Add step to check logs of onboarding-app

testnet-onboarding-demo.md

@@ -2,8 +2,17 @@
 
 ## Setup
 
+### Stack Orchestrator
+
+- Follow these steps to install laconic-so: <https://git.vdb.to/cerc-io/stack-orchestrator#install>
+
 ### Laconic Wallet
 
+- The `laconic-wallet` can be installed using an APK on an Android device or run as a website using `laconic-wallet-web`
+- Follow one of the following (`Setup On Android` or `Setup As Website`) sections as desired
+
+#### Setup On Android
+
 - Install laconic wallet using [latest APK release](https://git.vdb.to/cerc-io/laconic-wallet/releases)
 
   - Download the APK file in latest release `laconic-wallet-debug.apk`
@@ -12,6 +21,8 @@
 
     - It will need third party installation permission to install the APK
 
+  OR
+
 - (Optional) Build laconic wallet from source by following the steps below
 
   - Follow the [Install](https://git.vdb.to/cerc-io/laconic-wallet#install) steps from the laconic-wallet README to setup Android Studio
@@ -53,48 +64,139 @@
     cd ../
     ```
 
-### Testnet Onboarding App
+#### Setup As Website
 
-- Clone the repository
+- Use the hosted `laconic-wallet-web` at <https://wallet.laconic.com>
+
+  OR
+
+- (Optional) Setup the `laconic-wallet-web` stack
+
+  - Clone the stack repo:
 
     ```bash
-  git clone git@git.vdb.to:cerc-io/testnet-onboarding-app.git
+    laconic-so fetch-stack git.vdb.to/cerc-io/laconic-wallet-web
     ```
 
-- Enter the project directory
+  - Build the container image:
 
     ```bash
-  cd testnet-onboarding-app
+    laconic-so --stack ~/cerc/laconic-wallet-web/stack/stack-orchestrator/stack/laconic-wallet-web build-containers
     ```
 
-- Setup .env
-  - Copy and update `.env`
+  - Create a spec file for the deployment:
 
     ```bash
-    cp .env.example .env
+    laconic-so --stack ~/cerc/laconic-wallet-web/stack/stack-orchestrator/stack/laconic-wallet-web deploy init --output laconic-wallet-web-spec.yml
     ```
 
-  - In the `.env` file, add the  WalletConnect project ID used in your [laconic-wallet](https://git.vdb.to/cerc-io/laconic-wallet) setup.
+  - Edit `network` in the spec file to map container ports to host ports as required:
 
     ```bash
-    WALLET_CONNECT_PROJECT_ID=39bc93c...
+    network:
+      ports:
+        laconic-wallet-web:
+          - '5000:80'
     ```
 
-- Install dependencies
+  - Create a deployment from the spec file:
 
     ```bash
-  yarn
+    laconic-so --stack ~/cerc/laconic-wallet-web/stack/stack-orchestrator/stack/laconic-wallet-web deploy create --spec-file laconic-wallet-web-spec.yml --deployment-dir laconic-wallet-web-deployment
     ```
 
-- Exit project repo
+  - Inside the `laconic-wallet-web-deployment/config.env` file, set your wallet connect ProjectId:
 
     ```bash
-  cd ../
+    WALLET_CONNECT_ID=39bc93c...
     ```
 
-### Stack Orchestrator
+### Testnet Onboarding App and Onboarding API Stacks
 
-- Follow these steps to install laconic-so: <https://git.vdb.to/cerc-io/stack-orchestrator#install>
+- For running the onboarding API, create sumsub application token from <https://cockpit.sumsub.com>
+
+- Clone the stack repo:
+
+  ```bash
+  laconic-so fetch-stack git.vdb.to/cerc-io/testnet-onboarding-app-stack
+  ```
+
+- Setup required repositories:
+
+  ```bash
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app setup-repositories --pull
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-api setup-repositories --pull
+  ```
+
+- Build the container image:
+
+  ```bash
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app build-containers --force-rebuild
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-api build-containers --force-rebuild
+  ```
+
+- Create spec files for deployments, which will map the stack's ports to the host:
+
+  ```bash
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app deploy init --output onboarding-app-spec.yml
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-api deploy init --output onboarding-api-spec.yml
+  ```
+
+- Configure ports:
+
+  - `onboarding-app-spec.yml`:
+
+    ```bash
+    network:
+      ports:
+        testnet-onboarding-app:
+          - '3000:80'
+    ```
+
+  - `onboarding-api-spec.yml`:
+
+    ```bash
+    network:
+      ports:
+        testnet-onboarding-api:
+          - '3001:3000'
+    ```
+
+- Create deployments:
+
+  ```bash
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app deploy create --spec-file onboarding-app-spec.yml --deployment-dir onboarding-app-deployment
+
+  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-api deploy create --spec-file onboarding-api-spec.yml --deployment-dir onboarding-api-deployment
+  ```
+
+- Env configuration:
+
+  - Set the required variables:
+
+    ```bash
+    # WalletConnect project ID
+    export WALLET_CONNECT_ID=
+
+    # Your sumsub application token
+    export SUMSUB_APP_TOKEN=
+
+    # Your sumsub secret key
+    export SUMSUB_SECRET_KEY=
+    ```
+
+  - Set the env config for app and api deployments:
+
+    ```bash
+    cat <<EOF > onboarding-app-deployment/config.env
+    WALLET_CONNECT_ID=$WALLET_CONNECT_ID
+    EOF
+
+    cat <<EOF > onboarding-api-deployment/config.env
+    SUMSUB_APP_TOKEN=$SUMSUB_APP_TOKEN
+    SUMSUB_SECRET_KEY=$SUMSUB_SECRET_KEY
+    EOF
+    ```
 
 ### fixturenet-laconicd and laconic-faucet Stacks
 
@@ -325,7 +427,7 @@
     ```
 
 - Create a deployment spec-file for Alice's L1 nitro-node:
-  - Create spec files for the deployment:
+  - Create spec file for the deployment:
 
     ```bash
     laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy init --output l1alice-nitro-spec.yml
@@ -363,7 +465,7 @@
     ```
 
 - Create a deployment spec-file for Alice's L2 nitro-node:
-  - Create spec files for the deployment:
+  - Create spec file for the deployment:
 
     ```bash
     laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy init --output l2alice-nitro-spec.yml
@@ -413,10 +515,10 @@
 
     - Check status of L1
 
-      - Run command in intervals of 3 seconds to check if new blocks are created
+      - Run status check:
 
         ```bash
-        laconic-so deployment --dir fixturenet-eth-deployment exec foundry "cast block-number"
+        laconic-so deployment --dir fixturenet-eth-deployment exec fixturenet-eth-bootnode-lighthouse "/scripts/status-internal.sh"
         ```
 
       - Check geth logs to ensure that new blocks are getting created
@@ -433,7 +535,13 @@
 
     NOTE: The `fixturenet-optimism-contracts` service will configure and deploy the Optimism contracts to L1, exiting when complete. This may take several minutes; you can follow the progress by following the container's logs
 
-    - Check L2 logs
+    - Follow optimism contracts deployment logs:
+
+      ```bash
+      laconic-so deployment --dir fixturenet-optimism-deployment logs -f fixturenet-optimism-contracts
+      ```
+
+    - Check L2 logs:
 
       ```bash
       laconic-so deployment --dir fixturenet-optimism-deployment logs -f op-geth
@@ -530,17 +638,28 @@
     laconic-so deployment --dir bridge-deployment exec nitro-contracts "cd packages/nitro-protocol && yarn hardhat transfer --contract $L1_ASSET_ADDRESS --to $C_CHAIN_ADDRESS --amount 1000 --network geth"
     ```
 
-- Start testnet-onboarding-app (run command in testnet-onboarding-app repo)
+- Start `onboarding-app` and `onboarding-api` deployments (run where deployments are created):
 
   ```bash
-  # In testnet-onboarding-app
-  yarn start
+  # Builds and serves the app
+  laconic-so deployment --dir onboarding-app-deployment start
+
+  # Serves the API to generate access tokens
+  laconic-so deployment --dir onboarding-api-deployment start
   ```
 
-  NOTE: Ignore source map warnings in the terminal
+  Check the logs of the onboarding-app
+  ```bash
+  docker ps | grep testnet-onboarding-app
+  ```
+
+  Once the container is healthy, the `testnet-onboarding-app` will be accessible at <http://localhost:3000>
 
 - Run Laconic Wallet
 
+  - Follow the steps to `Run on Android` or `Run as a website` as per the chosen setup
+
+  - Run on Android:
     - Connect your phone with the PC (Make sure that USB debugging is enabled on your phone)
 
     - Setup port forwarding for your device using the following command:
@@ -555,6 +674,8 @@
 
     - Open Laconic Wallet app that was installed from the APK
 
+      OR
+
     - (Optional) Start `laconic-wallet` android app (run steps in laconic-wallet repo)
 
       - Set up the Android device
@@ -570,21 +691,23 @@
 
       - Press `a` to run the application on android and wait till the wallet app opens up on your phone
 
-## Demo
+    OR
 
-- In laconic-wallet app, click on `Create wallet` and add laconicd chain using `Add network` button:
+  - Run as a website:
+    - Open `laconic-wallet-web` at <https://wallet.laconic.com>
+
+      OR
+
+    - (Optional) Run the `laconic-wallet-web` stack:
 
       ```bash
-  Network type - `COSMOS`
-  Chain ID - `laconic_9000-1`
-  Network name - `laconicd`
-  New RPC URL - `http://127.0.0.1:26657`
-  Coin Type - `118`
-  Native Denom - `alnt`
-  Address Prefix - `laconic`
-  Gas Price - `1`
+      laconic-so deployment --dir laconic-wallet-web-deployment start
       ```
 
+      Open `laconic-wallet-web` at <http://localhost:5000>
+
+## Demo
+
 - Start the stack for stage 0 laconicd (run command in directory where stage0-deployment had been created)
 
   ```bash
@@ -594,6 +717,14 @@
   laconic-so deployment --dir stage0-deployment logs laconicd -f
   ```
 
+- In laconic-wallet, click on `Create wallet` and update the `laconicd` network using `Edit Network` button:
+
+  ```bash
+  Network name    - laconicd
+  New RPC URL     - http://127.0.0.1:26657
+  Gas Price       - 1
+  ```
+
 - Run laconic-faucet:
 
   - Get private key of funded faucet account from stage 0 laconicd chain:
@@ -628,7 +759,7 @@
     export BRIDGE_ADDRESS=$(laconic-so deployment --dir bridge-deployment exec nitro-bridge "jq -r '.\"42069\"[0].contracts.Bridge.address' /app/deployment/nitro-addresses.json")
     ```
 
-- In the wallet, add 2 accounts (Alice and Charlie) for both the networks (ethereum and laconicd) by selecting the network and clicking on `Add account`
+- In the wallet, add 2 accounts (Alice and Charlie) for both the networks (`Ethereum` and `laconicd`) by selecting the network and clicking on `Add account`
 
 - Get Ethereum private keys for accounts Alice and Charlie from wallet using the `Show private key` link (to be used as statechannel PKs)
 
@@ -861,14 +992,21 @@
 
 - Onboard participants
   - Open the `testnet-onboarding-app` at <http://localhost:3000>
-  - Connect to the testnet-onboarding app by clicking on the WalletConnect icon on the top right corner in the wallet and scanning QR code of the app
-  - Choose Alice's nitro and laconicd account to onboard
+  - Read and accept the `Terms and Conditions`
+  - Connect testnet-onboarding app to the wallet:
+    - Click on `CONNECT WALLET` button on the testnet-onboarding app
+    - Click on the WalletConnect icon on the top right corner in the wallet
+      - If using the wallet Android app, scan the QR code from the onboarding app
+      - If using the wallet website, enter WalletConnect URI for pairing
+  - In the onboarding app, choose Alice's nitro and laconicd account to onboard
     - Use nitro accounts for which ledger channels have been created on L2
   - Sign using the nitro key
     - Approve sign request on Wallet
-  - Fund the laconic account by clicking on the `REQUEST TOKENS FROM FAUCET` button
-  - Send transaction request to the Wallet
-    - Approve and send transaction to laconicd chain
+  - Perform the user verification steps
+  - Select the desired participant role (`Validator` or `Participant`) and accept the onboarding terms and conditions
+  - In the next step, fund your laconic account by clicking on the `REQUEST TOKENS FROM FAUCET` button; ensure that the displayed balance is updated
+  - Send transaction request to the wallet
+    - From wallet, approve and send transaction to laconicd chain
   - Repeat onboarding for other (Charlies's) account by clicking on the web app header "Testnet Onboarding"
   - List the participants on stage 1 (run in the directory where laconicd deployment was  created):
 
@@ -892,13 +1030,16 @@
   - Use the scripts in fixturenet-laconicd stack to generate genesis file for stage 1 with token allocations:
 
     ```bash
+    # Set current working dir path in a variable
+    DEPLOYMENTS_DIR=$(pwd)
+
     cd ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd
 
     # Fetch account holdings from bridge
-    ./scripts/fetch-account-holdings.sh <bridge-deployment-absolute-path> eth-account-holdings.json
+    ./scripts/fetch-account-holdings.sh $DEPLOYMENTS_DIR/bridge-deployment eth-account-holdings.json
 
     # Generate the genesis file
-    ./scripts/generate-stage1-genesis.sh <stage0-deployment-absolute-path> eth-account-holdings.json
+    ./scripts/generate-stage1-genesis.sh $DEPLOYMENTS_DIR/stage0-deployment eth-account-holdings.json
 
     # Expected output:
     # Genesis file for stage1 written to output/genesis.json
@@ -986,7 +1127,7 @@
   #   ID: '0xb29aeb32c9495a793ebf7bd116232075d1e7bfe89fc82281c7d498e3ffd3e3bf',
   #   Status: 'Open',
   #   Balance: {
-  #     AssetAddress: '<Token address on L2>',
+  #     AssetAddress: '0x0000000000000000000000000000000000000000',
   #     Payee: '0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0',
   #     Payer: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
   #     PaidSoFar: 0n,
@@ -1128,7 +1269,27 @@
 - Reset wallet and stop the app:
   - In laconic-wallet, click on the `Reset Wallet` button to disconnect all apps and clear the accounts
 
-  - Stop (`Ctrl+C`) both `laconic-wallet` and `testnet-onboarding-app`
+  - Stop (`Ctrl+C`) the `laconic-wallet` if running locally in dev mode
+
+  - Stop and cleanup the `laconic-wallet-web` deployment:
+
+    ```bash
+    # Run where deployments are created
+    laconic-so deployment --dir laconic-wallet-web-deployment stop
+
+    sudo rm -rf laconic-wallet-web-deployment
+    ```
+
+  - Stop and cleanup the `onboarding-app` and `onboarding-api` deployments:
+
+    ```bash
+    # Run where deployments are created
+    laconic-so deployment --dir onboarding-app-deployment stop
+    laconic-so deployment --dir onboarding-api-deployment stop
+
+    sudo rm -rf onboarding-app-deployment
+    sudo rm -rf onboarding-api-deployment
+    ```
 
 - Clean up stage 0 and stage 1 laconicd deployments:
   - Stop deployment and remove volumes: