add Mars v2 interface (#744 )

Tested on DO with real funds on mainnet Co-authored-by: zramsay <zach@bluecollarcoding.ca> Reviewed-on: cerc-io/stack-orchestrator#744
Fix test failure
2024-02-19 19:11:59 +00:00 · 2024-02-18 12:28:48 -07:00 · 2024-02-18 12:20:01 -07:00 · 2024-02-18 18:55:55 +00:00 · 2024-02-17 14:29:53 +00:00 · 2024-02-17 01:54:30 +00:00
663 changed files with 43150 additions and 1452 deletions
--- a/.gitea/workflows/fixturenet-eth-plugeth-test.yml
+++ b/.gitea/workflows/fixturenet-eth-plugeth-test.yml
@ -6,6 +6,8 @@ on:
    paths:
      - '!**'
      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '2 14 * * *'

 # Needed until we can incorporate docker startup into the executor container
 env:
--- a/.gitea/workflows/fixturenet-laconicd-test.yml
+++ b/.gitea/workflows/fixturenet-laconicd-test.yml
@ -0,0 +1,48 @@
+name: Fixturenet-Laconicd-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-laconicd-test'
+  schedule:
+    - cron: '1 13 * * *'
+
+jobs:
+  test:
+    name: "Run an Laconicd fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Update'
+        run: apt-get update
+      - name: 'Setup jq'
+        run: apt-get install jq -y
+      - name: 'Check jq'
+        run: |
+          which jq
+          jq --version
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
--- a/.gitea/workflows/lint.yml
+++ b/.gitea/workflows/lint.yml
@ -0,0 +1,21 @@
+name: Lint Checks
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run linter"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name : "Run flake8"
+        uses: py-actions/flake8@v2
--- a/.gitea/workflows/test-container-registry.yml
+++ b/.gitea/workflows/test-container-registry.yml
@ -0,0 +1,54 @@
+name: Container Registry Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-container-registry'
+      - '.gitea/workflows/test-container-registry.yml'
+      - 'tests/container-registry/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '6 19 * * *'
+
+jobs:
+  test:
+    name: "Run contaier registry hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Install ed" # Only needed until we remove the need to edit the spec file
+        run: apt update && apt install -y ed
+      - name: "Run container registry deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/container-registry/run-test.sh
+
--- a/.gitea/workflows/test-database.yml
+++ b/.gitea/workflows/test-database.yml
@ -0,0 +1,52 @@
+name: Database Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-database'
+      - '.gitea/workflows/test-database.yml'
+      - 'tests/database/run-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '5 18 * * *'
+
+jobs:
+  test:
+    name: "Run database hosting test on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run database deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/database/run-test.sh
+
--- a/.gitea/workflows/test-k8s-deploy.yml
+++ b/.gitea/workflows/test-k8s-deploy.yml
@ -0,0 +1,54 @@
+name: K8s Deploy Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/test-k8s-deploy'
+      - '.gitea/workflows/test-k8s-deploy.yml'
+      - 'tests/k8s-deploy/run-deploy-test.sh'
+  schedule: # Note: coordinate with other tests to not overload runners at the same time of day
+    - cron: '3 15 * * *'
+
+jobs:
+  test:
+    name: "Run deploy test suite on kind/k8s"
+    runs-on: ubuntu-22.04
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Check cgroups version"
+        run: mount | grep cgroup
+      - name: "Install kind"
+        run: ./tests/scripts/install-kind.sh
+      - name: "Install Kubectl"
+        run: ./tests/scripts/install-kubectl.sh
+      - name: "Run k8s deployment test"
+        run: |
+          source /opt/bash-utils/cgroup-helper.sh
+          join_cgroup
+          ./tests/k8s-deploy/run-deploy-test.sh
+
--- a/.gitea/workflows/test-webapp.yml
+++ b/.gitea/workflows/test-webapp.yml
@ -0,0 +1,51 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches:
+      - main
+      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Install wget" # 20240109 - Only needed until the executors are updated.
+        run: apt update && apt install -y wget
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh
--- a/.gitea/workflows/triggers/fixturenet-eth-plugeth-test
+++ b/.gitea/workflows/triggers/fixturenet-eth-plugeth-test
@ -1,2 +1,3 @@
 Change this file to trigger running the fixturenet-eth-plugeth-test CI job
 trigger
+trigger
--- a/.gitea/workflows/triggers/fixturenet-eth-test
+++ b/.gitea/workflows/triggers/fixturenet-eth-test
@ -1,2 +1,2 @@
 Change this file to trigger running the fixturenet-eth-test CI job
-trigger
+
--- a/.gitea/workflows/triggers/fixturenet-laconicd-test
+++ b/.gitea/workflows/triggers/fixturenet-laconicd-test
@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+Trigger
+Trigger
--- a/.gitea/workflows/triggers/test-container-registry
+++ b/.gitea/workflows/triggers/test-container-registry
@ -0,0 +1 @@
+Change this file to trigger running the test-container-registry CI job
--- a/.gitea/workflows/triggers/test-database
+++ b/.gitea/workflows/triggers/test-database
@ -0,0 +1,2 @@
+Change this file to trigger running the test-database CI job
+Trigger test run
--- a/.gitea/workflows/triggers/test-k8s-deploy
+++ b/.gitea/workflows/triggers/test-k8s-deploy
@ -0,0 +1,2 @@
+Change this file to trigger running the test-k8s-deploy CI job
+Trigger test on PR branch
--- a/.github/workflows/fixturenet-eth.yml
+++ b/.github/workflows/fixturenet-eth.yml
@ -1,10 +1,11 @@
 name: Fixturenet-Eth Test

 on:
-  pull_request:
-    branches: '*'
  push:
    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-eth-test'

 jobs:
  test:
--- a/.github/workflows/fixturenet-laconicd.yml
+++ b/.github/workflows/fixturenet-laconicd.yml
@ -0,0 +1,30 @@
+name: Fixturenet-Laconicd Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-laconicd-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-laconicd test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh
--- a/.github/workflows/test-webapp.yml
+++ b/.github/workflows/test-webapp.yml
@ -0,0 +1,29 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches: '*'
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh
--- a/.github/workflows/triggers/fixturenet-eth-test
+++ b/.github/workflows/triggers/fixturenet-eth-test
@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+
--- a/.github/workflows/triggers/fixturenet-laconicd-test
+++ b/.github/workflows/triggers/fixturenet-laconicd-test
@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
+trigger
--- a/.gitignore
+++ b/.gitignore
@ -6,5 +6,5 @@ laconic_stack_orchestrator.egg-info
 __pycache__
 *~
 package
-app/data/build_tag.txt
-build
+stack_orchestrator/data/build_tag.txt
+/build
--- a/README.md
+++ b/README.md
@ -29,10 +29,10 @@ chmod +x ~/.docker/cli-plugins/docker-compose
 Next decide on a directory where you would like to put the stack-orchestrator program. Typically this would be 
 a "user" binary directory such as `~/bin` or perhaps `/usr/local/laconic` or possibly just the current working directory.

