rm old envs

Co-authored-by: David Boreham <david@bozemanpas.com>
Reviewed-on: cerc-io/stack-orchestrator#747
Co-authored-by: David Boreham <david@bozemanpass.com>
Co-committed-by: David Boreham <david@bozemanpass.com>

.gitea/workflows/fixturenet-eth-plugeth-test.yml

@@ -0,0 +1,49 @@
+name: Fixturenet-Eth-Plugeth-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+
+jobs:
+  test:
+    name: "Run an Ethereum plugeth fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth-plugeth/run-test.sh

.gitea/workflows/fixturenet-eth-test.yml

@@ -2,7 +2,15 @@ name: Fixturenet-Eth-Test
 
 on:
   push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-test'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
 
 jobs:
   test:
@@ -11,8 +19,16 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
         with:
           python-version: '3.8'
       - name: "Print Python version"
@@ -23,5 +39,10 @@ jobs:
         run: ./scripts/create_build_tag_file.sh
       - name: "Build local shiv package"
         run: ./scripts/build_shiv_package.sh
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
       - name: "Run fixturenet-eth tests"
         run: ./tests/fixturenet-eth/run-test.sh
+

.gitea/workflows/fixturenet-laconicd-test.yml

@@ -0,0 +1,48 @@
+name: Fixturenet-Laconicd-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-laconicd-test'
+  schedule:
+    - cron: '1 13 * * *'
+
+jobs:
+  test:
+    name: "Run an Laconicd fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Update'
+        run: apt-get update
+      - name: 'Setup jq'
+        run: apt-get install jq -y
+      - name: 'Check jq'
+        run: |
+          which jq
+          jq --version
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh

.gitea/workflows/lint.yml

@@ -0,0 +1,21 @@
+name: Lint Checks
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run linter"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name : "Run flake8"
+        uses: py-actions/flake8@v2

.gitea/workflows/publish.yml

@@ -5,6 +5,8 @@ on:
     branches:
       - main
       - publish-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
 
 jobs:
   publish:
@@ -18,8 +20,16 @@ jobs:
         run: |
           build_tag=$(./scripts/create_build_tag_file.sh)
           echo "build-tag=v${build_tag}" >> $GITHUB_OUTPUT
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
         with:
           python-version: '3.8'
       - name: "Print Python version"
@@ -37,7 +47,7 @@ jobs:
         run: |
           cp ${{ steps.build.outputs.package-file }} ./laconic-so
       - name: "Create release"
-        uses: cerc-io/action-gh-release@gitea-v1
+        uses: https://gitea.com/cerc-io/action-gh-release@gitea-v2
         with:
           tag_name: ${{ steps.build-info.outputs.build-tag }}
           # On the publish test branch, mark our release as a draft

.gitea/workflows/test-container-registry.yml

@@ -0,0 +1,54 @@
+name: Container Registry Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-container-registry'
+      - '.gitea/workflows/test-container-registry.yml'
+      - 'tests/container-registry/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '6 19 * * *'
+
+jobs:
+  test:
+    name: "Run contaier registry hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Install ed" # Only needed until we remove the need to edit the spec file
+        run: apt update && apt install -y ed
+      - name: "Run container registry deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/container-registry/run-test.sh
+

.gitea/workflows/test-database.yml

@@ -0,0 +1,52 @@
+name: Database Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-database'
+      - '.gitea/workflows/test-database.yml'
+      - 'tests/database/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '5 18 * * *'
+
+jobs:
+  test:
+    name: "Run database hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run database deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/database/run-test.sh
+

.gitea/workflows/test-deploy.yml

@@ -7,6 +7,8 @@ on:
     branches:
       - main
       - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,8 +21,16 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
         with:
           python-version: '3.8'
       - name: "Print Python version"

.gitea/workflows/test-k8s-deploy.yml

@@ -0,0 +1,54 @@
+name: K8s Deploy Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-k8s-deploy'
+      - '.gitea/workflows/test-k8s-deploy.yml'
+      - 'tests/k8s-deploy/run-deploy-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '3 15 * * *'
+
+jobs:
+  test:
+    name: "Run deploy test suite on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run k8s deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/k8s-deploy/run-deploy-test.sh
+

.gitea/workflows/test-webapp.yml

@@ -0,0 +1,51 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches:
+      - main
+      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Install wget" # 20240109 - Only needed until the executors are updated.
+        run: apt update && apt install -y wget
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh

.gitea/workflows/test.yml

@@ -7,6 +7,8 @@ on:
     branches:
       - main
       - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,8 +21,16 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
         with:
           python-version: '3.8'
       - name: "Print Python version"
@@ -37,3 +47,5 @@ jobs:
           sleep 5
       - name: "Run smoke tests"
         run: ./tests/smoke-test/run-smoke-test.sh
+
+

.gitea/workflows/triggers/fixturenet-eth-plugeth-test

@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-eth-plugeth-test CI job
+trigger
+trigger

.gitea/workflows/triggers/fixturenet-eth-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+

.gitea/workflows/triggers/fixturenet-laconicd-test

@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+Trigger
+Trigger

.gitea/workflows/triggers/test-container-registry

@@ -0,0 +1 @@
+Change this file to trigger running the test-container-registry CI job

.gitea/workflows/triggers/test-database

@@ -0,0 +1,2 @@
+Change this file to trigger running the test-database CI job
+Trigger test run

.gitea/workflows/triggers/test-k8s-deploy

@@ -0,0 +1,2 @@
+Change this file to trigger running the test-k8s-deploy CI job
+Trigger test on PR branch

.github/workflows/fixturenet-eth.yml

@@ -0,0 +1,30 @@
+name: Fixturenet-Eth Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-eth-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-eth test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth/run-test.sh

.github/workflows/fixturenet-laconicd.yml

@@ -0,0 +1,30 @@
+name: Fixturenet-Laconicd Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-laconicd-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-laconicd test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh

.github/workflows/lint.yml

@@ -0,0 +1,21 @@
+name: Lint Checks
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run linter"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name : "Run flake8"
+        uses: py-actions/flake8@v2

.github/workflows/test-webapp.yml

@@ -0,0 +1,29 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh

.github/workflows/triggers/fixturenet-eth-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+

.github/workflows/triggers/fixturenet-laconicd-test

@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
+trigger

.gitignore

@@ -6,5 +6,5 @@ laconic_stack_orchestrator.egg-info
 __pycache__
 *~
 package
-app/data/build_tag.txt
-build
+stack_orchestrator/data/build_tag.txt
+/build

README.md

@@ -6,7 +6,7 @@ Stack Orchestrator allows building and deployment of a Laconic Stack on a single
 
 ## Install
 
-**To get started quickly** on a fresh Ubuntu instance (e.g, Digital Ocean); [try this script](./scripts/quick-install-ubuntu.sh). **WARNING:** always review scripts prior to running them so that you know what is happening on your machine.
+**To get started quickly** on a fresh Ubuntu instance (e.g, Digital Ocean); [try this script](./scripts/quick-install-linux.sh). **WARNING:** always review scripts prior to running them so that you know what is happening on your machine.
 
 For any other installation, follow along below and **adapt these instructions based on the specifics of your system.**
 
@@ -16,6 +16,7 @@ Ensure that the following are already installed:
 - [Python3](https://wiki.python.org/moin/BeginnersGuide/Download): `python3 --version` >= `3.8.10` (the Python3 shipped in Ubuntu 20+ is good to go)
 - [Docker](https://docs.docker.com/get-docker/): `docker --version` >= `20.10.21`
 - [jq](https://stedolan.github.io/jq/download/): `jq --version` >= `1.5`
+- [git](https://git-scm.com/book/en/v2/Getting-Started-Installing-Git): `git --version` >= `2.10.3`
 
 Note: if installing docker-compose via package manager on Linux (as opposed to Docker Desktop), you must [install the plugin](https://docs.docker.com/compose/install/linux/#install-the-plugin-manually), e.g. :
 
@@ -28,10 +29,10 @@ chmod +x ~/.docker/cli-plugins/docker-compose
 Next decide on a directory where you would like to put the stack-orchestrator program. Typically this would be 
 a "user" binary directory such as `~/bin` or perhaps `/usr/local/laconic` or possibly just the current working directory.
 
-Now, having selected that directory, download the latest release from [this page](https://github.com/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
+Now, having selected that directory, download the latest release from [this page](https://git.vdb.to/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
 
 ```bash
-curl -L -o ~/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+curl -L -o ~/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 ```
 
 Give it execute permissions:
@@ -48,15 +49,27 @@ Verify operation (your version will probably be different, just check here that
 laconic-so version
 Version: 1.1.0-7a607c2-202304260513
 ```
+Save the distribution url to `~/.laconic-so/config.yml`:
+```bash
+mkdir ~/.laconic-so
+echo "distribution-url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so" >  ~/.laconic-so/config.yml
+```
+
+### Update
+If Stack Orchestrator was installed using the process described above, it is able to subsequently self-update to the current latest version by running:
+
+```bash
+laconic-so update
+```
 
 ## Usage
 
-The various [stacks](/app/data/stacks) each contain instructions for running different stacks based on your use case. For example:
+The various [stacks](/stack_orchestrator/data/stacks) each contain instructions for running different stacks based on your use case. For example:
 
-- [self-hosted Gitea](/app/data/stacks/build-support)
-- [an Optimism Fixturenet](/app/data/stacks/fixturenet-optimism)
-- [laconicd with console and CLI](app/data/stacks/fixturenet-laconic-loaded)
-- [kubo (IPFS)](app/data/stacks/kubo)
+- [self-hosted Gitea](/stack_orchestrator/data/stacks/build-support)
+- [an Optimism Fixturenet](/stack_orchestrator/data/stacks/fixturenet-optimism)
+- [laconicd with console and CLI](stack_orchestrator/data/stacks/fixturenet-laconic-loaded)
+- [kubo (IPFS)](stack_orchestrator/data/stacks/kubo)
 
 ## Contributing
 

app/build_containers.py

@@ -1,141 +0,0 @@
-# Copyright © 2022, 2023 Cerc
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-# Builds or pulls containers for the system components
-
-# env vars:
-# CERC_REPO_BASE_DIR defaults to ~/cerc
-
-# TODO: display the available list of containers; allow re-build of either all or specific containers
-
-import os
-import sys
-from decouple import config
-import subprocess
-import click
-import importlib.resources
-from pathlib import Path
-from .util import include_exclude_check, get_parsed_stack_config
-
-# TODO: find a place for this
-#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
-
-
-@click.command()
-@click.option('--include', help="only build these containers")
-@click.option('--exclude', help="don\'t build these containers")
-@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
-@click.option("--extra-build-args", help="Supply extra arguments to build")
-@click.pass_context
-def command(ctx, include, exclude, force_rebuild, extra_build_args):
-    '''build the set of containers required for a complete stack'''
-
-    quiet = ctx.obj.quiet
-    verbose = ctx.obj.verbose
-    dry_run = ctx.obj.dry_run
-    debug = ctx.obj.debug
-    local_stack = ctx.obj.local_stack
-    stack = ctx.obj.stack
-    continue_on_error = ctx.obj.continue_on_error
-
-    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    container_build_dir = Path(__file__).absolute().parent.joinpath("data", "container-build")
-
-    if local_stack:
-        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
-    else:
-        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
-
-    if not quiet:
-        print(f'Dev Root is: {dev_root_path}')
-
-    if not os.path.isdir(dev_root_path):
-        print('Dev root directory doesn\'t exist, creating')
-
-    # See: https://stackoverflow.com/a/20885799/1701505
-    from . import data
-    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
-        all_containers = container_list_file.read().splitlines()
-
-    containers_in_scope = []
-    if stack:
-        stack_config = get_parsed_stack_config(stack)
-        containers_in_scope = stack_config['containers']
-    else:
-        containers_in_scope = all_containers
-
-    if verbose:
-        print(f'Containers: {containers_in_scope}')
-        if stack:
-            print(f"Stack: {stack}")
-
-    # TODO: make this configurable
-    container_build_env = {
-        "CERC_NPM_REGISTRY_URL": config("CERC_NPM_REGISTRY_URL", default="http://gitea.local:3000/api/packages/cerc-io/npm/"),
-        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
-        "CERC_REPO_BASE_DIR": dev_root_path,
-        "CERC_CONTAINER_BASE_DIR": container_build_dir,
-        "CERC_HOST_UID": f"{os.getuid()}",
-        "CERC_HOST_GID": f"{os.getgid()}",
-        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
-    }
-    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
-    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
-    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
-    docker_host_env = os.getenv("DOCKER_HOST")
-    if docker_host_env:
-        container_build_env.update({"DOCKER_HOST": docker_host_env})
-
-    def process_container(container):
-        if not quiet:
-            print(f"Building: {container}")
-        build_dir = os.path.join(container_build_dir, container.replace("/", "-"))
-        build_script_filename = os.path.join(build_dir, "build.sh")
-        if verbose:
-            print(f"Build script filename: {build_script_filename}")
-        if os.path.exists(build_script_filename):
-            build_command = build_script_filename
-        else:
-            if verbose:
-                print(f"No script file found: {build_script_filename}, using default build script")
-            repo_dir = container.split('/')[1]
-            # TODO: make this less of a hack -- should be specified in some metadata somewhere
-            # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
-            repo_full_path = os.path.join(dev_root_path, repo_dir)
-            repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
-            build_command = os.path.join(container_build_dir, "default-build.sh") + f" {container}:local {repo_dir_or_build_dir}"
-        if not dry_run:
-            if verbose:
-                print(f"Executing: {build_command} with environment: {container_build_env}")
-            build_result = subprocess.run(build_command, shell=True, env=container_build_env)
-            if verbose:
-                print(f"Return code is: {build_result.returncode}")
-            if build_result.returncode != 0:
-                print(f"Error running build for {container}")
-                if not continue_on_error:
-                    print("FATAL Error: container build failed and --continue-on-error not set, exiting")
-                    sys.exit(1)
-                else:
-                    print("****** Container Build Error, continuing because --continue-on-error is set")
-        else:
-            print("Skipped")
-
-    for container in containers_in_scope:
-        if include_exclude_check(container, include, exclude):
-            process_container(container)
-        else:
-            if verbose:
-                print(f"Excluding: {container}")

app/data/compose/docker-compose-kubo.yml

@@ -1,13 +0,0 @@
-version: "3.2"
-# See: https://docs.ipfs.tech/install/run-ipfs-inside-docker/#set-up
-services:
-  ipfs:
-    image: ipfs/kubo:master-2023-02-20-714a968
-    restart: always
-    volumes:
-      - ./ipfs/import:/import
-      - ./ipfs/data:/data/ipfs
-    ports:
-      - "0.0.0.0:8080:8080"
-      - "0.0.0.0:4001:4001"
-      - "0.0.0.0:5001:5001"

app/data/config/fixturenet-laconicd/create-fixturenet.sh

@@ -1,118 +0,0 @@
-#!/bin/bash
-
-# TODO: this file is now an unmodified copy of cerc-io/laconicd/init.sh
-# so we should have a mechanism to bundle it inside the container rather than link from here
-# at deploy time.
-
-KEY="mykey"
-CHAINID="laconic_9000-1"
-MONIKER="localtestnet"
-KEYRING="test"
-KEYALGO="eth_secp256k1"
-LOGLEVEL="info"
-# trace evm
-TRACE="--trace"
-# TRACE=""
-
-# validate dependencies are installed
-command -v jq > /dev/null 2>&1 || { echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"; exit 1; }
-
-# remove existing daemon and client
-rm -rf ~/.laconic*
-
-make install
-
-laconicd config keyring-backend $KEYRING
-laconicd config chain-id $CHAINID
-
-# if $KEY exists it should be deleted
-laconicd keys add $KEY --keyring-backend $KEYRING --algo $KEYALGO
-
-# Set moniker and chain-id for Ethermint (Moniker can be anything, chain-id must be an integer)
-laconicd init $MONIKER --chain-id $CHAINID
-
-# Change parameter token denominations to aphoton
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["staking"]["params"]["bond_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["crisis"]["constant_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["gov"]["deposit_params"]["min_deposit"][0]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["mint"]["params"]["mint_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-# Custom modules
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commit_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveal_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_minimum_bid"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-if [[ "$TEST_REGISTRY_EXPIRY" == "true" ]]; then
-  echo "Setting timers for expiry tests."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-if [[ "$TEST_AUCTION_ENABLED" == "true" ]]; then
-  echo "Enabling auction and setting timers."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_enabled"]=true' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="300s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-# increase block time (?)
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["time_iota_ms"]="1000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# Set gas limit in genesis
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["max_gas"]="10000000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# disable produce empty block
-if [[ "$OSTYPE" == "darwin"* ]]; then
-    sed -i '' 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-  else
-    sed -i 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-fi
-
-if [[ $1 == "pending" ]]; then
-  if [[ "$OSTYPE" == "darwin"* ]]; then
-      sed -i '' 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  else
-      sed -i 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  fi
-fi
-
-# Allocate genesis accounts (cosmos formatted addresses)
-laconicd add-genesis-account $KEY 100000000000000000000000000aphoton --keyring-backend $KEYRING
-
-# Sign genesis transaction
-laconicd gentx $KEY 1000000000000000000000aphoton --keyring-backend $KEYRING --chain-id $CHAINID
-
-# Collect genesis tx
-laconicd collect-gentxs
-
-# Run this to ensure everything worked and that the genesis file is setup correctly
-laconicd validate-genesis
-
-if [[ $1 == "pending" ]]; then
-  echo "pending mode is on, please wait for the first block committed."
-fi
-
-# Start the node (remove the --pruning=nothing flag if historical queries are not needed)
-laconicd start --pruning=nothing --evm.tracer=json $TRACE --log_level $LOGLEVEL --minimum-gas-prices=0.0001aphoton --json-rpc.api eth,txpool,personal,net,debug,web3,miner --api.enable --gql-server --gql-playground

app/data/config/fixturenet-lotus/genesis/.genesis-sectors/cache/s-t01000-0/p_aux

@@ -1 +0,0 @@
-}+V�{iνΆΠΉ�²�¨ΣΗ\k»qς␍—?δΪAΒfκ’~μ©™LΉ�tb
·yqτ·²ηξΔ�Ο?ξaΣ�J

app/data/config/fixturenet-lotus/genesis/.genesis-sectors/cache/s-t01000-0/sc-02-data-tree-r-last.dat

@@ -1 +0,0 @@
-Βfκ’~μ©™LΉ�tb
·yqτ·²ηξΔ�Ο?ξaΣ�J

app/data/config/fixturenet-lotus/genesis/.genesis-sectors/pre-seal-t01000.json

@@ -1,71 +0,0 @@
-{
-  "t01000": {
-    "ID": "t01000",
-    "Owner": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-    "Worker": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-    "PeerId": "12D3KooWG5q6pWJVdPBhDBv9AjWVbUh4xxTAZ7xvgZSjczWuD2Z9",
-    "MarketBalance": "0",
-    "PowerBalance": "0",
-    "SectorSize": 2048,
-    "Sectors": [
-      {
-        "CommR": {
-          "/": "bagboea4b5abcboxypcewlkmrat2myu4vthk3ii2pcomak7nhqmdbb6sxlolp2wdf"
-        },
-        "CommD": {
-          "/": "baga6ea4seaqn3jfixthmdgksv4vhfeuyvr6upw6tvaqbmzmsyxnzosm4pwgnmlq"
-        },
-        "SectorID": 0,
-        "Deal": {
-          "PieceCID": {
-            "/": "baga6ea4seaqn3jfixthmdgksv4vhfeuyvr6upw6tvaqbmzmsyxnzosm4pwgnmlq"
-          },
-          "PieceSize": 2048,
-          "VerifiedDeal": false,
-          "Client": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-          "Provider": "t01000",
-          "Label": "0",
-          "StartEpoch": 0,
-          "EndEpoch": 9001,
-          "StoragePricePerEpoch": "0",
-          "ProviderCollateral": "0",
-          "ClientCollateral": "0"
-        },
-        "DealClientKey": {
-          "Type": "bls",
-          "PrivateKey": "tFvSRiSg2G3Ssgg0PSYy23XyjaIMXpsmdyG2B7UFLT4="
-        },
-        "ProofType": 5
-      },
-      {
-        "CommR": {
-          "/": "bagboea4b5abcb6krzypqcczhcnbeyjcqkeo6omfergm336o3kitugh3jgjog2yqq"
-        },
-        "CommD": {
-          "/": "baga6ea4seaqhondpb2373hjasjplxvbjzi5n5mm4fbbhjxp5ptnbq4cibapkeii"
-        },
-        "SectorID": 1,
-        "Deal": {
-          "PieceCID": {
-            "/": "baga6ea4seaqhondpb2373hjasjplxvbjzi5n5mm4fbbhjxp5ptnbq4cibapkeii"
-          },
-          "PieceSize": 2048,
-          "VerifiedDeal": false,
-          "Client": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-          "Provider": "t01000",
-          "Label": "1",
-          "StartEpoch": 0,
-          "EndEpoch": 9001,
-          "StoragePricePerEpoch": "0",
-          "ProviderCollateral": "0",
-          "ClientCollateral": "0"
-        },
-        "DealClientKey": {
-          "Type": "bls",
-          "PrivateKey": "tFvSRiSg2G3Ssgg0PSYy23XyjaIMXpsmdyG2B7UFLT4="
-        },
-        "ProofType": 5
-      }
-    ]
-  }
-}

app/data/config/fixturenet-lotus/genesis/.genesis-sectors/pre-seal-t01000.key

@@ -1 +0,0 @@
-7b2254797065223a22626c73222c22507269766174654b6579223a227446765352695367324733537367673050535979323358796a61494d5870736d64794732423755464c54343d227d

app/data/config/fixturenet-lotus/genesis/.genesis-sectors/sectorstore.json

@@ -1,11 +0,0 @@
-{
-  "ID": "f355523e-69d0-4984-bd0e-9588487c6231",
-  "Weight": 0,
-  "CanSeal": false,
-  "CanStore": false,
-  "MaxStorage": 0,
-  "Groups": null,
-  "AllowTo": null,
-  "AllowTypes": null,
-  "DenyTypes": null
-}

app/data/config/fixturenet-lotus/genesis/localnet.json

@@ -1,108 +0,0 @@
-{
-  "NetworkVersion": 18,
-  "Accounts": [
-    {
-      "Type": "account",
-      "Balance": "50000000000000000000000000",
-      "Meta": {
-        "Owner": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q"
-      }
-    }
-  ],
-  "Miners": [
-    {
-      "ID": "t01000",
-      "Owner": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-      "Worker": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-      "PeerId": "12D3KooWG5q6pWJVdPBhDBv9AjWVbUh4xxTAZ7xvgZSjczWuD2Z9",
-      "MarketBalance": "0",
-      "PowerBalance": "0",
-      "SectorSize": 2048,
-      "Sectors": [
-        {
-          "CommR": {
-            "/": "bagboea4b5abcboxypcewlkmrat2myu4vthk3ii2pcomak7nhqmdbb6sxlolp2wdf"
-          },
-          "CommD": {
-            "/": "baga6ea4seaqn3jfixthmdgksv4vhfeuyvr6upw6tvaqbmzmsyxnzosm4pwgnmlq"
-          },
-          "SectorID": 0,
-          "Deal": {
-            "PieceCID": {
-              "/": "baga6ea4seaqn3jfixthmdgksv4vhfeuyvr6upw6tvaqbmzmsyxnzosm4pwgnmlq"
-            },
-            "PieceSize": 2048,
-            "VerifiedDeal": false,
-            "Client": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-            "Provider": "t01000",
-            "Label": "0",
-            "StartEpoch": 0,
-            "EndEpoch": 9001,
-            "StoragePricePerEpoch": "0",
-            "ProviderCollateral": "0",
-            "ClientCollateral": "0"
-          },
-          "DealClientKey": {
-            "Type": "bls",
-            "PrivateKey": "tFvSRiSg2G3Ssgg0PSYy23XyjaIMXpsmdyG2B7UFLT4="
-          },
-          "ProofType": 5
-        },
-        {
-          "CommR": {
-            "/": "bagboea4b5abcb6krzypqcczhcnbeyjcqkeo6omfergm336o3kitugh3jgjog2yqq"
-          },
-          "CommD": {
-            "/": "baga6ea4seaqhondpb2373hjasjplxvbjzi5n5mm4fbbhjxp5ptnbq4cibapkeii"
-          },
-          "SectorID": 1,
-          "Deal": {
-            "PieceCID": {
-              "/": "baga6ea4seaqhondpb2373hjasjplxvbjzi5n5mm4fbbhjxp5ptnbq4cibapkeii"
-            },
-            "PieceSize": 2048,
-            "VerifiedDeal": false,
-            "Client": "t3spusn5ia57qezc3fwpe3n2lhb4y4xt67xoflqbqy2muliparw2uktevletuv7gl4qakjpafgcl7jk2s2er3q",
-            "Provider": "t01000",
-            "Label": "1",
-            "StartEpoch": 0,
-            "EndEpoch": 9001,
-            "StoragePricePerEpoch": "0",
-            "ProviderCollateral": "0",
-            "ClientCollateral": "0"
-          },
-          "DealClientKey": {
-            "Type": "bls",
-            "PrivateKey": "tFvSRiSg2G3Ssgg0PSYy23XyjaIMXpsmdyG2B7UFLT4="
-          },
-          "ProofType": 5
-        }
-      ]
-    }
-  ],
-  "NetworkName": "localnet-6d52dae5-ff29-4bac-a45d-f84e6c07564c",
-  "VerifregRootKey": {
-    "Type": "multisig",
-    "Balance": "0",
-    "Meta": {
-      "Signers": [
-        "t1ceb34gnsc6qk5dt6n7xg6ycwzasjhbxm3iylkiy"
-      ],
-      "Threshold": 1,
-      "VestingDuration": 0,
-      "VestingStart": 0
-    }
-  },
-  "RemainderAccount": {
-    "Type": "multisig",
-    "Balance": "0",
-    "Meta": {
-      "Signers": [
-        "t1ceb34gnsc6qk5dt6n7xg6ycwzasjhbxm3iylkiy"
-      ],
-      "Threshold": 1,
-      "VestingDuration": 0,
-      "VestingStart": 0
-    }
-  }
-}

app/data/config/fixturenet-lotus/lotus-env.env

@@ -1,5 +0,0 @@
-LOTUS_PATH=~/.lotus-local-net
-LOTUS_MINER_PATH=~/.lotus-miner-local-net
-LOTUS_SKIP_GENESIS_CHECK=_yes_
-CGO_CFLAGS_ALLOW="-D__BLST_PORTABLE__"
-CGO_CFLAGS="-D__BLST_PORTABLE__"

app/data/config/fixturenet-lotus/setup-miner.sh

@@ -1,39 +0,0 @@
-#!/bin/bash
-
-lotus --version
-
-# # remove old bootnode peer info if present
-# [ -f /root/.lotus-shared/miner.addr ] && rm /root/.lotus-shared/miner.addr
-
-##TODO: generate genesis files inside container instead of bundling in config dir
-##something like commands below should work, other scripts/compose will have to be updated to corresponding directories
-# lotus fetch-params 2048
-# lotus-seed pre-seal --sector-size 2KiB --num-sectors 2
-# lotus-seed genesis new localnet.json
-# lotus-seed genesis add-miner localnet.json ~/.genesis-sectors/pre-seal-t01000.json
-
-
-# start daemon
-nohup lotus daemon  --genesis=/devgen.car --profile=bootstrapper --bootstrap=false > /var/log/lotus.log 2>&1 &
-
-# Loop until the daemon is started
-echo "Waiting for daemon to start..."
-while ! grep -q "started ChainNotify channel" /var/log/lotus.log ; do
-    sleep 5
-done
-echo "Daemon started."
-
-# publish bootnode peer info to shared volume
-lotus net listen | awk 'NR==1{print}' > /root/.lotus-shared/miner.addr
-
-# if miner not already initialized
-if [ ! -d /root/.lotus-miner-local-net ]; then
-  # initialize miner
-  lotus wallet import --as-default ~/.genesis-sectors/pre-seal-t01000.key
-  lotus-miner init --genesis-miner --actor=t01000 --sector-size=2KiB --pre-sealed-sectors=~/.genesis-sectors --pre-sealed-metadata=~/.genesis-sectors/pre-seal-t01000.json --nosync
-fi
-
-# start miner
-nohup lotus-miner run --nosync &
-
-tail -f /dev/null

app/data/config/fixturenet-lotus/setup-node.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-
-lotus --version
-
-##TODO: paths can use values from lotus-env.env file
-
-# if not already initialized
-if [ ! -f /root/.lotus-local-net/config.toml ]; then
-  # init node config
-  mkdir $HOME/.lotus-local-net
-  lotus config default > $HOME/.lotus-local-net/config.toml
-
-  # add bootstrap peer info if available
-  if [ -f /root/.lotus-shared/miner.addr ]; then
-    MINER_ADDR=\"$(cat /root/.lotus-shared/miner.addr)\"
-    # add bootstrap peer id to config file
-    sed -i "/^\[Libp2p\]/a \ \ BootstrapPeers = [$MINER_ADDR]" $HOME/.lotus-local-net/config.toml
-  else
-    echo "Bootstrap peer info not found, unable to configure. Manual peering will be required."
-  fi
-fi
-
-# start node
-lotus daemon --genesis=/devgen.car

app/data/config/fixturenet-optimism/generate-l2-config.sh

@@ -1,37 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Check existing config if it exists
-if [ -f /app/jwt.txt ] && [ -f /app/rollup.json ]; then
-  echo "Found existing L2 config, cross-checking with L1 deployment config"
-
-  SOURCE_L1_CONF=$(cat /contracts-bedrock/deploy-config/getting-started.json)
-  EXP_L1_BLOCKHASH=$(echo "$SOURCE_L1_CONF" | jq -r '.l1StartingBlockTag')
-  EXP_BATCHER=$(echo "$SOURCE_L1_CONF" | jq -r '.batchSenderAddress')
-
-  GEN_L2_CONF=$(cat /app/rollup.json)
-  GEN_L1_BLOCKHASH=$(echo "$GEN_L2_CONF" | jq -r '.genesis.l1.hash')
-  GEN_BATCHER=$(echo "$GEN_L2_CONF" | jq -r '.genesis.system_config.batcherAddr')
-
-  if [ "$EXP_L1_BLOCKHASH" = "$GEN_L1_BLOCKHASH" ] && [ "$EXP_BATCHER" = "$GEN_BATCHER" ]; then
-    echo "Config cross-checked, exiting"
-    exit 0
-  fi
-
-  echo "Existing L2 config doesn't match the L1 deployment config, please clear L2 config volume before starting"
-  exit 1
-fi
-
-op-node genesis l2 \
-  --deploy-config /contracts-bedrock/deploy-config/getting-started.json \
-  --deployment-dir /contracts-bedrock/deployments/getting-started/ \
-  --outfile.l2 /app/genesis.json \
-  --outfile.rollup /app/rollup.json \
-  --l1-rpc $CERC_L1_RPC
-
-openssl rand -hex 32 > /app/jwt.txt

app/data/config/fixturenet-optimism/optimism-contracts/run.sh

@@ -1,131 +0,0 @@
-#!/bin/bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_CHAIN_ID="${CERC_L1_CHAIN_ID:-${DEFAULT_CERC_L1_CHAIN_ID}}"
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-CERC_L1_ACCOUNTS_CSV_URL="${CERC_L1_ACCOUNTS_CSV_URL:-${DEFAULT_CERC_L1_ACCOUNTS_CSV_URL}}"
-
-echo "Using L1 RPC endpoint ${CERC_L1_RPC}"
-
-IMPORT_1="import './verify-contract-deployment'"
-IMPORT_2="import './rekey-json'"
-IMPORT_3="import './send-balance'"
-
-# Append mounted tasks to tasks/index.ts file if not present
-if ! grep -Fxq "$IMPORT_1" tasks/index.ts; then
-  echo "$IMPORT_1" >> tasks/index.ts
-  echo "$IMPORT_2" >> tasks/index.ts
-  echo "$IMPORT_3" >> tasks/index.ts
-fi
-
-# Update the chainId in the hardhat config
-sed -i "/getting-started/ {n; s/.*chainId.*/      chainId: $CERC_L1_CHAIN_ID,/}" hardhat.config.ts
-
-# Exit if a deployment already exists (on restarts)
-# Note: fixturenet-eth-geth currently starts fresh on a restart
-if [ -d "deployments/getting-started" ]; then
-  echo "Deployment directory deployments/getting-started found, checking SystemDictator deployment"
-
-  # Read JSON file into variable
-  SYSTEM_DICTATOR_DETAILS=$(cat deployments/getting-started/SystemDictator.json)
-
-  # Parse JSON into variables
-  SYSTEM_DICTATOR_ADDRESS=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.address')
-  SYSTEM_DICTATOR_TXHASH=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.transactionHash')
-
-  if yarn hardhat verify-contract-deployment --contract "${SYSTEM_DICTATOR_ADDRESS}" --transaction-hash "${SYSTEM_DICTATOR_TXHASH}"; then
-    echo "Deployment verfication successful, exiting"
-    exit 0
-  else
-    echo "Deployment verfication failed, please clear L1 deployment volume before starting"
-    exit 1
-  fi
-fi
-
-# Generate the L2 account addresses
-yarn hardhat rekey-json --output /l2-accounts/keys.json
-
-# Read JSON file into variable
-KEYS_JSON=$(cat /l2-accounts/keys.json)
-
-# Parse JSON into variables
-ADMIN_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Admin.address')
-ADMIN_PRIV_KEY=$(echo "$KEYS_JSON" | jq -r '.Admin.privateKey')
-PROPOSER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Proposer.address')
-BATCHER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Batcher.address')
-SEQUENCER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Sequencer.address')
-
-# Get the private keys of L1 accounts
-if [ -n "$CERC_L1_ACCOUNTS_CSV_URL" ] && \
-  l1_accounts_response=$(curl -L --write-out '%{http_code}' --silent --output /dev/null "$CERC_L1_ACCOUNTS_CSV_URL") && \
-  [ "$l1_accounts_response" -eq 200 ];
-then
-  echo "Fetching L1 account credentials using provided URL"
-  mkdir -p /geth-accounts
-  wget -O /geth-accounts/accounts.csv "$CERC_L1_ACCOUNTS_CSV_URL"
-
-  CERC_L1_ADDRESS=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 2)
-  CERC_L1_PRIV_KEY=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
-  CERC_L1_ADDRESS_2=$(awk -F, 'NR==2{print $(NF-1)}' /geth-accounts/accounts.csv)
-  CERC_L1_PRIV_KEY_2=$(awk -F, 'NR==2{print $NF}' /geth-accounts/accounts.csv)
-else
-  echo "Couldn't fetch L1 account credentials, using them from env"
-fi
-
-# Send balances to the above L2 addresses
-yarn hardhat send-balance --to "${ADMIN_ADDRESS}" --amount 2 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${PROPOSER_ADDRESS}" --amount 5 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${BATCHER_ADDRESS}" --amount 1000 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-
-echo "Balances sent to L2 accounts"
-
-# Select a finalized L1 block as the starting point for roll ups
-until FINALIZED_BLOCK=$(cast block finalized --rpc-url "$CERC_L1_RPC"); do
-    echo "Waiting for a finalized L1 block to exist, retrying after 10s"
-    sleep 10
-done
-
-L1_BLOCKNUMBER=$(echo "$FINALIZED_BLOCK" | awk '/number/{print $2}')
-L1_BLOCKHASH=$(echo "$FINALIZED_BLOCK" | awk '/hash/{print $2}')
-L1_BLOCKTIMESTAMP=$(echo "$FINALIZED_BLOCK" | awk '/timestamp/{print $2}')
-
-echo "Selected L1 block ${L1_BLOCKNUMBER} as the starting block for roll ups"
-
-# Update the deployment config
-sed -i 's/"l2OutputOracleStartingTimestamp": TIMESTAMP/"l2OutputOracleStartingTimestamp": '"$L1_BLOCKTIMESTAMP"'/g' deploy-config/getting-started.json
-jq --arg chainid "$CERC_L1_CHAIN_ID" '.l1ChainID = ($chainid | tonumber)' deploy-config/getting-started.json > tmp.json && mv tmp.json deploy-config/getting-started.json
-
-node update-config.js deploy-config/getting-started.json "$ADMIN_ADDRESS" "$PROPOSER_ADDRESS" "$BATCHER_ADDRESS" "$SEQUENCER_ADDRESS" "$L1_BLOCKHASH"
-
-echo "Updated the deployment config"
-
-# Create a .env file
-echo "L1_RPC=$CERC_L1_RPC" > .env
-echo "PRIVATE_KEY_DEPLOYER=$ADMIN_PRIV_KEY" >> .env
-
-echo "Deploying the L1 smart contracts, this will take a while..."
-
-# Deploy the L1 smart contracts
-yarn hardhat deploy --network getting-started --tags l1
-
-echo "Deployed the L1 smart contracts"
-
-# Read Proxy contract's JSON and get the address
-PROXY_JSON=$(cat deployments/getting-started/Proxy__OVM_L1StandardBridge.json)
-PROXY_ADDRESS=$(echo "$PROXY_JSON" | jq -r '.address')
-
-# Send balance to the above Proxy contract in L1 for reflecting balance in L2
-# First account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-# Second account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY_2}" --network getting-started
-
-echo "Balance sent to Proxy L2 contract"
-echo "Use following accounts for transactions in L2:"
-echo "${CERC_L1_ADDRESS}"
-echo "${CERC_L1_ADDRESS_2}"
-echo "Done"

app/data/config/fixturenet-optimism/optimism-contracts/update-config.js

@@ -1,36 +0,0 @@
-const fs = require('fs')
-
-// Get the command-line argument
-const configFile = process.argv[2]
-const adminAddress = process.argv[3]
-const proposerAddress = process.argv[4]
-const batcherAddress = process.argv[5]
-const sequencerAddress = process.argv[6]
-const blockHash = process.argv[7]
-
-// Read the JSON file
-const configData = fs.readFileSync(configFile)
-const configObj = JSON.parse(configData)
-
-// Update the finalSystemOwner property with the ADMIN_ADDRESS value
-configObj.finalSystemOwner =
-  configObj.portalGuardian =
-  configObj.controller =
-  configObj.l2OutputOracleChallenger =
-  configObj.proxyAdminOwner =
-  configObj.baseFeeVaultRecipient =
-  configObj.l1FeeVaultRecipient =
-  configObj.sequencerFeeVaultRecipient =
-  configObj.governanceTokenOwner =
-    adminAddress
-
-configObj.l2OutputOracleProposer = proposerAddress
-
-configObj.batchSenderAddress = batcherAddress
-
-configObj.p2pSequencerAddress = sequencerAddress
-
-configObj.l1StartingBlockTag = blockHash
-
-// Write the updated JSON object back to the file
-fs.writeFileSync(configFile, JSON.stringify(configObj, null, 2))

app/data/config/fixturenet-optimism/run-op-geth.sh

@@ -1,90 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-# TODO: Add in container build or use other tool
-echo "Installing jq"
-apk update && apk add jq
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Initialize op-geth if datadir/geth not found
-if [ -f /op-node/jwt.txt ] && [ -d datadir/geth ]; then
-  echo "Found existing datadir, checking block signer key"
-
-  BLOCK_SIGNER_KEY=$(cat datadir/block-signer-key)
-
-  if [ "$SEQUENCER_KEY" = "$BLOCK_SIGNER_KEY" ]; then
-    echo "Sequencer and block signer keys match, skipping initialization"
-  else
-    echo "Sequencer and block signer keys don't match, please clear L2 geth data volume before starting"
-    exit 1
-  fi
-else
-  echo "Initializing op-geth"
-
-  mkdir -p datadir
-  echo "pwd" > datadir/password
-  echo $SEQUENCER_KEY > datadir/block-signer-key
-
-  geth account import --datadir=datadir --password=datadir/password datadir/block-signer-key
-
-  while [ ! -f "/op-node/jwt.txt" ]
-  do
-    echo "Config files not created. Checking after 5 seconds."
-    sleep 5
-  done
-
-  echo "Config files created by op-node, proceeding with the initialization..."
-
-  geth init --datadir=datadir /op-node/genesis.json
-  echo "Node Initialized"
-fi
-
-SEQUENCER_ADDRESS=$(jq -r '.Sequencer.address' /l2-accounts/keys.json | tr -d '"')
-echo "SEQUENCER_ADDRESS: ${SEQUENCER_ADDRESS}"
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${geth_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-geth
-geth \
-  --datadir ./datadir \
-  --http \
-  --http.corsdomain="*" \
-  --http.vhosts="*" \
-  --http.addr=0.0.0.0 \
-  --http.api=web3,debug,eth,txpool,net,engine \
-  --ws \
-  --ws.addr=0.0.0.0 \
-  --ws.port=8546 \
-  --ws.origins="*" \
-  --ws.api=debug,eth,txpool,net,engine \
-  --syncmode=full \
-  --gcmode=archive \
-  --nodiscover \
-  --maxpeers=0 \
-  --networkid=42069 \
-  --authrpc.vhosts="*" \
-  --authrpc.addr=0.0.0.0 \
-  --authrpc.port=8551 \
-  --authrpc.jwtsecret=/op-node/jwt.txt \
-  --rollup.disabletxpoolgossip=true \
-  --password=./datadir/password \
-  --allow-insecure-unlock \
-  --mine \
-  --miner.etherbase=$SEQUENCER_ADDRESS \
-  --unlock=$SEQUENCER_ADDRESS \
-  &
-
-geth_pid=$!
-wait $geth_pid

app/data/config/fixturenet-optimism/run-op-node.sh

@@ -1,26 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Run op-node
-op-node \
-  --l2=http://op-geth:8551 \
-  --l2.jwt-secret=/op-node-data/jwt.txt \
-  --sequencer.enabled \
-  --sequencer.l1-confs=3 \
-  --verifier.l1-confs=3 \
-  --rollup.config=/op-node-data/rollup.json \
-  --rpc.addr=0.0.0.0 \
-  --rpc.port=8547 \
-  --p2p.disable \
-  --rpc.enable-admin \
-  --p2p.sequencer.key=$SEQUENCER_KEY \
-  --l1=$CERC_L1_RPC \
-  --l1.rpckind=any

app/data/config/fixturenet-optimism/run-op-proposer.sh

@@ -1,36 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Read the L2OutputOracle contract address from the deployment
-L2OO_DEPLOYMENT=$(cat /contracts-bedrock/deployments/getting-started/L2OutputOracle.json)
-L2OO_ADDR=$(echo "$L2OO_DEPLOYMENT" | jq -r '.address')
-
-# Get Proposer key from keys.json
-PROPOSER_KEY=$(jq -r '.Proposer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${proposer_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-proposer
-op-proposer \
-  --poll-interval 12s \
-  --rpc.port 8560 \
-  --rollup-rpc http://op-node:8547 \
-  --l2oo-address $L2OO_ADDR \
-  --private-key $PROPOSER_KEY \
-  --l1-eth-rpc $CERC_L1_RPC \
-  &
-
-proposer_pid=$!
-wait $proposer_pid

app/data/config/watcher-azimuth/watcher-params.env

@@ -1,5 +0,0 @@
-# Defaults
-
-# ipld-eth-server endpoints
-DEFAULT_CERC_IPLD_ETH_RPC=
-DEFAULT_CERC_IPLD_ETH_GQL=

app/data/container-build/cerc-fixturenet-eth-geth/Dockerfile

@@ -1,27 +0,0 @@
-FROM skylenet/ethereum-genesis-generator@sha256:210353ce7c898686bc5092f16c61220a76d357f51eff9c451e9ad1b9ad03d4d3 AS ethgen
-
-# Using the same golang image as used to build geth: https://github.com/cerc-io/go-ethereum/blob/HEAD/Dockerfile
-FROM golang:1.18-alpine as delve
-RUN go install github.com/go-delve/delve/cmd/dlv@latest
-
-FROM cerc/go-ethereum:local as geth
-
-FROM alpine:3.17
-RUN apk add --no-cache python3 python3-dev py3-pip curl wget jq build-base gettext libintl openssl bash bind-tools postgresql-client
-
-COPY --from=delve  /go/bin/dlv /usr/local/bin/
-COPY --from=ethgen /usr/local/bin/eth2-testnet-genesis /usr/local/bin/
-COPY --from=ethgen /usr/local/bin/eth2-val-tools /usr/local/bin/
-COPY --from=ethgen /apps /apps
-
-RUN cd /apps/el-gen && pip3 install -r requirements.txt
-
-COPY genesis /opt/testnet
-COPY run-el.sh /opt/testnet/run.sh
-
-RUN cd /opt/testnet && make genesis-el
-
-COPY --from=geth  /usr/local/bin/geth /usr/local/bin/
-RUN geth --datadir ~/ethdata init /opt/testnet/build/el/geth.json && rm -f ~/ethdata/geth/nodekey
-
-ENTRYPOINT ["/opt/testnet/run.sh"]

app/data/container-build/cerc-laconic-console-host/config.yml

@@ -1,6 +0,0 @@
-# Config for laconic-console running in a fixturenet with laconicd
-
-services:
-  wns:
-    server: 'LACONIC_HOSTED_ENDPOINT:9473/api'
-    webui: 'LACONIC_HOSTED_ENDPOINT:9473/console'

app/data/container-build/cerc-laconic-console-host/start-serving-app.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-    set -x
-fi
-# TODO: Don't hard wire this:
-webapp_files_dir=/usr/local/share/.config/yarn/global/node_modules/@cerc-io/console-app/dist/production
-/scripts/apply-webapp-config.sh /config/config.yml ${webapp_files_dir}
-http-server -p 80 ${webapp_files_dir}

app/data/container-build/cerc-laconic-registry-cli/create-demo-records.sh

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-# Create some demo/test records in the registry
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-registry_command="laconic cns"
-record_1_filename=demo-record-1.yml
-cat <<EOF > ${record_1_filename}
-record:
-  type: WebsiteRegistrationRecord
-  url: 'https://cerc.io'
-  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
-  build_artifact_cid: QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
-  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
-  version: 1.0.23
-EOF
-# Check we have funds
-funds_response=$(${registry_command} account get --address $(cat my-address.txt))
-funds_balance=$(echo ${funds_response} | jq -r .[0].balance[0].quantity)
-echo "Balance is: ${funds_balance}"
-# Create a bond
-bond_create_result=$(${registry_command} bond create --type aphoton --quantity 1000000000)
-bond_id=$(echo ${bond_create_result} | jq -r .bondId)
-echo "Created bond with id: ${bond_id}"
-# Publish a demo record
-publish_response=$(${registry_command} record publish --filename ${record_1_filename} --bond-id ${bond_id})
-published_record_id=$(echo ${publish_response} | jq -r .id)
-echo "Published ${record_1_filename} with id: ${published_record_id}"

app/data/container-build/cerc-lighthouse/Dockerfile

@@ -1,8 +0,0 @@
-FROM sigp/lighthouse:v4.1.0-modern
-
-RUN apt-get update; apt-get install bash netcat curl less jq -y;
-
-WORKDIR /root/
-ADD start-lighthouse.sh .
-
-ENTRYPOINT [ "./start-lighthouse.sh" ]

app/data/container-build/cerc-mobymask-ui/apply-webapp-config.sh

@@ -1,42 +0,0 @@
-#!/usr/bin/env bash
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-    set -x
-fi
-if [[ $# -ne 3 ]]; then
-    echo "Illegal number of parameters" >&2
-    exit 1
-fi
-config_file_name=$1
-webapp_files_dir=$2
-config_prefix=$3
-if ! [[ -f ${config_file_name} ]]; then
-    echo "Config file ${config_file_name} does not exist" >&2
-    exit 1
-fi
-if ! [[ -d ${webapp_files_dir} ]]; then
-    echo "Webapp directory ${webapp_files_dir} does not exist" >&2
-    exit 1
-fi
-# First some magic using sed to translate our yaml config file into an array of key value pairs like:
-# ${config_prefix}<path-through-objects>=<value>
-# sed "s/'//g" is used to remove single quote for relayNodes value
-readarray -t config_kv_pair_array < <( sed -E 's/([^:]+):\s*(.*)/\1=\2/g' ${config_file_name} | sed "s/'//g" |  sed "s/^/${config_prefix}_/" )
-declare -p config_kv_pair_array
-# Then iterate over that kv array making the template substitution in our web app files
-for kv_pair_string in "${config_kv_pair_array[@]}"
-do
-    kv_pair=(${kv_pair_string//=/ })
-    template_string_to_replace=${kv_pair[0]}
-    template_value_to_substitute=${kv_pair[1]}
-    # Run find and sed to do the substitution of one variable over all files
-    # See: https://stackoverflow.com/a/21479607/1701505
-    echo "Substituting: ${template_string_to_replace} = ${template_value_to_substitute}"
-
-    # TODO: Pass keys to be replaced without double quotes
-    if [[ "$template_string_to_replace" =~ ^${config_prefix}_(relayNodes|chainId|denyMultiaddrs)$ ]]; then
-        find ${webapp_files_dir} -type f -exec sed -i 's#"'"${template_string_to_replace}"'"#'"${template_value_to_substitute}"'#g' {} +
-    else
-        # Note: we do not escape our strings, on the expectation they do not container the '#' char.
-        find ${webapp_files_dir} -type f -exec sed -i 's#'${template_string_to_replace}'#'${template_value_to_substitute}'#g' {} +
-    fi
-done

app/data/container-build/cerc-mobymask-ui/start-serving-app.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-    set -x
-fi
-
-# TODO: Don't hard wire this:
-webapp_files_dir="/usr/local/share/.config/yarn/global/node_modules/${CERC_BUILD_DIR}"
-/scripts/apply-webapp-config.sh /config/config.yml ${webapp_files_dir} MOBYMASK_HOSTED_CONFIG
-http-server -p 80 ${webapp_files_dir}

app/data/container-build/cerc-test-container/run.sh

@@ -1,19 +0,0 @@
-#!/usr/bin/env bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-# Test if the container's filesystem is old (run previously) or new
-EXISTSFILENAME=/var/exists
-echo "Test container starting"
-if [[ -f "$EXISTSFILENAME" ]];
-then
-    TIMESTAMP=`cat $EXISTSFILENAME`
-    echo "Filesystem is old, created: $TIMESTAMP" 
-else
-    echo "Filesystem is fresh"
-    echo `date` > $EXISTSFILENAME
-fi
-
-# Run nginx which will block here forever
-/usr/sbin/nginx -g "daemon off;"

app/data/container-build/cerc-watcher-erc20/Dockerfile

@@ -1,13 +0,0 @@
-FROM node:16.17.1-alpine3.16
-
-RUN apk --update --no-cache add git python3 alpine-sdk
-
-WORKDIR /app
-
-COPY . .
-
-RUN echo "Building watcher-ts" && \
-    git checkout v0.2.19 && \
-    yarn && yarn build
-
-WORKDIR /app/packages/erc20-watcher

app/data/stacks/azimuth/README.md

@@ -1,72 +0,0 @@
-# Azimuth Watcher
-
-Instructions to setup and deploy Azimuth Watcher stack
-
-## Setup
-
-Prerequisite: `ipld-eth-server` RPC and GQL endpoints
-
-Clone required repositories:
-
-```bash
-laconic-so --stack azimuth setup-repositories
-```
-
-NOTE: If the repository already exists and checked out to a different version, `setup-repositories` command will throw an error.
-For getting around this, the `azimuth-watcher-ts` repository can be removed and then run the command.
-
-Checkout to the required versions and branches in repos
-
-```bash
-# azimuth-watcher-ts
-cd ~/cerc/azimuth-watcher-ts
-git checkout v0.1.0
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack azimuth build-containers
-```
-
-This should create the required docker images in the local image registry.
-
-### Configuration
-
-* Create and update an env file to be used in the next step:
-
-  ```bash
-  # External ipld-eth-server endpoints
-  CERC_IPLD_ETH_RPC=
-  CERC_IPLD_ETH_GQL=
-  ```
-
-* NOTE: If `ipld-eth-server` is running on the host machine, use `host.docker.internal` as the hostname to access host ports
-
-### Deploy the stack
-
-* Deploy the containers:
-
-  ```bash
-  laconic-so --stack azimuth deploy-system --env-file <PATH_TO_ENV_FILE> up
-  ```
-
-* List and check the health status of all the containers using `docker ps` and wait for them to be `healthy`
-
-## Clean up
-
-Stop all the services running in background run:
-
-```bash
-laconic-so --stack azimuth deploy-system down
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*watcher_db_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*watcher_db_data")
-```

app/data/stacks/chain-chunker/stack.yml

@@ -1,13 +0,0 @@
-version: "1.0"
-name: chain-chunker
-decription: "Stack to build containers for chain-chunker"
-repos:
-  - github.com/cerc-io/ipld-eth-state-snapshot
-  - github.com/cerc-io/eth-statediff-service
-  - github.com/cerc-io/ipld-eth-db
-  - github.com/cerc-io/ipld-eth-server
-containers:
-  - cerc/ipld-eth-state-snapshot
-  - cerc/eth-statediff-service
-  - cerc/ipld-eth-db
-  - cerc/ipld-eth-server

app/data/stacks/fixturenet-eth-tx/stack.yml

@@ -1,18 +0,0 @@
-version: "1.2"
-name: fixturenet-eth-tx
-decription: "Ethereum Fixturenet w/ tx-spammer"
-repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/tx-spammer
-  - dboreham/foundry
-containers:
-  - cerc/go-ethereum
-  - cerc/lighthouse
-  - cerc/fixturenet-eth-geth
-  - cerc/fixturenet-eth-lighthouse
-  - cerc/tx-spammer
-  - cerc/foundry
-pods:
-  - fixturenet-eth
-  - foundry
-  - tx-spammer

app/data/stacks/fixturenet-lotus/README.md

@@ -1,28 +0,0 @@
-# Lotus Fixturenet
-
-Instructions for deploying a local Lotus (Filecoin) chain for development and testing purposes using laconic-stack-orchestrator.
-
-## 1. Clone required repositories
-```
-$ laconic-so --stack fixturenet-lotus setup-repositories
-```
-## 2. Build the stack's packages and containers
-```
-$ laconic-so --stack fixturenet-lotus build-containers
-```
-## 3. Deploy the stack
-```
-$ laconic-so --stack fixturenet-lotus deploy up
-```
-Correct operation should be verified by checking the container logs with:
-```
-$ laconic-so --stack fixturenet-lotus deploy logs lotus-miner
-$ laconic-so --stack fixturenet-lotus deploy logs lotus-node-1
-$ laconic-so --stack fixturenet-lotus deploy logs lotus-node-2
-```
-or by checking the chain status on each node:
-```
-$ laconic-so --stack fixturenet-lotus deploy exec lotus-miner "lotus status"
-$ laconic-so --stack fixturenet-lotus deploy exec lotus-node-1 "lotus status"
-$ laconic-so --stack fixturenet-lotus deploy exec lotus-node-2 "lotus status"
-```

app/data/stacks/fixturenet-optimism/README.md

@@ -1,128 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy an end-to-end L1+L2 stack with [fixturenet-eth](../fixturenet-eth/) (L1) and [Optimism](https://stack.optimism.io) (L2)
-
-We support running just the L2 part of stack, given an external L1 endpoint. Follow the [L2 only doc](./l2-only.md) for the same.
-
-## Setup
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Checkout to the required versions and branches in repos:
-
-```bash
-# Optimism
-cd ~/cerc/optimism
-git checkout v1.0.4
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers
-```
-
-Note: this will take >10 mins depending on the specs of your machine, and **requires** 16GB of memory or greater.
-
-This should create the required docker images in the local image registry:
-* `cerc/go-ethereum`
-* `cerc/lighthouse`
-* `cerc/fixturenet-eth-geth`
-* `cerc/fixturenet-eth-lighthouse`
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy up
-```
-
-If you get the error `service "fixturenet-optimism-contracts" didn't complete successfully: exit 1` with ~25 lines of Traceback, wait 15-20 mins then re-run the command.
-
-The `fixturenet-optimism-contracts` service takes a while to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-
-To list and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-* If `op-geth` service aborts or is restarted, the following error might occur in the `op-node` service:
-
-  ```bash
-  WARN [02-16|21:22:02.868] Derivation process temporary error       attempts=14 err="stage 0 failed resetting: temp: failed to find the L2 Heads to start from: failed to fetch L2 block by hash 0x0000000000000000000000000000000000000000000000000000000000000000: failed to determine block-hash of hash 0x0000000000000000000000000000000000000000000000000000000000000000, could not get payload: not found"
-  ```
-
-* This means that the data directory that `op-geth` is using is corrupted and needs to be reinitialized; the containers `op-geth`, `op-node` and `op-batcher` need to be started afresh:
-
-  WARNING: This will reset the L2 chain; consequently, all the data on it will be lost
-
-  * Stop and remove the concerned containers:
-
-    ```bash
-    # List the containers
-    docker ps -f "name=op-geth|op-node|op-batcher"
-
-    # Force stop and remove the listed containers
-    docker rm -f $(docker ps -qf "name=op-geth|op-node|op-batcher")
-    ```
-
-  * Remove the concerned volume:
-
-    ```bash
-    # List the volume
-    docker volume ls -q --filter name=l2_geth_data
-
-    # Remove the listed volume
-    docker volume rm $(docker volume ls -q --filter name=l2_geth_data)
-    ```
-
-  * Re-run the deployment command used in [Deploy](#deploy) to restart the stopped containers
-
-## Known Issues
-
-* `fixturenet-eth` currently starts fresh on a restart
-* Resource requirements (memory + time) for building the `cerc/foundry` image are on the higher side
-  * `cerc/optimism-contracts` image is currently based on `cerc/foundry` (Optimism requires foundry installation)

app/data/stacks/fixturenet-optimism/l2-only.md

@@ -1,108 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy L2 fixturenet using [Optimism](https://stack.optimism.io)
-
-## Setup
-
-Prerequisite: An L1 Ethereum RPC endpoint
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories --exclude github.com/cerc-io/go-ethereum
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Checkout to the required versions and branches in repos:
-
-```bash
-# Optimism
-cd ~/cerc/optimism
-git checkout v1.0.4
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers --include cerc/foundry,cerc/optimism-contracts,cerc/optimism-op-node,cerc/optimism-l2geth,cerc/optimism-op-batcher,cerc/optimism-op-proposer
-```
-
-This should create the required docker images in the local image registry:
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Create and update an env file to be used in the next step ([defaults](../../config/fixturenet-optimism/l1-params.env)):
-
-  ```bash
-  # External L1 endpoint
-  CERC_L1_CHAIN_ID=
-  CERC_L1_RPC=
-  CERC_L1_HOST=
-  CERC_L1_PORT=
-
-  # URL to get CSV with credentials for accounts on L1
-  # that are used to send balance to Optimism Proxy contract
-  # (enables them to do transactions on L2)
-  CERC_L1_ACCOUNTS_CSV_URL=
-
-  # OR
-  # Specify the required account credentials
-  CERC_L1_ADDRESS=
-  CERC_L1_PRIV_KEY=
-  CERC_L1_ADDRESS_2=
-  CERC_L1_PRIV_KEY_2=
-  ```
-
-* NOTE: If L1 is running on the host machine, use `host.docker.internal` as the hostname to access the host port
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism --env-file <PATH_TO_ENV_FILE> up
-```
-
-The `fixturenet-optimism-contracts` service may take a while (`~15 mins`) to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-
-To list down and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-See [Troubleshooting](./README.md#troubleshooting)

app/data/stacks/mobymask/README.md

@@ -1,53 +0,0 @@
-# MobyMask
-
-The MobyMask watcher is a Laconic Network component that provides efficient access to MobyMask contract data from Ethereum, along with evidence allowing users to verify the correctness of that data. The watcher source code is available in [this repository](https://github.com/cerc-io/watcher-ts/tree/main/packages/mobymask-watcher) and a developer-oriented Docker Compose setup for the watcher can be found [here](https://github.com/cerc-io/mobymask-watcher). The watcher can be deployed automatically using the Laconic Stack Orchestrator tool as detailed below:
-
-## Deploy the MobyMask Watcher
-
-The instructions below show how to deploy a MobyMask watcher using laconic-stack-orchestrator (the installation of which is covered [here](https://github.com/cerc-io/stack-orchestrator#user-mode)).
-
-This deployment expects that ipld-eth-server's endpoints are available on the local machine at http://ipld-eth-server.example.com:8083/graphql and http://ipld-eth-server.example.com:8082. More advanced configurations are supported by modifying the watcher's [config file](../../config/watcher-mobymask/mobymask-watcher.toml).
-
-## Clone required repositories
-
-```
-$ laconic-so setup-repositories --include github.com/cerc-io/watcher-ts
-```
-
-## Build the watcher container
-
-```
-$ laconic-so build-containers --include cerc/watcher-mobymask
-```
-
-This should create a container with tag `cerc/watcher-mobymask` in the local image registry.
-
-## Deploy the stack
-
-First the watcher database has to be initialized. Start only the mobymask-watcher-db service:
-
-```
-$ laconic-so deploy-system --include watcher-mobymask up mobymask-watcher-db
-```
-
-Next find the container's id using `docker ps` then run the following command to initialize the database:
-
-```
-$ docker exec -i <mobymask-watcher-db-container> psql -U vdbm mobymask-watcher < config/watcher-mobymask/mobymask-watcher-db.sql
-```
-
-Finally start the remaining containers:
-
-```
-$ laconic-so deploy-system --include watcher-mobymask up
-```
-
-Correct operation should be verified by following the instructions [here](https://github.com/cerc-io/mobymask-watcher/tree/main/mainnet-watcher-only#run), checking GraphQL queries return valid results in the watcher's [playground](http://127.0.0.1:3001/graphql).
-
-## Clean up
-
-Stop all the services running in background:
-
-```bash
-$ laconic-so deploy-system --include watcher-mobymask down
-```

app/data/stacks/package-registry/stack.yml

@@ -1,15 +0,0 @@
-version: "1.1"
-name: package-registry
-decription: "Local Package Registry"
-repos:
-  - github.com/cerc-io/hosting
-  - gitea.com/gitea/act_runner
-containers:
-  - cerc/act-runner
-  - cerc/act-runner-task-executor
-pods:
-  - name: gitea
-    repository: cerc-io/hosting
-    path: gitea
-    pre_start_command: "run-this-first.sh"
-    post_start_command: "initialize-gitea.sh"

app/deploy_system.py

@@ -1,378 +0,0 @@
-# Copyright © 2022, 2023 Cerc
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-# Deploys the system components using docker-compose
-
-import hashlib
-import copy
-import os
-import sys
-from dataclasses import dataclass
-from decouple import config
-import subprocess
-from python_on_whales import DockerClient, DockerException
-import click
-import importlib.resources
-from pathlib import Path
-from .util import include_exclude_check, get_parsed_stack_config
-
-class DeployCommandContext(object):
-    def __init__(self, cluster_context, docker):
-        self.cluster_context = cluster_context
-        self.docker = docker
-
-
-@click.group()
-@click.option("--include", help="only start these components")
-@click.option("--exclude", help="don\'t start these components")
-@click.option("--env-file", help="env file to be used")
-@click.option("--cluster", help="specify a non-default cluster name")
-@click.pass_context
-def command(ctx, include, exclude, env_file, cluster):
-    '''deploy a stack'''
-
-    cluster_context = _make_cluster_context(ctx.obj, include, exclude, cluster, env_file)
-
-    # See: https://gabrieldemarmiesse.github.io/python-on-whales/sub-commands/compose/
-    docker = DockerClient(compose_files=cluster_context.compose_files, compose_project_name=cluster_context.cluster,
-                          compose_env_file=cluster_context.env_file)
-
-    ctx.obj = DeployCommandContext(cluster_context, docker)
-    # Subcommand is executed now, by the magic of click
-
-
-@command.command()
-@click.argument('extra_args', nargs=-1)  # help: command: up <service1> <service2>
-@click.pass_context
-def up(ctx, extra_args):
-    global_context = ctx.parent.parent.obj
-    extra_args_list = list(extra_args) or None
-    if not global_context.dry_run:
-        cluster_context = ctx.obj.cluster_context
-        container_exec_env = _make_runtime_env(global_context)
-        for attr, value in container_exec_env.items():
-            os.environ[attr] = value
-        if global_context.verbose:
-            print(f"Running compose up with container_exec_env: {container_exec_env}, extra_args: {extra_args_list}")
-        for pre_start_command in cluster_context.pre_start_commands:
-            _run_command(global_context, cluster_context.cluster, pre_start_command)
-        ctx.obj.docker.compose.up(detach=True, services=extra_args_list)
-        for post_start_command in cluster_context.post_start_commands:
-            _run_command(global_context, cluster_context.cluster, post_start_command)
-        _orchestrate_cluster_config(global_context, cluster_context.config, ctx.obj.docker, container_exec_env)
-
-
-@command.command()
-@click.option("--delete-volumes/--preserve-volumes", default=False, help="delete data volumes")
-@click.argument('extra_args', nargs=-1)  # help: command: down<service1> <service2>
-@click.pass_context
-def down(ctx, delete_volumes, extra_args):
-    global_context = ctx.parent.parent.obj
-    extra_args_list = list(extra_args) or None
-    if not global_context.dry_run:
-        if global_context.verbose:
-            print("Running compose down")
-        timeout_arg = None
-        if extra_args_list:
-            timeout_arg = extra_args_list[0]
-        # Specify shutdown timeout (default 10s) to give services enough time to shutdown gracefully
-        ctx.obj.docker.compose.down(timeout=timeout_arg, volumes=delete_volumes)
-
-
-@command.command()
-@click.pass_context
-def ps(ctx):
-    global_context = ctx.parent.parent.obj
-    if not global_context.dry_run:
-        if global_context.verbose:
-            print("Running compose ps")
-        container_list = ctx.obj.docker.compose.ps()
-        if len(container_list) > 0:
-            print("Running containers:")
-            for container in container_list:
-                print(f"id: {container.id}, name: {container.name}, ports: ", end="")
-                ports = container.network_settings.ports
-                comma = ""
-                for port_mapping in ports.keys():
-                    mapping = ports[port_mapping]
-                    print(comma, end="")
-                    if mapping is None:
-                        print(f"{port_mapping}", end="")
-                    else:
-                        print(f"{mapping[0]['HostIp']}:{mapping[0]['HostPort']}->{port_mapping}", end="")
-                    comma = ", "
-                print()
-        else:
-            print("No containers running")
-
-
-@command.command()
-@click.argument('extra_args', nargs=-1)  # help: command: port <service1> <service2>
-@click.pass_context
-def port(ctx, extra_args):
-    global_context = ctx.parent.parent.obj
-    extra_args_list = list(extra_args) or None
-    if not global_context.dry_run:
-        if extra_args_list is None or len(extra_args_list) < 2:
-            print("Usage: port <service> <exposed-port>")
-            sys.exit(1)
-        service_name = extra_args_list[0]
-        exposed_port = extra_args_list[1]
-        if global_context.verbose:
-            print(f"Running compose port {service_name} {exposed_port}")
-        mapped_port_data = ctx.obj.docker.compose.port(service_name, exposed_port)
-        print(f"{mapped_port_data[0]}:{mapped_port_data[1]}")
-
-
-@command.command()
-@click.argument('extra_args', nargs=-1)  # help: command: exec <service> <command>
-@click.pass_context
-def exec(ctx, extra_args):
-    global_context = ctx.parent.parent.obj
-    extra_args_list = list(extra_args) or None
-    if not global_context.dry_run:
-        if extra_args_list is None or len(extra_args_list) < 2:
-            print("Usage: exec <service> <cmd>")
-            sys.exit(1)
-        service_name = extra_args_list[0]
-        command_to_exec = ["sh", "-c"] + extra_args_list[1:]
-        container_exec_env = _make_runtime_env(global_context)
-        if global_context.verbose:
-            print(f"Running compose exec {service_name} {command_to_exec}")
-        try:
-            ctx.obj.docker.compose.execute(service_name, command_to_exec, envs=container_exec_env)
-        except DockerException as error:
-            print(f"container command returned error exit status")
-
-
-@command.command()
-@click.argument('extra_args', nargs=-1)  # help: command: logs <service1> <service2>
-@click.pass_context
-def logs(ctx, extra_args):
-    global_context = ctx.parent.parent.obj
-    extra_args_list = list(extra_args) or None
-    if not global_context.dry_run:
-        if global_context.verbose:
-            print("Running compose logs")
-        logs_output = ctx.obj.docker.compose.logs(services=extra_args_list if extra_args_list is not None else [])
-        print(logs_output)
-
-
-def get_stack_status(ctx, stack):
-
-    ctx_copy = copy.copy(ctx)
-    ctx_copy.stack = stack
-
-    cluster_context = _make_cluster_context(ctx_copy, None, None, None, None)
-    docker = DockerClient(compose_files=cluster_context.compose_files, compose_project_name=cluster_context.cluster)
-    # TODO: refactor to avoid duplicating this code above
-    if ctx.verbose:
-        print("Running compose ps")
-    container_list = docker.compose.ps()
-    if len(container_list) > 0:
-        if ctx.debug:
-            print(f"Container list from compose ps: {container_list}")
-        return True
-    else:
-        if ctx.debug:
-            print("No containers found from compose ps")
-        False
-
-
-def _make_runtime_env(ctx):
-    container_exec_env = {
-        "CERC_HOST_UID": f"{os.getuid()}",
-        "CERC_HOST_GID": f"{os.getgid()}"
-    }
-    container_exec_env.update({"CERC_SCRIPT_DEBUG": "true"} if ctx.debug else {})
-    return container_exec_env
-
-
-def _make_cluster_context(ctx, include, exclude, cluster, env_file):
-
-    if ctx.local_stack:
-        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
-    else:
-        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
-
-    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    compose_dir = Path(__file__).absolute().parent.joinpath("data", "compose")
-
-    if cluster is None:
-        # Create default unique, stable cluster name from confile file path and stack name if provided
-        # TODO: change this to the config file path
-        path = os.path.realpath(sys.argv[0])
-        unique_cluster_descriptor = f"{path},{ctx.stack},{include},{exclude}"
-        if ctx.debug:
-            print(f"pre-hash descriptor: {unique_cluster_descriptor}")
-        hash = hashlib.md5(unique_cluster_descriptor.encode()).hexdigest()
-        cluster = f"laconic-{hash}"
-        if ctx.verbose:
-            print(f"Using cluster name: {cluster}")
-
-    # See: https://stackoverflow.com/a/20885799/1701505
-    from . import data
-    with importlib.resources.open_text(data, "pod-list.txt") as pod_list_file:
-        all_pods = pod_list_file.read().splitlines()
-
-    pods_in_scope = []
-    if ctx.stack:
-        stack_config = get_parsed_stack_config(ctx.stack)
-        # TODO: syntax check the input here
-        pods_in_scope = stack_config['pods']
-        cluster_config = stack_config['config'] if 'config' in stack_config else None
-    else:
-        pods_in_scope = all_pods
-        cluster_config = None
-
-    # Convert all pod definitions to v1.1 format
-    pods_in_scope = _convert_to_new_format(pods_in_scope)
-
-    if ctx.verbose:
-        print(f"Pods: {pods_in_scope}")
-
-    # Construct a docker compose command suitable for our purpose
-
-    compose_files = []
-    pre_start_commands = []
-    post_start_commands = []
-    for pod in pods_in_scope:
-        pod_name = pod["name"]
-        pod_repository = pod["repository"]
-        pod_path = pod["path"]
-        if include_exclude_check(pod_name, include, exclude):
-            if pod_repository is None or pod_repository == "internal":
-                compose_file_name = os.path.join(compose_dir, f"docker-compose-{pod_path}.yml")
-            else:
-                pod_root_dir = os.path.join(dev_root_path, pod_repository.split("/")[-1], pod["path"])
-                compose_file_name = os.path.join(pod_root_dir, "docker-compose.yml")
-                pod_pre_start_command = pod["pre_start_command"]
-                pod_post_start_command = pod["post_start_command"]
-                if pod_pre_start_command is not None:
-                    pre_start_commands.append(os.path.join(pod_root_dir, pod_pre_start_command))
-                if pod_post_start_command is not None:
-                    post_start_commands.append(os.path.join(pod_root_dir, pod_post_start_command))
-            compose_files.append(compose_file_name)
-        else:
-            if ctx.verbose:
-                print(f"Excluding: {pod_name}")
-
-    if ctx.verbose:
-        print(f"files: {compose_files}")
-
-    return cluster_context(cluster, compose_files, pre_start_commands, post_start_commands, cluster_config, env_file)
-
-
-class cluster_context:
-    def __init__(self, cluster, compose_files, pre_start_commands, post_start_commands, config, env_file) -> None:
-        self.cluster = cluster
-        self.compose_files = compose_files
-        self.pre_start_commands = pre_start_commands
-        self.post_start_commands = post_start_commands
-        self.config = config
-        self.env_file = env_file
-
-
-def _convert_to_new_format(old_pod_array):
-    new_pod_array = []
-    for old_pod in old_pod_array:
-        if isinstance(old_pod, dict):
-            new_pod_array.append(old_pod)
-        else:
-            new_pod = {
-                "name": old_pod,
-                "repository": "internal",
-                "path": old_pod
-            }
-            new_pod_array.append(new_pod)
-    return new_pod_array
-
-
-def _run_command(ctx, cluster_name, command):
-    if ctx.verbose:
-        print(f"Running command: {command}")
-    command_dir = os.path.dirname(command)
-    command_file = os.path.join(".", os.path.basename(command))
-    command_env = os.environ.copy()
-    command_env["CERC_SO_COMPOSE_PROJECT"] = cluster_name
-    if ctx.debug:
-        command_env["CERC_SCRIPT_DEBUG"] = "true"
-    command_result = subprocess.run(command_file, shell=True, env=command_env, cwd=command_dir)
-    if command_result.returncode != 0:
-        print(f"FATAL Error running command: {command}")
-        sys.exit(1)
-
-
-def _orchestrate_cluster_config(ctx, cluster_config, docker, container_exec_env):
-
-    @dataclass
-    class ConfigDirective:
-        source_container: str
-        source_variable: str
-        destination_container: str
-        destination_variable: str
-
-    if cluster_config is not None:
-        for container in cluster_config:
-            container_config = cluster_config[container]
-            if ctx.verbose:
-                print(f"{container} config: {container_config}")
-            for directive in container_config:
-                pd = ConfigDirective(
-                    container_config[directive].split(".")[0],
-                    container_config[directive].split(".")[1],
-                    container,
-                    directive
-                )
-                if ctx.verbose:
-                    print(f"Setting {pd.destination_container}.{pd.destination_variable}"
-                          f" = {pd.source_container}.{pd.source_variable}")
-                # TODO: add a timeout
-                waiting_for_data = True
-                while waiting_for_data:
-                    # TODO: fix the script paths so they're consistent between containers
-                    source_value = None
-                    try:
-                        source_value = docker.compose.execute(pd.source_container,
-                                                              ["sh", "-c",
-                                                                  "sh /docker-entrypoint-scripts.d/export-"
-                                                                  f"{pd.source_variable}.sh"],
-                                                              tty=False,
-                                                              envs=container_exec_env)
-                    except DockerException as error:
-                        if ctx.debug:
-                            print(f"Docker exception reading config source: {error}")
-                        # If the script executed failed for some reason, we get:
-                        # "It returned with code 1"
-                        if "It returned with code 1" in str(error):
-                            if ctx.verbose:
-                                print("Config export script returned an error, re-trying")
-                        # If the script failed to execute (e.g. the file is not there) then we get:
-                        # "It returned with code 2"
-                        if "It returned with code 2" in str(error):
-                            print(f"Fatal error reading config source: {error}")
-                    if source_value:
-                        if ctx.debug:
-                            print(f"fetched source value: {source_value}")
-                        destination_output = docker.compose.execute(pd.destination_container,
-                                                                    ["sh", "-c",
-                                                                        f"sh /scripts/import-{pd.destination_variable}.sh"
-                                                                        f" {source_value}"],
-                                                                    tty=False,
-                                                                    envs=container_exec_env)
-                        waiting_for_data = False
-                    if ctx.debug:
-                        print(f"destination output: {destination_output}")

app/setup_repositories.py

@@ -1,193 +0,0 @@
-# Copyright © 2022 Cerc
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-# env vars:
-# CERC_REPO_BASE_DIR defaults to ~/cerc
-
-import os
-import sys
-from decouple import config
-import git
-from tqdm import tqdm
-import click
-import importlib.resources
-from pathlib import Path
-import yaml
-from .util import include_exclude_check
-
-
-class GitProgress(git.RemoteProgress):
-    def __init__(self):
-        super().__init__()
-        self.pbar = tqdm(unit='B', ascii=True, unit_scale=True)
-
-    def update(self, op_code, cur_count, max_count=None, message=''):
-        self.pbar.total = max_count
-        self.pbar.n = cur_count
-        self.pbar.refresh()
-
-
-def is_git_repo(path):
-    try:
-        _ = git.Repo(path).git_dir
-        return True
-    except git.exc.InvalidGitRepositoryError:
-        return False
-
-# TODO: find a place for this in the context of click
-# parser = argparse.ArgumentParser(
-#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
-#   )
-
-
-@click.command()
-@click.option("--include", help="only clone these repositories")
-@click.option("--exclude", help="don\'t clone these repositories")
-@click.option('--git-ssh', is_flag=True, default=False)
-@click.option('--check-only', is_flag=True, default=False)
-@click.option('--pull', is_flag=True, default=False)
-@click.option('--branches-file', help="checkout branches specified in this file")
-@click.pass_context
-def command(ctx, include, exclude, git_ssh, check_only, pull, branches_file):
-    '''git clone the set of repositories required to build the complete system from source'''
-
-    quiet = ctx.obj.quiet
-    verbose = ctx.obj.verbose
-    dry_run = ctx.obj.dry_run
-    stack = ctx.obj.stack
-
-    branches = []
-
-    # TODO: branches file needs to be re-worked in the context of stacks
-    if branches_file:
-        if verbose:
-            print(f"loading branches from: {branches_file}")
-        with open(branches_file) as branches_file_open:
-            branches = branches_file_open.read().splitlines()
-        if verbose:
-            print(f"Branches are: {branches}")
-
-    local_stack = ctx.obj.local_stack
-
-    if local_stack:
-        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f"Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}")
-    else:
-        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
-
-    if not quiet:
-        print(f"Dev Root is: {dev_root_path}")
-
-    if not os.path.isdir(dev_root_path):
-        if not quiet:
-            print('Dev root directory doesn\'t exist, creating')
-        os.makedirs(dev_root_path)
-
-    # See: https://stackoverflow.com/a/20885799/1701505
-    from . import data
-    with importlib.resources.open_text(data, "repository-list.txt") as repository_list_file:
-        all_repos = repository_list_file.read().splitlines()
-
-    repos_in_scope = []
-    if stack:
-        # In order to be compatible with Python 3.8 we need to use this hack to get the path:
-        # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-        stack_file_path = Path(__file__).absolute().parent.joinpath("data", "stacks", stack, "stack.yml")
-        with stack_file_path:
-            stack_config = yaml.safe_load(open(stack_file_path, "r"))
-            # TODO: syntax check the input here
-            repos_in_scope = stack_config['repos']
-    else:
-        repos_in_scope = all_repos
-
-    if verbose:
-        print(f"Repos: {repos_in_scope}")
-        if stack:
-            print(f"Stack: {stack}")
-
-    repos = []
-    for repo in repos_in_scope:
-        if include_exclude_check(repo, include, exclude):
-            repos.append(repo)
-        else:
-            if verbose:
-                print(f"Excluding: {repo}")
-
-    def host_and_path_for_repo(fully_qualified_repo):
-        repo_split = fully_qualified_repo.split("/")
-        # Legacy unqualified repo means github
-        if len(repo_split) == 2:
-            return "github.com", "/".join(repo_split)
-        else:
-            if len(repo_split) == 3:
-                # First part is the host
-                return repo_split[0], "/".join(repo_split[1:])
-
-    def process_repo(fully_qualified_repo):
-        repo_host, repo_path = host_and_path_for_repo(fully_qualified_repo)
-        git_ssh_prefix = f"git@{repo_host}:"
-        git_http_prefix = f"https://{repo_host}/"
-        full_github_repo_path = f"{git_ssh_prefix if git_ssh else git_http_prefix}{repo_path}"
-        repoName = repo_path.split("/")[-1]
-        full_filesystem_repo_path = os.path.join(dev_root_path, repoName)
-        is_present = os.path.isdir(full_filesystem_repo_path)
-        if not quiet:
-            present_text = f"already exists active branch: {git.Repo(full_filesystem_repo_path).active_branch}" if is_present \
-                else 'Needs to be fetched'
-            print(f"Checking: {full_filesystem_repo_path}: {present_text}")
-        # Quick check that it's actually a repo
-        if is_present:
-            if not is_git_repo(full_filesystem_repo_path):
-                print(f"Error: {full_filesystem_repo_path} does not contain a valid git repository")
-                sys.exit(1)
-            else:
-                if pull:
-                    if verbose:
-                        print(f"Running git pull for {full_filesystem_repo_path}")
-                    if not check_only:
-                        git_repo = git.Repo(full_filesystem_repo_path)
-                        origin = git_repo.remotes.origin
-                        origin.pull(progress=None if quiet else GitProgress())
-                    else:
-                        print("(git pull skipped)")
-        if not is_present:
-            # Clone
-            if verbose:
-                print(f'Running git clone for {full_github_repo_path} into {full_filesystem_repo_path}')
-            if not dry_run:
-                git.Repo.clone_from(full_github_repo_path,
-                                    full_filesystem_repo_path,
-                                    progress=None if quiet else GitProgress())
-            else:
-                print("(git clone skipped)")
-        # Checkout the requested branch, if one was specified
-        if branches:
-            # Find the current repo in the branches list
-            for repo_branch in branches:
-                repo_branch_tuple = repo_branch.split(" ")
-                if repo_branch_tuple[0] == repo:
-                    # checkout specified branch
-                    branch_to_checkout = repo_branch_tuple[1]
-                    if verbose:
-                        print(f"checking out branch {branch_to_checkout} in repo {repo}")
-                        git_repo = git.Repo(full_filesystem_repo_path)
-                        git_repo.git.checkout(branch_to_checkout)
-
-    for repo in repos:
-        try:
-            process_repo(repo)
-        except git.exc.GitCommandError as error:
-            print(f"\n******* git command returned error exit status:\n{error}")
-            sys.exit(1)

app/util.py

@@ -1,50 +0,0 @@
-# Copyright © 2022, 2023 Cerc
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-import os.path
-import sys
-import yaml
-from pathlib import Path
-
-
-def include_exclude_check(s, include, exclude):
-    if include is None and exclude is None:
-        return True
-    if include is not None:
-        include_list = include.split(",")
-        return s in include_list
-    if exclude is not None:
-        exclude_list = exclude.split(",")
-        return s not in exclude_list
-
-
-def get_parsed_stack_config(stack):
-    # In order to be compatible with Python 3.8 we need to use this hack to get the path:
-    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    stack_file_path = Path(__file__).absolute().parent.joinpath("data", "stacks", stack, "stack.yml")
-    try:
-        with stack_file_path:
-            stack_config = yaml.safe_load(open(stack_file_path, "r"))
-            return stack_config
-    except FileNotFoundError as error:
-        # We try here to generate a useful diagnostic error
-        # First check if the stack directory is present
-        stack_directory = stack_file_path.parent
-        if os.path.exists(stack_directory):
-            print(f"Error: stack.yml file is missing from stack: {stack}")
-        else:
-            print(f"Error: stack: {stack} does not exist")
-        print(f"Exiting, error: {error}")
-        sys.exit(1)

docs/CONTRIBUTING.md

@@ -26,7 +26,7 @@ In addition to the pre-requisites listed in the [README](/README.md), the follow
 
 1. Clone this repository:
    ```
-   $ git clone https://github.com/cerc-io/stack-orchestrator.git
+   $ git clone https://git.vdb.to/cerc-io/stack-orchestrator.git
    ```
 
 2. Enter the project directory:

docs/README.md

@@ -0,0 +1,8 @@
+# Stack Orchestrator
+
+Here you will find information about the design of stack orchestrator, contributing to it, and deploying services/applications that combine two or more "stacks".
+
+Most "stacks" contain their own README which has plenty of information on deploying, but stacks can be combined in a variety of ways which are document here, for example:
+
+- [Gitea with Laconicd Fixturenet](./gitea-with-laconicd-fixturenet.md)
+- [Laconicd Registry with Console](./laconicd-with-console.md)

docs/adding-a-new-stack.md

@@ -0,0 +1,71 @@
+# Adding a new stack
+
+See [this PR](https://git.vdb.to/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://git.vdb.to/cerc-io/stack-orchestrator/pull/435) is another good example.
+
+For external developers, we recommend forking this repo and adding your stack directly to your fork. This initially requires running in "developer mode" as described [here](/docs/CONTRIBUTING.md). Check out the [Namada stack](https://github.com/vknowable/stack-orchestrator/blob/main/app/data/stacks/public-namada/digitalocean_quickstart.md) from Knowable to see how that is done.
+
+Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
+
+## Example
+
+- in `stack_orchestrator/data/stacks/my-new-stack/stack.yml` add:
+
+```yaml
+version: "0.1"
+name: my-new-stack
+repos:
+  - github.com/my-org/my-new-stack
+containers:
+  - cerc/my-new-stack
+pods:
+  - my-new-stack
+```
+
+- in `stack_orchestrator/data/container-build/cerc-my-new-stack/build.sh` add:
+
+```yaml
+#!/usr/bin/env bash
+# Build the my-new-stack image
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+docker build -t cerc/my-new-stack:local -f ${CERC_REPO_BASE_DIR}/my-new-stack/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/my-new-stack
+```
+
+- in `stack_orchestrator/data/compose/docker-compose-my-new-stack.yml` add:
+
+```yaml
+version: "3.2"
+
+services:
+  my-new-stack:
+    image: cerc/my-new-stack:local
+    restart: always
+    ports:
+      - "0.0.0.0:3000:3000"
+```
+
+- in `stack_orchestrator/data/repository-list.txt` add:
+
+```bash
+github.com/my-org/my-new-stack
+```
+whereby that repository contains your source code and a `Dockerfile`, and matches the `repos:` field in the `stack.yml`.
+
+- in `stack_orchestrator/data/container-image-list.txt` add:
+
+```bash
+cerc/my-new-stack
+```
+
+- in `stack_orchestrator/data/pod-list.txt` add:
+
+```bash
+my-new-stack
+```
+
+Now, the following commands will fetch, build, and deploy you app:
+
+```bash
+laconic-so --stack my-new-stack setup-repositories
+laconic-so --stack my-new-stack build-containers
+laconic-so --stack my-new-stack deploy-system up
+```

docs/cli.md

@@ -6,7 +6,7 @@ Sub-commands and flags
 
 Clone a single repository:
 ```
-$ laconic-so setup-repositories --include cerc-io/go-ethereum
+$ laconic-so setup-repositories --include github.com/cerc-io/go-ethereum
 ```
 Clone the repositories for a stack:
 ```

docs/gitea-with-laconicd-fixturenet.md

@@ -0,0 +1,80 @@
+# Gitea x NPMs X Laconicd
+
+Deploy a local Gitea server, publish NPM packages to it, then use those packages to build a Laconicd fixturenet. Demonstrates several components of the Laconic stack
+
+### Build and Deploy Gitea
+
+```bash
+laconic-so --stack build-support build-containers
+laconic-so --stack package-registry setup-repositories
+laconic-so --stack package-registry build-containers 
+laconic-so --stack package-registry deploy up
+```
+
+These commands can take awhile. Eventually, some instructions and a token will output. Set `CERC_NPM_AUTH_TOKEN`:
+
+```bash
+export CERC_NPM_AUTH_TOKEN=<your-token>
+```
+
+### Configure the hostname gitea.local
+
+How to do this depends on your operating system  but usually involves editing a `hosts` file. For example, on Linux add this line to the file `/etc/hosts` (needs sudo):
+
+```bash
+127.0.0.1       gitea.local
+```
+
+Test with:
+
+```bash
+ping gitea.local
+```
+
+```bash
+PING gitea.local (127.0.0.1) 56(84) bytes of data.
+64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.147 ms
+64 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.033 ms
+```
+
+Although not necessary in order to build and publish packages, you can now access the Gitea web interface at: [http://gitea.local:3000](http://gitea.local:3000) using these credentials: `gitea_admin/admin1234` (Note: please properly secure Gitea if public internet access is allowed).
+
+### Build npm Packages
+
+Clone the required repositories:
+
+```bash
+laconic-so --stack fixturenet-laconicd setup-repositories
+```
+
+Build and publish the npm packages:
+
+```bash
+laconic-so --stack fixturenet-laconicd build-npms
+```
+
+Navigate to the Gitea console and switch to the `cerc-io` user then find the `Packages` tab to confirm that these two npm packages have been published:
+
+- `@cerc-io/laconic-registry-cli`
+- `@cerc-io/laconic-sdk`
+
+### Build and deploy fixturenet containers
+
+```bash
+laconic-so --stack fixturenet-laconicd build-containers
+laconic-so --stack fixturenet-laconicd deploy up
+```
+
+Check the logs:
+
+```bash
+laconic-so --stack fixturenet-laconicd deploy logs
+```
+
+### Test with the registry CLI
+
+```bash
+laconic-so --stack fixturenet-laconicd deploy exec cli "laconic cns status"
+```
+
+Try additional CLI commands, documented [here](https://github.com/cerc-io/laconic-registry-cli#operations).

docs/laconicd-with-console.md

@@ -2,10 +2,10 @@
 
 The following tutorial explains the steps to run a laconicd fixturenet with CLI and web console that displays records in the registry. It is designed as an introduction to Stack Orchestrator and to showcase one component of the Laconic Stack. Prior to Stack Orchestrator, the following 4 repositories had to be cloned and setup manually:
 
-- https://github.com/cerc-io/laconicd
-- https://github.com/cerc-io/laconic-sdk
-- https://github.com/cerc-io/laconic-registry-cli
-- https://github.com/cerc-io/laconic-console
+- https://git.vdb.to/cerc-io/laconicd
+- https://git.vdb.to/cerc-io/laconic-sdk
+- https://git.vdb.to/cerc-io/laconic-registry-cli
+- https://git.vdb.to/cerc-io/laconic-console
 
 Now, with Stack Orchestrator, it is a few quick commands. Additionally, the `docker` and `docker compose` integration on the back-end allows the stack to easily persist, facilitating workflows.
 
@@ -23,7 +23,7 @@ ssh root@IP
 2. Get the install script, give it executable permissions, and run it:
 
 ```
-curl -o install.sh https://raw.githubusercontent.com/cerc-io/stack-orchestrator/main/scripts/quick-install-ubuntu.sh
+curl -o install.sh https://raw.githubusercontent.com/cerc-io/stack-orchestrator/main/scripts/quick-install-linux.sh
 ```
 ```
 chmod +x install.sh
@@ -52,7 +52,7 @@ laconic-so version
 1. Get the repositories
 
 ```
-laconic-so --stack fixturenet-laconic-loaded setup-repositories --include cerc-io/laconicd,cerc-io/laconic-sdk,cerc-io/laconic-registry-cli,cerc-io/laconic-console
+laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
 ```
 
 2. Set this environment variable to the Laconic self-hosted Gitea instance:
@@ -108,6 +108,37 @@ laconic-5cd0a80c1442c3044c8b295d26426bae-laconicd-1         | 9:30PM INF indexed
 laconic-so --stack fixturenet-laconic-loaded deploy exec cli "laconic cns status"
 ```
 
+```
+{
+  "version": "0.3.0",
+  "node": {
+    "id": "4216af2ac9f68bda33a38803fc1b5c9559312c1d",
+    "network": "laconic_9000-1",
+    "moniker": "localtestnet"
+  },
+  "sync": {
+    "latest_block_hash": "1BDF4CB9AE2390DA65BCF997C83133C18014FCDDCAE03708488F0B56FCEEA429",
+    "latest_block_height": "5",
+    "latest_block_time": "2023-08-09 16:00:30.386903172 +0000 UTC",
+    "catching_up": false
+  },
+  "validator": {
+    "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+    "voting_power": "1000000000000000"
+  },
+  "validators": [
+    {
+      "address": "651FBC700B747C76E90ACFC18CC9508C3D0905B9",
+      "voting_power": "1000000000000000",
+      "proposer_priority": "0"
+    }
+  ],
+  "num_peers": "0",
+  "peers": [],
+  "disk_usage": "292.0K"
+}
+```
+
 ## Configure Digital Ocean firewall
 
 Let's open some ports.
@@ -181,7 +212,7 @@ record:
 
 3. Try out additional CLI commands
 
-- these are documented [here](https://github.com/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
+- these are documented [here](https://git.vdb.to/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
 - e.g,:
 
 ```

docs/spec.md

@@ -1,7 +1,6 @@
 # Specification
 
-(note this page is out of date)
-
+Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315).
 
 ## Implementation
 

docs/webapp.md

@@ -0,0 +1,64 @@
+### Building and Running Webapps
+
+It is possible to build and run Next.js webapps using the `build-webapp` and `run-webapp` subcommands.
+
+To make it easier to build once and deploy into different environments and with different configuration,
+compilation and static page generation are separated in the `build-webapp` and `run-webapp` steps.
+
+This offers much more flexibilty than standard Next.js build methods, since any environment variables accessed
+via `process.env`, whether for pages or for API, will have values drawn from their runtime deployment environment,
+not their build environment. 
+
+## Building
+
+Building usually requires no additional configuration.  By default, the Next.js version specified in `package.json`
+is used, and either `yarn` or `npm` will be used automatically depending on which lock files are present.  These
+can be overidden with the build arguments `CERC_NEXT_VERSION` and `CERC_BUILD_TOOL` respectively.  For example: `--extra-build-args "--build-arg CERC_NEXT_VERSION=13.4.12"`
+
+**Example**:
+```
+$ cd ~/cerc
+$ git clone git@git.vdb.to:cerc-io/test-progressive-web-app.git
+$ laconic-so build-webapp --source-repo ~/cerc/test-progressive-web-app
+...
+
+Built host container for ~/cerc/test-progressive-web-app with tag:
+
+    cerc/test-progressive-web-app:local
+
+To test locally run:
+
+    laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment.env
+
+```
+
+## Running
+
+With `run-webapp` a new container will be launched on the local machine, with runtime configuration provided by `--env-file` (if specified) and published on an available port.  Multiple instances can be launched with different configuration.
+
+**Example**:
+```
+# Production env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/production.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 4c6e893bf436b3e91a2b92ce37e30e499685131705700bd92a90d2eb14eefd05
+URL: http://localhost:32768
+
+# Dev env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/dev.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 9ab96494f563aafb6c057d88df58f9eca81b90f8721a4e068493a289a976051c
+URL: http://localhost:32769
+```
+
+## Deploying
+
+Use the subcommand `deploy-webapp create` to make a deployment directory that can be subsequently deployed to a Kubernetes cluster.
+Example commands are shown below, assuming that the webapp container image `cerc/test-progressive-web-app:local` has already been built:
+```
+$ laconic-so deploy-webapp create --kube-config ~/kubectl/k8s-kubeconfig.yaml --image-registry registry.digitalocean.com/laconic-registry --deployment-dir webapp-k8s-deployment --image cerc/test-progressive-web-app:local --url https://test-pwa-app.hosting.laconic.com/ --env-file test-webapp.env
+$ laconic-so deployment --dir webapp-k8s-deployment push-images
+$ laconic-so deployment --dir webapp-k8s-deployment start
+```

requirements.txt

@@ -1,6 +1,13 @@
-python-decouple>=3.6
-GitPython>=3.1.27
-tqdm>=4.64.0
-python-on-whales>=0.58.0
-click>=8.1.3
-pyyaml>=6.0
+python-decouple>=3.8
+python-dotenv==1.0.0
+GitPython>=3.1.32
+tqdm>=4.65.0
+python-on-whales>=0.64.0
+click>=8.1.6
+PyYAML>=6.0.1
+ruamel.yaml>=0.17.32
+pydantic==1.10.9
+tomli==2.0.1
+validators==0.22.0
+kubernetes>=28.1.0
+humanfriendly>=10.0

scripts/cloud-init-dev-mode-install.yaml

@@ -0,0 +1,44 @@
+#cloud-config
+
+# Used for easily testing stacks-in-development on cloud platforms
+# Assumes Ubuntu, edit the last line if targeting a different OS
+
+# Once SSH'd into the server, run:
+# `$ cd stack-orchestrator`
+# `$ git checkout <branch>
+# `$ ./scripts/developer-mode-setup.sh`
+# `$ source ./venv/bin/activate`
+
+# Followed by the stack instructions.
+
+package_update: true
+package_upgrade: true
+
+groups:
+  - docker
+
+system_info:
+  default_user:
+    groups: [ docker ]
+
+packages:
+  - apt-transport-https
+  - ca-certificates
+  - curl
+  - jq
+  - git
+  - gnupg
+  - lsb-release
+  - unattended-upgrades
+  - python3.10-venv
+  - pip
+
+runcmd:
+  - mkdir -p /etc/apt/keyrings
+  - curl -fsSL https://download.docker.com/linux/ubuntu/gpg | gpg --dearmor -o /etc/apt/keyrings/docker.gpg
+  - echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | tee /etc/apt/sources.list.d/docker.list > /dev/null
+  - apt-get update
+  - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
+  - systemctl enable docker
+  - systemctl start docker
+  - git clone https://git.vdb.to/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator

scripts/cloud-init-user-mode-install.yaml

@@ -0,0 +1,35 @@
+#cloud-config
+
+# Used for installing Stack Orchestrator on platforms that support `cloud-init`
+# Tested on Ubuntu
+
+package_update: true
+package_upgrade: true
+
+groups:
+  - docker
+
+system_info:
+  default_user:
+    groups: [ docker ]
+
+packages:
+  - apt-transport-https
+  - ca-certificates
+  - curl
+  - jq
+  - git
+  - gnupg
+  - lsb-release
+  - unattended-upgrades
+
+runcmd:
+  - mkdir -p /etc/apt/keyrings
+  - curl -fsSL https://download.docker.com/linux/ubuntu/gpg | gpg --dearmor -o /etc/apt/keyrings/docker.gpg
+  - echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | tee /etc/apt/sources.list.d/docker.list > /dev/null
+  - apt-get update
+  - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
+  - systemctl enable docker
+  - systemctl start docker
+  - curl -L -o /usr/local/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
+  - chmod +x /usr/local/bin/laconic-so

scripts/create_build_tag_file.sh

@@ -1,6 +1,6 @@
-build_tag_file_name=./app/data/build_tag.txt
+build_tag_file_name=./stack_orchestrator/data/build_tag.txt
 echo "# This file should be re-generated running: scripts/create_build_tag_file.sh script" > $build_tag_file_name
-product_version_string=$( tail -1 ./app/data/version.txt )
+product_version_string=$( tail -1 ./stack_orchestrator/data/version.txt )
 commit_string=$( git rev-parse --short HEAD )
 timestamp_string=$(date +'%Y%m%d%H%M')
 build_tag_string=${product_version_string}-${commit_string}-${timestamp_string}

scripts/quick-deploy-test.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+# Beginnings of a script to quickly spin up and test a deployment
+if [[ -n "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+if [[ -n "$1" ]]; then
+	stack_name=$1
+else
+	stack_name="test"
+fi
+spec_file_name="${stack_name}-spec.yml"
+deployment_dir_name="${stack_name}-deployment"
+rm -f ${spec_file_name}
+rm -rf ${deployment_dir_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose init --output ${spec_file_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose create --deployment-dir ${deployment_dir_name} --spec-file ${spec_file_name}
+#laconic-so deployment --dir ${deployment_dir_name} start
+#laconic-so deployment --dir ${deployment_dir_name} ps
+#laconic-so deployment --dir ${deployment_dir_name} stop

scripts/quick-install-linux.sh

@@ -5,6 +5,9 @@ fi
 
 install_dir=~/bin
 
+# Skip the package install stuff if so directed
+if ! [[ -n "$CERC_SO_INSTALL_SKIP_PACKAGES" ]]; then
+
 # First display a reasonable warning to the user unless run with -y
 if ! [[ $# -eq 1 && $1 == "-y" ]]; then
   echo "**************************************************************************************"
@@ -28,12 +31,43 @@ fi
 #   Check python3 is available
 #   Check machine resources are sufficient
 
+# Determine if we are on Debian or Ubuntu
+linux_distro=$(lsb_release -a 2>/dev/null | grep "^Distributor ID:" | cut -f 2)
+# Some systems don't have lsb_release installed (e.g. ChromeOS) and so we try to
+# use /etc/os-release instead
+if [[ -z "$linux_distro" ]]; then
+  if [[ -f "/etc/os-release" ]]; then
+    distro_name_string=$(grep "^NAME=" /etc/os-release | cut -d '=' -f 2)
+    if [[ $distro_name_string =~ Debian ]]; then
+      linux_distro="Debian"
+    elif [[ $distro_name_string =~ Ubuntu ]]; then
+      linux_distro="Ubuntu"
+    fi
+  else
+    echo "Failed to identify distro: /etc/os-release doesn't exist"
+    exit 1
+  fi
+fi
+case $linux_distro in
+  Debian)
+    echo "Installing docker for Debian"
+    ;;
+  Ubuntu)
+    echo "Installing docker for Ubuntu"
+    ;;
+  *)
+    echo "ERROR: Detected unknown distribution $linux_distro, can't install docker"
+    exit 1
+    ;;
+esac
+
 # dismiss the popups
 export DEBIAN_FRONTEND=noninteractive
 
 ## https://docs.docker.com/engine/install/ubuntu/
+## https://docs.docker.com/engine/install/debian/
 ## https://superuser.com/questions/518859/ignore-packages-that-are-not-currently-installed-when-using-apt-get-remove1
-packages_to_remove="docker docker-engine docker.io containerd runc"
+packages_to_remove="docker docker-engine docker.io containerd runc docker-compose docker-doc podman-docker"
 installed_packages_to_remove=""
 for package_to_remove in $(echo $packages_to_remove); do
   $(dpkg --info $package_to_remove &> /dev/null)
@@ -65,10 +99,25 @@ sudo apt -y install curl
 sudo apt -y install ca-certificates gnupg
 
 # Add dockerco package repository
-sudo mkdir -m 0755 -p /etc/apt/keyrings
-curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
+# For reasons not obvious, the dockerco instructions for installation on
+# Debian and Ubuntu are slightly different here
+case $linux_distro in
+  Debian)
+    sudo install -m 0755 -d /etc/apt/keyrings
+    curl -fsSL https://download.docker.com/linux/debian/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
+    sudo chmod a+r /etc/apt/keyrings/docker.gpg
+    ;;
+  Ubuntu)
+    sudo mkdir -m 0755 -p /etc/apt/keyrings
+    curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
+    ;;
+  *)
+    echo "ERROR: Detected unknown distribution $linux_distro, can't install docker"
+    exit 1
+    ;;
+esac
 echo \
-  "deb [arch="$(dpkg --print-architecture)" signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu \
+  "deb [arch="$(dpkg --print-architecture)" signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/${linux_distro,,} \
   "$(. /etc/os-release && echo "$VERSION_CODENAME")" stable" | \
   sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
 
@@ -82,13 +131,20 @@ sudo apt -y install docker-ce docker-ce-cli containerd.io docker-buildx-plugin d
 # Allow the current user to use Docker
 sudo usermod -aG docker $USER
 
+# End of long if block: Skip the package install stuff if so directed
+fi
+
 echo "**************************************************************************************"
 echo "Installing laconic-so"
 # install latest `laconic-so`
+distribution_url=https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 install_filename=${install_dir}/laconic-so
 mkdir -p  ${install_dir}
-curl -L -o ${install_filename} https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+curl -L -o ${install_filename} ${distribution_url}
 chmod +x ${install_filename}
+# Set up config file for self-update feature
+mkdir ~/.laconic-so
+echo "distribution-url: ${distribution_url}" >  ~/.laconic-so/config.yml
 
 echo "**************************************************************************************"
 # Check if our PATH line is already there

setup.py

@@ -13,19 +13,18 @@ setup(
     description='Orchestrates deployment of the Laconic stack',
     long_description=long_description,
     long_description_content_type="text/markdown",
-    url='https://github.com/cerc-io/stack-orchestrator',
-    py_modules=['cli', 'app'],
+    url='https://git.vdb.to/cerc-io/stack-orchestrator',
+    py_modules=['stack_orchestrator'],
     packages=find_packages(),
     install_requires=[requirements],
     python_requires='>=3.7',
     include_package_data=True,
-    # See: https://github.com/pypa/setuptools/issues/1806
-    package_data={'': ['data/*', 'data/*/*', 'data/*/*/*', 'data/*/*/*/*', 'data/*/*/*/*/*']},
+    package_data={'': ['data/**']},
     classifiers=[
         "Programming Language :: Python :: 3.8",
         "Operating System :: OS Independent",
     ],
     entry_points={
-        'console_scripts': ['laconic-so=cli:cli'],
+        'console_scripts': ['laconic-so=stack_orchestrator.main:cli'],
     }
 )

stack_orchestrator/base.py

@@ -1,4 +1,4 @@
-# Copyright © 2022, 2023 Cerc
+# Copyright © 2022, 2023 Vulcanize
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License as published by
@@ -15,7 +15,8 @@
 
 import os
 from abc import ABC, abstractmethod
-from .deploy_system import get_stack_status
+from stack_orchestrator.deploy.deploy import get_stack_status
+from decouple import config
 
 
 def get_stack(config, stack):
@@ -62,10 +63,20 @@ class package_registry_stack(base_stack):
                 self.url = "http://gitea.local:3000/api/packages/cerc-io/npm/"
             else:
                 # If not, print a message about how to start it and return fail to the caller
-                print("ERROR: The package-registry stack is not running, and no external registry specified with CERC_NPM_REGISTRY_URL")
+                print("ERROR: The package-registry stack is not running, and no external registry "
+                      "specified with CERC_NPM_REGISTRY_URL")
                 print("ERROR: Start the local package registry with: laconic-so --stack package-registry deploy-system up")
                 return False
         return True
 
     def get_url(self):
         return self.url
+
+
+def get_npm_registry_url():
+    # If an auth token is not defined, we assume the default should be the cerc registry
+    # If an auth token is defined, we assume the local gitea should be used.
+    default_npm_registry_url = "http://gitea.local:3000/api/packages/cerc-io/npm/" if config(
+        "CERC_NPM_AUTH_TOKEN", default=None
+        ) else "https://git.vdb.to/api/packages/cerc-io/npm/"
+    return config("CERC_NPM_REGISTRY_URL", default=default_npm_registry_url)

stack_orchestrator/build/build_containers.py

@@ -0,0 +1,190 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds or pulls containers for the system components
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+import sys
+from decouple import config
+import subprocess
+import click
+import importlib.resources
+from pathlib import Path
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config, stack_is_external, warn_exit
+from stack_orchestrator.base import get_npm_registry_url
+
+# TODO: find a place for this
+#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
+
+
+def make_container_build_env(dev_root_path: str,
+                             container_build_dir: str,
+                             debug: bool,
+                             force_rebuild: bool,
+                             extra_build_args: str):
+    container_build_env = {
+        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
+        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
+        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
+        "CERC_REPO_BASE_DIR": dev_root_path,
+        "CERC_CONTAINER_BASE_DIR": container_build_dir,
+        "CERC_HOST_UID": f"{os.getuid()}",
+        "CERC_HOST_GID": f"{os.getgid()}",
+        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
+    }
+    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
+    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
+    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
+    docker_host_env = os.getenv("DOCKER_HOST")
+    if docker_host_env:
+        container_build_env.update({"DOCKER_HOST": docker_host_env})
+
+    return container_build_env
+
+
+def process_container(stack: str,
+                      container,
+                      container_build_dir: str,
+                      container_build_env: dict,
+                      dev_root_path: str,
+                      quiet: bool,
+                      verbose: bool,
+                      dry_run: bool,
+                      continue_on_error: bool,
+                      ):
+    if not quiet:
+        print(f"Building: {container}")
+
+    default_container_tag = f"{container}:local"
+    container_build_env.update({"CERC_DEFAULT_CONTAINER_IMAGE_TAG": default_container_tag})
+
+    # Check if this is in an external stack
+    if stack_is_external(stack):
+        container_parent_dir = Path(stack).joinpath("container-build")
+        temp_build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+        temp_build_script_filename = temp_build_dir.joinpath("build.sh")
+        # Now check if the container exists in the external stack.
+        if not temp_build_script_filename.exists():
+            # If not, revert to building an internal container
+            container_parent_dir = container_build_dir
+    else:
+        container_parent_dir = container_build_dir
+
+    build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+    build_script_filename = build_dir.joinpath("build.sh")
+
+    if verbose:
+        print(f"Build script filename: {build_script_filename}")
+    if os.path.exists(build_script_filename):
+        build_command = build_script_filename.as_posix()
+    else:
+        if verbose:
+            print(f"No script file found: {build_script_filename}, using default build script")
+        repo_dir = container.split('/')[1]
+        # TODO: make this less of a hack -- should be specified in some metadata somewhere
+        # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
+        repo_full_path = os.path.join(dev_root_path, repo_dir)
+        repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
+        build_command = os.path.join(container_build_dir,
+                                     "default-build.sh") + f" {default_container_tag} {repo_dir_or_build_dir}"
+    if not dry_run:
+        # No PATH at all causes failures with podman.
+        if "PATH" not in container_build_env:
+            container_build_env["PATH"] = os.environ["PATH"]
+        if verbose:
+            print(f"Executing: {build_command} with environment: {container_build_env}")
+        build_result = subprocess.run(build_command, shell=True, env=container_build_env)
+        if verbose:
+            print(f"Return code is: {build_result.returncode}")
+        if build_result.returncode != 0:
+            print(f"Error running build for {container}")
+            if not continue_on_error:
+                print("FATAL Error: container build failed and --continue-on-error not set, exiting")
+                sys.exit(1)
+            else:
+                print("****** Container Build Error, continuing because --continue-on-error is set")
+    else:
+        print("Skipped")
+
+
+@click.command()
+@click.option('--include', help="only build these containers")
+@click.option('--exclude', help="don\'t build these containers")
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.pass_context
+def command(ctx, include, exclude, force_rebuild, extra_build_args):
+    '''build the set of containers required for a complete stack'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not os.path.isdir(dev_root_path):
+        print('Dev root directory doesn\'t exist, creating')
+
+    # See: https://stackoverflow.com/a/20885799/1701505
+    from stack_orchestrator import data
+    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
+        all_containers = container_list_file.read().splitlines()
+
+    containers_in_scope = []
+    if stack:
+        stack_config = get_parsed_stack_config(stack)
+        if "containers" not in stack_config or stack_config["containers"] is None:
+            warn_exit(f"stack {stack} does not define any containers")
+        containers_in_scope = stack_config['containers']
+    else:
+        containers_in_scope = all_containers
+
+    if verbose:
+        print(f'Containers: {containers_in_scope}')
+        if stack:
+            print(f"Stack: {stack}")
+
+    container_build_env = make_container_build_env(dev_root_path,
+                                                   container_build_dir,
+                                                   debug,
+                                                   force_rebuild,
+                                                   extra_build_args)
+
+    for container in containers_in_scope:
+        if include_exclude_check(container, include, exclude):
+            process_container(stack, container, container_build_dir, container_build_env,
+                              dev_root_path, quiet, verbose, dry_run, continue_on_error)
+        else:
+            if verbose:
+                print(f"Excluding: {container}")

stack_orchestrator/build/build_npms.py

@@ -1,4 +1,4 @@
-# Copyright © 2022, 2023 Cerc
+# Copyright © 2022, 2023 Vulcanize
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License as published by
@@ -25,15 +25,17 @@ from decouple import config
 import click
 import importlib.resources
 from python_on_whales import docker, DockerException
-from .base import get_stack
-from .util import include_exclude_check, get_parsed_stack_config
+from stack_orchestrator.base import get_stack
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config
 
 builder_js_image_name = "cerc/builder-js:local"
 
+
 @click.command()
 @click.option('--include', help="only build these packages")
 @click.option('--exclude', help="don\'t build these packages")
-@click.option("--force-rebuild", is_flag=True, default=False, help="Override existing target package version check -- force rebuild")
+@click.option("--force-rebuild", is_flag=True, default=False,
+              help="Override existing target package version check -- force rebuild")
 @click.option("--extra-build-args", help="Supply extra arguments to build")
 @click.pass_context
 def command(ctx, include, exclude, force_rebuild, extra_build_args):
@@ -81,7 +83,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
         os.makedirs(build_root_path)
 
     # See: https://stackoverflow.com/a/20885799/1701505
-    from . import data
+    from stack_orchestrator import data
     with importlib.resources.open_text(data, "npm-package-list.txt") as package_list_file:
         all_packages = package_list_file.read().splitlines()
 
@@ -122,7 +124,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
             # envs = {"CERC_NPM_AUTH_TOKEN": npm_registry_url_token} | ({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
             # but that isn't available in Python 3.8 (default in Ubuntu 20) so for now we use dict.update:
             envs = {"CERC_NPM_AUTH_TOKEN": npm_registry_url_token,
-                    "LACONIC_HOSTED_CONFIG_FILE": "config-hosted.yml" # Convention used by our web app packages
+                    "LACONIC_HOSTED_CONFIG_FILE": "config-hosted.yml"  # Convention used by our web app packages
                     }
             envs.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
             envs.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})

stack_orchestrator/build/build_webapp.py

@@ -0,0 +1,84 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds webapp containers
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+from decouple import config
+import click
+from pathlib import Path
+from stack_orchestrator.build import build_containers
+from stack_orchestrator.deploy.webapp.util import determine_base_container
+
+
+@click.command()
+@click.option('--base-container')
+@click.option('--source-repo', help="directory containing the webapp to build", required=True)
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.option("--tag", help="Container tag (default: cerc/<app_name>:local)")
+@click.pass_context
+def command(ctx, base_container, source_repo, force_rebuild, extra_build_args, tag):
+    '''build the specified webapp container'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not base_container:
+        base_container = determine_base_container(source_repo)
+
+    # First build the base container.
+    container_build_env = build_containers.make_container_build_env(dev_root_path, container_build_dir, debug,
+                                                                    force_rebuild, extra_build_args)
+
+    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)
+
+    # Now build the target webapp.  We use the same build script, but with a different Dockerfile and work dir.
+    container_build_env["CERC_WEBAPP_BUILD_RUNNING"] = "true"
+    container_build_env["CERC_CONTAINER_BUILD_WORK_DIR"] = os.path.abspath(source_repo)
+    container_build_env["CERC_CONTAINER_BUILD_DOCKERFILE"] = os.path.join(container_build_dir,
+                                                                          base_container.replace("/", "-"),
+                                                                          "Dockerfile.webapp")
+    if not tag:
+        webapp_name = os.path.abspath(source_repo).split(os.path.sep)[-1]
+        container_build_env["CERC_CONTAINER_BUILD_TAG"] = f"cerc/{webapp_name}:local"
+    else:
+        container_build_env["CERC_CONTAINER_BUILD_TAG"] = tag
+
+    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)

stack_orchestrator/command_types.py

@@ -0,0 +1,27 @@
+# Copyright © 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+from dataclasses import dataclass
+
+
+@dataclass
+class CommandOptions:
+    stack: str
+    quiet: bool = False
+    verbose: bool = False
+    dry_run: bool = False
+    local_stack: bool = False
+    debug: bool = False
+    continue_on_error: bool = False

stack_orchestrator/constants.py

@@ -0,0 +1,38 @@
+# Copyright © 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+cluster_name_prefix = "laconic-"
+stack_file_name = "stack.yml"
+spec_file_name = "spec.yml"
+config_file_name = "config.env"
+deployment_file_name = "deployment.yml"
+compose_dir_name = "compose"
+compose_deploy_type = "compose"
+k8s_kind_deploy_type = "k8s-kind"
+k8s_deploy_type = "k8s"
+cluster_id_key = "cluster-id"
+kube_config_key = "kube-config"
+deploy_to_key = "deploy-to"
+network_key = "network"
+http_proxy_key = "http-proxy"
+image_registry_key = "image-registry"
+configmaps_key = "configmaps"
+resources_key = "resources"
+volumes_key = "volumes"
+security_key = "security"
+annotations_key = "annotations"
+labels_key = "labels"
+kind_config_filename = "kind-config.yml"
+kube_config_filename = "kubeconfig.yml"

stack_orchestrator/data/compose/docker-compose-container-registry.yml

@@ -0,0 +1,13 @@
+services:
+  registry:
+    image: registry:2.8
+    restart: always
+    environment:
+      REGISTRY_LOG_LEVEL: ${REGISTRY_LOG_LEVEL}
+    volumes:
+      - registry-data:/var/lib/registry
+    ports:
+      - "5000"
+
+volumes:
+  registry-data:

stack_orchestrator/data/compose/docker-compose-contract-sushiswap.yml

@@ -0,0 +1,49 @@
+version: '3.2'
+
+services:
+  # Deploys the core (UniswapV3Factory) contract
+  sushiswap-v3-core:
+    image: cerc/sushiswap-v3-core:local
+    restart: on-failure
+    env_file:
+      # Defaults
+      - ../config/contract-sushiswap/deployment-params.env
+    environment:
+      # Overrides
+      CERC_ETH_RPC_ENDPOINT: ${ETH_RPC_ENDPOINT}
+      CERC_CHAIN_ID: ${CHAIN_ID}
+      CERC_ACCOUNT_PRIVATE_KEY: ${ACCOUNT_PRIVATE_KEY}
+      CERC_DEPLOY: ${DEPLOY}
+    volumes:
+      - ../config/network/wait-for-it.sh:/app/wait-for-it.sh
+      - ../config/contract-sushiswap/deploy-core-contracts.sh:/app/deploy-core-contracts.sh
+      - sushiswap_core_deployment:/app/deployments/docker
+    command: ["bash", "-c", "/app/deploy-core-contracts.sh && tail -f"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  # Deploys the periphery (NFPM, token, etc.) contracts
+  sushiswap-v3-periphery:
+    image: cerc/sushiswap-v3-periphery:local
+    restart: on-failure
+    env_file:
+      # Defaults
+      - ../config/contract-sushiswap/deployment-params.env
+    environment:
+      # Overrides
+      CERC_ETH_RPC_ENDPOINT: ${ETH_RPC_ENDPOINT}
+      CERC_CHAIN_ID: ${CHAIN_ID}
+      CERC_ACCOUNT_PRIVATE_KEY: ${ACCOUNT_PRIVATE_KEY}
+      CERC_DEPLOY: ${DEPLOY}
+    volumes:
+      - ../config/network/wait-for-it.sh:/app/wait-for-it.sh
+      - ../config/contract-sushiswap/deploy-periphery-contracts.sh:/app/deploy-periphery-contracts.sh
+      - sushiswap_core_deployment:/app/core-deployments/docker
+      - sushiswap_periphery_deployment:/app/deployments/docker
+    command: ["bash", "-c", "/app/deploy-periphery-contracts.sh && tail -f"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  sushiswap_core_deployment:
+  sushiswap_periphery_deployment: