WIP: Adjust runtime envsubst

Rename workflow file
Update .gitea/workflows/triggers/test-database
2024-02-15 21:05:43 -06:00 · 2024-02-15 07:39:04 -07:00 · 2024-02-15 14:35:56 +00:00 · 2024-02-15 05:26:29 +00:00 · 2024-02-15 05:00:51 +00:00 · 2024-02-14 23:50:09 +00:00
664 changed files with 43399 additions and 2007 deletions
@@ -6,6 +6,8 @@ on:
    paths:
      - '!**'
      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,8 +21,16 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
      - name: "Print Python version"
@@ -19,7 +19,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -0,0 +1,48 @@
+name: Fixturenet-Laconicd-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-laconicd-test'
+  schedule:
+    - cron: '1 13 * * *'
+
+jobs:
+  test:
+    name: "Run an Laconicd fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Update'
+        run: apt-get update
+      - name: 'Setup jq'
+        run: apt-get install jq -y
+      - name: 'Check jq'
+        run: |
+          which jq
+          jq --version
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
@@ -0,0 +1,21 @@
+name: Lint Checks
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run linter"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name : "Run flake8"
+        uses: py-actions/flake8@v2
@@ -20,7 +20,15 @@ jobs:
        run: |
          build_tag=$(./scripts/create_build_tag_file.sh)
          echo "build-tag=v${build_tag}" >> $GITHUB_OUTPUT
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -0,0 +1,52 @@
+name: Database Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-database'
+      - '.gitea/workflows/test-database.yml'
+      - 'tests/database/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '5 18 * * *'
+
+jobs:
+  test:
+    name: "Run database hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run database deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/database/run-test.sh
+
@@ -21,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -0,0 +1,54 @@
+name: K8s Deploy Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-k8s-deploy'
+      - '.gitea/workflows/test-k8s-deploy.yml'
+      - 'tests/k8s-deploy/run-deploy-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '3 15 * * *'
+
+jobs:
+  test:
+    name: "Run deploy test suite on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run k8s deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/k8s-deploy/run-deploy-test.sh
+
@@ -0,0 +1,51 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches:
+      - main
+      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Install wget" # 20240109 - Only needed until the executors are updated.
+        run: apt update && apt install -y wget
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh
@@ -21,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -40,3 +48,4 @@ jobs:
      - name: "Run smoke tests"
        run: ./tests/smoke-test/run-smoke-test.sh

+
@@ -1 +1,3 @@
 Change this file to trigger running the fixturenet-eth-plugeth-test CI job
+trigger
+trigger
@@ -1 +1,2 @@
 Change this file to trigger running the fixturenet-eth-test CI job
+
@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+Trigger
+Trigger
@@ -0,0 +1,2 @@
+Change this file to trigger running the test-database CI job
+Trigger test run
@@ -0,0 +1,2 @@
+Change this file to trigger running the test-k8s-deploy CI job
+Trigger test on PR branch
@@ -0,0 +1,30 @@
+name: Fixturenet-Eth Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-eth-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-eth test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth/run-test.sh
@@ -0,0 +1,30 @@
+name: Fixturenet-Laconicd Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-laconicd-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-laconicd test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
@@ -0,0 +1,29 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+
@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
+trigger
@@ -6,5 +6,5 @@ laconic_stack_orchestrator.egg-info
 __pycache__
 *~
 package
-app/data/build_tag.txt
-build
+stack_orchestrator/data/build_tag.txt
+/build
@@ -29,10 +29,10 @@ chmod +x ~/.docker/cli-plugins/docker-compose
 Next decide on a directory where you would like to put the stack-orchestrator program. Typically this would be 
 a "user" binary directory such as `~/bin` or perhaps `/usr/local/laconic` or possibly just the current working directory.

-Now, having selected that directory, download the latest release from [this page](https://github.com/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
+Now, having selected that directory, download the latest release from [this page](https://git.vdb.to/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:

 ```bash
-curl -L -o ~/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+curl -L -o ~/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 ```

 Give it execute permissions:
@@ -52,7 +52,7 @@ Version: 1.1.0-7a607c2-202304260513
 Save the distribution url to `~/.laconic-so/config.yml`:
 ```bash
 mkdir ~/.laconic-so
-echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml"
+echo "distribution-url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so" >  ~/.laconic-so/config.yml
 ```

 ### Update
@@ -64,12 +64,12 @@ laconic-so update

 ## Usage

-The various [stacks](/app/data/stacks) each contain instructions for running different stacks based on your use case. For example:
+The various [stacks](/stack_orchestrator/data/stacks) each contain instructions for running different stacks based on your use case. For example:

- [self-hosted Gitea](/app/data/stacks/build-support)
- [an Optimism Fixturenet](/app/data/stacks/fixturenet-optimism)
- [laconicd with console and CLI](app/data/stacks/fixturenet-laconic-loaded)
- [kubo (IPFS)](app/data/stacks/kubo)
+- [self-hosted Gitea](/stack_orchestrator/data/stacks/build-support)
+- [an Optimism Fixturenet](/stack_orchestrator/data/stacks/fixturenet-optimism)
+- [laconicd with console and CLI](stack_orchestrator/data/stacks/fixturenet-laconic-loaded)
+- [kubo (IPFS)](stack_orchestrator/data/stacks/kubo)

 ## Contributing

@@ -1,143 +0,0 @@
-# Copyright © 2022, 2023 Vulcanize
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-# Builds or pulls containers for the system components
-
-# env vars:
-# CERC_REPO_BASE_DIR defaults to ~/cerc
-
-# TODO: display the available list of containers; allow re-build of either all or specific containers
-
-import os
-import sys
-from decouple import config
-import subprocess
-import click
-import importlib.resources
-from pathlib import Path
-from app.util import include_exclude_check, get_parsed_stack_config
-from app.base import get_npm_registry_url
-
-# TODO: find a place for this
-#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
-
-
-@click.command()
-@click.option('--include', help="only build these containers")
-@click.option('--exclude', help="don\'t build these containers")
-@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
-@click.option("--extra-build-args", help="Supply extra arguments to build")
-@click.pass_context
-def command(ctx, include, exclude, force_rebuild, extra_build_args):
-    '''build the set of containers required for a complete stack'''
-
-    quiet = ctx.obj.quiet
-    verbose = ctx.obj.verbose
-    dry_run = ctx.obj.dry_run
-    debug = ctx.obj.debug
-    local_stack = ctx.obj.local_stack
-    stack = ctx.obj.stack
-    continue_on_error = ctx.obj.continue_on_error
-
-    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    container_build_dir = Path(__file__).absolute().parent.joinpath("data", "container-build")
-
-    if local_stack:
-        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
-    else:
-        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
-
-    if not quiet:
-        print(f'Dev Root is: {dev_root_path}')
-
-    if not os.path.isdir(dev_root_path):
-        print('Dev root directory doesn\'t exist, creating')
-
-    # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
-    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
-        all_containers = container_list_file.read().splitlines()
-
-    containers_in_scope = []
-    if stack:
-        stack_config = get_parsed_stack_config(stack)
-        containers_in_scope = stack_config['containers']
-    else:
-        containers_in_scope = all_containers
-
-    if verbose:
-        print(f'Containers: {containers_in_scope}')
-        if stack:
-            print(f"Stack: {stack}")
-
-    # TODO: make this configurable
-    container_build_env = {
-        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
-        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
-        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
-        "CERC_REPO_BASE_DIR": dev_root_path,
-        "CERC_CONTAINER_BASE_DIR": container_build_dir,
-        "CERC_HOST_UID": f"{os.getuid()}",
-        "CERC_HOST_GID": f"{os.getgid()}",
-        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
-    }
-    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
-    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
-    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
-    docker_host_env = os.getenv("DOCKER_HOST")
-    if docker_host_env:
-        container_build_env.update({"DOCKER_HOST": docker_host_env})
-
-    def process_container(container):
-        if not quiet:
-            print(f"Building: {container}")
-        build_dir = os.path.join(container_build_dir, container.replace("/", "-"))
-        build_script_filename = os.path.join(build_dir, "build.sh")
-        if verbose:
-            print(f"Build script filename: {build_script_filename}")
-        if os.path.exists(build_script_filename):
-            build_command = build_script_filename
-        else:
-            if verbose:
-                print(f"No script file found: {build_script_filename}, using default build script")
-            repo_dir = container.split('/')[1]
-            # TODO: make this less of a hack -- should be specified in some metadata somewhere
-            # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
-            repo_full_path = os.path.join(dev_root_path, repo_dir)
-            repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
-            build_command = os.path.join(container_build_dir, "default-build.sh") + f" {container}:local {repo_dir_or_build_dir}"
-        if not dry_run:
-            if verbose:
-                print(f"Executing: {build_command} with environment: {container_build_env}")
-            build_result = subprocess.run(build_command, shell=True, env=container_build_env)
-            if verbose:
-                print(f"Return code is: {build_result.returncode}")
-            if build_result.returncode != 0:
-                print(f"Error running build for {container}")
-                if not continue_on_error:
-                    print("FATAL Error: container build failed and --continue-on-error not set, exiting")
-                    sys.exit(1)
-                else:
-                    print("****** Container Build Error, continuing because --continue-on-error is set")
-        else:
-            print("Skipped")
-
-    for container in containers_in_scope:
-        if include_exclude_check(container, include, exclude):
-            process_container(container)
-        else:
-            if verbose:
-                print(f"Excluding: {container}")
@@ -1,13 +0,0 @@
-version: "3.2"
-# See: https://docs.ipfs.tech/install/run-ipfs-inside-docker/#set-up
-services:
-  ipfs:
-    image: ipfs/kubo:master-2023-02-20-714a968
-    restart: always
-    volumes:
-      - ./ipfs/import:/import
-      - ./ipfs/data:/data/ipfs
-    ports:
-      - "0.0.0.0:8080:8080"
-      - "0.0.0.0:4001:4001"
-      - "0.0.0.0:5001:5001"
@@ -1,27 +0,0 @@
-version: '3.7'
-
-services:
-  nitro-reverse-payment-proxy:
-    image: cerc/go-nitro:local
-    hostname: nitro-reverse-payment-proxy
-    restart: on-failure
-    depends_on:
-      # Wait for the go-nitro node to start
-      go-nitro:
-        condition: service_healthy
-    environment:
-      CERC_PROXY_ADDRESS: 0.0.0.0:8081
-      CERC_PROXY_NITRO_ENDPOINT: ${CERC_PROXY_NITRO_ENDPOINT:-go-nitro:4005/api/v1}
-      CERC_PROXY_DESTINATION_URL: ${CERC_PROXY_DESTINATION_URL:-http://ipld-eth-server:8081}
-      CERC_PROXY_COST_PER_BYTE: ${CERC_PROXY_COST_PER_BYTE:-1}
-    entrypoint: ["bash", "-c", "/app/run-reverse-payment-proxy.sh"]
-    volumes:
-      - ../config/go-nitro/run-reverse-payment-proxy.sh:/app/run-reverse-payment-proxy.sh
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "8081"]
-      interval: 10s
-      timeout: 5s
-      retries: 10
-      start_period: 10s
-    ports:
-      - "8081:8081"
@@ -1,63 +0,0 @@
-version: '3.7'
-
-services:
-  ponder-app-indexer:
-    hostname: ponder-app-indexer
-    restart: unless-stopped
-    image: cerc/ponder:local
-    working_dir: /app/examples/token-erc20
-    environment:
-      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
-      CERC_PONDER_RPC_URL_1: ${PONDER_RPC_URL_1:-http://nitro-reverse-payment-proxy:8081}
-      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK:-58368d20ff12f17669c06158c21d885897aa56f9be430edc789614bf9851d53f}
-      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK:-fb1e9af328c283ca3e2486e7c24d13582b7912057d8b9542ff41503c85bc05c0}
-      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
-      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
-      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE}
-      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/go-nitro/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
-      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-5000}
-    command: ["bash", "./ponder-start.sh"]
-    volumes:
-      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
-      - ../config/ponder/ponder.indexer.config.ts:/app/examples/token-erc20/ponder.config.ts
-      - peers_ids:/peers
-      - nitro_deployment:/nitro
-      - ponder_indexer_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
-    ports:
-      - "42070"
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  ponder-app-watcher:
-    hostname: ponder-app-watcher
-    depends_on:
-      - ponder-app-indexer
-    restart: unless-stopped
-    image: cerc/ponder:local
-    working_dir: /app/examples/token-erc20
-    environment:
-      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
-      CERC_PONDER_NITRO_PK: ${CERC_PONDER_WATCHER_NITRO_PK:-febb3b74b0b52d0976f6571d555f4ac8b91c308dfa25c7b58d1e6a7c3f50c781}
-      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_WATCHER_NITRO_CHAIN_PK:-be4aa664815ea3bc3d63118649a733f6c96b243744310806ecb6d96359ab62cf}
-      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
-      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
-      CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer:42070/graphql}
-      CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d}
-      CERC_INDEXER_NITRO_PAY_AMOUNT: ${CERC_INDEXER_NITRO_PAY_AMOUNT:-50}
-    command: ["bash", "./ponder-start.sh"]
-    volumes:
-      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
-      - ../config/ponder/ponder.watcher.config.ts:/app/examples/token-erc20/ponder.config.ts
-      - peers_ids:/peers
-      - nitro_deployment:/nitro
-      - ponder_watcher_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
-    ports:
-      - "42069"
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-volumes:
-  peers_ids:
-  nitro_deployment:
-  ponder_indexer_nitro_data:
-  ponder_watcher_nitro_data:
@@ -1,118 +0,0 @@
-#!/bin/bash
-
-# TODO: this file is now an unmodified copy of cerc-io/laconicd/init.sh
-# so we should have a mechanism to bundle it inside the container rather than link from here
-# at deploy time.
-
-KEY="mykey"
-CHAINID="laconic_9000-1"
-MONIKER="localtestnet"
-KEYRING="test"
-KEYALGO="eth_secp256k1"
-LOGLEVEL="info"
-# trace evm
-TRACE="--trace"
-# TRACE=""
-
-# validate dependencies are installed
-command -v jq > /dev/null 2>&1 || { echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"; exit 1; }
-
-# remove existing daemon and client
-rm -rf ~/.laconic*
-
-make install
-
-laconicd config keyring-backend $KEYRING
-laconicd config chain-id $CHAINID
-
-# if $KEY exists it should be deleted
-laconicd keys add $KEY --keyring-backend $KEYRING --algo $KEYALGO
-
-# Set moniker and chain-id for Ethermint (Moniker can be anything, chain-id must be an integer)
-laconicd init $MONIKER --chain-id $CHAINID
-
-# Change parameter token denominations to aphoton
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["staking"]["params"]["bond_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["crisis"]["constant_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["gov"]["deposit_params"]["min_deposit"][0]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["mint"]["params"]["mint_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-# Custom modules
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commit_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveal_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_minimum_bid"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-if [[ "$TEST_REGISTRY_EXPIRY" == "true" ]]; then
-  echo "Setting timers for expiry tests."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-if [[ "$TEST_AUCTION_ENABLED" == "true" ]]; then
-  echo "Enabling auction and setting timers."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_enabled"]=true' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="300s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-# increase block time (?)
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["time_iota_ms"]="1000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# Set gas limit in genesis
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["max_gas"]="10000000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# disable produce empty block
-if [[ "$OSTYPE" == "darwin"* ]]; then
-    sed -i '' 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-  else
-    sed -i 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-fi
-
-if [[ $1 == "pending" ]]; then
-  if [[ "$OSTYPE" == "darwin"* ]]; then
-      sed -i '' 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  else
-      sed -i 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  fi
-fi
-
-# Allocate genesis accounts (cosmos formatted addresses)
-laconicd add-genesis-account $KEY 100000000000000000000000000aphoton --keyring-backend $KEYRING
-
-# Sign genesis transaction
-laconicd gentx $KEY 1000000000000000000000aphoton --keyring-backend $KEYRING --chain-id $CHAINID
-
-# Collect genesis tx
-laconicd collect-gentxs
-
-# Run this to ensure everything worked and that the genesis file is setup correctly
-laconicd validate-genesis
-
-if [[ $1 == "pending" ]]; then
-  echo "pending mode is on, please wait for the first block committed."
-fi
-
-# Start the node (remove the --pruning=nothing flag if historical queries are not needed)
-laconicd start --pruning=nothing --evm.tracer=json $TRACE --log_level $LOGLEVEL --minimum-gas-prices=0.0001aphoton --json-rpc.api eth,txpool,personal,net,debug,web3,miner --api.enable --gql-server --gql-playground
@@ -1,37 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Check existing config if it exists
-if [ -f /app/jwt.txt ] && [ -f /app/rollup.json ]; then
-  echo "Found existing L2 config, cross-checking with L1 deployment config"
-
-  SOURCE_L1_CONF=$(cat /contracts-bedrock/deploy-config/getting-started.json)
-  EXP_L1_BLOCKHASH=$(echo "$SOURCE_L1_CONF" | jq -r '.l1StartingBlockTag')
-  EXP_BATCHER=$(echo "$SOURCE_L1_CONF" | jq -r '.batchSenderAddress')
-
-  GEN_L2_CONF=$(cat /app/rollup.json)
-  GEN_L1_BLOCKHASH=$(echo "$GEN_L2_CONF" | jq -r '.genesis.l1.hash')
-  GEN_BATCHER=$(echo "$GEN_L2_CONF" | jq -r '.genesis.system_config.batcherAddr')
-
-  if [ "$EXP_L1_BLOCKHASH" = "$GEN_L1_BLOCKHASH" ] && [ "$EXP_BATCHER" = "$GEN_BATCHER" ]; then
-    echo "Config cross-checked, exiting"
-    exit 0
-  fi
-
-  echo "Existing L2 config doesn't match the L1 deployment config, please clear L2 config volume before starting"
-  exit 1
-fi
-
-op-node genesis l2 \
-  --deploy-config /contracts-bedrock/deploy-config/getting-started.json \
-  --deployment-dir /contracts-bedrock/deployments/getting-started/ \
-  --outfile.l2 /app/genesis.json \
-  --outfile.rollup /app/rollup.json \
-  --l1-rpc $CERC_L1_RPC
-
-openssl rand -hex 32 > /app/jwt.txt
@@ -1,131 +0,0 @@
-#!/bin/bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_CHAIN_ID="${CERC_L1_CHAIN_ID:-${DEFAULT_CERC_L1_CHAIN_ID}}"
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-CERC_L1_ACCOUNTS_CSV_URL="${CERC_L1_ACCOUNTS_CSV_URL:-${DEFAULT_CERC_L1_ACCOUNTS_CSV_URL}}"
-
-echo "Using L1 RPC endpoint ${CERC_L1_RPC}"
-
-IMPORT_1="import './verify-contract-deployment'"
-IMPORT_2="import './rekey-json'"
-IMPORT_3="import './send-balance'"
-
-# Append mounted tasks to tasks/index.ts file if not present
-if ! grep -Fxq "$IMPORT_1" tasks/index.ts; then
-  echo "$IMPORT_1" >> tasks/index.ts
-  echo "$IMPORT_2" >> tasks/index.ts
-  echo "$IMPORT_3" >> tasks/index.ts
-fi
-
-# Update the chainId in the hardhat config
-sed -i "/getting-started/ {n; s/.*chainId.*/      chainId: $CERC_L1_CHAIN_ID,/}" hardhat.config.ts
-
-# Exit if a deployment already exists (on restarts)
-# Note: fixturenet-eth-geth currently starts fresh on a restart
-if [ -d "deployments/getting-started" ]; then
-  echo "Deployment directory deployments/getting-started found, checking SystemDictator deployment"
-
-  # Read JSON file into variable
-  SYSTEM_DICTATOR_DETAILS=$(cat deployments/getting-started/SystemDictator.json)
-
-  # Parse JSON into variables
-  SYSTEM_DICTATOR_ADDRESS=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.address')
-  SYSTEM_DICTATOR_TXHASH=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.transactionHash')
-
-  if yarn hardhat verify-contract-deployment --contract "${SYSTEM_DICTATOR_ADDRESS}" --transaction-hash "${SYSTEM_DICTATOR_TXHASH}"; then
-    echo "Deployment verfication successful, exiting"
-    exit 0
-  else
-    echo "Deployment verfication failed, please clear L1 deployment volume before starting"
-    exit 1
-  fi
-fi
-
-# Generate the L2 account addresses
-yarn hardhat rekey-json --output /l2-accounts/keys.json
-
-# Read JSON file into variable
-KEYS_JSON=$(cat /l2-accounts/keys.json)
-
-# Parse JSON into variables
-ADMIN_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Admin.address')
-ADMIN_PRIV_KEY=$(echo "$KEYS_JSON" | jq -r '.Admin.privateKey')
-PROPOSER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Proposer.address')
-BATCHER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Batcher.address')
-SEQUENCER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Sequencer.address')
-
-# Get the private keys of L1 accounts
-if [ -n "$CERC_L1_ACCOUNTS_CSV_URL" ] && \
-  l1_accounts_response=$(curl -L --write-out '%{http_code}' --silent --output /dev/null "$CERC_L1_ACCOUNTS_CSV_URL") && \
-  [ "$l1_accounts_response" -eq 200 ];
-then
-  echo "Fetching L1 account credentials using provided URL"
-  mkdir -p /geth-accounts
-  wget -O /geth-accounts/accounts.csv "$CERC_L1_ACCOUNTS_CSV_URL"
-
-  CERC_L1_ADDRESS=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 2)
-  CERC_L1_PRIV_KEY=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
-  CERC_L1_ADDRESS_2=$(awk -F, 'NR==2{print $(NF-1)}' /geth-accounts/accounts.csv)
-  CERC_L1_PRIV_KEY_2=$(awk -F, 'NR==2{print $NF}' /geth-accounts/accounts.csv)
-else
-  echo "Couldn't fetch L1 account credentials, using them from env"
-fi
-
-# Send balances to the above L2 addresses
-yarn hardhat send-balance --to "${ADMIN_ADDRESS}" --amount 2 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${PROPOSER_ADDRESS}" --amount 5 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${BATCHER_ADDRESS}" --amount 1000 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-
-echo "Balances sent to L2 accounts"
-
-# Select a finalized L1 block as the starting point for roll ups
-until FINALIZED_BLOCK=$(cast block finalized --rpc-url "$CERC_L1_RPC"); do
-    echo "Waiting for a finalized L1 block to exist, retrying after 10s"
-    sleep 10
-done
-
-L1_BLOCKNUMBER=$(echo "$FINALIZED_BLOCK" | awk '/number/{print $2}')
-L1_BLOCKHASH=$(echo "$FINALIZED_BLOCK" | awk '/hash/{print $2}')
-L1_BLOCKTIMESTAMP=$(echo "$FINALIZED_BLOCK" | awk '/timestamp/{print $2}')
-
-echo "Selected L1 block ${L1_BLOCKNUMBER} as the starting block for roll ups"
-
-# Update the deployment config
-sed -i 's/"l2OutputOracleStartingTimestamp": TIMESTAMP/"l2OutputOracleStartingTimestamp": '"$L1_BLOCKTIMESTAMP"'/g' deploy-config/getting-started.json
-jq --arg chainid "$CERC_L1_CHAIN_ID" '.l1ChainID = ($chainid | tonumber)' deploy-config/getting-started.json > tmp.json && mv tmp.json deploy-config/getting-started.json
-
-node update-config.js deploy-config/getting-started.json "$ADMIN_ADDRESS" "$PROPOSER_ADDRESS" "$BATCHER_ADDRESS" "$SEQUENCER_ADDRESS" "$L1_BLOCKHASH"
-
-echo "Updated the deployment config"
-
-# Create a .env file
-echo "L1_RPC=$CERC_L1_RPC" > .env
-echo "PRIVATE_KEY_DEPLOYER=$ADMIN_PRIV_KEY" >> .env
-
-echo "Deploying the L1 smart contracts, this will take a while..."
-
-# Deploy the L1 smart contracts
-yarn hardhat deploy --network getting-started --tags l1
-
-echo "Deployed the L1 smart contracts"
-
-# Read Proxy contract's JSON and get the address
-PROXY_JSON=$(cat deployments/getting-started/Proxy__OVM_L1StandardBridge.json)
-PROXY_ADDRESS=$(echo "$PROXY_JSON" | jq -r '.address')
-
-# Send balance to the above Proxy contract in L1 for reflecting balance in L2
-# First account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-# Second account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY_2}" --network getting-started
-
-echo "Balance sent to Proxy L2 contract"
-echo "Use following accounts for transactions in L2:"
-echo "${CERC_L1_ADDRESS}"
-echo "${CERC_L1_ADDRESS_2}"
-echo "Done"
@@ -1,36 +0,0 @@
-const fs = require('fs')
-
-// Get the command-line argument
-const configFile = process.argv[2]
-const adminAddress = process.argv[3]
-const proposerAddress = process.argv[4]
-const batcherAddress = process.argv[5]
-const sequencerAddress = process.argv[6]
-const blockHash = process.argv[7]
-
-// Read the JSON file
-const configData = fs.readFileSync(configFile)
-const configObj = JSON.parse(configData)
-
-// Update the finalSystemOwner property with the ADMIN_ADDRESS value
-configObj.finalSystemOwner =
-  configObj.portalGuardian =
-  configObj.controller =
-  configObj.l2OutputOracleChallenger =
-  configObj.proxyAdminOwner =
-  configObj.baseFeeVaultRecipient =
-  configObj.l1FeeVaultRecipient =
-  configObj.sequencerFeeVaultRecipient =
-  configObj.governanceTokenOwner =
-    adminAddress
-
-configObj.l2OutputOracleProposer = proposerAddress
-
-configObj.batchSenderAddress = batcherAddress
-
-configObj.p2pSequencerAddress = sequencerAddress
-
-configObj.l1StartingBlockTag = blockHash
-
-// Write the updated JSON object back to the file
-fs.writeFileSync(configFile, JSON.stringify(configObj, null, 2))
@@ -1,90 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-# TODO: Add in container build or use other tool
-echo "Installing jq"
-apk update && apk add jq
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Initialize op-geth if datadir/geth not found
-if [ -f /op-node/jwt.txt ] && [ -d datadir/geth ]; then
-  echo "Found existing datadir, checking block signer key"
-
-  BLOCK_SIGNER_KEY=$(cat datadir/block-signer-key)
-
-  if [ "$SEQUENCER_KEY" = "$BLOCK_SIGNER_KEY" ]; then
-    echo "Sequencer and block signer keys match, skipping initialization"
-  else
-    echo "Sequencer and block signer keys don't match, please clear L2 geth data volume before starting"
-    exit 1
-  fi
-else
-  echo "Initializing op-geth"
-
-  mkdir -p datadir
-  echo "pwd" > datadir/password
-  echo $SEQUENCER_KEY > datadir/block-signer-key
-
-  geth account import --datadir=datadir --password=datadir/password datadir/block-signer-key
-
-  while [ ! -f "/op-node/jwt.txt" ]
-  do
-    echo "Config files not created. Checking after 5 seconds."
-    sleep 5
-  done
-
-  echo "Config files created by op-node, proceeding with the initialization..."
-
-  geth init --datadir=datadir /op-node/genesis.json
-  echo "Node Initialized"
-fi
-
-SEQUENCER_ADDRESS=$(jq -r '.Sequencer.address' /l2-accounts/keys.json | tr -d '"')
-echo "SEQUENCER_ADDRESS: ${SEQUENCER_ADDRESS}"
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${geth_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-geth
-geth \
-  --datadir ./datadir \
-  --http \
-  --http.corsdomain="*" \
-  --http.vhosts="*" \
-  --http.addr=0.0.0.0 \
-  --http.api=web3,debug,eth,txpool,net,engine \
-  --ws \
-  --ws.addr=0.0.0.0 \
-  --ws.port=8546 \
-  --ws.origins="*" \
-  --ws.api=debug,eth,txpool,net,engine \
-  --syncmode=full \
-  --gcmode=archive \
-  --nodiscover \
-  --maxpeers=0 \
-  --networkid=42069 \
-  --authrpc.vhosts="*" \
-  --authrpc.addr=0.0.0.0 \
-  --authrpc.port=8551 \
-  --authrpc.jwtsecret=/op-node/jwt.txt \
-  --rollup.disabletxpoolgossip=true \
-  --password=./datadir/password \
-  --allow-insecure-unlock \
-  --mine \
-  --miner.etherbase=$SEQUENCER_ADDRESS \
-  --unlock=$SEQUENCER_ADDRESS \
-  &
-
-geth_pid=$!
-wait $geth_pid
@@ -1,26 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Run op-node
-op-node \
-  --l2=http://op-geth:8551 \
-  --l2.jwt-secret=/op-node-data/jwt.txt \
-  --sequencer.enabled \
-  --sequencer.l1-confs=3 \
-  --verifier.l1-confs=3 \
-  --rollup.config=/op-node-data/rollup.json \
-  --rpc.addr=0.0.0.0 \
-  --rpc.port=8547 \
-  --p2p.disable \
-  --rpc.enable-admin \
-  --p2p.sequencer.key=$SEQUENCER_KEY \
-  --l1=$CERC_L1_RPC \
-  --l1.rpckind=any
@@ -1,36 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Read the L2OutputOracle contract address from the deployment
-L2OO_DEPLOYMENT=$(cat /contracts-bedrock/deployments/getting-started/L2OutputOracle.json)
-L2OO_ADDR=$(echo "$L2OO_DEPLOYMENT" | jq -r '.address')
-
-# Get Proposer key from keys.json
-PROPOSER_KEY=$(jq -r '.Proposer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${proposer_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-proposer
-op-proposer \
-  --poll-interval 12s \
-  --rpc.port 8560 \
-  --rollup-rpc http://op-node:8547 \
-  --l2oo-address $L2OO_ADDR \
-  --private-key $PROPOSER_KEY \
-  --l1-eth-rpc $CERC_L1_RPC \
-  &
-
-proposer_pid=$!
-wait $proposer_pid
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-echo "Running Nitro reverse payment proxy"
-echo "Using CERC_PROXY_ADDRESS ${CERC_PROXY_ADDRESS}"
-echo "Using CERC_PROXY_NITRO_ENDPOINT ${CERC_PROXY_NITRO_ENDPOINT}"
-echo "Using CERC_PROXY_DESTINATION_URL ${CERC_PROXY_DESTINATION_URL}"
-echo "Using CERC_PROXY_COST_PER_BYTE ${CERC_PROXY_COST_PER_BYTE}"
-
-./proxy -proxyaddress ${CERC_PROXY_ADDRESS} -nitroendpoint=${CERC_PROXY_NITRO_ENDPOINT} -destinationurl=${CERC_PROXY_DESTINATION_URL} -costperbyte ${CERC_PROXY_COST_PER_BYTE} -enablepaidrpcmethods
@@ -1,5 +0,0 @@
-# Defaults
-
-# ipld-eth-server endpoints
-DEFAULT_CERC_IPLD_ETH_RPC=
-DEFAULT_CERC_IPLD_ETH_GQL=
@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-# Build cerc/go-nitro
-
-source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-
-docker build -t cerc/go-nitro:local -f ${CERC_REPO_BASE_DIR}/go-nitro/docker/local/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/go-nitro
@@ -1,6 +0,0 @@
-# Config for laconic-console running in a fixturenet with laconicd
-
-services:
-  wns:
-    server: 'LACONIC_HOSTED_ENDPOINT:9473/api'
-    webui: 'LACONIC_HOSTED_ENDPOINT:9473/console'
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-# Create some demo/test records in the registry
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-registry_command="laconic cns"
-record_1_filename=demo-record-1.yml
-cat <<EOF > ${record_1_filename}
-record:
-  type: WebsiteRegistrationRecord
-  url: 'https://cerc.io'
-  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
-  build_artifact_cid: QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
-  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
-  version: 1.0.23
-EOF
-# Check we have funds
-funds_response=$(${registry_command} account get --address $(cat my-address.txt))
-funds_balance=$(echo ${funds_response} | jq -r .[0].balance[0].quantity)
-echo "Balance is: ${funds_balance}"
-# Create a bond
-bond_create_result=$(${registry_command} bond create --type aphoton --quantity 1000000000)
-bond_id=$(echo ${bond_create_result} | jq -r .bondId)
-echo "Created bond with id: ${bond_id}"
-# Publish a demo record
-publish_response=$(${registry_command} record publish --filename ${record_1_filename} --bond-id ${bond_id})
-published_record_id=$(echo ${publish_response} | jq -r .id)
-echo "Published ${record_1_filename} with id: ${published_record_id}"
@@ -1,21 +0,0 @@
-#!/usr/bin/env bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-# Test if the container's filesystem is old (run previously) or new
-EXISTSFILENAME=/data/exists
-echo "Test container starting"
-if [[ -f "$EXISTSFILENAME" ]];
-then
-    TIMESTAMP=`cat $EXISTSFILENAME`
-    echo "Filesystem is old, created: $TIMESTAMP" 
-else
-    echo "Filesystem is fresh"
-    echo `date` > $EXISTSFILENAME
-fi
-if [ -n "$CERC_TEST_PARAM_1" ]; then
-  echo "Test-param-1: ${CERC_TEST_PARAM_1}"
-fi
-# Run nginx which will block here forever
-/usr/sbin/nginx -g "daemon off;"
@@ -1,13 +0,0 @@
-FROM node:16.17.1-alpine3.16
-
-RUN apk --update --no-cache add git python3 alpine-sdk
-
-WORKDIR /app
-
-COPY . .
-
-RUN echo "Building watcher-ts" && \
-    git checkout v0.2.19 && \
-    yarn && yarn build
-
-WORKDIR /app/packages/erc20-watcher
@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-    set -x
-fi
-
-CERC_WEBAPP_FILES_DIR="${CERC_WEBAPP_FILES_DIR:-/data}"
-
-/scripts/apply-webapp-config.sh /config/config.yml ${CERC_WEBAPP_FILES_DIR}
-http-server -p 80 ${CERC_WEBAPP_FILES_DIR}
@@ -1,72 +0,0 @@
-# Azimuth Watcher
-
-Instructions to setup and deploy Azimuth Watcher stack
-
-## Setup
-
-Prerequisite: `ipld-eth-server` RPC and GQL endpoints
-
-Clone required repositories:
-
-```bash
-laconic-so --stack azimuth setup-repositories
-```
-
-NOTE: If the repository already exists and checked out to a different version, `setup-repositories` command will throw an error.
-For getting around this, the `azimuth-watcher-ts` repository can be removed and then run the command.
-
-Checkout to the required versions and branches in repos
-
-```bash
-# azimuth-watcher-ts
-cd ~/cerc/azimuth-watcher-ts
-git checkout v0.1.0
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack azimuth build-containers
-```
-
-This should create the required docker images in the local image registry.
-
-### Configuration
-
-* Create and update an env file to be used in the next step:
-
-  ```bash
-  # External ipld-eth-server endpoints
-  CERC_IPLD_ETH_RPC=
-  CERC_IPLD_ETH_GQL=
-  ```
-
-* NOTE: If `ipld-eth-server` is running on the host machine, use `host.docker.internal` as the hostname to access host ports
-
-### Deploy the stack
-
-* Deploy the containers:
-
-  ```bash
-  laconic-so --stack azimuth deploy-system --env-file <PATH_TO_ENV_FILE> up
-  ```
-
-* List and check the health status of all the containers using `docker ps` and wait for them to be `healthy`
-
-## Clean up
-
-Stop all the services running in background:
-
-```bash
-laconic-so --stack azimuth deploy-system down
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*watcher_db_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*watcher_db_data")
-```
@@ -1,123 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy an end-to-end L1+L2 stack with [fixturenet-eth](../fixturenet-eth/) (L1) and [Optimism](https://stack.optimism.io) (L2)
-
-We support running just the L2 part of stack, given an external L1 endpoint. Follow the [L2 only doc](./l2-only.md) for the same.
-
-## Setup
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers
-
-# If redeploying with changes in the stack containers
-laconic-so --stack fixturenet-optimism build-containers --force-rebuild
-
-# If errors are thrown during build, old images used by this stack would have to be deleted
-```
-
-Note: this will take >10 mins depending on the specs of your machine, and **requires** 16GB of memory or greater.
-
-This should create the required docker images in the local image registry:
-* `cerc/go-ethereum`
-* `cerc/lighthouse`
-* `cerc/fixturenet-eth-geth`
-* `cerc/fixturenet-eth-lighthouse`
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy up
-```
-
-The `fixturenet-optimism-contracts` service takes a while to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-It may restart a few times after running into errors.
-
-To list and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-* If `op-geth` service aborts or is restarted, the following error might occur in the `op-node` service:
-
-  ```bash
-  WARN [02-16|21:22:02.868] Derivation process temporary error       attempts=14 err="stage 0 failed resetting: temp: failed to find the L2 Heads to start from: failed to fetch L2 block by hash 0x0000000000000000000000000000000000000000000000000000000000000000: failed to determine block-hash of hash 0x0000000000000000000000000000000000000000000000000000000000000000, could not get payload: not found"
-  ```
-
-* This means that the data directory that `op-geth` is using is corrupted and needs to be reinitialized; the containers `op-geth`, `op-node` and `op-batcher` need to be started afresh:
-
-  WARNING: This will reset the L2 chain; consequently, all the data on it will be lost
-
-  * Stop and remove the concerned containers:
-
-    ```bash
-    # List the containers
-    docker ps -f "name=op-geth|op-node|op-batcher"
-
-    # Force stop and remove the listed containers
-    docker rm -f $(docker ps -qf "name=op-geth|op-node|op-batcher")
-    ```
-
-  * Remove the concerned volume:
-
-    ```bash
-    # List the volume
-    docker volume ls -q --filter name=l2_geth_data
-
-    # Remove the listed volume
-    docker volume rm $(docker volume ls -q --filter name=l2_geth_data)
-    ```
-
-  * Re-run the deployment command used in [Deploy](#deploy) to restart the stopped containers
-
-## Known Issues
-
-* Resource requirements (memory + time) for building the `cerc/foundry` image are on the higher side
-  * `cerc/optimism-contracts` image is currently based on `cerc/foundry` (Optimism requires foundry installation)
@@ -1,100 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy L2 fixturenet using [Optimism](https://stack.optimism.io)
-
-## Setup
-
-Prerequisite: An L1 Ethereum RPC endpoint
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories --exclude git.vdb.to/cerc-io/go-ethereum
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers --include cerc/foundry,cerc/optimism-contracts,cerc/optimism-op-node,cerc/optimism-l2geth,cerc/optimism-op-batcher,cerc/optimism-op-proposer
-```
-
-This should create the required docker images in the local image registry:
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Create and update an env file to be used in the next step ([defaults](../../config/fixturenet-optimism/l1-params.env)):
-
-  ```bash
-  # External L1 endpoint
-  CERC_L1_CHAIN_ID=
-  CERC_L1_RPC=
-  CERC_L1_HOST=
-  CERC_L1_PORT=
-
-  # URL to get CSV with credentials for accounts on L1
-  # that are used to send balance to Optimism Proxy contract
-  # (enables them to do transactions on L2)
-  CERC_L1_ACCOUNTS_CSV_URL=
-
-  # OR
-  # Specify the required account credentials
-  CERC_L1_ADDRESS=
-  CERC_L1_PRIV_KEY=
-  CERC_L1_ADDRESS_2=
-  CERC_L1_PRIV_KEY_2=
-  ```
-
-* NOTE: If L1 is running on the host machine, use `host.docker.internal` as the hostname to access the host port
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism --env-file <PATH_TO_ENV_FILE> up
-```
-
-The `fixturenet-optimism-contracts` service may take a while (`~15 mins`) to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-
-To list down and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-See [Troubleshooting](./README.md#troubleshooting)
@@ -1,57 +0,0 @@
-# fixturenet-payments
-
-Instructions to setup and deploy an end-to-end fixturenet-payments stack
-
-## Setup
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-payments setup-repositories --pull
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-payments build-containers
-```
-
-## Deploy
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-payments deploy --cluster payments up
-
-# Exposed on host ports:
-# 4005: go-nitro node's RPC endpoint
-# 5005: go-nitro node's p2p endpoint
-# 8081: reverse payment proxy's RPC endpoint
-# 15432: MobyMask v3 watcher's db endpoint
-# 3001: MobyMask v3 watcher endpoint
-# 9090: MobyMask v3 watcher relay node endpoint
-# 8080: MobyMask snap
-# 3004: MobyMask v3 app
-```
-
-## Demo
-
-Follow the [demo](./demo.md) to try out end-to-end payments
-
-## Clean up
-
-Stop all the services running in background:
-
-```bash
-laconic-so --stack fixturenet-payments deploy --cluster payments down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=[payments"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=[payments")
-```
@@ -1,310 +0,0 @@
-# Demo
-
-Stack components:
-* `ipld-eth-db` database for statediffed data
-* Local geth + lighthouse blockchain "fixturenet" running in statediffing mode
-* `ipld-eth-server` which runs an ETH RPC API and a GQL server; serves data from `ipld-eth-db`
-* A go-nitro deployment acting as the Nitro node for `ipld-eth-server`
-* A modified reverse payment proxy server (based on the one from go-nitro) that proxies requests to `ipld-eth-server`'s RPC endpoint; it talks to `ipld-eth-server`'s Nitro node to accept and validate payments required for configured RPC requests
-* A MobyMask v3 watcher that pays the `ipld-eth-server` for ETH RPC requests
-* A MobyMask v3 app that pays the watcher for reads (GQL queries) and writes
-* An example ERC20 Ponder app that pays the `ipld-eth-server` for ETH RPC requests
-
-## Setup
-
-* On starting the stack, MobyMask watcher creates a payment channel with the `ipld-eth-server`'s Nitro node. Check watcher logs and wait for the same:
-
-  ```bash
-  docker logs -f $(docker ps -aq --filter name="mobymask-watcher-server")
-
-  # Expected output:
-  # vulcanize:server Peer ID: 12D3KooWKLqLWU82VU7jmsmQMruRvZWhoBoVsf1UHchM5Nuq9ymY
-  # vulcanize:server Using chain URL http://fixturenet-eth-geth-1:8546 for Nitro node
-  # ...
-  # ts-nitro:util:nitro Ledger channel created with id 0x65703ccdfacab09ac35367bdbe6c5a337e7a6651aad526807607b1c59b28bc1e
-  # ...
-  # ts-nitro:util:nitro Virtual payment channel created with id 0x29ff1335d73391a50e8fde3e9b34f00c3d81c39ddc7f89187f44dd51df96140e
-  # vulcanize:server Starting server... +0ms
-  ```
-
-* Keep the above command running to keep track of incoming payments and GQL requests from the MobyMask app
-
-* In another terminal, export the payment channel id to a variable:
-
-  ```bash
-  export WATCHER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
-  ```
-
-* Check the payment channel status:
-
-  ```bash
-  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -h go-nitro -p 4005"
-
-  # Expected output:
-  # {
-  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
-  #   Status: 'Open',
-  #   Balance: {
-  #     AssetAddress: '0x0000000000000000000000000000000000000000',
-  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
-  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
-  #     PaidSoFar: 0n,
-  #     RemainingFunds: 1000000000n
-  #   }
-  # }
-  ```
-
-* In another terminal, check the reverse payment proxy server's logs to keep track of incoming payments and RPC requests:
-
-  ```bash
-  docker logs -f $(docker ps -aq --filter name="nitro-reverse-payment-proxy")
-  ```
-
-* MetaMask flask wallet setup for running the MobyMask app:
-
-  * Get the geth node’s port mapped to host:
-
-    ```bash
-    docker port payments-fixturenet-eth-geth-1-1 8545
-    ```
-
-  * In MetaMask, add a custom network with the following settings:
-
-    ```bash
-    # Network name
-    Local fixturenet
-
-    # New RPC URL
-    http://127.0.0.1:<GETH_PORT>
-
-    # Chain ID
-    1212
-
-    # Currency symbol
-    ETH
-    ```
-
-  * Import a faucet account with the following private key:
-
-    ```bash
-    # Faucet PK
-    # 0x570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597
-    ```
-
-  * Create an additional account for usage in the app; fund it from the faucet account
-
-* Get the generated root invite link for MobyMask from contract deployment container logs:
-
-  ```bash
-  docker logs -f $(docker ps -aq --filter name="mobymask-1")
-
-  # Expected output:
-  # ...
-  #   "key": "0x60e706fda4639fe0a8eb102cb0ce81231cf6e819f41cb4eadf72d865ea4c11ad"
-  # }
-  # http://127.0.0.1:3004/#/members?invitation=<INVITATION>
-  ```
-
-## Run
-
-### MobyMask App
-
-* Open app in a browser (where MetaMask was setup) using the invite link
-
-* Run the following in browser console to enable logs:
-
-  ```bash
-  localStorage.debug = 'ts-nitro:*'
-  # Refresh the tab for taking effect
-  ```
-
-* In the app’s debug panel, check that the peer gets connected to relay node and watcher peer
-
-* Open the `NITRO` tab in debug panel
-  * Click on `Connect Wallet` to connect to MetaMask (make sure that the newly funded account is active)
-  * Click on `Connect Snap` to install/connect snap
-
-* Perform `DIRECT FUND` with the preset amount and wait for the MetaMask confirmation prompt to appear; confirm the transaction and wait for a ledger channel to be created with the watcher
-
-* Perform `VIRTUAL FUND` with amount set to `10000` and wait for a payment channel to be created with the watcher
-
-* Perform phisher status check queries now that a payment channel is created:
-
-  * Check the watcher logs for received payments along with the GQL queries:
-
-    ```bash
-    # Expected output:
-    # ...
-    # laconic:payments Serving a paid query for 0x86804299822212c070178B5135Ba6DdAcFC357D3
-    # vulcanize:resolver isPhisher 0x98ae4f9e9d01cc892adfe6871e1db0287039e0c183d3b5bb31d724228c114744 0x2B6AFbd4F479cE4101Df722cF4E05F941523EaD9 TWT:ash1
-    # vulcanize:indexer isPhisher: db miss, fetching from upstream server
-    # laconic:payments Making RPC call: eth_chainId
-    # laconic:payments Making RPC call: eth_getBlockByHash
-    # laconic:payments Making RPC call: eth_chainId
-    # laconic:payments Making RPC call: eth_getStorageAt
-    ```
-
-  * The watcher makes several ETH RPC requests to `ipld-eth-server` to fetch data required for satisfying the GQL request(s); check the payment proxy server logs for charged RPC requests (`eth_getBlockByHash`, `eth_getBlockByNumber`, `eth_getStorageAt`):
-
-    ```bash
-    # Expected output:
-    # ...
-    # {"time":"2023-10-06T06:46:52.769009314Z","level":"DEBUG","msg":"Serving RPC request","method":"eth_chainId"}
-    # {"time":"2023-10-06T06:46:52.773006426Z","level":"DEBUG","msg":"Serving RPC request","method":"eth_getBlockByNumber"}
-    # {"time":"2023-10-06T06:46:52.811142054Z","level":"DEBUG","msg":"Request cost","cost-per-byte":1,"response-length":1480,"cost":1480,"method":"eth_getBlockByNumber"}
-    # {"time":"2023-10-06T06:46:52.811418494Z","level":"DEBUG","msg":"sent message","address":"0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE","method":"receive_voucher"}
-    # {"time":"2023-10-06T06:46:52.812557482Z","level":"DEBUG","msg":"Received voucher","delta":5000}
-    # ...
-    # {"time":"2023-10-06T06:46:52.87525215Z","level":"DEBUG","msg":"Serving RPC request","method":"eth_getStorageAt"}
-    # {"time":"2023-10-06T06:46:52.882859654Z","level":"DEBUG","msg":"Request cost","cost-per-byte":1,"response-length":104,"cost":104,"method":"eth_getStorageAt"}
-    # {"time":"2023-10-06T06:46:52.882946485Z","level":"DEBUG","msg":"sent message","address":"0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE","method":"receive_voucher"}
-    # {"time":"2023-10-06T06:46:52.884012641Z","level":"DEBUG","msg":"Received voucher","delta":5000}
-    # {"time":"2023-10-06T06:46:52.884032961Z","level":"DEBUG","msg":"Destination request","url":"http://ipld-eth-server:8081/"}
-    ```
-
-* Change the amount besides `PAY` button in debug panel to `>=100` for phisher reports next
-
-* Perform a phisher report and check the watcher logs for received payments:
-
-  ```bash
-  # Expected output:
-  # ...
-  # vulcanize:libp2p-utils [6:50:2] Received a message on mobymask P2P network from peer: 12D3KooWRkxV9SX8uTUZYkbRjai4Fsn7yavB61J5TMnksixsabsP
-  # ts-nitro:engine {"msg":"Received message","_msg":{"to":"0xBBB676","from":"0x868042","payloadSummaries":[],"proposalSummaries":[],"payments":[{"amount":200,"channelId":"0x557153d729cf3323c0bdb40a36b245f98c2d4562933ba2182c9d61c5cfeda948"}],"rejectedObjectives":[]}}
-  # laconic:payments Received a payment voucher of 100 from 0x86804299822212c070178B5135Ba6DdAcFC357D3
-  # vulcanize:libp2p-utils Payment received for a mutation request from 0x86804299822212c070178B5135Ba6DdAcFC357D3
-  # vulcanize:libp2p-utils Transaction receipt for invoke message {
-  #   to: '0x2B6AFbd4F479cE4101Df722cF4E05F941523EaD9',
-  #   blockNumber: 232,
-  #   blockHash: '0x6a188722c102662ea48af3786fe9db0d4b6c7ab7b27473eb0e628cf95746a244',
-  #   transactionHash: '0x6521205db8a905b3222adc2b6855f9b2abc72580624d299bec2a35bcba173efa',
-  #   effectiveGasPrice: '1500000007',
-  #   gasUsed: '113355'
-  # }
-  ```
-
-* Check the watcher - ipld-eth-server payment channel status after a few requests:
-
-  ```bash
-  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -h go-nitro -p 4005"
-
-  # Expected output ('PaidSoFar' should be non zero):
-  # {
-  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
-  #   Status: 'Open',
-  #   Balance: {
-  #     AssetAddress: '0x0000000000000000000000000000000000000000',
-  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
-  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
-  #     PaidSoFar: 30000n,
-  #     RemainingFunds: 999970000n
-  #   }
-  # }
-  ```
-
-### ERC20 Ponder App
-
-* Run the ponder app in indexer mode:
-
-  ```bash
-  docker exec -it payments-ponder-app-indexer-1 bash -c "DEBUG=laconic:payments pnpm start"
-
-  # Expected output:
-  # 08:00:28.701 INFO  payment    Nitro node setup with address 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d
-  #   laconic:payments Starting voucher subscription... +0ms
-  # ...
-  # 09:58:54.288 INFO  payment    Creating ledger channel with nitro node 0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE
-  # ...
-  # 09:59:14.230 INFO  payment    Creating payment channel with nitro node 0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE
-  # ...
-  # 09:59:14.329 INFO  payment    Using payment channel 0x10f049519bc3f862e2b26e974be8666886228f30ea54aab06e2f23718afffab0
-  ```
-
-* Export the payment channel id to a variable:
-
-  ```bash
-  export PONDER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
-  ```
-
-* On starting the Ponder app in indexer mode, it creates a payment channel with the `ipld-eth-server`'s Nitro node and then starts the historical sync service
-
-* The sync service makes several ETH RPC requests to the `ipld-eth-server` to fetch required data; check the payment proxy server logs for charged RPC requests (`eth_getBlockByNumber`, `eth_getLogs`)
-
-  ```bash
-  # Expected output:
-  # ...
-  # {"time":"2023-10-06T06:51:45.214478402Z","level":"DEBUG","msg":"Serving RPC request","method":"eth_getBlockByNumber"}
-  # {"time":"2023-10-06T06:51:45.22251171Z","level":"DEBUG","msg":"Request cost","cost-per-byte":1,"response-length":576,"cost":576,"method":"eth_getBlockByNumber"}
-  # {"time":"2023-10-06T06:51:45.222641963Z","level":"DEBUG","msg":"sent message","address":"0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE","method":"receive_voucher"}
-  # {"time":"2023-10-06T06:51:45.224042391Z","level":"DEBUG","msg":"Received voucher","delta":5000}
-  # {"time":"2023-10-06T06:51:45.224061411Z","level":"DEBUG","msg":"Destination request","url":"http://ipld-eth-server:8081/"}
-  # {"time":"2023-10-06T06:51:45.242064953Z","level":"DEBUG","msg":"Serving RPC request","method":"eth_getLogs"}
-  # {"time":"2023-10-06T06:51:45.249118517Z","level":"DEBUG","msg":"Request cost","cost-per-byte":1,"response-length":61,"cost":61,"method":"eth_getLogs"}
-  # {"time":"2023-10-06T06:51:45.249189892Z","level":"DEBUG","msg":"sent message","address":"0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE","method":"receive_voucher"}
-  # {"time":"2023-10-06T06:51:45.249743149Z","level":"DEBUG","msg":"Received voucher","delta":5000}
-  # {"time":"2023-10-06T06:51:45.249760631Z","level":"DEBUG","msg":"Destination request","url":"http://ipld-eth-server:8081/"}
-  # ...
-  ```
-
-* Check the ponder - ipld-eth-server payment channel status:
-
-  ```bash
-  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $PONDER_UPSTREAM_PAYMENT_CHANNEL -h go-nitro -p 4005"
-
-  # Expected output ('PaidSoFar' is non zero):
-  # {
-  #   ID: '0x1178ac0f2a43e54a122216fa6afdd30333b590e49e50317a1f9274a591da0f96',
-  #   Status: 'Open',
-  #   Balance: {
-  #     AssetAddress: '0x0000000000000000000000000000000000000000',
-  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
-  #     Payer: '0x67d5b55604d1af90074fcb69b8c51838fff84f8d',
-  #     PaidSoFar: 215000n,
-  #     RemainingFunds: 999785000n
-  #   }
-  # }
-  ```
-
-* In another terminal run the ponder app in watcher mode:
-  ```bash
-  docker exec -it payments-ponder-app-watcher-1 bash -c "DEBUG=laconic:payments pnpm start"
-
-  # Expected output:
-  # 11:23:22.057 DEBUG app        Started using config file: ponder.config.ts
-  # 08:02:12.548 INFO  payment    Nitro node setup with address 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db
-  #   laconic:payments Starting voucher subscription... +0ms
-  # 08:02:17.417 INFO  payment    Creating ledger channel with nitro node 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d ...
-  # 08:02:37.135 INFO  payment    Creating payment channel with nitro node 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d ...
-  # 08:02:37.313 INFO  payment    Using payment channel 0x4b8e67f6a6fcfe114fdd60b85f963344ece4c77d4eea3825688c74b45ff5509b
-  # ...
-  # 11:23:22.436 INFO  server     Started responding as healthy
-  ```
-
-* Check the terminal in which indexer mode ponder is running. Logs of payment for `eth_getLogs` queries can be seen:
-  ```bash
-  # ...
-  # 08:02:37.763 DEBUG realtime   Finished processing new head block 89 (network=fixturenet)
-  #   laconic:payments Received a payment voucher of 50 from 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +444ms
-  #   laconic:payments Serving a paid query for 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +1ms
-  # 08:02:37.804 DEBUG payment    Verified payment for GQL queries getLogEvents
-  #   laconic:payments Received a payment voucher of 50 from 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +45ms
-  #   laconic:payments Serving a paid query for 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +0ms
-  # 08:02:37.849 DEBUG payment    Verified payment for GQL queries getLogEvents
-  ```
-  
-## Clean Up
-
-* In the MobyMask app, perform `VIRTUAL DEFUND` and `DIRECT DEFUND` (in order) for closing the payment channel created with watcher
-
-* Run the following in the browser console to delete the Nitro node's data:
-
-  ```bash
-  await clearNodeStorage()
-  ```
-
-* Run the following in the browser console to clear data in local storage:
-  ```bash
-  localStorage.clear()
-  ```
-
-* On a fresh restart, clear activity tab data in MetaMask for concerned accounts
@@ -26,7 +26,7 @@ In addition to the pre-requisites listed in the [README](/README.md), the follow

 1. Clone this repository:
   ```
-   $ git clone https://github.com/cerc-io/stack-orchestrator.git
+   $ git clone https://git.vdb.to/cerc-io/stack-orchestrator.git
   ```

 2. Enter the project directory:
@@ -1,14 +1,14 @@
 # Adding a new stack

-See [this PR](https://github.com/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://github.com/cerc-io/stack-orchestrator/pull/435) is another good example.
+See [this PR](https://git.vdb.to/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://git.vdb.to/cerc-io/stack-orchestrator/pull/435) is another good example.

 For external developers, we recommend forking this repo and adding your stack directly to your fork. This initially requires running in "developer mode" as described [here](/docs/CONTRIBUTING.md). Check out the [Namada stack](https://github.com/vknowable/stack-orchestrator/blob/main/app/data/stacks/public-namada/digitalocean_quickstart.md) from Knowable to see how that is done.

-Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://github.com/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
+Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.

 ## Example

- in `app/data/stacks/my-new-stack/stack.yml` add:
+- in `stack_orchestrator/data/stacks/my-new-stack/stack.yml` add:

 ```yaml
 version: "0.1"
@@ -21,7 +21,7 @@ pods:
  - my-new-stack
 ```

- in `app/data/container-build/cerc-my-new-stack/build.sh` add:
+- in `stack_orchestrator/data/container-build/cerc-my-new-stack/build.sh` add:

 ```yaml
 #!/usr/bin/env bash
@@ -30,7 +30,7 @@ source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 docker build -t cerc/my-new-stack:local -f ${CERC_REPO_BASE_DIR}/my-new-stack/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/my-new-stack
 ```

- in `app/data/compose/docker-compose-my-new-stack.yml` add:
+- in `stack_orchestrator/data/compose/docker-compose-my-new-stack.yml` add:

 ```yaml
 version: "3.2"
@@ -43,20 +43,20 @@ services:
      - "0.0.0.0:3000:3000"
 ```

- in `app/data/repository-list.txt` add:
+- in `stack_orchestrator/data/repository-list.txt` add:

 ```bash
 github.com/my-org/my-new-stack
 ```
 whereby that repository contains your source code and a `Dockerfile`, and matches the `repos:` field in the `stack.yml`.

- in `app/data/container-image-list.txt` add:
+- in `stack_orchestrator/data/container-image-list.txt` add:

 ```bash
 cerc/my-new-stack
 ```

- in `app/data/pod-list.txt` add:
+- in `stack_orchestrator/data/pod-list.txt` add:

 ```bash
 my-new-stack
@@ -2,10 +2,10 @@

 The following tutorial explains the steps to run a laconicd fixturenet with CLI and web console that displays records in the registry. It is designed as an introduction to Stack Orchestrator and to showcase one component of the Laconic Stack. Prior to Stack Orchestrator, the following 4 repositories had to be cloned and setup manually:

- https://github.com/cerc-io/laconicd
- https://github.com/cerc-io/laconic-sdk
- https://github.com/cerc-io/laconic-registry-cli
- https://github.com/cerc-io/laconic-console
+- https://git.vdb.to/cerc-io/laconicd
+- https://git.vdb.to/cerc-io/laconic-sdk
+- https://git.vdb.to/cerc-io/laconic-registry-cli
+- https://git.vdb.to/cerc-io/laconic-console

 Now, with Stack Orchestrator, it is a few quick commands. Additionally, the `docker` and `docker compose` integration on the back-end allows the stack to easily persist, facilitating workflows.

@@ -52,7 +52,7 @@ laconic-so version
 1. Get the repositories

 ```
-laconic-so --stack fixturenet-laconic-loaded setup-repositories --include github.com/cerc-io/laconicd,github.com/cerc-io/laconic-sdk,github.com/cerc-io/laconic-registry-cli,github.com/cerc-io/laconic-console
+laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
 ```

 2. Set this environment variable to the Laconic self-hosted Gitea instance:
@@ -212,7 +212,7 @@ record:

 3. Try out additional CLI commands

- these are documented [here](https://github.com/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
+- these are documented [here](https://git.vdb.to/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
 - e.g,:

 ```
@@ -1,6 +1,6 @@
 # Specification

-Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://github.com/cerc-io/stack-orchestrator/issues/315).
+Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315).

 ## Implementation

@@ -0,0 +1,64 @@
+### Building and Running Webapps
+
+It is possible to build and run Next.js webapps using the `build-webapp` and `run-webapp` subcommands.
+
+To make it easier to build once and deploy into different environments and with different configuration,
+compilation and static page generation are separated in the `build-webapp` and `run-webapp` steps.
+
+This offers much more flexibilty than standard Next.js build methods, since any environment variables accessed
+via `process.env`, whether for pages or for API, will have values drawn from their runtime deployment environment,
+not their build environment. 
+
+## Building
+
+Building usually requires no additional configuration.  By default, the Next.js version specified in `package.json`
+is used, and either `yarn` or `npm` will be used automatically depending on which lock files are present.  These
+can be overidden with the build arguments `CERC_NEXT_VERSION` and `CERC_BUILD_TOOL` respectively.  For example: `--extra-build-args "--build-arg CERC_NEXT_VERSION=13.4.12"`
+
+**Example**:
+```
+$ cd ~/cerc
+$ git clone git@git.vdb.to:cerc-io/test-progressive-web-app.git
+$ laconic-so build-webapp --source-repo ~/cerc/test-progressive-web-app
+...
+
+Built host container for ~/cerc/test-progressive-web-app with tag:
+
+    cerc/test-progressive-web-app:local
+
+To test locally run:
+
+    laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment.env
+
+```
+
+## Running
+
+With `run-webapp` a new container will be launched on the local machine, with runtime configuration provided by `--env-file` (if specified) and published on an available port.  Multiple instances can be launched with different configuration.
+
+**Example**:
+```
+# Production env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/production.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 4c6e893bf436b3e91a2b92ce37e30e499685131705700bd92a90d2eb14eefd05
+URL: http://localhost:32768
+
+# Dev env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/dev.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 9ab96494f563aafb6c057d88df58f9eca81b90f8721a4e068493a289a976051c
+URL: http://localhost:32769
+```
+
+## Deploying
+
+Use the subcommand `deploy-webapp create` to make a deployment directory that can be subsequently deployed to a Kubernetes cluster.
+Example commands are shown below, assuming that the webapp container image `cerc/test-progressive-web-app:local` has already been built:
+```
+$ laconic-so deploy-webapp create --kube-config ~/kubectl/k8s-kubeconfig.yaml --image-registry registry.digitalocean.com/laconic-registry --deployment-dir webapp-k8s-deployment --image cerc/test-progressive-web-app:local --url https://test-pwa-app.hosting.laconic.com/ --env-file test-webapp.env
+$ laconic-so deployment --dir webapp-k8s-deployment push-images
+$ laconic-so deployment --dir webapp-k8s-deployment start
+```
@@ -1,4 +1,5 @@
 python-decouple>=3.8
+python-dotenv==1.0.0
 GitPython>=3.1.32
 tqdm>=4.65.0
 python-on-whales>=0.64.0
@@ -8,3 +9,5 @@ ruamel.yaml>=0.17.32
 pydantic==1.10.9
 tomli==2.0.1
 validators==0.22.0
+kubernetes>=28.1.0
+humanfriendly>=10.0
@@ -41,4 +41,4 @@ runcmd:
  - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
  - systemctl enable docker
  - systemctl start docker
-  - git clone https://github.com/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator
+  - git clone https://git.vdb.to/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator
@@ -31,5 +31,5 @@ runcmd:
  - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
  - systemctl enable docker
  - systemctl start docker
-  - curl -L -o /usr/local/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+  - curl -L -o /usr/local/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
  - chmod +x /usr/local/bin/laconic-so
@@ -1,6 +1,6 @@
-build_tag_file_name=./app/data/build_tag.txt
+build_tag_file_name=./stack_orchestrator/data/build_tag.txt
 echo "# This file should be re-generated running: scripts/create_build_tag_file.sh script" > $build_tag_file_name
-product_version_string=$( tail -1 ./app/data/version.txt )
+product_version_string=$( tail -1 ./stack_orchestrator/data/version.txt )
 commit_string=$( git rev-parse --short HEAD )
 timestamp_string=$(date +'%Y%m%d%H%M')
 build_tag_string=${product_version_string}-${commit_string}-${timestamp_string}
@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+# Beginnings of a script to quickly spin up and test a deployment
+if [[ -n "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+if [[ -n "$1" ]]; then
+	stack_name=$1
+else
+	stack_name="test"
+fi
+spec_file_name="${stack_name}-spec.yml"
+deployment_dir_name="${stack_name}-deployment"
+rm -f ${spec_file_name}
+rm -rf ${deployment_dir_name}
+laconic-so --stack ${stack_name} deploy --deploy-to k8s-kind init --output ${spec_file_name}
+laconic-so --stack ${stack_name} deploy --deploy-to k8s-kind create --deployment-dir ${deployment_dir_name} --spec-file ${spec_file_name}
+#laconic-so deployment --dir ${deployment_dir_name} start
+#laconic-so deployment --dir ${deployment_dir_name} ps
+#laconic-so deployment --dir ${deployment_dir_name} stop
@@ -137,7 +137,7 @@ fi
 echo "**************************************************************************************"
 echo "Installing laconic-so"
 # install latest `laconic-so`
-distribution_url=https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+distribution_url=https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 install_filename=${install_dir}/laconic-so
 mkdir -p  ${install_dir}
 curl -L -o ${install_filename} ${distribution_url}
@@ -13,8 +13,8 @@ setup(
    description='Orchestrates deployment of the Laconic stack',
    long_description=long_description,
    long_description_content_type="text/markdown",
-    url='https://github.com/cerc-io/stack-orchestrator',
-    py_modules=['cli', 'app'],
+    url='https://git.vdb.to/cerc-io/stack-orchestrator',
+    py_modules=['stack_orchestrator'],
    packages=find_packages(),
    install_requires=[requirements],
    python_requires='>=3.7',
@@ -25,6 +25,6 @@ setup(
        "Operating System :: OS Independent",
    ],
    entry_points={
-        'console_scripts': ['laconic-so=cli:cli'],
+        'console_scripts': ['laconic-so=stack_orchestrator.main:cli'],
    }
 )
@@ -15,7 +15,7 @@

 import os
 from abc import ABC, abstractmethod
-from app.deploy import get_stack_status
+from stack_orchestrator.deploy.deploy import get_stack_status
 from decouple import config


@@ -0,0 +1,188 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds or pulls containers for the system components
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+import sys
+from decouple import config
+import subprocess
+import click
+import importlib.resources
+from pathlib import Path
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config, stack_is_external
+from stack_orchestrator.base import get_npm_registry_url
+
+# TODO: find a place for this
+#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
+
+
+def make_container_build_env(dev_root_path: str,
+                             container_build_dir: str,
+                             debug: bool,
+                             force_rebuild: bool,
+                             extra_build_args: str):
+    container_build_env = {
+        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
+        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
+        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
+        "CERC_REPO_BASE_DIR": dev_root_path,
+        "CERC_CONTAINER_BASE_DIR": container_build_dir,
+        "CERC_HOST_UID": f"{os.getuid()}",
+        "CERC_HOST_GID": f"{os.getgid()}",
+        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
+    }
+    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
+    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
+    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
+    docker_host_env = os.getenv("DOCKER_HOST")
+    if docker_host_env:
+        container_build_env.update({"DOCKER_HOST": docker_host_env})
+
+    return container_build_env
+
+
+def process_container(stack: str,
+                      container,
+                      container_build_dir: str,
+                      container_build_env: dict,
+                      dev_root_path: str,
+                      quiet: bool,
+                      verbose: bool,
+                      dry_run: bool,
+                      continue_on_error: bool,
+                      ):
+    if not quiet:
+        print(f"Building: {container}")
+
+    default_container_tag = f"{container}:local"
+    container_build_env.update({"CERC_DEFAULT_CONTAINER_IMAGE_TAG": default_container_tag})
+
+    # Check if this is in an external stack
+    if stack_is_external(stack):
+        container_parent_dir = Path(stack).joinpath("container-build")
+        temp_build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+        temp_build_script_filename = temp_build_dir.joinpath("build.sh")
+        # Now check if the container exists in the external stack.
+        if not temp_build_script_filename.exists():
+            # If not, revert to building an internal container
+            container_parent_dir = container_build_dir
+    else:
+        container_parent_dir = container_build_dir
+
+    build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+    build_script_filename = build_dir.joinpath("build.sh")
+
+    if verbose:
+        print(f"Build script filename: {build_script_filename}")
+    if os.path.exists(build_script_filename):
+        build_command = build_script_filename.as_posix()
+    else:
+        if verbose:
+            print(f"No script file found: {build_script_filename}, using default build script")
+        repo_dir = container.split('/')[1]
+        # TODO: make this less of a hack -- should be specified in some metadata somewhere
+        # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
+        repo_full_path = os.path.join(dev_root_path, repo_dir)
+        repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
+        build_command = os.path.join(container_build_dir,
+                                     "default-build.sh") + f" {default_container_tag} {repo_dir_or_build_dir}"
+    if not dry_run:
+        # No PATH at all causes failures with podman.
+        if "PATH" not in container_build_env:
+            container_build_env["PATH"] = os.environ["PATH"]
+        if verbose:
+            print(f"Executing: {build_command} with environment: {container_build_env}")
+        build_result = subprocess.run(build_command, shell=True, env=container_build_env)
+        if verbose:
+            print(f"Return code is: {build_result.returncode}")
+        if build_result.returncode != 0:
+            print(f"Error running build for {container}")
+            if not continue_on_error:
+                print("FATAL Error: container build failed and --continue-on-error not set, exiting")
+                sys.exit(1)
+            else:
+                print("****** Container Build Error, continuing because --continue-on-error is set")
+    else:
+        print("Skipped")
+
+
+@click.command()
+@click.option('--include', help="only build these containers")
+@click.option('--exclude', help="don\'t build these containers")
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.pass_context
+def command(ctx, include, exclude, force_rebuild, extra_build_args):
+    '''build the set of containers required for a complete stack'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not os.path.isdir(dev_root_path):
+        print('Dev root directory doesn\'t exist, creating')
+
+    # See: https://stackoverflow.com/a/20885799/1701505
+    from stack_orchestrator import data
+    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
+        all_containers = container_list_file.read().splitlines()
+
+    containers_in_scope = []
+    if stack:
+        stack_config = get_parsed_stack_config(stack)
+        containers_in_scope = stack_config['containers']
+    else:
+        containers_in_scope = all_containers
+
+    if verbose:
+        print(f'Containers: {containers_in_scope}')
+        if stack:
+            print(f"Stack: {stack}")
+
+    container_build_env = make_container_build_env(dev_root_path,
+                                                   container_build_dir,
+                                                   debug,
+                                                   force_rebuild,
+                                                   extra_build_args)
+
+    for container in containers_in_scope:
+        if include_exclude_check(container, include, exclude):
+            process_container(stack, container, container_build_dir, container_build_env,
+                              dev_root_path, quiet, verbose, dry_run, continue_on_error)
+        else:
+            if verbose:
+                print(f"Excluding: {container}")
@@ -25,8 +25,8 @@ from decouple import config
 import click
 import importlib.resources
 from python_on_whales import docker, DockerException
-from app.base import get_stack
-from app.util import include_exclude_check, get_parsed_stack_config
+from stack_orchestrator.base import get_stack
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config

 builder_js_image_name = "cerc/builder-js:local"

@@ -83,7 +83,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
        os.makedirs(build_root_path)

    # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
+    from stack_orchestrator import data
    with importlib.resources.open_text(data, "npm-package-list.txt") as package_list_file:
        all_packages = package_list_file.read().splitlines()

@@ -0,0 +1,84 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds webapp containers
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+from decouple import config
+import click
+from pathlib import Path
+from stack_orchestrator.build import build_containers
+from stack_orchestrator.deploy.webapp.util import determine_base_container
+
+
+@click.command()
+@click.option('--base-container')
+@click.option('--source-repo', help="directory containing the webapp to build", required=True)
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.option("--tag", help="Container tag (default: cerc/<app_name>:local)")
+@click.pass_context
+def command(ctx, base_container, source_repo, force_rebuild, extra_build_args, tag):
+    '''build the specified webapp container'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not base_container:
+        base_container = determine_base_container(source_repo)
+
+    # First build the base container.
+    container_build_env = build_containers.make_container_build_env(dev_root_path, container_build_dir, debug,
+                                                                    force_rebuild, extra_build_args)
+
+    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)
+
+    # Now build the target webapp.  We use the same build script, but with a different Dockerfile and work dir.
+    container_build_env["CERC_WEBAPP_BUILD_RUNNING"] = "true"
+    container_build_env["CERC_CONTAINER_BUILD_WORK_DIR"] = os.path.abspath(source_repo)
+    container_build_env["CERC_CONTAINER_BUILD_DOCKERFILE"] = os.path.join(container_build_dir,
+                                                                          base_container.replace("/", "-"),
+                                                                          "Dockerfile.webapp")
+    if not tag:
+        webapp_name = os.path.abspath(source_repo).split(os.path.sep)[-1]
+        container_build_env["CERC_CONTAINER_BUILD_TAG"] = f"cerc/{webapp_name}:local"
+    else:
+        container_build_env["CERC_CONTAINER_BUILD_TAG"] = tag
+
+    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)
@@ -0,0 +1,38 @@
+# Copyright © 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+cluster_name_prefix = "laconic-"
+stack_file_name = "stack.yml"
+spec_file_name = "spec.yml"
+config_file_name = "config.env"
+deployment_file_name = "deployment.yml"
+compose_dir_name = "compose"
+compose_deploy_type = "compose"
+k8s_kind_deploy_type = "k8s-kind"
+k8s_deploy_type = "k8s"
+cluster_id_key = "cluster-id"
+kube_config_key = "kube-config"
+deploy_to_key = "deploy-to"
+network_key = "network"
+http_proxy_key = "http-proxy"
+image_registry_key = "image-registry"
+configmaps_key = "configmaps"
+resources_key = "resources"
+volumes_key = "volumes"
+security_key = "security"
+annotations_key = "annotations"
+labels_key = "labels"
+kind_config_filename = "kind-config.yml"
+kube_config_filename = "kubeconfig.yml"
@@ -4,6 +4,6 @@ services:
    image: cerc/laconic-console-host:local
    environment:
      - CERC_WEBAPP_FILES_DIR=${CERC_WEBAPP_FILES_DIR:-/usr/local/share/.config/yarn/global/node_modules/@cerc-io/console-app/dist/production}
-      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost}
+      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost:9473}
    ports:
      - "80"
@@ -5,7 +5,7 @@ services:
    command: ["sh", "/docker-entrypoint-scripts.d/create-fixturenet.sh"]
    volumes:
      # The cosmos-sdk node's database directory:
-      - laconicd-data:/root/.laconicd/data
+      - laconicd-data:/root/.laconicd
      # TODO: look at folding these scripts into the container
      - ../config/fixturenet-laconicd/create-fixturenet.sh:/docker-entrypoint-scripts.d/create-fixturenet.sh
      - ../config/fixturenet-laconicd/export-mykey.sh:/docker-entrypoint-scripts.d/export-mykey.sh
@@ -6,8 +6,8 @@ services:
  # Deploys the L1 smart contracts (outputs to volume l1_deployment)
  fixturenet-optimism-contracts:
    restart: on-failure
-    hostname: fixturenet-optimism-contracts
    image: cerc/optimism-contracts:local
+    hostname: fixturenet-optimism-contracts
    env_file:
      - ../config/fixturenet-optimism/l1-params.env
    environment:
@@ -17,27 +17,49 @@ services:
      CERC_L1_ACCOUNTS_CSV_URL: ${CERC_L1_ACCOUNTS_CSV_URL}
      CERC_L1_ADDRESS: ${CERC_L1_ADDRESS}
      CERC_L1_PRIV_KEY: ${CERC_L1_PRIV_KEY}
-      CERC_L1_ADDRESS_2: ${CERC_L1_ADDRESS_2}
-      CERC_L1_PRIV_KEY_2: ${CERC_L1_PRIV_KEY_2}
-    # Waits for L1 endpoint to be up before running the script
-    command: |
-      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./run.sh"
    volumes:
      - ../config/network/wait-for-it.sh:/app/packages/contracts-bedrock/wait-for-it.sh
-      - ../config/optimism-contracts/hardhat-tasks/verify-contract-deployment.ts:/app/packages/contracts-bedrock/tasks/verify-contract-deployment.ts
-      - ../config/optimism-contracts/hardhat-tasks/rekey-json.ts:/app/packages/contracts-bedrock/tasks/rekey-json.ts
-      - ../config/optimism-contracts/hardhat-tasks/send-balance.ts:/app/packages/contracts-bedrock/tasks/send-balance.ts
-      - ../config/fixturenet-optimism/optimism-contracts/update-config.js:/app/packages/contracts-bedrock/update-config.js
-      - ../config/fixturenet-optimism/optimism-contracts/run.sh:/app/packages/contracts-bedrock/run.sh
+      - ../config/fixturenet-optimism/optimism-contracts/deploy-contracts.sh:/app/packages/contracts-bedrock/deploy-contracts.sh
      - l2_accounts:/l2-accounts
-      - l1_deployment:/app/packages/contracts-bedrock
+      - l1_deployment:/l1-deployment
+      - l2_config:/l2-config
+    # Waits for L1 endpoint to be up before running the contract deploy script
+    command: |
+      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./deploy-contracts.sh"
+
+  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
+  op-geth:
+    restart: always
+    image: cerc/optimism-l2geth:local
+    hostname: op-geth
+    depends_on:
+      op-node:
+        condition: service_started
+    volumes:
+      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
+      - l2_config:/l2-config:ro
+      - l2_accounts:/l2-accounts:ro
+      - l2_geth_data:/datadir
+    entrypoint: "sh"
+    command: "/run-op-geth.sh"
+    ports:
+      - "8545"
+      - "8546"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost:8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 100
+      start_period: 10s
    extra_hosts:
      - "host.docker.internal:host-gateway"

-  # Generates the config files required for L2 (outputs to volume l2_config)
-  op-node-l2-config-gen:
-    restart: on-failure
+  # Runs the L2 consensus client (Sequencer node)
+  # Generates the L2 config files if not already present (outputs to volume l2_config)
+  op-node:
+    restart: always
    image: cerc/optimism-op-node:local
+    hostname: op-node
    depends_on:
      fixturenet-optimism-contracts:
        condition: service_completed_successfully
@@ -47,61 +69,19 @@ services:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
      CERC_L1_RPC: ${CERC_L1_RPC}
    volumes:
-      - ../config/fixturenet-optimism/generate-l2-config.sh:/app/generate-l2-config.sh
-      - l1_deployment:/contracts-bedrock:ro
-      - l2_config:/app
-    command: ["sh", "/app/generate-l2-config.sh"]
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
-  op-geth:
-    restart: always
-    image: cerc/optimism-l2geth:local
-    depends_on:
-      op-node-l2-config-gen:
-        condition: service_started
-    volumes:
-      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
-      - l2_config:/op-node:ro
+      - ../config/fixturenet-optimism/run-op-node.sh:/run-op-node.sh
+      - l1_deployment:/l1-deployment:ro
+      - l2_config:/l2-config
      - l2_accounts:/l2-accounts:ro
-      - l2_geth_data:/datadir
    entrypoint: "sh"
-    command: "/run-op-geth.sh"
+    command: "/run-op-node.sh"
    ports:
-      - "0.0.0.0:8545:8545"
-      - "0.0.0.0:8546:8546"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost:8545"]
-      interval: 30s
-      timeout: 10s
-      retries: 10
-      start_period: 10s
-
-  # Runs the L2 consensus client (Sequencer node)
-  op-node:
-    restart: always
-    image: cerc/optimism-op-node:local
-    depends_on:
-      op-geth:
-        condition: service_healthy
-    env_file:
-      - ../config/fixturenet-optimism/l1-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_L1_RPC: ${CERC_L1_RPC}
-    volumes:
-      - ../config/fixturenet-optimism/run-op-node.sh:/app/run-op-node.sh
-      - l2_config:/op-node-data:ro
-      - l2_accounts:/l2-accounts:ro
-    command: ["sh", "/app/run-op-node.sh"]
-    ports:
-      - "0.0.0.0:8547:8547"
+      - "8547"
    healthcheck:
      test: ["CMD", "nc", "-vz", "localhost:8547"]
      interval: 30s
      timeout: 10s
-      retries: 10
+      retries: 100
      start_period: 10s
    extra_hosts:
      - "host.docker.internal:host-gateway"
@@ -110,6 +90,7 @@ services:
  op-batcher:
    restart: always
    image: cerc/optimism-op-batcher:local
+    hostname: op-batcher
    depends_on:
      op-node:
        condition: service_healthy
@@ -129,7 +110,7 @@ services:
    command: |
      "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-batcher.sh"
    ports:
-      - "127.0.0.1:8548:8548"
+      - "8548"
    extra_hosts:
      - "host.docker.internal:host-gateway"

@@ -137,25 +118,29 @@ services:
  op-proposer:
    restart: always
    image: cerc/optimism-op-proposer:local
+    hostname: op-proposer
    depends_on:
      op-node:
        condition: service_healthy
+      op-geth:
+        condition: service_healthy
    env_file:
      - ../config/fixturenet-optimism/l1-params.env
    environment:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
      CERC_L1_RPC: ${CERC_L1_RPC}
+      CERC_L1_CHAIN_ID: ${CERC_L1_CHAIN_ID}
    volumes:
      - ../config/network/wait-for-it.sh:/wait-for-it.sh
      - ../config/fixturenet-optimism/run-op-proposer.sh:/run-op-proposer.sh
-      - l1_deployment:/contracts-bedrock:ro
+      - l1_deployment:/l1-deployment:ro
      - l2_accounts:/l2-accounts:ro
    entrypoint: ["sh", "-c"]
    # Waits for L1 endpoint to be up before running the proposer
    command: |
      "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-proposer.sh"
    ports:
-      - "127.0.0.1:8560:8560"
+      - "8560"
    extra_hosts:
      - "host.docker.internal:host-gateway"

@@ -0,0 +1,36 @@
+version: '3.7'
+
+services:
+  # Runs an Urbit fake ship and attempts an app installation using given data
+  # Uploads the app glob to given IPFS endpoint
+  # From urbit_app_builds volume:
+  # - takes app build from ${CERC_URBIT_APP}/build (waits for it to appear)
+  # - takes additional mark files from ${CERC_URBIT_APP}/mar
+  # - takes the docket file from ${CERC_URBIT_APP}/desk.docket-0
+  urbit-fake-ship:
+    restart: unless-stopped
+    image: tloncorp/vere
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_URBIT_APP: ${CERC_URBIT_APP}
+      CERC_ENABLE_APP_INSTALL: ${CERC_ENABLE_APP_INSTALL:-true}
+      CERC_IPFS_GLOB_HOST_ENDPOINT: ${CERC_IPFS_GLOB_HOST_ENDPOINT:-http://ipfs:5001}
+      CERC_IPFS_SERVER_ENDPOINT: ${CERC_IPFS_SERVER_ENDPOINT:-http://ipfs:8080}
+    entrypoint: ["bash", "-c", "./run-urbit-ship.sh && ./deploy-app.sh && tail -f /dev/null"]
+    volumes:
+      - urbit_data:/urbit
+      - urbit_app_builds:/app-builds
+      - ../config/urbit/run-urbit-ship.sh:/urbit/run-urbit-ship.sh
+      - ../config/urbit/deploy-app.sh:/urbit/deploy-app.sh
+    ports:
+      - "80"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "80"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+
+volumes:
+  urbit_data:
+  urbit_app_builds:
@@ -11,10 +11,13 @@ services:
        condition: service_completed_successfully
    environment:
      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
-      CERC_NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
-      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      CERC_NITRO_PK: ${CERC_NITRO_PK:-f36f6dd450892224ee113899195ef922a4795d41c32cafb386d9aab6e0b7b0c6}
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
      CERC_NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
      CERC_NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/data/nitro-store}
+      CERC_NITRO_MSG_PORT: ${CERC_NITRO_MSG_PORT:-3006}
+      CERC_NITRO_WS_MSG_PORT: ${CERC_NITRO_WS_MSG_PORT:-5006}
+      CERC_NITRO_RPC_PORT: ${CERC_NITRO_RPC_PORT:-4006}
      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
@@ -24,25 +27,15 @@ services:
      - nitro_deployment:/app/deployment
      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "4005"]
-      interval: 10s
+      test: ["CMD", "nc", "-vz", "localhost", "4006"]
+      interval: 30s
      timeout: 5s
      retries: 10
      start_period: 10s
    ports:
-      - "3005"
-      - "4005:4005"
-      - "5005:5005"
-
-  nitro-rpc-client:
-      image: cerc/nitro-rpc-client:local
-      hostname: nitro-rpc-client
-      restart: on-failure
-      depends_on:
-        # Wait for the go-nitro node to start
-        go-nitro:
-          condition: service_healthy
-      command: ["bash", "-c", "tail -f /dev/null"]
+      - "3006:3006"
+      - "4006:4006"
+      - "5006:5006"

 volumes:
  go_nitro_data:
@@ -0,0 +1,23 @@
+version: "3.7"
+
+services:
+  grafana:
+    image: grafana/grafana:10.2.2
+    restart: always
+    environment:
+      GF_SERVER_ROOT_URL: ${GF_SERVER_ROOT_URL}
+    volumes:
+      - ../config/monitoring/grafana/provisioning:/etc/grafana/provisioning
+      - ../config/monitoring/grafana/dashboards:/etc/grafana/dashboards
+      - grafana_storage:/var/lib/grafana
+    ports:
+      - "3000"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "3000"]
+      interval: 30s
+      timeout: 5s
+      retries: 10
+      start_period: 3s
+
+volumes:
+  grafana_storage:
@@ -0,0 +1,111 @@
+version: "3.2"
+services:
+  ipld-eth-server-1:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-true}
+      NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
+      NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
+      NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/nitro-data/nitro-store}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - eth_server_nitro_data:/app/nitro-data
+      - nitro_deployment:/app/deployment
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+      - "3005:3005"
+      - "4005:4005"
+      - "5005:5005"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+  ipld-eth-server-2:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-false}
+      NITRO_ENDPOINT: ${CERC_NITRO_ENDPOINT:-go-nitro:4006/api/v1}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+volumes:
+  eth_server_nitro_data:
+  nitro_deployment:
@@ -0,0 +1,24 @@
+version: "3.2"
+
+# See: https://docs.ipfs.tech/install/run-ipfs-inside-docker/#set-up
+services:
+  ipfs:
+    image: ipfs/kubo:v0.24.0
+    restart: always
+    volumes:
+      - ipfs-import:/import
+      - ipfs-data:/data/ipfs
+    ports:
+      - "4001"
+      - "8080"
+      - "0.0.0.0:5001:5001"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5001"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+
+volumes:
+  ipfs-import:
+  ipfs-data:
@@ -0,0 +1,8 @@
+version: "3.2"
+
+services:
+  laconic-dot-com:
+    image: cerc/laconic-dot-com:local
+    restart: always
+    ports:
+      - "3000"
@@ -0,0 +1,29 @@
+version: "3.2"
+
+services:
+  migrations:
+    restart: on-failure
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-db:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+
+  ipld-eth-db:
+    image: timescale/timescaledb:2.8.1-pg14
+    restart: always
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+    volumes:
+      - mainnet_eth_ipld_eth_db:/var/lib/postgresql/data
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      - "5432"
+volumes:
+  mainnet_eth_ipld_eth_db:
@@ -0,0 +1,24 @@
+version: "3.7"
+services:
+  ipld-eth-server:
+    restart: always
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-ipld-eth-server/srv.env
+    volumes:
+      - ../config/mainnet-eth-ipld-eth-server/config.toml:/app/config.toml:ro
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40001"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
--- a/Show More
+++ b/Show More
				`@@ -1 +1,2 @@`
				`Change this file to trigger running the fixturenet-eth-test CI job`
				`@@ -0,0 +1,2 @@`
				`Change this file to trigger running the fixturenet-eth-test CI job`