil, gas, ErrDepth } @@ -232,7 +233,7 @@ func (evm *EVM) DelegateCall(caller ContractRef, addr common.Address, input []by to = AccountRef(caller.Address()) ) - // Iinitialise a new contract and make initialise the delegate values + // Initialise a new contract and make initialise the delegate values contract := NewContract(caller, to, nil, gas).AsDelegate() contract.SetCallCode(&addr, evm.StateDB.GetCodeHash(addr), evm.StateDB.GetCode(addr)) @@ -245,6 +246,47 @@ func (evm *EVM) DelegateCall(caller ContractRef, addr common.Address, input []by return ret, contract.Gas, err } +// StaticCall executes the contract associated with the addr with the given input +// as parameters while disallowing any modifications to the state during the call. +// Opcodes that attempt to perform such modifications will result in exceptions +// instead of performing the modifications. +func (evm *EVM) StaticCall(caller ContractRef, addr common.Address, input []byte, gas uint64) (ret []byte, leftOverGas uint64, err error) { + if evm.vmConfig.NoRecursion && evm.depth > 0 { + return nil, gas, nil + } + // Fail if we're trying to execute above the call depth limit + if evm.depth > int(params.CallCreateDepth) { + return nil, gas, ErrDepth + } + // Make sure the readonly is only set if we aren't in readonly yet + // this makes also sure that the readonly flag isn't removed for + // child calls. + if !evm.interpreter.readonly { + evm.interpreter.readonly = true + defer func() { evm.interpreter.readonly = false }() + } + + var ( + to = AccountRef(addr) + snapshot = evm.StateDB.Snapshot() + ) + // Initialise a new contract and set the code that is to be used by the + // EVM. The contract is a scoped environment for this execution context + // only. + contract := NewContract(caller, to, new(big.Int), gas) + contract.SetCallCode(&addr, evm.StateDB.GetCodeHash(addr), evm.StateDB.GetCode(addr)) + + // When an error was returned by the EVM or when setting the creation code + // above we revert to the snapshot and consume any gas remaining. Additionally + // when we're in Homestead this also counts for code storage gas errors. + ret, err = run(evm, snapshot, contract, input) + if err != nil { + contract.UseGas(contract.Gas) + evm.StateDB.RevertToSnapshot(snapshot) + } + return ret, contract.Gas, err +} + // Create creates a new contract using code as deployment code. func (evm *EVM) Create(caller ContractRef, code []byte, gas uint64, value *big.Int) (ret []byte, contractAddr common.Address, leftOverGas uint64, err error) { if evm.vmConfig.NoRecursion && evm.depth > 0 { diff --git a/core/vm/gas_table.go b/core/vm/gas_table.go index 761ca4450..8a6c2741d 100644 --- a/core/vm/gas_table.go +++ b/core/vm/gas_table.go @@ -423,6 +423,33 @@ func gasDelegateCall(gt params.GasTable, evm *EVM, contract *Contract, stack *St return gas, nil } +func gasStaticCall(gt params.GasTable, evm *EVM, contract *Contract, stack *Stack, mem *Memory, memorySize uint64) (uint64, error) { + gas, err := memoryGasCost(mem, memorySize) + if err != nil { + return 0, err + } + var overflow bool + if gas, overflow = math.SafeAdd(gas, gt.Calls); overflow { + return 0, errGasUintOverflow + } + + cg, err := callGas(gt, contract.Gas, gas, stack.Back(0)) + if err != nil { + return 0, err + } + // Replace the stack item with the new gas calculation. This means that + // either the original item is left on the stack or the item is replaced by: + // (availableGas - gas) * 63 / 64 + // We replace