Log represents an protobuf compatible Ethereum Log that defines a contract
log event. These events are generated by the LOG opcode and stored/indexed by
the node.
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| `address` | [string](#string) | | address of the contract that generated the event |
| `topics` | [string](#string) | repeated | list of topics provided by the contract. |
| `data` | [bytes](#bytes) | | supplied by the contract, usually ABI-encoded |
| `block_number` | [uint64](#uint64) | | block in which the transaction was included |
| `tx_hash` | [string](#string) | | hash of the transaction |
| `tx_index` | [uint64](#uint64) | | index of the transaction in the block |
| `block_hash` | [string](#string) | | hash of the block in which the transaction was included |
| `index` | [uint64](#uint64) | | index of the log in the block |
| `removed` | [bool](#bool) | | The Removed field is true if this log was reverted due to a chain reorganisation. You must pay attention to this field if you receive logs through a filter query. |
<aname="ethermint.evm.v1.Params"></a>
### Params
Params defines the EVM module parameters
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| `evm_denom` | [string](#string) | | evm denom represents the token denomination used to run the EVM state transitions. |
| `enable_create` | [bool](#bool) | | enable create toggles state transitions that use the vm.Create function |
| `enable_call` | [bool](#bool) | | enable call toggles state transitions that use the vm.Call function |
| `extra_eips` | [int64](#int64) | repeated | extra eips defines the additional EIPs for the vm.Config |
| `contract_address` | [string](#string) | | contract_address contains the ethereum address of the created contract (if any). If the state transition is an evm.Call, the contract address will be empty. |
| `nonce` | [uint64](#uint64) | | nonce corresponds to the account nonce (transaction sequence). |
| `gas_price` | [string](#string) | | gas price defines the value for each gas unit |
| `gas` | [uint64](#uint64) | | gas defines the gas limit defined for the transaction. |
| `to` | [string](#string) | | hex formatted address of the recipient |
| `value` | [string](#string) | | value defines the unsigned integer value of the transaction amount. |
| `data` | [bytes](#bytes) | | input defines the data payload bytes of the transaction. |
| `v` | [bytes](#bytes) | | v defines the signature value |
| `r` | [bytes](#bytes) | | r defines the signature value |
| `s` | [bytes](#bytes) | | s define the signature value |
<aname="ethermint.evm.v1.MsgEthereumTx"></a>
### MsgEthereumTx
MsgEthereumTx encapsulates an Ethereum transaction as an SDK message.
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| `data` | [google.protobuf.Any](#google.protobuf.Any) | | inner transaction data
caches |
| `size` | [double](#double) | | encoded storage size of the transaction |
| `hash` | [string](#string) | | transaction hash in hex format |
| `from` | [string](#string) | | ethereum signer address in hex format. This address value is checked against the address derived from the signature (V, R, S) using the secp256k1 elliptic curve |
MsgEthereumTxResponse defines the Msg/EthereumTx response type.
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| `hash` | [string](#string) | | ethereum transaction hash in hex format. This hash differs from the Tendermint sha256 hash of the transaction bytes. See https://github.com/tendermint/tendermint/issues/6539 for reference |
| `logs` | [Log](#ethermint.evm.v1.Log) | repeated | logs contains the transaction hash and the proto-compatible ethereum logs. |
| `ret` | [bytes](#bytes) | | returned data from evm function (result or data supplied with revert opcode) |
| `vm_error` | [string](#string) | | vm error is the error returned by vm execution |
| `gas_used` | [uint64](#uint64) | | gas consumed by the transaction |
<!-- end messages -->
<!-- end enums -->
<!-- end HasExtensions -->
<aname="ethermint.evm.v1.Msg"></a>
### Msg
Msg defines the evm Msg service.
| Method Name | Request Type | Response Type | Description | HTTP Verb | Endpoint |
| `predecessors` | [MsgEthereumTx](#ethermint.evm.v1.MsgEthereumTx) | repeated | the predecessor transactions included in the same block need to be replayed first to get correct context for tracing. |
| `block_number` | [int64](#int64) | | block number of requested transaction |
QueryTxLogsRequest is the request type for the Query/TxLogs RPC method.
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| `hash` | [string](#string) | | hash is the ethereum transaction hex hash to query the logs for. |
| `pagination` | [cosmos.base.query.v1beta1.PageRequest](#cosmos.base.query.v1beta1.PageRequest) | | pagination defines an optional pagination for the request. |
QueryTxLogs is the response type for the Query/TxLogs RPC method.
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| `logs` | [Log](#ethermint.evm.v1.Log) | repeated | logs represents the ethereum logs generated from the given transaction. |
| `pagination` | [cosmos.base.query.v1beta1.PageResponse](#cosmos.base.query.v1beta1.PageResponse) | | pagination defines the pagination in the response. |
| `ValidatorAccount` | [QueryValidatorAccountRequest](#ethermint.evm.v1.QueryValidatorAccountRequest) | [QueryValidatorAccountResponse](#ethermint.evm.v1.QueryValidatorAccountResponse) | ValidatorAccount queries an Ethereum account's from a validator consensus Address. | GET|/ethermint/evm/v1/validator_account/{cons_address}|
| `Balance` | [QueryBalanceRequest](#ethermint.evm.v1.QueryBalanceRequest) | [QueryBalanceResponse](#ethermint.evm.v1.QueryBalanceResponse) | Balance queries the balance of a the EVM denomination for a single EthAccount. | GET|/ethermint/evm/v1/balances/{address}|
| `Storage` | [QueryStorageRequest](#ethermint.evm.v1.QueryStorageRequest) | [QueryStorageResponse](#ethermint.evm.v1.QueryStorageResponse) | Storage queries the balance of all coins for a single account. | GET|/ethermint/evm/v1/storage/{address}/{key}|
| `Code` | [QueryCodeRequest](#ethermint.evm.v1.QueryCodeRequest) | [QueryCodeResponse](#ethermint.evm.v1.QueryCodeResponse) | Code queries the balance of all coins for a single account. | GET|/ethermint/evm/v1/codes/{address}|
| `Params` | [QueryParamsRequest](#ethermint.evm.v1.QueryParamsRequest) | [QueryParamsResponse](#ethermint.evm.v1.QueryParamsResponse) | Params queries the parameters of x/evm module. | GET|/ethermint/evm/v1/params|
| `EthCall` | [EthCallRequest](#ethermint.evm.v1.EthCallRequest) | [MsgEthereumTxResponse](#ethermint.evm.v1.MsgEthereumTxResponse) | EthCall implements the `eth_call` rpc api | GET|/ethermint/evm/v1/eth_call|
| `EstimateGas` | [EthCallRequest](#ethermint.evm.v1.EthCallRequest) | [EstimateGasResponse](#ethermint.evm.v1.EstimateGasResponse) | EstimateGas implements the `eth_estimateGas` rpc api | GET|/ethermint/evm/v1/estimate_gas|
| `TraceTx` | [QueryTraceTxRequest](#ethermint.evm.v1.QueryTraceTxRequest) | [QueryTraceTxResponse](#ethermint.evm.v1.QueryTraceTxResponse) | TraceTx implements the `debug_traceTransaction` rpc api | GET|/ethermint/evm/v1/trace_tx|
| `BaseFee` | [QueryBaseFeeRequest](#ethermint.evm.v1.QueryBaseFeeRequest) | [QueryBaseFeeResponse](#ethermint.evm.v1.QueryBaseFeeResponse) | BaseFee queries the base fee of the parent block of the current block, it's similar to feemarket module's method, but also checks london hardfork status. | GET|/ethermint/evm/v1/base_fee|
| `Params` | [QueryParamsRequest](#ethermint.feemarket.v1.QueryParamsRequest) | [QueryParamsResponse](#ethermint.feemarket.v1.QueryParamsResponse) | Params queries the parameters of x/feemarket module. | GET|/ethermint/feemarket/v1/params|
| `BaseFee` | [QueryBaseFeeRequest](#ethermint.feemarket.v1.QueryBaseFeeRequest) | [QueryBaseFeeResponse](#ethermint.feemarket.v1.QueryBaseFeeResponse) | BaseFee queries the base fee of the parent block of the current block. | GET|/ethermint/feemarket/v1/base_fee|
| `BlockGas` | [QueryBlockGasRequest](#ethermint.feemarket.v1.QueryBlockGasRequest) | [QueryBlockGasResponse](#ethermint.feemarket.v1.QueryBlockGasResponse) | BlockGas queries the gas used at a given block height | GET|/ethermint/feemarket/v1/block_gas|
| `typed_data_chain_id` | [uint64](#uint64) | | typed data chain id used only in EIP712 Domain and should match Ethereum network ID in a Web3 provider (e.g. Metamask). |
| `fee_payer` | [string](#string) | | fee payer is an account address for the fee payer. It will be validated during EIP712 signature checking. |
| `fee_payer_sig` | [bytes](#bytes) | | fee payer sig is a signature data from the fee paying account, allows to perform fee delegation when using EIP712 Domain. |
<!-- end messages -->
<!-- end enums -->
<!-- end HasExtensions -->
<!-- end services -->
## Scalar Value Types
| .proto Type | Notes | C++ | Java | Python | Go | C# | PHP | Ruby |
| <aname="int32"/> int32 | Uses variable-length encoding. Inefficient for encoding negative numbers – if your field is likely to have negative values, use sint32 instead. | int32 | int | int | int32 | int | integer | Bignum or Fixnum (as required) |
| <aname="int64"/> int64 | Uses variable-length encoding. Inefficient for encoding negative numbers – if your field is likely to have negative values, use sint64 instead. | int64 | long | int/long | int64 | long | integer/string | Bignum |
| <aname="sint32"/> sint32 | Uses variable-length encoding. Signed int value. These more efficiently encode negative numbers than regular int32s. | int32 | int | int | int32 | int | integer | Bignum or Fixnum (as required) |
| <aname="sint64"/> sint64 | Uses variable-length encoding. Signed int value. These more efficiently encode negative numbers than regular int64s. | int64 | long | int/long | int64 | long | integer/string | Bignum |
| <aname="fixed32"/> fixed32 | Always four bytes. More efficient than uint32 if values are often greater than 2^28. | uint32 | int | int | uint32 | uint | integer | Bignum or Fixnum (as required) |
| <aname="fixed64"/> fixed64 | Always eight bytes. More efficient than uint64 if values are often greater than 2^56. | uint64 | long | int/long | uint64 | ulong | integer/string | Bignum |
| <aname="sfixed32"/> sfixed32 | Always four bytes. | int32 | int | int | int32 | int | integer | Bignum or Fixnum (as required) |
