Add new build-webapp command and related scripts and containers. (#626)

* Add new build-webapp command and related scripts and containers.

.gitea/workflows/fixturenet-eth-plugeth-test.yml

@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Plugeth-Test
 
 on:
   push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-plugeth-test'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,8 +19,16 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      - name: "Install Python"
-        uses: cerc-io/setup-python@v4
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
         with:
           python-version: '3.8'
       - name: "Print Python version"

.gitea/workflows/fixturenet-eth-test.yml

@@ -2,7 +2,10 @@ name: Fixturenet-Eth-Test
 
 on:
   push:
-    branches: 'ci-test'
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-eth-test'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -16,7 +19,15 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'

.gitea/workflows/fixturenet-laconicd-test.yml

@@ -0,0 +1,55 @@
+name: Fixturenet-Laconicd-Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.gitea/workflows/triggers/fixturenet-laconicd-test'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+
+jobs:
+  test:
+    name: "Run an Laconicd fixturenet test"
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Update'
+        run: apt-get update
+      - name: 'Setup jq'
+        run: apt-get install jq -y
+      - name: 'Check jq'
+        run: |
+          which jq
+          jq --version
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh

.gitea/workflows/publish.yml

@@ -5,6 +5,8 @@ on:
     branches:
       - main
       - publish-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
 
 jobs:
   publish:
@@ -18,7 +20,15 @@ jobs:
         run: |
           build_tag=$(./scripts/create_build_tag_file.sh)
           echo "build-tag=v${build_tag}" >> $GITHUB_OUTPUT
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'

.gitea/workflows/test-deploy.yml

@@ -7,6 +7,8 @@ on:
     branches:
       - main
       - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'

.gitea/workflows/test-webapp.yml

@@ -0,0 +1,49 @@
+name: Webapp Test
+
+on:
+  pull_request:
+    branches: '*'
+  push:
+    branches:
+      - main
+      - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
+
+# Needed until we can incorporate docker startup into the executor container
+env:
+  DOCKER_HOST: unix:///var/run/dind.sock
+
+jobs:
+  test:
+    name: "Run webapp test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: Start dockerd # Also needed until we can incorporate into the executor
+        run: |
+          dockerd -H $DOCKER_HOST --userland-proxy=false &
+          sleep 5
+      - name: "Run webapp tests"
+        run: ./tests/webapp-test/run-webapp-test.sh

.gitea/workflows/test.yml

@@ -7,6 +7,8 @@ on:
     branches:
       - main
       - ci-test
+    paths-ignore:
+      - '.gitea/workflows/triggers/*'
 
 # Needed until we can incorporate docker startup into the executor container
 env:
@@ -19,7 +21,15 @@ jobs:
     steps:
       - name: "Clone project repository"
         uses: actions/checkout@v3
-      - name: "Install Python"
+      # At present the stock setup-python action fails on Linux/aarch64
+      # Conditional steps below workaroud this by using deadsnakes for that case only
+      - name: "Install Python for ARM on Linux"
+        if: ${{ runner.arch == 'arm64' && runner.os == 'Linux' }}
+        uses: deadsnakes/action@v3.0.1
+        with:
+          python-version: '3.8'
+      - name: "Install Python cases other than ARM on Linux"
+        if: ${{ ! (runner.arch == 'arm64' && runner.os == 'Linux') }}
         uses: actions/setup-python@v4
         with:
           python-version: '3.8'
@@ -38,3 +48,4 @@ jobs:
       - name: "Run smoke tests"
         run: ./tests/smoke-test/run-smoke-test.sh
 
+

.gitea/workflows/triggers/fixturenet-eth-plugeth-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-plugeth-test CI job
+trigger

.gitea/workflows/triggers/fixturenet-eth-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+

.gitea/workflows/triggers/fixturenet-laconicd-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+

.github/workflows/fixturenet-eth.yml

@@ -0,0 +1,30 @@
+name: Fixturenet-Eth Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-eth-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-eth test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-eth tests"
+        run: ./tests/fixturenet-eth/run-test.sh

.github/workflows/fixturenet-laconicd.yml

@@ -0,0 +1,30 @@
+name: Fixturenet-Laconicd Test
+
+on:
+  push:
+    branches: '*'
+    paths:
+      - '!**'
+      - '.github/workflows/triggers/fixturenet-laconicd-test'
+
+jobs:
+  test:
+    name: "Run fixturenet-laconicd test suite"
+    runs-on: ubuntu-latest
+    steps:
+      - name: "Clone project repository"
+        uses: actions/checkout@v3
+      - name: "Install Python"
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - name: "Print Python version"
+        run: python3 --version
+      - name: "Install shiv"
+        run: pip install shiv
+      - name: "Generate build version file"
+        run: ./scripts/create_build_tag_file.sh
+      - name: "Build local shiv package"
+        run: ./scripts/build_shiv_package.sh
+      - name: "Run fixturenet-laconicd tests"
+        run: ./tests/fixturenet-laconicd/run-test.sh

.github/workflows/triggers/fixturenet-eth-test

@@ -0,0 +1,2 @@
+Change this file to trigger running the fixturenet-eth-test CI job
+

.github/workflows/triggers/fixturenet-laconicd-test

@@ -0,0 +1,3 @@
+Change this file to trigger running the fixturenet-laconicd-test CI job
+
+trigger

.gitignore

@@ -6,5 +6,5 @@ laconic_stack_orchestrator.egg-info
 __pycache__
 *~
 package
-app/data/build_tag.txt
-build
+stack_orchestrator/data/build_tag.txt
+/build

README.md

@@ -16,6 +16,7 @@ Ensure that the following are already installed:
 - [Python3](https://wiki.python.org/moin/BeginnersGuide/Download): `python3 --version` >= `3.8.10` (the Python3 shipped in Ubuntu 20+ is good to go)
 - [Docker](https://docs.docker.com/get-docker/): `docker --version` >= `20.10.21`
 - [jq](https://stedolan.github.io/jq/download/): `jq --version` >= `1.5`
+- [git](https://git-scm.com/book/en/v2/Getting-Started-Installing-Git): `git --version` >= `2.10.3`
 
 Note: if installing docker-compose via package manager on Linux (as opposed to Docker Desktop), you must [install the plugin](https://docs.docker.com/compose/install/linux/#install-the-plugin-manually), e.g. :
 
@@ -48,15 +49,27 @@ Verify operation (your version will probably be different, just check here that
 laconic-so version
 Version: 1.1.0-7a607c2-202304260513
 ```
+Save the distribution url to `~/.laconic-so/config.yml`:
+```bash
+mkdir ~/.laconic-so
+echo "distribution-url: https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so" >  ~/.laconic-so/config.yml
+```
+
+### Update
+If Stack Orchestrator was installed using the process described above, it is able to subsequently self-update to the current latest version by running:
+
+```bash
+laconic-so update
+```
 
 ## Usage
 
-The various [stacks](/app/data/stacks) each contain instructions for running different stacks based on your use case. For example:
+The various [stacks](/stack_orchestrator/data/stacks) each contain instructions for running different stacks based on your use case. For example:
 
-- [self-hosted Gitea](/app/data/stacks/build-support)
-- [an Optimism Fixturenet](/app/data/stacks/fixturenet-optimism)
-- [laconicd with console and CLI](app/data/stacks/fixturenet-laconic-loaded)
-- [kubo (IPFS)](app/data/stacks/kubo)
+- [self-hosted Gitea](/stack_orchestrator/data/stacks/build-support)
+- [an Optimism Fixturenet](/stack_orchestrator/data/stacks/fixturenet-optimism)
+- [laconicd with console and CLI](stack_orchestrator/data/stacks/fixturenet-laconic-loaded)
+- [kubo (IPFS)](stack_orchestrator/data/stacks/kubo)
 
 ## Contributing
 

app/data/container-build/cerc-laconic-registry-cli/create-demo-records.sh

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-# Create some demo/test records in the registry
-set -e
-if [ -n "$CERC_SCRIPT_DEBUG" ]; then
-  set -x
-fi
-registry_command="laconic cns"
-record_1_filename=demo-record-1.yml
-cat <<EOF > ${record_1_filename}
-record:
-  type: WebsiteRegistrationRecord
-  url: 'https://cerc.io'
-  repo_registration_record_cid: QmSnuWmxptJZdLJpKRarxBMS2Ju2oANVrgbr2xWbie9b2D
-  build_artifact_cid: QmP8jTG1m9GSDJLCbeWhVSVgEzCPPwXRdCRuJtQ5Tz9Kc9
-  tls_cert_cid: QmbWqxBEKC3P8tqsKc98xmWNzrzDtRLMiMPL8wBuTGsMnR
-  version: 1.0.23
-EOF
-# Check we have funds
-funds_response=$(${registry_command} account get --address $(cat my-address.txt))
-funds_balance=$(echo ${funds_response} | jq -r .[0].balance[0].quantity)
-echo "Balance is: ${funds_balance}"
-# Create a bond
-bond_create_result=$(${registry_command} bond create --type aphoton --quantity 1000000000)
-bond_id=$(echo ${bond_create_result} | jq -r .bondId)
-echo "Created bond with id: ${bond_id}"
-# Publish a demo record
-publish_response=$(${registry_command} record publish --filename ${record_1_filename} --bond-id ${bond_id})
-published_record_id=$(echo ${publish_response} | jq -r .id)
-echo "Published ${record_1_filename} with id: ${published_record_id}"

app/data/container-build/cerc-plugeth-statediff/build.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-# Build cerc/plugeth-statediff
-source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
-fi
-docker build -t cerc/plugeth-statediff:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth-statediff

app/data/container-build/cerc-plugeth/build.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-# Build cerc/plugeth
-source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
-# This container build currently requires access to private dependencies in gitea
-# so we check that the necessary access token has been supplied here, then pass it o the build
-if [[ -z "${CERC_GO_AUTH_TOKEN}" ]]; then
-    echo "ERROR: CERC_GO_AUTH_TOKEN is not set" >&2
-    exit 1
-fi
-docker build -t cerc/plugeth:local ${build_command_args} --build-arg GIT_VDBTO_TOKEN=${CERC_GO_AUTH_TOKEN} ${CERC_REPO_BASE_DIR}/plugeth

app/data/container-build/cerc-watcher-erc20/Dockerfile

@@ -1,13 +0,0 @@
-FROM node:16.17.1-alpine3.16
-
-RUN apk --update --no-cache add git python3 alpine-sdk
-
-WORKDIR /app
-
-COPY . .
-
-RUN echo "Building watcher-ts" && \
-    git checkout v0.2.19 && \
-    yarn && yarn build
-
-WORKDIR /app/packages/erc20-watcher

app/data/stacks/chain-chunker/stack.yml

@@ -1,13 +0,0 @@
-version: "1.0"
-name: chain-chunker
-description: "Stack to build containers for chain-chunker"
-repos:
-  - github.com/cerc-io/ipld-eth-state-snapshot@v5
-  - github.com/cerc-io/eth-statediff-service@v5
-  - github.com/cerc-io/ipld-eth-db@v5
-  - github.com/cerc-io/ipld-eth-server@v5
-containers:
-  - cerc/ipld-eth-state-snapshot
-  - cerc/eth-statediff-service
-  - cerc/ipld-eth-db
-  - cerc/ipld-eth-server

app/data/stacks/fixturenet-graph-node/README.md

@@ -1,3 +0,0 @@
-# Graph-Node Fixturenet
-
-Experimental

app/data/stacks/fixturenet-graph-node/stack.yml

@@ -1,12 +0,0 @@
-version: "1.0"
-name: fixturenet-graph-node
-description: "A graph-node fixturenet"
-repos:
-  - github.com/filecoin-project/lotus
-  - github.com/graphprotocol/graph-node
-containers:
-  - cerc/lotus
-  - cerc/graph-node
-pods:
-  - fixturenet-lotus
-  - graph-node

docs/README.md

@@ -0,0 +1,8 @@
+# Stack Orchestrator
+
+Here you will find information about the design of stack orchestrator, contributing to it, and deploying services/applications that combine two or more "stacks".
+
+Most "stacks" contain their own README which has plenty of information on deploying, but stacks can be combined in a variety of ways which are document here, for example:
+
+- [Gitea with Laconicd Fixturenet](./gitea-with-laconicd-fixturenet.md)
+- [Laconicd Registry with Console](./laconicd-with-console.md)

docs/adding-a-new-stack.md

@@ -0,0 +1,71 @@
+# Adding a new stack
+
+See [this PR](https://github.com/cerc-io/stack-orchestrator/pull/434) for an example of how to currently add a minimal stack to stack orchestrator. The [reth stack](https://github.com/cerc-io/stack-orchestrator/pull/435) is another good example.
+
+For external developers, we recommend forking this repo and adding your stack directly to your fork. This initially requires running in "developer mode" as described [here](/docs/CONTRIBUTING.md). Check out the [Namada stack](https://github.com/vknowable/stack-orchestrator/blob/main/app/data/stacks/public-namada/digitalocean_quickstart.md) from Knowable to see how that is done.
+
+Core to the feature completeness of stack orchestrator is to [decouple the tool functionality from payload](https://github.com/cerc-io/stack-orchestrator/issues/315) which will no longer require forking to add a stack.
+
+## Example
+
+- in `stack_orchestrator/data/stacks/my-new-stack/stack.yml` add:
+
+```yaml
+version: "0.1"
+name: my-new-stack
+repos:
+  - github.com/my-org/my-new-stack
+containers:
+  - cerc/my-new-stack
+pods:
+  - my-new-stack
+```
+
+- in `stack_orchestrator/data/container-build/cerc-my-new-stack/build.sh` add:
+
+```yaml
+#!/usr/bin/env bash
+# Build the my-new-stack image
+source ${CERC_CONTAINER_BASE_DIR}/build-base.sh
+docker build -t cerc/my-new-stack:local -f ${CERC_REPO_BASE_DIR}/my-new-stack/Dockerfile ${build_command_args} ${CERC_REPO_BASE_DIR}/my-new-stack
+```
+
+- in `stack_orchestrator/data/compose/docker-compose-my-new-stack.yml` add:
+
+```yaml
+version: "3.2"
+
+services:
+  my-new-stack:
+    image: cerc/my-new-stack:local
+    restart: always
+    ports:
+      - "0.0.0.0:3000:3000"
+```
+
+- in `stack_orchestrator/data/repository-list.txt` add:
+
+```bash
+github.com/my-org/my-new-stack
+```
+whereby that repository contains your source code and a `Dockerfile`, and matches the `repos:` field in the `stack.yml`.
+
+- in `stack_orchestrator/data/container-image-list.txt` add:
+
+```bash
+cerc/my-new-stack
+```
+
+- in `stack_orchestrator/data/pod-list.txt` add:
+
+```bash
+my-new-stack
+```
+
+Now, the following commands will fetch, build, and deploy you app:
+
+```bash
+laconic-so --stack my-new-stack setup-repositories
+laconic-so --stack my-new-stack build-containers
+laconic-so --stack my-new-stack deploy-system up
+```

docs/cli.md

@@ -6,7 +6,7 @@ Sub-commands and flags
 
 Clone a single repository:
 ```
-$ laconic-so setup-repositories --include cerc-io/go-ethereum
+$ laconic-so setup-repositories --include github.com/cerc-io/go-ethereum
 ```
 Clone the repositories for a stack:
 ```