the stack item so that it's available when the opCall instruction is + // called. + stack.data[stack.len()-1] = new(big.Int).SetUint64(cg) + + if gas, overflow = math.SafeAdd(gas, cg); overflow { + return 0, errGasUintOverflow + } + return gas, nil +} + func gasPush(gt params.GasTable, evm *EVM, contract *Contract, stack *Stack, mem *Memory, memorySize uint64) (uint64, error) { return GasFastestStep, nil } diff --git a/core/vm/instructions.go b/core/vm/instructions.go index 4f9e45ffe..aaa8d7945 100644 --- a/core/vm/instructions.go +++ b/core/vm/instructions.go @@ -17,6 +17,7 @@ package vm import ( + "errors" "fmt" "math/big" @@ -28,7 +29,8 @@ import ( ) var ( - bigZero = new(big.Int) + bigZero = new(big.Int) + errWriteProtection = errors.New("evm: write protection") ) func opAdd(pc *uint64, evm *EVM, contract *Contract, memory *Memory, stack *Stack) ([]byte, error) { @@ -656,6 +658,35 @@ func opDelegateCall(pc *uint64, evm *EVM, contract *Contract, memory *Memory, st return ret, nil } +func opStaticCall(pc *uint64, evm *EVM, contract *Contract, memory *Memory, stack *Stack) ([]byte, error) { + // pop gas + gas := stack.pop().Uint64() + // pop address + addr := stack.pop() + // pop input size and offset + inOffset, inSize := stack.pop(), stack.pop() + // pop return size and offset + retOffset, retSize := stack.pop(), stack.pop() + + address := common.BigToAddress(addr) + + // Get the arguments from the memory + args := memory.Get(inOffset.Int64(), inSize.Int64()) + + ret, returnGas, err := evm.StaticCall(contract, address, args, gas) + if err != nil { + stack.push(new(big.Int)) + } else { + stack.push(big.NewInt(1)) + + memory.Set(retOffset.Uint64(), retSize.Uint64(), ret) + } + contract.Gas += returnGas + + evm.interpreter.intPool.put(addr, inOffset, inSize, retOffset, retSize) + return ret, nil +} + func opReturn(pc *uint64, evm *EVM, contract *Contract, memory *Memory, stack *Stack) ([]byte, error) { offset, size := stack.pop(), stack.pop() ret := memory.GetPtr(offset.Int64(), size.Int64()) diff --git a/core/vm/interpreter.go b/core/vm/interpreter.go index 3faa98704..661ada691 100644 --- a/core/vm/interpreter.go +++ b/core/vm/interpreter.go @@ -69,6 +69,8 @@ func NewInterpreter(evm *EVM, cfg Config) *Interpreter { // we'll set the default jump table. if !cfg.JumpTable[STOP].valid { switch { + case evm.ChainConfig().IsMetropolis(evm.BlockNumber): + cfg.JumpTable = metropolisInstructionSet case evm.ChainConfig().IsHomestead(evm.BlockNumber): cfg.JumpTable = homesteadInstructionSet default: @@ -85,6 +87,18 @@ func NewInterpreter(evm *EVM, cfg Config) *Interpreter { } func (in *Interpreter) enforceRestrictions(op OpCode, operation operation, stack *Stack) error { + if in.evm.chainRules.IsMetropolis { + if in.readonly { + // If the interpreter is operating in readonly mode, make sure no + // state-modifying operation is performed. The 3rd stack item + // for a call operation is the value. Transfering value from one + // account to the others means the state is modified and should also + // return with an error. + if operation.writes || (op == CALL && stack.Back(2).BitLen() > 0) { + return errWriteProtection + } + } + } return nil } @@ -95,6 +109,7 @@ func (in *Interpreter) enforceRestrictions(op OpCode, operation operation, stack // considered a revert-and-consume-all-gas operation. No error specific checks // should be handled to reduce complexity and errors further down the in. func (in *Interpreter) Run(snapshot int, contract *Contract, input []byte) (ret []byte, err error) { + // Increment the call depth which is restricted to 1024 in.evm.depth++ defer func() { in.evm.depth-- }() diff --git a/core/vm/jump_table.go b/core/vm/jump_table.go index 0034eacb7..f6e8dae66 100644 --- a/core/vm/jump_table.go +++ b/core/vm/jump_table.go @@ -56,10 +56,26 @@ type operation struct { } var ( - frontierInstructionSet = NewFrontierInstructionSet() - homesteadInstructionSet = NewHomesteadInstructionSet() + frontierInstructionSet = NewFrontierInstructionSet() + homesteadInstructionSet = NewHomesteadInstructionSet() + metropolisInstructionSet = NewMetropolisInstructionSet() ) +// NewMetropolisInstructionSet returns the frontier, homestead and +// metropolis instructions. +func NewMetropolisInstructionSet() [256]operation { + // instructions that can be executed during the homestead phase. + instructionSet := NewHomesteadInstructionSet() + instructionSet[STATICCALL] = operation{ + execute: opStaticCall, + gasCost: gasStaticCall, + validateStack: makeStackFunc(6, 1), + memorySize: memoryStaticCall, + valid: true, + } + return instructionSet +} + // NewHomesteadInstructionSet returns the frontier and homestead // instructions that can be executed during the homestead phase. func NewHomesteadInstructionSet() [256]operation { @@ -810,6 +826,7 @@ func NewFrontierInstructionSet() [256]operation { validateStack: makeStackFunc(2, 0), memorySize: memoryLog, valid: true, + writes: true, }, LOG1: { execute: makeLog(1), @@ -817,6 +834,7 @@ func NewFrontierInstructionSet() [256]operation { validateStack: makeStackFunc(3, 0), memorySize: memoryLog, valid: true, + writes: true, }, LOG2: { execute: makeLog(2), @@ -824,6 +842,7 @@ func NewFrontierInstructionSet() [256]operation { validateStack: makeStackFunc(4, 0), memorySize: memoryLog, valid: true, + writes: true, }, LOG3: { execute: makeLog(3), @@ -831,6 +850,7 @@ func NewFrontierInstructionSet() [256]operation { validateStack: makeStackFunc(5, 0), memorySize: memoryLog, valid: true, + writes: true, }, LOG4: { execute: makeLog(4), @@ -838,6 +858,7 @@ func NewFrontierInstructionSet() [256]operation { validateStack: makeStackFunc(6, 0), memorySize: memoryLog, valid: true, + writes: true, }, CREATE: { execute: opCreate, diff --git a/core/vm/memory_table.go b/core/vm/memory_table.go index 654137c70..9d293a2f2 100644 --- a/core/vm/memory_table.go +++ b/core/vm/memory_table.go @@ -74,6 +74,13 @@ func memoryDelegateCall(stack *Stack) *big.Int { return math.BigMax(x, y) } +func memoryStaticCall(stack *Stack) *big.Int { + x := calcMemSize(stack.Back(4), stack.Back(5)) + y := calcMemSize(stack.Back(2), stack.Back(3)) + + return math.BigMax(x, y) +} + func memoryReturn(stack *Stack) *big.Int { return calcMemSize(stack.Back(0), stack.Back(1)) } diff --git a/core/vm/opcodes.go b/core/vm/opcodes.go index d4ba7f156..51925e8dd 100644 --- a/core/vm/opcodes.go +++ b/core/vm/opcodes.go @@ -201,6 +201,7 @@ const ( CALLCODE RETURN DELEGATECALL + STATICCALL = 0xfa SELFDESTRUCT = 0xff ) @@ -355,6 +356,7 @@ var opCodeToString = map[OpCode]string{ RETURN: "RETURN", CALLCODE: "CALLCODE", DELEGATECALL: "DELEGATECALL", + STATICCALL: "STATICCALL", SELFDESTRUCT: "SELFDESTRUCT", PUSH: "PUSH", @@ -405,6 +407,7 @@ var stringToOp = map[string]OpCode{ "CALLDATASIZE": CALLDATASIZE, "CALLDATACOPY": CALLDATACOPY, "DELEGATECALL": DELEGATECALL, + "STATICCALL": STATICCALL, "CODESIZE": CODESIZE, "CODECOPY": CODECOPY, "GASPRICE": GASPRICE,