Add step to fetch asset addresses in nitro-node playbook (#15)

Part of [Service Provider Setup](https://www.notion.so/Service-provider-setup-a09e2207e1f34f3a847f7ce9713b7ac5)

Co-authored-by: Adw8 <adwaitgharpure@gmail.com>
Reviewed-on: cerc-io/testnet-ops#15

.gitignore

@@ -0,0 +1 @@
+hosts.ini

README.md

@@ -1,2 +1,58 @@
 # testnet-ops
 
+## Installation
+
+- Install [Ansible](https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html#installing-and-upgrading-ansible-with-pip)
+
+- Add location of the directory containing the ansible binary to your `PATH`
+
+- Set Locale Encoding to `UTF-8`
+
+  Ansible requires the locale encoding to be `UTF-8`. You can either use the `LANG` prefix when running Ansible commands or set the system-wide locale
+
+  - Option 1: Use `LANG` Prefix in Commands
+
+    If you prefer not to change the system-wide locale, you can use the `LANG` prefix when running Ansible commands:
+
+    ```bash
+    LANG=en_US.UTF-8 ansible-playbook your_playbook.yml
+    ```
+
+  - Option 2: Set System-Wide Locale
+
+    - Edit the `/etc/default/locale` file:
+
+      ```bash
+      sudo nano /etc/default/locale
+      ```
+
+    - Set the `LANG` variable to en_US.UTF-8:
+
+      ```
+      LANG="en_US.UTF-8"
+      ```
+
+    - Reboot your system or log out and log back in to apply the changes
+
+    - Reference: <https://udhayakumarc.medium.com/error-ansible-requires-the-locale-encoding-to-be-utf-8-detected-iso8859-1-6da808387f7d>
+
+- Verify ansible installation by running the following command:
+
+  ```bash
+  ansible --version
+  # ansible [core 2.17.2]
+  ```
+
+- Install `sshpass` used for automating SSH password authentication
+
+  ```bash
+  sudo apt-get install sshpass
+  ```
+
+## Playbooks
+
+- [stack-orchestrator-setup](./stack-orchestrator-setup/README.md)
+- [nitro-node-setup](./nitro-nodes-setup/README.md)
+- [nitro-bridge-setup](./nitro-bridge-setup/README.md)
+- [nitro-contracts-setup](./nitro-contracts-setup/README.md)
+- [service-provider-setup](./service-provider-setup/README.md)

hosts.example.ini

@@ -0,0 +1,2 @@
+[deployment_host]
+<host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'

nitro-bridge-setup/.gitignore

@@ -0,0 +1,3 @@
+out
+bridge-vars.yml
+hosts.ini

nitro-bridge-setup/README.md

@@ -0,0 +1,102 @@
+# nitro-bridge-setup
+
+## Prerequisites
+
+- Setup Ansible: To get started, follow the [installation](../README.md#installation) guide to setup ansible on your machine.
+
+- Setup user with passwordless sudo: Follow steps from [Setup a user](../user-setup/README.md#setup-a-user) to setup a new user
+
+## Setup
+
+The following commands have to be executed in the [`nitro-bridge-setup`](./) directory:
+
+- Copy the `bridge-vars.example.yml` vars file:
+
+  ```bash
+  cp bridge-vars.example.yml bridge-vars.yml
+  ```
+
+- Edit [`bridge-vars.yml`](./bridge-vars.yml) with the required values:
+
+  ```yaml
+  # L1 WS endpoint
+  nitro_chain_url: ""
+
+  # Private key for the bridge's nitro address
+  nitro_sc_pk: ""
+
+  # Private key for a funded account on L1
+  # This account should have tokens for funding Nitro channels
+  nitro_chain_pk: ""
+
+  # Custom L2 token to be deployed
+  token_name: "LaconicNetworkToken"
+  token_symbol: "LNT"
+  initial_token_supply: "129600"
+
+  # Addresses of the deployed nitro contracts
+  na_address: ""
+  vpa_address: ""
+  ca_address: ""
+  ```
+
+## Run Nitro Bridge
+
+- Create a new `hosts.ini` file:
+
+  ```bash
+  cp ../hosts.example.ini hosts.ini
+  ```
+
+- Edit the [`hosts.ini`](./hosts.ini) file:
+
+  ```ini
+  [<deployment_host>]
+  <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
+  ```
+
+  - Replace `<deployment_host>` with `nitro_host`
+  - Replace `<host_name>` with the alias of your choice
+  - Replace `<target_ip>` with the IP address or hostname of the target machine
+  - Replace `<ssh_user>` with the username of the user that you set up on target machine (e.g. dev, ubuntu)
+
+- Verify that you are able to connect to the host using the following command:
+
+  ```bash
+  ansible all -m ping -i hosts.ini
+
+  # Expected output:
+
+  # <host_name> | SUCCESS => {
+  #  "ansible_facts": {
+  #      "discovered_interpreter_python": "/usr/bin/python3.10"
+  #  },
+  #  "changed": false,
+  #  "ping": "pong"
+  # }
+  ```
+
+- Execute the `run-nitro-bridge.yml` Ansible playbook for deploying nitro bridge:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-bridge.yml --extra-vars='{ "target_host": "nitro_host"}'  --user $USER
+  ```
+
+  NOTE: By default, deployments are created in an `out` directory. To change this location, update the `nitro_directory` variable in the [setup-vars.yml](./setup-vars.yml) file
+
+- For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-bridge.yml --extra-vars='{ "target_host": "nitro_host", "skip_container_build": true }' --user $USER
+  ```
+
+## Check Deployment Status
+
+Run the following command in the directory where the bridge-deployment is created:
+
+- Check logs for deployments:
+
+  ```bash
+  # Check the bridge deployment logs, ensure that the node is running
+  laconic-so deployment --dir bridge-deployment logs nitro-bridge -f
+  ```

nitro-bridge-setup/bridge-vars.example.yml

@@ -0,0 +1,6 @@
+nitro_chain_url: ""
+nitro_chain_pk: ""
+nitro_sc_pk: ""
+na_address: ""
+vpa_address: ""
+ca_address: ""

nitro-bridge-setup/run-nitro-bridge.yml

@@ -0,0 +1,57 @@
+- name: Setup go-nitro on host
+  hosts: "{{ target_host }}"
+
+  vars_files:
+    - setup-vars.yml
+    - bridge-vars.yml
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  tasks:
+    - name: Create directory for nitro bridge deployment
+      file:
+        path: "{{ nitro_directory }}"
+        state: directory
+
+    - name: Change owner of nitro-directory
+      file:
+        path: "{{ nitro_directory }}"
+        owner: "{{ansible_user}}"
+        group: "{{ansible_user}}"
+        state: directory
+        recurse: yes
+
+    - name: Clone go-nitro stack repo
+      expect:
+        command: laconic-so fetch-stack git.vdb.to/cerc-io/nitro-stack --git-ssh --pull
+        responses:
+          "Are you sure you want to continue connecting \\(yes/no/\\[fingerprint\\]\\)\\?": "yes"
+      timeout: 300
+      ignore_errors: yes
+
+    - name: Build containers
+      command: laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/bridge build-containers --force-rebuild
+      when: not skip_container_build
+
+    - name: Check if deployment exists for bridge node
+      stat:
+        path: "{{ nitro_directory }}/bridge-deployment"
+      register: bridge_deployment
+
+    - name: Generate spec file for bridge deployment
+      template:
+        src: "./templates/specs/bridge-nitro-spec.yml.j2"
+        dest: "{{ nitro_directory }}/bridge-nitro-spec.yml"
+      when: not bridge_deployment.stat.exists
+
+    - name: Create a deployment for the bridge node
+      command: laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/bridge deploy create --spec-file bridge-nitro-spec.yml --deployment-dir bridge-deployment
+      args:
+        chdir: "{{ nitro_directory }}"
+      when: not bridge_deployment.stat.exists
+
+    - name: Start the nitro bridge
+      command: laconic-so deployment --dir bridge-deployment start
+      args:
+        chdir: "{{ nitro_directory }}"

nitro-bridge-setup/setup-vars.yml

@@ -0,0 +1,3 @@
+target_host: "nitro_host"
+nitro_directory: out
+skip_container_build: false

nitro-bridge-setup/templates/specs/bridge-nitro-spec.yml.j2

@@ -0,0 +1,20 @@
+stack: /home/{{ ansible_user }}/cerc/nitro-stack/stack-orchestrator/stacks/bridge
+deploy-to: compose
+config:
+  NITRO_CHAIN_URL: {{ nitro_chain_url }}
+  NITRO_CHAIN_PK: {{ nitro_chain_pk }}
+  NITRO_SC_PK: {{ nitro_sc_pk }}
+  NA_ADDRESS: "{{ na_address }}"
+  VPA_ADDRESS: "{{ vpa_address }}"
+  CA_ADDRESS: "{{ ca_address }}"
+network:
+  ports:
+    nitro-bridge:
+     - 0.0.0.0:3005:3005
+     - 0.0.0.0:3006:3006
+     - 0.0.0.0:4006:4006
+volumes:
+  nitro_bridge_data: ./data/nitro_bridge_data
+  nitro_bridge_tls: ./data/nitro_bridge_tls
+  nitro_node_caroot: ./data/nitro_node_caroot
+  nitro_deployment: ./data/nitro_deployment

nitro-contracts-setup/.gitignore

@@ -0,0 +1,3 @@
+out
+contract-vars.yml
+hosts.ini

nitro-contracts-setup/README.md

@@ -0,0 +1,106 @@
+# nitro-contracts-setup
+
+## Prerequisites
+
+- Setup Ansible: To get started, follow the [installation](../README.md#installation) guide to setup ansible on your machine.
+
+- Setup user with passwordless sudo: Follow steps from [Setup a user](../user-setup/README.md#setup-a-user) to setup a new user with passwordless sudo
+
+## Setup
+
+The following commands have to be executed in the [`nitro-contracts-setup`](./) directory:
+
+- Copy the `contract-vars.example.yml` vars file
+
+  ```bash
+  cp contract-vars.example.yml contract-vars.yml
+  ```
+
+- Edit [`contract-vars.yml`](./contract-vars.yml) and fill in the following values
+
+  ```bash
+  # L1 RPC endpoint
+  geth_url: ""
+
+  # L1 chain ID
+  geth_chain_id: ""
+
+  # Private key for a funded account on L1 to use for contracts deployment on L1
+  geth_deployer_pk: ""
+
+  # Custom L1 token to be deployed
+  token_name: "TestToken"
+  token_symbol: "TST"
+  initial_token_supply: "129600"
+  ```
+
+## Deploy Contracts
+
+- Create a new `hosts.ini` file:
+
+   ```bash
+   cp ../hosts.example.ini hosts.ini
+   ```
+
+- Edit the [`hosts.ini`](./hosts.ini) file:
+
+  ```ini
+  [<deployment_host>]
+  <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
+  ```
+
+  - Replace `<deployment_host>` with `nitro_host`
+  - Replace `<host_name>` with the alias of your choice
+  - Replace `<target_ip>` with the IP address or hostname of the target machine
+  - Replace `<ssh_user>` with the username of the user that you set up on target machine (e.g. dev, ubuntu)
+
+- Verify that you are able to connect to the host using the following command
+
+  ```bash
+  ansible all -m ping -i hosts.ini
+
+  # Expected output:
+
+  # <host_name> | SUCCESS => {
+  #  "ansible_facts": {
+  #      "discovered_interpreter_python": "/usr/bin/python3.10"
+  #  },
+  #  "changed": false,
+  #  "ping": "pong"
+  # }
+  ```
+
+- Execute the `deploy-contracts.yml` Ansible playbook to deploy nitro contracts:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook -i hosts.ini deploy-contracts.yml --extra-vars='{ "target_host": "nitro_host"}'  --user $USER
+  ```
+
+  NOTE: By default, deployments are created in an `out` directory. To change this location, update the `nitro_directory` variable in the [setup-vars.yml](./setup-vars.yml) file
+
+- For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook -i hosts.ini deploy-contracts.yml --extra-vars='{ "target_host": "nitro_host", "skip_container_build": true }' --user $USER
+  ```
+
+## Check Deployment Status
+
+Run the following command in the directory where the nitro-contracts-deployment is created:
+
+- Check logs for deployments:
+
+  ```bash
+    # Check the L2 nitro contract deployment logs
+  laconic-so deployment --dir nitro-contracts-deployment logs l2-nitro-contracts -f
+    ```
+
+## Get Contract Addresses
+
+Run the following commands in the directory where the deployments are created:
+
+- Get addresses of L1 nitro contracts:
+
+  ```bash
+  laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "cat /app/deployment/nitro-addresses.json"
+  ```

nitro-contracts-setup/contract-vars.example.yml

@@ -0,0 +1,6 @@
+geth_url: ""
+geth_chain_id: ""
+geth_deployer_pk: ""
+token_name: ""
+token_symbol: ""
+initial_token_supply: ""

nitro-contracts-setup/deploy-contracts.yml

@@ -0,0 +1,101 @@
+- name: Deploy nitro contracts
+  hosts: "{{ target_host }}"
+
+  vars_files:
+    - setup-vars.yml
+    - contract-vars.yml
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  tasks:
+    - name: Create directory for nitro bridge deployment
+      file:
+        path: "{{ nitro_directory }}"
+        state: directory
+
+    - name: Change owner of nitro-directory
+      file:
+        path: "{{ nitro_directory }}"
+        owner: "{{ansible_user}}"
+        group: "{{ansible_user}}"
+        state: directory
+        recurse: yes
+
+    - name: Clone nitro stack repo
+      expect:
+        command: laconic-so fetch-stack git.vdb.to/cerc-io/nitro-stack --git-ssh --pull
+        responses:
+          "Are you sure you want to continue connecting \\(yes/no/\\[fingerprint\\]\\)\\?": "yes"
+      timeout: 300
+      ignore_errors: yes
+
+    - name: Clone repositories required for nitro-stack
+      expect:
+        command: laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-contracts setup-repositories --git-ssh --pull
+        responses:
+          "Are you sure you want to continue connecting \\(yes/no/\\[fingerprint\\]\\)\\?": "yes"
+      timeout: 300
+      ignore_errors: yes
+
+    - name: Build containers
+      command: laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-contracts build-containers --force-rebuild
+      when: not skip_container_build
+
+    - name: Generate spec file for nitro contracts deployment
+      template:
+        src: "./templates/specs/nitro-contracts-spec.yml.j2"
+        dest: "{{ nitro_directory }}/nitro-contracts-spec.yml"
+
+    - name: Check if deployment exists for nitro contracts
+      stat:
+        path: "{{ nitro_directory }}/nitro-contracts-deployment"
+      register: nitro_contracts_deployment
+
+    - name: Create a deployment for nitro contracts
+      command: laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-contracts deploy create --spec-file nitro-contracts-spec.yml --deployment-dir nitro-contracts-deployment
+      args:
+        chdir: "{{ nitro_directory }}"
+      when: not nitro_contracts_deployment.stat.exists
+
+    - name: Start deployment for nitro-contracts
+      command: laconic-so deployment --dir nitro-contracts-deployment start
+      args:
+        chdir: "{{ nitro_directory }}"
+
+    - name: Wait for the contracts to be deployed
+      wait_for:
+        path: "{{ nitro_directory }}/nitro-contracts-deployment/data/nitro_deployment/nitro-addresses.json"
+        timeout: 300
+
+    - name: Export NA_ADDRESS
+      shell: laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"{{ geth_chain_id }}\"[0].contracts.NitroAdjudicator.address' /app/deployment/nitro-addresses.json"
+      args:
+        chdir: "{{ nitro_directory }}"
+      register: na_address
+    - debug:
+        msg: "NA_ADDRESS: {{ na_address.stdout }}"
+
+    - name: Export CA_ADDRESS
+      shell: laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"{{ geth_chain_id }}\"[0].contracts.ConsensusApp.address' /app/deployment/nitro-addresses.json"
+      args:
+        chdir: "{{ nitro_directory }}"
+      register: ca_address
+    - debug:
+        msg: "CA_ADDRESS: {{ ca_address.stdout }}"
+
+    - name: Export VPA_ADDRESS
+      shell: laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"{{ geth_chain_id }}\"[0].contracts.VirtualPaymentApp.address' /app/deployment/nitro-addresses.json"
+      args:
+        chdir: "{{ nitro_directory }}"
+      register: vpa_address
+    - debug:
+        msg: "VPA_ADDRESS: {{ vpa_address.stdout }}"
+
+    - name: Export ASSET_ADDRESS
+      shell: laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"{{ geth_chain_id }}\"[0].contracts.{{ token_name }}.address' /app/deployment/nitro-addresses.json"
+      args:
+        chdir: "{{ nitro_directory }}"
+      register: asset_address
+    - debug:
+        msg: "ASSET_ADDRESS: {{ asset_address.stdout }}"

nitro-contracts-setup/setup-vars.yml

@@ -0,0 +1,3 @@
+target_host: "nitro_host"
+nitro_directory: out
+skip_container_build: false

nitro-contracts-setup/templates/specs/nitro-contracts-spec.yml.j2

@@ -0,0 +1,13 @@
+stack: /home/{{ ansible_user }}/cerc/nitro-stack/stack-orchestrator/stacks/nitro-contracts
+deploy-to: compose
+config:
+  GETH_URL: {{ geth_url }}
+  GETH_CHAIN_ID: {{ geth_chain_id }}
+  GETH_DEPLOYER_PK: {{ geth_deployer_pk }}
+  TOKEN_NAME: {{ token_name }}
+  TOKEN_SYMBOL: {{ token_symbol }}
+  INITIAL_TOKEN_SUPPLY: {{ initial_token_supply }}
+network:
+  ports: {}
+volumes:
+  nitro_deployment: ./data/nitro_deployment

nitro-nodes-setup/.gitignore

@@ -0,0 +1,3 @@
+out
+nitro-vars.yml
+hosts.ini

nitro-nodes-setup/README.md

@@ -0,0 +1,121 @@
+# nitro-nodes-setup
+
+## Prerequisites
+
+- Setup Ansible: To get started, follow the [installation](../README.md#installation) guide to setup ansible on your machine.
+
+- Setup user with passwordless sudo: Follow steps from [Setup a user](../user-setup/README.md#setup-a-user) to setup a new user with passwordless sudo
+
+## Setup
+
+The following commands have to be executed in [`nitro-nodes-setup`](./) directory
+
+- Copy the `nitro-vars.example.yml` vars file
+
+  ```bash
+  cp nitro-vars.example.yml nitro-vars.yml
+  ```
+
+- Edit [`nitro-vars.yml`](./nitro-vars.yml) and fill in the following values
+
+  ```bash
+  # L1 WS endpoint
+  nitro_chain_url: ""
+
+  # Private key for your nitro address
+  nitro_sc_pk: ""
+
+  # Private key of the account on chain that is used for funding channels in Nitro node
+  nitro_chain_pk: ""
+
+  # Contract address of NitroAdjudicator
+  na_address: ""
+
+  # Contract address of VirtualPaymentApp
+  vpa_address: ""
+
+  # Contract address of ConsensusApp
+  ca_address: ""
+
+  # Multiaddr of the L1 bridge node
+  nitro_l1_bridge_multiaddr: ""
+
+  # Multiaddr of the L2 bridge node
+  nitro_l2_bridge_multiaddr: ""
+
+  # Multiaddr with publically accessible IP address / DNS for your L1 nitro node
+  # Example: "/ip4/192.168.x.y/tcp/3009"
+  # Example: "/dns4/example.com/tcp/3009"
+  nitro_l1_ext_multiaddr: ""
+
+  # Multiaddr with publically accessible IP address / DNS for your L2 nitro node
+  nitro_l2_ext_multiaddr: ""
+  ```
+
+## Run Nitro Node
+
+- Create a new `hosts.ini` file:
+
+   ```bash
+   cp ../hosts.example.ini hosts.ini
+   ```
+
+- Edit the [`hosts.ini`](./hosts.ini) file:
+
+  ```ini
+  [<deployment_host>]
+  <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
+  ```
+
+  - Replace `<deployment_host>` with `nitro_host`
+  - Replace `<host_name>` with the alias of your choice
+  - Replace `<target_ip>` with the IP address or hostname of the target machine
+  - Replace `<ssh_user>` with the username of the user that you set up on target machine (e.g. dev, ubuntu)
+
+- Verify that you are able to connect to the host using the following command
+
+  ```bash
+  ansible all -m ping -i hosts.ini
+
+  # Expected output:
+
+  # <host_name> | SUCCESS => {
+  #  "ansible_facts": {
+  #      "discovered_interpreter_python": "/usr/bin/python3.10"
+  #  },
+  #  "changed": false,
+  #  "ping": "pong"
+  # }
+  ```
+
+- Copy and edit the [`nitro-vars.yml`](./nitro-vars.yml) file as described in the [local setup](./README.md#run-nitro-node-on-local-host) section
+
+- Execute the `run-nitro-nodes.yml` Ansible playbook to deploy nitro nodes:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-nodes.yml --extra-vars='{ "target_host": "nitro_host"}' --user $USER
+  ```
+
+  NOTE: By default, deployments are created in a `out` directory. To change this location, update the `nitro_directory` variable in the [setup-vars.yml](./setup-vars.yml) file
+
+- For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-nodes.yml --extra-vars='{ "target_host": "nitro_host", "skip_container_build": true }' --user $USER
+  ```
+
+## Check Deployment Status
+
+Run the following command in the directory where the deployments are created
+
+- Check L1 nitro node logs:
+
+  ```bash
+  laconic-so deployment --dir l1-nitro-deployment logs nitro-node -f
+  ```
+
+- Check L2 nitro node logs:
+
+  ```bash
+  laconic-so deployment --dir l2-nitro-deployment logs nitro-node -f
+  ```

nitro-nodes-setup/nitro-vars.example.yml

@@ -0,0 +1,10 @@
+nitro_chain_url: ""
+nitro_sc_pk: ""
+nitro_chain_pk: ""
+na_address: ""
+vpa_address: ""
+ca_address: ""
+nitro_l1_bridge_multiaddr: ""
+nitro_l2_bridge_multiaddr: ""
+nitro_l1_ext_multiaddr: ""
+nitro_l2_ext_multiaddr: ""

nitro-nodes-setup/run-nitro-nodes.yml

@@ -0,0 +1,122 @@
+- name: Setup and run nitro nodes
+  hosts: "{{ target_host }}"
+
+  vars_files:
+    - setup-vars.yml
+    - nitro-vars.yml
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  tasks:
+    - name: Install yq
+      get_url:
+        url: https://github.com/mikefarah/yq/releases/latest/download/yq_linux_amd64
+        dest: /usr/bin/yq
+        mode: '0755'
+      become: yes
+
+    - name: Create directory for nitro-stack
+      file:
+        path: "{{ nitro_directory }}"
+        state: directory
+
+    - name: Change owner of nitro-directory
+      file:
+        path: "{{ nitro_directory }}"
+        owner: "{{ansible_user}}"
+        group: "{{ansible_user}}"
+        state: directory
+        recurse: yes
+
+    - name: Clone nitro-stack repo
+      expect:
+        command: laconic-so fetch-stack git.vdb.to/cerc-io/nitro-stack --git-ssh --pull
+        responses:
+          "Are you sure you want to continue connecting \\(yes/no/\\[fingerprint\\]\\)\\?": "yes"
+      timeout: 300
+      ignore_errors: yes
+
+    - name: Build containers
+      command: laconic-so --stack {{ ansible_env.HOME }}/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node build-containers --force-rebuild
+      when: not skip_container_build
+
+    - name: Generate spec file for L1 nitro node
+      template:
+        src: "./templates/specs/l1-nitro-spec.yml.j2"
+        dest: "{{ nitro_directory }}/l1-nitro-spec.yml"
+
+    - name: Generate spec file for L2 nitro node
+      template:
+        src: "./templates/specs/l2-nitro-spec.yml.j2"
+        dest: "{{ nitro_directory }}/l2-nitro-spec.yml"
+
+    - name: Check if deployment exists for L1 nitro node
+      stat:
+        path: "{{ nitro_directory }}/l1-nitro-deployment"
+      register: l1_deployment
+
+    - name: Create a deployment for L1 nitro node
+      command:  laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy create --spec-file l1-nitro-spec.yml --deployment-dir l1-nitro-deployment
+      args:
+        chdir: "{{ nitro_directory }}"
+      when: not l1_deployment.stat.exists
+
+    - name: Check if deployment exists for L2 nitro node
+      stat:
+        path: "{{ nitro_directory }}/l2-nitro-deployment"
+      register: l2_deployment
+
+    - name: Create a deployment for L2 nitro node
+      command:  laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy create --spec-file l2-nitro-spec.yml --deployment-dir l2-nitro-deployment
+      args:
+        chdir: "{{ nitro_directory }}"
+      when: not l2_deployment.stat.exists
+
+    - name: Check if the config.env file is empty for L1 deployment
+      shell: "[ -s {{ nitro_directory }}/l1-nitro-deployment/config.env ] && echo 'File is not empty' || echo 'File is empty'"
+      register: file_check_result
+
+    - name: Display the result of the file check
+      debug:
+        msg: "{{ file_check_result.stdout }}"
+
+    - name: Copy config.env for L1 nitro deployment if it is empty
+      template:
+        src: "./templates/configs/l1-nitro-config.env.j2"
+        dest:  "{{ nitro_directory }}/l1-nitro-deployment/config.env"
+      when: file_check_result.stdout == 'File is empty'
+
+    - name: Check if the config.env file is empty for L2 deployment
+      shell: "[ -s {{ nitro_directory }}/l2-nitro-deployment/config.env ] && echo 'File is not empty' || echo 'File is empty'"
+      register: file_check_result
+
+    - name: Display the result of the file check
+      debug:
+        msg: "{{ file_check_result.stdout }}"
+
+    - name: Copy config.env for L2 nitro deployment if it is empty
+      template:
+        src: "./templates/configs/l2-nitro-config.env.j2"
+        dest:  "{{ nitro_directory }}/l2-nitro-deployment/config.env"
+      when: file_check_result.stdout == 'File is empty'
+
+    - name: Start deployment for L1 nitro node
+      command: laconic-so deployment --dir l1-nitro-deployment start
+      args:
+        chdir: "{{ nitro_directory }}"
+
+    - name: Start deployment for L2 nitro node
+      command: laconic-so deployment --dir l2-nitro-deployment start
+      args:
+        chdir: "{{ nitro_directory }}"
+
+    - name: Fetch the nitro-node-config file
+      get_url:
+        url: https://git.vdb.to/cerc-io/testnet-laconicd-stack/raw/branch/main/ops/stage2/nitro-node-config.yml
+        dest: "{{ nitro_directory }}"
+
+    - name: Fetch required asset addresses
+      get_url:
+        url: https://git.vdb.to/cerc-io/testnet-laconicd-stack/raw/branch/main/ops/stage2/assets.json
+        dest: "{{ nitro_directory }}"

nitro-nodes-setup/setup-vars.yml

@@ -0,0 +1,3 @@
+target_host: "nitro_host"
+nitro_directory: out
+skip_container_build: false

nitro-nodes-setup/templates/configs/l1-nitro-config.env.j2

@@ -0,0 +1,8 @@
+NITRO_CHAIN_URL={{ nitro_chain_url }}
+NITRO_SC_PK={{ nitro_sc_pk }}
+NITRO_CHAIN_PK={{ nitro_chain_pk }}
+NA_ADDRESS="{{ na_address }}"
+VPA_ADDRESS="{{ vpa_address }}"
+CA_ADDRESS="{{ ca_address }}"
+NITRO_BOOTPEERS={{ nitro_l1_bridge_multiaddr }}
+NITRO_EXT_MULTIADDR={{ nitro_l1_ext_multiaddr }}

nitro-nodes-setup/templates/configs/l2-nitro-config.env.j2

@@ -0,0 +1,6 @@
+NITRO_SC_PK={{ nitro_sc_pk }}
+VPA_ADDRESS="{{ vpa_address }}"
+CA_ADDRESS="{{ ca_address }}"
+NITRO_BOOTPEERS={{ nitro_l2_bridge_multiaddr }}
+NITRO_EXT_MULTIADDR={{ nitro_l2_ext_multiaddr }}
+NITRO_L2=true

nitro-nodes-setup/templates/specs/l1-nitro-spec.yml.j2

@@ -0,0 +1,11 @@
+stack: /home/{{ansible_user}}/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node
+deploy-to: compose
+network:
+  ports:
+    nitro-node:
+      - 3007:3005
+      - 4007:4005
+volumes:
+  nitro_node_data: ./data/nitro_node_data
+  nitro_node_tls: ./data/nitro_node_tls
+  nitro_node_caroot: ./data/nitro_node_caroot

nitro-nodes-setup/templates/specs/l2-nitro-spec.yml.j2

@@ -0,0 +1,11 @@
+stack: /home/{{ansible_user}}/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node
+deploy-to: compose
+network:
+  ports:
+    nitro-node:
+      - 3009:3005
+      - 4009:4005
+volumes:
+  nitro_node_data: ./data/nitro_node_data
+  nitro_node_tls: ./data/nitro_node_tls
+  nitro_node_caroot: ./data/nitro_node_caroot

service-provider-setup/.gitignore

@@ -0,0 +1,2 @@
+vars/*.yml
+!vars/*.example.yml

service-provider-setup/README.md

@@ -0,0 +1,201 @@
+# service-provider-setup
+
+This setup has been tested on digitalocean droplets running ubuntu 22.04 LTS
+
+## Prerequisites
+
+- Setup Ansible: follow the [installation](../README.md#installation) guide to setup ansible on your machine
+
+- Set up a DigitalOcean Droplet with passwordless SSH access
+
+- Buy a domain and configure [nameservers pointing to DigitalOcean](https://docs.digitalocean.com/products/networking/dns/getting-started/dns-registrars/)
+
+- Generate a DigitalOcean access token, used for API authentication and managing cloud resources
+
+- Setup a user: Follow steps from [Setup a user](../user-setup/README.md#setup-a-user) to setup a new user with passwordless sudo
+
+## Become a Service Provider
+
+### Setup
+
+- Copy the vars files:
+
+  ```bash
+  cd vars
+  cp dns-vars.example.yml dns-vars.yml
+  cp gpg-vars.example.yml gpg-vars.yml
+  cp k8s-vars.example.yml k8s-vars.yml
+  cp container-vars.example.yml container-vars.yml
+  cp laconicd-vars.example.yml laconicd-vars.yml
+  cp webapp-vars.example.yml webapp-vars.yml
+  cd -
+  ```
+
+- Update the following values in the respective variable files:
+
+  ```bash
+  # vars/dns-vars.yml
+  full_domain: ""                   # eg: laconic.com
+  service_provider_ip: ""           # eg: 23.111.78.179
+  do_api_token: ""                  # DigitalOcean access token that you generated, eg: dop_v1...
+
+  # vars/gpg-vars.yml
+  gpg_user_name: ""                 # full name of the user for the GPG key
+  gpg_user_email: ""                # email address associated with the GPG key
+  gpg_passphrase: ""                # passphrase for securing the GPG key
+
+  # vars/k8s-vars.yml
+  org_id: ""                        # eg: lcn
+  location_id: ""                   # eg: cad
+  support_email: ""                 # eg: support@laconic.com
+
+  # vars/container-vars.yml
+  container_registry_username: ""   # username to login to the container registry
+  container_registry_password: ""   # password to login to the container registry
+
+  # vars/laconicd-vars.yml
+  chain_id: "" # chain id to use for the Laconic chain
+
+  # vars/webapp-vars.yml
+  authority_name: ""                # eg: laconic-authority
+  cpu_reservation: "1"              # minimum number of cpu cores to be used, eg: 1
+  memory_reservation: "2G"          # minimum amount of memory in GB to be used, eg: 2G
+  cpu_limit: "6"                    # maximum number of cpu cores to be used, eg: 6
+  memory_limit: "8G"                # maximum amount of memory in GB to be used, eg: 8G
+  deployer_gpg_passphrase: ""       # passphrase for creating GPG key used by webapp-deployer, eg: SECRET
+  handle_auction_requests: "true"   # whether the webapp deployer should handle deployment auction requests, eg: true
+  auction_bid_amount: "500000"      # bid amount for deployment auctions in alnt, eg: 500000
+  ```
+
+- Create a new `hosts.ini` file:
+
+   ```bash
+   cp ../hosts.example.ini hosts.ini
+   ```
+
+- Edit the [`hosts.ini`](./hosts.ini) file:
+
+  ```ini
+  [deployment_host]
+  <host_name> ansible_host=<target_ip> ansible_user=<new_username> ansible_ssh_common_args='-o ForwardAgent=yes'
+  ```
+
+  - Replace `<host_name>` with the desired `hostname` of the remote machine
+  - Replace `<target_ip>` with the IP address or hostname of the target machine
+  - Under `deployment_host`, Replace `<ansible_user>` with the name of the user you have created
+
+- Verify that you are able to connect to the host using the following command:
+
+  ```bash
+  ansible all -m ping -i hosts.ini
+
+  # Expected output:
+
+  # <host_name> | SUCCESS => {
+  #  "ansible_facts": {
+  #      "discovered_interpreter_python": "/usr/bin/python3.10"
+  #  },
+  #  "changed": false,
+  #  "ping": "pong"
+  # }
+  ```
+
+- Run the `service-provider-setup.yml` ansible-playbook to:
+  - Create DNS records
+  - Deploy k8s
+  - Setup laconicd and laconic console
+  - Setup container registry
+  - Deploy the webapp-deployer API and webapp-deployer UI
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook service-provider-setup.yml -i hosts.ini --extra-vars='{ target_host: "deployment_host" }' --user $USER
+  ```
+
+### Result
+
+After the playbook finishes executing, the following services will be deployed (your setup should look similar to the example below):
+
+- laconicd chain RPC endpoint: <http://lcn-daemon.laconic.com:26657>
+- laconicd GQL endpoint: <http://lcn-daemon.laconic.com:9473/api>
+- laconic console: <http://lcn-console.laconic.com:8080/registry>
+- webapp deployer API: <https://webapp-deployer-api.pwa.laconic.com>
+- webapp deployer UI: <https://webapp-deployer-ui.pwa.laconic.com>
+
+## Cleanup
+
+Run the following steps on the target machine to stop the webapp-deployer, container-registry, fixturenet-laconicd and laconic-console-deployment, undeploy k8s, remove GPG keys and DNS records
+- Stop deployments
+
+  ```
+  $ laconic-so deployment --dir webapp-ui stop
+  $ laconic-so deployment --dir webapp-deployer
+  $ laconic-so deployment --dir container-registry stop
+  $ laconic-so deployment --dir laconic-console-deployment  stop --delete-volumes
+  $ laconic-so deployment --dir fixturenet-laconicd-deployment  stop --delete-volumes
+  ```
+
+- Remove deployment directories
+  ```
+  sudo rm -rf webapp-ui
+  sudo rm -rf webapp-deployer
+  sudo rm -rf container-registry
+  sudo rm -rf laconic-console-deployment
+  sudo rm -rf fixturenet-laconicd-deployment
+  ```
+
+- Remove spec files
+
+  ```
+  rm webapp-deployer.spec
+  rm container-registry.spec
+  rm laconic-console-spec.yml
+  rm fixturenet-laconicd-spec.yml
+  ```
+
+- Undeploy the k8s
+
+  ```
+  $ cd service-provider-template
+  $ export VAULT_KEY=<gpg_passphrase>
+  $ bash .vault/vault-rekey.sh
+  $ ansible-playbook -i hosts site.yml --tags=k8s --limit=<org_id>_<location_id> --user <user> --extra-vars 'k8s_action=destroy'
+  ```
+
+- Remove service-provider-template repo
+  ```
+  $ rm -rf service-provider-template
+  ```
+
+- Remove any existing GPG keys
+  ```
+  $ rm -rf gpg-keys/
+  $ gpg --list-secret-keys --keyid-format=long
+  /home/dev/.gnupg/pubring.kbx
+  ----------------------------
+  sec   rsa4096/DA9E3D638930A699 2024-10-15 [SCEA]
+        69A3200727091E72B773BBEBDA9E3D638930A699
+  uid                 [ultimate] deepstack <support@deepstacksoft.com>
+  ssb   rsa3072/2B5D80CF44753EFD 2024-10-15 [SEA]
+
+  sec   rsa3072/2449A62C838440AB 2024-10-15 [SC]
+        646A42164F978DC1415C11F12449A62C838440AB
+  uid                 [ultimate] webapp-deployer-api.deepstack.com
+  ssb   rsa3072/67576558A2F2FE91 2024-10-15 [E]
+
+  $ gpg --delete-secret-key 69A3200727091E72B773BBEBDA9E3D638930A699
+  $ gpg --delete-key 69A3200727091E72B773BBEBDA9E3D638930A699
+  $ gpg --delete-secret-key 646A42164F978DC1415C11F12449A62C838440AB
+  $ gpg --delete-key 646A42164F978DC1415C11F12449A62C838440AB
+  ```
+- Remove the user if required
+
+  ```bash
+  $ userdel <user>
+
+  # If required, kill process that is using the user
+  # userdel: user <user> is currently used by process 1639
+  # $ kill -9 1639
+  ```
+
+- Remove DNS records using DigitalOcean's API:
+  - <https://docs.digitalocean.com/reference/api/api-try-it-now/#/Domain%20Records/domains_delete_record>

service-provider-setup/deploy-backend.yml

@@ -0,0 +1,128 @@
+- name: Deploy webapp-deployer backend
+  hosts: "{{ target_host }}"
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+    KUBECONFIG: "{{ ansible_env.HOME }}/.kube/config-default.yaml"
+
+  vars_files:
+    - vars/webapp-vars.yml
+    - vars/container-vars.yml
+    - vars/k8s-vars.yml
+    - vars/dns-vars.yml
+    - vars/laconicd-vars.yml
+
+  tasks:
+    - name: Ensure gpg-keys directory exists
+      file:
+        path: ~/gpg-keys
+        state: directory
+        mode: '0700'
+
+    - name: Create a GPG key
+      shell: gpg --batch --passphrase "{{ deployer_gpg_passphrase }}" --quick-generate-key webapp-deployer-api.{{ full_domain }} default default never
+
+    - name: Export the public key
+      shell: gpg --export webapp-deployer-api.{{ full_domain }} > ~/gpg-keys/webapp-deployer-api.{{ full_domain }}.pgp.pub
+      args:
+        creates: ~/gpg-keys/webapp-deployer-api.{{ full_domain }}.pgp.pub
+
+    - name: Export the GPG private key with passphrase
+      shell: gpg --pinentry-mode=loopback --passphrase "{{ deployer_gpg_passphrase }}" --export-secret-keys webapp-deployer-api.{{ full_domain }} > ~/gpg-keys/webapp-deployer-api.{{ full_domain }}.pgp.key
+
+    - name: Setup repositories for webapp-deployer-backend
+      command: laconic-so --stack webapp-deployer-backend setup-repositories
+
+    - name: Build containers for webapp-deployer-backend
+      command: laconic-so --stack webapp-deployer-backend build-containers
+
+    - name: Ensure the config directory exists
+      file:
+        path: "{{ ansible_env.HOME }}/config"
+        state: directory
+
+    - name: Create laconic config file
+      template:
+        src: "./templates/laconic.yml.j2"
+        dest: "{{ ansible_env.HOME }}/config/laconic.yml"
+
+    - name: Copy the gpg private key file to config dir
+      copy:
+        src: "gpg-keys/webapp-deployer-api.{{ full_domain }}.pgp.key"
+        dest: "config"
+        remote_src: true
+
+    - name: Copy the gpg public key file to config dir
+      copy:
+        src: "gpg-keys/webapp-deployer-api.{{ full_domain }}.pgp.pub"
+        dest: "config"
+        remote_src: true
+
+    - name: Publish the webapp-deployer record using laconic-so
+      shell: |
+        docker run -i -t \
+          -v /home/{{ ansible_user }}/config:/home/root/config \
+          cerc/webapp-deployer-backend:local laconic-so publish-deployer-to-registry \
+            --laconic-config /home/root/config/laconic.yml \
+            --api-url https://webapp-deployer-api.pwa.{{ full_domain }} \
+            --public-key-file /home/root/config/webapp-deployer-api.{{ full_domain }}.pgp.pub \
+            --lrn lrn://{{ authority_name }}/deployers/webapp-deployer-api.pwa.{{ full_domain }} \
+            --min-required-payment 0
+      register: publish_output
+
+    - name: Display publish output
+      debug:
+        var: publish_output.stdout
+
+    - name: Generate spec file for webapp-deployer-backend
+      template:
+        src: "./templates/specs/webapp-deployer.spec.j2"
+        dest: "webapp-deployer.spec"
+
+    - name: Create deployment directory for webapp-deployer
+      command: >
+        laconic-so --stack webapp-deployer-backend deploy create
+        --deployment-dir webapp-deployer --spec-file webapp-deployer.spec
+
+    - name: Update config for webapp-deployer-backend
+      template:
+        src: "./templates/configs/webapp-deployer-config.env.j2"
+        dest: "webapp-deployer/config.env"
+
+    - name: Copy the kube config file to webapp-deployer directory
+      copy:
+        src: "{{ansible_env.HOME}}/.kube/config-default.yaml"
+        dest: "webapp-deployer/data/config/kube.yml"
+        remote_src: true
+
+    - name: Create laconic config file
+      template:
+        src: "./templates/laconic.yml.j2"
+        dest: "webapp-deployer/data/config/laconic.yml"
+
+    - name: login to the container registry
+      command: "docker login container-registry.pwa.{{ full_domain }} --username {{ container_registry_username }} --password {{ container_registry_password}}"
+
+    - name: Push images to container registry
+      command: laconic-so deployment --dir webapp-deployer push-images
+
+    - name: Start the webapp deployer
+      command: laconic-so deployment --dir webapp-deployer start
+
+    - name: Get the most recent pod for the deployment
+      shell: kubectl get pods --sort-by=.metadata.creationTimestamp -o jsonpath='{.items[-1].metadata.name}'
+      register: webapp_deployer_pod
+
+    - name: Set pod ID to a variable
+      set_fact:
+        pod_id: "{{ webapp_deployer_pod.stdout }}"
+
+    - name: Wait for the recent pod to be ready
+      command: kubectl wait --for=condition=Ready pod/{{ pod_id }} --timeout=300s
+      register: wait_result
+
+    - name: Copy gpg private key file to webapp deployer pod
+      shell: kubectl cp gpg-keys/webapp-deployer-api.{{ full_domain }}.pgp.key {{ pod_id }}:/app
+
+    - name: Copy gpg public key file to webapp deployer pod
+      shell: kubectl cp gpg-keys/webapp-deployer-api.{{ full_domain }}.pgp.pub {{ pod_id }}:/app

service-provider-setup/deploy-frontend.yml

@@ -0,0 +1,43 @@
+- name: Deploy webapp-deployer ui
+  hosts: "{{ target_host }}"
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  vars_files:
+    - vars/webapp-vars.yml
+    - vars/dns-vars.yml
+    - vars/k8s-vars.yml
+
+  tasks:
+    - name: Clone webapp-deployment-status-ui repository
+      git:
+        repo: "https://git.vdb.to/cerc-io/webapp-deployment-status-ui.git"
+        dest: "{{ ansible_env.HOME }}/cerc/webapp-deployment-status-ui"
+        update: yes
+
+    - name: Build webapp-deployer-status-ui
+      command: laconic-so build-webapp --source-repo {{ ansible_env.HOME }}/cerc/webapp-deployment-status-ui
+
+    - name: Create a deployment for webapp-ui
+      command: |
+        laconic-so deploy-webapp create --kube-config {{ ansible_env.HOME }}/.kube/config-default.yaml
+        --image-registry container-registry.pwa.{{ full_domain }} --deployment-dir webapp-ui
+        --image cerc/webapp-deployment-status-ui:local --url https://webapp-deployer-ui.pwa.{{ full_domain }}
+        --env-file ~/cerc/webapp-deployment-status-ui/.env
+
+    - name: Push webapp-ui images to container registry
+      command: laconic-so deployment --dir webapp-ui push-images
+
+    - name: Update config file for webapp ui
+      template:
+        src: "./templates/configs/webapp-ui-config.env.j2"
+        dest: "webapp-ui/config.env"
+
+    - name: Start the deployer ui
+      command: laconic-so deployment --dir webapp-ui start
+
+    - name: Create .out file
+      file:
+        path: "{{ ansible_env.HOME }}/.out"
+        state: touch

service-provider-setup/run-laconic-console.yml

@@ -0,0 +1,91 @@
+- name: Setup and run laconic console
+  hosts: "{{target_host}}"
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  vars_files:
+    - vars/webapp-vars.yml
+    - vars/dns-vars.yml
+    - vars/k8s-vars.yml
+    - vars/laconicd-vars.yml
+
+  tasks:
+    - name: Clone the stack repo
+      command: laconic-so fetch-stack git.vdb.to/cerc-io/testnet-laconicd-stack --pull
+      ignore_errors: yes
+
+    - name: Clone required repositories for laconic-console
+      command: laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console setup-repositories --pull
+
+    - name: Build container images
+      command: laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console build-containers --force-rebuild
+
+    - name: Generate spec file for laconic console deployment
+      template:
+        src: "./templates/specs/laconic-console-spec.yml.j2"
+        dest: "laconic-console-spec.yml"
+
+    - name: Check if the deployment directory exists
+      stat:
+        path: laconic-console-deployment
+      register: deployment_dir
+
+    - name: Create a deployment from the spec file
+      command: laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console deploy create --spec-file laconic-console-spec.yml --deployment-dir laconic-console-deployment
+      when: not deployment_dir.stat.exists
+
+    - name: Place deployment in the same namespace as fixturenet-laconicd
+      copy:
+        src: "fixturenet-laconicd-deployment/deployment.yml"
+        dest: "laconic-console-deployment/deployment.yml"
+        remote_src: yes
+
+    - name: Fetch user key from laconicd
+      command: laconic-so deployment --dir fixturenet-laconicd-deployment exec laconicd "echo y | laconicd keys export alice --unarmored-hex --unsafe"
+      register: alice_pk
+
+    - name: Set Private key for console deployment
+      set_fact:
+        ALICE_PK: "{{ alice_pk.stdout }}"
+
+    - name: Check if DNS resolves for daemon
+      command: getent ahosts {{ org_id }}-daemon.{{ full_domain }}
+      register: dns_check
+      retries: 5
+      delay: 5
+      until: dns_check.rc == 0
+      ignore_errors: yes
+
+    - name: Fail if DNS does not resolve after retries
+      fail:
+        msg: "DNS resolution failed for example.com after 5 retries"
+      when: dns_check.rc != 0
+
+    - name: Start the laconic console deployment
+      command: laconic-so deployment --dir laconic-console-deployment start
+
+    - name: Create a bond using cli
+      shell: laconic-so deployment --dir laconic-console-deployment exec cli "laconic registry bond create --type alnt --quantity 1000000000000 --user-key {{ALICE_PK}}" | jq -r '.bondId'
+      register: bond_id
+
+    - name: Set Bond ID for console deployment
+      set_fact:
+        BOND_ID: "{{ bond_id.stdout }}"
+
+    - name: Stop the console deployment
+      command: laconic-so deployment --dir laconic-console-deployment stop
+
+    - name: Modify the console config with alice_pk and bond_id
+      template:
+        src: "./templates/configs/console-config.env.j2"
+        dest: "laconic-console-deployment/config.env"
+
+    - name: Start the laconic console deployment with updated config
+      command: laconic-so deployment --dir laconic-console-deployment start
+
+    - name: Reserve an authority
+      command: laconic-so deployment --dir laconic-console-deployment exec cli "laconic registry authority reserve {{authority_name}}"
+
+    - name: Set authority using bond id
+      command: laconic-so deployment --dir laconic-console-deployment exec cli "laconic registry authority bond set {{authority_name}} {{BOND_ID}}"

service-provider-setup/run-laconicd.yml

@@ -0,0 +1,41 @@
+- name: Setup and run fixturnet-laconicd-stack
+  hosts: "{{ target_host }}"
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  vars_files:
+    - vars/laconicd-vars.yml
+
+  tasks:
+    - name: Clone the fixturenet-laconicd-stack repo
+      command: laconic-so fetch-stack git.vdb.to/cerc-io/fixturenet-laconicd-stack --pull
+      ignore_errors: yes
+
+    - name: Setup repos for fixturenet-laconicd
+      command: laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd setup-repositories
+
+    - name: Build container images
+      command: laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd build-containers --force-rebuild
+
+    - name: Generate spec file for laconicd deployment
+      template:
+        src: "./templates/specs/fixturenet-laconicd-spec.yml.j2"
+        dest: "fixturenet-laconicd-spec.yml"
+
+    - name: Check if the deployment directory exists
+      stat:
+        path: "fixturenet-laconicd-deployment"
+      register: deployment_dir
+
+    - name: Create the deployment from the spec file
+      command: laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd deploy create --spec-file fixturenet-laconicd-spec.yml --deployment-dir fixturenet-laconicd-deployment
+      when: not deployment_dir.stat.exists
+
+    - name: Create laconicd config
+      template:
+        src: "./templates/configs/laconicd-config.env.j2"
+        dest: "fixturenet-laconicd-deployment/config.env"
+
+    - name: Start the deployment
+      command: laconic-so deployment --dir fixturenet-laconicd-deployment start

service-provider-setup/service-provider-setup.yml

@@ -0,0 +1,20 @@
+- hosts: "{{ target_host }}"
+  tasks:
+    - name: Check if .out file exists
+      stat:
+        path: "{{ ansible_env.HOME }}/.out"
+      register: out_file
+
+    - name: Exit playbook if .out file exists
+      fail:
+        msg: ".out file exists, exiting playbook."
+      when: out_file.stat.exists
+
+- import_playbook: setup-dns.yml
+- import_playbook: setup-system.yml
+- import_playbook: setup-k8s.yml
+- import_playbook: setup-container-registry.yml
+- import_playbook: run-laconicd.yml
+- import_playbook: run-laconic-console.yml
+- import_playbook: deploy-backend.yml
+- import_playbook: deploy-frontend.yml

service-provider-setup/setup-container-registry.yml

@@ -0,0 +1,161 @@
+- name: Setup container registry
+  hosts: "{{ target_host }}"
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  vars_files:
+    - vars/k8s-vars.yml
+    - vars/container-vars.yml
+    - vars/dns-vars.yml
+
+  tasks:
+    - name: Generate spec file for the container-registry stack
+      template:
+        src: "./templates/specs/container-registry.spec.j2"
+        dest: "{{ansible_env.HOME}}/container-registry.spec"
+
+    - name: Create a deployment for the container-registry stack
+      command: laconic-so --stack container-registry deploy create --deployment-dir container-registry --spec-file container-registry.spec
+
+    - name: Base64 encode the container registry credentials
+      set_fact:
+        b64_encoded_cred: "{{ (container_registry_username + ':' + container_registry_password) | b64encode }}"
+
+    - name: Encrypt the container registry credentials to create an htpasswd file
+      command: >
+        htpasswd -bB -c container-registry/configmaps/config/htpasswd
+        {{ container_registry_username }} {{ container_registry_password }}
+      register: htpasswd_file
+
+    - name: Read the htpasswd file
+      slurp:
+        src: "container-registry/configmaps/config/htpasswd"
+      register: htpasswd_file_content
+
+    - name: Extract the hashed password (after the colon)
+      set_fact:
+        hashed_password: "{{ (htpasswd_file_content.content | b64decode).split(':')[1] | trim }}"
+
+    - name: Create container-registry/my_password.json file
+      template:
+        src: "./templates/my_password.json.j2"
+        dest: "container-registry/my_password.json"
+
+    - name: Configure the file container-registry/config.env
+      copy:
+        dest: "container-registry/config.env"
+        content: |
+          REGISTRY_AUTH=htpasswd
+          REGISTRY_AUTH_HTPASSWD_REALM="{{org_id}} Service Provider Image Registry"
+          REGISTRY_AUTH_HTPASSWD_PATH="/config/htpasswd"
+          REGISTRY_HTTP_SECRET='{{ hashed_password }}'
+
+    - name: Set KUBECONFIG environment variable
+      set_fact:
+        kubeconfig_path: "{{ ansible_env.HOME }}/.kube/config-default.yaml"
+
+    - name: Add the container registry credentials as a secret available to the cluster
+      command: >
+        kubectl create secret generic laconic-registry
+        --from-file=.dockerconfigjson=container-registry/my_password.json
+        --type=kubernetes.io/dockerconfigjson
+      environment:
+        KUBECONFIG: "{{ kubeconfig_path }}"
+
+    # TODO: Investigate why container registry throws error if started immediately
+    - name: Wait for 90 seconds
+      pause:
+        seconds: 90
+
+    - block:
+        - name: Get Kubernetes nodes with wide output
+          command: kubectl get nodes -o wide
+          environment:
+            KUBECONFIG: "{{ kubeconfig_path }}"
+          register: nodes_output
+
+        - name: Print output of 'kubectl get nodes -o wide'
+          debug:
+            var: nodes_output.stdout
+
+        - name: Get all secrets from all namespaces
+          command: kubectl get secrets --all-namespaces
+          environment:
+            KUBECONFIG: "{{ kubeconfig_path }}"
+          register: secrets_output
+
+        - name: Print output of 'kubectl get secrets --all-namespaces'
+          debug:
+            var: secrets_output.stdout
+
+        - name: Get cluster issuers
+          command: kubectl get clusterissuer
+          environment:
+            KUBECONFIG: "{{ kubeconfig_path }}"
+          register: clusterissuer_output
+
+        - name: Print output of 'kubectl get clusterissuer'
+          debug:
+            var: clusterissuer_output.stdout
+
+        - name: Get certificates
+          command: kubectl get certificates
+          environment:
+            KUBECONFIG: "{{ kubeconfig_path }}"
+          register: certificates_output
+
+        - name: Print output of 'kubectl get certificates'
+          debug:
+            var: certificates_output.stdout
+
+        - name: Get DaemonSets in all namespaces
+          command: kubectl get ds --all-namespaces
+          environment:
+            KUBECONFIG: "{{ kubeconfig_path }}"
+          register: daemonsets_output
+
+        - name: Print output of 'kubectl get ds --all-namespaces'
+          debug:
+            var: daemonsets_output.stdout
+
+      ignore_errors: yes
+
+    - name: Deploy the container registry
+      command: >
+        laconic-so deployment --dir container-registry start
+
+    - name: Get cluster_id from container-registry-deployment
+      slurp:
+        src: container-registry/deployment.yml
+      register: deployment_file
+
+    - name: Decode and extract cluster-id
+      set_fact:
+        extracted_cluster_id: "{{ deployment_file.content | b64decode | regex_search('cluster-id: (.+)', '\\1') }}"
+
+    - name: Set modified cluster-id
+      set_fact:
+        formatted_cluster_id: "{{ extracted_cluster_id | replace('[', '') | replace(']', '') | replace(\"'\", '') }}"
+
+    - name: Display the cluster ID
+      debug:
+        msg: "The cluster ID is: {{ formatted_cluster_id }}"
+
+    - name: Annotate ingress for proxy body size
+      command: >
+        kubectl annotate ingress {{ formatted_cluster_id }}-ingress nginx.ingress.kubernetes.io/proxy-body-size=0
+      environment:
+        KUBECONFIG: "{{ ansible_env.HOME }}/.kube/config-default.yaml"
+
+    - name: Annotate ingress for proxy read timeout
+      command: >
+        kubectl annotate ingress {{ formatted_cluster_id }}-ingress nginx.ingress.kubernetes.io/proxy-read-timeout=600
+      environment:
+        KUBECONFIG: "{{ ansible_env.HOME }}/.kube/config-default.yaml"
+
+    - name: Annotate ingress for proxy send timeout
+      command: >
+        kubectl annotate ingress {{ formatted_cluster_id }}-ingress nginx.ingress.kubernetes.io/proxy-send-timeout=600
+      environment:
+        KUBECONFIG: "{{ ansible_env.HOME }}/.kube/config-default.yaml"

service-provider-setup/setup-dns.yml

@@ -0,0 +1,122 @@
+- name: Configure DNS records
+  hosts: localhost
+
+  vars_files:
+    - vars/dns-vars.yml
+    - vars/k8s-vars.yml
+
+  tasks:
+    - name: Check if domain exists
+      community.digitalocean.digital_ocean_domain_facts:
+        oauth_token: "{{ do_api_token }}"
+      register: existing_domains
+
+    - name: Fail if domain already exists
+      fail:
+        msg: "Domain {{ full_domain }} already exists."
+      when: full_domain in existing_domains.data | map(attribute='name') | list
+
+    - name: Create a domain
+      community.digitalocean.digital_ocean_domain:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        name: "{{ full_domain }}"
+        ip: "{{ service_provider_ip }}"
+
+    - name: Create record for cluster control machine
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        domain: "{{ full_domain }}"
+        type: A
+        name: "{{ subdomain_prefix }}-cluster-control"
+        data: "{{ service_provider_ip }}"
+
+    - name: Create record for daemon machine
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        domain: "{{ full_domain }}"
+        type: A
+        name: "{{ org_id }}-daemon"
+        data: "{{ service_provider_ip }}"
+
+    - name: Create CNAME record for www