docs/gitea-with-laconicd-fixturenet.md

@@ -0,0 +1,80 @@
+# Gitea x NPMs X Laconicd
+
+Deploy a local Gitea server, publish NPM packages to it, then use those packages to build a Laconicd fixturenet. Demonstrates several components of the Laconic stack
+
+### Build and Deploy Gitea
+
+```bash
+laconic-so --stack build-support build-containers
+laconic-so --stack package-registry setup-repositories
+laconic-so --stack package-registry build-containers 
+laconic-so --stack package-registry deploy up
+```
+
+These commands can take awhile. Eventually, some instructions and a token will output. Set `CERC_NPM_AUTH_TOKEN`:
+
+```bash
+export CERC_NPM_AUTH_TOKEN=<your-token>
+```
+
+### Configure the hostname gitea.local
+
+How to do this depends on your operating system  but usually involves editing a `hosts` file. For example, on Linux add this line to the file `/etc/hosts` (needs sudo):
+
+```bash
+127.0.0.1       gitea.local
+```
+
+Test with:
+
+```bash
+ping gitea.local
+```
+
+```bash
+PING gitea.local (127.0.0.1) 56(84) bytes of data.
+64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.147 ms
+64 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.033 ms
+```
+
+Although not necessary in order to build and publish packages, you can now access the Gitea web interface at: [http://gitea.local:3000](http://gitea.local:3000) using these credentials: `gitea_admin/admin1234` (Note: please properly secure Gitea if public internet access is allowed).
+
+### Build npm Packages
+
+Clone the required repositories:
+
+```bash
+laconic-so --stack fixturenet-laconicd setup-repositories
+```
+
+Build and publish the npm packages:
+
+```bash
+laconic-so --stack fixturenet-laconicd build-npms
+```
+
+Navigate to the Gitea console and switch to the `cerc-io` user then find the `Packages` tab to confirm that these two npm packages have been published:
+
+- `@cerc-io/laconic-registry-cli`
+- `@cerc-io/laconic-sdk`
+
+### Build and deploy fixturenet containers
+
+```bash
+laconic-so --stack fixturenet-laconicd build-containers
+laconic-so --stack fixturenet-laconicd deploy up
+```
+
+Check the logs:
+
+```bash
+laconic-so --stack fixturenet-laconicd deploy logs
+```
+
+### Test with the registry CLI
+
+```bash
+laconic-so --stack fixturenet-laconicd deploy exec cli "laconic cns status"
+```
+
+Try additional CLI commands, documented [here](https://github.com/cerc-io/laconic-registry-cli#operations).

docs/laconicd-with-console.md

@@ -2,10 +2,10 @@
 
 The following tutorial explains the steps to run a laconicd fixturenet with CLI and web console that displays records in the registry. It is designed as an introduction to Stack Orchestrator and to showcase one component of the Laconic Stack. Prior to Stack Orchestrator, the following 4 repositories had to be cloned and setup manually:
 
-- https://github.com/cerc-io/laconicd
-- https://github.com/cerc-io/laconic-sdk
-- https://github.com/cerc-io/laconic-registry-cli
-- https://github.com/cerc-io/laconic-console
+- https://git.vdb.to/cerc-io/laconicd
+- https://git.vdb.to/cerc-io/laconic-sdk
+- https://git.vdb.to/cerc-io/laconic-registry-cli
+- https://git.vdb.to/cerc-io/laconic-console
 
 Now, with Stack Orchestrator, it is a few quick commands. Additionally, the `docker` and `docker compose` integration on the back-end allows the stack to easily persist, facilitating workflows.
 
@@ -52,7 +52,7 @@ laconic-so version
 1. Get the repositories
 
 ```
-laconic-so --stack fixturenet-laconic-loaded setup-repositories --include github.com/cerc-io/laconicd,github.com/cerc-io/laconic-sdk,github.com/cerc-io/laconic-registry-cli,github.com/cerc-io/laconic-console
+laconic-so --stack fixturenet-laconic-loaded setup-repositories --include git.vdb.to/cerc-io/laconicd,git.vdb.to/cerc-io/laconic-sdk,git.vdb.to/cerc-io/laconic-registry-cli,git.vdb.to/cerc-io/laconic-console
 ```
 
 2. Set this environment variable to the Laconic self-hosted Gitea instance:
@@ -212,7 +212,7 @@ record:
 
 3. Try out additional CLI commands
 
-- these are documented [here](https://github.com/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
+- these are documented [here](https://git.vdb.to/cerc-io/laconic-registry-cli#readme) and updates are forthcoming
 - e.g,:
 
 ```

docs/spec.md

@@ -1,7 +1,6 @@
 # Specification
 
-(note this page is out of date)
-
+Note: this page is out of date (but still useful) - it will no longer be useful once stacks are [decoupled from the tool functionality](https://github.com/cerc-io/stack-orchestrator/issues/315).
 
 ## Implementation
 

requirements.txt

@@ -7,3 +7,5 @@ PyYAML>=6.0.1
 ruamel.yaml>=0.17.32
 pydantic==1.10.9
 tomli==2.0.1
+validators==0.22.0
+kubernetes>=28.1.0

scripts/create_build_tag_file.sh

@@ -1,6 +1,6 @@
-build_tag_file_name=./app/data/build_tag.txt
+build_tag_file_name=./stack_orchestrator/data/build_tag.txt
 echo "# This file should be re-generated running: scripts/create_build_tag_file.sh script" > $build_tag_file_name
-product_version_string=$( tail -1 ./app/data/version.txt )
+product_version_string=$( tail -1 ./stack_orchestrator/data/version.txt )
 commit_string=$( git rev-parse --short HEAD )
 timestamp_string=$(date +'%Y%m%d%H%M')
 build_tag_string=${product_version_string}-${commit_string}-${timestamp_string}

scripts/quick-install-linux.sh

@@ -5,6 +5,9 @@ fi
 
 install_dir=~/bin
 
+# Skip the package install stuff if so directed
+if ! [[ -n "$CERC_SO_INSTALL_SKIP_PACKAGES" ]]; then
+
 # First display a reasonable warning to the user unless run with -y
 if ! [[ $# -eq 1 && $1 == "-y" ]]; then
   echo "**************************************************************************************"
@@ -128,13 +131,20 @@ sudo apt -y install docker-ce docker-ce-cli containerd.io docker-buildx-plugin d
 # Allow the current user to use Docker
 sudo usermod -aG docker $USER
 
+# End of long if block: Skip the package install stuff if so directed
+fi
+
 echo "**************************************************************************************"
 echo "Installing laconic-so"
 # install latest `laconic-so`
+distribution_url=https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
 install_filename=${install_dir}/laconic-so
 mkdir -p  ${install_dir}
-curl -L -o ${install_filename} https://github.com/cerc-io/stack-orchestrator/releases/latest/download/laconic-so
+curl -L -o ${install_filename} ${distribution_url}
 chmod +x ${install_filename}
+# Set up config file for self-update feature
+mkdir ~/.laconic-so
+echo "distribution-url: ${distribution_url}" >  ~/.laconic-so/config.yml
 
 echo "**************************************************************************************"
 # Check if our PATH line is already there

setup.py

@@ -14,18 +14,17 @@ setup(
     long_description=long_description,
     long_description_content_type="text/markdown",
     url='https://github.com/cerc-io/stack-orchestrator',
-    py_modules=['cli', 'app'],
+    py_modules=['stack_orchestrator'],
     packages=find_packages(),
     install_requires=[requirements],
     python_requires='>=3.7',
     include_package_data=True,
-    # See: https://github.com/pypa/setuptools/issues/1806
-    package_data={'': ['data/*', 'data/*/*', 'data/*/*/*', 'data/*/*/*/*', 'data/*/*/*/*/*']},
+    package_data={'': ['data/**']},
     classifiers=[
         "Programming Language :: Python :: 3.8",
         "Operating System :: OS Independent",
     ],
     entry_points={
-        'console_scripts': ['laconic-so=cli:cli'],
+        'console_scripts': ['laconic-so=stack_orchestrator.main:cli'],
     }
 )

stack_orchestrator/base.py

@@ -15,7 +15,7 @@
 
 import os
 from abc import ABC, abstractmethod
-from app.deploy import get_stack_status
+from stack_orchestrator.deploy.deploy import get_stack_status
 from decouple import config
 
 

stack_orchestrator/build/build_containers.py

@@ -27,12 +27,79 @@ import subprocess
 import click
 import importlib.resources
 from pathlib import Path
-from app.util import include_exclude_check, get_parsed_stack_config
-from app.base import get_npm_registry_url
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config
+from stack_orchestrator.base import get_npm_registry_url
 
 # TODO: find a place for this
 #    epilog="Config provided either in .env or settings.ini or env vars: CERC_REPO_BASE_DIR (defaults to ~/cerc)"
 
+def make_container_build_env(dev_root_path: str,
+                             container_build_dir: str,
+                             debug: bool,
+                             force_rebuild: bool,
+                             extra_build_args: str):
+    container_build_env = {
+        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
+        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
+        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
+        "CERC_REPO_BASE_DIR": dev_root_path,
+        "CERC_CONTAINER_BASE_DIR": container_build_dir,
+        "CERC_HOST_UID": f"{os.getuid()}",
+        "CERC_HOST_GID": f"{os.getgid()}",
+        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
+    }
+    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
+    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
+    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
+    docker_host_env = os.getenv("DOCKER_HOST")
+    if docker_host_env:
+        container_build_env.update({"DOCKER_HOST": docker_host_env})
+
+    return container_build_env
+
+
+def process_container(container,
+                      container_build_dir: str,
+                      container_build_env: dict,
+                      dev_root_path: str,
+                      quiet: bool,
+                      verbose: bool,
+                      dry_run: bool,
+                      continue_on_error: bool,
+                      ):
+    if not quiet:
+        print(f"Building: {container}")
+    build_dir = os.path.join(container_build_dir, container.replace("/", "-"))
+    build_script_filename = os.path.join(build_dir, "build.sh")
+    if verbose:
+        print(f"Build script filename: {build_script_filename}")
+    if os.path.exists(build_script_filename):
+        build_command = build_script_filename
+    else:
+        if verbose:
+            print(f"No script file found: {build_script_filename}, using default build script")
+        repo_dir = container.split('/')[1]
+        # TODO: make this less of a hack -- should be specified in some metadata somewhere
+        # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
+        repo_full_path = os.path.join(dev_root_path, repo_dir)
+        repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
+        build_command = os.path.join(container_build_dir,
+                                     "default-build.sh") + f" {container}:local {repo_dir_or_build_dir}"
+    if not dry_run:
+        if verbose:
+            print(f"Executing: {build_command} with environment: {container_build_env}")
+        build_result = subprocess.run(build_command, shell=True, env=container_build_env)
+        if verbose:
+            print(f"Return code is: {build_result.returncode}")
+        if build_result.returncode != 0:
+            print(f"Error running build for {container}")
+            if not continue_on_error:
+                print("FATAL Error: container build failed and --continue-on-error not set, exiting")
+                sys.exit(1)
+            else:
+                print("****** Container Build Error, continuing because --continue-on-error is set")
+    else:
+        print("Skipped")
 
 @click.command()
 @click.option('--include', help="only build these containers")
@@ -52,7 +119,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
     continue_on_error = ctx.obj.continue_on_error
 
     # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
-    container_build_dir = Path(__file__).absolute().parent.joinpath("data", "container-build")
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
 
     if local_stack:
         dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
@@ -67,7 +134,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
         print('Dev root directory doesn\'t exist, creating')
 
     # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
+    from stack_orchestrator import data
     with importlib.resources.open_text(data, "container-image-list.txt") as container_list_file:
         all_containers = container_list_file.read().splitlines()
 
@@ -83,61 +150,16 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
         if stack:
             print(f"Stack: {stack}")
 
-    # TODO: make this configurable
-    container_build_env = {
-        "CERC_NPM_REGISTRY_URL": get_npm_registry_url(),
-        "CERC_GO_AUTH_TOKEN": config("CERC_GO_AUTH_TOKEN", default=""),
-        "CERC_NPM_AUTH_TOKEN": config("CERC_NPM_AUTH_TOKEN", default=""),
-        "CERC_REPO_BASE_DIR": dev_root_path,
-        "CERC_CONTAINER_BASE_DIR": container_build_dir,
-        "CERC_HOST_UID": f"{os.getuid()}",
-        "CERC_HOST_GID": f"{os.getgid()}",
-        "DOCKER_BUILDKIT": config("DOCKER_BUILDKIT", default="0")
-    }
-    container_build_env.update({"CERC_SCRIPT_DEBUG": "true"} if debug else {})
-    container_build_env.update({"CERC_FORCE_REBUILD": "true"} if force_rebuild else {})
-    container_build_env.update({"CERC_CONTAINER_EXTRA_BUILD_ARGS": extra_build_args} if extra_build_args else {})
-    docker_host_env = os.getenv("DOCKER_HOST")
-    if docker_host_env:
-        container_build_env.update({"DOCKER_HOST": docker_host_env})
-
-    def process_container(container):
-        if not quiet:
-            print(f"Building: {container}")
-        build_dir = os.path.join(container_build_dir, container.replace("/", "-"))
-        build_script_filename = os.path.join(build_dir, "build.sh")
-        if verbose:
-            print(f"Build script filename: {build_script_filename}")
-        if os.path.exists(build_script_filename):
-            build_command = build_script_filename
-        else:
-            if verbose:
-                print(f"No script file found: {build_script_filename}, using default build script")
-            repo_dir = container.split('/')[1]
-            # TODO: make this less of a hack -- should be specified in some metadata somewhere
-            # Check if we have a repo for this container. If not, set the context dir to the container-build subdir
-            repo_full_path = os.path.join(dev_root_path, repo_dir)
-            repo_dir_or_build_dir = repo_full_path if os.path.exists(repo_full_path) else build_dir
-            build_command = os.path.join(container_build_dir, "default-build.sh") + f" {container}:local {repo_dir_or_build_dir}"
-        if not dry_run:
-            if verbose:
-                print(f"Executing: {build_command} with environment: {container_build_env}")
-            build_result = subprocess.run(build_command, shell=True, env=container_build_env)
-            if verbose:
-                print(f"Return code is: {build_result.returncode}")
-            if build_result.returncode != 0:
-                print(f"Error running build for {container}")
-                if not continue_on_error:
-                    print("FATAL Error: container build failed and --continue-on-error not set, exiting")
-                    sys.exit(1)
-                else:
-                    print("****** Container Build Error, continuing because --continue-on-error is set")
-        else:
-            print("Skipped")
+    container_build_env = make_container_build_env(dev_root_path,
+                                                   container_build_dir,
+                                                   debug,
+                                                   force_rebuild,
+                                                   extra_build_args)
 
     for container in containers_in_scope:
         if include_exclude_check(container, include, exclude):
-            process_container(container)
+            process_container(container, container_build_dir, container_build_env,
+                              dev_root_path, quiet, verbose, dry_run, continue_on_error)
         else:
             if verbose:
                 print(f"Excluding: {container}")

stack_orchestrator/build/build_npms.py

@@ -25,8 +25,8 @@ from decouple import config
 import click
 import importlib.resources
 from python_on_whales import docker, DockerException
-from app.base import get_stack
-from app.util import include_exclude_check, get_parsed_stack_config
+from stack_orchestrator.base import get_stack
+from stack_orchestrator.util import include_exclude_check, get_parsed_stack_config
 
 builder_js_image_name = "cerc/builder-js:local"
 
@@ -83,7 +83,7 @@ def command(ctx, include, exclude, force_rebuild, extra_build_args):
         os.makedirs(build_root_path)
 
     # See: https://stackoverflow.com/a/20885799/1701505
-    from app import data
+    from stack_orchestrator import data
     with importlib.resources.open_text(data, "npm-package-list.txt") as package_list_file:
         all_packages = package_list_file.read().splitlines()
 

stack_orchestrator/build/build_webapp.py

@@ -0,0 +1,76 @@
+# Copyright © 2022, 2023 Vulcanize
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <http:#www.gnu.org/licenses/>.
+
+# Builds webapp containers
+
+# env vars:
+# CERC_REPO_BASE_DIR defaults to ~/cerc
+
+# TODO: display the available list of containers; allow re-build of either all or specific containers
+
+import os
+from decouple import config
+import click
+from pathlib import Path
+from stack_orchestrator.build import build_containers
+
+
+@click.command()
+@click.option('--base-container', default="cerc/nextjs-base")
+@click.option('--source-repo', help="directory containing the webapp to build", required=True)
+@click.option("--force-rebuild", is_flag=True, default=False, help="Override dependency checking -- always rebuild")
+@click.option("--extra-build-args", help="Supply extra arguments to build")
+@click.pass_context
+def command(ctx, base_container, source_repo, force_rebuild, extra_build_args):
+    '''build the specified webapp container'''
+
+    quiet = ctx.obj.quiet
+    verbose = ctx.obj.verbose
+    dry_run = ctx.obj.dry_run
+    debug = ctx.obj.debug
+    local_stack = ctx.obj.local_stack
+    stack = ctx.obj.stack
+    continue_on_error = ctx.obj.continue_on_error
+
+    # See: https://stackoverflow.com/questions/25389095/python-get-path-of-root-project-structure
+    container_build_dir = Path(__file__).absolute().parent.parent.joinpath("data", "container-build")
+
+    if local_stack:
+        dev_root_path = os.getcwd()[0:os.getcwd().rindex("stack-orchestrator")]
+        print(f'Local stack dev_root_path (CERC_REPO_BASE_DIR) overridden to: {dev_root_path}')
+    else:
+        dev_root_path = os.path.expanduser(config("CERC_REPO_BASE_DIR", default="~/cerc"))
+
+    if not quiet:
+        print(f'Dev Root is: {dev_root_path}')
+
+    # First build the base container.
+    container_build_env = build_containers.make_container_build_env(dev_root_path, container_build_dir, debug,
+                                                                    force_rebuild, extra_build_args)
+
+    build_containers.process_container(base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)
+
+
+    # Now build the target webapp.  We use the same build script, but with a different Dockerfile and work dir.
+    container_build_env["CERC_CONTAINER_BUILD_WORK_DIR"] = os.path.abspath(source_repo)
+    container_build_env["CERC_CONTAINER_BUILD_DOCKERFILE"] = os.path.join(container_build_dir,
+                                                                    base_container.replace("/", "-"),
+                                                                    "Dockerfile.webapp")
+    webapp_name = os.path.abspath(source_repo).split(os.path.sep)[-1]
+    container_build_env["CERC_CONTAINER_BUILD_TAG"] = f"cerc/{webapp_name}:local"
+
+    build_containers.process_container(base_container, container_build_dir, container_build_env, dev_root_path, quiet,
+                                       verbose, dry_run, continue_on_error)

stack_orchestrator/data/compose/docker-compose-fixturenet-eth.yml

@@ -40,6 +40,7 @@ services:
       - fixturenet-eth-bootnode-geth
     ports:
       - "8545"
+      - "8546"
       - "40000"
       - "6060"
 
@@ -61,6 +62,9 @@ services:
       - fixturenet-eth-bootnode-geth
     volumes:
       - fixturenet_eth_geth_2_data:/root/ethdata
+    ports:
+      - "8545"
+      - "8546"
 
   fixturenet-eth-bootnode-lighthouse:
     restart: always

stack_orchestrator/data/compose/docker-compose-fixturenet-optimism.yml

@@ -70,6 +70,7 @@ services:
     command: "/run-op-geth.sh"
     ports:
       - "0.0.0.0:8545:8545"
+      - "0.0.0.0:8546:8546"
     healthcheck:
       test: ["CMD", "nc", "-vz", "localhost:8545"]
       interval: 30s

stack_orchestrator/data/compose/docker-compose-fixturenet-plugeth.yml

@@ -20,7 +20,7 @@ services:
       - SYS_PTRACE
     environment:
       CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
-      CERC_RUN_STATEDIFF: "detect"
+      CERC_RUN_STATEDIFF: ${CERC_RUN_STATEDIFF:-detect}
       CERC_STATEDIFF_DB_NODE_ID: 1
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
     env_file:
@@ -38,6 +38,7 @@ services:
       - fixturenet-eth-bootnode-geth
     ports:
       - "8545"
+      - "8546"
       - "40000"
       - "6060"
 
@@ -59,6 +60,9 @@ services:
       - fixturenet-eth-bootnode-geth
     volumes:
       - fixturenet_plugeth_geth_2_data:/root/ethdata
+    ports:
+      - "8545"
+      - "8546"
 
   fixturenet-eth-bootnode-lighthouse:
     restart: always

stack_orchestrator/data/compose/docker-compose-go-nitro.yml

@@ -0,0 +1,42 @@
+version: '3.7'
+
+services:
+  go-nitro:
+    image: cerc/go-nitro:local
+    hostname: go-nitro
+    restart: on-failure
+    depends_on:
+      # Wait for Nitro contracts to be deployed
+      nitro-contracts:
+        condition: service_completed_successfully
+    environment:
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      CERC_NITRO_PK: ${CERC_NITRO_PK:-f36f6dd450892224ee113899195ef922a4795d41c32cafb386d9aab6e0b7b0c6}
+      CERC_NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
+      CERC_NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/data/nitro-store}
+      CERC_NITRO_MSG_PORT: ${CERC_NITRO_MSG_PORT:-3006}
+      CERC_NITRO_WS_MSG_PORT: ${CERC_NITRO_WS_MSG_PORT:-5006}
+      CERC_NITRO_RPC_PORT: ${CERC_NITRO_RPC_PORT:-4006}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/run-nitro-node.sh"]
+    volumes:
+      - go_nitro_data:/app/data
+      - nitro_deployment:/app/deployment
+      - ../config/go-nitro/run-nitro-node.sh:/app/run-nitro-node.sh
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "4006"]
+      interval: 30s
+      timeout: 5s
+      retries: 10
+      start_period: 10s
+    ports:
+      - "3006:3006"
+      - "4006:4006"
+      - "5006:5006"
+
+volumes:
+  go_nitro_data:
+  nitro_deployment:

stack_orchestrator/data/compose/docker-compose-graph-node.yml

@@ -6,9 +6,6 @@ services:
         condition: service_healthy
       ipfs:
         condition: service_healthy
-      # Uncomment when running against fixturenet-lotus to wait for the Lotus node to come up
-      # lotus-node-1:
-      #   condition: service_healthy
     extra_hosts:
       - host.docker.internal:host-gateway
     environment:
@@ -18,9 +15,13 @@ services:
       postgres_user: graph-node
       postgres_pass: password
       postgres_db: graph-node
-      ethereum: ${NETWORK:-filecoin}:${ETH_RPC_ENDPOINT:-https://archive.lotus.vdb.to/rpc/v1}
+      ethereum: ${ETH_NETWORKS:-lotus-fixturenet:http://lotus-node-1:1234/rpc/v1}
       GRAPH_LOG: debug
       ETHEREUM_REORG_THRESHOLD: 3
+    entrypoint: ["bash", "-c"]
+    # Wait for ETH RPC endpoint to be up when running with fixturenet-lotus
+    command: |
+      "wait_for ${ETH_RPC_HOST:-lotus-node-1}:${ETH_RPC_PORT:-1234} -t 1800 -- start"
     ports:
       - "8000"
       - "8001"

stack_orchestrator/data/compose/docker-compose-ipld-eth-server-payments.yml

@@ -0,0 +1,111 @@
+version: "3.2"
+services:
+  ipld-eth-server-1:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-true}
+      NITRO_PK: ${CERC_NITRO_PK:-2d999770f7b5d49b694080f987b82bbc9fc9ac2b4dcc10b0f8aba7d700f69c6d}
+      NITRO_CHAIN_PK: ${CERC_NITRO_CHAIN_PK:-570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597}
+      NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL:-ws://fixturenet-eth-geth-1:8546}
+      NITRO_USE_DURABLE_STORE: ${CERC_NITRO_USE_DURABLE_STORE:-true}
+      NITRO_DURABLE_STORE_FOLDER: ${CERC_NITRO_DURABLE_STORE_FOLDER:-/app/nitro-data/nitro-store}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - eth_server_nitro_data:/app/nitro-data
+      - nitro_deployment:/app/deployment
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+      - "3005:3005"
+      - "4005:4005"
+      - "5005:5005"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+  ipld-eth-server-2:
+    restart: unless-stopped
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    environment:
+      SERVER_HTTP_PATH: 0.0.0.0:8081
+      SERVER_GRAPHQL: "true"
+      SERVER_GRAPHQLPATH: 0.0.0.0:8082
+      VDB_COMMAND: "serve"
+      ETH_CHAIN_CONFIG: "/tmp/chain.json"
+      DATABASE_NAME: cerc_testing
+      DATABASE_HOSTNAME: ipld-eth-db
+      DATABASE_PORT: 5432
+      DATABASE_USER: "vdbm"
+      DATABASE_PASSWORD: "password"
+      ETH_CHAIN_ID: 99
+      ETH_FORWARD_ETH_CALLS: "false"
+      ETH_FORWARD_GET_STORAGE_AT: "false"
+      ETH_PROXY_ON_ERROR: "false"
+      METRICS: "true"
+      PROM_HTTP: "true"
+      PROM_HTTP_ADDR: "0.0.0.0"
+      PROM_HTTP_PORT: "8090"
+      LOG_LEVEL: "debug"
+      CERC_REMOTE_DEBUG: ${CERC_REMOTE_DEBUG:-true}
+      NITRO_RUN_NODE_IN_PROCESS: ${CERC_NITRO_RUN_NODE_IN_PROCESS:-false}
+      NITRO_ENDPOINT: ${CERC_NITRO_ENDPOINT:-go-nitro:4006/api/v1}
+    entrypoint: ["bash", "-c", "/app/entrypoint.sh"]
+    volumes:
+      - type: bind
+        source: ../config/ipld-eth-server/chain.json
+        target: /tmp/chain.json
+      - ../config/ipld-eth-server/entrypoint.sh:/app/entrypoint.sh
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40000"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+
+volumes:
+  eth_server_nitro_data:
+  nitro_deployment:

stack_orchestrator/data/compose/docker-compose-laconic-dot-com.yml

@@ -0,0 +1,8 @@
+version: "3.2"
+
+services:
+  laconic-dot-com:
+    image: cerc/laconic-dot-com:local
+    restart: always
+    ports:
+      - "3000"

stack_orchestrator/data/compose/docker-compose-mainnet-eth-ipld-eth-db.yml

@@ -0,0 +1,29 @@
+version: "3.2"
+
+services:
+  migrations:
+    restart: on-failure
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-db:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+
+  ipld-eth-db:
+    image: timescale/timescaledb:2.8.1-pg14
+    restart: always
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+    volumes:
+      - mainnet_eth_ipld_eth_db:/var/lib/postgresql/data
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      - "5432"
+volumes:
+  mainnet_eth_ipld_eth_db:

stack_orchestrator/data/compose/docker-compose-mainnet-eth-ipld-eth-server.yml

@@ -0,0 +1,24 @@
+version: "3.7"
+services:
+  ipld-eth-server:
+    restart: always
+    depends_on:
+      ipld-eth-db:
+        condition: service_healthy
+    image: cerc/ipld-eth-server:local
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-ipld-eth-server/srv.env
+    volumes:
+      - ../config/mainnet-eth-ipld-eth-server/config.toml:/app/config.toml:ro
+    ports:
+      - "8081"
+      - "8082"
+      - "8090"
+      - "40001"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8081"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s

