huh

.gitea/workflows/fixturenet-eth-plugeth-test.yml

@@ -2,12 +2,7 @@ name: Fixturenet-Eth-Plugeth-Test
 
 on:
   push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'
-  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
-    - cron: '2 14 * * *'
+    branches: 'ci-test'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -21,16 +16,8 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
-        uses: actions/setup-python@v4
+      - name: "Install Python"
+        uses: cerc-io/setup-python@v4
         with:
           python-version: '3.8'
       - name: "Print Python version"

.gitea/workflows/fixturenet-eth-test.yml

@@ -2,10 +2,7 @@ name: Fixturenet-Eth-Test
 
 on:
   push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.gitea/workflows/triggers/fixturenet-eth-test'
+    branches: 'ci-test'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,15 +16,7 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+      - name: "Install Python"
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'

.gitea/workflows/fixturenet-laconicd-test.yml

@@ -1,48 +0,0 @@
-name: Fixturenet-Laconicd-Test
-
-on:
-  push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.gitea/workflows/triggers/fixturenet-laconicd-test'
-  schedule:
-    - cron: '1 13 * * *'
-
-jobs:
-  test:
-    name: "Run an Laconicd fixturenet test"
-    runs-on: ubuntu-latest
-    steps:
-      - name: 'Update'
-        run: apt-get update
-      - name: 'Setup jq'
-        run: apt-get install jq -y
-      - name: 'Check jq'
-        run: |
-          which jq
-          jq --version
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Run fixturenet-laconicd tests"
-        run: ./tests/fixturenet-laconicd/run-test.sh

.gitea/workflows/lint.yml

@@ -1,21 +0,0 @@
-name: Lint Checks
-
-on:
-  pull_request:
-    branches: '*'
-  push:
-    branches: '*'
-
-jobs:
-  test:
-    name: "Run linter"
-    runs-on: ubuntu-latest
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name : "Run flake8"
-        uses: py-actions/flake8@v2

.gitea/workflows/publish.yml

@@ -5,8 +5,6 @@ on:
     branches:
       - main
       - publish-test
-    paths-ignore:
-      - '.gitea/workflows/triggers/*'
 
 jobs:
   publish:
@@ -20,15 +18,7 @@ jobs:
         run: |
           build_tag=$(./scripts/create_build_tag_file.sh)
           echo "build-tag=v${build_tag}" >> $GITHUB_OUTPUT
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+      - name: "Install Python"
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'

.gitea/workflows/test-container-registry.yml

@@ -1,54 +0,0 @@
-name: Container Registry Test
-
-on:
-  push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.gitea/workflows/triggers/test-container-registry'
-      - '.gitea/workflows/test-container-registry.yml'
-      - 'tests/container-registry/run-test.sh'
-  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
-    - cron: '6 19 * * *'
-
-jobs:
-  test:
-    name: "Run contaier registry hosting test on kind/k8s"
-    runs-on: ubuntu-22.04
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Check cgroups version"
-        run: mount | grep cgroup
-      - name: "Install kind"
-        run: ./tests/scripts/install-kind.sh
-      - name: "Install Kubectl"
-        run: ./tests/scripts/install-kubectl.sh
-      - name: "Install ed" # Only needed until we remove the need to edit the spec file
-        run: apt update && apt install -y ed
-      - name: "Run container registry deployment test"
-        run: |
-          source /opt/bash-utils/cgroup-helper.sh
-          join_cgroup
-          ./tests/container-registry/run-test.sh
-

.gitea/workflows/test-database.yml

@@ -1,52 +0,0 @@
-name: Database Test
-
-on:
-  push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.gitea/workflows/triggers/test-database'
-      - '.gitea/workflows/test-database.yml'
-      - 'tests/database/run-test.sh'
-  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
-    - cron: '5 18 * * *'
-
-jobs:
-  test:
-    name: "Run database hosting test on kind/k8s"
-    runs-on: ubuntu-22.04
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Check cgroups version"
-        run: mount | grep cgroup
-      - name: "Install kind"
-        run: ./tests/scripts/install-kind.sh
-      - name: "Install Kubectl"
-        run: ./tests/scripts/install-kubectl.sh
-      - name: "Run database deployment test"
-        run: |
-          source /opt/bash-utils/cgroup-helper.sh
-          join_cgroup
-          ./tests/database/run-test.sh
-

.gitea/workflows/test-deploy.yml

@@ -7,8 +7,6 @@ on:
     branches:
       - main
       - ci-test
-    paths-ignore:
-      - '.gitea/workflows/triggers/*'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -21,15 +19,7 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+      - name: "Install Python"
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'

.gitea/workflows/test-k8s-deploy.yml

@@ -1,54 +0,0 @@
-name: K8s Deploy Test
-
-on:
-  pull_request:
-    branches: '*'
-  push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.gitea/workflows/triggers/test-k8s-deploy'
-      - '.gitea/workflows/test-k8s-deploy.yml'
-      - 'tests/k8s-deploy/run-deploy-test.sh'
-  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
-    - cron: '3 15 * * *'
-
-jobs:
-  test:
-    name: "Run deploy test suite on kind/k8s"
-    runs-on: ubuntu-22.04
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Check cgroups version"
-        run: mount | grep cgroup
-      - name: "Install kind"
-        run: ./tests/scripts/install-kind.sh
-      - name: "Install Kubectl"
-        run: ./tests/scripts/install-kubectl.sh
-      - name: "Run k8s deployment test"
-        run: |
-          source /opt/bash-utils/cgroup-helper.sh
-          join_cgroup
-          ./tests/k8s-deploy/run-deploy-test.sh
-

.gitea/workflows/test-webapp.yml

@@ -1,51 +0,0 @@
-name: Webapp Test
-
-on:
-  pull_request:
-    branches: '*'
-  push:
-    branches:
-      - main
-      - ci-test
-    paths-ignore:
-      - '.gitea/workflows/triggers/*'
-
-# Needed until we can incorporate docker startup into the executor container
-env:
-  DOCKER_HOST: unix:///var/run/dind.sock
-
-jobs:
-  test:
-    name: "Run webapp test suite"
-    runs-on: ubuntu-latest
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Install wget" # 20240109 - Only needed until the executors are updated.
-        run: apt update && apt install -y wget
-      - name: Start dockerd # Also needed until we can incorporate into the executor
-        run: |
-          dockerd -H $DOCKER_HOST --userland-proxy=false &
-          sleep 5
-      - name: "Run webapp tests"
-        run: ./tests/webapp-test/run-webapp-test.sh

.gitea/workflows/test.yml

@@ -7,8 +7,6 @@ on:
     branches:
       - main
       - ci-test
-    paths-ignore:
-      - '.gitea/workflows/triggers/*'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -21,15 +19,7 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      # At present the stock setup-python action fails on Linux/aarch64
-      # Conditional steps below workaroud this by using deadsnakes for that case only
-      - name: "Install Python for ARM on Linux"
-        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
-        uses: deadsnakes/action@v3.0.1
-        with:
-          python-version: '3.8'
-      - name: "Install Python cases other than ARM on Linux"
-        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+      - name: "Install Python"
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'
@@ -48,4 +38,3 @@ jobs:
       - name: "Run smoke tests"
         run: ./tests/smoke-test/run-smoke-test.sh
 
-

.gitea/workflows/triggers/fixturenet-eth-plugeth-test

@@ -1,3 +0,0 @@
-Change this file to trigger running the fixturenet-eth-plugeth-test CI job
-trigger
-trigger

.gitea/workflows/triggers/fixturenet-eth-test

@@ -1,2 +0,0 @@
-Change this file to trigger running the fixturenet-eth-test CI job
-

.gitea/workflows/triggers/fixturenet-laconicd-test

@@ -1,3 +0,0 @@
-Change this file to trigger running the fixturenet-laconicd-test CI job
-Trigger
-Trigger

.gitea/workflows/triggers/test-container-registry

@@ -1 +0,0 @@
-Change this file to trigger running the test-container-registry CI job

.gitea/workflows/triggers/test-database

@@ -1,2 +0,0 @@
-Change this file to trigger running the test-database CI job
-Trigger test run

.gitea/workflows/triggers/test-k8s-deploy

@@ -1,2 +0,0 @@
-Change this file to trigger running the test-k8s-deploy CI job
-Trigger test on PR branch

.github/workflows/fixturenet-eth.yml

@@ -1,30 +0,0 @@
-name: Fixturenet-Eth Test
-
-on:
-  push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.github/workflows/triggers/fixturenet-eth-test'
-
-jobs:
-  test:
-    name: "Run fixturenet-eth test suite"
-    runs-on: ubuntu-latest
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Run fixturenet-eth tests"
-        run: ./tests/fixturenet-eth/run-test.sh

.github/workflows/fixturenet-laconicd.yml

@@ -1,30 +0,0 @@
-name: Fixturenet-Laconicd Test
-
-on:
-  push:
-    branches: '*'
-    paths:
-      - '!**'
-      - '.github/workflows/triggers/fixturenet-laconicd-test'
-
-jobs:
-  test:
-    name: "Run fixturenet-laconicd test suite"
-    runs-on: ubuntu-latest
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Run fixturenet-laconicd tests"
-        run: ./tests/fixturenet-laconicd/run-test.sh

.github/workflows/test-webapp.yml

@@ -1,29 +0,0 @@
-name: Webapp Test
-
-on:
-  pull_request:
-    branches: '*'
-  push:
-    branches: '*'
-
-jobs:
-  test:
-    name: "Run webapp test suite"
-    runs-on: ubuntu-latest
-    steps:
-      - name: "Clone project repository"
-        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.8'
-      - name: "Print Python version"
-        run: python3 --version
-      - name: "Install shiv"
-        run: pip install shiv
-      - name: "Generate build version file"
-        run: ./scripts/create_build_tag_file.sh
-      - name: "Build local shiv package"
-        run: ./scripts/build_shiv_package.sh
-      - name: "Run webapp tests"
-        run: ./tests/webapp-test/run-webapp-test.sh

.github/workflows/triggers/fixturenet-eth-test

@@ -1,2 +0,0 @@
-Change this file to trigger running the fixturenet-eth-test CI job
-

.github/workflows/triggers/fixturenet-laconicd-test

@@ -1,3 +0,0 @@
-Change this file to trigger running the fixturenet-laconicd-test CI job
-
-trigger

.gitignore

@@ -6,5 +6,5 @@ laconic_stack_orchestrator.egg-info
 __pycache__
 *~
 package
-stack_orchestrator/data/build_tag.txt
-/build
+app/data/build_tag.txt
+build

README.md

@@ -16,7 +16,6 @@ Ensure that the following are already installed:
 - [Python3](https://wiki.python.org/moin/BeginnersGuide/Download): `python3 --version` >= `3.8.10` (the Python3 shipped in Ubuntu 20+ is good to go)
 - [Docker](https://docs.docker.com/get-docker/): `docker --version` >= `20.10.21`
 - [jq](https://stedolan.github.io/jq/download/): `jq --version` >= `1.5`
-- [git](https://git-scm.com/book/en/v2/Getting-Started-Installing-Git): `git --version` >= `2.10.3`
 
 Note: if installing docker-compose via package manager on Linux (as opposed to Docker Desktop), you must [install the plugin](https://docs.docker.com/compose/install/linux/#install-the-plugin-manually), e.g. :
 
@@ -29,10 +28,10 @@ chmod +x ~/.docker/cli-plugins/docker-compose
 Next decide on a directory where you would like to put the stack-orchestrator program. Typically this would be 
 a "user" binary directory such as `~/bin` or perhaps `/usr/local/laconic` or possibly just the current working directory.
 
-Now, having selected that directory, download the latest release from [this page](https://git.vdb.to/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
+Now, having selected that directory, download the latest release from [this page](https://github.com/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
 
 ```bash
-curl -L -o ~/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
+curl -L -o ~/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
 ```
 
 Give it execute permissions:
@@ -49,27 +48,15 @@ Verify operation (your version will probably be different, just check here that
 laconic-so version
 Version: 1.1.0-7a607c2-202304260513
 ```
-Save the distribution url to `~/.laconic-so/config.yml`:
-```bash
-mkdir ~/.laconic-so
-echo "distribution-url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so" >  ~/.laconic-so/config.yml
-```
-
-### Update
-If Stack Orchestrator was installed using the process described above, it is able to subsequently self-update to the current latest version by running:
-
-```bash
-laconic-so update
-```
 
 ## Usage
 
-The various [stacks](/stack_orchestrator/data/stacks) each contain instructions for running different stacks based on your use case. For example:
+The various [stacks](/app/data/stacks) each contain instructions for running different stacks based on your use case. For example:
 
-- [self-hosted Gitea](/stack_orchestrator/data/stacks/build-support)
-- [an Optimism Fixturenet](/stack_orchestrator/data/stacks/fixturenet-optimism)
-- [laconicd with console and CLI](stack_orchestrator/data/stacks/fixturenet-laconic-loaded)
-- [kubo (IPFS)](stack_orchestrator/data/stacks/kubo)
+- [self-hosted Gitea](/app/data/stacks/build-support)
+- [an Optimism Fixturenet](/app/data/stacks/fixturenet-optimism)
+- [laconicd with console and CLI](app/data/stacks/fixturenet-laconic-loaded)
+- [kubo (IPFS)](app/data/stacks/kubo)
 
 ## Contributing
 

app/base.py

@@ -15,7 +15,7 @@
 
 import os
 from abc import ABC, abstractmethod
-from stack_orchestrator.deploy.deploy import get_stack_status
+from app.deploy import get_stack_status
 from decouple import config
 
 

app/build_containers.py

@@ -0,0 +1,143 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds or pulls containers for the system components
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+import sys
+from decouple import config
+import subprocess
+import click
+import importlib.resources
+from pathlib import Path
+from app.util import include_exclude_check, get_parsed_stack_config
+from app.base import get_npm_registry_url
+
+# TODO: find a place for this
+#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
+
+
+@click.command()
+@click.option('--include', help="only build these containers")
+@click.option('--exclude', help="don\'t build these containers")
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.pass_context
+def command(ctx, include, exclude, force_rebuild, extra_build_args):
+    '''build the set of containers required for a complete stack'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not os.path.isdir(dev_root_path):
+        print('Dev root directory doesn\'t exist, creating')
+
+    # See: https://stackoverflow.com/a/20885799/1701505
+    from app import data
+    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
+        all_containers = container_list_file.read().splitlines()
+
+    containers_in_scope = []
+    if stack:
+        stack_config = get_parsed_stack_config(stack)
+        containers_in_scope = stack_config['containers']
+    else:
+        containers_in_scope = all_containers
+
+    if verbose:
+        print(f'Containers: {containers_in_scope}')
+        if stack:
+            print(f"Stack: {stack}")
+
+    # TODO: make this configurable
+    container_build_env = {
+        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
+        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
+        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
+        "CERC_REPO_BASE_DIR": dev_root_path,
+        "CERC_CONTAINER_BASE_DIR": container_build_dir,
+        "CERC_HOST_UID": f"{os.getuid()}",
+        "CERC_HOST_GID": f"{os.getgid()}",
+        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
+    }
+    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
+    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
+    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
+    docker_host_env = os.getenv("DOCKER_HOST")
+    if docker_host_env:
+        container_build_env.update({"DOCKER_HOST": docker_host_env})
+
+    def process_container(container):
+        if not quiet:
+            print(f"Building: {container}")
+        build_dir = os.path.join(container_build_dir, container.replace("/", "-"))
+        build_script_filename = os.path.join(build_dir, "build.sh")
+        if verbose:
+            print(f"Build script filename: {build_script_filename}")
+        if os.path.exists(build_script_filename):
+            build_command = build_script_filename
+        else:
+            if verbose:
+                print(f"No script file found: {build_script_filename}, using default build script")
+            repo_dir = container.split('/')[1]
+            # TODO: make this less of a hack -- should be specified in some metadata somewhere
+            # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
+            repo_full_path = os.path.join(dev_root_path, repo_dir)
+            repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
+            build_command = os.path.join(container_build_dir, "default-build.sh") + f" {container}:local {repo_dir_or_build_dir}"
+        if not dry_run:
+            if verbose:
+                print(f"Executing: {build_command} with environment: {container_build_env}")
+            build_result = subprocess.run(build_command, shell=True, env=container_build_env)
+            if verbose:
+                print(f"Return code is: {build_result.returncode}")
+            if build_result.returncode != 0:
+                print(f"Error running build for {container}")
+                if not continue_on_error:
+                    print("FATAL Error: container build failed and --continue-on-error not set, exiting")
+                    sys.exit(1)
+                else:
+                    print("****** Container Build Error, continuing because --continue-on-error is set")
+        else:
+            print("Skipped")
+
+    for container in containers_in_scope:
+        if include_exclude_check(container, include, exclude):
+            process_container(container)
+        else:
+            if verbose:
+                print(f"Excluding: {container}")

app/build_npms.py

@@ -25,8 +25,8 @@ from decouple import config
 import click
 import importlib.resources
 from python_on_whales import docker, DockerException
-from stack_orchestrator.base import get_stack
-from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config
+from app.base import get_stack
+from app.util import include_exclude_check, get_parsed_stack_config
 
 builder_js_image_name = "cerc/builder-js:local"
 
@@ -83,7 +83,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
         os.makedirs(build_root_path)
 
     # See: https://stackoverflow.com/a/20885799/1701505
-    from stack_orchestrator import data
+    from app import data
     with importlib.resources.open_text(data, "npm-package-list.txt") as package_list_file:
         all_packages = package_list_file.read().splitlines()
 

app/data/compose/docker-compose-fixturenet-eth.yml

@@ -40,7 +40,6 @@ services:
       - fixturenet-eth-bootnode-geth
     ports:
       - "8545"
-      - "8546"
       - "40000"
       - "6060"
 
@@ -62,9 +61,6 @@ services:
       - fixturenet-eth-bootnode-geth
     volumes:
       - fixturenet_eth_geth_2_data:/root/ethdata
-    ports:
-      - "8545"
-      - "8546"
 
   fixturenet-eth-bootnode-lighthouse:
     restart: always

app/data/compose/docker-compose-fixturenet-laconic-console.yml

@@ -4,6 +4,6 @@ services:
     image: cerc/laconic-console-host:local
     environment:
       - CERC_WEBAPP_FILES_DIR=${CERC_WEBAPP_FILES_DIR:-/usr/local/share/.config/yarn/global/node_modules/@cerc-io/console-app/dist/production}
-      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost:9473}
+      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost}
     ports:
       - "80"

app/data/compose/docker-compose-fixturenet-laconicd.yml

@@ -5,7 +5,7 @@ services:
     command: ["sh", "/docker-entrypoint-scripts.d/create-fixturenet.sh"]
     volumes:
       # The cosmos-sdk node's database directory:
-      - laconicd-data:/root/.laconicd
+      - laconicd-data:/root/.laconicd/data
       # TODO: look at folding these scripts into the container
       - ../config/fixturenet-laconicd/create-fixturenet.sh:/docker-entrypoint-scripts.d/create-fixturenet.sh
       - ../config/fixturenet-laconicd/export-mykey.sh:/docker-entrypoint-scripts.d/export-mykey.sh

app/data/compose/docker-compose-fixturenet-optimism.yml

@@ -6,8 +6,8 @@ services:
   # Deploys the L1 smart contracts (outputs to volume l1_deployment)
   fixturenet-optimism-contracts:
     restart: on-failure
-    image: cerc/optimism-contracts:local
     hostname: fixturenet-optimism-contracts
+    image: cerc/optimism-contracts:local
     env_file:
       - ../config/fixturenet-optimism/l1-params.env
     environment:
@@ -17,49 +17,27 @@ services:
       CERC_L1_ACCOUNTS_CSV_URL: ${CERC_L1_ACCOUNTS_CSV_URL}
       CERC_L1_ADDRESS: ${CERC_L1_ADDRESS}
       CERC_L1_PRIV_KEY: ${CERC_L1_PRIV_KEY}
+      CERC_L1_ADDRESS_2: ${CERC_L1_ADDRESS_2}
+      CERC_L1_PRIV_KEY_2: ${CERC_L1_PRIV_KEY_2}
+    # Waits for L1 endpoint to be up before running the script
+    command: |
+      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./run.sh"
     volumes:
       - ../config/network/wait-for-it.sh:/app/packages/contracts-bedrock/wait-for-it.sh
-      - ../config/fixturenet-optimism/optimism-contracts/deploy-contracts.sh:/app/packages/contracts-bedrock/deploy-contracts.sh
+      - ../config/optimism-contracts/hardhat-tasks/verify-contract-deployment.ts:/app/packages/contracts-bedrock/tasks/verify-contract-deployment.ts
+      - ../config/optimism-contracts/hardhat-tasks/rekey-json.ts:/app/packages/contracts-bedrock/tasks/rekey-json.ts
+      - ../config/optimism-contracts/hardhat-tasks/send-balance.ts:/app/packages/contracts-bedrock/tasks/send-balance.ts
+      - ../config/fixturenet-optimism/optimism-contracts/update-config.js:/app/packages/contracts-bedrock/update-config.js
+      - ../config/fixturenet-optimism/optimism-contracts/run.sh:/app/packages/contracts-bedrock/run.sh
       - l2_accounts:/l2-accounts
-      - l1_deployment:/l1-deployment
-      - l2_config:/l2-config
-    # Waits for L1 endpoint to be up before running the contract deploy script
-    command: |
-      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./deploy-contracts.sh"
-
-  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
-  op-geth:
-    restart: always
-    image: cerc/optimism-l2geth:local
-    hostname: op-geth
-    depends_on:
-      op-node:
-        condition: service_started
-    volumes:
-      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
-      - l2_config:/l2-config:ro
-      - l2_accounts:/l2-accounts:ro
-      - l2_geth_data:/datadir
-    entrypoint: "sh"
-    command: "/run-op-geth.sh"
-    ports:
-      - "8545"
-      - "8546"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost:8545"]
-      interval: 30s
-      timeout: 10s
-      retries: 100
-      start_period: 10s
+      - l1_deployment:/app/packages/contracts-bedrock
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Runs the L2 consensus client (Sequencer node)
-  # Generates the L2 config files if not already present (outputs to volume l2_config)
-  op-node:
-    restart: always
+  # Generates the config files required for L2 (outputs to volume l2_config)
+  op-node-l2-config-gen:
+    restart: on-failure
     image: cerc/optimism-op-node:local
-    hostname: op-node
     depends_on:
       fixturenet-optimism-contracts:
         condition: service_completed_successfully
@@ -69,19 +47,60 @@ services:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_L1_RPC: ${CERC_L1_RPC}
     volumes:
-      - ../config/fixturenet-optimism/run-op-node.sh:/run-op-node.sh
-      - l1_deployment:/l1-deployment:ro
-      - l2_config:/l2-config
+      - ../config/fixturenet-optimism/generate-l2-config.sh:/app/generate-l2-config.sh
+      - l1_deployment:/contracts-bedrock:ro
+      - l2_config:/app
+    command: ["sh", "/app/generate-l2-config.sh"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
+  op-geth:
+    restart: always
+    image: cerc/optimism-l2geth:local
+    depends_on:
+      op-node-l2-config-gen:
+        condition: service_started
+    volumes:
+      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
+      - l2_config:/op-node:ro
       - l2_accounts:/l2-accounts:ro
+      - l2_geth_data:/datadir
     entrypoint: "sh"
-    command: "/run-op-node.sh"
+    command: "/run-op-geth.sh"
     ports:
-      - "8547"
+      - "0.0.0.0:8545:8545"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost:8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 10s
+
+  # Runs the L2 consensus client (Sequencer node)
+  op-node:
+    restart: always
+    image: cerc/optimism-op-node:local
+    depends_on:
+      op-geth:
+        condition: service_healthy
+    env_file:
+      - ../config/fixturenet-optimism/l1-params.env
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_L1_RPC: ${CERC_L1_RPC}
+    volumes:
+      - ../config/fixturenet-optimism/run-op-node.sh:/app/run-op-node.sh
+      - l2_config:/op-node-data:ro
+      - l2_accounts:/l2-accounts:ro
+    command: ["sh", "/app/run-op-node.sh"]
+    ports:
+      - "0.0.0.0:8547:8547"
     healthcheck:
       test: ["CMD", "nc", "-vz", "localhost:8547"]
       interval: 30s
       timeout: 10s
-      retries: 100
+      retries: 10
       start_period: 10s
     extra_hosts:
       - "host.docker.internal:host-gateway"
@@ -90,7 +109,6 @@ services:
   op-batcher:
     restart: always
     image: cerc/optimism-op-batcher:local
-    hostname: op-batcher
     depends_on:
       op-node:
         condition: service_healthy
@@ -110,7 +128,7 @@ services:
     command: |
       "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-batcher.sh"
     ports:
-      - "8548"
+      - "127.0.0.1:8548:8548"
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
@@ -118,29 +136,25 @@ services:
   op-proposer:
     restart: always
     image: cerc/optimism-op-proposer:local
-    hostname: op-proposer
     depends_on:
       op-node:
         condition: service_healthy
-      op-geth:
-        condition: service_healthy
     env_file:
       - ../config/fixturenet-optimism/l1-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_L1_RPC: ${CERC_L1_RPC}
-      CERC_L1_CHAIN_ID: ${CERC_L1_CHAIN_ID}
     volumes:
       - ../config/network/wait-for-it.sh:/wait-for-it.sh
       - ../config/fixturenet-optimism/run-op-proposer.sh:/run-op-proposer.sh
-      - l1_deployment:/l1-deployment:ro
+      - l1_deployment:/contracts-bedrock:ro
       - l2_accounts:/l2-accounts:ro
     entrypoint: ["sh", "-c"]
     # Waits for L1 endpoint to be up before running the proposer
     command: |
       "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-proposer.sh"
     ports:
-      - "8560"
+      - "127.0.0.1:8560:8560"
     extra_hosts:
       - "host.docker.internal:host-gateway"
 

app/data/compose/docker-compose-fixturenet-plugeth.yml

@@ -20,7 +20,7 @@ services:
       - SYS_PTRACE
     environment:
       CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
-      CERC_RUN_STATEDIFF: ${CERC_RUN_STATEDIFF:-detect}
+      CERC_RUN_STATEDIFF: "detect"
       CERC_STATEDIFF_DB_NODE_ID: 1
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
     env_file:
@@ -38,7 +38,6 @@ services:
       - fixturenet-eth-bootnode-geth
     ports:
       - "8545"
-      - "8546"
       - "40000"
       - "6060"
 
@@ -60,9 +59,6 @@ services:
       - fixturenet-eth-bootnode-geth
     volumes:
       - fixturenet_plugeth_geth_2_data:/root/ethdata
-    ports:
-      - "8545"
-      - "8546"
 
   fixturenet-eth-bootnode-lighthouse:
     restart: always

app/data/compose/docker-compose-graph-node.yml

@@ -6,6 +6,9 @@ services:
         condition: service_healthy
       ipfs:
         condition: service_healthy
+      # Uncomment when running against fixturenet-lotus to wait for the Lotus node to come up
+      # lotus-node-1:
+      #   condition: service_healthy
     extra_hosts:
       - host.docker.internal:host-gateway
     environment:
@@ -15,13 +18,9 @@ services:
       postgres_user: graph-node
       postgres_pass: password
       postgres_db: graph-node
-      ethereum: ${ETH_NETWORKS:-lotus-fixturenet:http://lotus-node-1:1234/rpc/v1}
+      ethereum: ${NETWORK:-filecoin}:${ETH_RPC_ENDPOINT:-https://archive.lotus.vdb.to/rpc/v1}
       GRAPH_LOG: debug
       ETHEREUM_REORG_THRESHOLD: 3
-    entrypoint: ["bash", "-c"]
-    # Wait for ETH RPC endpoint to be up when running with fixturenet-lotus
-    command: |
-      "wait_for ${ETH_RPC_HOST:-lotus-node-1}:${ETH_RPC_PORT:-1234} -t 1800 -- start"
     ports:
       - "8000"
       - "8001"

app/data/compose/docker-compose-kubo.yml

@@ -0,0 +1,13 @@
+version: "3.2"
+# See: https://docs.ipfs.tech/install/run-ipfs-inside-docker/#set-up
+services:
+  ipfs:
+    image: ipfs/kubo:master-2023-02-20-714a968
+    restart: always
+    volumes:
+      - ./ipfs/import:/import
+      - ./ipfs/data:/data/ipfs
+    ports:
+      - "0.0.0.0:8080:8080"
+      - "0.0.0.0:4001:4001"
+      - "0.0.0.0:5001:5001"

app/data/compose/docker-compose-mainnet-eth-keycloak.yml

@@ -6,7 +6,7 @@ services:
     env_file:
       - ../config/mainnet-eth-keycloak/keycloak.env
     healthcheck:
-      test: ["CMD", "nc", "-v", "localhost", "35432"]
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
       interval: 30s
       timeout: 10s
       retries: 10
@@ -14,7 +14,7 @@ services:
     volumes:
       - mainnet_eth_keycloak_db:/var/lib/postgresql/data
     ports:
-      - 35432
+      - 5432
 
   keycloak:
     image: cerc/keycloak:local

app/data/compose/docker-compose-test.yml

@@ -1,8 +1,13 @@
 services:
-  webapp:
-    image: cerc/webapp-container:local
+  test:
+    image: cerc/test-container:local
     restart: always
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+    volumes:
+      - test-data:/data
     ports:
       - "80"
+
+volumes:
+  test-data:

app/data/compose/docker-compose-watcher-azimuth.yml

@@ -10,7 +10,6 @@ services:
       - POSTGRES_MULTIPLE_DATABASES=azimuth-watcher,azimuth-watcher-job-queue,censures-watcher,censures-watcher-job-queue,claims-watcher,claims-watcher-job-queue,conditional-star-release-watcher,conditional-star-release-watcher-job-queue,delegated-sending-watcher,delegated-sending-watcher-job-queue,ecliptic-watcher,ecliptic-watcher-job-queue,linear-star-release-watcher,linear-star-release-watcher-job-queue,polls-watcher,polls-watcher-job-queue
       - POSTGRES_EXTENSION=azimuth-watcher-job-queue:pgcrypto,censures-watcher-job-queue:pgcrypto,claims-watcher-job-queue:pgcrypto,conditional-star-release-watcher-job-queue:pgcrypto,delegated-sending-watcher-job-queue:pgcrypto,ecliptic-watcher-job-queue:pgcrypto,linear-star-release-watcher-job-queue:pgcrypto,polls-watcher-job-queue:pgcrypto,
       - POSTGRES_PASSWORD=password
-    command: ["postgres", "-c", "max_connections=200"]
     volumes:
       - ../config/postgresql/multiple-postgressql-databases.sh:/docker-entrypoint-initdb.d/multiple-postgressql-databases.sh
       - watcher_db_data:/var/lib/postgresql/data
@@ -23,38 +22,6 @@ services:
       retries: 15
       start_period: 10s
 
-  # Starts the azimuth-watcher job runner
-  azimuth-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CERC_HISTORICAL_BLOCK_RANGE: 500
-      CONTRACT_ADDRESS: 0x223c067F8CF28ae173EE5CafEa60cA44C335fecB
-      CONTRACT_NAME: Azimuth
-      STARTING_BLOCK: 6784880
-    working_dir: /app/packages/azimuth-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/azimuth-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/azimuth-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/azimuth-watcher/start-job-runner.sh
-    ports:
-      - "9000"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9000"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the azimuth-watcher server
   azimuth-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -62,8 +29,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      azimuth-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
@@ -85,37 +52,6 @@ services:
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Starts the censures-watcher job runner
-  censures-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CONTRACT_ADDRESS: 0x325f68d32BdEe6Ed86E7235ff2480e2A433D6189
-      CONTRACT_NAME: Censures
-      STARTING_BLOCK: 6784954
-    working_dir: /app/packages/censures-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/censures-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/censures-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/censures-watcher/start-job-runner.sh
-    ports:
-      - "9002"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9002"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the censures-watcher server
   censures-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -123,8 +59,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      censures-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
@@ -146,37 +82,6 @@ services:
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Starts the claims-watcher job runner
-  claims-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CONTRACT_ADDRESS: 0xe7e7f69b34D7d9Bd8d61Fb22C33b22708947971A
-      CONTRACT_NAME: Claims
-      STARTING_BLOCK: 6784941
-    working_dir: /app/packages/claims-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/claims-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/claims-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/claims-watcher/start-job-runner.sh
-    ports:
-      - "9004"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9004"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the claims-watcher server
   claims-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -184,8 +89,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      claims-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
@@ -207,37 +112,6 @@ services:
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Starts the conditional-star-release-watcher job runner
-  conditional-star-release-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CONTRACT_ADDRESS: 0x8C241098C3D3498Fe1261421633FD57986D74AeA
-      CONTRACT_NAME: ConditionalStarRelease
-      STARTING_BLOCK: 6828004
-    working_dir: /app/packages/conditional-star-release-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/conditional-star-release-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/conditional-star-release-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/conditional-star-release-watcher/start-job-runner.sh
-    ports:
-      - "9006"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9006"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the conditional-star-release-watcher server
   conditional-star-release-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -245,8 +119,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      conditional-star-release-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
@@ -268,37 +142,6 @@ services:
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Starts the delegated-sending-watcher job runner
-  delegated-sending-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CONTRACT_ADDRESS: 0xf6b461fE1aD4bd2ce25B23Fe0aff2ac19B3dFA76
-      CONTRACT_NAME: DelegatedSending
-      STARTING_BLOCK: 6784956
-    working_dir: /app/packages/delegated-sending-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/delegated-sending-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/delegated-sending-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/delegated-sending-watcher/start-job-runner.sh
-    ports:
-      - "9008"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9008"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the delegated-sending-watcher server
   delegated-sending-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -306,8 +149,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      delegated-sending-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
@@ -329,37 +172,6 @@ services:
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Starts the ecliptic-watcher job runner
-  ecliptic-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CONTRACT_ADDRESS: 0x33EeCbf908478C10614626A9D304bfe18B78DD73
-      CONTRACT_NAME: Ecliptic
-      STARTING_BLOCK: 13692129
-    working_dir: /app/packages/ecliptic-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/ecliptic-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/ecliptic-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/ecliptic-watcher/start-job-runner.sh
-    ports:
-      - "9010"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9010"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the ecliptic-watcher server
   ecliptic-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -367,8 +179,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      ecliptic-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
@@ -390,37 +202,6 @@ services:
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Starts the linear-star-release-watcher job runner
-  linear-star-release-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CONTRACT_ADDRESS: 0x86cd9cd0992F04231751E3761De45cEceA5d1801
-      CONTRACT_NAME: LinearStarRelease
-      STARTING_BLOCK: 6784943
-    working_dir: /app/packages/linear-star-release-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/linear-star-release-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/linear-star-release-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/linear-star-release-watcher/start-job-runner.sh
-    ports:
-      - "9012"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9012"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the linear-star-release-watcher server
   linear-star-release-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -428,8 +209,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      linear-star-release-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
@@ -451,37 +232,6 @@ services:
     extra_hosts:
       - "host.docker.internal:host-gateway"
 
-  # Starts the polls-watcher job runner
-  polls-watcher-job-runner:
-    image: cerc/watcher-azimuth:local
-    restart: unless-stopped
-    depends_on:
-      watcher-db:
-        condition: service_healthy
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}
-      CERC_IPLD_ETH_GQL: ${CERC_IPLD_ETH_GQL}
-      CONTRACT_ADDRESS: 0x7fEcaB617c868Bb5996d99D95200D2Fa708218e4
-      CONTRACT_NAME: Polls
-      STARTING_BLOCK: 6784912
-    working_dir: /app/packages/polls-watcher
-    command: "./start-job-runner.sh"
-    volumes:
-      - ../config/watcher-azimuth/watcher-config-template.toml:/app/packages/polls-watcher/environments/watcher-config-template.toml
-      - ../config/watcher-azimuth/merge-toml.js:/app/packages/polls-watcher/merge-toml.js
-      - ../config/watcher-azimuth/start-job-runner.sh:/app/packages/polls-watcher/start-job-runner.sh
-    ports:
-      - "9014"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost", "9014"]
-      interval: 20s
-      timeout: 5s
-      retries: 15
-      start_period: 5s
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
   # Starts the polls-watcher server
   polls-watcher-server:
     image: cerc/watcher-azimuth:local
@@ -489,8 +239,8 @@ services:
     depends_on:
       watcher-db:
         condition: service_healthy
-      polls-watcher-job-runner:
-        condition: service_healthy
+    env_file:
+      - ../config/watcher-azimuth/watcher-params.env
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
       CERC_IPLD_ETH_RPC: ${CERC_IPLD_ETH_RPC}

app/data/compose/docker-compose-watcher-erc20.yml

@@ -34,7 +34,7 @@ services:
       - ETH_RPC_URL=http://go-ethereum:8545
     command: ["sh", "-c", "yarn server"]
     volumes:
-      - ../config/watcher-erc20/erc20-watcher.toml:/app/environments/local.toml
+      - ../config/watcher-erc20/erc20-watcher.toml:/app/packages/erc20-watcher/environments/local.toml
     ports:
       - "0.0.0.0:3002:3001"
       - "0.0.0.0:9002:9001"

app/data/config/fixturenet-laconicd/create-fixturenet.sh

@@ -0,0 +1,118 @@
+#!/bin/bash
+
+# TODO: this file is now an unmodified copy of cerc-io/laconicd/init.sh
+# so we should have a mechanism to bundle it inside the container rather than link from here
+# at deploy time.
+
+KEY="mykey"
+CHAINID="laconic_9000-1"
+MONIKER="localtestnet"
+KEYRING="test"
+KEYALGO="eth_secp256k1"
+LOGLEVEL="info"
+# trace evm
+TRACE="--trace"
+# TRACE=""
+
+# validate dependencies are installed
+command -v jq > /dev/null 2>&1 || { echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"; exit 1; }
+
+# remove existing daemon and client
+rm -rf ~/.laconic*
+
+make install
+
+laconicd config keyring-backend $KEYRING
+laconicd config chain-id $CHAINID
+
+# if $KEY exists it should be deleted
+laconicd keys add $KEY --keyring-backend $KEYRING --algo $KEYALGO
+
+# Set moniker and chain-id for Ethermint (Moniker can be anything, chain-id must be an integer)
+laconicd init $MONIKER --chain-id $CHAINID
+
+# Change parameter token denominations to aphoton
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["staking"]["params"]["bond_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["crisis"]["constant_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["gov"]["deposit_params"]["min_deposit"][0]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["mint"]["params"]["mint_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+# Custom modules
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commit_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveal_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_minimum_bid"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+
+if [[ "$TEST_REGISTRY_EXPIRY" == "true" ]]; then
+  echo "Setting timers for expiry tests."
+
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+fi
+
+if [[ "$TEST_AUCTION_ENABLED" == "true" ]]; then
+  echo "Enabling auction and setting timers."
+
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_enabled"]=true' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="300s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+fi
+
+# increase block time (?)
+cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["time_iota_ms"]="1000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+
+# Set gas limit in genesis
+cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["max_gas"]="10000000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
+
+# disable produce empty block
+if [[ "$OSTYPE" == "darwin"* ]]; then
+    sed -i '' 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
+  else
+    sed -i 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
+fi
+
+if [[ $1 == "pending" ]]; then
+  if [[ "$OSTYPE" == "darwin"* ]]; then
+      sed -i '' 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+      sed -i '' 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+  else
+      sed -i 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+      sed -i 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
+  fi
+fi
+
+# Allocate genesis accounts (cosmos formatted addresses)
+laconicd add-genesis-account $KEY 100000000000000000000000000aphoton --keyring-backend $KEYRING
+
+# Sign genesis transaction
+laconicd gentx $KEY 1000000000000000000000aphoton --keyring-backend $KEYRING --chain-id $CHAINID
+
+# Collect genesis tx
+laconicd collect-gentxs
+
+# Run this to ensure everything worked and that the genesis file is setup correctly
+laconicd validate-genesis
+
+if [[ $1 == "pending" ]]; then
+  echo "pending mode is on, please wait for the first block committed."
+fi
+
+# Start the node (remove the --pruning=nothing flag if historical queries are not needed)
+laconicd start --pruning=nothing --evm.tracer=json $TRACE --log_level $LOGLEVEL --minimum-gas-prices=0.0001aphoton --json-rpc.api eth,txpool,personal,net,debug,web3,miner --api.enable --gql-server --gql-playground

app/data/config/fixturenet-optimism/generate-l2-config.sh

@@ -0,0 +1,37 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
+
+# Check existing config if it exists
+if [ -f /app/jwt.txt ] && [ -f /app/rollup.json ]; then
+  echo "Found existing L2 config, cross-checking with L1 deployment config"
+
+  SOURCE_L1_CONF=$(cat /contracts-bedrock/deploy-config/getting-started.json)
+  EXP_L1_BLOCKHASH=$(echo "$SOURCE_L1_CONF" | jq -r '.l1StartingBlockTag')
+  EXP_BATCHER=$(echo "$SOURCE_L1_CONF" | jq -r '.batchSenderAddress')
+
+  GEN_L2_CONF=$(cat /app/rollup.json)
+  GEN_L1_BLOCKHASH=$(echo "$GEN_L2_CONF" | jq -r '.genesis.l1.hash')
+  GEN_BATCHER=$(echo "$GEN_L2_CONF" | jq -r '.genesis.system_config.batcherAddr')
+
+  if [ "$EXP_L1_BLOCKHASH" = "$GEN_L1_BLOCKHASH" ] && [ "$EXP_BATCHER" = "$GEN_BATCHER" ]; then
+    echo "Config cross-checked, exiting"
+    exit 0
+  fi
+
+  echo "Existing L2 config doesn't match the L1 deployment config, please clear L2 config volume before starting"
+  exit 1
+fi
+
+op-node genesis l2 \
+  --deploy-config /contracts-bedrock/deploy-config/getting-started.json \
+  --deployment-dir /contracts-bedrock/deployments/getting-started/ \
+  --outfile.l2 /app/genesis.json \
+  --outfile.rollup /app/rollup.json \
+  --l1-rpc $CERC_L1_RPC
+
+openssl rand -hex 32 > /app/jwt.txt

app/data/config/fixturenet-optimism/optimism-contracts/run.sh

@@ -0,0 +1,131 @@
+#!/bin/bash
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_L1_CHAIN_ID="${CERC_L1_CHAIN_ID:-${DEFAULT_CERC_L1_CHAIN_ID}}"
+CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
+
+CERC_L1_ACCOUNTS_CSV_URL="${CERC_L1_ACCOUNTS_CSV_URL:-${DEFAULT_CERC_L1_ACCOUNTS_CSV_URL}}"
+
+echo "Using L1 RPC endpoint ${CERC_L1_RPC}"
+
+IMPORT_1="import './verify-contract-deployment'"
+IMPORT_2="import './rekey-json'"
+IMPORT_3="import './send-balance'"
+
+# Append mounted tasks to tasks/index.ts file if not present
+if ! grep -Fxq "$IMPORT_1" tasks/index.ts; then
+  echo "$IMPORT_1" >> tasks/index.ts
+  echo "$IMPORT_2" >> tasks/index.ts
+  echo "$IMPORT_3" >> tasks/index.ts
+fi
+
+# Update the chainId in the hardhat config
+sed -i "/getting-started/ {n; s/.*chainId.*/      chainId: $CERC_L1_CHAIN_ID,/}" hardhat.config.ts
+
+# Exit if a deployment already exists (on restarts)
+# Note: fixturenet-eth-geth currently starts fresh on a restart
+if [ -d "deployments/getting-started" ]; then
+  echo "Deployment directory deployments/getting-started found, checking SystemDictator deployment"
+
+  # Read JSON file into variable
+  SYSTEM_DICTATOR_DETAILS=$(cat deployments/getting-started/SystemDictator.json)
+
+  # Parse JSON into variables
+  SYSTEM_DICTATOR_ADDRESS=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.address')
+  SYSTEM_DICTATOR_TXHASH=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.transactionHash')
+
+  if yarn hardhat verify-contract-deployment --contract "${SYSTEM_DICTATOR_ADDRESS}" --transaction-hash "${SYSTEM_DICTATOR_TXHASH}"; then
+    echo "Deployment verfication successful, exiting"
+    exit 0
+  else
+    echo "Deployment verfication failed, please clear L1 deployment volume before starting"
+    exit 1
+  fi
+fi
+
+# Generate the L2 account addresses
+yarn hardhat rekey-json --output /l2-accounts/keys.json
+
+# Read JSON file into variable
+KEYS_JSON=$(cat /l2-accounts/keys.json)
+
+# Parse JSON into variables
+ADMIN_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Admin.address')
+ADMIN_PRIV_KEY=$(echo "$KEYS_JSON" | jq -r '.Admin.privateKey')
+PROPOSER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Proposer.address')
+BATCHER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Batcher.address')
+SEQUENCER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Sequencer.address')
+
+# Get the private keys of L1 accounts
+if [ -n "$CERC_L1_ACCOUNTS_CSV_URL" ] && \
+  l1_accounts_response=$(curl -L --write-out '%{http_code}' --silent --output /dev/null "$CERC_L1_ACCOUNTS_CSV_URL") && \
+  [ "$l1_accounts_response" -eq 200 ];
+then
+  echo "Fetching L1 account credentials using provided URL"
+  mkdir -p /geth-accounts
+  wget -O /geth-accounts/accounts.csv "$CERC_L1_ACCOUNTS_CSV_URL"
+
+  CERC_L1_ADDRESS=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 2)
+  CERC_L1_PRIV_KEY=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
+  CERC_L1_ADDRESS_2=$(awk -F, 'NR==2{print $(NF-1)}' /geth-accounts/accounts.csv)
+  CERC_L1_PRIV_KEY_2=$(awk -F, 'NR==2{print $NF}' /geth-accounts/accounts.csv)
+else
+  echo "Couldn't fetch L1 account credentials, using them from env"
+fi
+
+# Send balances to the above L2 addresses
+yarn hardhat send-balance --to "${ADMIN_ADDRESS}" --amount 2 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
+yarn hardhat send-balance --to "${PROPOSER_ADDRESS}" --amount 5 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
+yarn hardhat send-balance --to "${BATCHER_ADDRESS}" --amount 1000 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
+
+echo "Balances sent to L2 accounts"
+
+# Select a finalized L1 block as the starting point for roll ups
+until FINALIZED_BLOCK=$(cast block finalized --rpc-url "$CERC_L1_RPC"); do
+    echo "Waiting for a finalized L1 block to exist, retrying after 10s"
+    sleep 10
+done
+
+L1_BLOCKNUMBER=$(echo "$FINALIZED_BLOCK" | awk '/number/{print $2}')
+L1_BLOCKHASH=$(echo "$FINALIZED_BLOCK" | awk '/hash/{print $2}')
+L1_BLOCKTIMESTAMP=$(echo "$FINALIZED_BLOCK" | awk '/timestamp/{print $2}')
+
+echo "Selected L1 block ${L1_BLOCKNUMBER} as the starting block for roll ups"
+
+# Update the deployment config
+sed -i 's/"l2OutputOracleStartingTimestamp": TIMESTAMP/"l2OutputOracleStartingTimestamp": '"$L1_BLOCKTIMESTAMP"'/g' deploy-config/getting-started.json
+jq --arg chainid "$CERC_L1_CHAIN_ID" '.l1ChainID = ($chainid | tonumber)' deploy-config/getting-started.json > tmp.json && mv tmp.json deploy-config/getting-started.json
+
+node update-config.js deploy-config/getting-started.json "$ADMIN_ADDRESS" "$PROPOSER_ADDRESS" "$BATCHER_ADDRESS" "$SEQUENCER_ADDRESS" "$L1_BLOCKHASH"
+
+echo "Updated the deployment config"
+
+# Create a .env file
+echo "L1_RPC=$CERC_L1_RPC" > .env
+echo "PRIVATE_KEY_DEPLOYER=$ADMIN_PRIV_KEY" >> .env
+
+echo "Deploying the L1 smart contracts, this will take a while..."
+
+# Deploy the L1 smart contracts
+yarn hardhat deploy --network getting-started --tags l1
+
+echo "Deployed the L1 smart contracts"
+
+# Read Proxy contract's JSON and get the address
+PROXY_JSON=$(cat deployments/getting-started/Proxy__OVM_L1StandardBridge.json)
+PROXY_ADDRESS=$(echo "$PROXY_JSON" | jq -r '.address')
+
+# Send balance to the above Proxy contract in L1 for reflecting balance in L2
+# First account
+yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
+# Second account
+yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY_2}" --network getting-started
+
+echo "Balance sent to Proxy L2 contract"
+echo "Use following accounts for transactions in L2:"
+echo "${CERC_L1_ADDRESS}"
+echo "${CERC_L1_ADDRESS_2}"
+echo "Done"

app/data/config/fixturenet-optimism/optimism-contracts/update-config.js

@@ -0,0 +1,36 @@
+const fs = require('fs')
+
+// Get the command-line argument
+const configFile = process.argv[2]
+const adminAddress = process.argv[3]
+const proposerAddress = process.argv[4]
+const batcherAddress = process.argv[5]
+const sequencerAddress = process.argv[6]
+const blockHash = process.argv[7]
+
+// Read the JSON file
+const configData = fs.readFileSync(configFile)
+const configObj = JSON.parse(configData)
+
+// Update the finalSystemOwner property with the ADMIN_ADDRESS value
+configObj.finalSystemOwner =
+  configObj.portalGuardian =
+  configObj.controller =
+  configObj.l2OutputOracleChallenger =
+  configObj.proxyAdminOwner =
+  configObj.baseFeeVaultRecipient =
+  configObj.l1FeeVaultRecipient =
+  configObj.sequencerFeeVaultRecipient =
+  configObj.governanceTokenOwner =
+    adminAddress
+
+configObj.l2OutputOracleProposer = proposerAddress
+
+configObj.batchSenderAddress = batcherAddress
+
+configObj.p2pSequencerAddress = sequencerAddress
+
+configObj.l1StartingBlockTag = blockHash
+
+// Write the updated JSON object back to the file
+fs.writeFileSync(configFile, JSON.stringify(configObj, null, 2))

app/data/config/fixturenet-optimism/run-op-batcher.sh

@@ -6,14 +6,22 @@ fi
 
 CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
 
-# Start op-batcher
-L2_RPC="http://op-geth:8545"
-ROLLUP_RPC="http://op-node:8547"
-BATCHER_KEY=$(cat /l2-accounts/accounts.json | jq -r .BatcherKey)
+# Get Batcher key from keys.json
+BATCHER_KEY=$(jq -r '.Batcher.privateKey' /l2-accounts/keys.json | tr -d '"')
 
+cleanup() {
+    echo "Signal received, cleaning up..."
+    kill ${batcher_pid}
+
+    wait
+    echo "Done"
+}
+trap 'cleanup' INT TERM
+
+# Run op-batcher
 op-batcher \
-  --l2-eth-rpc=$L2_RPC \
-  --rollup-rpc=$ROLLUP_RPC \
+  --l2-eth-rpc=http://op-geth:8545 \
+  --rollup-rpc=http://op-node:8547 \
   --poll-interval=1s \
   --sub-safety-margin=6 \
   --num-confirmations=1 \
@@ -24,4 +32,8 @@ op-batcher \
   --rpc.enable-admin \
   --max-channel-duration=1 \
   --l1-eth-rpc=$CERC_L1_RPC \
-  --private-key="${BATCHER_KEY#0x}"
+  --private-key=$BATCHER_KEY \
+  &
+
+batcher_pid=$!
+wait $batcher_pid

app/data/config/fixturenet-optimism/run-op-geth.sh

@@ -0,0 +1,90 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+# TODO: Add in container build or use other tool
+echo "Installing jq"
+apk update && apk add jq
+
+# Get Sequencer key from keys.json
+SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
+
+# Initialize op-geth if datadir/geth not found
+if [ -f /op-node/jwt.txt ] && [ -d datadir/geth ]; then
+  echo "Found existing datadir, checking block signer key"
+
+  BLOCK_SIGNER_KEY=$(cat datadir/block-signer-key)
+
+  if [ "$SEQUENCER_KEY" = "$BLOCK_SIGNER_KEY" ]; then
+    echo "Sequencer and block signer keys match, skipping initialization"
+  else
+    echo "Sequencer and block signer keys don't match, please clear L2 geth data volume before starting"
+    exit 1
+  fi
+else
+  echo "Initializing op-geth"
+
+  mkdir -p datadir
+  echo "pwd" > datadir/password
+  echo $SEQUENCER_KEY > datadir/block-signer-key
+
+  geth account import --datadir=datadir --password=datadir/password datadir/block-signer-key
+
+  while [ ! -f "/op-node/jwt.txt" ]
+  do
+    echo "Config files not created. Checking after 5 seconds."
+    sleep 5
+  done
+
+  echo "Config files created by op-node, proceeding with the initialization..."
+
+  geth init --datadir=datadir /op-node/genesis.json
+  echo "Node Initialized"
+fi
+
+SEQUENCER_ADDRESS=$(jq -r '.Sequencer.address' /l2-accounts/keys.json | tr -d '"')
+echo "SEQUENCER_ADDRESS: ${SEQUENCER_ADDRESS}"
+
+cleanup() {
+    echo "Signal received, cleaning up..."
+    kill ${geth_pid}
+
+    wait
+    echo "Done"
+}
+trap 'cleanup' INT TERM
+
+# Run op-geth
+geth \
+  --datadir ./datadir \
+  --http \
+  --http.corsdomain="*" \
+  --http.vhosts="*" \
+  --http.addr=0.0.0.0 \
+  --http.api=web3,debug,eth,txpool,net,engine \
+  --ws \
+  --ws.addr=0.0.0.0 \
+  --ws.port=8546 \
+  --ws.origins="*" \
+  --ws.api=debug,eth,txpool,net,engine \
+  --syncmode=full \
+  --gcmode=archive \
+  --nodiscover \
+  --maxpeers=0 \
+  --networkid=42069 \
+  --authrpc.vhosts="*" \
+  --authrpc.addr=0.0.0.0 \
+  --authrpc.port=8551 \
+  --authrpc.jwtsecret=/op-node/jwt.txt \
+  --rollup.disabletxpoolgossip=true \
+  --password=./datadir/password \
+  --allow-insecure-unlock \
+  --mine \
+  --miner.etherbase=$SEQUENCER_ADDRESS \
+  --unlock=$SEQUENCER_ADDRESS \
+  &
+
+geth_pid=$!
+wait $geth_pid

app/data/config/fixturenet-optimism/run-op-node.sh

@@ -0,0 +1,26 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
+
+# Get Sequencer key from keys.json
+SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
+
+# Run op-node
+op-node \
+  --l2=http://op-geth:8551 \
+  --l2.jwt-secret=/op-node-data/jwt.txt \
+  --sequencer.enabled \
+  --sequencer.l1-confs=3 \
+  --verifier.l1-confs=3 \
+  --rollup.config=/op-node-data/rollup.json \
+  --rpc.addr=0.0.0.0 \
+  --rpc.port=8547 \
+  --p2p.disable \
+  --rpc.enable-admin \
+  --p2p.sequencer.key=$SEQUENCER_KEY \
+  --l1=$CERC_L1_RPC \
+  --l1.rpckind=any

app/data/config/fixturenet-optimism/run-op-proposer.sh

@@ -0,0 +1,36 @@
+#!/bin/sh
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
+
+# Read the L2OutputOracle contract address from the deployment
+L2OO_DEPLOYMENT=$(cat /contracts-bedrock/deployments/getting-started/L2OutputOracle.json)
+L2OO_ADDR=$(echo "$L2OO_DEPLOYMENT" | jq -r '.address')
+
+# Get Proposer key from keys.json
+PROPOSER_KEY=$(jq -r '.Proposer.privateKey' /l2-accounts/keys.json | tr -d '"')
+
+cleanup() {
+    echo "Signal received, cleaning up..."
+    kill ${proposer_pid}
+
+    wait
+    echo "Done"
+}
+trap 'cleanup' INT TERM
+
+# Run op-proposer
+op-proposer \
+  --poll-interval 12s \
+  --rpc.port 8560 \
+  --rollup-rpc http://op-node:8547 \
+  --l2oo-address $L2OO_ADDR \
+  --private-key $PROPOSER_KEY \
+  --l1-eth-rpc $CERC_L1_RPC \
+  &
+
+proposer_pid=$!
+wait $proposer_pid