-Now, having selected that directory, download the latest release from [this page](https://github.com/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:
+Now, having selected that directory, download the latest release from [this page](https://git.vdb.to/cerc-io/stack-orchestrator/tags) into it (we're using `~/bin` below for concreteness but edit to suit if you selected a different directory). Also be sure that the destination directory exists and is writable:

 ```bash
-curl -L -o ~/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+curl -L -o ~/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 ```

 Give it execute permissions:
@ -52,7 +52,7 @@ Version: 1.1.0-7a607c2-202304260513
 Save the distribution url to `~/.laconic-so/config.yml`:
 ```bash
 mkdir ~/.laconic-so
-echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml
+echo "distribution-url: https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so" >  ~/.laconic-so/config.yml
 ```

 ### Update
@ -64,12 +64,12 @@ laconic-so update

 ## Usage

-The various [stacks](/app/data/stacks) each contain instructions for running different stacks based on your use case. For example:
+The various [stacks](/stack_orchestrator/data/stacks) each contain instructions for running different stacks based on your use case. For example:

- [self-hosted Gitea](/app/data/stacks/build-support)
- [an Optimism Fixturenet](/app/data/stacks/fixturenet-optimism)
- [laconicd with console and CLI](app/data/stacks/fixturenet-laconic-loaded)
- [kubo (IPFS)](app/data/stacks/kubo)
+- [self-hosted Gitea](/stack_orchestrator/data/stacks/build-support)
+- [an Optimism Fixturenet](/stack_orchestrator/data/stacks/fixturenet-optimism)
+- [laconicd with console and CLI](stack_orchestrator/data/stacks/fixturenet-laconic-loaded)
+- [kubo (IPFS)](stack_orchestrator/data/stacks/kubo)

 ## Contributing

--- a/app/build_containers.py
+++ b/app/build_containers.py
@ -1,143 +0,0 @@
-# Copyright © 2022, 2023 Vulcanize
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Affero General Public License for more details.
-
-# You should have received a copy of the GNU Affero General Public License
-# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
-
-# Builds or pulls containers for the system components
-
-# env vars:
-# CERC_REPO_BASE_DIR defaults to ~/cerc
-
-# TODO: display the available list of containers; allow re-build of either all or specific containers
-
-import os
-import sys
-from decouple import config
-import subprocess
-import click
-import importlib.resources
-from pathlib import Path
-from app.util import include_exclude_check, get_parsed_stack_config
-from app.base import get_npm_registry_url
-
-# TODO: find a place for this
-#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
-
-
-@click.command()
-@click.option('--include', help="only build these containers")
-@click.option('--exclude', help="don\'t build these containers")
-@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
-@click.option("--extra-build-args", help="Supply extra arguments to build")
-@click.pass_context
-def command(ctx, include, exclude, force_rebuild, extra_build_args):
-    '''build the set of containers required for a complete stack'''
-
-    quiet = ctx.obj.quiet
-    verbose = ctx.obj.verbose
-    dry_run = ctx.obj.dry_run
-    debug = ctx.obj.debug
-    local_stack = ctx.obj.local_stack
-    stack = ctx.obj.stack
-    continue_on_error = ctx.obj.continue_on_error
-
-    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    container_build_dir = Path(__file__).absolute().parent.joinpath("data", "container-build")
-
-    if local_stack:
-        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
-    else:
-        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
-
-    if not quiet:
-        print(f'Dev Root is: {dev_root_path}')
-
-    if not os.path.isdir(dev_root_path):
-        print('Dev root directory doesn\'t exist, creating')
-
-    # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
-    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
-        all_containers = container_list_file.read().splitlines()
-
-    containers_in_scope = []
-    if stack:
-        stack_config = get_parsed_stack_config(stack)
-        containers_in_scope = stack_config['containers']
-    else:
-        containers_in_scope = all_containers
-
-    if verbose:
-        print(f'Containers: {containers_in_scope}')
-        if stack:
-            print(f"Stack: {stack}")
-
-    # TODO: make this configurable
-    container_build_env = {
-        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
-        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
-        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
-        "CERC_REPO_BASE_DIR": dev_root_path,
-        "CERC_CONTAINER_BASE_DIR": container_build_dir,
-        "CERC_HOST_UID": f"{os.getuid()}",
-        "CERC_HOST_GID": f"{os.getgid()}",
-        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
-    }
-    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
-    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
-    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
-    docker_host_env = os.getenv("DOCKER_HOST")
-    if docker_host_env:
-        container_build_env.update({"DOCKER_HOST": docker_host_env})
-
-    def process_container(container):
-        if not quiet:
-            print(f"Building: {container}")
-        build_dir = os.path.join(container_build_dir, container.replace("/", "-"))
-        build_script_filename = os.path.join(build_dir, "build.sh")
-        if verbose:
-            print(f"Build script filename: {build_script_filename}")
-        if os.path.exists(build_script_filename):
-            build_command = build_script_filename
-        else:
-            if verbose:
-                print(f"No script file found: {build_script_filename}, using default build script")
-            repo_dir = container.split('/')[1]
-            # TODO: make this less of a hack -- should be specified in some metadata somewhere
-            # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
-            repo_full_path = os.path.join(dev_root_path, repo_dir)
-            repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
-            build_command = os.path.join(container_build_dir, "default-build.sh") + f" {container}:local {repo_dir_or_build_dir}"
-        if not dry_run:
-            if verbose:
-                print(f"Executing: {build_command} with environment: {container_build_env}")
-            build_result = subprocess.run(build_command, shell=True, env=container_build_env)
-            if verbose:
-                print(f"Return code is: {build_result.returncode}")
-            if build_result.returncode != 0:
-                print(f"Error running build for {container}")
-                if not continue_on_error:
-                    print("FATAL Error: container build failed and --continue-on-error not set, exiting")
-                    sys.exit(1)
-                else:
-                    print("****** Container Build Error, continuing because --continue-on-error is set")
-        else:
-            print("Skipped")
-
-    for container in containers_in_scope:
-        if include_exclude_check(container, include, exclude):
-            process_container(container)
-        else:
-            if verbose:
-                print(f"Excluding: {container}")
--- a/app/data/compose/docker-compose-kubo.yml
+++ b/app/data/compose/docker-compose-kubo.yml
@ -1,13 +0,0 @@
-version: "3.2"
-# See: https://docs.ipfs.tech/install/run-ipfs-inside-docker/#set-up
-services:
-  ipfs:
-    image: ipfs/kubo:master-2023-02-20-714a968
-    restart: always
-    volumes:
-      - ./ipfs/import:/import
-      - ./ipfs/data:/data/ipfs
-    ports:
-      - "0.0.0.0:8080:8080"
-      - "0.0.0.0:4001:4001"
-      - "0.0.0.0:5001:5001"
--- a/app/data/config/fixturenet-laconicd/create-fixturenet.sh
+++ b/app/data/config/fixturenet-laconicd/create-fixturenet.sh
@ -1,118 +0,0 @@
-#!/bin/bash
-
-# TODO: this file is now an unmodified copy of cerc-io/laconicd/init.sh
-# so we should have a mechanism to bundle it inside the container rather than link from here
-# at deploy time.
-
-KEY="mykey"
-CHAINID="laconic_9000-1"
-MONIKER="localtestnet"
-KEYRING="test"
-KEYALGO="eth_secp256k1"
-LOGLEVEL="info"
-# trace evm
-TRACE="--trace"
-# TRACE=""
-
-# validate dependencies are installed
-command -v jq > /dev/null 2>&1 || { echo >&2 "jq not installed. More info: https://stedolan.github.io/jq/download/"; exit 1; }
-
-# remove existing daemon and client
-rm -rf ~/.laconic*
-
-make install
-
-laconicd config keyring-backend $KEYRING
-laconicd config chain-id $CHAINID
-
-# if $KEY exists it should be deleted
-laconicd keys add $KEY --keyring-backend $KEYRING --algo $KEYALGO
-
-# Set moniker and chain-id for Ethermint (Moniker can be anything, chain-id must be an integer)
-laconicd init $MONIKER --chain-id $CHAINID
-
-# Change parameter token denominations to aphoton
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["staking"]["params"]["bond_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["crisis"]["constant_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["gov"]["deposit_params"]["min_deposit"][0]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["mint"]["params"]["mint_denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-# Custom modules
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commit_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveal_fee"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_minimum_bid"]["denom"]="aphoton"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-if [[ "$TEST_REGISTRY_EXPIRY" == "true" ]]; then
-  echo "Setting timers for expiry tests."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["record_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-if [[ "$TEST_AUCTION_ENABLED" == "true" ]]; then
-  echo "Enabling auction and setting timers."
-
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_enabled"]=true' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_rent_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_grace_period"]="300s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_commits_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-  cat $HOME/.laconicd/config/genesis.json | jq '.app_state["registry"]["params"]["authority_auction_reveals_duration"]="60s"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-fi
-
-# increase block time (?)
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["time_iota_ms"]="1000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# Set gas limit in genesis
-cat $HOME/.laconicd/config/genesis.json | jq '.consensus_params["block"]["max_gas"]="10000000"' > $HOME/.laconicd/config/tmp_genesis.json && mv $HOME/.laconicd/config/tmp_genesis.json $HOME/.laconicd/config/genesis.json
-
-# disable produce empty block
-if [[ "$OSTYPE" == "darwin"* ]]; then
-    sed -i '' 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-  else
-    sed -i 's/create_empty_blocks = true/create_empty_blocks = false/g' $HOME/.laconicd/config/config.toml
-fi
-
-if [[ $1 == "pending" ]]; then
-  if [[ "$OSTYPE" == "darwin"* ]]; then
-      sed -i '' 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i '' 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  else
-      sed -i 's/create_empty_blocks_interval = "0s"/create_empty_blocks_interval = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose = "3s"/timeout_propose = "30s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_propose_delta = "500ms"/timeout_propose_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote = "1s"/timeout_prevote = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_prevote_delta = "500ms"/timeout_prevote_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit = "1s"/timeout_precommit = "10s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_precommit_delta = "500ms"/timeout_precommit_delta = "5s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_commit = "5s"/timeout_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-      sed -i 's/timeout_broadcast_tx_commit = "10s"/timeout_broadcast_tx_commit = "150s"/g' $HOME/.laconicd/config/config.toml
-  fi
-fi
-
-# Allocate genesis accounts (cosmos formatted addresses)
-laconicd add-genesis-account $KEY 100000000000000000000000000aphoton --keyring-backend $KEYRING
-
-# Sign genesis transaction
-laconicd gentx $KEY 1000000000000000000000aphoton --keyring-backend $KEYRING --chain-id $CHAINID
-
-# Collect genesis tx
-laconicd collect-gentxs
-
-# Run this to ensure everything worked and that the genesis file is setup correctly
-laconicd validate-genesis
-
-if [[ $1 == "pending" ]]; then
-  echo "pending mode is on, please wait for the first block committed."
-fi
-
-# Start the node (remove the --pruning=nothing flag if historical queries are not needed)
-laconicd start --pruning=nothing --evm.tracer=json $TRACE --log_level $LOGLEVEL --minimum-gas-prices=0.0001aphoton --json-rpc.api eth,txpool,personal,net,debug,web3,miner --api.enable --gql-server --gql-playground
--- a/app/data/config/fixturenet-optimism/generate-l2-config.sh
+++ b/app/data/config/fixturenet-optimism/generate-l2-config.sh
@ -1,37 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Check existing config if it exists
-if [ -f /app/jwt.txt ] && [ -f /app/rollup.json ]; then
-  echo "Found existing L2 config, cross-checking with L1 deployment config"
-
-  SOURCE_L1_CONF=$(cat /contracts-bedrock/deploy-config/getting-started.json)
-  EXP_L1_BLOCKHASH=$(echo "$SOURCE_L1_CONF" | jq -r '.l1StartingBlockTag')
-  EXP_BATCHER=$(echo "$SOURCE_L1_CONF" | jq -r '.batchSenderAddress')
-
-  GEN_L2_CONF=$(cat /app/rollup.json)
-  GEN_L1_BLOCKHASH=$(echo "$GEN_L2_CONF" | jq -r '.genesis.l1.hash')
-  GEN_BATCHER=$(echo "$GEN_L2_CONF" | jq -r '.genesis.system_config.batcherAddr')
-
-  if [ "$EXP_L1_BLOCKHASH" = "$GEN_L1_BLOCKHASH" ] && [ "$EXP_BATCHER" = "$GEN_BATCHER" ]; then
-    echo "Config cross-checked, exiting"
-    exit 0
-  fi
-
-  echo "Existing L2 config doesn't match the L1 deployment config, please clear L2 config volume before starting"
-  exit 1
-fi
-
-op-node genesis l2 \
-  --deploy-config /contracts-bedrock/deploy-config/getting-started.json \
-  --deployment-dir /contracts-bedrock/deployments/getting-started/ \
-  --outfile.l2 /app/genesis.json \
-  --outfile.rollup /app/rollup.json \
-  --l1-rpc $CERC_L1_RPC
-
-openssl rand -hex 32 > /app/jwt.txt
--- a/app/data/config/fixturenet-optimism/optimism-contracts/run.sh
+++ b/app/data/config/fixturenet-optimism/optimism-contracts/run.sh
@ -1,131 +0,0 @@
-#!/bin/bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_CHAIN_ID="${CERC_L1_CHAIN_ID:-${DEFAULT_CERC_L1_CHAIN_ID}}"
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-CERC_L1_ACCOUNTS_CSV_URL="${CERC_L1_ACCOUNTS_CSV_URL:-${DEFAULT_CERC_L1_ACCOUNTS_CSV_URL}}"
-
-echo "Using L1 RPC endpoint ${CERC_L1_RPC}"
-
-IMPORT_1="import './verify-contract-deployment'"
-IMPORT_2="import './rekey-json'"
-IMPORT_3="import './send-balance'"
-
-# Append mounted tasks to tasks/index.ts file if not present
-if ! grep -Fxq "$IMPORT_1" tasks/index.ts; then
-  echo "$IMPORT_1" >> tasks/index.ts
-  echo "$IMPORT_2" >> tasks/index.ts
-  echo "$IMPORT_3" >> tasks/index.ts
-fi
-
-# Update the chainId in the hardhat config
-sed -i "/getting-started/ {n; s/.*chainId.*/      chainId: $CERC_L1_CHAIN_ID,/}" hardhat.config.ts
-
-# Exit if a deployment already exists (on restarts)
-# Note: fixturenet-eth-geth currently starts fresh on a restart
-if [ -d "deployments/getting-started" ]; then
-  echo "Deployment directory deployments/getting-started found, checking SystemDictator deployment"
-
-  # Read JSON file into variable
-  SYSTEM_DICTATOR_DETAILS=$(cat deployments/getting-started/SystemDictator.json)
-
-  # Parse JSON into variables
-  SYSTEM_DICTATOR_ADDRESS=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.address')
-  SYSTEM_DICTATOR_TXHASH=$(echo "$SYSTEM_DICTATOR_DETAILS" | jq -r '.transactionHash')
-
-  if yarn hardhat verify-contract-deployment --contract "${SYSTEM_DICTATOR_ADDRESS}" --transaction-hash "${SYSTEM_DICTATOR_TXHASH}"; then
-    echo "Deployment verfication successful, exiting"
-    exit 0
-  else
-    echo "Deployment verfication failed, please clear L1 deployment volume before starting"
-    exit 1
-  fi
-fi
-
-# Generate the L2 account addresses
-yarn hardhat rekey-json --output /l2-accounts/keys.json
-
-# Read JSON file into variable
-KEYS_JSON=$(cat /l2-accounts/keys.json)
-
-# Parse JSON into variables
-ADMIN_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Admin.address')
-ADMIN_PRIV_KEY=$(echo "$KEYS_JSON" | jq -r '.Admin.privateKey')
-PROPOSER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Proposer.address')
-BATCHER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Batcher.address')
-SEQUENCER_ADDRESS=$(echo "$KEYS_JSON" | jq -r '.Sequencer.address')
-
-# Get the private keys of L1 accounts
-if [ -n "$CERC_L1_ACCOUNTS_CSV_URL" ] && \
-  l1_accounts_response=$(curl -L --write-out '%{http_code}' --silent --output /dev/null "$CERC_L1_ACCOUNTS_CSV_URL") && \
-  [ "$l1_accounts_response" -eq 200 ];
-then
-  echo "Fetching L1 account credentials using provided URL"
-  mkdir -p /geth-accounts
-  wget -O /geth-accounts/accounts.csv "$CERC_L1_ACCOUNTS_CSV_URL"
-
-  CERC_L1_ADDRESS=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 2)
-  CERC_L1_PRIV_KEY=$(head -n 1 /geth-accounts/accounts.csv | cut -d ',' -f 3)
-  CERC_L1_ADDRESS_2=$(awk -F, 'NR==2{print $(NF-1)}' /geth-accounts/accounts.csv)
-  CERC_L1_PRIV_KEY_2=$(awk -F, 'NR==2{print $NF}' /geth-accounts/accounts.csv)
-else
-  echo "Couldn't fetch L1 account credentials, using them from env"
-fi
-
-# Send balances to the above L2 addresses
-yarn hardhat send-balance --to "${ADMIN_ADDRESS}" --amount 2 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${PROPOSER_ADDRESS}" --amount 5 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-yarn hardhat send-balance --to "${BATCHER_ADDRESS}" --amount 1000 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-
-echo "Balances sent to L2 accounts"
-
-# Select a finalized L1 block as the starting point for roll ups
-until FINALIZED_BLOCK=$(cast block finalized --rpc-url "$CERC_L1_RPC"); do
-    echo "Waiting for a finalized L1 block to exist, retrying after 10s"
-    sleep 10
-done
-
-L1_BLOCKNUMBER=$(echo "$FINALIZED_BLOCK" | awk '/number/{print $2}')
-L1_BLOCKHASH=$(echo "$FINALIZED_BLOCK" | awk '/hash/{print $2}')
-L1_BLOCKTIMESTAMP=$(echo "$FINALIZED_BLOCK" | awk '/timestamp/{print $2}')
-
-echo "Selected L1 block ${L1_BLOCKNUMBER} as the starting block for roll ups"
-
-# Update the deployment config
-sed -i 's/"l2OutputOracleStartingTimestamp": TIMESTAMP/"l2OutputOracleStartingTimestamp": '"$L1_BLOCKTIMESTAMP"'/g' deploy-config/getting-started.json
-jq --arg chainid "$CERC_L1_CHAIN_ID" '.l1ChainID = ($chainid | tonumber)' deploy-config/getting-started.json > tmp.json && mv tmp.json deploy-config/getting-started.json
-
-node update-config.js deploy-config/getting-started.json "$ADMIN_ADDRESS" "$PROPOSER_ADDRESS" "$BATCHER_ADDRESS" "$SEQUENCER_ADDRESS" "$L1_BLOCKHASH"
-
-echo "Updated the deployment config"
-
-# Create a .env file
-echo "L1_RPC=$CERC_L1_RPC" > .env
-echo "PRIVATE_KEY_DEPLOYER=$ADMIN_PRIV_KEY" >> .env
-
-echo "Deploying the L1 smart contracts, this will take a while..."
-
-# Deploy the L1 smart contracts
-yarn hardhat deploy --network getting-started --tags l1
-
-echo "Deployed the L1 smart contracts"
-
-# Read Proxy contract's JSON and get the address
-PROXY_JSON=$(cat deployments/getting-started/Proxy__OVM_L1StandardBridge.json)
-PROXY_ADDRESS=$(echo "$PROXY_JSON" | jq -r '.address')
-
-# Send balance to the above Proxy contract in L1 for reflecting balance in L2
-# First account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY}" --network getting-started
-# Second account
-yarn hardhat send-balance --to "${PROXY_ADDRESS}" --amount 1 --private-key "${CERC_L1_PRIV_KEY_2}" --network getting-started
-
-echo "Balance sent to Proxy L2 contract"
-echo "Use following accounts for transactions in L2:"
-echo "${CERC_L1_ADDRESS}"
-echo "${CERC_L1_ADDRESS_2}"
-echo "Done"
--- a/app/data/config/fixturenet-optimism/optimism-contracts/update-config.js
+++ b/app/data/config/fixturenet-optimism/optimism-contracts/update-config.js
@ -1,36 +0,0 @@
-const fs = require('fs')
-
-// Get the command-line argument
-const configFile = process.argv[2]
-const adminAddress = process.argv[3]
-const proposerAddress = process.argv[4]
-const batcherAddress = process.argv[5]
-const sequencerAddress = process.argv[6]
-const blockHash = process.argv[7]
-
-// Read the JSON file
-const configData = fs.readFileSync(configFile)
-const configObj = JSON.parse(configData)
-
-// Update the finalSystemOwner property with the ADMIN_ADDRESS value
-configObj.finalSystemOwner =
-  configObj.portalGuardian =
-  configObj.controller =
-  configObj.l2OutputOracleChallenger =
-  configObj.proxyAdminOwner =
-  configObj.baseFeeVaultRecipient =
-  configObj.l1FeeVaultRecipient =
-  configObj.sequencerFeeVaultRecipient =
-  configObj.governanceTokenOwner =
-    adminAddress
-
-configObj.l2OutputOracleProposer = proposerAddress
-
-configObj.batchSenderAddress = batcherAddress
-
-configObj.p2pSequencerAddress = sequencerAddress
-
-configObj.l1StartingBlockTag = blockHash
-
-// Write the updated JSON object back to the file
-fs.writeFileSync(configFile, JSON.stringify(configObj, null, 2))
--- a/app/data/config/fixturenet-optimism/run-op-geth.sh
+++ b/app/data/config/fixturenet-optimism/run-op-geth.sh
@ -1,90 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-# TODO: Add in container build or use other tool
-echo "Installing jq"
-apk update && apk add jq
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Initialize op-geth if datadir/geth not found
-if [ -f /op-node/jwt.txt ] && [ -d datadir/geth ]; then
-  echo "Found existing datadir, checking block signer key"
-
-  BLOCK_SIGNER_KEY=$(cat datadir/block-signer-key)
-
-  if [ "$SEQUENCER_KEY" = "$BLOCK_SIGNER_KEY" ]; then
-    echo "Sequencer and block signer keys match, skipping initialization"
-  else
-    echo "Sequencer and block signer keys don't match, please clear L2 geth data volume before starting"
-    exit 1
-  fi
-else
-  echo "Initializing op-geth"
-
-  mkdir -p datadir
-  echo "pwd" > datadir/password
-  echo $SEQUENCER_KEY > datadir/block-signer-key
-
-  geth account import --datadir=datadir --password=datadir/password datadir/block-signer-key
-
-  while [ ! -f "/op-node/jwt.txt" ]
-  do
-    echo "Config files not created. Checking after 5 seconds."
-    sleep 5
-  done
-
-  echo "Config files created by op-node, proceeding with the initialization..."
-
-  geth init --datadir=datadir /op-node/genesis.json
-  echo "Node Initialized"
-fi
-
-SEQUENCER_ADDRESS=$(jq -r '.Sequencer.address' /l2-accounts/keys.json | tr -d '"')
-echo "SEQUENCER_ADDRESS: ${SEQUENCER_ADDRESS}"
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${geth_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-geth
-geth \
-  --datadir ./datadir \
-  --http \
-  --http.corsdomain="*" \
-  --http.vhosts="*" \
-  --http.addr=0.0.0.0 \
-  --http.api=web3,debug,eth,txpool,net,engine \
-  --ws \
-  --ws.addr=0.0.0.0 \
-  --ws.port=8546 \
-  --ws.origins="*" \
-  --ws.api=debug,eth,txpool,net,engine \
-  --syncmode=full \
-  --gcmode=archive \
-  --nodiscover \
-  --maxpeers=0 \
-  --networkid=42069 \
-  --authrpc.vhosts="*" \
-  --authrpc.addr=0.0.0.0 \
-  --authrpc.port=8551 \
-  --authrpc.jwtsecret=/op-node/jwt.txt \
-  --rollup.disabletxpoolgossip=true \
-  --password=./datadir/password \
-  --allow-insecure-unlock \
-  --mine \
-  --miner.etherbase=$SEQUENCER_ADDRESS \
-  --unlock=$SEQUENCER_ADDRESS \
-  &
-
-geth_pid=$!
-wait $geth_pid
--- a/app/data/config/fixturenet-optimism/run-op-node.sh
+++ b/app/data/config/fixturenet-optimism/run-op-node.sh
@ -1,26 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Get Sequencer key from keys.json
-SEQUENCER_KEY=$(jq -r '.Sequencer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-# Run op-node
-op-node \
-  --l2=http://op-geth:8551 \
-  --l2.jwt-secret=/op-node-data/jwt.txt \
-  --sequencer.enabled \
-  --sequencer.l1-confs=3 \
-  --verifier.l1-confs=3 \
-  --rollup.config=/op-node-data/rollup.json \
-  --rpc.addr=0.0.0.0 \
-  --rpc.port=8547 \
-  --p2p.disable \
-  --rpc.enable-admin \
-  --p2p.sequencer.key=$SEQUENCER_KEY \
-  --l1=$CERC_L1_RPC \
-  --l1.rpckind=any
--- a/app/data/config/fixturenet-optimism/run-op-proposer.sh
+++ b/app/data/config/fixturenet-optimism/run-op-proposer.sh
@ -1,36 +0,0 @@
-#!/bin/sh
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-
-CERC_L1_RPC="${CERC_L1_RPC:-${DEFAULT_CERC_L1_RPC}}"
-
-# Read the L2OutputOracle contract address from the deployment
-L2OO_DEPLOYMENT=$(cat /contracts-bedrock/deployments/getting-started/L2OutputOracle.json)
-L2OO_ADDR=$(echo "$L2OO_DEPLOYMENT" | jq -r '.address')
-
-# Get Proposer key from keys.json
-PROPOSER_KEY=$(jq -r '.Proposer.privateKey' /l2-accounts/keys.json | tr -d '"')
-
-cleanup() {
-    echo "Signal received, cleaning up..."
-    kill ${proposer_pid}
-
-    wait
-    echo "Done"
-}
-trap 'cleanup' INT TERM
-
-# Run op-proposer
-op-proposer \
-  --poll-interval 12s \
-  --rpc.port 8560 \
-  --rollup-rpc http://op-node:8547 \
-  --l2oo-address $L2OO_ADDR \
-  --private-key $PROPOSER_KEY \
-  --l1-eth-rpc $CERC_L1_RPC \
-  &
-
-proposer_pid=$!
-wait $proposer_pid
--- a/app/data/config/watcher-azimuth/watcher-params.env
+++ b/app/data/config/watcher-azimuth/watcher-params.env
@ -1,5 +0,0 @@
-# Defaults
-
-# ipld-eth-server endpoints
-DEFAULT_CERC_IPLD_ETH_RPC=
-DEFAULT_CERC_IPLD_ETH_GQL=
--- a/app/data/container-build/cerc-laconic-console-host/config.yml
+++ b/app/data/container-build/cerc-laconic-console-host/config.yml
@ -1,6 +0,0 @@
-# Config for laconic-console running in a fixturenet with laconicd
-
-services:
-  wns:
-    server: 'LACONIC_HOSTED_ENDPOINT:9473/api'
-    webui: 'LACONIC_HOSTED_ENDPOINT:9473/console'
--- a/app/data/container-build/cerc-laconic-registry-cli/create-demo-records.sh
+++ b/app/data/container-build/cerc-laconic-registry-cli/create-demo-records.sh
@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-# Create some demo/test records in the registry
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-registry_command="laconic cns"
-record_1_filename=demo-record-1.yml
-cat <<EOF > ${record_1_filename}
-record:
-  type: WebsiteRegistrationRecord
-  url: 'https://cerc.io'
-  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
-  build_artifact_cid: QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
-  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
-  version: 1.0.23
-EOF
-# Check we have funds
-funds_response=$(${registry_command} account get --address $(cat my-address.txt))
-funds_balance=$(echo ${funds_response} | jq -r .[0].balance[0].quantity)
-echo "Balance is: ${funds_balance}"
-# Create a bond
-bond_create_result=$(${registry_command} bond create --type aphoton --quantity 1000000000)
-bond_id=$(echo ${bond_create_result} | jq -r .bondId)
-echo "Created bond with id: ${bond_id}"
-# Publish a demo record
-publish_response=$(${registry_command} record publish --filename ${record_1_filename} --bond-id ${bond_id})
-published_record_id=$(echo ${publish_response} | jq -r .id)
-echo "Published ${record_1_filename} with id: ${published_record_id}"
--- a/app/data/container-build/cerc-test-container/run.sh
+++ b/app/data/container-build/cerc-test-container/run.sh
@ -1,21 +0,0 @@
-#!/usr/bin/env bash
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-# Test if the container's filesystem is old (run previously) or new
-EXISTSFILENAME=/data/exists
-echo "Test container starting"
-if [[ -f "$EXISTSFILENAME" ]];
-then
-    TIMESTAMP=`cat $EXISTSFILENAME`
-    echo "Filesystem is old, created: $TIMESTAMP" 
-else
-    echo "Filesystem is fresh"
-    echo `date` > $EXISTSFILENAME
-fi
-if [ -n "$CERC_TEST_PARAM_1" ]; then
-  echo "Test-param-1: ${CERC_TEST_PARAM_1}"
-fi
-# Run nginx which will block here forever
-/usr/sbin/nginx -g "daemon off;"
--- a/app/data/container-build/cerc-webapp-base/start-serving-app.sh
+++ b/app/data/container-build/cerc-webapp-base/start-serving-app.sh
@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-    set -x
-fi
-
-CERC_WEBAPP_FILES_DIR="${CERC_WEBAPP_FILES_DIR:-/data}"
-
-/scripts/apply-webapp-config.sh /config/config.yml ${CERC_WEBAPP_FILES_DIR}
-http-server -p 80 ${CERC_WEBAPP_FILES_DIR}
--- a/app/data/stacks/azimuth/README.md
+++ b/app/data/stacks/azimuth/README.md
@ -1,72 +0,0 @@
-# Azimuth Watcher
-
-Instructions to setup and deploy Azimuth Watcher stack
-
-## Setup
-
-Prerequisite: `ipld-eth-server` RPC and GQL endpoints
-
-Clone required repositories:
-
-```bash
-laconic-so --stack azimuth setup-repositories
-```
-
-NOTE: If the repository already exists and checked out to a different version, `setup-repositories` command will throw an error.
-For getting around this, the `azimuth-watcher-ts` repository can be removed and then run the command.
-
-Checkout to the required versions and branches in repos
-
-```bash
-# azimuth-watcher-ts
-cd ~/cerc/azimuth-watcher-ts
-git checkout v0.1.0
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack azimuth build-containers
-```
-
-This should create the required docker images in the local image registry.
-
-### Configuration
-
-* Create and update an env file to be used in the next step:
-
-  ```bash
-  # External ipld-eth-server endpoints
-  CERC_IPLD_ETH_RPC=
-  CERC_IPLD_ETH_GQL=
-  ```
-
-* NOTE: If `ipld-eth-server` is running on the host machine, use `host.docker.internal` as the hostname to access host ports
-
-### Deploy the stack
-
-* Deploy the containers:
-
-  ```bash
-  laconic-so --stack azimuth deploy-system --env-file <PATH_TO_ENV_FILE> up
-  ```
-
-* List and check the health status of all the containers using `docker ps` and wait for them to be `healthy`
-
-## Clean up
-
-Stop all the services running in background:
-
-```bash
-laconic-so --stack azimuth deploy-system down
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*watcher_db_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*watcher_db_data")
-```
--- a/app/data/stacks/fixturenet-optimism/README.md
+++ b/app/data/stacks/fixturenet-optimism/README.md
@ -1,123 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy an end-to-end L1+L2 stack with [fixturenet-eth](../fixturenet-eth/) (L1) and [Optimism](https://stack.optimism.io) (L2)
-
-We support running just the L2 part of stack, given an external L1 endpoint. Follow the [L2 only doc](./l2-only.md) for the same.
-
-## Setup
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers
-
-# If redeploying with changes in the stack containers
-laconic-so --stack fixturenet-optimism build-containers --force-rebuild
-
-# If errors are thrown during build, old images used by this stack would have to be deleted
-```
-
-Note: this will take >10 mins depending on the specs of your machine, and **requires** 16GB of memory or greater.
-
-This should create the required docker images in the local image registry:
-* `cerc/go-ethereum`
-* `cerc/lighthouse`
-* `cerc/fixturenet-eth-geth`
-* `cerc/fixturenet-eth-lighthouse`
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy up
-```
-
-The `fixturenet-optimism-contracts` service takes a while to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-It may restart a few times after running into errors.
-
-To list and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-* If `op-geth` service aborts or is restarted, the following error might occur in the `op-node` service:
-
-  ```bash
-  WARN [02-16|21:22:02.868] Derivation process temporary error       attempts=14 err="stage 0 failed resetting: temp: failed to find the L2 Heads to start from: failed to fetch L2 block by hash 0x0000000000000000000000000000000000000000000000000000000000000000: failed to determine block-hash of hash 0x0000000000000000000000000000000000000000000000000000000000000000, could not get payload: not found"
-  ```
-
-* This means that the data directory that `op-geth` is using is corrupted and needs to be reinitialized; the containers `op-geth`, `op-node` and `op-batcher` need to be started afresh:
-
-  WARNING: This will reset the L2 chain; consequently, all the data on it will be lost
-
-  * Stop and remove the concerned containers:
-
-    ```bash
-    # List the containers
-    docker ps -f "name=op-geth|op-node|op-batcher"
-
-    # Force stop and remove the listed containers
-    docker rm -f $(docker ps -qf "name=op-geth|op-node|op-batcher")
-    ```
-
-  * Remove the concerned volume:
-
-    ```bash
-    # List the volume
-    docker volume ls -q --filter name=l2_geth_data
-
-    # Remove the listed volume
-    docker volume rm $(docker volume ls -q --filter name=l2_geth_data)
-    ```
-
-  * Re-run the deployment command used in [Deploy](#deploy) to restart the stopped containers
-
-## Known Issues
-
-* Resource requirements (memory + time) for building the `cerc/foundry` image are on the higher side
-  * `cerc/optimism-contracts` image is currently based on `cerc/foundry` (Optimism requires foundry installation)
--- a/app/data/stacks/fixturenet-optimism/l2-only.md
+++ b/app/data/stacks/fixturenet-optimism/l2-only.md
@ -1,100 +0,0 @@
-# fixturenet-optimism
-
-Instructions to setup and deploy L2 fixturenet using [Optimism](https://stack.optimism.io)
-
-## Setup
-
-Prerequisite: An L1 Ethereum RPC endpoint
-
-Clone required repositories:
-
-```bash
-laconic-so --stack fixturenet-optimism setup-repositories --exclude git.vdb.to/cerc-io/go-ethereum
-
-# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
-```
-
-Build the container images:
-
-```bash
-laconic-so --stack fixturenet-optimism build-containers --include cerc/foundry,cerc/optimism-contracts,cerc/optimism-op-node,cerc/optimism-l2geth,cerc/optimism-op-batcher,cerc/optimism-op-proposer
-```
-
-This should create the required docker images in the local image registry:
-* `cerc/foundry`
-* `cerc/optimism-contracts`
-* `cerc/optimism-l2geth`
-* `cerc/optimism-op-node`
-* `cerc/optimism-op-batcher`
-* `cerc/optimism-op-proposer`
-
-## Deploy
-
-Create and update an env file to be used in the next step ([defaults](../../config/fixturenet-optimism/l1-params.env)):
-
-  ```bash
-  # External L1 endpoint
-  CERC_L1_CHAIN_ID=
-  CERC_L1_RPC=
-  CERC_L1_HOST=
-  CERC_L1_PORT=
-
-  # URL to get CSV with credentials for accounts on L1
-  # that are used to send balance to Optimism Proxy contract
-  # (enables them to do transactions on L2)
-  CERC_L1_ACCOUNTS_CSV_URL=
-
-  # OR
-  # Specify the required account credentials
-  CERC_L1_ADDRESS=
-  CERC_L1_PRIV_KEY=
-  CERC_L1_ADDRESS_2=
-  CERC_L1_PRIV_KEY_2=
-  ```
-
-* NOTE: If L1 is running on the host machine, use `host.docker.internal` as the hostname to access the host port
-
-Deploy the stack:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism --env-file <PATH_TO_ENV_FILE> up
-```
-
-The `fixturenet-optimism-contracts` service may take a while (`~15 mins`) to complete running as it:
-1. waits for the 'Merge' to happen on L1
-2. waits for a finalized block to exist on L1 (so that it can be taken as a starting block for roll ups)
-3. deploys the L1 contracts
-
-To list down and monitor the running containers:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism ps
-
-# With status
-docker ps
-
-# Check logs for a container
-docker logs -f <CONTAINER_ID>
-```
-
-## Clean up
-
-Stop all services running in the background:
-
-```bash
-laconic-so --stack fixturenet-optimism deploy --include fixturenet-optimism down 30
-```
-
-Clear volumes created by this stack:
-
-```bash
-# List all relevant volumes
-docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data"
-
-# Remove all the listed volumes
-docker volume rm $(docker volume ls -q --filter "name=.*l1_deployment|.*l2_accounts|.*l2_config|.*l2_geth_data")
-```
-
-## Troubleshooting
-
-See [Troubleshooting](./README.md#troubleshooting)
--- a/docs/CONTRIBUTING.md
+++ b/docs/CONTRIBUTING.md
@ -26,7 +26,7 @@ In addition to the pre-requisites listed in the [README](/README.md), the follow

 1. Clone this repository:
   ```
-   $ git clone https://github.com/cerc-io/stack-orchestrator.git
+   $ git clone https://git.vdb.to/cerc-io/stack-orchestrator.git
   ```

 2. Enter the project directory:
--- a/docs/adding-a-new-stack.md
+++ b/docs/adding-a-new-stack.md
@ -1,14 +1,14 @@
 # Adding a new stack

-See [this PR](https://github.com/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://github.com/cerc-io/stack-orchestrator/pull/435) is another good example.
+See [this PR](https://git.vdb.to/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://git.vdb.to/cerc-io/stack-orchestrator/pull/435) is another good example.

 For external developers, we recommend forking this repo and adding your stack directly to your fork. This initially requires running in "developer mode" as described [here](/docs/CONTRIBUTING.md). Check out the [Namada stack](https://github.com/vknowable/stack-orchestrator/blob/main/app/data/stacks/public-namada/digitalocean_quickstart.md) from Knowable to see how that is done.

-Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://github.com/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
+Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.

 ## Example

- in `app/data/stacks/my-new-stack/stack.yml` add:
+- in `stack_orchestrator/data/stacks/my-new-stack/stack.yml` add:

 ```yaml
 version: "0.1"
@ -21,7 +21,7 @@ pods:
  - my-new-stack
 ```

- in `app/data/container-build/cerc-my-new-stack/build.sh` add:
+- in `stack_orchestrator/data/container-build/cerc-my-new-stack/build.sh` add:

 ```yaml
 #!/usr/bin/env bash
@ -30,7 +30,7 @@ source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 docker build -t cerc/my-new-stack:local -f ${CERC_REPO_BASE_DIR}/my-new-stack/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/my-new-stack
 ```

- in `app/data/compose/docker-compose-my-new-stack.yml` add:
+- in `stack_orchestrator/data/compose/docker-compose-my-new-stack.yml` add:

 ```yaml
 version: "3.2"
@ -43,20 +43,20 @@ services:
      - "0.0.0.0:3000:3000"
 ```

- in `app/data/repository-list.txt` add:
+- in `stack_orchestrator/data/repository-list.txt` add:

 ```bash
 github.com/my-org/my-new-stack
 ```
 whereby that repository contains your source code and a `Dockerfile`, and matches the `repos:` field in the `stack.yml`.

- in `app/data/container-image-list.txt` add:
+- in `stack_orchestrator/data/container-image-list.txt` add:

 ```bash
 cerc/my-new-stack
 ```

- in `app/data/pod-list.txt` add:
+- in `stack_orchestrator/data/pod-list.txt` add:

 ```bash
 my-new-stack
--- a/docs/laconicd-with-console.md
+++ b/docs/laconicd-with-console.md
@ -2,10 +2,10 @@

 The following tutorial explains the steps to run a laconicd fixturenet with CLI and web console that displays records in the registry. It is designed as an introduction to Stack Orchestrator and to showcase one component of the Laconic Stack. Prior to Stack Orchestrator, the following 4 repositories had to be cloned and setup manually:

- https://github.com/cerc-io/laconicd
- https://github.com/cerc-io/laconic-sdk
- https://github.com/cerc-io/laconic-registry-cli
- https://github.com/cerc-io/laconic-console
+- https://git.vdb.to/cerc-io/laconicd
+- https://git.vdb.to/cerc-io/laconic-sdk
+- https://git.vdb.to/cerc-io/laconic-registry-cli
+- https://git.vdb.to/cerc-io/laconic-console

 Now, with Stack Orchestrator, it is a few quick commands. Additionally, the `docker` and `docker compose` integration on the back-end allows the stack to easily persist, facilitating workflows.

@ -52,7 +52,7 @@ laconic-so version
 1. Get the repositories

 ```
-laconic-so --stack fixturenet-laconic-loaded setup-repositories --include github.com/cerc-io/laconicd,github.com/cerc-io/laconic-sdk,github.com/cerc-io/laconic-registry-cli,github.com/cerc-io/laconic-console
+laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
 ```

 2. Set this environment variable to the Laconic self-hosted Gitea instance:
@ -212,7 +212,7 @@ record:

 3. Try out additional CLI commands

- these are documented [here](https://github.com/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
+- these are documented [here](https://git.vdb.to/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
 - e.g,:

 ```
--- a/docs/spec.md
+++ b/docs/spec.md
@ -1,6 +1,6 @@
 # Specification

-Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://github.com/cerc-io/stack-orchestrator/issues/315).
+Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://git.vdb.to/cerc-io/stack-orchestrator/issues/315).

 ## Implementation

--- a/docs/webapp.md
+++ b/docs/webapp.md
@ -0,0 +1,64 @@
+### Building and Running Webapps
+
+It is possible to build and run Next.js webapps using the `build-webapp` and `run-webapp` subcommands.
+
+To make it easier to build once and deploy into different environments and with different configuration,
+compilation and static page generation are separated in the `build-webapp` and `run-webapp` steps.
+
+This offers much more flexibilty than standard Next.js build methods, since any environment variables accessed
+via `process.env`, whether for pages or for API, will have values drawn from their runtime deployment environment,
+not their build environment. 
+
+## Building
+
+Building usually requires no additional configuration.  By default, the Next.js version specified in `package.json`
+is used, and either `yarn` or `npm` will be used automatically depending on which lock files are present.  These
+can be overidden with the build arguments `CERC_NEXT_VERSION` and `CERC_BUILD_TOOL` respectively.  For example: `--extra-build-args "--build-arg CERC_NEXT_VERSION=13.4.12"`
+
+**Example**:
+```
+$ cd ~/cerc
+$ git clone git@git.vdb.to:cerc-io/test-progressive-web-app.git
+$ laconic-so build-webapp --source-repo ~/cerc/test-progressive-web-app
+...
+
+Built host container for ~/cerc/test-progressive-web-app with tag:
+
+    cerc/test-progressive-web-app:local
+
+To test locally run:
+
+    laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment.env
+
+```
+
+## Running
+
+With `run-webapp` a new container will be launched on the local machine, with runtime configuration provided by `--env-file` (if specified) and published on an available port.  Multiple instances can be launched with different configuration.
+
+**Example**:
+```
+# Production env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/production.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 4c6e893bf436b3e91a2b92ce37e30e499685131705700bd92a90d2eb14eefd05
+URL: http://localhost:32768
+
+# Dev env
+$ laconic-so run-webapp --image cerc/test-progressive-web-app:local --env-file /path/to/environment/dev.env
+
+Image: cerc/test-progressive-web-app:local
+ID: 9ab96494f563aafb6c057d88df58f9eca81b90f8721a4e068493a289a976051c
+URL: http://localhost:32769
+```
+
+## Deploying
+
+Use the subcommand `deploy-webapp create` to make a deployment directory that can be subsequently deployed to a Kubernetes cluster.
+Example commands are shown below, assuming that the webapp container image `cerc/test-progressive-web-app:local` has already been built:
+```
+$ laconic-so deploy-webapp create --kube-config ~/kubectl/k8s-kubeconfig.yaml --image-registry registry.digitalocean.com/laconic-registry --deployment-dir webapp-k8s-deployment --image cerc/test-progressive-web-app:local --url https://test-pwa-app.hosting.laconic.com/ --env-file test-webapp.env
+$ laconic-so deployment --dir webapp-k8s-deployment push-images
+$ laconic-so deployment --dir webapp-k8s-deployment start
+```
--- a/requirements.txt
+++ b/requirements.txt
@ -1,4 +1,5 @@
 python-decouple>=3.8
+python-dotenv==1.0.0
 GitPython>=3.1.32
 tqdm>=4.65.0
 python-on-whales>=0.64.0
@ -8,3 +9,5 @@ ruamel.yaml>=0.17.32
 pydantic==1.10.9
 tomli==2.0.1
 validators==0.22.0
+kubernetes>=28.1.0
+humanfriendly>=10.0
--- a/scripts/cloud-init-dev-mode-install.yaml
+++ b/scripts/cloud-init-dev-mode-install.yaml
@ -41,4 +41,4 @@ runcmd:
  - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
  - systemctl enable docker
  - systemctl start docker
-  - git clone https://github.com/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator
+  - git clone https://git.vdb.to/cerc-io/stack-orchestrator.git /home/ubuntu/stack-orchestrator
--- a/scripts/cloud-init-user-mode-install.yaml
+++ b/scripts/cloud-init-user-mode-install.yaml
@ -31,5 +31,5 @@ runcmd:
  - apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
  - systemctl enable docker
  - systemctl start docker
-  - curl -L -o /usr/local/bin/laconic-so https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+  - curl -L -o /usr/local/bin/laconic-so https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
  - chmod +x /usr/local/bin/laconic-so
--- a/scripts/create_build_tag_file.sh
+++ b/scripts/create_build_tag_file.sh
@ -1,6 +1,6 @@
-build_tag_file_name=./app/data/build_tag.txt
+build_tag_file_name=./stack_orchestrator/data/build_tag.txt
 echo "# This file should be re-generated running: scripts/create_build_tag_file.sh script" > $build_tag_file_name
-product_version_string=$( tail -1 ./app/data/version.txt )
+product_version_string=$( tail -1 ./stack_orchestrator/data/version.txt )
 commit_string=$( git rev-parse --short HEAD )
 timestamp_string=$(date +'%Y%m%d%H%M')
 build_tag_string=${product_version_string}-${commit_string}-${timestamp_string}
--- a/scripts/quick-deploy-test.sh
+++ b/scripts/quick-deploy-test.sh
@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+# Beginnings of a script to quickly spin up and test a deployment
+if [[ -n "$CERC_SCRIPT_DEBUG" ]]; then
+    set -x
+fi
+if [[ -n "$1" ]]; then
+	stack_name=$1
+else
+	stack_name="test"
+fi
+spec_file_name="${stack_name}-spec.yml"
+deployment_dir_name="${stack_name}-deployment"
+rm -f ${spec_file_name}
+rm -rf ${deployment_dir_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose init --output ${spec_file_name}
+laconic-so --stack ${stack_name} deploy --deploy-to compose create --deployment-dir ${deployment_dir_name} --spec-file ${spec_file_name}
+#laconic-so deployment --dir ${deployment_dir_name} start
+#laconic-so deployment --dir ${deployment_dir_name} ps
+#laconic-so deployment --dir ${deployment_dir_name} stop
--- a/scripts/quick-install-linux.sh
+++ b/scripts/quick-install-linux.sh
@ -137,7 +137,7 @@ fi
 echo "**************************************************************************************"
 echo "Installing laconic-so"
 # install latest `laconic-so`
-distribution_url=https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+distribution_url=https://git.vdb.to/cerc-io/stack-orchestrator/releases/download/latest/laconic-so
 install_filename=${install_dir}/laconic-so
 mkdir -p  ${install_dir}
 curl -L -o ${install_filename} ${distribution_url}
--- a/setup.py
+++ b/setup.py
@ -13,8 +13,8 @@ setup(
    description='Orchestrates deployment of the Laconic stack',
    long_description=long_description,
    long_description_content_type="text/markdown",
-    url='https://github.com/cerc-io/stack-orchestrator',
-    py_modules=['cli', 'app'],
+    url='https://git.vdb.to/cerc-io/stack-orchestrator',
+    py_modules=['stack_orchestrator'],
    packages=find_packages(),
    install_requires=[requirements],
    python_requires='>=3.7',
@ -25,6 +25,6 @@ setup(
        "Operating System :: OS Independent",
    ],
    entry_points={
-        'console_scripts': ['laconic-so=cli:cli'],
+        'console_scripts': ['laconic-so=stack_orchestrator.main:cli'],
    }
 )
--- a/stack_orchestrator/init.py
+++ b/stack_orchestrator/init.py
--- a/stack_orchestrator/main.py
+++ b/stack_orchestrator/main.py
--- a/stack_orchestrator/base.py
+++ b/stack_orchestrator/base.py
@ -15,7 +15,7 @@

 import os
 from abc import ABC, abstractmethod
-from app.deploy import get_stack_status
+from stack_orchestrator.deploy.deploy import get_stack_status
 from decouple import config


--- a/stack_orchestrator/build/init.py
+++ b/stack_orchestrator/build/init.py
--- a/stack_orchestrator/build/build_containers.py
+++ b/stack_orchestrator/build/build_containers.py
@ -0,0 +1,190 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds or pulls containers for the system components
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+import sys
+from decouple import config
+import subprocess
+import click
+import importlib.resources
+from pathlib import Path
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config, stack_is_external, warn_exit
+from stack_orchestrator.base import get_npm_registry_url
+
+# TODO: find a place for this
+#    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
+
+
+def make_container_build_env(dev_root_path: str,
+                             container_build_dir: str,
+                             debug: bool,
+                             force_rebuild: bool,
+                             extra_build_args: str):
+    container_build_env = {
+        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
+        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
+        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
+        "CERC_REPO_BASE_DIR": dev_root_path,
+        "CERC_CONTAINER_BASE_DIR": container_build_dir,
+        "CERC_HOST_UID": f"{os.getuid()}",
+        "CERC_HOST_GID": f"{os.getgid()}",
+        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
+    }
+    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
+    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
+    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
+    docker_host_env = os.getenv("DOCKER_HOST")
+    if docker_host_env:
+        container_build_env.update({"DOCKER_HOST": docker_host_env})
+
+    return container_build_env
+
+
+def process_container(stack: str,
+                      container,
+                      container_build_dir: str,
+                      container_build_env: dict,
+                      dev_root_path: str,
+                      quiet: bool,
+                      verbose: bool,
+                      dry_run: bool,
+                      continue_on_error: bool,
+                      ):
+    if not quiet:
+        print(f"Building: {container}")
+
+    default_container_tag = f"{container}:local"
+    container_build_env.update({"CERC_DEFAULT_CONTAINER_IMAGE_TAG": default_container_tag})
+
+    # Check if this is in an external stack
+    if stack_is_external(stack):
+        container_parent_dir = Path(stack).joinpath("container-build")
+        temp_build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+        temp_build_script_filename = temp_build_dir.joinpath("build.sh")
+        # Now check if the container exists in the external stack.
+        if not temp_build_script_filename.exists():
+            # If not, revert to building an internal container
+            container_parent_dir = container_build_dir
+    else:
+        container_parent_dir = container_build_dir
+
+    build_dir = container_parent_dir.joinpath(container.replace("/", "-"))
+    build_script_filename = build_dir.joinpath("build.sh")
+
+    if verbose:
+        print(f"Build script filename: {build_script_filename}")
+    if os.path.exists(build_script_filename):
+        build_command = build_script_filename.as_posix()
+    else:
+        if verbose:
+            print(f"No script file found: {build_script_filename}, using default build script")
+        repo_dir = container.split('/')[1]
+        # TODO: make this less of a hack -- should be specified in some metadata somewhere
+        # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
+        repo_full_path = os.path.join(dev_root_path, repo_dir)
+        repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
+        build_command = os.path.join(container_build_dir,
+                                     "default-build.sh") + f" {default_container_tag} {repo_dir_or_build_dir}"
+    if not dry_run:
+        # No PATH at all causes failures with podman.
+        if "PATH" not in container_build_env:
+            container_build_env["PATH"] = os.environ["PATH"]
+        if verbose:
+            print(f"Executing: {build_command} with environment: {container_build_env}")
+        build_result = subprocess.run(build_command, shell=True, env=container_build_env)
+        if verbose:
+            print(f"Return code is: {build_result.returncode}")
+        if build_result.returncode != 0:
+            print(f"Error running build for {container}")
+            if not continue_on_error:
+                print("FATAL Error: container build failed and --continue-on-error not set, exiting")
+                sys.exit(1)
+            else:
+                print("****** Container Build Error, continuing because --continue-on-error is set")
+    else:
+        print("Skipped")
+
+
+@click.command()
+@click.option('--include', help="only build these containers")
+@click.option('--exclude', help="don\'t build these containers")
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.pass_context
+def command(ctx, include, exclude, force_rebuild, extra_build_args):
+    '''build the set of containers required for a complete stack'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not os.path.isdir(dev_root_path):
+        print('Dev root directory doesn\'t exist, creating')
+
+    # See: https://stackoverflow.com/a/20885799/1701505
+    from stack_orchestrator import data
+    with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
+        all_containers = container_list_file.read().splitlines()
+
+    containers_in_scope = []
+    if stack:
+        stack_config = get_parsed_stack_config(stack)
+        if "containers" not in stack_config or stack_config["containers"] is None:
+            warn_exit(f"stack {stack} does not define any containers")
+        containers_in_scope = stack_config['containers']
+    else:
+        containers_in_scope = all_containers
+
+    if verbose:
+        print(f'Containers: {containers_in_scope}')
+        if stack:
+            print(f"Stack: {stack}")
+
+    container_build_env = make_container_build_env(dev_root_path,
+                                                   container_build_dir,
+                                                   debug,
+                                                   force_rebuild,
+                                                   extra_build_args)
+
+    for container in containers_in_scope:
+        if include_exclude_check(container, include, exclude):
+            process_container(stack, container, container_build_dir, container_build_env,
+                              dev_root_path, quiet, verbose, dry_run, continue_on_error)
+        else:
+            if verbose:
+                print(f"Excluding: {container}")
--- a/stack_orchestrator/build/build_npms.py
+++ b/stack_orchestrator/build/build_npms.py
@ -25,8 +25,8 @@ from decouple import config
 import click
 import importlib.resources
 from python_on_whales import docker, DockerException
-from app.base import get_stack
-from app.util import include_exclude_check, get_parsed_stack_config
+from stack_orchestrator.base import get_stack
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config

 builder_js_image_name = "cerc/builder-js:local"

@ -83,7 +83,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
        os.makedirs(build_root_path)

    # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
+    from stack_orchestrator import data
    with importlib.resources.open_text(data, "npm-package-list.txt") as package_list_file:
        all_packages = package_list_file.read().splitlines()

--- a/stack_orchestrator/build/build_webapp.py
+++ b/stack_orchestrator/build/build_webapp.py
@ -0,0 +1,84 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds webapp containers
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+from decouple import config
+import click
+from pathlib import Path
+from stack_orchestrator.build import build_containers
+from stack_orchestrator.deploy.webapp.util import determine_base_container
+
+
+@click.command()
+@click.option('--base-container')
+@click.option('--source-repo', help="directory containing the webapp to build", required=True)
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.option("--tag", help="Container tag (default: cerc/<app_name>:local)")
+@click.pass_context
+def command(ctx, base_container, source_repo, force_rebuild, extra_build_args, tag):
+    '''build the specified webapp container'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    if not base_container:
+        base_container = determine_base_container(source_repo)
+
+    # First build the base container.
+    container_build_env = build_containers.make_container_build_env(dev_root_path, container_build_dir, debug,
+                                                                    force_rebuild, extra_build_args)
+
+    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)
+
+    # Now build the target webapp.  We use the same build script, but with a different Dockerfile and work dir.
+    container_build_env["CERC_WEBAPP_BUILD_RUNNING"] = "true"
+    container_build_env["CERC_CONTAINER_BUILD_WORK_DIR"] = os.path.abspath(source_repo)
+    container_build_env["CERC_CONTAINER_BUILD_DOCKERFILE"] = os.path.join(container_build_dir,
+                                                                          base_container.replace("/", "-"),
+                                                                          "Dockerfile.webapp")
+    if not tag:
+        webapp_name = os.path.abspath(source_repo).split(os.path.sep)[-1]
+        container_build_env["CERC_CONTAINER_BUILD_TAG"] = f"cerc/{webapp_name}:local"
+    else:
+        container_build_env["CERC_CONTAINER_BUILD_TAG"] = tag
+
+    build_containers.process_container(None, base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)
--- a/stack_orchestrator/command_types.py
+++ b/stack_orchestrator/command_types.py
--- a/stack_orchestrator/constants.py
+++ b/stack_orchestrator/constants.py
@ -0,0 +1,38 @@
+# Copyright © 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+cluster_name_prefix = "laconic-"
+stack_file_name = "stack.yml"
+spec_file_name = "spec.yml"
+config_file_name = "config.env"
+deployment_file_name = "deployment.yml"
+compose_dir_name = "compose"
+compose_deploy_type = "compose"
+k8s_kind_deploy_type = "k8s-kind"
+k8s_deploy_type = "k8s"
+cluster_id_key = "cluster-id"
+kube_config_key = "kube-config"
+deploy_to_key = "deploy-to"
+network_key = "network"
+http_proxy_key = "http-proxy"
+image_registry_key = "image-registry"
+configmaps_key = "configmaps"
+resources_key = "resources"
+volumes_key = "volumes"
+security_key = "security"
+annotations_key = "annotations"
+labels_key = "labels"
+kind_config_filename = "kind-config.yml"
+kube_config_filename = "kubeconfig.yml"
--- a/app/data/stacks/chain-chunker/README.md
+++ b/app/data/stacks/chain-chunker/README.md
--- a/stack_orchestrator/data/compose/docker-compose-container-registry.yml
+++ b/stack_orchestrator/data/compose/docker-compose-container-registry.yml
@ -0,0 +1,13 @@
+services:
+  registry:
+    image: registry:2.8
+    restart: always
+    environment:
+      REGISTRY_LOG_LEVEL: ${REGISTRY_LOG_LEVEL}
+    volumes:
+      - registry-data:/var/lib/registry
+    ports:
+      - "5000"
+
+volumes:
+  registry-data:
--- a/stack_orchestrator/data/compose/docker-compose-contract-sushiswap.yml
+++ b/stack_orchestrator/data/compose/docker-compose-contract-sushiswap.yml
--- a/stack_orchestrator/data/compose/docker-compose-contract.yml
+++ b/stack_orchestrator/data/compose/docker-compose-contract.yml
--- a/stack_orchestrator/data/compose/docker-compose-eth-probe.yml
+++ b/stack_orchestrator/data/compose/docker-compose-eth-probe.yml
--- a/stack_orchestrator/data/compose/docker-compose-eth-statediff-fill-service.yml
+++ b/stack_orchestrator/data/compose/docker-compose-eth-statediff-fill-service.yml
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-eth-metrics.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-eth-metrics.yml
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-eth.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-eth.yml
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-laconic-console.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-laconic-console.yml
@ -4,6 +4,6 @@ services:
    image: cerc/laconic-console-host:local
    environment:
      - CERC_WEBAPP_FILES_DIR=${CERC_WEBAPP_FILES_DIR:-/usr/local/share/.config/yarn/global/node_modules/@cerc-io/console-app/dist/production}
-      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost}
+      - LACONIC_HOSTED_ENDPOINT=${LACONIC_HOSTED_ENDPOINT:-http://localhost:9473}
    ports:
      - "80"
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-laconicd.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-laconicd.yml
@ -5,7 +5,7 @@ services:
    command: ["sh", "/docker-entrypoint-scripts.d/create-fixturenet.sh"]
    volumes:
      # The cosmos-sdk node's database directory:
-      - laconicd-data:/root/.laconicd/data
+      - laconicd-data:/root/.laconicd
      # TODO: look at folding these scripts into the container
      - ../config/fixturenet-laconicd/create-fixturenet.sh:/docker-entrypoint-scripts.d/create-fixturenet.sh
      - ../config/fixturenet-laconicd/export-mykey.sh:/docker-entrypoint-scripts.d/export-mykey.sh
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-lotus.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-lotus.yml
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-optimism.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-optimism.yml
@ -6,8 +6,8 @@ services:
  # Deploys the L1 smart contracts (outputs to volume l1_deployment)
  fixturenet-optimism-contracts:
    restart: on-failure
-    hostname: fixturenet-optimism-contracts
    image: cerc/optimism-contracts:local
+    hostname: fixturenet-optimism-contracts
    env_file:
      - ../config/fixturenet-optimism/l1-params.env
    environment:
@ -17,27 +17,49 @@ services:
      CERC_L1_ACCOUNTS_CSV_URL: ${CERC_L1_ACCOUNTS_CSV_URL}
      CERC_L1_ADDRESS: ${CERC_L1_ADDRESS}
      CERC_L1_PRIV_KEY: ${CERC_L1_PRIV_KEY}
-      CERC_L1_ADDRESS_2: ${CERC_L1_ADDRESS_2}
-      CERC_L1_PRIV_KEY_2: ${CERC_L1_PRIV_KEY_2}
-    # Waits for L1 endpoint to be up before running the script
-    command: |
-      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./run.sh"
    volumes:
      - ../config/network/wait-for-it.sh:/app/packages/contracts-bedrock/wait-for-it.sh
-      - ../config/optimism-contracts/hardhat-tasks/verify-contract-deployment.ts:/app/packages/contracts-bedrock/tasks/verify-contract-deployment.ts
-      - ../config/optimism-contracts/hardhat-tasks/rekey-json.ts:/app/packages/contracts-bedrock/tasks/rekey-json.ts
-      - ../config/optimism-contracts/hardhat-tasks/send-balance.ts:/app/packages/contracts-bedrock/tasks/send-balance.ts
-      - ../config/fixturenet-optimism/optimism-contracts/update-config.js:/app/packages/contracts-bedrock/update-config.js
-      - ../config/fixturenet-optimism/optimism-contracts/run.sh:/app/packages/contracts-bedrock/run.sh
+      - ../config/fixturenet-optimism/optimism-contracts/deploy-contracts.sh:/app/packages/contracts-bedrock/deploy-contracts.sh
      - l2_accounts:/l2-accounts
-      - l1_deployment:/app/packages/contracts-bedrock
+      - l1_deployment:/l1-deployment
+      - l2_config:/l2-config
+    # Waits for L1 endpoint to be up before running the contract deploy script
+    command: |
+      "./wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- ./deploy-contracts.sh"
+
+  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
+  op-geth:
+    restart: always
+    image: cerc/optimism-l2geth:local
+    hostname: op-geth
+    depends_on:
+      op-node:
+        condition: service_started
+    volumes:
+      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
+      - l2_config:/l2-config:ro
+      - l2_accounts:/l2-accounts:ro
+      - l2_geth_data:/datadir
+    entrypoint: "sh"
+    command: "/run-op-geth.sh"
+    ports:
+      - "8545"
+      - "8546"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost:8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 100
+      start_period: 10s
    extra_hosts:
      - "host.docker.internal:host-gateway"

-  # Generates the config files required for L2 (outputs to volume l2_config)
-  op-node-l2-config-gen:
-    restart: on-failure
+  # Runs the L2 consensus client (Sequencer node)
+  # Generates the L2 config files if not already present (outputs to volume l2_config)
+  op-node:
+    restart: always
    image: cerc/optimism-op-node:local
+    hostname: op-node
    depends_on:
      fixturenet-optimism-contracts:
        condition: service_completed_successfully
@ -47,61 +69,19 @@ services:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
      CERC_L1_RPC: ${CERC_L1_RPC}
    volumes:
-      - ../config/fixturenet-optimism/generate-l2-config.sh:/app/generate-l2-config.sh
-      - l1_deployment:/contracts-bedrock:ro
-      - l2_config:/app
-    command: ["sh", "/app/generate-l2-config.sh"]
-    extra_hosts:
-      - "host.docker.internal:host-gateway"
-
-  # Initializes and runs the L2 execution client  (outputs to volume l2_geth_data)
-  op-geth:
-    restart: always
-    image: cerc/optimism-l2geth:local
-    depends_on:
-      op-node-l2-config-gen:
-        condition: service_started
-    volumes:
-      - ../config/fixturenet-optimism/run-op-geth.sh:/run-op-geth.sh
-      - l2_config:/op-node:ro
+      - ../config/fixturenet-optimism/run-op-node.sh:/run-op-node.sh
+      - l1_deployment:/l1-deployment:ro
+      - l2_config:/l2-config
      - l2_accounts:/l2-accounts:ro
-      - l2_geth_data:/datadir
    entrypoint: "sh"
-    command: "/run-op-geth.sh"
+    command: "/run-op-node.sh"
    ports:
-      - "0.0.0.0:8545:8545"
-      - "0.0.0.0:8546:8546"
-    healthcheck:
-      test: ["CMD", "nc", "-vz", "localhost:8545"]
-      interval: 30s
-      timeout: 10s
-      retries: 10
-      start_period: 10s
-
-  # Runs the L2 consensus client (Sequencer node)
-  op-node:
-    restart: always
-    image: cerc/optimism-op-node:local
-    depends_on:
-      op-geth:
-        condition: service_healthy
-    env_file:
-      - ../config/fixturenet-optimism/l1-params.env
-    environment:
-      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
-      CERC_L1_RPC: ${CERC_L1_RPC}
-    volumes:
-      - ../config/fixturenet-optimism/run-op-node.sh:/app/run-op-node.sh
-      - l2_config:/op-node-data:ro
-      - l2_accounts:/l2-accounts:ro
-    command: ["sh", "/app/run-op-node.sh"]
-    ports:
-      - "0.0.0.0:8547:8547"
+      - "8547"
    healthcheck:
      test: ["CMD", "nc", "-vz", "localhost:8547"]
      interval: 30s
      timeout: 10s
-      retries: 10
+      retries: 100
      start_period: 10s
    extra_hosts:
      - "host.docker.internal:host-gateway"
@ -110,6 +90,7 @@ services:
  op-batcher:
    restart: always
    image: cerc/optimism-op-batcher:local
+    hostname: op-batcher
    depends_on:
      op-node:
        condition: service_healthy
@ -129,7 +110,7 @@ services:
    command: |
      "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-batcher.sh"
    ports:
-      - "127.0.0.1:8548:8548"
+      - "8548"
    extra_hosts:
      - "host.docker.internal:host-gateway"

@ -137,25 +118,29 @@ services:
  op-proposer:
    restart: always
    image: cerc/optimism-op-proposer:local
+    hostname: op-proposer
    depends_on:
      op-node:
        condition: service_healthy
+      op-geth:
+        condition: service_healthy
    env_file:
      - ../config/fixturenet-optimism/l1-params.env
    environment:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
      CERC_L1_RPC: ${CERC_L1_RPC}
+      CERC_L1_CHAIN_ID: ${CERC_L1_CHAIN_ID}
    volumes:
      - ../config/network/wait-for-it.sh:/wait-for-it.sh
      - ../config/fixturenet-optimism/run-op-proposer.sh:/run-op-proposer.sh
-      - l1_deployment:/contracts-bedrock:ro
+      - l1_deployment:/l1-deployment:ro
      - l2_accounts:/l2-accounts:ro
    entrypoint: ["sh", "-c"]
    # Waits for L1 endpoint to be up before running the proposer
    command: |
      "/wait-for-it.sh -h ${CERC_L1_HOST:-$${DEFAULT_CERC_L1_HOST}} -p ${CERC_L1_PORT:-$${DEFAULT_CERC_L1_PORT}} -s -t 60 -- /run-op-proposer.sh"
    ports:
-      - "127.0.0.1:8560:8560"
+      - "8560"
    extra_hosts:
      - "host.docker.internal:host-gateway"

--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-plugeth.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-plugeth.yml
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-pocket.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-pocket.yml
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-sushiswap-subgraph-v3.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-sushiswap-subgraph-v3.yml
--- a/stack_orchestrator/data/compose/docker-compose-fixturenet-urbit.yml
+++ b/stack_orchestrator/data/compose/docker-compose-fixturenet-urbit.yml
@ -0,0 +1,36 @@
+version: '3.7'
+
+services:
+  # Runs an Urbit fake ship and attempts an app installation using given data
+  # Uploads the app glob to given IPFS endpoint
+  # From urbit_app_builds volume:
+  # - takes app build from ${CERC_URBIT_APP}/build (waits for it to appear)
+  # - takes additional mark files from ${CERC_URBIT_APP}/mar
+  # - takes the docket file from ${CERC_URBIT_APP}/desk.docket-0
+  urbit-fake-ship:
+    restart: unless-stopped
+    image: tloncorp/vere
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_URBIT_APP: ${CERC_URBIT_APP}
+      CERC_ENABLE_APP_INSTALL: ${CERC_ENABLE_APP_INSTALL:-true}
+      CERC_IPFS_GLOB_HOST_ENDPOINT: ${CERC_IPFS_GLOB_HOST_ENDPOINT:-http://ipfs:5001}
+      CERC_IPFS_SERVER_ENDPOINT: ${CERC_IPFS_SERVER_ENDPOINT:-http://ipfs:8080}
+    entrypoint: ["bash", "-c", "./run-urbit-ship.sh && ./deploy-app.sh && tail -f /dev/null"]
+    volumes:
+      - urbit_data:/urbit
+      - urbit_app_builds:/app-builds
+      - ../config/urbit/run-urbit-ship.sh:/urbit/run-urbit-ship.sh
+      - ../config/urbit/deploy-app.sh:/urbit/deploy-app.sh
+    ports:
+      - "80"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "80"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+
+volumes:
+  urbit_data:
+  urbit_app_builds:
--- a/stack_orchestrator/data/compose/docker-compose-foundry.yml
+++ b/stack_orchestrator/data/compose/docker-compose-foundry.yml
--- a/stack_orchestrator/data/compose/docker-compose-go-ethereum-foundry.yml
+++ b/stack_orchestrator/data/compose/docker-compose-go-ethereum-foundry.yml
--- a/stack_orchestrator/data/compose/docker-compose-go-nitro.yml
+++ b/stack_orchestrator/data/compose/docker-compose-go-nitro.yml
--- a/stack_orchestrator/data/compose/docker-compose-grafana.yml
+++ b/stack_orchestrator/data/compose/docker-compose-grafana.yml
@ -0,0 +1,23 @@
+version: "3.7"
+
+services:
+  grafana:
+    image: grafana/grafana:10.2.2
+    restart: always
+    environment:
+      GF_SERVER_ROOT_URL: ${GF_SERVER_ROOT_URL}
+    volumes:
+      - ../config/monitoring/grafana/provisioning:/etc/grafana/provisioning
+      - ../config/monitoring/grafana/dashboards:/etc/grafana/dashboards
+      - grafana_storage:/var/lib/grafana
+    ports:
+      - "3000"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "3000"]
+      interval: 30s
+      timeout: 5s
+      retries: 10
+      start_period: 3s
+
+volumes:
+  grafana_storage:
--- a/stack_orchestrator/data/compose/docker-compose-graph-node.yml
+++ b/stack_orchestrator/data/compose/docker-compose-graph-node.yml
--- a/stack_orchestrator/data/compose/docker-compose-ipld-eth-beacon-db.yml
+++ b/stack_orchestrator/data/compose/docker-compose-ipld-eth-beacon-db.yml
--- a/stack_orchestrator/data/compose/docker-compose-ipld-eth-beacon-indexer.yml
+++ b/stack_orchestrator/data/compose/docker-compose-ipld-eth-beacon-indexer.yml
--- a/stack_orchestrator/data/compose/docker-compose-ipld-eth-db.yml
+++ b/stack_orchestrator/data/compose/docker-compose-ipld-eth-db.yml
--- a/stack_orchestrator/data/compose/docker-compose-ipld-eth-server-payments.yml
+++ b/stack_orchestrator/data/compose/docker-compose-ipld-eth-server-payments.yml
--- a/stack_orchestrator/data/compose/docker-compose-ipld-eth-server.yml
+++ b/stack_orchestrator/data/compose/docker-compose-ipld-eth-server.yml
--- a/stack_orchestrator/data/compose/docker-compose-keycloak.yml
+++ b/stack_orchestrator/data/compose/docker-compose-keycloak.yml
--- a/stack_orchestrator/data/compose/docker-compose-kubo.yml
+++ b/stack_orchestrator/data/compose/docker-compose-kubo.yml
@ -0,0 +1,24 @@
+version: "3.2"
+
+# See: https://docs.ipfs.tech/install/run-ipfs-inside-docker/#set-up
+services:
+  ipfs:
+    image: ipfs/kubo:v0.24.0
+    restart: always
+    volumes:
+      - ipfs-import:/import
+      - ipfs-data:/data/ipfs
+    ports:
+      - "4001"
+      - "8080"
+      - "0.0.0.0:5001:5001"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5001"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+
+volumes:
+  ipfs-import:
+  ipfs-data:
--- a/stack_orchestrator/data/compose/docker-compose-laconic-dot-com.yml
+++ b/stack_orchestrator/data/compose/docker-compose-laconic-dot-com.yml
--- a/stack_orchestrator/data/compose/docker-compose-laconicd.yml
+++ b/stack_orchestrator/data/compose/docker-compose-laconicd.yml
--- a/stack_orchestrator/data/compose/docker-compose-lasso.yml
+++ b/stack_orchestrator/data/compose/docker-compose-lasso.yml
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-eth-api-proxy.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-eth-api-proxy.yml
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-eth-ipld-eth-db.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-eth-ipld-eth-db.yml
@ -0,0 +1,29 @@
+version: "3.2"
+
+services:
+  migrations:
+    restart: on-failure
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-db:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+
+  ipld-eth-db:
+    image: timescale/timescaledb:2.8.1-pg14
+    restart: always
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+    volumes:
+      - mainnet_eth_ipld_eth_db:/var/lib/postgresql/data
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      - "5432"
+volumes:
+  mainnet_eth_ipld_eth_db:
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-eth-ipld-eth-server.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-eth-ipld-eth-server.yml
@ -0,0 +1,24 @@
+version: "3.7"
+services:
+  ipld-eth-server:
+    restart: always
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-ipld-eth-server/srv.env
+    volumes:
+      - ../config/mainnet-eth-ipld-eth-server/config.toml:/app/config.toml:ro
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40001"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-eth-keycloak.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-eth-keycloak.yml
@ -6,7 +6,7 @@ services:
    env_file:
      - ../config/mainnet-eth-keycloak/keycloak.env
    healthcheck:
-      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      test: ["CMD", "nc", "-v", "localhost", "35432"]
      interval: 30s
      timeout: 10s
      retries: 10
@ -14,7 +14,7 @@ services:
    volumes:
      - mainnet_eth_keycloak_db:/var/lib/postgresql/data
    ports:
-      - 5432
+      - 35432

  keycloak:
    image: cerc/keycloak:local
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-eth-metrics.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-eth-metrics.yml
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-eth-plugeth.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-eth-plugeth.yml
@ -0,0 +1,72 @@
+
+services:
+
+  mainnet-eth-geth-1:
+    restart: always
+    hostname: mainnet-eth-geth-1
+    cap_add:
+      - SYS_PTRACE
+    image: cerc/plugeth-with-plugins:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-geth.sh"
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-plugeth/geth.env
+    volumes:
+      - mainnet_eth_plugeth_geth_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-geth.sh:/opt/run-geth.sh
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      # http api
+      - "8545"
+      # ws api
+      - "8546"
+      # ws el
+      - "8551"
+      # p2p
+      - "30303"
+      - "30303/udp"
+      # debugging
+      - "40000"
+      # metrics
+      - "6060"
+
+  mainnet-eth-lighthouse-1:
+    restart: always
+    hostname: mainnet-eth-lighthouse-1
+    healthcheck:
+      test: ["CMD", "wget", "--tries=1", "--connect-timeout=1", "--quiet", "-O", "-", "http://localhost:5052/eth/v2/beacon/blocks/head"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 30s
+    environment:
+      LIGHTHOUSE_EXECUTION_ENDPOINT: "http://mainnet-eth-geth-1:8551"
+    env_file:
+      - ../config/mainnet-eth-plugeth/lighthouse.env
+    image: cerc/lighthouse:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-lighthouse.sh"
+    volumes:
+      - mainnet_eth_plugeth_lighthouse_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-lighthouse.sh:/opt/run-lighthouse.sh
+    ports:
+      # api
+      - "5052"
+      # metrics
+      - "5054"
+      # p2p
+      - "9000"
+      - "9000/udp"
+
+volumes:
+  mainnet_eth_plugeth_config_data:
+  mainnet_eth_plugeth_geth_1_data:
+  mainnet_eth_plugeth_lighthouse_1_data:
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-eth.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-eth.yml
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-go-opera.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-go-opera.yml
--- a/stack_orchestrator/data/compose/docker-compose-mainnet-laconicd.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mainnet-laconicd.yml
--- a/stack_orchestrator/data/compose/docker-compose-mars-v2.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mars-v2.yml
@ -0,0 +1,12 @@
+version: "3.2"
+
+services:
+  mars:
+    image: cerc/mars-v2:local
+    restart: always
+    ports:
+      - "3000:3000"
+    environment:
+      - URL_OSMOSIS_REST=https://lcd-osmosis.blockapsis.com
+      - URL_OSMOSIS_RPC=https://rpc-osmosis.blockapsis.com
+      - WALLET_CONNECT_ID=0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x
--- a/stack_orchestrator/data/compose/docker-compose-mars.yml
+++ b/stack_orchestrator/data/compose/docker-compose-mars.yml
@ -0,0 +1,20 @@
+version: "3.2"
+
+services:
+  mars:
+    image: cerc/mars:local
+    restart: always
+    ports:
+      - "3000:3000"
+    environment:
+      - URL_OSMOSIS_GQL=https://osmosis-node.marsprotocol.io/GGSFGSFGFG34/osmosis-hive-front/graphql
+      - URL_OSMOSIS_REST=https://lcd-osmosis.blockapsis.com
+      - URL_OSMOSIS_RPC=https://rpc-osmosis.blockapsis.com
+      - URL_NEUTRON_GQL=https://neutron.rpc.p2p.world/qgrnU6PsQZA8F9S5Fb8Fn3tV3kXmMBl2M9bcc9jWLjQy8p/hive/graphql
+      - URL_NEUTRON_REST=https://rest-kralum.neutron-1.neutron.org
+      - URL_NEUTRON_RPC=https://rpc-kralum.neutron-1.neutron.org
+      - URL_NEUTRON_TEST_GQL=https://testnet-neutron-gql.marsprotocol.io/graphql
+      - URL_NEUTRON_TEST_REST=https://rest-palvus.pion-1.ntrn.tech
+      - URL_NEUTRON_TEST_RPC=https://rpc-palvus.pion-1.ntrn.tech
+      - WALLET_CONNECT_ID=0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x0x
+
--- a/Show More
+++ b/Show More
				`@ -0,0 +1 @@`
				`Change this file to trigger running the test-container-registry CI job`
				`@ -0,0 +1,2 @@`
				`Change this file to trigger running the fixturenet-eth-test CI job`