stack_orchestrator/data/compose/docker-compose-mainnet-eth-keycloak.yml

@@ -6,7 +6,7 @@ services:
     env_file:
       - ../config/mainnet-eth-keycloak/keycloak.env
     healthcheck:
-      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      test: ["CMD", "nc", "-v", "localhost", "35432"]
       interval: 30s
       timeout: 10s
       retries: 10
@@ -14,7 +14,7 @@ services:
     volumes:
       - mainnet_eth_keycloak_db:/var/lib/postgresql/data
     ports:
-      - 5432
+      - 35432
 
   keycloak:
     image: cerc/keycloak:local

stack_orchestrator/data/compose/docker-compose-mainnet-eth-plugeth.yml

@@ -0,0 +1,72 @@
+
+services:
+
+  mainnet-eth-geth-1:
+    restart: always
+    hostname: mainnet-eth-geth-1
+    cap_add:
+      - SYS_PTRACE
+    image: cerc/plugeth-with-plugins:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-geth.sh"
+    env_file:
+      - ../config/mainnet-eth-ipld-eth-db/db.env
+      - ../config/mainnet-eth-plugeth/geth.env
+    volumes:
+      - mainnet_eth_plugeth_geth_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-geth.sh:/opt/run-geth.sh
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "8545"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 3s
+    ports:
+      # http api
+      - "8545"
+      # ws api
+      - "8546"
+      # ws el
+      - "8551"
+      # p2p
+      - "30303"
+      - "30303/udp"
+      # debugging
+      - "40000"
+      # metrics
+      - "6060"
+
+  mainnet-eth-lighthouse-1:
+    restart: always
+    hostname: mainnet-eth-lighthouse-1
+    healthcheck:
+      test: ["CMD", "wget", "--tries=1", "--connect-timeout=1", "--quiet", "-O", "-", "http://localhost:5052/eth/v2/beacon/blocks/head"]
+      interval: 30s
+      timeout: 10s
+      retries: 10
+      start_period: 30s
+    environment:
+      LIGHTHOUSE_EXECUTION_ENDPOINT: "http://mainnet-eth-geth-1:8551"
+    env_file:
+      - ../config/mainnet-eth-plugeth/lighthouse.env
+    image: cerc/lighthouse:local
+    entrypoint: /bin/sh
+    command: -c "/opt/run-lighthouse.sh"
+    volumes:
+      - mainnet_eth_plugeth_lighthouse_1_data:/data
+      - mainnet_eth_plugeth_config_data:/etc/mainnet-eth
+      - ../config/mainnet-eth-plugeth/scripts/run-lighthouse.sh:/opt/run-lighthouse.sh
+    ports:
+      # api
+      - "5052"
+      # metrics
+      - "5054"
+      # p2p
+      - "9000"
+      - "9000/udp"
+
+volumes:
+  mainnet_eth_plugeth_config_data:
+  mainnet_eth_plugeth_geth_1_data:
+  mainnet_eth_plugeth_lighthouse_1_data:

stack_orchestrator/data/compose/docker-compose-mobymask-app-v3.yml

@@ -0,0 +1,45 @@
+version: '3.2'
+
+services:
+  # Builds and serves the MobyMask v3 react-app
+  mobymask-v3-app:
+    restart: unless-stopped
+    image: cerc/mobymask-ui:local
+    env_file:
+      - ../config/watcher-mobymask-v3/mobymask-params.env
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_CHAIN_ID: ${CERC_CHAIN_ID}
+      CERC_DEPLOYED_CONTRACT: ${CERC_DEPLOYED_CONTRACT}
+      CERC_RELAY_NODES: ${CERC_RELAY_NODES}
+      CERC_DENY_MULTIADDRS: ${CERC_DENY_MULTIADDRS}
+      CERC_PUBSUB: ${CERC_PUBSUB}
+      CERC_GOSSIPSUB_DIRECT_PEERS: ${CERC_GOSSIPSUB_DIRECT_PEERS}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+      CERC_APP_WATCHER_URL: ${CERC_APP_WATCHER_URL}
+      CERC_PAYMENT_NITRO_ADDRESS: ${CERC_PAYMENT_NITRO_ADDRESS:-0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94}
+      CERC_SNAP_URL: ${CERC_SNAP_URL}
+    working_dir: /app
+    command: ["bash", "/scripts/mobymask-app-start.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v3/mobymask-app-start.sh:/scripts/mobymask-app-start.sh
+      - peers_ids:/peers
+      - mobymask_deployment:/server
+      - nitro_deployment:/nitro
+    ports:
+      - "127.0.0.1:3004:80"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "80"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  mobymask_deployment:
+  nitro_deployment:

stack_orchestrator/data/compose/docker-compose-mobymask-snap.yml

@@ -0,0 +1,14 @@
+version: '3.7'
+
+services:
+  mobymask-snap:
+    restart: unless-stopped
+    image: cerc/mobymask-snap:local
+    ports:
+      - "127.0.0.1:8080:8080"
+    healthcheck:
+      test: ["CMD", "nc", "-vz", "localhost", "8080"]
+      interval: 10s
+      timeout: 5s
+      retries: 10
+      start_period: 10s

stack_orchestrator/data/compose/docker-compose-nitro-contracts.yml

@@ -0,0 +1,23 @@
+version: '3.7'
+
+services:
+  # Optionally deploys the Nitro contracts
+  nitro-contracts:
+    image: cerc/nitro-contracts:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT:-http://fixturenet-eth-geth-1:8545}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+    volumes:
+      - ../config/nitro-contracts/deploy.sh:/app/deploy.sh
+      - nitro_deployment:/app/deployment
+    command: ["bash", "-c", "/app/deploy.sh"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  nitro_deployment:

stack_orchestrator/data/compose/docker-compose-nitro-rpc-client.yml

@@ -0,0 +1,7 @@
+version: '3.7'
+services:
+    nitro-rpc-client:
+      image: cerc/nitro-rpc-client:local
+      hostname: nitro-rpc-client
+      restart: on-failure
+      command: ["bash", "-c", "tail -f /dev/null"]

stack_orchestrator/data/compose/docker-compose-ponder-indexer.yml

@@ -0,0 +1,80 @@
+version: '3.7'
+
+services:
+  ponder-er20-contracts:
+    image: cerc/watcher-erc20:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT:-http://fixturenet-eth-geth-1:8545}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+    volumes:
+      - ../config/ponder/deploy-erc20-contract.sh:/app/deploy-erc20-contract.sh
+      - erc20_deployment:/app/deployment
+    command: ["bash", "-c", "/app/deploy-erc20-contract.sh"]
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  ponder-app-indexer-1:
+    hostname: ponder-app-indexer-1
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_PONDER_RPC_URL_1: ${PONDER_RPC_URL_1:-http://ipld-eth-server-2:8081}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK_1:-58368d20ff12f17669c06158c21d885897aa56f9be430edc789614bf9851d53f}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK_1:-fb1e9af328c283ca3e2486e7c24d13582b7912057d8b9542ff41503c85bc05c0}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0x660a4bEF3fbC863Fcd8D3CDB39242aE513d7D92e}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/go-nitro/tcp/5006/ws/p2p/16Uiu2HAmNUiX7bpCpbo5JdqEebp85ptGU2Vk2AT9E3BykvbwQ3F9}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.indexer-1.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - erc20_deployment:/erc20
+      - ponder_indexer_1_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "127.0.0.1:42070:42070"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  ponder-app-indexer-2:
+    hostname: ponder-app-indexer-2
+    restart: unless-stopped
+    image: cerc/ponder:local
+    working_dir: /app/examples/token-erc20
+    environment:
+      CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+      CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer-1:42070/graphql}
+      CERC_PONDER_NITRO_PK: ${CERC_PONDER_INDEXER_NITRO_PK_2:-0aca28ba64679f63d71e671ab4dbb32aaa212d4789988e6ca47da47601c18fe2}
+      CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_INDEXER_NITRO_CHAIN_PK_2:-6177345b77c4069ac4d553f8b43cf68a799ca4bb63eac93d6cf796d63694ebf0}
+      CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+      CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+      CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0x67D5b55604d1aF90074FcB69b8C51838FFF84f8d}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./ponder-start.sh"]
+    volumes:
+      - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+      - ../config/ponder/ponder.indexer-2.config.ts:/app/examples/token-erc20/ponder.config.ts
+      - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+      - peers_ids:/peers
+      - nitro_deployment:/nitro
+      - erc20_deployment:/erc20
+      - ponder_indexer_2_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+    ports:
+      - "127.0.0.1:42071:42070"
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  nitro_deployment:
+  erc20_deployment:
+  ponder_indexer_1_nitro_data:
+  ponder_indexer_2_nitro_data:

stack_orchestrator/data/compose/docker-compose-ponder-watcher.yml

@@ -0,0 +1,39 @@
+
+version: '3.7'
+
+services:
+  ponder-app-watcher:
+      hostname: ponder-app-watcher
+      depends_on:
+        - ponder-app-indexer-1
+      restart: unless-stopped
+      image: cerc/ponder:local
+      working_dir: /app/examples/token-erc20
+      environment:
+        CERC_PONDER_CHAIN_ID: ${PONDER_CHAIN_ID:-99}
+        CERC_PONDER_NITRO_PK: ${CERC_PONDER_WATCHER_NITRO_PK:-febb3b74b0b52d0976f6571d555f4ac8b91c308dfa25c7b58d1e6a7c3f50c781}
+        CERC_PONDER_NITRO_CHAIN_PK: ${CERC_PONDER_WATCHER_NITRO_CHAIN_PK:-be4aa664815ea3bc3d63118649a733f6c96b243744310806ecb6d96359ab62cf}
+        CERC_PONDER_NITRO_CHAIN_URL: ${CERC_PONDER_NITRO_CHAIN_URL:-http://fixturenet-eth-geth-1:8546}
+        CERC_RELAY_MULTIADDR: ${CERC_RELAY_MULTIADDR}
+        CERC_INDEXER_GQL_ENDPOINT: ${CERC_INDEXER_GQL_ENDPOINT:-http://ponder-app-indexer-2:42070/graphql}
+        CERC_INDEXER_NITRO_ADDRESS: ${CERC_INDEXER_NITRO_ADDRESS:-0xB2B22ec3889d11f2ddb1A1Db11e80D20EF367c01}
+        CERC_INDEXER_NITRO_PAY_AMOUNT: ${CERC_INDEXER_NITRO_PAY_AMOUNT:-50}
+      command: ["bash", "./ponder-start.sh"]
+      volumes:
+        - ../config/ponder/ponder-start.sh:/app/examples/token-erc20/ponder-start.sh
+        - ../config/ponder/ponder.watcher.config.ts:/app/examples/token-erc20/ponder.config.ts
+        - ../config/ponder/base-rates-config.json:/app/examples/token-erc20/base-rates-config.json
+        - peers_ids:/peers
+        - nitro_deployment:/nitro
+        - erc20_deployment:/erc20
+        - ponder_watcher_nitro_data:/app/examples/token-erc20/.ponder/nitro-db
+      ports:
+        - "127.0.0.1:42069:42069"
+      extra_hosts:
+        - "host.docker.internal:host-gateway"
+
+volumes:
+  peers_ids:
+  nitro_deployment:
+  erc20_deployment:
+  ponder_watcher_nitro_data:

stack_orchestrator/data/compose/docker-compose-test.yml

@@ -4,6 +4,7 @@ services:
     restart: always
     environment:
       CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_TEST_PARAM_1: ${CERC_TEST_PARAM_1:-FAILED}
     volumes:
       - test-data:/data
     ports:

stack_orchestrator/data/compose/docker-compose-watcher-erc20.yml

@@ -34,7 +34,7 @@ services:
       - ETH_RPC_URL=http://go-ethereum:8545
     command: ["sh", "-c", "yarn server"]
     volumes:
-      - ../config/watcher-erc20/erc20-watcher.toml:/app/packages/erc20-watcher/environments/local.toml
+      - ../config/watcher-erc20/erc20-watcher.toml:/app/environments/local.toml
     ports:
       - "0.0.0.0:3002:3001"
       - "0.0.0.0:9002:9001"

stack_orchestrator/data/compose/docker-compose-watcher-mobymask-v3.yml

@@ -0,0 +1,123 @@
+version: '3.2'
+
+services:
+  # Starts the PostgreSQL database for watcher
+  mobymask-watcher-db:
+    restart: unless-stopped
+    image: postgres:14-alpine
+    environment:
+      - POSTGRES_USER=vdbm
+      - POSTGRES_MULTIPLE_DATABASES=mobymask-watcher,mobymask-watcher-job-queue
+      - POSTGRES_EXTENSION=mobymask-watcher-job-queue:pgcrypto
+      - POSTGRES_PASSWORD=password
+    volumes:
+      - ../config/postgresql/multiple-postgressql-databases.sh:/docker-entrypoint-initdb.d/multiple-postgressql-databases.sh
+      - mobymask_watcher_db_data:/var/lib/postgresql/data
+    ports:
+      - "127.0.0.1:15432:5432"
+    healthcheck:
+      test: ["CMD", "nc", "-v", "localhost", "5432"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 10s
+
+  # Deploys the MobyMask contract and generates an invite link
+  # Deployment is skipped if CERC_DEPLOYED_CONTRACT env is set
+  mobymask:
+    image: cerc/mobymask:local
+    working_dir: /app/packages/server
+    env_file:
+      - ../config/watcher-mobymask-v3/mobymask-params.env
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      ENV: "PROD"
+      CERC_ETH_RPC_ENDPOINT: ${CERC_ETH_RPC_ENDPOINT}
+      CERC_PRIVATE_KEY_DEPLOYER: ${CERC_PRIVATE_KEY_DEPLOYER:-0x888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218}
+      CERC_MOBYMASK_APP_BASE_URI: ${CERC_MOBYMASK_APP_BASE_URI}
+      CERC_DEPLOYED_CONTRACT: ${CERC_DEPLOYED_CONTRACT}
+    command: ["bash", "-c", "./deploy-and-generate-invite.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v3/deploy-and-generate-invite.sh:/app/packages/server/deploy-and-generate-invite.sh
+      - mobymask_deployment:/app/packages/server
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+  # Creates peer-id files if they don't exist
+  peer-ids-gen:
+    image: cerc/watcher-ts:local
+    restart: on-failure
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+    working_dir: /app/packages/peer
+    command: ["sh", "generate-peer-ids.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v2/generate-peer-ids.sh:/app/packages/peer/generate-peer-ids.sh
+      - peers_ids:/peer-ids
+
+  # Starts the MobyMask v3 watcher server
+  mobymask-watcher-server:
+    image: cerc/watcher-mobymask-v3:local
+    restart: unless-stopped
+    depends_on:
+      mobymask-watcher-db:
+        condition: service_healthy
+      peer-ids-gen:
+        condition: service_completed_successfully
+      mobymask:
+        condition: service_completed_successfully
+      nitro-contracts:
+        condition: service_completed_successfully
+    env_file:
+      - ../config/watcher-mobymask-v3/mobymask-params.env
+    environment:
+      CERC_SCRIPT_DEBUG: ${CERC_SCRIPT_DEBUG}
+      CERC_ETH_RPC_QUERY_ENDPOINT: ${CERC_ETH_RPC_QUERY_ENDPOINT}
+      CERC_ETH_RPC_MUTATION_ENDPOINT: ${CERC_ETH_RPC_MUTATION_ENDPOINT}
+      CERC_NITRO_CHAIN_URL: ${CERC_NITRO_CHAIN_URL}
+      CERC_RELAY_PEERS: ${CERC_RELAY_PEERS}
+      CERC_DENY_MULTIADDRS: ${CERC_DENY_MULTIADDRS}
+      CERC_PUBSUB: ${CERC_PUBSUB}
+      CERC_RELAY_ANNOUNCE_DOMAIN: ${CERC_RELAY_ANNOUNCE_DOMAIN}
+      CERC_ENABLE_PEER_L2_TXS: ${CERC_ENABLE_PEER_L2_TXS}
+      CERC_DEPLOYED_CONTRACT: ${CERC_DEPLOYED_CONTRACT}
+      CERC_NA_ADDRESS: ${CERC_NA_ADDRESS}
+      CERC_VPA_ADDRESS: ${CERC_VPA_ADDRESS}
+      CERC_CA_ADDRESS: ${CERC_CA_ADDRESS}
+      CERC_PRIVATE_KEY_PEER: ${CERC_PRIVATE_KEY_PEER:-111b7500bdce494d6f4bcfe8c2a0dde2ef92f751d9070fac6475dbd6d8021b3f}
+      CERC_WATCHER_NITRO_PK: ${CERC_WATCHER_NITRO_PK:-0279651921cd800ac560c21ceea27aab0107b67daf436cdd25ce84cad30159b4}
+      CERC_PEER_ID: ${CERC_PEER_ID}
+      CERC_ENABLE_UPSTREAM_PAYMENTS: ${CERC_ENABLE_UPSTREAM_PAYMENTS}
+      CERC_UPSTREAM_NITRO_ADDRESS: ${CERC_UPSTREAM_NITRO_ADDRESS:-0xAAA6628Ec44A8a742987EF3A114dDFE2D4F7aDCE}
+      CERC_UPSTREAM_NITRO_MULTIADDR: ${CERC_UPSTREAM_NITRO_MULTIADDR:-/dns4/ipld-eth-server-1/tcp/5005/ws/p2p/16Uiu2HAmSjXJqsyBJgcBUU2HQmykxGseafSatbpq5471XmuaUqyv}
+      CERC_UPSTREAM_NITRO_PAY_AMOUNT: ${CERC_UPSTREAM_NITRO_PAY_AMOUNT:-100}
+    command: ["bash", "./start-server.sh"]
+    volumes:
+      - ../config/watcher-mobymask-v3/watcher-config-template.toml:/app/environments/watcher-config-template.toml
+      - ../config/watcher-mobymask-v3/watcher-config-rates.toml:/app/environments/rates.toml
+      - ../config/watcher-mobymask-v3/keys:/app/keys
+      - ../config/watcher-mobymask-v3/start-server.sh:/app/start-server.sh
+      - watcher_nitro_data:/app/out/nitro-db
+      - peers_ids:/app/peers
+      - nitro_deployment:/nitro
+      - mobymask_deployment:/server
+    # Expose GQL, metrics and relay node ports
+    ports:
+      - "127.0.0.1:3001:3001"
+      - "127.0.0.1:9001:9001"
+      - "127.0.0.1:9090:9090"
+    healthcheck:
+      test: ["CMD", "busybox", "nc", "localhost", "9090"]
+      interval: 20s
+      timeout: 5s
+      retries: 15
+      start_period: 5s
+    extra_hosts:
+      - "host.docker.internal:host-gateway"
+
+volumes:
+  mobymask_watcher_db_data:
+  peers_ids:
+  mobymask_deployment:
+  nitro_deployment:
+  watcher_nitro_data: