Trigger fixturenet-eth-plugeth-test CI job

Run go-nitro node in process in ipld-eth-server (#575 )
* Setup ipld-eth-server to run in-process Nitro node * Update watcher version in fixturenet-payments stack * Update upstream nitro multiaddr in watcher setup * Change RPC query endpoint to ipld-eth-server * Update Ponder config to pay ipld-eth-server Nitro node * Separate nitro-rpc-client service and update demo.md * Remove unnecessary volumes * Update ipld-eth-server branch * Fix clean up steps --------- Co-authored-by: Nabarun <nabarun@deepstacksoft.com> Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>
2023-10-13 07:38:27 -06:00 · 2023-10-13 15:27:17 +05:30 · 2023-10-12 22:42:05 -06:00 · 2023-10-12 21:53:47 -06:00 · 2023-10-12 20:40:39 -06:00 · 2023-10-12 14:16:44 +05:30
114 changed files with 3647 additions and 1119 deletions
@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Plugeth-Test

 on:
  push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,8 +19,16 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
      - name: "Print Python version"
@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Test

 on:
  push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-test'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,7 +19,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -5,6 +5,8 @@ on:
    branches:
      - main
      - publish-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 jobs:
  publish:
@@ -18,7 +20,15 @@ jobs:
        run: |
          build_tag=$(./scripts/create_build_tag_file.sh)
          echo "build-tag=v${build_tag}" >> $GITHUB_OUTPUT
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -7,6 +7,8 @@ on:
    branches:
      - main
      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -7,6 +7,8 @@ on:
    branches:
      - main
      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'

 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
    steps:
      - name: "Clone project repository"
        uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
        uses: actions/setup-python@v4
        with:
          python-version: '3.8'
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-plugeth-test CI job
+trigger
@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+trigger
@@ -16,6 +16,7 @@ Ensure that the following are already installed:
 - [Python3](https://wiki.python.org/moin/BeginnersGuide/Download): `python3 --version` >= `3.8.10` (the Python3 shipped in Ubuntu 20+ is good to go)
 - [Docker](https://docs.docker.com/get-docker/): `docker --version` >= `20.10.21`
 - [jq](https://stedolan.github.io/jq/download/): `jq --version` >= `1.5`
+- [git](https://git-scm.com/book/en/v2/Getting-Started-Installing-Git): `git --version` >= `2.10.3`

 Note: if installing docker-compose via package manager on Linux (as opposed to Docker Desktop), you must [install the plugin](https://docs.docker.com/compose/install/linux/#install-the-plugin-manually), e.g. :

@@ -48,6 +49,18 @@ Verify operation (your version will probably be different, just check here that
 laconic-so version
 Version: 1.1.0-7a607c2-202304260513
 ```
+Save the distribution url to `~/.laconic-so/config.yml`:
+```bash
+mkdir ~/.laconic-so
+echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml"
+```
+
+### Update
+If Stack Orchestrator was installed using the process described above, it is able to subsequently self-update to the current latest version by running:
+
+```bash
+laconic-so update
+```

 ## Usage

@@ -40,6 +40,7 @@ services:
      - fixturenet-eth-bootnode-geth
    ports:
      - "8545"
+      - "8546"
      - "40000"
      - "6060"

@@ -61,6 +62,9 @@ services:
      - fixturenet-eth-bootnode-geth
    volumes:
      - fixturenet_eth_geth_2_data:/root/ethdata
+    ports:
+      - "8545"
+      - "8546"

  fixturenet-eth-bootnode-lighthouse:
    restart: always
@@ -70,6 +70,7 @@ services:
    command: "/run-op-geth.sh"
    ports:
      - "0.0.0.0:8545:8545"
+      - "0.0.0.0:8546:8546"
    healthcheck:
      test: ["CMD", "nc", "-vz", "localhost:8545"]
      interval: 30s
@@ -20,7 +20,7 @@ services:
      - SYS_PTRACE
    environment:
      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
-      CERC_RUN_STATEDIFF: "detect"
+      CERC_RUN_STATEDIFF: ${CERC_RUN_STATEDIFF:-detect}
      CERC_STATEDIFF_DB_NODE_ID: 1
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
    env_file:
@@ -38,6 +38,7 @@ services:
      - fixturenet-eth-bootnode-geth
    ports:
      - "8545"
+      - "8546"
      - "40000"
      - "6060"

@@ -59,6 +60,9 @@ services:
      - fixturenet-eth-bootnode-geth
    volumes:
      - fixturenet_plugeth_geth_2_data:/root/ethdata
+    ports:
+      - "8545"
+      - "8546"

  fixturenet-eth-bootnode-lighthouse:
    restart: always
@@ -0,0 +1,49 @@
+version: '3.7'
+
+services:
+  go-nitro:
+    image: cerc/go-nitro:local
+    hostname: go-nitro
+    restart: on-failure
+    depends_on:
+      # Wait for Nitro contracts to be deployed
+      nitro-contracts:
+        condition: service_completed_successfully
+    environment:
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      CERC_NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      CERC_NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
+      CERC_NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/data/nitro-store}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/run-nitro-node.sh"]
+    volumes:
+      - go_nitro_data:/app/data
+      - nitro_deployment:/app/deployment
+      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "4005"]
+      interval: 10s
+      timeout: 5s
+      retries: 10
+      start_period: 10s
+    ports:
+      - "3005"
+      - "4005:4005"
+      - "5005:5005"
+
+  nitro-rpc-client:
+      image: cerc/nitro-rpc-client:local
+      hostname: nitro-rpc-client
+      restart: on-failure
+      depends_on:
+        # Wait for the go-nitro node to start
+        go-nitro:
+          condition: service_healthy
+      command: ["bash", "-c", "tail -f /dev/null"]
+
+volumes:
+  go_nitro_data:
+  nitro_deployment:
@@ -6,9 +6,6 @@ services:
        condition: service_healthy
      ipfs:
        condition: service_healthy
-      # Uncomment when running against fixturenet-lotus to wait for the Lotus node to come up
-      # lotus-node-1:
-      #   condition: service_healthy
    extra_hosts:
      - host.docker.internal:host-gateway
    environment:
@@ -18,9 +15,13 @@ services:
      postgres_user: graph-node
      postgres_pass: password
      postgres_db: graph-node
-      ethereum: ${NETWORK:-filecoin}:${ETH_RPC_ENDPOINT:-https://archive.lotus.vdb.to/rpc/v1}
+      ethereum: ${ETH_NETWORKS:-lotus-fixturenet:http://lotus-node-1:1234/rpc/v1}
      GRAPH_LOG: debug
      ETHEREUM_REORG_THRESHOLD: 3
+    entrypoint: ["bash", "-c"]
+    # Wait for ETH RPC endpoint to be up when running with fixturenet-lotus
+    command: |
+      "wait_for ${ETH_RPC_HOST:-lotus-node-1}:${ETH_RPC_PORT:-1234} -t 1800 -- start"
    ports:
      - "8000"
      - "8001"
@@ -5,6 +5,9 @@ services:
    depends_on:
      ipld-eth-db:
        condition: service_healthy
+      # Wait for Nitro contracts to be deployed
+      nitro-contracts:
+        condition: service_completed_successfully
    image: cerc/ipld-eth-server:local
    environment:
      SERVER_HTTP_PATH: 0.0.0.0:8081
@@ -27,18 +30,37 @@ services:
      PROM_HTTP_PORT: "8090"
      LOG_LEVEL: "debug"
      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
+      NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-false}
+      NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/data/nitro-store}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
    volumes:
      - type: bind
        source: ../config/ipld-eth-server/chain.json
        target: /tmp/chain.json
+      - eth_server_nitro_data:/app/data
+      - nitro_deployment:/app/deployment
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
    ports:
      - "8081"
      - "8082"
      - "8090"
      - "40000"
+      - "3005"
+      - "4005:4005"
+      - "5005:5005"
    healthcheck:
      test: ["CMD", "nc", "-v", "localhost", "8081"]
      interval: 20s
      timeout: 5s
      retries: 15
      start_period: 5s
+
+volumes:
+  eth_server_nitro_data:
+  nitro_deployment:
@@ -0,0 +1,45 @@
+version: '3.2'
+
+services:
+  # Builds and serves the MobyMask v3 react-app
+  mobymask-v3-app:
+    restart: unless-stopped
+    image: cerc/mobymask-ui:local
+    env_file:
+      - ../config/watcher-mobymask-v3/mobymask-params.env
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_CHAIN_ID: ${CERC_CHAIN_ID}
+      CERC_DEPLOYED_CONTRACT: ${CERC_DEPLOYED_CONTRACT}
+      CERC_RELAY_NODES: ${CERC_RELAY_NODES}
+      CERC_DENY_MULTIADDRS: ${CERC_DENY_MULTIADDRS}
+      CERC_PUBSUB: ${CERC_PUBSUB}
+      CERC_GOSSIPSUB_DIRECT_PEERS: ${CERC_GOSSIPSUB_DIRECT_PEERS}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+      CERC_APP_WATCHER_URL: ${CERC_APP_WATCHER_URL}
+      CERC_PAYMENT_NITRO_ADDRESS: ${CERC_PAYMENT_NITRO_ADDRESS:-0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94}
+      CERC_SNAP_URL: ${CERC_SNAP_URL}
+    working_dir: /app
+    command: ["bash", "/scripts/mobymask-app-start.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v3/mobymask-app-start.sh:/scripts/mobymask-app-start.sh
+      - peers_ids:/peers
+      - mobymask_deployment:/server
+      - nitro_deployment:/nitro
+    ports:
+      - "127.0.0.1:3004:80"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "80"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  mobymask_deployment:
+  nitro_deployment:
@@ -0,0 +1,14 @@
+version: '3.7'
+
+services:
+  mobymask-snap:
+    restart: unless-stopped
+    image: cerc/mobymask-snap:local
+    ports:
+      - "127.0.0.1:8080:8080"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "8080"]
+      interval: 10s
+      timeout: 5s
+      retries: 10
+      start_period: 10s
@@ -0,0 +1,23 @@
+version: '3.7'
+
+services:
+  # Optionally deploys the Nitro contracts
+  nitro-contracts:
+    image: cerc/nitro-contracts:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT:-http://fixturenet-eth-geth-1:8545}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    volumes:
+      - ../config/nitro-contracts/deploy.sh:/app/deploy.sh
+      - nitro_deployment:/app/deployment
+    command: ["bash", "-c", "/app/deploy.sh"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  nitro_deployment:
@@ -0,0 +1,27 @@
+version: '3.7'
+
+services:
+  nitro-reverse-payment-proxy:
+    image: cerc/go-nitro:local
+    hostname: nitro-reverse-payment-proxy
+    restart: on-failure
+    depends_on:
+      # Wait for the go-nitro node to start
+      go-nitro:
+        condition: service_healthy
+    environment:
+      CERC_PROXY_ADDRESS: 0.0.0.0:8081
+      CERC_PROXY_NITRO_ENDPOINT: ${CERC_PROXY_NITRO_ENDPOINT:-go-nitro:4005/api/v1}
+      CERC_PROXY_DESTINATION_URL: ${CERC_PROXY_DESTINATION_URL:-http://ipld-eth-server:8081}
+      CERC_PROXY_COST_PER_BYTE: ${CERC_PROXY_COST_PER_BYTE:-1}
+    entrypoint: ["bash", "-c", "/app/run-reverse-payment-proxy.sh"]
+    volumes:
+      - ../config/go-nitro/run-reverse-payment-proxy.sh:/app/run-reverse-payment-proxy.sh
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "8081"]
+      interval: 10s
+      timeout: 5s
+      retries: 10
+      start_period: 10s
+    ports:
+      - "8081:8081"
@@ -0,0 +1,7 @@
+version: '3.7'
+services:
+    nitro-rpc-client:
+      image: cerc/nitro-rpc-client:local
+      hostname: nitro-rpc-client
+      restart: on-failure
+      command: ["bash", "-c", "tail -f /dev/null"]
@@ -0,0 +1,63 @@
+version: '3.7'
+
+services:
+  ponder-app-indexer:
+    hostname: ponder-app-indexer
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_PONDER_RPC_URL_1: ${PONDER_RPC_URL_1:-http://ipld-eth-server:8081}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK:-58368d20ff12f17669c06158c21d885897aa56f9be430edc789614bf9851d53f}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK:-fb1e9af328c283ca3e2486e7c24d13582b7912057d8b9542ff41503c85bc05c0}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/ipld-eth-server/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.indexer.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - ponder_indexer_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "42070"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  ponder-app-watcher:
+    hostname: ponder-app-watcher
+    depends_on:
+      - ponder-app-indexer
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_WATCHER_NITRO_PK:-febb3b74b0b52d0976f6571d555f4ac8b91c308dfa25c7b58d1e6a7c3f50c781}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_WATCHER_NITRO_CHAIN_PK:-be4aa664815ea3bc3d63118649a733f6c96b243744310806ecb6d96359ab62cf}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer:42070/graphql}
+      CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d}
+      CERC_INDEXER_NITRO_PAY_AMOUNT: ${CERC_INDEXER_NITRO_PAY_AMOUNT:-50}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.watcher.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - ponder_watcher_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "42069"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  nitro_deployment:
+  ponder_indexer_nitro_data:
+  ponder_watcher_nitro_data:
@@ -4,6 +4,7 @@ services:
    restart: always
    environment:
      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_TEST_PARAM_1: ${CERC_TEST_PARAM_1:-FAILED}
    volumes:
      - test-data:/data
    ports:
@@ -0,0 +1,123 @@
+version: '3.2'
+
+services:
+  # Starts the PostgreSQL database for watcher
+  mobymask-watcher-db:
+    restart: unless-stopped
+    image: postgres:14-alpine
+    environment:
+      - POSTGRES_USER=vdbm
+      - POSTGRES_MULTIPLE_DATABASES=mobymask-watcher,mobymask-watcher-job-queue
+      - POSTGRES_EXTENSION=mobymask-watcher-job-queue:pgcrypto
+      - POSTGRES_PASSWORD=password
+    volumes:
+      - ../config/postgresql/multiple-postgressql-databases.sh:/docker-entrypoint-initdb.d/multiple-postgressql-databases.sh
+      - mobymask_watcher_db_data:/var/lib/postgresql/data
+    ports:
+      - "127.0.0.1:15432:5432"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+
+  # Deploys the MobyMask contract and generates an invite link
+  # Deployment is skipped if CERC_DEPLOYED_CONTRACT env is set
+  mobymask:
+    image: cerc/mobymask:local
+    working_dir: /app/packages/server
+    env_file:
+      - ../config/watcher-mobymask-v3/mobymask-params.env
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      ENV: "PROD"
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_MOBYMASK_APP_BASE_URI: ${CERC_MOBYMASK_APP_BASE_URI}
+      CERC_DEPLOYED_CONTRACT: ${CERC_DEPLOYED_CONTRACT}
+    command: ["bash", "-c", "./deploy-and-generate-invite.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v3/deploy-and-generate-invite.sh:/app/packages/server/deploy-and-generate-invite.sh
+      - mobymask_deployment:/app/packages/server
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  # Creates peer-id files if they don't exist
+  peer-ids-gen:
+    image: cerc/watcher-ts:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+    working_dir: /app/packages/peer
+    command: ["sh", "generate-peer-ids.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v2/generate-peer-ids.sh:/app/packages/peer/generate-peer-ids.sh
+      - peers_ids:/peer-ids
+
+  # Starts the MobyMask v3 watcher server
+  mobymask-watcher-server:
+    image: cerc/watcher-mobymask-v3:local
+    restart: unless-stopped
+    depends_on:
+      mobymask-watcher-db:
+        condition: service_healthy
+      peer-ids-gen:
+        condition: service_completed_successfully
+      mobymask:
+        condition: service_completed_successfully
+      nitro-contracts:
+        condition: service_completed_successfully
+    env_file:
+      - ../config/watcher-mobymask-v3/mobymask-params.env
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_QUERY_ENDPOINT: ${CERC_ETH_RPC_QUERY_ENDPOINT}
+      CERC_ETH_RPC_MUTATION_ENDPOINT: ${CERC_ETH_RPC_MUTATION_ENDPOINT}
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL}
+      CERC_RELAY_PEERS: ${CERC_RELAY_PEERS}
+      CERC_DENY_MULTIADDRS: ${CERC_DENY_MULTIADDRS}
+      CERC_PUBSUB: ${CERC_PUBSUB}
+      CERC_RELAY_ANNOUNCE_DOMAIN: ${CERC_RELAY_ANNOUNCE_DOMAIN}
+      CERC_ENABLE_PEER_L2_TXS: ${CERC_ENABLE_PEER_L2_TXS}
+      CERC_DEPLOYED_CONTRACT: ${CERC_DEPLOYED_CONTRACT}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+      CERC_PRIVATE_KEY_PEER: ${CERC_PRIVATE_KEY_PEER:-111b7500bdce494d6f4bcfe8c2a0dde2ef92f751d9070fac6475dbd6d8021b3f}
+      CERC_WATCHER_NITRO_PK: ${CERC_WATCHER_NITRO_PK:-0279651921cd800ac560c21ceea27aab0107b67daf436cdd25ce84cad30159b4}
+      CERC_PEER_ID: ${CERC_PEER_ID}
+      CERC_ENABLE_UPSTREAM_PAYMENTS: ${CERC_ENABLE_UPSTREAM_PAYMENTS}
+      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/ipld-eth-server/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./start-server.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v3/watcher-config-template.toml:/app/environments/watcher-config-template.toml
+      - ../config/watcher-mobymask-v3/watcher-config-rates.toml:/app/environments/rates.toml
+      - ../config/watcher-mobymask-v3/keys:/app/keys
+      - ../config/watcher-mobymask-v3/start-server.sh:/app/start-server.sh
+      - watcher_nitro_data:/app/out/nitro-db
+      - peers_ids:/app/peers
+      - nitro_deployment:/nitro
+      - mobymask_deployment:/server
+    # Expose GQL, metrics and relay node ports
+    ports:
+      - "127.0.0.1:3001:3001"
+      - "127.0.0.1:9001:9001"
+      - "127.0.0.1:9090:9090"
+    healthcheck:
+      test: ["CMD", "busybox", "nc", "localhost", "9090"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  mobymask_watcher_db_data:
+  peers_ids:
+  mobymask_deployment:
+  nitro_deployment:
+  watcher_nitro_data:
@@ -17,8 +17,8 @@ module.exports = {
    whitelistedTokenAddresses: [
      'NATIVE_ADDRESS',
    ],
-    stableTokenAddresses: [
-    ],
+    stableTokenAddresses: [],
+    nativePricePool: '0x0000000000000000000000000000000000000000',
    minimumEthLocked: 1.5
  }
 }
@@ -0,0 +1,49 @@
+#!/bin/bash
+
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  NA_ADDRESS=${CERC_NA_ADDRESS}
+  VPA_ADDRESS=${CERC_VPA_ADDRESS}
+  CA_ADDRESS=${CERC_CA_ADDRESS}
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Reading Nitro addresses from ${nitro_addresses_file}"
+
+  NA_ADDRESS=$(jq -r '.nitroAdjudicatorAddress' ${nitro_addresses_file})
+  VPA_ADDRESS=$(jq -r '.virtualPaymentAppAddress' ${nitro_addresses_file})
+  CA_ADDRESS=$(jq -r '.consensusAppAddress' ${nitro_addresses_file})
+else
+  echo "File ${nitro_addresses_file} not found"
+  exit 1
+fi
+
+echo "Running Nitro node"
+
+# Wait till chain endpoint is available
+retry_interval=5
+while true; do
+  # Assuming CERC_NITRO_CHAIN_URL is of format <ws|http>://host:port
+  ws_host=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 1)
+  ws_port=$(echo "$CERC_NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 2)
+  nc -z -w 1 "$ws_host" "$ws_port"
+
+  if [ $? -eq 0 ]; then
+    echo "Chain endpoint is available"
+    break
+  fi
+
+  echo "Chain endpoint not yet available, retrying in $retry_interval seconds..."
+  sleep $retry_interval
+done
+
+./nitro -chainurl ${CERC_NITRO_CHAIN_URL} -msgport 3005 -rpcport 4005 -wsmsgport 5005 -pk ${CERC_NITRO_PK} -chainpk ${CERC_NITRO_CHAIN_PK} -naaddress ${NA_ADDRESS} -vpaaddress ${VPA_ADDRESS} -caaddress ${CA_ADDRESS} -usedurablestore ${CERC_NITRO_USE_DURABLE_STORE} -durablestorefolder ${CERC_NITRO_DURABLE_STORE_FOLDER}
@@ -0,0 +1,14 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+echo "Running Nitro reverse payment proxy"
+echo "Using CERC_PROXY_ADDRESS ${CERC_PROXY_ADDRESS}"
+echo "Using CERC_PROXY_NITRO_ENDPOINT ${CERC_PROXY_NITRO_ENDPOINT}"
+echo "Using CERC_PROXY_DESTINATION_URL ${CERC_PROXY_DESTINATION_URL}"
+echo "Using CERC_PROXY_COST_PER_BYTE ${CERC_PROXY_COST_PER_BYTE}"
+
+./proxy -proxyaddress ${CERC_PROXY_ADDRESS} -nitroendpoint=${CERC_PROXY_NITRO_ENDPOINT} -destinationurl=${CERC_PROXY_DESTINATION_URL} -costperbyte ${CERC_PROXY_COST_PER_BYTE} -enablepaidrpcmethods
@@ -0,0 +1,57 @@
+#!/bin/sh
+
+nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  export NITRO_NA_ADDRESS=${CERC_NA_ADDRESS}
+  export NITRO_VPA_ADDRESS=${CERC_VPA_ADDRESS}
+  export NITRO_CA_ADDRESS=${CERC_CA_ADDRESS}
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Reading Nitro addresses from ${nitro_addresses_file}"
+
+  export NITRO_NA_ADDRESS=$(jq -r '.nitroAdjudicatorAddress' ${nitro_addresses_file})
+  export NITRO_VPA_ADDRESS=$(jq -r '.virtualPaymentAppAddress' ${nitro_addresses_file})
+  export NITRO_CA_ADDRESS=$(jq -r '.consensusAppAddress' ${nitro_addresses_file})
+else
+  echo "File ${nitro_addresses_file} not found"
+  exit 1
+fi
+
+# Wait till chain endpoint is available
+retry_interval=5
+while true; do
+  # Assuming NITRO_CHAIN_URL is of format <ws|http>://host:port
+  ws_host=$(echo "$NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 1)
+  ws_port=$(echo "$NITRO_CHAIN_URL" | awk -F '://' '{print $2}' | cut -d ':' -f 2)
+  nc -z -w 1 "$ws_host" "$ws_port"
+
+  if [ $? -eq 0 ]; then
+    echo "Chain endpoint is available"
+    break
+  fi
+
+  echo "Chain endpoint not yet available, retrying in $retry_interval seconds..."
+  sleep $retry_interval
+done
+
+echo "Beginning the ipld-eth-server process"
+
+START_CMD="./ipld-eth-server"
+if [ "true" == "$CERC_REMOTE_DEBUG" ] && [ -x "/usr/local/bin/dlv" ]; then
+    START_CMD="/usr/local/bin/dlv --listen=:40000 --headless=true --api-version=2 --accept-multiclient exec `pwd`/ipld-eth-server --continue --"
+fi
+
+echo running: $START_CMD ${VDB_COMMAND} --config=`pwd`/config.toml
+$START_CMD ${VDB_COMMAND} --config=`pwd`/config.toml
+rv=$?
+
+if [ $rv != 0 ]; then
+  echo "ipld-eth-server startup failed"
+  exit 1
+fi
@@ -10,6 +10,13 @@ scrape_configs:
    static_configs:
    - targets: ['mainnet-eth-geth-1:6060']

+  # lighthouse
+  - job_name: 'lighthouse'
+    metrics_path: /metrics
+    scheme: http
+    static_configs:
+    - targets: ['mainnet-eth-lighthouse-1:5054']
+
  # keycloak
  - job_name: 'keycloak'
    scrape_interval: 5s
@@ -0,0 +1,57 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+nitro_addresses_file="/app/deployment/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable set to skip contract deployment
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Skipping Nitro contracts deployment"
+  exit
+fi
+
+# Check and exit if a deployment already exists (on restarts)
+if [ -f ${nitro_addresses_file} ]; then
+  echo "${nitro_addresses_file} already exists, skipping Nitro contracts deployment"
+  cat ${nitro_addresses_file}
+  exit
+fi
+
+echo "Using ETH RPC endpoint ${CERC_ETH_RPC_ENDPOINT}"
+
+# Wait till ETH RPC endpoint is available with block number > 1
+retry_interval=5
+while true; do
+  block_number_hex=$(curl -s -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' ${CERC_ETH_RPC_ENDPOINT} | jq -r '.result')
+
+  # Check if the request call was successful
+  if [ $? -ne 0 ]; then
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+
+  # Convert hex to decimal
+  block_number_dec=$(printf %u ${block_number_hex})
+
+  # Check if block number is > 1 to avoid failures in the deployment
+  if [ "$block_number_dec" -ge 1 ]; then
+    echo "RPC endpoint is up"
+    break
+  else
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+done
+
+echo "Using CERC_PRIVATE_KEY_DEPLOYER from env"
+
+yarn test:deploy-contracts --chainUrl ${CERC_ETH_RPC_ENDPOINT} --key ${CERC_PRIVATE_KEY_DEPLOYER} --addressesFilePath ${nitro_addresses_file}
+cat ${nitro_addresses_file}
@@ -0,0 +1,63 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+nitro_addresses_file="/nitro/nitro-addresses.json"
+nitro_addresses_destination_file="/app/examples/token-erc20/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  # Create the required JSON and write it to a file
+  nitro_addresses_json=$(jq -n \
+    --arg na "$CERC_NA_ADDRESS" \
+    --arg vpa "$CERC_VPA_ADDRESS" \
+    --arg ca "$CERC_CA_ADDRESS" \
+    '.nitroAdjudicatorAddress = $na | .virtualPaymentAppAddress = $vpa | .consensusAppAddress = $ca')
+  echo "$nitro_addresses_json" > "${nitro_addresses_destination_file}"
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Using Nitro addresses from ${nitro_addresses_file}:"
+  cat "$nitro_addresses_file"
+  cat "$nitro_addresses_file" > "$nitro_addresses_destination_file"
+else
+  echo "Nitro addresses not available"
+  exit 1
+fi
+
+echo "Using CERC_PONDER_NITRO_PK from env for Nitro account"
+echo "Using CERC_PONDER_NITRO_CHAIN_PK (account with funds) from env for sending Nitro txs"
+echo "Using ${CERC_PONDER_NITRO_CHAIN_URL} as the RPC endpoint for Nitro txs"
+
+# If not set, check the mounted volume for relay peer id
+if [ -z "$CERC_RELAY_MULTIADDR" ]; then
+  echo "CERC_RELAY_MULTIADDR not provided, taking from the mounted volume"
+  CERC_RELAY_MULTIADDR="/dns4/mobymask-watcher-server/tcp/9090/ws/p2p/$(jq -r '.id' /peers/relay-id.json)"
+fi
+
+env_file='.env.local'
+echo "PONDER_TELEMETRY_DISABLED=true" > "$env_file"
+echo "PONDER_LOG_LEVEL=debug" >> "$env_file"
+echo "PONDER_CHAIN_ID=\"$CERC_PONDER_CHAIN_ID\"" >> "$env_file"
+echo "PONDER_RPC_URL_1=\"$CERC_PONDER_RPC_URL_1\"" >> "$env_file"
+echo "PONDER_NITRO_PK=\"$CERC_PONDER_NITRO_PK\"" >> "$env_file"
+echo "PONDER_NITRO_CHAIN_PK=\"$CERC_PONDER_NITRO_CHAIN_PK\"" >> "$env_file"
+echo "PONDER_NITRO_CHAIN_URL=\"$CERC_PONDER_NITRO_CHAIN_URL\"" >> "$env_file"
+echo "RELAY_MULTIADDR=\"$CERC_RELAY_MULTIADDR\"" >> "$env_file"
+echo "UPSTREAM_NITRO_ADDRESS=\"$CERC_UPSTREAM_NITRO_ADDRESS\"" >> "$env_file"
+echo "UPSTREAM_NITRO_MULTIADDR=\"$CERC_UPSTREAM_NITRO_MULTIADDR\"" >> "$env_file"
+echo "UPSTREAM_NITRO_PAY_AMOUNT=\"$CERC_UPSTREAM_NITRO_PAY_AMOUNT\"" >> "$env_file"
+echo "INDEXER_GQL_ENDPOINT=\"$CERC_INDEXER_GQL_ENDPOINT\"" >> "$env_file"
+echo "INDEXER_NITRO_ADDRESS=\"$CERC_INDEXER_NITRO_ADDRESS\"" >> "$env_file"
+echo "INDEXER_NITRO_PAY_AMOUNT=\"$CERC_INDEXER_NITRO_PAY_AMOUNT\"" >> "$env_file"
+
+cat "$env_file"
+
+# Keep the container running
+tail -f
@@ -0,0 +1,53 @@
+import { type Config, AppMode } from "@ponder/core";
+
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };
+
+export const config: Config = {
+  networks: [
+    {
+      name: "fixturenet",
+      chainId: Number(process.env.PONDER_CHAIN_ID),
+      rpcUrl: process.env.PONDER_RPC_URL_1,
+      maxRpcRequestConcurrency: 1,
+      pollingInterval: 5000,
+      payments: {
+        nitro: {
+          address: process.env.UPSTREAM_NITRO_ADDRESS!,
+          multiAddr: process.env.UPSTREAM_NITRO_MULTIADDR!,
+          fundingAmounts: {
+            // TODO: Pass amounts from env
+            directFund: "1000000000000",
+            virtualFund: "1000000000",
+          },
+        },
+        paidRPCMethods: [
+          "eth_getLogs",
+          "eth_getBlockByNumber",
+          "eth_getBlockByHash",
+        ],
+        amount: process.env.UPSTREAM_NITRO_PAY_AMOUNT!,
+      },
+    },
+  ],
+  contracts: [
+    {
+      name: "AdventureGold",
+      network: "fixturenet",
+      abi: "./abis/AdventureGold.json",
+      address: "0x32353A6C91143bfd6C7d363B546e62a9A2489A20",
+      startBlock: 5,
+      maxBlockRange: 100,
+    },
+  ],
+  options: {
+    mode: AppMode.Indexer,
+  },
+  nitro: {
+    privateKey: process.env.PONDER_NITRO_PK!,
+    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
+    chainUrl: process.env.PONDER_NITRO_CHAIN_URL!,
+    contractAddresses,
+    relayMultiAddr: process.env.RELAY_MULTIADDR!,
+    store: "./.ponder/nitro-db",
+  },
+};
@@ -0,0 +1,46 @@
+import { type Config, AppMode } from "@ponder/core";
+
+import contractAddresses from "./nitro-addresses.json" assert { type: "json" };
+
+export const config: Config = {
+  networks: [
+    {
+      name: "fixturenet",
+      chainId: Number(process.env.PONDER_CHAIN_ID),
+    },
+  ],
+  contracts: [
+    {
+      name: "AdventureGold",
+      network: "fixturenet",
+      abi: "./abis/AdventureGold.json",
+      address: "0x32353A6C91143bfd6C7d363B546e62a9A2489A20",
+      startBlock: 5,
+      maxBlockRange: 100,
+    },
+  ],
+  options: {
+    mode: AppMode.Watcher,
+  },
+  indexer: {
+    gqlEndpoint: process.env.INDEXER_GQL_ENDPOINT,
+    payments: {
+      nitro: {
+        address: process.env.INDEXER_NITRO_ADDRESS,
+        fundingAmounts: {
+          directFund: "1000000000000",
+          virtualFund: "1000000000",
+        },
+      },
+      amount: process.env.INDEXER_NITRO_PAY_AMOUNT,
+    },
+  },
+  nitro: {
+    privateKey: process.env.PONDER_NITRO_PK!,
+    chainPrivateKey: process.env.PONDER_NITRO_CHAIN_PK!,
+    chainUrl: process.env.PONDER_NITRO_CHAIN_URL!,
+    contractAddresses,
+    relayMultiAddr: process.env.RELAY_MULTIADDR!,
+    store: "./.ponder/nitro-db",
+  }
+};
@@ -0,0 +1,78 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_ETH_RPC_ENDPOINT="${CERC_ETH_RPC_ENDPOINT:-${DEFAULT_CERC_ETH_RPC_ENDPOINT}}"
+CERC_MOBYMASK_APP_BASE_URI="${CERC_MOBYMASK_APP_BASE_URI:-${DEFAULT_CERC_MOBYMASK_APP_BASE_URI}}"
+CERC_DEPLOYED_CONTRACT="${CERC_DEPLOYED_CONTRACT:-${DEFAULT_CERC_DEPLOYED_CONTRACT}}"
+
+# Check if CERC_DEPLOYED_CONTRACT environment variable set to skip contract deployment
+if [ -n "$CERC_DEPLOYED_CONTRACT" ]; then
+  echo "CERC_DEPLOYED_CONTRACT is set to '$CERC_DEPLOYED_CONTRACT'"
+  echo "Skipping contract deployment"
+  exit 0
+fi
+
+echo "Using ETH RPC endpoint ${CERC_ETH_RPC_ENDPOINT}"
+
+# Wait till ETH RPC endpoint is available with block number > 1
+retry_interval=5
+while true; do
+  block_number_hex=$(curl -s -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' ${CERC_ETH_RPC_ENDPOINT} | jq -r '.result')
+
+  # Check if the request call was successful
+  if [ $? -ne 0 ]; then
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+
+  # Convert hex to decimal
+  block_number_dec=$(printf %u ${block_number_hex})
+
+  # Check if block number is > 1 to avoid failures in the deployment
+  if [ "$block_number_dec" -ge 1 ]; then
+    echo "RPC endpoint is up"
+    break
+  else
+    echo "RPC endpoint not yet available, retrying in $retry_interval seconds..."
+    sleep $retry_interval
+    continue
+  fi
+done
+
+echo "Using CERC_PRIVATE_KEY_DEPLOYER from env"
+
+# Create the required JSON and write it to a file
+secrets_file="secrets.json"
+secrets_json=$(jq -n \
+  --arg privateKey "$CERC_PRIVATE_KEY_DEPLOYER" \
+  --arg rpcUrl "$CERC_ETH_RPC_ENDPOINT" \
+  --arg baseURI "$CERC_MOBYMASK_APP_BASE_URI" \
+  '.privateKey = $privateKey | .rpcUrl = $rpcUrl | .baseURI = $baseURI')
+echo "$secrets_json" > "${secrets_file}"
+
+export RPC_URL="${CERC_ETH_RPC_ENDPOINT}"
+
+# Check and exit if a deployment already exists (on restarts)
+if [ -f ./config.json ]; then
+  echo "config.json already exists, checking the contract deployment"
+
+  # Read JSON file
+  deployment_details=$(cat config.json)
+  deployed_contract=$(echo "$deployment_details" | jq -r '.address')
+
+  cd ../hardhat
+  if yarn verifyDeployment --network optimism --contract "${deployed_contract}"; then
+    echo "Deployment verfication successful"
+    cd ../server
+  else
+    echo "Deployment verfication failed, please clear MobyMask deployment volume before starting"
+    exit 1
+  fi
+fi
+
+npm run deployAndGenerateInvite
@@ -0,0 +1,11 @@
+{
+  "peerId": {
+    "id": "12D3KooWAMjBkFCT9DtCnSDcxftxJzSuTBvzVojabv64cnEvX4AZ",
+    "privKey": "CAESQAKCrnY0QKTky1I18fqn+VPydXGUv1NYiV+nVKqBFkw/CAjE9sKKIDGnYAo8mivnI6dngFenERY+0Q8AJrPTaXY=",
+    "pubKey": "CAESIAgIxPbCiiAxp2AKPJor5yOnZ4BXpxEWPtEPACaz02l2"
+  },
+  "consensus": {
+    "publicKey": "02cd17b05ca998955be5ca7bf4fd4531243d438f1aae7ce8a0ed5159f53cee5b40",
+    "privateKey": "67d80505614bdf61fca11cbad31d93acb2c7df1c653dc25975d77d05f05f154f"
+  }
+}
@@ -0,0 +1,11 @@
+{
+  "peerId": {
+    "id": "12D3KooWBNEbY3QS4y23ngupDw9PDc4bvNvRJGVRejjV9EZLjux5",
+    "privKey": "CAESQGSTw0ymvn8+wX9Dbvyr4/Gib1q2voe0CC0VyeClMQP6FwW14x0fpRbBIx0XhLdxWHkRndphVg3gVAHyC+7ZI8o=",
+    "pubKey": "CAESIBcFteMdH6UWwSMdF4S3cVh5EZ3aYVYN4FQB8gvu2SPK"
+  },
+  "consensus": {
+    "publicKey": "029c8035b3e9401b8f178f7c37285b5cb22501e017340e2058b3b842f2a1f0ae45",
+    "privateKey": "0261008e8e3ec808168e99333599da38ca59a056a2ae4510a6ad3d8b5cb0918c"
+  }
+}
@@ -0,0 +1,11 @@
+{
+  "peerId": {
+    "id": "12D3KooWSRH6ftgkAZsKZK7UX1Zr6Hx6YAsEepHqzopFszqfTxxi",
+    "privKey": "CAESQHBjlHxfVhZ2gXsBItrIEEgSGKcjMkFiGs3PPz9E3ace9qyWEkvR4oit5ve9SAROVoh20hoa42IC91NIafMaqws=",
+    "pubKey": "CAESIPaslhJL0eKIreb3vUgETlaIdtIaGuNiAvdTSGnzGqsL"
+  },
+  "consensus": {
+    "publicKey": "039160c244a7ad8be16a64bdb69e6dbacdcfe20b37076792a0d06032a8097468ca",
+    "privateKey": "8894685fe81001d75662b079905472699373967451d1255ee5fc669d0a09a9ca"
+  }
+}
@@ -0,0 +1,86 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_CHAIN_ID="${CERC_CHAIN_ID:-${DEFAULT_CERC_CHAIN_ID}}"
+CERC_DEPLOYED_CONTRACT="${CERC_DEPLOYED_CONTRACT:-${DEFAULT_CERC_DEPLOYED_CONTRACT}}"
+CERC_RELAY_NODES="${CERC_RELAY_NODES:-${DEFAULT_CERC_RELAY_NODES}}"
+CERC_DENY_MULTIADDRS="${CERC_DENY_MULTIADDRS:-${DEFAULT_CERC_DENY_MULTIADDRS}}"
+CERC_PUBSUB="${CERC_PUBSUB:-${DEFAULT_CERC_PUBSUB}}"
+CERC_GOSSIPSUB_DIRECT_PEERS="${CERC_GOSSIPSUB_DIRECT_PEERS:-${DEFAULT_CERC_GOSSIPSUB_DIRECT_PEERS}}"
+CERC_APP_WATCHER_URL="${CERC_APP_WATCHER_URL:-${DEFAULT_CERC_APP_WATCHER_URL}}"
+CERC_SNAP_URL="${CERC_SNAP_URL:-${DEFAULT_CERC_SNAP_URL}}"
+
+# If not set (or []), check the mounted volume for relay peer id
+if [ -z "$CERC_RELAY_NODES" ] || [ "$CERC_RELAY_NODES" = "[]" ]; then
+  echo "CERC_RELAY_NODES not provided, taking from the mounted volume"
+  CERC_RELAY_NODES="[\"/ip4/127.0.0.1/tcp/9090/ws/p2p/$(jq -r '.id' /peers/relay-id.json)\"]"
+fi
+
+echo "Using CERC_RELAY_NODES $CERC_RELAY_NODES"
+
+if [ -z "$CERC_DEPLOYED_CONTRACT" ]; then
+  # Use config from mounted volume (when running web-app along with watcher stack)
+  echo "Taking config for deployed contract from mounted volume"
+  while [ ! -f /server/config.json ]; do
+    echo "Config not found, retrying in 5 seconds..."
+    sleep 5
+  done
+
+  # Get deployed contract address and chain id
+  CERC_DEPLOYED_CONTRACT=$(jq -r '.address' /server/config.json | tr -d '"')
+  CERC_CHAIN_ID=$(jq -r '.chainId' /server/config.json)
+else
+  echo "Using CERC_DEPLOYED_CONTRACT ${CERC_DEPLOYED_CONTRACT} from env as the MobyMask contract address"
+fi
+
+nitro_addresses_file="/nitro/nitro-addresses.json"
+nitro_addresses_destination_file="/app/src/utils/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  # Create the required JSON and write it to a file
+  nitro_addresses_json=$(jq -n \
+    --arg na "$CERC_NA_ADDRESS" \
+    --arg vpa "$CERC_VPA_ADDRESS" \
+    --arg ca "$CERC_CA_ADDRESS" \
+    '.nitroAdjudicatorAddress = $na | .virtualPaymentAppAddress = $vpa | .consensusAppAddress = $ca')
+  echo "$nitro_addresses_json" > "${nitro_addresses_destination_file}"
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Using Nitro addresses from ${nitro_addresses_file}:"
+  cat "$nitro_addresses_file"
+  cat "$nitro_addresses_file" > "$nitro_addresses_destination_file"
+else
+  echo "Nitro addresses not available"
+  exit 1
+fi
+
+# Export config values in a json file
+app_config_file="/app/src/utils/config.json"
+app_config_json=$(jq -n \
+  --arg name "MobyMask" \
+  --argjson enableDebugInfo true \
+  --arg address "$CERC_DEPLOYED_CONTRACT" \
+  --argjson chainId "$CERC_CHAIN_ID" \
+  --argjson relayNodes "$CERC_RELAY_NODES" \
+  --argjson denyMultiaddrs "$CERC_DENY_MULTIADDRS" \
+  --arg pubsub "$CERC_PUBSUB" \
+  --argjson directPeers "$CERC_GOSSIPSUB_DIRECT_PEERS" \
+  '.name = $name | .address = $address | .chainId = $chainId | .relayNodes = $relayNodes | .peer.enableDebugInfo = $enableDebugInfo | .peer.denyMultiaddrs = $denyMultiaddrs | .peer.pubsub = $pubsub | .peer.directPeers = $directPeers')
+echo "$app_config_json" > "${app_config_file}"
+
+REACT_APP_DEBUG_PEER=true \
+REACT_APP_WATCHER_URI="$CERC_APP_WATCHER_URL/graphql" \
+REACT_APP_PAY_TO_NITRO_ADDRESS="$CERC_PAYMENT_NITRO_ADDRESS" \
+REACT_APP_SNAP_ORIGIN="local:$CERC_SNAP_URL" \
+yarn build
+
+http-server -p 80 /app/build
@@ -0,0 +1,53 @@
+# Defaults
+
+# ETH RPC endpoint used for contract(s) deployment
+DEFAULT_CERC_ETH_RPC_ENDPOINT="http://fixturenet-eth-geth-1:8545"
+
+# ETH RPC endpoint used for queries in the watcher
+DEFAULT_CERC_ETH_RPC_QUERY_ENDPOINT="http://ipld-eth-server:8081"
+
+# ETH RPC endpoint used for mutations in the watcher
+DEFAULT_CERC_ETH_RPC_MUTATION_ENDPOINT="http://fixturenet-eth-geth-1:8545"
+
+# ETH endpoint used by watcher's Nitro node
+DEFAULT_CERC_NITRO_CHAIN_URL="http://fixturenet-eth-geth-1:8546"
+
+# Set of relay peers to connect to from the relay node
+DEFAULT_CERC_RELAY_PEERS=[]
+
+# Domain to be used in the relay node's announce address
+DEFAULT_CERC_RELAY_ANNOUNCE_DOMAIN=
+
+# Base URI for mobymask-app (used for generating invite)
+DEFAULT_CERC_MOBYMASK_APP_BASE_URI="http://127.0.0.1:3004/#"
+
+# Set to false for disabling watcher peer to send txs to L2
+DEFAULT_CERC_ENABLE_PEER_L2_TXS=true
+
+# Set deployed MobyMask contract address to avoid deploying contract in stack
+# mobymask-app will use this contract address in config if run separately
+DEFAULT_CERC_DEPLOYED_CONTRACT=
+
+# Chain ID is used by mobymask web-app for txs
+DEFAULT_CERC_CHAIN_ID=1212
+
+# Watcher endpoint used by the web-app
+DEFAULT_CERC_APP_WATCHER_URL="http://localhost:3001"
+
+# MobyMask snap URL to be used by the web-app
+DEFAULT_CERC_SNAP_URL=http://localhost:8080
+
+# Set of relay nodes to be used by web-apps
+DEFAULT_CERC_RELAY_NODES=[]
+
+# Set of multiaddrs to be avoided while dialling
+DEFAULT_CERC_DENY_MULTIADDRS=[]
+
+# Type of pubsub to be used
+DEFAULT_CERC_PUBSUB=""
+
+# Set of direct peers to be used when pubsub is set to gossipsub
+DEFAULT_CERC_GOSSIPSUB_DIRECT_PEERS=[]
+
+# Whether to enable payments to upstream ETH server
+DEFAULT_CERC_ENABLE_UPSTREAM_PAYMENTS=true
@@ -0,0 +1,166 @@
+#!/bin/bash
+
+set -e
+if [ -n "$CERC_SCRIPT_DEBUG" ]; then
+  set -x
+fi
+
+CERC_ETH_RPC_QUERY_ENDPOINT="${CERC_ETH_RPC_QUERY_ENDPOINT:-${DEFAULT_CERC_ETH_RPC_QUERY_ENDPOINT}}"
+CERC_ETH_RPC_MUTATION_ENDPOINT="${CERC_ETH_RPC_MUTATION_ENDPOINT:-${DEFAULT_CERC_ETH_RPC_MUTATION_ENDPOINT}}"
+CERC_NITRO_CHAIN_URL="${CERC_NITRO_CHAIN_URL:-${DEFAULT_CERC_NITRO_CHAIN_URL}}"
+CERC_RELAY_PEERS="${CERC_RELAY_PEERS:-${DEFAULT_CERC_RELAY_PEERS}}"
+CERC_DENY_MULTIADDRS="${CERC_DENY_MULTIADDRS:-${DEFAULT_CERC_DENY_MULTIADDRS}}"
+CERC_PUBSUB="${CERC_PUBSUB:-${DEFAULT_CERC_PUBSUB}}"
+CERC_RELAY_ANNOUNCE_DOMAIN="${CERC_RELAY_ANNOUNCE_DOMAIN:-${DEFAULT_CERC_RELAY_ANNOUNCE_DOMAIN}}"
+CERC_ENABLE_PEER_L2_TXS="${CERC_ENABLE_PEER_L2_TXS:-${DEFAULT_CERC_ENABLE_PEER_L2_TXS}}"
+CERC_DEPLOYED_CONTRACT="${CERC_DEPLOYED_CONTRACT:-${DEFAULT_CERC_DEPLOYED_CONTRACT}}"
+CERC_ENABLE_UPSTREAM_PAYMENTS="${CERC_ENABLE_UPSTREAM_PAYMENTS:-${DEFAULT_CERC_ENABLE_UPSTREAM_PAYMENTS}}"
+
+watcher_keys_dir="./keys"
+
+echo "Using RPC query endpoint ${CERC_ETH_RPC_QUERY_ENDPOINT}"
+echo "Using RPC mutation endpoint ${CERC_ETH_RPC_MUTATION_ENDPOINT}"
+echo "Using Nitro chain URL ${CERC_NITRO_CHAIN_URL}"
+
+# Use public domain for relay multiaddr in peer config if specified
+# Otherwise, use the docker container's host IP
+if [ -n "$CERC_RELAY_ANNOUNCE_DOMAIN" ]; then
+  CERC_RELAY_MULTIADDR="/dns4/${CERC_RELAY_ANNOUNCE_DOMAIN}/tcp/443/wss/p2p/$(jq -r '.id' /app/peers/relay-id.json)"
+else
+  CERC_RELAY_MULTIADDR="/dns4/mobymask-watcher-server/tcp/9090/ws/p2p/$(jq -r '.id' /app/peers/relay-id.json)"
+fi
+
+# Use contract address from environment variable or set from config.json in mounted volume
+if [ -n "$CERC_DEPLOYED_CONTRACT" ]; then
+  CONTRACT_ADDRESS="${CERC_DEPLOYED_CONTRACT}"
+else
+  # Assign deployed contract address from server config (created by mobymask container after deploying contract)
+  CONTRACT_ADDRESS=$(jq -r '.address' /server/config.json | tr -d '"')
+fi
+
+nitro_addresses_file="/nitro/nitro-addresses.json"
+nitro_addresses_destination_file="./src/nitro-addresses.json"
+
+# Check if CERC_NA_ADDRESS environment variable is set
+if [ -n "$CERC_NA_ADDRESS" ]; then
+  echo "CERC_NA_ADDRESS is set to '$CERC_NA_ADDRESS'"
+  echo "CERC_VPA_ADDRESS is set to '$CERC_VPA_ADDRESS'"
+  echo "CERC_CA_ADDRESS is set to '$CERC_CA_ADDRESS'"
+  echo "Using the above Nitro addresses"
+
+  # Create the required JSON and write it to a file
+  nitro_addresses_json=$(jq -n \
+    --arg na "$CERC_NA_ADDRESS" \
+    --arg vpa "$CERC_VPA_ADDRESS" \
+    --arg ca "$CERC_CA_ADDRESS" \
+    '.nitroAdjudicatorAddress = $na | .virtualPaymentAppAddress = $vpa | .consensusAppAddress = $ca')
+  echo "$nitro_addresses_json" > "${nitro_addresses_destination_file}"
+elif [ -f ${nitro_addresses_file} ]; then
+  echo "Using Nitro addresses from ${nitro_addresses_file}:"
+  cat "$nitro_addresses_file"
+  cat "$nitro_addresses_file" > "$nitro_addresses_destination_file"
+else
+  echo "Nitro addresses not available"
+  exit 1
+fi
+
+# Build after setting the Nitro addresses
+yarn build
+
+echo "Using CERC_PRIVATE_KEY_PEER (account with funds) from env for sending txs to L2"
+echo "Using CERC_WATCHER_NITRO_PK from env for Nitro account"
+
+if [ -n "$CERC_PEER_ID" ]; then
+  echo "Using CERC_PEER_ID ${CERC_PEER_ID} from env for watcher fixture"
+  echo "Consensus module enabled"
+
+  # Set corresponding variables
+  PEER_ID_FILE='./peer-id.json'
+  CONSENSUS_ENABLED=true
+  WATCHER_PARTY_PEERS_FILE='./watcher-party-peers.json'
+
+  # Create watcher party array
+  watcher_parties=()
+
+  # Iterate over each fixture JSON file
+  for peer_data_file in "$watcher_keys_dir"/*.json; do
+    # Extract the filename without the path and extension
+    peer_id=$(basename "$peer_data_file" .json)
+
+    # Read the consensus keys
+    consensus_public_key=$(jq -r '.consensus.publicKey' "$peer_data_file")
+    consensus_private_key=$(jq -r '.consensus.privateKey' "$peer_data_file")
+
+    # Append watcher party
+    watcher_party=$(jq -n \
+      --arg peerId "$peer_id" \
+      --arg publicKey "$consensus_public_key" \
+      '.peerId = $peerId | .publicKey = $publicKey')
+    watcher_parties+=("$watcher_party")
+
+    if [ "$peer_id" = "$CERC_PEER_ID" ]; then
+      # Export peer id
+      peer_id_data=$(jq '.peerId' "$peer_data_file")
+      echo "$peer_id_data" > "${PEER_ID_FILE}"
+
+      # Set consensus keys for this peer
+      CONSENSUS_PUBLIC_KEY=${consensus_public_key}
+      CONSENSUS_PRIVATE_KEY=${consensus_private_key}
+    fi
+  done
+
+  # Export watcher party file
+  watcher_parties_json=$(printf '%s\n' "${watcher_parties[@]}" | jq -s .)
+  echo "$watcher_parties_json" > "${WATCHER_PARTY_PEERS_FILE}"
+  echo "Watcher party peers exported to ${WATCHER_PARTY_PEERS_FILE}"
+else
+  echo "Using generated peer id"
+  echo "Consensus module disabled"
+
+  # Set corresponding variables
+  PEER_ID_FILE='./peers/peer-id.json'
+  CONSENSUS_ENABLED=false
+  WATCHER_PARTY_PEERS_FILE=''
+  CONSENSUS_PUBLIC_KEY=''
+  CONSENSUS_PRIVATE_KEY=''
+fi
+
+if [ "$CERC_ENABLE_UPSTREAM_PAYMENTS" = true ]; then
+  UPSTREAM_NITRO_ADDRESS=${CERC_UPSTREAM_NITRO_ADDRESS}
+  UPSTREAM_NITRO_MULTIADDR=${CERC_UPSTREAM_NITRO_MULTIADDR}
+  UPSTREAM_NITRO_PAY_AMOUNT=${CERC_UPSTREAM_NITRO_PAY_AMOUNT}
+else
+  UPSTREAM_NITRO_ADDRESS=""
+  UPSTREAM_NITRO_MULTIADDR=""
+  UPSTREAM_NITRO_PAY_AMOUNT=""
+fi
+
+# Read in the config template TOML file and modify it
+WATCHER_CONFIG_TEMPLATE=$(cat environments/watcher-config-template.toml)
+WATCHER_CONFIG=$(echo "$WATCHER_CONFIG_TEMPLATE" | \
+  sed -E "s|REPLACE_WITH_CERC_RELAY_PEERS|${CERC_RELAY_PEERS}|g; \
+    s|REPLACE_WITH_CERC_DENY_MULTIADDRS|${CERC_DENY_MULTIADDRS}|g; \
+    s/REPLACE_WITH_CERC_PUBSUB/${CERC_PUBSUB}/g; \
+    s/REPLACE_WITH_CERC_RELAY_ANNOUNCE_DOMAIN/${CERC_RELAY_ANNOUNCE_DOMAIN}/g; \
+    s|REPLACE_WITH_CERC_RELAY_MULTIADDR|${CERC_RELAY_MULTIADDR}|g; \
+    s|REPLACE_WITH_PEER_ID_FILE|${PEER_ID_FILE}|g; \
+    s/REPLACE_WITH_CERC_ENABLE_PEER_L2_TXS/${CERC_ENABLE_PEER_L2_TXS}/g; \
+    s/REPLACE_WITH_CERC_PRIVATE_KEY_PEER/${CERC_PRIVATE_KEY_PEER}/g; \
+    s/REPLACE_WITH_CERC_WATCHER_NITRO_PK/${CERC_WATCHER_NITRO_PK}/g; \
+    s/REPLACE_WITH_CONTRACT_ADDRESS/${CONTRACT_ADDRESS}/g; \
+    s|REPLACE_WITH_CERC_NITRO_CHAIN_URL|${CERC_NITRO_CHAIN_URL}|g; \
+    s/REPLACE_WITH_CONSENSUS_ENABLED/${CONSENSUS_ENABLED}/g; \
+    s/REPLACE_WITH_CONSENSUS_PUBLIC_KEY/${CONSENSUS_PUBLIC_KEY}/g; \
+    s/REPLACE_WITH_CONSENSUS_PRIVATE_KEY/${CONSENSUS_PRIVATE_KEY}/g; \
+    s|REPLACE_WITH_WATCHER_PARTY_PEERS_FILE|${WATCHER_PARTY_PEERS_FILE}|g; \
+    s|REPLACE_WITH_CERC_ETH_RPC_QUERY_ENDPOINT|${CERC_ETH_RPC_QUERY_ENDPOINT}|g; \
+    s|REPLACE_WITH_CERC_ETH_RPC_MUTATION_ENDPOINT|${CERC_ETH_RPC_MUTATION_ENDPOINT}|g; \
+    s/REPLACE_WITH_UPSTREAM_NITRO_ADDRESS/${UPSTREAM_NITRO_ADDRESS}/g; \
+    s|REPLACE_WITH_UPSTREAM_NITRO_MULTIADDR|${UPSTREAM_NITRO_MULTIADDR}|g; \
+    s/REPLACE_WITH_UPSTREAM_NITRO_PAY_AMOUNT/${UPSTREAM_NITRO_PAY_AMOUNT}/ ")
+
+# Write the modified content to a new file
+echo "$WATCHER_CONFIG" > environments/local.toml
+
+echo 'yarn server'
+yarn server
@@ -0,0 +1,14 @@
+freeQueriesLimit = 10
+
+freeQueriesList = []
+
+[queries]
+  multiNonce = '50'
+  _owner = '50'
+  isRevoked = '50'
+  isPhisher = '50'
+  isMember = '50'
+
+[mutations]
+  invoke = '100'
+  revoke = '100'
@@ -0,0 +1,123 @@
+[server]
+  host = "0.0.0.0"
+  port = 3001
+  kind = "lazy"
+
+  # Checkpointing state.
+  checkpointing = true
+
+  # Checkpoint interval in number of blocks.
+  checkpointInterval = 2000
+
+  # Enable state creation
+  enableState = true
+
+  # Boolean to filter logs by contract.
+  filterLogs = true
+
+  # Max block range for which to return events in eventsInRange GQL query.
+  # Use -1 for skipping check on block range.
+  maxEventsBlockRange = -1
+
+  # Flag to specify whether RPC endpoint supports block hash as block tag parameter
+  rpcSupportsBlockHashParam = true
+
+  [server.p2p]
+    enableRelay = true
+    enablePeer = true
+
+    [server.p2p.relay]
+      host = "0.0.0.0"
+      port = 9090
+      relayPeers = REPLACE_WITH_CERC_RELAY_PEERS
+      denyMultiaddrs = REPLACE_WITH_CERC_DENY_MULTIADDRS
+      peerIdFile = './peers/relay-id.json'
+      announce = 'REPLACE_WITH_CERC_RELAY_ANNOUNCE_DOMAIN'
+      pubsub = 'REPLACE_WITH_CERC_PUBSUB'
+      enableDebugInfo = true
+
+    [server.p2p.peer]
+      relayMultiaddr = 'REPLACE_WITH_CERC_RELAY_MULTIADDR'
+      pubSubTopic = 'mobymask'
+      denyMultiaddrs = REPLACE_WITH_CERC_DENY_MULTIADDRS
+      peerIdFile = 'REPLACE_WITH_PEER_ID_FILE'
+      pubsub = 'REPLACE_WITH_CERC_PUBSUB'
+      enableDebugInfo = true
+      enableL2Txs = REPLACE_WITH_CERC_ENABLE_PEER_L2_TXS
+      pingInterval = 4000
+      pingTimeout = 1500
+      maxRelayConnections = 10
+
+      [server.p2p.peer.l2TxsConfig]
+        privateKey = 'REPLACE_WITH_CERC_PRIVATE_KEY_PEER'
+        contractAddress = 'REPLACE_WITH_CONTRACT_ADDRESS'
+
+    [server.p2p.nitro]
+      chainUrl = 'REPLACE_WITH_CERC_NITRO_CHAIN_URL'
+      store = './out/nitro-db'
+      privateKey = 'REPLACE_WITH_CERC_WATCHER_NITRO_PK'
+      chainPrivateKey = 'REPLACE_WITH_CERC_PRIVATE_KEY_PEER'
+
+      [server.p2p.nitro.payments]
+        ratesFile = './environments/rates.toml'
+        requestTimeoutInSecs = 10
+
+        [server.p2p.nitro.payments.cache]
+          maxAccounts = 1000
+          accountTTLInSecs = 1800
+          maxVouchersPerAccount = 1000
+          voucherTTLInSecs = 300
+          maxPaymentChannels = 10000
+          paymentChannelTTLInSecs = 1800
+
+    [server.p2p.consensus]
+      enabled = REPLACE_WITH_CONSENSUS_ENABLED
+      publicKey = 'REPLACE_WITH_CONSENSUS_PUBLIC_KEY'
+      privateKey = 'REPLACE_WITH_CONSENSUS_PRIVATE_KEY'
+      watcherPartyPeersFile = 'REPLACE_WITH_WATCHER_PARTY_PEERS_FILE'
+
+[metrics]
+  host = "0.0.0.0"
+  port = 9000
+  [metrics.gql]
+    port = 9001
+
+[database]
+  type = "postgres"
+  host = "mobymask-watcher-db"
+  port = 5432
+  database = "mobymask-watcher"
+  username = "vdbm"
+  password = "password"
+  synchronize = true
+  logging = false
+
+[upstream]
+  [upstream.ethServer]
+    gqlApiEndpoint = "http://ipld-eth-server:8083/graphql"
+    rpcProviderEndpoint = 'REPLACE_WITH_CERC_ETH_RPC_QUERY_ENDPOINT'
+    rpcProviderMutationEndpoint = 'REPLACE_WITH_CERC_ETH_RPC_MUTATION_ENDPOINT'
+
+    [upstream.ethServer.payments]
+      paidRPCMethods = ["eth_getBlockByHash", "eth_getBlockByNumber", "eth_getStorageAt"]
+      amount = 'REPLACE_WITH_UPSTREAM_NITRO_PAY_AMOUNT'
+
+      [upstream.ethServer.payments.nitro]
+        address = 'REPLACE_WITH_UPSTREAM_NITRO_ADDRESS'
+        multiAddr = 'REPLACE_WITH_UPSTREAM_NITRO_MULTIADDR'
+
+        [upstream.ethServer.payments.nitro.fundingAmounts]
+          directFund = "1000000000000"
+          virtualFund = "1000000000"
+
+  [upstream.cache]
+    name = "requests"
+    enabled = false
+    deleteOnStart = false
+
+[jobQueue]
+  dbConnectionString = "postgres://vdbm:password@mobymask-watcher-db/mobymask-watcher-job-queue"
+  maxCompletionLagInSecs = 300
+  jobDelayInMilliSecs = 100
+  eventsInBatch = 50
+  blockDelayInMilliSecs = 60000
@@ -1,7 +1,7 @@
 #!/bin/bash
 # Usage: build-npm-package-local-dependencies.sh <registry-url> <publish-with-this-version>
 # Runs build-npm-package.sh after first fixing up yarn.lock to use a local
-# npm registry for all packages in a specific scope (currently @cerc-io, @lirewine and @muknsys)
+# npm registry for all packages in a specific scope (currently @cerc-io and @lirewine)
 if [ -n "$CERC_SCRIPT_DEBUG" ]; then
    set -x
 fi
@@ -18,7 +18,7 @@ set -e
 local_npm_registry_url=$1
 package_publish_version=$2
 # If we need to handle an additional scope, add it to the list below:
-npm_scopes_to_handle=("@cerc-io" "@lirewine" "@muknsys")
+npm_scopes_to_handle=("@cerc-io" "@lirewine")
 for npm_scope_for_local in ${npm_scopes_to_handle[@]}
 do
    # We need to configure the local registry
@@ -24,7 +24,6 @@ package_name=$( cat package.json | jq -r .name )
 local_npm_registry_url=$1
 npm config set @cerc-io:registry ${local_npm_registry_url}
 npm config set @lirewine:registry ${local_npm_registry_url}
-npm config set @muknsys:registry ${local_npm_registry_url}
 # Workaround bug in npm unpublish where it needs the url to be of the form //<foo> and not http://<foo>
 local_npm_registry_url_fixed=$( echo ${local_npm_registry_url} | sed -e 's/^http[s]\{0,1\}://')
 npm config set -- ${local_npm_registry_url_fixed}:_authToken ${CERC_NPM_AUTH_TOKEN}
@@ -13,6 +13,7 @@ NOW=${1:-`date +%s`}

 lcli \
  change-genesis-time \
+  --testnet-dir $TESTNET_DIR \
  $TESTNET_DIR/genesis.ssz \
  $NOW

@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+# Build cerc/go-nitro
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+docker build -t cerc/go-nitro:local -f ${CERC_REPO_BASE_DIR}/go-nitro/docker/local/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/go-nitro
@@ -0,0 +1,13 @@
+FROM node:18.15.0-alpine3.16
+
+RUN apk --update --no-cache add git python3 alpine-sdk bash
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies..." && \
+  yarn install && \
+  cd packages/snap
+
+CMD ["bash", "-c", "yarn start"]
@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+# Build cerc/mobymask-snap
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/mobymask-snap:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/mobymask-snap
@@ -1,6 +1,6 @@
 # Originally from: https://github.com/devcontainers/images/blob/main/src/javascript-node/.devcontainer/Dockerfile
 # [Choice] Node.js version (use -bullseye variants on local arm64/Apple Silicon): 18, 16, 14, 18-bullseye, 16-bullseye, 14-bullseye, 18-buster, 16-buster, 14-buster
-ARG VARIANT=16-bullseye
+ARG VARIANT=18-bullseye
 FROM node:${VARIANT}

 ARG USERNAME=node
@@ -37,7 +37,7 @@ RUN yarn global add http-server

 WORKDIR /app
 COPY . .
-RUN npm install
+RUN yarn install

 # Expose port for http
 EXPOSE 80
@@ -0,0 +1,12 @@
+FROM node:18.17.1-alpine3.18
+
+RUN apk --update --no-cache add python3 alpine-sdk bash curl jq
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies" && \
+  yarn && yarn build:node
+
+WORKDIR /app/packages/nitro-node
@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/nitro-contracts
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/nitro-contracts:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/ts-nitro
@@ -0,0 +1,12 @@
+FROM node:18.17.1-alpine3.18
+
+RUN apk --update --no-cache add python3 alpine-sdk bash curl jq
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies" && \
+  yarn
+
+RUN cd packages/nitro-rpc-client
@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/nitro-rpc-client
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/nitro-rpc-client:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/go-nitro
@@ -1,10 +1,8 @@
 #!/usr/bin/env bash
 # Build cerc/plugeth-statediff
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
+# Pass Go auth token if present
+if [[ -n "${CERC_GO_AUTH_TOKEN}" ]]; then
+    build_command_args="${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN}"
 fi
-docker build -t cerc/plugeth-statediff:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth-statediff
+docker build -t cerc/plugeth-statediff:local ${build_command_args} ${CERC_REPO_BASE_DIR}/plugeth-statediff
@@ -1,10 +1,8 @@
 #!/usr/bin/env bash
 # Build cerc/plugeth
 source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
+# Pass Go auth token if present
+if [[ -n "${CERC_GO_AUTH_TOKEN}" ]]; then
+    build_command_args="${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN}"
 fi
-docker build -t cerc/plugeth:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth
+docker build -t cerc/plugeth:local ${build_command_args} ${CERC_REPO_BASE_DIR}/plugeth
@@ -0,0 +1,13 @@
+FROM node:18.15.0-alpine3.16
+
+RUN apk --update --no-cache add git alpine-sdk bash jq curl
+RUN curl -L https://unpkg.com/@pnpm/self-installer | node
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Installing dependencies and building..." && \
+  pnpm install && pnpm build && \
+  cd examples/token-erc20 && \
+  pnpm install
@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+
+# Build cerc/ponder
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/ponder:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/ponder
@@ -14,6 +14,8 @@ else
    echo "Filesystem is fresh"
    echo `date` > $EXISTSFILENAME
 fi
-
+if [ -n "$CERC_TEST_PARAM_1" ]; then
+  echo "Test-param-1: ${CERC_TEST_PARAM_1}"
+fi
 # Run nginx which will block here forever
 /usr/sbin/nginx -g "daemon off;"
@@ -6,4 +6,4 @@ source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
 # See: https://stackoverflow.com/a/246128/1701505
 SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )

-docker build -t cerc/watcher-erc20:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/erc20-watcher-ts
+docker build -t cerc/watcher-erc20:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/watcher-ts
@@ -0,0 +1,20 @@
+FROM ubuntu:22.04
+
+RUN apt-get update \
+  && apt-get install -y curl wget gnupg build-essential \
+  && curl --silent --location https://deb.nodesource.com/setup_18.x | bash - \
+  && apt-get update \
+  && apt-get install -y nodejs git busybox jq \
+  && node -v
+
+RUN corepack enable \
+  && yarn --version
+
+WORKDIR /app
+
+COPY . .
+
+RUN echo "Building mobymask-v2-watcher-ts" && \
+  yarn && yarn build
+
+WORKDIR /app
@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# Build cerc/watcher-mobymask-v3
+
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+
+# See: https://stackoverflow.com/a/246128/1701505
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+docker build -t cerc/watcher-mobymask-v3:local -f ${SCRIPT_DIR}/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/mobymask-v2-watcher-ts
@@ -1,4 +1,4 @@
-FROM node:16.17.1-alpine3.16
+FROM node:18.17.1-alpine3.18

 RUN apk --update --no-cache add git python3 alpine-sdk jq

@@ -14,6 +14,7 @@ cerc/laconic-registry-cli
 cerc/laconic-console-host
 cerc/fixturenet-eth-geth
 cerc/fixturenet-eth-lighthouse
+cerc/fixturenet-eth-genesis
 cerc/watcher-ts
 cerc/watcher-mobymask
 cerc/watcher-erc20
@@ -50,3 +51,9 @@ cerc/watcher-sushiswap
 cerc/graph-node
 cerc/sushiswap-subgraphs
 cerc/webapp-base
+cerc/watcher-mobymask-v3
+cerc/go-nitro
+cerc/nitro-contracts
+cerc/mobymask-snap
+cerc/ponder
+cerc/nitro-rpc-client
@@ -35,3 +35,11 @@ contract-sushiswap
 graph-node
 sushiswap-subgraph-v3
 fixturenet-sushiswap-subgraph-v3
+watcher-mobymask-v3
+mobymask-app-v3
+go-nitro
+nitro-rpc-client
+nitro-contracts
+nitro-reverse-payment-proxy
+mobymask-snap
+ponder
@@ -1,7 +1,7 @@
-github.com/cerc-io/ipld-eth-db
-github.com/cerc-io/go-ethereum
-github.com/cerc-io/ipld-eth-server
-github.com/cerc-io/eth-statediff-service
+git.vdb.to/cerc-io/ipld-eth-db
+git.vdb.to/cerc-io/go-ethereum
+git.vdb.to/cerc-io/ipld-eth-server
+git.vdb.to/cerc-io/eth-statediff-service
 github.com/cerc-io/eth-statediff-fill-service
 github.com/cerc-io/ipld-eth-db-validator
 github.com/cerc-io/ipld-eth-beacon-indexer
@@ -18,7 +18,7 @@ github.com/vulcanize/uniswap-watcher-ts
 github.com/vulcanize/uniswap-v3-info
 github.com/vulcanize/assemblyscript
 github.com/cerc-io/eth-probe
-github.com/cerc-io/tx-spammer
+git.vdb.to/cerc-io/tx-spammer
 github.com/dboreham/foundry
 github.com/lirewine/gem
 github.com/lirewine/debug
@@ -30,7 +30,7 @@ github.com/ethereum-optimism/optimism
 github.com/pokt-network/pocket-core
 github.com/pokt-network/pocket-core-deployments
 github.com/cerc-io/azimuth-watcher-ts
-github.com/cerc-io/ipld-eth-state-snapshot
+git.vdb.to/cerc-io/ipld-eth-state-snapshot
 github.com/cerc-io/gelato-watcher-ts
 github.com/filecoin-project/lotus
 git.vdb.to/cerc-io/test-project
@@ -43,3 +43,7 @@ github.com/cerc-io/sushiswap-v3-core
 github.com/cerc-io/sushiswap-v3-periphery
 github.com/graphprotocol/graph-node
 github.com/sushiswap/subgraphs
+github.com/cerc-io/go-nitro
+github.com/cerc-io/ts-nitro
+github.com/cerc-io/mobymask-snap
+github.com/cerc-io/ponder
@@ -2,10 +2,10 @@ version: "1.0"
 name: chain-chunker
 description: "Stack to build containers for chain-chunker"
 repos:
-  - github.com/cerc-io/ipld-eth-state-snapshot@v5
-  - github.com/cerc-io/eth-statediff-service@v5
-  - github.com/cerc-io/ipld-eth-db@v5
-  - github.com/cerc-io/ipld-eth-server@v5
+  - git.vdb.to/cerc-io/ipld-eth-state-snapshot@v5
+  - git.vdb.to/cerc-io/eth-statediff-service@v5
+  - git.vdb.to/cerc-io/ipld-eth-db@v5
+  - git.vdb.to/cerc-io/ipld-eth-server@v5
 containers:
  - cerc/ipld-eth-state-snapshot
  - cerc/eth-statediff-service
@@ -1,10 +1,10 @@
 version: "1.0"
 name: erc20-watcher
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/ipld-eth-db
-  - github.com/cerc-io/ipld-eth-server
-  - github.com/cerc-io/erc20-watcher-ts
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/ipld-eth-db@v5
+  - git.vdb.to/cerc-io/ipld-eth-server@v1.11.6-statediff-v5
+  - github.com/cerc-io/watcher-ts
  - github.com/dboreham/foundry
 containers:
  - cerc/foundry
@@ -1,9 +1,9 @@
 version: "1.0"
 name: erc721-watcher
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/ipld-eth-db
-  - github.com/cerc-io/ipld-eth-server
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/ipld-eth-db@v5
+  - git.vdb.to/cerc-io/ipld-eth-server@v1.11.6-statediff-v5
  - github.com/cerc-io/watcher-ts
 containers:
  - cerc/go-ethereum
@@ -2,11 +2,11 @@ version: "1.0"
 name: fixturenet-eth-loaded
 description: "Loaded Ethereum Fixturenet"
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/tx-spammer
-  - github.com/cerc-io/ipld-eth-server
-  - github.com/cerc-io/ipld-eth-db
-  - github.com/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/tx-spammer
+  - git.vdb.to/cerc-io/ipld-eth-server@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/ipld-eth-db@v5
+  - git.vdb.to/cerc-io/lighthouse
 containers:
  - cerc/go-ethereum
  - cerc/lighthouse
@@ -2,10 +2,10 @@ version: "1.2"
 name: fixturenet-eth-tx
 description: "Ethereum Fixturenet w/ tx-spammer"
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/tx-spammer
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/tx-spammer
+  - git.vdb.to/cerc-io/lighthouse
  - github.com/dboreham/foundry
-  - github.com/cerc-io/lighthouse
 containers:
  - cerc/go-ethereum
  - cerc/lighthouse
@@ -66,7 +66,7 @@ It is not necessary to use them all at once, but a complete example follows:

 ```
 # Setup
-$ laconic-so setup-repositories --include github.com/cerc-io/go-ethereum,github.com/cerc-io/ipld-eth-db,github.com/cerc-io/ipld-eth-server,github.com/cerc-io/ipld-eth-beacon-db,github.com/cerc-io/ipld-eth-beacon-indexer,github.com/cerc-io/eth-probe,github.com/cerc-io/tx-spammer
+$ laconic-so setup-repositories --include git.vdb.to/cerc-io/go-ethereum,git.vdb.to/cerc-io/ipld-eth-db,git.vdb.to/cerc-io/ipld-eth-server,github.com/cerc-io/ipld-eth-beacon-db,github.com/cerc-io/ipld-eth-beacon-indexer,github.com/cerc-io/eth-probe,git.vdb.to/cerc-io/tx-spammer

 # Build
 $ laconic-so build-containers --include cerc/go-ethereum,cerc/lighthouse,cerc/fixturenet-eth-geth,cerc/fixturenet-eth-lighthouse,cerc/ipld-eth-db,cerc/ipld-eth-server,cerc/ipld-eth-beacon-db,cerc/ipld-eth-beacon-indexer,cerc/eth-probe,cerc/keycloak,cerc/tx-spammer
@@ -2,8 +2,8 @@ version: "1.1"
 name: fixturenet-eth
 description: "Ethereum Fixturenet"
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/lighthouse
  - github.com/dboreham/foundry
 containers:
  - cerc/go-ethereum
@@ -1,3 +0,0 @@
-# Graph-Node Fixturenet
-
-Experimental
@@ -1,12 +0,0 @@
-version: "1.0"
-name: fixturenet-graph-node
-description: "A graph-node fixturenet"
-repos:
-  - github.com/filecoin-project/lotus
-  - github.com/graphprotocol/graph-node
-containers:
-  - cerc/lotus
-  - cerc/graph-node
-pods:
-  - fixturenet-lotus
-  - graph-node
@@ -4,6 +4,8 @@ Testing a "Loaded" fixturenet with console.

 Instructions for deploying a local Laconic blockchain "fixturenet" for development and testing purposes using laconic-stack-orchestrator.

+**Note:** For building some NPMs, access to the @lirewine repositories is required. If you don't have access, see [this tutorial](/docs/laconicd-fixturenet.md) to run this stack
+
 ## 1. Install Laconic Stack Orchestrator
 Installation is covered in detail [here](https://github.com/cerc-io/stack-orchestrator#user-mode) but if you're on Linux and already have docker installed it should be as simple as:
 ```
@@ -30,24 +32,24 @@ $ export CERC_NPM_AUTH_TOKEN=<my-token>

 ## 3. Clone required repositories
 ```
-$ laconic-so --stack fixturenet-laconicd setup-repositories
+$ laconic-so --stack fixturenet-laconic-loaded setup-repositories
 ```
 ## 4. Build the stack's packages and containers
 ```
-$ laconic-so --stack fixturenet-laconicd build-npms
-$ laconic-so --stack fixturenet-laconicd build-containers
+$ laconic-so --stack fixturenet-laconic-loaded build-npms
+$ laconic-so --stack fixturenet-laconic-loaded build-containers
 ```
 ## 5. Deploy the stack
 ```
-$ laconic-so --stack fixturenet-laconicd deploy up
+$ laconic-so --stack fixturenet-laconic-loaded deploy up
 ```
 Correct operation should be verified by checking the laconicd container's logs with:
 ```
-$ laconic-so --stack fixturenet-laconicd deploy logs
+$ laconic-so --stack fixturenet-laconic-loaded deploy logs
 ```
 ## 6. Test with the Registry CLI
 ```
-$ laconic-so --stack fixturenet-laconicd deploy exec cli "laconic cns status"
+$ laconic-so --stack fixturenet-laconic-loaded deploy exec cli "laconic cns status"
 ```
 ## 7. View the laconic console
 Get the URL for the console web app with this command (the port number will be different for each deployment):
@@ -9,7 +9,7 @@ Prerequisite: An L1 Ethereum RPC endpoint
 Clone required repositories:

 ```bash
-laconic-so --stack fixturenet-optimism setup-repositories --exclude github.com/cerc-io/go-ethereum
+laconic-so --stack fixturenet-optimism setup-repositories --exclude git.vdb.to/cerc-io/go-ethereum

 # If this throws an error as a result of being already checked out to a branch/tag in a repo, remove the repositories mentioned below and re-run the command
 ```
@@ -2,8 +2,8 @@ version: "1.0"
 name: fixturenet-optimism
 description: "Optimism Fixturenet"
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/lighthouse
  - github.com/dboreham/foundry
  - github.com/ethereum-optimism/optimism@v1.0.4
  - github.com/ethereum-optimism/op-geth@v1.101105.2
@@ -0,0 +1,58 @@
+# fixturenet-payments
+
+Instructions to setup and deploy an end-to-end fixturenet-payments stack
+
+## Setup
+
+Clone required repositories:
+
+```bash
+laconic-so --stack fixturenet-payments setup-repositories --pull
+```
+
+Build the container images:
+
+```bash
+laconic-so --stack fixturenet-payments build-containers
+```
+
+## Deploy
+
+Deploy the stack:
+
+```bash
+laconic-so --stack fixturenet-payments deploy --cluster payments up
+
+# Exposed on host ports:
+# 4005: go-nitro node's RPC endpoint
+# 5005: go-nitro node's p2p endpoint
+# 8081: reverse payment proxy's RPC endpoint
+# 15432: MobyMask v3 watcher's db endpoint
+# 3001: MobyMask v3 watcher endpoint
+# 9090: MobyMask v3 watcher relay node endpoint
+# 8080: MobyMask snap
+# 3004: MobyMask v3 app
+# 32***: geth in statediffing mode
+```
+
+## Demo
+
+Follow the [demo](./demo.md) to try out end-to-end payments
+
+## Clean up
+
+Stop all the services running in background:
+
+```bash
+laconic-so --stack fixturenet-payments deploy --cluster payments down 30
+```
+
+Clear volumes created by this stack:
+
+```bash
+# List all relevant volumes
+docker volume ls -q --filter "name=payments"
+
+# Remove all the listed volumes
+docker volume rm $(docker volume ls -q --filter "name=payments")
+```
@@ -0,0 +1,315 @@
+# Demo
+
+Stack components:
+* `ipld-eth-db` database for statediffed data
+* Local geth + lighthouse blockchain "fixturenet" running in statediffing mode
+* `ipld-eth-server` which runs an ETH RPC API and a GQL server; serves data from `ipld-eth-db`; also runs an in-process go-nitro node for payments required for configured RPC requests
+* A MobyMask v3 watcher that pays the `ipld-eth-server` for ETH RPC requests
+* A MobyMask v3 app that pays the watcher for reads (GQL queries) and writes
+* An example ERC20 Ponder indexer app that pays the `ipld-eth-server` for ETH RPC requests
+* An example ERC20 Ponder watcher app that pays the Ponder indexer app for GQL queries
+
+## Setup
+
+* On starting the stack, MobyMask watcher creates a payment channel with the `ipld-eth-server`'s Nitro node. Check watcher logs and wait for the same:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="mobymask-watcher-server")
+
+  # Expected output:
+  # vulcanize:server Peer ID: 12D3KooWKLqLWU82VU7jmsmQMruRvZWhoBoVsf1UHchM5Nuq9ymY
+  # vulcanize:server Using chain URL http://fixturenet-eth-geth-1:8546 for Nitro node
+  # ...
+  # ts-nitro:util:nitro Ledger channel created with id 0x65703ccdfacab09ac35367bdbe6c5a337e7a6651aad526807607b1c59b28bc1e
+  # ...
+  # ts-nitro:util:nitro Virtual payment channel created with id 0x29ff1335d73391a50e8fde3e9b34f00c3d81c39ddc7f89187f44dd51df96140e
+  # vulcanize:server Starting server... +0ms
+  ```
+
+* Keep the above command running to keep track of incoming payments and GQL requests from the MobyMask app
+
+* In another terminal, export the payment channel id to a variable:
+
+  ```bash
+  export WATCHER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
+  ```
+
+* Check the payment channel status:
+
+  ```bash
+  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -h ipld-eth-server -p 4005"
+
+  # Expected output:
+  # {
+  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
+  #   Status: 'Open',
+  #   Balance: {
+  #     AssetAddress: '0x0000000000000000000000000000000000000000',
+  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
+  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
+  #     PaidSoFar: 0n,
+  #     RemainingFunds: 1000000000n
+  #   }
+  # }
+  ```
+
+* In another terminal, check `ipld-eth-server`'s logs to keep track of incoming payments and RPC requests:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="ipld-eth-server")
+  ```
+
+* MetaMask flask wallet setup for running the MobyMask app:
+
+  * Get the geth node’s port mapped to host:
+
+    ```bash
+    docker port payments-fixturenet-eth-geth-1-1 8545
+    ```
+
+  * In MetaMask, add a custom network with the following settings:
+
+    ```bash
+    # Network name
+    Local fixturenet
+
+    # New RPC URL
+    http://127.0.0.1:<GETH_PORT>
+
+    # Chain ID
+    1212
+
+    # Currency symbol
+    ETH
+    ```
+
+  * Import a faucet account with the following private key:
+
+    ```bash
+    # Faucet PK
+    # 0x570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597
+    ```
+
+  * Create an additional account for usage in the app; fund it from the faucet account
+
+* Get the generated root invite link for MobyMask from contract deployment container logs:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="mobymask-1")
+
+  # Expected output:
+  # ...
+  #   "key": "0x60e706fda4639fe0a8eb102cb0ce81231cf6e819f41cb4eadf72d865ea4c11ad"
+  # }
+  # http://127.0.0.1:3004/#/members?invitation=<INVITATION>
+  ```
+
+## Run
+
+### MobyMask App
+
+* Open app in a browser (where MetaMask was setup) using the invite link
+
+* Run the following in browser console to enable logs:
+
+  ```bash
+  localStorage.debug = 'ts-nitro:*'
+  # Refresh the tab for taking effect
+  ```
+
+* In the app’s debug panel, check that the peer gets connected to relay node and watcher peer
+
+* Open the `NITRO` tab in debug panel
+  * Click on `Connect Wallet` to connect to MetaMask (make sure that the newly funded account is active)
+  * Click on `Connect Snap` to install/connect snap
+
+* Perform `DIRECT FUND` with the preset amount and wait for the MetaMask confirmation prompt to appear; confirm the transaction and wait for a ledger channel to be created with the watcher
+
+* Perform `VIRTUAL FUND` with amount set to `10000` and wait for a payment channel to be created with the watcher
+
+* Perform phisher status check queries now that a payment channel is created:
+
+  * Check the watcher logs for received payments along with the GQL queries:
+
+    ```bash
+    # Expected output:
+    # ...
+    # laconic:payments Serving a paid query for 0x86804299822212c070178B5135Ba6DdAcFC357D3
+    # vulcanize:resolver isPhisher 0x98ae4f9e9d01cc892adfe6871e1db0287039e0c183d3b5bb31d724228c114744 0x2B6AFbd4F479cE4101Df722cF4E05F941523EaD9 TWT:ash1
+    # vulcanize:indexer isPhisher: db miss, fetching from upstream server
+    # laconic:payments Making RPC call: eth_chainId
+    # laconic:payments Making RPC call: eth_getBlockByHash
+    # 2023-10-13T06:33:58.443Z ts-nitro:engine{"msg":"Sent message","_msg":{"to":"0xAAA662","from":"0xBBB676", "payloadSummaries":[],"proposalSummaries":[],"payments":[{"amount":200,"channelId":"0x9a4bdfe03c8e72f368aab07e6bd18f1cd6821170e1a93e59864aad6ee6a853a2"}],"rejectedObjectives":[]}}
+    # laconic:payments Making RPC call: eth_chainId
+    # laconic:payments Making RPC call: eth_getStorageAt
+    # 2023-10-13T06:34:00.483Z ts-nitro:engine {"msg":"Sent message","_msg":{"to":"0xAAA662","from":"0xBBB676",# "payloadSummaries":[],"proposalSummaries":[],"payments":[{"amount":300,"channelId":"0x9a4bdfe03c8e72f368aab07e6bd18f1cd6821170e1a93e59864aad6ee6a853a2"}],"rejectedObjectives":[]}}
+
+    ```
+
+  * The watcher makes several ETH RPC requests to `ipld-eth-server` to fetch data required for satisfying the GQL request(s); check `ipld-eth-server` logs for charged RPC requests (`eth_getBlockByHash`, `eth_getBlockByNumber`, `eth_getStorageAt`):
+
+    ```bash
+    # Expected output:
+    # ...
+    # 2023/10/13 06:34:57 INFO Received a voucher payer=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94 amount=100
+    #  2023/10/13 06:34:59 INFO Serving a paid RPC request method=eth_getBlockByHash sender=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94
+    #  time="2023-10-13T06:34:59Z" level=debug msg=START api_method=eth_getBlockByHash api_params="[0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d false]" api_reqid=52 conn="192.168.64.4:59644" user_id= uuid=a1893211-6992-11ee-a67a-0242c0a8400c
+    #  WARN [10-13|06:34:59.133] Attempting GerRPCCalls, but default PluginLoader has not been initialized
+    #  time="2023-10-13T06:34:59Z" level=debug msg=END api_method=eth_getBlockByHash api_params="[0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d false]" api_reqid=52 conn="192.168.64.4:59644" duration=5 user_id= uuid=a1893211-6992-11ee-a67a-0242c0a8400c
+    #  2023/10/13 06:34:59 INFO Serving a free RPC request method=eth_chainId
+    #  time="2023-10-13T06:34:59Z" level=debug msg=START api_method=eth_chainId api_params="[]" api_reqid=53 conn="192.168.64.4:59658" user_id= uuid=a18a96d9-6992-11ee-a67a-0242c0a8400c
+    #  time="2023-10-13T06:34:59Z" level=debug msg=END api_method=eth_chainId api_params="[]" api_reqid=53 conn="192.168.64.4:59658" duration=0 user_id= uuid=a18a96d9-6992-11ee-a67a-0242c0a8400c
+    #  2023/10/13 06:34:59 INFO Received a voucher payer=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94 amount=100
+    #  2023/10/13 06:35:01 INFO Serving a paid RPC request method=eth_getStorageAt sender=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94
+    #  time="2023-10-13T06:35:01Z" level=debug msg=START api_method=eth_getStorageAt api_params="[0x2b6afbd4f479ce4101df722cf4e05f941523ead9 0xf76621c2cc1c1705fabbc22d30ffc5ded7f26e4995feb8d1c9812a2697ba1278 0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d]" api_reqid=54 conn="192.168.64.4:59660" user_id= uuid=a2bd75d2-6992-11ee-a67a-0242c0a8400c
+    #  time="2023-10-13T06:35:01Z" level=debug msg=END api_method=eth_getStorageAt api_params="[0x2b6afbd4f479ce4101df722cf4e05f941523ead9 0xf76621c2cc1c1705fabbc22d30ffc5ded7f26e4995feb8d1c9812a2697ba1278 0x46411a554f30e607bdd79cd157a60a7c8b314c0709557be3357ed2fef53d6c3d]" api_reqid=54 conn="192.168.64.4:59660" duration=7 user_id= uuid=a2bd75d2-6992-11ee-a67a-0242c0a8400c
+    ```
+
+* Change the amount besides `PAY` button in debug panel to `>=100` for phisher reports next
+
+* Perform a phisher report and check the watcher logs for received payments:
+
+  ```bash
+  # Expected output:
+  # ...
+  # vulcanize:libp2p-utils [6:50:2] Received a message on mobymask P2P network from peer: 12D3KooWRkxV9SX8uTUZYkbRjai4Fsn7yavB61J5TMnksixsabsP
+  # ts-nitro:engine {"msg":"Received message","_msg":{"to":"0xBBB676","from":"0x868042","payloadSummaries":[],"proposalSummaries":[],"payments":[{"amount":200,"channelId":"0x557153d729cf3323c0bdb40a36b245f98c2d4562933ba2182c9d61c5cfeda948"}],"rejectedObjectives":[]}}
+  # laconic:payments Received a payment voucher of 100 from 0x86804299822212c070178B5135Ba6DdAcFC357D3
+  # vulcanize:libp2p-utils Payment received for a mutation request from 0x86804299822212c070178B5135Ba6DdAcFC357D3
+  # vulcanize:libp2p-utils Transaction receipt for invoke message {
+  #   to: '0x2B6AFbd4F479cE4101Df722cF4E05F941523EaD9',
+  #   blockNumber: 232,
+  #   blockHash: '0x6a188722c102662ea48af3786fe9db0d4b6c7ab7b27473eb0e628cf95746a244',
+  #   transactionHash: '0x6521205db8a905b3222adc2b6855f9b2abc72580624d299bec2a35bcba173efa',
+  #   effectiveGasPrice: '1500000007',
+  #   gasUsed: '113355'
+  # }
+  ```
+
+* Check the watcher - ipld-eth-server payment channel status after a few requests:
+
+  ```bash
+  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $WATCHER_UPSTREAM_PAYMENT_CHANNEL -h ipld-eth-server -p 4005"
+
+  # Expected output ('PaidSoFar' should be non zero):
+  # {
+  #   ID: '0x8c0d17639bd2ba07dbcd248304a8f3c6c7276bfe25c2b87fe41f461e20f33f01',
+  #   Status: 'Open',
+  #   Balance: {
+  #     AssetAddress: '0x0000000000000000000000000000000000000000',
+  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
+  #     Payer: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
+  #     PaidSoFar: 30000n,
+  #     RemainingFunds: 999970000n
+  #   }
+  # }
+  ```
+
+### ERC20 Ponder App
+
+* Run the ponder app in indexer mode:
+
+  ```bash
+  docker exec -it payments-ponder-app-indexer-1 bash -c "DEBUG=laconic:payments pnpm start"
+
+  # Expected output:
+  # 08:00:28.701 INFO  payment    Nitro node setup with address 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d
+  #   laconic:payments Starting voucher subscription... +0ms
+  # ...
+  # 09:58:54.288 INFO  payment    Creating ledger channel with nitro node 0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE
+  # ...
+  # 09:59:14.230 INFO  payment    Creating payment channel with nitro node 0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE
+  # ...
+  # 09:59:14.329 INFO  payment    Using payment channel 0x10f049519bc3f862e2b26e974be8666886228f30ea54aab06e2f23718afffab0
+  ```
+
+* Export the payment channel id to a variable:
+
+  ```bash
+  export PONDER_UPSTREAM_PAYMENT_CHANNEL=<PAYMENT_CHANNEL_ID>
+  ```
+
+* On starting the Ponder app in indexer mode, it creates a payment channel with the `ipld-eth-server`'s Nitro node and then starts the historical sync service
+
+* The sync service makes several ETH RPC requests to the `ipld-eth-server` to fetch required data; check the `ipld-eth-server` logs for charged RPC requests (`eth_getBlockByNumber`, `eth_getLogs`):
+
+  ```bash
+  # Expected output:
+  # ...
+  #  2023/10/13 06:59:49 INFO Received a voucher payer=0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d amount=100
+  #  time="2023-10-13T06:59:51Z" level=debug msg=START api_method=eth_getLogs api_params="[map[address:0x32353a6c91143bfd6c7d363b546e62a9a2489a20 fromBlock:0x5 toBlock:0x68]]" api_reqid=1 conn="192.168.64.2:55578" user_id= uuid=1aedde38-6996-11ee-a67a-0242c0a8400c
+  #  2023/10/13 06:59:51 INFO Serving a paid RPC request method=eth_getLogs sender=0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d
+  #  WARN [10-13|06:59:51.287] Attempting GerRPCCalls, but default PluginLoader has not been initialized
+  #  time="2023-10-13T06:59:51Z" level=debug msg="retrieving log cids for receipt ids"
+  #  time="2023-10-13T06:59:51Z" level=debug msg=END api_method=eth_getLogs api_params="[map[address:0x32353a6c91143bfd6c7d363b546e62a9a2489a20 fromBlock:0x5 toBlock:0x68]]" api_reqid=1 conn="192.168.64.2:55578" duration=17 user_id= uuid=1aedde38-6996-11ee-a67a-0242c0a8400c
+  #  2023/10/13 06:59:51 INFO Received a voucher payer=0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d amount=100
+  #  2023/10/13 06:59:53 INFO Serving a paid RPC request method=eth_getBlockByNumber sender=0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d
+  #  2023/10/13 06:59:53 INFO Received a voucher payer=0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d amount=100
+
+  # ...
+  ```
+
+* Check the ponder - ipld-eth-server payment channel status:
+
+  ```bash
+  docker exec payments-nitro-rpc-client-1 npm exec -c "nitro-rpc-client get-payment-channel $PONDER_UPSTREAM_PAYMENT_CHANNEL -h ipld-eth-server -p 4005"
+
+  # Expected output ('PaidSoFar' is non zero):
+  # {
+  #   ID: '0x1178ac0f2a43e54a122216fa6afdd30333b590e49e50317a1f9274a591da0f96',
+  #   Status: 'Open',
+  #   Balance: {
+  #     AssetAddress: '0x0000000000000000000000000000000000000000',
+  #     Payee: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
+  #     Payer: '0x67d5b55604d1af90074fcb69b8c51838fff84f8d',
+  #     PaidSoFar: 215000n,
+  #     RemainingFunds: 999785000n
+  #   }
+  # }
+  ```
+
+* In another terminal run the ponder app in watcher mode:
+
+  ```bash
+  docker exec -it payments-ponder-app-watcher-1 bash -c "DEBUG=laconic:payments pnpm start"
+
+  # Expected output:
+  # 11:23:22.057 DEBUG app        Started using config file: ponder.config.ts
+  # 08:02:12.548 INFO  payment    Nitro node setup with address 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db
+  #   laconic:payments Starting voucher subscription... +0ms
+  # 08:02:17.417 INFO  payment    Creating ledger channel with nitro node 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d ...
+  # 08:02:37.135 INFO  payment    Creating payment channel with nitro node 0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d ...
+  # 08:02:37.313 INFO  payment    Using payment channel 0x4b8e67f6a6fcfe114fdd60b85f963344ece4c77d4eea3825688c74b45ff5509b
+  # ...
+  # 11:23:22.436 INFO  server     Started responding as healthy
+  ```
+
+* Check the terminal in which ponder is running in indexer mode. Logs of payment for `eth_getLogs` queries can be seen:
+
+  ```bash
+  # ...
+  # 08:02:37.763 DEBUG realtime   Finished processing new head block 89 (network=fixturenet)
+  #   laconic:payments Received a payment voucher of 50 from 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +444ms
+  #   laconic:payments Serving a paid query for 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +1ms
+  # 08:02:37.804 DEBUG payment    Verified payment for GQL queries getLogEvents
+  #   laconic:payments Received a payment voucher of 50 from 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +45ms
+  #   laconic:payments Serving a paid query for 0x111A00868581f73AB42FEEF67D235Ca09ca1E8db +0ms
+  # 08:02:37.849 DEBUG payment    Verified payment for GQL queries getLogEvents
+  ```
+
+## Clean Up
+
+* In the MobyMask app, perform `VIRTUAL DEFUND` and `DIRECT DEFUND` (in order) for closing the payment channel created with watcher
+
+* Run the following in the browser console to delete the Nitro node's data:
+
+  ```bash
+  await clearNodeStorage()
+  ```
+
+* Run the following in the browser console to clear data in local storage:
+  ```bash
+  localStorage.clear()
+  ```
+
+* On a fresh restart, clear activity tab data in MetaMask for concerned accounts
@@ -0,0 +1,54 @@
+version: "1.0"
+name: fixturenet-payments
+description: "Stack to demonstrate payments between various services"
+repos:
+  # fixturenet repos
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/ipld-eth-db@v5
+  - git.vdb.to/cerc-io/ipld-eth-server@payments
+  # nitro repo
+  - github.com/cerc-io/ts-nitro@v0.1.13
+  - github.com/cerc-io/go-nitro@v0.1.1-ts-port-0.1.7
+  # mobymask watcher repos
+  - github.com/cerc-io/watcher-ts@v0.2.65
+  - github.com/cerc-io/mobymask-v2-watcher-ts@v0.2.3
+  - github.com/cerc-io/MobyMask@v0.1.3
+  # mobymask app repos
+  - github.com/cerc-io/mobymask-snap
+  - github.com/cerc-io/mobymask-ui@v0.2.1
+  # ponder repo
+  - github.com/cerc-io/ponder@laconic-esm
+containers:
+  # fixturenet images
+  - cerc/go-ethereum
+  - cerc/lighthouse
+  - cerc/lighthouse-cli
+  - cerc/fixturenet-eth-genesis
+  - cerc/fixturenet-eth-geth
+  - cerc/fixturenet-eth-lighthouse
+  - cerc/ipld-eth-db
+  - cerc/ipld-eth-server
+  - cerc/nitro-contracts
+  # - cerc/go-nitro
+  - cerc/nitro-rpc-client
+  # mobymask watcher images
+  - cerc/watcher-ts
+  - cerc/watcher-mobymask-v3
+  - cerc/mobymask
+  # mobymask app images
+  - cerc/mobymask-snap
+  - cerc/mobymask-ui
+  # ponder image
+  - cerc/ponder
+pods:
+  - fixturenet-eth
+  - ipld-eth-server
+  - ipld-eth-db
+  - nitro-contracts
+  # - go-nitro
+  - nitro-rpc-client
+  - watcher-mobymask-v3
+  - mobymask-snap
+  - mobymask-app-v3
+  - ponder
@@ -12,7 +12,7 @@ See `stacks/fixturenet-eth/README.md` for more information.
 * cerc/tx-spammer

 ## Deploy the stack
-Note: since some Go dependencies are currently private, `CERC_GO_AUTH_TOKEN` must be set to a valid Gitea access token before running the `build-containers` command.
+Note: if there are any private Go dependencies, `CERC_GO_AUTH_TOKEN` must be set to a valid Gitea access token before running the `build-containers` command.
 ```
 $ laconic-so --stack fixturenet-plugeth-tx setup-repositories
 $ laconic-so --stack fixturenet-plugeth-tx build-containers
@@ -4,10 +4,10 @@ description: "plugeth Ethereum Fixturenet w/ tx-spammer"
 repos:
  - git.vdb.to/cerc-io/plugeth@statediff
  - git.vdb.to/cerc-io/plugeth-statediff
-  - github.com/cerc-io/lighthouse
-  - github.com/cerc-io/ipld-eth-db@v5
-  - github.com/cerc-io/ipld-eth-server@v5
-  - github.com/cerc-io/tx-spammer
+  - git.vdb.to/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/ipld-eth-db@v5
+  - git.vdb.to/cerc-io/ipld-eth-server@v5
+  - git.vdb.to/cerc-io/tx-spammer
  - github.com/dboreham/foundry
 containers:
  - cerc/plugeth-statediff
@@ -2,8 +2,8 @@ version: "1.0"
 name: fixturenet-pocket
 description: "A single node pocket chain that can serve relays from the geth-1 node in eth-fixturenet"
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/lighthouse
  - github.com/pokt-network/pocket-core
  - github.com/pokt-network/pocket-core-deployments # contains the dockerfile
 containers:
@@ -32,21 +32,10 @@ laconic-so --stack fixturenet-sushiswap-subgraph build-containers

 ## Deploy

-
-Create an env file with the following contents to be used in the next step:
-
-```bash
-# Network and ETH RPC endpoint to run graph-node against
-NETWORK=lotus-fixturenet
-ETH_RPC_ENDPOINT=http://lotus-node-1:1234/rpc/v1
-```
-
-Uncomment the dependency on `lotus-node-1` in the [graph-node compose file](../../compose/docker-compose-graph-node.yml)
-
 Deploy the stack:

 ```bash
-laconic-so --stack fixturenet-sushiswap-subgraph deploy --cluster sushigraph --env-file <PATH_TO_ENV_FILE> up
+laconic-so --stack fixturenet-sushiswap-subgraph deploy --cluster sushigraph up

 # Note: Remove any existing volumes for the cluster for a fresh start
 ```
@@ -154,6 +143,42 @@ http://127.0.0.1:<HOST_PORT>/subgraphs/name/sushiswap/v3-lotus/graphql
  docker exec -it sushigraph-sushiswap-v3-core-1 pnpm run pool:burn:docker --pool $POOL_ADDRESS --amount 10
  ```

+* Query the sushiswap v3-lotus subgraph GQL after running above commands
+
+  ```graphql
+  {
+    _meta {
+      block {
+        number
+      }
+      deployment
+      hasIndexingErrors
+    }
+    
+    factories {
+      poolCount
+      id
+    }
+    
+    pools {
+      id
+      token0 {
+        id
+        name
+        symbol
+      }
+      mints {
+        id
+        owner
+      }
+      burns {
+        id
+        owner
+      }
+    }
+  }
+  ```
+
 ## Clean up

 Stop all the services running in background run:
@@ -0,0 +1,157 @@
+# Graph Node
+
+## Setup
+
+Clone required repositories:
+
+```bash
+laconic-so --stack graph-node setup-repositories --pull
+```
+
+Checkout to a non-default branch in the cloned repos if required:
+
+```bash
+# Default repo base dir
+cd ~/cerc
+
+# Example
+cd graph-node
+git checkout <your-branch> && git pull
+
+# Remove the corresponding docker image if it already exists
+docker image rm cerc/graph-node:local
+# Remove any dangling images
+docker image prune
+```
+
+Build the container images:
+
+```bash
+laconic-so --stack graph-node build-containers
+```
+
+## Create a deployment
+
+Initialize deployment and create "spec" file:
+
+```bash
+laconic-so --stack graph-node deploy init --output graph-node-spec.yml
+```
+
+We need to assign fixed ports: `8000` for subgraph GQL endpoint, `8020` for subgraph deployment and `5001` for IPFS. The values can be
+customized by editing the "spec" file generated by `laconic-so deploy init`.
+```
+$ cat graph-node-spec.yml
+stack: graph-node
+ports:
+  graph-node:
+    - '8000:8000'
+    - '8001'
+    - '8020:8020'
+    - '8030'
+  ipfs:
+    - '8080'
+    - '4001'
+    - '5001:5001'
+...
+```
+
+Create deployment:
+
+```bash
+laconic-so deploy create --spec-file graph-node-spec.yml --deployment-dir graph-node-deployment
+```
+
+## Start the stack
+
+Create an env file with the following values to be set before starting the stack:
+
+```bash
+# Set ETH RPC endpoint the graph node will use
+
+# Host and port of the ETH RPC endpoint to check before starting graph-node
+export ETH_RPC_HOST=
+export ETH_RPC_PORT=
+
+# The etherum network(s) graph-node will connect to
+# Set this to a space-separated list of the networks where each entry has the form NAME:URL
+export ETH_NETWORKS=
+```
+
+Example env file:
+
+```bash
+export ETH_RPC_HOST=filecoin.chainup.net
+export ETH_RPC_PORT=443
+
+export ETH_NETWORKS=filecoin:https://filecoin.chainup.net/rpc/v1
+```
+
+Set the environment variables:
+
+```bash
+source <PATH_TO_ENV_FILE>
+```
+
+Deploy the stack:
+
+```bash
+laconic-so deployment --dir graph-node-deployment start
+
+# Note: Remove any existing volumes in the cluster for a fresh start
+```
+
+After all services have started, follow `graph-node` logs:
+
+```bash
+laconic-so deployment --dir graph-node-deployment logs -f graph-node
+```
+
+Subgraphs can now be deployed to the graph-node.
+Follow [Deploy the Subgraph](https://github.com/graphprotocol/graph-node/blob/v0.32.0/docs/getting-started.md#24-deploy-the-subgraph) section in graph-node docs for an existing subgraph.
+
+## Set environment variables
+
+* The graph-node environment variable `ETHEREUM_REORG_THRESHOLD` can be set in the deployment compose file
+  ```bash
+  $ cat graph-node-deployment/compose/docker-compose-graph-node.yml
+  services:
+    graph-node:
+      image: cerc/graph-node:local
+      ...
+      environment:
+        ...
+        GRAPH_LOG: debug
+        ETHEREUM_REORG_THRESHOLD: 3
+  ```
+  Change `ETHEREUM_REORG_THRESHOLD` to desired value
+
+  * To restart graph-node with updated values
+    * Stop the stack first
+      ```bash
+      laconic-so deployment --dir graph-node-deployment stop
+      ```
+    * Start the stack again
+      ```
+      laconic-so deployment --dir graph-node-deployment start
+      ```
+  * To check if environment variable has been updated in graph-node container
+      ```bash
+      $ laconic-so deployment --dir graph-node-deployment exec graph-node bash
+      root@dc4d3abe1615:/# echo $ETHEREUM_REORG_THRESHOLD
+      16
+      ```
+
+## Clean up
+
+Stop all the services running in background run:
+
+```bash
+laconic-so deployment --dir graph-node-deployment stop
+```
+
+Clear volumes created by this stack:
+
+```bash
+laconic-so deployment --dir graph-node-deployment stop --delete-volumes
+```
@@ -0,0 +1,68 @@
+# Deploying Subgraph
+
+## Setup
+
+We will use the [ethereum-gravatar](https://github.com/graphprotocol/graph-tooling/tree/%40graphprotocol/graph-cli%400.58.0/examples/ethereum-gravatar) example subgraph from `graphprotocol/graph-tooling` repo
+
+- Clone the repo
+  ```bash
+  git clone git@github.com:graphprotocol/graph-tooling.git
+  
+  cd graph-tooling
+  ```
+
+- Install dependencies
+  ```bash
+  pnpm install
+  ```
+
+- Change directory to example-subgraph
+  ```bash
+  cd examples/ethereum-gravatar
+  ```
+
+## Deploy
+
+The following steps should be similar for every subgraph
+
+- Change the network and address in `subgraph.yaml`
+  ```yaml
+  ...
+  dataSources:
+  - kind: ethereum/contract
+    name: Gravity
+    network: <NETWORK_NAME>
+    source:
+      address: '<CONTRACT_ADDRESS>'
+      abi: Gravity
+      startBlock: <START_BLOCK>
+  ...
+  ```
+  - `CONTRACT_ADDRESS` is the address of the deployed contract on the desired network
+  - `START_BLOCK` is the block number after which we want to process events
+  - `NETWORK_NAME` is the name of the network specified when deploying graph-node
+    - When deploying graph-node `ETH_NETWORKS` env is set to a space-separated list of the networks where each entry has the form `NAME:URL`
+    - The `NAME` can be used in subgraph to specify which network to use
+    - More details can be seen in [Start the stack](./README.md#start-the-stack) section
+
+- Build the subgraph
+  ```bash
+  pnpm codegen
+  pnpm build
+  ```
+
+- Create and deploy the subgraph
+  ```bash
+  pnpm graph create example --node <GRAPH_NODE_DEPLOY_ENDPOINT>
+  
+  pnpm graph deploy example --ipfs <GRAPH_NODE_IPFS_ENDPOINT> --node <GRAPH_NODE_DEPLOY_ENDPOINT>
+  ```
+  - `GRAPH_NODE_DEPLOY_ENDPOINT` and `GRAPH_NODE_IPFS_ENDPOINT` will be available after graph-node has been deployed
+  - More details can be seen in [Create a deployment](./README.md#create-a-deployment) section 
+
+- The subgraph GQL endpoint will be seen after deploy command runs successfully
+
+- To remove the subgraph
+  ```bash
+  pnpm graph remove --node <GRAPH_NODE_DEPLOY_ENDPOINT> example
+  ```
@@ -0,0 +1,9 @@
+version: "1.0"
+name: graph-node
+description: "Stack for running graph-node"
+repos:
+  - github.com/graphprotocol/graph-node
+containers:
+  - cerc/graph-node
+pods:
+  - graph-node
@@ -17,7 +17,7 @@ $ laconic-so --stack mainnet-eth build-containers
 ## Create a deployment

 ```
-$ laconic-so --stack mainnet-eth deploy init --output mainnet-eth-spec.yml
+$ laconic-so --stack mainnet-eth deploy init --map-ports-to-host any-same --output mainnet-eth-spec.yml
 $ laconic-so deploy create --spec-file mainnet-eth-spec.yml --deployment-dir mainnet-eth-deployment
 ```
 ## Start the stack
@@ -138,4 +138,4 @@ $ sudo du -h mainnet-eth-deployment/data/
 860G    mainnet-eth-deployment/data/mainnet_eth_geth_1_data/geth
 860G    mainnet-eth-deployment/data/mainnet_eth_geth_1_data
 885G    mainnet-eth-deployment/data/
-```
+```
@@ -1,13 +1,12 @@
-version: "1.1"
+version: "1.2"
 name: mainnet-eth
 description: "Ethereum Mainnet"
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/lighthouse
  - github.com/dboreham/foundry
  - git.vdb.to/cerc-io/keycloak-reg-api
  - git.vdb.to/cerc-io/keycloak-reg-ui
-  - github.com/vulcanize/eth-api-proxy
 containers:
  - cerc/go-ethereum
  - cerc/lighthouse
@@ -17,10 +16,8 @@ containers:
  - cerc/webapp-base
  - cerc/keycloak-reg-api
  - cerc/keycloak-reg-ui
-  - cerc/eth-api-proxy
 pods:
  - mainnet-eth
  - mainnet-eth-keycloak
  - mainnet-eth-metrics
-  - mainnet-eth-api-proxy
  - foundry
@@ -27,10 +27,7 @@ import sys
 import tomli
 import re

-default_spec_file_content = """config:
-    node_moniker: my-node-name
-    chain_id: my-chain-id
-"""
+default_spec_file_content = ""


 class SetupPhase(Enum):
@@ -1,8 +1,8 @@
 version: "1.0"
 name: mobymask-v2
 repos:
-  - github.com/cerc-io/go-ethereum
-  - github.com/cerc-io/lighthouse
+  - git.vdb.to/cerc-io/go-ethereum@v1.11.6-statediff-v5
+  - git.vdb.to/cerc-io/lighthouse
  - github.com/dboreham/foundry
  - github.com/ethereum-optimism/optimism@v1.0.4
  - github.com/ethereum-optimism/op-geth@v1.101105.2
@@ -0,0 +1,6 @@
+# MobyMask v3
+
+Instructions to setup and deploy MobyMask v3 stack (watcher + web-app) using [laconic-stack-orchestrator](/README.md#install)
+
+* Follow [watcher.md](./watcher.md) for deploying the watcher
+* Follow [web-app.md](./web-app.md) for deploying the app
@@ -0,0 +1,19 @@
+version: "1.0"
+description: "MobyMask v3 stack"
+name: mobymask-v3
+repos:
+  - github.com/cerc-io/ts-nitro@v0.1.13
+  - github.com/cerc-io/watcher-ts@v0.2.63
+  - github.com/cerc-io/mobymask-v2-watcher-ts@v0.2.2
+  - github.com/cerc-io/MobyMask@v0.1.3
+  - github.com/cerc-io/mobymask-ui@v0.2.1
+containers:
+  - cerc/nitro-contracts
+  - cerc/watcher-ts
+  - cerc/watcher-mobymask-v3
+  - cerc/mobymask
+  - cerc/mobymask-ui
+pods:
+  - nitro-contracts
+  - watcher-mobymask-v3
+  - mobymask-app-v3
@@ -0,0 +1,136 @@
+# MobyMask v3 Watcher
+
+## Setup
+
+Prerequisite: L2 Optimism Geth RPC endpoint
+
+Clone required repositories:
+
+```bash
+laconic-so --stack mobymask-v3 setup-repositories --pull --exclude github.com/cerc-io/mobymask-ui
+```
+
+Build the container images:
+
+```bash
+laconic-so --stack mobymask-v3 build-containers --exclude cerc/mobymask-ui
+```
+
+## Deploy
+
+### Configuration
+
+Create and update an env file to be used in the next step ([defaults](../../config/watcher-mobymask-v3/mobymask-params.env)):
+
+  ```bash
+  # External ETH RPC endpoint for contract(s) deployment
+  CERC_ETH_RPC_ENDPOINT=
+
+  # External ETH RPC endpoint used for queries in the watcher
+  CERC_ETH_RPC_QUERY_ENDPOINT=
+
+  # External ETH RPC endpoint used for mutations in the watcher
+  CERC_ETH_RPC_MUTATION_ENDPOINT=
+
+  # External ETH endpoint used by watcher's Nitro node
+  CERC_NITRO_CHAIN_URL=
+
+  # Specify the an account PK for contract deployment
+  CERC_PRIVATE_KEY_DEPLOYER=
+
+  # Base URI for mobymask-app
+  # (used for generating a root invite link after deploying the contract)
+  CERC_MOBYMASK_APP_BASE_URI="http://127.0.0.1:3004/#"
+
+  # (Optional) Domain to be used in the relay node's announce address
+  CERC_RELAY_ANNOUNCE_DOMAIN=
+
+  # (Optional) Set of relay peers to connect to from the relay node
+  CERC_RELAY_PEERS=[]
+
+  # (Optional) Set of multiaddrs to be avoided while dialling
+  CERC_DENY_MULTIADDRS=[]
+
+  # (Optional) Type of pubsub to be used
+  CERC_PUBSUB=""
+
+  # Set to false for disabling watcher peer to send txs to L2
+  CERC_ENABLE_PEER_L2_TXS=true
+
+  # (Optional) Set already deployed MobyMask contract address to avoid deploying contract in the stack
+  CERC_DEPLOYED_CONTRACT=
+
+  # (Optional) Set already deployed Nitro addresses to avoid deploying them in the stack
+  CERC_NA_ADDRESS=
+  CERC_VPA_ADDRESS=
+  CERC_CA_ADDRESS=
+
+  # Specify private key of a funded account for sending txs to L2
+  CERC_PRIVATE_KEY_PEER=
+
+  # Specify private key for the Nitro account
+  CERC_WATCHER_NITRO_PK=
+
+  # (Optional) Set a pre-existing peer id to be used (enables consensus)
+  # Uses a generated peer id if not set (disables consensus)
+  CERC_PEER_ID=
+
+  # Disable payments to upstream ETH server
+  CERC_ENABLE_UPSTREAM_PAYMENTS=false
+  ```
+
+* NOTE: If Optimism is running on the host machine, use `host.docker.internal` as the hostname to access the host port
+
+### Deploy the stack
+
+```bash
+laconic-so --stack mobymask-v3 deploy --cluster mobymask_v3 --exclude mobymask-app-v3 --env-file <PATH_TO_ENV_FILE> up
+```
+
+* To list down and monitor the running containers:
+
+  ```bash
+  laconic-so --stack mobymask-v3 deploy --cluster mobymask_v3 --exclude mobymask-app-v3 ps
+
+  # With status
+  docker ps -a
+
+  # Check logs for a container
+  docker logs -f <CONTAINER_ID>
+  ```
+
+* The watcher endpoint is exposed on host port `3001` and the relay node endpoint is exposed on host port `9090`
+
+* Check the logs of the MobyMask contract deployment container to get the deployed contract's address and generated root invite link:
+
+  ```bash
+  docker logs -f $(docker ps -aq --filter name="mobymask-1")
+  ```
+
+* Check logs of the Nitro contracts container to get the deployed Nitro contracts' addresses:
+
+  ```bash
+  docker exec -it $(docker ps -q --filter name="nitro-contracts") bash -c "cat /app/deployment/nitro-addresses.json"
+  ```
+
+## Clean up
+
+Stop all services running in the background:
+
+```bash
+laconic-so --stack mobymask-v3 deploy --cluster mobymask_v3 --exclude mobymask-app-v3 down
+```
+
+Clear volumes created by this stack:
+
+```bash
+# List all relevant volumes
+docker volume ls -q --filter "name=mobymask_v3"
+
+# Remove all the listed volumes
+docker volume rm $(docker volume ls -q --filter "name=mobymask_v3")
+
+# WARNING: To avoid changing peer ids for the watcher, `peers_ids` volume can be persisted
+# To delete all volumes except for `peers_ids`
+docker volume rm $(docker volume ls -q --filter "name=mobymask_v3" | grep -v "peers_ids$")
+```
@@ -0,0 +1,89 @@
+# MobyMask v3 App
+
+## Setup
+
+Prerequisite: Watcher with GQL and relay node endpoints
+
+Clone required repositories:
+
+```bash
+laconic-so --stack mobymask-v3 setup-repositories --pull --include github.com/cerc-io/mobymask-ui
+```
+
+Build the container images:
+
+```bash
+laconic-so --stack mobymask-v3 build-containers --include cerc/mobymask-ui
+```
+
+## Deploy
+
+### Configuration
+
+Create and update an env file to be used in the next step ([defaults](../../config/watcher-mobymask-v3/mobymask-params.env)):
+
+  ```bash
+  # Set of relay nodes to be used by the web-app
+  # (use double quotes " for strings, avoid space after commas)
+  # Eg. CERC_RELAY_NODES=["/dns4/example.com/tcp/443/wss/p2p/12D3KooWGHmDDCc93XUWL16FMcTPCGu2zFaMkf67k8HZ4gdQbRDr"]
+  CERC_RELAY_NODES=[]
+
+  # Set of multiaddrs to be avoided while dialling
+  CERC_DENY_MULTIADDRS=[]
+
+  # Also add if running MobyMask app:
+
+  # Watcher endpoint used by the app for GQL queries
+  CERC_APP_WATCHER_URL="http://127.0.0.1:3001"
+
+  # Set deployed MobyMask contract address to be used in MobyMask app's config
+  CERC_DEPLOYED_CONTRACT=
+
+  # L2 Chain ID used by mobymask web-app for L2 txs
+  CERC_CHAIN_ID=42069
+
+  # (Optional) Type of pubsub to be used ("floodsub" | "gossipsub")
+  CERC_PUBSUB=""
+
+  # (Optional) Set of direct peers to be used when pubsub is set to gossipsub
+  CERC_GOSSIPSUB_DIRECT_PEERS=[]
+
+  # Set Nitro addresses
+  CERC_NA_ADDRESS=
+  CERC_VPA_ADDRESS=
+  CERC_CA_ADDRESS=
+
+  # Nitro account address to make the query and mutation payments to
+  CERC_PAYMENT_NITRO_ADDRESS=
+
+  # (Optional) Endpoint for Mobymask snap installation
+  CERC_SNAP_URL=
+  ```
+
+### Deploy the stack
+
+```bash
+laconic-so --stack mobymask-v3 deploy --cluster mobymask_v3 --include mobymask-app-v3 --env-file <PATH_TO_ENV_FILE> up
+
+# Runs the MobyMask v3 app on host port 3004
+```
+
+To list down and monitor the running containers:
+
+```bash
+laconic-so --stack mobymask-v3 deploy --cluster mobymask_v3 --include mobymask-app-v3 ps
+
+# With status
+docker ps -a
+
+# Check logs for a container
+docker logs -f <CONTAINER_ID>
+```
+
+## Clean up
+
+Stop all services running in the background:
+
+```bash
+laconic-so --stack mobymask-v3 deploy --cluster mobymask_v3 --include mobymask-app-v3 down
+```
@@ -2,7 +2,7 @@ version: "1.1"
 name: package-registry
 description: "Local Package Registry"
 repos:
-  - github.com/cerc-io/hosting
+  - git.vdb.to/cerc-io/hosting
  - gitea.com/gitea/act_runner
 containers:
  - cerc/act-runner
@@ -20,7 +20,7 @@ from app.deploy_util import VolumeMapping, run_container_command
 from pathlib import Path

 default_spec_file_content = """config:
-    config_variable: test-value
+    test-variable-1: test-value-1
 """


@@ -20,13 +20,12 @@ import copy
 import os
 import sys
 from dataclasses import dataclass
-from decouple import config
 from importlib import resources
 import subprocess
 from python_on_whales import DockerClient, DockerException
 import click
 from pathlib import Path
-from app.util import include_exclude_check, get_parsed_stack_config, global_options2
+from app.util import include_exclude_check, get_parsed_stack_config, global_options2, get_dev_root_path
 from app.deploy_types import ClusterContext, DeployCommandContext
 from app.deployment_create import create as deployment_create
 from app.deployment_create import init as deployment_init
@@ -42,9 +41,16 @@ from app.deployment_create import setup as deployment_setup
 def command(ctx, include, exclude, env_file, cluster):
    '''deploy a stack'''

+    # Although in theory for some subcommands (e.g. deploy create) the stack can be inferred,
+    # Click doesn't allow us to know that here, so we make providing the stack mandatory
+    stack = global_options2(ctx).stack
+    if not stack:
+        print("Error: --stack option is required")
+        sys.exit(1)
+
    if ctx.parent.obj.debug:
        print(f"ctx.parent.obj: {ctx.parent.obj}")
-    ctx.obj = create_deploy_context(global_options2(ctx), global_options2(ctx).stack, include, exclude, cluster, env_file)
+    ctx.obj = create_deploy_context(global_options2(ctx), stack, include, exclude, cluster, env_file)
    # Subcommand is executed now, by the magic of click


@@ -235,17 +241,15 @@ def _make_runtime_env(ctx):
 # stack has to be either PathLike pointing to a stack yml file, or a string with the name of a known stack
 def _make_cluster_context(ctx, stack, include, exclude, cluster, env_file):

-    if ctx.local_stack:
-        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
-        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
-    else:
-        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+    dev_root_path = get_dev_root_path(ctx)

    # TODO: huge hack, fix this
    # If the caller passed a path for the stack file, then we know that we can get the compose files
    # from the same directory
+    deployment = False
    if isinstance(stack, os.PathLike):
        compose_dir = stack.parent.joinpath("compose")
+        deployment = True
    else:
        # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
        compose_dir = Path(__file__).absolute().parent.joinpath("data", "compose")
@@ -296,14 +300,24 @@ def _make_cluster_context(ctx, stack, include, exclude, cluster, env_file):
            if pod_repository is None or pod_repository == "internal":
                compose_file_name = os.path.join(compose_dir, f"docker-compose-{pod_path}.yml")
            else:
-                pod_root_dir = os.path.join(dev_root_path, pod_repository.split("/")[-1], pod["path"])
-                compose_file_name = os.path.join(pod_root_dir, "docker-compose.yml")
-                pod_pre_start_command = pod["pre_start_command"]
-                pod_post_start_command = pod["post_start_command"]
-                if pod_pre_start_command is not None:
-                    pre_start_commands.append(os.path.join(pod_root_dir, pod_pre_start_command))
-                if pod_post_start_command is not None:
-                    post_start_commands.append(os.path.join(pod_root_dir, pod_post_start_command))
+                if deployment:
+                    compose_file_name = os.path.join(compose_dir, "docker-compose.yml")
+                    pod_pre_start_command = pod["pre_start_command"]
+                    pod_post_start_command = pod["post_start_command"]
+                    script_dir = compose_dir.parent.joinpath("pods", pod_name, "scripts")
+                    if pod_pre_start_command is not None:
+                        pre_start_commands.append(os.path.join(script_dir, pod_pre_start_command))
+                    if pod_post_start_command is not None:
+                        post_start_commands.append(os.path.join(script_dir, pod_post_start_command))
+                else:
+                    pod_root_dir = os.path.join(dev_root_path, pod_repository.split("/")[-1], pod["path"])
+                    compose_file_name = os.path.join(pod_root_dir, "docker-compose.yml")
+                    pod_pre_start_command = pod["pre_start_command"]
+                    pod_post_start_command = pod["post_start_command"]
+                    if pod_pre_start_command is not None:
+                        pre_start_commands.append(os.path.join(pod_root_dir, pod_pre_start_command))
+                    if pod_post_start_command is not None:
+                        post_start_commands.append(os.path.join(pod_root_dir, pod_post_start_command))
            compose_files.append(compose_file_name)
        else:
            if ctx.verbose:
@@ -16,14 +16,14 @@
 import os
 from typing import List
 from app.deploy_types import DeployCommandContext, VolumeMapping
-from app.util import get_parsed_stack_config, get_yaml, get_compose_file_dir
+from app.util import get_parsed_stack_config, get_yaml, get_compose_file_dir, get_pod_list


 def _container_image_from_service(stack: str, service: str):
    # Parse the compose files looking for the image name of the specified service
    image_name = None
    parsed_stack = get_parsed_stack_config(stack)
-    pods = parsed_stack["pods"]
+    pods = get_pod_list(parsed_stack)
    yaml = get_yaml()
    for pod in pods:
        pod_file_path = os.path.join(get_compose_file_dir(), f"docker-compose-{pod}.yml")
@@ -25,6 +25,16 @@ from app.deploy import exec_operation, logs_operation, create_deploy_context
 class DeploymentContext:
    dir: Path

+    def get_stack_file(self):
+        return self.dir.joinpath("stack.yml")
+
+    def get_env_file(self):
+        return self.dir.joinpath("config.env")
+
+    # TODO: implement me
+    def get_cluster_name(self):
+        return None
+

@click.group()
@click.option("--dir", required=True, help="path to deployment directory")
@@ -49,10 +59,10 @@ def command(ctx, dir):


 def make_deploy_context(ctx):
-    # Get the stack config file name
-    stack_file_path = ctx.obj.dir.joinpath("stack.yml")
-    # TODO: add cluster name and env file here
-    return create_deploy_context(ctx.parent.parent.obj, stack_file_path, None, None, None, None)
+    stack_file_path = ctx.obj.get_stack_file()
+    env_file = ctx.obj.get_env_file()
+    cluster_name = ctx.obj.get_cluster_name()
+    return create_deploy_context(ctx.parent.parent.obj, stack_file_path, None, None, cluster_name, env_file)


@command.command()
@@ -17,12 +17,13 @@ import click
 from importlib import util
 import os
 from pathlib import Path
+from typing import List
 import random
-from shutil import copyfile, copytree
+from shutil import copy, copyfile, copytree
 import sys
-from app.util import get_stack_file_path, get_parsed_deployment_spec, get_parsed_stack_config, global_options, get_yaml
-from app.util import get_compose_file_dir
-from app.deploy_types import DeploymentContext, LaconicStackSetupCommand
+from app.util import (get_stack_file_path, get_parsed_deployment_spec, get_parsed_stack_config, global_options, get_yaml,
+                      get_pod_list, get_pod_file_path, pod_has_scripts, get_pod_script_paths, get_plugin_code_path)
+from app.deploy_types import DeploymentContext, DeployCommandContext, LaconicStackSetupCommand


 def _make_default_deployment_dir():
@@ -32,10 +33,10 @@ def _make_default_deployment_dir():
 def _get_ports(stack):
    ports = {}
    parsed_stack = get_parsed_stack_config(stack)
-    pods = parsed_stack["pods"]
+    pods = get_pod_list(parsed_stack)
    yaml = get_yaml()
    for pod in pods:
-        pod_file_path = os.path.join(get_compose_file_dir(), f"docker-compose-{pod}.yml")
+        pod_file_path = get_pod_file_path(parsed_stack, pod)
        parsed_pod_file = yaml.load(open(pod_file_path, "r"))
        if "services" in parsed_pod_file:
            for svc_name, svc in parsed_pod_file["services"].items():
@@ -49,10 +50,10 @@ def _get_named_volumes(stack):
    # Parse the compose files looking for named volumes
    named_volumes = []
    parsed_stack = get_parsed_stack_config(stack)
-    pods = parsed_stack["pods"]
+    pods = get_pod_list(parsed_stack)
    yaml = get_yaml()
    for pod in pods:
-        pod_file_path = os.path.join(get_compose_file_dir(), f"docker-compose-{pod}.yml")
+        pod_file_path = get_pod_file_path(parsed_stack, pod)
        parsed_pod_file = yaml.load(open(pod_file_path, "r"))
        if "volumes" in parsed_pod_file:
            volumes = parsed_pod_file["volumes"]
@@ -105,16 +106,27 @@ def _fixup_pod_file(pod, spec, compose_dir):
                pod["services"][container_name]["ports"] = container_ports


+def _commands_plugin_path(ctx: DeployCommandContext):
+    plugin_path = get_plugin_code_path(ctx.stack)
+    return plugin_path.joinpath("deploy", "commands.py")
+
+
+# See: https://stackoverflow.com/a/54625079/1701505
+def _has_method(o, name):
+    return callable(getattr(o, name, None))
+
+
 def call_stack_deploy_init(deploy_command_context):
    # Link with the python file in the stack
    # Call a function in it
    # If no function found, return None
-    python_file_path = get_stack_file_path(deploy_command_context.stack).parent.joinpath("deploy", "commands.py")
+    python_file_path = _commands_plugin_path(deploy_command_context)
    if python_file_path.exists():
        spec = util.spec_from_file_location("commands", python_file_path)
        imported_stack = util.module_from_spec(spec)
        spec.loader.exec_module(imported_stack)
-        return imported_stack.init(deploy_command_context)
+        if _has_method(imported_stack, "init"):
+            return imported_stack.init(deploy_command_context)
    else:
        return None

@@ -124,12 +136,14 @@ def call_stack_deploy_setup(deploy_command_context, parameters: LaconicStackSetu
    # Link with the python file in the stack
    # Call a function in it
    # If no function found, return None
-    python_file_path = get_stack_file_path(deploy_command_context.stack).parent.joinpath("deploy", "commands.py")
+    python_file_path = _commands_plugin_path(deploy_command_context)
+    print(f"Path: {python_file_path}")
    if python_file_path.exists():
        spec = util.spec_from_file_location("commands", python_file_path)
        imported_stack = util.module_from_spec(spec)
        spec.loader.exec_module(imported_stack)
-        return imported_stack.setup(deploy_command_context, parameters, extra_args)
+        if _has_method(imported_stack, "setup"):
+            return imported_stack.setup(deploy_command_context, parameters, extra_args)
    else:
        return None

@@ -139,12 +153,13 @@ def call_stack_deploy_create(deployment_context, extra_args):
    # Link with the python file in the stack
    # Call a function in it
    # If no function found, return None
-    python_file_path = get_stack_file_path(deployment_context.command_context.stack).parent.joinpath("deploy", "commands.py")
+    python_file_path = _commands_plugin_path(deployment_context.command_context)
    if python_file_path.exists():
        spec = util.spec_from_file_location("commands", python_file_path)
        imported_stack = util.module_from_spec(spec)
        spec.loader.exec_module(imported_stack)
-        return imported_stack.create(deployment_context, extra_args)
+        if _has_method(imported_stack, "create"):
+            return imported_stack.create(deployment_context, extra_args)
    else:
        return None

@@ -178,16 +193,18 @@ def _get_mapped_ports(stack: str, map_recipe: str):
                    ports_array = ports[service]
                    for x in range(0, len(ports_array)):
                        orig_port = ports_array[x]
+                        # Strip /udp suffix if present
+                        bare_orig_port = orig_port.replace("/udp", "")
                        random_port = random.randint(20000, 50000)  # Beware: we're relying on luck to not collide
                        if map_recipe == "any-variable-random":
                            # This is the default so take no action
                            pass
                        elif map_recipe == "localhost-same":
                            # Replace instances of "- XX" with "- 127.0.0.1:XX"
-                            ports_array[x] = f"127.0.0.1:{orig_port}:{orig_port}"
+                            ports_array[x] = f"127.0.0.1:{bare_orig_port}:{orig_port}"
                        elif map_recipe == "any-same":
                            # Replace instances of "- XX" with "- 0.0.0.0:XX"
-                            ports_array[x] = f"0.0.0.0:{orig_port}:{orig_port}"
+                            ports_array[x] = f"0.0.0.0:{bare_orig_port}:{orig_port}"
                        elif map_recipe == "localhost-fixed-random":
                            # Replace instances of "- XX" with "- 127.0.0.1:<rnd>:XX"
                            ports_array[x] = f"127.0.0.1:{random_port}:{orig_port}"
@@ -202,22 +219,48 @@ def _get_mapped_ports(stack: str, map_recipe: str):
    return ports


+def _parse_config_variables(variable_values: str):
+    result = None
+    if variable_values:
+        value_pairs = variable_values.split(",")
+        if len(value_pairs):
+            result_values = {}
+            for value_pair in value_pairs:
+                variable_value_pair = value_pair.split("=")
+                if len(variable_value_pair) != 2:
+                    print(f"ERROR: config argument is not valid: {variable_values}")
+                    sys.exit(1)
+                variable_name = variable_value_pair[0]
+                variable_value = variable_value_pair[1]
+                result_values[variable_name] = variable_value
+            result = {"config": result_values}
+    return result
+
+
@click.command()
+@click.option("--config", help="Provide config variables for the deployment")
@click.option("--output", required=True, help="Write yaml spec file here")
@click.option("--map-ports-to-host", required=False,
              help="Map ports to the host as one of: any-variable-random (default), "
              "localhost-same, any-same, localhost-fixed-random, any-fixed-random")
@click.pass_context
-def init(ctx, output, map_ports_to_host):
+def init(ctx, config, output, map_ports_to_host):
    yaml = get_yaml()
    stack = global_options(ctx).stack
-    verbose = global_options(ctx).verbose
+    debug = global_options(ctx).debug
    default_spec_file_content = call_stack_deploy_init(ctx.obj)
    spec_file_content = {"stack": stack}
    if default_spec_file_content:
        spec_file_content.update(default_spec_file_content)
-    if verbose:
-        print(f"Creating spec file for stack: {stack}")
+    config_variables = _parse_config_variables(config)
+    if config_variables:
+        # Implement merge, since update() overwrites
+        orig_config = spec_file_content["config"]
+        new_config = config_variables["config"]
+        merged_config = {**new_config, **orig_config}
+        spec_file_content.update({"config": merged_config})
+    if debug:
+        print(f"Creating spec file for stack: {stack} with content: {spec_file_content}")

    ports = _get_mapped_ports(stack, map_ports_to_host)
    spec_file_content["ports"] = ports
@@ -233,6 +276,23 @@ def init(ctx, output, map_ports_to_host):
        yaml.dump(spec_file_content, output_file)


+def _write_config_file(spec_file: Path, config_env_file: Path):
+    spec_content = get_parsed_deployment_spec(spec_file)
+    # Note: we want to write an empty file even if we have no config variables
+    with open(config_env_file, "w") as output_file:
+        if "config" in spec_content and spec_content["config"]:
+            config_vars = spec_content["config"]
+            if config_vars:
+                for variable_name, variable_value in config_vars.items():
+                    output_file.write(f"{variable_name}={variable_value}\n")
+
+
+def _copy_files_to_directory(file_paths: List[Path], directory: Path):
+    for path in file_paths:
+        # Using copy to preserve the execute bit
+        copy(path, os.path.join(directory, os.path.basename(path)))
+
+
@click.command()
@click.option("--spec-file", required=True, help="Spec file to use to create this deployment")
@click.option("--deployment-dir", help="Create deployment files in this directory")
@@ -257,16 +317,22 @@ def create(ctx, spec_file, deployment_dir, network_dir, initial_peers):
    # Copy spec file and the stack file into the deployment dir
    copyfile(spec_file, os.path.join(deployment_dir, os.path.basename(spec_file)))
    copyfile(stack_file, os.path.join(deployment_dir, os.path.basename(stack_file)))
+    # Copy any config varibles from the spec file into an env file suitable for compose
+    _write_config_file(spec_file, os.path.join(deployment_dir, "config.env"))
    # Copy the pod files into the deployment dir, fixing up content
-    pods = parsed_stack['pods']
+    pods = get_pod_list(parsed_stack)
    destination_compose_dir = os.path.join(deployment_dir, "compose")
    os.mkdir(destination_compose_dir)
+    destination_pods_dir = os.path.join(deployment_dir, "pods")
+    os.mkdir(destination_pods_dir)
    data_dir = Path(__file__).absolute().parent.joinpath("data")
    yaml = get_yaml()
    for pod in pods:
-        pod_file_path = os.path.join(get_compose_file_dir(), f"docker-compose-{pod}.yml")
+        pod_file_path = get_pod_file_path(parsed_stack, pod)
        parsed_pod_file = yaml.load(open(pod_file_path, "r"))
        extra_config_dirs = _find_extra_config_dirs(parsed_pod_file, pod)
+        destination_pod_dir = os.path.join(destination_pods_dir, pod)
+        os.mkdir(destination_pod_dir)
        if global_options(ctx).debug:
            print(f"extra config dirs: {extra_config_dirs}")
        _fixup_pod_file(parsed_pod_file, parsed_spec, destination_compose_dir)
@@ -282,6 +348,12 @@ def create(ctx, spec_file, deployment_dir, network_dir, initial_peers):
                # If the same config dir appears in multiple pods, it may already have been copied
                if not os.path.exists(destination_config_dir):
                    copytree(source_config_dir, destination_config_dir)
+        # Copy the script files for the pod, if any
+        if pod_has_scripts(parsed_stack, pod):
+            destination_script_dir = os.path.join(destination_pod_dir, "scripts")
+            os.mkdir(destination_script_dir)
+            script_paths = get_pod_script_paths(parsed_stack, pod)
+            _copy_files_to_directory(script_paths, destination_script_dir)
    # Delegate to the stack's Python code
    # The deploy create command doesn't require a --stack argument so we need to insert the
    # stack member here.
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
dboreham	99f80ddc7c	Trigger fixturenet-eth-plugeth-test CI job	2023-10-13 07:38:27 -06:00
prathamesh0 nabarun Shreerang Kale	246d3d8732	Run go-nitro node in process in ipld-eth-server (#575 ) * Setup ipld-eth-server to run in-process Nitro node * Update watcher version in fixturenet-payments stack * Update upstream nitro multiaddr in watcher setup * Change RPC query endpoint to ipld-eth-server * Update Ponder config to pay ipld-eth-server Nitro node * Separate nitro-rpc-client service and update demo.md * Remove unnecessary volumes * Update ipld-eth-server branch * Fix clean up steps --------- Co-authored-by: Nabarun <nabarun@deepstacksoft.com> Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-13 15:27:17 +05:30
dboreham	a68abe5f5d	Update fixturenet-eth-test Trigger CI job run	2023-10-12 22:42:05 -06:00
dboreham	c3d87692fa	python setup CI action for arm linux (#578 ) * Workaround for missing Python binaries for ARM * Trigger CI job * Add Python install workaround to remaining jobs * Typo	2023-10-12 21:53:47 -06:00
dboreham	61579f0434	Implement scheme for triggering individual CI jobs (#577 ) * Implement scheme for triggering individual CI jobs * Add missing comment	2023-10-12 20:40:39 -06:00
nabarunandShreerang Kale	0bec51e96a	Pay for queries from watcher to indexer mode Ponder apps in payments stack (#573 ) * Use ponder in watcher mode and indexer mode separately in payments stack * Refactor config file and configure env variables for watcher mode * Update demo.md for payments stack * Handle review changes * Setup config to pay for watcher to indexer GQL queries * Fix config in stack for making payments in watcher ponder app * Update demo for payment from watcher to indexer mode Ponder apps * Use laconic-esm brannch for ponder --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-10-12 14:16:44 +05:30
roysc	f4216419c4	Don't error when CERC_GO_AUTH_TOKEN isn't set (#574 ) * Don't error when CERC_GO_AUTH_TOKEN isn't set * conditionally add ags	2023-10-11 21:24:52 -05:00
dboreham	420b1c292b	Force the stack to be specified (#571 ) * Force the stack to be specified * Fix up test * Remove test for legacy non-stack deploy	2023-10-10 16:13:29 -06:00
dboreham	1446e54f31	Tolerate missing plugin functions (#570 )	2023-10-10 15:32:07 -06:00
dboreham	2486003361	Gitea deployment (#568 ) * First part of deployments for external repos * Generate deployment dir * Create empty config file * Copy script files into deployment * Run scripts in deployment * Refactor * Integrate external plugins * Remove debug output	2023-10-09 14:54:55 -06:00
dboreham	5ec98ee9a1	Add missing container image (#567 )	2023-10-09 12:21:54 -06:00
prathamesh0	8c4ed24dfc	Update mobymask-v3 stack (#563 )	2023-10-09 10:32:57 +05:30
prathamesh0	9e56f6357d	Update demo instructions in fixturenet-payments stack (#560 ) * Update demo instructions * Add expected payment proxy output logs * Wait for chain endpoint to be up before starting go-nitro node	2023-10-06 14:36:10 +05:30
prathamesh0	8770b1df86	Upgrade mobymask-ui version in fixturenet-payments stack (#559 )	2023-10-05 17:58:34 +05:30
nabarun	889df76f4f	Use release tag for go-nitro container in payments stack (#558 )	2023-10-05 16:43:48 +05:30
nabarun Shreerang Kale prathamesh	5d19c56b0c	Upgrade Nitro version in stack and add `nitro-rpc-client` CLI (#557 ) * Changes required for ponder container and upgrade ts-nitro version * Fix empty CERC_RELAY_MULTIADDR env variable * Add curl output for ponder payment channel * Add `nitro-rpc-client` container in payments stack (#1) * Add container for nitro-rpc-client * Add nitro-rpc-client service * Update nitro-rpc-client container * Update demo.md in payments stack --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com> * Update env variables used for go-nitro container * Pass Nitro chain URL in watcher config * Update ponder config chainUrl * Remove curl check in ponder start script * Upgrade node version to 18 in watcher-ts Dockerfile * Update ponder section in the demo instructions --------- Co-authored-by: Shreerang Kale <shreerangkale@gmail.com> Co-authored-by: Prathamesh Musale <prathamesh.musale0@gmail.com>	2023-10-05 14:57:47 +05:30
prathamesh0	d57efe87b8	Add demo instructions to fixturenet-payments stack (#556 ) * Update remaining references for core repos from github to gitea * Add demo instructions * Add demo clean up steps	2023-10-04 12:51:04 +05:30
telackey	80b0c07736	Open ports for 2nd geth instance and add missing lcli param. (#555 )	2023-10-03 19:52:23 -05:00
telackey	6fa3ca2b6d	Update from github.com to git.vdb.to where applicable. (#553 ) * Update from github.com to git.vdb.to for many repos. * Use ipld-eth-server@v1.11.6-statediff-v5 for most stacks * Specify go-ethereum branch/tag	2023-10-03 13:55:33 -05:00
dboreham	3c5489681f	Implement deployment config (#554 ) * Initial deployment config implementation * Complete implementation, add test * Fix funky indentation * Revert test test	2023-10-03 12:49:15 -06:00
prathamesh0andnabarun	cf039d9562	Add a fixturenet-payments stack (#540 ) * Add a fixturenet-payments stack * Export the WebSocket port in fixturenet-eth-geth service * Add container to run a go-nitro node * Add container to deploy Nitro contracts * Read contract addresses from a volume when running the Nitro node * Add a service for Nitro reverse payment proxy * Expose payment proxy endpoint to be accessible from host * Map nitro node messaging and payment proxy ports to host * Use container to deploy Nitro contracts in mobymask-v3 stack * Use a common contract deployment script from mobymask-v3 stack * Add MobyMask contract deployment and watcher services * Fixes for contract deployment and watcher scripts * Add a container and service for mobymask-snap * Add MobyMask app service * Add container and service for a ponder app * Fix ponder setup and update instructions * Handle review comments * Use enablepaidrpcmethods flag in reverse payment proxy server * Update go-nitro branch * Fixes for mobymask-v3 stack --------- Co-authored-by: Nabarun <nabarun@deepstacksoft.com>	2023-10-03 17:40:34 +05:30
Zach	b485a3b8d8	doc on how to add a stack (#552 ) * doc on how to add a stack * commands to run + nits	2023-10-01 14:33:01 -04:00
dboreham	72dbee88d4	Document adding config.yml (#551 )	2023-09-27 15:52:08 -06:00
Zachandzramsay	33e443f41f	Gitea x Laconicd + some doc updates (#549 ) * combine instructions from 2 stacks Former-commit-id: 77d194cfd9b0503c3e55e8c79429fa1f36a8d784 * tidy doc --------- Co-authored-by: zramsay <zach@bluecollacoding.ca>	2023-09-27 17:36:12 -04:00
Zach	bc78c5e0d6	Update README.md (#544 )	2023-09-27 17:07:30 -04:00
dboreham	7fd2439aa9	Fix output text (#548 )	2023-09-27 15:04:13 -06:00
dboreham	eca5aae991	Document self-update command (#547 )	2023-09-27 14:57:48 -06:00
dboreham	5beaf69a36	Implement --check-only (#546 )	2023-09-27 14:51:52 -06:00
dboreham	06c4a77afe	Simple self-update feature (#545 ) * Simple self-update feature * Update quick install script for self-update	2023-09-27 14:24:41 -06:00
nabarun	aafadbbed6	Add readme to deploy subgraphs (#543 )	2023-09-27 12:15:51 +05:30
nabarun	be519e9ca0	Split graph-node stack to run independently (#541 ) * Split graph-node stack to run independently * Fix sushiswap subgraph config in fixturenet stack	2023-09-26 17:31:00 +05:30
Zach	e56a910260	remove old npm scope (#538 )	2023-09-25 09:43:06 -04:00
prathamesh0andShreerang Kale	e3dc75118b	Add support for direct peers when pubsub is set to gossipsub (#539 ) Co-authored-by: Shreerang Kale <shreerangkale@gmail.com>	2023-09-25 14:55:53 +05:30
roysc	e0b5318ebe	Plugeth stack fixX (#537 )	2023-09-20 14:26:58 -05:00
Zach	2425aa8556	fix readme (#519 )	2023-09-20 10:31:14 -04:00
prathamesh0	3dc9cd584a	Add a mobymask-v3 stack (#531 ) * Add a mobymask-v3 stack * Fix Nitro deployment script and add watcher container * Setup Nitro config * Run build after setting Nitro addresses * Setup consensus config * Add a container for web-app * Use node 18 for the web-app * Persist Nitro node data to a volume * Add clean up steps * Update query rates	2023-09-20 09:48:15 +05:30
telackey	ed9c253f61	Simplified, improved default dashboard for mainnet-eth-metrics. (#536 ) * Simplified, improved default dashboard for mainnet-eth-metrics. * Add missing lighthouse prometheus config.	2023-09-19 20:29:08 -05:00
telackey	bdf4f069b4	Include all of app/data regardless of depth. (#535 )	2023-09-19 20:26:48 -05:00
dboreham	5f9c3c14b2	Add port mapping option	2023-09-19 14:06:29 -06:00
dboreham	0b512db693	Handle udp ports mapped (#534 ) * Handle udp ports mapped * Fix lint error	2023-09-19 13:27:34 -06:00
dboreham	e0ecbc3ab3	Remove private repo from stack (#532 )	2023-09-19 10:36:05 -06:00