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        data: "{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        name: www
+        ttl: 43200
+
+    - name: Create CNAME record for subdomain
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        data: "{{ subdomain_cluster_control }}.{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        name: "{{ subdomain_prefix }}"
+        ttl: 43200
+
+    - name: Create CNAME record for laconicd endpoint
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        data: "{{ org_id }}-daemon.{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        name: "laconicd"
+        ttl: 43200
+
+    - name: Create CNAME record for backend
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        data: "{{ org_id }}-daemon.{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        name: "{{ org_id }}-backend"
+        ttl: 43200
+
+    - name: Create CNAME record for console
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        data: "{{ org_id }}-daemon.{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        name: "{{ org_id }}-console"
+        ttl: 43200
+
+    - name: Create wildcard CNAME record for subdomain
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        name: "*.{{ subdomain_prefix }}"
+        data: "{{ subdomain_prefix }}-cluster-control.{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        ttl: 43200
+
+    - name: Create CNAME record for pwa
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        name: "pwa"
+        data: "{{ subdomain_prefix }}-cluster-control.{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        ttl: 43200
+
+    - name: Create wildcard CNAME record for pwa
+      community.digitalocean.digital_ocean_domain_record:
+        state: present
+        oauth_token: "{{ do_api_token }}"
+        name: "*.pwa"
+        data: "{{ subdomain_prefix }}-cluster-control.{{ full_domain }}"
+        domain: "{{ full_domain }}"
+        type: CNAME
+        ttl: 43200

service-provider-setup/setup-k8s.yml

@@ -0,0 +1,185 @@
+- name: Install Stack Orchestrator if it isn't present
+  import_playbook: ../stack-orchestrator-setup/setup-laconic-so.yml
+
+- name: Setup k8s
+  hosts: "{{ target_host }}"
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/.local/bin"
+    VAULT_KEY: "{{ vault_passphrase }}"
+
+  vars_files:
+    - vars/dns-vars.yml
+    - vars/gpg-vars.yml
+    - vars/k8s-vars.yml
+
+  tasks:
+    - name: Install Python and pip
+      apt:
+        name: "{{ item }}"
+        state: present
+      become: yes
+      loop:
+        - python3
+        - python3-pip
+
+    - name: Add user to docker group
+      user:
+        name: "{{ ansible_user }}"
+        groups: docker
+        append: true
+      become: yes
+
+    - name: Install Ansible on remote host
+      pip:
+        name: ansible
+        extra_args: --user
+      when: target_host != "localhost"
+
+    - name: Ensure ~/.local/bin is in PATH in .bashrc
+      lineinfile:
+        path: ~/.bashrc
+        line: 'export PATH="$HOME/.local/bin:$PATH"'
+        state: present
+        create: yes
+
+    - name: Ensure ~/.local/bin is in PATH in .zshrc
+      lineinfile:
+        path: ~/.zshrc
+        line: 'export PATH="$HOME/.local/bin:$PATH"'
+        state: present
+        create: yes
+
+    - name: Clone the service provider template repo
+      git:
+        repo: "https://git.vdb.to/cerc-io/service-provider-template.git"
+        dest: "{{ ansible_env.HOME }}/service-provider-template"
+
+    - name: Update .vault/vault-keys file
+      lineinfile:
+        path: "service-provider-template/.vault/vault-keys"
+        regexp: '^.*$'
+        line: "{{ gpg_key_id }}"
+        create: yes
+
+    - name: Start GPG agent
+      command: gpg-agent --daemon
+      ignore_errors: yes
+
+    # Cache GPG passphrase by signing a dummy string to avoid passphrase prompts in later steps
+    - name: Sign a dummy string using gpg-key
+      shell: echo "This is a dummy string." | gpg --batch --yes --local-user "{{ gpg_key_id }}" --passphrase "{{ vault_passphrase }}" --pinentry-mode loopback --sign -
+
+    - name: Run vault-rekey.sh
+      shell: bash .vault/vault-rekey.sh
+      args:
+        chdir: "service-provider-template"
+      register: rekey_result
+      until: rekey_result.stderr == ""
+      retries: 5
+      delay: 5
+
+    - name: Ensure the target directory exists
+      file:
+        path: "{{ ansible_env.HOME }}/service-provider-template"
+        state: directory
+        mode: '0755'
+
+    - name: Change directory name in group_vars
+      command: mv lcn_cad {{ org_id }}_{{ location_id }}
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template/group_vars"
+
+    - name: Change control directory name in host_vars
+      command: mv lcn-cad-cluster-control {{ org_id }}-{{ location_id }}-cluster-control
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template/host_vars"
+
+    - name: Change daemon directory name in host_vars
+      command: mv lcn-daemon {{ org_id }}-daemon
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template/host_vars"
+
+    - name: Copy control-firewalld.yml to the remote VM
+      template:
+        src: ./templates/control-firewalld.yml.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/host_vars/{{ org_id }}-{{ location_id }}-cluster-control/firewalld.yml"
+
+    - name: Copy daemon-firewalld.yml to the remote VM
+      template:
+        src: ./templates/daemon-firewalld.yml.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/host_vars/{{ org_id }}-daemon/firewalld.yml"
+
+    - name: Copy nginx.yml to the remote VM
+      template:
+        src: ./templates/nginx.yml.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/host_vars/{{ org_id }}-daemon/nginx.yml"
+
+    - name: Copy hosts file to the remote VM
+      template:
+        src: ./templates/hosts.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/hosts"
+
+    - name: Copy k8s.yml to the remote VM
+      template:
+        src: ./templates/k8s.yml.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/group_vars/{{ org_id }}_{{ location_id }}/k8s.yml"
+
+    - name: Copy wildcard template to the remote VM
+      template:
+        src: ./templates/wildcard-pwa-example.yml.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/files/manifests/wildcard-pwa-{{ full_domain | replace('.', '-') }}.yaml"
+
+    - name: Delete old wildcard-pwa file
+      file:
+        path: "{{ ansible_env.HOME }}/service-provider-template/files/manifests/wildcard-pwa-laconic.yaml"
+        state: absent
+
+    - name: Install required ansible roles
+      shell: ansible-galaxy install -f -p roles -r roles/requirements.yml
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template"
+
+    - name: Install Kubernetes helper tools
+      shell: ./roles/k8s/files/scripts/get-kube-tools.sh
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template"
+      become: yes
+
+    - name: Update group_vars/all/vault.yml with support email using template
+      template:
+        src: ./templates/vault.yml.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/group_vars/all/vault.yml"
+
+    - name: Base64 encode DigitalOcean token
+      set_fact:
+        b64_encoded_token: "{{ do_api_token | b64encode }}"
+
+    - name: Update secret-digitalocean-dns.yaml with encoded token
+      template:
+        src: ./templates/secret-digitalocean-dns.yml.j2
+        dest: "{{ ansible_env.HOME }}/service-provider-template/files/manifests/secret-digitalocean-dns.yaml"
+      vars:
+        b64_encoded_token: "{{ b64_encoded_token }}"
+
+    - name: Remove k8s-vault.yml file
+      file:
+        path: "{{ ansible_env.HOME }}/service-provider-template/group_vars/{{ org_id }}_{{ location_id }}/k8s-vault.yml"
+        state: absent
+
+    - name: Generate token for the cluster
+      command: ./roles/k8s/files/scripts/token-vault.sh ./group_vars/{{ org_id }}_{{ location_id }}/k8s-vault.yml
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template"
+
+    - name: Configure firewalld and nginx
+      command: ansible-playbook -i hosts site.yml --tags=firewalld,nginx
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template"
+      environment:
+        ANSIBLE_HOST_KEY_CHECKING: "False"
+
+    - name: Deploy Kubernetes
+      command: ansible-playbook -i hosts site.yml --tags=k8s --limit={{ org_id }}_{{ location_id }} --user {{ ansible_user }}
+      args:
+        chdir: "{{ ansible_env.HOME }}/service-provider-template"

service-provider-setup/setup-system.yml

@@ -0,0 +1,137 @@
+- name: Setup system for the service provider setup
+  hosts: "{{ target_host }}"
+
+  environment:
+    GNUPGHOME: /home/{{ ansible_user }}/.gnupg
+
+  vars_files:
+    - vars/k8s-vars.yml
+    - vars/dns-vars.yml
+    - vars/gpg-vars.yml
+
+  tasks:
+    - name: Install required packages
+      apt:
+        name:
+          - doas
+          - zsh
+          - tmux
+          - git
+          - jq
+          - acl
+          - curl
+          - wget
+          - netcat-traditional
+          - fping
+          - rsync
+          - htop
+          - iotop
+          - iftop
+          - tar
+          - less
+          - firewalld
+          - sshguard
+          - wireguard
+          - iproute2
+          - iperf3
+          - zfsutils-linux
+          - net-tools
+          - ca-certificates
+          - gnupg
+          - sshpass
+          - apache2-utils
+        state: latest
+        update_cache: true
+      become: yes
+
+    - name: Set unique hostname
+      hostname:
+        name: "{{ inventory_hostname }}"
+      when: ansible_hostname != inventory_hostname
+      become: yes
+
+    - name: Verify status of firewalld and enable sshguard
+      systemd:
+        name: "{{ item }}"
+        enabled: yes
+        state: started
+      loop:
+        - firewalld
+        - sshguard
+      ignore_errors: yes
+
+    - name: Disable and remove snapd
+      block:
+        - name: Disable snapd services
+          systemd:
+            name: "{{ item }}"
+            enabled: no
+            state: stopped
+          loop:
+            - snapd.service
+            - snapd.socket
+            - snapd.seeded
+            - snapd.snap-repair.timer
+          ignore_errors: yes
+          become: yes
+
+        - name: Purge snapd
+          apt:
+            name: snapd
+            state: absent
+          become: yes
+
+        - name: Remove snap directories
+          file:
+            path: "{{ item }}"
+            state: absent
+          loop:
+            - "{{ ansible_env.HOME }}/snap"
+            - /snap
+            - /var/snap
+            - /var/lib/snapd
+          become: yes
+          ignore_errors: yes
+
+    - name: Ensure GPG directory exists
+      file:
+        path: "{{ ansible_env.HOME }}/.gnupg"
+        state: directory
+        mode: '0700'
+
+    - name: Create GPG key parameters file
+      copy:
+        dest: /tmp/gpg_key_params.txt
+        content: |
+          Key-Type: RSA
+          Key-Length: 4096
+          Subkey-Type: RSA
+          Name-Real: {{ gpg_user_name }}
+          Name-Email: {{ gpg_user_email }}
+          Expire-Date: 0
+          Passphrase: {{ gpg_passphrase }}
+          %no-protection
+          %commit
+        mode: '0600'
+
+    - name: Generate GPG key using the parameter file
+      command: gpg --batch --gen-key /tmp/gpg_key_params.txt
+      become_user: "{{ ansible_user }}"
+      register: gpg_keygen_output
+      ignore_errors: yes
+
+    - name: Show GPG key generation output
+      debug:
+        var: gpg_keygen_output.stdout
+
+    - name: Fetch the Key ID of the most recently created GPG key
+      shell: gpg --list-secret-keys --keyid-format=long | grep 'sec' | tail -n 1 | awk -F'/' '{print $2}' | awk '{print $1}'
+      register: gpg_key_output
+
+    - name: Set the GPG key ID to a variable
+      set_fact:
+        sec_key_id: "{{ gpg_key_output.stdout }}"
+
+    - name: Show GPG Key ID
+      debug:
+        msg: "GPG Key ID: {{ sec_key_id }}"

service-provider-setup/templates/configs/console-config.env.j2

@@ -0,0 +1,6 @@
+CERC_LACONICD_USER_KEY={{ALICE_PK}}
+CERC_LACONICD_BOND_ID={{BOND_ID}}
+CERC_LACONICD_RPC_ENDPOINT=http://{{ org_id }}-daemon.{{ full_domain }}:26657
+CERC_LACONICD_GQL_ENDPOINT=http://{{ org_id }}-daemon.{{ full_domain }}:9473/api
+CERC_LACONICD_CHAIN_ID={{ chain_id }}
+LACONIC_HOSTED_ENDPOINT=http://{{ org_id }}-daemon.{{ full_domain }}:9473

service-provider-setup/templates/configs/laconicd-config.env.j2

@@ -0,0 +1 @@
+CHAINID={{ chain_id }}

service-provider-setup/templates/configs/webapp-deployer-config.env.j2

@@ -0,0 +1,30 @@
+DEPLOYMENT_DNS_SUFFIX="pwa.{{ full_domain }}"
+
+# Name of reserved authority
+DEPLOYMENT_RECORD_NAMESPACE="{{ authority_name }}"
+
+# url of the deployed docker image registry
+IMAGE_REGISTRY="container-registry.pwa.{{ full_domain }}"
+
+# htpasswd credentials
+IMAGE_REGISTRY_USER="{{ container_registry_username }}"
+IMAGE_REGISTRY_CREDS="{{ container_registry_password }}"
+
+# configs
+CLEAN_DEPLOYMENTS=false
+CLEAN_LOGS=false
+CLEAN_CONTAINERS=false
+SYSTEM_PRUNE=false
+WEBAPP_IMAGE_PRUNE=true
+CHECK_INTERVAL=5
+FQDN_POLICY="allow"
+
+# lrn of the webapp deployer
+LRN="lrn://{{ authority_name }}/deployers/webapp-deployer-api.pwa.{{ full_domain }}"
+export OPENPGP_PRIVATE_KEY_FILE="webapp-deployer-api.{{ full_domain }}.pgp.key"
+export OPENPGP_PASSPHRASE="{{ deployer_gpg_passphrase }}"
+export DEPLOYER_STATE="srv-test/deployments/autodeploy.state"
+export UNDEPLOYER_STATE="srv-test/deployments/autoundeploy.state"
+export UPLOAD_DIRECTORY="srv-test/uploads"
+export HANDLE_AUCTION_REQUESTS={{ handle_auction_requests }}
+export AUCTION_BID_AMOUNT={{ auction_bid_amount }}

service-provider-setup/templates/configs/webapp-ui-config.env.j2

@@ -0,0 +1,3 @@
+CERC_WEBAPP_DEBUG=0.1.0
+LACONIC_HOSTED_CONFIG_app_api_url=https://webapp-deployer-api.pwa.{{ full_domain }}
+LACONIC_HOSTED_CONFIG_app_console_link=http://{{ org_id }}-daemon.{{ full_domain }}:9473/console?query=%0A%20%20fragment%20ValueParts%20on%20Value%20%7B%0A%20%20%20%20...%20on%20BooleanValue%20%7B%0A%20%20%20%20%20%20bool%3A%20value%0A%20%20%20%20%7D%0A%20%20%20%20...%20on%20IntValue%20%7B%0A%20%20%20%20%20%20int%3A%20value%0A%20%20%20%20%7D%0A%20%20%20%20...%20on%20FloatValue%20%7B%0A%20%20%20%20%20%20float%3A%20value%0A%20%20%20%20%7D%0A%20%20%20%20...%20on%20StringValue%20%7B%0A%20%20%20%20%20%20string%3A%20value%0A%20%20%20%20%7D%0A%20%20%20%20...%20on%20BytesValue%20%7B%0A%20%20%20%20%20%20bytes%3A%20value%0A%20%20%20%20%7D%0A%20%20%20%20...%20on%20LinkValue%20%7B%0A%20%20%20%20%20%20link%3A%20value%0A%20%20%20%20%7D%0A%20%20%7D%0A%0A%20%20fragment%20AttrParts%20on%20Attribute%20%7B%0A%20%20%20%20key%0A%20%20%20%20value%20%7B%0A%20%20%20%20%20%20...ValueParts%0A%20%20%20%20%20%20...%20on%20ArrayValue%20%7B%0A%20%20%20%20%20%20%20%20value%20%7B%0A%20%20%20%20%20%20%20%20%20%20...ValueParts%0A%20%20%20%20%20%20%20%20%7D%0A%20%20%20%20%20%20%7D%0A%20%20%20%20%7D%0A%20%20%7D%0A%0A%20%20%7B%0A%20%20%20%20getRecordsByIds(ids%3A%20%5B%22#RQID#%22%5D)%20%7B%0A%20%20%20%20%20%20id%0A%20%20%20%20%20%20names%0A%20%20%20%20%20%20bondId%0A%20%20%20%20%20%20createTime%0A%20%20%20%20%20%20expiryTime%0A%20%20%20%20%20%20owners%0A%20%20%20%20%20%20attributes%20%7B%0A%20%20%20%20%20%20%20%20...AttrParts%0A%20%20%20%20%20%20%20%20value%20%7B%0A%20%20%20%20%20%20%20%20%20%20...%20on%20MapValue%20%7B%0A%20%20%20%20%20%20%20%20%20%20%20%20map%3A%20value%20%7B%0A%20%20%20%20%20%20%20%20%20%20%20%20%20%20...AttrParts%0A%20%20%20%20%20%20%20%20%20%20%20%20%7D%0A%20%20%20%20%20%20%20%20%20%20%7D%0A%20%20%20%20%20%20%20%20%7D%0A%20%20%20%20%20%20%7D%0A%20%20%20%20%7D%0A%20%20%7D%0A

service-provider-setup/templates/control-firewalld.yml.j2

@@ -0,0 +1,16 @@
+---
+firewalld_add:
+  - name: public
+    interfaces:
+      - enp9s0
+    services:
+      - http
+      - https
+    ports:
+      - 6443/tcp
+
+  - name: trusted
+    sources:
+      - 10.42.0.0/16
+      - 10.43.0.0/16
+      - {{ service_provider_ip }}

service-provider-setup/templates/daemon-firewalld.yml.j2

@@ -0,0 +1,16 @@
+---
+firewalld_add:
+  - name: public
+    interfaces:
+      - ens3
+    services:
+      - http
+      - https
+    ports:
+      - 26657/tcp
+      - 26656/tcp
+      - 1317/tcp
+
+  - name: trusted
+    sources:
+      - {{ service_provider_ip }}

service-provider-setup/templates/hosts.j2

@@ -0,0 +1,12 @@
+[all]
+{{ org_id }}-daemon ansible_host={{ service_provider_ip }}
+{{ org_id }}-{{ location_id }}-cluster-control ansible_host={{ service_provider_ip }}
+
+[so]
+{{ org_id }}-daemon
+
+[{{ org_id }}_{{ location_id }}]
+{{ org_id }}-{{ location_id }}-cluster-control k8s_node_type=bootstrap k8s_pod_limit=1024 k8s_external_ip={{ service_provider_ip }}
+
+[k8s:children]
+{{ org_id }}_{{ location_id }}

service-provider-setup/templates/k8s.yml.j2

@@ -0,0 +1,55 @@
+---
+# default context is used for stack orchestrator deployments, for testing a custom context name can be usefull
+#k8s_cluster_name: {{ org_id }}-{{ location_id }}-cluster
+k8s_cluster_name: default
+k8s_cluster_url: {{ org_id }}-{{ location_id }}-cluster-control.{{ full_domain }}
+k8s_taint_servers: false
+
+k8s_acme_email: "{{ support_email }}"
+
+# k3s bundles traefik as the default ingress controller, we will disable it and use nginx instead
+k8s_disable:
+  - traefik
+
+# secrets can be stored in a file or as a template, the template secrets gets dynamically base64 encoded while file based secrets must be encoded by hand
+k8s_secrets:
+  - name: digitalocean-dns
+    type: file
+    source: secret-digitalocean-dns.yaml
+
+k8s_manifests:
+  # ingress controller, replaces traefik which is explicitly disabled
+  - name: ingress-nginx
+    type: url
+    source: https://raw.githubusercontent.com/kubernetes/ingress-nginx/controller-v1.10.1/deploy/static/provider/cloud/deploy.yaml
+
+  # cert-manager, required for letsencrypt
+  - name: cert-manager
+    type: url
+    source: https://github.com/cert-manager/cert-manager/releases/download/v1.15.1/cert-manager.yaml
+
+  # issuer for basic http certs
+  - name: letsencrypt-prod
+    type: template
+    source: shared/clusterissuer-acme.yaml
+    server: https://acme-v02.api.letsencrypt.org/directory
+    solvers:
+      - type: http
+        ingress: nginx
+
+  # issuer for wildcard dns certs
+  - name: letsencrypt-prod-wild
+    type: template
+    source: shared/clusterissuer-acme.yaml
+    server: https://acme-v02.api.letsencrypt.org/directory
+    solvers:
+      - type: dns
+        provider: digitalocean
+        tokenref: tokenSecretRef
+        secret_name: digitalocean-dns
+        secret_key: access-token
+
+  # initiate wildcard cert
+  - name: pwa.{{ full_domain }}
+    type: file
+    source: wildcard-pwa-{{ full_domain | replace('.', '-') }}.yaml

service-provider-setup/templates/laconic.yml.j2

@@ -0,0 +1,9 @@
+services:
+  registry:
+    rpcEndpoint: 'http://{{ org_id }}-daemon.{{ full_domain }}:26657'
+    gqlEndpoint: 'http://{{ org_id }}-daemon.{{ full_domain }}:9473/api'
+    userKey: "{{ ALICE_PK }}"
+    bondId: "{{ BOND_ID }}"
+    chainId: {{ chain_id }}
+    gas: 200000
+    fees: 200000alnt

service-provider-setup/templates/my_password.json.j2

@@ -0,0 +1,9 @@
+{
+  "auths": {
+    "{{container_registry_domain}}": {
+      "username": "{{ container_registry_username }}",
+      "password": "{{ hashed_password }}",
+      "auth": "{{ b64_encoded_cred }}"
+    }
+  }
+}

service-provider-setup/templates/nginx.yml.j2

@@ -0,0 +1,21 @@
+---
+nginx_packages_intall: false
+nginx_server_name_hash: 64
+nginx_proxy_read_timeout: 1200
+nginx_proxy_send_timeout: 1200
+nginx_proxy_connection_timeout: 75
+
+nginx_sites:
+  - name: {{ org_id }}-console
+    url: {{ org_id }}-console.{{ full_domain }}
+    upstream: http://localhost:8080
+    template: basic-proxy
+    ssl: true
+
+  - name: {{ org_id }}-daemon
+    url: {{ org_id }}-daemon.{{ full_domain }}
+    upstream: http://localhost:9473
+    configs:
+      - rewrite ^/deployer(/.*)? https://webapp-deployer.pwa.{{full_domain}} permanent
+    template: websocket-proxy
+    ssl: true

service-provider-setup/templates/secret-digitalocean-dns.yml.j2

@@ -0,0 +1,12 @@
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: cert-manager
+---
+apiVersion: v1
+data:
+  access-token: {{ b64_encoded_token }}
+kind: Secret
+metadata:
+  name: digitalocean-dns
+  namespace: cert-manager

service-provider-setup/templates/specs/container-registry.spec.j2

@@ -0,0 +1,16 @@
+stack: container-registry
+deploy-to: k8s
+kube-config: /home/{{ ansible_user }}/.kube/config-default.yaml
+network:
+  ports:
+    registry:
+     - '5000'
+  http-proxy:
+    - host-name: container-registry.pwa.{{full_domain}}
+      routes:
+        - path: '/'
+          proxy-to: registry:5000
+volumes:
+  registry-data:
+configmaps:
+  config: ./configmaps/config

service-provider-setup/templates/specs/fixturenet-laconicd-spec.yml.j2

@@ -0,0 +1,15 @@
+stack:
+  /home/{{ansible_user}}/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd
+deploy-to: compose
+network:
+  ports:
+    laconicd:
+     - '6060:6060'
+     - '26657:26657'
+     - '26656:26656'
+     - '9473:9473'
+     - '9090:9090'
+     - '1317:1317'
+volumes:
+  laconicd-data: ./data/laconicd-data
+  genesis-config: ./data/genesis-config

service-provider-setup/templates/specs/laconic-console-spec.yml.j2

@@ -0,0 +1,9 @@
+stack:
+  /home/{{ansible_user}}/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console
+deploy-to: compose
+network:
+  ports:
+    console:
+     - '8080:80'
+volumes:
+  laconic-registry-data: ./data/laconic-registry-data

service-provider-setup/templates/specs/webapp-deployer.spec.j2

@@ -0,0 +1,35 @@
+stack: webapp-deployer-backend
+deploy-to: k8s
+kube-config: {{ansible_env.HOME}}/.kube/config-default.yaml
+image-registry: container-registry.pwa.{{full_domain}}/laconic-registry
+network:
+  ports:
+    server:
+      - '9555'
+  http-proxy:
+    - host-name: webapp-deployer-api.pwa.{{ full_domain }}
+      routes:
+        - path: '/'
+          proxy-to: server:9555
+volumes:
+  srv:
+configmaps:
+  config: ./data/config
+annotations:
+  container.apparmor.security.beta.kubernetes.io/{name}: unconfined
+labels:
+  container.kubeaudit.io/{name}.allow-disabled-apparmor: "podman"
+security:
+  privileged: true
+
+resources:
+  containers:
+    reservations:
+      cpus: {{ cpu_reservation }}
+      memory: {{ memory_reservation }}
+    limits:
+      cpus: {{ cpu_limit }}
+      memory: {{ memory_limit }}
+  volumes:
+    reservations:
+      storage: 200G

service-provider-setup/templates/vault.yml.j2

@@ -0,0 +1,2 @@
+---
+support_email: {{ support_email }}

service-provider-setup/templates/wildcard-pwa-example.yml.j2

@@ -0,0 +1,15 @@
+apiVersion: cert-manager.io/v1
+kind: Certificate
+metadata:
+  name: pwa.{{ full_domain }}
+  namespace: default
+spec:
+  secretName: pwa.{{ full_domain }}
+  issuerRef:
+    name: letsencrypt-prod-wild
+    kind: ClusterIssuer
+    group: cert-manager.io
+  commonName: "*.pwa.{{ full_domain }}"
+  dnsNames:
+    - "pwa.{{ full_domain }}"
+    - "*.pwa.{{ full_domain }}"

service-provider-setup/vars/container-vars.example.yml

@@ -0,0 +1,3 @@
+container_registry_username: ""
+container_registry_password: ""
+container_registry_domain: "container-registry.pwa.{{ full_domain }}"

service-provider-setup/vars/dns-vars.example.yml

@@ -0,0 +1,5 @@
+full_domain: ""
+subdomain_prefix: "{{ org_id }}-{{ location_id }}"
+subdomain_cluster_control: "{{ subdomain_prefix }}-cluster-control"
+service_provider_ip: ""
+do_api_token: ""

service-provider-setup/vars/gpg-vars.example.yml

@@ -0,0 +1,3 @@
+gpg_user_name: ""
+gpg_user_email: ""
+gpg_passphrase: ""

service-provider-setup/vars/k8s-vars.example.yml

@@ -0,0 +1,6 @@
+gpg_key_id: "{{ sec_key_id }}"
+vault_passphrase: "{{ gpg_passphrase }}"
+org_id: ""
+location_id: ""
+support_email: ""
+ansible_ssh_extra_args: '-o StrictHostKeyChecking=no'

service-provider-setup/vars/laconicd-vars.example.yml

@@ -0,0 +1 @@
+chain_id: "laconic_9000-1"

service-provider-setup/vars/webapp-vars.example.yml

@@ -0,0 +1,10 @@
+ALICE_PK: "{{ ALICE_PK }}"
+BOND_ID: "{{ BOND_ID }}"
+authority_name: ""
+cpu_reservation: "1"
+memory_reservation: "2G"
+cpu_limit: "6"
+memory_limit: "8G"
+deployer_gpg_passphrase: ""
+handle_auction_requests: "true"
+auction_bid_amount: "500000"

stack-orchestrator-setup/.gitignore

@@ -0,0 +1 @@
+hosts.ini

stack-orchestrator-setup/README.md

@@ -0,0 +1,94 @@
+# stack-orchestrator-setup
+
+## Prerequisites
+
+- Setup Ansible: To get started, follow the [installation](../README.md#installation) guide to setup ansible on your machine.
+
+- Setup user with passwordless sudo: Follow steps from [Setup a user](../user-setup/README.md#setup-a-user) to setup a new user with passwordless sudo
+
+## Setup Stack Orchestrator
+
+This playbook will install Docker and Stack Orchestrator (laconic-so) on the machine if they aren't already present.
+
+Run the following commands in the [`stack-orchestrator-setup`](./) directory.
+
+- Create a new `hosts.ini` file:
+
+   ```bash
+   cp ../hosts.example.ini hosts.ini
+   ```
+
+- Edit the [`hosts.ini`](./hosts.ini) file to run the playbook on a remote machine:
+
+  ```ini
+  [deployment_host]
+  <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
+  ```
+
+  - Replace `<host_name>` with the alias of your choice
+  - Replace `<target_ip>` with the IP address or hostname of the target machine
+  - Replace `<ssh_user>` with the username of the user that you set up on target machine (e.g. dev, ubuntu)
+
+- Verify that you are able to connect to the host using the following command
+
+  ```bash
+  ansible all -m ping -i hosts.ini
+
+  # Expected output:
+
+  # <host_name> | SUCCESS => {
+  #  "ansible_facts": {
+  #      "discovered_interpreter_python": "/usr/bin/python3.10"
+  #  },
+  #  "changed": false,
+  #  "ping": "pong"
+  # }
+  ```
+
+- Execute the `setup-laconic-so.yml` Ansible playbook for setting up stack orchestrator and docker on the target machine:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook setup-laconic-so.yml  -i hosts.ini  --extra-vars='{ "target_host": "deployment_host"}' --user $USER
+  ```
+
+## Verify Installation
+
+Run the following commands on your target machine:
+
+- After the installation is complete, verify if `$HOME/bin` is already included in the `PATH` by running:
+
+  ```bash
+  echo $PATH | grep -q "$HOME/bin" && echo "$HOME/bin is already in PATH" || echo "$HOME/bin is not in PATH"
+  ```
+  If the command outputs `"$HOME/bin is not in PATH"`, you'll need to add it to your `PATH`.
+
+  - To add `$HOME/bin` to your `PATH`, run the following command:
+
+    ```bash
+    export PATH="$HOME/bin:$PATH"
+    ```
+
+  - To make this change permanent, add the following line to your shell configuration file (`~/.bashrc` or `~/.zshrc`, depending on your shell):
+
+    ```bash
+    # For bash users
+    echo 'export PATH="$HOME/bin:$PATH"' >> ~/.bashrc
+    source ~/.bashrc
+
+    # For zsh users
+    echo 'export PATH="$HOME/bin:$PATH"' >> ~/.zshrc
+    source ~/.zshrc
+    ```
+
+- Once the PATH is set, verify the installation by running the following commands:
+
+  ```bash
+  # Check version of docker
+  docker --version
+
+  # Check version of docker compose
+  docker compose version
+
+  # Check version of Stack Orchestrator
+  laconic-so version
+  ```

stack-orchestrator-setup/setup-docker.yml

@@ -0,0 +1,91 @@
+- name: Set up Docker
+  hosts: "{{ target_host }}"
+  become: yes
+
+  vars:
+    target_host: "localhost"
+    docker_gpg_key_url: "https://download.docker.com/linux/ubuntu/gpg"
+    docker_gpg_key_path: "/etc/apt/keyrings/docker.asc"
+
+  tasks:
+    - name: Check if Docker is installed
+      command: which docker
+      register: is_docker_present
+      ignore_errors: yes
+
+    - block:
+        - name: Exit if docker is present
+          debug:
+            msg: "Docker already on host, ending play"
+        - meta: end_play
+      when: is_docker_present.rc == 0
+
+    - name: Update apt cache
+      apt:
+        update_cache: yes
+
+    - name: Install prerequisites
+      apt:
+        name:
+          - ca-certificates
+          - curl
+        state: present
+
+    - name: Ensure keyrings directory exists
+      file:
+        path: "/etc/apt/keyrings"
+        state: directory
+        mode: '0755'
+
+    - name: Download Docker GPG key
+      get_url:
+        url: "{{ docker_gpg_key_url }}"
+        dest: "{{ docker_gpg_key_path }}"
+        mode: '0644'
+
+    - name: Get system architecture
+      shell: dpkg --print-architecture
+      register: system_arch
+
+    - name: Add Docker repository
+      apt_repository:
+        repo: "deb [arch={{ system_arch.stdout }} signed-by={{ docker_gpg_key_path }}] https://download.docker.com/linux/ubuntu {{ ansible_lsb.codename }} stable"
+        state: present
+        filename: docker
+
+    - name: Update apt cache
+      apt:
+        update_cache: yes
+
+    - name: Install Docker packages
+      apt:
+        name:
+          - docker-ce
+          - docker-ce-cli
+          - containerd.io
+          - docker-buildx-plugin
+          - docker-compose-plugin
+        state: latest
+      notify: Restart Docker
+
+    - name: Add user to docker group
+      user:
+        name: "{{ ansible_user }}"
+        groups: docker
+        append: true
+
+    - name: Verify Docker installation by running the hello world image
+      command: docker run hello-world
+      register: hello_world_output
+      ignore_errors: true
+      become: no
+
+    - name: Display hello-world output
+      debug:
+        var: hello_world_output.stdout_lines
+
+  handlers:
+    - name: Restart Docker
+      service:
+        name: docker
+        state: restarted

stack-orchestrator-setup/setup-laconic-so.yml

@@ -0,0 +1,57 @@
+- name: Install Docker if it isn't present
+  import_playbook: setup-docker.yml
+
+- name: Set up Stack Orchestrator
+  hosts: "{{ target_host }}"
+
+  vars:
+    target_host: "localhost"
+
+  environment:
+    PATH: "{{ ansible_env.PATH }}:/home/{{ansible_user}}/bin"
+
+  tasks:
+    - name: Check if Stack Orchestrator is installed
+      shell: which laconic-so
+      register: is_so_present
+      ignore_errors: yes
+
+    - block:
+        - name: Exit if Stack Orchestrator is present
+          debug:
+            msg: "Stack Orchestrator already on host, ending play"
+        - meta: end_play
+      when: is_so_present.rc == 0
+
+    - name: Install jq
+      apt:
+        name: jq
+        state: present
+        update_cache: yes
+      become: yes
+
+    - name: Ensure that directory ~/bin exists and is writable
+      file:
+        path: "{{ ansible_env.HOME }}/bin"
+        state: directory
+        mode: '0755'
+
+    - name: Download the laconic-so binary
+      get_url:
+          url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
+          dest: "{{ ansible_env.HOME }}/bin/laconic-so"
+          mode: '0755'
+          force: yes
+
+    - name: Ensure ~/.laconic-so directory exists
+      file:
+        path: "{{ ansible_env.HOME }}/.laconic-so"
+        state: directory
+        mode: '0755'
+
+    - name: Save the distribution url to ~/.laconic-so directory
+      copy:
+        dest: "{{ ansible_env.HOME }}/.laconic-so/config.yml"
+        content: |
+          distribution-url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
+        mode: '0644'

user-setup/.gitignore

@@ -0,0 +1 @@
+user-vars.yml

user-setup/README.md

@@ -0,0 +1,75 @@
+# user-setup
+
+## Prerequisites
+
+- Setup Ansible: follow the [installation](../README.md#installation) guide to setup ansible on your machine.
+
+- Setup a remote machine with passwordless SSH login for the root user
+
+- Install `passlib` used for handling encrypted passwords when setting up a user
+
+  ```bash
+  pip install passlib
+  ```
+
+## Setup a user
+
+Execute the following commands in the `user-setup` directory
+
+- Create a new `hosts.ini` file:
+
+   ```bash
+   cp ../hosts.example.ini hosts.ini
+   ```
+
+- Edit the [`hosts.ini`](./hosts.ini) file:
+
+  ```ini
+  [deployment_host]
+  <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
+  ```
+
+  - Replace `<host_name>` with the desired `hostname` of the remote machine
+  - Replace `<target_ip>` with the IP address or hostname of the target machine
+  - Replace `<ssh_user>` with `root`
+
+- Verify that you are able to connect to the host using the following command:
+
+  ```bash
+  ansible all -m ping -i hosts.ini
+
+  # Expected output:
+
+  # <host_name> | SUCCESS => {
+  #  "ansible_facts": {
+  #      "discovered_interpreter_python": "/usr/bin/python3.10"
+  #  },
+  #  "changed": false,
+  #  "ping": "pong"
+  # }
+  ```
+
+- Setup `user-vars.yml`  using the example file
+
+  ```bash
+  cp user-vars.example.yml user-vars.yml
+  ```
+
+- Edit the `user-vars.yml` file:
+
+  ```bash
+  # name of the user you want to setup on the target host
+  username: ""
+
+  # password of the user you want to setup on the target host
+  password: ""
+
+  # path to the ssh key on your machine, eg: "/home/user/.ssh/id_rsa.pub"
+  path_to_ssh_key: ""
+  ```
+
+- Execute the `setup-user.yml` Ansible playbook to create a user with passwordless sudo permissions:
+
+  ```bash
+  LANG=en_US.utf8 ansible-playbook setup-user.yml -i hosts.ini
+  ```

user-setup/setup-user.yml

@@ -0,0 +1,46 @@
+- name: Configure system
+  hosts: deployment_host
+  become: yes
+
+  vars_files:
+    - user-vars.yml
+
+  tasks:
+    - name: Create a user
+      user:
+        name: "{{ username }}"
+        password: "{{ '{{ password }}' | password_hash('sha512') }}"
+        shell: /bin/bash
+        state: present
+
+    - name: Add user to sudoers group
+      user:
+        name: "{{ username }}"
+        groups: sudo
+        append: yes
+
+    - name: Ensure .ssh directory exists for user
+      file:
+        path: /home/{{ username }}/.ssh
+        state: directory
+        owner: "{{ username }}"
+        group: "{{ username }}"
+        mode: '0700'
+
+    - name: Append SSH public key to authorized_keys
+      lineinfile:
+        path: /home/{{ username }}/.ssh/authorized_keys
+        line: "{{ lookup('file', path_to_ssh_key) }}"
+        create: yes
+        owner: "{{ username }}"
+        group: "{{ username }}"
+        mode: '0600'
+        state: present
+
+    - name: Add user to sudoers for passwordless sudo
+      lineinfile:
+        path: /etc/sudoers
+        state: present
+        regexp: '^{{ username }} ALL=\(ALL\) NOPASSWD:ALL'
+        line: '{{ username }} ALL=(ALL) NOPASSWD:ALL'
+        validate: 'visudo -cf %s'

user-setup/user-vars.example.yml

@@ -0,0 +1,3 @@
+username: ""
+password: ""
+path_to_ssh_key: ""